1 files changed, 0 insertions, 137 deletions

diff --git a/arch/mips/cavium-octeon/serial.c b/arch/mips/cavium-octeon/serial.c
deleted file mode 100644
index 057f0ae88c9..00000000000
--- a/arch/mips/cavium-octeon/serial.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2004-2007 Cavium Networks
- */
-#include <linux/console.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_reg.h>
-#include <linux/tty.h>
-#include <linux/irq.h>
-
-#include <asm/time.h>
-
-#include <asm/octeon/octeon.h>
-
-#define DEBUG_UART 1
-
-unsigned int octeon_serial_in(struct uart_port *up, int offset)
-{
-	int rv = cvmx_read_csr((uint64_t)(up->membase + (offset << 3)));
-	if (offset == UART_IIR && (rv & 0xf) == 7) {
-		/* Busy interrupt, read the USR (39) and try again. */
-		cvmx_read_csr((uint64_t)(up->membase + (39 << 3)));
-		rv = cvmx_read_csr((uint64_t)(up->membase + (offset << 3)));
-	}
-	return rv;
-}
-
-void octeon_serial_out(struct uart_port *up, int offset, int value)
-{
-	/*
-	 * If bits 6 or 7 of the OCTEON UART's LCR are set, it quits
-	 * working.
-	 */
-	if (offset == UART_LCR)
-		value &= 0x9f;
-	cvmx_write_csr((uint64_t)(up->membase + (offset << 3)), (u8)value);
-}
-
-/*
- * Allocated in .bss, so it is all zeroed.
- */
-#define OCTEON_MAX_UARTS 3
-static struct plat_serial8250_port octeon_uart8250_data[OCTEON_MAX_UARTS + 1];
-static struct platform_device octeon_uart8250_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= octeon_uart8250_data,
-	},
-};
-
-static void __init octeon_uart_set_common(struct plat_serial8250_port *p)
-{
-	p->flags = ASYNC_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
-	p->type = PORT_OCTEON;
-	p->iotype = UPIO_MEM;
-	p->regshift = 3;	/* I/O addresses are every 8 bytes */
-	if (octeon_is_simulation())
-		/* Make simulator output fast*/
-		p->uartclk = 115200 * 16;
-	else
-		p->uartclk = octeon_get_io_clock_rate();
-	p->serial_in = octeon_serial_in;
-	p->serial_out = octeon_serial_out;
-}
-
-static int __init octeon_serial_init(void)
-{
-	int enable_uart0;
-	int enable_uart1;
-	int enable_uart2;
-	struct plat_serial8250_port *p;
-
-#ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL
-	/*
-	 * If we are configured to run as the second of two kernels,
-	 * disable uart0 and enable uart1. Uart0 is owned by the first
-	 * kernel
-	 */
-	enable_uart0 = 0;
-	enable_uart1 = 1;
-#else
-	/*
-	 * We are configured for the first kernel. We'll enable uart0
-	 * if the bootloader told us to use 0, otherwise will enable
-	 * uart 1.
-	 */
-	enable_uart0 = (octeon_get_boot_uart() == 0);
-	enable_uart1 = (octeon_get_boot_uart() == 1);
-#ifdef CONFIG_KGDB
-	enable_uart1 = 1;
-#endif
-#endif
-
-	/* Right now CN52XX is the only chip with a third uart */
-	enable_uart2 = OCTEON_IS_MODEL(OCTEON_CN52XX);
-
-	p = octeon_uart8250_data;
-	if (enable_uart0) {
-		/* Add a ttyS device for hardware uart 0 */
-		octeon_uart_set_common(p);
-		p->membase = (void *) CVMX_MIO_UARTX_RBR(0);
-		p->mapbase = CVMX_MIO_UARTX_RBR(0) & ((1ull << 49) - 1);
-		p->irq = OCTEON_IRQ_UART0;
-		p++;
-	}
-
-	if (enable_uart1) {
-		/* Add a ttyS device for hardware uart 1 */
-		octeon_uart_set_common(p);
-		p->membase = (void *) CVMX_MIO_UARTX_RBR(1);
-		p->mapbase = CVMX_MIO_UARTX_RBR(1) & ((1ull << 49) - 1);
-		p->irq = OCTEON_IRQ_UART1;
-		p++;
-	}
-	if (enable_uart2) {
-		/* Add a ttyS device for hardware uart 2 */
-		octeon_uart_set_common(p);
-		p->membase = (void *) CVMX_MIO_UART2_RBR;
-		p->mapbase = CVMX_MIO_UART2_RBR & ((1ull << 49) - 1);
-		p->irq = OCTEON_IRQ_UART2;
-		p++;
-	}
-
-	BUG_ON(p > &octeon_uart8250_data[OCTEON_MAX_UARTS]);
-
-	return platform_device_register(&octeon_uart8250_device);
-}
-
-device_initcall(octeon_serial_init);