diff options
Diffstat (limited to 'arch/m68k/atari')
| -rw-r--r-- | arch/m68k/atari/ataints.c | 437 | ||||
| -rw-r--r-- | arch/m68k/atari/atasound.c | 1 | ||||
| -rw-r--r-- | arch/m68k/atari/config.c | 262 | ||||
| -rw-r--r-- | arch/m68k/atari/debug.c | 6 | ||||
| -rw-r--r-- | arch/m68k/atari/stram.c | 71 | ||||
| -rw-r--r-- | arch/m68k/atari/time.c | 7 |
6 files changed, 497 insertions, 287 deletions
diff --git a/arch/m68k/atari/ataints.c b/arch/m68k/atari/ataints.c index 26a804e67bc..3d2b63bedf0 100644 --- a/arch/m68k/atari/ataints.c +++ b/arch/m68k/atari/ataints.c @@ -41,8 +41,8 @@ #include <linux/init.h> #include <linux/seq_file.h> #include <linux/module.h> +#include <linux/irq.h> -#include <asm/system.h> #include <asm/traps.h> #include <asm/atarihw.h> @@ -50,6 +50,7 @@ #include <asm/atari_stdma.h> #include <asm/irq.h> #include <asm/entry.h> +#include <asm/io.h> /* @@ -60,243 +61,7 @@ * <asm/atariints.h>): Autovector interrupts are 1..7, then follow ST-MFP, * TT-MFP, SCC, and finally VME interrupts. Vector numbers for the latter can * be allocated by atari_register_vme_int(). - * - * Each interrupt can be of three types: - * - * - SLOW: The handler runs with all interrupts enabled, except the one it - * was called by (to avoid reentering). This should be the usual method. - * But it is currently possible only for MFP ints, since only the MFP - * offers an easy way to mask interrupts. - * - * - FAST: The handler runs with all interrupts disabled. This should be used - * only for really fast handlers, that just do actions immediately - * necessary, and let the rest do a bottom half or task queue. - * - * - PRIORITIZED: The handler can be interrupted by higher-level ints - * (greater IPL, no MFP priorities!). This is the method of choice for ints - * which should be slow, but are not from a MFP. - * - * The feature of more than one handler for one int source is still there, but - * only applicable if all handers are of the same type. To not slow down - * processing of ints with only one handler by the chaining feature, the list - * calling function atari_call_irq_list() is only plugged in at the time the - * second handler is registered. - * - * Implementation notes: For fast-as-possible int handling, there are separate - * entry points for each type (slow/fast/prio). The assembler handler calls - * the irq directly in the usual case, no C wrapper is involved. In case of - * multiple handlers, atari_call_irq_list() is registered as handler and calls - * in turn the real irq's. To ease access from assembler level to the irq - * function pointer and accompanying data, these two are stored in a separate - * array, irq_handler[]. The rest of data (type, name) are put into a second - * array, irq_param, that is accessed from C only. For each slow interrupt (32 - * in all) there are separate handler functions, which makes it possible to - * hard-code the MFP register address and value, are necessary to mask the - * int. If there'd be only one generic function, lots of calculations would be - * needed to determine MFP register and int mask from the vector number :-( - * - * Furthermore, slow ints may not lower the IPL below its previous value - * (before the int happened). This is needed so that an int of class PRIO, on - * that this int may be stacked, cannot be reentered. This feature is - * implemented as follows: If the stack frame format is 1 (throwaway), the int - * is not stacked, and the IPL is anded with 0xfbff, resulting in a new level - * 2, which still blocks the HSYNC, but no interrupts of interest. If the - * frame format is 0, the int is nested, and the old IPL value can be found in - * the sr copy in the frame. - */ - -#if 0 - -#define NUM_INT_SOURCES (8 + NUM_ATARI_SOURCES) - -typedef void (*asm_irq_handler)(void); - -struct irqhandler { - irqreturn_t (*handler)(int, void *, struct pt_regs *); - void *dev_id; -}; - -struct irqparam { - unsigned long flags; - const char *devname; -}; - -/* - * Array with irq's and their parameter data. This array is accessed from low - * level assembler code, so an element size of 8 allows usage of index scaling - * addressing mode. */ -static struct irqhandler irq_handler[NUM_INT_SOURCES]; - -/* - * This array hold the rest of parameters of int handlers: type - * (slow,fast,prio) and the name of the handler. These values are only - * accessed from C - */ -static struct irqparam irq_param[NUM_INT_SOURCES]; - -/* check for valid int number (complex, sigh...) */ -#define IS_VALID_INTNO(n) \ - ((n) > 0 && \ - /* autovec and ST-MFP ok anyway */ \ - (((n) < TTMFP_SOURCE_BASE) || \ - /* TT-MFP ok if present */ \ - ((n) >= TTMFP_SOURCE_BASE && (n) < SCC_SOURCE_BASE && \ - ATARIHW_PRESENT(TT_MFP)) || \ - /* SCC ok if present and number even */ \ - ((n) >= SCC_SOURCE_BASE && (n) < VME_SOURCE_BASE && \ - !((n) & 1) && ATARIHW_PRESENT(SCC)) || \ - /* greater numbers ok if they are registered VME vectors */ \ - ((n) >= VME_SOURCE_BASE && (n) < VME_SOURCE_BASE + VME_MAX_SOURCES && \ - free_vme_vec_bitmap & (1 << ((n) - VME_SOURCE_BASE))))) - - -/* - * Here start the assembler entry points for interrupts - */ - -#define IRQ_NAME(nr) atari_slow_irq_##nr##_handler(void) - -#define BUILD_SLOW_IRQ(n) \ -asmlinkage void IRQ_NAME(n); \ -/* Dummy function to allow asm with operands. */ \ -void atari_slow_irq_##n##_dummy (void) { \ -__asm__ (__ALIGN_STR "\n" \ -"atari_slow_irq_" #n "_handler:\t" \ -" addl %6,%5\n" /* preempt_count() += HARDIRQ_OFFSET */ \ - SAVE_ALL_INT "\n" \ - GET_CURRENT(%%d0) "\n" \ -" andb #~(1<<(%c3&7)),%a4:w\n" /* mask this interrupt */ \ - /* get old IPL from stack frame */ \ -" bfextu %%sp@(%c2){#5,#3},%%d0\n" \ -" movew %%sr,%%d1\n" \ -" bfins %%d0,%%d1{#21,#3}\n" \ -" movew %%d1,%%sr\n" /* set IPL = previous value */ \ -" addql #1,%a0\n" \ -" lea %a1,%%a0\n" \ -" pea %%sp@\n" /* push addr of frame */ \ -" movel %%a0@(4),%%sp@-\n" /* push handler data */ \ -" pea (%c3+8)\n" /* push int number */ \ -" movel %%a0@,%%a0\n" \ -" jbsr %%a0@\n" /* call the handler */ \ -" addql #8,%%sp\n" \ -" addql #4,%%sp\n" \ -" orw #0x0600,%%sr\n" \ -" andw #0xfeff,%%sr\n" /* set IPL = 6 again */ \ -" orb #(1<<(%c3&7)),%a4:w\n" /* now unmask the int again */ \ -" jbra ret_from_interrupt\n" \ - : : "i" (&kstat_cpu(0).irqs[n+8]), "i" (&irq_handler[n+8]), \ - "n" (PT_OFF_SR), "n" (n), \ - "i" (n & 8 ? (n & 16 ? &tt_mfp.int_mk_a : &st_mfp.int_mk_a) \ - : (n & 16 ? &tt_mfp.int_mk_b : &st_mfp.int_mk_b)), \ - "m" (preempt_count()), "di" (HARDIRQ_OFFSET) \ -); \ - for (;;); /* fake noreturn */ \ -} - -BUILD_SLOW_IRQ(0); -BUILD_SLOW_IRQ(1); -BUILD_SLOW_IRQ(2); -BUILD_SLOW_IRQ(3); -BUILD_SLOW_IRQ(4); -BUILD_SLOW_IRQ(5); -BUILD_SLOW_IRQ(6); -BUILD_SLOW_IRQ(7); -BUILD_SLOW_IRQ(8); -BUILD_SLOW_IRQ(9); -BUILD_SLOW_IRQ(10); -BUILD_SLOW_IRQ(11); -BUILD_SLOW_IRQ(12); -BUILD_SLOW_IRQ(13); -BUILD_SLOW_IRQ(14); -BUILD_SLOW_IRQ(15); -BUILD_SLOW_IRQ(16); -BUILD_SLOW_IRQ(17); -BUILD_SLOW_IRQ(18); -BUILD_SLOW_IRQ(19); -BUILD_SLOW_IRQ(20); -BUILD_SLOW_IRQ(21); -BUILD_SLOW_IRQ(22); -BUILD_SLOW_IRQ(23); -BUILD_SLOW_IRQ(24); -BUILD_SLOW_IRQ(25); -BUILD_SLOW_IRQ(26); -BUILD_SLOW_IRQ(27); -BUILD_SLOW_IRQ(28); -BUILD_SLOW_IRQ(29); -BUILD_SLOW_IRQ(30); -BUILD_SLOW_IRQ(31); - -asm_irq_handler slow_handlers[32] = { - [0] = atari_slow_irq_0_handler, - [1] = atari_slow_irq_1_handler, - [2] = atari_slow_irq_2_handler, - [3] = atari_slow_irq_3_handler, - [4] = atari_slow_irq_4_handler, - [5] = atari_slow_irq_5_handler, - [6] = atari_slow_irq_6_handler, - [7] = atari_slow_irq_7_handler, - [8] = atari_slow_irq_8_handler, - [9] = atari_slow_irq_9_handler, - [10] = atari_slow_irq_10_handler, - [11] = atari_slow_irq_11_handler, - [12] = atari_slow_irq_12_handler, - [13] = atari_slow_irq_13_handler, - [14] = atari_slow_irq_14_handler, - [15] = atari_slow_irq_15_handler, - [16] = atari_slow_irq_16_handler, - [17] = atari_slow_irq_17_handler, - [18] = atari_slow_irq_18_handler, - [19] = atari_slow_irq_19_handler, - [20] = atari_slow_irq_20_handler, - [21] = atari_slow_irq_21_handler, - [22] = atari_slow_irq_22_handler, - [23] = atari_slow_irq_23_handler, - [24] = atari_slow_irq_24_handler, - [25] = atari_slow_irq_25_handler, - [26] = atari_slow_irq_26_handler, - [27] = atari_slow_irq_27_handler, - [28] = atari_slow_irq_28_handler, - [29] = atari_slow_irq_29_handler, - [30] = atari_slow_irq_30_handler, - [31] = atari_slow_irq_31_handler -}; - -asmlinkage void atari_fast_irq_handler( void ); -asmlinkage void atari_prio_irq_handler( void ); - -/* Dummy function to allow asm with operands. */ -void atari_fast_prio_irq_dummy (void) { -__asm__ (__ALIGN_STR "\n" -"atari_fast_irq_handler:\n\t" - "orw #0x700,%%sr\n" /* disable all interrupts */ -"atari_prio_irq_handler:\n\t" - "addl %3,%2\n\t" /* preempt_count() += HARDIRQ_OFFSET */ - SAVE_ALL_INT "\n\t" - GET_CURRENT(%%d0) "\n\t" - /* get vector number from stack frame and convert to source */ - "bfextu %%sp@(%c1){#4,#10},%%d0\n\t" - "subw #(0x40-8),%%d0\n\t" - "jpl 1f\n\t" - "addw #(0x40-8-0x18),%%d0\n" - "1:\tlea %a0,%%a0\n\t" - "addql #1,%%a0@(%%d0:l:4)\n\t" - "lea irq_handler,%%a0\n\t" - "lea %%a0@(%%d0:l:8),%%a0\n\t" - "pea %%sp@\n\t" /* push frame address */ - "movel %%a0@(4),%%sp@-\n\t" /* push handler data */ - "movel %%d0,%%sp@-\n\t" /* push int number */ - "movel %%a0@,%%a0\n\t" - "jsr %%a0@\n\t" /* and call the handler */ - "addql #8,%%sp\n\t" - "addql #4,%%sp\n\t" - "jbra ret_from_interrupt" - : : "i" (&kstat_cpu(0).irqs), "n" (PT_OFF_FORMATVEC), - "m" (preempt_count()), "di" (HARDIRQ_OFFSET) -); - for (;;); -} -#endif /* * Bitmap for free interrupt vector numbers @@ -318,33 +83,174 @@ __ALIGN_STR "\n\t" extern void atari_microwire_cmd(int cmd); -extern int atari_SCC_reset_done; - -static int atari_startup_irq(unsigned int irq) +static unsigned int atari_irq_startup(struct irq_data *data) { - m68k_irq_startup(irq); + unsigned int irq = data->irq; + + m68k_irq_startup(data); atari_turnon_irq(irq); atari_enable_irq(irq); return 0; } -static void atari_shutdown_irq(unsigned int irq) +static void atari_irq_shutdown(struct irq_data *data) { + unsigned int irq = data->irq; + atari_disable_irq(irq); atari_turnoff_irq(irq); - m68k_irq_shutdown(irq); + m68k_irq_shutdown(data); if (irq == IRQ_AUTO_4) vectors[VEC_INT4] = falcon_hblhandler; } -static struct irq_controller atari_irq_controller = { +static void atari_irq_enable(struct irq_data *data) +{ + atari_enable_irq(data->irq); +} + +static void atari_irq_disable(struct irq_data *data) +{ + atari_disable_irq(data->irq); +} + +static struct irq_chip atari_irq_chip = { .name = "atari", - .lock = __SPIN_LOCK_UNLOCKED(atari_irq_controller.lock), - .startup = atari_startup_irq, - .shutdown = atari_shutdown_irq, - .enable = atari_enable_irq, - .disable = atari_disable_irq, + .irq_startup = atari_irq_startup, + .irq_shutdown = atari_irq_shutdown, + .irq_enable = atari_irq_enable, + .irq_disable = atari_irq_disable, +}; + +/* + * ST-MFP timer D chained interrupts - each driver gets its own timer + * interrupt instance. + */ + +struct mfptimerbase { + volatile struct MFP *mfp; + unsigned char mfp_mask, mfp_data; + unsigned short int_mask; + int handler_irq, mfptimer_irq, server_irq; + char *name; +} stmfp_base = { + .mfp = &st_mfp, + .int_mask = 0x0, + .handler_irq = IRQ_MFP_TIMD, + .mfptimer_irq = IRQ_MFP_TIMER1, + .name = "MFP Timer D" +}; + +static irqreturn_t mfptimer_handler(int irq, void *dev_id) +{ + struct mfptimerbase *base = dev_id; + int mach_irq; + unsigned char ints; + + mach_irq = base->mfptimer_irq; + ints = base->int_mask; + for (; ints; mach_irq++, ints >>= 1) { + if (ints & 1) + generic_handle_irq(mach_irq); + } + return IRQ_HANDLED; +} + + +static void atari_mfptimer_enable(struct irq_data *data) +{ + int mfp_num = data->irq - IRQ_MFP_TIMER1; + stmfp_base.int_mask |= 1 << mfp_num; + atari_enable_irq(IRQ_MFP_TIMD); +} + +static void atari_mfptimer_disable(struct irq_data *data) +{ + int mfp_num = data->irq - IRQ_MFP_TIMER1; + stmfp_base.int_mask &= ~(1 << mfp_num); + if (!stmfp_base.int_mask) + atari_disable_irq(IRQ_MFP_TIMD); +} + +static struct irq_chip atari_mfptimer_chip = { + .name = "timer_d", + .irq_enable = atari_mfptimer_enable, + .irq_disable = atari_mfptimer_disable, +}; + + +/* + * EtherNAT CPLD interrupt handling + * CPLD interrupt register is at phys. 0x80000023 + * Need this mapped in at interrupt startup time + * Possibly need this mapped on demand anyway - + * EtherNAT USB driver needs to disable IRQ before + * startup! + */ + +static unsigned char *enat_cpld; + +static unsigned int atari_ethernat_startup(struct irq_data *data) +{ + int enat_num = 140 - data->irq + 1; + + m68k_irq_startup(data); + /* + * map CPLD interrupt register + */ + if (!enat_cpld) + enat_cpld = (unsigned char *)ioremap((ATARI_ETHERNAT_PHYS_ADDR+0x23), 0x2); + /* + * do _not_ enable the USB chip interrupt here - causes interrupt storm + * and triggers dead interrupt watchdog + * Need to reset the USB chip to a sane state in early startup before + * removing this hack + */ + if (enat_num == 1) + *enat_cpld |= 1 << enat_num; + + return 0; +} + +static void atari_ethernat_enable(struct irq_data *data) +{ + int enat_num = 140 - data->irq + 1; + /* + * map CPLD interrupt register + */ + if (!enat_cpld) + enat_cpld = (unsigned char *)ioremap((ATARI_ETHERNAT_PHYS_ADDR+0x23), 0x2); + *enat_cpld |= 1 << enat_num; +} + +static void atari_ethernat_disable(struct irq_data *data) +{ + int enat_num = 140 - data->irq + 1; + /* + * map CPLD interrupt register + */ + if (!enat_cpld) + enat_cpld = (unsigned char *)ioremap((ATARI_ETHERNAT_PHYS_ADDR+0x23), 0x2); + *enat_cpld &= ~(1 << enat_num); +} + +static void atari_ethernat_shutdown(struct irq_data *data) +{ + int enat_num = 140 - data->irq + 1; + if (enat_cpld) { + *enat_cpld &= ~(1 << enat_num); + iounmap(enat_cpld); + enat_cpld = NULL; + } +} + +static struct irq_chip atari_ethernat_chip = { + .name = "ethernat", + .irq_startup = atari_ethernat_startup, + .irq_shutdown = atari_ethernat_shutdown, + .irq_enable = atari_ethernat_enable, + .irq_disable = atari_ethernat_disable, }; /* @@ -360,8 +266,9 @@ static struct irq_controller atari_irq_controller = { void __init atari_init_IRQ(void) { - m68k_setup_user_interrupt(VEC_USER, NUM_ATARI_SOURCES - IRQ_USER, NULL); - m68k_setup_irq_controller(&atari_irq_controller, 1, NUM_ATARI_SOURCES - 1); + m68k_setup_user_interrupt(VEC_USER, NUM_ATARI_SOURCES - IRQ_USER); + m68k_setup_irq_controller(&atari_irq_chip, handle_simple_irq, 1, + NUM_ATARI_SOURCES - 1); /* Initialize the MFP(s) */ @@ -423,6 +330,30 @@ void __init atari_init_IRQ(void) /* Initialize the PSG: all sounds off, both ports output */ sound_ym.rd_data_reg_sel = 7; sound_ym.wd_data = 0xff; + + m68k_setup_irq_controller(&atari_mfptimer_chip, handle_simple_irq, + IRQ_MFP_TIMER1, 8); + + irq_set_status_flags(IRQ_MFP_TIMER1, IRQ_IS_POLLED); + irq_set_status_flags(IRQ_MFP_TIMER2, IRQ_IS_POLLED); + + /* prepare timer D data for use as poll interrupt */ + /* set Timer D data Register - needs to be > 0 */ + st_mfp.tim_dt_d = 254; /* < 100 Hz */ + /* start timer D, div = 1:100 */ + st_mfp.tim_ct_cd = (st_mfp.tim_ct_cd & 0xf0) | 0x6; + + /* request timer D dispatch handler */ + if (request_irq(IRQ_MFP_TIMD, mfptimer_handler, IRQF_SHARED, + stmfp_base.name, &stmfp_base)) + pr_err("Couldn't register %s interrupt\n", stmfp_base.name); + + /* + * EtherNAT ethernet / USB interrupt handlers + */ + + m68k_setup_irq_controller(&atari_ethernat_chip, handle_simple_irq, + 139, 2); } @@ -431,7 +362,7 @@ void __init atari_init_IRQ(void) * hardware with a programmable int vector (probably a VME board). */ -unsigned long atari_register_vme_int(void) +unsigned int atari_register_vme_int(void) { int i; @@ -448,7 +379,7 @@ unsigned long atari_register_vme_int(void) EXPORT_SYMBOL(atari_register_vme_int); -void atari_unregister_vme_int(unsigned long irq) +void atari_unregister_vme_int(unsigned int irq) { if (irq >= VME_SOURCE_BASE && irq < VME_SOURCE_BASE + VME_MAX_SOURCES) { irq -= VME_SOURCE_BASE; diff --git a/arch/m68k/atari/atasound.c b/arch/m68k/atari/atasound.c index d266fe89c12..1c1181ebb94 100644 --- a/arch/m68k/atari/atasound.c +++ b/arch/m68k/atari/atasound.c @@ -25,7 +25,6 @@ #include <linux/module.h> #include <asm/atarihw.h> -#include <asm/system.h> #include <asm/irq.h> #include <asm/pgtable.h> #include <asm/atariints.h> diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c index 4203d101363..01a62161b08 100644 --- a/arch/m68k/atari/config.c +++ b/arch/m68k/atari/config.c @@ -31,15 +31,18 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/ioport.h> +#include <linux/platform_device.h> +#include <linux/usb/isp116x.h> #include <linux/vt_kern.h> #include <linux/module.h> #include <asm/bootinfo.h> +#include <asm/bootinfo-atari.h> +#include <asm/byteorder.h> #include <asm/setup.h> #include <asm/atarihw.h> #include <asm/atariints.h> #include <asm/atari_stram.h> -#include <asm/system.h> #include <asm/machdep.h> #include <asm/hwtest.h> #include <asm/io.h> @@ -75,7 +78,7 @@ static void atari_heartbeat(int on); /* atari specific timer functions (in time.c) */ extern void atari_sched_init(irq_handler_t); -extern unsigned long atari_gettimeoffset (void); +extern u32 atari_gettimeoffset(void); extern int atari_mste_hwclk (int, struct rtc_time *); extern int atari_tt_hwclk (int, struct rtc_time *); extern int atari_mste_set_clock_mmss (unsigned long); @@ -128,14 +131,14 @@ static int __init scc_test(volatile char *ctla) int __init atari_parse_bootinfo(const struct bi_record *record) { int unknown = 0; - const u_long *data = record->data; + const void *data = record->data; - switch (record->tag) { + switch (be16_to_cpu(record->tag)) { case BI_ATARI_MCH_COOKIE: - atari_mch_cookie = *data; + atari_mch_cookie = be32_to_cpup(data); break; case BI_ATARI_MCH_TYPE: - atari_mch_type = *data; + atari_mch_type = be32_to_cpup(data); break; default: unknown = 1; @@ -205,7 +208,7 @@ void __init config_atari(void) mach_init_IRQ = atari_init_IRQ; mach_get_model = atari_get_model; mach_get_hardware_list = atari_get_hardware_list; - mach_gettimeoffset = atari_gettimeoffset; + arch_gettimeoffset = atari_gettimeoffset; mach_reset = atari_reset; mach_max_dma_address = 0xffffff; #if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE) @@ -414,9 +417,9 @@ void __init config_atari(void) * FDC val = 4 -> Supervisor only */ asm volatile ("\n" " .chip 68030\n" - " pmove %0@,%/tt1\n" + " pmove %0,%/tt1\n" " .chip 68k" - : : "a" (&tt1_val)); + : : "m" (tt1_val)); } else { asm volatile ("\n" " .chip 68040\n" @@ -569,10 +572,10 @@ static void atari_reset(void) : "d0"); } else asm volatile ("\n" - " pmove %0@,%%tc\n" + " pmove %0,%%tc\n" " jmp %1@" : /* no outputs */ - : "a" (&tc_val), "a" (reset_addr)); + : "m" (tc_val), "a" (reset_addr)); } @@ -656,3 +659,240 @@ static void atari_get_hardware_list(struct seq_file *m) ATARIHW_ANNOUNCE(VME, "VME Bus"); ATARIHW_ANNOUNCE(DSP56K, "DSP56001 processor"); } + +/* + * MSch: initial platform device support for Atari, + * required for EtherNAT/EtherNEC/NetUSBee drivers + */ + +#if defined(CONFIG_ATARI_ETHERNAT) || defined(CONFIG_ATARI_ETHERNEC) +static void isp1160_delay(struct device *dev, int delay) +{ + ndelay(delay); +} +#endif + +#ifdef CONFIG_ATARI_ETHERNAT +/* + * EtherNAT: SMC91C111 Ethernet chipset, handled by smc91x driver + */ + +#define ATARI_ETHERNAT_IRQ 140 + +static struct resource smc91x_resources[] = { + [0] = { + .name = "smc91x-regs", + .start = ATARI_ETHERNAT_PHYS_ADDR, + .end = ATARI_ETHERNAT_PHYS_ADDR + 0xfffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "smc91x-irq", + .start = ATARI_ETHERNAT_IRQ, + .end = ATARI_ETHERNAT_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = -1, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +/* + * ISP 1160 - using the isp116x-hcd module + */ + +#define ATARI_USB_PHYS_ADDR 0x80000012 +#define ATARI_USB_IRQ 139 + +static struct resource isp1160_resources[] = { + [0] = { + .name = "isp1160-data", + .start = ATARI_USB_PHYS_ADDR, + .end = ATARI_USB_PHYS_ADDR + 0x1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "isp1160-regs", + .start = ATARI_USB_PHYS_ADDR + 0x4, + .end = ATARI_USB_PHYS_ADDR + 0x5, + .flags = IORESOURCE_MEM, + }, + [2] = { + .name = "isp1160-irq", + .start = ATARI_USB_IRQ, + .end = ATARI_USB_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +/* (DataBusWidth16|AnalogOCEnable|DREQOutputPolarity|DownstreamPort15KRSel ) */ +static struct isp116x_platform_data isp1160_platform_data = { + /* Enable internal resistors on downstream ports */ + .sel15Kres = 1, + /* On-chip overcurrent protection */ + .oc_enable = 1, + /* INT output polarity */ + .int_act_high = 1, + /* INT edge or level triggered */ + .int_edge_triggered = 0, + + /* WAKEUP pin connected - NOT SUPPORTED */ + /* .remote_wakeup_connected = 0, */ + /* Wakeup by devices on usb bus enabled */ + .remote_wakeup_enable = 0, + .delay = isp1160_delay, +}; + +static struct platform_device isp1160_device = { + .name = "isp116x-hcd", + .id = 0, + .num_resources = ARRAY_SIZE(isp1160_resources), + .resource = isp1160_resources, + .dev = { + .platform_data = &isp1160_platform_data, + }, +}; + +static struct platform_device *atari_ethernat_devices[] __initdata = { + &smc91x_device, + &isp1160_device +}; +#endif /* CONFIG_ATARI_ETHERNAT */ + +#ifdef CONFIG_ATARI_ETHERNEC +/* + * EtherNEC: RTL8019 (NE2000 compatible) Ethernet chipset, + * handled by ne.c driver + */ + +#define ATARI_ETHERNEC_PHYS_ADDR 0xfffa0000 +#define ATARI_ETHERNEC_BASE 0x300 +#define ATARI_ETHERNEC_IRQ IRQ_MFP_TIMER1 + +static struct resource rtl8019_resources[] = { + [0] = { + .name = "rtl8019-regs", + .start = ATARI_ETHERNEC_BASE, + .end = ATARI_ETHERNEC_BASE + 0x20 - 1, + .flags = IORESOURCE_IO, + }, + [1] = { + .name = "rtl8019-irq", + .start = ATARI_ETHERNEC_IRQ, + .end = ATARI_ETHERNEC_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device rtl8019_device = { + .name = "ne", + .id = -1, + .num_resources = ARRAY_SIZE(rtl8019_resources), + .resource = rtl8019_resources, +}; + +/* + * NetUSBee: ISP1160 USB host adapter via ROM-port adapter + */ + +#define ATARI_NETUSBEE_PHYS_ADDR 0xfffa8000 +#define ATARI_NETUSBEE_BASE 0x340 +#define ATARI_NETUSBEE_IRQ IRQ_MFP_TIMER2 + +static struct resource netusbee_resources[] = { + [0] = { + .name = "isp1160-data", + .start = ATARI_NETUSBEE_BASE, + .end = ATARI_NETUSBEE_BASE + 0x1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "isp1160-regs", + .start = ATARI_NETUSBEE_BASE + 0x20, + .end = ATARI_NETUSBEE_BASE + 0x21, + .flags = IORESOURCE_MEM, + }, + [2] = { + .name = "isp1160-irq", + .start = ATARI_NETUSBEE_IRQ, + .end = ATARI_NETUSBEE_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +/* (DataBusWidth16|AnalogOCEnable|DREQOutputPolarity|DownstreamPort15KRSel ) */ +static struct isp116x_platform_data netusbee_platform_data = { + /* Enable internal resistors on downstream ports */ + .sel15Kres = 1, + /* On-chip overcurrent protection */ + .oc_enable = 1, + /* INT output polarity */ + .int_act_high = 1, + /* INT edge or level triggered */ + .int_edge_triggered = 0, + + /* WAKEUP pin connected - NOT SUPPORTED */ + /* .remote_wakeup_connected = 0, */ + /* Wakeup by devices on usb bus enabled */ + .remote_wakeup_enable = 0, + .delay = isp1160_delay, +}; + +static struct platform_device netusbee_device = { + .name = "isp116x-hcd", + .id = 1, + .num_resources = ARRAY_SIZE(netusbee_resources), + .resource = netusbee_resources, + .dev = { + .platform_data = &netusbee_platform_data, + }, +}; + +static struct platform_device *atari_netusbee_devices[] __initdata = { + &rtl8019_device, + &netusbee_device +}; +#endif /* CONFIG_ATARI_ETHERNEC */ + +int __init atari_platform_init(void) +{ + int rv = 0; + + if (!MACH_IS_ATARI) + return -ENODEV; + +#ifdef CONFIG_ATARI_ETHERNAT + { + unsigned char *enatc_virt; + enatc_virt = (unsigned char *)ioremap((ATARI_ETHERNAT_PHYS_ADDR+0x23), 0xf); + if (hwreg_present(enatc_virt)) { + rv = platform_add_devices(atari_ethernat_devices, + ARRAY_SIZE(atari_ethernat_devices)); + } + iounmap(enatc_virt); + } +#endif + +#ifdef CONFIG_ATARI_ETHERNEC + { + int error; + unsigned char *enec_virt; + enec_virt = (unsigned char *)ioremap((ATARI_ETHERNEC_PHYS_ADDR), 0xf); + if (hwreg_present(enec_virt)) { + error = platform_add_devices(atari_netusbee_devices, + ARRAY_SIZE(atari_netusbee_devices)); + if (error && !rv) + rv = error; + } + iounmap(enec_virt); + } +#endif + + return rv; +} + +arch_initcall(atari_platform_init); diff --git a/arch/m68k/atari/debug.c b/arch/m68k/atari/debug.c index 5a484247e49..03cb5e08d7c 100644 --- a/arch/m68k/atari/debug.c +++ b/arch/m68k/atari/debug.c @@ -202,7 +202,6 @@ static void __init atari_init_mfp_port(int cflag) static void __init atari_init_scc_port(int cflag) { - extern int atari_SCC_reset_done; static int clksrc_table[9] = /* reg 11: 0x50 = BRG, 0x00 = RTxC, 0x28 = TRxC */ { 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x00, 0x00 }; @@ -288,6 +287,8 @@ static void __init atari_init_midi_port(int cflag) static int __init atari_debug_setup(char *arg) { + bool registered; + if (!MACH_IS_ATARI) return 0; @@ -295,6 +296,7 @@ static int __init atari_debug_setup(char *arg) /* defaults to ser2 for a Falcon and ser1 otherwise */ arg = MACH_IS_FALCON ? "ser2" : "ser1"; + registered = !!atari_console_driver.write; if (!strcmp(arg, "ser1")) { /* ST-MFP Modem1 serial port */ atari_init_mfp_port(B9600|CS8); @@ -318,7 +320,7 @@ static int __init atari_debug_setup(char *arg) sound_ym.wd_data = sound_ym.rd_data_reg_sel | 0x20; /* strobe H */ atari_console_driver.write = atari_par_console_write; } - if (atari_console_driver.write) + if (atari_console_driver.write && !registered) register_console(&atari_console_driver); return 0; diff --git a/arch/m68k/atari/stram.c b/arch/m68k/atari/stram.c index 0810c8d56e5..5f8cb5a234d 100644 --- a/arch/m68k/atari/stram.c +++ b/arch/m68k/atari/stram.c @@ -47,6 +47,7 @@ static struct resource stram_pool = { static unsigned long pool_size = 1024*1024; +static unsigned long stram_virt_offset; static int __init atari_stram_setup(char *arg) { @@ -67,14 +68,12 @@ early_param("stram_pool", atari_stram_setup); void __init atari_stram_init(void) { int i; - void *stram_start; /* * determine whether kernel code resides in ST-RAM * (then ST-RAM is the first memory block at virtual 0x0) */ - stram_start = phys_to_virt(0); - kernel_in_stram = (stram_start == 0); + kernel_in_stram = (m68k_memory[0].addr == 0); for (i = 0; i < m68k_num_memory; ++i) { if (m68k_memory[i].addr == 0) { @@ -89,24 +88,62 @@ void __init atari_stram_init(void) /* * This function is called from setup_arch() to reserve the pages needed for - * ST-RAM management. + * ST-RAM management, if the kernel resides in ST-RAM. */ void __init atari_stram_reserve_pages(void *start_mem) { - /* - * always reserve first page of ST-RAM, the first 2 KiB are - * supervisor-only! - */ - if (!kernel_in_stram) - reserve_bootmem(0, PAGE_SIZE, BOOTMEM_DEFAULT); + if (kernel_in_stram) { + pr_debug("atari_stram pool: kernel in ST-RAM, using alloc_bootmem!\n"); + stram_pool.start = (resource_size_t)alloc_bootmem_low_pages(pool_size); + stram_pool.end = stram_pool.start + pool_size - 1; + request_resource(&iomem_resource, &stram_pool); + stram_virt_offset = 0; + pr_debug("atari_stram pool: size = %lu bytes, resource = %pR\n", + pool_size, &stram_pool); + pr_debug("atari_stram pool: stram_virt_offset = %lx\n", + stram_virt_offset); + } +} - stram_pool.start = (resource_size_t)alloc_bootmem_low_pages(pool_size); - stram_pool.end = stram_pool.start + pool_size - 1; - request_resource(&iomem_resource, &stram_pool); - pr_debug("atari_stram pool: size = %lu bytes, resource = %pR\n", - pool_size, &stram_pool); +/* + * This function is called as arch initcall to reserve the pages needed for + * ST-RAM management, if the kernel does not reside in ST-RAM. + */ +int __init atari_stram_map_pages(void) +{ + if (!kernel_in_stram) { + /* + * Skip page 0, as the fhe first 2 KiB are supervisor-only! + */ + pr_debug("atari_stram pool: kernel not in ST-RAM, using ioremap!\n"); + stram_pool.start = PAGE_SIZE; + stram_pool.end = stram_pool.start + pool_size - 1; + request_resource(&iomem_resource, &stram_pool); + stram_virt_offset = (unsigned long) ioremap(stram_pool.start, + resource_size(&stram_pool)) - stram_pool.start; + pr_debug("atari_stram pool: size = %lu bytes, resource = %pR\n", + pool_size, &stram_pool); + pr_debug("atari_stram pool: stram_virt_offset = %lx\n", + stram_virt_offset); + } + return 0; +} +arch_initcall(atari_stram_map_pages); + + +void *atari_stram_to_virt(unsigned long phys) +{ + return (void *)(phys + stram_virt_offset); +} +EXPORT_SYMBOL(atari_stram_to_virt); + + +unsigned long atari_stram_to_phys(void *virt) +{ + return (unsigned long)(virt - stram_virt_offset); } +EXPORT_SYMBOL(atari_stram_to_phys); void *atari_stram_alloc(unsigned long size, const char *owner) @@ -134,14 +171,14 @@ void *atari_stram_alloc(unsigned long size, const char *owner) } pr_debug("atari_stram_alloc: returning %pR\n", res); - return (void *)res->start; + return atari_stram_to_virt(res->start); } EXPORT_SYMBOL(atari_stram_alloc); void atari_stram_free(void *addr) { - unsigned long start = (unsigned long)addr; + unsigned long start = atari_stram_to_phys(addr); struct resource *res; unsigned long size; diff --git a/arch/m68k/atari/time.c b/arch/m68k/atari/time.c index a0531f34c61..da8f981c36d 100644 --- a/arch/m68k/atari/time.c +++ b/arch/m68k/atari/time.c @@ -17,6 +17,7 @@ #include <linux/rtc.h> #include <linux/bcd.h> #include <linux/delay.h> +#include <linux/export.h> #include <asm/atariints.h> @@ -41,9 +42,9 @@ atari_sched_init(irq_handler_t timer_routine) #define TICK_SIZE 10000 /* This is always executed with interrupts disabled. */ -unsigned long atari_gettimeoffset (void) +u32 atari_gettimeoffset(void) { - unsigned long ticks, offset = 0; + u32 ticks, offset = 0; /* read MFP timer C current value */ ticks = st_mfp.tim_dt_c; @@ -56,7 +57,7 @@ unsigned long atari_gettimeoffset (void) ticks = INT_TICKS - ticks; ticks = ticks * 10000L / INT_TICKS; - return ticks + offset; + return (ticks + offset) * 1000; } |