diff options
Diffstat (limited to 'arch/ia64/mm/contig.c')
| -rw-r--r-- | arch/ia64/mm/contig.c | 191 |
1 files changed, 90 insertions, 101 deletions
diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c index 344f64eca7a..52715a71aed 100644 --- a/arch/ia64/mm/contig.c +++ b/arch/ia64/mm/contig.c @@ -16,6 +16,7 @@ */ #include <linux/bootmem.h> #include <linux/efi.h> +#include <linux/memblock.h> #include <linux/mm.h> #include <linux/nmi.h> #include <linux/swap.h> @@ -30,72 +31,6 @@ static unsigned long max_gap; #endif -/** - * show_mem - give short summary of memory stats - * - * Shows a simple page count of reserved and used pages in the system. - * For discontig machines, it does this on a per-pgdat basis. - */ -void show_mem(void) -{ - int i, total_reserved = 0; - int total_shared = 0, total_cached = 0; - unsigned long total_present = 0; - pg_data_t *pgdat; - - printk(KERN_INFO "Mem-info:\n"); - show_free_areas(); - printk(KERN_INFO "Free swap: %6ldkB\n", - nr_swap_pages<<(PAGE_SHIFT-10)); - printk(KERN_INFO "Node memory in pages:\n"); - for_each_online_pgdat(pgdat) { - unsigned long present; - unsigned long flags; - int shared = 0, cached = 0, reserved = 0; - - pgdat_resize_lock(pgdat, &flags); - present = pgdat->node_present_pages; - for(i = 0; i < pgdat->node_spanned_pages; i++) { - struct page *page; - if (unlikely(i % MAX_ORDER_NR_PAGES == 0)) - touch_nmi_watchdog(); - if (pfn_valid(pgdat->node_start_pfn + i)) - page = pfn_to_page(pgdat->node_start_pfn + i); - else { -#ifdef CONFIG_VIRTUAL_MEM_MAP - if (max_gap < LARGE_GAP) - continue; -#endif - i = vmemmap_find_next_valid_pfn(pgdat->node_id, - i) - 1; - continue; - } - if (PageReserved(page)) - reserved++; - else if (PageSwapCache(page)) - cached++; - else if (page_count(page)) - shared += page_count(page)-1; - } - pgdat_resize_unlock(pgdat, &flags); - total_present += present; - total_reserved += reserved; - total_cached += cached; - total_shared += shared; - printk(KERN_INFO "Node %4d: RAM: %11ld, rsvd: %8d, " - "shrd: %10d, swpd: %10d\n", pgdat->node_id, - present, reserved, shared, cached); - } - printk(KERN_INFO "%ld pages of RAM\n", total_present); - printk(KERN_INFO "%d reserved pages\n", total_reserved); - printk(KERN_INFO "%d pages shared\n", total_shared); - printk(KERN_INFO "%d pages swap cached\n", total_cached); - printk(KERN_INFO "Total of %ld pages in page table cache\n", - quicklist_total_size()); - printk(KERN_INFO "%d free buffer pages\n", nr_free_buffer_pages()); -} - - /* physical address where the bootmem map is located */ unsigned long bootmap_start; @@ -109,10 +44,10 @@ unsigned long bootmap_start; * bootmap_start. This address must be page-aligned. */ static int __init -find_bootmap_location (unsigned long start, unsigned long end, void *arg) +find_bootmap_location (u64 start, u64 end, void *arg) { - unsigned long needed = *(unsigned long *)arg; - unsigned long range_start, range_end, free_start; + u64 needed = *(unsigned long *)arg; + u64 range_start, range_end, free_start; int i; #if IGNORE_PFN0 @@ -153,35 +88,101 @@ static void *cpu_data; * * Allocate and setup per-cpu data areas. */ -void * __cpuinit -per_cpu_init (void) +void *per_cpu_init(void) { - int cpu; - static int first_time=1; + static bool first_time = true; + void *cpu0_data = __cpu0_per_cpu; + unsigned int cpu; + + if (!first_time) + goto skip; + first_time = false; /* - * get_free_pages() cannot be used before cpu_init() done. BSP - * allocates "NR_CPUS" pages for all CPUs to avoid that AP calls - * get_zeroed_page(). + * get_free_pages() cannot be used before cpu_init() done. + * BSP allocates PERCPU_PAGE_SIZE bytes for all possible CPUs + * to avoid that AP calls get_zeroed_page(). */ - if (first_time) { - first_time=0; - for (cpu = 0; cpu < NR_CPUS; cpu++) { - memcpy(cpu_data, __phys_per_cpu_start, __per_cpu_end - __per_cpu_start); - __per_cpu_offset[cpu] = (char *) cpu_data - __per_cpu_start; - cpu_data += PERCPU_PAGE_SIZE; - per_cpu(local_per_cpu_offset, cpu) = __per_cpu_offset[cpu]; - } + for_each_possible_cpu(cpu) { + void *src = cpu == 0 ? cpu0_data : __phys_per_cpu_start; + + memcpy(cpu_data, src, __per_cpu_end - __per_cpu_start); + __per_cpu_offset[cpu] = (char *)cpu_data - __per_cpu_start; + per_cpu(local_per_cpu_offset, cpu) = __per_cpu_offset[cpu]; + + /* + * percpu area for cpu0 is moved from the __init area + * which is setup by head.S and used till this point. + * Update ar.k3. This move is ensures that percpu + * area for cpu0 is on the correct node and its + * virtual address isn't insanely far from other + * percpu areas which is important for congruent + * percpu allocator. + */ + if (cpu == 0) + ia64_set_kr(IA64_KR_PER_CPU_DATA, __pa(cpu_data) - + (unsigned long)__per_cpu_start); + + cpu_data += PERCPU_PAGE_SIZE; } +skip: return __per_cpu_start + __per_cpu_offset[smp_processor_id()]; } static inline void alloc_per_cpu_data(void) { - cpu_data = __alloc_bootmem(PERCPU_PAGE_SIZE * NR_CPUS, + cpu_data = __alloc_bootmem(PERCPU_PAGE_SIZE * num_possible_cpus(), PERCPU_PAGE_SIZE, __pa(MAX_DMA_ADDRESS)); } + +/** + * setup_per_cpu_areas - setup percpu areas + * + * Arch code has already allocated and initialized percpu areas. All + * this function has to do is to teach the determined layout to the + * dynamic percpu allocator, which happens to be more complex than + * creating whole new ones using helpers. + */ +void __init +setup_per_cpu_areas(void) +{ + struct pcpu_alloc_info *ai; + struct pcpu_group_info *gi; + unsigned int cpu; + ssize_t static_size, reserved_size, dyn_size; + int rc; + + ai = pcpu_alloc_alloc_info(1, num_possible_cpus()); + if (!ai) + panic("failed to allocate pcpu_alloc_info"); + gi = &ai->groups[0]; + + /* units are assigned consecutively to possible cpus */ + for_each_possible_cpu(cpu) + gi->cpu_map[gi->nr_units++] = cpu; + + /* set parameters */ + static_size = __per_cpu_end - __per_cpu_start; + reserved_size = PERCPU_MODULE_RESERVE; + dyn_size = PERCPU_PAGE_SIZE - static_size - reserved_size; + if (dyn_size < 0) + panic("percpu area overflow static=%zd reserved=%zd\n", + static_size, reserved_size); + + ai->static_size = static_size; + ai->reserved_size = reserved_size; + ai->dyn_size = dyn_size; + ai->unit_size = PERCPU_PAGE_SIZE; + ai->atom_size = PAGE_SIZE; + ai->alloc_size = PERCPU_PAGE_SIZE; + + rc = pcpu_setup_first_chunk(ai, __per_cpu_start + __per_cpu_offset[0]); + if (rc) + panic("failed to setup percpu area (err=%d)", rc); + + pcpu_free_alloc_info(ai); +} #else #define alloc_per_cpu_data() do { } while (0) #endif /* CONFIG_SMP */ @@ -225,15 +226,6 @@ find_memory (void) alloc_per_cpu_data(); } -static int -count_pages (u64 start, u64 end, void *arg) -{ - unsigned long *count = arg; - - *count += (end - start) >> PAGE_SHIFT; - return 0; -} - /* * Set up the page tables. */ @@ -244,9 +236,6 @@ paging_init (void) unsigned long max_dma; unsigned long max_zone_pfns[MAX_NR_ZONES]; - num_physpages = 0; - efi_memmap_walk(count_pages, &num_physpages); - memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); #ifdef CONFIG_ZONE_DMA max_dma = virt_to_phys((void *) MAX_DMA_ADDRESS) >> PAGE_SHIFT; @@ -255,7 +244,7 @@ paging_init (void) max_zone_pfns[ZONE_NORMAL] = max_low_pfn; #ifdef CONFIG_VIRTUAL_MEM_MAP - efi_memmap_walk(register_active_ranges, NULL); + efi_memmap_walk(filter_memory, register_active_ranges); efi_memmap_walk(find_largest_hole, (u64 *)&max_gap); if (max_gap < LARGE_GAP) { vmem_map = (struct page *) 0; @@ -267,8 +256,8 @@ paging_init (void) map_size = PAGE_ALIGN(ALIGN(max_low_pfn, MAX_ORDER_NR_PAGES) * sizeof(struct page)); - vmalloc_end -= map_size; - vmem_map = (struct page *) vmalloc_end; + VMALLOC_END -= map_size; + vmem_map = (struct page *) VMALLOC_END; efi_memmap_walk(create_mem_map_page_table, NULL); /* @@ -282,7 +271,7 @@ paging_init (void) printk("Virtual mem_map starts at 0x%p\n", mem_map); } #else /* !CONFIG_VIRTUAL_MEM_MAP */ - add_active_range(0, 0, max_low_pfn); + memblock_add_node(0, PFN_PHYS(max_low_pfn), 0); free_area_init_nodes(max_zone_pfns); #endif /* !CONFIG_VIRTUAL_MEM_MAP */ zero_page_memmap_ptr = virt_to_page(ia64_imva(empty_zero_page)); |
