diff options
Diffstat (limited to 'arch/frv/mb93090-mb00')
| -rw-r--r-- | arch/frv/mb93090-mb00/Makefile | 4 | ||||
| -rw-r--r-- | arch/frv/mb93090-mb00/flash.c | 90 | ||||
| -rw-r--r-- | arch/frv/mb93090-mb00/pci-dma-nommu.c | 40 | ||||
| -rw-r--r-- | arch/frv/mb93090-mb00/pci-dma.c | 35 | ||||
| -rw-r--r-- | arch/frv/mb93090-mb00/pci-frv.c | 82 | ||||
| -rw-r--r-- | arch/frv/mb93090-mb00/pci-frv.h | 5 | ||||
| -rw-r--r-- | arch/frv/mb93090-mb00/pci-iomap.c | 29 | ||||
| -rw-r--r-- | arch/frv/mb93090-mb00/pci-irq.c | 7 | ||||
| -rw-r--r-- | arch/frv/mb93090-mb00/pci-vdk.c | 115 |
9 files changed, 179 insertions, 228 deletions
diff --git a/arch/frv/mb93090-mb00/Makefile b/arch/frv/mb93090-mb00/Makefile index 76595e87073..21f1df1b378 100644 --- a/arch/frv/mb93090-mb00/Makefile +++ b/arch/frv/mb93090-mb00/Makefile @@ -3,7 +3,7 @@ # ifeq "$(CONFIG_PCI)" "y" -obj-y := pci-frv.o pci-irq.o pci-vdk.o pci-iomap.o +obj-y := pci-frv.o pci-irq.o pci-vdk.o ifeq "$(CONFIG_MMU)" "y" obj-y += pci-dma.o @@ -11,3 +11,5 @@ else obj-y += pci-dma-nommu.o endif endif + +obj-$(CONFIG_MTD) += flash.o diff --git a/arch/frv/mb93090-mb00/flash.c b/arch/frv/mb93090-mb00/flash.c new file mode 100644 index 00000000000..c0e3707c229 --- /dev/null +++ b/arch/frv/mb93090-mb00/flash.c @@ -0,0 +1,90 @@ +/* Flash mappings for the MB93090-MB00 motherboard + * + * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> + +#define MB93090_BOOTROM_ADDR 0xFF000000 /* Boot ROM */ +#define MB93090_BOOTROM_SIZE (2 * 1024 * 1024) +#define MB93090_USERROM_ADDR 0xFF200000 /* User ROM */ +#define MB93090_USERROM_SIZE (2 * 1024 * 1024) + +/* + * default MTD partition table for both main flash devices, expected to be + * overridden by RedBoot + */ +static struct mtd_partition mb93090_partitions[] = { + { + .name = "Filesystem", + .size = MTDPART_SIZ_FULL, + .offset = 0, + } +}; + +/* + * Definition of the MB93090 Boot ROM (on the CPU card) + */ +static struct physmap_flash_data mb93090_bootrom_data = { + .width = 2, + .nr_parts = 2, + .parts = mb93090_partitions, +}; + +static struct resource mb93090_bootrom_resource = { + .start = MB93090_BOOTROM_ADDR, + .end = MB93090_BOOTROM_ADDR + MB93090_BOOTROM_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device mb93090_bootrom = { + .name = "physmap-flash", + .id = 0, + .dev.platform_data = &mb93090_bootrom_data, + .num_resources = 1, + .resource = &mb93090_bootrom_resource, +}; + +/* + * Definition of the MB93090 User ROM definition (on the motherboard) + */ +static struct physmap_flash_data mb93090_userrom_data = { + .width = 2, + .nr_parts = 2, + .parts = mb93090_partitions, +}; + +static struct resource mb93090_userrom_resource = { + .start = MB93090_USERROM_ADDR, + .end = MB93090_USERROM_ADDR + MB93090_USERROM_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device mb93090_userrom = { + .name = "physmap-flash", + .id = 1, + .dev.platform_data = &mb93090_userrom_data, + .num_resources = 1, + .resource = &mb93090_userrom_resource, +}; + +/* + * register the MB93090 flashes + */ +static int __init mb93090_mtd_init(void) +{ + platform_device_register(&mb93090_bootrom); + platform_device_register(&mb93090_userrom); + return 0; +} + +module_init(mb93090_mtd_init); diff --git a/arch/frv/mb93090-mb00/pci-dma-nommu.c b/arch/frv/mb93090-mb00/pci-dma-nommu.c index 64ee58d748b..b99c2a7cc7a 100644 --- a/arch/frv/mb93090-mb00/pci-dma-nommu.c +++ b/arch/frv/mb93090-mb00/pci-dma-nommu.c @@ -11,6 +11,7 @@ #include <linux/types.h> #include <linux/slab.h> +#include <linux/export.h> #include <linux/dma-mapping.h> #include <linux/list.h> #include <linux/pci.h> @@ -106,18 +107,10 @@ void dma_free_coherent(struct device *hwdev, size_t size, void *vaddr, dma_addr_ EXPORT_SYMBOL(dma_free_coherent); -/* - * Map a single buffer of the indicated size for DMA in streaming mode. - * The 32-bit bus address to use is returned. - * - * Once the device is given the dma address, the device owns this memory - * until either pci_unmap_single or pci_dma_sync_single is performed. - */ dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, enum dma_data_direction direction) { - if (direction == DMA_NONE) - BUG(); + BUG_ON(direction == DMA_NONE); frv_cache_wback_inv((unsigned long) ptr, (unsigned long) ptr + size); @@ -126,22 +119,6 @@ dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, EXPORT_SYMBOL(dma_map_single); -/* - * Map a set of buffers described by scatterlist in streaming - * mode for DMA. This is the scather-gather version of the - * above pci_map_single interface. Here the scatter gather list - * elements are each tagged with the appropriate dma address - * and length. They are obtained via sg_dma_{address,length}(SG). - * - * NOTE: An implementation may be able to use a smaller number of - * DMA address/length pairs than there are SG table elements. - * (for example via virtual mapping capabilities) - * The routine returns the number of addr/length pairs actually - * used, at most nents. - * - * Device ownership issues as mentioned above for pci_map_single are - * the same here. - */ int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, enum dma_data_direction direction) { @@ -151,10 +128,19 @@ int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, frv_cache_wback_inv(sg_dma_address(&sg[i]), sg_dma_address(&sg[i]) + sg_dma_len(&sg[i])); - if (direction == DMA_NONE) - BUG(); + BUG_ON(direction == DMA_NONE); return nents; } EXPORT_SYMBOL(dma_map_sg); + +dma_addr_t dma_map_page(struct device *dev, struct page *page, unsigned long offset, + size_t size, enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + flush_dcache_page(page); + return (dma_addr_t) page_to_phys(page) + offset; +} + +EXPORT_SYMBOL(dma_map_page); diff --git a/arch/frv/mb93090-mb00/pci-dma.c b/arch/frv/mb93090-mb00/pci-dma.c index 662f7b12d00..82478979ac9 100644 --- a/arch/frv/mb93090-mb00/pci-dma.c +++ b/arch/frv/mb93090-mb00/pci-dma.c @@ -10,10 +10,10 @@ */ #include <linux/types.h> -#include <linux/slab.h> #include <linux/dma-mapping.h> #include <linux/list.h> #include <linux/pci.h> +#include <linux/export.h> #include <linux/highmem.h> #include <linux/scatterlist.h> #include <asm/io.h> @@ -38,18 +38,10 @@ void dma_free_coherent(struct device *hwdev, size_t size, void *vaddr, dma_addr_ EXPORT_SYMBOL(dma_free_coherent); -/* - * Map a single buffer of the indicated size for DMA in streaming mode. - * The 32-bit bus address to use is returned. - * - * Once the device is given the dma address, the device owns this memory - * until either pci_unmap_single or pci_dma_sync_single is performed. - */ dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, enum dma_data_direction direction) { - if (direction == DMA_NONE) - BUG(); + BUG_ON(direction == DMA_NONE); frv_cache_wback_inv((unsigned long) ptr, (unsigned long) ptr + size); @@ -58,22 +50,6 @@ dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, EXPORT_SYMBOL(dma_map_single); -/* - * Map a set of buffers described by scatterlist in streaming - * mode for DMA. This is the scather-gather version of the - * above pci_map_single interface. Here the scatter gather list - * elements are each tagged with the appropriate dma address - * and length. They are obtained via sg_dma_{address,length}(SG). - * - * NOTE: An implementation may be able to use a smaller number of - * DMA address/length pairs than there are SG table elements. - * (for example via virtual mapping capabilities) - * The routine returns the number of addr/length pairs actually - * used, at most nents. - * - * Device ownership issues as mentioned above for pci_map_single are - * the same here. - */ int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, enum dma_data_direction direction) { @@ -81,20 +57,19 @@ int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, void *vaddr; int i; - if (direction == DMA_NONE) - BUG(); + BUG_ON(direction == DMA_NONE); dampr2 = __get_DAMPR(2); for (i = 0; i < nents; i++) { - vaddr = kmap_atomic(sg_page(&sg[i]), __KM_CACHE); + vaddr = kmap_atomic_primary(sg_page(&sg[i])); frv_dcache_writeback((unsigned long) vaddr, (unsigned long) vaddr + PAGE_SIZE); } - kunmap_atomic(vaddr, __KM_CACHE); + kunmap_atomic_primary(vaddr); if (dampr2) { __set_DAMPR(2, dampr2); __set_IAMPR(2, dampr2); diff --git a/arch/frv/mb93090-mb00/pci-frv.c b/arch/frv/mb93090-mb00/pci-frv.c index edae117fcc2..67b1d168575 100644 --- a/arch/frv/mb93090-mb00/pci-frv.c +++ b/arch/frv/mb93090-mb00/pci-frv.c @@ -32,18 +32,16 @@ * but we want to try to avoid allocating at 0x2900-0x2bff * which might have be mirrored at 0x0100-0x03ff.. */ -void -pcibios_align_resource(void *data, struct resource *res, +resource_size_t +pcibios_align_resource(void *data, const struct resource *res, resource_size_t size, resource_size_t align) { - if (res->flags & IORESOURCE_IO) { - resource_size_t start = res->start; + resource_size_t start = res->start; - if (start & 0x300) { - start = (start + 0x3ff) & ~0x3ff; - res->start = start; - } - } + if ((res->flags & IORESOURCE_IO) && (start & 0x300)) + start = (start + 0x3ff) & ~0x3ff; + + return start; } @@ -86,19 +84,17 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list) struct pci_bus *bus; struct pci_dev *dev; int idx; - struct resource *r, *pr; + struct resource *r; /* Depth-First Search on bus tree */ for (ln=bus_list->next; ln != bus_list; ln=ln->next) { - bus = pci_bus_b(ln); + bus = list_entry(ln, struct pci_bus, node); if ((dev = bus->self)) { for (idx = PCI_BRIDGE_RESOURCES; idx < PCI_NUM_RESOURCES; idx++) { r = &dev->resource[idx]; if (!r->start) continue; - pr = pci_find_parent_resource(dev, r); - if (!pr || request_resource(pr, r) < 0) - printk(KERN_ERR "PCI: Cannot allocate resource region %d of bridge %s\n", idx, pci_name(dev)); + pci_claim_resource(dev, idx); } } pcibios_allocate_bus_resources(&bus->children); @@ -110,7 +106,7 @@ static void __init pcibios_allocate_resources(int pass) struct pci_dev *dev = NULL; int idx, disabled; u16 command; - struct resource *r, *pr; + struct resource *r; for_each_pci_dev(dev) { pci_read_config_word(dev, PCI_COMMAND, &command); @@ -127,9 +123,7 @@ static void __init pcibios_allocate_resources(int pass) if (pass == disabled) { DBG("PCI: Resource %08lx-%08lx (f=%lx, d=%d, p=%d)\n", r->start, r->end, r->flags, disabled, pass); - pr = pci_find_parent_resource(dev, r); - if (!pr || request_resource(pr, r) < 0) { - printk(KERN_ERR "PCI: Cannot allocate resource region %d of device %s\n", idx, pci_name(dev)); + if (pci_claim_resource(dev, idx) < 0) { /* We'll assign a new address later */ r->end -= r->start; r->start = 0; @@ -200,55 +194,3 @@ void __init pcibios_resource_survey(void) pcibios_allocate_resources(1); pcibios_assign_resources(); } - -int pcibios_enable_resources(struct pci_dev *dev, int mask) -{ - u16 cmd, old_cmd; - int idx; - struct resource *r; - - pci_read_config_word(dev, PCI_COMMAND, &cmd); - old_cmd = cmd; - for(idx=0; idx<6; idx++) { - /* Only set up the requested stuff */ - if (!(mask & (1<<idx))) - continue; - - r = &dev->resource[idx]; - if (!r->start && r->end) { - printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev)); - return -EINVAL; - } - if (r->flags & IORESOURCE_IO) - cmd |= PCI_COMMAND_IO; - if (r->flags & IORESOURCE_MEM) - cmd |= PCI_COMMAND_MEMORY; - } - if (dev->resource[PCI_ROM_RESOURCE].start) - cmd |= PCI_COMMAND_MEMORY; - if (cmd != old_cmd) { - printk("PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd); - pci_write_config_word(dev, PCI_COMMAND, cmd); - } - return 0; -} - -/* - * If we set up a device for bus mastering, we need to check the latency - * timer as certain crappy BIOSes forget to set it properly. - */ -unsigned int pcibios_max_latency = 255; - -void pcibios_set_master(struct pci_dev *dev) -{ - u8 lat; - pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); - if (lat < 16) - lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; - else if (lat > pcibios_max_latency) - lat = pcibios_max_latency; - else - return; - printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n", pci_name(dev), lat); - pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); -} diff --git a/arch/frv/mb93090-mb00/pci-frv.h b/arch/frv/mb93090-mb00/pci-frv.h index 0c7bf39dc72..a7e487fe76e 100644 --- a/arch/frv/mb93090-mb00/pci-frv.h +++ b/arch/frv/mb93090-mb00/pci-frv.h @@ -26,15 +26,10 @@ extern unsigned int __nongpreldata pci_probe; /* pci-frv.c */ -extern unsigned int pcibios_max_latency; - void pcibios_resource_survey(void); -int pcibios_enable_resources(struct pci_dev *, int); /* pci-vdk.c */ -extern int __nongpreldata pcibios_last_bus; -extern struct pci_bus *__nongpreldata pci_root_bus; extern struct pci_ops *__nongpreldata pci_root_ops; /* pci-irq.c */ diff --git a/arch/frv/mb93090-mb00/pci-iomap.c b/arch/frv/mb93090-mb00/pci-iomap.c deleted file mode 100644 index 35f6df28351..00000000000 --- a/arch/frv/mb93090-mb00/pci-iomap.c +++ /dev/null @@ -1,29 +0,0 @@ -/* pci-iomap.c: description - * - * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <linux/pci.h> -#include <linux/module.h> - -void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) -{ - resource_size_t start = pci_resource_start(dev, bar); - resource_size_t len = pci_resource_len(dev, bar); - unsigned long flags = pci_resource_flags(dev, bar); - - if (!len || !start) - return NULL; - - if ((flags & IORESOURCE_IO) || (flags & IORESOURCE_MEM)) - return (void __iomem *) start; - - return NULL; -} - -EXPORT_SYMBOL(pci_iomap); diff --git a/arch/frv/mb93090-mb00/pci-irq.c b/arch/frv/mb93090-mb00/pci-irq.c index ba587523c01..1c35c93f942 100644 --- a/arch/frv/mb93090-mb00/pci-irq.c +++ b/arch/frv/mb93090-mb00/pci-irq.c @@ -9,7 +9,6 @@ #include <linux/kernel.h> #include <linux/pci.h> #include <linux/init.h> -#include <linux/slab.h> #include <linux/interrupt.h> #include <linux/irq.h> @@ -29,7 +28,7 @@ * */ -static const uint8_t __initdata pci_bus0_irq_routing[32][4] = { +static const uint8_t __initconst pci_bus0_irq_routing[32][4] = { [0 ] = { IRQ_FPGA_MB86943_PCI_INTA }, [16] = { IRQ_FPGA_RTL8029_INTA }, [17] = { IRQ_FPGA_PCI_INTC, IRQ_FPGA_PCI_INTD, IRQ_FPGA_PCI_INTA, IRQ_FPGA_PCI_INTB }, @@ -56,10 +55,6 @@ void __init pcibios_fixup_irqs(void) } } -void __init pcibios_penalize_isa_irq(int irq) -{ -} - void pcibios_enable_irq(struct pci_dev *dev) { pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); diff --git a/arch/frv/mb93090-mb00/pci-vdk.c b/arch/frv/mb93090-mb00/pci-vdk.c index f003cfa68b7..efa5d65b000 100644 --- a/arch/frv/mb93090-mb00/pci-vdk.c +++ b/arch/frv/mb93090-mb00/pci-vdk.c @@ -16,7 +16,6 @@ #include <linux/init.h> #include <linux/ioport.h> #include <linux/delay.h> -#include <linux/slab.h> #include <asm/segment.h> #include <asm/io.h> @@ -26,11 +25,32 @@ unsigned int __nongpreldata pci_probe = 1; -int __nongpreldata pcibios_last_bus = -1; -struct pci_bus *__nongpreldata pci_root_bus; struct pci_ops *__nongpreldata pci_root_ops; /* + * The accessible PCI window does not cover the entire CPU address space, but + * there are devices we want to access outside of that window, so we need to + * insert specific PCI bus resources instead of using the platform-level bus + * resources directly for the PCI root bus. + * + * These are configured and inserted by pcibios_init() and are attached to the + * root bus by pcibios_fixup_bus(). + */ +static struct resource pci_ioport_resource = { + .name = "PCI IO", + .start = 0, + .end = IO_SPACE_LIMIT, + .flags = IORESOURCE_IO, +}; + +static struct resource pci_iomem_resource = { + .name = "PCI mem", + .start = 0, + .end = -1, + .flags = IORESOURCE_MEM, +}; + +/* * Functions for accessing PCI configuration space */ @@ -199,37 +219,6 @@ static struct pci_ops * __init pci_check_direct(void) } /* - * Discover remaining PCI buses in case there are peer host bridges. - * We use the number of last PCI bus provided by the PCI BIOS. - */ -static void __init pcibios_fixup_peer_bridges(void) -{ - struct pci_bus bus; - struct pci_dev dev; - int n; - u16 l; - - if (pcibios_last_bus <= 0 || pcibios_last_bus >= 0xff) - return; - printk("PCI: Peer bridge fixup\n"); - for (n=0; n <= pcibios_last_bus; n++) { - if (pci_find_bus(0, n)) - continue; - bus.number = n; - bus.ops = pci_root_ops; - dev.bus = &bus; - for(dev.devfn=0; dev.devfn<256; dev.devfn += 8) - if (!pci_read_config_word(&dev, PCI_VENDOR_ID, &l) && - l != 0x0000 && l != 0xffff) { - printk("Found device at %02x:%02x [%04x]\n", n, dev.devfn, l); - printk("PCI: Discovered peer bus %02x\n", n); - pci_scan_bus(n, pci_root_ops, NULL); - break; - } - } -} - -/* * Exceptions for specific devices. Usually work-arounds for fatal design flaws. */ @@ -246,7 +235,7 @@ static void __init pci_fixup_umc_ide(struct pci_dev *d) d->resource[i].flags |= PCI_BASE_ADDRESS_SPACE_IO; } -static void __init pci_fixup_ide_bases(struct pci_dev *d) +static void pci_fixup_ide_bases(struct pci_dev *d) { int i; @@ -265,7 +254,7 @@ static void __init pci_fixup_ide_bases(struct pci_dev *d) } } -static void __init pci_fixup_ide_trash(struct pci_dev *d) +static void pci_fixup_ide_trash(struct pci_dev *d) { int i; @@ -278,7 +267,7 @@ static void __init pci_fixup_ide_trash(struct pci_dev *d) d->resource[i].start = d->resource[i].end = d->resource[i].flags = 0; } -static void __devinit pci_fixup_latency(struct pci_dev *d) +static void pci_fixup_latency(struct pci_dev *d) { /* * SiS 5597 and 5598 chipsets require latency timer set to @@ -299,18 +288,17 @@ DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases); * are examined. */ -void __init pcibios_fixup_bus(struct pci_bus *bus) +void pcibios_fixup_bus(struct pci_bus *bus) { #if 0 printk("### PCIBIOS_FIXUP_BUS(%d)\n",bus->number); #endif + pci_read_bridge_bases(bus); if (bus->number == 0) { - struct list_head *ln; struct pci_dev *dev; - for (ln=bus->devices.next; ln != &bus->devices; ln=ln->next) { - dev = pci_dev_b(ln); + list_for_each_entry(dev, &bus->devices, bus_list) { if (dev->devfn == 0) { dev->resource[0].start = 0; dev->resource[0].end = 0; @@ -329,6 +317,7 @@ void __init pcibios_fixup_bus(struct pci_bus *bus) int __init pcibios_init(void) { struct pci_ops *dir = NULL; + LIST_HEAD(resources); if (!mb93090_mb00_detected) return -ENXIO; @@ -350,28 +339,36 @@ int __init pcibios_init(void) /* enable PCI arbitration */ __reg_MB86943_pci_arbiter = MB86943_PCIARB_EN; - ioport_resource.start = (__reg_MB86943_sl_pci_io_base << 9) & 0xfffffc00; - ioport_resource.end = (__reg_MB86943_sl_pci_io_range << 9) | 0x3ff; - ioport_resource.end += ioport_resource.start; + pci_ioport_resource.start = (__reg_MB86943_sl_pci_io_base << 9) & 0xfffffc00; + pci_ioport_resource.end = (__reg_MB86943_sl_pci_io_range << 9) | 0x3ff; + pci_ioport_resource.end += pci_ioport_resource.start; printk("PCI IO window: %08llx-%08llx\n", - (unsigned long long) ioport_resource.start, - (unsigned long long) ioport_resource.end); - - iomem_resource.start = (__reg_MB86943_sl_pci_mem_base << 9) & 0xfffffc00; + (unsigned long long) pci_ioport_resource.start, + (unsigned long long) pci_ioport_resource.end); - /* Reserve somewhere to write to flush posted writes. */ - iomem_resource.start += 0x400; + pci_iomem_resource.start = (__reg_MB86943_sl_pci_mem_base << 9) & 0xfffffc00; + pci_iomem_resource.end = (__reg_MB86943_sl_pci_mem_range << 9) | 0x3ff; + pci_iomem_resource.end += pci_iomem_resource.start; - iomem_resource.end = (__reg_MB86943_sl_pci_mem_range << 9) | 0x3ff; - iomem_resource.end += iomem_resource.start; + /* Reserve somewhere to write to flush posted writes. This is used by + * __flush_PCI_writes() from asm/io.h to force the write FIFO in the + * CPU-PCI bridge to flush as this doesn't happen automatically when a + * read is performed on the MB93090 development kit motherboard. + */ + pci_iomem_resource.start += 0x400; printk("PCI MEM window: %08llx-%08llx\n", - (unsigned long long) iomem_resource.start, - (unsigned long long) iomem_resource.end); + (unsigned long long) pci_iomem_resource.start, + (unsigned long long) pci_iomem_resource.end); printk("PCI DMA memory: %08lx-%08lx\n", dma_coherent_mem_start, dma_coherent_mem_end); + if (insert_resource(&iomem_resource, &pci_iomem_resource) < 0) + panic("Unable to insert PCI IOMEM resource\n"); + if (insert_resource(&ioport_resource, &pci_ioport_resource) < 0) + panic("Unable to insert PCI IOPORT resource\n"); + if (!pci_probe) return -ENXIO; @@ -384,10 +381,11 @@ int __init pcibios_init(void) } printk("PCI: Probing PCI hardware\n"); - pci_root_bus = pci_scan_bus(0, pci_root_ops, NULL); + pci_add_resource(&resources, &pci_ioport_resource); + pci_add_resource(&resources, &pci_iomem_resource); + pci_scan_root_bus(NULL, 0, pci_root_ops, NULL, &resources); pcibios_irq_init(); - pcibios_fixup_peer_bridges(); pcibios_fixup_irqs(); pcibios_resource_survey(); @@ -401,9 +399,6 @@ char * __init pcibios_setup(char *str) if (!strcmp(str, "off")) { pci_probe = 0; return NULL; - } else if (!strncmp(str, "lastbus=", 8)) { - pcibios_last_bus = simple_strtol(str+8, NULL, 0); - return NULL; } return str; } @@ -412,7 +407,7 @@ int pcibios_enable_device(struct pci_dev *dev, int mask) { int err; - if ((err = pcibios_enable_resources(dev, mask)) < 0) + if ((err = pci_enable_resources(dev, mask)) < 0) return err; if (!dev->msi_enabled) pcibios_enable_irq(dev); |