diff options
Diffstat (limited to 'arch/microblaze/kernel/cpu')
| -rw-r--r-- | arch/microblaze/kernel/cpu/Makefile | 2 | ||||
| -rw-r--r-- | arch/microblaze/kernel/cpu/cache.c | 168 | ||||
| -rw-r--r-- | arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c | 25 | ||||
| -rw-r--r-- | arch/microblaze/kernel/cpu/cpuinfo-static.c | 3 | ||||
| -rw-r--r-- | arch/microblaze/kernel/cpu/cpuinfo.c | 50 | ||||
| -rw-r--r-- | arch/microblaze/kernel/cpu/mb.c | 9 | ||||
| -rw-r--r-- | arch/microblaze/kernel/cpu/pvr.c | 3 |
7 files changed, 141 insertions, 119 deletions
diff --git a/arch/microblaze/kernel/cpu/Makefile b/arch/microblaze/kernel/cpu/Makefile index 59cc7bceaf8..fceed4edea4 100644 --- a/arch/microblaze/kernel/cpu/Makefile +++ b/arch/microblaze/kernel/cpu/Makefile @@ -6,7 +6,7 @@ ifdef CONFIG_FUNCTION_TRACER CFLAGS_REMOVE_cache.o = -pg endif -EXTRA_CFLAGS += -DCPU_MAJOR=$(CPU_MAJOR) -DCPU_MINOR=$(CPU_MINOR) \ +ccflags-y := -DCPU_MAJOR=$(CPU_MAJOR) -DCPU_MINOR=$(CPU_MINOR) \ -DCPU_REV=$(CPU_REV) obj-y += cache.o cpuinfo.o cpuinfo-pvr-full.o cpuinfo-static.o mb.o pvr.o diff --git a/arch/microblaze/kernel/cpu/cache.c b/arch/microblaze/kernel/cpu/cache.c index 109876e8d64..a6e44410672 100644 --- a/arch/microblaze/kernel/cpu/cache.c +++ b/arch/microblaze/kernel/cpu/cache.c @@ -17,82 +17,70 @@ static inline void __enable_icache_msr(void) { - __asm__ __volatile__ (" msrset r0, %0; \ - nop; " \ + __asm__ __volatile__ (" msrset r0, %0;" \ + "nop;" \ : : "i" (MSR_ICE) : "memory"); } static inline void __disable_icache_msr(void) { - __asm__ __volatile__ (" msrclr r0, %0; \ - nop; " \ + __asm__ __volatile__ (" msrclr r0, %0;" \ + "nop;" \ : : "i" (MSR_ICE) : "memory"); } static inline void __enable_dcache_msr(void) { - __asm__ __volatile__ (" msrset r0, %0; \ - nop; " \ - : \ - : "i" (MSR_DCE) \ - : "memory"); + __asm__ __volatile__ (" msrset r0, %0;" \ + "nop;" \ + : : "i" (MSR_DCE) : "memory"); } static inline void __disable_dcache_msr(void) { - __asm__ __volatile__ (" msrclr r0, %0; \ - nop; " \ - : \ - : "i" (MSR_DCE) \ - : "memory"); + __asm__ __volatile__ (" msrclr r0, %0;" \ + "nop; " \ + : : "i" (MSR_DCE) : "memory"); } static inline void __enable_icache_nomsr(void) { - __asm__ __volatile__ (" mfs r12, rmsr; \ - nop; \ - ori r12, r12, %0; \ - mts rmsr, r12; \ - nop; " \ - : \ - : "i" (MSR_ICE) \ - : "memory", "r12"); + __asm__ __volatile__ (" mfs r12, rmsr;" \ + "nop;" \ + "ori r12, r12, %0;" \ + "mts rmsr, r12;" \ + "nop;" \ + : : "i" (MSR_ICE) : "memory", "r12"); } static inline void __disable_icache_nomsr(void) { - __asm__ __volatile__ (" mfs r12, rmsr; \ - nop; \ - andi r12, r12, ~%0; \ - mts rmsr, r12; \ - nop; " \ - : \ - : "i" (MSR_ICE) \ - : "memory", "r12"); + __asm__ __volatile__ (" mfs r12, rmsr;" \ + "nop;" \ + "andi r12, r12, ~%0;" \ + "mts rmsr, r12;" \ + "nop;" \ + : : "i" (MSR_ICE) : "memory", "r12"); } static inline void __enable_dcache_nomsr(void) { - __asm__ __volatile__ (" mfs r12, rmsr; \ - nop; \ - ori r12, r12, %0; \ - mts rmsr, r12; \ - nop; " \ - : \ - : "i" (MSR_DCE) \ - : "memory", "r12"); + __asm__ __volatile__ (" mfs r12, rmsr;" \ + "nop;" \ + "ori r12, r12, %0;" \ + "mts rmsr, r12;" \ + "nop;" \ + : : "i" (MSR_DCE) : "memory", "r12"); } static inline void __disable_dcache_nomsr(void) { - __asm__ __volatile__ (" mfs r12, rmsr; \ - nop; \ - andi r12, r12, ~%0; \ - mts rmsr, r12; \ - nop; " \ - : \ - : "i" (MSR_DCE) \ - : "memory", "r12"); + __asm__ __volatile__ (" mfs r12, rmsr;" \ + "nop;" \ + "andi r12, r12, ~%0;" \ + "mts rmsr, r12;" \ + "nop;" \ + : : "i" (MSR_DCE) : "memory", "r12"); } @@ -106,7 +94,7 @@ do { \ int align = ~(cache_line_length - 1); \ end = min(start + cache_size, end); \ start &= align; \ -} while (0); +} while (0) /* * Helper macro to loop over the specified cache_size/line_length and @@ -118,18 +106,18 @@ do { \ int step = -line_length; \ WARN_ON(step >= 0); \ \ - __asm__ __volatile__ (" 1: " #op " %0, r0; \ - bgtid %0, 1b; \ - addk %0, %0, %1; \ - " : : "r" (len), "r" (step) \ + __asm__ __volatile__ (" 1: " #op " %0, r0;" \ + "bgtid %0, 1b;" \ + "addk %0, %0, %1;" \ + : : "r" (len), "r" (step) \ : "memory"); \ -} while (0); +} while (0) /* Used for wdc.flush/clear which can use rB for offset which is not possible * to use for simple wdc or wic. * * start address is cache aligned - * end address is not aligned, if end is aligned then I have to substract + * end address is not aligned, if end is aligned then I have to subtract * cacheline length because I can't flush/invalidate the next cacheline. * If is not, I align it because I will flush/invalidate whole line. */ @@ -142,28 +130,28 @@ do { \ count = end - start; \ WARN_ON(count < 0); \ \ - __asm__ __volatile__ (" 1: " #op " %0, %1; \ - bgtid %1, 1b; \ - addk %1, %1, %2; \ - " : : "r" (start), "r" (count), \ + __asm__ __volatile__ (" 1: " #op " %0, %1;" \ + "bgtid %1, 1b;" \ + "addk %1, %1, %2;" \ + : : "r" (start), "r" (count), \ "r" (step) : "memory"); \ -} while (0); +} while (0) /* It is used only first parameter for OP - for wic, wdc */ #define CACHE_RANGE_LOOP_1(start, end, line_length, op) \ do { \ - int volatile temp; \ + int volatile temp = 0; \ int align = ~(line_length - 1); \ end = ((end & align) == end) ? end - line_length : end & align; \ WARN_ON(end - start < 0); \ \ - __asm__ __volatile__ (" 1: " #op " %1, r0; \ - cmpu %0, %1, %2; \ - bgtid %0, 1b; \ - addk %1, %1, %3; \ - " : : "r" (temp), "r" (start), "r" (end),\ + __asm__ __volatile__ (" 1: " #op " %1, r0;" \ + "cmpu %0, %1, %2;" \ + "bgtid %0, 1b;" \ + "addk %1, %1, %3;" \ + : : "r" (temp), "r" (start), "r" (end), \ "r" (line_length) : "memory"); \ -} while (0); +} while (0) #define ASM_LOOP @@ -352,7 +340,7 @@ static void __invalidate_dcache_all_noirq_wt(void) #endif pr_debug("%s\n", __func__); #ifdef ASM_LOOP - CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length, wdc) + CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length, wdc); #else for (i = 0; i < cpuinfo.dcache_size; i += cpuinfo.dcache_line_length) @@ -361,7 +349,8 @@ static void __invalidate_dcache_all_noirq_wt(void) #endif } -/* FIXME It is blindly invalidation as is expected +/* + * FIXME It is blindly invalidation as is expected * but can't be called on noMMU in microblaze_cache_init below * * MS: noMMU kernel won't boot if simple wdc is used @@ -375,7 +364,7 @@ static void __invalidate_dcache_all_wb(void) pr_debug("%s\n", __func__); #ifdef ASM_LOOP CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length, - wdc) + wdc); #else for (i = 0; i < cpuinfo.dcache_size; i += cpuinfo.dcache_line_length) @@ -519,7 +508,7 @@ static void __flush_dcache_range_wb(unsigned long start, unsigned long end) struct scache *mbc; /* new wb cache model */ -const struct scache wb_msr = { +static const struct scache wb_msr = { .ie = __enable_icache_msr, .id = __disable_icache_msr, .ifl = __flush_icache_all_noirq, @@ -535,7 +524,7 @@ const struct scache wb_msr = { }; /* There is only difference in ie, id, de, dd functions */ -const struct scache wb_nomsr = { +static const struct scache wb_nomsr = { .ie = __enable_icache_nomsr, .id = __disable_icache_nomsr, .ifl = __flush_icache_all_noirq, @@ -551,7 +540,7 @@ const struct scache wb_nomsr = { }; /* Old wt cache model with disabling irq and turn off cache */ -const struct scache wt_msr = { +static const struct scache wt_msr = { .ie = __enable_icache_msr, .id = __disable_icache_msr, .ifl = __flush_icache_all_msr_irq, @@ -566,7 +555,7 @@ const struct scache wt_msr = { .dinr = __invalidate_dcache_range_msr_irq_wt, }; -const struct scache wt_nomsr = { +static const struct scache wt_nomsr = { .ie = __enable_icache_nomsr, .id = __disable_icache_nomsr, .ifl = __flush_icache_all_nomsr_irq, @@ -582,7 +571,7 @@ const struct scache wt_nomsr = { }; /* New wt cache model for newer Microblaze versions */ -const struct scache wt_msr_noirq = { +static const struct scache wt_msr_noirq = { .ie = __enable_icache_msr, .id = __disable_icache_msr, .ifl = __flush_icache_all_noirq, @@ -597,7 +586,7 @@ const struct scache wt_msr_noirq = { .dinr = __invalidate_dcache_range_nomsr_wt, }; -const struct scache wt_nomsr_noirq = { +static const struct scache wt_nomsr_noirq = { .ie = __enable_icache_nomsr, .id = __disable_icache_nomsr, .ifl = __flush_icache_all_noirq, @@ -616,49 +605,48 @@ const struct scache wt_nomsr_noirq = { #define CPUVER_7_20_A 0x0c #define CPUVER_7_20_D 0x0f -#define INFO(s) printk(KERN_INFO "cache: " s "\n"); - void microblaze_cache_init(void) { if (cpuinfo.use_instr & PVR2_USE_MSR_INSTR) { if (cpuinfo.dcache_wb) { - INFO("wb_msr"); + pr_info("wb_msr\n"); mbc = (struct scache *)&wb_msr; - if (cpuinfo.ver_code < CPUVER_7_20_D) { + if (cpuinfo.ver_code <= CPUVER_7_20_D) { /* MS: problem with signal handling - hw bug */ - INFO("WB won't work properly"); + pr_info("WB won't work properly\n"); } } else { if (cpuinfo.ver_code >= CPUVER_7_20_A) { - INFO("wt_msr_noirq"); + pr_info("wt_msr_noirq\n"); mbc = (struct scache *)&wt_msr_noirq; } else { - INFO("wt_msr"); + pr_info("wt_msr\n"); mbc = (struct scache *)&wt_msr; } } } else { if (cpuinfo.dcache_wb) { - INFO("wb_nomsr"); + pr_info("wb_nomsr\n"); mbc = (struct scache *)&wb_nomsr; - if (cpuinfo.ver_code < CPUVER_7_20_D) { + if (cpuinfo.ver_code <= CPUVER_7_20_D) { /* MS: problem with signal handling - hw bug */ - INFO("WB won't work properly"); + pr_info("WB won't work properly\n"); } } else { if (cpuinfo.ver_code >= CPUVER_7_20_A) { - INFO("wt_nomsr_noirq"); + pr_info("wt_nomsr_noirq\n"); mbc = (struct scache *)&wt_nomsr_noirq; } else { - INFO("wt_nomsr"); + pr_info("wt_nomsr\n"); mbc = (struct scache *)&wt_nomsr; } } } -/* FIXME Invalidation is done in U-BOOT - * WT cache: Data is already written to main memory - * WB cache: Discard data on noMMU which caused that kernel doesn't boot - */ + /* + * FIXME Invalidation is done in U-BOOT + * WT cache: Data is already written to main memory + * WB cache: Discard data on noMMU which caused that kernel doesn't boot + */ /* invalidate_dcache(); */ enable_dcache(); diff --git a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c index f70a6047f08..93c26cf50de 100644 --- a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c +++ b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c @@ -27,7 +27,7 @@ early_printk("ERROR: Microblaze " x "-different for PVR and DTS\n"); #else #define err_printk(x) \ - printk(KERN_INFO "ERROR: Microblaze " x "-different for PVR and DTS\n"); + pr_info("ERROR: Microblaze " x "-different for PVR and DTS\n"); #endif void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu) @@ -38,12 +38,11 @@ void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu) CI(ver_code, VERSION); if (!ci->ver_code) { - printk(KERN_ERR "ERROR: MB has broken PVR regs " - "-> use DTS setting\n"); + pr_err("ERROR: MB has broken PVR regs -> use DTS setting\n"); return; } - temp = PVR_USE_BARREL(pvr) | PVR_USE_MSR_INSTR(pvr) |\ + temp = PVR_USE_BARREL(pvr) | PVR_USE_MSR_INSTR(pvr) | PVR_USE_PCMP_INSTR(pvr) | PVR_USE_DIV(pvr); if (ci->use_instr != temp) err_printk("BARREL, MSR, PCMP or DIV"); @@ -59,19 +58,20 @@ void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu) err_printk("HW_FPU"); ci->use_fpu = temp; - ci->use_exc = PVR_OPCODE_0x0_ILLEGAL(pvr) |\ - PVR_UNALIGNED_EXCEPTION(pvr) |\ - PVR_ILL_OPCODE_EXCEPTION(pvr) |\ - PVR_IOPB_BUS_EXCEPTION(pvr) |\ - PVR_DOPB_BUS_EXCEPTION(pvr) |\ - PVR_DIV_ZERO_EXCEPTION(pvr) |\ - PVR_FPU_EXCEPTION(pvr) |\ + ci->use_exc = PVR_OPCODE_0x0_ILLEGAL(pvr) | + PVR_UNALIGNED_EXCEPTION(pvr) | + PVR_ILL_OPCODE_EXCEPTION(pvr) | + PVR_IOPB_BUS_EXCEPTION(pvr) | + PVR_DOPB_BUS_EXCEPTION(pvr) | + PVR_DIV_ZERO_EXCEPTION(pvr) | + PVR_FPU_EXCEPTION(pvr) | PVR_FSL_EXCEPTION(pvr); CI(pvr_user1, USER1); CI(pvr_user2, USER2); CI(mmu, USE_MMU); + CI(mmu_privins, MMU_PRIVINS); CI(endian, ENDIAN); CI(use_icache, USE_ICACHE); @@ -112,7 +112,4 @@ void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu) CI(num_wr_brk, NUMBER_OF_WR_ADDR_BRK); CI(fpga_family_code, TARGET_FAMILY); - - /* take timebase-frequency from DTS */ - ci->cpu_clock_freq = fcpu(cpu, "timebase-frequency"); } diff --git a/arch/microblaze/kernel/cpu/cpuinfo-static.c b/arch/microblaze/kernel/cpu/cpuinfo-static.c index b16b994ca3d..4854285b26e 100644 --- a/arch/microblaze/kernel/cpu/cpuinfo-static.c +++ b/arch/microblaze/kernel/cpu/cpuinfo-static.c @@ -113,12 +113,11 @@ void __init set_cpuinfo_static(struct cpuinfo *ci, struct device_node *cpu) ci->num_rd_brk = fcpu(cpu, "xlnx,number-of-rd-addr-brk"); ci->num_wr_brk = fcpu(cpu, "xlnx,number-of-wr-addr-brk"); - ci->cpu_clock_freq = fcpu(cpu, "timebase-frequency"); - ci->pvr_user1 = fcpu(cpu, "xlnx,pvr-user1"); ci->pvr_user2 = fcpu(cpu, "xlnx,pvr-user2"); ci->mmu = fcpu(cpu, "xlnx,use-mmu"); + ci->mmu_privins = fcpu(cpu, "xlnx,mmu-privileged-instr"); ci->endian = fcpu(cpu, "xlnx,endianness"); ci->ver_code = 0; diff --git a/arch/microblaze/kernel/cpu/cpuinfo.c b/arch/microblaze/kernel/cpu/cpuinfo.c index 2c309fccf23..234acad79b9 100644 --- a/arch/microblaze/kernel/cpu/cpuinfo.c +++ b/arch/microblaze/kernel/cpu/cpuinfo.c @@ -8,6 +8,7 @@ * for more details. */ +#include <linux/clk.h> #include <linux/init.h> #include <asm/cpuinfo.h> #include <asm/pvr.h> @@ -33,6 +34,15 @@ const struct cpu_ver_key cpu_ver_lookup[] = { {"7.30.b", 0x11}, {"8.00.a", 0x12}, {"8.00.b", 0x13}, + {"8.10.a", 0x14}, + {"8.20.a", 0x15}, + {"8.20.b", 0x16}, + {"8.30.a", 0x17}, + {"8.40.a", 0x18}, + {"8.40.b", 0x19}, + {"8.50.a", 0x1a}, + {"9.0", 0x1b}, + {"9.1", 0x1d}, {NULL, 0}, }; @@ -53,38 +63,62 @@ const struct family_string_key family_string_lookup[] = { {"virtex6", 0xe}, /* FIXME There is no key code defined for spartan2 */ {"spartan2", 0xf0}, + {"kintex7", 0x10}, + {"artix7", 0x11}, + {"zynq7000", 0x12}, {NULL, 0}, }; struct cpuinfo cpuinfo; +static struct device_node *cpu; void __init setup_cpuinfo(void) { - struct device_node *cpu = NULL; - cpu = (struct device_node *) of_find_node_by_type(NULL, "cpu"); if (!cpu) - printk(KERN_ERR "You don't have cpu!!!\n"); + pr_err("You don't have cpu!!!\n"); - printk(KERN_INFO "%s: initialising\n", __func__); + pr_info("%s: initialising\n", __func__); switch (cpu_has_pvr()) { case 0: - printk(KERN_WARNING - "%s: No PVR support. Using static CPU info from FDT\n", + pr_warn("%s: No PVR support. Using static CPU info from FDT\n", __func__); set_cpuinfo_static(&cpuinfo, cpu); break; /* FIXME I found weird behavior with MB 7.00.a/b 7.10.a * please do not use FULL PVR with MMU */ case 1: - printk(KERN_INFO "%s: Using full CPU PVR support\n", + pr_info("%s: Using full CPU PVR support\n", __func__); set_cpuinfo_static(&cpuinfo, cpu); set_cpuinfo_pvr_full(&cpuinfo, cpu); break; default: - printk(KERN_WARNING "%s: Unsupported PVR setting\n", __func__); + pr_warn("%s: Unsupported PVR setting\n", __func__); set_cpuinfo_static(&cpuinfo, cpu); } + + if (cpuinfo.mmu_privins) + pr_warn("%s: Stream instructions enabled" + " - USERSPACE CAN LOCK THIS KERNEL!\n", __func__); +} + +void __init setup_cpuinfo_clk(void) +{ + struct clk *clk; + + clk = of_clk_get(cpu, 0); + if (IS_ERR(clk)) { + pr_err("ERROR: CPU CCF input clock not found\n"); + /* take timebase-frequency from DTS */ + cpuinfo.cpu_clock_freq = fcpu(cpu, "timebase-frequency"); + } else { + cpuinfo.cpu_clock_freq = clk_get_rate(clk); + } + + if (!cpuinfo.cpu_clock_freq) { + pr_err("ERROR: CPU clock frequency not setup\n"); + BUG(); + } } diff --git a/arch/microblaze/kernel/cpu/mb.c b/arch/microblaze/kernel/cpu/mb.c index b4048af0261..7b5dca7ed39 100644 --- a/arch/microblaze/kernel/cpu/mb.c +++ b/arch/microblaze/kernel/cpu/mb.c @@ -97,6 +97,10 @@ static int show_cpuinfo(struct seq_file *m, void *v) (cpuinfo.use_exc & PVR2_FPU_EXC_MASK) ? "fpu " : "", (cpuinfo.use_exc & PVR2_USE_FSL_EXC) ? "fsl " : ""); + count += seq_printf(m, + "Stream-insns:\t%sprivileged\n", + cpuinfo.mmu_privins ? "un" : ""); + if (cpuinfo.use_icache) count += seq_printf(m, "Icache:\t\t%ukB\tline length:\t%dB\n", @@ -110,10 +114,11 @@ static int show_cpuinfo(struct seq_file *m, void *v) "Dcache:\t\t%ukB\tline length:\t%dB\n", cpuinfo.dcache_size >> 10, cpuinfo.dcache_line_length); + seq_printf(m, "Dcache-Policy:\t"); if (cpuinfo.dcache_wb) - count += seq_printf(m, "\t\twrite-back\n"); + count += seq_printf(m, "write-back\n"); else - count += seq_printf(m, "\t\twrite-through\n"); + count += seq_printf(m, "write-through\n"); } else count += seq_printf(m, "Dcache:\t\tno\n"); diff --git a/arch/microblaze/kernel/cpu/pvr.c b/arch/microblaze/kernel/cpu/pvr.c index 488c1ed24e3..8d0dc6db48c 100644 --- a/arch/microblaze/kernel/cpu/pvr.c +++ b/arch/microblaze/kernel/cpu/pvr.c @@ -12,7 +12,6 @@ #include <linux/kernel.h> #include <linux/compiler.h> -#include <asm/system.h> #include <asm/exceptions.h> #include <asm/pvr.h> @@ -28,7 +27,7 @@ tmp = 0x0; /* Prevent warning about unused */ \ __asm__ __volatile__ ( \ "mfs %0, rpvr" #pvrid ";" \ - : "=r" (tmp) : : "memory"); \ + : "=r" (tmp) : : "memory"); \ val = tmp; \ } |