2 files changed, 0 insertions, 185 deletions
diff --git a/arch/m68knommu/platform/528x/Makefile b/arch/m68knommu/platform/528x/Makefile
deleted file mode 100644
index 26135d92b34..00000000000
--- a/arch/m68knommu/platform/528x/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-#
-# If you want to play with the HW breakpoints then you will
-# need to add define this,  which will give you a stack backtrace
-# on the console port whenever a DBG interrupt occurs.  You have to
-# set up you HW breakpoints to trigger a DBG interrupt:
-#
-# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT
-# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
-#
-
-asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
-
-obj-y := config.o
-
diff --git a/arch/m68knommu/platform/528x/config.c b/arch/m68knommu/platform/528x/config.c
deleted file mode 100644
index 44baeb225dc..00000000000
--- a/arch/m68knommu/platform/528x/config.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/***************************************************************************/
-
-/*
- *	linux/arch/m68knommu/platform/528x/config.c
- *
- *	Sub-architcture dependant initialization code for the Motorola
- *	5280 and 5282 CPUs.
- *
- *	Copyright (C) 1999-2003, Greg Ungerer (gerg@snapgear.com)
- *	Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
- */
-
-/***************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/io.h>
-#include <asm/machdep.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfuart.h>
-
-#ifdef CONFIG_MTD_PARTITIONS
-#include <linux/mtd/partitions.h>
-#endif
-
-/***************************************************************************/
-
-void coldfire_reset(void);
-
-/***************************************************************************/
-
-static struct mcf_platform_uart m528x_uart_platform[] = {
-	{
-		.mapbase	= MCF_MBAR + MCFUART_BASE1,
-		.irq		= MCFINT_VECBASE + MCFINT_UART0,
-	},
-	{
-		.mapbase 	= MCF_MBAR + MCFUART_BASE2,
-		.irq		= MCFINT_VECBASE + MCFINT_UART0 + 1,
-	},
-	{
-		.mapbase 	= MCF_MBAR + MCFUART_BASE3,
-		.irq		= MCFINT_VECBASE + MCFINT_UART0 + 2,
-	},
-	{ },
-};
-
-static struct platform_device m528x_uart = {
-	.name			= "mcfuart",
-	.id			= 0,
-	.dev.platform_data	= m528x_uart_platform,
-};
-
-static struct platform_device *m528x_devices[] __initdata = {
-	&m528x_uart,
-};
-
-/***************************************************************************/
-
-#define	INTC0	(MCF_MBAR + MCFICM_INTC0)
-
-static void __init m528x_uart_init_line(int line, int irq)
-{
-	u8 port;
-	u32 imr;
-
-	if ((line < 0) || (line > 2))
-		return;
-
-	/* level 6, line based priority */
-	writeb(0x30+line, INTC0 + MCFINTC_ICR0 + MCFINT_UART0 + line);
-
-	imr = readl(INTC0 + MCFINTC_IMRL);
-	imr &= ~((1 << (irq - MCFINT_VECBASE)) | 1);
-	writel(imr, INTC0 + MCFINTC_IMRL);
-
-	/* make sure PUAPAR is set for UART0 and UART1 */
-	if (line < 2) {
-		port = readb(MCF_MBAR + MCF5282_GPIO_PUAPAR);
-		port |= (0x03 << (line * 2));
-		writeb(port, MCF_MBAR + MCF5282_GPIO_PUAPAR);
-	}
-}
-
-static void __init m528x_uarts_init(void)
-{
-	const int nrlines = ARRAY_SIZE(m528x_uart_platform);
-	int line;
-
-	for (line = 0; (line < nrlines); line++)
-		m528x_uart_init_line(line, m528x_uart_platform[line].irq);
-}
-
-/***************************************************************************/
-
-void mcf_disableall(void)
-{
-	*((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH)) = 0xffffffff;
-	*((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL)) = 0xffffffff;
-}
-
-/***************************************************************************/
-
-void mcf_autovector(unsigned int vec)
-{
-	/* Everything is auto-vectored on the 5272 */
-}
-
-/***************************************************************************/
-
-#ifdef CONFIG_WILDFIRE
-void wildfire_halt(void)
-{
-	writeb(0, 0x30000007);
-	writeb(0x2, 0x30000007);
-}
-#endif
-
-#ifdef CONFIG_WILDFIREMOD
-void wildfiremod_halt(void)
-{
-	printk(KERN_INFO "WildFireMod hibernating...\n");
-
-	/* Set portE.5 to Digital IO */
-	MCF5282_GPIO_PEPAR &= ~(1 << (5 * 2));
-
-	/* Make portE.5 an output */
-	MCF5282_GPIO_DDRE |= (1 << 5);
-
-	/* Now toggle portE.5 from low to high */
-	MCF5282_GPIO_PORTE &= ~(1 << 5);
-	MCF5282_GPIO_PORTE |= (1 << 5);
-
-	printk(KERN_EMERG "Failed to hibernate. Halting!\n");
-}
-#endif
-
-void __init config_BSP(char *commandp, int size)
-{
-	mcf_disableall();
-
-#ifdef CONFIG_WILDFIRE
-	mach_halt = wildfire_halt;
-#endif
-#ifdef CONFIG_WILDFIREMOD
-	mach_halt = wildfiremod_halt;
-#endif
-}
-
-/***************************************************************************/
-
-static int __init init_BSP(void)
-{
-	m528x_uarts_init();
-	platform_add_devices(m528x_devices, ARRAY_SIZE(m528x_devices));
-	return 0;
-}
-
-arch_initcall(init_BSP);
-
-/***************************************************************************/