diff options
Diffstat (limited to 'arch/m68knommu/platform/532x/config.c')
| -rw-r--r-- | arch/m68knommu/platform/532x/config.c | 648 |
1 files changed, 0 insertions, 648 deletions
diff --git a/arch/m68knommu/platform/532x/config.c b/arch/m68knommu/platform/532x/config.c deleted file mode 100644 index ca51323f957..00000000000 --- a/arch/m68knommu/platform/532x/config.c +++ /dev/null @@ -1,648 +0,0 @@ -/***************************************************************************/ - -/* - * linux/arch/m68knommu/platform/532x/config.c - * - * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com) - * Copyright (C) 2000, Lineo (www.lineo.com) - * Yaroslav Vinogradov yaroslav.vinogradov@freescale.com - * Copyright Freescale Semiconductor, Inc 2006 - * Copyright (c) 2006, emlix, Sebastian Hess <sh@emlix.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -/***************************************************************************/ - -#include <linux/kernel.h> -#include <linux/param.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/spi/spi.h> -#include <linux/gpio.h> -#include <asm/machdep.h> -#include <asm/coldfire.h> -#include <asm/mcfsim.h> -#include <asm/mcfuart.h> -#include <asm/mcfdma.h> -#include <asm/mcfwdebug.h> -#include <asm/mcfqspi.h> - -/***************************************************************************/ - -static struct mcf_platform_uart m532x_uart_platform[] = { - { - .mapbase = MCFUART_BASE1, - .irq = MCFINT_VECBASE + MCFINT_UART0, - }, - { - .mapbase = MCFUART_BASE2, - .irq = MCFINT_VECBASE + MCFINT_UART1, - }, - { - .mapbase = MCFUART_BASE3, - .irq = MCFINT_VECBASE + MCFINT_UART2, - }, - { }, -}; - -static struct platform_device m532x_uart = { - .name = "mcfuart", - .id = 0, - .dev.platform_data = m532x_uart_platform, -}; - -static struct resource m532x_fec_resources[] = { - { - .start = 0xfc030000, - .end = 0xfc0307ff, - .flags = IORESOURCE_MEM, - }, - { - .start = 64 + 36, - .end = 64 + 36, - .flags = IORESOURCE_IRQ, - }, - { - .start = 64 + 40, - .end = 64 + 40, - .flags = IORESOURCE_IRQ, - }, - { - .start = 64 + 42, - .end = 64 + 42, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device m532x_fec = { - .name = "fec", - .id = 0, - .num_resources = ARRAY_SIZE(m532x_fec_resources), - .resource = m532x_fec_resources, -}; - -#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) -static struct resource m532x_qspi_resources[] = { - { - .start = MCFQSPI_IOBASE, - .end = MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = MCFINT_VECBASE + MCFINT_QSPI, - .end = MCFINT_VECBASE + MCFINT_QSPI, - .flags = IORESOURCE_IRQ, - }, -}; - -#define MCFQSPI_CS0 84 -#define MCFQSPI_CS1 85 -#define MCFQSPI_CS2 86 - -static int m532x_cs_setup(struct mcfqspi_cs_control *cs_control) -{ - int status; - - status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0"); - if (status) { - pr_debug("gpio_request for MCFQSPI_CS0 failed\n"); - goto fail0; - } - status = gpio_direction_output(MCFQSPI_CS0, 1); - if (status) { - pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n"); - goto fail1; - } - - status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1"); - if (status) { - pr_debug("gpio_request for MCFQSPI_CS1 failed\n"); - goto fail1; - } - status = gpio_direction_output(MCFQSPI_CS1, 1); - if (status) { - pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n"); - goto fail2; - } - - status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2"); - if (status) { - pr_debug("gpio_request for MCFQSPI_CS2 failed\n"); - goto fail2; - } - status = gpio_direction_output(MCFQSPI_CS2, 1); - if (status) { - pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n"); - goto fail3; - } - - return 0; - -fail3: - gpio_free(MCFQSPI_CS2); -fail2: - gpio_free(MCFQSPI_CS1); -fail1: - gpio_free(MCFQSPI_CS0); -fail0: - return status; -} - -static void m532x_cs_teardown(struct mcfqspi_cs_control *cs_control) -{ - gpio_free(MCFQSPI_CS2); - gpio_free(MCFQSPI_CS1); - gpio_free(MCFQSPI_CS0); -} - -static void m532x_cs_select(struct mcfqspi_cs_control *cs_control, - u8 chip_select, bool cs_high) -{ - gpio_set_value(MCFQSPI_CS0 + chip_select, cs_high); -} - -static void m532x_cs_deselect(struct mcfqspi_cs_control *cs_control, - u8 chip_select, bool cs_high) -{ - gpio_set_value(MCFQSPI_CS0 + chip_select, !cs_high); -} - -static struct mcfqspi_cs_control m532x_cs_control = { - .setup = m532x_cs_setup, - .teardown = m532x_cs_teardown, - .select = m532x_cs_select, - .deselect = m532x_cs_deselect, -}; - -static struct mcfqspi_platform_data m532x_qspi_data = { - .bus_num = 0, - .num_chipselect = 3, - .cs_control = &m532x_cs_control, -}; - -static struct platform_device m532x_qspi = { - .name = "mcfqspi", - .id = 0, - .num_resources = ARRAY_SIZE(m532x_qspi_resources), - .resource = m532x_qspi_resources, - .dev.platform_data = &m532x_qspi_data, -}; - -static void __init m532x_qspi_init(void) -{ - /* setup QSPS pins for QSPI with gpio CS control */ - writew(0x01f0, MCF_GPIO_PAR_QSPI); -} -#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */ - - -static struct platform_device *m532x_devices[] __initdata = { - &m532x_uart, - &m532x_fec, -#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) - &m532x_qspi, -#endif -}; - -/***************************************************************************/ - -static void __init m532x_uart_init_line(int line, int irq) -{ - if (line == 0) { - /* GPIO initialization */ - MCF_GPIO_PAR_UART |= 0x000F; - } else if (line == 1) { - /* GPIO initialization */ - MCF_GPIO_PAR_UART |= 0x0FF0; - } -} - -static void __init m532x_uarts_init(void) -{ - const int nrlines = ARRAY_SIZE(m532x_uart_platform); - int line; - - for (line = 0; (line < nrlines); line++) - m532x_uart_init_line(line, m532x_uart_platform[line].irq); -} -/***************************************************************************/ - -static void __init m532x_fec_init(void) -{ - /* Set multi-function pins to ethernet mode for fec0 */ - MCF_GPIO_PAR_FECI2C |= (MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC | - MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO); - MCF_GPIO_PAR_FEC = (MCF_GPIO_PAR_FEC_PAR_FEC_7W_FEC | - MCF_GPIO_PAR_FEC_PAR_FEC_MII_FEC); -} - -/***************************************************************************/ - -static void m532x_cpu_reset(void) -{ - local_irq_disable(); - __raw_writeb(MCF_RCR_SWRESET, MCF_RCR); -} - -/***************************************************************************/ - -void __init config_BSP(char *commandp, int size) -{ -#if !defined(CONFIG_BOOTPARAM) - /* Copy command line from FLASH to local buffer... */ - memcpy(commandp, (char *) 0x4000, 4); - if(strncmp(commandp, "kcl ", 4) == 0){ - memcpy(commandp, (char *) 0x4004, size); - commandp[size-1] = 0; - } else { - memset(commandp, 0, size); - } -#endif - -#ifdef CONFIG_BDM_DISABLE - /* - * Disable the BDM clocking. This also turns off most of the rest of - * the BDM device. This is good for EMC reasons. This option is not - * incompatible with the memory protection option. - */ - wdebug(MCFDEBUG_CSR, MCFDEBUG_CSR_PSTCLK); -#endif -} - -/***************************************************************************/ - -static int __init init_BSP(void) -{ - m532x_uarts_init(); - m532x_fec_init(); -#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) - m532x_qspi_init(); -#endif - platform_add_devices(m532x_devices, ARRAY_SIZE(m532x_devices)); - return 0; -} - -arch_initcall(init_BSP); - -/***************************************************************************/ -/* Board initialization */ -/***************************************************************************/ -/* - * PLL min/max specifications - */ -#define MAX_FVCO 500000 /* KHz */ -#define MAX_FSYS 80000 /* KHz */ -#define MIN_FSYS 58333 /* KHz */ -#define FREF 16000 /* KHz */ - - -#define MAX_MFD 135 /* Multiplier */ -#define MIN_MFD 88 /* Multiplier */ -#define BUSDIV 6 /* Divider */ - -/* - * Low Power Divider specifications - */ -#define MIN_LPD (1 << 0) /* Divider (not encoded) */ -#define MAX_LPD (1 << 15) /* Divider (not encoded) */ -#define DEFAULT_LPD (1 << 1) /* Divider (not encoded) */ - -#define SYS_CLK_KHZ 80000 -#define SYSTEM_PERIOD 12.5 -/* - * SDRAM Timing Parameters - */ -#define SDRAM_BL 8 /* # of beats in a burst */ -#define SDRAM_TWR 2 /* in clocks */ -#define SDRAM_CASL 2.5 /* CASL in clocks */ -#define SDRAM_TRCD 2 /* in clocks */ -#define SDRAM_TRP 2 /* in clocks */ -#define SDRAM_TRFC 7 /* in clocks */ -#define SDRAM_TREFI 7800 /* in ns */ - -#define EXT_SRAM_ADDRESS (0xC0000000) -#define FLASH_ADDRESS (0x00000000) -#define SDRAM_ADDRESS (0x40000000) - -#define NAND_FLASH_ADDRESS (0xD0000000) - -int sys_clk_khz = 0; -int sys_clk_mhz = 0; - -void wtm_init(void); -void scm_init(void); -void gpio_init(void); -void fbcs_init(void); -void sdramc_init(void); -int clock_pll (int fsys, int flags); -int clock_limp (int); -int clock_exit_limp (void); -int get_sys_clock (void); - -asmlinkage void __init sysinit(void) -{ - sys_clk_khz = clock_pll(0, 0); - sys_clk_mhz = sys_clk_khz/1000; - - wtm_init(); - scm_init(); - gpio_init(); - fbcs_init(); - sdramc_init(); -} - -void wtm_init(void) -{ - /* Disable watchdog timer */ - MCF_WTM_WCR = 0; -} - -#define MCF_SCM_BCR_GBW (0x00000100) -#define MCF_SCM_BCR_GBR (0x00000200) - -void scm_init(void) -{ - /* All masters are trusted */ - MCF_SCM_MPR = 0x77777777; - - /* Allow supervisor/user, read/write, and trusted/untrusted - access to all slaves */ - MCF_SCM_PACRA = 0; - MCF_SCM_PACRB = 0; - MCF_SCM_PACRC = 0; - MCF_SCM_PACRD = 0; - MCF_SCM_PACRE = 0; - MCF_SCM_PACRF = 0; - - /* Enable bursts */ - MCF_SCM_BCR = (MCF_SCM_BCR_GBR | MCF_SCM_BCR_GBW); -} - - -void fbcs_init(void) -{ - MCF_GPIO_PAR_CS = 0x0000003E; - - /* Latch chip select */ - MCF_FBCS1_CSAR = 0x10080000; - - MCF_FBCS1_CSCR = 0x002A3780; - MCF_FBCS1_CSMR = (MCF_FBCS_CSMR_BAM_2M | MCF_FBCS_CSMR_V); - - /* Initialize latch to drive signals to inactive states */ - *((u16 *)(0x10080000)) = 0xFFFF; - - /* External SRAM */ - MCF_FBCS1_CSAR = EXT_SRAM_ADDRESS; - MCF_FBCS1_CSCR = (MCF_FBCS_CSCR_PS_16 - | MCF_FBCS_CSCR_AA - | MCF_FBCS_CSCR_SBM - | MCF_FBCS_CSCR_WS(1)); - MCF_FBCS1_CSMR = (MCF_FBCS_CSMR_BAM_512K - | MCF_FBCS_CSMR_V); - - /* Boot Flash connected to FBCS0 */ - MCF_FBCS0_CSAR = FLASH_ADDRESS; - MCF_FBCS0_CSCR = (MCF_FBCS_CSCR_PS_16 - | MCF_FBCS_CSCR_BEM - | MCF_FBCS_CSCR_AA - | MCF_FBCS_CSCR_SBM - | MCF_FBCS_CSCR_WS(7)); - MCF_FBCS0_CSMR = (MCF_FBCS_CSMR_BAM_32M - | MCF_FBCS_CSMR_V); -} - -void sdramc_init(void) -{ - /* - * Check to see if the SDRAM has already been initialized - * by a run control tool - */ - if (!(MCF_SDRAMC_SDCR & MCF_SDRAMC_SDCR_REF)) { - /* SDRAM chip select initialization */ - - /* Initialize SDRAM chip select */ - MCF_SDRAMC_SDCS0 = (0 - | MCF_SDRAMC_SDCS_BA(SDRAM_ADDRESS) - | MCF_SDRAMC_SDCS_CSSZ(MCF_SDRAMC_SDCS_CSSZ_32MBYTE)); - - /* - * Basic configuration and initialization - */ - MCF_SDRAMC_SDCFG1 = (0 - | MCF_SDRAMC_SDCFG1_SRD2RW((int)((SDRAM_CASL + 2) + 0.5 )) - | MCF_SDRAMC_SDCFG1_SWT2RD(SDRAM_TWR + 1) - | MCF_SDRAMC_SDCFG1_RDLAT((int)((SDRAM_CASL*2) + 2)) - | MCF_SDRAMC_SDCFG1_ACT2RW((int)((SDRAM_TRCD ) + 0.5)) - | MCF_SDRAMC_SDCFG1_PRE2ACT((int)((SDRAM_TRP ) + 0.5)) - | MCF_SDRAMC_SDCFG1_REF2ACT((int)(((SDRAM_TRFC) ) + 0.5)) - | MCF_SDRAMC_SDCFG1_WTLAT(3)); - MCF_SDRAMC_SDCFG2 = (0 - | MCF_SDRAMC_SDCFG2_BRD2PRE(SDRAM_BL/2 + 1) - | MCF_SDRAMC_SDCFG2_BWT2RW(SDRAM_BL/2 + SDRAM_TWR) - | MCF_SDRAMC_SDCFG2_BRD2WT((int)((SDRAM_CASL+SDRAM_BL/2-1.0)+0.5)) - | MCF_SDRAMC_SDCFG2_BL(SDRAM_BL-1)); - - - /* - * Precharge and enable write to SDMR - */ - MCF_SDRAMC_SDCR = (0 - | MCF_SDRAMC_SDCR_MODE_EN - | MCF_SDRAMC_SDCR_CKE - | MCF_SDRAMC_SDCR_DDR - | MCF_SDRAMC_SDCR_MUX(1) - | MCF_SDRAMC_SDCR_RCNT((int)(((SDRAM_TREFI/(SYSTEM_PERIOD*64)) - 1) + 0.5)) - | MCF_SDRAMC_SDCR_PS_16 - | MCF_SDRAMC_SDCR_IPALL); - - /* - * Write extended mode register - */ - MCF_SDRAMC_SDMR = (0 - | MCF_SDRAMC_SDMR_BNKAD_LEMR - | MCF_SDRAMC_SDMR_AD(0x0) - | MCF_SDRAMC_SDMR_CMD); - - /* - * Write mode register and reset DLL - */ - MCF_SDRAMC_SDMR = (0 - | MCF_SDRAMC_SDMR_BNKAD_LMR - | MCF_SDRAMC_SDMR_AD(0x163) - | MCF_SDRAMC_SDMR_CMD); - - /* - * Execute a PALL command - */ - MCF_SDRAMC_SDCR |= MCF_SDRAMC_SDCR_IPALL; - - /* - * Perform two REF cycles - */ - MCF_SDRAMC_SDCR |= MCF_SDRAMC_SDCR_IREF; - MCF_SDRAMC_SDCR |= MCF_SDRAMC_SDCR_IREF; - - /* - * Write mode register and clear reset DLL - */ - MCF_SDRAMC_SDMR = (0 - | MCF_SDRAMC_SDMR_BNKAD_LMR - | MCF_SDRAMC_SDMR_AD(0x063) - | MCF_SDRAMC_SDMR_CMD); - - /* - * Enable auto refresh and lock SDMR - */ - MCF_SDRAMC_SDCR &= ~MCF_SDRAMC_SDCR_MODE_EN; - MCF_SDRAMC_SDCR |= (0 - | MCF_SDRAMC_SDCR_REF - | MCF_SDRAMC_SDCR_DQS_OE(0xC)); - } -} - -void gpio_init(void) -{ - /* Enable UART0 pins */ - MCF_GPIO_PAR_UART = ( 0 - | MCF_GPIO_PAR_UART_PAR_URXD0 - | MCF_GPIO_PAR_UART_PAR_UTXD0); - - /* Initialize TIN3 as a GPIO output to enable the write - half of the latch */ - MCF_GPIO_PAR_TIMER = 0x00; - __raw_writeb(0x08, MCFGPIO_PDDR_TIMER); - __raw_writeb(0x00, MCFGPIO_PCLRR_TIMER); - -} - -int clock_pll(int fsys, int flags) -{ - int fref, temp, fout, mfd; - u32 i; - - fref = FREF; - - if (fsys == 0) { - /* Return current PLL output */ - mfd = MCF_PLL_PFDR; - - return (fref * mfd / (BUSDIV * 4)); - } - - /* Check bounds of requested system clock */ - if (fsys > MAX_FSYS) - fsys = MAX_FSYS; - if (fsys < MIN_FSYS) - fsys = MIN_FSYS; - - /* Multiplying by 100 when calculating the temp value, - and then dividing by 100 to calculate the mfd allows - for exact values without needing to include floating - point libraries. */ - temp = 100 * fsys / fref; - mfd = 4 * BUSDIV * temp / 100; - - /* Determine the output frequency for selected values */ - fout = (fref * mfd / (BUSDIV * 4)); - - /* - * Check to see if the SDRAM has already been initialized. - * If it has then the SDRAM needs to be put into self refresh - * mode before reprogramming the PLL. - */ - if (MCF_SDRAMC_SDCR & MCF_SDRAMC_SDCR_REF) - /* Put SDRAM into self refresh mode */ - MCF_SDRAMC_SDCR &= ~MCF_SDRAMC_SDCR_CKE; - - /* - * Initialize the PLL to generate the new system clock frequency. - * The device must be put into LIMP mode to reprogram the PLL. - */ - - /* Enter LIMP mode */ - clock_limp(DEFAULT_LPD); - - /* Reprogram PLL for desired fsys */ - MCF_PLL_PODR = (0 - | MCF_PLL_PODR_CPUDIV(BUSDIV/3) - | MCF_PLL_PODR_BUSDIV(BUSDIV)); - - MCF_PLL_PFDR = mfd; - - /* Exit LIMP mode */ - clock_exit_limp(); - - /* - * Return the SDRAM to normal operation if it is in use. - */ - if (MCF_SDRAMC_SDCR & MCF_SDRAMC_SDCR_REF) - /* Exit self refresh mode */ - MCF_SDRAMC_SDCR |= MCF_SDRAMC_SDCR_CKE; - - /* Errata - workaround for SDRAM opeartion after exiting LIMP mode */ - MCF_SDRAMC_LIMP_FIX = MCF_SDRAMC_REFRESH; - - /* wait for DQS logic to relock */ - for (i = 0; i < 0x200; i++) - ; - - return fout; -} - -int clock_limp(int div) -{ - u32 temp; - - /* Check bounds of divider */ - if (div < MIN_LPD) - div = MIN_LPD; - if (div > MAX_LPD) - div = MAX_LPD; - - /* Save of the current value of the SSIDIV so we don't - overwrite the value*/ - temp = (MCF_CCM_CDR & MCF_CCM_CDR_SSIDIV(0xF)); - - /* Apply the divider to the system clock */ - MCF_CCM_CDR = ( 0 - | MCF_CCM_CDR_LPDIV(div) - | MCF_CCM_CDR_SSIDIV(temp)); - - MCF_CCM_MISCCR |= MCF_CCM_MISCCR_LIMP; - - return (FREF/(3*(1 << div))); -} - -int clock_exit_limp(void) -{ - int fout; - - /* Exit LIMP mode */ - MCF_CCM_MISCCR = (MCF_CCM_MISCCR & ~ MCF_CCM_MISCCR_LIMP); - - /* Wait for PLL to lock */ - while (!(MCF_CCM_MISCCR & MCF_CCM_MISCCR_PLL_LOCK)) - ; - - fout = get_sys_clock(); - - return fout; -} - -int get_sys_clock(void) -{ - int divider; - - /* Test to see if device is in LIMP mode */ - if (MCF_CCM_MISCCR & MCF_CCM_MISCCR_LIMP) { - divider = MCF_CCM_CDR & MCF_CCM_CDR_LPDIV(0xF); - return (FREF/(2 << divider)); - } - else - return ((FREF * MCF_PLL_PFDR) / (BUSDIV * 4)); -} |