diff options
Diffstat (limited to 'arch/mips/au1000/db1x00')
| -rw-r--r-- | arch/mips/au1000/db1x00/Makefile | 9 | ||||
| -rw-r--r-- | arch/mips/au1000/db1x00/board_setup.c | 127 | ||||
| -rw-r--r-- | arch/mips/au1000/db1x00/init.c | 74 | ||||
| -rw-r--r-- | arch/mips/au1000/db1x00/irqmap.c | 72 | ||||
| -rw-r--r-- | arch/mips/au1000/db1x00/mirage_ts.c | 261 |
5 files changed, 0 insertions, 543 deletions
diff --git a/arch/mips/au1000/db1x00/Makefile b/arch/mips/au1000/db1x00/Makefile deleted file mode 100644 index 4c7d763f211..00000000000 --- a/arch/mips/au1000/db1x00/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Copyright 2000 MontaVista Software Inc. -# Author: MontaVista Software, Inc. -# ppopov@mvista.com or source@mvista.com -# -# Makefile for the Alchemy Semiconductor Db1x00 board. - -lib-y := init.o board_setup.o irqmap.o -obj-$(CONFIG_WM97XX_COMODULE) += mirage_ts.o diff --git a/arch/mips/au1000/db1x00/board_setup.c b/arch/mips/au1000/db1x00/board_setup.c deleted file mode 100644 index ac05ba0ff63..00000000000 --- a/arch/mips/au1000/db1x00/board_setup.c +++ /dev/null @@ -1,127 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Alchemy Db1x00 board setup. - * - * Copyright 2000 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/config.h> -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/ioport.h> -#include <linux/mm.h> -#include <linux/console.h> -#include <linux/mc146818rtc.h> -#include <linux/delay.h> - -#include <asm/cpu.h> -#include <asm/bootinfo.h> -#include <asm/irq.h> -#include <asm/mipsregs.h> -#include <asm/reboot.h> -#include <asm/pgtable.h> -#include <asm/mach-au1x00/au1000.h> -#include <asm/mach-db1x00/db1x00.h> - -/* not correct for db1550 */ -static BCSR * const bcsr = (BCSR *)0xAE000000; - -void board_reset (void) -{ - /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */ - au_writel(0x00000000, 0xAE00001C); -} - -void __init board_setup(void) -{ - u32 pin_func; - - pin_func = 0; - /* not valid for 1550 */ -#ifdef CONFIG_AU1X00_USB_DEVICE - // 2nd USB port is USB device - pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000); - au_writel(pin_func, SYS_PINFUNC); -#endif - -#if defined(CONFIG_IRDA) && (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100)) - /* set IRFIRSEL instead of GPIO15 */ - pin_func = au_readl(SYS_PINFUNC) | (u32)((1<<8)); - au_writel(pin_func, SYS_PINFUNC); - /* power off until the driver is in use */ - bcsr->resets &= ~BCSR_RESETS_IRDA_MODE_MASK; - bcsr->resets |= BCSR_RESETS_IRDA_MODE_OFF; - au_sync(); -#endif - au_writel(0, 0xAE000010); /* turn off pcmcia power */ - -#ifdef CONFIG_MIPS_MIRAGE - /* enable GPIO[31:0] inputs */ - au_writel(0, SYS_PININPUTEN); - - /* GPIO[20] is output, tristate the other input primary GPIO's */ - au_writel((u32)(~(1<<20)), SYS_TRIOUTCLR); - - /* set GPIO[210:208] instead of SSI_0 */ - pin_func = au_readl(SYS_PINFUNC) | (u32)(1); - - /* set GPIO[215:211] for LED's */ - pin_func |= (u32)((5<<2)); - - /* set GPIO[214:213] for more LED's */ - pin_func |= (u32)((5<<12)); - - /* set GPIO[207:200] instead of PCMCIA/LCD */ - pin_func |= (u32)((3<<17)); - au_writel(pin_func, SYS_PINFUNC); - - /* Enable speaker amplifier. This should - * be part of the audio driver. - */ - au_writel(au_readl(GPIO2_DIR) | 0x200, GPIO2_DIR); - au_writel(0x02000200, GPIO2_OUTPUT); -#endif - - au_sync(); - -#ifdef CONFIG_MIPS_DB1000 - printk("AMD Alchemy Au1000/Db1000 Board\n"); -#endif -#ifdef CONFIG_MIPS_DB1500 - printk("AMD Alchemy Au1500/Db1500 Board\n"); -#endif -#ifdef CONFIG_MIPS_DB1100 - printk("AMD Alchemy Au1100/Db1100 Board\n"); -#endif -#ifdef CONFIG_MIPS_BOSPORUS - printk("AMD Alchemy Bosporus Board\n"); -#endif -#ifdef CONFIG_MIPS_MIRAGE - printk("AMD Alchemy Mirage Board\n"); -#endif -#ifdef CONFIG_MIPS_DB1550 - printk("AMD Alchemy Au1550/Db1550 Board\n"); -#endif -} diff --git a/arch/mips/au1000/db1x00/init.c b/arch/mips/au1000/db1x00/init.c deleted file mode 100644 index 51eee94a5e8..00000000000 --- a/arch/mips/au1000/db1x00/init.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * PB1000 board setup - * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/bootmem.h> -#include <asm/addrspace.h> -#include <asm/bootinfo.h> -#include <linux/config.h> -#include <linux/string.h> -#include <linux/kernel.h> - -int prom_argc; -char **prom_argv, **prom_envp; -extern void __init prom_init_cmdline(void); -extern char *prom_getenv(char *envname); - -const char *get_system_type(void) -{ -#ifdef CONFIG_MIPS_BOSPORUS - return "Alchemy Bosporus Gateway Reference"; -#else - return "Alchemy Db1x00"; -#endif -} - -void __init prom_init(void) -{ - unsigned char *memsize_str; - unsigned long memsize; - - prom_argc = fw_arg0; - prom_argv = (char **) fw_arg1; - prom_envp = (char **) fw_arg2; - - mips_machgroup = MACH_GROUP_ALCHEMY; - mips_machtype = MACH_DB1000; /* set the platform # */ - - prom_init_cmdline(); - - memsize_str = prom_getenv("memsize"); - if (!memsize_str) - memsize = 0x04000000; - else - memsize = simple_strtol(memsize_str, NULL, 0); - add_memory_region(0, memsize, BOOT_MEM_RAM); -} diff --git a/arch/mips/au1000/db1x00/irqmap.c b/arch/mips/au1000/db1x00/irqmap.c deleted file mode 100644 index 8f6ef0dbe1f..00000000000 --- a/arch/mips/au1000/db1x00/irqmap.c +++ /dev/null @@ -1,72 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Au1xxx irq map table - * - * Copyright 2003 Embedded Edge, LLC - * dan@embeddededge.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/config.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/kernel_stat.h> -#include <linux/module.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/timex.h> -#include <linux/slab.h> -#include <linux/random.h> -#include <linux/delay.h> -#include <linux/bitops.h> - -#include <asm/bootinfo.h> -#include <asm/io.h> -#include <asm/mipsregs.h> -#include <asm/system.h> -#include <asm/mach-au1x00/au1000.h> - -au1xxx_irq_map_t au1xxx_irq_map[] = { - -#ifndef CONFIG_MIPS_MIRAGE -#ifdef CONFIG_MIPS_DB1550 - { AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 IRQ# */ - { AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 IRQ# */ -#else - { AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 Fully_Interted# */ - { AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 STSCHG# */ - { AU1000_GPIO_2, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 IRQ# */ - - { AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 Fully_Interted# */ - { AU1000_GPIO_4, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 STSCHG# */ - { AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 IRQ# */ -#endif -#else - { AU1000_GPIO_7, INTC_INT_RISE_EDGE, 0 }, /* touchscreen pen down */ -#endif - -}; - -int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t); diff --git a/arch/mips/au1000/db1x00/mirage_ts.c b/arch/mips/au1000/db1x00/mirage_ts.c deleted file mode 100644 index ade35e43200..00000000000 --- a/arch/mips/au1000/db1x00/mirage_ts.c +++ /dev/null @@ -1,261 +0,0 @@ -/* - * linux/arch/mips/au1000/db1x00/mirage_ts.c - * - * BRIEF MODULE DESCRIPTION - * Glue between Mirage board-specific touchscreen pieces - * and generic Wolfson Codec touchscreen support. - * - * Based on pb1100_ts.c used in Hydrogen II. - * - * Copyright (c) 2003 Embedded Edge, LLC - * dan@embeddededge.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/config.h> -#include <linux/types.h> -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/fs.h> -#include <linux/poll.h> -#include <linux/proc_fs.h> -#include <linux/smp.h> -#include <linux/smp_lock.h> -#include <linux/wait.h> - -#include <asm/segment.h> -#include <asm/irq.h> -#include <asm/uaccess.h> -#include <asm/delay.h> -#include <asm/au1000.h> - -/* - * Imported interface to Wolfson Codec driver. - */ -extern void *wm97xx_ts_get_handle(int which); -extern int wm97xx_ts_ready(void* ts_handle); -extern void wm97xx_ts_set_cal(void* ts_handle, int xscale, int xtrans, int yscale, int ytrans); -extern u16 wm97xx_ts_get_ac97(void* ts_handle, u8 reg); -extern void wm97xx_ts_set_ac97(void* ts_handle, u8 reg, u16 val); -extern int wm97xx_ts_read_data(void* ts_handle, long* x, long* y, long* pressure); -extern void wm97xx_ts_send_data(void* ts_handle, long x, long y, long z); - -int wm97xx_comodule_present = 1; - - -#define TS_NAME "mirage_ts" - -#define err(format, arg...) printk(KERN_ERR TS_NAME ": " format "\n" , ## arg) -#define info(format, arg...) printk(KERN_INFO TS_NAME ": " format "\n" , ## arg) -#define warn(format, arg...) printk(KERN_WARNING TS_NAME ": " format "\n" , ## arg) -#define DPRINTK(format, arg...) printk("%s: " format "\n", __FUNCTION__ , ## arg) - - -#define PEN_DOWN_IRQ AU1000_GPIO_7 - -static struct task_struct *ts_task = 0; -static DECLARE_COMPLETION(ts_complete); -static DECLARE_WAIT_QUEUE_HEAD(pendown_wait); - -#ifdef CONFIG_WM97XX_FIVEWIRETS -static int release_pressure = 1; -#else -static int release_pressure = 50; -#endif - -typedef struct { - long x; - long y; -} DOWN_EVENT; - -#define SAMPLE_RATE 50 /* samples per second */ -#define PEN_DEBOUNCE 5 /* samples for settling - fn of SAMPLE_RATE */ -#define PEN_UP_TIMEOUT 10 /* in seconds */ -#define PEN_UP_SETTLE 5 /* samples per second */ - -static struct { - int xscale; - int xtrans; - int yscale; - int ytrans; -} mirage_ts_cal = -{ -#if 0 - xscale: 84, - xtrans: -157, - yscale: 66, - ytrans: -150, -#else - xscale: 84, - xtrans: -150, - yscale: 66, - ytrans: -146, -#endif -}; - - -static void pendown_irq(int irqnr, void *devid, struct pt_regs *regs) -{ -//DPRINTK("got one 0x%x", au_readl(SYS_PINSTATERD)); - wake_up(&pendown_wait); -} - -static int ts_thread(void *id) -{ - static int pen_was_down = 0; - static DOWN_EVENT pen_xy; - long x, y, z; - void *ts; /* handle */ - struct task_struct *tsk = current; - int timeout = HZ / SAMPLE_RATE; - - ts_task = tsk; - - daemonize(); - tsk->tty = NULL; - tsk->policy = SCHED_FIFO; - tsk->rt_priority = 1; - strcpy(tsk->comm, "touchscreen"); - - /* only want to receive SIGKILL */ - spin_lock_irq(&tsk->sigmask_lock); - siginitsetinv(&tsk->blocked, sigmask(SIGKILL)); - recalc_sigpending(tsk); - spin_unlock_irq(&tsk->sigmask_lock); - - /* get handle for codec */ - ts = wm97xx_ts_get_handle(0); - - /* proceed only after everybody is ready */ - wait_event_timeout(pendown_wait, wm97xx_ts_ready(ts), HZ/4); - - /* board-specific calibration */ - wm97xx_ts_set_cal(ts, - mirage_ts_cal.xscale, - mirage_ts_cal.xtrans, - mirage_ts_cal.yscale, - mirage_ts_cal.ytrans); - - /* route Wolfson pendown interrupts to our GPIO */ - au_sync(); - wm97xx_ts_set_ac97(ts, 0x4c, wm97xx_ts_get_ac97(ts, 0x4c) & ~0x0008); - au_sync(); - wm97xx_ts_set_ac97(ts, 0x56, wm97xx_ts_get_ac97(ts, 0x56) & ~0x0008); - au_sync(); - wm97xx_ts_set_ac97(ts, 0x52, wm97xx_ts_get_ac97(ts, 0x52) | 0x2008); - au_sync(); - - for (;;) { - interruptible_sleep_on_timeout(&pendown_wait, timeout); - disable_irq(PEN_DOWN_IRQ); - if (signal_pending(tsk)) { - break; - } - - /* read codec */ - if (!wm97xx_ts_read_data(ts, &x, &y, &z)) - z = 0; /* treat no-data and pen-up the same */ - - if (signal_pending(tsk)) { - break; - } - - if (z >= release_pressure) { - y = ~y; /* top to bottom */ - if (pen_was_down > 1 /*&& pen_was_down < PEN_DEBOUNCE*/) {//THXXX - /* bounce ? */ - x = pen_xy.x; - y = pen_xy.y; - --pen_was_down; - } else if (pen_was_down <= 1) { - pen_xy.x = x; - pen_xy.y = y; - if (pen_was_down) - wm97xx_ts_send_data(ts, x, y, z); - pen_was_down = PEN_DEBOUNCE; - } - //wm97xx_ts_send_data(ts, x, y, z); - timeout = HZ / SAMPLE_RATE; - } else { - if (pen_was_down) { - if (--pen_was_down) - z = release_pressure; - else //THXXX - wm97xx_ts_send_data(ts, pen_xy.x, pen_xy.y, z); - } - /* The pendown signal takes some time to settle after - * reading the pen pressure so wait a little - * before enabling the pen. - */ - if (! pen_was_down) { -// interruptible_sleep_on_timeout(&pendown_wait, HZ / PEN_UP_SETTLE); - timeout = HZ * PEN_UP_TIMEOUT; - } - } - enable_irq(PEN_DOWN_IRQ); - } - enable_irq(PEN_DOWN_IRQ); - ts_task = NULL; - complete(&ts_complete); - return 0; -} - -static int __init ts_mirage_init(void) -{ - int ret; - - /* pen down signal is connected to GPIO 7 */ - - ret = request_irq(PEN_DOWN_IRQ, pendown_irq, 0, "ts-pendown", NULL); - if (ret) { - err("unable to get pendown irq%d: [%d]", PEN_DOWN_IRQ, ret); - return ret; - } - - lock_kernel(); - ret = kernel_thread(ts_thread, NULL, CLONE_FS | CLONE_FILES); - if (ret < 0) { - unlock_kernel(); - return ret; - } - unlock_kernel(); - - info("Mirage touchscreen IRQ initialized."); - - return 0; -} - -static void __exit ts_mirage_exit(void) -{ - if (ts_task) { - send_sig(SIGKILL, ts_task, 1); - wait_for_completion(&ts_complete); - } - - free_irq(PEN_DOWN_IRQ, NULL); -} - -module_init(ts_mirage_init); -module_exit(ts_mirage_exit); - |