diff options
Diffstat (limited to 'arch/mips/kernel/vmlinux.lds.S')
| -rw-r--r-- | arch/mips/kernel/vmlinux.lds.S | 328 |
1 files changed, 171 insertions, 157 deletions
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index 25cc856d8e7..3b46f7ce9ca 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -1,170 +1,184 @@ -#include <linux/config.h> +#include <asm/asm-offsets.h> +#include <asm/thread_info.h> + +#define PAGE_SIZE _PAGE_SIZE + +/* + * Put .bss..swapper_pg_dir as the first thing in .bss. This will + * ensure that it has .bss alignment (64K). + */ +#define BSS_FIRST_SECTIONS *(.bss..swapper_pg_dir) + #include <asm-generic/vmlinux.lds.h> -#undef mips /* CPP really sucks for this job */ +#undef mips #define mips mips OUTPUT_ARCH(mips) ENTRY(kernel_entry) -jiffies = JIFFIES; +PHDRS { + text PT_LOAD FLAGS(7); /* RWX */ + note PT_NOTE FLAGS(4); /* R__ */ +} + +#ifdef CONFIG_32BIT + #ifdef CONFIG_CPU_LITTLE_ENDIAN + jiffies = jiffies_64; + #else + jiffies = jiffies_64 + 4; + #endif +#else + jiffies = jiffies_64; +#endif + SECTIONS { #ifdef CONFIG_BOOT_ELF64 - /* Read-only sections, merged into text segment: */ - /* . = 0xc000000000000000; */ + /* Read-only sections, merged into text segment: */ + /* . = 0xc000000000000000; */ - /* This is the value for an Origin kernel, taken from an IRIX kernel. */ - /* . = 0xc00000000001c000; */ + /* This is the value for an Origin kernel, taken from an IRIX kernel. */ + /* . = 0xc00000000001c000; */ - /* Set the vaddr for the text segment to a value - >= 0xa800 0000 0001 9000 if no symmon is going to configured - >= 0xa800 0000 0030 0000 otherwise */ + /* Set the vaddr for the text segment to a value + * >= 0xa800 0000 0001 9000 if no symmon is going to configured + * >= 0xa800 0000 0030 0000 otherwise + */ - /* . = 0xa800000000300000; */ - /* . = 0xa800000000300000; */ - . = 0xffffffff80300000; + /* . = 0xa800000000300000; */ + . = 0xffffffff80300000; #endif - . = LOADADDR; - /* read-only */ - _text = .; /* Text and read-only data */ - .text : { - *(.text) - SCHED_TEXT - LOCK_TEXT - *(.fixup) - *(.gnu.warning) - } =0 - - _etext = .; /* End of text section */ - - . = ALIGN(16); /* Exception table */ - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - __start___dbe_table = .; /* Exception table for data bus errors */ - __dbe_table : { *(__dbe_table) } - __stop___dbe_table = .; - - RODATA - - /* writeable */ - .data : { /* Data */ - . = . + DATAOFFSET; /* for CONFIG_MAPPED_KERNEL */ - *(.data.init_task) - - *(.data) - - CONSTRUCTORS - } - _gp = . + 0x8000; - .lit8 : { *(.lit8) } - .lit4 : { *(.lit4) } - /* We want the small data sections together, so single-instruction offsets - can access them all, and initialized data all before uninitialized, so - we can shorten the on-disk segment size. */ - .sdata : { *(.sdata) } - - . = ALIGN(4096); - __nosave_begin = .; - .data_nosave : { *(.data.nosave) } - . = ALIGN(4096); - __nosave_end = .; - - . = ALIGN(32); - .data.cacheline_aligned : { *(.data.cacheline_aligned) } - - _edata = .; /* End of data section */ - - /* will be freed after init */ - . = ALIGN(4096); /* Init code and data */ - __init_begin = .; - .init.text : { - _sinittext = .; - *(.init.text) - _einittext = .; - } - .init.data : { *(.init.data) } - . = ALIGN(16); - __setup_start = .; - .init.setup : { *(.init.setup) } - __setup_end = .; - - __initcall_start = .; - .initcall.init : { - *(.initcall1.init) - *(.initcall2.init) - *(.initcall3.init) - *(.initcall4.init) - *(.initcall5.init) - *(.initcall6.init) - *(.initcall7.init) - } - __initcall_end = .; - - __con_initcall_start = .; - .con_initcall.init : { *(.con_initcall.init) } - __con_initcall_end = .; - SECURITY_INIT - . = ALIGN(4096); - __initramfs_start = .; - .init.ramfs : { *(.init.ramfs) } - __initramfs_end = .; - . = ALIGN(32); - __per_cpu_start = .; - .data.percpu : { *(.data.percpu) } - __per_cpu_end = .; - . = ALIGN(4096); - __init_end = .; - /* freed after init ends here */ - - __bss_start = .; /* BSS */ - .sbss : { - *(.sbss) - *(.scommon) - } - .bss : { - *(.bss) - *(COMMON) - } - __bss_stop = .; - - _end = . ; - - /* Sections to be discarded */ - /DISCARD/ : { - *(.exit.text) - *(.exit.data) - *(.exitcall.exit) - - /* ABI crap starts here */ - *(.comment) - *(.MIPS.options) - *(.note) - *(.options) - *(.pdr) - *(.reginfo) - *(.mdebug*) - } - - /* This is the MIPS specific mdebug section. */ - .mdebug : { *(.mdebug) } - /* These are needed for ELF backends which have not yet been - converted to the new style linker. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - /* DWARF debug sections. - Symbols in the .debug DWARF section are relative to the beginning of the - section so we begin .debug at 0. It's not clear yet what needs to happen - for the others. */ - .debug 0 : { *(.debug) } - .debug_srcinfo 0 : { *(.debug_srcinfo) } - .debug_aranges 0 : { *(.debug_aranges) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_sfnames 0 : { *(.debug_sfnames) } - .line 0 : { *(.line) } - /* These must appear regardless of . */ - .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) } - .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) } - .comment : { *(.comment) } - .note : { *(.note) } + . = VMLINUX_LOAD_ADDRESS; + /* read-only */ + _text = .; /* Text and read-only data */ + .text : { + TEXT_TEXT + SCHED_TEXT + LOCK_TEXT + KPROBES_TEXT + IRQENTRY_TEXT + *(.text.*) + *(.fixup) + *(.gnu.warning) + } :text = 0 + _etext = .; /* End of text section */ + + EXCEPTION_TABLE(16) + + /* Exception table for data bus errors */ + __dbe_table : { + __start___dbe_table = .; + *(__dbe_table) + __stop___dbe_table = .; + } + + NOTES :text :note + .dummy : { *(.dummy) } :text + + _sdata = .; /* Start of data section */ + RODATA + + /* writeable */ + .data : { /* Data */ + . = . + DATAOFFSET; /* for CONFIG_MAPPED_KERNEL */ + + INIT_TASK_DATA(THREAD_SIZE) + NOSAVE_DATA + CACHELINE_ALIGNED_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT) + READ_MOSTLY_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT) + DATA_DATA + CONSTRUCTORS + } + _gp = . + 0x8000; + .lit8 : { + *(.lit8) + } + .lit4 : { + *(.lit4) + } + /* We want the small data sections together, so single-instruction offsets + can access them all, and initialized data all before uninitialized, so + we can shorten the on-disk segment size. */ + .sdata : { + *(.sdata) + } + _edata = .; /* End of data section */ + + /* will be freed after init */ + . = ALIGN(PAGE_SIZE); /* Init code and data */ + __init_begin = .; + INIT_TEXT_SECTION(PAGE_SIZE) + INIT_DATA_SECTION(16) + + . = ALIGN(4); + .mips.machines.init : AT(ADDR(.mips.machines.init) - LOAD_OFFSET) { + __mips_machines_start = .; + *(.mips.machines.init) + __mips_machines_end = .; + } + + /* .exit.text is discarded at runtime, not link time, to deal with + * references from .rodata + */ + .exit.text : { + EXIT_TEXT + } + .exit.data : { + EXIT_DATA + } + + PERCPU_SECTION(1 << CONFIG_MIPS_L1_CACHE_SHIFT) + /* + * Align to 64K in attempt to eliminate holes before the + * .bss..swapper_pg_dir section at the start of .bss. This + * also satisfies PAGE_SIZE alignment as the largest page size + * allowed is 64K. + */ + . = ALIGN(0x10000); + __init_end = .; + /* freed after init ends here */ + + /* + * Force .bss to 64K alignment so that .bss..swapper_pg_dir + * gets that alignment. .sbss should be empty, so there will be + * no holes after __init_end. */ + BSS_SECTION(0, 0x10000, 0) + + _end = . ; + + /* These mark the ABI of the kernel for debuggers. */ + .mdebug.abi32 : { + KEEP(*(.mdebug.abi32)) + } + .mdebug.abi64 : { + KEEP(*(.mdebug.abi64)) + } + + /* This is the MIPS specific mdebug section. */ + .mdebug : { + *(.mdebug) + } + + STABS_DEBUG + DWARF_DEBUG + + /* These must appear regardless of . */ + .gptab.sdata : { + *(.gptab.data) + *(.gptab.sdata) + } + .gptab.sbss : { + *(.gptab.bss) + *(.gptab.sbss) + } + + /* Sections to be discarded */ + DISCARDS + /DISCARD/ : { + /* ABI crap starts here */ + *(.MIPS.options) + *(.options) + *(.pdr) + *(.reginfo) + *(.eh_frame) + } } |