diff options
Diffstat (limited to 'arch/mips/include/asm/mach-au1x00/au1000.h')
| -rw-r--r-- | arch/mips/include/asm/mach-au1x00/au1000.h | 1294 |
1 files changed, 572 insertions, 722 deletions
diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h index a6976619160..b4c3ecb17d4 100644 --- a/arch/mips/include/asm/mach-au1x00/au1000.h +++ b/arch/mips/include/asm/mach-au1x00/au1000.h @@ -43,6 +43,8 @@ #include <linux/io.h> #include <linux/irq.h> +#include <asm/cpu.h> + /* cpu pipeline flush */ void static inline au_sync(void) { @@ -136,10 +138,11 @@ static inline int au1xxx_cpu_needs_config_od(void) #define ALCHEMY_CPU_AU1100 2 #define ALCHEMY_CPU_AU1550 3 #define ALCHEMY_CPU_AU1200 4 +#define ALCHEMY_CPU_AU1300 5 static inline int alchemy_get_cputype(void) { - switch (read_c0_prid() & 0xffff0000) { + switch (read_c0_prid() & (PRID_OPT_MASK | PRID_COMP_MASK)) { case 0x00030000: return ALCHEMY_CPU_AU1000; break; @@ -156,11 +159,54 @@ static inline int alchemy_get_cputype(void) case 0x05030000: return ALCHEMY_CPU_AU1200; break; + case 0x800c0000: + return ALCHEMY_CPU_AU1300; + break; } return ALCHEMY_CPU_UNKNOWN; } +/* return number of uarts on a given cputype */ +static inline int alchemy_get_uarts(int type) +{ + switch (type) { + case ALCHEMY_CPU_AU1000: + case ALCHEMY_CPU_AU1300: + return 4; + case ALCHEMY_CPU_AU1500: + case ALCHEMY_CPU_AU1200: + return 2; + case ALCHEMY_CPU_AU1100: + case ALCHEMY_CPU_AU1550: + return 3; + } + return 0; +} + +/* enable an UART block if it isn't already */ +static inline void alchemy_uart_enable(u32 uart_phys) +{ + void __iomem *addr = (void __iomem *)KSEG1ADDR(uart_phys); + + /* reset, enable clock, deassert reset */ + if ((__raw_readl(addr + 0x100) & 3) != 3) { + __raw_writel(0, addr + 0x100); + wmb(); + __raw_writel(1, addr + 0x100); + wmb(); + } + __raw_writel(3, addr + 0x100); + wmb(); +} + +static inline void alchemy_uart_disable(u32 uart_phys) +{ + void __iomem *addr = (void __iomem *)KSEG1ADDR(uart_phys); + __raw_writel(0, addr + 0x100); /* UART_MOD_CNTRL */ + wmb(); +} + static inline void alchemy_uart_putchar(u32 uart_phys, u8 c) { void __iomem *base = (void __iomem *)KSEG1ADDR(uart_phys); @@ -180,6 +226,20 @@ static inline void alchemy_uart_putchar(u32 uart_phys, u8 c) wmb(); } +/* return number of ethernet MACs on a given cputype */ +static inline int alchemy_get_macs(int type) +{ + switch (type) { + case ALCHEMY_CPU_AU1000: + case ALCHEMY_CPU_AU1500: + case ALCHEMY_CPU_AU1550: + return 2; + case ALCHEMY_CPU_AU1100: + return 1; + } + return 0; +} + /* arch/mips/au1000/common/clocks.c */ extern void set_au1x00_speed(unsigned int new_freq); extern unsigned int get_au1x00_speed(void); @@ -190,16 +250,113 @@ extern unsigned long au1xxx_calc_clock(void); /* PM: arch/mips/alchemy/common/sleeper.S, power.c, irq.c */ void alchemy_sleep_au1000(void); void alchemy_sleep_au1550(void); +void alchemy_sleep_au1300(void); void au_sleep(void); +/* USB: drivers/usb/host/alchemy-common.c */ +enum alchemy_usb_block { + ALCHEMY_USB_OHCI0, + ALCHEMY_USB_UDC0, + ALCHEMY_USB_EHCI0, + ALCHEMY_USB_OTG0, + ALCHEMY_USB_OHCI1, +}; +int alchemy_usb_control(int block, int enable); + +/* PCI controller platform data */ +struct alchemy_pci_platdata { + int (*board_map_irq)(const struct pci_dev *d, u8 slot, u8 pin); + int (*board_pci_idsel)(unsigned int devsel, int assert); + /* bits to set/clear in PCI_CONFIG register */ + unsigned long pci_cfg_set; + unsigned long pci_cfg_clr; +}; + +/* Multifunction pins: Each of these pins can either be assigned to the + * GPIO controller or a on-chip peripheral. + * Call "au1300_pinfunc_to_dev()" or "au1300_pinfunc_to_gpio()" to + * assign one of these to either the GPIO controller or the device. + */ +enum au1300_multifunc_pins { + /* wake-from-str pins 0-3 */ + AU1300_PIN_WAKE0 = 0, AU1300_PIN_WAKE1, AU1300_PIN_WAKE2, + AU1300_PIN_WAKE3, + /* external clock sources for PSCs: 4-5 */ + AU1300_PIN_EXTCLK0, AU1300_PIN_EXTCLK1, + /* 8bit MMC interface on SD0: 6-9 */ + AU1300_PIN_SD0DAT4, AU1300_PIN_SD0DAT5, AU1300_PIN_SD0DAT6, + AU1300_PIN_SD0DAT7, + /* aux clk input for freqgen 3: 10 */ + AU1300_PIN_FG3AUX, + /* UART1 pins: 11-18 */ + AU1300_PIN_U1RI, AU1300_PIN_U1DCD, AU1300_PIN_U1DSR, + AU1300_PIN_U1CTS, AU1300_PIN_U1RTS, AU1300_PIN_U1DTR, + AU1300_PIN_U1RX, AU1300_PIN_U1TX, + /* UART0 pins: 19-24 */ + AU1300_PIN_U0RI, AU1300_PIN_U0DCD, AU1300_PIN_U0DSR, + AU1300_PIN_U0CTS, AU1300_PIN_U0RTS, AU1300_PIN_U0DTR, + /* UART2: 25-26 */ + AU1300_PIN_U2RX, AU1300_PIN_U2TX, + /* UART3: 27-28 */ + AU1300_PIN_U3RX, AU1300_PIN_U3TX, + /* LCD controller PWMs, ext pixclock: 29-31 */ + AU1300_PIN_LCDPWM0, AU1300_PIN_LCDPWM1, AU1300_PIN_LCDCLKIN, + /* SD1 interface: 32-37 */ + AU1300_PIN_SD1DAT0, AU1300_PIN_SD1DAT1, AU1300_PIN_SD1DAT2, + AU1300_PIN_SD1DAT3, AU1300_PIN_SD1CMD, AU1300_PIN_SD1CLK, + /* SD2 interface: 38-43 */ + AU1300_PIN_SD2DAT0, AU1300_PIN_SD2DAT1, AU1300_PIN_SD2DAT2, + AU1300_PIN_SD2DAT3, AU1300_PIN_SD2CMD, AU1300_PIN_SD2CLK, + /* PSC0/1 clocks: 44-45 */ + AU1300_PIN_PSC0CLK, AU1300_PIN_PSC1CLK, + /* PSCs: 46-49/50-53/54-57/58-61 */ + AU1300_PIN_PSC0SYNC0, AU1300_PIN_PSC0SYNC1, AU1300_PIN_PSC0D0, + AU1300_PIN_PSC0D1, + AU1300_PIN_PSC1SYNC0, AU1300_PIN_PSC1SYNC1, AU1300_PIN_PSC1D0, + AU1300_PIN_PSC1D1, + AU1300_PIN_PSC2SYNC0, AU1300_PIN_PSC2SYNC1, AU1300_PIN_PSC2D0, + AU1300_PIN_PSC2D1, + AU1300_PIN_PSC3SYNC0, AU1300_PIN_PSC3SYNC1, AU1300_PIN_PSC3D0, + AU1300_PIN_PSC3D1, + /* PCMCIA interface: 62-70 */ + AU1300_PIN_PCE2, AU1300_PIN_PCE1, AU1300_PIN_PIOS16, + AU1300_PIN_PIOR, AU1300_PIN_PWE, AU1300_PIN_PWAIT, + AU1300_PIN_PREG, AU1300_PIN_POE, AU1300_PIN_PIOW, + /* camera interface H/V sync inputs: 71-72 */ + AU1300_PIN_CIMLS, AU1300_PIN_CIMFS, + /* PSC2/3 clocks: 73-74 */ + AU1300_PIN_PSC2CLK, AU1300_PIN_PSC3CLK, +}; + +/* GPIC (Au1300) pin management: arch/mips/alchemy/common/gpioint.c */ +extern void au1300_pinfunc_to_gpio(enum au1300_multifunc_pins gpio); +extern void au1300_pinfunc_to_dev(enum au1300_multifunc_pins gpio); +extern void au1300_set_irq_priority(unsigned int irq, int p); +extern void au1300_set_dbdma_gpio(int dchan, unsigned int gpio); + +/* Au1300 allows to disconnect certain blocks from internal power supply */ +enum au1300_vss_block { + AU1300_VSS_MPE = 0, + AU1300_VSS_BSA, + AU1300_VSS_GPE, + AU1300_VSS_MGP, +}; -/* SOC Interrupt numbers */ +extern void au1300_vss_block_control(int block, int enable); + +/* SOC Interrupt numbers */ +/* Au1000-style (IC0/1): 2 controllers with 32 sources each */ #define AU1000_INTC0_INT_BASE (MIPS_CPU_IRQ_BASE + 8) #define AU1000_INTC0_INT_LAST (AU1000_INTC0_INT_BASE + 31) #define AU1000_INTC1_INT_BASE (AU1000_INTC0_INT_LAST + 1) #define AU1000_INTC1_INT_LAST (AU1000_INTC1_INT_BASE + 31) -#define AU1000_MAX_INTR AU1000_INTC1_INT_LAST +#define AU1000_MAX_INTR AU1000_INTC1_INT_LAST + +/* Au1300-style (GPIC): 1 controller with up to 128 sources */ +#define ALCHEMY_GPIC_INT_BASE (MIPS_CPU_IRQ_BASE + 8) +#define ALCHEMY_GPIC_INT_NUM 128 +#define ALCHEMY_GPIC_INT_LAST (ALCHEMY_GPIC_INT_BASE + ALCHEMY_GPIC_INT_NUM - 1) enum soc_au1000_ints { AU1000_FIRST_INT = AU1000_INTC0_INT_BASE, @@ -434,7 +591,7 @@ enum soc_au1550_ints { AU1550_GPIO14_INT, AU1550_GPIO15_INT, AU1550_GPIO200_INT, - AU1550_GPIO201_205_INT, /* Logical or of GPIO201:205 */ + AU1550_GPIO201_205_INT, /* Logical or of GPIO201:205 */ AU1550_GPIO16_INT, AU1550_GPIO17_INT, AU1550_GPIO20_INT, @@ -448,7 +605,7 @@ enum soc_au1550_ints { AU1550_GPIO28_INT, AU1550_GPIO206_INT, AU1550_GPIO207_INT, - AU1550_GPIO208_215_INT, /* Logical or of GPIO208:215 */ + AU1550_GPIO208_215_INT, /* Logical or of GPIO208:215 */ }; enum soc_au1200_ints { @@ -481,7 +638,7 @@ enum soc_au1200_ints { AU1200_GPIO205_INT, AU1200_GPIO206_INT, AU1200_GPIO207_INT, - AU1200_GPIO208_215_INT, /* Logical OR of 208:215 */ + AU1200_GPIO208_215_INT, /* Logical OR of 208:215 */ AU1200_USB_INT, AU1200_LCD_INT, AU1200_MAE_BOTH_INT, @@ -521,39 +678,208 @@ enum soc_au1200_ints { #endif /* !defined (_LANGUAGE_ASSEMBLY) */ +/* Au1300 peripheral interrupt numbers */ +#define AU1300_FIRST_INT (ALCHEMY_GPIC_INT_BASE) +#define AU1300_UART1_INT (AU1300_FIRST_INT + 17) +#define AU1300_UART2_INT (AU1300_FIRST_INT + 25) +#define AU1300_UART3_INT (AU1300_FIRST_INT + 27) +#define AU1300_SD1_INT (AU1300_FIRST_INT + 32) +#define AU1300_SD2_INT (AU1300_FIRST_INT + 38) +#define AU1300_PSC0_INT (AU1300_FIRST_INT + 48) +#define AU1300_PSC1_INT (AU1300_FIRST_INT + 52) +#define AU1300_PSC2_INT (AU1300_FIRST_INT + 56) +#define AU1300_PSC3_INT (AU1300_FIRST_INT + 60) +#define AU1300_NAND_INT (AU1300_FIRST_INT + 62) +#define AU1300_DDMA_INT (AU1300_FIRST_INT + 75) +#define AU1300_MMU_INT (AU1300_FIRST_INT + 76) +#define AU1300_MPU_INT (AU1300_FIRST_INT + 77) +#define AU1300_GPU_INT (AU1300_FIRST_INT + 78) +#define AU1300_UDMA_INT (AU1300_FIRST_INT + 79) +#define AU1300_TOY_INT (AU1300_FIRST_INT + 80) +#define AU1300_TOY_MATCH0_INT (AU1300_FIRST_INT + 81) +#define AU1300_TOY_MATCH1_INT (AU1300_FIRST_INT + 82) +#define AU1300_TOY_MATCH2_INT (AU1300_FIRST_INT + 83) +#define AU1300_RTC_INT (AU1300_FIRST_INT + 84) +#define AU1300_RTC_MATCH0_INT (AU1300_FIRST_INT + 85) +#define AU1300_RTC_MATCH1_INT (AU1300_FIRST_INT + 86) +#define AU1300_RTC_MATCH2_INT (AU1300_FIRST_INT + 87) +#define AU1300_UART0_INT (AU1300_FIRST_INT + 88) +#define AU1300_SD0_INT (AU1300_FIRST_INT + 89) +#define AU1300_USB_INT (AU1300_FIRST_INT + 90) +#define AU1300_LCD_INT (AU1300_FIRST_INT + 91) +#define AU1300_BSA_INT (AU1300_FIRST_INT + 92) +#define AU1300_MPE_INT (AU1300_FIRST_INT + 93) +#define AU1300_ITE_INT (AU1300_FIRST_INT + 94) +#define AU1300_AES_INT (AU1300_FIRST_INT + 95) +#define AU1300_CIM_INT (AU1300_FIRST_INT + 96) + +/**********************************************************************/ + /* - * SDRAM register offsets + * Physical base addresses for integrated peripherals + * 0..au1000 1..au1500 2..au1100 3..au1550 4..au1200 5..au1300 */ -#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || \ - defined(CONFIG_SOC_AU1100) -#define MEM_SDMODE0 0x0000 -#define MEM_SDMODE1 0x0004 -#define MEM_SDMODE2 0x0008 -#define MEM_SDADDR0 0x000C -#define MEM_SDADDR1 0x0010 -#define MEM_SDADDR2 0x0014 -#define MEM_SDREFCFG 0x0018 -#define MEM_SDPRECMD 0x001C -#define MEM_SDAUTOREF 0x0020 -#define MEM_SDWRMD0 0x0024 -#define MEM_SDWRMD1 0x0028 -#define MEM_SDWRMD2 0x002C -#define MEM_SDSLEEP 0x0030 -#define MEM_SDSMCKE 0x0034 + +#define AU1000_AC97_PHYS_ADDR 0x10000000 /* 012 */ +#define AU1300_ROM_PHYS_ADDR 0x10000000 /* 5 */ +#define AU1300_OTP_PHYS_ADDR 0x10002000 /* 5 */ +#define AU1300_VSS_PHYS_ADDR 0x10003000 /* 5 */ +#define AU1300_UART0_PHYS_ADDR 0x10100000 /* 5 */ +#define AU1300_UART1_PHYS_ADDR 0x10101000 /* 5 */ +#define AU1300_UART2_PHYS_ADDR 0x10102000 /* 5 */ +#define AU1300_UART3_PHYS_ADDR 0x10103000 /* 5 */ +#define AU1000_USB_OHCI_PHYS_ADDR 0x10100000 /* 012 */ +#define AU1000_USB_UDC_PHYS_ADDR 0x10200000 /* 0123 */ +#define AU1300_GPIC_PHYS_ADDR 0x10200000 /* 5 */ +#define AU1000_IRDA_PHYS_ADDR 0x10300000 /* 02 */ +#define AU1200_AES_PHYS_ADDR 0x10300000 /* 45 */ +#define AU1000_IC0_PHYS_ADDR 0x10400000 /* 01234 */ +#define AU1300_GPU_PHYS_ADDR 0x10500000 /* 5 */ +#define AU1000_MAC0_PHYS_ADDR 0x10500000 /* 023 */ +#define AU1000_MAC1_PHYS_ADDR 0x10510000 /* 023 */ +#define AU1000_MACEN_PHYS_ADDR 0x10520000 /* 023 */ +#define AU1100_SD0_PHYS_ADDR 0x10600000 /* 245 */ +#define AU1300_SD1_PHYS_ADDR 0x10601000 /* 5 */ +#define AU1300_SD2_PHYS_ADDR 0x10602000 /* 5 */ +#define AU1100_SD1_PHYS_ADDR 0x10680000 /* 24 */ +#define AU1300_SYS_PHYS_ADDR 0x10900000 /* 5 */ +#define AU1550_PSC2_PHYS_ADDR 0x10A00000 /* 3 */ +#define AU1550_PSC3_PHYS_ADDR 0x10B00000 /* 3 */ +#define AU1300_PSC0_PHYS_ADDR 0x10A00000 /* 5 */ +#define AU1300_PSC1_PHYS_ADDR 0x10A01000 /* 5 */ +#define AU1300_PSC2_PHYS_ADDR 0x10A02000 /* 5 */ +#define AU1300_PSC3_PHYS_ADDR 0x10A03000 /* 5 */ +#define AU1000_I2S_PHYS_ADDR 0x11000000 /* 02 */ +#define AU1500_MAC0_PHYS_ADDR 0x11500000 /* 1 */ +#define AU1500_MAC1_PHYS_ADDR 0x11510000 /* 1 */ +#define AU1500_MACEN_PHYS_ADDR 0x11520000 /* 1 */ +#define AU1000_UART0_PHYS_ADDR 0x11100000 /* 01234 */ +#define AU1200_SWCNT_PHYS_ADDR 0x1110010C /* 4 */ +#define AU1000_UART1_PHYS_ADDR 0x11200000 /* 0234 */ +#define AU1000_UART2_PHYS_ADDR 0x11300000 /* 0 */ +#define AU1000_UART3_PHYS_ADDR 0x11400000 /* 0123 */ +#define AU1000_SSI0_PHYS_ADDR 0x11600000 /* 02 */ +#define AU1000_SSI1_PHYS_ADDR 0x11680000 /* 02 */ +#define AU1500_GPIO2_PHYS_ADDR 0x11700000 /* 1234 */ +#define AU1000_IC1_PHYS_ADDR 0x11800000 /* 01234 */ +#define AU1000_SYS_PHYS_ADDR 0x11900000 /* 012345 */ +#define AU1550_PSC0_PHYS_ADDR 0x11A00000 /* 34 */ +#define AU1550_PSC1_PHYS_ADDR 0x11B00000 /* 34 */ +#define AU1000_MEM_PHYS_ADDR 0x14000000 /* 01234 */ +#define AU1000_STATIC_MEM_PHYS_ADDR 0x14001000 /* 01234 */ +#define AU1300_UDMA_PHYS_ADDR 0x14001800 /* 5 */ +#define AU1000_DMA_PHYS_ADDR 0x14002000 /* 012 */ +#define AU1550_DBDMA_PHYS_ADDR 0x14002000 /* 345 */ +#define AU1550_DBDMA_CONF_PHYS_ADDR 0x14003000 /* 345 */ +#define AU1000_MACDMA0_PHYS_ADDR 0x14004000 /* 0123 */ +#define AU1000_MACDMA1_PHYS_ADDR 0x14004200 /* 0123 */ +#define AU1200_CIM_PHYS_ADDR 0x14004000 /* 45 */ +#define AU1500_PCI_PHYS_ADDR 0x14005000 /* 13 */ +#define AU1550_PE_PHYS_ADDR 0x14008000 /* 3 */ +#define AU1200_MAEBE_PHYS_ADDR 0x14010000 /* 4 */ +#define AU1200_MAEFE_PHYS_ADDR 0x14012000 /* 4 */ +#define AU1300_MAEITE_PHYS_ADDR 0x14010000 /* 5 */ +#define AU1300_MAEMPE_PHYS_ADDR 0x14014000 /* 5 */ +#define AU1550_USB_OHCI_PHYS_ADDR 0x14020000 /* 3 */ +#define AU1200_USB_CTL_PHYS_ADDR 0x14020000 /* 4 */ +#define AU1200_USB_OTG_PHYS_ADDR 0x14020020 /* 4 */ +#define AU1200_USB_OHCI_PHYS_ADDR 0x14020100 /* 4 */ +#define AU1200_USB_EHCI_PHYS_ADDR 0x14020200 /* 4 */ +#define AU1200_USB_UDC_PHYS_ADDR 0x14022000 /* 4 */ +#define AU1300_USB_EHCI_PHYS_ADDR 0x14020000 /* 5 */ +#define AU1300_USB_OHCI0_PHYS_ADDR 0x14020400 /* 5 */ +#define AU1300_USB_OHCI1_PHYS_ADDR 0x14020800 /* 5 */ +#define AU1300_USB_CTL_PHYS_ADDR 0x14021000 /* 5 */ +#define AU1300_USB_OTG_PHYS_ADDR 0x14022000 /* 5 */ +#define AU1300_MAEBSA_PHYS_ADDR 0x14030000 /* 5 */ +#define AU1100_LCD_PHYS_ADDR 0x15000000 /* 2 */ +#define AU1200_LCD_PHYS_ADDR 0x15000000 /* 45 */ +#define AU1500_PCI_MEM_PHYS_ADDR 0x400000000ULL /* 13 */ +#define AU1500_PCI_IO_PHYS_ADDR 0x500000000ULL /* 13 */ +#define AU1500_PCI_CONFIG0_PHYS_ADDR 0x600000000ULL /* 13 */ +#define AU1500_PCI_CONFIG1_PHYS_ADDR 0x680000000ULL /* 13 */ +#define AU1000_PCMCIA_IO_PHYS_ADDR 0xF00000000ULL /* 012345 */ +#define AU1000_PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL /* 012345 */ +#define AU1000_PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL /* 012345 */ + +/**********************************************************************/ + /* - * MEM_SDMODE register content definitions + * Au1300 GPIO+INT controller (GPIC) register offsets and bits + * Registers are 128bits (0x10 bytes), divided into 4 "banks". */ +#define AU1300_GPIC_PINVAL 0x0000 +#define AU1300_GPIC_PINVALCLR 0x0010 +#define AU1300_GPIC_IPEND 0x0020 +#define AU1300_GPIC_PRIENC 0x0030 +#define AU1300_GPIC_IEN 0x0040 /* int_mask in manual */ +#define AU1300_GPIC_IDIS 0x0050 /* int_maskclr in manual */ +#define AU1300_GPIC_DMASEL 0x0060 +#define AU1300_GPIC_DEVSEL 0x0080 +#define AU1300_GPIC_DEVCLR 0x0090 +#define AU1300_GPIC_RSTVAL 0x00a0 +/* pin configuration space. one 32bit register for up to 128 IRQs */ +#define AU1300_GPIC_PINCFG 0x1000 + +#define GPIC_GPIO_TO_BIT(gpio) \ + (1 << ((gpio) & 0x1f)) + +#define GPIC_GPIO_BANKOFF(gpio) \ + (((gpio) >> 5) * 4) + +/* Pin Control bits: who owns the pin, what does it do */ +#define GPIC_CFG_PC_GPIN 0 +#define GPIC_CFG_PC_DEV 1 +#define GPIC_CFG_PC_GPOLOW 2 +#define GPIC_CFG_PC_GPOHIGH 3 +#define GPIC_CFG_PC_MASK 3 + +/* assign pin to MIPS IRQ line */ +#define GPIC_CFG_IL_SET(x) (((x) & 3) << 2) +#define GPIC_CFG_IL_MASK (3 << 2) + +/* pin interrupt type setup */ +#define GPIC_CFG_IC_OFF (0 << 4) +#define GPIC_CFG_IC_LEVEL_LOW (1 << 4) +#define GPIC_CFG_IC_LEVEL_HIGH (2 << 4) +#define GPIC_CFG_IC_EDGE_FALL (5 << 4) +#define GPIC_CFG_IC_EDGE_RISE (6 << 4) +#define GPIC_CFG_IC_EDGE_BOTH (7 << 4) +#define GPIC_CFG_IC_MASK (7 << 4) + +/* allow interrupt to wake cpu from 'wait' */ +#define GPIC_CFG_IDLEWAKE (1 << 7) + +/***********************************************************************/ + +/* Au1000 SDRAM memory controller register offsets */ +#define AU1000_MEM_SDMODE0 0x0000 +#define AU1000_MEM_SDMODE1 0x0004 +#define AU1000_MEM_SDMODE2 0x0008 +#define AU1000_MEM_SDADDR0 0x000C +#define AU1000_MEM_SDADDR1 0x0010 +#define AU1000_MEM_SDADDR2 0x0014 +#define AU1000_MEM_SDREFCFG 0x0018 +#define AU1000_MEM_SDPRECMD 0x001C +#define AU1000_MEM_SDAUTOREF 0x0020 +#define AU1000_MEM_SDWRMD0 0x0024 +#define AU1000_MEM_SDWRMD1 0x0028 +#define AU1000_MEM_SDWRMD2 0x002C +#define AU1000_MEM_SDSLEEP 0x0030 +#define AU1000_MEM_SDSMCKE 0x0034 + +/* MEM_SDMODE register content definitions */ #define MEM_SDMODE_F (1 << 22) #define MEM_SDMODE_SR (1 << 21) #define MEM_SDMODE_BS (1 << 20) #define MEM_SDMODE_RS (3 << 18) #define MEM_SDMODE_CS (7 << 15) -#define MEM_SDMODE_TRAS (15 << 11) -#define MEM_SDMODE_TMRD (3 << 9) +#define MEM_SDMODE_TRAS (15 << 11) +#define MEM_SDMODE_TMRD (3 << 9) #define MEM_SDMODE_TWR (3 << 7) #define MEM_SDMODE_TRP (3 << 5) -#define MEM_SDMODE_TRCD (3 << 3) +#define MEM_SDMODE_TRCD (3 << 3) #define MEM_SDMODE_TCL (7 << 0) #define MEM_SDMODE_BS_2Bank (0 << 20) @@ -575,238 +901,43 @@ enum soc_au1200_ints { #define MEM_SDMODE_TRCD_N(N) ((N) << 3) #define MEM_SDMODE_TCL_N(N) ((N) << 0) -/* - * MEM_SDADDR register contents definitions - */ +/* MEM_SDADDR register contents definitions */ #define MEM_SDADDR_E (1 << 20) -#define MEM_SDADDR_CSBA (0x03FF << 10) +#define MEM_SDADDR_CSBA (0x03FF << 10) #define MEM_SDADDR_CSMASK (0x03FF << 0) #define MEM_SDADDR_CSBA_N(N) ((N) & (0x03FF << 22) >> 12) #define MEM_SDADDR_CSMASK_N(N) ((N)&(0x03FF << 22) >> 22) -/* - * MEM_SDREFCFG register content definitions - */ +/* MEM_SDREFCFG register content definitions */ #define MEM_SDREFCFG_TRC (15 << 28) #define MEM_SDREFCFG_TRPM (3 << 26) #define MEM_SDREFCFG_E (1 << 25) -#define MEM_SDREFCFG_RE (0x1ffffff << 0) +#define MEM_SDREFCFG_RE (0x1ffffff << 0) #define MEM_SDREFCFG_TRC_N(N) ((N) << MEM_SDREFCFG_TRC) #define MEM_SDREFCFG_TRPM_N(N) ((N) << MEM_SDREFCFG_TRPM) #define MEM_SDREFCFG_REF_N(N) (N) -#endif -/***********************************************************************/ - -/* - * Au1550 SDRAM Register Offsets - */ - -/***********************************************************************/ - -#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) -#define MEM_SDMODE0 0x0800 -#define MEM_SDMODE1 0x0808 -#define MEM_SDMODE2 0x0810 -#define MEM_SDADDR0 0x0820 -#define MEM_SDADDR1 0x0828 -#define MEM_SDADDR2 0x0830 -#define MEM_SDCONFIGA 0x0840 -#define MEM_SDCONFIGB 0x0848 -#define MEM_SDSTAT 0x0850 -#define MEM_SDERRADDR 0x0858 -#define MEM_SDSTRIDE0 0x0860 -#define MEM_SDSTRIDE1 0x0868 -#define MEM_SDSTRIDE2 0x0870 -#define MEM_SDWRMD0 0x0880 -#define MEM_SDWRMD1 0x0888 -#define MEM_SDWRMD2 0x0890 -#define MEM_SDPRECMD 0x08C0 -#define MEM_SDAUTOREF 0x08C8 -#define MEM_SDSREF 0x08D0 -#define MEM_SDSLEEP MEM_SDSREF - -#endif - -/* - * Physical base addresses for integrated peripherals - */ - -#ifdef CONFIG_SOC_AU1000 -#define MEM_PHYS_ADDR 0x14000000 -#define STATIC_MEM_PHYS_ADDR 0x14001000 -#define DMA0_PHYS_ADDR 0x14002000 -#define DMA1_PHYS_ADDR 0x14002100 -#define DMA2_PHYS_ADDR 0x14002200 -#define DMA3_PHYS_ADDR 0x14002300 -#define DMA4_PHYS_ADDR 0x14002400 -#define DMA5_PHYS_ADDR 0x14002500 -#define DMA6_PHYS_ADDR 0x14002600 -#define DMA7_PHYS_ADDR 0x14002700 -#define IC0_PHYS_ADDR 0x10400000 -#define IC1_PHYS_ADDR 0x11800000 -#define AC97_PHYS_ADDR 0x10000000 -#define USBH_PHYS_ADDR 0x10100000 -#define USBD_PHYS_ADDR 0x10200000 -#define IRDA_PHYS_ADDR 0x10300000 -#define MAC0_PHYS_ADDR 0x10500000 -#define MAC1_PHYS_ADDR 0x10510000 -#define MACEN_PHYS_ADDR 0x10520000 -#define MACDMA0_PHYS_ADDR 0x14004000 -#define MACDMA1_PHYS_ADDR 0x14004200 -#define I2S_PHYS_ADDR 0x11000000 -#define UART0_PHYS_ADDR 0x11100000 -#define UART1_PHYS_ADDR 0x11200000 -#define UART2_PHYS_ADDR 0x11300000 -#define UART3_PHYS_ADDR 0x11400000 -#define SSI0_PHYS_ADDR 0x11600000 -#define SSI1_PHYS_ADDR 0x11680000 -#define SYS_PHYS_ADDR 0x11900000 -#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL -#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL -#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL -#endif - -/********************************************************************/ - -#ifdef CONFIG_SOC_AU1500 -#define MEM_PHYS_ADDR 0x14000000 -#define STATIC_MEM_PHYS_ADDR 0x14001000 -#define DMA0_PHYS_ADDR 0x14002000 -#define DMA1_PHYS_ADDR 0x14002100 -#define DMA2_PHYS_ADDR 0x14002200 -#define DMA3_PHYS_ADDR 0x14002300 -#define DMA4_PHYS_ADDR 0x14002400 -#define DMA5_PHYS_ADDR 0x14002500 -#define DMA6_PHYS_ADDR 0x14002600 -#define DMA7_PHYS_ADDR 0x14002700 -#define IC0_PHYS_ADDR 0x10400000 -#define IC1_PHYS_ADDR 0x11800000 -#define AC97_PHYS_ADDR 0x10000000 -#define USBH_PHYS_ADDR 0x10100000 -#define USBD_PHYS_ADDR 0x10200000 -#define PCI_PHYS_ADDR 0x14005000 -#define MAC0_PHYS_ADDR 0x11500000 -#define MAC1_PHYS_ADDR 0x11510000 -#define MACEN_PHYS_ADDR 0x11520000 -#define MACDMA0_PHYS_ADDR 0x14004000 -#define MACDMA1_PHYS_ADDR 0x14004200 -#define I2S_PHYS_ADDR 0x11000000 -#define UART0_PHYS_ADDR 0x11100000 -#define UART3_PHYS_ADDR 0x11400000 -#define GPIO2_PHYS_ADDR 0x11700000 -#define SYS_PHYS_ADDR 0x11900000 -#define PCI_MEM_PHYS_ADDR 0x400000000ULL -#define PCI_IO_PHYS_ADDR 0x500000000ULL -#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL -#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL -#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL -#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL -#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL -#endif - -/********************************************************************/ - -#ifdef CONFIG_SOC_AU1100 -#define MEM_PHYS_ADDR 0x14000000 -#define STATIC_MEM_PHYS_ADDR 0x14001000 -#define DMA0_PHYS_ADDR 0x14002000 -#define DMA1_PHYS_ADDR 0x14002100 -#define DMA2_PHYS_ADDR 0x14002200 -#define DMA3_PHYS_ADDR 0x14002300 -#define DMA4_PHYS_ADDR 0x14002400 -#define DMA5_PHYS_ADDR 0x14002500 -#define DMA6_PHYS_ADDR 0x14002600 -#define DMA7_PHYS_ADDR 0x14002700 -#define IC0_PHYS_ADDR 0x10400000 -#define SD0_PHYS_ADDR 0x10600000 -#define SD1_PHYS_ADDR 0x10680000 -#define IC1_PHYS_ADDR 0x11800000 -#define AC97_PHYS_ADDR 0x10000000 -#define USBH_PHYS_ADDR 0x10100000 -#define USBD_PHYS_ADDR 0x10200000 -#define IRDA_PHYS_ADDR 0x10300000 -#define MAC0_PHYS_ADDR 0x10500000 -#define MACEN_PHYS_ADDR 0x10520000 -#define MACDMA0_PHYS_ADDR 0x14004000 -#define MACDMA1_PHYS_ADDR 0x14004200 -#define I2S_PHYS_ADDR 0x11000000 -#define UART0_PHYS_ADDR 0x11100000 -#define UART1_PHYS_ADDR 0x11200000 -#define UART3_PHYS_ADDR 0x11400000 -#define SSI0_PHYS_ADDR 0x11600000 -#define SSI1_PHYS_ADDR 0x11680000 -#define GPIO2_PHYS_ADDR 0x11700000 -#define SYS_PHYS_ADDR 0x11900000 -#define LCD_PHYS_ADDR 0x15000000 -#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL -#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL -#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL -#endif - -/***********************************************************************/ - -#ifdef CONFIG_SOC_AU1550 -#define MEM_PHYS_ADDR 0x14000000 -#define STATIC_MEM_PHYS_ADDR 0x14001000 -#define IC0_PHYS_ADDR 0x10400000 -#define IC1_PHYS_ADDR 0x11800000 -#define USBH_PHYS_ADDR 0x14020000 -#define USBD_PHYS_ADDR 0x10200000 -#define PCI_PHYS_ADDR 0x14005000 -#define MAC0_PHYS_ADDR 0x10500000 -#define MAC1_PHYS_ADDR 0x10510000 -#define MACEN_PHYS_ADDR 0x10520000 -#define MACDMA0_PHYS_ADDR 0x14004000 -#define MACDMA1_PHYS_ADDR 0x14004200 -#define UART0_PHYS_ADDR 0x11100000 -#define UART1_PHYS_ADDR 0x11200000 -#define UART3_PHYS_ADDR 0x11400000 -#define GPIO2_PHYS_ADDR 0x11700000 -#define SYS_PHYS_ADDR 0x11900000 -#define DDMA_PHYS_ADDR 0x14002000 -#define PE_PHYS_ADDR 0x14008000 -#define PSC0_PHYS_ADDR 0x11A00000 -#define PSC1_PHYS_ADDR 0x11B00000 -#define PSC2_PHYS_ADDR 0x10A00000 -#define PSC3_PHYS_ADDR 0x10B00000 -#define PCI_MEM_PHYS_ADDR 0x400000000ULL -#define PCI_IO_PHYS_ADDR 0x500000000ULL -#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL -#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL -#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL -#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL -#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL -#endif - -/***********************************************************************/ - -#ifdef CONFIG_SOC_AU1200 -#define MEM_PHYS_ADDR 0x14000000 -#define STATIC_MEM_PHYS_ADDR 0x14001000 -#define AES_PHYS_ADDR 0x10300000 -#define CIM_PHYS_ADDR 0x14004000 -#define IC0_PHYS_ADDR 0x10400000 -#define IC1_PHYS_ADDR 0x11800000 -#define USBM_PHYS_ADDR 0x14020000 -#define USBH_PHYS_ADDR 0x14020100 -#define UART0_PHYS_ADDR 0x11100000 -#define UART1_PHYS_ADDR 0x11200000 -#define GPIO2_PHYS_ADDR 0x11700000 -#define SYS_PHYS_ADDR 0x11900000 -#define DDMA_PHYS_ADDR 0x14002000 -#define PSC0_PHYS_ADDR 0x11A00000 -#define PSC1_PHYS_ADDR 0x11B00000 -#define SD0_PHYS_ADDR 0x10600000 -#define SD1_PHYS_ADDR 0x10680000 -#define LCD_PHYS_ADDR 0x15000000 -#define SWCNT_PHYS_ADDR 0x1110010C -#define MAEFE_PHYS_ADDR 0x14012000 -#define MAEBE_PHYS_ADDR 0x14010000 -#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL -#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL -#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL -#endif +/* Au1550 SDRAM Register Offsets */ +#define AU1550_MEM_SDMODE0 0x0800 +#define AU1550_MEM_SDMODE1 0x0808 +#define AU1550_MEM_SDMODE2 0x0810 +#define AU1550_MEM_SDADDR0 0x0820 +#define AU1550_MEM_SDADDR1 0x0828 +#define AU1550_MEM_SDADDR2 0x0830 +#define AU1550_MEM_SDCONFIGA 0x0840 +#define AU1550_MEM_SDCONFIGB 0x0848 +#define AU1550_MEM_SDSTAT 0x0850 +#define AU1550_MEM_SDERRADDR 0x0858 +#define AU1550_MEM_SDSTRIDE0 0x0860 +#define AU1550_MEM_SDSTRIDE1 0x0868 +#define AU1550_MEM_SDSTRIDE2 0x0870 +#define AU1550_MEM_SDWRMD0 0x0880 +#define AU1550_MEM_SDWRMD1 0x0888 +#define AU1550_MEM_SDWRMD2 0x0890 +#define AU1550_MEM_SDPRECMD 0x08C0 +#define AU1550_MEM_SDAUTOREF 0x08C8 +#define AU1550_MEM_SDSREF 0x08D0 +#define AU1550_MEM_SDSLEEP MEM_SDSREF /* Static Bus Controller */ #define MEM_STCFG0 0xB4001000 @@ -825,243 +956,36 @@ enum soc_au1200_ints { #define MEM_STTIME3 0xB4001034 #define MEM_STADDR3 0xB4001038 -#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) #define MEM_STNDCTL 0xB4001100 #define MEM_STSTAT 0xB4001104 #define MEM_STNAND_CMD 0x0 -#define MEM_STNAND_ADDR 0x4 -#define MEM_STNAND_DATA 0x20 -#endif - +#define MEM_STNAND_ADDR 0x4 +#define MEM_STNAND_DATA 0x20 -/* Interrupt Controller register offsets */ -#define IC_CFG0RD 0x40 -#define IC_CFG0SET 0x40 -#define IC_CFG0CLR 0x44 -#define IC_CFG1RD 0x48 -#define IC_CFG1SET 0x48 -#define IC_CFG1CLR 0x4C -#define IC_CFG2RD 0x50 -#define IC_CFG2SET 0x50 -#define IC_CFG2CLR 0x54 -#define IC_REQ0INT 0x54 -#define IC_SRCRD 0x58 -#define IC_SRCSET 0x58 -#define IC_SRCCLR 0x5C -#define IC_REQ1INT 0x5C -#define IC_ASSIGNRD 0x60 -#define IC_ASSIGNSET 0x60 -#define IC_ASSIGNCLR 0x64 -#define IC_WAKERD 0x68 -#define IC_WAKESET 0x68 -#define IC_WAKECLR 0x6C -#define IC_MASKRD 0x70 -#define IC_MASKSET 0x70 -#define IC_MASKCLR 0x74 -#define IC_RISINGRD 0x78 -#define IC_RISINGCLR 0x78 -#define IC_FALLINGRD 0x7C -#define IC_FALLINGCLR 0x7C -#define IC_TESTBIT 0x80 - - -/* Interrupt Controller 0 */ -#define IC0_CFG0RD 0xB0400040 -#define IC0_CFG0SET 0xB0400040 -#define IC0_CFG0CLR 0xB0400044 - -#define IC0_CFG1RD 0xB0400048 -#define IC0_CFG1SET 0xB0400048 -#define IC0_CFG1CLR 0xB040004C - -#define IC0_CFG2RD 0xB0400050 -#define IC0_CFG2SET 0xB0400050 -#define IC0_CFG2CLR 0xB0400054 - -#define IC0_REQ0INT 0xB0400054 -#define IC0_SRCRD 0xB0400058 -#define IC0_SRCSET 0xB0400058 -#define IC0_SRCCLR 0xB040005C -#define IC0_REQ1INT 0xB040005C - -#define IC0_ASSIGNRD 0xB0400060 -#define IC0_ASSIGNSET 0xB0400060 -#define IC0_ASSIGNCLR 0xB0400064 - -#define IC0_WAKERD 0xB0400068 -#define IC0_WAKESET 0xB0400068 -#define IC0_WAKECLR 0xB040006C - -#define IC0_MASKRD 0xB0400070 -#define IC0_MASKSET 0xB0400070 -#define IC0_MASKCLR 0xB0400074 - -#define IC0_RISINGRD 0xB0400078 -#define IC0_RISINGCLR 0xB0400078 -#define IC0_FALLINGRD 0xB040007C -#define IC0_FALLINGCLR 0xB040007C - -#define IC0_TESTBIT 0xB0400080 - -/* Interrupt Controller 1 */ -#define IC1_CFG0RD 0xB1800040 -#define IC1_CFG0SET 0xB1800040 -#define IC1_CFG0CLR 0xB1800044 - -#define IC1_CFG1RD 0xB1800048 -#define IC1_CFG1SET 0xB1800048 -#define IC1_CFG1CLR 0xB180004C - -#define IC1_CFG2RD 0xB1800050 -#define IC1_CFG2SET 0xB1800050 -#define IC1_CFG2CLR 0xB1800054 - -#define IC1_REQ0INT 0xB1800054 -#define IC1_SRCRD 0xB1800058 -#define IC1_SRCSET 0xB1800058 -#define IC1_SRCCLR 0xB180005C -#define IC1_REQ1INT 0xB180005C - -#define IC1_ASSIGNRD 0xB1800060 -#define IC1_ASSIGNSET 0xB1800060 -#define IC1_ASSIGNCLR 0xB1800064 - -#define IC1_WAKERD 0xB1800068 -#define IC1_WAKESET 0xB1800068 -#define IC1_WAKECLR 0xB180006C - -#define IC1_MASKRD 0xB1800070 -#define IC1_MASKSET 0xB1800070 -#define IC1_MASKCLR 0xB1800074 - -#define IC1_RISINGRD 0xB1800078 -#define IC1_RISINGCLR 0xB1800078 -#define IC1_FALLINGRD 0xB180007C -#define IC1_FALLINGCLR 0xB180007C - -#define IC1_TESTBIT 0xB1800080 - - -/* Au1000 */ -#ifdef CONFIG_SOC_AU1000 - -#define UART0_ADDR 0xB1100000 -#define UART3_ADDR 0xB1400000 - -#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */ -#define USB_HOST_CONFIG 0xB017FFFC -#define FOR_PLATFORM_C_USB_HOST_INT AU1000_USB_HOST_INT - -#define AU1000_ETH0_BASE 0xB0500000 -#define AU1000_ETH1_BASE 0xB0510000 -#define AU1000_MAC0_ENABLE 0xB0520000 -#define AU1000_MAC1_ENABLE 0xB0520004 -#define NUM_ETH_INTERFACES 2 -#endif /* CONFIG_SOC_AU1000 */ - -/* Au1500 */ -#ifdef CONFIG_SOC_AU1500 - -#define UART0_ADDR 0xB1100000 -#define UART3_ADDR 0xB1400000 - -#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */ -#define USB_HOST_CONFIG 0xB017fffc -#define FOR_PLATFORM_C_USB_HOST_INT AU1500_USB_HOST_INT - -#define AU1500_ETH0_BASE 0xB1500000 -#define AU1500_ETH1_BASE 0xB1510000 -#define AU1500_MAC0_ENABLE 0xB1520000 -#define AU1500_MAC1_ENABLE 0xB1520004 -#define NUM_ETH_INTERFACES 2 -#endif /* CONFIG_SOC_AU1500 */ - -/* Au1100 */ -#ifdef CONFIG_SOC_AU1100 - -#define UART0_ADDR 0xB1100000 -#define UART3_ADDR 0xB1400000 - -#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */ -#define USB_HOST_CONFIG 0xB017FFFC -#define FOR_PLATFORM_C_USB_HOST_INT AU1100_USB_HOST_INT - -#define AU1100_ETH0_BASE 0xB0500000 -#define AU1100_MAC0_ENABLE 0xB0520000 -#define NUM_ETH_INTERFACES 1 -#endif /* CONFIG_SOC_AU1100 */ - -#ifdef CONFIG_SOC_AU1550 -#define UART0_ADDR 0xB1100000 - -#define USB_OHCI_BASE 0x14020000 /* phys addr for ioremap */ -#define USB_OHCI_LEN 0x00060000 -#define USB_HOST_CONFIG 0xB4027ffc -#define FOR_PLATFORM_C_USB_HOST_INT AU1550_USB_HOST_INT - -#define AU1550_ETH0_BASE 0xB0500000 -#define AU1550_ETH1_BASE 0xB0510000 -#define AU1550_MAC0_ENABLE 0xB0520000 -#define AU1550_MAC1_ENABLE 0xB0520004 -#define NUM_ETH_INTERFACES 2 -#endif /* CONFIG_SOC_AU1550 */ - - -#ifdef CONFIG_SOC_AU1200 - -#define UART0_ADDR 0xB1100000 - -#define USB_UOC_BASE 0x14020020 -#define USB_UOC_LEN 0x20 -#define USB_OHCI_BASE 0x14020100 -#define USB_OHCI_LEN 0x100 -#define USB_EHCI_BASE 0x14020200 -#define USB_EHCI_LEN 0x100 -#define USB_UDC_BASE 0x14022000 -#define USB_UDC_LEN 0x2000 -#define USB_MSR_BASE 0xB4020000 -#define USB_MSR_MCFG 4 -#define USBMSRMCFG_OMEMEN 0 -#define USBMSRMCFG_OBMEN 1 -#define USBMSRMCFG_EMEMEN 2 -#define USBMSRMCFG_EBMEN 3 -#define USBMSRMCFG_DMEMEN 4 -#define USBMSRMCFG_DBMEN 5 -#define USBMSRMCFG_GMEMEN 6 -#define USBMSRMCFG_OHCCLKEN 16 -#define USBMSRMCFG_EHCCLKEN 17 -#define USBMSRMCFG_UDCCLKEN 18 -#define USBMSRMCFG_PHYPLLEN 19 -#define USBMSRMCFG_RDCOMB 30 -#define USBMSRMCFG_PFEN 31 - -#define FOR_PLATFORM_C_USB_HOST_INT AU1200_USB_INT - -#endif /* CONFIG_SOC_AU1200 */ /* Programmable Counters 0 and 1 */ #define SYS_BASE 0xB1900000 #define SYS_COUNTER_CNTRL (SYS_BASE + 0x14) -# define SYS_CNTRL_E1S (1 << 23) -# define SYS_CNTRL_T1S (1 << 20) -# define SYS_CNTRL_M21 (1 << 19) -# define SYS_CNTRL_M11 (1 << 18) -# define SYS_CNTRL_M01 (1 << 17) -# define SYS_CNTRL_C1S (1 << 16) +# define SYS_CNTRL_E1S (1 << 23) +# define SYS_CNTRL_T1S (1 << 20) +# define SYS_CNTRL_M21 (1 << 19) +# define SYS_CNTRL_M11 (1 << 18) +# define SYS_CNTRL_M01 (1 << 17) +# define SYS_CNTRL_C1S (1 << 16) # define SYS_CNTRL_BP (1 << 14) -# define SYS_CNTRL_EN1 (1 << 13) -# define SYS_CNTRL_BT1 (1 << 12) -# define SYS_CNTRL_EN0 (1 << 11) -# define SYS_CNTRL_BT0 (1 << 10) +# define SYS_CNTRL_EN1 (1 << 13) +# define SYS_CNTRL_BT1 (1 << 12) +# define SYS_CNTRL_EN0 (1 << 11) +# define SYS_CNTRL_BT0 (1 << 10) # define SYS_CNTRL_E0 (1 << 8) -# define SYS_CNTRL_E0S (1 << 7) -# define SYS_CNTRL_32S (1 << 5) -# define SYS_CNTRL_T0S (1 << 4) -# define SYS_CNTRL_M20 (1 << 3) -# define SYS_CNTRL_M10 (1 << 2) -# define SYS_CNTRL_M00 (1 << 1) -# define SYS_CNTRL_C0S (1 << 0) +# define SYS_CNTRL_E0S (1 << 7) +# define SYS_CNTRL_32S (1 << 5) +# define SYS_CNTRL_T0S (1 << 4) +# define SYS_CNTRL_M20 (1 << 3) +# define SYS_CNTRL_M10 (1 << 2) +# define SYS_CNTRL_M00 (1 << 1) +# define SYS_CNTRL_C0S (1 << 0) /* Programmable Counter 0 Registers */ #define SYS_TOYTRIM (SYS_BASE + 0) @@ -1081,100 +1005,50 @@ enum soc_au1200_ints { /* I2S Controller */ #define I2S_DATA 0xB1000000 -# define I2S_DATA_MASK 0xffffff +# define I2S_DATA_MASK 0xffffff #define I2S_CONFIG 0xB1000004 -# define I2S_CONFIG_XU (1 << 25) -# define I2S_CONFIG_XO (1 << 24) -# define I2S_CONFIG_RU (1 << 23) -# define I2S_CONFIG_RO (1 << 22) -# define I2S_CONFIG_TR (1 << 21) -# define I2S_CONFIG_TE (1 << 20) -# define I2S_CONFIG_TF (1 << 19) -# define I2S_CONFIG_RR (1 << 18) -# define I2S_CONFIG_RE (1 << 17) -# define I2S_CONFIG_RF (1 << 16) -# define I2S_CONFIG_PD (1 << 11) -# define I2S_CONFIG_LB (1 << 10) -# define I2S_CONFIG_IC (1 << 9) +# define I2S_CONFIG_XU (1 << 25) +# define I2S_CONFIG_XO (1 << 24) +# define I2S_CONFIG_RU (1 << 23) +# define I2S_CONFIG_RO (1 << 22) +# define I2S_CONFIG_TR (1 << 21) +# define I2S_CONFIG_TE (1 << 20) +# define I2S_CONFIG_TF (1 << 19) +# define I2S_CONFIG_RR (1 << 18) +# define I2S_CONFIG_RE (1 << 17) +# define I2S_CONFIG_RF (1 << 16) +# define I2S_CONFIG_PD (1 << 11) +# define I2S_CONFIG_LB (1 << 10) +# define I2S_CONFIG_IC (1 << 9) # define I2S_CONFIG_FM_BIT 7 # define I2S_CONFIG_FM_MASK (0x3 << I2S_CONFIG_FM_BIT) # define I2S_CONFIG_FM_I2S (0x0 << I2S_CONFIG_FM_BIT) # define I2S_CONFIG_FM_LJ (0x1 << I2S_CONFIG_FM_BIT) # define I2S_CONFIG_FM_RJ (0x2 << I2S_CONFIG_FM_BIT) -# define I2S_CONFIG_TN (1 << 6) -# define I2S_CONFIG_RN (1 << 5) +# define I2S_CONFIG_TN (1 << 6) +# define I2S_CONFIG_RN (1 << 5) # define I2S_CONFIG_SZ_BIT 0 # define I2S_CONFIG_SZ_MASK (0x1F << I2S_CONFIG_SZ_BIT) #define I2S_CONTROL 0xB1000008 -# define I2S_CONTROL_D (1 << 1) +# define I2S_CONTROL_D (1 << 1) # define I2S_CONTROL_CE (1 << 0) -/* USB Host Controller */ -#ifndef USB_OHCI_LEN -#define USB_OHCI_LEN 0x00100000 -#endif - -#ifndef CONFIG_SOC_AU1200 - -/* USB Device Controller */ -#define USBD_EP0RD 0xB0200000 -#define USBD_EP0WR 0xB0200004 -#define USBD_EP2WR 0xB0200008 -#define USBD_EP3WR 0xB020000C -#define USBD_EP4RD 0xB0200010 -#define USBD_EP5RD 0xB0200014 -#define USBD_INTEN 0xB0200018 -#define USBD_INTSTAT 0xB020001C -# define USBDEV_INT_SOF (1 << 12) -# define USBDEV_INT_HF_BIT 6 -# define USBDEV_INT_HF_MASK (0x3f << USBDEV_INT_HF_BIT) -# define USBDEV_INT_CMPLT_BIT 0 -# define USBDEV_INT_CMPLT_MASK (0x3f << USBDEV_INT_CMPLT_BIT) -#define USBD_CONFIG 0xB0200020 -#define USBD_EP0CS 0xB0200024 -#define USBD_EP2CS 0xB0200028 -#define USBD_EP3CS 0xB020002C -#define USBD_EP4CS 0xB0200030 -#define USBD_EP5CS 0xB0200034 -# define USBDEV_CS_SU (1 << 14) -# define USBDEV_CS_NAK (1 << 13) -# define USBDEV_CS_ACK (1 << 12) -# define USBDEV_CS_BUSY (1 << 11) -# define USBDEV_CS_TSIZE_BIT 1 -# define USBDEV_CS_TSIZE_MASK (0x3ff << USBDEV_CS_TSIZE_BIT) -# define USBDEV_CS_STALL (1 << 0) -#define USBD_EP0RDSTAT 0xB0200040 -#define USBD_EP0WRSTAT 0xB0200044 -#define USBD_EP2WRSTAT 0xB0200048 -#define USBD_EP3WRSTAT 0xB020004C -#define USBD_EP4RDSTAT 0xB0200050 -#define USBD_EP5RDSTAT 0xB0200054 -# define USBDEV_FSTAT_FLUSH (1 << 6) -# define USBDEV_FSTAT_UF (1 << 5) -# define USBDEV_FSTAT_OF (1 << 4) -# define USBDEV_FSTAT_FCNT_BIT 0 -# define USBDEV_FSTAT_FCNT_MASK (0x0f << USBDEV_FSTAT_FCNT_BIT) -#define USBD_ENABLE 0xB0200058 -# define USBDEV_ENABLE (1 << 1) -# define USBDEV_CE (1 << 0) - -#endif /* !CONFIG_SOC_AU1200 */ /* Ethernet Controllers */ /* 4 byte offsets from AU1000_ETH_BASE */ #define MAC_CONTROL 0x0 -# define MAC_RX_ENABLE (1 << 2) -# define MAC_TX_ENABLE (1 << 3) -# define MAC_DEF_CHECK (1 << 5) -# define MAC_SET_BL(X) (((X) & 0x3) << 6) +# define MAC_RX_ENABLE (1 << 2) +# define MAC_TX_ENABLE (1 << 3) +# define MAC_DEF_CHECK (1 << 5) +# define MAC_SET_BL(X) (((X) & 0x3) << 6) # define MAC_AUTO_PAD (1 << 8) # define MAC_DISABLE_RETRY (1 << 10) # define MAC_DISABLE_BCAST (1 << 11) # define MAC_LATE_COL (1 << 12) -# define MAC_HASH_MODE (1 << 13) -# define MAC_HASH_ONLY (1 << 15) +# define MAC_HASH_MODE (1 << 13) +# define MAC_HASH_ONLY (1 << 15) # define MAC_PASS_ALL (1 << 16) # define MAC_INVERSE_FILTER (1 << 17) # define MAC_PROMISCUOUS (1 << 18) @@ -1211,9 +1085,9 @@ enum soc_au1200_ints { # define MAC_EN_RESET0 (1 << 1) # define MAC_EN_TOSS (0 << 2) # define MAC_EN_CACHEABLE (1 << 3) -# define MAC_EN_RESET1 (1 << 4) -# define MAC_EN_RESET2 (1 << 5) -# define MAC_DMA_RESET (1 << 6) +# define MAC_EN_RESET1 (1 << 4) +# define MAC_EN_RESET2 (1 << 5) +# define MAC_DMA_RESET (1 << 6) /* Ethernet Controller DMA Channels */ @@ -1223,7 +1097,7 @@ enum soc_au1200_ints { #define MAC_TX_BUFF0_STATUS 0x0 # define TX_FRAME_ABORTED (1 << 0) # define TX_JAB_TIMEOUT (1 << 1) -# define TX_NO_CARRIER (1 << 2) +# define TX_NO_CARRIER (1 << 2) # define TX_LOSS_CARRIER (1 << 3) # define TX_EXC_DEF (1 << 4) # define TX_LATE_COLL_ABORT (1 << 5) @@ -1234,7 +1108,7 @@ enum soc_au1200_ints { # define TX_COLL_CNT_MASK (0xF << 10) # define TX_PKT_RETRY (1 << 31) #define MAC_TX_BUFF0_ADDR 0x4 -# define TX_DMA_ENABLE (1 << 0) +# define TX_DMA_ENABLE (1 << 0) # define TX_T_DONE (1 << 1) # define TX_GET_DMA_BUFFER(X) (((X) >> 2) & 0x3) #define MAC_TX_BUFF0_LEN 0x8 @@ -1253,7 +1127,7 @@ enum soc_au1200_ints { /* offsets from MAC_RX_RING_ADDR */ #define MAC_RX_BUFF0_STATUS 0x0 # define RX_FRAME_LEN_MASK 0x3fff -# define RX_WDOG_TIMER (1 << 14) +# define RX_WDOG_TIMER (1 << 14) # define RX_RUNT (1 << 15) # define RX_OVERLEN (1 << 16) # define RX_COLL (1 << 17) @@ -1276,7 +1150,7 @@ enum soc_au1200_ints { RX_COLL | RX_MII_ERROR | RX_CRC_ERROR | \ RX_LEN_ERROR | RX_U_CNTRL_FRAME | RX_MISSED_FRAME) #define MAC_RX_BUFF0_ADDR 0x4 -# define RX_DMA_ENABLE (1 << 0) +# define RX_DMA_ENABLE (1 << 0) # define RX_T_DONE (1 << 1) # define RX_GET_DMA_BUFFER(X) (((X) >> 2) & 0x3) # define RX_SET_BUFF_ADDR(X) ((X) & 0xffffffc0) @@ -1287,48 +1161,36 @@ enum soc_au1200_ints { #define MAC_RX_BUFF3_STATUS 0x30 #define MAC_RX_BUFF3_ADDR 0x34 -#define UART_RX 0 /* Receive buffer */ -#define UART_TX 4 /* Transmit buffer */ -#define UART_IER 8 /* Interrupt Enable Register */ -#define UART_IIR 0xC /* Interrupt ID Register */ -#define UART_FCR 0x10 /* FIFO Control Register */ -#define UART_LCR 0x14 /* Line Control Register */ -#define UART_MCR 0x18 /* Modem Control Register */ -#define UART_LSR 0x1C /* Line Status Register */ -#define UART_MSR 0x20 /* Modem Status Register */ -#define UART_CLK 0x28 /* Baud Rate Clock Divider */ -#define UART_MOD_CNTRL 0x100 /* Module Control */ - /* SSIO */ #define SSI0_STATUS 0xB1600000 -# define SSI_STATUS_BF (1 << 4) -# define SSI_STATUS_OF (1 << 3) -# define SSI_STATUS_UF (1 << 2) +# define SSI_STATUS_BF (1 << 4) +# define SSI_STATUS_OF (1 << 3) +# define SSI_STATUS_UF (1 << 2) # define SSI_STATUS_D (1 << 1) # define SSI_STATUS_B (1 << 0) #define SSI0_INT 0xB1600004 # define SSI_INT_OI (1 << 3) # define SSI_INT_UI (1 << 2) # define SSI_INT_DI (1 << 1) -#define SSI0_INT_ENABLE 0xB1600008 +#define SSI0_INT_ENABLE 0xB1600008 # define SSI_INTE_OIE (1 << 3) # define SSI_INTE_UIE (1 << 2) # define SSI_INTE_DIE (1 << 1) #define SSI0_CONFIG 0xB1600020 -# define SSI_CONFIG_AO (1 << 24) -# define SSI_CONFIG_DO (1 << 23) +# define SSI_CONFIG_AO (1 << 24) +# define SSI_CONFIG_DO (1 << 23) # define SSI_CONFIG_ALEN_BIT 20 # define SSI_CONFIG_ALEN_MASK (0x7 << 20) # define SSI_CONFIG_DLEN_BIT 16 # define SSI_CONFIG_DLEN_MASK (0x7 << 16) -# define SSI_CONFIG_DD (1 << 11) -# define SSI_CONFIG_AD (1 << 10) +# define SSI_CONFIG_DD (1 << 11) +# define SSI_CONFIG_AD (1 << 10) # define SSI_CONFIG_BM_BIT 8 # define SSI_CONFIG_BM_MASK (0x3 << 8) -# define SSI_CONFIG_CE (1 << 7) -# define SSI_CONFIG_DP (1 << 6) -# define SSI_CONFIG_DL (1 << 5) -# define SSI_CONFIG_EP (1 << 4) +# define SSI_CONFIG_CE (1 << 7) +# define SSI_CONFIG_DP (1 << 6) +# define SSI_CONFIG_DL (1 << 5) +# define SSI_CONFIG_EP (1 << 4) #define SSI0_ADATA 0xB1600024 # define SSI_AD_D (1 << 24) # define SSI_AD_ADDR_BIT 16 @@ -1338,12 +1200,12 @@ enum soc_au1200_ints { #define SSI0_CLKDIV 0xB1600028 #define SSI0_CONTROL 0xB1600100 # define SSI_CONTROL_CD (1 << 1) -# define SSI_CONTROL_E (1 << 0) +# define SSI_CONTROL_E (1 << 0) /* SSI1 */ #define SSI1_STATUS 0xB1680000 #define SSI1_INT 0xB1680004 -#define SSI1_INT_ENABLE 0xB1680008 +#define SSI1_INT_ENABLE 0xB1680008 #define SSI1_CONFIG 0xB1680020 #define SSI1_ADATA 0xB1680024 #define SSI1_CLKDIV 0xB1680028 @@ -1370,8 +1232,8 @@ enum soc_au1200_ints { #define SSI_CONFIG_AO (1 << 24) #define SSI_CONFIG_DO (1 << 23) -#define SSI_CONFIG_ALEN (7 << 20) -#define SSI_CONFIG_DLEN (15 << 16) +#define SSI_CONFIG_ALEN (7 << 20) +#define SSI_CONFIG_DLEN (15 << 16) #define SSI_CONFIG_DD (1 << 11) #define SSI_CONFIG_AD (1 << 10) #define SSI_CONFIG_BM (3 << 8) @@ -1393,44 +1255,20 @@ enum soc_au1200_ints { #define SSI_ENABLE_CD (1 << 1) #define SSI_ENABLE_E (1 << 0) -/* IrDA Controller */ -#define IRDA_BASE 0xB0300000 -#define IR_RING_PTR_STATUS (IRDA_BASE + 0x00) -#define IR_RING_BASE_ADDR_H (IRDA_BASE + 0x04) -#define IR_RING_BASE_ADDR_L (IRDA_BASE + 0x08) -#define IR_RING_SIZE (IRDA_BASE + 0x0C) -#define IR_RING_PROMPT (IRDA_BASE + 0x10) -#define IR_RING_ADDR_CMPR (IRDA_BASE + 0x14) -#define IR_INT_CLEAR (IRDA_BASE + 0x18) -#define IR_CONFIG_1 (IRDA_BASE + 0x20) -# define IR_RX_INVERT_LED (1 << 0) -# define IR_TX_INVERT_LED (1 << 1) -# define IR_ST (1 << 2) -# define IR_SF (1 << 3) -# define IR_SIR (1 << 4) -# define IR_MIR (1 << 5) -# define IR_FIR (1 << 6) -# define IR_16CRC (1 << 7) -# define IR_TD (1 << 8) -# define IR_RX_ALL (1 << 9) -# define IR_DMA_ENABLE (1 << 10) -# define IR_RX_ENABLE (1 << 11) -# define IR_TX_ENABLE (1 << 12) -# define IR_LOOPBACK (1 << 14) -# define IR_SIR_MODE (IR_SIR | IR_DMA_ENABLE | \ - IR_RX_ALL | IR_RX_ENABLE | IR_SF | IR_16CRC) -#define IR_SIR_FLAGS (IRDA_BASE + 0x24) -#define IR_ENABLE (IRDA_BASE + 0x28) -# define IR_RX_STATUS (1 << 9) -# define IR_TX_STATUS (1 << 10) -#define IR_READ_PHY_CONFIG (IRDA_BASE + 0x2C) -#define IR_WRITE_PHY_CONFIG (IRDA_BASE + 0x30) -#define IR_MAX_PKT_LEN (IRDA_BASE + 0x34) -#define IR_RX_BYTE_CNT (IRDA_BASE + 0x38) -#define IR_CONFIG_2 (IRDA_BASE + 0x3C) -# define IR_MODE_INV (1 << 0) -# define IR_ONE_PIN (1 << 1) -#define IR_INTERFACE_CONFIG (IRDA_BASE + 0x40) + +/* + * The IrDA peripheral has an IRFIRSEL pin, but on the DB/PB boards it's not + * used to select FIR/SIR mode on the transceiver but as a GPIO. Instead a + * CPLD has to be told about the mode. + */ +#define AU1000_IRDA_PHY_MODE_OFF 0 +#define AU1000_IRDA_PHY_MODE_SIR 1 +#define AU1000_IRDA_PHY_MODE_FIR 2 + +struct au1k_irda_platform_data { + void(*set_phy_mode)(int mode); +}; + /* GPIO */ #define SYS_PINFUNC 0xB190002C @@ -1457,7 +1295,7 @@ enum soc_au1200_ints { # define SYS_PF_CS (1 << 16) /* EXTCLK0/32KHz to gpio2 */ # define SYS_PF_EX0 (1 << 9) /* GPIO2/clock */ -/* Au1550 only. Redefines lots of pins */ +/* Au1550 only. Redefines lots of pins */ # define SYS_PF_PSC2_MASK (7 << 17) # define SYS_PF_PSC2_AC97 0 # define SYS_PF_PSC2_SPI 0 @@ -1474,51 +1312,33 @@ enum soc_au1200_ints { # define SYS_PF_MUST_BE_SET ((1 << 5) | (1 << 2)) /* Au1200 only */ -#ifdef CONFIG_SOC_AU1200 -#define SYS_PINFUNC_DMA (1 << 31) -#define SYS_PINFUNC_S0A (1 << 30) -#define SYS_PINFUNC_S1A (1 << 29) -#define SYS_PINFUNC_LP0 (1 << 28) -#define SYS_PINFUNC_LP1 (1 << 27) -#define SYS_PINFUNC_LD16 (1 << 26) -#define SYS_PINFUNC_LD8 (1 << 25) -#define SYS_PINFUNC_LD1 (1 << 24) -#define SYS_PINFUNC_LD0 (1 << 23) -#define SYS_PINFUNC_P1A (3 << 21) -#define SYS_PINFUNC_P1B (1 << 20) -#define SYS_PINFUNC_FS3 (1 << 19) -#define SYS_PINFUNC_P0A (3 << 17) +#define SYS_PINFUNC_DMA (1 << 31) +#define SYS_PINFUNC_S0A (1 << 30) +#define SYS_PINFUNC_S1A (1 << 29) +#define SYS_PINFUNC_LP0 (1 << 28) +#define SYS_PINFUNC_LP1 (1 << 27) +#define SYS_PINFUNC_LD16 (1 << 26) +#define SYS_PINFUNC_LD8 (1 << 25) +#define SYS_PINFUNC_LD1 (1 << 24) +#define SYS_PINFUNC_LD0 (1 << 23) +#define SYS_PINFUNC_P1A (3 << 21) +#define SYS_PINFUNC_P1B (1 << 20) +#define SYS_PINFUNC_FS3 (1 << 19) +#define SYS_PINFUNC_P0A (3 << 17) #define SYS_PINFUNC_CS (1 << 16) -#define SYS_PINFUNC_CIM (1 << 15) -#define SYS_PINFUNC_P1C (1 << 14) -#define SYS_PINFUNC_U1T (1 << 12) -#define SYS_PINFUNC_U1R (1 << 11) -#define SYS_PINFUNC_EX1 (1 << 10) -#define SYS_PINFUNC_EX0 (1 << 9) -#define SYS_PINFUNC_U0R (1 << 8) +#define SYS_PINFUNC_CIM (1 << 15) +#define SYS_PINFUNC_P1C (1 << 14) +#define SYS_PINFUNC_U1T (1 << 12) +#define SYS_PINFUNC_U1R (1 << 11) +#define SYS_PINFUNC_EX1 (1 << 10) +#define SYS_PINFUNC_EX0 (1 << 9) +#define SYS_PINFUNC_U0R (1 << 8) #define SYS_PINFUNC_MC (1 << 7) -#define SYS_PINFUNC_S0B (1 << 6) -#define SYS_PINFUNC_S0C (1 << 5) -#define SYS_PINFUNC_P0B (1 << 4) -#define SYS_PINFUNC_U0T (1 << 3) -#define SYS_PINFUNC_S1B (1 << 2) -#endif - -#define SYS_TRIOUTRD 0xB1900100 -#define SYS_TRIOUTCLR 0xB1900100 -#define SYS_OUTPUTRD 0xB1900108 -#define SYS_OUTPUTSET 0xB1900108 -#define SYS_OUTPUTCLR 0xB190010C -#define SYS_PINSTATERD 0xB1900110 -#define SYS_PININPUTEN 0xB1900110 - -/* GPIO2, Au1500, Au1550 only */ -#define GPIO2_BASE 0xB1700000 -#define GPIO2_DIR (GPIO2_BASE + 0) -#define GPIO2_OUTPUT (GPIO2_BASE + 8) -#define GPIO2_PINSTATE (GPIO2_BASE + 0xC) -#define GPIO2_INTENABLE (GPIO2_BASE + 0x10) -#define GPIO2_ENABLE (GPIO2_BASE + 0x14) +#define SYS_PINFUNC_S0B (1 << 6) +#define SYS_PINFUNC_S0C (1 << 5) +#define SYS_PINFUNC_P0B (1 << 4) +#define SYS_PINFUNC_U0T (1 << 3) +#define SYS_PINFUNC_S1B (1 << 2) /* Power Management */ #define SYS_SCRATCH0 0xB1900018 @@ -1574,12 +1394,12 @@ enum soc_au1200_ints { # define SYS_CS_MI2_MASK (0x7 << SYS_CS_MI2_BIT) # define SYS_CS_DI2 (1 << 16) # define SYS_CS_CI2 (1 << 15) -#ifdef CONFIG_SOC_AU1100 -# define SYS_CS_ML_BIT 7 + +# define SYS_CS_ML_BIT 7 # define SYS_CS_ML_MASK (0x7 << SYS_CS_ML_BIT) # define SYS_CS_DL (1 << 6) # define SYS_CS_CL (1 << 5) -#else + # define SYS_CS_MUH_BIT 12 # define SYS_CS_MUH_MASK (0x7 << SYS_CS_MUH_BIT) # define SYS_CS_DUH (1 << 11) @@ -1588,7 +1408,7 @@ enum soc_au1200_ints { # define SYS_CS_MUD_MASK (0x7 << SYS_CS_MUD_BIT) # define SYS_CS_DUD (1 << 6) # define SYS_CS_CUD (1 << 5) -#endif + # define SYS_CS_MIR_BIT 2 # define SYS_CS_MIR_MASK (0x7 << SYS_CS_MIR_BIT) # define SYS_CS_DIR (1 << 1) @@ -1635,64 +1455,30 @@ enum soc_au1200_ints { # define AC97C_RS (1 << 1) # define AC97C_CE (1 << 0) -/* Secure Digital (SD) Controller */ -#define SD0_XMIT_FIFO 0xB0600000 -#define SD0_RECV_FIFO 0xB0600004 -#define SD1_XMIT_FIFO 0xB0680000 -#define SD1_RECV_FIFO 0xB0680004 - -#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550) -/* Au1500 PCI Controller */ -#define Au1500_CFG_BASE 0xB4005000 /* virtual, KSEG1 addr */ -#define Au1500_PCI_CMEM (Au1500_CFG_BASE + 0) -#define Au1500_PCI_CFG (Au1500_CFG_BASE + 4) -# define PCI_ERROR ((1 << 22) | (1 << 23) | (1 << 24) | \ - (1 << 25) | (1 << 26) | (1 << 27)) -#define Au1500_PCI_B2BMASK_CCH (Au1500_CFG_BASE + 8) -#define Au1500_PCI_B2B0_VID (Au1500_CFG_BASE + 0xC) -#define Au1500_PCI_B2B1_ID (Au1500_CFG_BASE + 0x10) -#define Au1500_PCI_MWMASK_DEV (Au1500_CFG_BASE + 0x14) -#define Au1500_PCI_MWBASE_REV_CCL (Au1500_CFG_BASE + 0x18) -#define Au1500_PCI_ERR_ADDR (Au1500_CFG_BASE + 0x1C) -#define Au1500_PCI_SPEC_INTACK (Au1500_CFG_BASE + 0x20) -#define Au1500_PCI_ID (Au1500_CFG_BASE + 0x100) -#define Au1500_PCI_STATCMD (Au1500_CFG_BASE + 0x104) -#define Au1500_PCI_CLASSREV (Au1500_CFG_BASE + 0x108) -#define Au1500_PCI_HDRTYPE (Au1500_CFG_BASE + 0x10C) -#define Au1500_PCI_MBAR (Au1500_CFG_BASE + 0x110) - -#define Au1500_PCI_HDR 0xB4005100 /* virtual, KSEG1 addr */ -/* - * All of our structures, like PCI resource, have 32-bit members. - * Drivers are expected to do an ioremap on the PCI MEM resource, but it's - * hard to store 0x4 0000 0000 in a 32-bit type. We require a small patch - * to __ioremap to check for addresses between (u32)Au1500_PCI_MEM_START and - * (u32)Au1500_PCI_MEM_END and change those to the full 36-bit PCI MEM - * addresses. For PCI I/O, it's simpler because we get to do the ioremap - * ourselves and then adjust the device's resources. +/* The PCI chip selects are outside the 32bit space, and since we can't + * just program the 36bit addresses into BARs, we have to take a chunk + * out of the 32bit space and reserve it for PCI. When these addresses + * are ioremap()ed, they'll be fixed up to the real 36bit address before + * being passed to the real ioremap function. */ -#define Au1500_EXT_CFG 0x600000000ULL -#define Au1500_EXT_CFG_TYPE1 0x680000000ULL -#define Au1500_PCI_IO_START 0x500000000ULL -#define Au1500_PCI_IO_END 0x5000FFFFFULL -#define Au1500_PCI_MEM_START 0x440000000ULL -#define Au1500_PCI_MEM_END 0x44FFFFFFFULL +#define ALCHEMY_PCI_MEMWIN_START (AU1500_PCI_MEM_PHYS_ADDR >> 4) +#define ALCHEMY_PCI_MEMWIN_END (ALCHEMY_PCI_MEMWIN_START + 0x0FFFFFFF) -#define PCI_IO_START 0x00001000 -#define PCI_IO_END 0x000FFFFF -#define PCI_MEM_START 0x40000000 -#define PCI_MEM_END 0x4FFFFFFF +/* for PCI IO it's simpler because we get to do the ioremap ourselves and then + * adjust the device's resources. + */ +#define ALCHEMY_PCI_IOWIN_START 0x00001000 +#define ALCHEMY_PCI_IOWIN_END 0x0000FFFF -#define PCI_FIRST_DEVFN (0 << 3) -#define PCI_LAST_DEVFN (19 << 3) +#ifdef CONFIG_PCI #define IOPORT_RESOURCE_START 0x00001000 /* skip legacy probing */ #define IOPORT_RESOURCE_END 0xffffffff #define IOMEM_RESOURCE_START 0x10000000 #define IOMEM_RESOURCE_END 0xfffffffffULL -#else /* Au1000 and Au1100 and Au1200 */ +#else /* Don't allow any legacy ports probing */ #define IOPORT_RESOURCE_START 0x10000000 @@ -1700,13 +1486,77 @@ enum soc_au1200_ints { #define IOMEM_RESOURCE_START 0x10000000 #define IOMEM_RESOURCE_END 0xfffffffffULL -#define PCI_IO_START 0 -#define PCI_IO_END 0 -#define PCI_MEM_START 0 -#define PCI_MEM_END 0 -#define PCI_FIRST_DEVFN 0 -#define PCI_LAST_DEVFN 0 - #endif +/* PCI controller block register offsets */ +#define PCI_REG_CMEM 0x0000 +#define PCI_REG_CONFIG 0x0004 +#define PCI_REG_B2BMASK_CCH 0x0008 +#define PCI_REG_B2BBASE0_VID 0x000C +#define PCI_REG_B2BBASE1_SID 0x0010 +#define PCI_REG_MWMASK_DEV 0x0014 +#define PCI_REG_MWBASE_REV_CCL 0x0018 +#define PCI_REG_ERR_ADDR 0x001C +#define PCI_REG_SPEC_INTACK 0x0020 +#define PCI_REG_ID 0x0100 +#define PCI_REG_STATCMD 0x0104 +#define PCI_REG_CLASSREV 0x0108 +#define PCI_REG_PARAM 0x010C +#define PCI_REG_MBAR 0x0110 +#define PCI_REG_TIMEOUT 0x0140 + +/* PCI controller block register bits */ +#define PCI_CMEM_E (1 << 28) /* enable cacheable memory */ +#define PCI_CMEM_CMBASE(x) (((x) & 0x3fff) << 14) +#define PCI_CMEM_CMMASK(x) ((x) & 0x3fff) +#define PCI_CONFIG_ERD (1 << 27) /* pci error during R/W */ +#define PCI_CONFIG_ET (1 << 26) /* error in target mode */ +#define PCI_CONFIG_EF (1 << 25) /* fatal error */ +#define PCI_CONFIG_EP (1 << 24) /* parity error */ +#define PCI_CONFIG_EM (1 << 23) /* multiple errors */ +#define PCI_CONFIG_BM (1 << 22) /* bad master error */ +#define PCI_CONFIG_PD (1 << 20) /* PCI Disable */ +#define PCI_CONFIG_BME (1 << 19) /* Byte Mask Enable for reads */ +#define PCI_CONFIG_NC (1 << 16) /* mark mem access non-coherent */ +#define PCI_CONFIG_IA (1 << 15) /* INTA# enabled (target mode) */ +#define PCI_CONFIG_IP (1 << 13) /* int on PCI_PERR# */ +#define PCI_CONFIG_IS (1 << 12) /* int on PCI_SERR# */ +#define PCI_CONFIG_IMM (1 << 11) /* int on master abort */ +#define PCI_CONFIG_ITM (1 << 10) /* int on target abort (as master) */ +#define PCI_CONFIG_ITT (1 << 9) /* int on target abort (as target) */ +#define PCI_CONFIG_IPB (1 << 8) /* int on PERR# in bus master acc */ +#define PCI_CONFIG_SIC_NO (0 << 6) /* no byte mask changes */ +#define PCI_CONFIG_SIC_BA_ADR (1 << 6) /* on byte/hw acc, invert adr bits */ +#define PCI_CONFIG_SIC_HWA_DAT (2 << 6) /* on halfword acc, swap data */ +#define PCI_CONFIG_SIC_ALL (3 << 6) /* swap data bytes on all accesses */ +#define PCI_CONFIG_ST (1 << 5) /* swap data by target transactions */ +#define PCI_CONFIG_SM (1 << 4) /* swap data from PCI ctl */ +#define PCI_CONFIG_AEN (1 << 3) /* enable internal arbiter */ +#define PCI_CONFIG_R2H (1 << 2) /* REQ2# to hi-prio arbiter */ +#define PCI_CONFIG_R1H (1 << 1) /* REQ1# to hi-prio arbiter */ +#define PCI_CONFIG_CH (1 << 0) /* PCI ctl to hi-prio arbiter */ +#define PCI_B2BMASK_B2BMASK(x) (((x) & 0xffff) << 16) +#define PCI_B2BMASK_CCH(x) ((x) & 0xffff) /* 16 upper bits of class code */ +#define PCI_B2BBASE0_VID_B0(x) (((x) & 0xffff) << 16) +#define PCI_B2BBASE0_VID_SV(x) ((x) & 0xffff) +#define PCI_B2BBASE1_SID_B1(x) (((x) & 0xffff) << 16) +#define PCI_B2BBASE1_SID_SI(x) ((x) & 0xffff) +#define PCI_MWMASKDEV_MWMASK(x) (((x) & 0xffff) << 16) +#define PCI_MWMASKDEV_DEVID(x) ((x) & 0xffff) +#define PCI_MWBASEREVCCL_BASE(x) (((x) & 0xffff) << 16) +#define PCI_MWBASEREVCCL_REV(x) (((x) & 0xff) << 8) +#define PCI_MWBASEREVCCL_CCL(x) ((x) & 0xff) +#define PCI_ID_DID(x) (((x) & 0xffff) << 16) +#define PCI_ID_VID(x) ((x) & 0xffff) +#define PCI_STATCMD_STATUS(x) (((x) & 0xffff) << 16) +#define PCI_STATCMD_CMD(x) ((x) & 0xffff) +#define PCI_CLASSREV_CLASS(x) (((x) & 0x00ffffff) << 8) +#define PCI_CLASSREV_REV(x) ((x) & 0xff) +#define PCI_PARAM_BIST(x) (((x) & 0xff) << 24) +#define PCI_PARAM_HT(x) (((x) & 0xff) << 16) +#define PCI_PARAM_LT(x) (((x) & 0xff) << 8) +#define PCI_PARAM_CLS(x) ((x) & 0xff) +#define PCI_TIMEOUT_RETRIES(x) (((x) & 0xff) << 8) /* max retries */ +#define PCI_TIMEOUT_TO(x) ((x) & 0xff) /* target ready timeout */ + #endif |