diff options
Diffstat (limited to 'arch/m68knommu/kernel/vmlinux.lds.S')
| -rw-r--r-- | arch/m68knommu/kernel/vmlinux.lds.S | 374 |
1 files changed, 0 insertions, 374 deletions
diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S deleted file mode 100644 index ac9de2661c0..00000000000 --- a/arch/m68knommu/kernel/vmlinux.lds.S +++ /dev/null @@ -1,374 +0,0 @@ -/* - * vmlinux.lds.S -- master linker script for m68knommu arch - * - * (C) Copyright 2002-2004, Greg Ungerer <gerg@snapgear.com> - * - * This ends up looking compilcated, because of the number of - * address variations for ram and rom/flash layouts. The real - * work of the linker script is all at the end, and reasonably - * strait forward. - */ - -#include <linux/config.h> -#include <asm-generic/vmlinux.lds.h> - -/* - * Original Palm pilot (same for Xcopilot). - * There is really only a rom target for this. - */ -#ifdef CONFIG_PILOT3 -#define ROMVEC_START 0x10c00000 -#define ROMVEC_LENGTH 0x10400 -#define ROM_START 0x10c10400 -#define ROM_LENGTH 0xfec00 -#define ROM_END 0x10d00000 -#define RAMVEC_START 0x00000000 -#define RAMVEC_LENGTH 0x400 -#define RAM_START 0x10000400 -#define RAM_LENGTH 0xffc00 -#define RAM_END 0x10100000 -#define _ramend _ram_end_notused -#define DATA_ADDR RAM_START -#endif - -/* - * Same setup on both the uCsimm and uCdimm. - */ -#if defined(CONFIG_UCSIMM) || defined(CONFIG_UCDIMM) -#ifdef CONFIG_RAMKERNEL -#define ROMVEC_START 0x10c10000 -#define ROMVEC_LENGTH 0x400 -#define ROM_START 0x10c10400 -#define ROM_LENGTH 0x1efc00 -#define ROM_END 0x10e00000 -#define RAMVEC_START 0x00000000 -#define RAMVEC_LENGTH 0x400 -#define RAM_START 0x00020400 -#define RAM_LENGTH 0x7dfc00 -#define RAM_END 0x00800000 -#endif -#ifdef CONFIG_ROMKERNEL -#define ROMVEC_START 0x10c10000 -#define ROMVEC_LENGTH 0x400 -#define ROM_START 0x10c10400 -#define ROM_LENGTH 0x1efc00 -#define ROM_END 0x10e00000 -#define RAMVEC_START 0x00000000 -#define RAMVEC_LENGTH 0x400 -#define RAM_START 0x00020000 -#define RAM_LENGTH 0x600000 -#define RAM_END 0x00800000 -#endif -#ifdef CONFIG_HIMEMKERNEL -#define ROMVEC_START 0x00600000 -#define ROMVEC_LENGTH 0x400 -#define ROM_START 0x00600400 -#define ROM_LENGTH 0x1efc00 -#define ROM_END 0x007f0000 -#define RAMVEC_START 0x00000000 -#define RAMVEC_LENGTH 0x400 -#define RAM_START 0x00020000 -#define RAM_LENGTH 0x5e0000 -#define RAM_END 0x00600000 -#endif -#endif - -#ifdef CONFIG_DRAGEN2 -#define RAM_START 0x10000 -#define RAM_LENGTH 0x7f0000 -#endif - -#ifdef CONFIG_UCQUICC -#define ROMVEC_START 0x00000000 -#define ROMVEC_LENGTH 0x404 -#define ROM_START 0x00000404 -#define ROM_LENGTH 0x1ff6fc -#define ROM_END 0x00200000 -#define RAMVEC_START 0x00200000 -#define RAMVEC_LENGTH 0x404 -#define RAM_START 0x00200404 -#define RAM_LENGTH 0x1ff6fc -#define RAM_END 0x00400000 -#endif - -/* - * The standard Arnewsh 5206 board only has 1MiB of ram. Not normally - * enough to be useful. Assume the user has fitted something larger, - * at least 4MiB in size. No point in not letting the kernel completely - * link, it will be obvious if it is too big when they go to load it. - */ -#if defined(CONFIG_ARN5206) -#define RAM_START 0x10000 -#define RAM_LENGTH 0x3f0000 -#endif - -/* - * The Motorola 5206eLITE board only has 1MiB of static RAM. - */ -#if defined(CONFIG_ELITE) -#define RAM_START 0x30020000 -#define RAM_LENGTH 0xe0000 -#endif - -/* - * All the Motorola eval boards have the same basic arrangement. - * The end of RAM will vary depending on how much ram is fitted, - * but this isn't important here, we assume at least 4MiB. - */ -#if defined(CONFIG_M5206eC3) || defined(CONFIG_M5249C3) || \ - defined(CONFIG_M5272C3) || defined(CONFIG_M5307C3) || \ - defined(CONFIG_ARN5307) || defined(CONFIG_M5407C3) || \ - defined(CONFIG_M5271EVB) || defined(CONFIG_M5275EVB) || \ - defined(CONFIG_M5235EVB) -#define RAM_START 0x20000 -#define RAM_LENGTH 0x3e0000 -#endif - -/* - * The Freescale 5208EVB board has 32MB of RAM. - */ -#if defined(CONFIG_M5208EVB) -#define RAM_START 0x40020000 -#define RAM_LENGTH 0x01fe0000 -#endif - -/* - * The senTec COBRA5272 board has nearly the same memory layout as - * the M5272C3. We assume 16MiB ram. - */ -#if defined(CONFIG_COBRA5272) -#define RAM_START 0x20000 -#define RAM_LENGTH 0xfe0000 -#endif - -#if defined(CONFIG_M5282EVB) -#define RAM_START 0x10000 -#define RAM_LENGTH 0x3f0000 -#endif - -/* - * The senTec COBRA5282 board has the same memory layout as the M5282EVB. - */ -#if defined(CONFIG_COBRA5282) -#define RAM_START 0x10000 -#define RAM_LENGTH 0x3f0000 -#endif - - -/* - * The EMAC SoM-5282EM module. - */ -#if defined(CONFIG_SOM5282EM) -#define RAM_START 0x10000 -#define RAM_LENGTH 0xff0000 -#endif - - -/* - * These flash boot boards use all of ram for operation. Again the - * actual memory size is not important here, assume at least 4MiB. - * They currently have no support for running in flash. - */ -#if defined(CONFIG_NETtel) || defined(CONFIG_eLIA) || \ - defined(CONFIG_DISKtel) || defined(CONFIG_SECUREEDGEMP3) || \ - defined(CONFIG_HW_FEITH) -#define RAM_START 0x400 -#define RAM_LENGTH 0x3ffc00 -#endif - -/* - * Sneha Boards mimimun memory - * The end of RAM will vary depending on how much ram is fitted, - * but this isn't important here, we assume at least 4MiB. - */ -#if defined(CONFIG_CPU16B) -#define RAM_START 0x20000 -#define RAM_LENGTH 0x3e0000 -#endif - -#if defined(CONFIG_MOD5272) -#define RAM_START 0x02000000 -#define RAM_LENGTH 0x00800000 -#define RAMVEC_START 0x20000000 -#define RAMVEC_LENGTH 0x00000400 -#endif - -#if defined(CONFIG_RAMKERNEL) -#define TEXT ram -#define DATA ram -#define INIT ram -#define BSS ram -#endif -#if defined(CONFIG_ROMKERNEL) || defined(CONFIG_HIMEMKERNEL) -#define TEXT rom -#define DATA ram -#define INIT ram -#define BSS ram -#endif - -#ifndef DATA_ADDR -#define DATA_ADDR -#endif - - -OUTPUT_ARCH(m68k) -ENTRY(_start) - -MEMORY { -#ifdef RAMVEC_START - ramvec : ORIGIN = RAMVEC_START, LENGTH = RAMVEC_LENGTH -#endif - ram : ORIGIN = RAM_START, LENGTH = RAM_LENGTH -#ifdef RAM_END - eram : ORIGIN = RAM_END, LENGTH = 0 -#endif -#ifdef ROM_START - romvec : ORIGIN = ROMVEC_START, LENGTH = ROMVEC_LENGTH - rom : ORIGIN = ROM_START, LENGTH = ROM_LENGTH - erom : ORIGIN = ROM_END, LENGTH = 0 -#endif -} - -jiffies = jiffies_64 + 4; - -SECTIONS { - -#ifdef ROMVEC_START - . = ROMVEC_START ; - .romvec : { - __rom_start = . ; - _romvec = .; - *(.data.initvect) - } > romvec -#endif - - .text : { - _stext = . ; - *(.text) - SCHED_TEXT - *(.text.lock) - - . = ALIGN(16); /* Exception table */ - __start___ex_table = .; - *(__ex_table) - __stop___ex_table = .; - - *(.rodata) *(.rodata.*) - *(__vermagic) /* Kernel version magic */ - *(.rodata1) - *(.rodata.str1.1) - - /* Kernel symbol table: Normal symbols */ - . = ALIGN(4); - __start___ksymtab = .; - *(__ksymtab) - __stop___ksymtab = .; - - /* Kernel symbol table: GPL-only symbols */ - __start___ksymtab_gpl = .; - *(__ksymtab_gpl) - __stop___ksymtab_gpl = .; - - /* Kernel symbol table: Normal symbols */ - __start___kcrctab = .; - *(__kcrctab) - __stop___kcrctab = .; - - /* Kernel symbol table: GPL-only symbols */ - __start___kcrctab_gpl = .; - *(__kcrctab_gpl) - __stop___kcrctab_gpl = .; - - /* Kernel symbol table: strings */ - *(__ksymtab_strings) - - /* Built-in module parameters */ - . = ALIGN(4) ; - __start___param = .; - *(__param) - __stop___param = .; - - . = ALIGN(4) ; - _etext = . ; - } > TEXT - -#ifdef ROM_END - . = ROM_END ; - .erom : { - __rom_end = . ; - } > erom -#endif -#ifdef RAMVEC_START - . = RAMVEC_START ; - .ramvec : { - __ramvec = .; - } > ramvec -#endif - - .data DATA_ADDR : { - . = ALIGN(4); - _sdata = . ; - *(.data) - . = ALIGN(8192) ; - *(.data.init_task) - _edata = . ; - } > DATA - - .init : { - . = ALIGN(4096); - __init_begin = .; - _sinittext = .; - *(.init.text) - _einittext = .; - *(.init.data) - . = ALIGN(16); - __setup_start = .; - *(.init.setup) - __setup_end = .; - __initcall_start = .; - *(.initcall1.init) - *(.initcall2.init) - *(.initcall3.init) - *(.initcall4.init) - *(.initcall5.init) - *(.initcall6.init) - *(.initcall7.init) - __initcall_end = .; - __con_initcall_start = .; - *(.con_initcall.init) - __con_initcall_end = .; - __security_initcall_start = .; - *(.security_initcall.init) - __security_initcall_end = .; - . = ALIGN(4); - __initramfs_start = .; - *(.init.ramfs) - __initramfs_end = .; - . = ALIGN(4096); - __init_end = .; - } > INIT - - /DISCARD/ : { - *(.exit.text) - *(.exit.data) - *(.exitcall.exit) - } - - .bss : { - . = ALIGN(4); - _sbss = . ; - *(.bss) - *(COMMON) - . = ALIGN(4) ; - _ebss = . ; - } > BSS - -#ifdef RAM_END - . = RAM_END ; - .eram : { - __ramend = . ; - _ramend = . ; - } > eram -#endif -} - |