aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/bcm47xx/prom.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/bcm47xx/prom.c')
-rw-r--r--arch/mips/bcm47xx/prom.c116
1 files changed, 116 insertions, 0 deletions
diff --git a/arch/mips/bcm47xx/prom.c b/arch/mips/bcm47xx/prom.c
new file mode 100644
index 00000000000..1a03a2f4349
--- /dev/null
+++ b/arch/mips/bcm47xx/prom.c
@@ -0,0 +1,116 @@
+/*
+ * Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org>
+ * Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
+ * Copyright (C) 2010-2012 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/ssb/ssb_driver_chipcommon.h>
+#include <linux/ssb/ssb_regs.h>
+#include <linux/smp.h>
+#include <asm/bootinfo.h>
+#include <bcm47xx.h>
+#include <bcm47xx_board.h>
+
+
+static char bcm47xx_system_type[20] = "Broadcom BCM47XX";
+
+const char *get_system_type(void)
+{
+ return bcm47xx_system_type;
+}
+
+__init void bcm47xx_set_system_type(u16 chip_id)
+{
+ snprintf(bcm47xx_system_type, sizeof(bcm47xx_system_type),
+ (chip_id > 0x9999) ? "Broadcom BCM%d" :
+ "Broadcom BCM%04X",
+ chip_id);
+}
+
+static __init void prom_init_mem(void)
+{
+ unsigned long mem;
+ unsigned long max;
+ unsigned long off;
+ struct cpuinfo_mips *c = &current_cpu_data;
+
+ /* Figure out memory size by finding aliases.
+ *
+ * We should theoretically use the mapping from CFE using cfe_enummem().
+ * However as the BCM47XX is mostly used on low-memory systems, we
+ * want to reuse the memory used by CFE (around 4MB). That means cfe_*
+ * functions stop to work at some point during the boot, we should only
+ * call them at the beginning of the boot.
+ *
+ * BCM47XX uses 128MB for addressing the ram, if the system contains
+ * less that that amount of ram it remaps the ram more often into the
+ * available space.
+ */
+
+ /* Physical address, without mapping to any kernel segment */
+ off = CPHYSADDR((unsigned long)prom_init);
+
+ /* Accessing memory after 128 MiB will cause an exception */
+ max = 128 << 20;
+
+ for (mem = 1 << 20; mem < max; mem += 1 << 20) {
+ /* Loop condition may be not enough, off may be over 1 MiB */
+ if (off + mem >= max) {
+ mem = max;
+ printk(KERN_DEBUG "assume 128MB RAM\n");
+ break;
+ }
+ if (!memcmp(prom_init, prom_init + mem, 32))
+ break;
+ }
+
+ /* Ignoring the last page when ddr size is 128M. Cached
+ * accesses to last page is causing the processor to prefetch
+ * using address above 128M stepping out of the ddr address
+ * space.
+ */
+ if (c->cputype == CPU_74K && (mem == (128 << 20)))
+ mem -= 0x1000;
+
+ add_memory_region(0, mem, BOOT_MEM_RAM);
+}
+
+/*
+ * This is the first serial on the chip common core, it is at this position
+ * for sb (ssb) and ai (bcma) bus.
+ */
+#define BCM47XX_SERIAL_ADDR (SSB_ENUM_BASE + SSB_CHIPCO_UART0_DATA)
+
+void __init prom_init(void)
+{
+ prom_init_mem();
+ setup_8250_early_printk_port(CKSEG1ADDR(BCM47XX_SERIAL_ADDR), 0, 0);
+}
+
+void __init prom_free_prom_memory(void)
+{
+}