1 files changed, 148 insertions, 29 deletions

diff --git a/arch/mips/kernel/kprobes.c b/arch/mips/kernel/kprobes.c
index ee28683fc2a..158467da9bc 100644
--- a/arch/mips/kernel/kprobes.c
+++ b/arch/mips/kernel/kprobes.c
@@ -25,10 +25,12 @@
 
 #include <linux/kprobes.h>
 #include <linux/preempt.h>
+#include <linux/uaccess.h>
 #include <linux/kdebug.h>
 #include <linux/slab.h>
 
 #include <asm/ptrace.h>
+#include <asm/branch.h>
 #include <asm/break.h>
 #include <asm/inst.h>
 
@@ -112,17 +114,49 @@ insn_ok:
 	return 0;
 }
 
+/*
+ * insn_has_ll_or_sc function checks whether instruction is ll or sc
+ * one; putting breakpoint on top of atomic ll/sc pair is bad idea;
+ * so we need to prevent it and refuse kprobes insertion for such
+ * instructions; cannot do much about breakpoint in the middle of
+ * ll/sc pair; it is upto user to avoid those places
+ */
+static int __kprobes insn_has_ll_or_sc(union mips_instruction insn)
+{
+	int ret = 0;
+
+	switch (insn.i_format.opcode) {
+	case ll_op:
+	case lld_op:
+	case sc_op:
+	case scd_op:
+		ret = 1;
+		break;
+	default:
+		break;
+	}
+	return ret;
+}
+
 int __kprobes arch_prepare_kprobe(struct kprobe *p)
 {
 	union mips_instruction insn;
 	union mips_instruction prev_insn;
 	int ret = 0;
 
-	prev_insn = p->addr[-1];
 	insn = p->addr[0];
 
-	if (insn_has_delayslot(insn) || insn_has_delayslot(prev_insn)) {
-		pr_notice("Kprobes for branch and jump instructions are not supported\n");
+	if (insn_has_ll_or_sc(insn)) {
+		pr_notice("Kprobes for ll and sc instructions are not"
+			  "supported\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if ((probe_kernel_read(&prev_insn, p->addr - 1,
+				sizeof(mips_instruction)) == 0) &&
+				insn_has_delayslot(prev_insn)) {
+		pr_notice("Kprobes for branch delayslot are not supported\n");
 		ret = -EINVAL;
 		goto out;
 	}
@@ -138,9 +172,20 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p)
 	 * In the kprobe->ainsn.insn[] array we store the original
 	 * instruction at index zero and a break trap instruction at
 	 * index one.
+	 *
+	 * On MIPS arch if the instruction at probed address is a
+	 * branch instruction, we need to execute the instruction at
+	 * Branch Delayslot (BD) at the time of probe hit. As MIPS also
+	 * doesn't have single stepping support, the BD instruction can
+	 * not be executed in-line and it would be executed on SSOL slot
+	 * using a normal breakpoint instruction in the next slot.
+	 * So, read the instruction and save it for later execution.
 	 */
+	if (insn_has_delayslot(insn))
+		memcpy(&p->ainsn.insn[0], p->addr + 1, sizeof(kprobe_opcode_t));
+	else
+		memcpy(&p->ainsn.insn[0], p->addr, sizeof(kprobe_opcode_t));
 
-	memcpy(&p->ainsn.insn[0], p->addr, sizeof(kprobe_opcode_t));
 	p->ainsn.insn[1] = breakpoint2_insn;
 	p->opcode = *p->addr;
 
@@ -191,16 +236,96 @@ static void set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
 	kcb->kprobe_saved_epc = regs->cp0_epc;
 }
 
-static void prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
+/**
+ * evaluate_branch_instrucion -
+ *
+ * Evaluate the branch instruction at probed address during probe hit. The
+ * result of evaluation would be the updated epc. The insturction in delayslot
+ * would actually be single stepped using a normal breakpoint) on SSOL slot.
+ *
+ * The result is also saved in the kprobe control block for later use,
+ * in case we need to execute the delayslot instruction. The latter will be
+ * false for NOP instruction in dealyslot and the branch-likely instructions
+ * when the branch is taken. And for those cases we set a flag as
+ * SKIP_DELAYSLOT in the kprobe control block
+ */
+static int evaluate_branch_instruction(struct kprobe *p, struct pt_regs *regs,
+					struct kprobe_ctlblk *kcb)
 {
+	union mips_instruction insn = p->opcode;
+	long epc;
+	int ret = 0;
+
+	epc = regs->cp0_epc;
+	if (epc & 3)
+		goto unaligned;
+
+	if (p->ainsn.insn->word == 0)
+		kcb->flags |= SKIP_DELAYSLOT;
+	else
+		kcb->flags &= ~SKIP_DELAYSLOT;
+
+	ret = __compute_return_epc_for_insn(regs, insn);
+	if (ret < 0)
+		return ret;
+
+	if (ret == BRANCH_LIKELY_TAKEN)
+		kcb->flags |= SKIP_DELAYSLOT;
+
+	kcb->target_epc = regs->cp0_epc;
+
+	return 0;
+
+unaligned:
+	pr_notice("%s: unaligned epc - sending SIGBUS.\n", current->comm);
+	force_sig(SIGBUS, current);
+	return -EFAULT;
+
+}
+
+static void prepare_singlestep(struct kprobe *p, struct pt_regs *regs,
+						struct kprobe_ctlblk *kcb)
+{
+	int ret = 0;
+
 	regs->cp0_status &= ~ST0_IE;
 
 	/* single step inline if the instruction is a break */
 	if (p->opcode.word == breakpoint_insn.word ||
 	    p->opcode.word == breakpoint2_insn.word)
 		regs->cp0_epc = (unsigned long)p->addr;
-	else
-		regs->cp0_epc = (unsigned long)&p->ainsn.insn[0];
+	else if (insn_has_delayslot(p->opcode)) {
+		ret = evaluate_branch_instruction(p, regs, kcb);
+		if (ret < 0) {
+			pr_notice("Kprobes: Error in evaluating branch\n");
+			return;
+		}
+	}
+	regs->cp0_epc = (unsigned long)&p->ainsn.insn[0];
+}
+
+/*
+ * Called after single-stepping.  p->addr is the address of the
+ * instruction whose first byte has been replaced by the "break 0"
+ * instruction.  To avoid the SMP problems that can occur when we
+ * temporarily put back the original opcode to single-step, we
+ * single-stepped a copy of the instruction.  The address of this
+ * copy is p->ainsn.insn.
+ *
+ * This function prepares to return from the post-single-step
+ * breakpoint trap. In case of branch instructions, the target
+ * epc to be restored.
+ */
+static void __kprobes resume_execution(struct kprobe *p,
+				       struct pt_regs *regs,
+				       struct kprobe_ctlblk *kcb)
+{
+	if (insn_has_delayslot(p->opcode))
+		regs->cp0_epc = kcb->target_epc;
+	else {
+		unsigned long orig_epc = kcb->kprobe_saved_epc;
+		regs->cp0_epc = orig_epc + 4;
+	}
 }
 
 static int __kprobes kprobe_handler(struct pt_regs *regs)
@@ -239,8 +364,13 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 			save_previous_kprobe(kcb);
 			set_current_kprobe(p, regs, kcb);
 			kprobes_inc_nmissed_count(p);
-			prepare_singlestep(p, regs);
+			prepare_singlestep(p, regs, kcb);
 			kcb->kprobe_status = KPROBE_REENTER;
+			if (kcb->flags & SKIP_DELAYSLOT) {
+				resume_execution(p, regs, kcb);
+				restore_previous_kprobe(kcb);
+				preempt_enable_no_resched();
+			}
 			return 1;
 		} else {
 			if (addr->word != breakpoint_insn.word) {
@@ -284,8 +414,16 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 	}
 
 ss_probe:
-	prepare_singlestep(p, regs);
-	kcb->kprobe_status = KPROBE_HIT_SS;
+	prepare_singlestep(p, regs, kcb);
+	if (kcb->flags & SKIP_DELAYSLOT) {
+		kcb->kprobe_status = KPROBE_HIT_SSDONE;
+		if (p->post_handler)
+			p->post_handler(p, regs, 0);
+		resume_execution(p, regs, kcb);
+		preempt_enable_no_resched();
+	} else
+		kcb->kprobe_status = KPROBE_HIT_SS;
+
 	return 1;
 
 no_kprobe:
@@ -294,25 +432,6 @@ no_kprobe:
 
 }
 
-/*
- * Called after single-stepping.  p->addr is the address of the
- * instruction whose first byte has been replaced by the "break 0"
- * instruction.  To avoid the SMP problems that can occur when we
- * temporarily put back the original opcode to single-step, we
- * single-stepped a copy of the instruction.  The address of this
- * copy is p->ainsn.insn.
- *
- * This function prepares to return from the post-single-step
- * breakpoint trap.
- */
-static void __kprobes resume_execution(struct kprobe *p,
-				       struct pt_regs *regs,
-				       struct kprobe_ctlblk *kcb)
-{
-	unsigned long orig_epc = kcb->kprobe_saved_epc;
-	regs->cp0_epc = orig_epc + 4;
-}
-
 static inline int post_kprobe_handler(struct pt_regs *regs)
 {
 	struct kprobe *cur = kprobe_running();