diff options
Diffstat (limited to 'arch/i386/boot/compressed')
| -rw-r--r-- | arch/i386/boot/compressed/Makefile | 25 | ||||
| -rw-r--r-- | arch/i386/boot/compressed/head.S | 129 | ||||
| -rw-r--r-- | arch/i386/boot/compressed/misc.c | 381 | ||||
| -rw-r--r-- | arch/i386/boot/compressed/vmlinux.scr | 9 |
4 files changed, 0 insertions, 544 deletions
diff --git a/arch/i386/boot/compressed/Makefile b/arch/i386/boot/compressed/Makefile deleted file mode 100644 index 258ea95224f..00000000000 --- a/arch/i386/boot/compressed/Makefile +++ /dev/null @@ -1,25 +0,0 @@ -# -# linux/arch/i386/boot/compressed/Makefile -# -# create a compressed vmlinux image from the original vmlinux -# - -targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o -EXTRA_AFLAGS := -traditional - -LDFLAGS_vmlinux := -Ttext $(IMAGE_OFFSET) -e startup_32 - -$(obj)/vmlinux: $(obj)/head.o $(obj)/misc.o $(obj)/piggy.o FORCE - $(call if_changed,ld) - @: - -$(obj)/vmlinux.bin: vmlinux FORCE - $(call if_changed,objcopy) - -$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE - $(call if_changed,gzip) - -LDFLAGS_piggy.o := -r --format binary --oformat elf32-i386 -T - -$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE - $(call if_changed,ld) diff --git a/arch/i386/boot/compressed/head.S b/arch/i386/boot/compressed/head.S deleted file mode 100644 index b5893e4ecd3..00000000000 --- a/arch/i386/boot/compressed/head.S +++ /dev/null @@ -1,129 +0,0 @@ -/* - * linux/boot/head.S - * - * Copyright (C) 1991, 1992, 1993 Linus Torvalds - */ - -/* - * head.S contains the 32-bit startup code. - * - * NOTE!!! Startup happens at absolute address 0x00001000, which is also where - * the page directory will exist. The startup code will be overwritten by - * the page directory. [According to comments etc elsewhere on a compressed - * kernel it will end up at 0x1000 + 1Mb I hope so as I assume this. - AC] - * - * Page 0 is deliberately kept safe, since System Management Mode code in - * laptops may need to access the BIOS data stored there. This is also - * useful for future device drivers that either access the BIOS via VM86 - * mode. - */ - -/* - * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996 - */ -.text - -#include <linux/linkage.h> -#include <asm/segment.h> -#include <asm/page.h> - - .globl startup_32 - -startup_32: - cld - cli - movl $(__BOOT_DS),%eax - movl %eax,%ds - movl %eax,%es - movl %eax,%fs - movl %eax,%gs - - lss stack_start,%esp - xorl %eax,%eax -1: incl %eax # check that A20 really IS enabled - movl %eax,0x000000 # loop forever if it isn't - cmpl %eax,0x100000 - je 1b - -/* - * Initialize eflags. Some BIOS's leave bits like NT set. This would - * confuse the debugger if this code is traced. - * XXX - best to initialize before switching to protected mode. - */ - pushl $0 - popfl -/* - * Clear BSS - */ - xorl %eax,%eax - movl $_edata,%edi - movl $_end,%ecx - subl %edi,%ecx - cld - rep - stosb -/* - * Do the decompression, and jump to the new kernel.. - */ - subl $16,%esp # place for structure on the stack - movl %esp,%eax - pushl %esi # real mode pointer as second arg - pushl %eax # address of structure as first arg - call decompress_kernel - orl %eax,%eax - jnz 3f - popl %esi # discard address - popl %esi # real mode pointer - xorl %ebx,%ebx - ljmp $(__BOOT_CS), $__PHYSICAL_START - -/* - * We come here, if we were loaded high. - * We need to move the move-in-place routine down to 0x1000 - * and then start it with the buffer addresses in registers, - * which we got from the stack. - */ -3: - movl $move_routine_start,%esi - movl $0x1000,%edi - movl $move_routine_end,%ecx - subl %esi,%ecx - addl $3,%ecx - shrl $2,%ecx - cld - rep - movsl - - popl %esi # discard the address - popl %ebx # real mode pointer - popl %esi # low_buffer_start - popl %ecx # lcount - popl %edx # high_buffer_start - popl %eax # hcount - movl $__PHYSICAL_START,%edi - cli # make sure we don't get interrupted - ljmp $(__BOOT_CS), $0x1000 # and jump to the move routine - -/* - * Routine (template) for moving the decompressed kernel in place, - * if we were high loaded. This _must_ PIC-code ! - */ -move_routine_start: - movl %ecx,%ebp - shrl $2,%ecx - rep - movsl - movl %ebp,%ecx - andl $3,%ecx - rep - movsb - movl %edx,%esi - movl %eax,%ecx # NOTE: rep movsb won't move if %ecx == 0 - addl $3,%ecx - shrl $2,%ecx - rep - movsl - movl %ebx,%esi # Restore setup pointer - xorl %ebx,%ebx - ljmp $(__BOOT_CS), $__PHYSICAL_START -move_routine_end: diff --git a/arch/i386/boot/compressed/misc.c b/arch/i386/boot/compressed/misc.c deleted file mode 100644 index f19f3a7492a..00000000000 --- a/arch/i386/boot/compressed/misc.c +++ /dev/null @@ -1,381 +0,0 @@ -/* - * misc.c - * - * This is a collection of several routines from gzip-1.0.3 - * adapted for Linux. - * - * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994 - * puts by Nick Holloway 1993, better puts by Martin Mares 1995 - * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996 - */ - -#include <linux/linkage.h> -#include <linux/vmalloc.h> -#include <linux/screen_info.h> -#include <asm/io.h> -#include <asm/page.h> - -/* - * gzip declarations - */ - -#define OF(args) args -#define STATIC static - -#undef memset -#undef memcpy - -/* - * Why do we do this? Don't ask me.. - * - * Incomprehensible are the ways of bootloaders. - */ -static void* memset(void *, int, size_t); -static void* memcpy(void *, __const void *, size_t); -#define memzero(s, n) memset ((s), 0, (n)) - -typedef unsigned char uch; -typedef unsigned short ush; -typedef unsigned long ulg; - -#define WSIZE 0x8000 /* Window size must be at least 32k, */ - /* and a power of two */ - -static uch *inbuf; /* input buffer */ -static uch window[WSIZE]; /* Sliding window buffer */ - -static unsigned insize = 0; /* valid bytes in inbuf */ -static unsigned inptr = 0; /* index of next byte to be processed in inbuf */ -static unsigned outcnt = 0; /* bytes in output buffer */ - -/* gzip flag byte */ -#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */ -#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */ -#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ -#define ORIG_NAME 0x08 /* bit 3 set: original file name present */ -#define COMMENT 0x10 /* bit 4 set: file comment present */ -#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ -#define RESERVED 0xC0 /* bit 6,7: reserved */ - -#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf()) - -/* Diagnostic functions */ -#ifdef DEBUG -# define Assert(cond,msg) {if(!(cond)) error(msg);} -# define Trace(x) fprintf x -# define Tracev(x) {if (verbose) fprintf x ;} -# define Tracevv(x) {if (verbose>1) fprintf x ;} -# define Tracec(c,x) {if (verbose && (c)) fprintf x ;} -# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;} -#else -# define Assert(cond,msg) -# define Trace(x) -# define Tracev(x) -# define Tracevv(x) -# define Tracec(c,x) -# define Tracecv(c,x) -#endif - -static int fill_inbuf(void); -static void flush_window(void); -static void error(char *m); -static void gzip_mark(void **); -static void gzip_release(void **); - -/* - * This is set up by the setup-routine at boot-time - */ -static unsigned char *real_mode; /* Pointer to real-mode data */ - -#define RM_EXT_MEM_K (*(unsigned short *)(real_mode + 0x2)) -#ifndef STANDARD_MEMORY_BIOS_CALL -#define RM_ALT_MEM_K (*(unsigned long *)(real_mode + 0x1e0)) -#endif -#define RM_SCREEN_INFO (*(struct screen_info *)(real_mode+0)) - -extern char input_data[]; -extern int input_len; - -static long bytes_out = 0; -static uch *output_data; -static unsigned long output_ptr = 0; - -static void *malloc(int size); -static void free(void *where); - -static void putstr(const char *); - -extern int end; -static long free_mem_ptr = (long)&end; -static long free_mem_end_ptr; - -#define INPLACE_MOVE_ROUTINE 0x1000 -#define LOW_BUFFER_START 0x2000 -#define LOW_BUFFER_MAX 0x90000 -#define HEAP_SIZE 0x3000 -static unsigned int low_buffer_end, low_buffer_size; -static int high_loaded =0; -static uch *high_buffer_start /* = (uch *)(((ulg)&end) + HEAP_SIZE)*/; - -static char *vidmem = (char *)0xb8000; -static int vidport; -static int lines, cols; - -#ifdef CONFIG_X86_NUMAQ -static void * xquad_portio = NULL; -#endif - -#include "../../../../lib/inflate.c" - -static void *malloc(int size) -{ - void *p; - - if (size <0) error("Malloc error"); - if (free_mem_ptr <= 0) error("Memory error"); - - free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */ - - p = (void *)free_mem_ptr; - free_mem_ptr += size; - - if (free_mem_ptr >= free_mem_end_ptr) - error("Out of memory"); - - return p; -} - -static void free(void *where) -{ /* Don't care */ -} - -static void gzip_mark(void **ptr) -{ - *ptr = (void *) free_mem_ptr; -} - -static void gzip_release(void **ptr) -{ - free_mem_ptr = (long) *ptr; -} - -static void scroll(void) -{ - int i; - - memcpy ( vidmem, vidmem + cols * 2, ( lines - 1 ) * cols * 2 ); - for ( i = ( lines - 1 ) * cols * 2; i < lines * cols * 2; i += 2 ) - vidmem[i] = ' '; -} - -static void putstr(const char *s) -{ - int x,y,pos; - char c; - - x = RM_SCREEN_INFO.orig_x; - y = RM_SCREEN_INFO.orig_y; - - while ( ( c = *s++ ) != '\0' ) { - if ( c == '\n' ) { - x = 0; - if ( ++y >= lines ) { - scroll(); - y--; - } - } else { - vidmem [ ( x + cols * y ) * 2 ] = c; - if ( ++x >= cols ) { - x = 0; - if ( ++y >= lines ) { - scroll(); - y--; - } - } - } - } - - RM_SCREEN_INFO.orig_x = x; - RM_SCREEN_INFO.orig_y = y; - - pos = (x + cols * y) * 2; /* Update cursor position */ - outb_p(14, vidport); - outb_p(0xff & (pos >> 9), vidport+1); - outb_p(15, vidport); - outb_p(0xff & (pos >> 1), vidport+1); -} - -static void* memset(void* s, int c, size_t n) -{ - int i; - char *ss = (char*)s; - - for (i=0;i<n;i++) ss[i] = c; - return s; -} - -static void* memcpy(void* __dest, __const void* __src, - size_t __n) -{ - int i; - char *d = (char *)__dest, *s = (char *)__src; - - for (i=0;i<__n;i++) d[i] = s[i]; - return __dest; -} - -/* =========================================================================== - * Fill the input buffer. This is called only when the buffer is empty - * and at least one byte is really needed. - */ -static int fill_inbuf(void) -{ - if (insize != 0) { - error("ran out of input data"); - } - - inbuf = input_data; - insize = input_len; - inptr = 1; - return inbuf[0]; -} - -/* =========================================================================== - * Write the output window window[0..outcnt-1] and update crc and bytes_out. - * (Used for the decompressed data only.) - */ -static void flush_window_low(void) -{ - ulg c = crc; /* temporary variable */ - unsigned n; - uch *in, *out, ch; - - in = window; - out = &output_data[output_ptr]; - for (n = 0; n < outcnt; n++) { - ch = *out++ = *in++; - c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); - } - crc = c; - bytes_out += (ulg)outcnt; - output_ptr += (ulg)outcnt; - outcnt = 0; -} - -static void flush_window_high(void) -{ - ulg c = crc; /* temporary variable */ - unsigned n; - uch *in, ch; - in = window; - for (n = 0; n < outcnt; n++) { - ch = *output_data++ = *in++; - if ((ulg)output_data == low_buffer_end) output_data=high_buffer_start; - c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); - } - crc = c; - bytes_out += (ulg)outcnt; - outcnt = 0; -} - -static void flush_window(void) -{ - if (high_loaded) flush_window_high(); - else flush_window_low(); -} - -static void error(char *x) -{ - putstr("\n\n"); - putstr(x); - putstr("\n\n -- System halted"); - - while(1); /* Halt */ -} - -#define STACK_SIZE (4096) - -long user_stack [STACK_SIZE]; - -struct { - long * a; - short b; - } stack_start = { & user_stack [STACK_SIZE] , __BOOT_DS }; - -static void setup_normal_output_buffer(void) -{ -#ifdef STANDARD_MEMORY_BIOS_CALL - if (RM_EXT_MEM_K < 1024) error("Less than 2MB of memory"); -#else - if ((RM_ALT_MEM_K > RM_EXT_MEM_K ? RM_ALT_MEM_K : RM_EXT_MEM_K) < 1024) error("Less than 2MB of memory"); -#endif - output_data = (char *)__PHYSICAL_START; /* Normally Points to 1M */ - free_mem_end_ptr = (long)real_mode; -} - -struct moveparams { - uch *low_buffer_start; int lcount; - uch *high_buffer_start; int hcount; -}; - -static void setup_output_buffer_if_we_run_high(struct moveparams *mv) -{ - high_buffer_start = (uch *)(((ulg)&end) + HEAP_SIZE); -#ifdef STANDARD_MEMORY_BIOS_CALL - if (RM_EXT_MEM_K < (3*1024)) error("Less than 4MB of memory"); -#else - if ((RM_ALT_MEM_K > RM_EXT_MEM_K ? RM_ALT_MEM_K : RM_EXT_MEM_K) < - (3*1024)) - error("Less than 4MB of memory"); -#endif - mv->low_buffer_start = output_data = (char *)LOW_BUFFER_START; - low_buffer_end = ((unsigned int)real_mode > LOW_BUFFER_MAX - ? LOW_BUFFER_MAX : (unsigned int)real_mode) & ~0xfff; - low_buffer_size = low_buffer_end - LOW_BUFFER_START; - high_loaded = 1; - free_mem_end_ptr = (long)high_buffer_start; - if ( (__PHYSICAL_START + low_buffer_size) > ((ulg)high_buffer_start)) { - high_buffer_start = (uch *)(__PHYSICAL_START + low_buffer_size); - mv->hcount = 0; /* say: we need not to move high_buffer */ - } - else mv->hcount = -1; - mv->high_buffer_start = high_buffer_start; -} - -static void close_output_buffer_if_we_run_high(struct moveparams *mv) -{ - if (bytes_out > low_buffer_size) { - mv->lcount = low_buffer_size; - if (mv->hcount) - mv->hcount = bytes_out - low_buffer_size; - } else { - mv->lcount = bytes_out; - mv->hcount = 0; - } -} - -asmlinkage int decompress_kernel(struct moveparams *mv, void *rmode) -{ - real_mode = rmode; - - if (RM_SCREEN_INFO.orig_video_mode == 7) { - vidmem = (char *) 0xb0000; - vidport = 0x3b4; - } else { - vidmem = (char *) 0xb8000; - vidport = 0x3d4; - } - - lines = RM_SCREEN_INFO.orig_video_lines; - cols = RM_SCREEN_INFO.orig_video_cols; - - if (free_mem_ptr < 0x100000) setup_normal_output_buffer(); - else setup_output_buffer_if_we_run_high(mv); - - makecrc(); - putstr("Uncompressing Linux... "); - gunzip(); - putstr("Ok, booting the kernel.\n"); - if (high_loaded) close_output_buffer_if_we_run_high(mv); - return high_loaded; -} diff --git a/arch/i386/boot/compressed/vmlinux.scr b/arch/i386/boot/compressed/vmlinux.scr deleted file mode 100644 index 1ed9d791f86..00000000000 --- a/arch/i386/boot/compressed/vmlinux.scr +++ /dev/null @@ -1,9 +0,0 @@ -SECTIONS -{ - .data : { - input_len = .; - LONG(input_data_end - input_data) input_data = .; - *(.data) - input_data_end = .; - } -} |