3 files changed, 0 insertions, 234 deletions
diff --git a/arch/i386/mach-default/Makefile b/arch/i386/mach-default/Makefile
deleted file mode 100644
index e95bb023792..00000000000
--- a/arch/i386/mach-default/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-obj-y				:= setup.o topology.o
diff --git a/arch/i386/mach-default/setup.c b/arch/i386/mach-default/setup.c
deleted file mode 100644
index b4a7455c699..00000000000
--- a/arch/i386/mach-default/setup.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- *	Machine specific setup for generic
- */
-
-#include <linux/config.h>
-#include <linux/smp.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <asm/acpi.h>
-#include <asm/arch_hooks.h>
-
-#ifdef CONFIG_HOTPLUG_CPU
-#define DEFAULT_SEND_IPI	(1)
-#else
-#define DEFAULT_SEND_IPI	(0)
-#endif
-
-int no_broadcast=DEFAULT_SEND_IPI;
-
-/**
- * pre_intr_init_hook - initialisation prior to setting up interrupt vectors
- *
- * Description:
- *	Perform any necessary interrupt initialisation prior to setting up
- *	the "ordinary" interrupt call gates.  For legacy reasons, the ISA
- *	interrupts should be initialised here if the machine emulates a PC
- *	in any way.
- **/
-void __init pre_intr_init_hook(void)
-{
-	init_ISA_irqs();
-}
-
-/*
- * IRQ2 is cascade interrupt to second interrupt controller
- */
-static struct irqaction irq2 = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL};
-
-/**
- * intr_init_hook - post gate setup interrupt initialisation
- *
- * Description:
- *	Fill in any interrupts that may have been left out by the general
- *	init_IRQ() routine.  interrupts having to do with the machine rather
- *	than the devices on the I/O bus (like APIC interrupts in intel MP
- *	systems) are started here.
- **/
-void __init intr_init_hook(void)
-{
-#ifdef CONFIG_X86_LOCAL_APIC
-	apic_intr_init();
-#endif
-
-	if (!acpi_ioapic)
-		setup_irq(2, &irq2);
-}
-
-/**
- * pre_setup_arch_hook - hook called prior to any setup_arch() execution
- *
- * Description:
- *	generally used to activate any machine specific identification
- *	routines that may be needed before setup_arch() runs.  On VISWS
- *	this is used to get the board revision and type.
- **/
-void __init pre_setup_arch_hook(void)
-{
-}
-
-/**
- * trap_init_hook - initialise system specific traps
- *
- * Description:
- *	Called as the final act of trap_init().  Used in VISWS to initialise
- *	the various board specific APIC traps.
- **/
-void __init trap_init_hook(void)
-{
-}
-
-static struct irqaction irq0  = { timer_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "timer", NULL, NULL};
-
-/**
- * time_init_hook - do any specific initialisations for the system timer.
- *
- * Description:
- *	Must plug the system timer interrupt source at HZ into the IRQ listed
- *	in irq_vectors.h:TIMER_IRQ
- **/
-void __init time_init_hook(void)
-{
-	setup_irq(0, &irq0);
-}
-
-#ifdef CONFIG_MCA
-/**
- * mca_nmi_hook - hook into MCA specific NMI chain
- *
- * Description:
- *	The MCA (Microchannel Arcitecture) has an NMI chain for NMI sources
- *	along the MCA bus.  Use this to hook into that chain if you will need
- *	it.
- **/
-void __init mca_nmi_hook(void)
-{
-	/* If I recall correctly, there's a whole bunch of other things that
-	 * we can do to check for NMI problems, but that's all I know about
-	 * at the moment.
-	 */
-
-	printk("NMI generated from unknown source!\n");
-}
-#endif
-
-static __init int no_ipi_broadcast(char *str)
-{
-	get_option(&str, &no_broadcast);
-	printk ("Using %s mode\n", no_broadcast ? "No IPI Broadcast" :
-											"IPI Broadcast");
-	return 1;
-}
-
-__setup("no_ipi_broadcast", no_ipi_broadcast);
-
-static int __init print_ipi_mode(void)
-{
-	printk ("Using IPI %s mode\n", no_broadcast ? "No-Shortcut" :
-											"Shortcut");
-	return 0;
-}
-
-late_initcall(print_ipi_mode);
diff --git a/arch/i386/mach-default/topology.c b/arch/i386/mach-default/topology.c
deleted file mode 100644
index b64314069e7..00000000000
--- a/arch/i386/mach-default/topology.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * arch/i386/mach-generic/topology.c - Populate driverfs with topology information
- *
- * Written by: Matthew Dobson, IBM Corporation
- * Original Code: Paul Dorwin, IBM Corporation, Patrick Mochel, OSDL
- *
- * Copyright (C) 2002, IBM Corp.
- *
- * All rights reserved.          
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <colpatch@us.ibm.com>
- */
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/nodemask.h>
-#include <asm/cpu.h>
-
-static struct i386_cpu cpu_devices[NR_CPUS];
-
-int arch_register_cpu(int num){
-	struct node *parent = NULL;
-	
-#ifdef CONFIG_NUMA
-	int node = cpu_to_node(num);
-	if (node_online(node))
-		parent = &node_devices[node].node;
-#endif /* CONFIG_NUMA */
-
-	return register_cpu(&cpu_devices[num].cpu, num, parent);
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-
-void arch_unregister_cpu(int num) {
-	struct node *parent = NULL;
-
-#ifdef CONFIG_NUMA
-	int node = cpu_to_node(num);
-	if (node_online(node))
-		parent = &node_devices[node].node;
-#endif /* CONFIG_NUMA */
-
-	return unregister_cpu(&cpu_devices[num].cpu, parent);
-}
-EXPORT_SYMBOL(arch_register_cpu);
-EXPORT_SYMBOL(arch_unregister_cpu);
-#endif /*CONFIG_HOTPLUG_CPU*/
-
-
-
-#ifdef CONFIG_NUMA
-#include <linux/mmzone.h>
-#include <asm/node.h>
-
-struct i386_node node_devices[MAX_NUMNODES];
-
-static int __init topology_init(void)
-{
-	int i;
-
-	for_each_online_node(i)
-		arch_register_node(i);
-
-	for_each_present_cpu(i)
-		arch_register_cpu(i);
-	return 0;
-}
-
-#else /* !CONFIG_NUMA */
-
-static int __init topology_init(void)
-{
-	int i;
-
-	for_each_present_cpu(i)
-		arch_register_cpu(i);
-	return 0;
-}
-
-#endif /* CONFIG_NUMA */
-
-subsys_initcall(topology_init);