diff options
Diffstat (limited to 'arch/m68k/include/asm/m527xsim.h')
| -rw-r--r-- | arch/m68k/include/asm/m527xsim.h | 206 |
1 files changed, 151 insertions, 55 deletions
diff --git a/arch/m68k/include/asm/m527xsim.h b/arch/m68k/include/asm/m527xsim.h index 1feb46f108c..1bebbe78055 100644 --- a/arch/m68k/include/asm/m527xsim.h +++ b/arch/m68k/include/asm/m527xsim.h @@ -11,12 +11,18 @@ #define m527xsim_h /****************************************************************************/ +#define CPU_NAME "COLDFIRE(m527x)" +#define CPU_INSTR_PER_JIFFY 3 +#define MCF_BUSCLK (MCF_CLK / 2) + +#include <asm/m52xxacr.h> /* * Define the 5270/5271 SIM register set addresses. */ -#define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */ -#define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 1 */ +#define MCFICM_INTC0 (MCF_IPSBAR + 0x0c00) /* Base for Interrupt Ctrl 0 */ +#define MCFICM_INTC1 (MCF_IPSBAR + 0x0d00) /* Base for Interrupt Ctrl 1 */ + #define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */ #define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */ #define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */ @@ -32,30 +38,96 @@ #define MCFINT_UART1 14 /* Interrupt number for UART1 */ #define MCFINT_UART2 15 /* Interrupt number for UART2 */ #define MCFINT_QSPI 18 /* Interrupt number for QSPI */ +#define MCFINT_FECRX0 23 /* Interrupt number for FEC0 */ +#define MCFINT_FECTX0 27 /* Interrupt number for FEC0 */ +#define MCFINT_FECENTC0 29 /* Interrupt number for FEC0 */ #define MCFINT_PIT1 36 /* Interrupt number for PIT1 */ +#define MCFINT2_VECBASE 128 /* Vector base number 2 */ +#define MCFINT2_FECRX1 23 /* Interrupt number for FEC1 */ +#define MCFINT2_FECTX1 27 /* Interrupt number for FEC1 */ +#define MCFINT2_FECENTC1 29 /* Interrupt number for FEC1 */ + +#define MCF_IRQ_UART0 (MCFINT_VECBASE + MCFINT_UART0) +#define MCF_IRQ_UART1 (MCFINT_VECBASE + MCFINT_UART1) +#define MCF_IRQ_UART2 (MCFINT_VECBASE + MCFINT_UART2) + +#define MCF_IRQ_FECRX0 (MCFINT_VECBASE + MCFINT_FECRX0) +#define MCF_IRQ_FECTX0 (MCFINT_VECBASE + MCFINT_FECTX0) +#define MCF_IRQ_FECENTC0 (MCFINT_VECBASE + MCFINT_FECENTC0) +#define MCF_IRQ_FECRX1 (MCFINT2_VECBASE + MCFINT2_FECRX1) +#define MCF_IRQ_FECTX1 (MCFINT2_VECBASE + MCFINT2_FECTX1) +#define MCF_IRQ_FECENTC1 (MCFINT2_VECBASE + MCFINT2_FECENTC1) + +#define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI) +#define MCF_IRQ_PIT1 (MCFINT_VECBASE + MCFINT_PIT1) + /* * SDRAM configuration registers. */ #ifdef CONFIG_M5271 -#define MCFSIM_DCR 0x40 /* SDRAM control */ -#define MCFSIM_DACR0 0x48 /* SDRAM base address 0 */ -#define MCFSIM_DMR0 0x4c /* SDRAM address mask 0 */ -#define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */ -#define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */ +#define MCFSIM_DCR (MCF_IPSBAR + 0x40) /* Control */ +#define MCFSIM_DACR0 (MCF_IPSBAR + 0x48) /* Base address 0 */ +#define MCFSIM_DMR0 (MCF_IPSBAR + 0x4c) /* Address mask 0 */ +#define MCFSIM_DACR1 (MCF_IPSBAR + 0x50) /* Base address 1 */ +#define MCFSIM_DMR1 (MCF_IPSBAR + 0x54) /* Address mask 1 */ #endif #ifdef CONFIG_M5275 -#define MCFSIM_DMR 0x40 /* SDRAM mode */ -#define MCFSIM_DCR 0x44 /* SDRAM control */ -#define MCFSIM_DCFG1 0x48 /* SDRAM configuration 1 */ -#define MCFSIM_DCFG2 0x4c /* SDRAM configuration 2 */ -#define MCFSIM_DBAR0 0x50 /* SDRAM base address 0 */ -#define MCFSIM_DMR0 0x54 /* SDRAM address mask 0 */ -#define MCFSIM_DBAR1 0x58 /* SDRAM base address 1 */ -#define MCFSIM_DMR1 0x5c /* SDRAM address mask 1 */ +#define MCFSIM_DMR (MCF_IPSBAR + 0x40) /* Mode */ +#define MCFSIM_DCR (MCF_IPSBAR + 0x44) /* Control */ +#define MCFSIM_DCFG1 (MCF_IPSBAR + 0x48) /* Configuration 1 */ +#define MCFSIM_DCFG2 (MCF_IPSBAR + 0x4c) /* Configuration 2 */ +#define MCFSIM_DBAR0 (MCF_IPSBAR + 0x50) /* Base address 0 */ +#define MCFSIM_DMR0 (MCF_IPSBAR + 0x54) /* Address mask 0 */ +#define MCFSIM_DBAR1 (MCF_IPSBAR + 0x58) /* Base address 1 */ +#define MCFSIM_DMR1 (MCF_IPSBAR + 0x5c) /* Address mask 1 */ #endif +/* + * DMA unit base addresses. + */ +#define MCFDMA_BASE0 (MCF_IPSBAR + 0x100) +#define MCFDMA_BASE1 (MCF_IPSBAR + 0x140) +#define MCFDMA_BASE2 (MCF_IPSBAR + 0x180) +#define MCFDMA_BASE3 (MCF_IPSBAR + 0x1C0) + +/* + * UART module. + */ +#define MCFUART_BASE0 (MCF_IPSBAR + 0x200) +#define MCFUART_BASE1 (MCF_IPSBAR + 0x240) +#define MCFUART_BASE2 (MCF_IPSBAR + 0x280) + +/* + * FEC ethernet module. + */ +#define MCFFEC_BASE0 (MCF_IPSBAR + 0x1000) +#define MCFFEC_SIZE0 0x800 +#define MCFFEC_BASE1 (MCF_IPSBAR + 0x1800) +#define MCFFEC_SIZE1 0x800 + +/* + * QSPI module. + */ +#define MCFQSPI_BASE (MCF_IPSBAR + 0x340) +#define MCFQSPI_SIZE 0x40 + +#ifdef CONFIG_M5271 +#define MCFQSPI_CS0 91 +#define MCFQSPI_CS1 92 +#define MCFQSPI_CS2 99 +#define MCFQSPI_CS3 103 +#endif +#ifdef CONFIG_M5275 +#define MCFQSPI_CS0 59 +#define MCFQSPI_CS1 60 +#define MCFQSPI_CS2 61 +#define MCFQSPI_CS3 62 +#endif +/* + * GPIO module. + */ #ifdef CONFIG_M5271 #define MCFGPIO_PODR_ADDR (MCF_IPSBAR + 0x100000) #define MCFGPIO_PODR_DATAH (MCF_IPSBAR + 0x100001) @@ -112,19 +184,33 @@ /* * Generic GPIO support */ -#define MCFGPIO_PODR MCFGPIO_PODR_ADDR -#define MCFGPIO_PDDR MCFGPIO_PDDR_ADDR -#define MCFGPIO_PPDR MCFGPIO_PPDSDR_ADDR -#define MCFGPIO_SETR MCFGPIO_PPDSDR_ADDR -#define MCFGPIO_CLRR MCFGPIO_PCLRR_ADDR +#define MCFGPIO_PODR MCFGPIO_PODR_ADDR +#define MCFGPIO_PDDR MCFGPIO_PDDR_ADDR +#define MCFGPIO_PPDR MCFGPIO_PPDSDR_ADDR +#define MCFGPIO_SETR MCFGPIO_PPDSDR_ADDR +#define MCFGPIO_CLRR MCFGPIO_PCLRR_ADDR -#define MCFGPIO_PIN_MAX 100 -#define MCFGPIO_IRQ_MAX 8 -#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE +#define MCFGPIO_PIN_MAX 100 +#define MCFGPIO_IRQ_MAX 8 +#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE +/* + * Port Pin Assignment registers. + */ +#define MCFGPIO_PAR_AD (MCF_IPSBAR + 0x100040) +#define MCFGPIO_PAR_BUSCTL (MCF_IPSBAR + 0x100042) +#define MCFGPIO_PAR_BS (MCF_IPSBAR + 0x100044) +#define MCFGPIO_PAR_CS (MCF_IPSBAR + 0x100045) +#define MCFGPIO_PAR_SDRAM (MCF_IPSBAR + 0x100046) +#define MCFGPIO_PAR_FECI2C (MCF_IPSBAR + 0x100047) +#define MCFGPIO_PAR_UART (MCF_IPSBAR + 0x100048) #define MCFGPIO_PAR_QSPI (MCF_IPSBAR + 0x10004A) #define MCFGPIO_PAR_TIMER (MCF_IPSBAR + 0x10004C) -#endif + +#define UART0_ENABLE_MASK 0x000f +#define UART1_ENABLE_MASK 0x0ff0 +#define UART2_ENABLE_MASK 0x3000 +#endif /* CONFIG_M5271 */ #ifdef CONFIG_M5275 #define MCFGPIO_PODR_BUSCTL (MCF_IPSBAR + 0x100004) @@ -207,50 +293,60 @@ /* * Generic GPIO support */ -#define MCFGPIO_PODR MCFGPIO_PODR_BUSCTL -#define MCFGPIO_PDDR MCFGPIO_PDDR_BUSCTL -#define MCFGPIO_PPDR MCFGPIO_PPDSDR_BUSCTL -#define MCFGPIO_SETR MCFGPIO_PPDSDR_BUSCTL -#define MCFGPIO_CLRR MCFGPIO_PCLRR_BUSCTL +#define MCFGPIO_PODR MCFGPIO_PODR_BUSCTL +#define MCFGPIO_PDDR MCFGPIO_PDDR_BUSCTL +#define MCFGPIO_PPDR MCFGPIO_PPDSDR_BUSCTL +#define MCFGPIO_SETR MCFGPIO_PPDSDR_BUSCTL +#define MCFGPIO_CLRR MCFGPIO_PCLRR_BUSCTL -#define MCFGPIO_PIN_MAX 148 -#define MCFGPIO_IRQ_MAX 8 -#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE +#define MCFGPIO_PIN_MAX 148 +#define MCFGPIO_IRQ_MAX 8 +#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE +/* + * Port Pin Assignment registers. + */ +#define MCFGPIO_PAR_AD (MCF_IPSBAR + 0x100070) +#define MCFGPIO_PAR_CS (MCF_IPSBAR + 0x100071) +#define MCFGPIO_PAR_BUSCTL (MCF_IPSBAR + 0x100072) +#define MCFGPIO_PAR_USB (MCF_IPSBAR + 0x100076) +#define MCFGPIO_PAR_FEC0HL (MCF_IPSBAR + 0x100078) +#define MCFGPIO_PAR_FEC1HL (MCF_IPSBAR + 0x100079) +#define MCFGPIO_PAR_TIMER (MCF_IPSBAR + 0x10007A) +#define MCFGPIO_PAR_UART (MCF_IPSBAR + 0x10007C) #define MCFGPIO_PAR_QSPI (MCF_IPSBAR + 0x10007E) -#endif +#define MCFGPIO_PAR_SDRAM (MCF_IPSBAR + 0x100080) +#define MCFGPIO_PAR_FECI2C (MCF_IPSBAR + 0x100082) +#define MCFGPIO_PAR_BS (MCF_IPSBAR + 0x100084) + +#define UART0_ENABLE_MASK 0x000f +#define UART1_ENABLE_MASK 0x00f0 +#define UART2_ENABLE_MASK 0x3f00 +#endif /* CONFIG_M5275 */ /* - * EPort + * PIT timer base addresses. */ +#define MCFPIT_BASE1 (MCF_IPSBAR + 0x150000) +#define MCFPIT_BASE2 (MCF_IPSBAR + 0x160000) +#define MCFPIT_BASE3 (MCF_IPSBAR + 0x170000) +#define MCFPIT_BASE4 (MCF_IPSBAR + 0x180000) +/* + * EPort + */ +#define MCFEPORT_EPPAR (MCF_IPSBAR + 0x130000) #define MCFEPORT_EPDDR (MCF_IPSBAR + 0x130002) +#define MCFEPORT_EPIER (MCF_IPSBAR + 0x130003) #define MCFEPORT_EPDR (MCF_IPSBAR + 0x130004) #define MCFEPORT_EPPDR (MCF_IPSBAR + 0x130005) - - - -/* - * GPIO pins setups to enable the UARTs. - */ -#ifdef CONFIG_M5271 -#define MCF_GPIO_PAR_UART 0x100048 /* PAR UART address */ -#define UART0_ENABLE_MASK 0x000f -#define UART1_ENABLE_MASK 0x0ff0 -#define UART2_ENABLE_MASK 0x3000 -#endif -#ifdef CONFIG_M5275 -#define MCF_GPIO_PAR_UART 0x10007c /* PAR UART address */ -#define UART0_ENABLE_MASK 0x000f -#define UART1_ENABLE_MASK 0x00f0 -#define UART2_ENABLE_MASK 0x3f00 -#endif +#define MCFEPORT_EPFR (MCF_IPSBAR + 0x130006) /* - * Reset Controll Unit (relative to IPSBAR). + * Reset Control Unit (relative to IPSBAR). */ -#define MCF_RCR 0x110000 -#define MCF_RSR 0x110001 +#define MCF_RCR (MCF_IPSBAR + 0x110000) +#define MCF_RSR (MCF_IPSBAR + 0x110001) #define MCF_RCR_SWRESET 0x80 /* Software reset bit */ #define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */ |