diff options
Diffstat (limited to 'arch/m68knommu/platform/5307/head.S')
| -rw-r--r-- | arch/m68knommu/platform/5307/head.S | 265 |
1 files changed, 0 insertions, 265 deletions
diff --git a/arch/m68knommu/platform/5307/head.S b/arch/m68knommu/platform/5307/head.S deleted file mode 100644 index c30c462b99b..00000000000 --- a/arch/m68knommu/platform/5307/head.S +++ /dev/null @@ -1,265 +0,0 @@ -/*****************************************************************************/ - -/* - * head.S -- common startup code for ColdFire CPUs. - * - * (C) Copyright 1999-2004, Greg Ungerer (gerg@snapgear.com). - */ - -/*****************************************************************************/ - -#include <linux/config.h> -#include <linux/sys.h> -#include <linux/linkage.h> -#include <asm/asm-offsets.h> -#include <asm/coldfire.h> -#include <asm/mcfcache.h> -#include <asm/mcfsim.h> - -/*****************************************************************************/ - -/* - * Define fixed memory sizes. Configuration of a fixed memory size - * overrides everything else. If the user defined a size we just - * blindly use it (they know what they are doing right :-) - */ -#if defined(CONFIG_RAM32MB) -#define MEM_SIZE 0x02000000 /* memory size 32Mb */ -#elif defined(CONFIG_RAM16MB) -#define MEM_SIZE 0x01000000 /* memory size 16Mb */ -#elif defined(CONFIG_RAM8MB) -#define MEM_SIZE 0x00800000 /* memory size 8Mb */ -#elif defined(CONFIG_RAM4MB) -#define MEM_SIZE 0x00400000 /* memory size 4Mb */ -#elif defined(CONFIG_RAM1MB) -#define MEM_SIZE 0x00100000 /* memory size 1Mb */ -#endif - -/* - * Memory size exceptions for special cases. Some boards may be set - * for auto memory sizing, but we can't do it that way for some reason. - * For example the 5206eLITE board has static RAM, and auto-detecting - * the SDRAM will do you no good at all. Same goes for the MOD5272. - */ -#ifdef CONFIG_RAMAUTO -#if defined(CONFIG_M5206eLITE) -#define MEM_SIZE 0x00100000 /* 1MiB default memory */ -#endif -#if defined(CONFIG_MOD5272) -#define MEM_SIZE 0x00800000 /* 8MiB default memory */ -#endif -#endif /* CONFIG_RAMAUTO */ - - -/* - * If we don't have a fixed memory size now, then lets build in code - * to auto detect the DRAM size. Obviously this is the prefered - * method, and should work for most boards (it won't work for those - * that do not have their RAM starting at address 0). - */ -#if defined(MEM_SIZE) -.macro GET_MEM_SIZE - movel #MEM_SIZE,%d0 /* hard coded memory size */ -.endm - -#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \ - defined(CONFIG_M5249) || defined(CONFIG_M527x) || \ - defined(CONFIG_M528x) || defined(CONFIG_M5307) || \ - defined(CONFIG_M5407) -/* - * Not all these devices have exactly the same DRAM controller, - * but the DCMR register is virtually identical - give or take - * a couple of bits. The only exception is the 5272 devices, their - * DRAM controller is quite different. - */ -.macro GET_MEM_SIZE - movel MCF_MBAR+MCFSIM_DMR0,%d0 /* get mask for 1st bank */ - btst #0,%d0 /* check if region enabled */ - beq 1f - andl #0xfffc0000,%d0 - beq 1f - addl #0x00040000,%d0 /* convert mask to size */ -1: - movel MCF_MBAR+MCFSIM_DMR1,%d1 /* get mask for 2nd bank */ - btst #0,%d1 /* check if region enabled */ - beq 2f - andl #0xfffc0000, %d1 - beq 2f - addl #0x00040000,%d1 - addl %d1,%d0 /* total mem size in d0 */ -2: -.endm - -#elif defined(CONFIG_M5272) -.macro GET_MEM_SIZE - movel MCF_MBAR+MCFSIM_CSOR7,%d0 /* get SDRAM address mask */ - andil #0xfffff000,%d0 /* mask out chip select options */ - negl %d0 /* negate bits */ -.endm - -#else -#error "ERROR: I don't know how to determine your boards memory size?" -#endif - - -/* - * Most ColdFire boards have their DRAM starting at address 0. - * Notable exception is the 5206eLITE board, another is the MOD5272. - */ -#if defined(CONFIG_M5206eLITE) -#define MEM_BASE 0x30000000 -#endif -#if defined(CONFIG_MOD5272) -#define MEM_BASE 0x02000000 -#define VBR_BASE 0x20000000 /* vectors in SRAM */ -#endif -#if defined(CONFIG_M5208EVB) -#define MEM_BASE 0x40000000 -#endif - -#ifndef MEM_BASE -#define MEM_BASE 0x00000000 /* memory base at address 0 */ -#endif - -/* - * The default location for the vectors is at the base of RAM. - * Some boards might like to use internal SRAM or something like - * that. If no board specific header defines an alternative then - * use the base of RAM. - */ -#ifndef VBR_BASE -#define VBR_BASE MEM_BASE /* vector address */ -#endif - -/*****************************************************************************/ - -/* - * Boards and platforms can do specific early hardware setup if - * they need to. Most don't need this, define away if not required. - */ -#ifndef PLATFORM_SETUP -#define PLATFORM_SETUP -#endif - -/*****************************************************************************/ - -.global _start -.global _rambase -.global _ramvec -.global _ramstart -.global _ramend - -/*****************************************************************************/ - -.data - -/* - * During startup we store away the RAM setup. These are not in the - * bss, since their values are determined and written before the bss - * has been cleared. - */ -_rambase: -.long 0 -_ramvec: -.long 0 -_ramstart: -.long 0 -_ramend: -.long 0 - -/*****************************************************************************/ - -.text - -/* - * This is the codes first entry point. This is where it all - * begins... - */ - -_start: - nop /* filler */ - movew #0x2700, %sr /* no interrupts */ - - /* - * Do any platform or board specific setup now. Most boards - * don't need anything. Those exceptions are define this in - * their board specific includes. - */ - PLATFORM_SETUP - - /* - * Create basic memory configuration. Set VBR accordingly, - * and size memory. - */ - movel #VBR_BASE,%a7 - movec %a7,%VBR /* set vectors addr */ - movel %a7,_ramvec - - movel #MEM_BASE,%a7 /* mark the base of RAM */ - movel %a7,_rambase - - GET_MEM_SIZE /* macro code determines size */ - addl %a7,%d0 - movel %d0,_ramend /* set end ram addr */ - - /* - * Now that we know what the memory is, lets enable cache - * and get things moving. This is Coldfire CPU specific. - */ - CACHE_ENABLE /* enable CPU cache */ - - -#ifdef CONFIG_ROMFS_FS - /* - * Move ROM filesystem above bss :-) - */ - lea _sbss,%a0 /* get start of bss */ - lea _ebss,%a1 /* set up destination */ - movel %a0,%a2 /* copy of bss start */ - - movel 8(%a0),%d0 /* get size of ROMFS */ - addql #8,%d0 /* allow for rounding */ - andl #0xfffffffc, %d0 /* whole words */ - - addl %d0,%a0 /* copy from end */ - addl %d0,%a1 /* copy from end */ - movel %a1,_ramstart /* set start of ram */ - -_copy_romfs: - movel -(%a0),%d0 /* copy dword */ - movel %d0,-(%a1) - cmpl %a0,%a2 /* check if at end */ - bne _copy_romfs - -#else /* CONFIG_ROMFS_FS */ - lea _ebss,%a1 - movel %a1,_ramstart -#endif /* CONFIG_ROMFS_FS */ - - - /* - * Zero out the bss region. - */ - lea _sbss,%a0 /* get start of bss */ - lea _ebss,%a1 /* get end of bss */ - clrl %d0 /* set value */ -_clear_bss: - movel %d0,(%a0)+ /* clear each word */ - cmpl %a0,%a1 /* check if at end */ - bne _clear_bss - - /* - * Load the current task pointer and stack. - */ - lea init_thread_union,%a0 - lea THREAD_SIZE(%a0),%sp - - /* - * Assember start up done, start code proper. - */ - jsr start_kernel /* start Linux kernel */ - -_exit: - jmp _exit /* should never get here */ - -/*****************************************************************************/ |