diff options
Diffstat (limited to 'arch/microblaze/kernel')
39 files changed, 1005 insertions, 1231 deletions
diff --git a/arch/microblaze/kernel/.gitignore b/arch/microblaze/kernel/.gitignore new file mode 100644 index 00000000000..c5f676c3c22 --- /dev/null +++ b/arch/microblaze/kernel/.gitignore @@ -0,0 +1 @@ +vmlinux.lds diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile index 494b63b72dd..08d50cc55e7 100644 --- a/arch/microblaze/kernel/Makefile +++ b/arch/microblaze/kernel/Makefile @@ -7,7 +7,6 @@ ifdef CONFIG_FUNCTION_TRACER CFLAGS_REMOVE_timer.o = -pg CFLAGS_REMOVE_intc.o = -pg CFLAGS_REMOVE_early_printk.o = -pg -CFLAGS_REMOVE_selfmod.o = -pg CFLAGS_REMOVE_heartbeat.o = -pg CFLAGS_REMOVE_ftrace.o = -pg CFLAGS_REMOVE_process.o = -pg @@ -16,14 +15,13 @@ endif extra-y := head.o vmlinux.lds obj-y += dma.o exceptions.o \ - hw_exception_handler.o init_task.o intc.o irq.o \ - process.o prom.o prom_parse.o ptrace.o \ + hw_exception_handler.o intc.o irq.o \ + platform.o process.o prom.o prom_parse.o ptrace.o \ reset.o setup.o signal.o sys_microblaze.o timer.o traps.o unwind.o obj-y += cpu/ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -obj-$(CONFIG_SELFMOD) += selfmod.o obj-$(CONFIG_HEART_BEAT) += heartbeat.o obj-$(CONFIG_MODULES) += microblaze_ksyms.o module.o obj-$(CONFIG_MMU) += misc.o diff --git a/arch/microblaze/kernel/cpu/cache.c b/arch/microblaze/kernel/cpu/cache.c index 4b7d8a3f4ae..a6e44410672 100644 --- a/arch/microblaze/kernel/cpu/cache.c +++ b/arch/microblaze/kernel/cpu/cache.c @@ -17,82 +17,70 @@ static inline void __enable_icache_msr(void) { - __asm__ __volatile__ (" msrset r0, %0; \ - nop; " \ + __asm__ __volatile__ (" msrset r0, %0;" \ + "nop;" \ : : "i" (MSR_ICE) : "memory"); } static inline void __disable_icache_msr(void) { - __asm__ __volatile__ (" msrclr r0, %0; \ - nop; " \ + __asm__ __volatile__ (" msrclr r0, %0;" \ + "nop;" \ : : "i" (MSR_ICE) : "memory"); } static inline void __enable_dcache_msr(void) { - __asm__ __volatile__ (" msrset r0, %0; \ - nop; " \ - : \ - : "i" (MSR_DCE) \ - : "memory"); + __asm__ __volatile__ (" msrset r0, %0;" \ + "nop;" \ + : : "i" (MSR_DCE) : "memory"); } static inline void __disable_dcache_msr(void) { - __asm__ __volatile__ (" msrclr r0, %0; \ - nop; " \ - : \ - : "i" (MSR_DCE) \ - : "memory"); + __asm__ __volatile__ (" msrclr r0, %0;" \ + "nop; " \ + : : "i" (MSR_DCE) : "memory"); } static inline void __enable_icache_nomsr(void) { - __asm__ __volatile__ (" mfs r12, rmsr; \ - nop; \ - ori r12, r12, %0; \ - mts rmsr, r12; \ - nop; " \ - : \ - : "i" (MSR_ICE) \ - : "memory", "r12"); + __asm__ __volatile__ (" mfs r12, rmsr;" \ + "nop;" \ + "ori r12, r12, %0;" \ + "mts rmsr, r12;" \ + "nop;" \ + : : "i" (MSR_ICE) : "memory", "r12"); } static inline void __disable_icache_nomsr(void) { - __asm__ __volatile__ (" mfs r12, rmsr; \ - nop; \ - andi r12, r12, ~%0; \ - mts rmsr, r12; \ - nop; " \ - : \ - : "i" (MSR_ICE) \ - : "memory", "r12"); + __asm__ __volatile__ (" mfs r12, rmsr;" \ + "nop;" \ + "andi r12, r12, ~%0;" \ + "mts rmsr, r12;" \ + "nop;" \ + : : "i" (MSR_ICE) : "memory", "r12"); } static inline void __enable_dcache_nomsr(void) { - __asm__ __volatile__ (" mfs r12, rmsr; \ - nop; \ - ori r12, r12, %0; \ - mts rmsr, r12; \ - nop; " \ - : \ - : "i" (MSR_DCE) \ - : "memory", "r12"); + __asm__ __volatile__ (" mfs r12, rmsr;" \ + "nop;" \ + "ori r12, r12, %0;" \ + "mts rmsr, r12;" \ + "nop;" \ + : : "i" (MSR_DCE) : "memory", "r12"); } static inline void __disable_dcache_nomsr(void) { - __asm__ __volatile__ (" mfs r12, rmsr; \ - nop; \ - andi r12, r12, ~%0; \ - mts rmsr, r12; \ - nop; " \ - : \ - : "i" (MSR_DCE) \ - : "memory", "r12"); + __asm__ __volatile__ (" mfs r12, rmsr;" \ + "nop;" \ + "andi r12, r12, ~%0;" \ + "mts rmsr, r12;" \ + "nop;" \ + : : "i" (MSR_DCE) : "memory", "r12"); } @@ -106,7 +94,7 @@ do { \ int align = ~(cache_line_length - 1); \ end = min(start + cache_size, end); \ start &= align; \ -} while (0); +} while (0) /* * Helper macro to loop over the specified cache_size/line_length and @@ -118,12 +106,12 @@ do { \ int step = -line_length; \ WARN_ON(step >= 0); \ \ - __asm__ __volatile__ (" 1: " #op " %0, r0; \ - bgtid %0, 1b; \ - addk %0, %0, %1; \ - " : : "r" (len), "r" (step) \ + __asm__ __volatile__ (" 1: " #op " %0, r0;" \ + "bgtid %0, 1b;" \ + "addk %0, %0, %1;" \ + : : "r" (len), "r" (step) \ : "memory"); \ -} while (0); +} while (0) /* Used for wdc.flush/clear which can use rB for offset which is not possible * to use for simple wdc or wic. @@ -142,28 +130,28 @@ do { \ count = end - start; \ WARN_ON(count < 0); \ \ - __asm__ __volatile__ (" 1: " #op " %0, %1; \ - bgtid %1, 1b; \ - addk %1, %1, %2; \ - " : : "r" (start), "r" (count), \ + __asm__ __volatile__ (" 1: " #op " %0, %1;" \ + "bgtid %1, 1b;" \ + "addk %1, %1, %2;" \ + : : "r" (start), "r" (count), \ "r" (step) : "memory"); \ -} while (0); +} while (0) /* It is used only first parameter for OP - for wic, wdc */ #define CACHE_RANGE_LOOP_1(start, end, line_length, op) \ do { \ - int volatile temp; \ + int volatile temp = 0; \ int align = ~(line_length - 1); \ end = ((end & align) == end) ? end - line_length : end & align; \ WARN_ON(end - start < 0); \ \ - __asm__ __volatile__ (" 1: " #op " %1, r0; \ - cmpu %0, %1, %2; \ - bgtid %0, 1b; \ - addk %1, %1, %3; \ - " : : "r" (temp), "r" (start), "r" (end),\ + __asm__ __volatile__ (" 1: " #op " %1, r0;" \ + "cmpu %0, %1, %2;" \ + "bgtid %0, 1b;" \ + "addk %1, %1, %3;" \ + : : "r" (temp), "r" (start), "r" (end), \ "r" (line_length) : "memory"); \ -} while (0); +} while (0) #define ASM_LOOP @@ -352,7 +340,7 @@ static void __invalidate_dcache_all_noirq_wt(void) #endif pr_debug("%s\n", __func__); #ifdef ASM_LOOP - CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length, wdc) + CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length, wdc); #else for (i = 0; i < cpuinfo.dcache_size; i += cpuinfo.dcache_line_length) @@ -361,7 +349,8 @@ static void __invalidate_dcache_all_noirq_wt(void) #endif } -/* FIXME It is blindly invalidation as is expected +/* + * FIXME It is blindly invalidation as is expected * but can't be called on noMMU in microblaze_cache_init below * * MS: noMMU kernel won't boot if simple wdc is used @@ -375,7 +364,7 @@ static void __invalidate_dcache_all_wb(void) pr_debug("%s\n", __func__); #ifdef ASM_LOOP CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length, - wdc) + wdc); #else for (i = 0; i < cpuinfo.dcache_size; i += cpuinfo.dcache_line_length) @@ -616,49 +605,48 @@ static const struct scache wt_nomsr_noirq = { #define CPUVER_7_20_A 0x0c #define CPUVER_7_20_D 0x0f -#define INFO(s) printk(KERN_INFO "cache: " s "\n"); - void microblaze_cache_init(void) { if (cpuinfo.use_instr & PVR2_USE_MSR_INSTR) { if (cpuinfo.dcache_wb) { - INFO("wb_msr"); + pr_info("wb_msr\n"); mbc = (struct scache *)&wb_msr; if (cpuinfo.ver_code <= CPUVER_7_20_D) { /* MS: problem with signal handling - hw bug */ - INFO("WB won't work properly"); + pr_info("WB won't work properly\n"); } } else { if (cpuinfo.ver_code >= CPUVER_7_20_A) { - INFO("wt_msr_noirq"); + pr_info("wt_msr_noirq\n"); mbc = (struct scache *)&wt_msr_noirq; } else { - INFO("wt_msr"); + pr_info("wt_msr\n"); mbc = (struct scache *)&wt_msr; } } } else { if (cpuinfo.dcache_wb) { - INFO("wb_nomsr"); + pr_info("wb_nomsr\n"); mbc = (struct scache *)&wb_nomsr; if (cpuinfo.ver_code <= CPUVER_7_20_D) { /* MS: problem with signal handling - hw bug */ - INFO("WB won't work properly"); + pr_info("WB won't work properly\n"); } } else { if (cpuinfo.ver_code >= CPUVER_7_20_A) { - INFO("wt_nomsr_noirq"); + pr_info("wt_nomsr_noirq\n"); mbc = (struct scache *)&wt_nomsr_noirq; } else { - INFO("wt_nomsr"); + pr_info("wt_nomsr\n"); mbc = (struct scache *)&wt_nomsr; } } } -/* FIXME Invalidation is done in U-BOOT - * WT cache: Data is already written to main memory - * WB cache: Discard data on noMMU which caused that kernel doesn't boot - */ + /* + * FIXME Invalidation is done in U-BOOT + * WT cache: Data is already written to main memory + * WB cache: Discard data on noMMU which caused that kernel doesn't boot + */ /* invalidate_dcache(); */ enable_dcache(); diff --git a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c index 916aaedf194..93c26cf50de 100644 --- a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c +++ b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c @@ -27,7 +27,7 @@ early_printk("ERROR: Microblaze " x "-different for PVR and DTS\n"); #else #define err_printk(x) \ - printk(KERN_INFO "ERROR: Microblaze " x "-different for PVR and DTS\n"); + pr_info("ERROR: Microblaze " x "-different for PVR and DTS\n"); #endif void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu) @@ -38,12 +38,11 @@ void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu) CI(ver_code, VERSION); if (!ci->ver_code) { - printk(KERN_ERR "ERROR: MB has broken PVR regs " - "-> use DTS setting\n"); + pr_err("ERROR: MB has broken PVR regs -> use DTS setting\n"); return; } - temp = PVR_USE_BARREL(pvr) | PVR_USE_MSR_INSTR(pvr) |\ + temp = PVR_USE_BARREL(pvr) | PVR_USE_MSR_INSTR(pvr) | PVR_USE_PCMP_INSTR(pvr) | PVR_USE_DIV(pvr); if (ci->use_instr != temp) err_printk("BARREL, MSR, PCMP or DIV"); @@ -59,13 +58,13 @@ void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu) err_printk("HW_FPU"); ci->use_fpu = temp; - ci->use_exc = PVR_OPCODE_0x0_ILLEGAL(pvr) |\ - PVR_UNALIGNED_EXCEPTION(pvr) |\ - PVR_ILL_OPCODE_EXCEPTION(pvr) |\ - PVR_IOPB_BUS_EXCEPTION(pvr) |\ - PVR_DOPB_BUS_EXCEPTION(pvr) |\ - PVR_DIV_ZERO_EXCEPTION(pvr) |\ - PVR_FPU_EXCEPTION(pvr) |\ + ci->use_exc = PVR_OPCODE_0x0_ILLEGAL(pvr) | + PVR_UNALIGNED_EXCEPTION(pvr) | + PVR_ILL_OPCODE_EXCEPTION(pvr) | + PVR_IOPB_BUS_EXCEPTION(pvr) | + PVR_DOPB_BUS_EXCEPTION(pvr) | + PVR_DIV_ZERO_EXCEPTION(pvr) | + PVR_FPU_EXCEPTION(pvr) | PVR_FSL_EXCEPTION(pvr); CI(pvr_user1, USER1); @@ -113,7 +112,4 @@ void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu) CI(num_wr_brk, NUMBER_OF_WR_ADDR_BRK); CI(fpga_family_code, TARGET_FAMILY); - - /* take timebase-frequency from DTS */ - ci->cpu_clock_freq = fcpu(cpu, "timebase-frequency"); } diff --git a/arch/microblaze/kernel/cpu/cpuinfo-static.c b/arch/microblaze/kernel/cpu/cpuinfo-static.c index 592bb2e838c..4854285b26e 100644 --- a/arch/microblaze/kernel/cpu/cpuinfo-static.c +++ b/arch/microblaze/kernel/cpu/cpuinfo-static.c @@ -113,8 +113,6 @@ void __init set_cpuinfo_static(struct cpuinfo *ci, struct device_node *cpu) ci->num_rd_brk = fcpu(cpu, "xlnx,number-of-rd-addr-brk"); ci->num_wr_brk = fcpu(cpu, "xlnx,number-of-wr-addr-brk"); - ci->cpu_clock_freq = fcpu(cpu, "timebase-frequency"); - ci->pvr_user1 = fcpu(cpu, "xlnx,pvr-user1"); ci->pvr_user2 = fcpu(cpu, "xlnx,pvr-user2"); diff --git a/arch/microblaze/kernel/cpu/cpuinfo.c b/arch/microblaze/kernel/cpu/cpuinfo.c index 54194b28574..234acad79b9 100644 --- a/arch/microblaze/kernel/cpu/cpuinfo.c +++ b/arch/microblaze/kernel/cpu/cpuinfo.c @@ -8,6 +8,7 @@ * for more details. */ +#include <linux/clk.h> #include <linux/init.h> #include <asm/cpuinfo.h> #include <asm/pvr.h> @@ -35,6 +36,13 @@ const struct cpu_ver_key cpu_ver_lookup[] = { {"8.00.b", 0x13}, {"8.10.a", 0x14}, {"8.20.a", 0x15}, + {"8.20.b", 0x16}, + {"8.30.a", 0x17}, + {"8.40.a", 0x18}, + {"8.40.b", 0x19}, + {"8.50.a", 0x1a}, + {"9.0", 0x1b}, + {"9.1", 0x1d}, {NULL, 0}, }; @@ -55,42 +63,62 @@ const struct family_string_key family_string_lookup[] = { {"virtex6", 0xe}, /* FIXME There is no key code defined for spartan2 */ {"spartan2", 0xf0}, + {"kintex7", 0x10}, + {"artix7", 0x11}, + {"zynq7000", 0x12}, {NULL, 0}, }; struct cpuinfo cpuinfo; +static struct device_node *cpu; void __init setup_cpuinfo(void) { - struct device_node *cpu = NULL; - cpu = (struct device_node *) of_find_node_by_type(NULL, "cpu"); if (!cpu) - printk(KERN_ERR "You don't have cpu!!!\n"); + pr_err("You don't have cpu!!!\n"); - printk(KERN_INFO "%s: initialising\n", __func__); + pr_info("%s: initialising\n", __func__); switch (cpu_has_pvr()) { case 0: - printk(KERN_WARNING - "%s: No PVR support. Using static CPU info from FDT\n", + pr_warn("%s: No PVR support. Using static CPU info from FDT\n", __func__); set_cpuinfo_static(&cpuinfo, cpu); break; /* FIXME I found weird behavior with MB 7.00.a/b 7.10.a * please do not use FULL PVR with MMU */ case 1: - printk(KERN_INFO "%s: Using full CPU PVR support\n", + pr_info("%s: Using full CPU PVR support\n", __func__); set_cpuinfo_static(&cpuinfo, cpu); set_cpuinfo_pvr_full(&cpuinfo, cpu); break; default: - printk(KERN_WARNING "%s: Unsupported PVR setting\n", __func__); + pr_warn("%s: Unsupported PVR setting\n", __func__); set_cpuinfo_static(&cpuinfo, cpu); } if (cpuinfo.mmu_privins) - printk(KERN_WARNING "%s: Stream instructions enabled" + pr_warn("%s: Stream instructions enabled" " - USERSPACE CAN LOCK THIS KERNEL!\n", __func__); } + +void __init setup_cpuinfo_clk(void) +{ + struct clk *clk; + + clk = of_clk_get(cpu, 0); + if (IS_ERR(clk)) { + pr_err("ERROR: CPU CCF input clock not found\n"); + /* take timebase-frequency from DTS */ + cpuinfo.cpu_clock_freq = fcpu(cpu, "timebase-frequency"); + } else { + cpuinfo.cpu_clock_freq = clk_get_rate(clk); + } + + if (!cpuinfo.cpu_clock_freq) { + pr_err("ERROR: CPU clock frequency not setup\n"); + BUG(); + } +} diff --git a/arch/microblaze/kernel/cpu/pvr.c b/arch/microblaze/kernel/cpu/pvr.c index 488c1ed24e3..8d0dc6db48c 100644 --- a/arch/microblaze/kernel/cpu/pvr.c +++ b/arch/microblaze/kernel/cpu/pvr.c @@ -12,7 +12,6 @@ #include <linux/kernel.h> #include <linux/compiler.h> -#include <asm/system.h> #include <asm/exceptions.h> #include <asm/pvr.h> @@ -28,7 +27,7 @@ tmp = 0x0; /* Prevent warning about unused */ \ __asm__ __volatile__ ( \ "mfs %0, rpvr" #pvrid ";" \ - : "=r" (tmp) : : "memory"); \ + : "=r" (tmp) : : "memory"); \ val = tmp; \ } diff --git a/arch/microblaze/kernel/dma.c b/arch/microblaze/kernel/dma.c index 65a4af4cbbb..4633c36c1b3 100644 --- a/arch/microblaze/kernel/dma.c +++ b/arch/microblaze/kernel/dma.c @@ -11,29 +11,13 @@ #include <linux/gfp.h> #include <linux/dma-debug.h> #include <linux/export.h> -#include <asm/bug.h> - -/* - * Generic direct DMA implementation - * - * This implementation supports a per-device offset that can be applied if - * the address at which memory is visible to devices is not 0. Platform code - * can set archdata.dma_data to an unsigned long holding the offset. By - * default the offset is PCI_DRAM_OFFSET. - */ - -static unsigned long get_dma_direct_offset(struct device *dev) -{ - if (likely(dev)) - return (unsigned long)dev->archdata.dma_data; - - return PCI_DRAM_OFFSET; /* FIXME Not sure if is correct */ -} +#include <linux/bug.h> #define NOT_COHERENT_CACHE static void *dma_direct_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag) + dma_addr_t *dma_handle, gfp_t flag, + struct dma_attrs *attrs) { #ifdef NOT_COHERENT_CACHE return consistent_alloc(flag, size, dma_handle); @@ -50,14 +34,15 @@ static void *dma_direct_alloc_coherent(struct device *dev, size_t size, return NULL; ret = page_address(page); memset(ret, 0, size); - *dma_handle = virt_to_phys(ret) + get_dma_direct_offset(dev); + *dma_handle = virt_to_phys(ret); return ret; #endif } static void dma_direct_free_coherent(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle) + void *vaddr, dma_addr_t dma_handle, + struct dma_attrs *attrs) { #ifdef NOT_COHERENT_CACHE consistent_free(size, vaddr); @@ -75,7 +60,7 @@ static int dma_direct_map_sg(struct device *dev, struct scatterlist *sgl, /* FIXME this part of code is untested */ for_each_sg(sgl, sg, nents, i) { - sg->dma_address = sg_phys(sg) + get_dma_direct_offset(dev); + sg->dma_address = sg_phys(sg); __dma_sync(page_to_phys(sg_page(sg)) + sg->offset, sg->length, direction); } @@ -83,12 +68,6 @@ static int dma_direct_map_sg(struct device *dev, struct scatterlist *sgl, return nents; } -static void dma_direct_unmap_sg(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction direction, - struct dma_attrs *attrs) -{ -} - static int dma_direct_dma_supported(struct device *dev, u64 mask) { return 1; @@ -102,7 +81,7 @@ static inline dma_addr_t dma_direct_map_page(struct device *dev, struct dma_attrs *attrs) { __dma_sync(page_to_phys(page) + offset, size, direction); - return page_to_phys(page) + offset + get_dma_direct_offset(dev); + return page_to_phys(page) + offset; } static inline void dma_direct_unmap_page(struct device *dev, @@ -176,10 +155,9 @@ dma_direct_sync_sg_for_device(struct device *dev, } struct dma_map_ops dma_direct_ops = { - .alloc_coherent = dma_direct_alloc_coherent, - .free_coherent = dma_direct_free_coherent, + .alloc = dma_direct_alloc_coherent, + .free = dma_direct_free_coherent, .map_sg = dma_direct_map_sg, - .unmap_sg = dma_direct_unmap_sg, .dma_supported = dma_direct_dma_supported, .map_page = dma_direct_map_page, .unmap_page = dma_direct_unmap_page, @@ -195,8 +173,8 @@ EXPORT_SYMBOL(dma_direct_ops); static int __init dma_init(void) { - dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES); + dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES); - return 0; + return 0; } fs_initcall(dma_init); diff --git a/arch/microblaze/kernel/early_printk.c b/arch/microblaze/kernel/early_printk.c index 8356e47631c..365f2d53f1b 100644 --- a/arch/microblaze/kernel/early_printk.c +++ b/arch/microblaze/kernel/early_printk.c @@ -21,7 +21,6 @@ #include <asm/setup.h> #include <asm/prom.h> -static u32 early_console_initialized; static u32 base_addr; #ifdef CONFIG_SERIAL_UARTLITE_CONSOLE @@ -109,27 +108,11 @@ static struct console early_serial_uart16550_console = { }; #endif /* CONFIG_SERIAL_8250_CONSOLE */ -static struct console *early_console; - -void early_printk(const char *fmt, ...) -{ - char buf[512]; - int n; - va_list ap; - - if (early_console_initialized) { - va_start(ap, fmt); - n = vscnprintf(buf, 512, fmt, ap); - early_console->write(early_console, buf, n); - va_end(ap); - } -} - int __init setup_early_printk(char *opt) { int version = 0; - if (early_console_initialized) + if (early_console) return 1; base_addr = of_early_console(&version); @@ -140,26 +123,25 @@ int __init setup_early_printk(char *opt) switch (version) { #ifdef CONFIG_SERIAL_UARTLITE_CONSOLE case UARTLITE: - printk(KERN_INFO "Early console on uartlite " - "at 0x%08x\n", base_addr); + pr_info("Early console on uartlite at 0x%08x\n", + base_addr); early_console = &early_serial_uartlite_console; break; #endif #ifdef CONFIG_SERIAL_8250_CONSOLE case UART16550: - printk(KERN_INFO "Early console on uart16650 " - "at 0x%08x\n", base_addr); + pr_info("Early console on uart16650 at 0x%08x\n", + base_addr); early_console = &early_serial_uart16550_console; break; #endif default: - printk(KERN_INFO "Unsupported early console %d\n", + pr_info("Unsupported early console %d\n", version); return 1; } register_console(early_console); - early_console_initialized = 1; return 0; } return 1; @@ -169,19 +151,34 @@ int __init setup_early_printk(char *opt) * only for early console because of performance degression */ void __init remap_early_printk(void) { - if (!early_console_initialized || !early_console) + if (!early_console) return; - printk(KERN_INFO "early_printk_console remaping from 0x%x to ", - base_addr); + pr_info("early_printk_console remapping from 0x%x to ", base_addr); base_addr = (u32) ioremap(base_addr, PAGE_SIZE); - printk(KERN_CONT "0x%x\n", base_addr); + pr_cont("0x%x\n", base_addr); + +#ifdef CONFIG_MMU + /* + * Early console is on the top of skipped TLB entries + * decrease tlb_skip size ensure that hardcoded TLB entry will be + * used by generic algorithm + * FIXME check if early console mapping is on the top by rereading + * TLB entry and compare baseaddr + * mts rtlbx, (tlb_skip - 1) + * nop + * mfs rX, rtlblo + * nop + * cmp rX, orig_base_addr + */ + tlb_skip -= 1; +#endif } void __init disable_early_printk(void) { - if (!early_console_initialized || !early_console) + if (!early_console) return; - printk(KERN_WARNING "disabling early console\n"); + pr_warn("disabling early console\n"); unregister_console(early_console); - early_console_initialized = 0; + early_console = NULL; } diff --git a/arch/microblaze/kernel/entry-nommu.S b/arch/microblaze/kernel/entry-nommu.S index 34b526f59b4..7e394fc2c43 100644 --- a/arch/microblaze/kernel/entry-nommu.S +++ b/arch/microblaze/kernel/entry-nommu.S @@ -124,6 +124,7 @@ ret_from_intr: lwi r11, r1, PT_MODE bneid r11, no_intr_resched +3: lwi r6, r31, TS_THREAD_INFO /* get thread info */ lwi r19, r6, TI_FLAGS /* get flags in thread info */ /* do an extra work if any bits are set */ @@ -132,12 +133,13 @@ ret_from_intr: beqi r11, 1f bralid r15, schedule nop -1: andi r11, r19, _TIF_SIGPENDING + bri 3b +1: andi r11, r19, _TIF_SIGPENDING | _TIF_NOTIFY_RESUME beqid r11, no_intr_resched addk r5, r1, r0 - addk r7, r0, r0 - bralid r15, do_signal + bralid r15, do_notify_resume addk r6, r0, r0 + bri 3b no_intr_resched: /* Disable interrupts, we are now committed to the state restore */ @@ -281,6 +283,7 @@ ENTRY(_user_exception) /* Figure out which function to use for this system call. */ /* Note Microblaze barrel shift is optional, so don't rely on it */ add r12, r12, r12 /* convert num -> ptr */ + addik r30, r0, 1 /* restarts allowed */ add r12, r12, r12 lwi r12, r12, sys_call_table /* Get function pointer */ addik r15, r0, ret_to_user-8 /* set return address */ @@ -292,8 +295,8 @@ ENTRY(_user_exception) /* * Debug traps are like a system call, but entered via brki r14, 0x60 - * All we need to do is send the SIGTRAP signal to current, ptrace and do_signal - * will handle the rest + * All we need to do is send the SIGTRAP signal to current, ptrace and + * do_notify_resume will handle the rest */ ENTRY(_debug_exception) swi r1, r0, PER_CPU(ENTRY_SP) /* save the current sp */ @@ -370,6 +373,7 @@ ENTRY(_debug_exception) bralid r15, send_sig add r7, r0, r0 /* 3rd param zero */ + addik r30, r0, 1 /* restarts allowed ??? */ /* Restore r3/r4 to work around how ret_to_user works */ lwi r3, r1, PT_R3 lwi r4, r1, PT_R4 @@ -466,7 +470,6 @@ ENTRY(_switch_to) ENTRY(ret_from_fork) addk r5, r0, r3 - addk r6, r0, r1 brlid r15, schedule_tail nop swi r31, r1, PT_R31 /* save r31 in user context. */ @@ -475,20 +478,35 @@ ENTRY(ret_from_fork) brid ret_to_user nop +ENTRY(ret_from_kernel_thread) + brlid r15, schedule_tail + addk r5, r0, r3 + brald r15, r20 + addk r5, r0, r19 + brid ret_to_user + addk r3, r0, r0 + work_pending: + lwi r11, r1, PT_MODE + bneid r11, 2f +3: enable_irq - andi r11, r19, _TIF_NEED_RESCHED beqi r11, 1f bralid r15, schedule nop -1: andi r11, r19, _TIF_SIGPENDING + bri 4f +1: andi r11, r19, _TIF_SIGPENDING | _TIF_NOTIFY_RESUME beqi r11, no_work_pending - addk r5, r1, r0 - addik r7, r0, 1 - bralid r15, do_signal - addk r6, r0, r0 - bri no_work_pending + addk r5, r30, r0 + bralid r15, do_notify_resume + addik r6, r0, 1 + addk r30, r0, r0 /* no restarts from now on */ +4: + disable_irq + lwi r6, r31, TS_THREAD_INFO /* get thread info */ + lwi r19, r6, TI_FLAGS /* get flags in thread info */ + bri 3b ENTRY(ret_to_user) disable_irq @@ -502,6 +520,7 @@ ENTRY(ret_to_user) no_work_pending: disable_irq +2: /* save r31 */ swi r31, r0, PER_CPU(CURRENT_SAVE) /* save mode indicator */ @@ -553,26 +572,11 @@ no_work_pending: rtid r14, 0 nop -sys_vfork: - brid microblaze_vfork - addk r5, r1, r0 - -sys_clone: - brid microblaze_clone - addk r7, r1, r0 - -sys_execve: - brid microblaze_execve - addk r8, r1, r0 - sys_rt_sigreturn_wrapper: + addk r30, r0, r0 /* no restarts for this one */ brid sys_rt_sigreturn addk r5, r1, r0 -sys_rt_sigsuspend_wrapper: - brid sys_rt_sigsuspend - addk r7, r1, r0 - /* Interrupt vector table */ .section .init.ivt, "ax" .org 0x0 diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S index 66e34a3bfe1..0536bc021cc 100644 --- a/arch/microblaze/kernel/entry.S +++ b/arch/microblaze/kernel/entry.S @@ -293,24 +293,6 @@ C_ENTRY(_user_exception): swi r1, r0, TOPHYS(PER_CPU(ENTRY_SP)) /* save stack */ addi r14, r14, 4 /* return address is 4 byte after call */ - mfs r1, rmsr - nop - andi r1, r1, MSR_UMS - bnei r1, 1f - -/* Kernel-mode state save - kernel execve */ - lwi r1, r0, TOPHYS(PER_CPU(ENTRY_SP)); /* Reload kernel stack-ptr*/ - tophys(r1,r1); - - addik r1, r1, -PT_SIZE; /* Make room on the stack. */ - SAVE_REGS - - swi r1, r1, PT_MODE; /* pt_regs -> kernel mode */ - brid 2f; - nop; /* Fill delay slot */ - -/* User-mode state save. */ -1: lwi r1, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */ tophys(r1,r1); lwi r1, r1, TS_THREAD_INFO; /* get stack from task_struct */ @@ -372,6 +354,7 @@ C_ENTRY(_user_exception): /* Note Microblaze barrel shift is optional, so don't rely on it */ add r12, r12, r12; /* convert num -> ptr */ add r12, r12, r12; + addi r30, r0, 1 /* restarts allowed */ #ifdef DEBUG /* Trac syscalls and stored them to syscall_debug_table */ @@ -419,27 +402,27 @@ C_ENTRY(ret_from_trap): * trigger rescheduling. */ /* get thread info from current task */ lwi r11, CURRENT_TASK, TS_THREAD_INFO; - lwi r11, r11, TI_FLAGS; /* get flags in thread info */ - andi r11, r11, _TIF_NEED_RESCHED; + lwi r19, r11, TI_FLAGS; /* get flags in thread info */ + andi r11, r19, _TIF_NEED_RESCHED; beqi r11, 5f; bralid r15, schedule; /* Call scheduler */ nop; /* delay slot */ + bri 1b /* Maybe handle a signal */ -5: /* get thread info from current task*/ - lwi r11, CURRENT_TASK, TS_THREAD_INFO; - lwi r11, r11, TI_FLAGS; /* get flags in thread info */ - andi r11, r11, _TIF_SIGPENDING; - beqi r11, 1f; /* Signals to handle, handle them */ +5: + andi r11, r19, _TIF_SIGPENDING | _TIF_NOTIFY_RESUME; + beqi r11, 4f; /* Signals to handle, handle them */ addik r5, r1, 0; /* Arg 1: struct pt_regs *regs */ - addi r7, r0, 1; /* Arg 3: int in_syscall */ - bralid r15, do_signal; /* Handle any signals */ - add r6, r0, r0; /* Arg 2: sigset_t *oldset */ + bralid r15, do_notify_resume; /* Handle any signals */ + add r6, r30, r0; /* Arg 2: int in_syscall */ + add r30, r0, r0 /* no more restarts */ + bri 1b /* Finally, return to user state. */ -1: set_bip; /* Ints masked for state restore */ +4: set_bip; /* Ints masked for state restore */ swi CURRENT_TASK, r0, PER_CPU(CURRENT_SAVE); /* save current */ VM_OFF; tophys(r1,r1); @@ -461,18 +444,6 @@ TRAP_return: /* Make global symbol for debugging */ nop; -/* These syscalls need access to the struct pt_regs on the stack, so we - implement them in assembly (they're basically all wrappers anyway). */ - -C_ENTRY(sys_fork_wrapper): - addi r5, r0, SIGCHLD /* Arg 0: flags */ - lwi r6, r1, PT_R1 /* Arg 1: child SP (use parent's) */ - addik r7, r1, 0 /* Arg 2: parent context */ - add r8, r0, r0 /* Arg 3: (unused) */ - add r9, r0, r0; /* Arg 4: (unused) */ - brid do_fork /* Do real work (tail-call) */ - add r10, r0, r0; /* Arg 5: (unused) */ - /* This the initial entry point for a new child thread, with an appropriate stack in place that makes it look the the child is in the middle of an syscall. This function is actually `returned to' from switch_thread @@ -480,29 +451,22 @@ C_ENTRY(sys_fork_wrapper): saved context). */ C_ENTRY(ret_from_fork): bralid r15, schedule_tail; /* ...which is schedule_tail's arg */ - add r3, r5, r0; /* switch_thread returns the prev task */ + add r5, r3, r0; /* switch_thread returns the prev task */ /* ( in the delay slot ) */ brid ret_from_trap; /* Do normal trap return */ add r3, r0, r0; /* Child's fork call should return 0. */ -C_ENTRY(sys_vfork): - brid microblaze_vfork /* Do real work (tail-call) */ - addik r5, r1, 0 - -C_ENTRY(sys_clone): - bnei r6, 1f; /* See if child SP arg (arg 1) is 0. */ - lwi r6, r1, PT_R1; /* If so, use paret's stack ptr */ -1: addik r7, r1, 0; /* Arg 2: parent context */ - add r8, r0, r0; /* Arg 3: (unused) */ - add r9, r0, r0; /* Arg 4: (unused) */ - brid do_fork /* Do real work (tail-call) */ - add r10, r0, r0; /* Arg 5: (unused) */ - -C_ENTRY(sys_execve): - brid microblaze_execve; /* Do real work (tail-call).*/ - addik r8, r1, 0; /* add user context as 4th arg */ +C_ENTRY(ret_from_kernel_thread): + bralid r15, schedule_tail; /* ...which is schedule_tail's arg */ + add r5, r3, r0; /* switch_thread returns the prev task */ + /* ( in the delay slot ) */ + brald r15, r20 /* fn was left in r20 */ + addk r5, r0, r19 /* ... and argument - in r19 */ + brid ret_from_trap + add r3, r0, r0 C_ENTRY(sys_rt_sigreturn_wrapper): + addik r30, r0, 0 /* no restarts */ brid sys_rt_sigreturn /* Do real work */ addik r5, r1, 0; /* add user context as 1st arg */ @@ -610,20 +574,20 @@ C_ENTRY(ret_from_exc): /* We're returning to user mode, so check for various conditions that trigger rescheduling. */ +1: lwi r11, CURRENT_TASK, TS_THREAD_INFO; /* get thread info */ - lwi r11, r11, TI_FLAGS; /* get flags in thread info */ - andi r11, r11, _TIF_NEED_RESCHED; + lwi r19, r11, TI_FLAGS; /* get flags in thread info */ + andi r11, r19, _TIF_NEED_RESCHED; beqi r11, 5f; /* Call the scheduler before returning from a syscall/trap. */ bralid r15, schedule; /* Call scheduler */ nop; /* delay slot */ + bri 1b /* Maybe handle a signal */ -5: lwi r11, CURRENT_TASK, TS_THREAD_INFO; /* get thread info */ - lwi r11, r11, TI_FLAGS; /* get flags in thread info */ - andi r11, r11, _TIF_SIGPENDING; - beqi r11, 1f; /* Signals to handle, handle them */ +5: andi r11, r19, _TIF_SIGPENDING | _TIF_NOTIFY_RESUME; + beqi r11, 4f; /* Signals to handle, handle them */ /* * Handle a signal return; Pending signals should be in r18. @@ -635,14 +599,14 @@ C_ENTRY(ret_from_exc): * traps), but signal handlers may want to examine or change the * complete register state. Here we save anything not saved by * the normal entry sequence, so that it may be safely restored - * (in a possibly modified form) after do_signal returns. */ + * (in a possibly modified form) after do_notify_resume returns. */ addik r5, r1, 0; /* Arg 1: struct pt_regs *regs */ - addi r7, r0, 0; /* Arg 3: int in_syscall */ - bralid r15, do_signal; /* Handle any signals */ - add r6, r0, r0; /* Arg 2: sigset_t *oldset */ + bralid r15, do_notify_resume; /* Handle any signals */ + addi r6, r0, 0; /* Arg 2: int in_syscall */ + bri 1b /* Finally, return to user state. */ -1: set_bip; /* Ints masked for state restore */ +4: set_bip; /* Ints masked for state restore */ swi CURRENT_TASK, r0, PER_CPU(CURRENT_SAVE); /* save current */ VM_OFF; tophys(r1,r1); @@ -722,23 +686,23 @@ ret_from_irq: lwi r11, r1, PT_MODE; bnei r11, 2f; +1: lwi r11, CURRENT_TASK, TS_THREAD_INFO; - lwi r11, r11, TI_FLAGS; /* MS: get flags from thread info */ - andi r11, r11, _TIF_NEED_RESCHED; + lwi r19, r11, TI_FLAGS; /* MS: get flags from thread info */ + andi r11, r19, _TIF_NEED_RESCHED; beqi r11, 5f bralid r15, schedule; nop; /* delay slot */ + bri 1b /* Maybe handle a signal */ -5: lwi r11, CURRENT_TASK, TS_THREAD_INFO; /* MS: get thread info */ - lwi r11, r11, TI_FLAGS; /* get flags in thread info */ - andi r11, r11, _TIF_SIGPENDING; +5: andi r11, r19, _TIF_SIGPENDING | _TIF_NOTIFY_RESUME; beqid r11, no_intr_resched /* Handle a signal return; Pending signals should be in r18. */ - addi r7, r0, 0; /* Arg 3: int in_syscall */ addik r5, r1, 0; /* Arg 1: struct pt_regs *regs */ - bralid r15, do_signal; /* Handle any signals */ - add r6, r0, r0; /* Arg 2: sigset_t *oldset */ + bralid r15, do_notify_resume; /* Handle any signals */ + addi r6, r0, 0; /* Arg 2: int in_syscall */ + bri 1b /* Finally, return to user state. */ no_intr_resched: @@ -856,29 +820,29 @@ dbtrap_call: /* Return point for kernel/user entry + 8 because of rtsd r15, 8 */ lwi r11, r1, PT_MODE; bnei r11, 2f; /* MS: Return to user space - gdb */ +1: /* Get current task ptr into r11 */ lwi r11, CURRENT_TASK, TS_THREAD_INFO; /* get thread info */ - lwi r11, r11, TI_FLAGS; /* get flags in thread info */ - andi r11, r11, _TIF_NEED_RESCHED; + lwi r19, r11, TI_FLAGS; /* get flags in thread info */ + andi r11, r19, _TIF_NEED_RESCHED; beqi r11, 5f; /* Call the scheduler before returning from a syscall/trap. */ bralid r15, schedule; /* Call scheduler */ nop; /* delay slot */ + bri 1b /* Maybe handle a signal */ -5: lwi r11, CURRENT_TASK, TS_THREAD_INFO; /* get thread info */ - lwi r11, r11, TI_FLAGS; /* get flags in thread info */ - andi r11, r11, _TIF_SIGPENDING; - beqi r11, 1f; /* Signals to handle, handle them */ +5: andi r11, r19, _TIF_SIGPENDING | _TIF_NOTIFY_RESUME; + beqi r11, 4f; /* Signals to handle, handle them */ addik r5, r1, 0; /* Arg 1: struct pt_regs *regs */ - addi r7, r0, 0; /* Arg 3: int in_syscall */ - bralid r15, do_signal; /* Handle any signals */ - add r6, r0, r0; /* Arg 2: sigset_t *oldset */ + bralid r15, do_notify_resume; /* Handle any signals */ + addi r6, r0, 0; /* Arg 2: int in_syscall */ + bri 1b /* Finally, return to user state. */ -1: swi CURRENT_TASK, r0, PER_CPU(CURRENT_SAVE); /* save current */ +4: swi CURRENT_TASK, r0, PER_CPU(CURRENT_SAVE); /* save current */ VM_OFF; tophys(r1,r1); /* MS: Restore all regs */ diff --git a/arch/microblaze/kernel/exceptions.c b/arch/microblaze/kernel/exceptions.c index 6348dc82f42..42dd12a62ff 100644 --- a/arch/microblaze/kernel/exceptions.c +++ b/arch/microblaze/kernel/exceptions.c @@ -13,11 +13,11 @@ * This file handles the architecture-dependent parts of hardware exceptions */ +#include <linux/export.h> #include <linux/kernel.h> #include <linux/signal.h> #include <linux/sched.h> #include <linux/kallsyms.h> -#include <linux/module.h> #include <asm/exceptions.h> #include <asm/entry.h> /* For KM CPU var */ @@ -40,7 +40,7 @@ void die(const char *str, struct pt_regs *fp, long err) { console_verbose(); spin_lock_irq(&die_lock); - printk(KERN_WARNING "Oops: %s, sig: %ld\n", str, err); + pr_warn("Oops: %s, sig: %ld\n", str, err); show_regs(fp); spin_unlock_irq(&die_lock); /* do_exit() should take care of panic'ing from an interrupt @@ -61,9 +61,9 @@ void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr) { siginfo_t info; - if (kernel_mode(regs)) { + if (kernel_mode(regs)) die("Exception in kernel mode", regs, signr); - } + info.si_signo = signr; info.si_errno = 0; info.si_code = code; @@ -79,8 +79,7 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type, #endif #if 0 - printk(KERN_WARNING "Exception %02x in %s mode, FSR=%08x PC=%08x " \ - "ESR=%08x\n", + pr_warn("Exception %02x in %s mode, FSR=%08x PC=%08x ESR=%08x\n", type, user_mode(regs) ? "user" : "kernel", fsr, (unsigned int) regs->pc, (unsigned int) regs->esr); #endif @@ -92,8 +91,7 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type, _exception(SIGILL, regs, ILL_ILLOPC, addr); return; } - printk(KERN_WARNING "Illegal opcode exception " \ - "in kernel mode.\n"); + pr_warn("Illegal opcode exception in kernel mode.\n"); die("opcode exception", regs, SIGBUS); break; case MICROBLAZE_IBUS_EXCEPTION: @@ -102,8 +100,7 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type, _exception(SIGBUS, regs, BUS_ADRERR, addr); return; } - printk(KERN_WARNING "Instruction bus error exception " \ - "in kernel mode.\n"); + pr_warn("Instruction bus error exception in kernel mode.\n"); die("bus exception", regs, SIGBUS); break; case MICROBLAZE_DBUS_EXCEPTION: @@ -112,8 +109,7 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type, _exception(SIGBUS, regs, BUS_ADRERR, addr); return; } - printk(KERN_WARNING "Data bus error exception " \ - "in kernel mode.\n"); + pr_warn("Data bus error exception in kernel mode.\n"); die("bus exception", regs, SIGBUS); break; case MICROBLAZE_DIV_ZERO_EXCEPTION: @@ -122,8 +118,7 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type, _exception(SIGFPE, regs, FPE_INTDIV, addr); return; } - printk(KERN_WARNING "Divide by zero exception " \ - "in kernel mode.\n"); + pr_warn("Divide by zero exception in kernel mode.\n"); die("Divide by zero exception", regs, SIGBUS); break; case MICROBLAZE_FPU_EXCEPTION: @@ -151,8 +146,8 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type, #endif default: /* FIXME what to do in unexpected exception */ - printk(KERN_WARNING "Unexpected exception %02x " - "PC=%08x in %s mode\n", type, (unsigned int) addr, + pr_warn("Unexpected exception %02x PC=%08x in %s mode\n", + type, (unsigned int) addr, kernel_mode(regs) ? "kernel" : "user"); } return; diff --git a/arch/microblaze/kernel/ftrace.c b/arch/microblaze/kernel/ftrace.c index 357d56abe24..bbcd2533766 100644 --- a/arch/microblaze/kernel/ftrace.c +++ b/arch/microblaze/kernel/ftrace.c @@ -35,18 +35,18 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr) * happen. This tool is too much intrusive to * ignore such a protection. */ - asm volatile(" 1: lwi %0, %2, 0; \ - 2: swi %3, %2, 0; \ - addik %1, r0, 0; \ - 3: \ - .section .fixup, \"ax\"; \ - 4: brid 3b; \ - addik %1, r0, 1; \ - .previous; \ - .section __ex_table,\"a\"; \ - .word 1b,4b; \ - .word 2b,4b; \ - .previous;" \ + asm volatile(" 1: lwi %0, %2, 0;" \ + "2: swi %3, %2, 0;" \ + " addik %1, r0, 0;" \ + "3:" \ + " .section .fixup, \"ax\";" \ + "4: brid 3b;" \ + " addik %1, r0, 1;" \ + " .previous;" \ + " .section __ex_table,\"a\";" \ + " .word 1b,4b;" \ + " .word 2b,4b;" \ + " .previous;" \ : "=&r" (old), "=r" (faulted) : "r" (parent), "r" (return_hooker) ); @@ -81,16 +81,16 @@ static int ftrace_modify_code(unsigned long addr, unsigned int value) { int faulted = 0; - __asm__ __volatile__(" 1: swi %2, %1, 0; \ - addik %0, r0, 0; \ - 2: \ - .section .fixup, \"ax\"; \ - 3: brid 2b; \ - addik %0, r0, 1; \ - .previous; \ - .section __ex_table,\"a\"; \ - .word 1b,3b; \ - .previous;" \ + __asm__ __volatile__(" 1: swi %2, %1, 0;" \ + " addik %0, r0, 0;" \ + "2:" \ + " .section .fixup, \"ax\";" \ + "3: brid 2b;" \ + " addik %0, r0, 1;" \ + " .previous;" \ + " .section __ex_table,\"a\";" \ + " .word 1b,3b;" \ + " .previous;" \ : "=r" (faulted) : "r" (addr), "r" (value) ); @@ -171,11 +171,8 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) return ret; } -int __init ftrace_dyn_arch_init(void *data) +int __init ftrace_dyn_arch_init(void) { - /* The return code is retured via data */ - *(unsigned long *)data = 0; - return 0; } diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S index 77320b8fc16..4655ff342c6 100644 --- a/arch/microblaze/kernel/head.S +++ b/arch/microblaze/kernel/head.S @@ -63,9 +63,11 @@ ENTRY(_start) real_start: #endif - mfs r1, rmsr - andi r1, r1, ~2 - mts rmsr, r1 + mts rmsr, r0 +/* Disable stack protection from bootloader */ + mts rslr, r0 + addi r8, r0, 0xFFFFFFFF + mts rshr, r8 /* * According to Xilinx, msrclr instruction behaves like 'mfs rX,rpc' * if the msrclr instruction is not enabled. We use this to detect @@ -73,6 +75,7 @@ real_start: * r8 == 0 - msr instructions are implemented * r8 != 0 - msr instructions are not implemented */ + mfs r1, rmsr msrclr r8, 0 /* clear nothing - just read msr for test */ cmpu r8, r8, r1 /* r1 must contain msr reg content */ @@ -96,7 +99,7 @@ big_endian: _prepare_copy_fdt: or r11, r0, r0 /* incremment */ ori r4, r0, TOPHYS(_fdt_start) - ori r3, r0, (0x4000 - 4) + ori r3, r0, (0x8000 - 4) _copy_fdt: lw r12, r7, r11 /* r12 = r7 + r11 */ sw r12, r4, r11 /* addr[r4 + r11] = r12 */ @@ -110,31 +113,35 @@ no_fdt_arg: #ifndef CONFIG_CMDLINE_BOOL /* * handling command line - * copy command line to __init_end. There is space for storing command line. + * copy command line directly to cmd_line placed in data section. */ - or r6, r0, r0 /* incremment */ - ori r4, r0, __init_end /* load address of command line */ + beqid r5, skip /* Skip if NULL pointer */ + or r11, r0, r0 /* incremment */ + ori r4, r0, cmd_line /* load address of command line */ tophys(r4,r4) /* convert to phys address */ ori r3, r0, COMMAND_LINE_SIZE - 1 /* number of loops */ _copy_command_line: - lbu r2, r5, r6 /* r2=r5+r6 - r5 contain pointer to command line */ - sb r2, r4, r6 /* addr[r4+r6]= r2*/ - addik r6, r6, 1 /* increment counting */ + /* r2=r5+r6 - r5 contain pointer to command line */ + lbu r2, r5, r11 + beqid r2, skip /* Skip if no data */ + sb r2, r4, r11 /* addr[r4+r6]= r2 */ + addik r11, r11, 1 /* increment counting */ bgtid r3, _copy_command_line /* loop for all entries */ - addik r3, r3, -1 /* descrement loop */ + addik r3, r3, -1 /* decrement loop */ addik r5, r4, 0 /* add new space for command line */ tovirt(r5,r5) +skip: #endif /* CONFIG_CMDLINE_BOOL */ #ifdef NOT_COMPILE /* save bram context */ - or r6, r0, r0 /* incremment */ + or r11, r0, r0 /* incremment */ ori r4, r0, TOPHYS(_bram_load_start) /* save bram context */ ori r3, r0, (LMB_SIZE - 4) _copy_bram: - lw r7, r0, r6 /* r7 = r0 + r6 */ - sw r7, r4, r6 /* addr[r4 + r6] = r7*/ - addik r6, r6, 4 /* increment counting */ + lw r7, r0, r11 /* r7 = r0 + r6 */ + sw r7, r4, r11 /* addr[r4 + r6] = r7 */ + addik r11, r11, 4 /* increment counting */ bgtid r3, _copy_bram /* loop for all entries */ addik r3, r3, -4 /* descrement loop */ #endif @@ -150,6 +157,7 @@ _copy_bram: _invalidate: mts rtlbx, r3 mts rtlbhi, r0 /* flush: ensure V is clear */ + mts rtlblo, r0 bgtid r3, _invalidate /* loop for all entries */ addik r3, r3, -1 /* sync */ @@ -169,6 +177,53 @@ _invalidate: addik r3,r0, CONFIG_KERNEL_START /* Load the kernel virtual address */ tophys(r4,r3) /* Load the kernel physical address */ + /* start to do TLB calculation */ + addik r12, r0, _end + rsub r12, r3, r12 + addik r12, r12, CONFIG_LOWMEM_SIZE >> PTE_SHIFT /* that's the pad */ + + or r9, r0, r0 /* TLB0 = 0 */ + or r10, r0, r0 /* TLB1 = 0 */ + + addik r11, r12, -0x1000000 + bgei r11, GT16 /* size is greater than 16MB */ + addik r11, r12, -0x0800000 + bgei r11, GT8 /* size is greater than 8MB */ + addik r11, r12, -0x0400000 + bgei r11, GT4 /* size is greater than 4MB */ + /* size is less than 4MB */ + addik r11, r12, -0x0200000 + bgei r11, GT2 /* size is greater than 2MB */ + addik r9, r0, 0x0100000 /* TLB0 must be 1MB */ + addik r11, r12, -0x0100000 + bgei r11, GT1 /* size is greater than 1MB */ + /* TLB1 is 0 which is setup above */ + bri tlb_end +GT4: /* r11 contains the rest - will be either 1 or 4 */ + ori r9, r0, 0x400000 /* TLB0 is 4MB */ + bri TLB1 +GT16: /* TLB0 is 16MB */ + addik r9, r0, 0x1000000 /* means TLB0 is 16MB */ +TLB1: + /* must be used r2 because of subtract if failed */ + addik r2, r11, -0x0400000 + bgei r2, GT20 /* size is greater than 16MB */ + /* size is >16MB and <20MB */ + addik r11, r11, -0x0100000 + bgei r11, GT17 /* size is greater than 17MB */ + /* kernel is >16MB and < 17MB */ +GT1: + addik r10, r0, 0x0100000 /* means TLB1 is 1MB */ + bri tlb_end +GT2: /* TLB0 is 0 and TLB1 will be 4MB */ +GT17: /* TLB1 is 4MB - kernel size <20MB */ + addik r10, r0, 0x0400000 /* means TLB1 is 4MB */ + bri tlb_end +GT8: /* TLB0 is still zero that's why I can use only TLB1 */ +GT20: /* TLB1 is 16MB - kernel size >20MB */ + addik r10, r0, 0x1000000 /* means TLB1 is 16MB */ +tlb_end: + /* * Configure and load two entries into TLB slots 0 and 1. * In case we are pinning TLBs, these are reserved in by the @@ -178,29 +233,82 @@ _invalidate: andi r4,r4,0xfffffc00 /* Mask off the real page number */ ori r4,r4,(TLB_WR | TLB_EX) /* Set the write and execute bits */ + /* + * TLB0 is always used - check if is not zero (r9 stores TLB0 value) + * if is use TLB1 value and clear it (r10 stores TLB1 value) + */ + bnei r9, tlb0_not_zero + add r9, r10, r0 + add r10, r0, r0 +tlb0_not_zero: + + /* look at the code below */ + ori r30, r0, 0x200 + andi r29, r9, 0x100000 + bneid r29, 1f + addik r30, r30, 0x80 + andi r29, r9, 0x400000 + bneid r29, 1f + addik r30, r30, 0x80 + andi r29, r9, 0x1000000 + bneid r29, 1f + addik r30, r30, 0x80 +1: andi r3,r3,0xfffffc00 /* Mask off the effective page number */ - ori r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_16M)) + ori r3,r3,(TLB_VALID) + or r3, r3, r30 - mts rtlbx,r0 /* TLB slow 0 */ + /* Load tlb_skip size value which is index to first unused TLB entry */ + lwi r11, r0, TOPHYS(tlb_skip) + mts rtlbx,r11 /* TLB slow 0 */ mts rtlblo,r4 /* Load the data portion of the entry */ mts rtlbhi,r3 /* Load the tag portion of the entry */ - addik r4, r4, 0x01000000 /* Map next 16 M entries */ - addik r3, r3, 0x01000000 + /* Increase tlb_skip size */ + addik r11, r11, 1 + swi r11, r0, TOPHYS(tlb_skip) + + /* TLB1 can be zeroes that's why we not setup it */ + beqi r10, jump_over2 + + /* look at the code below */ + ori r30, r0, 0x200 + andi r29, r10, 0x100000 + bneid r29, 1f + addik r30, r30, 0x80 + andi r29, r10, 0x400000 + bneid r29, 1f + addik r30, r30, 0x80 + andi r29, r10, 0x1000000 + bneid r29, 1f + addik r30, r30, 0x80 +1: + addk r4, r4, r9 /* previous addr + TLB0 size */ + addk r3, r3, r9 + + andi r3,r3,0xfffffc00 /* Mask off the effective page number */ + ori r3,r3,(TLB_VALID) + or r3, r3, r30 - ori r6,r0,1 /* TLB slot 1 */ - mts rtlbx,r6 + lwi r11, r0, TOPHYS(tlb_skip) + mts rtlbx, r11 /* r11 is used from TLB0 */ mts rtlblo,r4 /* Load the data portion of the entry */ mts rtlbhi,r3 /* Load the tag portion of the entry */ + /* Increase tlb_skip size */ + addik r11, r11, 1 + swi r11, r0, TOPHYS(tlb_skip) + +jump_over2: /* * Load a TLB entry for LMB, since we need access to * the exception vectors, using a 4k real==virtual mapping. */ - ori r6,r0,3 /* TLB slot 3 */ - mts rtlbx,r6 + /* Use temporary TLB_ID for LMB - clear this temporary mapping later */ + ori r11, r0, MICROBLAZE_LMB_TLB_ID + mts rtlbx,r11 ori r4,r0,(TLB_WR | TLB_EX) ori r3,r0,(TLB_VALID | TLB_PAGESZ(PAGESZ_4K)) @@ -238,8 +346,8 @@ start_here: * Please see $(ARCH)/mach-$(SUBARCH)/setup.c for * the function. */ - addik r9, r0, machine_early_init - brald r15, r9 + addik r11, r0, machine_early_init + brald r15, r11 nop #ifndef CONFIG_MMU @@ -268,8 +376,7 @@ start_here: /* Load up the kernel context */ kernel_load_context: - # Keep entry 0 and 1 valid. Entry 3 mapped to LMB can go away. - ori r5,r0,3 + ori r5, r0, MICROBLAZE_LMB_TLB_ID mts rtlbx,r5 nop mts rtlbhi,r0 diff --git a/arch/microblaze/kernel/heartbeat.c b/arch/microblaze/kernel/heartbeat.c index 154756f3c69..4643e3ab941 100644 --- a/arch/microblaze/kernel/heartbeat.c +++ b/arch/microblaze/kernel/heartbeat.c @@ -17,7 +17,7 @@ static unsigned int base_addr; -void heartbeat(void) +void microblaze_heartbeat(void) { static unsigned int cnt, period, dist; @@ -42,7 +42,7 @@ void heartbeat(void) } } -void setup_heartbeat(void) +void microblaze_setup_heartbeat(void) { struct device_node *gpio = NULL; int *prop; @@ -61,7 +61,7 @@ void setup_heartbeat(void) if (gpio) { base_addr = be32_to_cpup(of_get_property(gpio, "reg", NULL)); base_addr = (unsigned long) ioremap(base_addr, PAGE_SIZE); - printk(KERN_NOTICE "Heartbeat GPIO at 0x%x\n", base_addr); + pr_notice("Heartbeat GPIO at 0x%x\n", base_addr); /* GPIO is configured as output */ prop = (int *) of_get_property(gpio, "xlnx,is-bidir", NULL); diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S index e62be837960..0b11a4469de 100644 --- a/arch/microblaze/kernel/hw_exception_handler.S +++ b/arch/microblaze/kernel/hw_exception_handler.S @@ -75,6 +75,7 @@ #include <asm/mmu.h> #include <asm/pgtable.h> #include <asm/signal.h> +#include <asm/registers.h> #include <asm/asm-offsets.h> #undef DEBUG @@ -146,15 +147,14 @@ or r3, r0, NUM_TO_REG (regnum); /* Shift right instruction depending on available configuration */ - #if CONFIG_XILINX_MICROBLAZE0_USE_BARREL > 0 - #define BSRLI(rD, rA, imm) \ - bsrli rD, rA, imm - #else - #define BSRLI(rD, rA, imm) BSRLI ## imm (rD, rA) + #if CONFIG_XILINX_MICROBLAZE0_USE_BARREL == 0 /* Only the used shift constants defined here - add more if needed */ #define BSRLI2(rD, rA) \ srl rD, rA; /* << 1 */ \ srl rD, rD; /* << 2 */ + #define BSRLI4(rD, rA) \ + BSRLI2(rD, rA); \ + BSRLI2(rD, rD) #define BSRLI10(rD, rA) \ srl rD, rA; /* << 1 */ \ srl rD, rD; /* << 2 */ \ @@ -169,7 +169,33 @@ #define BSRLI20(rD, rA) \ BSRLI10(rD, rA); \ BSRLI10(rD, rD) + + .macro bsrli, rD, rA, IMM + .if (\IMM) == 2 + BSRLI2(\rD, \rA) + .elseif (\IMM) == 10 + BSRLI10(\rD, \rA) + .elseif (\IMM) == 12 + BSRLI2(\rD, \rA) + BSRLI10(\rD, \rD) + .elseif (\IMM) == 14 + BSRLI4(\rD, \rA) + BSRLI10(\rD, \rD) + .elseif (\IMM) == 20 + BSRLI20(\rD, \rA) + .elseif (\IMM) == 24 + BSRLI4(\rD, \rA) + BSRLI20(\rD, \rD) + .elseif (\IMM) == 28 + BSRLI4(\rD, \rA) + BSRLI4(\rD, \rD) + BSRLI20(\rD, \rD) + .else + .error "BSRLI shift macros \IMM" + .endif + .endm #endif + #endif /* CONFIG_MMU */ .extern other_exception_handler /* Defined in exception.c */ @@ -192,8 +218,8 @@ * - W S REG EXC * * - * STACK FRAME STRUCTURE (for NO_MMU) - * --------------------------------- + * STACK FRAME STRUCTURE (for CONFIG_MMU=n) + * ---------------------------------------- * * +-------------+ + 0 * | MSR | @@ -581,7 +607,7 @@ ex_handler_done: * tried to access a kernel or read-protected page - always * a SEGV). All other faults here must be stores, so no * need to check ESR_S as well. */ - andi r4, r4, 0x800 /* ESR_Z - zone protection */ + andi r4, r4, ESR_DIZ /* ESR_Z - zone protection */ bnei r4, ex2 ori r4, r0, swapper_pg_dir @@ -595,25 +621,25 @@ ex_handler_done: * tried to access a kernel or read-protected page - always * a SEGV). All other faults here must be stores, so no * need to check ESR_S as well. */ - andi r4, r4, 0x800 /* ESR_Z */ + andi r4, r4, ESR_DIZ /* ESR_Z */ bnei r4, ex2 /* get current task address */ addi r4 ,CURRENT_TASK, TOPHYS(0); lwi r4, r4, TASK_THREAD+PGDIR ex4: tophys(r4,r4) - BSRLI(r5,r3,20) /* Create L1 (pgdir/pmd) address */ - andi r5, r5, 0xffc + /* Create L1 (pgdir/pmd) address */ + bsrli r5, r3, PGDIR_SHIFT - 2 + andi r5, r5, PAGE_SIZE - 4 /* Assume pgdir aligned on 4K boundary, no need for "andi r4,r4,0xfffff003" */ or r4, r4, r5 lwi r4, r4, 0 /* Get L1 entry */ - andi r5, r4, 0xfffff000 /* Extract L2 (pte) base address */ + andi r5, r4, PAGE_MASK /* Extract L2 (pte) base address */ beqi r5, ex2 /* Bail if no table */ tophys(r5,r5) - BSRLI(r6,r3,10) /* Compute PTE address */ - andi r6, r6, 0xffc - andi r5, r5, 0xfffff003 + bsrli r6, r3, PTE_SHIFT /* Compute PTE address */ + andi r6, r6, PAGE_SIZE - 4 or r5, r5, r6 lwi r4, r5, 0 /* Get Linux PTE */ @@ -632,7 +658,9 @@ ex_handler_done: * Many of these bits are software only. Bits we don't set * here we (properly should) assume have the appropriate value. */ - andni r4, r4, 0x0ce2 /* Make sure 20, 21 are zero */ +/* Ignore memory coherent, just LSB on ZSEL is used + EX/WR */ + andi r4, r4, PAGE_MASK | TLB_EX | TLB_WR | \ + TLB_ZSEL(1) | TLB_ATTR_MASK ori r4, r4, _PAGE_HWEXEC /* make it executable */ /* find the TLB index that caused the fault. It has to be here*/ @@ -701,18 +729,18 @@ ex_handler_done: lwi r4, r4, TASK_THREAD+PGDIR ex6: tophys(r4,r4) - BSRLI(r5,r3,20) /* Create L1 (pgdir/pmd) address */ - andi r5, r5, 0xffc + /* Create L1 (pgdir/pmd) address */ + bsrli r5, r3, PGDIR_SHIFT - 2 + andi r5, r5, PAGE_SIZE - 4 /* Assume pgdir aligned on 4K boundary, no need for "andi r4,r4,0xfffff003" */ or r4, r4, r5 lwi r4, r4, 0 /* Get L1 entry */ - andi r5, r4, 0xfffff000 /* Extract L2 (pte) base address */ + andi r5, r4, PAGE_MASK /* Extract L2 (pte) base address */ beqi r5, ex7 /* Bail if no table */ tophys(r5,r5) - BSRLI(r6,r3,10) /* Compute PTE address */ - andi r6, r6, 0xffc - andi r5, r5, 0xfffff003 + bsrli r6, r3, PTE_SHIFT /* Compute PTE address */ + andi r6, r6, PAGE_SIZE - 4 or r5, r5, r6 lwi r4, r5, 0 /* Get Linux PTE */ @@ -731,7 +759,8 @@ ex_handler_done: * here we (properly should) assume have the appropriate value. */ brid finish_tlb_load - andni r4, r4, 0x0ce2 /* Make sure 20, 21 are zero */ + andi r4, r4, PAGE_MASK | TLB_EX | TLB_WR | \ + TLB_ZSEL(1) | TLB_ATTR_MASK ex7: /* The bailout. Restore registers to pre-exception conditions * and call the heavyweights to help us out. @@ -771,18 +800,18 @@ ex_handler_done: lwi r4, r4, TASK_THREAD+PGDIR ex9: tophys(r4,r4) - BSRLI(r5,r3,20) /* Create L1 (pgdir/pmd) address */ - andi r5, r5, 0xffc + /* Create L1 (pgdir/pmd) address */ + bsrli r5, r3, PGDIR_SHIFT - 2 + andi r5, r5, PAGE_SIZE - 4 /* Assume pgdir aligned on 4K boundary, no need for "andi r4,r4,0xfffff003" */ or r4, r4, r5 lwi r4, r4, 0 /* Get L1 entry */ - andi r5, r4, 0xfffff000 /* Extract L2 (pte) base address */ + andi r5, r4, PAGE_MASK /* Extract L2 (pte) base address */ beqi r5, ex10 /* Bail if no table */ tophys(r5,r5) - BSRLI(r6,r3,10) /* Compute PTE address */ - andi r6, r6, 0xffc - andi r5, r5, 0xfffff003 + bsrli r6, r3, PTE_SHIFT /* Compute PTE address */ + andi r6, r6, PAGE_SIZE - 4 or r5, r5, r6 lwi r4, r5, 0 /* Get Linux PTE */ @@ -801,7 +830,8 @@ ex_handler_done: * here we (properly should) assume have the appropriate value. */ brid finish_tlb_load - andni r4, r4, 0x0ce2 /* Make sure 20, 21 are zero */ + andi r4, r4, PAGE_MASK | TLB_EX | TLB_WR | \ + TLB_ZSEL(1) | TLB_ATTR_MASK ex10: /* The bailout. Restore registers to pre-exception conditions * and call the heavyweights to help us out. @@ -820,19 +850,26 @@ ex_handler_done: * Upon exit, we reload everything and RFI. * A common place to load the TLB. */ +.section .data +.align 4 +.global tlb_skip + tlb_skip: + .long MICROBLAZE_TLB_SKIP tlb_index: - .long 1 /* MS: storing last used tlb index */ + /* MS: storing last used tlb index */ + .long MICROBLAZE_TLB_SIZE/2 +.previous finish_tlb_load: /* MS: load the last used TLB index. */ lwi r5, r0, TOPHYS(tlb_index) addik r5, r5, 1 /* MS: inc tlb_index -> use next one */ /* MS: FIXME this is potential fault, because this is mask not count */ - andi r5, r5, (MICROBLAZE_TLB_SIZE-1) + andi r5, r5, MICROBLAZE_TLB_SIZE - 1 ori r6, r0, 1 cmp r31, r5, r6 blti r31, ex12 - addik r5, r6, 1 + lwi r5, r0, TOPHYS(tlb_skip) ex12: /* MS: save back current TLB index */ swi r5, r0, TOPHYS(tlb_index) @@ -847,8 +884,14 @@ ex_handler_done: * set of bits. These are size, valid, E, U0, and ensure * bits 20 and 21 are zero. */ - andi r3, r3, 0xfffff000 - ori r3, r3, 0x0c0 + andi r3, r3, PAGE_MASK +#ifdef CONFIG_MICROBLAZE_64K_PAGES + ori r3, r3, TLB_VALID | TLB_PAGESZ(PAGESZ_64K) +#elif CONFIG_MICROBLAZE_16K_PAGES + ori r3, r3, TLB_VALID | TLB_PAGESZ(PAGESZ_16K) +#else + ori r3, r3, TLB_VALID | TLB_PAGESZ(PAGESZ_4K) +#endif mts rtlbhi, r3 /* Load TLB HI */ nop @@ -904,7 +947,7 @@ ex_handler_done: .ent _unaligned_data_exception _unaligned_data_exception: andi r8, r3, 0x3E0; /* Mask and extract the register operand */ - BSRLI(r8,r8,2); /* r8 >> 2 = register operand * 8 */ + bsrli r8, r8, 2; /* r8 >> 2 = register operand * 8 */ andi r6, r3, 0x400; /* Extract ESR[S] */ bneid r6, ex_sw_vm; andi r6, r3, 0x800; /* Extract ESR[W] - delay slot */ diff --git a/arch/microblaze/kernel/init_task.c b/arch/microblaze/kernel/init_task.c deleted file mode 100644 index b5d711f94ff..00000000000 --- a/arch/microblaze/kernel/init_task.c +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (C) 2009 Michal Simek <monstr@monstr.eu> - * Copyright (C) 2009 PetaLogix - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/init_task.h> -#include <linux/fs.h> -#include <linux/mqueue.h> - -#include <asm/pgtable.h> - -static struct signal_struct init_signals = INIT_SIGNALS(init_signals); -static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); - -union thread_union init_thread_union __init_task_data = - { INIT_THREAD_INFO(init_task) }; - -struct task_struct init_task = INIT_TASK(init_task); -EXPORT_SYMBOL(init_task); diff --git a/arch/microblaze/kernel/intc.c b/arch/microblaze/kernel/intc.c index 44b177e2ab1..15c7c12ea0e 100644 --- a/arch/microblaze/kernel/intc.c +++ b/arch/microblaze/kernel/intc.c @@ -1,5 +1,6 @@ /* - * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu> + * Copyright (C) 2007-2013 Michal Simek <monstr@monstr.eu> + * Copyright (C) 2012-2013 Xilinx, Inc. * Copyright (C) 2007-2009 PetaLogix * Copyright (C) 2006 Atmark Techno, Inc. * @@ -8,24 +9,15 @@ * for more details. */ -#include <linux/init.h> +#include <linux/irqdomain.h> #include <linux/irq.h> -#include <asm/page.h> +#include <linux/of_address.h> #include <linux/io.h> #include <linux/bug.h> -#include <asm/prom.h> -#include <asm/irq.h> +#include "../../drivers/irqchip/irqchip.h" -#ifdef CONFIG_SELFMOD_INTC -#include <asm/selfmod.h> -#define INTC_BASE BARRIER_BASE_ADDR -#else -static unsigned int intc_baseaddr; -#define INTC_BASE intc_baseaddr -#endif - -unsigned int nr_irq; +static void __iomem *intc_baseaddr; /* No one else should require these constants, so define them locally here. */ #define ISR 0x00 /* Interrupt Status Register */ @@ -40,31 +32,55 @@ unsigned int nr_irq; #define MER_ME (1<<0) #define MER_HIE (1<<1) +static unsigned int (*read_fn)(void __iomem *); +static void (*write_fn)(u32, void __iomem *); + +static void intc_write32(u32 val, void __iomem *addr) +{ + iowrite32(val, addr); +} + +static unsigned int intc_read32(void __iomem *addr) +{ + return ioread32(addr); +} + +static void intc_write32_be(u32 val, void __iomem *addr) +{ + iowrite32be(val, addr); +} + +static unsigned int intc_read32_be(void __iomem *addr) +{ + return ioread32be(addr); +} + static void intc_enable_or_unmask(struct irq_data *d) { unsigned long mask = 1 << d->hwirq; pr_debug("enable_or_unmask: %ld\n", d->hwirq); - out_be32(INTC_BASE + SIE, mask); /* ack level irqs because they can't be acked during * ack function since the handle_level_irq function * acks the irq before calling the interrupt handler */ if (irqd_is_level_type(d)) - out_be32(INTC_BASE + IAR, mask); + write_fn(mask, intc_baseaddr + IAR); + + write_fn(mask, intc_baseaddr + SIE); } static void intc_disable_or_mask(struct irq_data *d) { pr_debug("disable: %ld\n", d->hwirq); - out_be32(INTC_BASE + CIE, 1 << d->hwirq); + write_fn(1 << d->hwirq, intc_baseaddr + CIE); } static void intc_ack(struct irq_data *d) { pr_debug("ack: %ld\n", d->hwirq); - out_be32(INTC_BASE + IAR, 1 << d->hwirq); + write_fn(1 << d->hwirq, intc_baseaddr + IAR); } static void intc_mask_ack(struct irq_data *d) @@ -72,8 +88,8 @@ static void intc_mask_ack(struct irq_data *d) unsigned long mask = 1 << d->hwirq; pr_debug("disable_and_ack: %ld\n", d->hwirq); - out_be32(INTC_BASE + CIE, mask); - out_be32(INTC_BASE + IAR, mask); + write_fn(mask, intc_baseaddr + CIE); + write_fn(mask, intc_baseaddr + IAR); } static struct irq_chip intc_dev = { @@ -84,78 +100,98 @@ static struct irq_chip intc_dev = { .irq_mask_ack = intc_mask_ack, }; -unsigned int get_irq(struct pt_regs *regs) +static struct irq_domain *root_domain; + +unsigned int get_irq(void) { - int irq; + unsigned int hwirq, irq = -1; - /* - * NOTE: This function is the one that needs to be improved in - * order to handle multiple interrupt controllers. It currently - * is hardcoded to check for interrupts only on the first INTC. - */ - irq = in_be32(INTC_BASE + IVR) + NO_IRQ_OFFSET; - pr_debug("get_irq: %d\n", irq); + hwirq = read_fn(intc_baseaddr + IVR); + if (hwirq != -1U) + irq = irq_find_mapping(root_domain, hwirq); + + pr_debug("get_irq: hwirq=%d, irq=%d\n", hwirq, irq); return irq; } -void __init init_IRQ(void) +static int xintc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw) { - u32 i, intr_mask; - struct device_node *intc = NULL; -#ifdef CONFIG_SELFMOD_INTC - unsigned int intc_baseaddr = 0; - static int arr_func[] = { - (int)&get_irq, - (int)&intc_enable_or_unmask, - (int)&intc_disable_or_mask, - (int)&intc_mask_ack, - (int)&intc_ack, - (int)&intc_end, - 0 - }; -#endif - intc = of_find_compatible_node(NULL, NULL, "xlnx,xps-intc-1.00.a"); - BUG_ON(!intc); - - intc_baseaddr = be32_to_cpup(of_get_property(intc, "reg", NULL)); - intc_baseaddr = (unsigned long) ioremap(intc_baseaddr, PAGE_SIZE); - nr_irq = be32_to_cpup(of_get_property(intc, - "xlnx,num-intr-inputs", NULL)); - - intr_mask = - be32_to_cpup(of_get_property(intc, "xlnx,kind-of-intr", NULL)); + u32 intr_mask = (u32)d->host_data; + + if (intr_mask & (1 << hw)) { + irq_set_chip_and_handler_name(irq, &intc_dev, + handle_edge_irq, "edge"); + irq_clear_status_flags(irq, IRQ_LEVEL); + } else { + irq_set_chip_and_handler_name(irq, &intc_dev, + handle_level_irq, "level"); + irq_set_status_flags(irq, IRQ_LEVEL); + } + return 0; +} + +static const struct irq_domain_ops xintc_irq_domain_ops = { + .xlate = irq_domain_xlate_onetwocell, + .map = xintc_map, +}; + +static int __init xilinx_intc_of_init(struct device_node *intc, + struct device_node *parent) +{ + u32 nr_irq, intr_mask; + int ret; + + intc_baseaddr = of_iomap(intc, 0); + BUG_ON(!intc_baseaddr); + + ret = of_property_read_u32(intc, "xlnx,num-intr-inputs", &nr_irq); + if (ret < 0) { + pr_err("%s: unable to read xlnx,num-intr-inputs\n", __func__); + return -EINVAL; + } + + ret = of_property_read_u32(intc, "xlnx,kind-of-intr", &intr_mask); + if (ret < 0) { + pr_err("%s: unable to read xlnx,kind-of-intr\n", __func__); + return -EINVAL; + } + if (intr_mask > (u32)((1ULL << nr_irq) - 1)) - printk(KERN_INFO " ERROR: Mismatch in kind-of-intr param\n"); + pr_info(" ERROR: Mismatch in kind-of-intr param\n"); + + pr_info("%s: num_irq=%d, edge=0x%x\n", + intc->full_name, nr_irq, intr_mask); -#ifdef CONFIG_SELFMOD_INTC - selfmod_function((int *) arr_func, intc_baseaddr); -#endif - printk(KERN_INFO "XPS intc #0 at 0x%08x, num_irq=%d, edge=0x%x\n", - intc_baseaddr, nr_irq, intr_mask); + write_fn = intc_write32; + read_fn = intc_read32; /* * Disable all external interrupts until they are * explicity requested. */ - out_be32(intc_baseaddr + IER, 0); + write_fn(0, intc_baseaddr + IER); /* Acknowledge any pending interrupts just in case. */ - out_be32(intc_baseaddr + IAR, 0xffffffff); + write_fn(0xffffffff, intc_baseaddr + IAR); /* Turn on the Master Enable. */ - out_be32(intc_baseaddr + MER, MER_HIE | MER_ME); - - for (i = IRQ_OFFSET; i < (nr_irq + IRQ_OFFSET); ++i) { - if (intr_mask & (0x00000001 << (i - IRQ_OFFSET))) { - irq_set_chip_and_handler_name(i, &intc_dev, - handle_edge_irq, "edge"); - irq_clear_status_flags(i, IRQ_LEVEL); - } else { - irq_set_chip_and_handler_name(i, &intc_dev, - handle_level_irq, "level"); - irq_set_status_flags(i, IRQ_LEVEL); - } - irq_get_irq_data(i)->hwirq = i - IRQ_OFFSET; + write_fn(MER_HIE | MER_ME, intc_baseaddr + MER); + if (!(read_fn(intc_baseaddr + MER) & (MER_HIE | MER_ME))) { + write_fn = intc_write32_be; + read_fn = intc_read32_be; + write_fn(MER_HIE | MER_ME, intc_baseaddr + MER); } + + /* Yeah, okay, casting the intr_mask to a void* is butt-ugly, but I'm + * lazy and Michal can clean it up to something nicer when he tests + * and commits this patch. ~~gcl */ + root_domain = irq_domain_add_linear(intc, nr_irq, &xintc_irq_domain_ops, + (void *)intr_mask); + + irq_set_default_host(root_domain); + + return 0; } + +IRQCHIP_DECLARE(xilinx_intc, "xlnx,xps-intc-1.00.a", xilinx_intc_of_init); diff --git a/arch/microblaze/kernel/irq.c b/arch/microblaze/kernel/irq.c index bbebcae72c0..11e24de91aa 100644 --- a/arch/microblaze/kernel/irq.c +++ b/arch/microblaze/kernel/irq.c @@ -17,10 +17,8 @@ #include <linux/seq_file.h> #include <linux/kernel_stat.h> #include <linux/irq.h> +#include <linux/irqchip.h> #include <linux/of_irq.h> -#include <linux/export.h> - -#include <asm/prom.h> static u32 concurrent_irq; @@ -31,14 +29,13 @@ void __irq_entry do_IRQ(struct pt_regs *regs) trace_hardirqs_off(); irq_enter(); - irq = get_irq(regs); + irq = get_irq(); next_irq: BUG_ON(!irq); - /* Substract 1 because of get_irq */ - generic_handle_irq(irq + IRQ_OFFSET - NO_IRQ_OFFSET); + generic_handle_irq(irq); - irq = get_irq(regs); - if (irq) { + irq = get_irq(); + if (irq != -1U) { pr_debug("next irq: %d\n", irq); ++concurrent_irq; goto next_irq; @@ -49,17 +46,8 @@ next_irq: trace_hardirqs_on(); } -/* MS: There is no any advance mapping mechanism. We are using simple 32bit - intc without any cascades or any connection that's why mapping is 1:1 */ -unsigned int irq_create_mapping(struct irq_host *host, irq_hw_number_t hwirq) -{ - return hwirq + IRQ_OFFSET; -} -EXPORT_SYMBOL_GPL(irq_create_mapping); - -unsigned int irq_create_of_mapping(struct device_node *controller, - const u32 *intspec, unsigned int intsize) +void __init init_IRQ(void) { - return intspec[0] + IRQ_OFFSET; + /* process the entire interrupt tree in one go */ + irqchip_init(); } -EXPORT_SYMBOL_GPL(irq_create_of_mapping); diff --git a/arch/microblaze/kernel/mcount.S b/arch/microblaze/kernel/mcount.S index e7eaa7a8cbd..fc1e1322ce4 100644 --- a/arch/microblaze/kernel/mcount.S +++ b/arch/microblaze/kernel/mcount.S @@ -138,7 +138,7 @@ NOALIGN_ENTRY(ftrace_call) #endif /* CONFIG_DYNAMIC_FTRACE */ /* static normal trace */ lwi r6, r1, 120; /* MS: load parent addr */ - addik r5, r15, 0; /* MS: load current function addr */ + addik r5, r15, -4; /* MS: load current function addr */ /* MS: here is dependency on previous code */ brald r15, r20; /* MS: jump to ftrace handler */ nop; diff --git a/arch/microblaze/kernel/microblaze_ksyms.c b/arch/microblaze/kernel/microblaze_ksyms.c index 49faeb42959..9f1d02c4c5c 100644 --- a/arch/microblaze/kernel/microblaze_ksyms.c +++ b/arch/microblaze/kernel/microblaze_ksyms.c @@ -7,7 +7,7 @@ * published by the Free Software Foundation. */ -#include <linux/module.h> +#include <linux/export.h> #include <linux/string.h> #include <linux/cryptohash.h> #include <linux/delay.h> @@ -18,13 +18,9 @@ #include <asm/cacheflush.h> #include <linux/io.h> #include <asm/page.h> -#include <asm/system.h> #include <linux/ftrace.h> #include <linux/uaccess.h> -extern char *_ebss; -EXPORT_SYMBOL_GPL(_ebss); - #ifdef CONFIG_FUNCTION_TRACER extern void _mcount(void); EXPORT_SYMBOL(_mcount); diff --git a/arch/microblaze/kernel/misc.S b/arch/microblaze/kernel/misc.S index 206da3da361..1dafddeb8a0 100644 --- a/arch/microblaze/kernel/misc.S +++ b/arch/microblaze/kernel/misc.S @@ -29,16 +29,16 @@ .type _tlbia, @function .align 4; _tlbia: - addik r12, r0, MICROBLAZE_TLB_SIZE - 1 /* flush all entries (63 - 3) */ + lwi r12, r0, tlb_skip; /* isync */ _tlbia_1: mts rtlbx, r12 nop mts rtlbhi, r0 /* flush: ensure V is clear */ nop - addik r11, r12, -2 + rsubi r11, r12, MICROBLAZE_TLB_SIZE - 1 bneid r11, _tlbia_1 /* loop for all entries */ - addik r12, r12, -1 + addik r12, r12, 1 /* sync */ rtsd r15, 8 nop @@ -75,7 +75,7 @@ early_console_reg_tlb_alloc: * Load a TLB entry for the UART, so that microblaze_progress() can use * the UARTs nice and early. We use a 4k real==virtual mapping. */ - ori r4, r0, MICROBLAZE_TLB_SIZE - 1 + lwi r4, r0, tlb_skip mts rtlbx, r4 /* TLB slot 63 */ or r4,r5,r0 @@ -89,6 +89,11 @@ early_console_reg_tlb_alloc: nop mts rtlbhi,r5 /* Load the tag portion of the entry */ nop + + lwi r5, r0, tlb_skip + addik r5, r5, 1 + swi r5, r0, tlb_skip + rtsd r15, 8 nop diff --git a/arch/microblaze/kernel/module.c b/arch/microblaze/kernel/module.c index f39257a5abc..182e6be856c 100644 --- a/arch/microblaze/kernel/module.c +++ b/arch/microblaze/kernel/module.c @@ -7,7 +7,7 @@ * published by the Free Software Foundation. */ -#include <linux/module.h> +#include <linux/export.h> #include <linux/moduleloader.h> #include <linux/kernel.h> #include <linux/elf.h> @@ -108,8 +108,7 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, break; default: - printk(KERN_ERR "module %s: " - "Unknown relocation: %u\n", + pr_err("module %s: Unknown relocation: %u\n", module->name, ELF32_R_TYPE(rela[i].r_info)); return -ENOEXEC; diff --git a/arch/microblaze/kernel/platform.c b/arch/microblaze/kernel/platform.c new file mode 100644 index 00000000000..b9529caa507 --- /dev/null +++ b/arch/microblaze/kernel/platform.c @@ -0,0 +1,30 @@ +/* + * Copyright 2008 Michal Simek <monstr@monstr.eu> + * + * based on virtex.c file + * + * Copyright 2007 Secret Lab Technologies Ltd. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/init.h> +#include <linux/of_platform.h> +#include <asm/prom.h> +#include <asm/setup.h> + +static struct of_device_id xilinx_of_bus_ids[] __initdata = { + { .compatible = "simple-bus", }, + { .compatible = "xlnx,compound", }, + {} +}; + +static int __init microblaze_device_probe(void) +{ + of_platform_bus_probe(NULL, xilinx_of_bus_ids, NULL); + of_platform_reset_gpio_probe(); + return 0; +} +device_initcall(microblaze_device_probe); diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c index 7dcb5bfffb7..b2dd37196b3 100644 --- a/arch/microblaze/kernel/process.c +++ b/arch/microblaze/kernel/process.c @@ -8,160 +8,82 @@ * for more details. */ -#include <linux/module.h> +#include <linux/cpu.h> +#include <linux/export.h> #include <linux/sched.h> #include <linux/pm.h> #include <linux/tick.h> #include <linux/bitops.h> -#include <asm/system.h> +#include <linux/ptrace.h> #include <asm/pgalloc.h> -#include <asm/uaccess.h> /* for USER_DS macros */ +#include <linux/uaccess.h> /* for USER_DS macros */ #include <asm/cacheflush.h> void show_regs(struct pt_regs *regs) { - printk(KERN_INFO " Registers dump: mode=%X\r\n", regs->pt_mode); - printk(KERN_INFO " r1=%08lX, r2=%08lX, r3=%08lX, r4=%08lX\n", + show_regs_print_info(KERN_INFO); + + pr_info(" Registers dump: mode=%X\r\n", regs->pt_mode); + pr_info(" r1=%08lX, r2=%08lX, r3=%08lX, r4=%08lX\n", regs->r1, regs->r2, regs->r3, regs->r4); - printk(KERN_INFO " r5=%08lX, r6=%08lX, r7=%08lX, r8=%08lX\n", + pr_info(" r5=%08lX, r6=%08lX, r7=%08lX, r8=%08lX\n", regs->r5, regs->r6, regs->r7, regs->r8); - printk(KERN_INFO " r9=%08lX, r10=%08lX, r11=%08lX, r12=%08lX\n", + pr_info(" r9=%08lX, r10=%08lX, r11=%08lX, r12=%08lX\n", regs->r9, regs->r10, regs->r11, regs->r12); - printk(KERN_INFO " r13=%08lX, r14=%08lX, r15=%08lX, r16=%08lX\n", + pr_info(" r13=%08lX, r14=%08lX, r15=%08lX, r16=%08lX\n", regs->r13, regs->r14, regs->r15, regs->r16); - printk(KERN_INFO " r17=%08lX, r18=%08lX, r19=%08lX, r20=%08lX\n", + pr_info(" r17=%08lX, r18=%08lX, r19=%08lX, r20=%08lX\n", regs->r17, regs->r18, regs->r19, regs->r20); - printk(KERN_INFO " r21=%08lX, r22=%08lX, r23=%08lX, r24=%08lX\n", + pr_info(" r21=%08lX, r22=%08lX, r23=%08lX, r24=%08lX\n", regs->r21, regs->r22, regs->r23, regs->r24); - printk(KERN_INFO " r25=%08lX, r26=%08lX, r27=%08lX, r28=%08lX\n", + pr_info(" r25=%08lX, r26=%08lX, r27=%08lX, r28=%08lX\n", regs->r25, regs->r26, regs->r27, regs->r28); - printk(KERN_INFO " r29=%08lX, r30=%08lX, r31=%08lX, rPC=%08lX\n", + pr_info(" r29=%08lX, r30=%08lX, r31=%08lX, rPC=%08lX\n", regs->r29, regs->r30, regs->r31, regs->pc); - printk(KERN_INFO " msr=%08lX, ear=%08lX, esr=%08lX, fsr=%08lX\n", + pr_info(" msr=%08lX, ear=%08lX, esr=%08lX, fsr=%08lX\n", regs->msr, regs->ear, regs->esr, regs->fsr); } -void (*pm_idle)(void); void (*pm_power_off)(void) = NULL; EXPORT_SYMBOL(pm_power_off); -static int hlt_counter = 1; - -void disable_hlt(void) -{ - hlt_counter++; -} -EXPORT_SYMBOL(disable_hlt); - -void enable_hlt(void) -{ - hlt_counter--; -} -EXPORT_SYMBOL(enable_hlt); - -static int __init nohlt_setup(char *__unused) -{ - hlt_counter = 1; - return 1; -} -__setup("nohlt", nohlt_setup); - -static int __init hlt_setup(char *__unused) -{ - hlt_counter = 0; - return 1; -} -__setup("hlt", hlt_setup); - -void default_idle(void) -{ - if (likely(hlt_counter)) { - local_irq_disable(); - stop_critical_timings(); - cpu_relax(); - start_critical_timings(); - local_irq_enable(); - } else { - clear_thread_flag(TIF_POLLING_NRFLAG); - smp_mb__after_clear_bit(); - local_irq_disable(); - while (!need_resched()) - cpu_sleep(); - local_irq_enable(); - set_thread_flag(TIF_POLLING_NRFLAG); - } -} - -void cpu_idle(void) -{ - set_thread_flag(TIF_POLLING_NRFLAG); - - /* endless idle loop with no priority at all */ - while (1) { - void (*idle)(void) = pm_idle; - - if (!idle) - idle = default_idle; - - tick_nohz_idle_enter(); - rcu_idle_enter(); - while (!need_resched()) - idle(); - rcu_idle_exit(); - tick_nohz_idle_exit(); - - preempt_enable_no_resched(); - schedule(); - preempt_disable(); - check_pgt_cache(); - } -} - void flush_thread(void) { } int copy_thread(unsigned long clone_flags, unsigned long usp, - unsigned long unused, - struct task_struct *p, struct pt_regs *regs) + unsigned long arg, struct task_struct *p) { struct pt_regs *childregs = task_pt_regs(p); struct thread_info *ti = task_thread_info(p); - *childregs = *regs; - if (user_mode(regs)) + if (unlikely(p->flags & PF_KTHREAD)) { + /* if we're creating a new kernel thread then just zeroing all + * the registers. That's OK for a brand new thread.*/ + memset(childregs, 0, sizeof(struct pt_regs)); + memset(&ti->cpu_context, 0, sizeof(struct cpu_context)); + ti->cpu_context.r1 = (unsigned long)childregs; + ti->cpu_context.r20 = (unsigned long)usp; /* fn */ + ti->cpu_context.r19 = (unsigned long)arg; + childregs->pt_mode = 1; + local_save_flags(childregs->msr); +#ifdef CONFIG_MMU + ti->cpu_context.msr = childregs->msr & ~MSR_IE; +#endif + ti->cpu_context.r15 = (unsigned long)ret_from_kernel_thread - 8; + return 0; + } + *childregs = *current_pt_regs(); + if (usp) childregs->r1 = usp; - else - childregs->r1 = ((unsigned long) ti) + THREAD_SIZE; -#ifndef CONFIG_MMU memset(&ti->cpu_context, 0, sizeof(struct cpu_context)); ti->cpu_context.r1 = (unsigned long)childregs; +#ifndef CONFIG_MMU ti->cpu_context.msr = (unsigned long)childregs->msr; #else + childregs->msr |= MSR_UMS; - /* if creating a kernel thread then update the current reg (we don't - * want to use the parent's value when restoring by POP_STATE) */ - if (kernel_mode(regs)) - /* save new current on stack to use POP_STATE */ - childregs->CURRENT_TASK = (unsigned long)p; - /* if returning to user then use the parent's value of this register */ - - /* if we're creating a new kernel thread then just zeroing all - * the registers. That's OK for a brand new thread.*/ - /* Pls. note that some of them will be restored in POP_STATE */ - if (kernel_mode(regs)) - memset(&ti->cpu_context, 0, sizeof(struct cpu_context)); - /* if this thread is created for fork/vfork/clone, then we want to - * restore all the parent's context */ - /* in addition to the registers which will be restored by POP_STATE */ - else { - ti->cpu_context = *(struct cpu_context *)regs; - childregs->msr |= MSR_UMS; - } - - /* FIXME STATE_SAVE_PT_OFFSET; */ - ti->cpu_context.r1 = (unsigned long)childregs; /* we should consider the fact that childregs is a copy of the parent * regs which were saved immediately after entering the kernel state * before enabling VM. This MSR will be restored in switch_to and @@ -172,7 +94,6 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, * excepting for VM and UMS * don't touch UMS , CARRY and cache bits * right now MSR is a copy of parent one */ - childregs->msr |= MSR_BIP; childregs->msr &= ~MSR_EIP; childregs->msr |= MSR_IE; childregs->msr &= ~MSR_VM; @@ -185,8 +106,12 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, #endif ti->cpu_context.r15 = (unsigned long)ret_from_fork - 8; + /* + * r21 is the thread reg, r10 is 6th arg to clone + * which contains TLS area + */ if (clone_flags & CLONE_SETTLS) - ; + childregs->r21 = childregs->r10; return 0; } @@ -208,29 +133,6 @@ unsigned long thread_saved_pc(struct task_struct *tsk) } #endif -static void kernel_thread_helper(int (*fn)(void *), void *arg) -{ - fn(arg); - do_exit(-1); -} - -int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags) -{ - struct pt_regs regs; - - memset(®s, 0, sizeof(regs)); - /* store them in non-volatile registers */ - regs.r5 = (unsigned long)fn; - regs.r6 = (unsigned long)arg; - local_save_flags(regs.msr); - regs.pc = (unsigned long)kernel_thread_helper; - regs.pt_mode = 1; - - return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, - ®s, 0, NULL, NULL); -} -EXPORT_SYMBOL_GPL(kernel_thread); - unsigned long get_wchan(struct task_struct *p) { /* TBD (used by procfs) */ @@ -245,6 +147,7 @@ void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp) regs->pt_mode = 0; #ifdef CONFIG_MMU regs->msr |= MSR_UMS; + regs->msr &= ~MSR_VM; #endif } @@ -258,3 +161,8 @@ int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpregs) return 0; /* MicroBlaze has no separate FPU registers */ } #endif /* CONFIG_MMU */ + +void arch_cpu_idle(void) +{ + local_irq_enable(); +} diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c index 80d314e8190..68f099960eb 100644 --- a/arch/microblaze/kernel/prom.c +++ b/arch/microblaze/kernel/prom.c @@ -14,6 +14,7 @@ */ #include <stdarg.h> +#include <linux/export.h> #include <linux/kernel.h> #include <linux/string.h> #include <linux/init.h> @@ -25,41 +26,30 @@ #include <linux/delay.h> #include <linux/initrd.h> #include <linux/bitops.h> -#include <linux/module.h> #include <linux/kexec.h> #include <linux/debugfs.h> #include <linux/irq.h> #include <linux/memblock.h> +#include <linux/of_fdt.h> #include <asm/prom.h> #include <asm/page.h> #include <asm/processor.h> #include <asm/irq.h> #include <linux/io.h> -#include <asm/system.h> #include <asm/mmu.h> #include <asm/pgtable.h> #include <asm/sections.h> #include <asm/pci-bridge.h> -void __init early_init_dt_add_memory_arch(u64 base, u64 size) -{ - memblock_add(base, size); -} - -void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align) -{ - return __va(memblock_alloc(size, align)); -} - #ifdef CONFIG_EARLY_PRINTK -char *stdout; +static const char *stdout; -int __init early_init_dt_scan_chosen_serial(unsigned long node, +static int __init early_init_dt_scan_chosen_serial(unsigned long node, const char *uname, int depth, void *data) { - unsigned long l; - char *p; + int l; + const char *p; pr_debug("%s: depth: %d, uname: %s\n", __func__, depth, uname); @@ -90,7 +80,7 @@ int __init early_init_dt_scan_chosen_serial(unsigned long node, (strncmp(p, "xlnx,opb-uartlite", 17) == 0) || (strncmp(p, "xlnx,axi-uartlite", 17) == 0) || (strncmp(p, "xlnx,mdm", 8) == 0)) { - unsigned int *addrp; + const unsigned int *addrp; *(u32 *)data = UARTLITE; @@ -112,21 +102,10 @@ void __init early_init_devtree(void *params) { pr_debug(" -> early_init_devtree(%p)\n", params); - /* Setup flat device-tree pointer */ - initial_boot_params = params; - - /* Retrieve various informations from the /chosen node of the - * device-tree, including the platform type, initrd location and - * size, TCE reserve, and more ... - */ - of_scan_flat_dt(early_init_dt_scan_chosen, cmd_line); + early_init_dt_scan(params); + if (!strlen(boot_command_line)) + strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE); - /* Scan memory nodes and rebuild MEMBLOCKs */ - of_scan_flat_dt(early_init_dt_scan_root, NULL); - of_scan_flat_dt(early_init_dt_scan_memory, NULL); - - /* Save command line for /proc/cmdline and then parse parameters */ - strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE); parse_early_param(); memblock_allow_resize(); @@ -135,44 +114,3 @@ void __init early_init_devtree(void *params) pr_debug(" <- early_init_devtree()\n"); } - -#ifdef CONFIG_BLK_DEV_INITRD -void __init early_init_dt_setup_initrd_arch(unsigned long start, - unsigned long end) -{ - initrd_start = (unsigned long)__va(start); - initrd_end = (unsigned long)__va(end); - initrd_below_start_ok = 1; -} -#endif - -/******* - * - * New implementation of the OF "find" APIs, return a refcounted - * object, call of_node_put() when done. The device tree and list - * are protected by a rw_lock. - * - * Note that property management will need some locking as well, - * this isn't dealt with yet. - * - *******/ - -#if defined(CONFIG_DEBUG_FS) && defined(DEBUG) -static struct debugfs_blob_wrapper flat_dt_blob; - -static int __init export_flat_device_tree(void) -{ - struct dentry *d; - - flat_dt_blob.data = initial_boot_params; - flat_dt_blob.size = initial_boot_params->totalsize; - - d = debugfs_create_blob("flat-device-tree", S_IFREG | S_IRUSR, - of_debugfs_root, &flat_dt_blob); - if (!d) - return 1; - - return 0; -} -device_initcall(export_flat_device_tree); -#endif diff --git a/arch/microblaze/kernel/prom_parse.c b/arch/microblaze/kernel/prom_parse.c index 47187cc2cf0..068762f55fd 100644 --- a/arch/microblaze/kernel/prom_parse.c +++ b/arch/microblaze/kernel/prom_parse.c @@ -1,8 +1,8 @@ #undef DEBUG +#include <linux/export.h> #include <linux/kernel.h> #include <linux/string.h> -#include <linux/module.h> #include <linux/ioport.h> #include <linux/etherdevice.h> #include <linux/of_address.h> diff --git a/arch/microblaze/kernel/ptrace.c b/arch/microblaze/kernel/ptrace.c index 6eb2aa927d8..39cf50841f6 100644 --- a/arch/microblaze/kernel/ptrace.c +++ b/arch/microblaze/kernel/ptrace.c @@ -40,7 +40,7 @@ #include <asm/asm-offsets.h> #include <asm/cacheflush.h> #include <asm/syscall.h> -#include <asm/io.h> +#include <linux/io.h> /* Returns the address where the register at REG_OFFS in P is stashed away. */ static microblaze_reg_t *reg_save_addr(unsigned reg_offs, @@ -136,7 +136,7 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs) { long ret = 0; - secure_computing(regs->r12); + secure_computing_strict(regs->r12); if (test_thread_flag(TIF_SYSCALL_TRACE) && tracehook_report_syscall_entry(regs)) @@ -164,29 +164,6 @@ asmlinkage void do_syscall_trace_leave(struct pt_regs *regs) tracehook_report_syscall_exit(regs, step); } -#if 0 -static asmlinkage void syscall_trace(void) -{ - if (!test_thread_flag(TIF_SYSCALL_TRACE)) - return; - if (!(current->ptrace & PT_PTRACED)) - return; - /* The 0x80 provides a way for the tracing parent to distinguish - between a syscall stop and SIGTRAP delivery */ - ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) - ? 0x80 : 0)); - /* - * this isn't the same as continuing with a signal, but it will do - * for normal use. strace only continues with a signal if the - * stopping signal is not SIGTRAP. -brl - */ - if (current->exit_code) { - send_sig(current->exit_code, current, 1); - current->exit_code = 0; - } -} -#endif - void ptrace_disable(struct task_struct *child) { /* nothing to do */ diff --git a/arch/microblaze/kernel/reset.c b/arch/microblaze/kernel/reset.c index 88a01636f78..fbe58c6554a 100644 --- a/arch/microblaze/kernel/reset.c +++ b/arch/microblaze/kernel/reset.c @@ -26,13 +26,14 @@ void of_platform_reset_gpio_probe(void) "hard-reset-gpios", 0); if (!gpio_is_valid(handle)) { - printk(KERN_INFO "Skipping unavailable RESET gpio %d (%s)\n", + pr_info("Skipping unavailable RESET gpio %d (%s)\n", handle, "reset"); + return; } ret = gpio_request(handle, "reset"); if (ret < 0) { - printk(KERN_INFO "GPIO pin is already allocated\n"); + pr_info("GPIO pin is already allocated\n"); return; } @@ -49,7 +50,7 @@ void of_platform_reset_gpio_probe(void) /* Setup output direction */ gpio_set_value(handle, 0); - printk(KERN_INFO "RESET: Registered gpio device: %d, current val: %d\n", + pr_info("RESET: Registered gpio device: %d, current val: %d\n", handle, reset_val); return; err: @@ -60,10 +61,17 @@ err: static void gpio_system_reset(void) { - gpio_set_value(handle, 1 - reset_val); + if (gpio_is_valid(handle)) + gpio_set_value(handle, 1 - reset_val); + else + pr_notice("Reset GPIO unavailable - halting!\n"); } #else -#define gpio_system_reset() do {} while (0) +static void gpio_system_reset(void) +{ + pr_notice("No reset GPIO present - halting!\n"); +} + void of_platform_reset_gpio_probe(void) { return; @@ -72,30 +80,29 @@ void of_platform_reset_gpio_probe(void) void machine_restart(char *cmd) { - printk(KERN_NOTICE "Machine restart...\n"); + pr_notice("Machine restart...\n"); gpio_system_reset(); - dump_stack(); while (1) ; } void machine_shutdown(void) { - printk(KERN_NOTICE "Machine shutdown...\n"); + pr_notice("Machine shutdown...\n"); while (1) ; } void machine_halt(void) { - printk(KERN_NOTICE "Machine halt...\n"); + pr_notice("Machine halt...\n"); while (1) ; } void machine_power_off(void) { - printk(KERN_NOTICE "Machine power off...\n"); + pr_notice("Machine power off...\n"); while (1) ; } diff --git a/arch/microblaze/kernel/selfmod.c b/arch/microblaze/kernel/selfmod.c deleted file mode 100644 index 89508bdc9f3..00000000000 --- a/arch/microblaze/kernel/selfmod.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu> - * Copyright (C) 2009 PetaLogix - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include <linux/interrupt.h> -#include <asm/selfmod.h> - -#undef DEBUG - -#if __GNUC__ > 3 -#error GCC 4 unsupported SELFMOD. Please disable SELFMOD from menuconfig. -#endif - -#define OPCODE_IMM 0xB0000000 -#define OPCODE_LWI 0xE8000000 -#define OPCODE_LWI_MASK 0xEC000000 -#define OPCODE_RTSD 0xB60F0008 /* return from func: rtsd r15, 8 */ -#define OPCODE_ADDIK 0x30000000 -#define OPCODE_ADDIK_MASK 0xFC000000 - -#define IMM_BASE (OPCODE_IMM | (BARRIER_BASE_ADDR >> 16)) -#define LWI_BASE (OPCODE_LWI | (BARRIER_BASE_ADDR & 0x0000ff00)) -#define LWI_BASE_MASK (OPCODE_LWI_MASK | (BARRIER_BASE_ADDR & 0x0000ff00)) -#define ADDIK_BASE (OPCODE_ADDIK | (BARRIER_BASE_ADDR & 0x0000ff00)) -#define ADDIK_BASE_MASK (OPCODE_ADDIK_MASK | (BARRIER_BASE_ADDR & 0x0000ff00)) - -#define MODIFY_INSTR { \ - pr_debug("%s: curr instr, (%d):0x%x, next(%d):0x%x\n", \ - __func__, i, addr[i], i + 1, addr[i + 1]); \ - addr[i] = OPCODE_IMM + (base >> 16); \ - /* keep instruction opcode and add only last 16bits */ \ - addr[i + 1] = (addr[i + 1] & 0xffff00ff) + (base & 0xffff); \ - __invalidate_icache(addr[i]); \ - __invalidate_icache(addr[i + 1]); \ - pr_debug("%s: hack instr, (%d):0x%x, next(%d):0x%x\n", \ - __func__, i, addr[i], i + 1, addr[i + 1]); } - -/* NOTE - * self-modified part of code for improvement of interrupt controller - * save instruction in interrupt rutine - */ -void selfmod_function(const int *arr_fce, const unsigned int base) -{ - unsigned int flags, i, j, *addr = NULL; - - local_irq_save(flags); - __disable_icache(); - - /* zero terminated array */ - for (j = 0; arr_fce[j] != 0; j++) { - /* get start address of function */ - addr = (unsigned int *) arr_fce[j]; - pr_debug("%s: func(%d) at 0x%x\n", - __func__, j, (unsigned int) addr); - for (i = 0; ; i++) { - pr_debug("%s: instruction code at %d: 0x%x\n", - __func__, i, addr[i]); - if (addr[i] == IMM_BASE) { - /* detecting of lwi (0xE8) or swi (0xF8) instr - * I can detect both opcode with one mask */ - if ((addr[i + 1] & LWI_BASE_MASK) == LWI_BASE) { - MODIFY_INSTR; - } else /* detection addik for ack */ - if ((addr[i + 1] & ADDIK_BASE_MASK) == - ADDIK_BASE) { - MODIFY_INSTR; - } - } else if (addr[i] == OPCODE_RTSD) { - /* return from function means end of function */ - pr_debug("%s: end of array %d\n", __func__, i); - break; - } - } - } - local_irq_restore(flags); -} /* end of self-modified code */ diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c index 604cd9dd133..ab5b488e1fd 100644 --- a/arch/microblaze/kernel/setup.c +++ b/arch/microblaze/kernel/setup.c @@ -9,12 +9,15 @@ */ #include <linux/init.h> +#include <linux/clk-provider.h> +#include <linux/clocksource.h> #include <linux/string.h> #include <linux/seq_file.h> #include <linux/cpu.h> #include <linux/initrd.h> #include <linux/console.h> #include <linux/debugfs.h> +#include <linux/of_fdt.h> #include <asm/setup.h> #include <asm/sections.h> @@ -30,7 +33,6 @@ #include <asm/entry.h> #include <asm/cpuinfo.h> -#include <asm/system.h> #include <asm/prom.h> #include <asm/pgtable.h> @@ -41,18 +43,21 @@ DEFINE_PER_CPU(unsigned int, R11_SAVE); /* Temp variable for entry */ DEFINE_PER_CPU(unsigned int, CURRENT_SAVE); /* Saved current pointer */ unsigned int boot_cpuid; -char cmd_line[COMMAND_LINE_SIZE]; +/* + * Placed cmd_line to .data section because can be initialized from + * ASM code. Default position is BSS section which is cleared + * in machine_early_init(). + */ +char cmd_line[COMMAND_LINE_SIZE] __attribute__ ((section(".data"))); void __init setup_arch(char **cmdline_p) { - *cmdline_p = cmd_line; + *cmdline_p = boot_command_line; console_verbose(); unflatten_device_tree(); - /* NOTE I think that this function is not necessary to call */ - /* irq_early_init(); */ setup_cpuinfo(); microblaze_cache_init(); @@ -66,17 +71,9 @@ void __init setup_arch(char **cmdline_p) xilinx_pci_init(); -#if defined(CONFIG_SELFMOD_INTC) || defined(CONFIG_SELFMOD_TIMER) - printk(KERN_NOTICE "Self modified code enable\n"); -#endif - -#ifdef CONFIG_VT -#if defined(CONFIG_XILINX_CONSOLE) - conswitchp = &xil_con; -#elif defined(CONFIG_DUMMY_CONSOLE) +#if defined(CONFIG_DUMMY_CONSOLE) conswitchp = &dummy_con; #endif -#endif } #ifdef CONFIG_MTD_UCLINUX @@ -97,8 +94,11 @@ inline unsigned get_romfs_len(unsigned *addr) } #endif /* CONFIG_MTD_UCLINUX_EBSS */ +unsigned long kernel_tlb; + void __init machine_early_init(const char *cmdline, unsigned int ram, - unsigned int fdt, unsigned int msr) + unsigned int fdt, unsigned int msr, unsigned int tlb0, + unsigned int tlb1) { unsigned long *src, *dst; unsigned int offset = 0; @@ -121,7 +121,7 @@ void __init machine_early_init(const char *cmdline, unsigned int ram, /* Move ROMFS out of BSS before clearing it */ if (romfs_size > 0) { - memmove(&_ebss, (int *)romfs_base, romfs_size); + memmove(&__bss_stop, (int *)romfs_base, romfs_size); klimit += romfs_size; } #endif @@ -130,48 +130,49 @@ void __init machine_early_init(const char *cmdline, unsigned int ram, memset(__bss_start, 0, __bss_stop-__bss_start); memset(_ssbss, 0, _esbss-_ssbss); - /* Copy command line passed from bootloader */ -#ifndef CONFIG_CMDLINE_BOOL - if (cmdline && cmdline[0] != '\0') - strlcpy(cmd_line, cmdline, COMMAND_LINE_SIZE); -#endif - lockdep_init(); /* initialize device tree for usage in early_printk */ - early_init_devtree((void *)_fdt_start); + early_init_devtree(_fdt_start); #ifdef CONFIG_EARLY_PRINTK setup_early_printk(NULL); #endif - printk("Ramdisk addr 0x%08x, ", ram); + /* setup kernel_tlb after BSS cleaning + * Maybe worth to move to asm code */ + kernel_tlb = tlb0 + tlb1; + /* printk("TLB1 0x%08x, TLB0 0x%08x, tlb 0x%x\n", tlb0, + tlb1, kernel_tlb); */ + + pr_info("Ramdisk addr 0x%08x, ", ram); if (fdt) - printk("FDT at 0x%08x\n", fdt); + pr_info("FDT at 0x%08x\n", fdt); else - printk("Compiled-in FDT at 0x%08x\n", - (unsigned int)_fdt_start); + pr_info("Compiled-in FDT at %p\n", _fdt_start); #ifdef CONFIG_MTD_UCLINUX - printk("Found romfs @ 0x%08x (0x%08x)\n", + pr_info("Found romfs @ 0x%08x (0x%08x)\n", romfs_base, romfs_size); - printk("#### klimit %p ####\n", old_klimit); + pr_info("#### klimit %p ####\n", old_klimit); BUG_ON(romfs_size < 0); /* What else can we do? */ - printk("Moved 0x%08x bytes from 0x%08x to 0x%08x\n", - romfs_size, romfs_base, (unsigned)&_ebss); + pr_info("Moved 0x%08x bytes from 0x%08x to 0x%08x\n", + romfs_size, romfs_base, (unsigned)&__bss_stop); - printk("New klimit: 0x%08x\n", (unsigned)klimit); + pr_info("New klimit: 0x%08x\n", (unsigned)klimit); #endif #if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR - if (msr) - printk("!!!Your kernel has setup MSR instruction but " - "CPU don't have it %x\n", msr); + if (msr) { + pr_info("!!!Your kernel has setup MSR instruction but "); + pr_cont("CPU don't have it %x\n", msr); + } #else - if (!msr) - printk("!!!Your kernel not setup MSR instruction but " - "CPU have it %x\n", msr); + if (!msr) { + pr_info("!!!Your kernel not setup MSR instruction but "); + pr_cont("CPU have it %x\n", msr); + } #endif /* Do not copy reset vectors. offset = 0x2 means skip the first @@ -189,6 +190,13 @@ void __init machine_early_init(const char *cmdline, unsigned int ram, per_cpu(CURRENT_SAVE, 0) = (unsigned long)current; } +void __init time_init(void) +{ + of_clk_init(NULL); + setup_cpuinfo_clk(); + clocksource_of_init(); +} + #ifdef CONFIG_DEBUG_FS struct dentry *of_debugfs_root; @@ -199,32 +207,21 @@ static int microblaze_debugfs_init(void) return of_debugfs_root == NULL; } arch_initcall(microblaze_debugfs_init); -#endif -static int dflt_bus_notify(struct notifier_block *nb, - unsigned long action, void *data) +# ifdef CONFIG_MMU +static int __init debugfs_tlb(void) { - struct device *dev = data; - - /* We are only intereted in device addition */ - if (action != BUS_NOTIFY_ADD_DEVICE) - return 0; + struct dentry *d; - set_dma_ops(dev, &dma_direct_ops); + if (!of_debugfs_root) + return -ENODEV; - return NOTIFY_DONE; -} - -static struct notifier_block dflt_plat_bus_notifier = { - .notifier_call = dflt_bus_notify, - .priority = INT_MAX, -}; - -static int __init setup_bus_notifier(void) -{ - bus_register_notifier(&platform_bus_type, &dflt_plat_bus_notifier); + d = debugfs_create_u32("tlb_skip", S_IRUGO, of_debugfs_root, &tlb_skip); + if (!d) + return -ENOMEM; return 0; } - -arch_initcall(setup_bus_notifier); +device_initcall(debugfs_tlb); +# endif +#endif diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c index 59967116898..49a07a4d76d 100644 --- a/arch/microblaze/kernel/signal.c +++ b/arch/microblaze/kernel/signal.c @@ -31,6 +31,7 @@ #include <linux/personality.h> #include <linux/percpu.h> #include <linux/linkage.h> +#include <linux/tracehook.h> #include <asm/entry.h> #include <asm/ucontext.h> #include <linux/uaccess.h> @@ -40,17 +41,6 @@ #include <asm/cacheflush.h> #include <asm/syscalls.h> -#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) - -asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset, int in_sycall); - -asmlinkage long -sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, - struct pt_regs *regs) -{ - return do_sigaltstack(uss, uoss, regs->r1); -} - /* * Do a signal return; undo the signal stack. */ @@ -98,24 +88,21 @@ asmlinkage long sys_rt_sigreturn(struct pt_regs *regs) sigset_t set; int rval; + /* Always make any pending restarted system calls return -EINTR */ + current_thread_info()->restart_block.fn = do_no_restart_syscall; + if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) goto badframe; if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) goto badframe; - sigdelsetmask(&set, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); - current->blocked = set; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + set_current_blocked(&set); if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &rval)) goto badframe; - /* It is more difficult to avoid calling this function than to - call it and ignore errors. */ - if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->r1)) + if (restore_altstack(&frame->uc.uc_stack)) goto badframe; return rval; @@ -169,7 +156,7 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size) return (void __user *)((sp - frame_size) & -8UL); } -static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, +static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *set, struct pt_regs *regs) { struct rt_sigframe __user *frame; @@ -198,11 +185,7 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, /* Create the ucontext. */ err |= __put_user(0, &frame->uc.uc_flags); err |= __put_user(NULL, &frame->uc.uc_link); - err |= __put_user((void __user *)current->sas_ss_sp, - &frame->uc.uc_stack.ss_sp); - err |= __put_user(sas_ss_flags(regs->r1), - &frame->uc.uc_stack.ss_flags); - err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size); + err |= __save_altstack(&frame->uc.uc_stack, regs->r1); err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, set->sig[0]); err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); @@ -233,7 +216,7 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, /* MS: I need add offset in page */ address += ((unsigned long)frame->tramp) & ~PAGE_MASK; /* MS address is virtual */ - address = virt_to_phys(address); + address = __virt_to_phys(address); invalidate_icache_range(address, address + 8); flush_dcache_range(address, address + 8); } @@ -258,21 +241,16 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, set_fs(USER_DS); - /* the tracer may want to single-step inside the handler */ - if (test_thread_flag(TIF_SINGLESTEP)) - ptrace_notify(SIGTRAP); - #ifdef DEBUG_SIG - printk(KERN_INFO "SIG deliver (%s:%d): sp=%p pc=%08lx\n", + pr_info("SIG deliver (%s:%d): sp=%p pc=%08lx\n", current->comm, current->pid, frame, regs->pc); #endif - return; + return 0; give_sigsegv: - if (sig == SIGSEGV) - ka->sa.sa_handler = SIG_DFL; - force_sig(SIGSEGV, current); + force_sigsegv(sig, current); + return -EFAULT; } /* Handle restarting system calls */ @@ -295,15 +273,7 @@ handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler) case -ERESTARTNOINTR: do_restart: /* offset of 4 bytes to re-execute trap (brki) instruction */ -#ifndef CONFIG_MMU regs->pc -= 4; -#else - /* offset of 8 bytes required = 4 for rtbd - offset, plus 4 for size of - "brki r14,8" - instruction. */ - regs->pc -= 8; -#endif break; } } @@ -312,28 +282,24 @@ do_restart: * OK, we're invoking a handler */ -static int +static void handle_signal(unsigned long sig, struct k_sigaction *ka, - siginfo_t *info, sigset_t *oldset, struct pt_regs *regs) + siginfo_t *info, struct pt_regs *regs) { + sigset_t *oldset = sigmask_to_save(); + int ret; + /* Set up the stack frame */ if (ka->sa.sa_flags & SA_SIGINFO) - setup_rt_frame(sig, ka, info, oldset, regs); + ret = setup_rt_frame(sig, ka, info, oldset, regs); else - setup_rt_frame(sig, ka, NULL, oldset, regs); - - if (ka->sa.sa_flags & SA_ONESHOT) - ka->sa.sa_handler = SIG_DFL; - - if (!(ka->sa.sa_flags & SA_NODEFER)) { - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked, - ¤t->blocked, &ka->sa.sa_mask); - sigaddset(¤t->blocked, sig); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - } - return 1; + ret = setup_rt_frame(sig, ka, NULL, oldset, regs); + + if (ret) + return; + + signal_delivered(sig, info, ka, regs, + test_thread_flag(TIF_SINGLESTEP)); } /* @@ -345,46 +311,24 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, * the kernel can handle, and then we build all the user-level signal handling * stack-frames in one go after that. */ -int do_signal(struct pt_regs *regs, sigset_t *oldset, int in_syscall) +static void do_signal(struct pt_regs *regs, int in_syscall) { siginfo_t info; int signr; struct k_sigaction ka; #ifdef DEBUG_SIG - printk(KERN_INFO "do signal: %p %p %d\n", regs, oldset, in_syscall); - printk(KERN_INFO "do signal2: %lx %lx %ld [%lx]\n", regs->pc, regs->r1, + pr_info("do signal: %p %d\n", regs, in_syscall); + pr_info("do signal2: %lx %lx %ld [%lx]\n", regs->pc, regs->r1, regs->r12, current_thread_info()->flags); #endif - /* - * We want the common case to go fast, which - * is why we may in certain cases get here from - * kernel mode. Just return without doing anything - * if so. - */ - if (kernel_mode(regs)) - return 1; - - if (current_thread_info()->status & TS_RESTORE_SIGMASK) - oldset = ¤t->saved_sigmask; - else - oldset = ¤t->blocked; signr = get_signal_to_deliver(&info, &ka, regs, NULL); if (signr > 0) { /* Whee! Actually deliver the signal. */ if (in_syscall) handle_restart(regs, &ka, 1); - if (handle_signal(signr, &ka, &info, oldset, regs)) { - /* - * A signal was successfully delivered; the saved - * sigmask will have been stored in the signal frame, - * and will be restored by sigreturn, so we can simply - * clear the TS_RESTORE_SIGMASK flag. - */ - current_thread_info()->status &= - ~TS_RESTORE_SIGMASK; - } - return 1; + handle_signal(signr, &ka, &info, regs); + return; } if (in_syscall) @@ -394,11 +338,14 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset, int in_syscall) * If there's no signal to deliver, we just put the saved sigmask * back. */ - if (current_thread_info()->status & TS_RESTORE_SIGMASK) { - current_thread_info()->status &= ~TS_RESTORE_SIGMASK; - sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); - } + restore_saved_sigmask(); +} - /* Did we come from a system call? */ - return 0; +asmlinkage void do_notify_resume(struct pt_regs *regs, int in_syscall) +{ + if (test_thread_flag(TIF_SIGPENDING)) + do_signal(regs, in_syscall); + + if (test_and_clear_thread_flag(TIF_NOTIFY_RESUME)) + tracehook_notify_resume(regs); } diff --git a/arch/microblaze/kernel/stacktrace.c b/arch/microblaze/kernel/stacktrace.c index 84bc6686102..b4debe283a7 100644 --- a/arch/microblaze/kernel/stacktrace.c +++ b/arch/microblaze/kernel/stacktrace.c @@ -9,11 +9,11 @@ * for more details. */ +#include <linux/export.h> #include <linux/sched.h> #include <linux/stacktrace.h> #include <linux/thread_info.h> #include <linux/ptrace.h> -#include <linux/module.h> #include <asm/unwind.h> void save_stack_trace(struct stack_trace *trace) diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c index e5b154f24f8..f1e1f666ddd 100644 --- a/arch/microblaze/kernel/sys_microblaze.c +++ b/arch/microblaze/kernel/sys_microblaze.c @@ -13,6 +13,7 @@ */ #include <linux/errno.h> +#include <linux/export.h> #include <linux/mm.h> #include <linux/smp.h> #include <linux/syscalls.h> @@ -24,51 +25,17 @@ #include <linux/sys.h> #include <linux/ipc.h> #include <linux/file.h> -#include <linux/module.h> #include <linux/err.h> #include <linux/fs.h> #include <linux/semaphore.h> #include <linux/uaccess.h> #include <linux/unistd.h> #include <linux/slab.h> - #include <asm/syscalls.h> -asmlinkage long microblaze_vfork(struct pt_regs *regs) -{ - return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->r1, - regs, 0, NULL, NULL); -} - -asmlinkage long microblaze_clone(int flags, unsigned long stack, - struct pt_regs *regs) -{ - if (!stack) - stack = regs->r1; - return do_fork(flags, stack, regs, 0, NULL, NULL); -} - -asmlinkage long microblaze_execve(const char __user *filenamei, - const char __user *const __user *argv, - const char __user *const __user *envp, - struct pt_regs *regs) -{ - int error; - char *filename; - - filename = getname(filenamei); - error = PTR_ERR(filename); - if (IS_ERR(filename)) - goto out; - error = do_execve(filename, argv, envp, regs); - putname(filename); -out: - return error; -} - -asmlinkage long sys_mmap(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, off_t pgoff) +SYSCALL_DEFINE6(mmap, unsigned long, addr, unsigned long, len, + unsigned long, prot, unsigned long, flags, unsigned long, fd, + off_t, pgoff) { if (pgoff & ~PAGE_MASK) return -EINVAL; @@ -76,23 +43,13 @@ asmlinkage long sys_mmap(unsigned long addr, unsigned long len, return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff >> PAGE_SHIFT); } -/* - * Do a system call from kernel instead of calling sys_execve so we - * end up with proper pt_regs. - */ -int kernel_execve(const char *filename, - const char *const argv[], - const char *const envp[]) +SYSCALL_DEFINE6(mmap2, unsigned long, addr, unsigned long, len, + unsigned long, prot, unsigned long, flags, unsigned long, fd, + unsigned long, pgoff) { - register const char *__a __asm__("r5") = filename; - register const void *__b __asm__("r6") = argv; - register const void *__c __asm__("r7") = envp; - register unsigned long __syscall __asm__("r12") = __NR_execve; - register unsigned long __ret __asm__("r3"); - __asm__ __volatile__ ("brki r14, 0x8" - : "=r" (__ret), "=r" (__syscall) - : "1" (__syscall), "r" (__a), "r" (__b), "r" (__c) - : "r4", "r8", "r9", - "r10", "r11", "r14", "cc", "memory"); - return __ret; + if (pgoff & (~PAGE_MASK >> 12)) + return -EINVAL; + + return sys_mmap_pgoff(addr, len, prot, flags, fd, + pgoff >> (PAGE_SHIFT - 12)); } diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S index 6a2b294ef6d..329dfbad810 100644 --- a/arch/microblaze/kernel/syscall_table.S +++ b/arch/microblaze/kernel/syscall_table.S @@ -2,11 +2,7 @@ ENTRY(sys_call_table) .long sys_restart_syscall /* 0 - old "setup()" system call, * used for restarting */ .long sys_exit -#ifdef CONFIG_MMU - .long sys_fork_wrapper -#else - .long sys_ni_syscall -#endif + .long sys_fork .long sys_read .long sys_write .long sys_open /* 5 */ @@ -196,7 +192,7 @@ ENTRY(sys_call_table) .long sys_ni_syscall /* reserved for streams2 */ .long sys_vfork /* 190 */ .long sys_getrlimit - .long sys_mmap_pgoff /* mmap2 */ + .long sys_mmap2 .long sys_truncate64 .long sys_ftruncate64 .long sys_stat64 /* 195 */ @@ -312,7 +308,7 @@ ENTRY(sys_call_table) .long sys_readlinkat /* 305 */ .long sys_fchmodat .long sys_faccessat - .long sys_ni_syscall /* pselect6 */ + .long sys_pselect6 .long sys_ppoll .long sys_unshare /* 310 */ .long sys_set_robust_list @@ -367,8 +363,8 @@ ENTRY(sys_call_table) .long sys_sendmsg /* 360 */ .long sys_recvmsg .long sys_accept4 - .long sys_ni_syscall - .long sys_ni_syscall + .long sys_preadv + .long sys_pwritev .long sys_rt_tgsigqueueinfo /* 365 */ .long sys_perf_event_open .long sys_recvmmsg @@ -383,3 +379,7 @@ ENTRY(sys_call_table) .long sys_sendmmsg .long sys_process_vm_readv .long sys_process_vm_writev + .long sys_kcmp + .long sys_finit_module + .long sys_sched_setattr + .long sys_sched_getattr diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c index 3cb0bf64013..dd96f0e4bfa 100644 --- a/arch/microblaze/kernel/timer.c +++ b/arch/microblaze/kernel/timer.c @@ -1,5 +1,6 @@ /* - * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu> + * Copyright (C) 2007-2013 Michal Simek <monstr@monstr.eu> + * Copyright (C) 2012-2013 Xilinx, Inc. * Copyright (C) 2007-2009 PetaLogix * Copyright (C) 2006 Atmark Techno, Inc. * @@ -8,35 +9,17 @@ * for more details. */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/param.h> #include <linux/interrupt.h> -#include <linux/profile.h> -#include <linux/irq.h> #include <linux/delay.h> #include <linux/sched.h> -#include <linux/spinlock.h> -#include <linux/err.h> +#include <linux/sched_clock.h> #include <linux/clk.h> -#include <linux/clocksource.h> #include <linux/clockchips.h> -#include <linux/io.h> -#include <linux/bug.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <asm/cpuinfo.h> -#include <asm/setup.h> -#include <asm/prom.h> -#include <asm/irq.h> -#include <asm/system.h> -#include <linux/cnt32_to_63.h> - -#ifdef CONFIG_SELFMOD_TIMER -#include <asm/selfmod.h> -#define TIMER_BASE BARRIER_BASE_ADDR -#else -static unsigned int timer_baseaddr; -#define TIMER_BASE timer_baseaddr -#endif + +static void __iomem *timer_baseaddr; static unsigned int freq_div_hz; static unsigned int timer_clock_freq; @@ -60,26 +43,51 @@ static unsigned int timer_clock_freq; #define TCSR_PWMA (1<<9) #define TCSR_ENALL (1<<10) -static inline void microblaze_timer0_stop(void) +static unsigned int (*read_fn)(void __iomem *); +static void (*write_fn)(u32, void __iomem *); + +static void timer_write32(u32 val, void __iomem *addr) +{ + iowrite32(val, addr); +} + +static unsigned int timer_read32(void __iomem *addr) { - out_be32(TIMER_BASE + TCSR0, in_be32(TIMER_BASE + TCSR0) & ~TCSR_ENT); + return ioread32(addr); } -static inline void microblaze_timer0_start_periodic(unsigned long load_val) +static void timer_write32_be(u32 val, void __iomem *addr) +{ + iowrite32be(val, addr); +} + +static unsigned int timer_read32_be(void __iomem *addr) +{ + return ioread32be(addr); +} + +static inline void xilinx_timer0_stop(void) +{ + write_fn(read_fn(timer_baseaddr + TCSR0) & ~TCSR_ENT, + timer_baseaddr + TCSR0); +} + +static inline void xilinx_timer0_start_periodic(unsigned long load_val) { if (!load_val) load_val = 1; - out_be32(TIMER_BASE + TLR0, load_val); /* loading value to timer reg */ + /* loading value to timer reg */ + write_fn(load_val, timer_baseaddr + TLR0); /* load the initial value */ - out_be32(TIMER_BASE + TCSR0, TCSR_LOAD); + write_fn(TCSR_LOAD, timer_baseaddr + TCSR0); /* see timer data sheet for detail * !ENALL - don't enable 'em all * !PWMA - disable pwm * TINT - clear interrupt status * ENT- enable timer itself - * EINT - enable interrupt + * ENIT - enable interrupt * !LOAD - clear the bit to let go * ARHT - auto reload * !CAPT - no external trigger @@ -87,74 +95,75 @@ static inline void microblaze_timer0_start_periodic(unsigned long load_val) * UDT - set the timer as down counter * !MDT0 - generate mode */ - out_be32(TIMER_BASE + TCSR0, - TCSR_TINT|TCSR_ENIT|TCSR_ENT|TCSR_ARHT|TCSR_UDT); + write_fn(TCSR_TINT|TCSR_ENIT|TCSR_ENT|TCSR_ARHT|TCSR_UDT, + timer_baseaddr + TCSR0); } -static inline void microblaze_timer0_start_oneshot(unsigned long load_val) +static inline void xilinx_timer0_start_oneshot(unsigned long load_val) { if (!load_val) load_val = 1; - out_be32(TIMER_BASE + TLR0, load_val); /* loading value to timer reg */ + /* loading value to timer reg */ + write_fn(load_val, timer_baseaddr + TLR0); /* load the initial value */ - out_be32(TIMER_BASE + TCSR0, TCSR_LOAD); + write_fn(TCSR_LOAD, timer_baseaddr + TCSR0); - out_be32(TIMER_BASE + TCSR0, - TCSR_TINT|TCSR_ENIT|TCSR_ENT|TCSR_ARHT|TCSR_UDT); + write_fn(TCSR_TINT|TCSR_ENIT|TCSR_ENT|TCSR_ARHT|TCSR_UDT, + timer_baseaddr + TCSR0); } -static int microblaze_timer_set_next_event(unsigned long delta, +static int xilinx_timer_set_next_event(unsigned long delta, struct clock_event_device *dev) { pr_debug("%s: next event, delta %x\n", __func__, (u32)delta); - microblaze_timer0_start_oneshot(delta); + xilinx_timer0_start_oneshot(delta); return 0; } -static void microblaze_timer_set_mode(enum clock_event_mode mode, +static void xilinx_timer_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) { switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - printk(KERN_INFO "%s: periodic\n", __func__); - microblaze_timer0_start_periodic(freq_div_hz); + pr_info("%s: periodic\n", __func__); + xilinx_timer0_start_periodic(freq_div_hz); break; case CLOCK_EVT_MODE_ONESHOT: - printk(KERN_INFO "%s: oneshot\n", __func__); + pr_info("%s: oneshot\n", __func__); break; case CLOCK_EVT_MODE_UNUSED: - printk(KERN_INFO "%s: unused\n", __func__); + pr_info("%s: unused\n", __func__); break; case CLOCK_EVT_MODE_SHUTDOWN: - printk(KERN_INFO "%s: shutdown\n", __func__); - microblaze_timer0_stop(); + pr_info("%s: shutdown\n", __func__); + xilinx_timer0_stop(); break; case CLOCK_EVT_MODE_RESUME: - printk(KERN_INFO "%s: resume\n", __func__); + pr_info("%s: resume\n", __func__); break; } } -static struct clock_event_device clockevent_microblaze_timer = { - .name = "microblaze_clockevent", +static struct clock_event_device clockevent_xilinx_timer = { + .name = "xilinx_clockevent", .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC, .shift = 8, .rating = 300, - .set_next_event = microblaze_timer_set_next_event, - .set_mode = microblaze_timer_set_mode, + .set_next_event = xilinx_timer_set_next_event, + .set_mode = xilinx_timer_set_mode, }; static inline void timer_ack(void) { - out_be32(TIMER_BASE + TCSR0, in_be32(TIMER_BASE + TCSR0)); + write_fn(read_fn(timer_baseaddr + TCSR0), timer_baseaddr + TCSR0); } static irqreturn_t timer_interrupt(int irq, void *dev_id) { - struct clock_event_device *evt = &clockevent_microblaze_timer; + struct clock_event_device *evt = &clockevent_xilinx_timer; #ifdef CONFIG_HEART_BEAT - heartbeat(); + microblaze_heartbeat(); #endif timer_ack(); evt->event_handler(evt); @@ -163,145 +172,147 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id) static struct irqaction timer_irqaction = { .handler = timer_interrupt, - .flags = IRQF_DISABLED | IRQF_TIMER, + .flags = IRQF_TIMER, .name = "timer", - .dev_id = &clockevent_microblaze_timer, + .dev_id = &clockevent_xilinx_timer, }; -static __init void microblaze_clockevent_init(void) +static __init void xilinx_clockevent_init(void) { - clockevent_microblaze_timer.mult = + clockevent_xilinx_timer.mult = div_sc(timer_clock_freq, NSEC_PER_SEC, - clockevent_microblaze_timer.shift); - clockevent_microblaze_timer.max_delta_ns = - clockevent_delta2ns((u32)~0, &clockevent_microblaze_timer); - clockevent_microblaze_timer.min_delta_ns = - clockevent_delta2ns(1, &clockevent_microblaze_timer); - clockevent_microblaze_timer.cpumask = cpumask_of(0); - clockevents_register_device(&clockevent_microblaze_timer); + clockevent_xilinx_timer.shift); + clockevent_xilinx_timer.max_delta_ns = + clockevent_delta2ns((u32)~0, &clockevent_xilinx_timer); + clockevent_xilinx_timer.min_delta_ns = + clockevent_delta2ns(1, &clockevent_xilinx_timer); + clockevent_xilinx_timer.cpumask = cpumask_of(0); + clockevents_register_device(&clockevent_xilinx_timer); +} + +static u64 xilinx_clock_read(void) +{ + return read_fn(timer_baseaddr + TCR1); } -static cycle_t microblaze_read(struct clocksource *cs) +static cycle_t xilinx_read(struct clocksource *cs) { /* reading actual value of timer 1 */ - return (cycle_t) (in_be32(TIMER_BASE + TCR1)); + return (cycle_t)xilinx_clock_read(); } -static struct timecounter microblaze_tc = { +static struct timecounter xilinx_tc = { .cc = NULL, }; -static cycle_t microblaze_cc_read(const struct cyclecounter *cc) +static cycle_t xilinx_cc_read(const struct cyclecounter *cc) { - return microblaze_read(NULL); + return xilinx_read(NULL); } -static struct cyclecounter microblaze_cc = { - .read = microblaze_cc_read, +static struct cyclecounter xilinx_cc = { + .read = xilinx_cc_read, .mask = CLOCKSOURCE_MASK(32), .shift = 8, }; -static int __init init_microblaze_timecounter(void) +static int __init init_xilinx_timecounter(void) { - microblaze_cc.mult = div_sc(timer_clock_freq, NSEC_PER_SEC, - microblaze_cc.shift); + xilinx_cc.mult = div_sc(timer_clock_freq, NSEC_PER_SEC, + xilinx_cc.shift); - timecounter_init(µblaze_tc, µblaze_cc, sched_clock()); + timecounter_init(&xilinx_tc, &xilinx_cc, sched_clock()); return 0; } static struct clocksource clocksource_microblaze = { - .name = "microblaze_clocksource", + .name = "xilinx_clocksource", .rating = 300, - .read = microblaze_read, + .read = xilinx_read, .mask = CLOCKSOURCE_MASK(32), .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -static int __init microblaze_clocksource_init(void) +static int __init xilinx_clocksource_init(void) { if (clocksource_register_hz(&clocksource_microblaze, timer_clock_freq)) panic("failed to register clocksource"); /* stop timer1 */ - out_be32(TIMER_BASE + TCSR1, in_be32(TIMER_BASE + TCSR1) & ~TCSR_ENT); + write_fn(read_fn(timer_baseaddr + TCSR1) & ~TCSR_ENT, + timer_baseaddr + TCSR1); /* start timer1 - up counting without interrupt */ - out_be32(TIMER_BASE + TCSR1, TCSR_TINT|TCSR_ENT|TCSR_ARHT); + write_fn(TCSR_TINT|TCSR_ENT|TCSR_ARHT, timer_baseaddr + TCSR1); /* register timecounter - for ftrace support */ - init_microblaze_timecounter(); + init_xilinx_timecounter(); return 0; } -/* - * We have to protect accesses before timer initialization - * and return 0 for sched_clock function below. - */ -static int timer_initialized; - -void __init time_init(void) +static void __init xilinx_timer_init(struct device_node *timer) { + struct clk *clk; + static int initialized; u32 irq; u32 timer_num = 1; - struct device_node *timer = NULL; - const void *prop; -#ifdef CONFIG_SELFMOD_TIMER - unsigned int timer_baseaddr = 0; - int arr_func[] = { - (int)µblaze_read, - (int)&timer_interrupt, - (int)µblaze_clocksource_init, - (int)µblaze_timer_set_mode, - (int)µblaze_timer_set_next_event, - 0 - }; -#endif - timer = of_find_compatible_node(NULL, NULL, "xlnx,xps-timer-1.00.a"); - BUG_ON(!timer); - timer_baseaddr = be32_to_cpup(of_get_property(timer, "reg", NULL)); - timer_baseaddr = (unsigned long) ioremap(timer_baseaddr, PAGE_SIZE); + if (initialized) + return; + + initialized = 1; + + timer_baseaddr = of_iomap(timer, 0); + if (!timer_baseaddr) { + pr_err("ERROR: invalid timer base address\n"); + BUG(); + } + + write_fn = timer_write32; + read_fn = timer_read32; + + write_fn(TCSR_MDT, timer_baseaddr + TCSR0); + if (!(read_fn(timer_baseaddr + TCSR0) & TCSR_MDT)) { + write_fn = timer_write32_be; + read_fn = timer_read32_be; + } + irq = irq_of_parse_and_map(timer, 0); - timer_num = be32_to_cpup(of_get_property(timer, - "xlnx,one-timer-only", NULL)); + + of_property_read_u32(timer, "xlnx,one-timer-only", &timer_num); if (timer_num) { - printk(KERN_EMERG "Please enable two timers in HW\n"); + pr_emerg("Please enable two timers in HW\n"); BUG(); } -#ifdef CONFIG_SELFMOD_TIMER - selfmod_function((int *) arr_func, timer_baseaddr); -#endif - printk(KERN_INFO "XPS timer #0 at 0x%08x, irq=%d\n", - timer_baseaddr, irq); - - /* If there is clock-frequency property than use it */ - prop = of_get_property(timer, "clock-frequency", NULL); - if (prop) - timer_clock_freq = be32_to_cpup(prop); - else + pr_info("%s: irq=%d\n", timer->full_name, irq); + + clk = of_clk_get(timer, 0); + if (IS_ERR(clk)) { + pr_err("ERROR: timer CCF input clock not found\n"); + /* If there is clock-frequency property than use it */ + of_property_read_u32(timer, "clock-frequency", + &timer_clock_freq); + } else { + timer_clock_freq = clk_get_rate(clk); + } + + if (!timer_clock_freq) { + pr_err("ERROR: Using CPU clock frequency\n"); timer_clock_freq = cpuinfo.cpu_clock_freq; + } freq_div_hz = timer_clock_freq / HZ; setup_irq(irq, &timer_irqaction); #ifdef CONFIG_HEART_BEAT - setup_heartbeat(); + microblaze_setup_heartbeat(); #endif - microblaze_clocksource_init(); - microblaze_clockevent_init(); - timer_initialized = 1; -} + xilinx_clocksource_init(); + xilinx_clockevent_init(); -unsigned long long notrace sched_clock(void) -{ - if (timer_initialized) { - struct clocksource *cs = &clocksource_microblaze; - - cycle_t cyc = cnt32_to_63(cs->read(NULL)) & LLONG_MAX; - return clocksource_cyc2ns(cyc, cs->mult, cs->shift); - } - return 0; + sched_clock_register(xilinx_clock_read, 32, timer_clock_freq); } + +CLOCKSOURCE_OF_DECLARE(xilinx_timer, "xlnx,xps-timer-1.00.a", + xilinx_timer_init); diff --git a/arch/microblaze/kernel/traps.c b/arch/microblaze/kernel/traps.c index ba034d421ec..cb619533a19 100644 --- a/arch/microblaze/kernel/traps.c +++ b/arch/microblaze/kernel/traps.c @@ -8,14 +8,13 @@ * for more details. */ +#include <linux/export.h> #include <linux/kernel.h> #include <linux/kallsyms.h> -#include <linux/module.h> #include <linux/sched.h> #include <linux/debug_locks.h> #include <asm/exceptions.h> -#include <asm/system.h> #include <asm/unwind.h> void trap_init(void) @@ -27,7 +26,7 @@ static unsigned long kstack_depth_to_print; /* 0 == entire stack */ static int __init kstack_setup(char *s) { - return !strict_strtoul(s, 0, &kstack_depth_to_print); + return !kstrtoul(s, 0, &kstack_depth_to_print); } __setup("kstack=", kstack_setup); @@ -67,9 +66,7 @@ void show_stack(struct task_struct *task, unsigned long *sp) } print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS, 32, 4, (void *)fp, words_to_show << 2, 0); - printk(KERN_INFO "\n\n"); - - pr_info("Call Trace:\n"); + pr_info("\n\nCall Trace:\n"); microblaze_unwind(task, NULL); pr_info("\n"); @@ -78,9 +75,3 @@ void show_stack(struct task_struct *task, unsigned long *sp) debug_show_held_locks(task); } - -void dump_stack(void) -{ - show_stack(NULL, NULL); -} -EXPORT_SYMBOL(dump_stack); diff --git a/arch/microblaze/kernel/unwind.c b/arch/microblaze/kernel/unwind.c index 9781a528cfc..1f7b8d44966 100644 --- a/arch/microblaze/kernel/unwind.c +++ b/arch/microblaze/kernel/unwind.c @@ -13,17 +13,18 @@ */ /* #define DEBUG 1 */ +#include <linux/export.h> #include <linux/kallsyms.h> #include <linux/kernel.h> #include <linux/sched.h> #include <linux/stacktrace.h> #include <linux/types.h> #include <linux/errno.h> -#include <linux/module.h> #include <linux/io.h> #include <asm/sections.h> #include <asm/exceptions.h> #include <asm/unwind.h> +#include <asm/switch_to.h> struct stack_trace; diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S index ac0e1a5d478..be9488d6973 100644 --- a/arch/microblaze/kernel/vmlinux.lds.S +++ b/arch/microblaze/kernel/vmlinux.lds.S @@ -44,13 +44,14 @@ SECTIONS { __fdt_blob : AT(ADDR(__fdt_blob) - LOAD_OFFSET) { _fdt_start = . ; /* place for fdt blob */ *(__fdt_blob) ; /* Any link-placed DTB */ - . = _fdt_start + 0x4000; /* Pad up to 16kbyte */ + . = _fdt_start + 0x8000; /* Pad up to 32kbyte */ _fdt_end = . ; } . = ALIGN(16); RODATA EXCEPTION_TABLE(16) + NOTES /* * sdata2 section can go anywhere, but must be word aligned @@ -131,7 +132,6 @@ SECTIONS { *(COMMON) . = ALIGN (4) ; __bss_stop = . ; - _ebss = . ; } . = ALIGN(PAGE_SIZE); _end = .; |