diff options
Diffstat (limited to 'arch/mips/alchemy/devboards/db1000.c')
| -rw-r--r-- | arch/mips/alchemy/devboards/db1000.c | 70 |
1 files changed, 22 insertions, 48 deletions
diff --git a/arch/mips/alchemy/devboards/db1000.c b/arch/mips/alchemy/devboards/db1000.c index 8187845650f..92dd929d405 100644 --- a/arch/mips/alchemy/devboards/db1000.c +++ b/arch/mips/alchemy/devboards/db1000.c @@ -41,42 +41,27 @@ #define F_SWAPPED (bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT) -struct pci_dev; +const char *get_system_type(void); -static const char *board_type_str(void) +int __init db1000_board_setup(void) { + /* initialize board register space */ + bcsr_init(DB1000_BCSR_PHYS_ADDR, + DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS); + switch (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI))) { case BCSR_WHOAMI_DB1000: - return "DB1000"; case BCSR_WHOAMI_DB1500: - return "DB1500"; case BCSR_WHOAMI_DB1100: - return "DB1100"; case BCSR_WHOAMI_PB1500: case BCSR_WHOAMI_PB1500R2: - return "PB1500"; case BCSR_WHOAMI_PB1100: - return "PB1100"; - default: - return "(unknown)"; + pr_info("AMD Alchemy %s Board\n", get_system_type()); + return 0; } + return -ENODEV; } -const char *get_system_type(void) -{ - return board_type_str(); -} - -void __init board_setup(void) -{ - /* initialize board register space */ - bcsr_init(DB1000_BCSR_PHYS_ADDR, - DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS); - - printk(KERN_INFO "AMD Alchemy %s Board\n", board_type_str()); -} - - static int db1500_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) { if ((slot < 12) || (slot > 13) || pin == 0) @@ -114,17 +99,10 @@ static struct platform_device db1500_pci_host_dev = { .resource = alchemy_pci_host_res, }; -static int __init db1500_pci_init(void) +int __init db1500_pci_setup(void) { - int id = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)); - if ((id == BCSR_WHOAMI_DB1500) || (id == BCSR_WHOAMI_PB1500) || - (id == BCSR_WHOAMI_PB1500R2)) - return platform_device_register(&db1500_pci_host_dev); - return 0; + return platform_device_register(&db1500_pci_host_dev); } -/* must be arch_initcall; MIPS PCI scans busses in a subsys_initcall */ -arch_initcall(db1500_pci_init); - static struct resource au1100_lcd_resources[] = { [0] = { @@ -276,7 +254,7 @@ static void db1100_mmcled_set(struct led_classdev *led, enum led_brightness b) } static struct led_classdev db1100_mmc_led = { - .brightness_set = db1100_mmcled_set, + .brightness_set = db1100_mmcled_set, }; static int db1100_mmc1_card_readonly(void *mmc_host) @@ -314,7 +292,7 @@ static void db1100_mmc1led_set(struct led_classdev *led, enum led_brightness b) } static struct led_classdev db1100_mmc1_led = { - .brightness_set = db1100_mmc1led_set, + .brightness_set = db1100_mmc1led_set, }; static struct au1xmmc_platform_data db1100_mmc_platdata[2] = { @@ -357,7 +335,7 @@ static struct resource au1100_mmc0_resources[] = { } }; -static u64 au1xxx_mmc_dmamask = DMA_BIT_MASK(32); +static u64 au1xxx_mmc_dmamask = DMA_BIT_MASK(32); static struct platform_device db1100_mmc0_dev = { .name = "au1xxx-mmc", @@ -482,7 +460,7 @@ static struct spi_board_info db1100_spi_info[] __initdata = { .mode = 0, .irq = AU1100_GPIO21_INT, .platform_data = &db1100_touch_pd, - .controller_data = (void *)210, /* for spi_gpio: CS# GPIO210 */ + .controller_data = (void *)210, /* for spi_gpio: CS# GPIO210 */ }, }; @@ -513,7 +491,7 @@ static struct platform_device *db1100_devs[] = { &db1000_irda_dev, }; -static int __init db1000_dev_init(void) +int __init db1000_dev_setup(void) { int board = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)); int c0, c1, d0, d1, s0, s1, flashsize = 32, twosocks = 1; @@ -534,13 +512,10 @@ static int __init db1000_dev_init(void) s0 = AU1100_GPIO1_INT; s1 = AU1100_GPIO4_INT; + gpio_request(19, "sd0_cd"); + gpio_request(20, "sd1_cd"); gpio_direction_input(19); /* sd0 cd# */ gpio_direction_input(20); /* sd1 cd# */ - gpio_direction_input(21); /* touch pendown# */ - gpio_direction_input(207); /* SPI MISO */ - gpio_direction_output(208, 0); /* SPI MOSI */ - gpio_direction_output(209, 1); /* SPI SCK */ - gpio_direction_output(210, 1); /* SPI CS# */ /* spi_gpio on SSI0 pins */ pfc = __raw_readl((void __iomem *)SYS_PINFUNC); @@ -572,7 +547,7 @@ static int __init db1000_dev_init(void) irq_set_irq_type(AU1500_GPIO204_INT, IRQ_TYPE_LEVEL_LOW); irq_set_irq_type(AU1500_GPIO205_INT, IRQ_TYPE_LEVEL_LOW); /* EPSON S1D13806 0x1b000000 - * SRAM 1MB/2MB 0x1a000000 + * SRAM 1MB/2MB 0x1a000000 * DS1693 RTC 0x0c000000 */ } else if (board == BCSR_WHOAMI_PB1100) { @@ -586,7 +561,7 @@ static int __init db1000_dev_init(void) irq_set_irq_type(AU1100_GPIO12_INT, IRQ_TYPE_LEVEL_LOW); irq_set_irq_type(AU1100_GPIO13_INT, IRQ_TYPE_LEVEL_LOW); /* EPSON S1D13806 0x1b000000 - * SRAM 1MB/2MB 0x1a000000 + * SRAM 1MB/2MB 0x1a000000 * DiskOnChip 0x0d000000 * DS1693 RTC 0x0c000000 */ @@ -605,7 +580,7 @@ static int __init db1000_dev_init(void) AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, AU1000_PCMCIA_IO_PHYS_ADDR, AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, - c0, d0, /*s0*/0, 0, 0); + c0, d0, /*s0*/0, 0, 0); if (twosocks) { irq_set_irq_type(d1, IRQ_TYPE_EDGE_BOTH); @@ -619,11 +594,10 @@ static int __init db1000_dev_init(void) AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004400000 - 1, AU1000_PCMCIA_IO_PHYS_ADDR + 0x004000000, AU1000_PCMCIA_IO_PHYS_ADDR + 0x004010000 - 1, - c1, d1, /*s1*/0, 0, 1); + c1, d1, /*s1*/0, 0, 1); } platform_add_devices(db1x00_devs, ARRAY_SIZE(db1x00_devs)); db1x_register_norflash(flashsize << 20, 4 /* 32bit */, F_SWAPPED); return 0; } -device_initcall(db1000_dev_init); |