diff options
Diffstat (limited to 'arch/mips/alchemy/common/irq.c')
| -rw-r--r-- | arch/mips/alchemy/common/irq.c | 1329 |
1 files changed, 865 insertions, 464 deletions
diff --git a/arch/mips/alchemy/common/irq.c b/arch/mips/alchemy/common/irq.c index 40c6ceceb5f..63a71817a00 100644 --- a/arch/mips/alchemy/common/irq.c +++ b/arch/mips/alchemy/common/irq.c @@ -24,573 +24,974 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/bitops.h> + +#include <linux/export.h> #include <linux/init.h> #include <linux/interrupt.h> -#include <linux/irq.h> +#include <linux/slab.h> +#include <linux/syscore_ops.h> #include <asm/irq_cpu.h> -#include <asm/mipsregs.h> #include <asm/mach-au1x00/au1000.h> -#ifdef CONFIG_MIPS_PB1000 -#include <asm/mach-pb1x00/pb1000.h> -#endif +#include <asm/mach-au1x00/gpio-au1300.h> + +/* Interrupt Controller register offsets */ +#define IC_CFG0RD 0x40 +#define IC_CFG0SET 0x40 +#define IC_CFG0CLR 0x44 +#define IC_CFG1RD 0x48 +#define IC_CFG1SET 0x48 +#define IC_CFG1CLR 0x4C +#define IC_CFG2RD 0x50 +#define IC_CFG2SET 0x50 +#define IC_CFG2CLR 0x54 +#define IC_REQ0INT 0x54 +#define IC_SRCRD 0x58 +#define IC_SRCSET 0x58 +#define IC_SRCCLR 0x5C +#define IC_REQ1INT 0x5C +#define IC_ASSIGNRD 0x60 +#define IC_ASSIGNSET 0x60 +#define IC_ASSIGNCLR 0x64 +#define IC_WAKERD 0x68 +#define IC_WAKESET 0x68 +#define IC_WAKECLR 0x6C +#define IC_MASKRD 0x70 +#define IC_MASKSET 0x70 +#define IC_MASKCLR 0x74 +#define IC_RISINGRD 0x78 +#define IC_RISINGCLR 0x78 +#define IC_FALLINGRD 0x7C +#define IC_FALLINGCLR 0x7C +#define IC_TESTBIT 0x80 + +/* per-processor fixed function irqs */ +struct alchemy_irqmap { + int irq; /* linux IRQ number */ + int type; /* IRQ_TYPE_ */ + int prio; /* irq priority, 0 highest, 3 lowest */ + int internal; /* GPIC: internal source (no ext. pin)? */ +}; -#define EXT_INTC0_REQ0 2 /* IP 2 */ -#define EXT_INTC0_REQ1 3 /* IP 3 */ -#define EXT_INTC1_REQ0 4 /* IP 4 */ -#define EXT_INTC1_REQ1 5 /* IP 5 */ -#define MIPS_TIMER_IP 7 /* IP 7 */ +static int au1x_ic_settype(struct irq_data *d, unsigned int type); +static int au1300_gpic_settype(struct irq_data *d, unsigned int type); -void (*board_init_irq)(void) __initdata = NULL; -static DEFINE_SPINLOCK(irq_lock); +/* NOTE on interrupt priorities: The original writers of this code said: + * + * Because of the tight timing of SETUP token to reply transactions, + * the USB devices-side packet complete interrupt (USB_DEV_REQ_INT) + * needs the highest priority. + */ +struct alchemy_irqmap au1000_irqmap[] __initdata = { + { AU1000_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_UART2_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 0 }, + { AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0, 0 }, + { AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1000_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { -1, }, +}; -#ifdef CONFIG_PM +struct alchemy_irqmap au1500_irqmap[] __initdata = { + { AU1500_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1500_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1500_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1500_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1500_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1500_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1500_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1500_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1500_RTC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1500_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1500_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1500_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 0 }, + { AU1500_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0, 0 }, + { AU1500_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1500_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1500_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1500_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_AC97C_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { -1, }, +}; -/* - * Save/restore the interrupt controller state. - * Called from the save/restore core registers as part of the - * au_sleep function in power.c.....maybe I should just pm_register() - * them instead? - */ -static unsigned int sleep_intctl_config0[2]; -static unsigned int sleep_intctl_config1[2]; -static unsigned int sleep_intctl_config2[2]; -static unsigned int sleep_intctl_src[2]; -static unsigned int sleep_intctl_assign[2]; -static unsigned int sleep_intctl_wake[2]; -static unsigned int sleep_intctl_mask[2]; - -void save_au1xxx_intctl(void) -{ - sleep_intctl_config0[0] = au_readl(IC0_CFG0RD); - sleep_intctl_config1[0] = au_readl(IC0_CFG1RD); - sleep_intctl_config2[0] = au_readl(IC0_CFG2RD); - sleep_intctl_src[0] = au_readl(IC0_SRCRD); - sleep_intctl_assign[0] = au_readl(IC0_ASSIGNRD); - sleep_intctl_wake[0] = au_readl(IC0_WAKERD); - sleep_intctl_mask[0] = au_readl(IC0_MASKRD); - - sleep_intctl_config0[1] = au_readl(IC1_CFG0RD); - sleep_intctl_config1[1] = au_readl(IC1_CFG1RD); - sleep_intctl_config2[1] = au_readl(IC1_CFG2RD); - sleep_intctl_src[1] = au_readl(IC1_SRCRD); - sleep_intctl_assign[1] = au_readl(IC1_ASSIGNRD); - sleep_intctl_wake[1] = au_readl(IC1_WAKERD); - sleep_intctl_mask[1] = au_readl(IC1_MASKRD); -} +struct alchemy_irqmap au1100_irqmap[] __initdata = { + { AU1100_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_SD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1100_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1100_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1100_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1100_RTC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1100_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1100_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1100_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 0 }, + { AU1100_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0, 0 }, + { AU1100_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1100_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1100_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1100_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_AC97C_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { -1, }, +}; -/* - * For most restore operations, we clear the entire register and - * then set the bits we found during the save. - */ -void restore_au1xxx_intctl(void) -{ - au_writel(0xffffffff, IC0_MASKCLR); au_sync(); - - au_writel(0xffffffff, IC0_CFG0CLR); au_sync(); - au_writel(sleep_intctl_config0[0], IC0_CFG0SET); au_sync(); - au_writel(0xffffffff, IC0_CFG1CLR); au_sync(); - au_writel(sleep_intctl_config1[0], IC0_CFG1SET); au_sync(); - au_writel(0xffffffff, IC0_CFG2CLR); au_sync(); - au_writel(sleep_intctl_config2[0], IC0_CFG2SET); au_sync(); - au_writel(0xffffffff, IC0_SRCCLR); au_sync(); - au_writel(sleep_intctl_src[0], IC0_SRCSET); au_sync(); - au_writel(0xffffffff, IC0_ASSIGNCLR); au_sync(); - au_writel(sleep_intctl_assign[0], IC0_ASSIGNSET); au_sync(); - au_writel(0xffffffff, IC0_WAKECLR); au_sync(); - au_writel(sleep_intctl_wake[0], IC0_WAKESET); au_sync(); - au_writel(0xffffffff, IC0_RISINGCLR); au_sync(); - au_writel(0xffffffff, IC0_FALLINGCLR); au_sync(); - au_writel(0x00000000, IC0_TESTBIT); au_sync(); - - au_writel(0xffffffff, IC1_MASKCLR); au_sync(); - - au_writel(0xffffffff, IC1_CFG0CLR); au_sync(); - au_writel(sleep_intctl_config0[1], IC1_CFG0SET); au_sync(); - au_writel(0xffffffff, IC1_CFG1CLR); au_sync(); - au_writel(sleep_intctl_config1[1], IC1_CFG1SET); au_sync(); - au_writel(0xffffffff, IC1_CFG2CLR); au_sync(); - au_writel(sleep_intctl_config2[1], IC1_CFG2SET); au_sync(); - au_writel(0xffffffff, IC1_SRCCLR); au_sync(); - au_writel(sleep_intctl_src[1], IC1_SRCSET); au_sync(); - au_writel(0xffffffff, IC1_ASSIGNCLR); au_sync(); - au_writel(sleep_intctl_assign[1], IC1_ASSIGNSET); au_sync(); - au_writel(0xffffffff, IC1_WAKECLR); au_sync(); - au_writel(sleep_intctl_wake[1], IC1_WAKESET); au_sync(); - au_writel(0xffffffff, IC1_RISINGCLR); au_sync(); - au_writel(0xffffffff, IC1_FALLINGCLR); au_sync(); - au_writel(0x00000000, IC1_TESTBIT); au_sync(); - - au_writel(sleep_intctl_mask[1], IC1_MASKSET); au_sync(); - - au_writel(sleep_intctl_mask[0], IC0_MASKSET); au_sync(); -} -#endif /* CONFIG_PM */ - - -inline void local_enable_irq(unsigned int irq_nr) -{ - unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE; - - if (bit >= 32) { - au_writel(1 << (bit - 32), IC1_MASKSET); - au_writel(1 << (bit - 32), IC1_WAKESET); - } else { - au_writel(1 << bit, IC0_MASKSET); - au_writel(1 << bit, IC0_WAKESET); - } - au_sync(); -} +struct alchemy_irqmap au1550_irqmap[] __initdata = { + { AU1550_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1550_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1550_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_CRYPTO_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1550_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1550_PCI_RST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1550_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_PSC2_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_PSC3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1550_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1550_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1550_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1550_RTC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1550_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1550_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1550_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 0 }, + { AU1550_NAND_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0, 0 }, + { AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1550_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1550_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { -1, }, +}; +struct alchemy_irqmap au1200_irqmap[] __initdata = { + { AU1200_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_SWT_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1200_SD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_MAE_BE_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_MAE_FE_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_AES_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_CAMERA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1200_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1200_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1200_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1200_RTC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1200_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1200_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1200_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 0 }, + { AU1200_NAND_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1200_USB_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_MAE_BOTH_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { -1, }, +}; -inline void local_disable_irq(unsigned int irq_nr) +static struct alchemy_irqmap au1300_irqmap[] __initdata = { + /* multifunction: gpio pin or device */ + { AU1300_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + { AU1300_UART2_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + { AU1300_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + { AU1300_SD1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + { AU1300_SD2_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + { AU1300_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + { AU1300_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + { AU1300_PSC2_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + { AU1300_PSC3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + { AU1300_NAND_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + /* au1300 internal */ + { AU1300_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_MMU_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_MPU_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_GPU_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_UDMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, + { AU1300_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, + { AU1300_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, + { AU1300_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, + { AU1300_RTC_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, + { AU1300_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, + { AU1300_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, + { AU1300_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 1, }, + { AU1300_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_SD0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_USB_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_BSA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_MPE_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, + { AU1300_ITE_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_AES_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_CIM_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { -1, }, /* terminator */ +}; + +/******************************************************************************/ + +static void au1x_ic0_unmask(struct irq_data *d) { - unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE; + unsigned int bit = d->irq - AU1000_INTC0_INT_BASE; + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); - if (bit >= 32) { - au_writel(1 << (bit - 32), IC1_MASKCLR); - au_writel(1 << (bit - 32), IC1_WAKECLR); - } else { - au_writel(1 << bit, IC0_MASKCLR); - au_writel(1 << bit, IC0_WAKECLR); - } - au_sync(); + __raw_writel(1 << bit, base + IC_MASKSET); + __raw_writel(1 << bit, base + IC_WAKESET); + wmb(); } - -static inline void mask_and_ack_rise_edge_irq(unsigned int irq_nr) +static void au1x_ic1_unmask(struct irq_data *d) { - unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE; + unsigned int bit = d->irq - AU1000_INTC1_INT_BASE; + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); - if (bit >= 32) { - au_writel(1 << (bit - 32), IC1_RISINGCLR); - au_writel(1 << (bit - 32), IC1_MASKCLR); - } else { - au_writel(1 << bit, IC0_RISINGCLR); - au_writel(1 << bit, IC0_MASKCLR); - } - au_sync(); + __raw_writel(1 << bit, base + IC_MASKSET); + __raw_writel(1 << bit, base + IC_WAKESET); + wmb(); } - -static inline void mask_and_ack_fall_edge_irq(unsigned int irq_nr) +static void au1x_ic0_mask(struct irq_data *d) { - unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE; + unsigned int bit = d->irq - AU1000_INTC0_INT_BASE; + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); - if (bit >= 32) { - au_writel(1 << (bit - 32), IC1_FALLINGCLR); - au_writel(1 << (bit - 32), IC1_MASKCLR); - } else { - au_writel(1 << bit, IC0_FALLINGCLR); - au_writel(1 << bit, IC0_MASKCLR); - } - au_sync(); + __raw_writel(1 << bit, base + IC_MASKCLR); + __raw_writel(1 << bit, base + IC_WAKECLR); + wmb(); } +static void au1x_ic1_mask(struct irq_data *d) +{ + unsigned int bit = d->irq - AU1000_INTC1_INT_BASE; + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); + + __raw_writel(1 << bit, base + IC_MASKCLR); + __raw_writel(1 << bit, base + IC_WAKECLR); + wmb(); +} -static inline void mask_and_ack_either_edge_irq(unsigned int irq_nr) +static void au1x_ic0_ack(struct irq_data *d) { - unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE; + unsigned int bit = d->irq - AU1000_INTC0_INT_BASE; + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); /* * This may assume that we don't get interrupts from * both edges at once, or if we do, that we don't care. */ - if (bit >= 32) { - au_writel(1 << (bit - 32), IC1_FALLINGCLR); - au_writel(1 << (bit - 32), IC1_RISINGCLR); - au_writel(1 << (bit - 32), IC1_MASKCLR); - } else { - au_writel(1 << bit, IC0_FALLINGCLR); - au_writel(1 << bit, IC0_RISINGCLR); - au_writel(1 << bit, IC0_MASKCLR); - } - au_sync(); + __raw_writel(1 << bit, base + IC_FALLINGCLR); + __raw_writel(1 << bit, base + IC_RISINGCLR); + wmb(); } -static inline void mask_and_ack_level_irq(unsigned int irq_nr) +static void au1x_ic1_ack(struct irq_data *d) { - local_disable_irq(irq_nr); - au_sync(); -#if defined(CONFIG_MIPS_PB1000) - if (irq_nr == AU1000_GPIO_15) { - au_writel(0x8000, PB1000_MDR); /* ack int */ - au_sync(); - } -#endif + unsigned int bit = d->irq - AU1000_INTC1_INT_BASE; + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); + + /* + * This may assume that we don't get interrupts from + * both edges at once, or if we do, that we don't care. + */ + __raw_writel(1 << bit, base + IC_FALLINGCLR); + __raw_writel(1 << bit, base + IC_RISINGCLR); + wmb(); } -static void end_irq(unsigned int irq_nr) +static void au1x_ic0_maskack(struct irq_data *d) { - if (!(irq_desc[irq_nr].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - local_enable_irq(irq_nr); - -#if defined(CONFIG_MIPS_PB1000) - if (irq_nr == AU1000_GPIO_15) { - au_writel(0x4000, PB1000_MDR); /* enable int */ - au_sync(); - } -#endif + unsigned int bit = d->irq - AU1000_INTC0_INT_BASE; + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); + + __raw_writel(1 << bit, base + IC_WAKECLR); + __raw_writel(1 << bit, base + IC_MASKCLR); + __raw_writel(1 << bit, base + IC_RISINGCLR); + __raw_writel(1 << bit, base + IC_FALLINGCLR); + wmb(); } -unsigned long save_local_and_disable(int controller) +static void au1x_ic1_maskack(struct irq_data *d) { - int i; - unsigned long flags, mask; - - spin_lock_irqsave(&irq_lock, flags); - if (controller) { - mask = au_readl(IC1_MASKSET); - for (i = 32; i < 64; i++) - local_disable_irq(i); - } else { - mask = au_readl(IC0_MASKSET); - for (i = 0; i < 32; i++) - local_disable_irq(i); - } - spin_unlock_irqrestore(&irq_lock, flags); - - return mask; + unsigned int bit = d->irq - AU1000_INTC1_INT_BASE; + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); + + __raw_writel(1 << bit, base + IC_WAKECLR); + __raw_writel(1 << bit, base + IC_MASKCLR); + __raw_writel(1 << bit, base + IC_RISINGCLR); + __raw_writel(1 << bit, base + IC_FALLINGCLR); + wmb(); } -void restore_local_and_enable(int controller, unsigned long mask) +static int au1x_ic1_setwake(struct irq_data *d, unsigned int on) { - int i; - unsigned long flags, new_mask; - - spin_lock_irqsave(&irq_lock, flags); - for (i = 0; i < 32; i++) - if (mask & (1 << i)) { - if (controller) - local_enable_irq(i + 32); - else - local_enable_irq(i); - } + int bit = d->irq - AU1000_INTC1_INT_BASE; + unsigned long wakemsk, flags; - if (controller) - new_mask = au_readl(IC1_MASKSET); + /* only GPIO 0-7 can act as wakeup source. Fortunately these + * are wired up identically on all supported variants. + */ + if ((bit < 0) || (bit > 7)) + return -EINVAL; + + local_irq_save(flags); + wakemsk = __raw_readl((void __iomem *)SYS_WAKEMSK); + if (on) + wakemsk |= 1 << bit; else - new_mask = au_readl(IC0_MASKSET); + wakemsk &= ~(1 << bit); + __raw_writel(wakemsk, (void __iomem *)SYS_WAKEMSK); + wmb(); + local_irq_restore(flags); - spin_unlock_irqrestore(&irq_lock, flags); + return 0; } - -static struct irq_chip rise_edge_irq_type = { - .name = "Au1000 Rise Edge", - .ack = mask_and_ack_rise_edge_irq, - .mask = local_disable_irq, - .mask_ack = mask_and_ack_rise_edge_irq, - .unmask = local_enable_irq, - .end = end_irq, -}; - -static struct irq_chip fall_edge_irq_type = { - .name = "Au1000 Fall Edge", - .ack = mask_and_ack_fall_edge_irq, - .mask = local_disable_irq, - .mask_ack = mask_and_ack_fall_edge_irq, - .unmask = local_enable_irq, - .end = end_irq, -}; - -static struct irq_chip either_edge_irq_type = { - .name = "Au1000 Rise or Fall Edge", - .ack = mask_and_ack_either_edge_irq, - .mask = local_disable_irq, - .mask_ack = mask_and_ack_either_edge_irq, - .unmask = local_enable_irq, - .end = end_irq, +/* + * irq_chips for both ICs; this way the mask handlers can be + * as short as possible. + */ +static struct irq_chip au1x_ic0_chip = { + .name = "Alchemy-IC0", + .irq_ack = au1x_ic0_ack, + .irq_mask = au1x_ic0_mask, + .irq_mask_ack = au1x_ic0_maskack, + .irq_unmask = au1x_ic0_unmask, + .irq_set_type = au1x_ic_settype, }; -static struct irq_chip level_irq_type = { - .name = "Au1000 Level", - .ack = mask_and_ack_level_irq, - .mask = local_disable_irq, - .mask_ack = mask_and_ack_level_irq, - .unmask = local_enable_irq, - .end = end_irq, +static struct irq_chip au1x_ic1_chip = { + .name = "Alchemy-IC1", + .irq_ack = au1x_ic1_ack, + .irq_mask = au1x_ic1_mask, + .irq_mask_ack = au1x_ic1_maskack, + .irq_unmask = au1x_ic1_unmask, + .irq_set_type = au1x_ic_settype, + .irq_set_wake = au1x_ic1_setwake, }; -static void __init setup_local_irq(unsigned int irq_nr, int type, int int_req) -{ - unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE; - - if (irq_nr > AU1000_MAX_INTR) - return; - - /* Config2[n], Config1[n], Config0[n] */ - if (bit >= 32) { - switch (type) { - case INTC_INT_RISE_EDGE: /* 0:0:1 */ - au_writel(1 << (bit - 32), IC1_CFG2CLR); - au_writel(1 << (bit - 32), IC1_CFG1CLR); - au_writel(1 << (bit - 32), IC1_CFG0SET); - set_irq_chip(irq_nr, &rise_edge_irq_type); - break; - case INTC_INT_FALL_EDGE: /* 0:1:0 */ - au_writel(1 << (bit - 32), IC1_CFG2CLR); - au_writel(1 << (bit - 32), IC1_CFG1SET); - au_writel(1 << (bit - 32), IC1_CFG0CLR); - set_irq_chip(irq_nr, &fall_edge_irq_type); - break; - case INTC_INT_RISE_AND_FALL_EDGE: /* 0:1:1 */ - au_writel(1 << (bit - 32), IC1_CFG2CLR); - au_writel(1 << (bit - 32), IC1_CFG1SET); - au_writel(1 << (bit - 32), IC1_CFG0SET); - set_irq_chip(irq_nr, &either_edge_irq_type); - break; - case INTC_INT_HIGH_LEVEL: /* 1:0:1 */ - au_writel(1 << (bit - 32), IC1_CFG2SET); - au_writel(1 << (bit - 32), IC1_CFG1CLR); - au_writel(1 << (bit - 32), IC1_CFG0SET); - set_irq_chip(irq_nr, &level_irq_type); - break; - case INTC_INT_LOW_LEVEL: /* 1:1:0 */ - au_writel(1 << (bit - 32), IC1_CFG2SET); - au_writel(1 << (bit - 32), IC1_CFG1SET); - au_writel(1 << (bit - 32), IC1_CFG0CLR); - set_irq_chip(irq_nr, &level_irq_type); - break; - case INTC_INT_DISABLED: /* 0:0:0 */ - au_writel(1 << (bit - 32), IC1_CFG0CLR); - au_writel(1 << (bit - 32), IC1_CFG1CLR); - au_writel(1 << (bit - 32), IC1_CFG2CLR); - break; - default: /* disable the interrupt */ - printk(KERN_WARNING "unexpected int type %d (irq %d)\n", - type, irq_nr); - au_writel(1 << (bit - 32), IC1_CFG0CLR); - au_writel(1 << (bit - 32), IC1_CFG1CLR); - au_writel(1 << (bit - 32), IC1_CFG2CLR); - return; - } - if (int_req) /* assign to interrupt request 1 */ - au_writel(1 << (bit - 32), IC1_ASSIGNCLR); - else /* assign to interrupt request 0 */ - au_writel(1 << (bit - 32), IC1_ASSIGNSET); - au_writel(1 << (bit - 32), IC1_SRCSET); - au_writel(1 << (bit - 32), IC1_MASKCLR); - au_writel(1 << (bit - 32), IC1_WAKECLR); +static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type) +{ + struct irq_chip *chip; + unsigned int bit, irq = d->irq; + irq_flow_handler_t handler = NULL; + unsigned char *name = NULL; + void __iomem *base; + int ret; + + if (irq >= AU1000_INTC1_INT_BASE) { + bit = irq - AU1000_INTC1_INT_BASE; + chip = &au1x_ic1_chip; + base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); } else { - switch (type) { - case INTC_INT_RISE_EDGE: /* 0:0:1 */ - au_writel(1 << bit, IC0_CFG2CLR); - au_writel(1 << bit, IC0_CFG1CLR); - au_writel(1 << bit, IC0_CFG0SET); - set_irq_chip(irq_nr, &rise_edge_irq_type); - break; - case INTC_INT_FALL_EDGE: /* 0:1:0 */ - au_writel(1 << bit, IC0_CFG2CLR); - au_writel(1 << bit, IC0_CFG1SET); - au_writel(1 << bit, IC0_CFG0CLR); - set_irq_chip(irq_nr, &fall_edge_irq_type); - break; - case INTC_INT_RISE_AND_FALL_EDGE: /* 0:1:1 */ - au_writel(1 << bit, IC0_CFG2CLR); - au_writel(1 << bit, IC0_CFG1SET); - au_writel(1 << bit, IC0_CFG0SET); - set_irq_chip(irq_nr, &either_edge_irq_type); - break; - case INTC_INT_HIGH_LEVEL: /* 1:0:1 */ - au_writel(1 << bit, IC0_CFG2SET); - au_writel(1 << bit, IC0_CFG1CLR); - au_writel(1 << bit, IC0_CFG0SET); - set_irq_chip(irq_nr, &level_irq_type); - break; - case INTC_INT_LOW_LEVEL: /* 1:1:0 */ - au_writel(1 << bit, IC0_CFG2SET); - au_writel(1 << bit, IC0_CFG1SET); - au_writel(1 << bit, IC0_CFG0CLR); - set_irq_chip(irq_nr, &level_irq_type); - break; - case INTC_INT_DISABLED: /* 0:0:0 */ - au_writel(1 << bit, IC0_CFG0CLR); - au_writel(1 << bit, IC0_CFG1CLR); - au_writel(1 << bit, IC0_CFG2CLR); - break; - default: /* disable the interrupt */ - printk(KERN_WARNING "unexpected int type %d (irq %d)\n", - type, irq_nr); - au_writel(1 << bit, IC0_CFG0CLR); - au_writel(1 << bit, IC0_CFG1CLR); - au_writel(1 << bit, IC0_CFG2CLR); - return; - } - if (int_req) /* assign to interrupt request 1 */ - au_writel(1 << bit, IC0_ASSIGNCLR); - else /* assign to interrupt request 0 */ - au_writel(1 << bit, IC0_ASSIGNSET); - au_writel(1 << bit, IC0_SRCSET); - au_writel(1 << bit, IC0_MASKCLR); - au_writel(1 << bit, IC0_WAKECLR); + bit = irq - AU1000_INTC0_INT_BASE; + chip = &au1x_ic0_chip; + base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); } - au_sync(); + + if (bit > 31) + return -EINVAL; + + ret = 0; + + switch (flow_type) { /* cfgregs 2:1:0 */ + case IRQ_TYPE_EDGE_RISING: /* 0:0:1 */ + __raw_writel(1 << bit, base + IC_CFG2CLR); + __raw_writel(1 << bit, base + IC_CFG1CLR); + __raw_writel(1 << bit, base + IC_CFG0SET); + handler = handle_edge_irq; + name = "riseedge"; + break; + case IRQ_TYPE_EDGE_FALLING: /* 0:1:0 */ + __raw_writel(1 << bit, base + IC_CFG2CLR); + __raw_writel(1 << bit, base + IC_CFG1SET); + __raw_writel(1 << bit, base + IC_CFG0CLR); + handler = handle_edge_irq; + name = "falledge"; + break; + case IRQ_TYPE_EDGE_BOTH: /* 0:1:1 */ + __raw_writel(1 << bit, base + IC_CFG2CLR); + __raw_writel(1 << bit, base + IC_CFG1SET); + __raw_writel(1 << bit, base + IC_CFG0SET); + handler = handle_edge_irq; + name = "bothedge"; + break; + case IRQ_TYPE_LEVEL_HIGH: /* 1:0:1 */ + __raw_writel(1 << bit, base + IC_CFG2SET); + __raw_writel(1 << bit, base + IC_CFG1CLR); + __raw_writel(1 << bit, base + IC_CFG0SET); + handler = handle_level_irq; + name = "hilevel"; + break; + case IRQ_TYPE_LEVEL_LOW: /* 1:1:0 */ + __raw_writel(1 << bit, base + IC_CFG2SET); + __raw_writel(1 << bit, base + IC_CFG1SET); + __raw_writel(1 << bit, base + IC_CFG0CLR); + handler = handle_level_irq; + name = "lowlevel"; + break; + case IRQ_TYPE_NONE: /* 0:0:0 */ + __raw_writel(1 << bit, base + IC_CFG2CLR); + __raw_writel(1 << bit, base + IC_CFG1CLR); + __raw_writel(1 << bit, base + IC_CFG0CLR); + break; + default: + ret = -EINVAL; + } + __irq_set_chip_handler_name_locked(d->irq, chip, handler, name); + + wmb(); + + return ret; } +/******************************************************************************/ + /* - * Interrupts are nested. Even if an interrupt handler is registered - * as "fast", we might get another interrupt before we return from - * intcX_reqX_irqdispatch(). + * au1300_gpic_chgcfg - change PIN configuration. + * @gpio: pin to change (0-based GPIO number from datasheet). + * @clr: clear all bits set in 'clr'. + * @set: set these bits. + * + * modifies a pins' configuration register, bits set in @clr will + * be cleared in the register, bits in @set will be set. */ +static inline void au1300_gpic_chgcfg(unsigned int gpio, + unsigned long clr, + unsigned long set) +{ + void __iomem *r = AU1300_GPIC_ADDR; + unsigned long l; + + r += gpio * 4; /* offset into pin config array */ + l = __raw_readl(r + AU1300_GPIC_PINCFG); + l &= ~clr; + l |= set; + __raw_writel(l, r + AU1300_GPIC_PINCFG); + wmb(); +} -static void intc0_req0_irqdispatch(void) +/* + * au1300_pinfunc_to_gpio - assign a pin as GPIO input (GPIO ctrl). + * @pin: pin (0-based GPIO number from datasheet). + * + * Assigns a GPIO pin to the GPIO controller, so its level can either + * be read or set through the generic GPIO functions. + * If you need a GPOUT, use au1300_gpio_set_value(pin, 0/1). + * REVISIT: is this function really necessary? + */ +void au1300_pinfunc_to_gpio(enum au1300_multifunc_pins gpio) { - static unsigned long intc0_req0; - unsigned int bit; + au1300_gpio_direction_input(gpio + AU1300_GPIO_BASE); +} +EXPORT_SYMBOL_GPL(au1300_pinfunc_to_gpio); - intc0_req0 |= au_readl(IC0_REQ0INT); +/* + * au1300_pinfunc_to_dev - assign a pin to the device function. + * @pin: pin (0-based GPIO number from datasheet). + * + * Assigns a GPIO pin to its associated device function; the pin will be + * driven by the device and not through GPIO functions. + */ +void au1300_pinfunc_to_dev(enum au1300_multifunc_pins gpio) +{ + void __iomem *r = AU1300_GPIC_ADDR; + unsigned long bit; - if (!intc0_req0) - return; + r += GPIC_GPIO_BANKOFF(gpio); + bit = GPIC_GPIO_TO_BIT(gpio); + __raw_writel(bit, r + AU1300_GPIC_DEVSEL); + wmb(); +} +EXPORT_SYMBOL_GPL(au1300_pinfunc_to_dev); -#ifdef AU1000_USB_DEV_REQ_INT - /* - * Because of the tight timing of SETUP token to reply - * transactions, the USB devices-side packet complete - * interrupt needs the highest priority. - */ - if ((intc0_req0 & (1 << AU1000_USB_DEV_REQ_INT))) { - intc0_req0 &= ~(1 << AU1000_USB_DEV_REQ_INT); - do_IRQ(AU1000_USB_DEV_REQ_INT); - return; +/* + * au1300_set_irq_priority - set internal priority of IRQ. + * @irq: irq to set priority (linux irq number). + * @p: priority (0 = highest, 3 = lowest). + */ +void au1300_set_irq_priority(unsigned int irq, int p) +{ + irq -= ALCHEMY_GPIC_INT_BASE; + au1300_gpic_chgcfg(irq, GPIC_CFG_IL_MASK, GPIC_CFG_IL_SET(p)); +} +EXPORT_SYMBOL_GPL(au1300_set_irq_priority); + +/* + * au1300_set_dbdma_gpio - assign a gpio to one of the DBDMA triggers. + * @dchan: dbdma trigger select (0, 1). + * @gpio: pin to assign as trigger. + * + * DBDMA controller has 2 external trigger sources; this function + * assigns a GPIO to the selected trigger. + */ +void au1300_set_dbdma_gpio(int dchan, unsigned int gpio) +{ + unsigned long r; + + if ((dchan >= 0) && (dchan <= 1)) { + r = __raw_readl(AU1300_GPIC_ADDR + AU1300_GPIC_DMASEL); + r &= ~(0xff << (8 * dchan)); + r |= (gpio & 0x7f) << (8 * dchan); + __raw_writel(r, AU1300_GPIC_ADDR + AU1300_GPIC_DMASEL); + wmb(); } -#endif - bit = __ffs(intc0_req0); - intc0_req0 &= ~(1 << bit); - do_IRQ(AU1000_INTC0_INT_BASE + bit); } +static inline void gpic_pin_set_idlewake(unsigned int gpio, int allow) +{ + au1300_gpic_chgcfg(gpio, GPIC_CFG_IDLEWAKE, + allow ? GPIC_CFG_IDLEWAKE : 0); +} -static void intc0_req1_irqdispatch(void) +static void au1300_gpic_mask(struct irq_data *d) { - static unsigned long intc0_req1; - unsigned int bit; + void __iomem *r = AU1300_GPIC_ADDR; + unsigned long bit, irq = d->irq; - intc0_req1 |= au_readl(IC0_REQ1INT); + irq -= ALCHEMY_GPIC_INT_BASE; + r += GPIC_GPIO_BANKOFF(irq); + bit = GPIC_GPIO_TO_BIT(irq); + __raw_writel(bit, r + AU1300_GPIC_IDIS); + wmb(); - if (!intc0_req1) - return; + gpic_pin_set_idlewake(irq, 0); +} - bit = __ffs(intc0_req1); - intc0_req1 &= ~(1 << bit); - do_IRQ(AU1000_INTC0_INT_BASE + bit); +static void au1300_gpic_unmask(struct irq_data *d) +{ + void __iomem *r = AU1300_GPIC_ADDR; + unsigned long bit, irq = d->irq; + + irq -= ALCHEMY_GPIC_INT_BASE; + + gpic_pin_set_idlewake(irq, 1); + + r += GPIC_GPIO_BANKOFF(irq); + bit = GPIC_GPIO_TO_BIT(irq); + __raw_writel(bit, r + AU1300_GPIC_IEN); + wmb(); } +static void au1300_gpic_maskack(struct irq_data *d) +{ + void __iomem *r = AU1300_GPIC_ADDR; + unsigned long bit, irq = d->irq; -/* - * Interrupt Controller 1: - * interrupts 32 - 63 - */ -static void intc1_req0_irqdispatch(void) + irq -= ALCHEMY_GPIC_INT_BASE; + r += GPIC_GPIO_BANKOFF(irq); + bit = GPIC_GPIO_TO_BIT(irq); + __raw_writel(bit, r + AU1300_GPIC_IPEND); /* ack */ + __raw_writel(bit, r + AU1300_GPIC_IDIS); /* mask */ + wmb(); + + gpic_pin_set_idlewake(irq, 0); +} + +static void au1300_gpic_ack(struct irq_data *d) { - static unsigned long intc1_req0; - unsigned int bit; + void __iomem *r = AU1300_GPIC_ADDR; + unsigned long bit, irq = d->irq; + + irq -= ALCHEMY_GPIC_INT_BASE; + r += GPIC_GPIO_BANKOFF(irq); + bit = GPIC_GPIO_TO_BIT(irq); + __raw_writel(bit, r + AU1300_GPIC_IPEND); /* ack */ + wmb(); +} - intc1_req0 |= au_readl(IC1_REQ0INT); +static struct irq_chip au1300_gpic = { + .name = "GPIOINT", + .irq_ack = au1300_gpic_ack, + .irq_mask = au1300_gpic_mask, + .irq_mask_ack = au1300_gpic_maskack, + .irq_unmask = au1300_gpic_unmask, + .irq_set_type = au1300_gpic_settype, +}; - if (!intc1_req0) - return; +static int au1300_gpic_settype(struct irq_data *d, unsigned int type) +{ + unsigned long s; + unsigned char *name = NULL; + irq_flow_handler_t hdl = NULL; + + switch (type) { + case IRQ_TYPE_LEVEL_HIGH: + s = GPIC_CFG_IC_LEVEL_HIGH; + name = "high"; + hdl = handle_level_irq; + break; + case IRQ_TYPE_LEVEL_LOW: + s = GPIC_CFG_IC_LEVEL_LOW; + name = "low"; + hdl = handle_level_irq; + break; + case IRQ_TYPE_EDGE_RISING: + s = GPIC_CFG_IC_EDGE_RISE; + name = "posedge"; + hdl = handle_edge_irq; + break; + case IRQ_TYPE_EDGE_FALLING: + s = GPIC_CFG_IC_EDGE_FALL; + name = "negedge"; + hdl = handle_edge_irq; + break; + case IRQ_TYPE_EDGE_BOTH: + s = GPIC_CFG_IC_EDGE_BOTH; + name = "bothedge"; + hdl = handle_edge_irq; + break; + case IRQ_TYPE_NONE: + s = GPIC_CFG_IC_OFF; + name = "disabled"; + hdl = handle_level_irq; + break; + default: + return -EINVAL; + } + + __irq_set_chip_handler_name_locked(d->irq, &au1300_gpic, hdl, name); - bit = __ffs(intc1_req0); - intc1_req0 &= ~(1 << bit); - do_IRQ(AU1000_INTC1_INT_BASE + bit); + au1300_gpic_chgcfg(d->irq - ALCHEMY_GPIC_INT_BASE, GPIC_CFG_IC_MASK, s); + + return 0; } +/******************************************************************************/ -static void intc1_req1_irqdispatch(void) +static inline void ic_init(void __iomem *base) { - static unsigned long intc1_req1; - unsigned int bit; + /* initialize interrupt controller to a safe state */ + __raw_writel(0xffffffff, base + IC_CFG0CLR); + __raw_writel(0xffffffff, base + IC_CFG1CLR); + __raw_writel(0xffffffff, base + IC_CFG2CLR); + __raw_writel(0xffffffff, base + IC_MASKCLR); + __raw_writel(0xffffffff, base + IC_ASSIGNCLR); + __raw_writel(0xffffffff, base + IC_WAKECLR); + __raw_writel(0xffffffff, base + IC_SRCSET); + __raw_writel(0xffffffff, base + IC_FALLINGCLR); + __raw_writel(0xffffffff, base + IC_RISINGCLR); + __raw_writel(0x00000000, base + IC_TESTBIT); + wmb(); +} - intc1_req1 |= au_readl(IC1_REQ1INT); +static unsigned long alchemy_gpic_pmdata[ALCHEMY_GPIC_INT_NUM + 6]; - if (!intc1_req1) - return; +static inline void alchemy_ic_suspend_one(void __iomem *base, unsigned long *d) +{ + d[0] = __raw_readl(base + IC_CFG0RD); + d[1] = __raw_readl(base + IC_CFG1RD); + d[2] = __raw_readl(base + IC_CFG2RD); + d[3] = __raw_readl(base + IC_SRCRD); + d[4] = __raw_readl(base + IC_ASSIGNRD); + d[5] = __raw_readl(base + IC_WAKERD); + d[6] = __raw_readl(base + IC_MASKRD); + ic_init(base); /* shut it up too while at it */ +} - bit = __ffs(intc1_req1); - intc1_req1 &= ~(1 << bit); - do_IRQ(AU1000_INTC1_INT_BASE + bit); +static inline void alchemy_ic_resume_one(void __iomem *base, unsigned long *d) +{ + ic_init(base); + + __raw_writel(d[0], base + IC_CFG0SET); + __raw_writel(d[1], base + IC_CFG1SET); + __raw_writel(d[2], base + IC_CFG2SET); + __raw_writel(d[3], base + IC_SRCSET); + __raw_writel(d[4], base + IC_ASSIGNSET); + __raw_writel(d[5], base + IC_WAKESET); + wmb(); + + __raw_writel(d[6], base + IC_MASKSET); + wmb(); } -asmlinkage void plat_irq_dispatch(void) +static int alchemy_ic_suspend(void) { - unsigned int pending = read_c0_status() & read_c0_cause(); - - if (pending & CAUSEF_IP7) - do_IRQ(MIPS_CPU_IRQ_BASE + 7); - else if (pending & CAUSEF_IP2) - intc0_req0_irqdispatch(); - else if (pending & CAUSEF_IP3) - intc0_req1_irqdispatch(); - else if (pending & CAUSEF_IP4) - intc1_req0_irqdispatch(); - else if (pending & CAUSEF_IP5) - intc1_req1_irqdispatch(); - else - spurious_interrupt(); + alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR), + alchemy_gpic_pmdata); + alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR), + &alchemy_gpic_pmdata[7]); + return 0; } -void __init arch_init_irq(void) +static void alchemy_ic_resume(void) { + alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR), + &alchemy_gpic_pmdata[7]); + alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR), + alchemy_gpic_pmdata); +} + +static int alchemy_gpic_suspend(void) +{ + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR); int i; - struct au1xxx_irqmap *imp; - extern struct au1xxx_irqmap au1xxx_irq_map[]; - extern struct au1xxx_irqmap au1xxx_ic0_map[]; - extern int au1xxx_nr_irqs; - extern int au1xxx_ic0_nr_irqs; - /* - * Initialize interrupt controllers to a safe state. - */ - au_writel(0xffffffff, IC0_CFG0CLR); - au_writel(0xffffffff, IC0_CFG1CLR); - au_writel(0xffffffff, IC0_CFG2CLR); - au_writel(0xffffffff, IC0_MASKCLR); - au_writel(0xffffffff, IC0_ASSIGNSET); - au_writel(0xffffffff, IC0_WAKECLR); - au_writel(0xffffffff, IC0_SRCSET); - au_writel(0xffffffff, IC0_FALLINGCLR); - au_writel(0xffffffff, IC0_RISINGCLR); - au_writel(0x00000000, IC0_TESTBIT); - - au_writel(0xffffffff, IC1_CFG0CLR); - au_writel(0xffffffff, IC1_CFG1CLR); - au_writel(0xffffffff, IC1_CFG2CLR); - au_writel(0xffffffff, IC1_MASKCLR); - au_writel(0xffffffff, IC1_ASSIGNSET); - au_writel(0xffffffff, IC1_WAKECLR); - au_writel(0xffffffff, IC1_SRCSET); - au_writel(0xffffffff, IC1_FALLINGCLR); - au_writel(0xffffffff, IC1_RISINGCLR); - au_writel(0x00000000, IC1_TESTBIT); + /* save 4 interrupt mask status registers */ + alchemy_gpic_pmdata[0] = __raw_readl(base + AU1300_GPIC_IEN + 0x0); + alchemy_gpic_pmdata[1] = __raw_readl(base + AU1300_GPIC_IEN + 0x4); + alchemy_gpic_pmdata[2] = __raw_readl(base + AU1300_GPIC_IEN + 0x8); + alchemy_gpic_pmdata[3] = __raw_readl(base + AU1300_GPIC_IEN + 0xc); + + /* save misc register(s) */ + alchemy_gpic_pmdata[4] = __raw_readl(base + AU1300_GPIC_DMASEL); + + /* molto silenzioso */ + __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x0); + __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x4); + __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x8); + __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0xc); + wmb(); + + /* save pin/int-type configuration */ + base += AU1300_GPIC_PINCFG; + for (i = 0; i < ALCHEMY_GPIC_INT_NUM; i++) + alchemy_gpic_pmdata[i + 5] = __raw_readl(base + (i << 2)); + + wmb(); + + return 0; +} + +static void alchemy_gpic_resume(void) +{ + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR); + int i; + + /* disable all first */ + __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x0); + __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x4); + __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x8); + __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0xc); + wmb(); + + /* restore pin/int-type configurations */ + base += AU1300_GPIC_PINCFG; + for (i = 0; i < ALCHEMY_GPIC_INT_NUM; i++) + __raw_writel(alchemy_gpic_pmdata[i + 5], base + (i << 2)); + wmb(); + + /* restore misc register(s) */ + base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR); + __raw_writel(alchemy_gpic_pmdata[4], base + AU1300_GPIC_DMASEL); + wmb(); + + /* finally restore masks */ + __raw_writel(alchemy_gpic_pmdata[0], base + AU1300_GPIC_IEN + 0x0); + __raw_writel(alchemy_gpic_pmdata[1], base + AU1300_GPIC_IEN + 0x4); + __raw_writel(alchemy_gpic_pmdata[2], base + AU1300_GPIC_IEN + 0x8); + __raw_writel(alchemy_gpic_pmdata[3], base + AU1300_GPIC_IEN + 0xc); + wmb(); +} + +static struct syscore_ops alchemy_ic_pmops = { + .suspend = alchemy_ic_suspend, + .resume = alchemy_ic_resume, +}; + +static struct syscore_ops alchemy_gpic_pmops = { + .suspend = alchemy_gpic_suspend, + .resume = alchemy_gpic_resume, +}; + +/******************************************************************************/ + +/* create chained handlers for the 4 IC requests to the MIPS IRQ ctrl */ +#define DISP(name, base, addr) \ +static void au1000_##name##_dispatch(unsigned int irq, struct irq_desc *d) \ +{ \ + unsigned long r = __raw_readl((void __iomem *)KSEG1ADDR(addr)); \ + if (likely(r)) \ + generic_handle_irq(base + __ffs(r)); \ + else \ + spurious_interrupt(); \ +} + +DISP(ic0r0, AU1000_INTC0_INT_BASE, AU1000_IC0_PHYS_ADDR + IC_REQ0INT) +DISP(ic0r1, AU1000_INTC0_INT_BASE, AU1000_IC0_PHYS_ADDR + IC_REQ1INT) +DISP(ic1r0, AU1000_INTC1_INT_BASE, AU1000_IC1_PHYS_ADDR + IC_REQ0INT) +DISP(ic1r1, AU1000_INTC1_INT_BASE, AU1000_IC1_PHYS_ADDR + IC_REQ1INT) + +static void alchemy_gpic_dispatch(unsigned int irq, struct irq_desc *d) +{ + int i = __raw_readl(AU1300_GPIC_ADDR + AU1300_GPIC_PRIENC); + generic_handle_irq(ALCHEMY_GPIC_INT_BASE + i); +} +/******************************************************************************/ + +static void __init au1000_init_irq(struct alchemy_irqmap *map) +{ + unsigned int bit, irq_nr; + void __iomem *base; + + ic_init((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR)); + ic_init((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR)); + register_syscore_ops(&alchemy_ic_pmops); mips_cpu_irq_init(); + /* register all 64 possible IC0+IC1 irq sources as type "none". + * Use set_irq_type() to set edge/level behaviour at runtime. + */ + for (irq_nr = AU1000_INTC0_INT_BASE; + (irq_nr < AU1000_INTC0_INT_BASE + 32); irq_nr++) + au1x_ic_settype(irq_get_irq_data(irq_nr), IRQ_TYPE_NONE); + + for (irq_nr = AU1000_INTC1_INT_BASE; + (irq_nr < AU1000_INTC1_INT_BASE + 32); irq_nr++) + au1x_ic_settype(irq_get_irq_data(irq_nr), IRQ_TYPE_NONE); + /* * Initialize IC0, which is fixed per processor. */ - imp = au1xxx_ic0_map; - for (i = 0; i < au1xxx_ic0_nr_irqs; i++) { - setup_local_irq(imp->im_irq, imp->im_type, imp->im_request); - imp++; + while (map->irq != -1) { + irq_nr = map->irq; + + if (irq_nr >= AU1000_INTC1_INT_BASE) { + bit = irq_nr - AU1000_INTC1_INT_BASE; + base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); + } else { + bit = irq_nr - AU1000_INTC0_INT_BASE; + base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); + } + if (map->prio == 0) + __raw_writel(1 << bit, base + IC_ASSIGNSET); + + au1x_ic_settype(irq_get_irq_data(irq_nr), map->type); + ++map; } - /* - * Now set up the irq mapping for the board. - */ - imp = au1xxx_irq_map; - for (i = 0; i < au1xxx_nr_irqs; i++) { - setup_local_irq(imp->im_irq, imp->im_type, imp->im_request); - imp++; + irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 2, au1000_ic0r0_dispatch); + irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 3, au1000_ic0r1_dispatch); + irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 4, au1000_ic1r0_dispatch); + irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 5, au1000_ic1r1_dispatch); +} + +static void __init alchemy_gpic_init_irq(const struct alchemy_irqmap *dints) +{ + int i; + void __iomem *bank_base; + + register_syscore_ops(&alchemy_gpic_pmops); + mips_cpu_irq_init(); + + /* disable & ack all possible interrupt sources */ + for (i = 0; i < 4; i++) { + bank_base = AU1300_GPIC_ADDR + (i * 4); + __raw_writel(~0UL, bank_base + AU1300_GPIC_IDIS); + wmb(); + __raw_writel(~0UL, bank_base + AU1300_GPIC_IPEND); + wmb(); } - set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4); + /* register an irq_chip for them, with 2nd highest priority */ + for (i = ALCHEMY_GPIC_INT_BASE; i <= ALCHEMY_GPIC_INT_LAST; i++) { + au1300_set_irq_priority(i, 1); + au1300_gpic_settype(irq_get_irq_data(i), IRQ_TYPE_NONE); + } + + /* setup known on-chip sources */ + while ((i = dints->irq) != -1) { + au1300_gpic_settype(irq_get_irq_data(i), dints->type); + au1300_set_irq_priority(i, dints->prio); + + if (dints->internal) + au1300_pinfunc_to_dev(i - ALCHEMY_GPIC_INT_BASE); + + dints++; + } - /* Board specific IRQ initialization. - */ - if (board_init_irq) - board_init_irq(); + irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 2, alchemy_gpic_dispatch); + irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 3, alchemy_gpic_dispatch); + irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 4, alchemy_gpic_dispatch); + irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 5, alchemy_gpic_dispatch); +} + +/******************************************************************************/ + +void __init arch_init_irq(void) +{ + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1000: + au1000_init_irq(au1000_irqmap); + break; + case ALCHEMY_CPU_AU1500: + au1000_init_irq(au1500_irqmap); + break; + case ALCHEMY_CPU_AU1100: + au1000_init_irq(au1100_irqmap); + break; + case ALCHEMY_CPU_AU1550: + au1000_init_irq(au1550_irqmap); + break; + case ALCHEMY_CPU_AU1200: + au1000_init_irq(au1200_irqmap); + break; + case ALCHEMY_CPU_AU1300: + alchemy_gpic_init_irq(au1300_irqmap); + break; + default: + pr_err("unknown Alchemy IRQ core\n"); + break; + } +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned long r = (read_c0_status() & read_c0_cause()) >> 8; + do_IRQ(MIPS_CPU_IRQ_BASE + __ffs(r & 0xff)); } |