diff options
Diffstat (limited to 'arch/mips/include/asm/netlogic')
| -rw-r--r-- | arch/mips/include/asm/netlogic/common.h | 45 | ||||
| -rw-r--r-- | arch/mips/include/asm/netlogic/haldefs.h | 92 | ||||
| -rw-r--r-- | arch/mips/include/asm/netlogic/mips-extns.h | 28 | ||||
| -rw-r--r-- | arch/mips/include/asm/netlogic/xlp-hal/bridge.h | 69 | ||||
| -rw-r--r-- | arch/mips/include/asm/netlogic/xlp-hal/iomap.h | 70 | ||||
| -rw-r--r-- | arch/mips/include/asm/netlogic/xlp-hal/pcibus.h | 55 | ||||
| -rw-r--r-- | arch/mips/include/asm/netlogic/xlp-hal/pic.h | 139 | ||||
| -rw-r--r-- | arch/mips/include/asm/netlogic/xlp-hal/sys.h | 84 | ||||
| -rw-r--r-- | arch/mips/include/asm/netlogic/xlp-hal/uart.h | 3 | ||||
| -rw-r--r-- | arch/mips/include/asm/netlogic/xlp-hal/usb.h | 64 | ||||
| -rw-r--r-- | arch/mips/include/asm/netlogic/xlp-hal/xlp.h | 62 | ||||
| -rw-r--r-- | arch/mips/include/asm/netlogic/xlr/fmn.h | 12 | ||||
| -rw-r--r-- | arch/mips/include/asm/netlogic/xlr/pic.h | 2 | ||||
| -rw-r--r-- | arch/mips/include/asm/netlogic/xlr/xlr.h | 5 |
14 files changed, 439 insertions, 291 deletions
diff --git a/arch/mips/include/asm/netlogic/common.h b/arch/mips/include/asm/netlogic/common.h index aef560a51a7..c281f03eb31 100644 --- a/arch/mips/include/asm/netlogic/common.h +++ b/arch/mips/include/asm/netlogic/common.h @@ -39,11 +39,17 @@ * Common SMP definitions */ #define RESET_VEC_PHYS 0x1fc00000 +#define RESET_VEC_SIZE 8192 /* 8KB reset code and data */ #define RESET_DATA_PHYS (RESET_VEC_PHYS + (1<<10)) + +/* Offsets of parameters in the RESET_DATA_PHYS area */ #define BOOT_THREAD_MODE 0 #define BOOT_NMI_LOCK 4 #define BOOT_NMI_HANDLER 8 +/* CPU ready flags for each CPU */ +#define BOOT_CPU_READY 2048 + #ifndef __ASSEMBLY__ #include <linux/cpumask.h> #include <linux/spinlock.h> @@ -59,46 +65,44 @@ int nlm_wakeup_secondary_cpus(void); void nlm_rmiboot_preboot(void); void nlm_percpu_init(int hwcpuid); +static inline void * +nlm_get_boot_data(int offset) +{ + return (void *)(CKSEG1ADDR(RESET_DATA_PHYS) + offset); +} + static inline void nlm_set_nmi_handler(void *handler) { - char *reset_data; + void *nmih = nlm_get_boot_data(BOOT_NMI_HANDLER); - reset_data = (char *)CKSEG1ADDR(RESET_DATA_PHYS); - *(int64_t *)(reset_data + BOOT_NMI_HANDLER) = (long)handler; + *(int64_t *)nmih = (long)handler; } /* * Misc. */ +void nlm_init_boot_cpu(void); unsigned int nlm_get_cpu_frequency(void); -void nlm_node_init(int node); extern struct plat_smp_ops nlm_smp_ops; extern char nlm_reset_entry[], nlm_reset_entry_end[]; +/* SWIOTLB */ +extern struct dma_map_ops nlm_swiotlb_dma_ops; + extern unsigned int nlm_threads_per_core; extern cpumask_t nlm_cpumask; -struct nlm_soc_info { - unsigned long coremask; /* cores enabled on the soc */ - unsigned long ebase; - uint64_t irqmask; - uint64_t sysbase; /* only for XLP */ - uint64_t picbase; - spinlock_t piclock; -}; - -#define nlm_get_node(i) (&nlm_nodes[i]) -#ifdef CONFIG_CPU_XLR -#define nlm_current_node() (&nlm_nodes[0]) -#else -#define nlm_current_node() (&nlm_nodes[nlm_nodeid()]) -#endif - struct irq_data; uint64_t nlm_pci_irqmask(int node); +void nlm_setup_pic_irq(int node, int picirq, int irq, int irt); void nlm_set_pic_extra_ack(int node, int irq, void (*xack)(struct irq_data *)); +#ifdef CONFIG_PCI_MSI +void nlm_dispatch_msi(int node, int lirq); +void nlm_dispatch_msix(int node, int msixirq); +#endif + /* * The NR_IRQs is divided between nodes, each of them has a separate irq space */ @@ -107,7 +111,6 @@ static inline int nlm_irq_to_xirq(int node, int irq) return node * NR_IRQS / NLM_NR_NODES + irq; } -extern struct nlm_soc_info nlm_nodes[NLM_NR_NODES]; extern int nlm_cpu_ready[]; #endif #endif /* _NETLOGIC_COMMON_H_ */ diff --git a/arch/mips/include/asm/netlogic/haldefs.h b/arch/mips/include/asm/netlogic/haldefs.h index 419d8aef856..79c7cccdc22 100644 --- a/arch/mips/include/asm/netlogic/haldefs.h +++ b/arch/mips/include/asm/netlogic/haldefs.h @@ -35,42 +35,13 @@ #ifndef __NLM_HAL_HALDEFS_H__ #define __NLM_HAL_HALDEFS_H__ +#include <linux/irqflags.h> /* for local_irq_disable */ + /* * This file contains platform specific memory mapped IO implementation * and will provide a way to read 32/64 bit memory mapped registers in * all ABIs */ -#if !defined(CONFIG_64BIT) && defined(CONFIG_CPU_XLP) -#error "o32 compile not supported on XLP yet" -#endif -/* - * For o32 compilation, we have to disable interrupts and enable KX bit to - * access 64 bit addresses or data. - * - * We need to disable interrupts because we save just the lower 32 bits of - * registers in interrupt handling. So if we get hit by an interrupt while - * using the upper 32 bits of a register, we lose. - */ -static inline uint32_t nlm_save_flags_kx(void) -{ - return change_c0_status(ST0_KX | ST0_IE, ST0_KX); -} - -static inline uint32_t nlm_save_flags_cop2(void) -{ - return change_c0_status(ST0_CU2 | ST0_IE, ST0_CU2); -} - -static inline void nlm_restore_flags(uint32_t sr) -{ - write_c0_status(sr); -} - -/* - * The n64 implementations are simple, the o32 implementations when they - * are added, will have to disable interrupts and enable KX before doing - * 64 bit ops. - */ static inline uint32_t nlm_read_reg(uint64_t base, uint32_t reg) { @@ -87,13 +58,40 @@ nlm_write_reg(uint64_t base, uint32_t reg, uint32_t val) *addr = val; } +/* + * For o32 compilation, we have to disable interrupts to access 64 bit + * registers + * + * We need to disable interrupts because we save just the lower 32 bits of + * registers in interrupt handling. So if we get hit by an interrupt while + * using the upper 32 bits of a register, we lose. + */ + static inline uint64_t nlm_read_reg64(uint64_t base, uint32_t reg) { uint64_t addr = base + (reg >> 1) * sizeof(uint64_t); volatile uint64_t *ptr = (volatile uint64_t *)(long)addr; - - return *ptr; + uint64_t val; + + if (sizeof(unsigned long) == 4) { + unsigned long flags; + + local_irq_save(flags); + __asm__ __volatile__( + ".set push" "\n\t" + ".set mips64" "\n\t" + "ld %L0, %1" "\n\t" + "dsra32 %M0, %L0, 0" "\n\t" + "sll %L0, %L0, 0" "\n\t" + ".set pop" "\n" + : "=r" (val) + : "m" (*ptr)); + local_irq_restore(flags); + } else + val = *ptr; + + return val; } static inline void @@ -102,7 +100,25 @@ nlm_write_reg64(uint64_t base, uint32_t reg, uint64_t val) uint64_t addr = base + (reg >> 1) * sizeof(uint64_t); volatile uint64_t *ptr = (volatile uint64_t *)(long)addr; - *ptr = val; + if (sizeof(unsigned long) == 4) { + unsigned long flags; + uint64_t tmp; + + local_irq_save(flags); + __asm__ __volatile__( + ".set push" "\n\t" + ".set mips64" "\n\t" + "dsll32 %L0, %L0, 0" "\n\t" + "dsrl32 %L0, %L0, 0" "\n\t" + "dsll32 %M0, %M0, 0" "\n\t" + "or %L0, %L0, %M0" "\n\t" + "sd %L0, %2" "\n\t" + ".set pop" "\n" + : "=r" (tmp) + : "0" (val), "m" (*ptr)); + local_irq_restore(flags); + } else + *ptr = val; } /* @@ -143,14 +159,6 @@ nlm_pcicfg_base(uint32_t devoffset) return nlm_io_base + devoffset; } -static inline uint64_t -nlm_xkphys_map_pcibar0(uint64_t pcibase) -{ - uint64_t paddr; - - paddr = nlm_read_reg(pcibase, 0x4) & ~0xfu; - return (uint64_t)0x9000000000000000 | paddr; -} #elif defined(CONFIG_CPU_XLR) static inline uint64_t diff --git a/arch/mips/include/asm/netlogic/mips-extns.h b/arch/mips/include/asm/netlogic/mips-extns.h index 8ad2e0f8171..06f1f75bfa9 100644 --- a/arch/mips/include/asm/netlogic/mips-extns.h +++ b/arch/mips/include/asm/netlogic/mips-extns.h @@ -38,21 +38,16 @@ /* * XLR and XLP interrupt request and interrupt mask registers */ -#define read_c0_eirr() __read_64bit_c0_register($9, 6) -#define read_c0_eimr() __read_64bit_c0_register($9, 7) -#define write_c0_eirr(val) __write_64bit_c0_register($9, 6, val) - /* - * Writing EIMR in 32 bit is a special case, the lower 8 bit of the - * EIMR is shadowed in the status register, so we cannot save and - * restore status register for split read. + * NOTE: Do not save/restore flags around write_c0_eimr(). + * On non-R2 platforms the flags has part of EIMR that is shadowed in STATUS + * register. Restoring flags will overwrite the lower 8 bits of EIMR. + * + * Call with interrupts disabled. */ #define write_c0_eimr(val) \ do { \ if (sizeof(unsigned long) == 4) { \ - unsigned long __flags; \ - \ - local_irq_save(__flags); \ __asm__ __volatile__( \ ".set\tmips64\n\t" \ "dsll\t%L0, %L0, 32\n\t" \ @@ -62,8 +57,6 @@ do { \ "dmtc0\t%L0, $9, 7\n\t" \ ".set\tmips0" \ : : "r" (val)); \ - __flags = (__flags & 0xffff00ff) | (((val) & 0xff) << 8);\ - local_irq_restore(__flags); \ } else \ __write_64bit_c0_register($9, 7, (val)); \ } while (0) @@ -128,7 +121,7 @@ static inline uint64_t read_c0_eirr_and_eimr(void) uint64_t val; #ifdef CONFIG_64BIT - val = read_c0_eimr() & read_c0_eirr(); + val = __read_64bit_c0_register($9, 6) & __read_64bit_c0_register($9, 7); #else __asm__ __volatile__( ".set push\n\t" @@ -143,7 +136,6 @@ static inline uint64_t read_c0_eirr_and_eimr(void) ".set pop" : "=r" (val)); #endif - return val; } @@ -154,7 +146,13 @@ static inline int hard_smp_processor_id(void) static inline int nlm_nodeid(void) { - return (__read_32bit_c0_register($15, 1) >> 5) & 0x3; + uint32_t prid = read_c0_prid() & PRID_IMP_MASK; + + if ((prid == PRID_IMP_NETLOGIC_XLP9XX) || + (prid == PRID_IMP_NETLOGIC_XLP5XX)) + return (__read_32bit_c0_register($15, 1) >> 7) & 0x7; + else + return (__read_32bit_c0_register($15, 1) >> 5) & 0x3; } static inline unsigned int nlm_core_id(void) diff --git a/arch/mips/include/asm/netlogic/xlp-hal/bridge.h b/arch/mips/include/asm/netlogic/xlp-hal/bridge.h index 790f0f1e55c..3067f983495 100644 --- a/arch/mips/include/asm/netlogic/xlp-hal/bridge.h +++ b/arch/mips/include/asm/netlogic/xlp-hal/bridge.h @@ -69,41 +69,10 @@ #define BRIDGE_FLASH_LIMIT3 0x13 #define BRIDGE_DRAM_BAR(i) (0x14 + (i)) -#define BRIDGE_DRAM_BAR0 0x14 -#define BRIDGE_DRAM_BAR1 0x15 -#define BRIDGE_DRAM_BAR2 0x16 -#define BRIDGE_DRAM_BAR3 0x17 -#define BRIDGE_DRAM_BAR4 0x18 -#define BRIDGE_DRAM_BAR5 0x19 -#define BRIDGE_DRAM_BAR6 0x1a -#define BRIDGE_DRAM_BAR7 0x1b - #define BRIDGE_DRAM_LIMIT(i) (0x1c + (i)) -#define BRIDGE_DRAM_LIMIT0 0x1c -#define BRIDGE_DRAM_LIMIT1 0x1d -#define BRIDGE_DRAM_LIMIT2 0x1e -#define BRIDGE_DRAM_LIMIT3 0x1f -#define BRIDGE_DRAM_LIMIT4 0x20 -#define BRIDGE_DRAM_LIMIT5 0x21 -#define BRIDGE_DRAM_LIMIT6 0x22 -#define BRIDGE_DRAM_LIMIT7 0x23 +#define BRIDGE_DRAM_NODE_TRANSLN(i) (0x24 + (i)) +#define BRIDGE_DRAM_CHNL_TRANSLN(i) (0x2c + (i)) -#define BRIDGE_DRAM_NODE_TRANSLN0 0x24 -#define BRIDGE_DRAM_NODE_TRANSLN1 0x25 -#define BRIDGE_DRAM_NODE_TRANSLN2 0x26 -#define BRIDGE_DRAM_NODE_TRANSLN3 0x27 -#define BRIDGE_DRAM_NODE_TRANSLN4 0x28 -#define BRIDGE_DRAM_NODE_TRANSLN5 0x29 -#define BRIDGE_DRAM_NODE_TRANSLN6 0x2a -#define BRIDGE_DRAM_NODE_TRANSLN7 0x2b -#define BRIDGE_DRAM_CHNL_TRANSLN0 0x2c -#define BRIDGE_DRAM_CHNL_TRANSLN1 0x2d -#define BRIDGE_DRAM_CHNL_TRANSLN2 0x2e -#define BRIDGE_DRAM_CHNL_TRANSLN3 0x2f -#define BRIDGE_DRAM_CHNL_TRANSLN4 0x30 -#define BRIDGE_DRAM_CHNL_TRANSLN5 0x31 -#define BRIDGE_DRAM_CHNL_TRANSLN6 0x32 -#define BRIDGE_DRAM_CHNL_TRANSLN7 0x33 #define BRIDGE_PCIEMEM_BASE0 0x34 #define BRIDGE_PCIEMEM_BASE1 0x35 #define BRIDGE_PCIEMEM_BASE2 0x36 @@ -174,12 +143,42 @@ #define BRIDGE_GIO_WEIGHT 0x2cb #define BRIDGE_FLASH_WEIGHT 0x2cc +/* FIXME verify */ +#define BRIDGE_9XX_FLASH_BAR(i) (0x11 + (i)) +#define BRIDGE_9XX_FLASH_BAR_LIMIT(i) (0x15 + (i)) + +#define BRIDGE_9XX_DRAM_BAR(i) (0x19 + (i)) +#define BRIDGE_9XX_DRAM_LIMIT(i) (0x29 + (i)) +#define BRIDGE_9XX_DRAM_NODE_TRANSLN(i) (0x39 + (i)) +#define BRIDGE_9XX_DRAM_CHNL_TRANSLN(i) (0x49 + (i)) + +#define BRIDGE_9XX_ADDRESS_ERROR0 0x9d +#define BRIDGE_9XX_ADDRESS_ERROR1 0x9e +#define BRIDGE_9XX_ADDRESS_ERROR2 0x9f + +#define BRIDGE_9XX_PCIEMEM_BASE0 0x59 +#define BRIDGE_9XX_PCIEMEM_BASE1 0x5a +#define BRIDGE_9XX_PCIEMEM_BASE2 0x5b +#define BRIDGE_9XX_PCIEMEM_BASE3 0x5c +#define BRIDGE_9XX_PCIEMEM_LIMIT0 0x5d +#define BRIDGE_9XX_PCIEMEM_LIMIT1 0x5e +#define BRIDGE_9XX_PCIEMEM_LIMIT2 0x5f +#define BRIDGE_9XX_PCIEMEM_LIMIT3 0x60 +#define BRIDGE_9XX_PCIEIO_BASE0 0x61 +#define BRIDGE_9XX_PCIEIO_BASE1 0x62 +#define BRIDGE_9XX_PCIEIO_BASE2 0x63 +#define BRIDGE_9XX_PCIEIO_BASE3 0x64 +#define BRIDGE_9XX_PCIEIO_LIMIT0 0x65 +#define BRIDGE_9XX_PCIEIO_LIMIT1 0x66 +#define BRIDGE_9XX_PCIEIO_LIMIT2 0x67 +#define BRIDGE_9XX_PCIEIO_LIMIT3 0x68 + #ifndef __ASSEMBLY__ #define nlm_read_bridge_reg(b, r) nlm_read_reg(b, r) #define nlm_write_bridge_reg(b, r, v) nlm_write_reg(b, r, v) -#define nlm_get_bridge_pcibase(node) \ - nlm_pcicfg_base(XLP_IO_BRIDGE_OFFSET(node)) +#define nlm_get_bridge_pcibase(node) nlm_pcicfg_base(cpu_is_xlp9xx() ? \ + XLP9XX_IO_BRIDGE_OFFSET(node) : XLP_IO_BRIDGE_OFFSET(node)) #define nlm_get_bridge_regbase(node) \ (nlm_get_bridge_pcibase(node) + XLP_IO_PCI_HDRSZ) diff --git a/arch/mips/include/asm/netlogic/xlp-hal/iomap.h b/arch/mips/include/asm/netlogic/xlp-hal/iomap.h index 9fac46fb791..805bfd21f33 100644 --- a/arch/mips/include/asm/netlogic/xlp-hal/iomap.h +++ b/arch/mips/include/asm/netlogic/xlp-hal/iomap.h @@ -48,8 +48,10 @@ #define XLP_IO_SIZE (64 << 20) /* ECFG space size */ #define XLP_IO_PCI_HDRSZ 0x100 #define XLP_IO_DEV(node, dev) ((dev) + (node) * 8) -#define XLP_HDR_OFFSET(node, bus, dev, fn) (((bus) << 20) | \ - ((XLP_IO_DEV(node, dev)) << 15) | ((fn) << 12)) +#define XLP_IO_PCI_OFFSET(b, d, f) (((b) << 20) | ((d) << 15) | ((f) << 12)) + +#define XLP_HDR_OFFSET(node, bus, dev, fn) \ + XLP_IO_PCI_OFFSET(bus, XLP_IO_DEV(node, dev), fn) #define XLP_IO_BRIDGE_OFFSET(node) XLP_HDR_OFFSET(node, 0, 0, 0) /* coherent inter chip */ @@ -72,6 +74,14 @@ #define XLP_IO_USB_OHCI2_OFFSET(node) XLP_HDR_OFFSET(node, 0, 2, 4) #define XLP_IO_USB_OHCI3_OFFSET(node) XLP_HDR_OFFSET(node, 0, 2, 5) +#define XLP_IO_SATA_OFFSET(node) XLP_HDR_OFFSET(node, 0, 3, 2) + +/* XLP2xx has an updated USB block */ +#define XLP2XX_IO_USB_OFFSET(node, i) XLP_HDR_OFFSET(node, 0, 4, i) +#define XLP2XX_IO_USB_XHCI0_OFFSET(node) XLP_HDR_OFFSET(node, 0, 4, 1) +#define XLP2XX_IO_USB_XHCI1_OFFSET(node) XLP_HDR_OFFSET(node, 0, 4, 2) +#define XLP2XX_IO_USB_XHCI2_OFFSET(node) XLP_HDR_OFFSET(node, 0, 4, 3) + #define XLP_IO_NAE_OFFSET(node) XLP_HDR_OFFSET(node, 0, 3, 0) #define XLP_IO_POE_OFFSET(node) XLP_HDR_OFFSET(node, 0, 3, 1) @@ -88,17 +98,50 @@ #define XLP_IO_I2C0_OFFSET(node) XLP_HDR_OFFSET(node, 0, 6, 2) #define XLP_IO_I2C1_OFFSET(node) XLP_HDR_OFFSET(node, 0, 6, 3) #define XLP_IO_GPIO_OFFSET(node) XLP_HDR_OFFSET(node, 0, 6, 4) +/* on 2XX, all I2C busses are on the same block */ +#define XLP2XX_IO_I2C_OFFSET(node) XLP_HDR_OFFSET(node, 0, 6, 7) + /* system management */ #define XLP_IO_SYS_OFFSET(node) XLP_HDR_OFFSET(node, 0, 6, 5) #define XLP_IO_JTAG_OFFSET(node) XLP_HDR_OFFSET(node, 0, 6, 6) +/* Flash */ #define XLP_IO_NOR_OFFSET(node) XLP_HDR_OFFSET(node, 0, 7, 0) #define XLP_IO_NAND_OFFSET(node) XLP_HDR_OFFSET(node, 0, 7, 1) #define XLP_IO_SPI_OFFSET(node) XLP_HDR_OFFSET(node, 0, 7, 2) -/* SD flash */ -#define XLP_IO_SD_OFFSET(node) XLP_HDR_OFFSET(node, 0, 7, 3) -#define XLP_IO_MMC_OFFSET(node, slot) \ - ((XLP_IO_SD_OFFSET(node))+(slot*0x100)+XLP_IO_PCI_HDRSZ) +#define XLP_IO_MMC_OFFSET(node) XLP_HDR_OFFSET(node, 0, 7, 3) + +/* Things have changed drastically in XLP 9XX */ +#define XLP9XX_HDR_OFFSET(n, d, f) \ + XLP_IO_PCI_OFFSET(xlp9xx_get_socbus(n), d, f) + +#define XLP9XX_IO_BRIDGE_OFFSET(node) XLP_IO_PCI_OFFSET(0, 0, node) +#define XLP9XX_IO_PIC_OFFSET(node) XLP9XX_HDR_OFFSET(node, 2, 0) +#define XLP9XX_IO_UART_OFFSET(node) XLP9XX_HDR_OFFSET(node, 2, 2) +#define XLP9XX_IO_SYS_OFFSET(node) XLP9XX_HDR_OFFSET(node, 6, 0) +#define XLP9XX_IO_FUSE_OFFSET(node) XLP9XX_HDR_OFFSET(node, 6, 1) +#define XLP9XX_IO_CLOCK_OFFSET(node) XLP9XX_HDR_OFFSET(node, 6, 2) +#define XLP9XX_IO_POWER_OFFSET(node) XLP9XX_HDR_OFFSET(node, 6, 3) +#define XLP9XX_IO_JTAG_OFFSET(node) XLP9XX_HDR_OFFSET(node, 6, 4) + +#define XLP9XX_IO_PCIE_OFFSET(node, i) XLP9XX_HDR_OFFSET(node, 1, i) +#define XLP9XX_IO_PCIE0_OFFSET(node) XLP9XX_HDR_OFFSET(node, 1, 0) +#define XLP9XX_IO_PCIE2_OFFSET(node) XLP9XX_HDR_OFFSET(node, 1, 2) +#define XLP9XX_IO_PCIE3_OFFSET(node) XLP9XX_HDR_OFFSET(node, 1, 3) + +/* XLP9xx USB block */ +#define XLP9XX_IO_USB_OFFSET(node, i) XLP9XX_HDR_OFFSET(node, 4, i) +#define XLP9XX_IO_USB_XHCI0_OFFSET(node) XLP9XX_HDR_OFFSET(node, 4, 1) +#define XLP9XX_IO_USB_XHCI1_OFFSET(node) XLP9XX_HDR_OFFSET(node, 4, 2) + +/* XLP9XX on-chip SATA controller */ +#define XLP9XX_IO_SATA_OFFSET(node) XLP9XX_HDR_OFFSET(node, 3, 2) + +/* Flash */ +#define XLP9XX_IO_NOR_OFFSET(node) XLP9XX_HDR_OFFSET(node, 7, 0) +#define XLP9XX_IO_NAND_OFFSET(node) XLP9XX_HDR_OFFSET(node, 7, 1) +#define XLP9XX_IO_SPI_OFFSET(node) XLP9XX_HDR_OFFSET(node, 7, 2) +#define XLP9XX_IO_MMC_OFFSET(node) XLP9XX_HDR_OFFSET(node, 7, 3) /* PCI config header register id's */ #define XLP_PCI_CFGREG0 0x00 @@ -145,12 +188,27 @@ #define PCI_DEVICE_ID_NLM_NOR 0x1015 #define PCI_DEVICE_ID_NLM_NAND 0x1016 #define PCI_DEVICE_ID_NLM_MMC 0x1018 +#define PCI_DEVICE_ID_NLM_SATA 0x101A +#define PCI_DEVICE_ID_NLM_XHCI 0x101D + +#define PCI_DEVICE_ID_XLP9XX_MMC 0x9018 +#define PCI_DEVICE_ID_XLP9XX_SATA 0x901A +#define PCI_DEVICE_ID_XLP9XX_XHCI 0x901D #ifndef __ASSEMBLY__ #define nlm_read_pci_reg(b, r) nlm_read_reg(b, r) #define nlm_write_pci_reg(b, r, v) nlm_write_reg(b, r, v) +static inline int xlp9xx_get_socbus(int node) +{ + uint64_t socbridge; + + if (node == 0) + return 1; + socbridge = nlm_pcicfg_base(XLP9XX_IO_BRIDGE_OFFSET(node)); + return (nlm_read_pci_reg(socbridge, 0x6) >> 8) & 0xff; +} #endif /* !__ASSEMBLY */ #endif /* __NLM_HAL_IOMAP_H__ */ diff --git a/arch/mips/include/asm/netlogic/xlp-hal/pcibus.h b/arch/mips/include/asm/netlogic/xlp-hal/pcibus.h index b559cb9f56e..91540f41e1e 100644 --- a/arch/mips/include/asm/netlogic/xlp-hal/pcibus.h +++ b/arch/mips/include/asm/netlogic/xlp-hal/pcibus.h @@ -52,25 +52,62 @@ #define PCIE_BYTE_SWAP_MEM_LIM 0x248 #define PCIE_BYTE_SWAP_IO_BASE 0x249 #define PCIE_BYTE_SWAP_IO_LIM 0x24A + +#define PCIE_BRIDGE_MSIX_ADDR_BASE 0x24F +#define PCIE_BRIDGE_MSIX_ADDR_LIMIT 0x250 #define PCIE_MSI_STATUS 0x25A #define PCIE_MSI_EN 0x25B +#define PCIE_MSIX_STATUS 0x25D +#define PCIE_INT_STATUS0 0x25F +#define PCIE_INT_STATUS1 0x260 #define PCIE_INT_EN0 0x261 +#define PCIE_INT_EN1 0x262 + +/* XLP9XX has basic changes */ +#define PCIE_9XX_BYTE_SWAP_MEM_BASE 0x25c +#define PCIE_9XX_BYTE_SWAP_MEM_LIM 0x25d +#define PCIE_9XX_BYTE_SWAP_IO_BASE 0x25e +#define PCIE_9XX_BYTE_SWAP_IO_LIM 0x25f -/* PCIE_MSI_EN */ -#define PCIE_MSI_VECTOR_INT_EN 0xFFFFFFFF +#define PCIE_9XX_BRIDGE_MSIX_ADDR_BASE 0x264 +#define PCIE_9XX_BRIDGE_MSIX_ADDR_LIMIT 0x265 +#define PCIE_9XX_MSI_STATUS 0x283 +#define PCIE_9XX_MSI_EN 0x284 +/* 128 MSIX vectors available in 9xx */ +#define PCIE_9XX_MSIX_STATUS0 0x286 +#define PCIE_9XX_MSIX_STATUSX(n) (n + 0x286) +#define PCIE_9XX_MSIX_VEC 0x296 +#define PCIE_9XX_MSIX_VECX(n) (n + 0x296) +#define PCIE_9XX_INT_STATUS0 0x397 +#define PCIE_9XX_INT_STATUS1 0x398 +#define PCIE_9XX_INT_EN0 0x399 +#define PCIE_9XX_INT_EN1 0x39a -/* PCIE_INT_EN0 */ -#define PCIE_MSI_INT_EN (1 << 9) +/* other */ +#define PCIE_NLINKS 4 +/* MSI addresses */ +#define MSI_ADDR_BASE 0xfffee00000ULL +#define MSI_ADDR_SZ 0x10000 +#define MSI_LINK_ADDR(n, l) (MSI_ADDR_BASE + \ + (PCIE_NLINKS * (n) + (l)) * MSI_ADDR_SZ) +#define MSIX_ADDR_BASE 0xfffef00000ULL +#define MSIX_LINK_ADDR(n, l) (MSIX_ADDR_BASE + \ + (PCIE_NLINKS * (n) + (l)) * MSI_ADDR_SZ) #ifndef __ASSEMBLY__ #define nlm_read_pcie_reg(b, r) nlm_read_reg(b, r) #define nlm_write_pcie_reg(b, r, v) nlm_write_reg(b, r, v) -#define nlm_get_pcie_base(node, inst) \ - nlm_pcicfg_base(XLP_IO_PCIE_OFFSET(node, inst)) -#define nlm_get_pcie_regbase(node, inst) \ - (nlm_get_pcie_base(node, inst) + XLP_IO_PCI_HDRSZ) +#define nlm_get_pcie_base(node, inst) nlm_pcicfg_base(cpu_is_xlp9xx() ? \ + XLP9XX_IO_PCIE_OFFSET(node, inst) : XLP_IO_PCIE_OFFSET(node, inst)) + +#ifdef CONFIG_PCI_MSI +void xlp_init_node_msi_irqs(int node, int link); +#else +static inline void xlp_init_node_msi_irqs(int node, int link) {} +#endif + +struct pci_dev *xlp_get_pcie_link(const struct pci_dev *dev); -int xlp_pcie_link_irt(int link); #endif #endif /* __NLM_HAL_PCIBUS_H__ */ diff --git a/arch/mips/include/asm/netlogic/xlp-hal/pic.h b/arch/mips/include/asm/netlogic/xlp-hal/pic.h index 3df53017fe5..41cefe94f0c 100644 --- a/arch/mips/include/asm/netlogic/xlp-hal/pic.h +++ b/arch/mips/include/asm/netlogic/xlp-hal/pic.h @@ -150,12 +150,19 @@ #define PIC_IRT0 0x74 #define PIC_IRT(i) (PIC_IRT0 + ((i) * 2)) -#define TIMER_CYCLES_MAXVAL 0xffffffffffffffffULL +#define PIC_9XX_PENDING_0 0x6 +#define PIC_9XX_PENDING_1 0x8 +#define PIC_9XX_PENDING_2 0xa +#define PIC_9XX_PENDING_3 0xc + +#define PIC_9XX_IRT0 0x1c0 +#define PIC_9XX_IRT(i) (PIC_9XX_IRT0 + ((i) * 2)) /* * IRT Map */ #define PIC_NUM_IRTS 160 +#define PIC_9XX_NUM_IRTS 256 #define PIC_IRT_WD_0_INDEX 0 #define PIC_IRT_WD_1_INDEX 1 @@ -191,69 +198,15 @@ #define PIC_IRT_PCIE_LINK_2_INDEX 80 #define PIC_IRT_PCIE_LINK_3_INDEX 81 #define PIC_IRT_PCIE_LINK_INDEX(num) ((num) + PIC_IRT_PCIE_LINK_0_INDEX) -/* 78 to 81 */ -#define PIC_NUM_NA_IRTS 32 -/* 82 to 113 */ -#define PIC_IRT_NA_0_INDEX 82 -#define PIC_IRT_NA_INDEX(num) ((num) + PIC_IRT_NA_0_INDEX) -#define PIC_IRT_POE_INDEX 114 - -#define PIC_NUM_USB_IRTS 6 -#define PIC_IRT_USB_0_INDEX 115 -#define PIC_IRT_EHCI_0_INDEX 115 -#define PIC_IRT_OHCI_0_INDEX 116 -#define PIC_IRT_OHCI_1_INDEX 117 -#define PIC_IRT_EHCI_1_INDEX 118 -#define PIC_IRT_OHCI_2_INDEX 119 -#define PIC_IRT_OHCI_3_INDEX 120 -#define PIC_IRT_USB_INDEX(num) ((num) + PIC_IRT_USB_0_INDEX) -/* 115 to 120 */ -#define PIC_IRT_GDX_INDEX 121 -#define PIC_IRT_SEC_INDEX 122 -#define PIC_IRT_RSA_INDEX 123 - -#define PIC_NUM_COMP_IRTS 4 -#define PIC_IRT_COMP_0_INDEX 124 -#define PIC_IRT_COMP_INDEX(num) ((num) + PIC_IRT_COMP_0_INDEX) -/* 124 to 127 */ -#define PIC_IRT_GBU_INDEX 128 -#define PIC_IRT_ICC_0_INDEX 129 /* ICC - Inter Chip Coherency */ -#define PIC_IRT_ICC_1_INDEX 130 -#define PIC_IRT_ICC_2_INDEX 131 -#define PIC_IRT_CAM_INDEX 132 -#define PIC_IRT_UART_0_INDEX 133 -#define PIC_IRT_UART_1_INDEX 134 -#define PIC_IRT_I2C_0_INDEX 135 -#define PIC_IRT_I2C_1_INDEX 136 -#define PIC_IRT_SYS_0_INDEX 137 -#define PIC_IRT_SYS_1_INDEX 138 -#define PIC_IRT_JTAG_INDEX 139 -#define PIC_IRT_PIC_INDEX 140 -#define PIC_IRT_NBU_INDEX 141 -#define PIC_IRT_TCU_INDEX 142 -#define PIC_IRT_GCU_INDEX 143 /* GBC - Global Coherency */ -#define PIC_IRT_DMC_0_INDEX 144 -#define PIC_IRT_DMC_1_INDEX 145 - -#define PIC_NUM_GPIO_IRTS 4 -#define PIC_IRT_GPIO_0_INDEX 146 -#define PIC_IRT_GPIO_INDEX(num) ((num) + PIC_IRT_GPIO_0_INDEX) - -/* 146 to 149 */ -#define PIC_IRT_NOR_INDEX 150 -#define PIC_IRT_NAND_INDEX 151 -#define PIC_IRT_SPI_INDEX 152 -#define PIC_IRT_MMC_INDEX 153 + +#define PIC_9XX_IRT_PCIE_LINK_0_INDEX 191 +#define PIC_9XX_IRT_PCIE_LINK_INDEX(num) \ + ((num) + PIC_9XX_IRT_PCIE_LINK_0_INDEX) #define PIC_CLOCK_TIMER 7 -#define PIC_IRQ_BASE 8 #if !defined(LOCORE) && !defined(__ASSEMBLY__) -#define PIC_IRT_FIRST_IRQ (PIC_IRQ_BASE) -#define PIC_IRT_LAST_IRQ 63 -#define PIC_IRQ_IS_IRT(irq) ((irq) >= PIC_IRT_FIRST_IRQ) - /* * Misc */ @@ -261,31 +214,28 @@ #define PIC_LOCAL_SCHEDULING 1 #define PIC_GLOBAL_SCHEDULING 0 -#define PIC_CLK_HZ 133333333 - #define nlm_read_pic_reg(b, r) nlm_read_reg64(b, r) #define nlm_write_pic_reg(b, r, v) nlm_write_reg64(b, r, v) -#define nlm_get_pic_pcibase(node) nlm_pcicfg_base(XLP_IO_PIC_OFFSET(node)) +#define nlm_get_pic_pcibase(node) nlm_pcicfg_base(cpu_is_xlp9xx() ? \ + XLP9XX_IO_PIC_OFFSET(node) : XLP_IO_PIC_OFFSET(node)) #define nlm_get_pic_regbase(node) (nlm_get_pic_pcibase(node) + XLP_IO_PCI_HDRSZ) -/* IRT and h/w interrupt routines */ -static inline int -nlm_pic_read_irt(uint64_t base, int irt_index) -{ - return nlm_read_pic_reg(base, PIC_IRT(irt_index)); -} +/* We use PIC on node 0 as a timer */ +#define pic_timer_freq() nlm_get_pic_frequency(0) +/* IRT and h/w interrupt routines */ static inline void -nlm_set_irt_to_cpu(uint64_t base, int irt, int cpu) +nlm_9xx_pic_write_irt(uint64_t base, int irt_num, int en, int nmi, + int sch, int vec, int dt, int db, int cpu) { uint64_t val; - val = nlm_read_pic_reg(base, PIC_IRT(irt)); - /* clear cpuset and mask */ - val &= ~((0x7ull << 16) | 0xffff); - /* set DB, cpuset and cpumask */ - val |= (1 << 19) | ((cpu >> 4) << 16) | (1 << (cpu & 0xf)); - nlm_write_pic_reg(base, PIC_IRT(irt), val); + val = (((uint64_t)en & 0x1) << 22) | ((nmi & 0x1) << 23) | + ((0 /*mc*/) << 20) | ((vec & 0x3f) << 24) | + ((dt & 0x1) << 21) | (0 /*ptr*/ << 16) | + (cpu & 0x3ff); + + nlm_write_pic_reg(base, PIC_9XX_IRT(irt_num), val); } static inline void @@ -306,9 +256,13 @@ static inline void nlm_pic_write_irt_direct(uint64_t base, int irt_num, int en, int nmi, int sch, int vec, int cpu) { - nlm_pic_write_irt(base, irt_num, en, nmi, sch, vec, 1, - (cpu >> 4), /* thread group */ - 1 << (cpu & 0xf)); /* thread mask */ + if (cpu_is_xlp9xx()) + nlm_9xx_pic_write_irt(base, irt_num, en, nmi, sch, vec, + 1, 0, cpu); + else + nlm_pic_write_irt(base, irt_num, en, nmi, sch, vec, 1, + (cpu >> 4), /* thread group */ + 1 << (cpu & 0xf)); /* thread mask */ } static inline uint64_t @@ -350,8 +304,13 @@ nlm_pic_enable_irt(uint64_t base, int irt) { uint64_t reg; - reg = nlm_read_pic_reg(base, PIC_IRT(irt)); - nlm_write_pic_reg(base, PIC_IRT(irt), reg | (1u << 31)); + if (cpu_is_xlp9xx()) { + reg = nlm_read_pic_reg(base, PIC_9XX_IRT(irt)); + nlm_write_pic_reg(base, PIC_9XX_IRT(irt), reg | (1 << 22)); + } else { + reg = nlm_read_pic_reg(base, PIC_IRT(irt)); + nlm_write_pic_reg(base, PIC_IRT(irt), reg | (1u << 31)); + } } static inline void @@ -359,8 +318,15 @@ nlm_pic_disable_irt(uint64_t base, int irt) { uint64_t reg; - reg = nlm_read_pic_reg(base, PIC_IRT(irt)); - nlm_write_pic_reg(base, PIC_IRT(irt), reg & ~((uint64_t)1 << 31)); + if (cpu_is_xlp9xx()) { + reg = nlm_read_pic_reg(base, PIC_9XX_IRT(irt)); + reg &= ~((uint64_t)1 << 22); + nlm_write_pic_reg(base, PIC_9XX_IRT(irt), reg); + } else { + reg = nlm_read_pic_reg(base, PIC_IRT(irt)); + reg &= ~((uint64_t)1 << 31); + nlm_write_pic_reg(base, PIC_IRT(irt), reg); + } } static inline void @@ -368,8 +334,13 @@ nlm_pic_send_ipi(uint64_t base, int hwt, int irq, int nmi) { uint64_t ipi; - ipi = (nmi << 31) | (irq << 20); - ipi |= ((hwt >> 4) << 16) | (1 << (hwt & 0xf)); /* cpuset and mask */ + if (cpu_is_xlp9xx()) + ipi = (nmi << 23) | (irq << 24) | + (0/*mcm*/ << 20) | (0/*ptr*/ << 16) | hwt; + else + ipi = ((uint64_t)nmi << 31) | (irq << 20) | + ((hwt >> 4) << 16) | (1 << (hwt & 0xf)); + nlm_write_pic_reg(base, PIC_IPI_CTL, ipi); } diff --git a/arch/mips/include/asm/netlogic/xlp-hal/sys.h b/arch/mips/include/asm/netlogic/xlp-hal/sys.h index 470e52bfc06..bc7bddf25be 100644 --- a/arch/mips/include/asm/netlogic/xlp-hal/sys.h +++ b/arch/mips/include/asm/netlogic/xlp-hal/sys.h @@ -117,12 +117,94 @@ #define SYS_SCRTCH2 0x4b #define SYS_SCRTCH3 0x4c +/* PLL registers XLP2XX */ +#define SYS_CPU_PLL_CTRL0(core) (0x1c0 + (core * 4)) +#define SYS_CPU_PLL_CTRL1(core) (0x1c1 + (core * 4)) +#define SYS_CPU_PLL_CTRL2(core) (0x1c2 + (core * 4)) +#define SYS_CPU_PLL_CTRL3(core) (0x1c3 + (core * 4)) +#define SYS_PLL_CTRL0 0x240 +#define SYS_PLL_CTRL1 0x241 +#define SYS_PLL_CTRL2 0x242 +#define SYS_PLL_CTRL3 0x243 +#define SYS_DMC_PLL_CTRL0 0x244 +#define SYS_DMC_PLL_CTRL1 0x245 +#define SYS_DMC_PLL_CTRL2 0x246 +#define SYS_DMC_PLL_CTRL3 0x247 + +#define SYS_PLL_CTRL0_DEVX(x) (0x248 + (x) * 4) +#define SYS_PLL_CTRL1_DEVX(x) (0x249 + (x) * 4) +#define SYS_PLL_CTRL2_DEVX(x) (0x24a + (x) * 4) +#define SYS_PLL_CTRL3_DEVX(x) (0x24b + (x) * 4) + +#define SYS_CPU_PLL_CHG_CTRL 0x288 +#define SYS_PLL_CHG_CTRL 0x289 +#define SYS_CLK_DEV_DIS 0x28a +#define SYS_CLK_DEV_SEL 0x28b +#define SYS_CLK_DEV_DIV 0x28c +#define SYS_CLK_DEV_CHG 0x28d +#define SYS_CLK_DEV_SEL_REG 0x28e +#define SYS_CLK_DEV_DIV_REG 0x28f +#define SYS_CPU_PLL_LOCK 0x29f +#define SYS_SYS_PLL_LOCK 0x2a0 +#define SYS_PLL_MEM_CMD 0x2a1 +#define SYS_CPU_PLL_MEM_REQ 0x2a2 +#define SYS_SYS_PLL_MEM_REQ 0x2a3 +#define SYS_PLL_MEM_STAT 0x2a4 + +/* PLL registers XLP9XX */ +#define SYS_9XX_CPU_PLL_CTRL0(core) (0xc0 + (core * 4)) +#define SYS_9XX_CPU_PLL_CTRL1(core) (0xc1 + (core * 4)) +#define SYS_9XX_CPU_PLL_CTRL2(core) (0xc2 + (core * 4)) +#define SYS_9XX_CPU_PLL_CTRL3(core) (0xc3 + (core * 4)) +#define SYS_9XX_DMC_PLL_CTRL0 0x140 +#define SYS_9XX_DMC_PLL_CTRL1 0x141 +#define SYS_9XX_DMC_PLL_CTRL2 0x142 +#define SYS_9XX_DMC_PLL_CTRL3 0x143 +#define SYS_9XX_PLL_CTRL0 0x144 +#define SYS_9XX_PLL_CTRL1 0x145 +#define SYS_9XX_PLL_CTRL2 0x146 +#define SYS_9XX_PLL_CTRL3 0x147 + +#define SYS_9XX_PLL_CTRL0_DEVX(x) (0x148 + (x) * 4) +#define SYS_9XX_PLL_CTRL1_DEVX(x) (0x149 + (x) * 4) +#define SYS_9XX_PLL_CTRL2_DEVX(x) (0x14a + (x) * 4) +#define SYS_9XX_PLL_CTRL3_DEVX(x) (0x14b + (x) * 4) + +#define SYS_9XX_CPU_PLL_CHG_CTRL 0x188 +#define SYS_9XX_PLL_CHG_CTRL 0x189 +#define SYS_9XX_CLK_DEV_DIS 0x18a +#define SYS_9XX_CLK_DEV_SEL 0x18b +#define SYS_9XX_CLK_DEV_DIV 0x18d +#define SYS_9XX_CLK_DEV_CHG 0x18f + +/* Registers changed on 9XX */ +#define SYS_9XX_POWER_ON_RESET_CFG 0x00 +#define SYS_9XX_CHIP_RESET 0x01 +#define SYS_9XX_CPU_RESET 0x02 +#define SYS_9XX_CPU_NONCOHERENT_MODE 0x03 + +/* XLP 9XX fuse block registers */ +#define FUSE_9XX_DEVCFG6 0xc6 + #ifndef __ASSEMBLY__ #define nlm_read_sys_reg(b, r) nlm_read_reg(b, r) #define nlm_write_sys_reg(b, r, v) nlm_write_reg(b, r, v) -#define nlm_get_sys_pcibase(node) nlm_pcicfg_base(XLP_IO_SYS_OFFSET(node)) +#define nlm_get_sys_pcibase(node) nlm_pcicfg_base(cpu_is_xlp9xx() ? \ + XLP9XX_IO_SYS_OFFSET(node) : XLP_IO_SYS_OFFSET(node)) #define nlm_get_sys_regbase(node) (nlm_get_sys_pcibase(node) + XLP_IO_PCI_HDRSZ) +/* XLP9XX fuse block */ +#define nlm_get_fuse_pcibase(node) \ + nlm_pcicfg_base(XLP9XX_IO_FUSE_OFFSET(node)) +#define nlm_get_fuse_regbase(node) \ + (nlm_get_fuse_pcibase(node) + XLP_IO_PCI_HDRSZ) + +#define nlm_get_clock_pcibase(node) \ + nlm_pcicfg_base(XLP9XX_IO_CLOCK_OFFSET(node)) +#define nlm_get_clock_regbase(node) \ + (nlm_get_clock_pcibase(node) + XLP_IO_PCI_HDRSZ) + +unsigned int nlm_get_pic_frequency(int node); #endif #endif diff --git a/arch/mips/include/asm/netlogic/xlp-hal/uart.h b/arch/mips/include/asm/netlogic/xlp-hal/uart.h index 86d16e1e607..a6c54424dd9 100644 --- a/arch/mips/include/asm/netlogic/xlp-hal/uart.h +++ b/arch/mips/include/asm/netlogic/xlp-hal/uart.h @@ -94,7 +94,8 @@ #define nlm_read_uart_reg(b, r) nlm_read_reg(b, r) #define nlm_write_uart_reg(b, r, v) nlm_write_reg(b, r, v) #define nlm_get_uart_pcibase(node, inst) \ - nlm_pcicfg_base(XLP_IO_UART_OFFSET(node, inst)) + nlm_pcicfg_base(cpu_is_xlp9xx() ? XLP9XX_IO_UART_OFFSET(node) : \ + XLP_IO_UART_OFFSET(node, inst)) #define nlm_get_uart_regbase(node, inst) \ (nlm_get_uart_pcibase(node, inst) + XLP_IO_PCI_HDRSZ) diff --git a/arch/mips/include/asm/netlogic/xlp-hal/usb.h b/arch/mips/include/asm/netlogic/xlp-hal/usb.h deleted file mode 100644 index a9cd350dfb6..00000000000 --- a/arch/mips/include/asm/netlogic/xlp-hal/usb.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * Copyright (c) 2003-2012 Broadcom Corporation - * All Rights Reserved - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the Broadcom - * license below: - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * - * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR - * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE - * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN - * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef __NLM_HAL_USB_H__ -#define __NLM_HAL_USB_H__ - -#define USB_CTL_0 0x01 -#define USB_PHY_0 0x0A -#define USB_PHY_RESET 0x01 -#define USB_PHY_PORT_RESET_0 0x10 -#define USB_PHY_PORT_RESET_1 0x20 -#define USB_CONTROLLER_RESET 0x01 -#define USB_INT_STATUS 0x0E -#define USB_INT_EN 0x0F -#define USB_PHY_INTERRUPT_EN 0x01 -#define USB_OHCI_INTERRUPT_EN 0x02 -#define USB_OHCI_INTERRUPT1_EN 0x04 -#define USB_OHCI_INTERRUPT2_EN 0x08 -#define USB_CTRL_INTERRUPT_EN 0x10 - -#ifndef __ASSEMBLY__ - -#define nlm_read_usb_reg(b, r) nlm_read_reg(b, r) -#define nlm_write_usb_reg(b, r, v) nlm_write_reg(b, r, v) -#define nlm_get_usb_pcibase(node, inst) \ - nlm_pcicfg_base(XLP_IO_USB_OFFSET(node, inst)) -#define nlm_get_usb_hcd_base(node, inst) \ - nlm_xkphys_map_pcibar0(nlm_get_usb_pcibase(node, inst)) -#define nlm_get_usb_regbase(node, inst) \ - (nlm_get_usb_pcibase(node, inst) + XLP_IO_PCI_HDRSZ) - -#endif -#endif /* __NLM_HAL_USB_H__ */ diff --git a/arch/mips/include/asm/netlogic/xlp-hal/xlp.h b/arch/mips/include/asm/netlogic/xlp-hal/xlp.h index 7e47209327a..a862b93223c 100644 --- a/arch/mips/include/asm/netlogic/xlp-hal/xlp.h +++ b/arch/mips/include/asm/netlogic/xlp-hal/xlp.h @@ -37,19 +37,49 @@ #define PIC_UART_0_IRQ 17 #define PIC_UART_1_IRQ 18 -#define PIC_PCIE_LINK_0_IRQ 19 -#define PIC_PCIE_LINK_1_IRQ 20 -#define PIC_PCIE_LINK_2_IRQ 21 -#define PIC_PCIE_LINK_3_IRQ 22 + +#define PIC_PCIE_LINK_LEGACY_IRQ_BASE 19 +#define PIC_PCIE_LINK_LEGACY_IRQ(i) (19 + (i)) + #define PIC_EHCI_0_IRQ 23 #define PIC_EHCI_1_IRQ 24 #define PIC_OHCI_0_IRQ 25 #define PIC_OHCI_1_IRQ 26 #define PIC_OHCI_2_IRQ 27 #define PIC_OHCI_3_IRQ 28 +#define PIC_2XX_XHCI_0_IRQ 23 +#define PIC_2XX_XHCI_1_IRQ 24 +#define PIC_2XX_XHCI_2_IRQ 25 +#define PIC_9XX_XHCI_0_IRQ 23 +#define PIC_9XX_XHCI_1_IRQ 24 + #define PIC_MMC_IRQ 29 #define PIC_I2C_0_IRQ 30 #define PIC_I2C_1_IRQ 31 +#define PIC_I2C_2_IRQ 32 +#define PIC_I2C_3_IRQ 33 +#define PIC_SPI_IRQ 34 +#define PIC_NAND_IRQ 37 +#define PIC_SATA_IRQ 38 +#define PIC_GPIO_IRQ 39 + +#define PIC_PCIE_LINK_MSI_IRQ_BASE 44 /* 44 - 47 MSI IRQ */ +#define PIC_PCIE_LINK_MSI_IRQ(i) (44 + (i)) + +/* MSI-X with second link-level dispatch */ +#define PIC_PCIE_MSIX_IRQ_BASE 48 /* 48 - 51 MSI-X IRQ */ +#define PIC_PCIE_MSIX_IRQ(i) (48 + (i)) + +/* XLP9xx and XLP8xx has 128 and 32 MSIX vectors respectively */ +#define NLM_MSIX_VEC_BASE 96 /* 96 - 223 - MSIX mapped */ +#define NLM_MSI_VEC_BASE 224 /* 224 -351 - MSI mapped */ + +#define NLM_PIC_INDIRECT_VEC_BASE 512 +#define NLM_GPIO_VEC_BASE 768 + +#define PIC_IRQ_BASE 8 +#define PIC_IRT_FIRST_IRQ PIC_IRQ_BASE +#define PIC_IRT_LAST_IRQ 63 #ifndef __ASSEMBLY__ @@ -59,6 +89,30 @@ void xlp_wakeup_secondary_cpus(void); void xlp_mmu_init(void); void nlm_hal_init(void); +int xlp_get_dram_map(int n, uint64_t *dram_map); + +struct pci_dev; +int xlp_socdev_to_node(const struct pci_dev *dev); + +/* Device tree related */ +void xlp_early_init_devtree(void); +void *xlp_dt_init(void *fdtp); + +static inline int cpu_is_xlpii(void) +{ + int chip = read_c0_prid() & PRID_IMP_MASK; + + return chip == PRID_IMP_NETLOGIC_XLP2XX || + chip == PRID_IMP_NETLOGIC_XLP9XX || + chip == PRID_IMP_NETLOGIC_XLP5XX; +} + +static inline int cpu_is_xlp9xx(void) +{ + int chip = read_c0_prid() & PRID_IMP_MASK; + return chip == PRID_IMP_NETLOGIC_XLP9XX || + chip == PRID_IMP_NETLOGIC_XLP5XX; +} #endif /* !__ASSEMBLY__ */ #endif /* _ASM_NLM_XLP_H */ diff --git a/arch/mips/include/asm/netlogic/xlr/fmn.h b/arch/mips/include/asm/netlogic/xlr/fmn.h index 2a78929cef7..5604db3d183 100644 --- a/arch/mips/include/asm/netlogic/xlr/fmn.h +++ b/arch/mips/include/asm/netlogic/xlr/fmn.h @@ -175,6 +175,10 @@ #define nlm_write_c2_cc14(s, v) __write_32bit_c2_register($30, s, v) #define nlm_write_c2_cc15(s, v) __write_32bit_c2_register($31, s, v) +#define nlm_read_c2_status0() __read_32bit_c2_register($2, 0) +#define nlm_write_c2_status0(v) __write_32bit_c2_register($2, 0, v) +#define nlm_read_c2_status1() __read_32bit_c2_register($2, 1) +#define nlm_write_c2_status1(v) __write_32bit_c2_register($2, 1, v) #define nlm_read_c2_status(sel) __read_32bit_c2_register($2, 0) #define nlm_read_c2_config() __read_32bit_c2_register($3, 0) #define nlm_write_c2_config(v) __write_32bit_c2_register($3, 0, v) @@ -237,7 +241,7 @@ static inline void nlm_msgwait(unsigned int mask) /* * Disable interrupts and enable COP2 access */ -static inline uint32_t nlm_cop2_enable(void) +static inline uint32_t nlm_cop2_enable_irqsave(void) { uint32_t sr = read_c0_status(); @@ -245,7 +249,7 @@ static inline uint32_t nlm_cop2_enable(void) return sr; } -static inline void nlm_cop2_restore(uint32_t sr) +static inline void nlm_cop2_disable_irqrestore(uint32_t sr) { write_c0_status(sr); } @@ -296,7 +300,7 @@ static inline int nlm_fmn_send(unsigned int size, unsigned int code, */ for (i = 0; i < 8; i++) { nlm_msgsnd(dest); - status = nlm_read_c2_status(0); + status = nlm_read_c2_status0(); if ((status & 0x2) == 1) pr_info("Send pending fail!\n"); if ((status & 0x4) == 0) @@ -316,7 +320,7 @@ static inline int nlm_fmn_receive(int bucket, int *size, int *code, int *stid, /* wait for load pending to clear */ do { - status = nlm_read_c2_status(1); + status = nlm_read_c2_status0(); } while ((status & 0x08) != 0); /* receive error bits */ diff --git a/arch/mips/include/asm/netlogic/xlr/pic.h b/arch/mips/include/asm/netlogic/xlr/pic.h index 63c99176dff..3c80a75233b 100644 --- a/arch/mips/include/asm/netlogic/xlr/pic.h +++ b/arch/mips/include/asm/netlogic/xlr/pic.h @@ -36,6 +36,8 @@ #define _ASM_NLM_XLR_PIC_H #define PIC_CLK_HZ 66666666 +#define pic_timer_freq() PIC_CLK_HZ + /* PIC hardware interrupt numbers */ #define PIC_IRT_WD_INDEX 0 #define PIC_IRT_TIMER_0_INDEX 1 diff --git a/arch/mips/include/asm/netlogic/xlr/xlr.h b/arch/mips/include/asm/netlogic/xlr/xlr.h index c1667e0c272..ceb991ca843 100644 --- a/arch/mips/include/asm/netlogic/xlr/xlr.h +++ b/arch/mips/include/asm/netlogic/xlr/xlr.h @@ -35,11 +35,6 @@ #ifndef _ASM_NLM_XLR_H #define _ASM_NLM_XLR_H -/* Platform UART functions */ -struct uart_port; -unsigned int nlm_xlr_uart_in(struct uart_port *, int); -void nlm_xlr_uart_out(struct uart_port *, int, int); - /* SMP helpers */ void xlr_wakeup_secondary_cpus(void); |
