1 files changed, 0 insertions, 125 deletions
diff --git a/arch/m68knommu/platform/68328/config.c b/arch/m68knommu/platform/68328/config.c
deleted file mode 100644
index fd7c93f8648..00000000000
--- a/arch/m68knommu/platform/68328/config.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- *  linux/arch/$(ARCH)/platform/$(PLATFORM)/config.c
- *
- *  Copyright (C) 1993 Hamish Macdonald
- *  Copyright (C) 1999 D. Jeff Dionne
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- *
- * VZ Support/Fixes             Evan Stawnyczy <e@lineo.ca>
- */
-
-#include <asm/dbg.h>
-#include <stdarg.h>
-#include <linux/config.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/tty.h>
-#include <linux/console.h>
-#include <linux/interrupt.h>
-#include <asm/current.h>
-
-#include <asm/setup.h>
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/irq.h>
-#include <asm/machdep.h>
-#include <asm/MC68328.h>
-
-
-void BSP_sched_init(irqreturn_t (*timer_routine)(int, void *, struct pt_regs *))
-{
-
-#ifdef CONFIG_XCOPILOT_BUGS
-  /*
-   * The only thing I know is that CLK32 is not available on Xcopilot
-   * I have little idea about what frequency SYSCLK has on Xcopilot. 
-   * The values for prescaler and compare registers were simply 
-   * taken from the original source
-   */
-
-  /* Restart mode, Enable int, SYSCLK, Enable timer */
-  TCTL2 = TCTL_OM | TCTL_IRQEN | TCTL_CLKSOURCE_SYSCLK | TCTL_TEN;
-  /* Set prescaler */
-  TPRER2 = 2;
-  /* Set compare register */
-  TCMP2 = 0xd7e4;
-#else
-  /* Restart mode, Enable int, 32KHz, Enable timer */
-  TCTL2 = TCTL_OM | TCTL_IRQEN | TCTL_CLKSOURCE_32KHZ | TCTL_TEN;
-  /* Set prescaler (Divide 32KHz by 32)*/
-  TPRER2 = 31;
-  /* Set compare register  32Khz / 32 / 10 = 100 */
-  TCMP2 = 10;
-#endif
-                                                                    
-  request_irq(TMR2_IRQ_NUM, timer_routine, IRQ_FLG_LOCK, "timer", NULL);
-}
-
-void BSP_tick(void)
-{
-  /* Reset Timer2 */
-  TSTAT2 &= 0;
-}
-
-unsigned long BSP_gettimeoffset (void)
-{
-  return 0;
-}
-
-void BSP_gettod (int *yearp, int *monp, int *dayp,
-		   int *hourp, int *minp, int *secp)
-{
-}
-
-int BSP_hwclk(int op, struct hwclk_time *t)
-{
-  if (!op) {
-    /* read */
-  } else {
-    /* write */
-  }
-  return 0;
-}
-
-int BSP_set_clock_mmss (unsigned long nowtime)
-{
-#if 0
-  short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
-
-  tod->second1 = real_seconds / 10;
-  tod->second2 = real_seconds % 10;
-  tod->minute1 = real_minutes / 10;
-  tod->minute2 = real_minutes % 10;
-#endif
-  return 0;
-}
-
-void BSP_reset (void)
-{
-  local_irq_disable();
-  asm volatile ("moveal #0x10c00000, %a0;\n\t"
-		"moveb #0, 0xFFFFF300;\n\t"
-		"moveal 0(%a0), %sp;\n\t"
-		"moveal 4(%a0), %a0;\n\t"
-		"jmp (%a0);");
-}
-
-void config_BSP(char *command, int len)
-{
-  printk(KERN_INFO "\n68328 support D. Jeff Dionne <jeff@uclinux.org>\n");
-  printk(KERN_INFO "68328 support Kenneth Albanowski <kjahds@kjshds.com>\n");
-  printk(KERN_INFO "68328/Pilot support Bernhard Kuhn <kuhn@lpr.e-technik.tu-muenchen.de>\n");
-
-  mach_sched_init      = BSP_sched_init;
-  mach_tick            = BSP_tick;
-  mach_gettimeoffset   = BSP_gettimeoffset;
-  mach_gettod          = BSP_gettod;
-  mach_hwclk           = NULL;
-  mach_set_clock_mmss  = NULL;
-  mach_reset           = BSP_reset;
-  *command = '\0';
-}