diff options
Diffstat (limited to 'arch/microblaze')
136 files changed, 2253 insertions, 3162 deletions
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index 0bf44231aaf..9ae08541e30 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -1,28 +1,38 @@ config MICROBLAZE def_bool y - select HAVE_MEMBLOCK - select HAVE_MEMBLOCK_NODE_MAP - select HAVE_FUNCTION_TRACER - select HAVE_FUNCTION_TRACE_MCOUNT_TEST - select HAVE_FUNCTION_GRAPH_TRACER - select HAVE_DYNAMIC_FTRACE - select HAVE_FTRACE_MCOUNT_RECORD + select ARCH_MIGHT_HAVE_PC_PARPORT + select ARCH_WANT_IPC_PARSE_VERSION select ARCH_WANT_OPTIONAL_GPIOLIB - select HAVE_OPROFILE + select BUILDTIME_EXTABLE_SORT + select CLKSRC_OF + select CLONE_BACKWARDS3 + select COMMON_CLK + select GENERIC_ATOMIC64 + select GENERIC_CLOCKEVENTS + select GENERIC_CPU_DEVICES + select GENERIC_IDLE_POLL_SETUP + select GENERIC_IRQ_PROBE + select GENERIC_IRQ_SHOW + select GENERIC_PCI_IOMAP + select GENERIC_SCHED_CLOCK select HAVE_ARCH_KGDB - select HAVE_DMA_ATTRS + select HAVE_DEBUG_KMEMLEAK select HAVE_DMA_API_DEBUG - select TRACING_SUPPORT + select HAVE_DMA_ATTRS + select HAVE_DYNAMIC_FTRACE + select HAVE_FTRACE_MCOUNT_RECORD + select HAVE_FUNCTION_GRAPH_TRACER + select HAVE_FUNCTION_TRACE_MCOUNT_TEST + select HAVE_FUNCTION_TRACER + select HAVE_MEMBLOCK + select HAVE_MEMBLOCK_NODE_MAP + select HAVE_OPROFILE + select IRQ_DOMAIN + select MODULES_USE_ELF_RELA select OF select OF_EARLY_FLATTREE - select IRQ_DOMAIN - select HAVE_GENERIC_HARDIRQS - select GENERIC_IRQ_PROBE - select GENERIC_IRQ_SHOW - select GENERIC_PCI_IOMAP - select GENERIC_CPU_DEVICES - select GENERIC_ATOMIC64 - select GENERIC_CLOCKEVENTS + select TRACING_SUPPORT + select VIRT_TO_BUS config SWAP def_bool n @@ -33,9 +43,6 @@ config RWSEM_GENERIC_SPINLOCK config ZONE_DMA def_bool y -config ARCH_POPULATES_NODE_MAP - def_bool y - config RWSEM_XCHGADD_ALGORITHM bool @@ -51,9 +58,6 @@ config GENERIC_HWEIGHT config GENERIC_CALIBRATE_DELAY def_bool y -config GENERIC_GPIO - bool - config GENERIC_CSUM def_bool y @@ -70,7 +74,7 @@ source "init/Kconfig" source "kernel/Kconfig.freezer" -source "arch/microblaze/platform/Kconfig.platform" +source "arch/microblaze/Kconfig.platform" menu "Processor type and features" @@ -82,11 +86,6 @@ config MMU bool "MMU support" default n -config NO_MMU - bool - depends on !MMU - default y - comment "Boot options" config CMDLINE_BOOL @@ -242,21 +241,14 @@ choice config MICROBLAZE_4K_PAGES bool "4k page size" -config MICROBLAZE_8K_PAGES - bool "8k page size" - config MICROBLAZE_16K_PAGES bool "16k page size" -config MICROBLAZE_32K_PAGES - bool "32k page size" +config MICROBLAZE_64K_PAGES + bool "64k page size" endchoice -config KERNEL_PAD - hex "Kernel PAD for unpacking" if ADVANCED_OPTIONS - default "0x80000" if MMU - endmenu source "mm/Kconfig" diff --git a/arch/microblaze/platform/Kconfig.platform b/arch/microblaze/Kconfig.platform index 669c7eec293..1b3d8c84910 100644 --- a/arch/microblaze/platform/Kconfig.platform +++ b/arch/microblaze/Kconfig.platform @@ -5,40 +5,6 @@ # menu "Platform options" -choice - prompt "Platform" - default PLATFORM_MICROBLAZE_AUTO - help - Choose which hardware board/platform you are targeting. - -config PLATFORM_GENERIC - bool "Generic" - help - Choose this option for the Generic platform. - -endchoice - -config SELFMOD - bool "Use self modified code for intc/timer" - depends on EXPERIMENTAL && NO_MMU - default n - help - This choice enables self-modified code for interrupt controller - and timer. - -config SELFMOD_INTC - bool "Use self modified code for intc" - depends on SELFMOD - default y - help - This choice enables self-modified code for interrupt controller. - -config SELFMOD_TIMER - bool "Use self modified code for timer" - depends on SELFMOD - default y - help - This choice enables self-modified code for timer. config OPT_LIB_FUNCTION bool "Optimalized lib function" @@ -59,8 +25,45 @@ config OPT_LIB_ASM Allows turn on optimalized library function (memcpy and memmove). Function are written in asm code. -if PLATFORM_GENERIC=y - source "arch/microblaze/platform/generic/Kconfig.auto" -endif +# Definitions for MICROBLAZE0 +comment "Definitions for MICROBLAZE0" + +config KERNEL_BASE_ADDR + hex "Physical address where Linux Kernel is" + default "0x90000000" + help + BASE Address for kernel + +config XILINX_MICROBLAZE0_FAMILY + string "Targeted FPGA family" + default "virtex5" + +config XILINX_MICROBLAZE0_USE_MSR_INSTR + int "USE_MSR_INSTR range (0:1)" + default 0 + +config XILINX_MICROBLAZE0_USE_PCMP_INSTR + int "USE_PCMP_INSTR range (0:1)" + default 0 + +config XILINX_MICROBLAZE0_USE_BARREL + int "USE_BARREL range (0:1)" + default 0 + +config XILINX_MICROBLAZE0_USE_DIV + int "USE_DIV range (0:1)" + default 0 + +config XILINX_MICROBLAZE0_USE_HW_MUL + int "USE_HW_MUL values (0=NONE, 1=MUL32, 2=MUL64)" + default 0 + +config XILINX_MICROBLAZE0_USE_FPU + int "USE_FPU values (0=NONE, 1=BASIC, 2=EXTENDED)" + default 0 + +config XILINX_MICROBLAZE0_HW_VER + string "Core version number" + default 7.10.d endmenu diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile index b23c40eb7a5..740f2b82a18 100644 --- a/arch/microblaze/Makefile +++ b/arch/microblaze/Makefile @@ -1,3 +1,5 @@ +KBUILD_DEFCONFIG := mmu_defconfig + ifeq ($(CONFIG_MMU),y) UTS_SYSNAME = -DUTS_SYSNAME=\"Linux\" else @@ -46,7 +48,6 @@ head-y := arch/microblaze/kernel/head.o libs-y += arch/microblaze/lib/ core-y += arch/microblaze/kernel/ core-y += arch/microblaze/mm/ -core-y += arch/microblaze/platform/ core-$(CONFIG_PCI) += arch/microblaze/pci/ drivers-$(CONFIG_OPROFILE) += arch/microblaze/oprofile/ @@ -57,7 +58,7 @@ boot := arch/microblaze/boot DTB:=$(subst simpleImage.,,$(filter simpleImage.%, $(MAKECMDGOALS))) ifneq ($(DTB),) - core-y += $(boot)/ + core-y += $(boot)/dts/ endif # defines filename extension depending memory management type @@ -69,21 +70,19 @@ export MMU DTB all: linux.bin -# With make 3.82 we cannot mix normal and wildcard targets -BOOT_TARGETS1 = linux.bin linux.bin.gz -BOOT_TARGETS2 = simpleImage.% - archclean: $(Q)$(MAKE) $(clean)=$(boot) -$(BOOT_TARGETS1): vmlinux +linux.bin linux.bin.gz linux.bin.ub: vmlinux $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ -$(BOOT_TARGETS2): vmlinux + +simpleImage.%: vmlinux $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ define archhelp echo '* linux.bin - Create raw binary' echo ' linux.bin.gz - Create compressed raw binary' + echo ' linux.bin.ub - Create U-Boot wrapped raw binary' echo ' simpleImage.<dt> - ELF image with $(arch)/boot/dts/<dt>.dts linked in' echo ' - stripped elf with fdt blob' echo ' simpleImage.<dt>.unstrip - full ELF image with fdt blob' diff --git a/arch/microblaze/boot/.gitignore b/arch/microblaze/boot/.gitignore new file mode 100644 index 00000000000..bf045918602 --- /dev/null +++ b/arch/microblaze/boot/.gitignore @@ -0,0 +1,3 @@ +*.dtb +linux.bin* +simpleImage.* diff --git a/arch/microblaze/boot/Makefile b/arch/microblaze/boot/Makefile index fa83ea497db..8e211cc28da 100644 --- a/arch/microblaze/boot/Makefile +++ b/arch/microblaze/boot/Makefile @@ -2,23 +2,15 @@ # arch/microblaze/boot/Makefile # -obj-y += linked_dtb.o - -targets := linux.bin linux.bin.gz simpleImage.% +targets := linux.bin linux.bin.gz linux.bin.ub simpleImage.% OBJCOPYFLAGS := -R .note -R .comment -R .note.gnu.build-id -O binary -# Ensure system.dtb exists -$(obj)/linked_dtb.o: $(obj)/system.dtb - -# Generate system.dtb from $(DTB).dtb -ifneq ($(DTB),system) -$(obj)/system.dtb: $(obj)/$(DTB).dtb - $(call if_changed,cp) -endif - $(obj)/linux.bin: vmlinux FORCE $(call if_changed,objcopy) + @echo 'Kernel: $@ is ready' ' (#'`cat .version`')' + +$(obj)/linux.bin.ub: $(obj)/linux.bin FORCE $(call if_changed,uimage) @echo 'Kernel: $@ is ready' ' (#'`cat .version`')' @@ -33,8 +25,6 @@ quiet_cmd_strip = STRIP $@ cmd_strip = $(STRIP) -K microblaze_start -K _end -K __log_buf \ -K _fdt_start vmlinux -o $@ -UIMAGE_IN = $@ -UIMAGE_OUT = $@.ub UIMAGE_LOADADDR = $(CONFIG_KERNEL_BASE_ADDR) $(obj)/simpleImage.%: vmlinux FORCE @@ -45,10 +35,4 @@ $(obj)/simpleImage.%: vmlinux FORCE @echo 'Kernel: $@ is ready' ' (#'`cat .version`')' -# Rule to build device tree blobs -DTC_FLAGS := -p 1024 - -$(obj)/%.dtb: $(src)/dts/%.dts FORCE - $(call if_changed_dep,dtc) - -clean-files += *.dtb simpleImage.*.unstrip linux.bin.ub +clean-files += simpleImage.*.unstrip linux.bin.ub diff --git a/arch/microblaze/boot/dts/Makefile b/arch/microblaze/boot/dts/Makefile new file mode 100644 index 00000000000..c4982d16e55 --- /dev/null +++ b/arch/microblaze/boot/dts/Makefile @@ -0,0 +1,20 @@ +# + +obj-y += linked_dtb.o + +# Ensure system.dtb exists +$(obj)/linked_dtb.o: $(obj)/system.dtb + +# Generate system.dtb from $(DTB).dtb +ifneq ($(DTB),system) +$(obj)/system.dtb: $(obj)/$(DTB).dtb + $(call if_changed,cp) +endif + +quiet_cmd_cp = CP $< $@$2 + cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false) + +# Rule to build device tree blobs +DTC_FLAGS := -p 1024 + +clean-files += *.dtb diff --git a/arch/microblaze/boot/dts/linked_dtb.S b/arch/microblaze/boot/dts/linked_dtb.S new file mode 100644 index 00000000000..23345af3721 --- /dev/null +++ b/arch/microblaze/boot/dts/linked_dtb.S @@ -0,0 +1,2 @@ +.section __fdt_blob,"a" +.incbin "arch/microblaze/boot/dts/system.dtb" diff --git a/arch/microblaze/boot/dts/system.dts b/arch/microblaze/boot/dts/system.dts index 7cb657892f2..b620da23feb 120000..100644 --- a/arch/microblaze/boot/dts/system.dts +++ b/arch/microblaze/boot/dts/system.dts @@ -1 +1,366 @@ -../../platform/generic/system.dts
\ No newline at end of file +/* + * Device Tree Generator version: 1.1 + * + * (C) Copyright 2007-2008 Xilinx, Inc. + * (C) Copyright 2007-2009 Michal Simek + * + * Michal SIMEK <monstr@monstr.eu> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * CAUTION: This file is automatically generated by libgen. + * Version: Xilinx EDK 10.1.03 EDK_K_SP3.6 + * + * XPS project directory: Xilinx-ML505-ll_temac-sgdma-MMU-FDT-edk101 + */ + +/dts-v1/; +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xlnx,microblaze"; + hard-reset-gpios = <&LEDs_8Bit 2 1>; + model = "testing"; + DDR2_SDRAM: memory@90000000 { + device_type = "memory"; + reg = < 0x90000000 0x10000000 >; + } ; + aliases { + ethernet0 = &Hard_Ethernet_MAC; + serial0 = &RS232_Uart_1; + } ; + chosen { + bootargs = "console=ttyUL0,115200 highres=on"; + linux,stdout-path = "/plb@0/serial@84000000"; + } ; + cpus { + #address-cells = <1>; + #cpus = <0x1>; + #size-cells = <0>; + microblaze_0: cpu@0 { + clock-frequency = <125000000>; + compatible = "xlnx,microblaze-7.10.d"; + d-cache-baseaddr = <0x90000000>; + d-cache-highaddr = <0x9fffffff>; + d-cache-line-size = <0x10>; + d-cache-size = <0x2000>; + device_type = "cpu"; + i-cache-baseaddr = <0x90000000>; + i-cache-highaddr = <0x9fffffff>; + i-cache-line-size = <0x10>; + i-cache-size = <0x2000>; + model = "microblaze,7.10.d"; + reg = <0>; + timebase-frequency = <125000000>; + xlnx,addr-tag-bits = <0xf>; + xlnx,allow-dcache-wr = <0x1>; + xlnx,allow-icache-wr = <0x1>; + xlnx,area-optimized = <0x0>; + xlnx,cache-byte-size = <0x2000>; + xlnx,d-lmb = <0x1>; + xlnx,d-opb = <0x0>; + xlnx,d-plb = <0x1>; + xlnx,data-size = <0x20>; + xlnx,dcache-addr-tag = <0xf>; + xlnx,dcache-always-used = <0x1>; + xlnx,dcache-byte-size = <0x2000>; + xlnx,dcache-line-len = <0x4>; + xlnx,dcache-use-fsl = <0x1>; + xlnx,debug-enabled = <0x1>; + xlnx,div-zero-exception = <0x1>; + xlnx,dopb-bus-exception = <0x0>; + xlnx,dynamic-bus-sizing = <0x1>; + xlnx,edge-is-positive = <0x1>; + xlnx,family = "virtex5"; + xlnx,endianness = <0x1>; + xlnx,fpu-exception = <0x1>; + xlnx,fsl-data-size = <0x20>; + xlnx,fsl-exception = <0x0>; + xlnx,fsl-links = <0x0>; + xlnx,i-lmb = <0x1>; + xlnx,i-opb = <0x0>; + xlnx,i-plb = <0x1>; + xlnx,icache-always-used = <0x1>; + xlnx,icache-line-len = <0x4>; + xlnx,icache-use-fsl = <0x1>; + xlnx,ill-opcode-exception = <0x1>; + xlnx,instance = "microblaze_0"; + xlnx,interconnect = <0x1>; + xlnx,interrupt-is-edge = <0x0>; + xlnx,iopb-bus-exception = <0x0>; + xlnx,mmu-dtlb-size = <0x4>; + xlnx,mmu-itlb-size = <0x2>; + xlnx,mmu-tlb-access = <0x3>; + xlnx,mmu-zones = <0x10>; + xlnx,number-of-pc-brk = <0x1>; + xlnx,number-of-rd-addr-brk = <0x0>; + xlnx,number-of-wr-addr-brk = <0x0>; + xlnx,opcode-0x0-illegal = <0x1>; + xlnx,pvr = <0x2>; + xlnx,pvr-user1 = <0x0>; + xlnx,pvr-user2 = <0x0>; + xlnx,reset-msr = <0x0>; + xlnx,sco = <0x0>; + xlnx,unaligned-exceptions = <0x1>; + xlnx,use-barrel = <0x1>; + xlnx,use-dcache = <0x1>; + xlnx,use-div = <0x1>; + xlnx,use-ext-brk = <0x1>; + xlnx,use-ext-nm-brk = <0x1>; + xlnx,use-extended-fsl-instr = <0x0>; + xlnx,use-fpu = <0x2>; + xlnx,use-hw-mul = <0x2>; + xlnx,use-icache = <0x1>; + xlnx,use-interrupt = <0x1>; + xlnx,use-mmu = <0x3>; + xlnx,use-msr-instr = <0x1>; + xlnx,use-pcmp-instr = <0x1>; + } ; + } ; + mb_plb: plb@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xlnx,plb-v46-1.03.a", "xlnx,plb-v46-1.00.a", "simple-bus"; + ranges ; + FLASH: flash@a0000000 { + bank-width = <2>; + compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash"; + reg = < 0xa0000000 0x2000000 >; + xlnx,family = "virtex5"; + xlnx,include-datawidth-matching-0 = <0x1>; + xlnx,include-datawidth-matching-1 = <0x0>; + xlnx,include-datawidth-matching-2 = <0x0>; + xlnx,include-datawidth-matching-3 = <0x0>; + xlnx,include-negedge-ioregs = <0x0>; + xlnx,include-plb-ipif = <0x1>; + xlnx,include-wrbuf = <0x1>; + xlnx,max-mem-width = <0x10>; + xlnx,mch-native-dwidth = <0x20>; + xlnx,mch-plb-clk-period-ps = <0x1f40>; + xlnx,mch-splb-awidth = <0x20>; + xlnx,mch0-accessbuf-depth = <0x10>; + xlnx,mch0-protocol = <0x0>; + xlnx,mch0-rddatabuf-depth = <0x10>; + xlnx,mch1-accessbuf-depth = <0x10>; + xlnx,mch1-protocol = <0x0>; + xlnx,mch1-rddatabuf-depth = <0x10>; + xlnx,mch2-accessbuf-depth = <0x10>; + xlnx,mch2-protocol = <0x0>; + xlnx,mch2-rddatabuf-depth = <0x10>; + xlnx,mch3-accessbuf-depth = <0x10>; + xlnx,mch3-protocol = <0x0>; + xlnx,mch3-rddatabuf-depth = <0x10>; + xlnx,mem0-width = <0x10>; + xlnx,mem1-width = <0x20>; + xlnx,mem2-width = <0x20>; + xlnx,mem3-width = <0x20>; + xlnx,num-banks-mem = <0x1>; + xlnx,num-channels = <0x0>; + xlnx,priority-mode = <0x0>; + xlnx,synch-mem-0 = <0x0>; + xlnx,synch-mem-1 = <0x0>; + xlnx,synch-mem-2 = <0x0>; + xlnx,synch-mem-3 = <0x0>; + xlnx,synch-pipedelay-0 = <0x2>; + xlnx,synch-pipedelay-1 = <0x2>; + xlnx,synch-pipedelay-2 = <0x2>; + xlnx,synch-pipedelay-3 = <0x2>; + xlnx,tavdv-ps-mem-0 = <0x1adb0>; + xlnx,tavdv-ps-mem-1 = <0x3a98>; + xlnx,tavdv-ps-mem-2 = <0x3a98>; + xlnx,tavdv-ps-mem-3 = <0x3a98>; + xlnx,tcedv-ps-mem-0 = <0x1adb0>; + xlnx,tcedv-ps-mem-1 = <0x3a98>; + xlnx,tcedv-ps-mem-2 = <0x3a98>; + xlnx,tcedv-ps-mem-3 = <0x3a98>; + xlnx,thzce-ps-mem-0 = <0x88b8>; + xlnx,thzce-ps-mem-1 = <0x1b58>; + xlnx,thzce-ps-mem-2 = <0x1b58>; + xlnx,thzce-ps-mem-3 = <0x1b58>; + xlnx,thzoe-ps-mem-0 = <0x1b58>; + xlnx,thzoe-ps-mem-1 = <0x1b58>; + xlnx,thzoe-ps-mem-2 = <0x1b58>; + xlnx,thzoe-ps-mem-3 = <0x1b58>; + xlnx,tlzwe-ps-mem-0 = <0x88b8>; + xlnx,tlzwe-ps-mem-1 = <0x0>; + xlnx,tlzwe-ps-mem-2 = <0x0>; + xlnx,tlzwe-ps-mem-3 = <0x0>; + xlnx,twc-ps-mem-0 = <0x2af8>; + xlnx,twc-ps-mem-1 = <0x3a98>; + xlnx,twc-ps-mem-2 = <0x3a98>; + xlnx,twc-ps-mem-3 = <0x3a98>; + xlnx,twp-ps-mem-0 = <0x11170>; + xlnx,twp-ps-mem-1 = <0x2ee0>; + xlnx,twp-ps-mem-2 = <0x2ee0>; + xlnx,twp-ps-mem-3 = <0x2ee0>; + xlnx,xcl0-linesize = <0x4>; + xlnx,xcl0-writexfer = <0x1>; + xlnx,xcl1-linesize = <0x4>; + xlnx,xcl1-writexfer = <0x1>; + xlnx,xcl2-linesize = <0x4>; + xlnx,xcl2-writexfer = <0x1>; + xlnx,xcl3-linesize = <0x4>; + xlnx,xcl3-writexfer = <0x1>; + } ; + Hard_Ethernet_MAC: xps-ll-temac@81c00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xlnx,compound"; + ranges ; + ethernet@81c00000 { + compatible = "xlnx,xps-ll-temac-1.01.b", "xlnx,xps-ll-temac-1.00.a"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 5 2 >; + llink-connected = <&PIM3>; + local-mac-address = [ 00 0a 35 00 00 00 ]; + reg = < 0x81c00000 0x40 >; + xlnx,bus2core-clk-ratio = <0x1>; + xlnx,phy-type = <0x1>; + xlnx,phyaddr = <0x1>; + xlnx,rxcsum = <0x0>; + xlnx,rxfifo = <0x1000>; + xlnx,temac-type = <0x0>; + xlnx,txcsum = <0x0>; + xlnx,txfifo = <0x1000>; + } ; + } ; + IIC_EEPROM: i2c@81600000 { + compatible = "xlnx,xps-iic-2.00.a"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 6 2 >; + reg = < 0x81600000 0x10000 >; + xlnx,clk-freq = <0x7735940>; + xlnx,family = "virtex5"; + xlnx,gpo-width = <0x1>; + xlnx,iic-freq = <0x186a0>; + xlnx,scl-inertial-delay = <0x0>; + xlnx,sda-inertial-delay = <0x0>; + xlnx,ten-bit-adr = <0x0>; + } ; + LEDs_8Bit: gpio@81400000 { + compatible = "xlnx,xps-gpio-1.00.a"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 7 2 >; + reg = < 0x81400000 0x10000 >; + xlnx,all-inputs = <0x0>; + xlnx,all-inputs-2 = <0x0>; + xlnx,dout-default = <0x0>; + xlnx,dout-default-2 = <0x0>; + xlnx,family = "virtex5"; + xlnx,gpio-width = <0x8>; + xlnx,interrupt-present = <0x1>; + xlnx,is-bidir = <0x1>; + xlnx,is-bidir-2 = <0x1>; + xlnx,is-dual = <0x0>; + xlnx,tri-default = <0xffffffff>; + xlnx,tri-default-2 = <0xffffffff>; + #gpio-cells = <2>; + gpio-controller; + } ; + + gpio-leds { + compatible = "gpio-leds"; + + heartbeat { + label = "Heartbeat"; + gpios = <&LEDs_8Bit 4 1>; + linux,default-trigger = "heartbeat"; + }; + + yellow { + label = "Yellow"; + gpios = <&LEDs_8Bit 5 1>; + }; + + red { + label = "Red"; + gpios = <&LEDs_8Bit 6 1>; + }; + + green { + label = "Green"; + gpios = <&LEDs_8Bit 7 1>; + }; + } ; + RS232_Uart_1: serial@84000000 { + clock-frequency = <125000000>; + compatible = "xlnx,xps-uartlite-1.00.a"; + current-speed = <115200>; + device_type = "serial"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 8 0 >; + port-number = <0>; + reg = < 0x84000000 0x10000 >; + xlnx,baudrate = <0x1c200>; + xlnx,data-bits = <0x8>; + xlnx,family = "virtex5"; + xlnx,odd-parity = <0x0>; + xlnx,use-parity = <0x0>; + } ; + SysACE_CompactFlash: sysace@83600000 { + compatible = "xlnx,xps-sysace-1.00.a"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 4 2 >; + reg = < 0x83600000 0x10000 >; + xlnx,family = "virtex5"; + xlnx,mem-width = <0x10>; + } ; + debug_module: debug@84400000 { + compatible = "xlnx,mdm-1.00.d"; + reg = < 0x84400000 0x10000 >; + xlnx,family = "virtex5"; + xlnx,interconnect = <0x1>; + xlnx,jtag-chain = <0x2>; + xlnx,mb-dbg-ports = <0x1>; + xlnx,uart-width = <0x8>; + xlnx,use-uart = <0x1>; + xlnx,write-fsl-ports = <0x0>; + } ; + mpmc@90000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xlnx,mpmc-4.02.a"; + ranges ; + PIM3: sdma@84600180 { + compatible = "xlnx,ll-dma-1.00.a"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 2 2 1 2 >; + reg = < 0x84600180 0x80 >; + } ; + } ; + xps_intc_0: interrupt-controller@81800000 { + #interrupt-cells = <0x2>; + compatible = "xlnx,xps-intc-1.00.a"; + interrupt-controller ; + reg = < 0x81800000 0x10000 >; + xlnx,kind-of-intr = <0x100>; + xlnx,num-intr-inputs = <0x9>; + } ; + xps_timer_1: timer@83c00000 { + compatible = "xlnx,xps-timer-1.00.a"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 3 2 >; + reg = < 0x83c00000 0x10000 >; + xlnx,count-width = <0x20>; + xlnx,family = "virtex5"; + xlnx,gen0-assert = <0x1>; + xlnx,gen1-assert = <0x1>; + xlnx,one-timer-only = <0x0>; + xlnx,trig0-assert = <0x1>; + xlnx,trig1-assert = <0x1>; + } ; + } ; +} ; diff --git a/arch/microblaze/boot/linked_dtb.S b/arch/microblaze/boot/linked_dtb.S deleted file mode 100644 index cb2b537aebe..00000000000 --- a/arch/microblaze/boot/linked_dtb.S +++ /dev/null @@ -1,3 +0,0 @@ -.section __fdt_blob,"a" -.incbin "arch/microblaze/boot/system.dtb" - diff --git a/arch/microblaze/configs/mmu_defconfig b/arch/microblaze/configs/mmu_defconfig index b3f5eecff2a..e2f6543b91e 100644 --- a/arch/microblaze/configs/mmu_defconfig +++ b/arch/microblaze/configs/mmu_defconfig @@ -1,26 +1,21 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y +CONFIG_AUDIT=y +CONFIG_AUDIT_LOGINUID_IMMUTABLE=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="rootfs.cpio" -CONFIG_INITRAMFS_COMPRESSION_GZIP=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_EXPERT=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_HOTPLUG is not set # CONFIG_BASE_FULL is not set -# CONFIG_FUTEX is not set -# CONFIG_EPOLL is not set -# CONFIG_SIGNALFD is not set -# CONFIG_SHMEM is not set +CONFIG_EMBEDDED=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_OPT_LIB_ASM=y +CONFIG_PARTITION_ADVANCED=y +# CONFIG_EFI_PARTITION is not set CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1 CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1 CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1 @@ -31,39 +26,66 @@ CONFIG_HZ_100=y CONFIG_MMU=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE_FORCE=y +CONFIG_HIGHMEM=y +CONFIG_PCI=y +CONFIG_PCI_XILINX=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y # CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set +CONFIG_MTD=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y CONFIG_XILINX_EMACLITE=y +CONFIG_XILINX_LL_TEMAC=y # CONFIG_INPUT is not set # CONFIG_SERIO is not set # CONFIG_VT is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_UARTLITE=y CONFIG_SERIAL_UARTLITE_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HW_RANDOM is not set +CONFIG_XILINX_HWICAP=y +CONFIG_I2C=y +CONFIG_I2C_XILINX=y +CONFIG_SPI=y +CONFIG_SPI_XILINX=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_XILINX=y # CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_XILINX_WATCHDOG=y +CONFIG_FB=y +CONFIG_FB_XILINX=y # CONFIG_USB_SUPPORT is not set +CONFIG_UIO=y +CONFIG_UIO_PDRV=y +CONFIG_UIO_PDRV_GENIRQ=y +CONFIG_UIO_DMEM_GENIRQ=y CONFIG_EXT2_FS=y # CONFIG_DNOTIFY is not set +CONFIG_CRAMFS=y +CONFIG_ROMFS_FS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_CIFS=y CONFIG_CIFS_STATS=y CONFIG_CIFS_STATS2=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_SLAB=y CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_KGDB=y +CONFIG_KGDB_TESTS=y +CONFIG_KGDB_KDB=y CONFIG_EARLY_PRINTK=y +CONFIG_KEYS=y +CONFIG_ENCRYPTED_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/microblaze/configs/nommu_defconfig b/arch/microblaze/configs/nommu_defconfig index 0249e4b7e1d..a29ebd4a9fc 100644 --- a/arch/microblaze/configs/nommu_defconfig +++ b/arch/microblaze/configs/nommu_defconfig @@ -1,41 +1,42 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y +CONFIG_AUDIT=y +CONFIG_AUDIT_LOGINUID_IMMUTABLE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_EXPERT=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_HOTPLUG is not set # CONFIG_BASE_FULL is not set +CONFIG_EMBEDDED=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -# CONFIG_OPT_LIB_FUNCTION is not set +CONFIG_PARTITION_ADVANCED=y +# CONFIG_EFI_PARTITION is not set CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1 CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1 CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1 CONFIG_XILINX_MICROBLAZE0_USE_DIV=1 CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=2 CONFIG_XILINX_MICROBLAZE0_USE_FPU=2 -CONFIG_HIGH_RES_TIMERS=y CONFIG_HZ_100=y CONFIG_CMDLINE_BOOL=y -CONFIG_BINFMT_FLAT=y +CONFIG_CMDLINE_FORCE=y +CONFIG_PCI=y +CONFIG_PCI_XILINX=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y # CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set -# CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -45,41 +46,56 @@ CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_RAM=y CONFIG_MTD_UCLINUX=y CONFIG_PROC_DEVICETREE=y -CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y +CONFIG_XILINX_EMACLITE=y +CONFIG_XILINX_LL_TEMAC=y # CONFIG_INPUT is not set # CONFIG_SERIO is not set # CONFIG_VT is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_UARTLITE=y CONFIG_SERIAL_UARTLITE_CONSOLE=y -CONFIG_HW_RANDOM=y +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_HW_RANDOM is not set +CONFIG_XILINX_HWICAP=y +CONFIG_I2C=y +CONFIG_I2C_XILINX=y +CONFIG_SPI=y +CONFIG_SPI_XILINX=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_XILINX=y # CONFIG_HWMON is not set -CONFIG_VIDEO_OUTPUT_CONTROL=y +CONFIG_WATCHDOG=y +CONFIG_XILINX_WATCHDOG=y +CONFIG_FB=y +CONFIG_FB_XILINX=y +# CONFIG_USB_SUPPORT is not set +CONFIG_UIO=y +CONFIG_UIO_PDRV=y +CONFIG_UIO_PDRV_GENIRQ=y +CONFIG_UIO_DMEM_GENIRQ=y CONFIG_EXT2_FS=y # CONFIG_DNOTIFY is not set CONFIG_CRAMFS=y CONFIG_ROMFS_FS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y -CONFIG_UNUSED_SYMBOLS=y -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_SHIRQ=y +CONFIG_NLS=y CONFIG_DETECT_HUNG_TASK=y -CONFIG_SCHEDSTATS=y -CONFIG_TIMER_STATS=y -CONFIG_DEBUG_OBJECTS=y -CONFIG_DEBUG_OBJECTS_SELFTEST=y -CONFIG_DEBUG_OBJECTS_FREE=y -CONFIG_DEBUG_OBJECTS_TIMERS=y +CONFIG_DEBUG_SLAB=y +CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_LIST=y -CONFIG_DEBUG_SG=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_EARLY_PRINTK=y +CONFIG_KEYS=y +CONFIG_ENCRYPTED_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_MD4=y +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_ARC4=y +CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRC32 is not set diff --git a/arch/microblaze/include/asm/Kbuild b/arch/microblaze/include/asm/Kbuild index db5294c30ca..35b3ecaf25d 100644 --- a/arch/microblaze/include/asm/Kbuild +++ b/arch/microblaze/include/asm/Kbuild @@ -1,3 +1,11 @@ -include include/asm-generic/Kbuild.asm -header-y += elf.h +generic-y += barrier.h +generic-y += clkdev.h +generic-y += cputime.h +generic-y += device.h +generic-y += exec.h +generic-y += hash.h +generic-y += mcs_spinlock.h +generic-y += preempt.h +generic-y += syscalls.h +generic-y += trace_clock.h diff --git a/arch/microblaze/include/asm/atomic.h b/arch/microblaze/include/asm/atomic.h index 472d8bf726d..42ac382a09d 100644 --- a/arch/microblaze/include/asm/atomic.h +++ b/arch/microblaze/include/asm/atomic.h @@ -22,5 +22,6 @@ static inline int atomic_dec_if_positive(atomic_t *v) return res; } +#define atomic_dec_if_positive atomic_dec_if_positive #endif /* _ASM_MICROBLAZE_ATOMIC_H */ diff --git a/arch/microblaze/include/asm/barrier.h b/arch/microblaze/include/asm/barrier.h deleted file mode 100644 index df5be3e8704..00000000000 --- a/arch/microblaze/include/asm/barrier.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_BARRIER_H -#define _ASM_MICROBLAZE_BARRIER_H - -#define nop() asm volatile ("nop") - -#define smp_read_barrier_depends() do {} while (0) -#define read_barrier_depends() do {} while (0) - -#define mb() barrier() -#define rmb() mb() -#define wmb() mb() -#define set_mb(var, value) do { var = value; mb(); } while (0) -#define set_wmb(var, value) do { var = value; wmb(); } while (0) - -#define smp_mb() mb() -#define smp_rmb() rmb() -#define smp_wmb() wmb() - -#endif /* _ASM_MICROBLAZE_BARRIER_H */ diff --git a/arch/microblaze/include/asm/cacheflush.h b/arch/microblaze/include/asm/cacheflush.h index 0f553bc009a..ffea82a16d2 100644 --- a/arch/microblaze/include/asm/cacheflush.h +++ b/arch/microblaze/include/asm/cacheflush.h @@ -102,21 +102,23 @@ do { \ #define flush_cache_range(vma, start, len) do { } while (0) -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ -do { \ - u32 addr = virt_to_phys(dst); \ - memcpy((dst), (src), (len)); \ - if (vma->vm_flags & VM_EXEC) { \ - invalidate_icache_range((unsigned) (addr), \ - (unsigned) (addr) + PAGE_SIZE); \ - flush_dcache_range((unsigned) (addr), \ - (unsigned) (addr) + PAGE_SIZE); \ - } \ -} while (0) - -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ -do { \ - memcpy((dst), (src), (len)); \ -} while (0) +static inline void copy_to_user_page(struct vm_area_struct *vma, + struct page *page, unsigned long vaddr, + void *dst, void *src, int len) +{ + u32 addr = virt_to_phys(dst); + memcpy(dst, src, len); + if (vma->vm_flags & VM_EXEC) { + invalidate_icache_range(addr, addr + PAGE_SIZE); + flush_dcache_range(addr, addr + PAGE_SIZE); + } +} + +static inline void copy_from_user_page(struct vm_area_struct *vma, + struct page *page, unsigned long vaddr, + void *dst, void *src, int len) +{ + memcpy(dst, src, len); +} #endif /* _ASM_MICROBLAZE_CACHEFLUSH_H */ diff --git a/arch/microblaze/include/asm/clinkage.h b/arch/microblaze/include/asm/clinkage.h deleted file mode 100644 index 9e218435a55..00000000000 --- a/arch/microblaze/include/asm/clinkage.h +++ /dev/null @@ -1 +0,0 @@ -#include <linux/linkage.h> diff --git a/arch/microblaze/include/asm/cpuinfo.h b/arch/microblaze/include/asm/cpuinfo.h index 7d6831ac8a4..3337417fcdc 100644 --- a/arch/microblaze/include/asm/cpuinfo.h +++ b/arch/microblaze/include/asm/cpuinfo.h @@ -91,15 +91,18 @@ extern struct cpuinfo cpuinfo; /* fwd declarations of the various CPUinfo populators */ void setup_cpuinfo(void); +void setup_cpuinfo_clk(void); void set_cpuinfo_static(struct cpuinfo *ci, struct device_node *cpu); void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu); static inline unsigned int fcpu(struct device_node *cpu, char *n) { - const __be32 *val; - return (val = of_get_property(cpu, n, NULL)) ? - be32_to_cpup(val) : 0; + u32 val = 0; + + of_property_read_u32(cpu, n, &val); + + return val; } #endif /* _ASM_MICROBLAZE_CPUINFO_H */ diff --git a/arch/microblaze/include/asm/cputime.h b/arch/microblaze/include/asm/cputime.h deleted file mode 100644 index 6d68ad7e0ea..00000000000 --- a/arch/microblaze/include/asm/cputime.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/cputime.h> diff --git a/arch/microblaze/include/asm/delay.h b/arch/microblaze/include/asm/delay.h index 05b7d39e439..66fc24c2423 100644 --- a/arch/microblaze/include/asm/delay.h +++ b/arch/microblaze/include/asm/delay.h @@ -13,6 +13,8 @@ #ifndef _ASM_MICROBLAZE_DELAY_H #define _ASM_MICROBLAZE_DELAY_H +#include <linux/param.h> + extern inline void __delay(unsigned long loops) { asm volatile ("# __delay \n\t" \ diff --git a/arch/microblaze/include/asm/device.h b/arch/microblaze/include/asm/device.h deleted file mode 100644 index 123b2fe72d0..00000000000 --- a/arch/microblaze/include/asm/device.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Arch specific extensions to struct device - * - * This file is subject to the terms and conditions of the GNU General Public - * License v2. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_DEVICE_H -#define _ASM_MICROBLAZE_DEVICE_H - -struct device_node; - -struct dev_archdata { - /* DMA operations on that device */ - struct dma_map_ops *dma_ops; - void *dma_data; -}; - -struct pdev_archdata { - u64 dma_mask; -}; - -#endif /* _ASM_MICROBLAZE_DEVICE_H */ - - diff --git a/arch/microblaze/include/asm/dma-mapping.h b/arch/microblaze/include/asm/dma-mapping.h index 01d228286cb..ab353723076 100644 --- a/arch/microblaze/include/asm/dma-mapping.h +++ b/arch/microblaze/include/asm/dma-mapping.h @@ -35,16 +35,6 @@ #define __dma_alloc_coherent(dev, gfp, size, handle) NULL #define __dma_free_coherent(size, addr) ((void)0) -static inline unsigned long device_to_mask(struct device *dev) -{ - if (dev->dma_mask && *dev->dma_mask) - return *dev->dma_mask; - /* Assume devices without mask can take 32 bit addresses */ - return 0xfffffffful; -} - -extern struct dma_map_ops *dma_ops; - /* * Available generic sets of operations */ @@ -52,20 +42,7 @@ extern struct dma_map_ops dma_direct_ops; static inline struct dma_map_ops *get_dma_ops(struct device *dev) { - /* We don't handle the NULL dev case for ISA for now. We could - * do it via an out of line call but it is not needed for now. The - * only ISA DMA device we support is the floppy and we have a hack - * in the floppy driver directly to get a device for us. - */ - if (unlikely(!dev) || !dev->archdata.dma_ops) - return NULL; - - return dev->archdata.dma_ops; -} - -static inline void set_dma_ops(struct device *dev, struct dma_map_ops *ops) -{ - dev->archdata.dma_ops = ops; + return &dma_direct_ops; } static inline int dma_supported(struct device *dev, u64 mask) @@ -114,6 +91,8 @@ static inline void __dma_sync(unsigned long paddr, static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) { struct dma_map_ops *ops = get_dma_ops(dev); + + debug_dma_mapping_error(dev, dma_addr); if (ops->mapping_error) return ops->mapping_error(dev, dma_addr); diff --git a/arch/microblaze/include/asm/elf.h b/arch/microblaze/include/asm/elf.h index 834849f59ae..65902444906 100644 --- a/arch/microblaze/include/asm/elf.h +++ b/arch/microblaze/include/asm/elf.h @@ -7,118 +7,24 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. */ - #ifndef _ASM_MICROBLAZE_ELF_H #define _ASM_MICROBLAZE_ELF_H -/* - * Note there is no "official" ELF designation for Microblaze. - * I've snaffled the value from the microblaze binutils source code - * /binutils/microblaze/include/elf/microblaze.h - */ -#define EM_MICROBLAZE 189 -#define EM_MICROBLAZE_OLD 0xbaab -#define ELF_ARCH EM_MICROBLAZE - -/* - * This is used to ensure we don't load something for the wrong architecture. - */ -#define elf_check_arch(x) ((x)->e_machine == EM_MICROBLAZE \ - || (x)->e_machine == EM_MICROBLAZE_OLD) - -/* - * These are used to set parameters in the core dumps. - */ -#define ELF_CLASS ELFCLASS32 +#include <uapi/asm/elf.h> #ifndef __uClinux__ - -/* - * ELF register definitions.. - */ - -#include <asm/ptrace.h> -#include <asm/byteorder.h> - #ifndef ELF_GREG_T -#define ELF_GREG_T -typedef unsigned long elf_greg_t; #endif - #ifndef ELF_NGREG -#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t)) #endif - #ifndef ELF_GREGSET_T -#define ELF_GREGSET_T -typedef elf_greg_t elf_gregset_t[ELF_NGREG]; #endif - #ifndef ELF_FPREGSET_T -#define ELF_FPREGSET_T - -/* TBD */ -#define ELF_NFPREG 33 /* includes fsr */ -typedef unsigned long elf_fpreg_t; -typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; - -/* typedef struct user_fpu_struct elf_fpregset_t; */ #endif - -/* This is the location that an ET_DYN program is loaded if exec'ed. Typical - * use of this is to invoke "./ld.so someprog" to test out a new version of - * the loader. We need to make sure that it is out of the way of the program - * that it will "exec", and that there is sufficient room for the brk. - */ - -#define ELF_ET_DYN_BASE (0x08000000) - #ifdef __MICROBLAZEEL__ -#define ELF_DATA ELFDATA2LSB #else -#define ELF_DATA ELFDATA2MSB -#endif - -#define ELF_EXEC_PAGESIZE PAGE_SIZE - - -#define ELF_CORE_COPY_REGS(_dest, _regs) \ - memcpy((char *) &_dest, (char *) _regs, \ - sizeof(struct pt_regs)); - -/* This yields a mask that user programs can use to figure out what - * instruction set this CPU supports. This could be done in user space, - * but it's not easy, and we've already done it here. - */ -#define ELF_HWCAP (0) - -/* This yields a string that ld.so will use to load implementation - * specific libraries for optimization. This is more specific in - * intent than poking at uname or /proc/cpuinfo. - - * For the moment, we have only optimizations for the Intel generations, - * but that could change... - */ -#define ELF_PLATFORM (NULL) - -/* Added _f parameter. Is this definition correct: TBD */ -#define ELF_PLAT_INIT(_r, _f) \ -do { \ - _r->r1 = _r->r1 = _r->r2 = _r->r3 = \ - _r->r4 = _r->r5 = _r->r6 = _r->r7 = \ - _r->r8 = _r->r9 = _r->r10 = _r->r11 = \ - _r->r12 = _r->r13 = _r->r14 = _r->r15 = \ - _r->r16 = _r->r17 = _r->r18 = _r->r19 = \ - _r->r20 = _r->r21 = _r->r22 = _r->r23 = \ - _r->r24 = _r->r25 = _r->r26 = _r->r27 = \ - _r->r28 = _r->r29 = _r->r30 = _r->r31 = \ - 0; \ -} while (0) - -#ifdef __KERNEL__ -#define SET_PERSONALITY(ex) set_personality(PER_LINUX_32BIT) #endif - +#define SET_PERSONALITY(ex) \ + set_personality(PER_LINUX_32BIT | (current->personality & (~PER_MASK))) #endif /* __uClinux__ */ - #endif /* _ASM_MICROBLAZE_ELF_H */ diff --git a/arch/microblaze/include/asm/entry.h b/arch/microblaze/include/asm/entry.h index af0144b91b7..b4a4cb150aa 100644 --- a/arch/microblaze/include/asm/entry.h +++ b/arch/microblaze/include/asm/entry.h @@ -29,6 +29,8 @@ DECLARE_PER_CPU(unsigned int, KM); /* Kernel/user mode */ DECLARE_PER_CPU(unsigned int, ENTRY_SP); /* Saved SP on kernel entry */ DECLARE_PER_CPU(unsigned int, R11_SAVE); /* Temp variable for entry */ DECLARE_PER_CPU(unsigned int, CURRENT_SAVE); /* Saved current pointer */ + +extern asmlinkage void do_notify_resume(struct pt_regs *regs, int in_syscall); # endif /* __ASSEMBLY__ */ #endif /* _ASM_MICROBLAZE_ENTRY_H */ diff --git a/arch/microblaze/include/asm/exec.h b/arch/microblaze/include/asm/exec.h deleted file mode 100644 index e750de1fe8f..00000000000 --- a/arch/microblaze/include/asm/exec.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_EXEC_H -#define _ASM_MICROBLAZE_EXEC_H - -#define arch_align_stack(x) (x) - -#endif /* _ASM_MICROBLAZE_EXEC_H */ diff --git a/arch/microblaze/include/asm/fixmap.h b/arch/microblaze/include/asm/fixmap.h index f2b312e10b1..06c0e2b1883 100644 --- a/arch/microblaze/include/asm/fixmap.h +++ b/arch/microblaze/include/asm/fixmap.h @@ -58,52 +58,12 @@ enum fixed_addresses { extern void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t flags); -#define set_fixmap(idx, phys) \ - __set_fixmap(idx, phys, PAGE_KERNEL) -/* - * Some hardware wants to get fixmapped without caching. - */ -#define set_fixmap_nocache(idx, phys) \ - __set_fixmap(idx, phys, PAGE_KERNEL_CI) - -#define clear_fixmap(idx) \ - __set_fixmap(idx, 0, __pgprot(0)) - #define __FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT) #define FIXADDR_START (FIXADDR_TOP - __FIXADDR_SIZE) -#define __fix_to_virt(x) (FIXADDR_TOP - ((x) << PAGE_SHIFT)) -#define __virt_to_fix(x) ((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT) - -extern void __this_fixmap_does_not_exist(void); - -/* - * 'index to address' translation. If anyone tries to use the idx - * directly without tranlation, we catch the bug with a NULL-deference - * kernel oops. Illegal ranges of incoming indices are caught too. - */ -static __always_inline unsigned long fix_to_virt(const unsigned int idx) -{ - /* - * this branch gets completely eliminated after inlining, - * except when someone tries to use fixaddr indices in an - * illegal way. (such as mixing up address types or using - * out-of-range indices). - * - * If it doesn't get removed, the linker will complain - * loudly with a reasonably clear error message.. - */ - if (idx >= __end_of_fixed_addresses) - __this_fixmap_does_not_exist(); - - return __fix_to_virt(idx); -} +#define FIXMAP_PAGE_NOCACHE PAGE_KERNEL_CI -static inline unsigned long virt_to_fix(const unsigned long vaddr) -{ - BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START); - return __virt_to_fix(vaddr); -} +#include <asm-generic/fixmap.h> #endif /* !__ASSEMBLY__ */ #endif diff --git a/arch/microblaze/include/asm/futex.h b/arch/microblaze/include/asm/futex.h index ff8cde159d9..01848f056f4 100644 --- a/arch/microblaze/include/asm/futex.h +++ b/arch/microblaze/include/asm/futex.h @@ -105,7 +105,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, __asm__ __volatile__ ("1: lwx %1, %3, r0; \ cmp %2, %1, %4; \ - beqi %2, 3f; \ + bnei %2, 3f; \ 2: swx %5, %3, r0; \ addic %2, r0, 0; \ bnei %2, 1b; \ diff --git a/arch/microblaze/include/asm/highmem.h b/arch/microblaze/include/asm/highmem.h index 2446a73140a..d0463893243 100644 --- a/arch/microblaze/include/asm/highmem.h +++ b/arch/microblaze/include/asm/highmem.h @@ -71,7 +71,7 @@ static inline void kunmap(struct page *page) kunmap_high(page); } -static inline void *__kmap_atomic(struct page *page) +static inline void *kmap_atomic(struct page *page) { return kmap_atomic_prot(page, kmap_prot); } diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h index 8cdac14b55b..433751b2a00 100644 --- a/arch/microblaze/include/asm/io.h +++ b/arch/microblaze/include/asm/io.h @@ -15,211 +15,38 @@ #include <asm/page.h> #include <linux/types.h> #include <linux/mm.h> /* Get struct page {...} */ -#include <asm-generic/iomap.h> #ifndef CONFIG_PCI #define _IO_BASE 0 #define _ISA_MEM_BASE 0 -#define PCI_DRAM_OFFSET 0 #else #define _IO_BASE isa_io_base #define _ISA_MEM_BASE isa_mem_base -#define PCI_DRAM_OFFSET pci_dram_offset -#endif +struct pci_dev; +extern void pci_iounmap(struct pci_dev *dev, void __iomem *); +#define pci_iounmap pci_iounmap extern unsigned long isa_io_base; -extern unsigned long pci_io_base; -extern unsigned long pci_dram_offset; - extern resource_size_t isa_mem_base; +#endif +#define PCI_IOBASE ((void __iomem *)_IO_BASE) #define IO_SPACE_LIMIT (0xFFFFFFFF) -static inline unsigned char __raw_readb(const volatile void __iomem *addr) -{ - return *(volatile unsigned char __force *)addr; -} -static inline unsigned short __raw_readw(const volatile void __iomem *addr) -{ - return *(volatile unsigned short __force *)addr; -} -static inline unsigned int __raw_readl(const volatile void __iomem *addr) -{ - return *(volatile unsigned int __force *)addr; -} -static inline unsigned long __raw_readq(const volatile void __iomem *addr) -{ - return *(volatile unsigned long __force *)addr; -} -static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr) -{ - *(volatile unsigned char __force *)addr = v; -} -static inline void __raw_writew(unsigned short v, volatile void __iomem *addr) -{ - *(volatile unsigned short __force *)addr = v; -} -static inline void __raw_writel(unsigned int v, volatile void __iomem *addr) -{ - *(volatile unsigned int __force *)addr = v; -} -static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr) -{ - *(volatile unsigned long __force *)addr = v; -} - -/* - * read (readb, readw, readl, readq) and write (writeb, writew, - * writel, writeq) accessors are for PCI and thus little endian. - * Linux 2.4 for Microblaze had this wrong. - */ -static inline unsigned char readb(const volatile void __iomem *addr) -{ - return *(volatile unsigned char __force *)addr; -} -static inline unsigned short readw(const volatile void __iomem *addr) -{ - return le16_to_cpu(*(volatile unsigned short __force *)addr); -} -static inline unsigned int readl(const volatile void __iomem *addr) -{ - return le32_to_cpu(*(volatile unsigned int __force *)addr); -} -static inline void writeb(unsigned char v, volatile void __iomem *addr) -{ - *(volatile unsigned char __force *)addr = v; -} -static inline void writew(unsigned short v, volatile void __iomem *addr) -{ - *(volatile unsigned short __force *)addr = cpu_to_le16(v); -} -static inline void writel(unsigned int v, volatile void __iomem *addr) -{ - *(volatile unsigned int __force *)addr = cpu_to_le32(v); -} - -/* ioread and iowrite variants. thease are for now same as __raw_ - * variants of accessors. we might check for endianess in the feature - */ -#define ioread8(addr) __raw_readb((u8 *)(addr)) -#define ioread16(addr) __raw_readw((u16 *)(addr)) -#define ioread32(addr) __raw_readl((u32 *)(addr)) -#define iowrite8(v, addr) __raw_writeb((u8)(v), (u8 *)(addr)) -#define iowrite16(v, addr) __raw_writew((u16)(v), (u16 *)(addr)) -#define iowrite32(v, addr) __raw_writel((u32)(v), (u32 *)(addr)) - -#define ioread16be(addr) __raw_readw((u16 *)(addr)) -#define ioread32be(addr) __raw_readl((u32 *)(addr)) -#define iowrite16be(v, addr) __raw_writew((u16)(v), (u16 *)(addr)) -#define iowrite32be(v, addr) __raw_writel((u32)(v), (u32 *)(addr)) - -/* These are the definitions for the x86 IO instructions - * inb/inw/inl/outb/outw/outl, the "string" versions - * insb/insw/insl/outsb/outsw/outsl, and the "pausing" versions - * inb_p/inw_p/... - * The macros don't do byte-swapping. - */ -#define inb(port) readb((u8 *)((port))) -#define outb(val, port) writeb((val), (u8 *)((unsigned long)(port))) -#define inw(port) readw((u16 *)((port))) -#define outw(val, port) writew((val), (u16 *)((unsigned long)(port))) -#define inl(port) readl((u32 *)((port))) -#define outl(val, port) writel((val), (u32 *)((unsigned long)(port))) - -#define inb_p(port) inb((port)) -#define outb_p(val, port) outb((val), (port)) -#define inw_p(port) inw((port)) -#define outw_p(val, port) outw((val), (port)) -#define inl_p(port) inl((port)) -#define outl_p(val, port) outl((val), (port)) - -#define memset_io(a, b, c) memset((void *)(a), (b), (c)) -#define memcpy_fromio(a, b, c) memcpy((a), (void *)(b), (c)) -#define memcpy_toio(a, b, c) memcpy((void *)(a), (b), (c)) - #ifdef CONFIG_MMU - -#define phys_to_virt(addr) ((void *)__phys_to_virt(addr)) -#define virt_to_phys(addr) ((unsigned long)__virt_to_phys(addr)) -#define virt_to_bus(addr) ((unsigned long)__virt_to_phys(addr)) - #define page_to_bus(page) (page_to_phys(page)) -#define bus_to_virt(addr) (phys_to_virt(addr)) - -extern void iounmap(void *addr); -/*extern void *__ioremap(phys_addr_t address, unsigned long size, - unsigned long flags);*/ -extern void __iomem *ioremap(phys_addr_t address, unsigned long size); -#define ioremap_writethrough(addr, size) ioremap((addr), (size)) -#define ioremap_nocache(addr, size) ioremap((addr), (size)) -#define ioremap_fullcache(addr, size) ioremap((addr), (size)) -#else /* CONFIG_MMU */ +extern void iounmap(void __iomem *addr); -/** - * virt_to_phys - map virtual addresses to physical - * @address: address to remap - * - * The returned physical address is the physical (CPU) mapping for - * the memory address given. It is only valid to use this function on - * addresses directly mapped or allocated via kmalloc. - * - * This function does not give bus mappings for DMA transfers. In - * almost all conceivable cases a device driver should not be using - * this function - */ -static inline unsigned long __iomem virt_to_phys(volatile void *address) -{ - return __pa((unsigned long)address); -} - -#define virt_to_bus virt_to_phys - -/** - * phys_to_virt - map physical address to virtual - * @address: address to remap - * - * The returned virtual address is a current CPU mapping for - * the memory address given. It is only valid to use this function on - * addresses that have a kernel mapping - * - * This function does not handle bus mappings for DMA transfers. In - * almost all conceivable cases a device driver should not be using - * this function - */ -static inline void *phys_to_virt(unsigned long address) -{ - return (void *)__va(address); -} - -#define bus_to_virt(a) phys_to_virt(a) - -static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size, - unsigned long flags) -{ - return (void *)address; -} - -#define ioremap(physaddr, size) ((void __iomem *)(unsigned long)(physaddr)) -#define iounmap(addr) ((void)0) -#define ioremap_nocache(physaddr, size) ioremap(physaddr, size) +extern void __iomem *ioremap(phys_addr_t address, unsigned long size); +#define ioremap_writethrough(addr, size) ioremap((addr), (size)) +#define ioremap_nocache(addr, size) ioremap((addr), (size)) +#define ioremap_fullcache(addr, size) ioremap((addr), (size)) +#define ioremap_wc(addr, size) ioremap((addr), (size)) #endif /* CONFIG_MMU */ -/* - * Convert a physical pointer to a virtual kernel pointer for /dev/mem - * access - */ -#define xlate_dev_mem_ptr(p) __va(p) - -/* - * Convert a virtual cached pointer to an uncached pointer - */ -#define xlate_dev_kmem_ptr(p) p - -/* - * Big Endian - */ +/* Big Endian */ #define out_be32(a, v) __raw_writel((v), (void __iomem __force *)(a)) #define out_be16(a, v) __raw_writew((v), (a)) @@ -229,10 +56,7 @@ static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size, #define writel_be(v, a) out_be32((__force unsigned *)a, v) #define readl_be(a) in_be32((__force unsigned *)a) -/* - * Little endian - */ - +/* Little endian */ #define out_le32(a, v) __raw_writel(__cpu_to_le32(v), (a)) #define out_le16(a, v) __raw_writew(__cpu_to_le16(v), (a)) @@ -243,9 +67,14 @@ static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size, #define out_8(a, v) __raw_writeb((v), (a)) #define in_8(a) __raw_readb(a) -#define mmiowb() +#include <asm-generic/io.h> + +#define readb_relaxed readb +#define readw_relaxed readw +#define readl_relaxed readl -#define ioport_map(port, nr) ((void __iomem *)(port)) -#define ioport_unmap(addr) +#define writeb_relaxed writeb +#define writew_relaxed writew +#define writel_relaxed writel #endif /* _ASM_MICROBLAZE_IO_H */ diff --git a/arch/microblaze/include/asm/mmu_context.h b/arch/microblaze/include/asm/mmu_context.h index 24eab1674d3..0ccd8c402cd 100644 --- a/arch/microblaze/include/asm/mmu_context.h +++ b/arch/microblaze/include/asm/mmu_context.h @@ -1,5 +1,5 @@ #ifdef CONFIG_MMU -# include "mmu_context_mm.h" +# include <asm/mmu_context_mm.h> #else # include <asm-generic/mmu_context.h> #endif diff --git a/arch/microblaze/include/asm/page.h b/arch/microblaze/include/asm/page.h index 287c5485d28..fd850879854 100644 --- a/arch/microblaze/include/asm/page.h +++ b/arch/microblaze/include/asm/page.h @@ -23,12 +23,10 @@ #ifdef __KERNEL__ /* PAGE_SHIFT determines the page size */ -#if defined(CONFIG_MICROBLAZE_32K_PAGES) -#define PAGE_SHIFT 15 +#if defined(CONFIG_MICROBLAZE_64K_PAGES) +#define PAGE_SHIFT 16 #elif defined(CONFIG_MICROBLAZE_16K_PAGES) #define PAGE_SHIFT 14 -#elif defined(CONFIG_MICROBLAZE_8K_PAGES) -#define PAGE_SHIFT 13 #else #define PAGE_SHIFT 12 #endif @@ -37,6 +35,8 @@ #define LOAD_OFFSET ASM_CONST((CONFIG_KERNEL_START-CONFIG_KERNEL_BASE_ADDR)) +#define PTE_SHIFT (PAGE_SHIFT - 2) /* 1024 ptes per page */ + #ifndef __ASSEMBLY__ /* MS be sure that SLAB allocates aligned objects */ @@ -71,7 +71,6 @@ extern unsigned int __page_offset; * The basic type of a PTE - 32 bit physical addressing. */ typedef unsigned long pte_basic_t; -#define PTE_SHIFT (PAGE_SHIFT - 2) /* 1024 ptes per page */ #define PTE_FMT "%.8lx" #endif /* CONFIG_MMU */ @@ -169,7 +168,6 @@ extern int page_is_ram(unsigned long pfn); # else /* CONFIG_MMU */ # define ARCH_PFN_OFFSET (memory_start >> PAGE_SHIFT) # define pfn_valid(pfn) ((pfn) < (max_mapnr + ARCH_PFN_OFFSET)) -# define VALID_PAGE(page) ((page - mem_map) < max_mapnr) # endif /* CONFIG_MMU */ # endif /* __ASSEMBLY__ */ diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h index a0da88bf70c..468aca8cec0 100644 --- a/arch/microblaze/include/asm/pci.h +++ b/arch/microblaze/include/asm/pci.h @@ -22,6 +22,8 @@ #include <asm/prom.h> #include <asm/pci-bridge.h> +#include <asm-generic/pci-dma-compat.h> + #define PCIBIOS_MIN_IO 0x1000 #define PCIBIOS_MIN_MEM 0x10000000 @@ -42,19 +44,6 @@ struct pci_dev; */ #define pcibios_assign_all_busses() 0 -static inline void pcibios_penalize_isa_irq(int irq, int active) -{ - /* We don't do dynamic PCI IRQ allocation */ -} - -#ifdef CONFIG_PCI -extern void set_pci_dma_ops(struct dma_map_ops *dma_ops); -extern struct dma_map_ops *get_pci_dma_ops(void); -#else /* CONFIG_PCI */ -#define set_pci_dma_ops(d) -#define get_pci_dma_ops() NULL -#endif - #ifdef CONFIG_PCI static inline void pci_dma_burst_advice(struct pci_dev *pdev, enum pci_dma_burst_strategy *strat, @@ -125,8 +114,6 @@ extern void of_scan_pci_bridge(struct device_node *node, extern void of_scan_bus(struct device_node *node, struct pci_bus *bus); extern void of_rescan_bus(struct device_node *node, struct pci_bus *bus); -extern int pci_read_irq_line(struct pci_dev *dev); - extern int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap); @@ -151,7 +138,5 @@ extern void __init xilinx_pci_init(void); static inline void __init xilinx_pci_init(void) { return; } #endif -#include <asm-generic/pci-dma-compat.h> - #endif /* __KERNEL__ */ #endif /* __ASM_MICROBLAZE_PCI_H */ diff --git a/arch/microblaze/include/asm/pgalloc.h b/arch/microblaze/include/asm/pgalloc.h index ebd35792482..7fdf7fabc7d 100644 --- a/arch/microblaze/include/asm/pgalloc.h +++ b/arch/microblaze/include/asm/pgalloc.h @@ -122,8 +122,13 @@ static inline struct page *pte_alloc_one(struct mm_struct *mm, #endif ptepage = alloc_pages(flags, 0); - if (ptepage) - clear_highpage(ptepage); + if (!ptepage) + return NULL; + clear_highpage(ptepage); + if (!pgtable_page_ctor(ptepage)) { + __free_page(ptepage); + return NULL; + } return ptepage; } @@ -158,8 +163,9 @@ extern inline void pte_free_slow(struct page *ptepage) __free_page(ptepage); } -extern inline void pte_free(struct mm_struct *mm, struct page *ptepage) +static inline void pte_free(struct mm_struct *mm, struct page *ptepage) { + pgtable_page_dtor(ptepage); __free_page(ptepage); } diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h index 3ef7b9cafec..95cef0b5f83 100644 --- a/arch/microblaze/include/asm/pgtable.h +++ b/arch/microblaze/include/asm/pgtable.h @@ -13,9 +13,6 @@ #include <asm/setup.h> -#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ - remap_pfn_range(vma, vaddr, pfn, size, prot) - #ifndef __ASSEMBLY__ extern int mem_init_done; #endif @@ -234,12 +231,6 @@ static inline pte_t pte_mkspecial(pte_t pte) { return pte; } #ifndef _PAGE_SHARED #define _PAGE_SHARED 0 #endif -#ifndef _PAGE_HWWRITE -#define _PAGE_HWWRITE 0 -#endif -#ifndef _PAGE_HWEXEC -#define _PAGE_HWEXEC 0 -#endif #ifndef _PAGE_EXEC #define _PAGE_EXEC 0 #endif diff --git a/arch/microblaze/include/asm/processor.h b/arch/microblaze/include/asm/processor.h index af2bb965239..9d31b057c35 100644 --- a/arch/microblaze/include/asm/processor.h +++ b/arch/microblaze/include/asm/processor.h @@ -22,7 +22,6 @@ extern const struct seq_operations cpuinfo_op; # define cpu_relax() barrier() -# define cpu_sleep() do {} while (0) #define task_pt_regs(tsk) \ (((struct pt_regs *)(THREAD_SIZE + task_stack_page(tsk))) - 1) @@ -31,6 +30,7 @@ extern const struct seq_operations cpuinfo_op; void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp); extern void ret_from_fork(void); +extern void ret_from_kernel_thread(void); # endif /* __ASSEMBLY__ */ @@ -78,11 +78,6 @@ extern unsigned long thread_saved_pc(struct task_struct *t); extern unsigned long get_wchan(struct task_struct *p); -/* - * create a kernel thread without removing it from tasklists - */ -extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); - # define KSTK_EIP(tsk) (0) # define KSTK_ESP(tsk) (0) @@ -127,12 +122,10 @@ struct thread_struct { } /* Free all resources held by a thread. */ -extern inline void release_thread(struct task_struct *dead_task) +static inline void release_thread(struct task_struct *dead_task) { } -extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); - /* Free current thread data structures etc. */ static inline void exit_thread(void) { @@ -166,10 +159,6 @@ unsigned long get_wchan(struct task_struct *p); # define STACK_TOP TASK_SIZE # define STACK_TOP_MAX STACK_TOP -void disable_hlt(void); -void enable_hlt(void); -void default_idle(void); - #ifdef CONFIG_DEBUG_FS extern struct dentry *of_debugfs_root; #endif diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h index 20c5e8e5121..2f03ac81585 100644 --- a/arch/microblaze/include/asm/prom.h +++ b/arch/microblaze/include/asm/prom.h @@ -11,19 +11,10 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ - -#include <linux/of.h> /* linux/of.h gets to determine #include ordering */ - #ifndef _ASM_MICROBLAZE_PROM_H #define _ASM_MICROBLAZE_PROM_H -#ifdef __KERNEL__ -#ifndef __ASSEMBLY__ -#include <linux/types.h> -#include <asm/irq.h> -#include <linux/atomic.h> - -#define HAVE_ARCH_DEVTREE_FIXUPS +#include <linux/of.h> /* Other Prototypes */ enum early_consoles { @@ -33,35 +24,4 @@ enum early_consoles { extern int of_early_console(void *version); -/* - * OF address retreival & translation - */ - -#ifdef CONFIG_PCI -extern unsigned long pci_address_to_pio(phys_addr_t address); -#define pci_address_to_pio pci_address_to_pio -#endif /* CONFIG_PCI */ - -/* Parse the ibm,dma-window property of an OF node into the busno, phys and - * size parameters. - */ -void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop, - unsigned long *busno, unsigned long *phys, unsigned long *size); - -extern void kdump_move_device_tree(void); - -/* CPU OF node matching */ -struct device_node *of_get_cpu_node(int cpu, unsigned int *thread); - -#endif /* __ASSEMBLY__ */ -#endif /* __KERNEL__ */ - -/* These includes are put at the bottom because they may contain things - * that are overridden by this file. Ideally they shouldn't be included - * by this file, but there are a bunch of .c files that currently depend - * on it. Eventually they will be cleaned up. */ -#include <linux/of_fdt.h> -#include <linux/of_irq.h> -#include <linux/platform_device.h> - #endif /* _ASM_MICROBLAZE_PROM_H */ diff --git a/arch/microblaze/include/asm/ptrace.h b/arch/microblaze/include/asm/ptrace.h index 94e92c80585..5b18ec124e5 100644 --- a/arch/microblaze/include/asm/ptrace.h +++ b/arch/microblaze/include/asm/ptrace.h @@ -5,80 +5,23 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. */ - #ifndef _ASM_MICROBLAZE_PTRACE_H #define _ASM_MICROBLAZE_PTRACE_H -#ifndef __ASSEMBLY__ - -typedef unsigned long microblaze_reg_t; +#include <uapi/asm/ptrace.h> -struct pt_regs { - microblaze_reg_t r0; - microblaze_reg_t r1; - microblaze_reg_t r2; - microblaze_reg_t r3; - microblaze_reg_t r4; - microblaze_reg_t r5; - microblaze_reg_t r6; - microblaze_reg_t r7; - microblaze_reg_t r8; - microblaze_reg_t r9; - microblaze_reg_t r10; - microblaze_reg_t r11; - microblaze_reg_t r12; - microblaze_reg_t r13; - microblaze_reg_t r14; - microblaze_reg_t r15; - microblaze_reg_t r16; - microblaze_reg_t r17; - microblaze_reg_t r18; - microblaze_reg_t r19; - microblaze_reg_t r20; - microblaze_reg_t r21; - microblaze_reg_t r22; - microblaze_reg_t r23; - microblaze_reg_t r24; - microblaze_reg_t r25; - microblaze_reg_t r26; - microblaze_reg_t r27; - microblaze_reg_t r28; - microblaze_reg_t r29; - microblaze_reg_t r30; - microblaze_reg_t r31; - microblaze_reg_t pc; - microblaze_reg_t msr; - microblaze_reg_t ear; - microblaze_reg_t esr; - microblaze_reg_t fsr; - int pt_mode; -}; - -#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ #define kernel_mode(regs) ((regs)->pt_mode) #define user_mode(regs) (!kernel_mode(regs)) #define instruction_pointer(regs) ((regs)->pc) #define profile_pc(regs) instruction_pointer(regs) +#define user_stack_pointer(regs) ((regs)->r1) static inline long regs_return_value(struct pt_regs *regs) { return regs->r3; } -#else /* __KERNEL__ */ - -/* pt_regs offsets used by gdbserver etc in ptrace syscalls */ -#define PT_GPR(n) ((n) * sizeof(microblaze_reg_t)) -#define PT_PC (32 * sizeof(microblaze_reg_t)) -#define PT_MSR (33 * sizeof(microblaze_reg_t)) -#define PT_EAR (34 * sizeof(microblaze_reg_t)) -#define PT_ESR (35 * sizeof(microblaze_reg_t)) -#define PT_FSR (36 * sizeof(microblaze_reg_t)) -#define PT_KERNEL_MODE (37 * sizeof(microblaze_reg_t)) - -#endif /* __KERNEL */ - #endif /* __ASSEMBLY__ */ - #endif /* _ASM_MICROBLAZE_PTRACE_H */ diff --git a/arch/microblaze/include/asm/sections.h b/arch/microblaze/include/asm/sections.h index 4487e150b45..1b281d3ea73 100644 --- a/arch/microblaze/include/asm/sections.h +++ b/arch/microblaze/include/asm/sections.h @@ -16,11 +16,6 @@ # ifndef __ASSEMBLY__ extern char _ssbss[], _esbss[]; extern unsigned long __ivt_start[], __ivt_end[]; -extern char _etext[], _stext[]; - -# ifdef CONFIG_MTD_UCLINUX -extern char *_ebss; -# endif extern u32 _fdt_start[], _fdt_end[]; diff --git a/arch/microblaze/include/asm/selfmod.h b/arch/microblaze/include/asm/selfmod.h deleted file mode 100644 index c42aff2e6cd..00000000000 --- a/arch/microblaze/include/asm/selfmod.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright (C) 2007-2008 Michal Simek <monstr@monstr.eu> - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_SELFMOD_H -#define _ASM_MICROBLAZE_SELFMOD_H - -/* - * BARRIER_BASE_ADDR is constant address for selfmod function. - * do not change this value - selfmod function is in - * arch/microblaze/kernel/selfmod.c: selfmod_function() - * - * last 16 bits is used for storing register offset - */ - -#define BARRIER_BASE_ADDR 0x1234ff00 - -void selfmod_function(const int *arr_fce, const unsigned int base); - -#endif /* _ASM_MICROBLAZE_SELFMOD_H */ diff --git a/arch/microblaze/include/asm/setup.h b/arch/microblaze/include/asm/setup.h index 0061aa13a34..be84a4d3917 100644 --- a/arch/microblaze/include/asm/setup.h +++ b/arch/microblaze/include/asm/setup.h @@ -7,29 +7,24 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. */ - #ifndef _ASM_MICROBLAZE_SETUP_H #define _ASM_MICROBLAZE_SETUP_H -#define COMMAND_LINE_SIZE 256 +#include <uapi/asm/setup.h> # ifndef __ASSEMBLY__ - -# ifdef __KERNEL__ extern unsigned int boot_cpuid; /* move to smp.h */ extern char cmd_line[COMMAND_LINE_SIZE]; extern char *klimit; -void early_printk(const char *fmt, ...); - int setup_early_printk(char *opt); void remap_early_printk(void); void disable_early_printk(void); -void heartbeat(void); -void setup_heartbeat(void); +void microblaze_heartbeat(void); +void microblaze_setup_heartbeat(void); # ifdef CONFIG_MMU extern void mmu_reset(void); @@ -49,10 +44,8 @@ void machine_shutdown(void); void machine_halt(void); void machine_power_off(void); -void free_init_pages(char *what, unsigned long begin, unsigned long end); extern void *alloc_maybe_bootmem(size_t size, gfp_t mask); extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask); -# endif/* __KERNEL__ */ # endif /* __ASSEMBLY__ */ #endif /* _ASM_MICROBLAZE_SETUP_H */ diff --git a/arch/microblaze/include/asm/syscalls.h b/arch/microblaze/include/asm/syscalls.h deleted file mode 100644 index 27f2f4c0f39..00000000000 --- a/arch/microblaze/include/asm/syscalls.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef __ASM_MICROBLAZE_SYSCALLS_H - -asmlinkage long microblaze_vfork(struct pt_regs *regs); -asmlinkage long microblaze_clone(int flags, unsigned long stack, - struct pt_regs *regs); -asmlinkage long microblaze_execve(const char __user *filenamei, - const char __user *const __user *argv, - const char __user *const __user *envp, - struct pt_regs *regs); - -asmlinkage long sys_clone(int flags, unsigned long stack, struct pt_regs *regs); -#define sys_clone sys_clone - -#include <asm-generic/syscalls.h> - -#endif /* __ASM_MICROBLAZE_SYSCALLS_H */ diff --git a/arch/microblaze/include/asm/thread_info.h b/arch/microblaze/include/asm/thread_info.h index 6c610234ffa..8c9d36591a0 100644 --- a/arch/microblaze/include/asm/thread_info.h +++ b/arch/microblaze/include/asm/thread_info.h @@ -106,8 +106,6 @@ static inline struct thread_info *current_thread_info(void) /* thread information allocation */ #endif /* __ASSEMBLY__ */ -#define PREEMPT_ACTIVE 0x10000000 - /* * thread information flags * - these are process state flags that various assembly files may @@ -121,7 +119,6 @@ static inline struct thread_info *current_thread_info(void) #define TIF_NEED_RESCHED 3 /* rescheduling necessary */ /* restore singlestep on return to user mode */ #define TIF_SINGLESTEP 4 -#define TIF_IRET 5 /* return with iret */ #define TIF_MEMDIE 6 /* is terminating due to OOM killer */ #define TIF_SYSCALL_AUDIT 9 /* syscall auditing active */ #define TIF_SECCOMP 10 /* secure computing */ @@ -134,7 +131,6 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_SIGPENDING (1 << TIF_SIGPENDING) #define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) #define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) -#define _TIF_IRET (1 << TIF_IRET) #define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) #define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) #define _TIF_SECCOMP (1 << TIF_SECCOMP) diff --git a/arch/microblaze/include/asm/types.h b/arch/microblaze/include/asm/types.h deleted file mode 100644 index b9e79bc580d..00000000000 --- a/arch/microblaze/include/asm/types.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/types.h> diff --git a/arch/microblaze/include/asm/uaccess.h b/arch/microblaze/include/asm/uaccess.h index ef25f7538d4..0aa005703a0 100644 --- a/arch/microblaze/include/asm/uaccess.h +++ b/arch/microblaze/include/asm/uaccess.h @@ -90,17 +90,25 @@ static inline int ___range_ok(unsigned long addr, unsigned long size) #else -/* - * Address is valid if: - * - "addr", "addr + size" and "size" are all below the limit - */ -#define access_ok(type, addr, size) \ - (get_fs().seg >= (((unsigned long)(addr)) | \ - (size) | ((unsigned long)(addr) + (size)))) - -/* || printk("access_ok failed for %s at 0x%08lx (size %d), seg 0x%08x\n", - type?"WRITE":"READ",addr,size,get_fs().seg)) */ - +static inline int access_ok(int type, const void __user *addr, + unsigned long size) +{ + if (!size) + goto ok; + + if ((get_fs().seg < ((unsigned long)addr)) || + (get_fs().seg < ((unsigned long)addr + size - 1))) { + pr_debug("ACCESS fail: %s at 0x%08x (size 0x%x), seg 0x%08x\n", + type ? "WRITE" : "READ ", (__force u32)addr, (u32)size, + (u32)get_fs().seg); + return 0; + } +ok: + pr_debug("ACCESS OK: %s at 0x%08x (size 0x%x), seg 0x%08x\n", + type ? "WRITE" : "READ ", (__force u32)addr, (u32)size, + (u32)get_fs().seg); + return 1; +} #endif #ifdef CONFIG_MMU @@ -108,7 +116,7 @@ static inline int ___range_ok(unsigned long addr, unsigned long size) # define __EX_TABLE_SECTION ".section __ex_table,\"a\"\n" #else # define __FIXUP_SECTION ".section .discard,\"ax\"\n" -# define __EX_TABLE_SECTION ".section .discard,\"a\"\n" +# define __EX_TABLE_SECTION ".section .discard,\"ax\"\n" #endif extern unsigned long __copy_tofrom_user(void __user *to, @@ -137,7 +145,7 @@ static inline unsigned long __must_check __clear_user(void __user *to, static inline unsigned long __must_check clear_user(void __user *to, unsigned long n) { - might_sleep(); + might_fault(); if (unlikely(!access_ok(VERIFY_WRITE, to, n))) return n; @@ -298,11 +306,10 @@ extern long __user_bad(void); #define __put_user_check(x, ptr, size) \ ({ \ - typeof(*(ptr)) __pu_val; \ + typeof(*(ptr)) volatile __pu_val = x; \ typeof(*(ptr)) __user *__pu_addr = (ptr); \ int __pu_err = 0; \ \ - __pu_val = (x); \ if (access_ok(VERIFY_WRITE, __pu_addr, size)) { \ switch (size) { \ case 1: \ @@ -364,7 +371,7 @@ extern long __user_bad(void); static inline long copy_from_user(void *to, const void __user *from, unsigned long n) { - might_sleep(); + might_fault(); if (access_ok(VERIFY_READ, from, n)) return __copy_from_user(to, from, n); return n; @@ -378,7 +385,7 @@ static inline long copy_from_user(void *to, static inline long copy_to_user(void __user *to, const void *from, unsigned long n) { - might_sleep(); + might_fault(); if (access_ok(VERIFY_WRITE, to, n)) return __copy_to_user(to, from, n); return n; diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h index d20ffbc86be..fd56a8f6648 100644 --- a/arch/microblaze/include/asm/unistd.h +++ b/arch/microblaze/include/asm/unistd.h @@ -6,408 +6,19 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. */ - #ifndef _ASM_MICROBLAZE_UNISTD_H #define _ASM_MICROBLAZE_UNISTD_H -#define __NR_restart_syscall 0 /* ok */ -#define __NR_exit 1 /* ok */ -#define __NR_fork 2 /* not for no MMU - weird */ -#define __NR_read 3 /* ok */ -#define __NR_write 4 /* ok */ -#define __NR_open 5 /* openat */ -#define __NR_close 6 /* ok */ -#define __NR_waitpid 7 /* waitid */ -#define __NR_creat 8 /* openat */ -#define __NR_link 9 /* linkat */ -#define __NR_unlink 10 /* unlinkat */ -#define __NR_execve 11 /* ok */ -#define __NR_chdir 12 /* ok */ -#define __NR_time 13 /* obsolete -> sys_gettimeofday */ -#define __NR_mknod 14 /* mknodat */ -#define __NR_chmod 15 /* fchmodat */ -#define __NR_lchown 16 /* ok */ -#define __NR_break 17 /* don't know */ -#define __NR_oldstat 18 /* remove */ -#define __NR_lseek 19 /* ok */ -#define __NR_getpid 20 /* ok */ -#define __NR_mount 21 /* ok */ -#define __NR_umount 22 /* ok */ /* use only umount2 */ -#define __NR_setuid 23 /* ok */ -#define __NR_getuid 24 /* ok */ -#define __NR_stime 25 /* obsolete -> sys_settimeofday */ -#define __NR_ptrace 26 /* ok */ -#define __NR_alarm 27 /* obsolete -> sys_setitimer */ -#define __NR_oldfstat 28 /* remove */ -#define __NR_pause 29 /* obsolete -> sys_rt_sigtimedwait */ -#define __NR_utime 30 /* obsolete -> sys_utimesat */ -#define __NR_stty 31 /* remove */ -#define __NR_gtty 32 /* remove */ -#define __NR_access 33 /* faccessat */ -/* can be implemented by sys_setpriority */ -#define __NR_nice 34 -#define __NR_ftime 35 /* remove */ -#define __NR_sync 36 /* ok */ -#define __NR_kill 37 /* ok */ -#define __NR_rename 38 /* renameat */ -#define __NR_mkdir 39 /* mkdirat */ -#define __NR_rmdir 40 /* unlinkat */ -#define __NR_dup 41 /* ok */ -#define __NR_pipe 42 /* ok */ -#define __NR_times 43 /* ok */ -#define __NR_prof 44 /* remove */ -#define __NR_brk 45 /* ok -mmu, nommu specific */ -#define __NR_setgid 46 /* ok */ -#define __NR_getgid 47 /* ok */ -#define __NR_signal 48 /* obsolete -> sys_rt_sigaction */ -#define __NR_geteuid 49 /* ok */ -#define __NR_getegid 50 /* ok */ -#define __NR_acct 51 /* add it and then I can disable it */ -#define __NR_umount2 52 /* remove */ -#define __NR_lock 53 /* remove */ -#define __NR_ioctl 54 /* ok */ -#define __NR_fcntl 55 /* ok -> 64bit version*/ -#define __NR_mpx 56 /* remove */ -#define __NR_setpgid 57 /* ok */ -#define __NR_ulimit 58 /* remove */ -#define __NR_oldolduname 59 /* remove */ -#define __NR_umask 60 /* ok */ -#define __NR_chroot 61 /* ok */ -#define __NR_ustat 62 /* obsolete -> statfs64 */ -#define __NR_dup2 63 /* ok */ -#define __NR_getppid 64 /* ok */ -#define __NR_getpgrp 65 /* obsolete -> sys_getpgid */ -#define __NR_setsid 66 /* ok */ -#define __NR_sigaction 67 /* obsolete -> rt_sigaction */ -#define __NR_sgetmask 68 /* obsolete -> sys_rt_sigprocmask */ -#define __NR_ssetmask 69 /* obsolete ->sys_rt_sigprocmask */ -#define __NR_setreuid 70 /* ok */ -#define __NR_setregid 71 /* ok */ -#define __NR_sigsuspend 72 /* obsolete -> rt_sigsuspend */ -#define __NR_sigpending 73 /* obsolete -> sys_rt_sigpending */ -#define __NR_sethostname 74 /* ok */ -#define __NR_setrlimit 75 /* ok */ -#define __NR_getrlimit 76 /* ok Back compatible 2G limited rlimit */ -#define __NR_getrusage 77 /* ok */ -#define __NR_gettimeofday 78 /* ok */ -#define __NR_settimeofday 79 /* ok */ -#define __NR_getgroups 80 /* ok */ -#define __NR_setgroups 81 /* ok */ -#define __NR_select 82 /* obsolete -> sys_pselect7 */ -#define __NR_symlink 83 /* symlinkat */ -#define __NR_oldlstat 84 /* remove */ -#define __NR_readlink 85 /* obsolete -> sys_readlinkat */ -#define __NR_uselib 86 /* remove */ -#define __NR_swapon 87 /* ok */ -#define __NR_reboot 88 /* ok */ -#define __NR_readdir 89 /* remove ? */ -#define __NR_mmap 90 /* obsolete -> sys_mmap2 */ -#define __NR_munmap 91 /* ok - mmu and nommu */ -#define __NR_truncate 92 /* ok or truncate64 */ -#define __NR_ftruncate 93 /* ok or ftruncate64 */ -#define __NR_fchmod 94 /* ok */ -#define __NR_fchown 95 /* ok */ -#define __NR_getpriority 96 /* ok */ -#define __NR_setpriority 97 /* ok */ -#define __NR_profil 98 /* remove */ -#define __NR_statfs 99 /* ok or statfs64 */ -#define __NR_fstatfs 100 /* ok or fstatfs64 */ -#define __NR_ioperm 101 /* remove */ -#define __NR_socketcall 102 /* remove */ -#define __NR_syslog 103 /* ok */ -#define __NR_setitimer 104 /* ok */ -#define __NR_getitimer 105 /* ok */ -#define __NR_stat 106 /* remove */ -#define __NR_lstat 107 /* remove */ -#define __NR_fstat 108 /* remove */ -#define __NR_olduname 109 /* remove */ -#define __NR_iopl 110 /* remove */ -#define __NR_vhangup 111 /* ok */ -#define __NR_idle 112 /* remove */ -#define __NR_vm86old 113 /* remove */ -#define __NR_wait4 114 /* obsolete -> waitid */ -#define __NR_swapoff 115 /* ok */ -#define __NR_sysinfo 116 /* ok */ -#define __NR_ipc 117 /* remove - direct call */ -#define __NR_fsync 118 /* ok */ -#define __NR_sigreturn 119 /* obsolete -> sys_rt_sigreturn */ -#define __NR_clone 120 /* ok */ -#define __NR_setdomainname 121 /* ok */ -#define __NR_uname 122 /* remove */ -#define __NR_modify_ldt 123 /* remove */ -#define __NR_adjtimex 124 /* ok */ -#define __NR_mprotect 125 /* remove */ -#define __NR_sigprocmask 126 /* obsolete -> sys_rt_sigprocmask */ -#define __NR_create_module 127 /* remove */ -#define __NR_init_module 128 /* ok */ -#define __NR_delete_module 129 /* ok */ -#define __NR_get_kernel_syms 130 /* remove */ -#define __NR_quotactl 131 /* ok */ -#define __NR_getpgid 132 /* ok */ -#define __NR_fchdir 133 /* ok */ -#define __NR_bdflush 134 /* remove */ -#define __NR_sysfs 135 /* needed for busybox */ -#define __NR_personality 136 /* ok */ -#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ -#define __NR_setfsuid 138 /* ok */ -#define __NR_setfsgid 139 /* ok */ -#define __NR__llseek 140 /* remove only lseek */ -#define __NR_getdents 141 /* ok or getdents64 */ -#define __NR__newselect 142 /* remove */ -#define __NR_flock 143 /* ok */ -#define __NR_msync 144 /* remove */ -#define __NR_readv 145 /* ok */ -#define __NR_writev 146 /* ok */ -#define __NR_getsid 147 /* ok */ -#define __NR_fdatasync 148 /* ok */ -#define __NR__sysctl 149 /* remove */ -#define __NR_mlock 150 /* ok - nommu or mmu */ -#define __NR_munlock 151 /* ok - nommu or mmu */ -#define __NR_mlockall 152 /* ok - nommu or mmu */ -#define __NR_munlockall 153 /* ok - nommu or mmu */ -#define __NR_sched_setparam 154 /* ok */ -#define __NR_sched_getparam 155 /* ok */ -#define __NR_sched_setscheduler 156 /* ok */ -#define __NR_sched_getscheduler 157 /* ok */ -#define __NR_sched_yield 158 /* ok */ -#define __NR_sched_get_priority_max 159 /* ok */ -#define __NR_sched_get_priority_min 160 /* ok */ -#define __NR_sched_rr_get_interval 161 /* ok */ -#define __NR_nanosleep 162 /* ok */ -#define __NR_mremap 163 /* ok - nommu or mmu */ -#define __NR_setresuid 164 /* ok */ -#define __NR_getresuid 165 /* ok */ -#define __NR_vm86 166 /* remove */ -#define __NR_query_module 167 /* ok */ -#define __NR_poll 168 /* obsolete -> sys_ppoll */ -#define __NR_nfsservctl 169 /* ok */ -#define __NR_setresgid 170 /* ok */ -#define __NR_getresgid 171 /* ok */ -#define __NR_prctl 172 /* ok */ -#define __NR_rt_sigreturn 173 /* ok */ -#define __NR_rt_sigaction 174 /* ok */ -#define __NR_rt_sigprocmask 175 /* ok */ -#define __NR_rt_sigpending 176 /* ok */ -#define __NR_rt_sigtimedwait 177 /* ok */ -#define __NR_rt_sigqueueinfo 178 /* ok */ -#define __NR_rt_sigsuspend 179 /* ok */ -#define __NR_pread64 180 /* ok */ -#define __NR_pwrite64 181 /* ok */ -#define __NR_chown 182 /* obsolete -> fchownat */ -#define __NR_getcwd 183 /* ok */ -#define __NR_capget 184 /* ok */ -#define __NR_capset 185 /* ok */ -#define __NR_sigaltstack 186 /* remove */ -#define __NR_sendfile 187 /* ok -> exist 64bit version*/ -#define __NR_getpmsg 188 /* remove */ -/* remove - some people actually want streams */ -#define __NR_putpmsg 189 -/* for noMMU - group with clone -> maybe remove */ -#define __NR_vfork 190 -#define __NR_ugetrlimit 191 /* remove - SuS compliant getrlimit */ -#define __NR_mmap2 192 /* ok */ -#define __NR_truncate64 193 /* ok */ -#define __NR_ftruncate64 194 /* ok */ -#define __NR_stat64 195 /* remove _ARCH_WANT_STAT64 */ -#define __NR_lstat64 196 /* remove _ARCH_WANT_STAT64 */ -#define __NR_fstat64 197 /* remove _ARCH_WANT_STAT64 */ -#define __NR_lchown32 198 /* ok - without 32 */ -#define __NR_getuid32 199 /* ok - without 32 */ -#define __NR_getgid32 200 /* ok - without 32 */ -#define __NR_geteuid32 201 /* ok - without 32 */ -#define __NR_getegid32 202 /* ok - without 32 */ -#define __NR_setreuid32 203 /* ok - without 32 */ -#define __NR_setregid32 204 /* ok - without 32 */ -#define __NR_getgroups32 205 /* ok - without 32 */ -#define __NR_setgroups32 206 /* ok - without 32 */ -#define __NR_fchown32 207 /* ok - without 32 */ -#define __NR_setresuid32 208 /* ok - without 32 */ -#define __NR_getresuid32 209 /* ok - without 32 */ -#define __NR_setresgid32 210 /* ok - without 32 */ -#define __NR_getresgid32 211 /* ok - without 32 */ -#define __NR_chown32 212 /* ok - without 32 -obsolete -> fchownat */ -#define __NR_setuid32 213 /* ok - without 32 */ -#define __NR_setgid32 214 /* ok - without 32 */ -#define __NR_setfsuid32 215 /* ok - without 32 */ -#define __NR_setfsgid32 216 /* ok - without 32 */ -#define __NR_pivot_root 217 /* ok */ -#define __NR_mincore 218 /* ok */ -#define __NR_madvise 219 /* ok */ -#define __NR_getdents64 220 /* ok */ -#define __NR_fcntl64 221 /* ok */ -/* 223 is unused */ -#define __NR_gettid 224 /* ok */ -#define __NR_readahead 225 /* ok */ -#define __NR_setxattr 226 /* ok */ -#define __NR_lsetxattr 227 /* ok */ -#define __NR_fsetxattr 228 /* ok */ -#define __NR_getxattr 229 /* ok */ -#define __NR_lgetxattr 230 /* ok */ -#define __NR_fgetxattr 231 /* ok */ -#define __NR_listxattr 232 /* ok */ -#define __NR_llistxattr 233 /* ok */ -#define __NR_flistxattr 234 /* ok */ -#define __NR_removexattr 235 /* ok */ -#define __NR_lremovexattr 236 /* ok */ -#define __NR_fremovexattr 237 /* ok */ -#define __NR_tkill 238 /* ok */ -#define __NR_sendfile64 239 /* ok */ -#define __NR_futex 240 /* ok */ -#define __NR_sched_setaffinity 241 /* ok */ -#define __NR_sched_getaffinity 242 /* ok */ -#define __NR_set_thread_area 243 /* remove */ -#define __NR_get_thread_area 244 /* remove */ -#define __NR_io_setup 245 /* ok */ -#define __NR_io_destroy 246 /* ok */ -#define __NR_io_getevents 247 /* ok */ -#define __NR_io_submit 248 /* ok */ -#define __NR_io_cancel 249 /* ok */ -#define __NR_fadvise64 250 /* remove -> sys_fadvise64_64 */ -/* 251 is available for reuse (was briefly sys_set_zone_reclaim) */ -#define __NR_exit_group 252 /* ok */ -#define __NR_lookup_dcookie 253 /* ok */ -#define __NR_epoll_create 254 /* ok */ -#define __NR_epoll_ctl 255 /* ok */ -#define __NR_epoll_wait 256 /* obsolete -> sys_epoll_pwait */ -#define __NR_remap_file_pages 257 /* only for mmu */ -#define __NR_set_tid_address 258 /* ok */ -#define __NR_timer_create 259 /* ok */ -#define __NR_timer_settime (__NR_timer_create+1) /* 260 */ /* ok */ -#define __NR_timer_gettime (__NR_timer_create+2) /* 261 */ /* ok */ -#define __NR_timer_getoverrun (__NR_timer_create+3) /* 262 */ /* ok */ -#define __NR_timer_delete (__NR_timer_create+4) /* 263 */ /* ok */ -#define __NR_clock_settime (__NR_timer_create+5) /* 264 */ /* ok */ -#define __NR_clock_gettime (__NR_timer_create+6) /* 265 */ /* ok */ -#define __NR_clock_getres (__NR_timer_create+7) /* 266 */ /* ok */ -#define __NR_clock_nanosleep (__NR_timer_create+8) /* 267 */ /* ok */ -#define __NR_statfs64 268 /* ok */ -#define __NR_fstatfs64 269 /* ok */ -#define __NR_tgkill 270 /* ok */ -#define __NR_utimes 271 /* obsolete -> sys_futimesat */ -#define __NR_fadvise64_64 272 /* ok */ -#define __NR_vserver 273 /* ok */ -#define __NR_mbind 274 /* only for mmu */ -#define __NR_get_mempolicy 275 /* only for mmu */ -#define __NR_set_mempolicy 276 /* only for mmu */ -#define __NR_mq_open 277 /* ok */ -#define __NR_mq_unlink (__NR_mq_open+1) /* 278 */ /* ok */ -#define __NR_mq_timedsend (__NR_mq_open+2) /* 279 */ /* ok */ -#define __NR_mq_timedreceive (__NR_mq_open+3) /* 280 */ /* ok */ -#define __NR_mq_notify (__NR_mq_open+4) /* 281 */ /* ok */ -#define __NR_mq_getsetattr (__NR_mq_open+5) /* 282 */ /* ok */ -#define __NR_kexec_load 283 /* ok */ -#define __NR_waitid 284 /* ok */ -/* #define __NR_sys_setaltroot 285 */ -#define __NR_add_key 286 /* ok */ -#define __NR_request_key 287 /* ok */ -#define __NR_keyctl 288 /* ok */ -#define __NR_ioprio_set 289 /* ok */ -#define __NR_ioprio_get 290 /* ok */ -#define __NR_inotify_init 291 /* ok */ -#define __NR_inotify_add_watch 292 /* ok */ -#define __NR_inotify_rm_watch 293 /* ok */ -#define __NR_migrate_pages 294 /* mmu */ -#define __NR_openat 295 /* ok */ -#define __NR_mkdirat 296 /* ok */ -#define __NR_mknodat 297 /* ok */ -#define __NR_fchownat 298 /* ok */ -#define __NR_futimesat 299 /* obsolete -> sys_utimesat */ -#define __NR_fstatat64 300 /* stat64 */ -#define __NR_unlinkat 301 /* ok */ -#define __NR_renameat 302 /* ok */ -#define __NR_linkat 303 /* ok */ -#define __NR_symlinkat 304 /* ok */ -#define __NR_readlinkat 305 /* ok */ -#define __NR_fchmodat 306 /* ok */ -#define __NR_faccessat 307 /* ok */ -#define __NR_pselect6 308 /* obsolete -> sys_pselect7 */ -#define __NR_ppoll 309 /* ok */ -#define __NR_unshare 310 /* ok */ -#define __NR_set_robust_list 311 /* ok */ -#define __NR_get_robust_list 312 /* ok */ -#define __NR_splice 313 /* ok */ -#define __NR_sync_file_range 314 /* ok */ -#define __NR_tee 315 /* ok */ -#define __NR_vmsplice 316 /* ok */ -#define __NR_move_pages 317 /* mmu */ -#define __NR_getcpu 318 /* ok */ -#define __NR_epoll_pwait 319 /* ok */ -#define __NR_utimensat 320 /* ok */ -#define __NR_signalfd 321 /* ok */ -#define __NR_timerfd_create 322 /* ok */ -#define __NR_eventfd 323 /* ok */ -#define __NR_fallocate 324 /* ok */ -#define __NR_semtimedop 325 /* ok - semaphore group */ -#define __NR_timerfd_settime 326 /* ok */ -#define __NR_timerfd_gettime 327 /* ok */ -/* sysv ipc syscalls */ -#define __NR_semctl 328 /* ok */ -#define __NR_semget 329 /* ok */ -#define __NR_semop 330 /* ok */ -#define __NR_msgctl 331 /* ok */ -#define __NR_msgget 332 /* ok */ -#define __NR_msgrcv 333 /* ok */ -#define __NR_msgsnd 334 /* ok */ -#define __NR_shmat 335 /* ok */ -#define __NR_shmctl 336 /* ok */ -#define __NR_shmdt 337 /* ok */ -#define __NR_shmget 338 /* ok */ - - -#define __NR_signalfd4 339 /* new */ -#define __NR_eventfd2 340 /* new */ -#define __NR_epoll_create1 341 /* new */ -#define __NR_dup3 342 /* new */ -#define __NR_pipe2 343 /* new */ -#define __NR_inotify_init1 344 /* new */ -#define __NR_socket 345 /* new */ -#define __NR_socketpair 346 /* new */ -#define __NR_bind 347 /* new */ -#define __NR_listen 348 /* new */ -#define __NR_accept 349 /* new */ -#define __NR_connect 350 /* new */ -#define __NR_getsockname 351 /* new */ -#define __NR_getpeername 352 /* new */ -#define __NR_sendto 353 /* new */ -#define __NR_send 354 /* new */ -#define __NR_recvfrom 355 /* new */ -#define __NR_recv 356 /* new */ -#define __NR_setsockopt 357 /* new */ -#define __NR_getsockopt 358 /* new */ -#define __NR_shutdown 359 /* new */ -#define __NR_sendmsg 360 /* new */ -#define __NR_recvmsg 361 /* new */ -#define __NR_accept4 362 /* new */ -#define __NR_preadv 363 /* new */ -#define __NR_pwritev 364 /* new */ -#define __NR_rt_tgsigqueueinfo 365 /* new */ -#define __NR_perf_event_open 366 /* new */ -#define __NR_recvmmsg 367 /* new */ -#define __NR_fanotify_init 368 -#define __NR_fanotify_mark 369 -#define __NR_prlimit64 370 -#define __NR_name_to_handle_at 371 -#define __NR_open_by_handle_at 372 -#define __NR_clock_adjtime 373 -#define __NR_syncfs 374 -#define __NR_setns 375 -#define __NR_sendmmsg 376 -#define __NR_process_vm_readv 377 -#define __NR_process_vm_writev 378 +#include <uapi/asm/unistd.h> -#define __NR_syscalls 379 - -#ifdef __KERNEL__ #ifndef __ASSEMBLY__ -#define __ARCH_WANT_IPC_PARSE_VERSION /* #define __ARCH_WANT_OLD_READDIR */ /* #define __ARCH_WANT_OLD_STAT */ #define __ARCH_WANT_STAT64 #define __ARCH_WANT_SYS_ALARM #define __ARCH_WANT_SYS_GETHOSTNAME #define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_SGETMASK #define __ARCH_WANT_SYS_SIGNAL #define __ARCH_WANT_SYS_TIME #define __ARCH_WANT_SYS_UTIME @@ -421,17 +32,12 @@ #define __ARCH_WANT_SYS_OLDUMOUNT #define __ARCH_WANT_SYS_SIGPENDING #define __ARCH_WANT_SYS_SIGPROCMASK -#define __ARCH_WANT_SYS_RT_SIGACTION -#define __ARCH_WANT_SYS_RT_SIGSUSPEND - -/* - * "Conditional" syscalls - * - * What we want is __attribute__((weak,alias("sys_ni_syscall"))), - * but it doesn't work on all toolchains, so we just do it by hand - */ -#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall"); +#define __ARCH_WANT_SYS_CLONE +#define __ARCH_WANT_SYS_VFORK +#define __ARCH_WANT_SYS_FORK #endif /* __ASSEMBLY__ */ -#endif /* __KERNEL__ */ + +#define __NR_syscalls 381 + #endif /* _ASM_MICROBLAZE_UNISTD_H */ diff --git a/arch/microblaze/include/uapi/asm/Kbuild b/arch/microblaze/include/uapi/asm/Kbuild new file mode 100644 index 00000000000..1aac99f87df --- /dev/null +++ b/arch/microblaze/include/uapi/asm/Kbuild @@ -0,0 +1,36 @@ +# UAPI Header export list +include include/uapi/asm-generic/Kbuild.asm + +generic-y += types.h + +header-y += auxvec.h +header-y += bitsperlong.h +header-y += byteorder.h +header-y += elf.h +header-y += errno.h +header-y += fcntl.h +header-y += ioctl.h +header-y += ioctls.h +header-y += ipcbuf.h +header-y += kvm_para.h +header-y += mman.h +header-y += msgbuf.h +header-y += param.h +header-y += poll.h +header-y += posix_types.h +header-y += ptrace.h +header-y += resource.h +header-y += sembuf.h +header-y += setup.h +header-y += shmbuf.h +header-y += sigcontext.h +header-y += siginfo.h +header-y += signal.h +header-y += socket.h +header-y += sockios.h +header-y += stat.h +header-y += statfs.h +header-y += swab.h +header-y += termbits.h +header-y += termios.h +header-y += unistd.h diff --git a/arch/microblaze/include/asm/auxvec.h b/arch/microblaze/include/uapi/asm/auxvec.h index 8b137891791..8b137891791 100644 --- a/arch/microblaze/include/asm/auxvec.h +++ b/arch/microblaze/include/uapi/asm/auxvec.h diff --git a/arch/microblaze/include/asm/bitsperlong.h b/arch/microblaze/include/uapi/asm/bitsperlong.h index 6dc0bb0c13b..6dc0bb0c13b 100644 --- a/arch/microblaze/include/asm/bitsperlong.h +++ b/arch/microblaze/include/uapi/asm/bitsperlong.h diff --git a/arch/microblaze/include/asm/byteorder.h b/arch/microblaze/include/uapi/asm/byteorder.h index 31902762a42..31902762a42 100644 --- a/arch/microblaze/include/asm/byteorder.h +++ b/arch/microblaze/include/uapi/asm/byteorder.h diff --git a/arch/microblaze/include/uapi/asm/elf.h b/arch/microblaze/include/uapi/asm/elf.h new file mode 100644 index 00000000000..be1731d5e2f --- /dev/null +++ b/arch/microblaze/include/uapi/asm/elf.h @@ -0,0 +1,121 @@ +/* + * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu> + * Copyright (C) 2008-2009 PetaLogix + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _UAPI_ASM_MICROBLAZE_ELF_H +#define _UAPI_ASM_MICROBLAZE_ELF_H + +/* + * Note there is no "official" ELF designation for Microblaze. + * I've snaffled the value from the microblaze binutils source code + * /binutils/microblaze/include/elf/microblaze.h + */ +#define EM_MICROBLAZE 189 +#define EM_MICROBLAZE_OLD 0xbaab +#define ELF_ARCH EM_MICROBLAZE + +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(x) ((x)->e_machine == EM_MICROBLAZE \ + || (x)->e_machine == EM_MICROBLAZE_OLD) + +/* + * These are used to set parameters in the core dumps. + */ +#define ELF_CLASS ELFCLASS32 + +#ifndef __uClinux__ + +/* + * ELF register definitions.. + */ + +#include <asm/ptrace.h> +#include <asm/byteorder.h> + +#ifndef ELF_GREG_T +#define ELF_GREG_T +typedef unsigned long elf_greg_t; +#endif + +#ifndef ELF_NGREG +#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t)) +#endif + +#ifndef ELF_GREGSET_T +#define ELF_GREGSET_T +typedef elf_greg_t elf_gregset_t[ELF_NGREG]; +#endif + +#ifndef ELF_FPREGSET_T +#define ELF_FPREGSET_T + +/* TBD */ +#define ELF_NFPREG 33 /* includes fsr */ +typedef unsigned long elf_fpreg_t; +typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; + +/* typedef struct user_fpu_struct elf_fpregset_t; */ +#endif + +/* This is the location that an ET_DYN program is loaded if exec'ed. Typical + * use of this is to invoke "./ld.so someprog" to test out a new version of + * the loader. We need to make sure that it is out of the way of the program + * that it will "exec", and that there is sufficient room for the brk. + */ + +#define ELF_ET_DYN_BASE (0x08000000) + +#ifdef __MICROBLAZEEL__ +#define ELF_DATA ELFDATA2LSB +#else +#define ELF_DATA ELFDATA2MSB +#endif + +#define ELF_EXEC_PAGESIZE PAGE_SIZE + + +#define ELF_CORE_COPY_REGS(_dest, _regs) \ + memcpy((char *) &_dest, (char *) _regs, \ + sizeof(struct pt_regs)); + +/* This yields a mask that user programs can use to figure out what + * instruction set this CPU supports. This could be done in user space, + * but it's not easy, and we've already done it here. + */ +#define ELF_HWCAP (0) + +/* This yields a string that ld.so will use to load implementation + * specific libraries for optimization. This is more specific in + * intent than poking at uname or /proc/cpuinfo. + + * For the moment, we have only optimizations for the Intel generations, + * but that could change... + */ +#define ELF_PLATFORM (NULL) + +/* Added _f parameter. Is this definition correct: TBD */ +#define ELF_PLAT_INIT(_r, _f) \ +do { \ + _r->r0 = _r->r1 = _r->r2 = _r->r3 = \ + _r->r4 = _r->r5 = _r->r6 = _r->r7 = \ + _r->r8 = _r->r9 = _r->r10 = _r->r11 = \ + _r->r12 = _r->r13 = _r->r14 = _r->r15 = \ + _r->r16 = _r->r17 = _r->r18 = _r->r19 = \ + _r->r20 = _r->r21 = _r->r22 = _r->r23 = \ + _r->r24 = _r->r25 = _r->r26 = _r->r27 = \ + _r->r28 = _r->r29 = _r->r30 = _r->r31 = \ + 0; \ +} while (0) + + +#endif /* __uClinux__ */ + +#endif /* _UAPI_ASM_MICROBLAZE_ELF_H */ diff --git a/arch/microblaze/include/asm/errno.h b/arch/microblaze/include/uapi/asm/errno.h index 4c82b503d92..4c82b503d92 100644 --- a/arch/microblaze/include/asm/errno.h +++ b/arch/microblaze/include/uapi/asm/errno.h diff --git a/arch/microblaze/include/asm/fcntl.h b/arch/microblaze/include/uapi/asm/fcntl.h index 46ab12db573..46ab12db573 100644 --- a/arch/microblaze/include/asm/fcntl.h +++ b/arch/microblaze/include/uapi/asm/fcntl.h diff --git a/arch/microblaze/include/asm/ioctl.h b/arch/microblaze/include/uapi/asm/ioctl.h index b279fe06dfe..b279fe06dfe 100644 --- a/arch/microblaze/include/asm/ioctl.h +++ b/arch/microblaze/include/uapi/asm/ioctl.h diff --git a/arch/microblaze/include/asm/ioctls.h b/arch/microblaze/include/uapi/asm/ioctls.h index ec34c760665..ec34c760665 100644 --- a/arch/microblaze/include/asm/ioctls.h +++ b/arch/microblaze/include/uapi/asm/ioctls.h diff --git a/arch/microblaze/include/asm/ipcbuf.h b/arch/microblaze/include/uapi/asm/ipcbuf.h index 84c7e51cb6d..84c7e51cb6d 100644 --- a/arch/microblaze/include/asm/ipcbuf.h +++ b/arch/microblaze/include/uapi/asm/ipcbuf.h diff --git a/arch/microblaze/include/asm/kvm_para.h b/arch/microblaze/include/uapi/asm/kvm_para.h index 14fab8f0b95..14fab8f0b95 100644 --- a/arch/microblaze/include/asm/kvm_para.h +++ b/arch/microblaze/include/uapi/asm/kvm_para.h diff --git a/arch/microblaze/include/asm/mman.h b/arch/microblaze/include/uapi/asm/mman.h index 8eebf89f5ab..8eebf89f5ab 100644 --- a/arch/microblaze/include/asm/mman.h +++ b/arch/microblaze/include/uapi/asm/mman.h diff --git a/arch/microblaze/include/asm/msgbuf.h b/arch/microblaze/include/uapi/asm/msgbuf.h index 809134c644a..809134c644a 100644 --- a/arch/microblaze/include/asm/msgbuf.h +++ b/arch/microblaze/include/uapi/asm/msgbuf.h diff --git a/arch/microblaze/include/asm/param.h b/arch/microblaze/include/uapi/asm/param.h index 965d4542797..965d4542797 100644 --- a/arch/microblaze/include/asm/param.h +++ b/arch/microblaze/include/uapi/asm/param.h diff --git a/arch/microblaze/include/asm/poll.h b/arch/microblaze/include/uapi/asm/poll.h index c98509d3149..c98509d3149 100644 --- a/arch/microblaze/include/asm/poll.h +++ b/arch/microblaze/include/uapi/asm/poll.h diff --git a/arch/microblaze/include/asm/posix_types.h b/arch/microblaze/include/uapi/asm/posix_types.h index 0e15039673e..0e15039673e 100644 --- a/arch/microblaze/include/asm/posix_types.h +++ b/arch/microblaze/include/uapi/asm/posix_types.h diff --git a/arch/microblaze/include/uapi/asm/ptrace.h b/arch/microblaze/include/uapi/asm/ptrace.h new file mode 100644 index 00000000000..d31238a5f94 --- /dev/null +++ b/arch/microblaze/include/uapi/asm/ptrace.h @@ -0,0 +1,72 @@ +/* + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _UAPI_ASM_MICROBLAZE_PTRACE_H +#define _UAPI_ASM_MICROBLAZE_PTRACE_H + +#ifndef __ASSEMBLY__ + +typedef unsigned long microblaze_reg_t; + +struct pt_regs { + microblaze_reg_t r0; + microblaze_reg_t r1; + microblaze_reg_t r2; + microblaze_reg_t r3; + microblaze_reg_t r4; + microblaze_reg_t r5; + microblaze_reg_t r6; + microblaze_reg_t r7; + microblaze_reg_t r8; + microblaze_reg_t r9; + microblaze_reg_t r10; + microblaze_reg_t r11; + microblaze_reg_t r12; + microblaze_reg_t r13; + microblaze_reg_t r14; + microblaze_reg_t r15; + microblaze_reg_t r16; + microblaze_reg_t r17; + microblaze_reg_t r18; + microblaze_reg_t r19; + microblaze_reg_t r20; + microblaze_reg_t r21; + microblaze_reg_t r22; + microblaze_reg_t r23; + microblaze_reg_t r24; + microblaze_reg_t r25; + microblaze_reg_t r26; + microblaze_reg_t r27; + microblaze_reg_t r28; + microblaze_reg_t r29; + microblaze_reg_t r30; + microblaze_reg_t r31; + microblaze_reg_t pc; + microblaze_reg_t msr; + microblaze_reg_t ear; + microblaze_reg_t esr; + microblaze_reg_t fsr; + int pt_mode; +}; + +#ifndef __KERNEL__ + +/* pt_regs offsets used by gdbserver etc in ptrace syscalls */ +#define PT_GPR(n) ((n) * sizeof(microblaze_reg_t)) +#define PT_PC (32 * sizeof(microblaze_reg_t)) +#define PT_MSR (33 * sizeof(microblaze_reg_t)) +#define PT_EAR (34 * sizeof(microblaze_reg_t)) +#define PT_ESR (35 * sizeof(microblaze_reg_t)) +#define PT_FSR (36 * sizeof(microblaze_reg_t)) +#define PT_KERNEL_MODE (37 * sizeof(microblaze_reg_t)) + +#endif /* __KERNEL */ + +#endif /* __ASSEMBLY__ */ + +#endif /* _UAPI_ASM_MICROBLAZE_PTRACE_H */ diff --git a/arch/microblaze/include/asm/resource.h b/arch/microblaze/include/uapi/asm/resource.h index 04bc4db8921..04bc4db8921 100644 --- a/arch/microblaze/include/asm/resource.h +++ b/arch/microblaze/include/uapi/asm/resource.h diff --git a/arch/microblaze/include/asm/sembuf.h b/arch/microblaze/include/uapi/asm/sembuf.h index 7673b83cfef..7673b83cfef 100644 --- a/arch/microblaze/include/asm/sembuf.h +++ b/arch/microblaze/include/uapi/asm/sembuf.h diff --git a/arch/microblaze/include/uapi/asm/setup.h b/arch/microblaze/include/uapi/asm/setup.h new file mode 100644 index 00000000000..76bc2acee6a --- /dev/null +++ b/arch/microblaze/include/uapi/asm/setup.h @@ -0,0 +1,19 @@ +/* + * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu> + * Copyright (C) 2007-2009 PetaLogix + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _UAPI_ASM_MICROBLAZE_SETUP_H +#define _UAPI_ASM_MICROBLAZE_SETUP_H + +#define COMMAND_LINE_SIZE 256 + +# ifndef __ASSEMBLY__ + +# endif /* __ASSEMBLY__ */ +#endif /* _UAPI_ASM_MICROBLAZE_SETUP_H */ diff --git a/arch/microblaze/include/asm/shmbuf.h b/arch/microblaze/include/uapi/asm/shmbuf.h index 83c05fc2de3..83c05fc2de3 100644 --- a/arch/microblaze/include/asm/shmbuf.h +++ b/arch/microblaze/include/uapi/asm/shmbuf.h diff --git a/arch/microblaze/include/asm/sigcontext.h b/arch/microblaze/include/uapi/asm/sigcontext.h index 55873c80c91..55873c80c91 100644 --- a/arch/microblaze/include/asm/sigcontext.h +++ b/arch/microblaze/include/uapi/asm/sigcontext.h diff --git a/arch/microblaze/include/asm/siginfo.h b/arch/microblaze/include/uapi/asm/siginfo.h index 0815d29d82e..0815d29d82e 100644 --- a/arch/microblaze/include/asm/siginfo.h +++ b/arch/microblaze/include/uapi/asm/siginfo.h diff --git a/arch/microblaze/include/asm/signal.h b/arch/microblaze/include/uapi/asm/signal.h index 7b1573ce19d..7b1573ce19d 100644 --- a/arch/microblaze/include/asm/signal.h +++ b/arch/microblaze/include/uapi/asm/signal.h diff --git a/arch/microblaze/include/asm/socket.h b/arch/microblaze/include/uapi/asm/socket.h index 6b71384b9d8..6b71384b9d8 100644 --- a/arch/microblaze/include/asm/socket.h +++ b/arch/microblaze/include/uapi/asm/socket.h diff --git a/arch/microblaze/include/asm/sockios.h b/arch/microblaze/include/uapi/asm/sockios.h index def6d4746ee..def6d4746ee 100644 --- a/arch/microblaze/include/asm/sockios.h +++ b/arch/microblaze/include/uapi/asm/sockios.h diff --git a/arch/microblaze/include/asm/stat.h b/arch/microblaze/include/uapi/asm/stat.h index 3dc90fa92c7..3dc90fa92c7 100644 --- a/arch/microblaze/include/asm/stat.h +++ b/arch/microblaze/include/uapi/asm/stat.h diff --git a/arch/microblaze/include/asm/statfs.h b/arch/microblaze/include/uapi/asm/statfs.h index 0b91fe198c2..0b91fe198c2 100644 --- a/arch/microblaze/include/asm/statfs.h +++ b/arch/microblaze/include/uapi/asm/statfs.h diff --git a/arch/microblaze/include/asm/swab.h b/arch/microblaze/include/uapi/asm/swab.h index 7847e563ab6..7847e563ab6 100644 --- a/arch/microblaze/include/asm/swab.h +++ b/arch/microblaze/include/uapi/asm/swab.h diff --git a/arch/microblaze/include/asm/termbits.h b/arch/microblaze/include/uapi/asm/termbits.h index 3935b106de7..3935b106de7 100644 --- a/arch/microblaze/include/asm/termbits.h +++ b/arch/microblaze/include/uapi/asm/termbits.h diff --git a/arch/microblaze/include/asm/termios.h b/arch/microblaze/include/uapi/asm/termios.h index 280d78a9d96..280d78a9d96 100644 --- a/arch/microblaze/include/asm/termios.h +++ b/arch/microblaze/include/uapi/asm/termios.h diff --git a/arch/microblaze/include/uapi/asm/unistd.h b/arch/microblaze/include/uapi/asm/unistd.h new file mode 100644 index 00000000000..8d0791b49b3 --- /dev/null +++ b/arch/microblaze/include/uapi/asm/unistd.h @@ -0,0 +1,402 @@ +/* + * Copyright (C) 2007-2008 Michal Simek <monstr@monstr.eu> + * Copyright (C) 2006 Atmark Techno, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _UAPI_ASM_MICROBLAZE_UNISTD_H +#define _UAPI_ASM_MICROBLAZE_UNISTD_H + +#define __NR_restart_syscall 0 /* ok */ +#define __NR_exit 1 /* ok */ +#define __NR_fork 2 /* not for no MMU - weird */ +#define __NR_read 3 /* ok */ +#define __NR_write 4 /* ok */ +#define __NR_open 5 /* openat */ +#define __NR_close 6 /* ok */ +#define __NR_waitpid 7 /* waitid */ +#define __NR_creat 8 /* openat */ +#define __NR_link 9 /* linkat */ +#define __NR_unlink 10 /* unlinkat */ +#define __NR_execve 11 /* ok */ +#define __NR_chdir 12 /* ok */ +#define __NR_time 13 /* obsolete -> sys_gettimeofday */ +#define __NR_mknod 14 /* mknodat */ +#define __NR_chmod 15 /* fchmodat */ +#define __NR_lchown 16 /* ok */ +#define __NR_break 17 /* don't know */ +#define __NR_oldstat 18 /* remove */ +#define __NR_lseek 19 /* ok */ +#define __NR_getpid 20 /* ok */ +#define __NR_mount 21 /* ok */ +#define __NR_umount 22 /* ok */ /* use only umount2 */ +#define __NR_setuid 23 /* ok */ +#define __NR_getuid 24 /* ok */ +#define __NR_stime 25 /* obsolete -> sys_settimeofday */ +#define __NR_ptrace 26 /* ok */ +#define __NR_alarm 27 /* obsolete -> sys_setitimer */ +#define __NR_oldfstat 28 /* remove */ +#define __NR_pause 29 /* obsolete -> sys_rt_sigtimedwait */ +#define __NR_utime 30 /* obsolete -> sys_utimesat */ +#define __NR_stty 31 /* remove */ +#define __NR_gtty 32 /* remove */ +#define __NR_access 33 /* faccessat */ +/* can be implemented by sys_setpriority */ +#define __NR_nice 34 +#define __NR_ftime 35 /* remove */ +#define __NR_sync 36 /* ok */ +#define __NR_kill 37 /* ok */ +#define __NR_rename 38 /* renameat */ +#define __NR_mkdir 39 /* mkdirat */ +#define __NR_rmdir 40 /* unlinkat */ +#define __NR_dup 41 /* ok */ +#define __NR_pipe 42 /* ok */ +#define __NR_times 43 /* ok */ +#define __NR_prof 44 /* remove */ +#define __NR_brk 45 /* ok -mmu, nommu specific */ +#define __NR_setgid 46 /* ok */ +#define __NR_getgid 47 /* ok */ +#define __NR_signal 48 /* obsolete -> sys_rt_sigaction */ +#define __NR_geteuid 49 /* ok */ +#define __NR_getegid 50 /* ok */ +#define __NR_acct 51 /* add it and then I can disable it */ +#define __NR_umount2 52 /* remove */ +#define __NR_lock 53 /* remove */ +#define __NR_ioctl 54 /* ok */ +#define __NR_fcntl 55 /* ok -> 64bit version*/ +#define __NR_mpx 56 /* remove */ +#define __NR_setpgid 57 /* ok */ +#define __NR_ulimit 58 /* remove */ +#define __NR_oldolduname 59 /* remove */ +#define __NR_umask 60 /* ok */ +#define __NR_chroot 61 /* ok */ +#define __NR_ustat 62 /* obsolete -> statfs64 */ +#define __NR_dup2 63 /* ok */ +#define __NR_getppid 64 /* ok */ +#define __NR_getpgrp 65 /* obsolete -> sys_getpgid */ +#define __NR_setsid 66 /* ok */ +#define __NR_sigaction 67 /* obsolete -> rt_sigaction */ +#define __NR_sgetmask 68 /* obsolete -> sys_rt_sigprocmask */ +#define __NR_ssetmask 69 /* obsolete ->sys_rt_sigprocmask */ +#define __NR_setreuid 70 /* ok */ +#define __NR_setregid 71 /* ok */ +#define __NR_sigsuspend 72 /* obsolete -> rt_sigsuspend */ +#define __NR_sigpending 73 /* obsolete -> sys_rt_sigpending */ +#define __NR_sethostname 74 /* ok */ +#define __NR_setrlimit 75 /* ok */ +#define __NR_getrlimit 76 /* ok Back compatible 2G limited rlimit */ +#define __NR_getrusage 77 /* ok */ +#define __NR_gettimeofday 78 /* ok */ +#define __NR_settimeofday 79 /* ok */ +#define __NR_getgroups 80 /* ok */ +#define __NR_setgroups 81 /* ok */ +#define __NR_select 82 /* obsolete -> sys_pselect6 */ +#define __NR_symlink 83 /* symlinkat */ +#define __NR_oldlstat 84 /* remove */ +#define __NR_readlink 85 /* obsolete -> sys_readlinkat */ +#define __NR_uselib 86 /* remove */ +#define __NR_swapon 87 /* ok */ +#define __NR_reboot 88 /* ok */ +#define __NR_readdir 89 /* remove ? */ +#define __NR_mmap 90 /* obsolete -> sys_mmap2 */ +#define __NR_munmap 91 /* ok - mmu and nommu */ +#define __NR_truncate 92 /* ok or truncate64 */ +#define __NR_ftruncate 93 /* ok or ftruncate64 */ +#define __NR_fchmod 94 /* ok */ +#define __NR_fchown 95 /* ok */ +#define __NR_getpriority 96 /* ok */ +#define __NR_setpriority 97 /* ok */ +#define __NR_profil 98 /* remove */ +#define __NR_statfs 99 /* ok or statfs64 */ +#define __NR_fstatfs 100 /* ok or fstatfs64 */ +#define __NR_ioperm 101 /* remove */ +#define __NR_socketcall 102 /* remove */ +#define __NR_syslog 103 /* ok */ +#define __NR_setitimer 104 /* ok */ +#define __NR_getitimer 105 /* ok */ +#define __NR_stat 106 /* remove */ +#define __NR_lstat 107 /* remove */ +#define __NR_fstat 108 /* remove */ +#define __NR_olduname 109 /* remove */ +#define __NR_iopl 110 /* remove */ +#define __NR_vhangup 111 /* ok */ +#define __NR_idle 112 /* remove */ +#define __NR_vm86old 113 /* remove */ +#define __NR_wait4 114 /* obsolete -> waitid */ +#define __NR_swapoff 115 /* ok */ +#define __NR_sysinfo 116 /* ok */ +#define __NR_ipc 117 /* remove - direct call */ +#define __NR_fsync 118 /* ok */ +#define __NR_sigreturn 119 /* obsolete -> sys_rt_sigreturn */ +#define __NR_clone 120 /* ok */ +#define __NR_setdomainname 121 /* ok */ +#define __NR_uname 122 /* remove */ +#define __NR_modify_ldt 123 /* remove */ +#define __NR_adjtimex 124 /* ok */ +#define __NR_mprotect 125 /* remove */ +#define __NR_sigprocmask 126 /* obsolete -> sys_rt_sigprocmask */ +#define __NR_create_module 127 /* remove */ +#define __NR_init_module 128 /* ok */ +#define __NR_delete_module 129 /* ok */ +#define __NR_get_kernel_syms 130 /* remove */ +#define __NR_quotactl 131 /* ok */ +#define __NR_getpgid 132 /* ok */ +#define __NR_fchdir 133 /* ok */ +#define __NR_bdflush 134 /* remove */ +#define __NR_sysfs 135 /* needed for busybox */ +#define __NR_personality 136 /* ok */ +#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ +#define __NR_setfsuid 138 /* ok */ +#define __NR_setfsgid 139 /* ok */ +#define __NR__llseek 140 /* remove only lseek */ +#define __NR_getdents 141 /* ok or getdents64 */ +#define __NR__newselect 142 /* remove */ +#define __NR_flock 143 /* ok */ +#define __NR_msync 144 /* remove */ +#define __NR_readv 145 /* ok */ +#define __NR_writev 146 /* ok */ +#define __NR_getsid 147 /* ok */ +#define __NR_fdatasync 148 /* ok */ +#define __NR__sysctl 149 /* remove */ +#define __NR_mlock 150 /* ok - nommu or mmu */ +#define __NR_munlock 151 /* ok - nommu or mmu */ +#define __NR_mlockall 152 /* ok - nommu or mmu */ +#define __NR_munlockall 153 /* ok - nommu or mmu */ +#define __NR_sched_setparam 154 /* ok */ +#define __NR_sched_getparam 155 /* ok */ +#define __NR_sched_setscheduler 156 /* ok */ +#define __NR_sched_getscheduler 157 /* ok */ +#define __NR_sched_yield 158 /* ok */ +#define __NR_sched_get_priority_max 159 /* ok */ +#define __NR_sched_get_priority_min 160 /* ok */ +#define __NR_sched_rr_get_interval 161 /* ok */ +#define __NR_nanosleep 162 /* ok */ +#define __NR_mremap 163 /* ok - nommu or mmu */ +#define __NR_setresuid 164 /* ok */ +#define __NR_getresuid 165 /* ok */ +#define __NR_vm86 166 /* remove */ +#define __NR_query_module 167 /* ok */ +#define __NR_poll 168 /* obsolete -> sys_ppoll */ +#define __NR_nfsservctl 169 /* ok */ +#define __NR_setresgid 170 /* ok */ +#define __NR_getresgid 171 /* ok */ +#define __NR_prctl 172 /* ok */ +#define __NR_rt_sigreturn 173 /* ok */ +#define __NR_rt_sigaction 174 /* ok */ +#define __NR_rt_sigprocmask 175 /* ok */ +#define __NR_rt_sigpending 176 /* ok */ +#define __NR_rt_sigtimedwait 177 /* ok */ +#define __NR_rt_sigqueueinfo 178 /* ok */ +#define __NR_rt_sigsuspend 179 /* ok */ +#define __NR_pread64 180 /* ok */ +#define __NR_pwrite64 181 /* ok */ +#define __NR_chown 182 /* obsolete -> fchownat */ +#define __NR_getcwd 183 /* ok */ +#define __NR_capget 184 /* ok */ +#define __NR_capset 185 /* ok */ +#define __NR_sigaltstack 186 /* remove */ +#define __NR_sendfile 187 /* ok -> exist 64bit version*/ +#define __NR_getpmsg 188 /* remove */ +/* remove - some people actually want streams */ +#define __NR_putpmsg 189 +/* for noMMU - group with clone -> maybe remove */ +#define __NR_vfork 190 +#define __NR_ugetrlimit 191 /* remove - SuS compliant getrlimit */ +#define __NR_mmap2 192 /* ok */ +#define __NR_truncate64 193 /* ok */ +#define __NR_ftruncate64 194 /* ok */ +#define __NR_stat64 195 /* remove _ARCH_WANT_STAT64 */ +#define __NR_lstat64 196 /* remove _ARCH_WANT_STAT64 */ +#define __NR_fstat64 197 /* remove _ARCH_WANT_STAT64 */ +#define __NR_lchown32 198 /* ok - without 32 */ +#define __NR_getuid32 199 /* ok - without 32 */ +#define __NR_getgid32 200 /* ok - without 32 */ +#define __NR_geteuid32 201 /* ok - without 32 */ +#define __NR_getegid32 202 /* ok - without 32 */ +#define __NR_setreuid32 203 /* ok - without 32 */ +#define __NR_setregid32 204 /* ok - without 32 */ +#define __NR_getgroups32 205 /* ok - without 32 */ +#define __NR_setgroups32 206 /* ok - without 32 */ +#define __NR_fchown32 207 /* ok - without 32 */ +#define __NR_setresuid32 208 /* ok - without 32 */ +#define __NR_getresuid32 209 /* ok - without 32 */ +#define __NR_setresgid32 210 /* ok - without 32 */ +#define __NR_getresgid32 211 /* ok - without 32 */ +#define __NR_chown32 212 /* ok - without 32 -obsolete -> fchownat */ +#define __NR_setuid32 213 /* ok - without 32 */ +#define __NR_setgid32 214 /* ok - without 32 */ +#define __NR_setfsuid32 215 /* ok - without 32 */ +#define __NR_setfsgid32 216 /* ok - without 32 */ +#define __NR_pivot_root 217 /* ok */ +#define __NR_mincore 218 /* ok */ +#define __NR_madvise 219 /* ok */ +#define __NR_getdents64 220 /* ok */ +#define __NR_fcntl64 221 /* ok */ +/* 223 is unused */ +#define __NR_gettid 224 /* ok */ +#define __NR_readahead 225 /* ok */ +#define __NR_setxattr 226 /* ok */ +#define __NR_lsetxattr 227 /* ok */ +#define __NR_fsetxattr 228 /* ok */ +#define __NR_getxattr 229 /* ok */ +#define __NR_lgetxattr 230 /* ok */ +#define __NR_fgetxattr 231 /* ok */ +#define __NR_listxattr 232 /* ok */ +#define __NR_llistxattr 233 /* ok */ +#define __NR_flistxattr 234 /* ok */ +#define __NR_removexattr 235 /* ok */ +#define __NR_lremovexattr 236 /* ok */ +#define __NR_fremovexattr 237 /* ok */ +#define __NR_tkill 238 /* ok */ +#define __NR_sendfile64 239 /* ok */ +#define __NR_futex 240 /* ok */ +#define __NR_sched_setaffinity 241 /* ok */ +#define __NR_sched_getaffinity 242 /* ok */ +#define __NR_set_thread_area 243 /* remove */ +#define __NR_get_thread_area 244 /* remove */ +#define __NR_io_setup 245 /* ok */ +#define __NR_io_destroy 246 /* ok */ +#define __NR_io_getevents 247 /* ok */ +#define __NR_io_submit 248 /* ok */ +#define __NR_io_cancel 249 /* ok */ +#define __NR_fadvise64 250 /* remove -> sys_fadvise64_64 */ +/* 251 is available for reuse (was briefly sys_set_zone_reclaim) */ +#define __NR_exit_group 252 /* ok */ +#define __NR_lookup_dcookie 253 /* ok */ +#define __NR_epoll_create 254 /* ok */ +#define __NR_epoll_ctl 255 /* ok */ +#define __NR_epoll_wait 256 /* obsolete -> sys_epoll_pwait */ +#define __NR_remap_file_pages 257 /* only for mmu */ +#define __NR_set_tid_address 258 /* ok */ +#define __NR_timer_create 259 /* ok */ +#define __NR_timer_settime (__NR_timer_create+1) /* 260 */ /* ok */ +#define __NR_timer_gettime (__NR_timer_create+2) /* 261 */ /* ok */ +#define __NR_timer_getoverrun (__NR_timer_create+3) /* 262 */ /* ok */ +#define __NR_timer_delete (__NR_timer_create+4) /* 263 */ /* ok */ +#define __NR_clock_settime (__NR_timer_create+5) /* 264 */ /* ok */ +#define __NR_clock_gettime (__NR_timer_create+6) /* 265 */ /* ok */ +#define __NR_clock_getres (__NR_timer_create+7) /* 266 */ /* ok */ +#define __NR_clock_nanosleep (__NR_timer_create+8) /* 267 */ /* ok */ +#define __NR_statfs64 268 /* ok */ +#define __NR_fstatfs64 269 /* ok */ +#define __NR_tgkill 270 /* ok */ +#define __NR_utimes 271 /* obsolete -> sys_futimesat */ +#define __NR_fadvise64_64 272 /* ok */ +#define __NR_vserver 273 /* ok */ +#define __NR_mbind 274 /* only for mmu */ +#define __NR_get_mempolicy 275 /* only for mmu */ +#define __NR_set_mempolicy 276 /* only for mmu */ +#define __NR_mq_open 277 /* ok */ +#define __NR_mq_unlink (__NR_mq_open+1) /* 278 */ /* ok */ +#define __NR_mq_timedsend (__NR_mq_open+2) /* 279 */ /* ok */ +#define __NR_mq_timedreceive (__NR_mq_open+3) /* 280 */ /* ok */ +#define __NR_mq_notify (__NR_mq_open+4) /* 281 */ /* ok */ +#define __NR_mq_getsetattr (__NR_mq_open+5) /* 282 */ /* ok */ +#define __NR_kexec_load 283 /* ok */ +#define __NR_waitid 284 /* ok */ +/* #define __NR_sys_setaltroot 285 */ +#define __NR_add_key 286 /* ok */ +#define __NR_request_key 287 /* ok */ +#define __NR_keyctl 288 /* ok */ +#define __NR_ioprio_set 289 /* ok */ +#define __NR_ioprio_get 290 /* ok */ +#define __NR_inotify_init 291 /* ok */ +#define __NR_inotify_add_watch 292 /* ok */ +#define __NR_inotify_rm_watch 293 /* ok */ +#define __NR_migrate_pages 294 /* mmu */ +#define __NR_openat 295 /* ok */ +#define __NR_mkdirat 296 /* ok */ +#define __NR_mknodat 297 /* ok */ +#define __NR_fchownat 298 /* ok */ +#define __NR_futimesat 299 /* obsolete -> sys_utimesat */ +#define __NR_fstatat64 300 /* stat64 */ +#define __NR_unlinkat 301 /* ok */ +#define __NR_renameat 302 /* ok */ +#define __NR_linkat 303 /* ok */ +#define __NR_symlinkat 304 /* ok */ +#define __NR_readlinkat 305 /* ok */ +#define __NR_fchmodat 306 /* ok */ +#define __NR_faccessat 307 /* ok */ +#define __NR_pselect6 308 /* ok */ +#define __NR_ppoll 309 /* ok */ +#define __NR_unshare 310 /* ok */ +#define __NR_set_robust_list 311 /* ok */ +#define __NR_get_robust_list 312 /* ok */ +#define __NR_splice 313 /* ok */ +#define __NR_sync_file_range 314 /* ok */ +#define __NR_tee 315 /* ok */ +#define __NR_vmsplice 316 /* ok */ +#define __NR_move_pages 317 /* mmu */ +#define __NR_getcpu 318 /* ok */ +#define __NR_epoll_pwait 319 /* ok */ +#define __NR_utimensat 320 /* ok */ +#define __NR_signalfd 321 /* ok */ +#define __NR_timerfd_create 322 /* ok */ +#define __NR_eventfd 323 /* ok */ +#define __NR_fallocate 324 /* ok */ +#define __NR_semtimedop 325 /* ok - semaphore group */ +#define __NR_timerfd_settime 326 /* ok */ +#define __NR_timerfd_gettime 327 /* ok */ +/* sysv ipc syscalls */ +#define __NR_semctl 328 /* ok */ +#define __NR_semget 329 /* ok */ +#define __NR_semop 330 /* ok */ +#define __NR_msgctl 331 /* ok */ +#define __NR_msgget 332 /* ok */ +#define __NR_msgrcv 333 /* ok */ +#define __NR_msgsnd 334 /* ok */ +#define __NR_shmat 335 /* ok */ +#define __NR_shmctl 336 /* ok */ +#define __NR_shmdt 337 /* ok */ +#define __NR_shmget 338 /* ok */ + + +#define __NR_signalfd4 339 /* new */ +#define __NR_eventfd2 340 /* new */ +#define __NR_epoll_create1 341 /* new */ +#define __NR_dup3 342 /* new */ +#define __NR_pipe2 343 /* new */ +#define __NR_inotify_init1 344 /* new */ +#define __NR_socket 345 /* new */ +#define __NR_socketpair 346 /* new */ +#define __NR_bind 347 /* new */ +#define __NR_listen 348 /* new */ +#define __NR_accept 349 /* new */ +#define __NR_connect 350 /* new */ +#define __NR_getsockname 351 /* new */ +#define __NR_getpeername 352 /* new */ +#define __NR_sendto 353 /* new */ +#define __NR_send 354 /* new */ +#define __NR_recvfrom 355 /* new */ +#define __NR_recv 356 /* new */ +#define __NR_setsockopt 357 /* new */ +#define __NR_getsockopt 358 /* new */ +#define __NR_shutdown 359 /* new */ +#define __NR_sendmsg 360 /* new */ +#define __NR_recvmsg 361 /* new */ +#define __NR_accept4 362 /* new */ +#define __NR_preadv 363 /* new */ +#define __NR_pwritev 364 /* new */ +#define __NR_rt_tgsigqueueinfo 365 /* new */ +#define __NR_perf_event_open 366 /* new */ +#define __NR_recvmmsg 367 /* new */ +#define __NR_fanotify_init 368 +#define __NR_fanotify_mark 369 +#define __NR_prlimit64 370 +#define __NR_name_to_handle_at 371 +#define __NR_open_by_handle_at 372 +#define __NR_clock_adjtime 373 +#define __NR_syncfs 374 +#define __NR_setns 375 +#define __NR_sendmmsg 376 +#define __NR_process_vm_readv 377 +#define __NR_process_vm_writev 378 +#define __NR_kcmp 379 +#define __NR_finit_module 380 +#define __NR_sched_setattr 381 +#define __NR_sched_getattr 382 + +#endif /* _UAPI_ASM_MICROBLAZE_UNISTD_H */ diff --git a/arch/microblaze/kernel/.gitignore b/arch/microblaze/kernel/.gitignore new file mode 100644 index 00000000000..c5f676c3c22 --- /dev/null +++ b/arch/microblaze/kernel/.gitignore @@ -0,0 +1 @@ +vmlinux.lds diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile index 928c950fc14..08d50cc55e7 100644 --- a/arch/microblaze/kernel/Makefile +++ b/arch/microblaze/kernel/Makefile @@ -7,7 +7,6 @@ ifdef CONFIG_FUNCTION_TRACER CFLAGS_REMOVE_timer.o = -pg CFLAGS_REMOVE_intc.o = -pg CFLAGS_REMOVE_early_printk.o = -pg -CFLAGS_REMOVE_selfmod.o = -pg CFLAGS_REMOVE_heartbeat.o = -pg CFLAGS_REMOVE_ftrace.o = -pg CFLAGS_REMOVE_process.o = -pg @@ -17,13 +16,12 @@ extra-y := head.o vmlinux.lds obj-y += dma.o exceptions.o \ hw_exception_handler.o intc.o irq.o \ - process.o prom.o prom_parse.o ptrace.o \ + platform.o process.o prom.o prom_parse.o ptrace.o \ reset.o setup.o signal.o sys_microblaze.o timer.o traps.o unwind.o obj-y += cpu/ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -obj-$(CONFIG_SELFMOD) += selfmod.o obj-$(CONFIG_HEART_BEAT) += heartbeat.o obj-$(CONFIG_MODULES) += microblaze_ksyms.o module.o obj-$(CONFIG_MMU) += misc.o diff --git a/arch/microblaze/kernel/cpu/cache.c b/arch/microblaze/kernel/cpu/cache.c index 4b7d8a3f4ae..a6e44410672 100644 --- a/arch/microblaze/kernel/cpu/cache.c +++ b/arch/microblaze/kernel/cpu/cache.c @@ -17,82 +17,70 @@ static inline void __enable_icache_msr(void) { - __asm__ __volatile__ (" msrset r0, %0; \ - nop; " \ + __asm__ __volatile__ (" msrset r0, %0;" \ + "nop;" \ : : "i" (MSR_ICE) : "memory"); } static inline void __disable_icache_msr(void) { - __asm__ __volatile__ (" msrclr r0, %0; \ - nop; " \ + __asm__ __volatile__ (" msrclr r0, %0;" \ + "nop;" \ : : "i" (MSR_ICE) : "memory"); } static inline void __enable_dcache_msr(void) { - __asm__ __volatile__ (" msrset r0, %0; \ - nop; " \ - : \ - : "i" (MSR_DCE) \ - : "memory"); + __asm__ __volatile__ (" msrset r0, %0;" \ + "nop;" \ + : : "i" (MSR_DCE) : "memory"); } static inline void __disable_dcache_msr(void) { - __asm__ __volatile__ (" msrclr r0, %0; \ - nop; " \ - : \ - : "i" (MSR_DCE) \ - : "memory"); + __asm__ __volatile__ (" msrclr r0, %0;" \ + "nop; " \ + : : "i" (MSR_DCE) : "memory"); } static inline void __enable_icache_nomsr(void) { - __asm__ __volatile__ (" mfs r12, rmsr; \ - nop; \ - ori r12, r12, %0; \ - mts rmsr, r12; \ - nop; " \ - : \ - : "i" (MSR_ICE) \ - : "memory", "r12"); + __asm__ __volatile__ (" mfs r12, rmsr;" \ + "nop;" \ + "ori r12, r12, %0;" \ + "mts rmsr, r12;" \ + "nop;" \ + : : "i" (MSR_ICE) : "memory", "r12"); } static inline void __disable_icache_nomsr(void) { - __asm__ __volatile__ (" mfs r12, rmsr; \ - nop; \ - andi r12, r12, ~%0; \ - mts rmsr, r12; \ - nop; " \ - : \ - : "i" (MSR_ICE) \ - : "memory", "r12"); + __asm__ __volatile__ (" mfs r12, rmsr;" \ + "nop;" \ + "andi r12, r12, ~%0;" \ + "mts rmsr, r12;" \ + "nop;" \ + : : "i" (MSR_ICE) : "memory", "r12"); } static inline void __enable_dcache_nomsr(void) { - __asm__ __volatile__ (" mfs r12, rmsr; \ - nop; \ - ori r12, r12, %0; \ - mts rmsr, r12; \ - nop; " \ - : \ - : "i" (MSR_DCE) \ - : "memory", "r12"); + __asm__ __volatile__ (" mfs r12, rmsr;" \ + "nop;" \ + "ori r12, r12, %0;" \ + "mts rmsr, r12;" \ + "nop;" \ + : : "i" (MSR_DCE) : "memory", "r12"); } static inline void __disable_dcache_nomsr(void) { - __asm__ __volatile__ (" mfs r12, rmsr; \ - nop; \ - andi r12, r12, ~%0; \ - mts rmsr, r12; \ - nop; " \ - : \ - : "i" (MSR_DCE) \ - : "memory", "r12"); + __asm__ __volatile__ (" mfs r12, rmsr;" \ + "nop;" \ + "andi r12, r12, ~%0;" \ + "mts rmsr, r12;" \ + "nop;" \ + : : "i" (MSR_DCE) : "memory", "r12"); } @@ -106,7 +94,7 @@ do { \ int align = ~(cache_line_length - 1); \ end = min(start + cache_size, end); \ start &= align; \ -} while (0); +} while (0) /* * Helper macro to loop over the specified cache_size/line_length and @@ -118,12 +106,12 @@ do { \ int step = -line_length; \ WARN_ON(step >= 0); \ \ - __asm__ __volatile__ (" 1: " #op " %0, r0; \ - bgtid %0, 1b; \ - addk %0, %0, %1; \ - " : : "r" (len), "r" (step) \ + __asm__ __volatile__ (" 1: " #op " %0, r0;" \ + "bgtid %0, 1b;" \ + "addk %0, %0, %1;" \ + : : "r" (len), "r" (step) \ : "memory"); \ -} while (0); +} while (0) /* Used for wdc.flush/clear which can use rB for offset which is not possible * to use for simple wdc or wic. @@ -142,28 +130,28 @@ do { \ count = end - start; \ WARN_ON(count < 0); \ \ - __asm__ __volatile__ (" 1: " #op " %0, %1; \ - bgtid %1, 1b; \ - addk %1, %1, %2; \ - " : : "r" (start), "r" (count), \ + __asm__ __volatile__ (" 1: " #op " %0, %1;" \ + "bgtid %1, 1b;" \ + "addk %1, %1, %2;" \ + : : "r" (start), "r" (count), \ "r" (step) : "memory"); \ -} while (0); +} while (0) /* It is used only first parameter for OP - for wic, wdc */ #define CACHE_RANGE_LOOP_1(start, end, line_length, op) \ do { \ - int volatile temp; \ + int volatile temp = 0; \ int align = ~(line_length - 1); \ end = ((end & align) == end) ? end - line_length : end & align; \ WARN_ON(end - start < 0); \ \ - __asm__ __volatile__ (" 1: " #op " %1, r0; \ - cmpu %0, %1, %2; \ - bgtid %0, 1b; \ - addk %1, %1, %3; \ - " : : "r" (temp), "r" (start), "r" (end),\ + __asm__ __volatile__ (" 1: " #op " %1, r0;" \ + "cmpu %0, %1, %2;" \ + "bgtid %0, 1b;" \ + "addk %1, %1, %3;" \ + : : "r" (temp), "r" (start), "r" (end), \ "r" (line_length) : "memory"); \ -} while (0); +} while (0) #define ASM_LOOP @@ -352,7 +340,7 @@ static void __invalidate_dcache_all_noirq_wt(void) #endif pr_debug("%s\n", __func__); #ifdef ASM_LOOP - CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length, wdc) + CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length, wdc); #else for (i = 0; i < cpuinfo.dcache_size; i += cpuinfo.dcache_line_length) @@ -361,7 +349,8 @@ static void __invalidate_dcache_all_noirq_wt(void) #endif } -/* FIXME It is blindly invalidation as is expected +/* + * FIXME It is blindly invalidation as is expected * but can't be called on noMMU in microblaze_cache_init below * * MS: noMMU kernel won't boot if simple wdc is used @@ -375,7 +364,7 @@ static void __invalidate_dcache_all_wb(void) pr_debug("%s\n", __func__); #ifdef ASM_LOOP CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length, - wdc) + wdc); #else for (i = 0; i < cpuinfo.dcache_size; i += cpuinfo.dcache_line_length) @@ -616,49 +605,48 @@ static const struct scache wt_nomsr_noirq = { #define CPUVER_7_20_A 0x0c #define CPUVER_7_20_D 0x0f -#define INFO(s) printk(KERN_INFO "cache: " s "\n"); - void microblaze_cache_init(void) { if (cpuinfo.use_instr & PVR2_USE_MSR_INSTR) { if (cpuinfo.dcache_wb) { - INFO("wb_msr"); + pr_info("wb_msr\n"); mbc = (struct scache *)&wb_msr; if (cpuinfo.ver_code <= CPUVER_7_20_D) { /* MS: problem with signal handling - hw bug */ - INFO("WB won't work properly"); + pr_info("WB won't work properly\n"); } } else { if (cpuinfo.ver_code >= CPUVER_7_20_A) { - INFO("wt_msr_noirq"); + pr_info("wt_msr_noirq\n"); mbc = (struct scache *)&wt_msr_noirq; } else { - INFO("wt_msr"); + pr_info("wt_msr\n"); mbc = (struct scache *)&wt_msr; } } } else { if (cpuinfo.dcache_wb) { - INFO("wb_nomsr"); + pr_info("wb_nomsr\n"); mbc = (struct scache *)&wb_nomsr; if (cpuinfo.ver_code <= CPUVER_7_20_D) { /* MS: problem with signal handling - hw bug */ - INFO("WB won't work properly"); + pr_info("WB won't work properly\n"); } } else { if (cpuinfo.ver_code >= CPUVER_7_20_A) { - INFO("wt_nomsr_noirq"); + pr_info("wt_nomsr_noirq\n"); mbc = (struct scache *)&wt_nomsr_noirq; } else { - INFO("wt_nomsr"); + pr_info("wt_nomsr\n"); mbc = (struct scache *)&wt_nomsr; } } } -/* FIXME Invalidation is done in U-BOOT - * WT cache: Data is already written to main memory - * WB cache: Discard data on noMMU which caused that kernel doesn't boot - */ + /* + * FIXME Invalidation is done in U-BOOT + * WT cache: Data is already written to main memory + * WB cache: Discard data on noMMU which caused that kernel doesn't boot + */ /* invalidate_dcache(); */ enable_dcache(); diff --git a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c index 916aaedf194..93c26cf50de 100644 --- a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c +++ b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c @@ -27,7 +27,7 @@ early_printk("ERROR: Microblaze " x "-different for PVR and DTS\n"); #else #define err_printk(x) \ - printk(KERN_INFO "ERROR: Microblaze " x "-different for PVR and DTS\n"); + pr_info("ERROR: Microblaze " x "-different for PVR and DTS\n"); #endif void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu) @@ -38,12 +38,11 @@ void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu) CI(ver_code, VERSION); if (!ci->ver_code) { - printk(KERN_ERR "ERROR: MB has broken PVR regs " - "-> use DTS setting\n"); + pr_err("ERROR: MB has broken PVR regs -> use DTS setting\n"); return; } - temp = PVR_USE_BARREL(pvr) | PVR_USE_MSR_INSTR(pvr) |\ + temp = PVR_USE_BARREL(pvr) | PVR_USE_MSR_INSTR(pvr) | PVR_USE_PCMP_INSTR(pvr) | PVR_USE_DIV(pvr); if (ci->use_instr != temp) err_printk("BARREL, MSR, PCMP or DIV"); @@ -59,13 +58,13 @@ void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu) err_printk("HW_FPU"); ci->use_fpu = temp; - ci->use_exc = PVR_OPCODE_0x0_ILLEGAL(pvr) |\ - PVR_UNALIGNED_EXCEPTION(pvr) |\ - PVR_ILL_OPCODE_EXCEPTION(pvr) |\ - PVR_IOPB_BUS_EXCEPTION(pvr) |\ - PVR_DOPB_BUS_EXCEPTION(pvr) |\ - PVR_DIV_ZERO_EXCEPTION(pvr) |\ - PVR_FPU_EXCEPTION(pvr) |\ + ci->use_exc = PVR_OPCODE_0x0_ILLEGAL(pvr) | + PVR_UNALIGNED_EXCEPTION(pvr) | + PVR_ILL_OPCODE_EXCEPTION(pvr) | + PVR_IOPB_BUS_EXCEPTION(pvr) | + PVR_DOPB_BUS_EXCEPTION(pvr) | + PVR_DIV_ZERO_EXCEPTION(pvr) | + PVR_FPU_EXCEPTION(pvr) | PVR_FSL_EXCEPTION(pvr); CI(pvr_user1, USER1); @@ -113,7 +112,4 @@ void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu) CI(num_wr_brk, NUMBER_OF_WR_ADDR_BRK); CI(fpga_family_code, TARGET_FAMILY); - - /* take timebase-frequency from DTS */ - ci->cpu_clock_freq = fcpu(cpu, "timebase-frequency"); } diff --git a/arch/microblaze/kernel/cpu/cpuinfo-static.c b/arch/microblaze/kernel/cpu/cpuinfo-static.c index 592bb2e838c..4854285b26e 100644 --- a/arch/microblaze/kernel/cpu/cpuinfo-static.c +++ b/arch/microblaze/kernel/cpu/cpuinfo-static.c @@ -113,8 +113,6 @@ void __init set_cpuinfo_static(struct cpuinfo *ci, struct device_node *cpu) ci->num_rd_brk = fcpu(cpu, "xlnx,number-of-rd-addr-brk"); ci->num_wr_brk = fcpu(cpu, "xlnx,number-of-wr-addr-brk"); - ci->cpu_clock_freq = fcpu(cpu, "timebase-frequency"); - ci->pvr_user1 = fcpu(cpu, "xlnx,pvr-user1"); ci->pvr_user2 = fcpu(cpu, "xlnx,pvr-user2"); diff --git a/arch/microblaze/kernel/cpu/cpuinfo.c b/arch/microblaze/kernel/cpu/cpuinfo.c index eab6abf5652..234acad79b9 100644 --- a/arch/microblaze/kernel/cpu/cpuinfo.c +++ b/arch/microblaze/kernel/cpu/cpuinfo.c @@ -8,6 +8,7 @@ * for more details. */ +#include <linux/clk.h> #include <linux/init.h> #include <asm/cpuinfo.h> #include <asm/pvr.h> @@ -37,6 +38,11 @@ const struct cpu_ver_key cpu_ver_lookup[] = { {"8.20.a", 0x15}, {"8.20.b", 0x16}, {"8.30.a", 0x17}, + {"8.40.a", 0x18}, + {"8.40.b", 0x19}, + {"8.50.a", 0x1a}, + {"9.0", 0x1b}, + {"9.1", 0x1d}, {NULL, 0}, }; @@ -57,42 +63,62 @@ const struct family_string_key family_string_lookup[] = { {"virtex6", 0xe}, /* FIXME There is no key code defined for spartan2 */ {"spartan2", 0xf0}, + {"kintex7", 0x10}, + {"artix7", 0x11}, + {"zynq7000", 0x12}, {NULL, 0}, }; struct cpuinfo cpuinfo; +static struct device_node *cpu; void __init setup_cpuinfo(void) { - struct device_node *cpu = NULL; - cpu = (struct device_node *) of_find_node_by_type(NULL, "cpu"); if (!cpu) - printk(KERN_ERR "You don't have cpu!!!\n"); + pr_err("You don't have cpu!!!\n"); - printk(KERN_INFO "%s: initialising\n", __func__); + pr_info("%s: initialising\n", __func__); switch (cpu_has_pvr()) { case 0: - printk(KERN_WARNING - "%s: No PVR support. Using static CPU info from FDT\n", + pr_warn("%s: No PVR support. Using static CPU info from FDT\n", __func__); set_cpuinfo_static(&cpuinfo, cpu); break; /* FIXME I found weird behavior with MB 7.00.a/b 7.10.a * please do not use FULL PVR with MMU */ case 1: - printk(KERN_INFO "%s: Using full CPU PVR support\n", + pr_info("%s: Using full CPU PVR support\n", __func__); set_cpuinfo_static(&cpuinfo, cpu); set_cpuinfo_pvr_full(&cpuinfo, cpu); break; default: - printk(KERN_WARNING "%s: Unsupported PVR setting\n", __func__); + pr_warn("%s: Unsupported PVR setting\n", __func__); set_cpuinfo_static(&cpuinfo, cpu); } if (cpuinfo.mmu_privins) - printk(KERN_WARNING "%s: Stream instructions enabled" + pr_warn("%s: Stream instructions enabled" " - USERSPACE CAN LOCK THIS KERNEL!\n", __func__); } + +void __init setup_cpuinfo_clk(void) +{ + struct clk *clk; + + clk = of_clk_get(cpu, 0); + if (IS_ERR(clk)) { + pr_err("ERROR: CPU CCF input clock not found\n"); + /* take timebase-frequency from DTS */ + cpuinfo.cpu_clock_freq = fcpu(cpu, "timebase-frequency"); + } else { + cpuinfo.cpu_clock_freq = clk_get_rate(clk); + } + + if (!cpuinfo.cpu_clock_freq) { + pr_err("ERROR: CPU clock frequency not setup\n"); + BUG(); + } +} diff --git a/arch/microblaze/kernel/cpu/pvr.c b/arch/microblaze/kernel/cpu/pvr.c index 3a749d5e71f..8d0dc6db48c 100644 --- a/arch/microblaze/kernel/cpu/pvr.c +++ b/arch/microblaze/kernel/cpu/pvr.c @@ -27,7 +27,7 @@ tmp = 0x0; /* Prevent warning about unused */ \ __asm__ __volatile__ ( \ "mfs %0, rpvr" #pvrid ";" \ - : "=r" (tmp) : : "memory"); \ + : "=r" (tmp) : : "memory"); \ val = tmp; \ } diff --git a/arch/microblaze/kernel/dma.c b/arch/microblaze/kernel/dma.c index a2bfa2ca573..4633c36c1b3 100644 --- a/arch/microblaze/kernel/dma.c +++ b/arch/microblaze/kernel/dma.c @@ -11,24 +11,7 @@ #include <linux/gfp.h> #include <linux/dma-debug.h> #include <linux/export.h> -#include <asm/bug.h> - -/* - * Generic direct DMA implementation - * - * This implementation supports a per-device offset that can be applied if - * the address at which memory is visible to devices is not 0. Platform code - * can set archdata.dma_data to an unsigned long holding the offset. By - * default the offset is PCI_DRAM_OFFSET. - */ - -static unsigned long get_dma_direct_offset(struct device *dev) -{ - if (likely(dev)) - return (unsigned long)dev->archdata.dma_data; - - return PCI_DRAM_OFFSET; /* FIXME Not sure if is correct */ -} +#include <linux/bug.h> #define NOT_COHERENT_CACHE @@ -51,7 +34,7 @@ static void *dma_direct_alloc_coherent(struct device *dev, size_t size, return NULL; ret = page_address(page); memset(ret, 0, size); - *dma_handle = virt_to_phys(ret) + get_dma_direct_offset(dev); + *dma_handle = virt_to_phys(ret); return ret; #endif @@ -77,7 +60,7 @@ static int dma_direct_map_sg(struct device *dev, struct scatterlist *sgl, /* FIXME this part of code is untested */ for_each_sg(sgl, sg, nents, i) { - sg->dma_address = sg_phys(sg) + get_dma_direct_offset(dev); + sg->dma_address = sg_phys(sg); __dma_sync(page_to_phys(sg_page(sg)) + sg->offset, sg->length, direction); } @@ -85,12 +68,6 @@ static int dma_direct_map_sg(struct device *dev, struct scatterlist *sgl, return nents; } -static void dma_direct_unmap_sg(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction direction, - struct dma_attrs *attrs) -{ -} - static int dma_direct_dma_supported(struct device *dev, u64 mask) { return 1; @@ -104,7 +81,7 @@ static inline dma_addr_t dma_direct_map_page(struct device *dev, struct dma_attrs *attrs) { __dma_sync(page_to_phys(page) + offset, size, direction); - return page_to_phys(page) + offset + get_dma_direct_offset(dev); + return page_to_phys(page) + offset; } static inline void dma_direct_unmap_page(struct device *dev, @@ -181,7 +158,6 @@ struct dma_map_ops dma_direct_ops = { .alloc = dma_direct_alloc_coherent, .free = dma_direct_free_coherent, .map_sg = dma_direct_map_sg, - .unmap_sg = dma_direct_unmap_sg, .dma_supported = dma_direct_dma_supported, .map_page = dma_direct_map_page, .unmap_page = dma_direct_unmap_page, @@ -197,8 +173,8 @@ EXPORT_SYMBOL(dma_direct_ops); static int __init dma_init(void) { - dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES); + dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES); - return 0; + return 0; } fs_initcall(dma_init); diff --git a/arch/microblaze/kernel/early_printk.c b/arch/microblaze/kernel/early_printk.c index aba1f9a97d5..365f2d53f1b 100644 --- a/arch/microblaze/kernel/early_printk.c +++ b/arch/microblaze/kernel/early_printk.c @@ -21,7 +21,6 @@ #include <asm/setup.h> #include <asm/prom.h> -static u32 early_console_initialized; static u32 base_addr; #ifdef CONFIG_SERIAL_UARTLITE_CONSOLE @@ -109,27 +108,11 @@ static struct console early_serial_uart16550_console = { }; #endif /* CONFIG_SERIAL_8250_CONSOLE */ -static struct console *early_console; - -void early_printk(const char *fmt, ...) -{ - char buf[512]; - int n; - va_list ap; - - if (early_console_initialized) { - va_start(ap, fmt); - n = vscnprintf(buf, 512, fmt, ap); - early_console->write(early_console, buf, n); - va_end(ap); - } -} - int __init setup_early_printk(char *opt) { int version = 0; - if (early_console_initialized) + if (early_console) return 1; base_addr = of_early_console(&version); @@ -140,26 +123,25 @@ int __init setup_early_printk(char *opt) switch (version) { #ifdef CONFIG_SERIAL_UARTLITE_CONSOLE case UARTLITE: - printk(KERN_INFO "Early console on uartlite " - "at 0x%08x\n", base_addr); + pr_info("Early console on uartlite at 0x%08x\n", + base_addr); early_console = &early_serial_uartlite_console; break; #endif #ifdef CONFIG_SERIAL_8250_CONSOLE case UART16550: - printk(KERN_INFO "Early console on uart16650 " - "at 0x%08x\n", base_addr); + pr_info("Early console on uart16650 at 0x%08x\n", + base_addr); early_console = &early_serial_uart16550_console; break; #endif default: - printk(KERN_INFO "Unsupported early console %d\n", + pr_info("Unsupported early console %d\n", version); return 1; } register_console(early_console); - early_console_initialized = 1; return 0; } return 1; @@ -169,12 +151,11 @@ int __init setup_early_printk(char *opt) * only for early console because of performance degression */ void __init remap_early_printk(void) { - if (!early_console_initialized || !early_console) + if (!early_console) return; - printk(KERN_INFO "early_printk_console remapping from 0x%x to ", - base_addr); + pr_info("early_printk_console remapping from 0x%x to ", base_addr); base_addr = (u32) ioremap(base_addr, PAGE_SIZE); - printk(KERN_CONT "0x%x\n", base_addr); + pr_cont("0x%x\n", base_addr); #ifdef CONFIG_MMU /* @@ -195,9 +176,9 @@ void __init remap_early_printk(void) void __init disable_early_printk(void) { - if (!early_console_initialized || !early_console) + if (!early_console) return; - printk(KERN_WARNING "disabling early console\n"); + pr_warn("disabling early console\n"); unregister_console(early_console); - early_console_initialized = 0; + early_console = NULL; } diff --git a/arch/microblaze/kernel/entry-nommu.S b/arch/microblaze/kernel/entry-nommu.S index 75c3ea1f48a..7e394fc2c43 100644 --- a/arch/microblaze/kernel/entry-nommu.S +++ b/arch/microblaze/kernel/entry-nommu.S @@ -124,6 +124,7 @@ ret_from_intr: lwi r11, r1, PT_MODE bneid r11, no_intr_resched +3: lwi r6, r31, TS_THREAD_INFO /* get thread info */ lwi r19, r6, TI_FLAGS /* get flags in thread info */ /* do an extra work if any bits are set */ @@ -132,11 +133,13 @@ ret_from_intr: beqi r11, 1f bralid r15, schedule nop + bri 3b 1: andi r11, r19, _TIF_SIGPENDING | _TIF_NOTIFY_RESUME beqid r11, no_intr_resched addk r5, r1, r0 bralid r15, do_notify_resume addk r6, r0, r0 + bri 3b no_intr_resched: /* Disable interrupts, we are now committed to the state restore */ @@ -280,6 +283,7 @@ ENTRY(_user_exception) /* Figure out which function to use for this system call. */ /* Note Microblaze barrel shift is optional, so don't rely on it */ add r12, r12, r12 /* convert num -> ptr */ + addik r30, r0, 1 /* restarts allowed */ add r12, r12, r12 lwi r12, r12, sys_call_table /* Get function pointer */ addik r15, r0, ret_to_user-8 /* set return address */ @@ -369,6 +373,7 @@ ENTRY(_debug_exception) bralid r15, send_sig add r7, r0, r0 /* 3rd param zero */ + addik r30, r0, 1 /* restarts allowed ??? */ /* Restore r3/r4 to work around how ret_to_user works */ lwi r3, r1, PT_R3 lwi r4, r1, PT_R4 @@ -465,7 +470,6 @@ ENTRY(_switch_to) ENTRY(ret_from_fork) addk r5, r0, r3 - addk r6, r0, r1 brlid r15, schedule_tail nop swi r31, r1, PT_R31 /* save r31 in user context. */ @@ -474,19 +478,35 @@ ENTRY(ret_from_fork) brid ret_to_user nop +ENTRY(ret_from_kernel_thread) + brlid r15, schedule_tail + addk r5, r0, r3 + brald r15, r20 + addk r5, r0, r19 + brid ret_to_user + addk r3, r0, r0 + work_pending: + lwi r11, r1, PT_MODE + bneid r11, 2f +3: enable_irq - andi r11, r19, _TIF_NEED_RESCHED beqi r11, 1f bralid r15, schedule nop + bri 4f 1: andi r11, r19, _TIF_SIGPENDING | _TIF_NOTIFY_RESUME beqi r11, no_work_pending - addk r5, r1, r0 + addk r5, r30, r0 bralid r15, do_notify_resume addik r6, r0, 1 - bri no_work_pending + addk r30, r0, r0 /* no restarts from now on */ +4: + disable_irq + lwi r6, r31, TS_THREAD_INFO /* get thread info */ + lwi r19, r6, TI_FLAGS /* get flags in thread info */ + bri 3b ENTRY(ret_to_user) disable_irq @@ -500,6 +520,7 @@ ENTRY(ret_to_user) no_work_pending: disable_irq +2: /* save r31 */ swi r31, r0, PER_CPU(CURRENT_SAVE) /* save mode indicator */ @@ -551,19 +572,8 @@ no_work_pending: rtid r14, 0 nop -sys_vfork: - brid microblaze_vfork - addk r5, r1, r0 - -sys_clone: - brid microblaze_clone - addk r7, r1, r0 - -sys_execve: - brid microblaze_execve - addk r8, r1, r0 - sys_rt_sigreturn_wrapper: + addk r30, r0, r0 /* no restarts for this one */ brid sys_rt_sigreturn addk r5, r1, r0 diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S index 03f7b8ce6b6..0536bc021cc 100644 --- a/arch/microblaze/kernel/entry.S +++ b/arch/microblaze/kernel/entry.S @@ -293,24 +293,6 @@ C_ENTRY(_user_exception): swi r1, r0, TOPHYS(PER_CPU(ENTRY_SP)) /* save stack */ addi r14, r14, 4 /* return address is 4 byte after call */ - mfs r1, rmsr - nop - andi r1, r1, MSR_UMS - bnei r1, 1f - -/* Kernel-mode state save - kernel execve */ - lwi r1, r0, TOPHYS(PER_CPU(ENTRY_SP)); /* Reload kernel stack-ptr*/ - tophys(r1,r1); - - addik r1, r1, -PT_SIZE; /* Make room on the stack. */ - SAVE_REGS - - swi r1, r1, PT_MODE; /* pt_regs -> kernel mode */ - brid 2f; - nop; /* Fill delay slot */ - -/* User-mode state save. */ -1: lwi r1, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */ tophys(r1,r1); lwi r1, r1, TS_THREAD_INFO; /* get stack from task_struct */ @@ -372,6 +354,7 @@ C_ENTRY(_user_exception): /* Note Microblaze barrel shift is optional, so don't rely on it */ add r12, r12, r12; /* convert num -> ptr */ add r12, r12, r12; + addi r30, r0, 1 /* restarts allowed */ #ifdef DEBUG /* Trac syscalls and stored them to syscall_debug_table */ @@ -419,26 +402,27 @@ C_ENTRY(ret_from_trap): * trigger rescheduling. */ /* get thread info from current task */ lwi r11, CURRENT_TASK, TS_THREAD_INFO; - lwi r11, r11, TI_FLAGS; /* get flags in thread info */ - andi r11, r11, _TIF_NEED_RESCHED; + lwi r19, r11, TI_FLAGS; /* get flags in thread info */ + andi r11, r19, _TIF_NEED_RESCHED; beqi r11, 5f; bralid r15, schedule; /* Call scheduler */ nop; /* delay slot */ + bri 1b /* Maybe handle a signal */ -5: /* get thread info from current task*/ - lwi r11, CURRENT_TASK, TS_THREAD_INFO; - lwi r11, r11, TI_FLAGS; /* get flags in thread info */ - andi r11, r11, _TIF_SIGPENDING | _TIF_NOTIFY_RESUME; - beqi r11, 1f; /* Signals to handle, handle them */ +5: + andi r11, r19, _TIF_SIGPENDING | _TIF_NOTIFY_RESUME; + beqi r11, 4f; /* Signals to handle, handle them */ addik r5, r1, 0; /* Arg 1: struct pt_regs *regs */ bralid r15, do_notify_resume; /* Handle any signals */ - addi r6, r0, 1; /* Arg 2: int in_syscall */ + add r6, r30, r0; /* Arg 2: int in_syscall */ + add r30, r0, r0 /* no more restarts */ + bri 1b /* Finally, return to user state. */ -1: set_bip; /* Ints masked for state restore */ +4: set_bip; /* Ints masked for state restore */ swi CURRENT_TASK, r0, PER_CPU(CURRENT_SAVE); /* save current */ VM_OFF; tophys(r1,r1); @@ -460,18 +444,6 @@ TRAP_return: /* Make global symbol for debugging */ nop; -/* These syscalls need access to the struct pt_regs on the stack, so we - implement them in assembly (they're basically all wrappers anyway). */ - -C_ENTRY(sys_fork_wrapper): - addi r5, r0, SIGCHLD /* Arg 0: flags */ - lwi r6, r1, PT_R1 /* Arg 1: child SP (use parent's) */ - addik r7, r1, 0 /* Arg 2: parent context */ - add r8, r0, r0 /* Arg 3: (unused) */ - add r9, r0, r0; /* Arg 4: (unused) */ - brid do_fork /* Do real work (tail-call) */ - add r10, r0, r0; /* Arg 5: (unused) */ - /* This the initial entry point for a new child thread, with an appropriate stack in place that makes it look the the child is in the middle of an syscall. This function is actually `returned to' from switch_thread @@ -479,30 +451,22 @@ C_ENTRY(sys_fork_wrapper): saved context). */ C_ENTRY(ret_from_fork): bralid r15, schedule_tail; /* ...which is schedule_tail's arg */ - add r3, r5, r0; /* switch_thread returns the prev task */ + add r5, r3, r0; /* switch_thread returns the prev task */ /* ( in the delay slot ) */ brid ret_from_trap; /* Do normal trap return */ add r3, r0, r0; /* Child's fork call should return 0. */ -C_ENTRY(sys_vfork): - brid microblaze_vfork /* Do real work (tail-call) */ - addik r5, r1, 0 - -C_ENTRY(sys_clone): - bnei r6, 1f; /* See if child SP arg (arg 1) is 0. */ - lwi r6, r1, PT_R1; /* If so, use paret's stack ptr */ -1: addik r7, r1, 0; /* Arg 2: parent context */ - lwi r9, r1, PT_R8; /* parent tid. */ - lwi r10, r1, PT_R9; /* child tid. */ - /* do_fork will pick up TLS from regs->r10. */ - brid do_fork /* Do real work (tail-call) */ - add r8, r0, r0; /* Arg 3: (unused) */ - -C_ENTRY(sys_execve): - brid microblaze_execve; /* Do real work (tail-call).*/ - addik r8, r1, 0; /* add user context as 4th arg */ +C_ENTRY(ret_from_kernel_thread): + bralid r15, schedule_tail; /* ...which is schedule_tail's arg */ + add r5, r3, r0; /* switch_thread returns the prev task */ + /* ( in the delay slot ) */ + brald r15, r20 /* fn was left in r20 */ + addk r5, r0, r19 /* ... and argument - in r19 */ + brid ret_from_trap + add r3, r0, r0 C_ENTRY(sys_rt_sigreturn_wrapper): + addik r30, r0, 0 /* no restarts */ brid sys_rt_sigreturn /* Do real work */ addik r5, r1, 0; /* add user context as 1st arg */ @@ -610,20 +574,20 @@ C_ENTRY(ret_from_exc): /* We're returning to user mode, so check for various conditions that trigger rescheduling. */ +1: lwi r11, CURRENT_TASK, TS_THREAD_INFO; /* get thread info */ - lwi r11, r11, TI_FLAGS; /* get flags in thread info */ - andi r11, r11, _TIF_NEED_RESCHED; + lwi r19, r11, TI_FLAGS; /* get flags in thread info */ + andi r11, r19, _TIF_NEED_RESCHED; beqi r11, 5f; /* Call the scheduler before returning from a syscall/trap. */ bralid r15, schedule; /* Call scheduler */ nop; /* delay slot */ + bri 1b /* Maybe handle a signal */ -5: lwi r11, CURRENT_TASK, TS_THREAD_INFO; /* get thread info */ - lwi r11, r11, TI_FLAGS; /* get flags in thread info */ - andi r11, r11, _TIF_SIGPENDING | _TIF_NOTIFY_RESUME; - beqi r11, 1f; /* Signals to handle, handle them */ +5: andi r11, r19, _TIF_SIGPENDING | _TIF_NOTIFY_RESUME; + beqi r11, 4f; /* Signals to handle, handle them */ /* * Handle a signal return; Pending signals should be in r18. @@ -639,9 +603,10 @@ C_ENTRY(ret_from_exc): addik r5, r1, 0; /* Arg 1: struct pt_regs *regs */ bralid r15, do_notify_resume; /* Handle any signals */ addi r6, r0, 0; /* Arg 2: int in_syscall */ + bri 1b /* Finally, return to user state. */ -1: set_bip; /* Ints masked for state restore */ +4: set_bip; /* Ints masked for state restore */ swi CURRENT_TASK, r0, PER_CPU(CURRENT_SAVE); /* save current */ VM_OFF; tophys(r1,r1); @@ -721,22 +686,23 @@ ret_from_irq: lwi r11, r1, PT_MODE; bnei r11, 2f; +1: lwi r11, CURRENT_TASK, TS_THREAD_INFO; - lwi r11, r11, TI_FLAGS; /* MS: get flags from thread info */ - andi r11, r11, _TIF_NEED_RESCHED; + lwi r19, r11, TI_FLAGS; /* MS: get flags from thread info */ + andi r11, r19, _TIF_NEED_RESCHED; beqi r11, 5f bralid r15, schedule; nop; /* delay slot */ + bri 1b /* Maybe handle a signal */ -5: lwi r11, CURRENT_TASK, TS_THREAD_INFO; /* MS: get thread info */ - lwi r11, r11, TI_FLAGS; /* get flags in thread info */ - andi r11, r11, _TIF_SIGPENDING | _TIF_NOTIFY_RESUME; +5: andi r11, r19, _TIF_SIGPENDING | _TIF_NOTIFY_RESUME; beqid r11, no_intr_resched /* Handle a signal return; Pending signals should be in r18. */ addik r5, r1, 0; /* Arg 1: struct pt_regs *regs */ bralid r15, do_notify_resume; /* Handle any signals */ addi r6, r0, 0; /* Arg 2: int in_syscall */ + bri 1b /* Finally, return to user state. */ no_intr_resched: @@ -854,28 +820,29 @@ dbtrap_call: /* Return point for kernel/user entry + 8 because of rtsd r15, 8 */ lwi r11, r1, PT_MODE; bnei r11, 2f; /* MS: Return to user space - gdb */ +1: /* Get current task ptr into r11 */ lwi r11, CURRENT_TASK, TS_THREAD_INFO; /* get thread info */ - lwi r11, r11, TI_FLAGS; /* get flags in thread info */ - andi r11, r11, _TIF_NEED_RESCHED; + lwi r19, r11, TI_FLAGS; /* get flags in thread info */ + andi r11, r19, _TIF_NEED_RESCHED; beqi r11, 5f; /* Call the scheduler before returning from a syscall/trap. */ bralid r15, schedule; /* Call scheduler */ nop; /* delay slot */ + bri 1b /* Maybe handle a signal */ -5: lwi r11, CURRENT_TASK, TS_THREAD_INFO; /* get thread info */ - lwi r11, r11, TI_FLAGS; /* get flags in thread info */ - andi r11, r11, _TIF_SIGPENDING | _TIF_NOTIFY_RESUME; - beqi r11, 1f; /* Signals to handle, handle them */ +5: andi r11, r19, _TIF_SIGPENDING | _TIF_NOTIFY_RESUME; + beqi r11, 4f; /* Signals to handle, handle them */ addik r5, r1, 0; /* Arg 1: struct pt_regs *regs */ bralid r15, do_notify_resume; /* Handle any signals */ addi r6, r0, 0; /* Arg 2: int in_syscall */ + bri 1b /* Finally, return to user state. */ -1: swi CURRENT_TASK, r0, PER_CPU(CURRENT_SAVE); /* save current */ +4: swi CURRENT_TASK, r0, PER_CPU(CURRENT_SAVE); /* save current */ VM_OFF; tophys(r1,r1); /* MS: Restore all regs */ diff --git a/arch/microblaze/kernel/exceptions.c b/arch/microblaze/kernel/exceptions.c index 6348dc82f42..42dd12a62ff 100644 --- a/arch/microblaze/kernel/exceptions.c +++ b/arch/microblaze/kernel/exceptions.c @@ -13,11 +13,11 @@ * This file handles the architecture-dependent parts of hardware exceptions */ +#include <linux/export.h> #include <linux/kernel.h> #include <linux/signal.h> #include <linux/sched.h> #include <linux/kallsyms.h> -#include <linux/module.h> #include <asm/exceptions.h> #include <asm/entry.h> /* For KM CPU var */ @@ -40,7 +40,7 @@ void die(const char *str, struct pt_regs *fp, long err) { console_verbose(); spin_lock_irq(&die_lock); - printk(KERN_WARNING "Oops: %s, sig: %ld\n", str, err); + pr_warn("Oops: %s, sig: %ld\n", str, err); show_regs(fp); spin_unlock_irq(&die_lock); /* do_exit() should take care of panic'ing from an interrupt @@ -61,9 +61,9 @@ void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr) { siginfo_t info; - if (kernel_mode(regs)) { + if (kernel_mode(regs)) die("Exception in kernel mode", regs, signr); - } + info.si_signo = signr; info.si_errno = 0; info.si_code = code; @@ -79,8 +79,7 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type, #endif #if 0 - printk(KERN_WARNING "Exception %02x in %s mode, FSR=%08x PC=%08x " \ - "ESR=%08x\n", + pr_warn("Exception %02x in %s mode, FSR=%08x PC=%08x ESR=%08x\n", type, user_mode(regs) ? "user" : "kernel", fsr, (unsigned int) regs->pc, (unsigned int) regs->esr); #endif @@ -92,8 +91,7 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type, _exception(SIGILL, regs, ILL_ILLOPC, addr); return; } - printk(KERN_WARNING "Illegal opcode exception " \ - "in kernel mode.\n"); + pr_warn("Illegal opcode exception in kernel mode.\n"); die("opcode exception", regs, SIGBUS); break; case MICROBLAZE_IBUS_EXCEPTION: @@ -102,8 +100,7 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type, _exception(SIGBUS, regs, BUS_ADRERR, addr); return; } - printk(KERN_WARNING "Instruction bus error exception " \ - "in kernel mode.\n"); + pr_warn("Instruction bus error exception in kernel mode.\n"); die("bus exception", regs, SIGBUS); break; case MICROBLAZE_DBUS_EXCEPTION: @@ -112,8 +109,7 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type, _exception(SIGBUS, regs, BUS_ADRERR, addr); return; } - printk(KERN_WARNING "Data bus error exception " \ - "in kernel mode.\n"); + pr_warn("Data bus error exception in kernel mode.\n"); die("bus exception", regs, SIGBUS); break; case MICROBLAZE_DIV_ZERO_EXCEPTION: @@ -122,8 +118,7 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type, _exception(SIGFPE, regs, FPE_INTDIV, addr); return; } - printk(KERN_WARNING "Divide by zero exception " \ - "in kernel mode.\n"); + pr_warn("Divide by zero exception in kernel mode.\n"); die("Divide by zero exception", regs, SIGBUS); break; case MICROBLAZE_FPU_EXCEPTION: @@ -151,8 +146,8 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type, #endif default: /* FIXME what to do in unexpected exception */ - printk(KERN_WARNING "Unexpected exception %02x " - "PC=%08x in %s mode\n", type, (unsigned int) addr, + pr_warn("Unexpected exception %02x PC=%08x in %s mode\n", + type, (unsigned int) addr, kernel_mode(regs) ? "kernel" : "user"); } return; diff --git a/arch/microblaze/kernel/ftrace.c b/arch/microblaze/kernel/ftrace.c index 357d56abe24..bbcd2533766 100644 --- a/arch/microblaze/kernel/ftrace.c +++ b/arch/microblaze/kernel/ftrace.c @@ -35,18 +35,18 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr) * happen. This tool is too much intrusive to * ignore such a protection. */ - asm volatile(" 1: lwi %0, %2, 0; \ - 2: swi %3, %2, 0; \ - addik %1, r0, 0; \ - 3: \ - .section .fixup, \"ax\"; \ - 4: brid 3b; \ - addik %1, r0, 1; \ - .previous; \ - .section __ex_table,\"a\"; \ - .word 1b,4b; \ - .word 2b,4b; \ - .previous;" \ + asm volatile(" 1: lwi %0, %2, 0;" \ + "2: swi %3, %2, 0;" \ + " addik %1, r0, 0;" \ + "3:" \ + " .section .fixup, \"ax\";" \ + "4: brid 3b;" \ + " addik %1, r0, 1;" \ + " .previous;" \ + " .section __ex_table,\"a\";" \ + " .word 1b,4b;" \ + " .word 2b,4b;" \ + " .previous;" \ : "=&r" (old), "=r" (faulted) : "r" (parent), "r" (return_hooker) ); @@ -81,16 +81,16 @@ static int ftrace_modify_code(unsigned long addr, unsigned int value) { int faulted = 0; - __asm__ __volatile__(" 1: swi %2, %1, 0; \ - addik %0, r0, 0; \ - 2: \ - .section .fixup, \"ax\"; \ - 3: brid 2b; \ - addik %0, r0, 1; \ - .previous; \ - .section __ex_table,\"a\"; \ - .word 1b,3b; \ - .previous;" \ + __asm__ __volatile__(" 1: swi %2, %1, 0;" \ + " addik %0, r0, 0;" \ + "2:" \ + " .section .fixup, \"ax\";" \ + "3: brid 2b;" \ + " addik %0, r0, 1;" \ + " .previous;" \ + " .section __ex_table,\"a\";" \ + " .word 1b,3b;" \ + " .previous;" \ : "=r" (faulted) : "r" (addr), "r" (value) ); @@ -171,11 +171,8 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) return ret; } -int __init ftrace_dyn_arch_init(void *data) +int __init ftrace_dyn_arch_init(void) { - /* The return code is retured via data */ - *(unsigned long *)data = 0; - return 0; } diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S index 98b17f9f904..4655ff342c6 100644 --- a/arch/microblaze/kernel/head.S +++ b/arch/microblaze/kernel/head.S @@ -64,6 +64,10 @@ real_start: #endif mts rmsr, r0 +/* Disable stack protection from bootloader */ + mts rslr, r0 + addi r8, r0, 0xFFFFFFFF + mts rshr, r8 /* * According to Xilinx, msrclr instruction behaves like 'mfs rX,rpc' * if the msrclr instruction is not enabled. We use this to detect @@ -109,31 +113,35 @@ no_fdt_arg: #ifndef CONFIG_CMDLINE_BOOL /* * handling command line - * copy command line to __init_end. There is space for storing command line. + * copy command line directly to cmd_line placed in data section. */ - or r6, r0, r0 /* incremment */ - ori r4, r0, __init_end /* load address of command line */ + beqid r5, skip /* Skip if NULL pointer */ + or r11, r0, r0 /* incremment */ + ori r4, r0, cmd_line /* load address of command line */ tophys(r4,r4) /* convert to phys address */ ori r3, r0, COMMAND_LINE_SIZE - 1 /* number of loops */ _copy_command_line: - lbu r2, r5, r6 /* r2=r5+r6 - r5 contain pointer to command line */ - sb r2, r4, r6 /* addr[r4+r6]= r2*/ - addik r6, r6, 1 /* increment counting */ + /* r2=r5+r6 - r5 contain pointer to command line */ + lbu r2, r5, r11 + beqid r2, skip /* Skip if no data */ + sb r2, r4, r11 /* addr[r4+r6]= r2 */ + addik r11, r11, 1 /* increment counting */ bgtid r3, _copy_command_line /* loop for all entries */ - addik r3, r3, -1 /* descrement loop */ + addik r3, r3, -1 /* decrement loop */ addik r5, r4, 0 /* add new space for command line */ tovirt(r5,r5) +skip: #endif /* CONFIG_CMDLINE_BOOL */ #ifdef NOT_COMPILE /* save bram context */ - or r6, r0, r0 /* incremment */ + or r11, r0, r0 /* incremment */ ori r4, r0, TOPHYS(_bram_load_start) /* save bram context */ ori r3, r0, (LMB_SIZE - 4) _copy_bram: - lw r7, r0, r6 /* r7 = r0 + r6 */ - sw r7, r4, r6 /* addr[r4 + r6] = r7*/ - addik r6, r6, 4 /* increment counting */ + lw r7, r0, r11 /* r7 = r0 + r6 */ + sw r7, r4, r11 /* addr[r4 + r6] = r7 */ + addik r11, r11, 4 /* increment counting */ bgtid r3, _copy_bram /* loop for all entries */ addik r3, r3, -4 /* descrement loop */ #endif @@ -172,7 +180,7 @@ _invalidate: /* start to do TLB calculation */ addik r12, r0, _end rsub r12, r3, r12 - addik r12, r12, CONFIG_KERNEL_PAD /* that's the pad */ + addik r12, r12, CONFIG_LOWMEM_SIZE >> PTE_SHIFT /* that's the pad */ or r9, r0, r0 /* TLB0 = 0 */ or r10, r0, r0 /* TLB1 = 0 */ @@ -197,7 +205,7 @@ GT4: /* r11 contains the rest - will be either 1 or 4 */ GT16: /* TLB0 is 16MB */ addik r9, r0, 0x1000000 /* means TLB0 is 16MB */ TLB1: - /* must be used r2 because of substract if failed */ + /* must be used r2 because of subtract if failed */ addik r2, r11, -0x0400000 bgei r2, GT20 /* size is greater than 16MB */ /* size is >16MB and <20MB */ @@ -299,8 +307,8 @@ jump_over2: * the exception vectors, using a 4k real==virtual mapping. */ /* Use temporary TLB_ID for LMB - clear this temporary mapping later */ - ori r6, r0, MICROBLAZE_LMB_TLB_ID - mts rtlbx,r6 + ori r11, r0, MICROBLAZE_LMB_TLB_ID + mts rtlbx,r11 ori r4,r0,(TLB_WR | TLB_EX) ori r3,r0,(TLB_VALID | TLB_PAGESZ(PAGESZ_4K)) diff --git a/arch/microblaze/kernel/heartbeat.c b/arch/microblaze/kernel/heartbeat.c index 154756f3c69..4643e3ab941 100644 --- a/arch/microblaze/kernel/heartbeat.c +++ b/arch/microblaze/kernel/heartbeat.c @@ -17,7 +17,7 @@ static unsigned int base_addr; -void heartbeat(void) +void microblaze_heartbeat(void) { static unsigned int cnt, period, dist; @@ -42,7 +42,7 @@ void heartbeat(void) } } -void setup_heartbeat(void) +void microblaze_setup_heartbeat(void) { struct device_node *gpio = NULL; int *prop; @@ -61,7 +61,7 @@ void setup_heartbeat(void) if (gpio) { base_addr = be32_to_cpup(of_get_property(gpio, "reg", NULL)); base_addr = (unsigned long) ioremap(base_addr, PAGE_SIZE); - printk(KERN_NOTICE "Heartbeat GPIO at 0x%x\n", base_addr); + pr_notice("Heartbeat GPIO at 0x%x\n", base_addr); /* GPIO is configured as output */ prop = (int *) of_get_property(gpio, "xlnx,is-bidir", NULL); diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S index aa510f450ac..0b11a4469de 100644 --- a/arch/microblaze/kernel/hw_exception_handler.S +++ b/arch/microblaze/kernel/hw_exception_handler.S @@ -75,6 +75,7 @@ #include <asm/mmu.h> #include <asm/pgtable.h> #include <asm/signal.h> +#include <asm/registers.h> #include <asm/asm-offsets.h> #undef DEBUG @@ -146,15 +147,14 @@ or r3, r0, NUM_TO_REG (regnum); /* Shift right instruction depending on available configuration */ - #if CONFIG_XILINX_MICROBLAZE0_USE_BARREL > 0 - #define BSRLI(rD, rA, imm) \ - bsrli rD, rA, imm - #else - #define BSRLI(rD, rA, imm) BSRLI ## imm (rD, rA) + #if CONFIG_XILINX_MICROBLAZE0_USE_BARREL == 0 /* Only the used shift constants defined here - add more if needed */ #define BSRLI2(rD, rA) \ srl rD, rA; /* << 1 */ \ srl rD, rD; /* << 2 */ + #define BSRLI4(rD, rA) \ + BSRLI2(rD, rA); \ + BSRLI2(rD, rD) #define BSRLI10(rD, rA) \ srl rD, rA; /* << 1 */ \ srl rD, rD; /* << 2 */ \ @@ -169,7 +169,33 @@ #define BSRLI20(rD, rA) \ BSRLI10(rD, rA); \ BSRLI10(rD, rD) + + .macro bsrli, rD, rA, IMM + .if (\IMM) == 2 + BSRLI2(\rD, \rA) + .elseif (\IMM) == 10 + BSRLI10(\rD, \rA) + .elseif (\IMM) == 12 + BSRLI2(\rD, \rA) + BSRLI10(\rD, \rD) + .elseif (\IMM) == 14 + BSRLI4(\rD, \rA) + BSRLI10(\rD, \rD) + .elseif (\IMM) == 20 + BSRLI20(\rD, \rA) + .elseif (\IMM) == 24 + BSRLI4(\rD, \rA) + BSRLI20(\rD, \rD) + .elseif (\IMM) == 28 + BSRLI4(\rD, \rA) + BSRLI4(\rD, \rD) + BSRLI20(\rD, \rD) + .else + .error "BSRLI shift macros \IMM" + .endif + .endm #endif + #endif /* CONFIG_MMU */ .extern other_exception_handler /* Defined in exception.c */ @@ -192,8 +218,8 @@ * - W S REG EXC * * - * STACK FRAME STRUCTURE (for NO_MMU) - * --------------------------------- + * STACK FRAME STRUCTURE (for CONFIG_MMU=n) + * ---------------------------------------- * * +-------------+ + 0 * | MSR | @@ -581,7 +607,7 @@ ex_handler_done: * tried to access a kernel or read-protected page - always * a SEGV). All other faults here must be stores, so no * need to check ESR_S as well. */ - andi r4, r4, 0x800 /* ESR_Z - zone protection */ + andi r4, r4, ESR_DIZ /* ESR_Z - zone protection */ bnei r4, ex2 ori r4, r0, swapper_pg_dir @@ -595,25 +621,25 @@ ex_handler_done: * tried to access a kernel or read-protected page - always * a SEGV). All other faults here must be stores, so no * need to check ESR_S as well. */ - andi r4, r4, 0x800 /* ESR_Z */ + andi r4, r4, ESR_DIZ /* ESR_Z */ bnei r4, ex2 /* get current task address */ addi r4 ,CURRENT_TASK, TOPHYS(0); lwi r4, r4, TASK_THREAD+PGDIR ex4: tophys(r4,r4) - BSRLI(r5,r3,20) /* Create L1 (pgdir/pmd) address */ - andi r5, r5, 0xffc + /* Create L1 (pgdir/pmd) address */ + bsrli r5, r3, PGDIR_SHIFT - 2 + andi r5, r5, PAGE_SIZE - 4 /* Assume pgdir aligned on 4K boundary, no need for "andi r4,r4,0xfffff003" */ or r4, r4, r5 lwi r4, r4, 0 /* Get L1 entry */ - andi r5, r4, 0xfffff000 /* Extract L2 (pte) base address */ + andi r5, r4, PAGE_MASK /* Extract L2 (pte) base address */ beqi r5, ex2 /* Bail if no table */ tophys(r5,r5) - BSRLI(r6,r3,10) /* Compute PTE address */ - andi r6, r6, 0xffc - andi r5, r5, 0xfffff003 + bsrli r6, r3, PTE_SHIFT /* Compute PTE address */ + andi r6, r6, PAGE_SIZE - 4 or r5, r5, r6 lwi r4, r5, 0 /* Get Linux PTE */ @@ -632,7 +658,9 @@ ex_handler_done: * Many of these bits are software only. Bits we don't set * here we (properly should) assume have the appropriate value. */ - andni r4, r4, 0x0ce2 /* Make sure 20, 21 are zero */ +/* Ignore memory coherent, just LSB on ZSEL is used + EX/WR */ + andi r4, r4, PAGE_MASK | TLB_EX | TLB_WR | \ + TLB_ZSEL(1) | TLB_ATTR_MASK ori r4, r4, _PAGE_HWEXEC /* make it executable */ /* find the TLB index that caused the fault. It has to be here*/ @@ -701,18 +729,18 @@ ex_handler_done: lwi r4, r4, TASK_THREAD+PGDIR ex6: tophys(r4,r4) - BSRLI(r5,r3,20) /* Create L1 (pgdir/pmd) address */ - andi r5, r5, 0xffc + /* Create L1 (pgdir/pmd) address */ + bsrli r5, r3, PGDIR_SHIFT - 2 + andi r5, r5, PAGE_SIZE - 4 /* Assume pgdir aligned on 4K boundary, no need for "andi r4,r4,0xfffff003" */ or r4, r4, r5 lwi r4, r4, 0 /* Get L1 entry */ - andi r5, r4, 0xfffff000 /* Extract L2 (pte) base address */ + andi r5, r4, PAGE_MASK /* Extract L2 (pte) base address */ beqi r5, ex7 /* Bail if no table */ tophys(r5,r5) - BSRLI(r6,r3,10) /* Compute PTE address */ - andi r6, r6, 0xffc - andi r5, r5, 0xfffff003 + bsrli r6, r3, PTE_SHIFT /* Compute PTE address */ + andi r6, r6, PAGE_SIZE - 4 or r5, r5, r6 lwi r4, r5, 0 /* Get Linux PTE */ @@ -731,7 +759,8 @@ ex_handler_done: * here we (properly should) assume have the appropriate value. */ brid finish_tlb_load - andni r4, r4, 0x0ce2 /* Make sure 20, 21 are zero */ + andi r4, r4, PAGE_MASK | TLB_EX | TLB_WR | \ + TLB_ZSEL(1) | TLB_ATTR_MASK ex7: /* The bailout. Restore registers to pre-exception conditions * and call the heavyweights to help us out. @@ -771,18 +800,18 @@ ex_handler_done: lwi r4, r4, TASK_THREAD+PGDIR ex9: tophys(r4,r4) - BSRLI(r5,r3,20) /* Create L1 (pgdir/pmd) address */ - andi r5, r5, 0xffc + /* Create L1 (pgdir/pmd) address */ + bsrli r5, r3, PGDIR_SHIFT - 2 + andi r5, r5, PAGE_SIZE - 4 /* Assume pgdir aligned on 4K boundary, no need for "andi r4,r4,0xfffff003" */ or r4, r4, r5 lwi r4, r4, 0 /* Get L1 entry */ - andi r5, r4, 0xfffff000 /* Extract L2 (pte) base address */ + andi r5, r4, PAGE_MASK /* Extract L2 (pte) base address */ beqi r5, ex10 /* Bail if no table */ tophys(r5,r5) - BSRLI(r6,r3,10) /* Compute PTE address */ - andi r6, r6, 0xffc - andi r5, r5, 0xfffff003 + bsrli r6, r3, PTE_SHIFT /* Compute PTE address */ + andi r6, r6, PAGE_SIZE - 4 or r5, r5, r6 lwi r4, r5, 0 /* Get Linux PTE */ @@ -801,7 +830,8 @@ ex_handler_done: * here we (properly should) assume have the appropriate value. */ brid finish_tlb_load - andni r4, r4, 0x0ce2 /* Make sure 20, 21 are zero */ + andi r4, r4, PAGE_MASK | TLB_EX | TLB_WR | \ + TLB_ZSEL(1) | TLB_ATTR_MASK ex10: /* The bailout. Restore registers to pre-exception conditions * and call the heavyweights to help us out. @@ -854,8 +884,14 @@ ex_handler_done: * set of bits. These are size, valid, E, U0, and ensure * bits 20 and 21 are zero. */ - andi r3, r3, 0xfffff000 - ori r3, r3, 0x0c0 + andi r3, r3, PAGE_MASK +#ifdef CONFIG_MICROBLAZE_64K_PAGES + ori r3, r3, TLB_VALID | TLB_PAGESZ(PAGESZ_64K) +#elif CONFIG_MICROBLAZE_16K_PAGES + ori r3, r3, TLB_VALID | TLB_PAGESZ(PAGESZ_16K) +#else + ori r3, r3, TLB_VALID | TLB_PAGESZ(PAGESZ_4K) +#endif mts rtlbhi, r3 /* Load TLB HI */ nop @@ -911,7 +947,7 @@ ex_handler_done: .ent _unaligned_data_exception _unaligned_data_exception: andi r8, r3, 0x3E0; /* Mask and extract the register operand */ - BSRLI(r8,r8,2); /* r8 >> 2 = register operand * 8 */ + bsrli r8, r8, 2; /* r8 >> 2 = register operand * 8 */ andi r6, r3, 0x400; /* Extract ESR[S] */ bneid r6, ex_sw_vm; andi r6, r3, 0x800; /* Extract ESR[W] - delay slot */ diff --git a/arch/microblaze/kernel/intc.c b/arch/microblaze/kernel/intc.c index 6c54d4dcdec..15c7c12ea0e 100644 --- a/arch/microblaze/kernel/intc.c +++ b/arch/microblaze/kernel/intc.c @@ -1,5 +1,6 @@ /* - * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu> + * Copyright (C) 2007-2013 Michal Simek <monstr@monstr.eu> + * Copyright (C) 2012-2013 Xilinx, Inc. * Copyright (C) 2007-2009 PetaLogix * Copyright (C) 2006 Atmark Techno, Inc. * @@ -8,23 +9,15 @@ * for more details. */ -#include <linux/init.h> #include <linux/irqdomain.h> #include <linux/irq.h> -#include <asm/page.h> +#include <linux/of_address.h> #include <linux/io.h> #include <linux/bug.h> -#include <asm/prom.h> -#include <asm/irq.h> +#include "../../drivers/irqchip/irqchip.h" -#ifdef CONFIG_SELFMOD_INTC -#include <asm/selfmod.h> -#define INTC_BASE BARRIER_BASE_ADDR -#else -static unsigned int intc_baseaddr; -#define INTC_BASE intc_baseaddr -#endif +static void __iomem *intc_baseaddr; /* No one else should require these constants, so define them locally here. */ #define ISR 0x00 /* Interrupt Status Register */ @@ -39,31 +32,55 @@ static unsigned int intc_baseaddr; #define MER_ME (1<<0) #define MER_HIE (1<<1) +static unsigned int (*read_fn)(void __iomem *); +static void (*write_fn)(u32, void __iomem *); + +static void intc_write32(u32 val, void __iomem *addr) +{ + iowrite32(val, addr); +} + +static unsigned int intc_read32(void __iomem *addr) +{ + return ioread32(addr); +} + +static void intc_write32_be(u32 val, void __iomem *addr) +{ + iowrite32be(val, addr); +} + +static unsigned int intc_read32_be(void __iomem *addr) +{ + return ioread32be(addr); +} + static void intc_enable_or_unmask(struct irq_data *d) { unsigned long mask = 1 << d->hwirq; pr_debug("enable_or_unmask: %ld\n", d->hwirq); - out_be32(INTC_BASE + SIE, mask); /* ack level irqs because they can't be acked during * ack function since the handle_level_irq function * acks the irq before calling the interrupt handler */ if (irqd_is_level_type(d)) - out_be32(INTC_BASE + IAR, mask); + write_fn(mask, intc_baseaddr + IAR); + + write_fn(mask, intc_baseaddr + SIE); } static void intc_disable_or_mask(struct irq_data *d) { pr_debug("disable: %ld\n", d->hwirq); - out_be32(INTC_BASE + CIE, 1 << d->hwirq); + write_fn(1 << d->hwirq, intc_baseaddr + CIE); } static void intc_ack(struct irq_data *d) { pr_debug("ack: %ld\n", d->hwirq); - out_be32(INTC_BASE + IAR, 1 << d->hwirq); + write_fn(1 << d->hwirq, intc_baseaddr + IAR); } static void intc_mask_ack(struct irq_data *d) @@ -71,8 +88,8 @@ static void intc_mask_ack(struct irq_data *d) unsigned long mask = 1 << d->hwirq; pr_debug("disable_and_ack: %ld\n", d->hwirq); - out_be32(INTC_BASE + CIE, mask); - out_be32(INTC_BASE + IAR, mask); + write_fn(mask, intc_baseaddr + CIE); + write_fn(mask, intc_baseaddr + IAR); } static struct irq_chip intc_dev = { @@ -89,7 +106,7 @@ unsigned int get_irq(void) { unsigned int hwirq, irq = -1; - hwirq = in_be32(INTC_BASE + IVR); + hwirq = read_fn(intc_baseaddr + IVR); if (hwirq != -1U) irq = irq_find_mapping(root_domain, hwirq); @@ -98,7 +115,7 @@ unsigned int get_irq(void) return irq; } -int xintc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw) +static int xintc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw) { u32 intr_mask = (u32)d->host_data; @@ -119,56 +136,62 @@ static const struct irq_domain_ops xintc_irq_domain_ops = { .map = xintc_map, }; -void __init init_IRQ(void) +static int __init xilinx_intc_of_init(struct device_node *intc, + struct device_node *parent) { u32 nr_irq, intr_mask; - struct device_node *intc = NULL; -#ifdef CONFIG_SELFMOD_INTC - unsigned int intc_baseaddr = 0; - static int arr_func[] = { - (int)&get_irq, - (int)&intc_enable_or_unmask, - (int)&intc_disable_or_mask, - (int)&intc_mask_ack, - (int)&intc_ack, - (int)&intc_end, - 0 - }; -#endif - intc = of_find_compatible_node(NULL, NULL, "xlnx,xps-intc-1.00.a"); - BUG_ON(!intc); - - intc_baseaddr = be32_to_cpup(of_get_property(intc, "reg", NULL)); - intc_baseaddr = (unsigned long) ioremap(intc_baseaddr, PAGE_SIZE); - nr_irq = be32_to_cpup(of_get_property(intc, - "xlnx,num-intr-inputs", NULL)); - - intr_mask = - be32_to_cpup(of_get_property(intc, "xlnx,kind-of-intr", NULL)); + int ret; + + intc_baseaddr = of_iomap(intc, 0); + BUG_ON(!intc_baseaddr); + + ret = of_property_read_u32(intc, "xlnx,num-intr-inputs", &nr_irq); + if (ret < 0) { + pr_err("%s: unable to read xlnx,num-intr-inputs\n", __func__); + return -EINVAL; + } + + ret = of_property_read_u32(intc, "xlnx,kind-of-intr", &intr_mask); + if (ret < 0) { + pr_err("%s: unable to read xlnx,kind-of-intr\n", __func__); + return -EINVAL; + } + if (intr_mask > (u32)((1ULL << nr_irq) - 1)) - printk(KERN_INFO " ERROR: Mismatch in kind-of-intr param\n"); + pr_info(" ERROR: Mismatch in kind-of-intr param\n"); -#ifdef CONFIG_SELFMOD_INTC - selfmod_function((int *) arr_func, intc_baseaddr); -#endif - printk(KERN_INFO "%s #0 at 0x%08x, num_irq=%d, edge=0x%x\n", - intc->name, intc_baseaddr, nr_irq, intr_mask); + pr_info("%s: num_irq=%d, edge=0x%x\n", + intc->full_name, nr_irq, intr_mask); + + write_fn = intc_write32; + read_fn = intc_read32; /* * Disable all external interrupts until they are * explicity requested. */ - out_be32(intc_baseaddr + IER, 0); + write_fn(0, intc_baseaddr + IER); /* Acknowledge any pending interrupts just in case. */ - out_be32(intc_baseaddr + IAR, 0xffffffff); + write_fn(0xffffffff, intc_baseaddr + IAR); /* Turn on the Master Enable. */ - out_be32(intc_baseaddr + MER, MER_HIE | MER_ME); + write_fn(MER_HIE | MER_ME, intc_baseaddr + MER); + if (!(read_fn(intc_baseaddr + MER) & (MER_HIE | MER_ME))) { + write_fn = intc_write32_be; + read_fn = intc_read32_be; + write_fn(MER_HIE | MER_ME, intc_baseaddr + MER); + } /* Yeah, okay, casting the intr_mask to a void* is butt-ugly, but I'm * lazy and Michal can clean it up to something nicer when he tests * and commits this patch. ~~gcl */ root_domain = irq_domain_add_linear(intc, nr_irq, &xintc_irq_domain_ops, (void *)intr_mask); + + irq_set_default_host(root_domain); + + return 0; } + +IRQCHIP_DECLARE(xilinx_intc, "xlnx,xps-intc-1.00.a", xilinx_intc_of_init); diff --git a/arch/microblaze/kernel/irq.c b/arch/microblaze/kernel/irq.c index ace700afbfd..11e24de91aa 100644 --- a/arch/microblaze/kernel/irq.c +++ b/arch/microblaze/kernel/irq.c @@ -17,10 +17,8 @@ #include <linux/seq_file.h> #include <linux/kernel_stat.h> #include <linux/irq.h> +#include <linux/irqchip.h> #include <linux/of_irq.h> -#include <linux/export.h> - -#include <asm/prom.h> static u32 concurrent_irq; @@ -47,3 +45,9 @@ next_irq: set_irq_regs(old_regs); trace_hardirqs_on(); } + +void __init init_IRQ(void) +{ + /* process the entire interrupt tree in one go */ + irqchip_init(); +} diff --git a/arch/microblaze/kernel/microblaze_ksyms.c b/arch/microblaze/kernel/microblaze_ksyms.c index bb4907c828d..9f1d02c4c5c 100644 --- a/arch/microblaze/kernel/microblaze_ksyms.c +++ b/arch/microblaze/kernel/microblaze_ksyms.c @@ -7,7 +7,7 @@ * published by the Free Software Foundation. */ -#include <linux/module.h> +#include <linux/export.h> #include <linux/string.h> #include <linux/cryptohash.h> #include <linux/delay.h> @@ -21,9 +21,6 @@ #include <linux/ftrace.h> #include <linux/uaccess.h> -extern char *_ebss; -EXPORT_SYMBOL_GPL(_ebss); - #ifdef CONFIG_FUNCTION_TRACER extern void _mcount(void); EXPORT_SYMBOL(_mcount); diff --git a/arch/microblaze/kernel/module.c b/arch/microblaze/kernel/module.c index f39257a5abc..182e6be856c 100644 --- a/arch/microblaze/kernel/module.c +++ b/arch/microblaze/kernel/module.c @@ -7,7 +7,7 @@ * published by the Free Software Foundation. */ -#include <linux/module.h> +#include <linux/export.h> #include <linux/moduleloader.h> #include <linux/kernel.h> #include <linux/elf.h> @@ -108,8 +108,7 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, break; default: - printk(KERN_ERR "module %s: " - "Unknown relocation: %u\n", + pr_err("module %s: Unknown relocation: %u\n", module->name, ELF32_R_TYPE(rela[i].r_info)); return -ENOEXEC; diff --git a/arch/microblaze/platform/platform.c b/arch/microblaze/kernel/platform.c index b9529caa507..b9529caa507 100644 --- a/arch/microblaze/platform/platform.c +++ b/arch/microblaze/kernel/platform.c diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c index 1944e00f07e..b2dd37196b3 100644 --- a/arch/microblaze/kernel/process.c +++ b/arch/microblaze/kernel/process.c @@ -8,157 +8,82 @@ * for more details. */ -#include <linux/module.h> +#include <linux/cpu.h> +#include <linux/export.h> #include <linux/sched.h> #include <linux/pm.h> #include <linux/tick.h> #include <linux/bitops.h> +#include <linux/ptrace.h> #include <asm/pgalloc.h> -#include <asm/uaccess.h> /* for USER_DS macros */ +#include <linux/uaccess.h> /* for USER_DS macros */ #include <asm/cacheflush.h> void show_regs(struct pt_regs *regs) { - printk(KERN_INFO " Registers dump: mode=%X\r\n", regs->pt_mode); - printk(KERN_INFO " r1=%08lX, r2=%08lX, r3=%08lX, r4=%08lX\n", + show_regs_print_info(KERN_INFO); + + pr_info(" Registers dump: mode=%X\r\n", regs->pt_mode); + pr_info(" r1=%08lX, r2=%08lX, r3=%08lX, r4=%08lX\n", regs->r1, regs->r2, regs->r3, regs->r4); - printk(KERN_INFO " r5=%08lX, r6=%08lX, r7=%08lX, r8=%08lX\n", + pr_info(" r5=%08lX, r6=%08lX, r7=%08lX, r8=%08lX\n", regs->r5, regs->r6, regs->r7, regs->r8); - printk(KERN_INFO " r9=%08lX, r10=%08lX, r11=%08lX, r12=%08lX\n", + pr_info(" r9=%08lX, r10=%08lX, r11=%08lX, r12=%08lX\n", regs->r9, regs->r10, regs->r11, regs->r12); - printk(KERN_INFO " r13=%08lX, r14=%08lX, r15=%08lX, r16=%08lX\n", + pr_info(" r13=%08lX, r14=%08lX, r15=%08lX, r16=%08lX\n", regs->r13, regs->r14, regs->r15, regs->r16); - printk(KERN_INFO " r17=%08lX, r18=%08lX, r19=%08lX, r20=%08lX\n", + pr_info(" r17=%08lX, r18=%08lX, r19=%08lX, r20=%08lX\n", regs->r17, regs->r18, regs->r19, regs->r20); - printk(KERN_INFO " r21=%08lX, r22=%08lX, r23=%08lX, r24=%08lX\n", + pr_info(" r21=%08lX, r22=%08lX, r23=%08lX, r24=%08lX\n", regs->r21, regs->r22, regs->r23, regs->r24); - printk(KERN_INFO " r25=%08lX, r26=%08lX, r27=%08lX, r28=%08lX\n", + pr_info(" r25=%08lX, r26=%08lX, r27=%08lX, r28=%08lX\n", regs->r25, regs->r26, regs->r27, regs->r28); - printk(KERN_INFO " r29=%08lX, r30=%08lX, r31=%08lX, rPC=%08lX\n", + pr_info(" r29=%08lX, r30=%08lX, r31=%08lX, rPC=%08lX\n", regs->r29, regs->r30, regs->r31, regs->pc); - printk(KERN_INFO " msr=%08lX, ear=%08lX, esr=%08lX, fsr=%08lX\n", + pr_info(" msr=%08lX, ear=%08lX, esr=%08lX, fsr=%08lX\n", regs->msr, regs->ear, regs->esr, regs->fsr); } -void (*pm_idle)(void); void (*pm_power_off)(void) = NULL; EXPORT_SYMBOL(pm_power_off); -static int hlt_counter = 1; - -void disable_hlt(void) -{ - hlt_counter++; -} -EXPORT_SYMBOL(disable_hlt); - -void enable_hlt(void) -{ - hlt_counter--; -} -EXPORT_SYMBOL(enable_hlt); - -static int __init nohlt_setup(char *__unused) -{ - hlt_counter = 1; - return 1; -} -__setup("nohlt", nohlt_setup); - -static int __init hlt_setup(char *__unused) -{ - hlt_counter = 0; - return 1; -} -__setup("hlt", hlt_setup); - -void default_idle(void) -{ - if (likely(hlt_counter)) { - local_irq_disable(); - stop_critical_timings(); - cpu_relax(); - start_critical_timings(); - local_irq_enable(); - } else { - clear_thread_flag(TIF_POLLING_NRFLAG); - smp_mb__after_clear_bit(); - local_irq_disable(); - while (!need_resched()) - cpu_sleep(); - local_irq_enable(); - set_thread_flag(TIF_POLLING_NRFLAG); - } -} - -void cpu_idle(void) -{ - set_thread_flag(TIF_POLLING_NRFLAG); - - /* endless idle loop with no priority at all */ - while (1) { - void (*idle)(void) = pm_idle; - - if (!idle) - idle = default_idle; - - tick_nohz_idle_enter(); - rcu_idle_enter(); - while (!need_resched()) - idle(); - rcu_idle_exit(); - tick_nohz_idle_exit(); - - schedule_preempt_disabled(); - check_pgt_cache(); - } -} - void flush_thread(void) { } int copy_thread(unsigned long clone_flags, unsigned long usp, - unsigned long unused, - struct task_struct *p, struct pt_regs *regs) + unsigned long arg, struct task_struct *p) { struct pt_regs *childregs = task_pt_regs(p); struct thread_info *ti = task_thread_info(p); - *childregs = *regs; - if (user_mode(regs)) + if (unlikely(p->flags & PF_KTHREAD)) { + /* if we're creating a new kernel thread then just zeroing all + * the registers. That's OK for a brand new thread.*/ + memset(childregs, 0, sizeof(struct pt_regs)); + memset(&ti->cpu_context, 0, sizeof(struct cpu_context)); + ti->cpu_context.r1 = (unsigned long)childregs; + ti->cpu_context.r20 = (unsigned long)usp; /* fn */ + ti->cpu_context.r19 = (unsigned long)arg; + childregs->pt_mode = 1; + local_save_flags(childregs->msr); +#ifdef CONFIG_MMU + ti->cpu_context.msr = childregs->msr & ~MSR_IE; +#endif + ti->cpu_context.r15 = (unsigned long)ret_from_kernel_thread - 8; + return 0; + } + *childregs = *current_pt_regs(); + if (usp) childregs->r1 = usp; - else - childregs->r1 = ((unsigned long) ti) + THREAD_SIZE; -#ifndef CONFIG_MMU memset(&ti->cpu_context, 0, sizeof(struct cpu_context)); ti->cpu_context.r1 = (unsigned long)childregs; +#ifndef CONFIG_MMU ti->cpu_context.msr = (unsigned long)childregs->msr; #else + childregs->msr |= MSR_UMS; - /* if creating a kernel thread then update the current reg (we don't - * want to use the parent's value when restoring by POP_STATE) */ - if (kernel_mode(regs)) - /* save new current on stack to use POP_STATE */ - childregs->CURRENT_TASK = (unsigned long)p; - /* if returning to user then use the parent's value of this register */ - - /* if we're creating a new kernel thread then just zeroing all - * the registers. That's OK for a brand new thread.*/ - /* Pls. note that some of them will be restored in POP_STATE */ - if (kernel_mode(regs)) - memset(&ti->cpu_context, 0, sizeof(struct cpu_context)); - /* if this thread is created for fork/vfork/clone, then we want to - * restore all the parent's context */ - /* in addition to the registers which will be restored by POP_STATE */ - else { - ti->cpu_context = *(struct cpu_context *)regs; - childregs->msr |= MSR_UMS; - } - - /* FIXME STATE_SAVE_PT_OFFSET; */ - ti->cpu_context.r1 = (unsigned long)childregs; /* we should consider the fact that childregs is a copy of the parent * regs which were saved immediately after entering the kernel state * before enabling VM. This MSR will be restored in switch_to and @@ -169,7 +94,6 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, * excepting for VM and UMS * don't touch UMS , CARRY and cache bits * right now MSR is a copy of parent one */ - childregs->msr |= MSR_BIP; childregs->msr &= ~MSR_EIP; childregs->msr |= MSR_IE; childregs->msr &= ~MSR_VM; @@ -209,29 +133,6 @@ unsigned long thread_saved_pc(struct task_struct *tsk) } #endif -static void kernel_thread_helper(int (*fn)(void *), void *arg) -{ - fn(arg); - do_exit(-1); -} - -int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags) -{ - struct pt_regs regs; - - memset(®s, 0, sizeof(regs)); - /* store them in non-volatile registers */ - regs.r5 = (unsigned long)fn; - regs.r6 = (unsigned long)arg; - local_save_flags(regs.msr); - regs.pc = (unsigned long)kernel_thread_helper; - regs.pt_mode = 1; - - return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, - ®s, 0, NULL, NULL); -} -EXPORT_SYMBOL_GPL(kernel_thread); - unsigned long get_wchan(struct task_struct *p) { /* TBD (used by procfs) */ @@ -246,6 +147,7 @@ void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp) regs->pt_mode = 0; #ifdef CONFIG_MMU regs->msr |= MSR_UMS; + regs->msr &= ~MSR_VM; #endif } @@ -259,3 +161,8 @@ int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpregs) return 0; /* MicroBlaze has no separate FPU registers */ } #endif /* CONFIG_MMU */ + +void arch_cpu_idle(void) +{ + local_irq_enable(); +} diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c index 4a764ccb9f2..68f099960eb 100644 --- a/arch/microblaze/kernel/prom.c +++ b/arch/microblaze/kernel/prom.c @@ -14,6 +14,7 @@ */ #include <stdarg.h> +#include <linux/export.h> #include <linux/kernel.h> #include <linux/string.h> #include <linux/init.h> @@ -25,11 +26,11 @@ #include <linux/delay.h> #include <linux/initrd.h> #include <linux/bitops.h> -#include <linux/module.h> #include <linux/kexec.h> #include <linux/debugfs.h> #include <linux/irq.h> #include <linux/memblock.h> +#include <linux/of_fdt.h> #include <asm/prom.h> #include <asm/page.h> @@ -41,24 +42,14 @@ #include <asm/sections.h> #include <asm/pci-bridge.h> -void __init early_init_dt_add_memory_arch(u64 base, u64 size) -{ - memblock_add(base, size); -} - -void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align) -{ - return __va(memblock_alloc(size, align)); -} - #ifdef CONFIG_EARLY_PRINTK -char *stdout; +static const char *stdout; -int __init early_init_dt_scan_chosen_serial(unsigned long node, +static int __init early_init_dt_scan_chosen_serial(unsigned long node, const char *uname, int depth, void *data) { - unsigned long l; - char *p; + int l; + const char *p; pr_debug("%s: depth: %d, uname: %s\n", __func__, depth, uname); @@ -89,7 +80,7 @@ int __init early_init_dt_scan_chosen_serial(unsigned long node, (strncmp(p, "xlnx,opb-uartlite", 17) == 0) || (strncmp(p, "xlnx,axi-uartlite", 17) == 0) || (strncmp(p, "xlnx,mdm", 8) == 0)) { - unsigned int *addrp; + const unsigned int *addrp; *(u32 *)data = UARTLITE; @@ -111,21 +102,10 @@ void __init early_init_devtree(void *params) { pr_debug(" -> early_init_devtree(%p)\n", params); - /* Setup flat device-tree pointer */ - initial_boot_params = params; - - /* Retrieve various informations from the /chosen node of the - * device-tree, including the platform type, initrd location and - * size, TCE reserve, and more ... - */ - of_scan_flat_dt(early_init_dt_scan_chosen, cmd_line); + early_init_dt_scan(params); + if (!strlen(boot_command_line)) + strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE); - /* Scan memory nodes and rebuild MEMBLOCKs */ - of_scan_flat_dt(early_init_dt_scan_root, NULL); - of_scan_flat_dt(early_init_dt_scan_memory, NULL); - - /* Save command line for /proc/cmdline and then parse parameters */ - strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE); parse_early_param(); memblock_allow_resize(); @@ -134,44 +114,3 @@ void __init early_init_devtree(void *params) pr_debug(" <- early_init_devtree()\n"); } - -#ifdef CONFIG_BLK_DEV_INITRD -void __init early_init_dt_setup_initrd_arch(unsigned long start, - unsigned long end) -{ - initrd_start = (unsigned long)__va(start); - initrd_end = (unsigned long)__va(end); - initrd_below_start_ok = 1; -} -#endif - -/******* - * - * New implementation of the OF "find" APIs, return a refcounted - * object, call of_node_put() when done. The device tree and list - * are protected by a rw_lock. - * - * Note that property management will need some locking as well, - * this isn't dealt with yet. - * - *******/ - -#if defined(CONFIG_DEBUG_FS) && defined(DEBUG) -static struct debugfs_blob_wrapper flat_dt_blob; - -static int __init export_flat_device_tree(void) -{ - struct dentry *d; - - flat_dt_blob.data = initial_boot_params; - flat_dt_blob.size = initial_boot_params->totalsize; - - d = debugfs_create_blob("flat-device-tree", S_IFREG | S_IRUSR, - of_debugfs_root, &flat_dt_blob); - if (!d) - return 1; - - return 0; -} -device_initcall(export_flat_device_tree); -#endif diff --git a/arch/microblaze/kernel/prom_parse.c b/arch/microblaze/kernel/prom_parse.c index 47187cc2cf0..068762f55fd 100644 --- a/arch/microblaze/kernel/prom_parse.c +++ b/arch/microblaze/kernel/prom_parse.c @@ -1,8 +1,8 @@ #undef DEBUG +#include <linux/export.h> #include <linux/kernel.h> #include <linux/string.h> -#include <linux/module.h> #include <linux/ioport.h> #include <linux/etherdevice.h> #include <linux/of_address.h> diff --git a/arch/microblaze/kernel/ptrace.c b/arch/microblaze/kernel/ptrace.c index ab1b9db661f..39cf50841f6 100644 --- a/arch/microblaze/kernel/ptrace.c +++ b/arch/microblaze/kernel/ptrace.c @@ -40,7 +40,7 @@ #include <asm/asm-offsets.h> #include <asm/cacheflush.h> #include <asm/syscall.h> -#include <asm/io.h> +#include <linux/io.h> /* Returns the address where the register at REG_OFFS in P is stashed away. */ static microblaze_reg_t *reg_save_addr(unsigned reg_offs, @@ -164,29 +164,6 @@ asmlinkage void do_syscall_trace_leave(struct pt_regs *regs) tracehook_report_syscall_exit(regs, step); } -#if 0 -static asmlinkage void syscall_trace(void) -{ - if (!test_thread_flag(TIF_SYSCALL_TRACE)) - return; - if (!(current->ptrace & PT_PTRACED)) - return; - /* The 0x80 provides a way for the tracing parent to distinguish - between a syscall stop and SIGTRAP delivery */ - ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) - ? 0x80 : 0)); - /* - * this isn't the same as continuing with a signal, but it will do - * for normal use. strace only continues with a signal if the - * stopping signal is not SIGTRAP. -brl - */ - if (current->exit_code) { - send_sig(current->exit_code, current, 1); - current->exit_code = 0; - } -} -#endif - void ptrace_disable(struct task_struct *child) { /* nothing to do */ diff --git a/arch/microblaze/kernel/reset.c b/arch/microblaze/kernel/reset.c index 88a01636f78..fbe58c6554a 100644 --- a/arch/microblaze/kernel/reset.c +++ b/arch/microblaze/kernel/reset.c @@ -26,13 +26,14 @@ void of_platform_reset_gpio_probe(void) "hard-reset-gpios", 0); if (!gpio_is_valid(handle)) { - printk(KERN_INFO "Skipping unavailable RESET gpio %d (%s)\n", + pr_info("Skipping unavailable RESET gpio %d (%s)\n", handle, "reset"); + return; } ret = gpio_request(handle, "reset"); if (ret < 0) { - printk(KERN_INFO "GPIO pin is already allocated\n"); + pr_info("GPIO pin is already allocated\n"); return; } @@ -49,7 +50,7 @@ void of_platform_reset_gpio_probe(void) /* Setup output direction */ gpio_set_value(handle, 0); - printk(KERN_INFO "RESET: Registered gpio device: %d, current val: %d\n", + pr_info("RESET: Registered gpio device: %d, current val: %d\n", handle, reset_val); return; err: @@ -60,10 +61,17 @@ err: static void gpio_system_reset(void) { - gpio_set_value(handle, 1 - reset_val); + if (gpio_is_valid(handle)) + gpio_set_value(handle, 1 - reset_val); + else + pr_notice("Reset GPIO unavailable - halting!\n"); } #else -#define gpio_system_reset() do {} while (0) +static void gpio_system_reset(void) +{ + pr_notice("No reset GPIO present - halting!\n"); +} + void of_platform_reset_gpio_probe(void) { return; @@ -72,30 +80,29 @@ void of_platform_reset_gpio_probe(void) void machine_restart(char *cmd) { - printk(KERN_NOTICE "Machine restart...\n"); + pr_notice("Machine restart...\n"); gpio_system_reset(); - dump_stack(); while (1) ; } void machine_shutdown(void) { - printk(KERN_NOTICE "Machine shutdown...\n"); + pr_notice("Machine shutdown...\n"); while (1) ; } void machine_halt(void) { - printk(KERN_NOTICE "Machine halt...\n"); + pr_notice("Machine halt...\n"); while (1) ; } void machine_power_off(void) { - printk(KERN_NOTICE "Machine power off...\n"); + pr_notice("Machine power off...\n"); while (1) ; } diff --git a/arch/microblaze/kernel/selfmod.c b/arch/microblaze/kernel/selfmod.c deleted file mode 100644 index 89508bdc9f3..00000000000 --- a/arch/microblaze/kernel/selfmod.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu> - * Copyright (C) 2009 PetaLogix - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include <linux/interrupt.h> -#include <asm/selfmod.h> - -#undef DEBUG - -#if __GNUC__ > 3 -#error GCC 4 unsupported SELFMOD. Please disable SELFMOD from menuconfig. -#endif - -#define OPCODE_IMM 0xB0000000 -#define OPCODE_LWI 0xE8000000 -#define OPCODE_LWI_MASK 0xEC000000 -#define OPCODE_RTSD 0xB60F0008 /* return from func: rtsd r15, 8 */ -#define OPCODE_ADDIK 0x30000000 -#define OPCODE_ADDIK_MASK 0xFC000000 - -#define IMM_BASE (OPCODE_IMM | (BARRIER_BASE_ADDR >> 16)) -#define LWI_BASE (OPCODE_LWI | (BARRIER_BASE_ADDR & 0x0000ff00)) -#define LWI_BASE_MASK (OPCODE_LWI_MASK | (BARRIER_BASE_ADDR & 0x0000ff00)) -#define ADDIK_BASE (OPCODE_ADDIK | (BARRIER_BASE_ADDR & 0x0000ff00)) -#define ADDIK_BASE_MASK (OPCODE_ADDIK_MASK | (BARRIER_BASE_ADDR & 0x0000ff00)) - -#define MODIFY_INSTR { \ - pr_debug("%s: curr instr, (%d):0x%x, next(%d):0x%x\n", \ - __func__, i, addr[i], i + 1, addr[i + 1]); \ - addr[i] = OPCODE_IMM + (base >> 16); \ - /* keep instruction opcode and add only last 16bits */ \ - addr[i + 1] = (addr[i + 1] & 0xffff00ff) + (base & 0xffff); \ - __invalidate_icache(addr[i]); \ - __invalidate_icache(addr[i + 1]); \ - pr_debug("%s: hack instr, (%d):0x%x, next(%d):0x%x\n", \ - __func__, i, addr[i], i + 1, addr[i + 1]); } - -/* NOTE - * self-modified part of code for improvement of interrupt controller - * save instruction in interrupt rutine - */ -void selfmod_function(const int *arr_fce, const unsigned int base) -{ - unsigned int flags, i, j, *addr = NULL; - - local_irq_save(flags); - __disable_icache(); - - /* zero terminated array */ - for (j = 0; arr_fce[j] != 0; j++) { - /* get start address of function */ - addr = (unsigned int *) arr_fce[j]; - pr_debug("%s: func(%d) at 0x%x\n", - __func__, j, (unsigned int) addr); - for (i = 0; ; i++) { - pr_debug("%s: instruction code at %d: 0x%x\n", - __func__, i, addr[i]); - if (addr[i] == IMM_BASE) { - /* detecting of lwi (0xE8) or swi (0xF8) instr - * I can detect both opcode with one mask */ - if ((addr[i + 1] & LWI_BASE_MASK) == LWI_BASE) { - MODIFY_INSTR; - } else /* detection addik for ack */ - if ((addr[i + 1] & ADDIK_BASE_MASK) == - ADDIK_BASE) { - MODIFY_INSTR; - } - } else if (addr[i] == OPCODE_RTSD) { - /* return from function means end of function */ - pr_debug("%s: end of array %d\n", __func__, i); - break; - } - } - } - local_irq_restore(flags); -} /* end of self-modified code */ diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c index 16d8dfd9094..ab5b488e1fd 100644 --- a/arch/microblaze/kernel/setup.c +++ b/arch/microblaze/kernel/setup.c @@ -9,12 +9,15 @@ */ #include <linux/init.h> +#include <linux/clk-provider.h> +#include <linux/clocksource.h> #include <linux/string.h> #include <linux/seq_file.h> #include <linux/cpu.h> #include <linux/initrd.h> #include <linux/console.h> #include <linux/debugfs.h> +#include <linux/of_fdt.h> #include <asm/setup.h> #include <asm/sections.h> @@ -40,11 +43,16 @@ DEFINE_PER_CPU(unsigned int, R11_SAVE); /* Temp variable for entry */ DEFINE_PER_CPU(unsigned int, CURRENT_SAVE); /* Saved current pointer */ unsigned int boot_cpuid; -char cmd_line[COMMAND_LINE_SIZE]; +/* + * Placed cmd_line to .data section because can be initialized from + * ASM code. Default position is BSS section which is cleared + * in machine_early_init(). + */ +char cmd_line[COMMAND_LINE_SIZE] __attribute__ ((section(".data"))); void __init setup_arch(char **cmdline_p) { - *cmdline_p = cmd_line; + *cmdline_p = boot_command_line; console_verbose(); @@ -63,17 +71,9 @@ void __init setup_arch(char **cmdline_p) xilinx_pci_init(); -#if defined(CONFIG_SELFMOD_INTC) || defined(CONFIG_SELFMOD_TIMER) - printk(KERN_NOTICE "Self modified code enable\n"); -#endif - -#ifdef CONFIG_VT -#if defined(CONFIG_XILINX_CONSOLE) - conswitchp = &xil_con; -#elif defined(CONFIG_DUMMY_CONSOLE) +#if defined(CONFIG_DUMMY_CONSOLE) conswitchp = &dummy_con; #endif -#endif } #ifdef CONFIG_MTD_UCLINUX @@ -121,7 +121,7 @@ void __init machine_early_init(const char *cmdline, unsigned int ram, /* Move ROMFS out of BSS before clearing it */ if (romfs_size > 0) { - memmove(&_ebss, (int *)romfs_base, romfs_size); + memmove(&__bss_stop, (int *)romfs_base, romfs_size); klimit += romfs_size; } #endif @@ -130,16 +130,10 @@ void __init machine_early_init(const char *cmdline, unsigned int ram, memset(__bss_start, 0, __bss_stop-__bss_start); memset(_ssbss, 0, _esbss-_ssbss); - /* Copy command line passed from bootloader */ -#ifndef CONFIG_CMDLINE_BOOL - if (cmdline && cmdline[0] != '\0') - strlcpy(cmd_line, cmdline, COMMAND_LINE_SIZE); -#endif - lockdep_init(); /* initialize device tree for usage in early_printk */ - early_init_devtree((void *)_fdt_start); + early_init_devtree(_fdt_start); #ifdef CONFIG_EARLY_PRINTK setup_early_printk(NULL); @@ -151,33 +145,34 @@ void __init machine_early_init(const char *cmdline, unsigned int ram, /* printk("TLB1 0x%08x, TLB0 0x%08x, tlb 0x%x\n", tlb0, tlb1, kernel_tlb); */ - printk("Ramdisk addr 0x%08x, ", ram); + pr_info("Ramdisk addr 0x%08x, ", ram); if (fdt) - printk("FDT at 0x%08x\n", fdt); + pr_info("FDT at 0x%08x\n", fdt); else - printk("Compiled-in FDT at 0x%08x\n", - (unsigned int)_fdt_start); + pr_info("Compiled-in FDT at %p\n", _fdt_start); #ifdef CONFIG_MTD_UCLINUX - printk("Found romfs @ 0x%08x (0x%08x)\n", + pr_info("Found romfs @ 0x%08x (0x%08x)\n", romfs_base, romfs_size); - printk("#### klimit %p ####\n", old_klimit); + pr_info("#### klimit %p ####\n", old_klimit); BUG_ON(romfs_size < 0); /* What else can we do? */ - printk("Moved 0x%08x bytes from 0x%08x to 0x%08x\n", - romfs_size, romfs_base, (unsigned)&_ebss); + pr_info("Moved 0x%08x bytes from 0x%08x to 0x%08x\n", + romfs_size, romfs_base, (unsigned)&__bss_stop); - printk("New klimit: 0x%08x\n", (unsigned)klimit); + pr_info("New klimit: 0x%08x\n", (unsigned)klimit); #endif #if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR - if (msr) - printk("!!!Your kernel has setup MSR instruction but " - "CPU don't have it %x\n", msr); + if (msr) { + pr_info("!!!Your kernel has setup MSR instruction but "); + pr_cont("CPU don't have it %x\n", msr); + } #else - if (!msr) - printk("!!!Your kernel not setup MSR instruction but " - "CPU have it %x\n", msr); + if (!msr) { + pr_info("!!!Your kernel not setup MSR instruction but "); + pr_cont("CPU have it %x\n", msr); + } #endif /* Do not copy reset vectors. offset = 0x2 means skip the first @@ -195,6 +190,13 @@ void __init machine_early_init(const char *cmdline, unsigned int ram, per_cpu(CURRENT_SAVE, 0) = (unsigned long)current; } +void __init time_init(void) +{ + of_clk_init(NULL); + setup_cpuinfo_clk(); + clocksource_of_init(); +} + #ifdef CONFIG_DEBUG_FS struct dentry *of_debugfs_root; @@ -217,35 +219,9 @@ static int __init debugfs_tlb(void) d = debugfs_create_u32("tlb_skip", S_IRUGO, of_debugfs_root, &tlb_skip); if (!d) return -ENOMEM; + + return 0; } device_initcall(debugfs_tlb); # endif #endif - -static int dflt_bus_notify(struct notifier_block *nb, - unsigned long action, void *data) -{ - struct device *dev = data; - - /* We are only intereted in device addition */ - if (action != BUS_NOTIFY_ADD_DEVICE) - return 0; - - set_dma_ops(dev, &dma_direct_ops); - - return NOTIFY_DONE; -} - -static struct notifier_block dflt_plat_bus_notifier = { - .notifier_call = dflt_bus_notify, - .priority = INT_MAX, -}; - -static int __init setup_bus_notifier(void) -{ - bus_register_notifier(&platform_bus_type, &dflt_plat_bus_notifier); - - return 0; -} - -arch_initcall(setup_bus_notifier); diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c index 76b9722557d..49a07a4d76d 100644 --- a/arch/microblaze/kernel/signal.c +++ b/arch/microblaze/kernel/signal.c @@ -41,13 +41,6 @@ #include <asm/cacheflush.h> #include <asm/syscalls.h> -asmlinkage long -sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, - struct pt_regs *regs) -{ - return do_sigaltstack(uss, uoss, regs->r1); -} - /* * Do a signal return; undo the signal stack. */ @@ -109,9 +102,7 @@ asmlinkage long sys_rt_sigreturn(struct pt_regs *regs) if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &rval)) goto badframe; - /* It is more difficult to avoid calling this function than to - call it and ignore errors. */ - if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->r1)) + if (restore_altstack(&frame->uc.uc_stack)) goto badframe; return rval; @@ -194,11 +185,7 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, /* Create the ucontext. */ err |= __put_user(0, &frame->uc.uc_flags); err |= __put_user(NULL, &frame->uc.uc_link); - err |= __put_user((void __user *)current->sas_ss_sp, - &frame->uc.uc_stack.ss_sp); - err |= __put_user(sas_ss_flags(regs->r1), - &frame->uc.uc_stack.ss_flags); - err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size); + err |= __save_altstack(&frame->uc.uc_stack, regs->r1); err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, set->sig[0]); err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); @@ -229,7 +216,7 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, /* MS: I need add offset in page */ address += ((unsigned long)frame->tramp) & ~PAGE_MASK; /* MS address is virtual */ - address = virt_to_phys(address); + address = __virt_to_phys(address); invalidate_icache_range(address, address + 8); flush_dcache_range(address, address + 8); } @@ -254,12 +241,8 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, set_fs(USER_DS); - /* the tracer may want to single-step inside the handler */ - if (test_thread_flag(TIF_SINGLESTEP)) - ptrace_notify(SIGTRAP); - #ifdef DEBUG_SIG - printk(KERN_INFO "SIG deliver (%s:%d): sp=%p pc=%08lx\n", + pr_info("SIG deliver (%s:%d): sp=%p pc=%08lx\n", current->comm, current->pid, frame, regs->pc); #endif @@ -290,15 +273,7 @@ handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler) case -ERESTARTNOINTR: do_restart: /* offset of 4 bytes to re-execute trap (brki) instruction */ -#ifndef CONFIG_MMU regs->pc -= 4; -#else - /* offset of 8 bytes required = 4 for rtbd - offset, plus 4 for size of - "brki r14,8" - instruction. */ - regs->pc -= 8; -#endif break; } } @@ -323,7 +298,8 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, if (ret) return; - signal_delivered(sig, info, ka, regs, 0); + signal_delivered(sig, info, ka, regs, + test_thread_flag(TIF_SINGLESTEP)); } /* @@ -341,8 +317,8 @@ static void do_signal(struct pt_regs *regs, int in_syscall) int signr; struct k_sigaction ka; #ifdef DEBUG_SIG - printk(KERN_INFO "do signal: %p %d\n", regs, in_syscall); - printk(KERN_INFO "do signal2: %lx %lx %ld [%lx]\n", regs->pc, regs->r1, + pr_info("do signal: %p %d\n", regs, in_syscall); + pr_info("do signal2: %lx %lx %ld [%lx]\n", regs->pc, regs->r1, regs->r12, current_thread_info()->flags); #endif @@ -365,17 +341,8 @@ static void do_signal(struct pt_regs *regs, int in_syscall) restore_saved_sigmask(); } -void do_notify_resume(struct pt_regs *regs, int in_syscall) +asmlinkage void do_notify_resume(struct pt_regs *regs, int in_syscall) { - /* - * We want the common case to go fast, which - * is why we may in certain cases get here from - * kernel mode. Just return without doing anything - * if so. - */ - if (kernel_mode(regs)) - return; - if (test_thread_flag(TIF_SIGPENDING)) do_signal(regs, in_syscall); diff --git a/arch/microblaze/kernel/stacktrace.c b/arch/microblaze/kernel/stacktrace.c index 84bc6686102..b4debe283a7 100644 --- a/arch/microblaze/kernel/stacktrace.c +++ b/arch/microblaze/kernel/stacktrace.c @@ -9,11 +9,11 @@ * for more details. */ +#include <linux/export.h> #include <linux/sched.h> #include <linux/stacktrace.h> #include <linux/thread_info.h> #include <linux/ptrace.h> -#include <linux/module.h> #include <asm/unwind.h> void save_stack_trace(struct stack_trace *trace) diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c index e5b154f24f8..f1e1f666ddd 100644 --- a/arch/microblaze/kernel/sys_microblaze.c +++ b/arch/microblaze/kernel/sys_microblaze.c @@ -13,6 +13,7 @@ */ #include <linux/errno.h> +#include <linux/export.h> #include <linux/mm.h> #include <linux/smp.h> #include <linux/syscalls.h> @@ -24,51 +25,17 @@ #include <linux/sys.h> #include <linux/ipc.h> #include <linux/file.h> -#include <linux/module.h> #include <linux/err.h> #include <linux/fs.h> #include <linux/semaphore.h> #include <linux/uaccess.h> #include <linux/unistd.h> #include <linux/slab.h> - #include <asm/syscalls.h> -asmlinkage long microblaze_vfork(struct pt_regs *regs) -{ - return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->r1, - regs, 0, NULL, NULL); -} - -asmlinkage long microblaze_clone(int flags, unsigned long stack, - struct pt_regs *regs) -{ - if (!stack) - stack = regs->r1; - return do_fork(flags, stack, regs, 0, NULL, NULL); -} - -asmlinkage long microblaze_execve(const char __user *filenamei, - const char __user *const __user *argv, - const char __user *const __user *envp, - struct pt_regs *regs) -{ - int error; - char *filename; - - filename = getname(filenamei); - error = PTR_ERR(filename); - if (IS_ERR(filename)) - goto out; - error = do_execve(filename, argv, envp, regs); - putname(filename); -out: - return error; -} - -asmlinkage long sys_mmap(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, off_t pgoff) +SYSCALL_DEFINE6(mmap, unsigned long, addr, unsigned long, len, + unsigned long, prot, unsigned long, flags, unsigned long, fd, + off_t, pgoff) { if (pgoff & ~PAGE_MASK) return -EINVAL; @@ -76,23 +43,13 @@ asmlinkage long sys_mmap(unsigned long addr, unsigned long len, return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff >> PAGE_SHIFT); } -/* - * Do a system call from kernel instead of calling sys_execve so we - * end up with proper pt_regs. - */ -int kernel_execve(const char *filename, - const char *const argv[], - const char *const envp[]) +SYSCALL_DEFINE6(mmap2, unsigned long, addr, unsigned long, len, + unsigned long, prot, unsigned long, flags, unsigned long, fd, + unsigned long, pgoff) { - register const char *__a __asm__("r5") = filename; - register const void *__b __asm__("r6") = argv; - register const void *__c __asm__("r7") = envp; - register unsigned long __syscall __asm__("r12") = __NR_execve; - register unsigned long __ret __asm__("r3"); - __asm__ __volatile__ ("brki r14, 0x8" - : "=r" (__ret), "=r" (__syscall) - : "1" (__syscall), "r" (__a), "r" (__b), "r" (__c) - : "r4", "r8", "r9", - "r10", "r11", "r14", "cc", "memory"); - return __ret; + if (pgoff & (~PAGE_MASK >> 12)) + return -EINVAL; + + return sys_mmap_pgoff(addr, len, prot, flags, fd, + pgoff >> (PAGE_SHIFT - 12)); } diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S index 6a2b294ef6d..329dfbad810 100644 --- a/arch/microblaze/kernel/syscall_table.S +++ b/arch/microblaze/kernel/syscall_table.S @@ -2,11 +2,7 @@ ENTRY(sys_call_table) .long sys_restart_syscall /* 0 - old "setup()" system call, * used for restarting */ .long sys_exit -#ifdef CONFIG_MMU - .long sys_fork_wrapper -#else - .long sys_ni_syscall -#endif + .long sys_fork .long sys_read .long sys_write .long sys_open /* 5 */ @@ -196,7 +192,7 @@ ENTRY(sys_call_table) .long sys_ni_syscall /* reserved for streams2 */ .long sys_vfork /* 190 */ .long sys_getrlimit - .long sys_mmap_pgoff /* mmap2 */ + .long sys_mmap2 .long sys_truncate64 .long sys_ftruncate64 .long sys_stat64 /* 195 */ @@ -312,7 +308,7 @@ ENTRY(sys_call_table) .long sys_readlinkat /* 305 */ .long sys_fchmodat .long sys_faccessat - .long sys_ni_syscall /* pselect6 */ + .long sys_pselect6 .long sys_ppoll .long sys_unshare /* 310 */ .long sys_set_robust_list @@ -367,8 +363,8 @@ ENTRY(sys_call_table) .long sys_sendmsg /* 360 */ .long sys_recvmsg .long sys_accept4 - .long sys_ni_syscall - .long sys_ni_syscall + .long sys_preadv + .long sys_pwritev .long sys_rt_tgsigqueueinfo /* 365 */ .long sys_perf_event_open .long sys_recvmmsg @@ -383,3 +379,7 @@ ENTRY(sys_call_table) .long sys_sendmmsg .long sys_process_vm_readv .long sys_process_vm_writev + .long sys_kcmp + .long sys_finit_module + .long sys_sched_setattr + .long sys_sched_getattr diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c index 522defa7d41..dd96f0e4bfa 100644 --- a/arch/microblaze/kernel/timer.c +++ b/arch/microblaze/kernel/timer.c @@ -1,5 +1,6 @@ /* - * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu> + * Copyright (C) 2007-2013 Michal Simek <monstr@monstr.eu> + * Copyright (C) 2012-2013 Xilinx, Inc. * Copyright (C) 2007-2009 PetaLogix * Copyright (C) 2006 Atmark Techno, Inc. * @@ -8,34 +9,17 @@ * for more details. */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/param.h> #include <linux/interrupt.h> -#include <linux/profile.h> -#include <linux/irq.h> #include <linux/delay.h> #include <linux/sched.h> -#include <linux/spinlock.h> -#include <linux/err.h> +#include <linux/sched_clock.h> #include <linux/clk.h> -#include <linux/clocksource.h> #include <linux/clockchips.h> -#include <linux/io.h> -#include <linux/bug.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <asm/cpuinfo.h> -#include <asm/setup.h> -#include <asm/prom.h> -#include <asm/irq.h> -#include <linux/cnt32_to_63.h> - -#ifdef CONFIG_SELFMOD_TIMER -#include <asm/selfmod.h> -#define TIMER_BASE BARRIER_BASE_ADDR -#else -static unsigned int timer_baseaddr; -#define TIMER_BASE timer_baseaddr -#endif + +static void __iomem *timer_baseaddr; static unsigned int freq_div_hz; static unsigned int timer_clock_freq; @@ -59,19 +43,44 @@ static unsigned int timer_clock_freq; #define TCSR_PWMA (1<<9) #define TCSR_ENALL (1<<10) -static inline void microblaze_timer0_stop(void) +static unsigned int (*read_fn)(void __iomem *); +static void (*write_fn)(u32, void __iomem *); + +static void timer_write32(u32 val, void __iomem *addr) +{ + iowrite32(val, addr); +} + +static unsigned int timer_read32(void __iomem *addr) { - out_be32(TIMER_BASE + TCSR0, in_be32(TIMER_BASE + TCSR0) & ~TCSR_ENT); + return ioread32(addr); } -static inline void microblaze_timer0_start_periodic(unsigned long load_val) +static void timer_write32_be(u32 val, void __iomem *addr) +{ + iowrite32be(val, addr); +} + +static unsigned int timer_read32_be(void __iomem *addr) +{ + return ioread32be(addr); +} + +static inline void xilinx_timer0_stop(void) +{ + write_fn(read_fn(timer_baseaddr + TCSR0) & ~TCSR_ENT, + timer_baseaddr + TCSR0); +} + +static inline void xilinx_timer0_start_periodic(unsigned long load_val) { if (!load_val) load_val = 1; - out_be32(TIMER_BASE + TLR0, load_val); /* loading value to timer reg */ + /* loading value to timer reg */ + write_fn(load_val, timer_baseaddr + TLR0); /* load the initial value */ - out_be32(TIMER_BASE + TCSR0, TCSR_LOAD); + write_fn(TCSR_LOAD, timer_baseaddr + TCSR0); /* see timer data sheet for detail * !ENALL - don't enable 'em all @@ -86,74 +95,75 @@ static inline void microblaze_timer0_start_periodic(unsigned long load_val) * UDT - set the timer as down counter * !MDT0 - generate mode */ - out_be32(TIMER_BASE + TCSR0, - TCSR_TINT|TCSR_ENIT|TCSR_ENT|TCSR_ARHT|TCSR_UDT); + write_fn(TCSR_TINT|TCSR_ENIT|TCSR_ENT|TCSR_ARHT|TCSR_UDT, + timer_baseaddr + TCSR0); } -static inline void microblaze_timer0_start_oneshot(unsigned long load_val) +static inline void xilinx_timer0_start_oneshot(unsigned long load_val) { if (!load_val) load_val = 1; - out_be32(TIMER_BASE + TLR0, load_val); /* loading value to timer reg */ + /* loading value to timer reg */ + write_fn(load_val, timer_baseaddr + TLR0); /* load the initial value */ - out_be32(TIMER_BASE + TCSR0, TCSR_LOAD); + write_fn(TCSR_LOAD, timer_baseaddr + TCSR0); - out_be32(TIMER_BASE + TCSR0, - TCSR_TINT|TCSR_ENIT|TCSR_ENT|TCSR_ARHT|TCSR_UDT); + write_fn(TCSR_TINT|TCSR_ENIT|TCSR_ENT|TCSR_ARHT|TCSR_UDT, + timer_baseaddr + TCSR0); } -static int microblaze_timer_set_next_event(unsigned long delta, +static int xilinx_timer_set_next_event(unsigned long delta, struct clock_event_device *dev) { pr_debug("%s: next event, delta %x\n", __func__, (u32)delta); - microblaze_timer0_start_oneshot(delta); + xilinx_timer0_start_oneshot(delta); return 0; } -static void microblaze_timer_set_mode(enum clock_event_mode mode, +static void xilinx_timer_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) { switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - printk(KERN_INFO "%s: periodic\n", __func__); - microblaze_timer0_start_periodic(freq_div_hz); + pr_info("%s: periodic\n", __func__); + xilinx_timer0_start_periodic(freq_div_hz); break; case CLOCK_EVT_MODE_ONESHOT: - printk(KERN_INFO "%s: oneshot\n", __func__); + pr_info("%s: oneshot\n", __func__); break; case CLOCK_EVT_MODE_UNUSED: - printk(KERN_INFO "%s: unused\n", __func__); + pr_info("%s: unused\n", __func__); break; case CLOCK_EVT_MODE_SHUTDOWN: - printk(KERN_INFO "%s: shutdown\n", __func__); - microblaze_timer0_stop(); + pr_info("%s: shutdown\n", __func__); + xilinx_timer0_stop(); break; case CLOCK_EVT_MODE_RESUME: - printk(KERN_INFO "%s: resume\n", __func__); + pr_info("%s: resume\n", __func__); break; } } -static struct clock_event_device clockevent_microblaze_timer = { - .name = "microblaze_clockevent", +static struct clock_event_device clockevent_xilinx_timer = { + .name = "xilinx_clockevent", .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC, .shift = 8, .rating = 300, - .set_next_event = microblaze_timer_set_next_event, - .set_mode = microblaze_timer_set_mode, + .set_next_event = xilinx_timer_set_next_event, + .set_mode = xilinx_timer_set_mode, }; static inline void timer_ack(void) { - out_be32(TIMER_BASE + TCSR0, in_be32(TIMER_BASE + TCSR0)); + write_fn(read_fn(timer_baseaddr + TCSR0), timer_baseaddr + TCSR0); } static irqreturn_t timer_interrupt(int irq, void *dev_id) { - struct clock_event_device *evt = &clockevent_microblaze_timer; + struct clock_event_device *evt = &clockevent_xilinx_timer; #ifdef CONFIG_HEART_BEAT - heartbeat(); + microblaze_heartbeat(); #endif timer_ack(); evt->event_handler(evt); @@ -162,145 +172,147 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id) static struct irqaction timer_irqaction = { .handler = timer_interrupt, - .flags = IRQF_DISABLED | IRQF_TIMER, + .flags = IRQF_TIMER, .name = "timer", - .dev_id = &clockevent_microblaze_timer, + .dev_id = &clockevent_xilinx_timer, }; -static __init void microblaze_clockevent_init(void) +static __init void xilinx_clockevent_init(void) { - clockevent_microblaze_timer.mult = + clockevent_xilinx_timer.mult = div_sc(timer_clock_freq, NSEC_PER_SEC, - clockevent_microblaze_timer.shift); - clockevent_microblaze_timer.max_delta_ns = - clockevent_delta2ns((u32)~0, &clockevent_microblaze_timer); - clockevent_microblaze_timer.min_delta_ns = - clockevent_delta2ns(1, &clockevent_microblaze_timer); - clockevent_microblaze_timer.cpumask = cpumask_of(0); - clockevents_register_device(&clockevent_microblaze_timer); + clockevent_xilinx_timer.shift); + clockevent_xilinx_timer.max_delta_ns = + clockevent_delta2ns((u32)~0, &clockevent_xilinx_timer); + clockevent_xilinx_timer.min_delta_ns = + clockevent_delta2ns(1, &clockevent_xilinx_timer); + clockevent_xilinx_timer.cpumask = cpumask_of(0); + clockevents_register_device(&clockevent_xilinx_timer); +} + +static u64 xilinx_clock_read(void) +{ + return read_fn(timer_baseaddr + TCR1); } -static cycle_t microblaze_read(struct clocksource *cs) +static cycle_t xilinx_read(struct clocksource *cs) { /* reading actual value of timer 1 */ - return (cycle_t) (in_be32(TIMER_BASE + TCR1)); + return (cycle_t)xilinx_clock_read(); } -static struct timecounter microblaze_tc = { +static struct timecounter xilinx_tc = { .cc = NULL, }; -static cycle_t microblaze_cc_read(const struct cyclecounter *cc) +static cycle_t xilinx_cc_read(const struct cyclecounter *cc) { - return microblaze_read(NULL); + return xilinx_read(NULL); } -static struct cyclecounter microblaze_cc = { - .read = microblaze_cc_read, +static struct cyclecounter xilinx_cc = { + .read = xilinx_cc_read, .mask = CLOCKSOURCE_MASK(32), .shift = 8, }; -static int __init init_microblaze_timecounter(void) +static int __init init_xilinx_timecounter(void) { - microblaze_cc.mult = div_sc(timer_clock_freq, NSEC_PER_SEC, - microblaze_cc.shift); + xilinx_cc.mult = div_sc(timer_clock_freq, NSEC_PER_SEC, + xilinx_cc.shift); - timecounter_init(µblaze_tc, µblaze_cc, sched_clock()); + timecounter_init(&xilinx_tc, &xilinx_cc, sched_clock()); return 0; } static struct clocksource clocksource_microblaze = { - .name = "microblaze_clocksource", + .name = "xilinx_clocksource", .rating = 300, - .read = microblaze_read, + .read = xilinx_read, .mask = CLOCKSOURCE_MASK(32), .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -static int __init microblaze_clocksource_init(void) +static int __init xilinx_clocksource_init(void) { if (clocksource_register_hz(&clocksource_microblaze, timer_clock_freq)) panic("failed to register clocksource"); /* stop timer1 */ - out_be32(TIMER_BASE + TCSR1, in_be32(TIMER_BASE + TCSR1) & ~TCSR_ENT); + write_fn(read_fn(timer_baseaddr + TCSR1) & ~TCSR_ENT, + timer_baseaddr + TCSR1); /* start timer1 - up counting without interrupt */ - out_be32(TIMER_BASE + TCSR1, TCSR_TINT|TCSR_ENT|TCSR_ARHT); + write_fn(TCSR_TINT|TCSR_ENT|TCSR_ARHT, timer_baseaddr + TCSR1); /* register timecounter - for ftrace support */ - init_microblaze_timecounter(); + init_xilinx_timecounter(); return 0; } -/* - * We have to protect accesses before timer initialization - * and return 0 for sched_clock function below. - */ -static int timer_initialized; - -void __init time_init(void) +static void __init xilinx_timer_init(struct device_node *timer) { + struct clk *clk; + static int initialized; u32 irq; u32 timer_num = 1; - struct device_node *timer = NULL; - const void *prop; -#ifdef CONFIG_SELFMOD_TIMER - unsigned int timer_baseaddr = 0; - int arr_func[] = { - (int)µblaze_read, - (int)&timer_interrupt, - (int)µblaze_clocksource_init, - (int)µblaze_timer_set_mode, - (int)µblaze_timer_set_next_event, - 0 - }; -#endif - timer = of_find_compatible_node(NULL, NULL, "xlnx,xps-timer-1.00.a"); - BUG_ON(!timer); - timer_baseaddr = be32_to_cpup(of_get_property(timer, "reg", NULL)); - timer_baseaddr = (unsigned long) ioremap(timer_baseaddr, PAGE_SIZE); + if (initialized) + return; + + initialized = 1; + + timer_baseaddr = of_iomap(timer, 0); + if (!timer_baseaddr) { + pr_err("ERROR: invalid timer base address\n"); + BUG(); + } + + write_fn = timer_write32; + read_fn = timer_read32; + + write_fn(TCSR_MDT, timer_baseaddr + TCSR0); + if (!(read_fn(timer_baseaddr + TCSR0) & TCSR_MDT)) { + write_fn = timer_write32_be; + read_fn = timer_read32_be; + } + irq = irq_of_parse_and_map(timer, 0); - timer_num = be32_to_cpup(of_get_property(timer, - "xlnx,one-timer-only", NULL)); + + of_property_read_u32(timer, "xlnx,one-timer-only", &timer_num); if (timer_num) { - printk(KERN_EMERG "Please enable two timers in HW\n"); + pr_emerg("Please enable two timers in HW\n"); BUG(); } -#ifdef CONFIG_SELFMOD_TIMER - selfmod_function((int *) arr_func, timer_baseaddr); -#endif - printk(KERN_INFO "%s #0 at 0x%08x, irq=%d\n", - timer->name, timer_baseaddr, irq); - - /* If there is clock-frequency property than use it */ - prop = of_get_property(timer, "clock-frequency", NULL); - if (prop) - timer_clock_freq = be32_to_cpup(prop); - else + pr_info("%s: irq=%d\n", timer->full_name, irq); + + clk = of_clk_get(timer, 0); + if (IS_ERR(clk)) { + pr_err("ERROR: timer CCF input clock not found\n"); + /* If there is clock-frequency property than use it */ + of_property_read_u32(timer, "clock-frequency", + &timer_clock_freq); + } else { + timer_clock_freq = clk_get_rate(clk); + } + + if (!timer_clock_freq) { + pr_err("ERROR: Using CPU clock frequency\n"); timer_clock_freq = cpuinfo.cpu_clock_freq; + } freq_div_hz = timer_clock_freq / HZ; setup_irq(irq, &timer_irqaction); #ifdef CONFIG_HEART_BEAT - setup_heartbeat(); + microblaze_setup_heartbeat(); #endif - microblaze_clocksource_init(); - microblaze_clockevent_init(); - timer_initialized = 1; -} + xilinx_clocksource_init(); + xilinx_clockevent_init(); -unsigned long long notrace sched_clock(void) -{ - if (timer_initialized) { - struct clocksource *cs = &clocksource_microblaze; - - cycle_t cyc = cnt32_to_63(cs->read(NULL)) & LLONG_MAX; - return clocksource_cyc2ns(cyc, cs->mult, cs->shift); - } - return 0; + sched_clock_register(xilinx_clock_read, 32, timer_clock_freq); } + +CLOCKSOURCE_OF_DECLARE(xilinx_timer, "xlnx,xps-timer-1.00.a", + xilinx_timer_init); diff --git a/arch/microblaze/kernel/traps.c b/arch/microblaze/kernel/traps.c index 5541ac55959..cb619533a19 100644 --- a/arch/microblaze/kernel/traps.c +++ b/arch/microblaze/kernel/traps.c @@ -8,9 +8,9 @@ * for more details. */ +#include <linux/export.h> #include <linux/kernel.h> #include <linux/kallsyms.h> -#include <linux/module.h> #include <linux/sched.h> #include <linux/debug_locks.h> @@ -26,7 +26,7 @@ static unsigned long kstack_depth_to_print; /* 0 == entire stack */ static int __init kstack_setup(char *s) { - return !strict_strtoul(s, 0, &kstack_depth_to_print); + return !kstrtoul(s, 0, &kstack_depth_to_print); } __setup("kstack=", kstack_setup); @@ -66,9 +66,7 @@ void show_stack(struct task_struct *task, unsigned long *sp) } print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS, 32, 4, (void *)fp, words_to_show << 2, 0); - printk(KERN_INFO "\n\n"); - - pr_info("Call Trace:\n"); + pr_info("\n\nCall Trace:\n"); microblaze_unwind(task, NULL); pr_info("\n"); @@ -77,9 +75,3 @@ void show_stack(struct task_struct *task, unsigned long *sp) debug_show_held_locks(task); } - -void dump_stack(void) -{ - show_stack(NULL, NULL); -} -EXPORT_SYMBOL(dump_stack); diff --git a/arch/microblaze/kernel/unwind.c b/arch/microblaze/kernel/unwind.c index 6be4ae3c335..1f7b8d44966 100644 --- a/arch/microblaze/kernel/unwind.c +++ b/arch/microblaze/kernel/unwind.c @@ -13,13 +13,13 @@ */ /* #define DEBUG 1 */ +#include <linux/export.h> #include <linux/kallsyms.h> #include <linux/kernel.h> #include <linux/sched.h> #include <linux/stacktrace.h> #include <linux/types.h> #include <linux/errno.h> -#include <linux/module.h> #include <linux/io.h> #include <asm/sections.h> #include <asm/exceptions.h> diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S index 109e9d86ade..be9488d6973 100644 --- a/arch/microblaze/kernel/vmlinux.lds.S +++ b/arch/microblaze/kernel/vmlinux.lds.S @@ -51,6 +51,7 @@ SECTIONS { . = ALIGN(16); RODATA EXCEPTION_TABLE(16) + NOTES /* * sdata2 section can go anywhere, but must be word aligned @@ -131,7 +132,6 @@ SECTIONS { *(COMMON) . = ALIGN (4) ; __bss_stop = . ; - _ebss = . ; } . = ALIGN(PAGE_SIZE); _end = .; diff --git a/arch/microblaze/lib/ashldi3.c b/arch/microblaze/lib/ashldi3.c index beb80f31609..1af904cd972 100644 --- a/arch/microblaze/lib/ashldi3.c +++ b/arch/microblaze/lib/ashldi3.c @@ -1,4 +1,4 @@ -#include <linux/module.h> +#include <linux/export.h> #include "libgcc.h" @@ -25,5 +25,4 @@ long long __ashldi3(long long u, word_type b) return w.ll; } - EXPORT_SYMBOL(__ashldi3); diff --git a/arch/microblaze/lib/ashrdi3.c b/arch/microblaze/lib/ashrdi3.c index c884a912b66..32c334c05d0 100644 --- a/arch/microblaze/lib/ashrdi3.c +++ b/arch/microblaze/lib/ashrdi3.c @@ -1,4 +1,4 @@ -#include <linux/module.h> +#include <linux/export.h> #include "libgcc.h" @@ -27,5 +27,4 @@ long long __ashrdi3(long long u, word_type b) return w.ll; } - EXPORT_SYMBOL(__ashrdi3); diff --git a/arch/microblaze/lib/cmpdi2.c b/arch/microblaze/lib/cmpdi2.c index a708400ea7b..67abc9ac1bd 100644 --- a/arch/microblaze/lib/cmpdi2.c +++ b/arch/microblaze/lib/cmpdi2.c @@ -1,4 +1,4 @@ -#include <linux/module.h> +#include <linux/export.h> #include "libgcc.h" diff --git a/arch/microblaze/lib/libgcc.h b/arch/microblaze/lib/libgcc.h index 05909d58e2f..ab077ef7e14 100644 --- a/arch/microblaze/lib/libgcc.h +++ b/arch/microblaze/lib/libgcc.h @@ -22,4 +22,11 @@ typedef union { long long ll; } DWunion; +extern long long __ashldi3(long long u, word_type b); +extern long long __ashrdi3(long long u, word_type b); +extern word_type __cmpdi2(long long a, long long b); +extern long long __lshrdi3(long long u, word_type b); +extern long long __muldi3(long long u, long long v); +extern word_type __ucmpdi2(unsigned long long a, unsigned long long b); + #endif /* __ASM_LIBGCC_H */ diff --git a/arch/microblaze/lib/lshrdi3.c b/arch/microblaze/lib/lshrdi3.c index dcf8d6810b7..adcb253f11c 100644 --- a/arch/microblaze/lib/lshrdi3.c +++ b/arch/microblaze/lib/lshrdi3.c @@ -1,4 +1,4 @@ -#include <linux/module.h> +#include <linux/export.h> #include "libgcc.h" @@ -25,5 +25,4 @@ long long __lshrdi3(long long u, word_type b) return w.ll; } - EXPORT_SYMBOL(__lshrdi3); diff --git a/arch/microblaze/lib/memcpy.c b/arch/microblaze/lib/memcpy.c index fe9c53fafde..f536e81b816 100644 --- a/arch/microblaze/lib/memcpy.c +++ b/arch/microblaze/lib/memcpy.c @@ -24,10 +24,10 @@ * not any responsibility to update it. */ +#include <linux/export.h> #include <linux/types.h> #include <linux/stddef.h> #include <linux/compiler.h> -#include <linux/module.h> #include <linux/string.h> @@ -103,12 +103,12 @@ void *memcpy(void *v_dst, const void *v_src, __kernel_size_t c) } #else /* Load the holding buffer */ - buf_hold = (*i_src++ & 0xFFFFFF00) >>8; + buf_hold = (*i_src++ & 0xFFFFFF00) >> 8; for (; c >= 4; c -= 4) { value = *i_src++; *i_dst++ = buf_hold | ((value & 0xFF) << 24); - buf_hold = (value & 0xFFFFFF00) >>8; + buf_hold = (value & 0xFFFFFF00) >> 8; } #endif /* Realign the source */ @@ -129,12 +129,12 @@ void *memcpy(void *v_dst, const void *v_src, __kernel_size_t c) } #else /* Load the holding buffer */ - buf_hold = (*i_src++ & 0xFFFF0000 )>>16; + buf_hold = (*i_src++ & 0xFFFF0000) >> 16; for (; c >= 4; c -= 4) { value = *i_src++; - *i_dst++ = buf_hold | ((value & 0xFFFF)<<16); - buf_hold = (value & 0xFFFF0000) >>16; + *i_dst++ = buf_hold | ((value & 0xFFFF) << 16); + buf_hold = (value & 0xFFFF0000) >> 16; } #endif /* Realign the source */ diff --git a/arch/microblaze/lib/memmove.c b/arch/microblaze/lib/memmove.c index 2146c3752a8..3611ce70415 100644 --- a/arch/microblaze/lib/memmove.c +++ b/arch/microblaze/lib/memmove.c @@ -24,10 +24,10 @@ * not any responsibility to update it. */ +#include <linux/export.h> #include <linux/types.h> #include <linux/stddef.h> #include <linux/compiler.h> -#include <linux/module.h> #include <linux/string.h> #ifdef __HAVE_ARCH_MEMMOVE @@ -129,7 +129,8 @@ void *memmove(void *v_dst, const void *v_src, __kernel_size_t c) for (; c >= 4; c -= 4) { value = *--i_src; - *--i_dst = buf_hold | ((value & 0xFFFFFF00)>>8); + *--i_dst = buf_hold | + ((value & 0xFFFFFF00) >> 8); buf_hold = (value & 0xFF) << 24; } #endif @@ -155,7 +156,8 @@ void *memmove(void *v_dst, const void *v_src, __kernel_size_t c) for (; c >= 4; c -= 4) { value = *--i_src; - *--i_dst = buf_hold | ((value & 0xFFFF0000)>>16); + *--i_dst = buf_hold | + ((value & 0xFFFF0000) >> 16); buf_hold = (value & 0xFFFF) << 16; } #endif @@ -181,7 +183,8 @@ void *memmove(void *v_dst, const void *v_src, __kernel_size_t c) for (; c >= 4; c -= 4) { value = *--i_src; - *--i_dst = buf_hold | ((value & 0xFF000000)>> 24); + *--i_dst = buf_hold | + ((value & 0xFF000000) >> 24); buf_hold = (value & 0xFFFFFF) << 8; } #endif diff --git a/arch/microblaze/lib/memset.c b/arch/microblaze/lib/memset.c index ddf67939576..04ea72c8a81 100644 --- a/arch/microblaze/lib/memset.c +++ b/arch/microblaze/lib/memset.c @@ -24,10 +24,10 @@ * not any responsibility to update it. */ +#include <linux/export.h> #include <linux/types.h> #include <linux/stddef.h> #include <linux/compiler.h> -#include <linux/module.h> #include <linux/string.h> #ifdef __HAVE_ARCH_MEMSET diff --git a/arch/microblaze/lib/muldi3.c b/arch/microblaze/lib/muldi3.c index 0585bccb7fa..a3f9a03acdc 100644 --- a/arch/microblaze/lib/muldi3.c +++ b/arch/microblaze/lib/muldi3.c @@ -1,33 +1,29 @@ -#include <linux/module.h> +#include <linux/export.h> #include "libgcc.h" -#define DWtype long long -#define UWtype unsigned long -#define UHWtype unsigned short - #define W_TYPE_SIZE 32 -#define __ll_B ((UWtype) 1 << (W_TYPE_SIZE / 2)) -#define __ll_lowpart(t) ((UWtype) (t) & (__ll_B - 1)) -#define __ll_highpart(t) ((UWtype) (t) >> (W_TYPE_SIZE / 2)) +#define __ll_B ((unsigned long) 1 << (W_TYPE_SIZE / 2)) +#define __ll_lowpart(t) ((unsigned long) (t) & (__ll_B - 1)) +#define __ll_highpart(t) ((unsigned long) (t) >> (W_TYPE_SIZE / 2)) /* If we still don't have umul_ppmm, define it using plain C. */ #if !defined(umul_ppmm) #define umul_ppmm(w1, w0, u, v) \ do { \ - UWtype __x0, __x1, __x2, __x3; \ - UHWtype __ul, __vl, __uh, __vh; \ + unsigned long __x0, __x1, __x2, __x3; \ + unsigned short __ul, __vl, __uh, __vh; \ \ __ul = __ll_lowpart(u); \ __uh = __ll_highpart(u); \ __vl = __ll_lowpart(v); \ __vh = __ll_highpart(v); \ \ - __x0 = (UWtype) __ul * __vl; \ - __x1 = (UWtype) __ul * __vh; \ - __x2 = (UWtype) __uh * __vl; \ - __x3 = (UWtype) __uh * __vh; \ + __x0 = (unsigned long) __ul * __vl; \ + __x1 = (unsigned long) __ul * __vh; \ + __x2 = (unsigned long) __uh * __vl; \ + __x3 = (unsigned long) __uh * __vh; \ \ __x1 += __ll_highpart(__x0); /* this can't give carry */\ __x1 += __x2; /* but this indeed can */ \ @@ -47,14 +43,14 @@ }) #endif -DWtype __muldi3(DWtype u, DWtype v) +long long __muldi3(long long u, long long v) { const DWunion uu = {.ll = u}; const DWunion vv = {.ll = v}; DWunion w = {.ll = __umulsidi3(uu.s.low, vv.s.low)}; - w.s.high += ((UWtype) uu.s.low * (UWtype) vv.s.high - + (UWtype) uu.s.high * (UWtype) vv.s.low); + w.s.high += ((unsigned long) uu.s.low * (unsigned long) vv.s.high + + (unsigned long) uu.s.high * (unsigned long) vv.s.low); return w.ll; } diff --git a/arch/microblaze/lib/uaccess_old.S b/arch/microblaze/lib/uaccess_old.S index f085995ee84..0e8cc2710c2 100644 --- a/arch/microblaze/lib/uaccess_old.S +++ b/arch/microblaze/lib/uaccess_old.S @@ -38,15 +38,14 @@ __strncpy_user: addik r3,r7,0 /* temp_count = len */ 1: lbu r4,r6,r0 + beqid r4,2f sb r4,r5,r0 - addik r3,r3,-1 - beqi r3,2f /* break on len */ - addik r5,r5,1 - bneid r4,1b addik r6,r6,1 /* delay slot */ - addik r3,r3,1 /* undo "temp_count--" */ + + addik r3,r3,-1 + bnei r3,1b /* break on len */ 2: rsubk r3,r3,r7 /* temp_count = len - temp_count */ 3: diff --git a/arch/microblaze/lib/ucmpdi2.c b/arch/microblaze/lib/ucmpdi2.c index 63ca105b671..d05f1585121 100644 --- a/arch/microblaze/lib/ucmpdi2.c +++ b/arch/microblaze/lib/ucmpdi2.c @@ -1,4 +1,4 @@ -#include <linux/module.h> +#include <linux/export.h> #include "libgcc.h" diff --git a/arch/microblaze/mm/consistent.c b/arch/microblaze/mm/consistent.c index a1e2e18e096..e10ad930895 100644 --- a/arch/microblaze/mm/consistent.c +++ b/arch/microblaze/mm/consistent.c @@ -13,7 +13,7 @@ * published by the Free Software Foundation. */ -#include <linux/module.h> +#include <linux/export.h> #include <linux/signal.h> #include <linux/sched.h> #include <linux/kernel.h> @@ -37,7 +37,7 @@ #include <asm/pgalloc.h> #include <linux/io.h> #include <linux/hardirq.h> -#include <asm/mmu_context.h> +#include <linux/mmu_context.h> #include <asm/mmu.h> #include <linux/uaccess.h> #include <asm/pgtable.h> @@ -102,8 +102,7 @@ void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *dma_handle) # endif if ((unsigned int)ret > cpuinfo.dcache_base && (unsigned int)ret < cpuinfo.dcache_high) - printk(KERN_WARNING - "ERROR: Your cache coherent area is CACHED!!!\n"); + pr_warn("ERROR: Your cache coherent area is CACHED!!!\n"); /* dma_handle is same as physical (shadowed) address */ *dma_handle = (dma_addr_t)ret; @@ -118,7 +117,7 @@ void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *dma_handle) ret = (void *)va; /* This gives us the real physical address of the first page. */ - *dma_handle = pa = virt_to_bus((void *)vaddr); + *dma_handle = pa = __virt_to_phys(vaddr); #endif /* @@ -177,8 +176,7 @@ void consistent_free(size_t size, void *vaddr) page = virt_to_page(vaddr); do { - ClearPageReserved(page); - __free_page(page); + __free_reserved_page(page); page++; } while (size -= PAGE_SIZE); #else @@ -195,9 +193,7 @@ void consistent_free(size_t size, void *vaddr) pte_clear(&init_mm, (unsigned int)vaddr, ptep); if (pfn_valid(pfn)) { page = pfn_to_page(pfn); - - ClearPageReserved(page); - __free_page(page); + __free_reserved_page(page); } } vaddr += PAGE_SIZE; diff --git a/arch/microblaze/mm/fault.c b/arch/microblaze/mm/fault.c index eb365d6795f..fa4cf52aa7a 100644 --- a/arch/microblaze/mm/fault.c +++ b/arch/microblaze/mm/fault.c @@ -32,7 +32,7 @@ #include <asm/page.h> #include <asm/pgtable.h> #include <asm/mmu.h> -#include <asm/mmu_context.h> +#include <linux/mmu_context.h> #include <linux/uaccess.h> #include <asm/exceptions.h> @@ -92,15 +92,14 @@ void do_page_fault(struct pt_regs *regs, unsigned long address, int code = SEGV_MAPERR; int is_write = error_code & ESR_S; int fault; - unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE | - (is_write ? FAULT_FLAG_WRITE : 0); + unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE; regs->ear = address; regs->esr = error_code; /* On a kernel SLB miss we can only check for a valid exception entry */ if (unlikely(kernel_mode(regs) && (address >= TASK_SIZE))) { - printk(KERN_WARNING "kernel task_size exceed"); + pr_warn("kernel task_size exceed"); _exception(SIGSEGV, regs, code, address); } @@ -114,13 +113,16 @@ void do_page_fault(struct pt_regs *regs, unsigned long address, /* in_atomic() in user mode is really bad, as is current->mm == NULL. */ - printk(KERN_EMERG "Page fault in user mode with " - "in_atomic(), mm = %p\n", mm); - printk(KERN_EMERG "r15 = %lx MSR = %lx\n", + pr_emerg("Page fault in user mode with in_atomic(), mm = %p\n", + mm); + pr_emerg("r15 = %lx MSR = %lx\n", regs->r15, regs->msr); die("Weird page fault", regs, SIGSEGV); } + if (user_mode(regs)) + flags |= FAULT_FLAG_USER; + /* When running in the kernel we expect faults to occur only to * addresses in user space. All other faults represent errors in the * kernel and should generate an OOPS. Unfortunately, in the case of an @@ -199,6 +201,7 @@ good_area: if (unlikely(is_write)) { if (unlikely(!(vma->vm_flags & VM_WRITE))) goto bad_area; + flags |= FAULT_FLAG_WRITE; /* a read */ } else { /* protection fault */ @@ -233,6 +236,7 @@ good_area: current->min_flt++; if (fault & VM_FAULT_RETRY) { flags &= ~FAULT_FLAG_ALLOW_RETRY; + flags |= FAULT_FLAG_TRIED; /* * No need to up_read(&mm->mmap_sem) as we would diff --git a/arch/microblaze/mm/highmem.c b/arch/microblaze/mm/highmem.c index 7d78838e8bf..5a92576fad9 100644 --- a/arch/microblaze/mm/highmem.c +++ b/arch/microblaze/mm/highmem.c @@ -20,8 +20,8 @@ * highmem.h by Benjamin Herrenschmidt (c) 2009 IBM Corp. */ +#include <linux/export.h> #include <linux/highmem.h> -#include <linux/module.h> /* * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c index ce80823051b..77bc7c7e652 100644 --- a/arch/microblaze/mm/init.c +++ b/arch/microblaze/mm/init.c @@ -71,28 +71,17 @@ static void __init highmem_init(void) kmap_prot = PAGE_KERNEL; } -static unsigned long highmem_setup(void) +static void highmem_setup(void) { unsigned long pfn; - unsigned long reservedpages = 0; for (pfn = max_low_pfn; pfn < max_pfn; ++pfn) { struct page *page = pfn_to_page(pfn); /* FIXME not sure about */ - if (memblock_is_reserved(pfn << PAGE_SHIFT)) - continue; - ClearPageReserved(page); - init_page_count(page); - __free_page(page); - totalhigh_pages++; - reservedpages++; + if (!memblock_is_reserved(pfn << PAGE_SHIFT)) + free_highmem_page(page); } - totalram_pages += totalhigh_pages; - printk(KERN_INFO "High memory: %luk\n", - totalhigh_pages << (PAGE_SHIFT-10)); - - return reservedpages; } #endif /* CONFIG_HIGHMEM */ @@ -142,8 +131,8 @@ void __init setup_memory(void) ((u32)_text <= (memory_start + lowmem_size - 1))) { memory_size = lowmem_size; PAGE_OFFSET = memory_start; - printk(KERN_INFO "%s: Main mem: 0x%x, " - "size 0x%08x\n", __func__, (u32) memory_start, + pr_info("%s: Main mem: 0x%x, size 0x%08x\n", + __func__, (u32) memory_start, (u32) memory_size); break; } @@ -158,7 +147,7 @@ void __init setup_memory(void) kernel_align_start = PAGE_DOWN((u32)_text); /* ALIGN can be remove because _end in vmlinux.lds.S is align */ kernel_align_size = PAGE_UP((u32)klimit) - kernel_align_start; - printk(KERN_INFO "%s: kernel addr:0x%08x-0x%08x size=0x%08x\n", + pr_info("%s: kernel addr:0x%08x-0x%08x size=0x%08x\n", __func__, kernel_align_start, kernel_align_start + kernel_align_size, kernel_align_size); memblock_reserve(kernel_align_start, kernel_align_size); @@ -171,20 +160,19 @@ void __init setup_memory(void) * min_low_pfn - the first page (mm/bootmem.c - node_boot_start) * max_low_pfn * max_mapnr - the first unused page (mm/bootmem.c - node_low_pfn) - * num_physpages - number of all pages */ /* memory start is from the kernel end (aligned) to higher addr */ min_low_pfn = memory_start >> PAGE_SHIFT; /* minimum for allocation */ /* RAM is assumed contiguous */ - num_physpages = max_mapnr = memory_size >> PAGE_SHIFT; + max_mapnr = memory_size >> PAGE_SHIFT; max_low_pfn = ((u64)memory_start + (u64)lowmem_size) >> PAGE_SHIFT; max_pfn = ((u64)memory_start + (u64)memory_size) >> PAGE_SHIFT; - printk(KERN_INFO "%s: max_mapnr: %#lx\n", __func__, max_mapnr); - printk(KERN_INFO "%s: min_low_pfn: %#lx\n", __func__, min_low_pfn); - printk(KERN_INFO "%s: max_low_pfn: %#lx\n", __func__, max_low_pfn); - printk(KERN_INFO "%s: max_pfn: %#lx\n", __func__, max_pfn); + pr_info("%s: max_mapnr: %#lx\n", __func__, max_mapnr); + pr_info("%s: min_low_pfn: %#lx\n", __func__, min_low_pfn); + pr_info("%s: max_low_pfn: %#lx\n", __func__, max_low_pfn); + pr_info("%s: max_pfn: %#lx\n", __func__, max_pfn); /* * Find an area to use for the bootmem bitmap. @@ -204,7 +192,8 @@ void __init setup_memory(void) start_pfn = memblock_region_memory_base_pfn(reg); end_pfn = memblock_region_memory_end_pfn(reg); memblock_set_node(start_pfn << PAGE_SHIFT, - (end_pfn - start_pfn) << PAGE_SHIFT, 0); + (end_pfn - start_pfn) << PAGE_SHIFT, + &memblock.memory, 0); } /* free bootmem is whole main memory */ @@ -236,84 +225,29 @@ void __init setup_memory(void) paging_init(); } -void free_init_pages(char *what, unsigned long begin, unsigned long end) -{ - unsigned long addr; - - for (addr = begin; addr < end; addr += PAGE_SIZE) { - ClearPageReserved(virt_to_page(addr)); - init_page_count(virt_to_page(addr)); - free_page(addr); - totalram_pages++; - } - printk(KERN_INFO "Freeing %s: %ldk freed\n", what, (end - begin) >> 10); -} - #ifdef CONFIG_BLK_DEV_INITRD void free_initrd_mem(unsigned long start, unsigned long end) { - int pages = 0; - for (; start < end; start += PAGE_SIZE) { - ClearPageReserved(virt_to_page(start)); - init_page_count(virt_to_page(start)); - free_page(start); - totalram_pages++; - pages++; - } - printk(KERN_NOTICE "Freeing initrd memory: %dk freed\n", - (int)(pages * (PAGE_SIZE / 1024))); + free_reserved_area((void *)start, (void *)end, -1, "initrd"); } #endif void free_initmem(void) { - free_init_pages("unused kernel memory", - (unsigned long)(&__init_begin), - (unsigned long)(&__init_end)); + free_initmem_default(-1); } void __init mem_init(void) { - pg_data_t *pgdat; - unsigned long reservedpages = 0, codesize, initsize, datasize, bsssize; - high_memory = (void *)__va(memory_start + lowmem_size - 1); /* this will put all memory onto the freelists */ - totalram_pages += free_all_bootmem(); - - for_each_online_pgdat(pgdat) { - unsigned long i; - struct page *page; - - for (i = 0; i < pgdat->node_spanned_pages; i++) { - if (!pfn_valid(pgdat->node_start_pfn + i)) - continue; - page = pgdat_page_nr(pgdat, i); - if (PageReserved(page)) - reservedpages++; - } - } - + free_all_bootmem(); #ifdef CONFIG_HIGHMEM - reservedpages -= highmem_setup(); + highmem_setup(); #endif - codesize = (unsigned long)&_sdata - (unsigned long)&_stext; - datasize = (unsigned long)&_edata - (unsigned long)&_sdata; - initsize = (unsigned long)&__init_end - (unsigned long)&__init_begin; - bsssize = (unsigned long)&__bss_stop - (unsigned long)&__bss_start; - - pr_info("Memory: %luk/%luk available (%luk kernel code, " - "%luk reserved, %luk data, %luk bss, %luk init)\n", - nr_free_pages() << (PAGE_SHIFT-10), - num_physpages << (PAGE_SHIFT-10), - codesize >> 10, - reservedpages << (PAGE_SHIFT-10), - datasize >> 10, - bsssize >> 10, - initsize >> 10); - + mem_init_print_info(NULL); #ifdef CONFIG_MMU pr_info("Kernel virtual memory layout:\n"); pr_info(" * 0x%08lx..0x%08lx : fixmap\n", FIXADDR_START, FIXADDR_TOP); @@ -394,17 +328,17 @@ asmlinkage void __init mmu_init(void) unsigned int kstart, ksize; if (!memblock.reserved.cnt) { - printk(KERN_EMERG "Error memory count\n"); + pr_emerg("Error memory count\n"); machine_restart(NULL); } if ((u32) memblock.memory.regions[0].size < 0x400000) { - printk(KERN_EMERG "Memory must be greater than 4MB\n"); + pr_emerg("Memory must be greater than 4MB\n"); machine_restart(NULL); } if ((u32) memblock.memory.regions[0].size < kernel_tlb) { - printk(KERN_EMERG "Kernel size is greater than memory node\n"); + pr_emerg("Kernel size is greater than memory node\n"); machine_restart(NULL); } @@ -432,10 +366,11 @@ asmlinkage void __init mmu_init(void) #if defined(CONFIG_BLK_DEV_INITRD) /* Remove the init RAM disk from the available memory. */ -/* if (initrd_start) { - mem_pieces_remove(&phys_avail, __pa(initrd_start), - initrd_end - initrd_start, 1); - }*/ + if (initrd_start) { + unsigned long size; + size = initrd_end - initrd_start; + memblock_reserve(__virt_to_phys(initrd_start), size); + } #endif /* CONFIG_BLK_DEV_INITRD */ /* Initialize the MMU hardware */ diff --git a/arch/microblaze/mm/pgtable.c b/arch/microblaze/mm/pgtable.c index d1c06d07fed..4f4520e779a 100644 --- a/arch/microblaze/mm/pgtable.c +++ b/arch/microblaze/mm/pgtable.c @@ -26,8 +26,8 @@ * */ +#include <linux/export.h> #include <linux/kernel.h> -#include <linux/module.h> #include <linux/types.h> #include <linux/vmalloc.h> #include <linux/init.h> @@ -39,8 +39,6 @@ #include <asm/sections.h> #include <asm/fixmap.h> -#define flush_HPTE(X, va, pg) _tlbie(va) - unsigned long ioremap_base; unsigned long ioremap_bot; EXPORT_SYMBOL(ioremap_bot); @@ -71,13 +69,13 @@ static void __iomem *__ioremap(phys_addr_t addr, unsigned long size, * * However, allow remap of rootfs: TBD */ + if (mem_init_done && p >= memory_start && p < virt_to_phys(high_memory) && - !(p >= virt_to_phys((unsigned long)&__bss_stop) && - p < virt_to_phys((unsigned long)__bss_stop))) { - printk(KERN_WARNING "__ioremap(): phys addr "PTE_FMT - " is RAM lr %pf\n", (unsigned long)p, - __builtin_return_address(0)); + !(p >= __virt_to_phys((phys_addr_t)__bss_stop) && + p < __virt_to_phys((phys_addr_t)__bss_stop))) { + pr_warn("__ioremap(): phys addr "PTE_FMT" is RAM lr %pf\n", + (unsigned long)p, __builtin_return_address(0)); return NULL; } @@ -128,9 +126,10 @@ void __iomem *ioremap(phys_addr_t addr, unsigned long size) } EXPORT_SYMBOL(ioremap); -void iounmap(void *addr) +void iounmap(void __iomem *addr) { - if (addr > high_memory && (unsigned long) addr < ioremap_bot) + if ((__force void *)addr > high_memory && + (unsigned long) addr < ioremap_bot) vfree((void *) (PAGE_MASK & (unsigned long) addr)); } EXPORT_SYMBOL(iounmap); @@ -152,8 +151,7 @@ int map_page(unsigned long va, phys_addr_t pa, int flags) set_pte_at(&init_mm, va, pg, pfn_pte(pa >> PAGE_SHIFT, __pgprot(flags))); if (unlikely(mem_init_done)) - flush_HPTE(0, va, pmd_val(*pd)); - /* flush_HPTE(0, va, pg); */ + _tlbie(va); } return err; } diff --git a/arch/microblaze/pci/indirect_pci.c b/arch/microblaze/pci/indirect_pci.c index 4196eb6bd76..ae4fca46c9f 100644 --- a/arch/microblaze/pci/indirect_pci.c +++ b/arch/microblaze/pci/indirect_pci.c @@ -15,7 +15,7 @@ #include <linux/string.h> #include <linux/init.h> -#include <asm/io.h> +#include <linux/io.h> #include <asm/prom.h> #include <asm/pci-bridge.h> diff --git a/arch/microblaze/pci/iomap.c b/arch/microblaze/pci/iomap.c index b07abbac031..94149f5e6eb 100644 --- a/arch/microblaze/pci/iomap.c +++ b/arch/microblaze/pci/iomap.c @@ -7,7 +7,7 @@ #include <linux/pci.h> #include <linux/mm.h> #include <linux/export.h> -#include <asm/io.h> +#include <linux/io.h> #include <asm/pci-bridge.h> void pci_iounmap(struct pci_dev *dev, void __iomem *addr) diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c index ed22bfc5db1..9037914f698 100644 --- a/arch/microblaze/pci/pci-common.c +++ b/arch/microblaze/pci/pci-common.c @@ -29,11 +29,12 @@ #include <linux/slab.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/of_irq.h> #include <linux/of_pci.h> #include <linux/export.h> #include <asm/processor.h> -#include <asm/io.h> +#include <linux/io.h> #include <asm/pci-bridge.h> #include <asm/byteorder.h> @@ -46,24 +47,9 @@ static int global_phb_number; /* Global phb counter */ /* ISA Memory physical address */ resource_size_t isa_mem_base; -static struct dma_map_ops *pci_dma_ops = &dma_direct_ops; - unsigned long isa_io_base; -unsigned long pci_dram_offset; static int pci_bus_count; - -void set_pci_dma_ops(struct dma_map_ops *dma_ops) -{ - pci_dma_ops = dma_ops; -} - -struct dma_map_ops *get_pci_dma_ops(void) -{ - return pci_dma_ops; -} -EXPORT_SYMBOL(get_pci_dma_ops); - struct pci_controller *pcibios_alloc_controller(struct device_node *dev) { struct pci_controller *phb; @@ -167,107 +153,11 @@ struct pci_controller *pci_find_hose_for_OF_device(struct device_node *node) return NULL; } -static ssize_t pci_show_devspec(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct pci_dev *pdev; - struct device_node *np; - - pdev = to_pci_dev(dev); - np = pci_device_to_OF_node(pdev); - if (np == NULL || np->full_name == NULL) - return 0; - return sprintf(buf, "%s", np->full_name); -} -static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL); - -/* Add sysfs properties */ -int pcibios_add_platform_entries(struct pci_dev *pdev) -{ - return device_create_file(&pdev->dev, &dev_attr_devspec); -} - void pcibios_set_master(struct pci_dev *dev) { /* No special bus mastering setup handling */ } -char __devinit *pcibios_setup(char *str) -{ - return str; -} - -/* - * Reads the interrupt pin to determine if interrupt is use by card. - * If the interrupt is used, then gets the interrupt line from the - * openfirmware and sets it in the pci_dev and pci_config line. - */ -int pci_read_irq_line(struct pci_dev *pci_dev) -{ - struct of_irq oirq; - unsigned int virq; - - /* The current device-tree that iSeries generates from the HV - * PCI informations doesn't contain proper interrupt routing, - * and all the fallback would do is print out crap, so we - * don't attempt to resolve the interrupts here at all, some - * iSeries specific fixup does it. - * - * In the long run, we will hopefully fix the generated device-tree - * instead. - */ - pr_debug("PCI: Try to map irq for %s...\n", pci_name(pci_dev)); - -#ifdef DEBUG - memset(&oirq, 0xff, sizeof(oirq)); -#endif - /* Try to get a mapping from the device-tree */ - if (of_irq_map_pci(pci_dev, &oirq)) { - u8 line, pin; - - /* If that fails, lets fallback to what is in the config - * space and map that through the default controller. We - * also set the type to level low since that's what PCI - * interrupts are. If your platform does differently, then - * either provide a proper interrupt tree or don't use this - * function. - */ - if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &pin)) - return -1; - if (pin == 0) - return -1; - if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &line) || - line == 0xff || line == 0) { - return -1; - } - pr_debug(" No map ! Using line %d (pin %d) from PCI config\n", - line, pin); - - virq = irq_create_mapping(NULL, line); - if (virq) - irq_set_irq_type(virq, IRQ_TYPE_LEVEL_LOW); - } else { - pr_debug(" Got one, spec %d cells (0x%08x 0x%08x...) on %s\n", - oirq.size, oirq.specifier[0], oirq.specifier[1], - oirq.controller ? oirq.controller->full_name : - "<default>"); - - virq = irq_create_of_mapping(oirq.controller, oirq.specifier, - oirq.size); - } - if (!virq) { - pr_debug(" Failed to map !\n"); - return -1; - } - - pr_debug(" Mapped to linux irq %d\n", virq); - - pci_dev->irq = virq; - - return 0; -} -EXPORT_SYMBOL(pci_read_irq_line); - /* * Platform support for /proc/bus/pci/X/Y mmap()s, * modelled on the sparc64 implementation by Dave Miller. @@ -293,7 +183,7 @@ static struct resource *__pci_mmap_make_offset(struct pci_dev *dev, unsigned long io_offset = 0; int i, res_bit; - if (hose == 0) + if (!hose) return NULL; /* should never happen */ /* If memory, add on the PCI bridge address offset */ @@ -558,11 +448,10 @@ int pci_mmap_legacy_page_range(struct pci_bus *bus, */ if ((offset + size) > hose->isa_mem_size) { #ifdef CONFIG_MMU - printk(KERN_DEBUG - "Process %s (pid:%d) mapped non-existing PCI" - "legacy memory for 0%04x:%02x\n", - current->comm, current->pid, pci_domain_nr(bus), - bus->number); + pr_debug("Process %s (pid:%d) mapped non-existing PCI", + current->comm, current->pid); + pr_debug("legacy memory for 0%04x:%02x\n", + pci_domain_nr(bus), bus->number); #endif if (vma->vm_flags & VM_SHARED) return shmem_zero_setup(vma); @@ -570,7 +459,7 @@ int pci_mmap_legacy_page_range(struct pci_bus *bus, } offset += hose->isa_mem_phys; } else { - unsigned long io_offset = (unsigned long)hose->io_base_virt - \ + unsigned long io_offset = (unsigned long)hose->io_base_virt - _IO_BASE; unsigned long roffset = offset + io_offset; rp = &hose->io_resource; @@ -661,84 +550,58 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar, * - Some 32 bits platforms such as 4xx can have physical space larger than * 32 bits so we need to use 64 bits values for the parsing */ -void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose, - struct device_node *dev, - int primary) +void pci_process_bridge_OF_ranges(struct pci_controller *hose, + struct device_node *dev, int primary) { - const u32 *ranges; - int rlen; - int pna = of_n_addr_cells(dev); - int np = pna + 5; int memno = 0, isa_hole = -1; - u32 pci_space; - unsigned long long pci_addr, cpu_addr, pci_next, cpu_next, size; unsigned long long isa_mb = 0; struct resource *res; + struct of_pci_range range; + struct of_pci_range_parser parser; - printk(KERN_INFO "PCI host bridge %s %s ranges:\n", + pr_info("PCI host bridge %s %s ranges:\n", dev->full_name, primary ? "(primary)" : ""); - /* Get ranges property */ - ranges = of_get_property(dev, "ranges", &rlen); - if (ranges == NULL) + /* Check for ranges property */ + if (of_pci_range_parser_init(&parser, dev)) return; - /* Parse it */ pr_debug("Parsing ranges property...\n"); - while ((rlen -= np * 4) >= 0) { + for_each_of_pci_range(&parser, &range) { /* Read next ranges element */ - pci_space = ranges[0]; - pci_addr = of_read_number(ranges + 1, 2); - cpu_addr = of_translate_address(dev, ranges + 3); - size = of_read_number(ranges + pna + 3, 2); - - pr_debug("pci_space: 0x%08x pci_addr:0x%016llx " - "cpu_addr:0x%016llx size:0x%016llx\n", - pci_space, pci_addr, cpu_addr, size); - - ranges += np; + pr_debug("pci_space: 0x%08x pci_addr:0x%016llx ", + range.pci_space, range.pci_addr); + pr_debug("cpu_addr:0x%016llx size:0x%016llx\n", + range.cpu_addr, range.size); /* If we failed translation or got a zero-sized region * (some FW try to feed us with non sensical zero sized regions * such as power3 which look like some kind of attempt * at exposing the VGA memory hole) */ - if (cpu_addr == OF_BAD_ADDR || size == 0) + if (range.cpu_addr == OF_BAD_ADDR || range.size == 0) continue; - /* Now consume following elements while they are contiguous */ - for (; rlen >= np * sizeof(u32); - ranges += np, rlen -= np * 4) { - if (ranges[0] != pci_space) - break; - pci_next = of_read_number(ranges + 1, 2); - cpu_next = of_translate_address(dev, ranges + 3); - if (pci_next != pci_addr + size || - cpu_next != cpu_addr + size) - break; - size += of_read_number(ranges + pna + 3, 2); - } - /* Act based on address space type */ res = NULL; - switch ((pci_space >> 24) & 0x3) { - case 1: /* PCI IO space */ - printk(KERN_INFO - " IO 0x%016llx..0x%016llx -> 0x%016llx\n", - cpu_addr, cpu_addr + size - 1, pci_addr); + switch (range.flags & IORESOURCE_TYPE_BITS) { + case IORESOURCE_IO: + pr_info(" IO 0x%016llx..0x%016llx -> 0x%016llx\n", + range.cpu_addr, range.cpu_addr + range.size - 1, + range.pci_addr); /* We support only one IO range */ if (hose->pci_io_size) { - printk(KERN_INFO - " \\--> Skipped (too many) !\n"); + pr_info(" \\--> Skipped (too many) !\n"); continue; } /* On 32 bits, limit I/O space to 16MB */ - if (size > 0x01000000) - size = 0x01000000; + if (range.size > 0x01000000) + range.size = 0x01000000; /* 32 bits needs to map IOs here */ - hose->io_base_virt = ioremap(cpu_addr, size); + hose->io_base_virt = ioremap(range.cpu_addr, + range.size); /* Expect trouble if pci_addr is not 0 */ if (primary) @@ -747,35 +610,34 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose, /* pci_io_size and io_base_phys always represent IO * space starting at 0 so we factor in pci_addr */ - hose->pci_io_size = pci_addr + size; - hose->io_base_phys = cpu_addr - pci_addr; + hose->pci_io_size = range.pci_addr + range.size; + hose->io_base_phys = range.cpu_addr - range.pci_addr; /* Build resource */ res = &hose->io_resource; - res->flags = IORESOURCE_IO; - res->start = pci_addr; + range.cpu_addr = range.pci_addr; + break; - case 2: /* PCI Memory space */ - case 3: /* PCI 64 bits Memory space */ - printk(KERN_INFO - " MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n", - cpu_addr, cpu_addr + size - 1, pci_addr, - (pci_space & 0x40000000) ? "Prefetch" : ""); + case IORESOURCE_MEM: + pr_info(" MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n", + range.cpu_addr, range.cpu_addr + range.size - 1, + range.pci_addr, + (range.pci_space & 0x40000000) ? + "Prefetch" : ""); /* We support only 3 memory ranges */ if (memno >= 3) { - printk(KERN_INFO - " \\--> Skipped (too many) !\n"); + pr_info(" \\--> Skipped (too many) !\n"); continue; } /* Handles ISA memory hole space here */ - if (pci_addr == 0) { - isa_mb = cpu_addr; + if (range.pci_addr == 0) { + isa_mb = range.cpu_addr; isa_hole = memno; if (primary || isa_mem_base == 0) - isa_mem_base = cpu_addr; - hose->isa_mem_phys = cpu_addr; - hose->isa_mem_size = size; + isa_mem_base = range.cpu_addr; + hose->isa_mem_phys = range.cpu_addr; + hose->isa_mem_size = range.size; } /* We get the PCI/Mem offset from the first range or @@ -783,31 +645,23 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose, * hole. If they don't match, bugger. */ if (memno == 0 || - (isa_hole >= 0 && pci_addr != 0 && + (isa_hole >= 0 && range.pci_addr != 0 && hose->pci_mem_offset == isa_mb)) - hose->pci_mem_offset = cpu_addr - pci_addr; - else if (pci_addr != 0 && - hose->pci_mem_offset != cpu_addr - pci_addr) { - printk(KERN_INFO - " \\--> Skipped (offset mismatch) !\n"); + hose->pci_mem_offset = range.cpu_addr - + range.pci_addr; + else if (range.pci_addr != 0 && + hose->pci_mem_offset != range.cpu_addr - + range.pci_addr) { + pr_info(" \\--> Skipped (offset mismatch) !\n"); continue; } /* Build resource */ res = &hose->mem_resources[memno++]; - res->flags = IORESOURCE_MEM; - if (pci_space & 0x40000000) - res->flags |= IORESOURCE_PREFETCH; - res->start = cpu_addr; break; } - if (res != NULL) { - res->name = dev->full_name; - res->end = res->start + size - 1; - res->parent = NULL; - res->sibling = NULL; - res->child = NULL; - } + if (res != NULL) + of_pci_range_to_resource(&range, dev, res); } /* If there's an ISA hole and the pci_mem_offset is -not- matching @@ -816,7 +670,7 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose, */ if (isa_hole >= 0 && hose->pci_mem_offset != isa_mb) { unsigned int next = isa_hole + 1; - printk(KERN_INFO " Removing ISA hole at 0x%016llx\n", isa_mb); + pr_info(" Removing ISA hole at 0x%016llx\n", isa_mb); if (next < memno) memmove(&hose->mem_resources[isa_hole], &hose->mem_resources[next], @@ -828,21 +682,19 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose, /* Decide whether to display the domain number in /proc */ int pci_proc_domain(struct pci_bus *bus) { - struct pci_controller *hose = pci_bus_to_host(bus); - return 0; } /* This header fixup will do the resource fixup for all devices as they are * probed, but not for bridge ranges */ -static void __devinit pcibios_fixup_resources(struct pci_dev *dev) +static void pcibios_fixup_resources(struct pci_dev *dev) { struct pci_controller *hose = pci_bus_to_host(dev->bus); int i; if (!hose) { - printk(KERN_ERR "No host bridge for PCI dev %s !\n", + pr_err("No host bridge for PCI dev %s !\n", pci_name(dev)); return; } @@ -851,12 +703,12 @@ static void __devinit pcibios_fixup_resources(struct pci_dev *dev) if (!res->flags) continue; if (res->start == 0) { - pr_debug("PCI:%s Resource %d %016llx-%016llx [%x]" \ - "is unassigned\n", + pr_debug("PCI:%s Resource %d %016llx-%016llx [%x]", pci_name(dev), i, (unsigned long long)res->start, (unsigned long long)res->end, (unsigned int)res->flags); + pr_debug("is unassigned\n"); res->end -= res->start; res->start = 0; res->flags |= IORESOURCE_UNSET; @@ -865,7 +717,7 @@ static void __devinit pcibios_fixup_resources(struct pci_dev *dev) pr_debug("PCI:%s Resource %d %016llx-%016llx [%x]\n", pci_name(dev), i, - (unsigned long long)res->start,\ + (unsigned long long)res->start, (unsigned long long)res->end, (unsigned int)res->flags); } @@ -877,8 +729,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_resources); * things go more smoothly when it gets it right. It should covers cases such * as Apple "closed" bridge resources and bare-metal pSeries unassigned bridges */ -static int __devinit pcibios_uninitialized_bridge_resource(struct pci_bus *bus, - struct resource *res) +static int pcibios_uninitialized_bridge_resource(struct pci_bus *bus, + struct resource *res) { struct pci_controller *hose = pci_bus_to_host(bus); struct pci_dev *dev = bus->self; @@ -939,7 +791,7 @@ static int __devinit pcibios_uninitialized_bridge_resource(struct pci_bus *bus, } /* Fixup resources of a PCI<->PCI bridge */ -static void __devinit pcibios_fixup_bridge(struct pci_bus *bus) +static void pcibios_fixup_bridge(struct pci_bus *bus) { struct resource *res; int i; @@ -956,7 +808,7 @@ static void __devinit pcibios_fixup_bridge(struct pci_bus *bus) pr_debug("PCI:%s Bus rsrc %d %016llx-%016llx [%x] fixup...\n", pci_name(dev), i, - (unsigned long long)res->start,\ + (unsigned long long)res->start, (unsigned long long)res->end, (unsigned int)res->flags); @@ -976,14 +828,14 @@ static void __devinit pcibios_fixup_bridge(struct pci_bus *bus) } } -void __devinit pcibios_setup_bus_self(struct pci_bus *bus) +void pcibios_setup_bus_self(struct pci_bus *bus) { /* Fix up the bus resources for P2P bridges */ if (bus->self != NULL) pcibios_fixup_bridge(bus); } -void __devinit pcibios_setup_bus_devices(struct pci_bus *bus) +void pcibios_setup_bus_devices(struct pci_bus *bus) { struct pci_dev *dev; @@ -999,16 +851,12 @@ void __devinit pcibios_setup_bus_devices(struct pci_bus *bus) */ set_dev_node(&dev->dev, pcibus_to_node(dev->bus)); - /* Hook up default DMA ops */ - set_dma_ops(&dev->dev, pci_dma_ops); - dev->dev.archdata.dma_data = (void *)PCI_DRAM_OFFSET; - /* Read default IRQs and fixup if necessary */ - pci_read_irq_line(dev); + dev->irq = of_irq_parse_and_map_pci(dev, 0, 0); } } -void __devinit pcibios_fixup_bus(struct pci_bus *bus) +void pcibios_fixup_bus(struct pci_bus *bus) { /* When called from the generic PCI probe, read PCI<->PCI bridge * bases. This is -not- called when generating the PCI tree from @@ -1130,7 +978,7 @@ static int __init reparent_resources(struct resource *parent, * as well. */ -void pcibios_allocate_bus_resources(struct pci_bus *bus) +static void pcibios_allocate_bus_resources(struct pci_bus *bus) { struct pci_bus *b; int i; @@ -1163,12 +1011,12 @@ void pcibios_allocate_bus_resources(struct pci_bus *bus) } } - pr_debug("PCI: %s (bus %d) bridge rsrc %d: %016llx-%016llx " - "[0x%x], parent %p (%s)\n", + pr_debug("PCI: %s (bus %d) bridge rsrc %d: %016llx-%016llx ", bus->self ? pci_name(bus->self) : "PHB", bus->number, i, (unsigned long long)res->start, - (unsigned long long)res->end, + (unsigned long long)res->end); + pr_debug("[0x%x], parent %p (%s)\n", (unsigned int)res->flags, pr, (pr && pr->name) ? pr->name : "nil"); @@ -1183,9 +1031,8 @@ void pcibios_allocate_bus_resources(struct pci_bus *bus) if (reparent_resources(pr, res) == 0) continue; } - printk(KERN_WARNING "PCI: Cannot allocate resource region " - "%d of PCI bridge %d, will remap\n", i, bus->number); -clear_resource: + pr_warn("PCI: Cannot allocate resource region "); + pr_cont("%d of PCI bridge %d, will remap\n", i, bus->number); res->start = res->end = 0; res->flags = 0; } @@ -1194,7 +1041,7 @@ clear_resource: pcibios_allocate_bus_resources(b); } -static inline void __devinit alloc_resource(struct pci_dev *dev, int idx) +static inline void alloc_resource(struct pci_dev *dev, int idx) { struct resource *pr, *r = &dev->resource[idx]; @@ -1207,8 +1054,8 @@ static inline void __devinit alloc_resource(struct pci_dev *dev, int idx) pr = pci_find_parent_resource(dev, r); if (!pr || (pr->flags & IORESOURCE_UNSET) || request_resource(pr, r) < 0) { - printk(KERN_WARNING "PCI: Cannot allocate resource region %d" - " of device %s, will remap\n", idx, pci_name(dev)); + pr_warn("PCI: Cannot allocate resource region %d ", idx); + pr_cont("of device %s, will remap\n", pci_name(dev)); if (pr) pr_debug("PCI: parent is %p: %016llx-%016llx [%x]\n", pr, @@ -1291,8 +1138,7 @@ static void __init pcibios_reserve_legacy_regions(struct pci_bus *bus) res->end = (offset + 0xfff) & 0xfffffffful; pr_debug("Candidate legacy IO: %pR\n", res); if (request_resource(&hose->io_resource, res)) { - printk(KERN_DEBUG - "PCI %04x:%02x Cannot reserve Legacy IO %pR\n", + pr_debug("PCI %04x:%02x Cannot reserve Legacy IO %pR\n", pci_domain_nr(bus), bus->number, res); kfree(res); } @@ -1320,8 +1166,7 @@ static void __init pcibios_reserve_legacy_regions(struct pci_bus *bus) res->end = 0xbffff + offset; pr_debug("Candidate VGA memory: %pR\n", res); if (request_resource(pres, res)) { - printk(KERN_DEBUG - "PCI %04x:%02x Cannot reserve VGA memory %pR\n", + pr_debug("PCI %04x:%02x Cannot reserve VGA memory %pR\n", pci_domain_nr(bus), bus->number, res); kfree(res); } @@ -1352,14 +1197,12 @@ void __init pcibios_resource_survey(void) pci_assign_unassigned_resources(); } -#ifdef CONFIG_HOTPLUG - /* This is used by the PCI hotplug driver to allocate resource * of newly plugged busses. We can try to consolidate with the * rest of the code later, for now, keep it as-is as our main * resource allocation function doesn't deal with sub-trees yet. */ -void __devinit pcibios_claim_one_bus(struct pci_bus *bus) +void pcibios_claim_one_bus(struct pci_bus *bus) { struct pci_dev *dev; struct pci_bus *child_bus; @@ -1373,10 +1216,9 @@ void __devinit pcibios_claim_one_bus(struct pci_bus *bus) if (r->parent || !r->start || !r->flags) continue; - pr_debug("PCI: Claiming %s: " - "Resource %d: %016llx..%016llx [%x]\n", - pci_name(dev), i, - (unsigned long long)r->start, + pr_debug("PCI: Claiming %s: ", pci_name(dev)); + pr_debug("Resource %d: %016llx..%016llx [%x]\n", + i, (unsigned long long)r->start, (unsigned long long)r->end, (unsigned int)r->flags); @@ -1413,14 +1255,8 @@ void pcibios_finish_adding_to_bus(struct pci_bus *bus) } EXPORT_SYMBOL_GPL(pcibios_finish_adding_to_bus); -#endif /* CONFIG_HOTPLUG */ - -int pcibios_enable_device(struct pci_dev *dev, int mask) -{ - return pci_enable_resources(dev, mask); -} - -static void __devinit pcibios_setup_phb_resources(struct pci_controller *hose, struct list_head *resources) +static void pcibios_setup_phb_resources(struct pci_controller *hose, + struct list_head *resources) { unsigned long io_offset; struct resource *res; @@ -1435,15 +1271,16 @@ static void __devinit pcibios_setup_phb_resources(struct pci_controller *hose, s res->end = (res->end + io_offset) & 0xffffffffu; if (!res->flags) { - printk(KERN_WARNING "PCI: I/O resource not set for host" - " bridge %s (domain %d)\n", - hose->dn->full_name, hose->global_number); + pr_warn("PCI: I/O resource not set for host "); + pr_cont("bridge %s (domain %d)\n", + hose->dn->full_name, hose->global_number); /* Workaround for lack of IO resource only on 32-bit */ res->start = (unsigned long)hose->io_base_virt - isa_io_base; res->end = res->start + IO_SPACE_LIMIT; res->flags = IORESOURCE_IO; } - pci_add_resource_offset(resources, res, hose->io_base_virt - _IO_BASE); + pci_add_resource_offset(resources, res, + (__force resource_size_t)(hose->io_base_virt - _IO_BASE)); pr_debug("PCI: PHB IO resource = %016llx-%016llx [%lx]\n", (unsigned long long)res->start, @@ -1456,9 +1293,9 @@ static void __devinit pcibios_setup_phb_resources(struct pci_controller *hose, s if (!res->flags) { if (i > 0) continue; - printk(KERN_ERR "PCI: Memory resource 0 not set for " - "host bridge %s (domain %d)\n", - hose->dn->full_name, hose->global_number); + pr_err("PCI: Memory resource 0 not set for "); + pr_cont("host bridge %s (domain %d)\n", + hose->dn->full_name, hose->global_number); /* Workaround for lack of MEM resource only on 32-bit */ res->start = hose->pci_mem_offset; @@ -1487,29 +1324,28 @@ struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus) return of_node_get(hose->dn); } -static void __devinit pcibios_scan_phb(struct pci_controller *hose) +static void pcibios_scan_phb(struct pci_controller *hose) { LIST_HEAD(resources); struct pci_bus *bus; struct device_node *node = hose->dn; - pr_debug("PCI: Scanning PHB %s\n", - node ? node->full_name : "<NO NAME>"); + pr_debug("PCI: Scanning PHB %s\n", of_node_full_name(node)); pcibios_setup_phb_resources(hose, &resources); bus = pci_scan_root_bus(hose->parent, hose->first_busno, hose->ops, hose, &resources); if (bus == NULL) { - printk(KERN_ERR "Failed to create bus for PCI domain %04x\n", + pr_err("Failed to create bus for PCI domain %04x\n", hose->global_number); pci_free_resource_list(&resources); return; } - bus->secondary = hose->first_busno; + bus->busn_res.start = hose->first_busno; hose->bus = bus; - hose->last_busno = bus->subordinate; + hose->last_busno = bus->busn_res.end; } static int __init pcibios_init(void) @@ -1517,7 +1353,7 @@ static int __init pcibios_init(void) struct pci_controller *hose, *tmp; int next_busno = 0; - printk(KERN_INFO "PCI: Probing PCI hardware\n"); + pr_info("PCI: Probing PCI hardware\n"); /* Scan all of the recorded PCI controllers. */ list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { @@ -1617,7 +1453,7 @@ fake_pci_bus(struct pci_controller *hose, int busnr) static struct pci_bus bus; if (!hose) - printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr); + pr_err("Can't find hose for PCI bus %d!\n", busnr); bus.number = busnr; bus.sysdata = hose; diff --git a/arch/microblaze/pci/xilinx_pci.c b/arch/microblaze/pci/xilinx_pci.c index 0687a42a5bd..14c7da5fd03 100644 --- a/arch/microblaze/pci/xilinx_pci.c +++ b/arch/microblaze/pci/xilinx_pci.c @@ -18,7 +18,7 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/pci.h> -#include <asm/io.h> +#include <linux/io.h> #define XPLB_PCI_ADDR 0x10c #define XPLB_PCI_DATA 0x110 @@ -82,7 +82,7 @@ xilinx_pci_exclude_device(struct pci_controller *hose, u_char bus, u8 devfn) * * List pci devices in very early phase. */ -void __init xilinx_early_pci_scan(struct pci_controller *hose) +static void __init xilinx_early_pci_scan(struct pci_controller *hose) { u32 bus = 0; u32 val, dev, func, offset; @@ -91,27 +91,27 @@ void __init xilinx_early_pci_scan(struct pci_controller *hose) for (dev = 0; dev < 2; dev++) { /* List only first function number - up-to 8 functions */ for (func = 0; func < 1; func++) { - printk(KERN_INFO "%02x:%02x:%02x", bus, dev, func); + pr_info("%02x:%02x:%02x", bus, dev, func); /* read the first 64 standardized bytes */ /* Up-to 192 bytes can be list of capabilities */ for (offset = 0; offset < 64; offset += 4) { early_read_config_dword(hose, bus, PCI_DEVFN(dev, func), offset, &val); if (offset == 0 && val == 0xFFFFFFFF) { - printk(KERN_CONT "\nABSENT"); + pr_cont("\nABSENT"); break; } if (!(offset % 0x10)) - printk(KERN_CONT "\n%04x: ", offset); + pr_cont("\n%04x: ", offset); - printk(KERN_CONT "%08x ", val); + pr_cont("%08x ", val); } - printk(KERN_INFO "\n"); + pr_info("\n"); } } } #else -void __init xilinx_early_pci_scan(struct pci_controller *hose) +static void __init xilinx_early_pci_scan(struct pci_controller *hose) { } #endif diff --git a/arch/microblaze/platform/Makefile b/arch/microblaze/platform/Makefile deleted file mode 100644 index ea1b75cc577..00000000000 --- a/arch/microblaze/platform/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# -# Makefile for arch/microblaze/platform directory -# -#obj-$(CONFIG_PLATFORM_GENERIC) += generic/ - -obj-y += platform.o diff --git a/arch/microblaze/platform/generic/Kconfig.auto b/arch/microblaze/platform/generic/Kconfig.auto deleted file mode 100644 index 25a6f019e94..00000000000 --- a/arch/microblaze/platform/generic/Kconfig.auto +++ /dev/null @@ -1,61 +0,0 @@ -# -# (C) Copyright 2007 Michal Simek -# -# Michal SIMEK <monstr@monstr.eu> -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# Definitions for MICROBLAZE0 -comment "Definitions for MICROBLAZE0" - -config KERNEL_BASE_ADDR - hex "Physical address where Linux Kernel is" - default "0x90000000" - help - BASE Address for kernel - -config XILINX_MICROBLAZE0_FAMILY - string "Targeted FPGA family" - default "virtex5" - -config XILINX_MICROBLAZE0_USE_MSR_INSTR - int "USE_MSR_INSTR range (0:1)" - default 0 - -config XILINX_MICROBLAZE0_USE_PCMP_INSTR - int "USE_PCMP_INSTR range (0:1)" - default 0 - -config XILINX_MICROBLAZE0_USE_BARREL - int "USE_BARREL range (0:1)" - default 0 - -config XILINX_MICROBLAZE0_USE_DIV - int "USE_DIV range (0:1)" - default 0 - -config XILINX_MICROBLAZE0_USE_HW_MUL - int "USE_HW_MUL values (0=NONE, 1=MUL32, 2=MUL64)" - default 0 - -config XILINX_MICROBLAZE0_USE_FPU - int "USE_FPU values (0=NONE, 1=BASIC, 2=EXTENDED)" - default 0 - -config XILINX_MICROBLAZE0_HW_VER - string "Core version number" - default 7.10.d diff --git a/arch/microblaze/platform/generic/Makefile b/arch/microblaze/platform/generic/Makefile deleted file mode 100644 index 9a8b1bd3fa6..00000000000 --- a/arch/microblaze/platform/generic/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -# -# Empty Makefile to keep make clean happy -# diff --git a/arch/microblaze/platform/generic/system.dts b/arch/microblaze/platform/generic/system.dts deleted file mode 100644 index 3f85df2b73b..00000000000 --- a/arch/microblaze/platform/generic/system.dts +++ /dev/null @@ -1,367 +0,0 @@ -/* - * Device Tree Generator version: 1.1 - * - * (C) Copyright 2007-2008 Xilinx, Inc. - * (C) Copyright 2007-2009 Michal Simek - * - * Michal SIMEK <monstr@monstr.eu> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * CAUTION: This file is automatically generated by libgen. - * Version: Xilinx EDK 10.1.03 EDK_K_SP3.6 - * - * XPS project directory: Xilinx-ML505-ll_temac-sgdma-MMU-FDT-edk101 - */ - -/dts-v1/; -/ { - #address-cells = <1>; - #size-cells = <1>; - compatible = "xlnx,microblaze"; - hard-reset-gpios = <&LEDs_8Bit 2 1>; - model = "testing"; - DDR2_SDRAM: memory@90000000 { - device_type = "memory"; - reg = < 0x90000000 0x10000000 >; - } ; - aliases { - ethernet0 = &Hard_Ethernet_MAC; - serial0 = &RS232_Uart_1; - } ; - chosen { - bootargs = "console=ttyUL0,115200 highres=on"; - linux,stdout-path = "/plb@0/serial@84000000"; - } ; - cpus { - #address-cells = <1>; - #cpus = <0x1>; - #size-cells = <0>; - microblaze_0: cpu@0 { - clock-frequency = <125000000>; - compatible = "xlnx,microblaze-7.10.d"; - d-cache-baseaddr = <0x90000000>; - d-cache-highaddr = <0x9fffffff>; - d-cache-line-size = <0x10>; - d-cache-size = <0x2000>; - device_type = "cpu"; - i-cache-baseaddr = <0x90000000>; - i-cache-highaddr = <0x9fffffff>; - i-cache-line-size = <0x10>; - i-cache-size = <0x2000>; - model = "microblaze,7.10.d"; - reg = <0>; - timebase-frequency = <125000000>; - xlnx,addr-tag-bits = <0xf>; - xlnx,allow-dcache-wr = <0x1>; - xlnx,allow-icache-wr = <0x1>; - xlnx,area-optimized = <0x0>; - xlnx,cache-byte-size = <0x2000>; - xlnx,d-lmb = <0x1>; - xlnx,d-opb = <0x0>; - xlnx,d-plb = <0x1>; - xlnx,data-size = <0x20>; - xlnx,dcache-addr-tag = <0xf>; - xlnx,dcache-always-used = <0x1>; - xlnx,dcache-byte-size = <0x2000>; - xlnx,dcache-line-len = <0x4>; - xlnx,dcache-use-fsl = <0x1>; - xlnx,debug-enabled = <0x1>; - xlnx,div-zero-exception = <0x1>; - xlnx,dopb-bus-exception = <0x0>; - xlnx,dynamic-bus-sizing = <0x1>; - xlnx,edge-is-positive = <0x1>; - xlnx,family = "virtex5"; - xlnx,endianness = <0x1>; - xlnx,fpu-exception = <0x1>; - xlnx,fsl-data-size = <0x20>; - xlnx,fsl-exception = <0x0>; - xlnx,fsl-links = <0x0>; - xlnx,i-lmb = <0x1>; - xlnx,i-opb = <0x0>; - xlnx,i-plb = <0x1>; - xlnx,icache-always-used = <0x1>; - xlnx,icache-line-len = <0x4>; - xlnx,icache-use-fsl = <0x1>; - xlnx,ill-opcode-exception = <0x1>; - xlnx,instance = "microblaze_0"; - xlnx,interconnect = <0x1>; - xlnx,interrupt-is-edge = <0x0>; - xlnx,iopb-bus-exception = <0x0>; - xlnx,mmu-dtlb-size = <0x4>; - xlnx,mmu-itlb-size = <0x2>; - xlnx,mmu-tlb-access = <0x3>; - xlnx,mmu-zones = <0x10>; - xlnx,number-of-pc-brk = <0x1>; - xlnx,number-of-rd-addr-brk = <0x0>; - xlnx,number-of-wr-addr-brk = <0x0>; - xlnx,opcode-0x0-illegal = <0x1>; - xlnx,pvr = <0x2>; - xlnx,pvr-user1 = <0x0>; - xlnx,pvr-user2 = <0x0>; - xlnx,reset-msr = <0x0>; - xlnx,sco = <0x0>; - xlnx,unaligned-exceptions = <0x1>; - xlnx,use-barrel = <0x1>; - xlnx,use-dcache = <0x1>; - xlnx,use-div = <0x1>; - xlnx,use-ext-brk = <0x1>; - xlnx,use-ext-nm-brk = <0x1>; - xlnx,use-extended-fsl-instr = <0x0>; - xlnx,use-fpu = <0x2>; - xlnx,use-hw-mul = <0x2>; - xlnx,use-icache = <0x1>; - xlnx,use-interrupt = <0x1>; - xlnx,use-mmu = <0x3>; - xlnx,use-msr-instr = <0x1>; - xlnx,use-pcmp-instr = <0x1>; - } ; - } ; - mb_plb: plb@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "xlnx,plb-v46-1.03.a", "xlnx,plb-v46-1.00.a", "simple-bus"; - ranges ; - FLASH: flash@a0000000 { - bank-width = <2>; - compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash"; - reg = < 0xa0000000 0x2000000 >; - xlnx,family = "virtex5"; - xlnx,include-datawidth-matching-0 = <0x1>; - xlnx,include-datawidth-matching-1 = <0x0>; - xlnx,include-datawidth-matching-2 = <0x0>; - xlnx,include-datawidth-matching-3 = <0x0>; - xlnx,include-negedge-ioregs = <0x0>; - xlnx,include-plb-ipif = <0x1>; - xlnx,include-wrbuf = <0x1>; - xlnx,max-mem-width = <0x10>; - xlnx,mch-native-dwidth = <0x20>; - xlnx,mch-plb-clk-period-ps = <0x1f40>; - xlnx,mch-splb-awidth = <0x20>; - xlnx,mch0-accessbuf-depth = <0x10>; - xlnx,mch0-protocol = <0x0>; - xlnx,mch0-rddatabuf-depth = <0x10>; - xlnx,mch1-accessbuf-depth = <0x10>; - xlnx,mch1-protocol = <0x0>; - xlnx,mch1-rddatabuf-depth = <0x10>; - xlnx,mch2-accessbuf-depth = <0x10>; - xlnx,mch2-protocol = <0x0>; - xlnx,mch2-rddatabuf-depth = <0x10>; - xlnx,mch3-accessbuf-depth = <0x10>; - xlnx,mch3-protocol = <0x0>; - xlnx,mch3-rddatabuf-depth = <0x10>; - xlnx,mem0-width = <0x10>; - xlnx,mem1-width = <0x20>; - xlnx,mem2-width = <0x20>; - xlnx,mem3-width = <0x20>; - xlnx,num-banks-mem = <0x1>; - xlnx,num-channels = <0x0>; - xlnx,priority-mode = <0x0>; - xlnx,synch-mem-0 = <0x0>; - xlnx,synch-mem-1 = <0x0>; - xlnx,synch-mem-2 = <0x0>; - xlnx,synch-mem-3 = <0x0>; - xlnx,synch-pipedelay-0 = <0x2>; - xlnx,synch-pipedelay-1 = <0x2>; - xlnx,synch-pipedelay-2 = <0x2>; - xlnx,synch-pipedelay-3 = <0x2>; - xlnx,tavdv-ps-mem-0 = <0x1adb0>; - xlnx,tavdv-ps-mem-1 = <0x3a98>; - xlnx,tavdv-ps-mem-2 = <0x3a98>; - xlnx,tavdv-ps-mem-3 = <0x3a98>; - xlnx,tcedv-ps-mem-0 = <0x1adb0>; - xlnx,tcedv-ps-mem-1 = <0x3a98>; - xlnx,tcedv-ps-mem-2 = <0x3a98>; - xlnx,tcedv-ps-mem-3 = <0x3a98>; - xlnx,thzce-ps-mem-0 = <0x88b8>; - xlnx,thzce-ps-mem-1 = <0x1b58>; - xlnx,thzce-ps-mem-2 = <0x1b58>; - xlnx,thzce-ps-mem-3 = <0x1b58>; - xlnx,thzoe-ps-mem-0 = <0x1b58>; - xlnx,thzoe-ps-mem-1 = <0x1b58>; - xlnx,thzoe-ps-mem-2 = <0x1b58>; - xlnx,thzoe-ps-mem-3 = <0x1b58>; - xlnx,tlzwe-ps-mem-0 = <0x88b8>; - xlnx,tlzwe-ps-mem-1 = <0x0>; - xlnx,tlzwe-ps-mem-2 = <0x0>; - xlnx,tlzwe-ps-mem-3 = <0x0>; - xlnx,twc-ps-mem-0 = <0x2af8>; - xlnx,twc-ps-mem-1 = <0x3a98>; - xlnx,twc-ps-mem-2 = <0x3a98>; - xlnx,twc-ps-mem-3 = <0x3a98>; - xlnx,twp-ps-mem-0 = <0x11170>; - xlnx,twp-ps-mem-1 = <0x2ee0>; - xlnx,twp-ps-mem-2 = <0x2ee0>; - xlnx,twp-ps-mem-3 = <0x2ee0>; - xlnx,xcl0-linesize = <0x4>; - xlnx,xcl0-writexfer = <0x1>; - xlnx,xcl1-linesize = <0x4>; - xlnx,xcl1-writexfer = <0x1>; - xlnx,xcl2-linesize = <0x4>; - xlnx,xcl2-writexfer = <0x1>; - xlnx,xcl3-linesize = <0x4>; - xlnx,xcl3-writexfer = <0x1>; - } ; - Hard_Ethernet_MAC: xps-ll-temac@81c00000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "xlnx,compound"; - ranges ; - ethernet@81c00000 { - compatible = "xlnx,xps-ll-temac-1.01.b", "xlnx,xps-ll-temac-1.00.a"; - device_type = "network"; - interrupt-parent = <&xps_intc_0>; - interrupts = < 5 2 >; - llink-connected = <&PIM3>; - local-mac-address = [ 00 0a 35 00 00 00 ]; - reg = < 0x81c00000 0x40 >; - xlnx,bus2core-clk-ratio = <0x1>; - xlnx,phy-type = <0x1>; - xlnx,phyaddr = <0x1>; - xlnx,rxcsum = <0x0>; - xlnx,rxfifo = <0x1000>; - xlnx,temac-type = <0x0>; - xlnx,txcsum = <0x0>; - xlnx,txfifo = <0x1000>; - } ; - } ; - IIC_EEPROM: i2c@81600000 { - compatible = "xlnx,xps-iic-2.00.a"; - interrupt-parent = <&xps_intc_0>; - interrupts = < 6 2 >; - reg = < 0x81600000 0x10000 >; - xlnx,clk-freq = <0x7735940>; - xlnx,family = "virtex5"; - xlnx,gpo-width = <0x1>; - xlnx,iic-freq = <0x186a0>; - xlnx,scl-inertial-delay = <0x0>; - xlnx,sda-inertial-delay = <0x0>; - xlnx,ten-bit-adr = <0x0>; - } ; - LEDs_8Bit: gpio@81400000 { - compatible = "xlnx,xps-gpio-1.00.a"; - interrupt-parent = <&xps_intc_0>; - interrupts = < 7 2 >; - reg = < 0x81400000 0x10000 >; - xlnx,all-inputs = <0x0>; - xlnx,all-inputs-2 = <0x0>; - xlnx,dout-default = <0x0>; - xlnx,dout-default-2 = <0x0>; - xlnx,family = "virtex5"; - xlnx,gpio-width = <0x8>; - xlnx,interrupt-present = <0x1>; - xlnx,is-bidir = <0x1>; - xlnx,is-bidir-2 = <0x1>; - xlnx,is-dual = <0x0>; - xlnx,tri-default = <0xffffffff>; - xlnx,tri-default-2 = <0xffffffff>; - #gpio-cells = <2>; - gpio-controller; - } ; - - gpio-leds { - compatible = "gpio-leds"; - - heartbeat { - label = "Heartbeat"; - gpios = <&LEDs_8Bit 4 1>; - linux,default-trigger = "heartbeat"; - }; - - yellow { - label = "Yellow"; - gpios = <&LEDs_8Bit 5 1>; - }; - - red { - label = "Red"; - gpios = <&LEDs_8Bit 6 1>; - }; - - green { - label = "Green"; - gpios = <&LEDs_8Bit 7 1>; - }; - } ; - RS232_Uart_1: serial@84000000 { - clock-frequency = <125000000>; - compatible = "xlnx,xps-uartlite-1.00.a"; - current-speed = <115200>; - device_type = "serial"; - interrupt-parent = <&xps_intc_0>; - interrupts = < 8 0 >; - port-number = <0>; - reg = < 0x84000000 0x10000 >; - xlnx,baudrate = <0x1c200>; - xlnx,data-bits = <0x8>; - xlnx,family = "virtex5"; - xlnx,odd-parity = <0x0>; - xlnx,use-parity = <0x0>; - } ; - SysACE_CompactFlash: sysace@83600000 { - compatible = "xlnx,xps-sysace-1.00.a"; - interrupt-parent = <&xps_intc_0>; - interrupts = < 4 2 >; - reg = < 0x83600000 0x10000 >; - xlnx,family = "virtex5"; - xlnx,mem-width = <0x10>; - } ; - debug_module: debug@84400000 { - compatible = "xlnx,mdm-1.00.d"; - reg = < 0x84400000 0x10000 >; - xlnx,family = "virtex5"; - xlnx,interconnect = <0x1>; - xlnx,jtag-chain = <0x2>; - xlnx,mb-dbg-ports = <0x1>; - xlnx,uart-width = <0x8>; - xlnx,use-uart = <0x1>; - xlnx,write-fsl-ports = <0x0>; - } ; - mpmc@90000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "xlnx,mpmc-4.02.a"; - ranges ; - PIM3: sdma@84600180 { - compatible = "xlnx,ll-dma-1.00.a"; - interrupt-parent = <&xps_intc_0>; - interrupts = < 2 2 1 2 >; - reg = < 0x84600180 0x80 >; - } ; - } ; - xps_intc_0: interrupt-controller@81800000 { - #interrupt-cells = <0x2>; - compatible = "xlnx,xps-intc-1.00.a"; - interrupt-controller ; - reg = < 0x81800000 0x10000 >; - xlnx,kind-of-intr = <0x100>; - xlnx,num-intr-inputs = <0x9>; - } ; - xps_timer_1: timer@83c00000 { - compatible = "xlnx,xps-timer-1.00.a"; - interrupt-parent = <&xps_intc_0>; - interrupts = < 3 2 >; - reg = < 0x83c00000 0x10000 >; - xlnx,count-width = <0x20>; - xlnx,family = "virtex5"; - xlnx,gen0-assert = <0x1>; - xlnx,gen1-assert = <0x1>; - xlnx,one-timer-only = <0x0>; - xlnx,trig0-assert = <0x1>; - xlnx,trig1-assert = <0x1>; - } ; - } ; -} ; |