diff options
Diffstat (limited to 'arch/i386/kernel/scx200.c')
| -rw-r--r-- | arch/i386/kernel/scx200.c | 168 |
1 files changed, 0 insertions, 168 deletions
diff --git a/arch/i386/kernel/scx200.c b/arch/i386/kernel/scx200.c deleted file mode 100644 index 321f5fd26e7..00000000000 --- a/arch/i386/kernel/scx200.c +++ /dev/null @@ -1,168 +0,0 @@ -/* linux/arch/i386/kernel/scx200.c - - Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com> - - National Semiconductor SCx200 support. */ - -#include <linux/config.h> -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/pci.h> - -#include <linux/scx200.h> -#include <linux/scx200_gpio.h> - -/* Verify that the configuration block really is there */ -#define scx200_cb_probe(base) (inw((base) + SCx200_CBA) == (base)) - -#define NAME "scx200" - -MODULE_AUTHOR("Christer Weinigel <wingel@nano-system.com>"); -MODULE_DESCRIPTION("NatSemi SCx200 Driver"); -MODULE_LICENSE("GPL"); - -unsigned scx200_gpio_base = 0; -long scx200_gpio_shadow[2]; - -unsigned scx200_cb_base = 0; - -static struct pci_device_id scx200_tbl[] = { - { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_BRIDGE) }, - { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE) }, - { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_XBUS) }, - { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_XBUS) }, - { }, -}; -MODULE_DEVICE_TABLE(pci,scx200_tbl); - -static int __devinit scx200_probe(struct pci_dev *, const struct pci_device_id *); - -static struct pci_driver scx200_pci_driver = { - .name = "scx200", - .id_table = scx200_tbl, - .probe = scx200_probe, -}; - -static DEFINE_SPINLOCK(scx200_gpio_config_lock); - -static int __devinit scx200_probe(struct pci_dev *pdev, const struct pci_device_id *ent) -{ - int bank; - unsigned base; - - if (pdev->device == PCI_DEVICE_ID_NS_SCx200_BRIDGE || - pdev->device == PCI_DEVICE_ID_NS_SC1100_BRIDGE) { - base = pci_resource_start(pdev, 0); - printk(KERN_INFO NAME ": GPIO base 0x%x\n", base); - - if (request_region(base, SCx200_GPIO_SIZE, "NatSemi SCx200 GPIO") == 0) { - printk(KERN_ERR NAME ": can't allocate I/O for GPIOs\n"); - return -EBUSY; - } - - scx200_gpio_base = base; - - /* read the current values driven on the GPIO signals */ - for (bank = 0; bank < 2; ++bank) - scx200_gpio_shadow[bank] = inl(scx200_gpio_base + 0x10 * bank); - - } else { - /* find the base of the Configuration Block */ - if (scx200_cb_probe(SCx200_CB_BASE_FIXED)) { - scx200_cb_base = SCx200_CB_BASE_FIXED; - } else { - pci_read_config_dword(pdev, SCx200_CBA_SCRATCH, &base); - if (scx200_cb_probe(base)) { - scx200_cb_base = base; - } else { - printk(KERN_WARNING NAME ": Configuration Block not found\n"); - return -ENODEV; - } - } - printk(KERN_INFO NAME ": Configuration Block base 0x%x\n", scx200_cb_base); - } - - return 0; -} - -u32 scx200_gpio_configure(int index, u32 mask, u32 bits) -{ - u32 config, new_config; - unsigned long flags; - - spin_lock_irqsave(&scx200_gpio_config_lock, flags); - - outl(index, scx200_gpio_base + 0x20); - config = inl(scx200_gpio_base + 0x24); - - new_config = (config & mask) | bits; - outl(new_config, scx200_gpio_base + 0x24); - - spin_unlock_irqrestore(&scx200_gpio_config_lock, flags); - - return config; -} - -#if 0 -void scx200_gpio_dump(unsigned index) -{ - u32 config = scx200_gpio_configure(index, ~0, 0); - printk(KERN_DEBUG "GPIO%02u: 0x%08lx", index, (unsigned long)config); - - if (config & 1) - printk(" OE"); /* output enabled */ - else - printk(" TS"); /* tristate */ - if (config & 2) - printk(" PP"); /* push pull */ - else - printk(" OD"); /* open drain */ - if (config & 4) - printk(" PUE"); /* pull up enabled */ - else - printk(" PUD"); /* pull up disabled */ - if (config & 8) - printk(" LOCKED"); /* locked */ - if (config & 16) - printk(" LEVEL"); /* level input */ - else - printk(" EDGE"); /* edge input */ - if (config & 32) - printk(" HI"); /* trigger on rising edge */ - else - printk(" LO"); /* trigger on falling edge */ - if (config & 64) - printk(" DEBOUNCE"); /* debounce */ - printk("\n"); -} -#endif /* 0 */ - -static int __init scx200_init(void) -{ - printk(KERN_INFO NAME ": NatSemi SCx200 Driver\n"); - - return pci_register_driver(&scx200_pci_driver); -} - -static void __exit scx200_cleanup(void) -{ - pci_unregister_driver(&scx200_pci_driver); - release_region(scx200_gpio_base, SCx200_GPIO_SIZE); -} - -module_init(scx200_init); -module_exit(scx200_cleanup); - -EXPORT_SYMBOL(scx200_gpio_base); -EXPORT_SYMBOL(scx200_gpio_shadow); -EXPORT_SYMBOL(scx200_gpio_configure); -EXPORT_SYMBOL(scx200_cb_base); - -/* - Local variables: - compile-command: "make -k -C ../../.. SUBDIRS=arch/i386/kernel modules" - c-basic-offset: 8 - End: -*/ |