diff options
Diffstat (limited to 'arch/mips/lantiq/xway/reset.c')
| -rw-r--r-- | arch/mips/lantiq/xway/reset.c | 132 |
1 files changed, 103 insertions, 29 deletions
diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c index 8b66bd87f0c..1fa0f175357 100644 --- a/arch/mips/lantiq/xway/reset.c +++ b/arch/mips/lantiq/xway/reset.c @@ -11,75 +11,149 @@ #include <linux/ioport.h> #include <linux/pm.h> #include <linux/export.h> +#include <linux/delay.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> + #include <asm/reboot.h> #include <lantiq_soc.h> +#include "../prom.h" + #define ltq_rcu_w32(x, y) ltq_w32((x), ltq_rcu_membase + (y)) #define ltq_rcu_r32(x) ltq_r32(ltq_rcu_membase + (x)) -/* register definitions */ -#define LTQ_RCU_RST 0x0010 -#define LTQ_RCU_RST_ALL 0x40000000 - -#define LTQ_RCU_RST_STAT 0x0014 -#define LTQ_RCU_STAT_SHIFT 26 - -static struct resource ltq_rcu_resource = { - .name = "rcu", - .start = LTQ_RCU_BASE_ADDR, - .end = LTQ_RCU_BASE_ADDR + LTQ_RCU_SIZE - 1, - .flags = IORESOURCE_MEM, -}; +/* reset request register */ +#define RCU_RST_REQ 0x0010 +/* reset status register */ +#define RCU_RST_STAT 0x0014 +/* vr9 gphy registers */ +#define RCU_GFS_ADD0_XRX200 0x0020 +#define RCU_GFS_ADD1_XRX200 0x0068 + +/* reboot bit */ +#define RCU_RD_GPHY0_XRX200 BIT(31) +#define RCU_RD_SRST BIT(30) +#define RCU_RD_GPHY1_XRX200 BIT(29) + +/* reset cause */ +#define RCU_STAT_SHIFT 26 +/* boot selection */ +#define RCU_BOOT_SEL(x) ((x >> 18) & 0x7) +#define RCU_BOOT_SEL_XRX200(x) (((x >> 17) & 0xf) | ((x >> 8) & 0x10)) /* remapped base addr of the reset control unit */ static void __iomem *ltq_rcu_membase; +static struct device_node *ltq_rcu_np; /* This function is used by the watchdog driver */ int ltq_reset_cause(void) { - u32 val = ltq_rcu_r32(LTQ_RCU_RST_STAT); - return val >> LTQ_RCU_STAT_SHIFT; + u32 val = ltq_rcu_r32(RCU_RST_STAT); + return val >> RCU_STAT_SHIFT; } EXPORT_SYMBOL_GPL(ltq_reset_cause); +/* allow platform code to find out what source we booted from */ +unsigned char ltq_boot_select(void) +{ + u32 val = ltq_rcu_r32(RCU_RST_STAT); + + if (of_device_is_compatible(ltq_rcu_np, "lantiq,rcu-xrx200")) + return RCU_BOOT_SEL_XRX200(val); + + return RCU_BOOT_SEL(val); +} + +/* reset / boot a gphy */ +static struct ltq_xrx200_gphy_reset { + u32 rd; + u32 addr; +} xrx200_gphy[] = { + {RCU_RD_GPHY0_XRX200, RCU_GFS_ADD0_XRX200}, + {RCU_RD_GPHY1_XRX200, RCU_GFS_ADD1_XRX200}, +}; + +/* reset and boot a gphy. these phys only exist on xrx200 SoC */ +int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr) +{ + struct clk *clk; + + if (!of_device_is_compatible(ltq_rcu_np, "lantiq,rcu-xrx200")) { + dev_err(dev, "this SoC has no GPHY\n"); + return -EINVAL; + } + + clk = clk_get_sys("1f203000.rcu", "gphy"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + clk_enable(clk); + + if (id > 1) { + dev_err(dev, "%u is an invalid gphy id\n", id); + return -EINVAL; + } + dev_info(dev, "booting GPHY%u firmware at %X\n", id, dev_addr); + + ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) | xrx200_gphy[id].rd, + RCU_RST_REQ); + ltq_rcu_w32(dev_addr, xrx200_gphy[id].addr); + ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) & ~xrx200_gphy[id].rd, + RCU_RST_REQ); + return 0; +} + +/* reset a io domain for u micro seconds */ +void ltq_reset_once(unsigned int module, ulong u) +{ + ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) | module, RCU_RST_REQ); + udelay(u); + ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) & ~module, RCU_RST_REQ); +} + static void ltq_machine_restart(char *command) { - pr_notice("System restart\n"); local_irq_disable(); - ltq_rcu_w32(ltq_rcu_r32(LTQ_RCU_RST) | LTQ_RCU_RST_ALL, LTQ_RCU_RST); + ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) | RCU_RD_SRST, RCU_RST_REQ); unreachable(); } static void ltq_machine_halt(void) { - pr_notice("System halted.\n"); local_irq_disable(); unreachable(); } static void ltq_machine_power_off(void) { - pr_notice("Please turn off the power now.\n"); local_irq_disable(); unreachable(); } static int __init mips_reboot_setup(void) { - /* insert and request the memory region */ - if (insert_resource(&iomem_resource, <q_rcu_resource) < 0) - panic("Failed to insert rcu memory"); + struct resource res; + + ltq_rcu_np = of_find_compatible_node(NULL, NULL, "lantiq,rcu-xway"); + if (!ltq_rcu_np) + ltq_rcu_np = of_find_compatible_node(NULL, NULL, + "lantiq,rcu-xrx200"); + + /* check if all the reset register range is available */ + if (!ltq_rcu_np) + panic("Failed to load reset resources from devicetree"); + + if (of_address_to_resource(ltq_rcu_np, 0, &res)) + panic("Failed to get rcu memory range"); - if (request_mem_region(ltq_rcu_resource.start, - resource_size(<q_rcu_resource), "rcu") < 0) - panic("Failed to request rcu memory"); + if (request_mem_region(res.start, resource_size(&res), res.name) < 0) + pr_err("Failed to request rcu memory"); - /* remap rcu register range */ - ltq_rcu_membase = ioremap_nocache(ltq_rcu_resource.start, - resource_size(<q_rcu_resource)); + ltq_rcu_membase = ioremap_nocache(res.start, resource_size(&res)); if (!ltq_rcu_membase) - panic("Failed to remap rcu memory"); + panic("Failed to remap core memory"); _machine_restart = ltq_machine_restart; _machine_halt = ltq_machine_halt; |