diff options
Diffstat (limited to 'arch/cris/arch-v10/kernel/head.S')
| -rw-r--r-- | arch/cris/arch-v10/kernel/head.S | 352 |
1 files changed, 105 insertions, 247 deletions
diff --git a/arch/cris/arch-v10/kernel/head.S b/arch/cris/arch-v10/kernel/head.S index d946d8b8d27..4a146e1749c 100644 --- a/arch/cris/arch-v10/kernel/head.S +++ b/arch/cris/arch-v10/kernel/head.S @@ -1,192 +1,14 @@ -/* $Id: head.S,v 1.10 2005/06/20 05:12:54 starvik Exp $ - * +/* * Head of the kernel - alter with care * - * Copyright (C) 2000, 2001 Axis Communications AB - * - * Authors: Bjorn Wesen (bjornw@axis.com) - * - * $Log: head.S,v $ - * Revision 1.10 2005/06/20 05:12:54 starvik - * Remove unnecessary diff to kernel.org tree - * - * Revision 1.9 2004/12/13 12:21:51 starvik - * Added I/O and DMA allocators from Linux 2.4 - * - * Revision 1.8 2004/11/22 11:41:14 starvik - * Kernel command line may be supplied to kernel. Not used by Axis but may - * be used by customers. - * - * Revision 1.7 2004/05/14 07:58:01 starvik - * Merge of changes from 2.4 - * - * Revision 1.6 2003/04/28 05:31:46 starvik - * Added section attributes - * - * Revision 1.5 2002/12/11 15:42:02 starvik - * Extracted v10 (ETRAX 100LX) specific stuff from arch/cris/kernel/*.c - * - * Revision 1.4 2002/11/07 09:00:44 starvik - * Names changed for init sections - * init_task_union -> init_thread_union - * - * Revision 1.3 2002/02/05 15:38:23 bjornw - * Oops.. non-CRAMFS_MAGIC should jump over the copying, not into it... - * - * Revision 1.2 2001/12/18 13:35:19 bjornw - * Applied the 2.4.13->2.4.16 CRIS patch to 2.5.1 (is a copy of 2.4.15). - * - * Revision 1.43 2001/11/08 15:09:43 starvik - * Only start MII clock if Ethernet is configured - * - * Revision 1.42 2001/11/08 14:37:34 starvik - * Start MII clock early to make sure that it is running at tranceiver reset - * - * Revision 1.41 2001/10/29 14:55:58 pkj - * Corrected pa$r0 to par0. - * - * Revision 1.40 2001/10/03 14:59:57 pkj - * Added support for resetting the Bluetooth hardware. - * - * Revision 1.39 2001/10/01 14:45:03 bjornw - * Removed underscores and added register prefixes - * - * Revision 1.38 2001/09/21 07:14:11 jonashg - * Made root filesystem (cramfs) use mtdblock driver when booting from flash. - * - * Revision 1.37 2001/09/11 13:44:29 orjanf - * Decouple usage of serial ports for debug and kgdb. - * - * Revision 1.36 2001/06/29 12:39:31 pkj - * Added support for mirroring the first flash to just below the - * second one, to make them look consecutive to cramfs. - * - * Revision 1.35 2001/06/25 14:07:00 hp - * Fix review comment. - * * head.S: Use IO_STATE, IO_FIELD and IO_MASK constructs instead of - * magic numbers. Add comment that -traditional must not be used. - * * entry.S (SYMBOL_NAME): Change redefinition to use ## concatenation. - * Correct and update comment. - * * Makefile (.S.o): Don't use -traditional. Add comment why the - * toplevel rule can't be used (now that there's a reason). - * - * Revision 1.34 2001/05/15 07:08:14 hp - * Tweak "notice" to reflect that both r8 r9 are used - * - * Revision 1.33 2001/05/15 06:40:05 hp - * Put bulk of code in .text.init, data in .data.init - * - * Revision 1.32 2001/05/15 06:18:56 hp - * Execute review comment: s/bcc/bhs/g; s/bcs/blo/g - * - * Revision 1.31 2001/05/15 06:08:40 hp - * Add sentence about autodetecting the bit31-MMU-bug - * - * Revision 1.30 2001/05/15 06:00:05 hp - * Update comment: LOW_MAP is not forced on xsim anymore. - * - * Revision 1.29 2001/04/18 12:51:59 orjanf - * * Reverted review change regarding the use of bcs/bcc. - * * Removed non-working LED-clearing code. - * - * Revision 1.28 2001/04/17 13:58:39 orjanf - * * Renamed CONFIG_KGDB to CONFIG_ETRAX_KGDB. - * - * Revision 1.27 2001/04/17 11:42:35 orjanf - * Changed according to review: - * * Added comment explaining memory map bug. - * * Changed bcs and bcc to blo and bhs, respectively. - * * Removed mentioning of Stallone and Olga boards. - * - * Revision 1.26 2001/04/06 12:31:07 jonashg - * Check for cramfs in flash before RAM instead of RAM before flash. - * - * Revision 1.25 2001/04/04 06:23:53 starvik - * Initialize DRAM if not already initialized - * - * Revision 1.24 2001/04/03 11:12:00 starvik - * Removed dram init (done by rescue or etrax100boot - * Corrected include - * - * Revision 1.23 2001/04/03 09:53:03 starvik - * Include hw_settings.S - * - * Revision 1.22 2001/03/26 14:23:26 bjornw - * Namechange of some config options - * - * Revision 1.21 2001/03/08 12:14:41 bjornw - * * Config name for ETRAX IDE was renamed - * * Removed G27 auto-setting when JULIETTE is chosen (need to make this - * a new config option later) - * - * Revision 1.20 2001/02/23 12:47:56 bjornw - * MMU regs during LOW_MAP updated to reflect a newer reality - * - * Revision 1.19 2001/02/19 11:12:07 bjornw - * Changed comment header format - * - * Revision 1.18 2001/02/15 07:25:38 starvik - * Added support for synchronous serial ports - * - * Revision 1.17 2001/02/08 15:53:13 starvik - * Last commit removed some important ifdefs - * - * Revision 1.16 2001/02/08 15:20:38 starvik - * Include dram_init.S as inline - * - * Revision 1.15 2001/01/29 18:12:01 bjornw - * Corrected some comments - * - * Revision 1.14 2001/01/29 13:11:29 starvik - * Include dram_init.S (with DRAM/SDRAM initialization) - * - * Revision 1.13 2001/01/23 14:54:57 markusl - * Updated for USB - * i.e. added r_gen_config settings - * - * Revision 1.12 2001/01/19 16:16:29 perf - * Added temporary mapping of 0x0c->0x0c to avoid flash loading confusion. - * Renamed serial options from ETRAX100 to ETRAX. - * - * Revision 1.11 2001/01/16 16:31:38 bjornw - * * Changed name and semantics of running_from_flash to romfs_in_flash, - * set by head.S to indicate to setup.c whether there is a cramfs image - * after the kernels BSS or not. Should work for all three boot-cases - * (DRAM with cramfs in DRAM, DRAM with cramfs in flash (compressed boot), - * and flash with cramfs in flash) - * - * Revision 1.10 2001/01/16 14:12:21 bjornw - * * Check for cramfs start passed in r9 from the decompressor, if all other - * cramfs options fail (if we boot from DRAM but don't find a cramfs image - * after the kernel in DRAM, it is probably still in the flash) - * * Check magic in cramfs detection when booting from flash directly - * - * Revision 1.9 2001/01/15 17:17:02 bjornw - * * Corrected the code that detects the cramfs lengths - * * Added a comment saying that the above does not work due to other - * reasons.. - * - * Revision 1.8 2001/01/15 16:27:51 jonashg - * Made boot after flashing work. - * * end destination is __vmlinux_end in RAM. - * * _romfs_start moved because of virtual memory. - * - * Revision 1.7 2000/11/21 13:55:29 bjornw - * Use CONFIG_CRIS_LOW_MAP for the low VM map instead of explicit CPU type - * - * Revision 1.6 2000/10/06 12:36:55 bjornw - * Forgot swapper_pg_dir when changing memory map.. - * - * Revision 1.5 2000/10/04 16:49:30 bjornw - * * Fixed memory mapping in LX - * * Check for cramfs instead of romfs + * Copyright (C) 2000, 2001, 2010 Axis Communications AB * */ - + #define ASSEMBLER_MACROS_ONLY /* The IO_* macros use the ## token concatenation operator, so -traditional must not be used when assembling this file. */ -#include <asm/arch/sv_addr_ag.h> +#include <arch/sv_addr_ag.h> #define CRAMFS_MAGIC 0x28cd3d45 #define RAM_INIT_MAGIC 0x56902387 @@ -194,15 +16,15 @@ #define START_ETHERNET_CLOCK IO_STATE(R_NETWORK_GEN_CONFIG, enable, on) |\ IO_STATE(R_NETWORK_GEN_CONFIG, phy, mii_clk) - + ;; exported symbols - + .globl etrax_irv .globl romfs_start .globl romfs_length .globl romfs_in_flash .globl swapper_pg_dir - + .text ;; This is the entry point of the kernel. We are in supervisor mode. @@ -211,10 +33,10 @@ ;; put a nop (2 bytes) here first so we dont accidentally skip the di ;; ;; NOTICE! The registers r8 and r9 are used as parameters carrying - ;; information from the decompressor (if the kernel was compressed). + ;; information from the decompressor (if the kernel was compressed). ;; They should not be used in the code below until read. - - nop + + nop di ;; First setup the kseg_c mapping from where the kernel is linked @@ -234,19 +56,19 @@ #ifdef CONFIG_CRIS_LOW_MAP ; kseg mappings, temporary map of 0xc0->0x40 - move.d IO_FIELD (R_MMU_KBASE_HI, base_c, 4) \ + move.d IO_FIELD (R_MMU_KBASE_HI, base_c, 4) \ | IO_FIELD (R_MMU_KBASE_HI, base_b, 0xb) \ | IO_FIELD (R_MMU_KBASE_HI, base_9, 9) \ | IO_FIELD (R_MMU_KBASE_HI, base_8, 8), $r0 move.d $r0, [R_MMU_KBASE_HI] - ; temporary map of 0x40->0x40 and 0x60->0x40 - move.d IO_FIELD (R_MMU_KBASE_LO, base_6, 4) \ + ; temporary map of 0x40->0x40 and 0x60->0x40 + move.d IO_FIELD (R_MMU_KBASE_LO, base_6, 4) \ | IO_FIELD (R_MMU_KBASE_LO, base_4, 4), $r0 move.d $r0, [R_MMU_KBASE_LO] ; mmu enable, segs e,c,b,a,6,5,4,0 segment mapped - move.d IO_STATE (R_MMU_CONFIG, mmu_enable, enable) \ + move.d IO_STATE (R_MMU_CONFIG, mmu_enable, enable) \ | IO_STATE (R_MMU_CONFIG, inv_excp, enable) \ | IO_STATE (R_MMU_CONFIG, acc_excp, enable) \ | IO_STATE (R_MMU_CONFIG, we_excp, enable) \ @@ -269,17 +91,17 @@ move.d $r0, [R_MMU_CONFIG] #else ; kseg mappings - move.d IO_FIELD (R_MMU_KBASE_HI, base_e, 8) \ + move.d IO_FIELD (R_MMU_KBASE_HI, base_e, 8) \ | IO_FIELD (R_MMU_KBASE_HI, base_c, 4) \ | IO_FIELD (R_MMU_KBASE_HI, base_b, 0xb), $r0 move.d $r0, [R_MMU_KBASE_HI] - ; temporary map of 0x40->0x40 and 0x00->0x00 + ; temporary map of 0x40->0x40 and 0x00->0x00 move.d IO_FIELD (R_MMU_KBASE_LO, base_4, 4), $r0 move.d $r0, [R_MMU_KBASE_LO] ; mmu enable, segs f,e,c,b,4,0 segment mapped - move.d IO_STATE (R_MMU_CONFIG, mmu_enable, enable) \ + move.d IO_STATE (R_MMU_CONFIG, mmu_enable, enable) \ | IO_STATE (R_MMU_CONFIG, inv_excp, enable) \ | IO_STATE (R_MMU_CONFIG, acc_excp, enable) \ | IO_STATE (R_MMU_CONFIG, we_excp, enable) \ @@ -317,12 +139,12 @@ ;; ;; In both cases, we start in un-cached mode, and need to jump into a ;; cached PC after we're done fiddling around with the segments. - ;; + ;; ;; arch/etrax100/etrax100.ld sets some symbols that define the start ;; and end of each segment. ;; Check if we start from DRAM or FLASH by testing PC - + move.d $pc,$r0 and.d 0x7fffffff,$r0 ; get rid of the non-cache bit cmp.d 0x10000,$r0 ; arbitrary... just something above this code @@ -339,30 +161,28 @@ _inflash0: ;; after init. .section ".init.text", "ax" _inflash: -#ifdef CONFIG_ETRAX_ETHERNET +#ifdef CONFIG_ETRAX_ETHERNET ;; Start MII clock to make sure it is running when tranceiver is reset move.d START_ETHERNET_CLOCK, $r0 move.d $r0, [R_NETWORK_GEN_CONFIG] #endif ;; Set up waitstates etc according to kernel configuration. -#ifndef CONFIG_SVINTO_SIM move.d CONFIG_ETRAX_DEF_R_WAITSTATES, $r0 move.d $r0, [R_WAITSTATES] move.d CONFIG_ETRAX_DEF_R_BUS_CONFIG, $r0 move.d $r0, [R_BUS_CONFIG] -#endif ;; We need to initialze DRAM registers before we start using the DRAM cmp.d RAM_INIT_MAGIC, $r8 ; Already initialized? beq _dram_init_finished nop - + #include "../lib/dram_init.S" -_dram_init_finished: +_dram_init_finished: ;; Copy text+data to DRAM ;; This is fragile - the calculation of r4 as the image size depends ;; on that the labels below actually are the first and last positions @@ -374,7 +194,7 @@ _dram_init_finished: ;; between the physical start of the flash and the flash-image start, ;; and when run with compression, the kernel is actually unpacked to ;; DRAM and we never get here in the first place :)) - + moveq 0, $r0 ; source move.d text_start, $r1 ; destination move.d __vmlinux_end, $r2 ; end destination @@ -405,10 +225,10 @@ _dram_init_finished: add.d 0xf0000000, $r4 ; add flash start in virtual memory (cached) #endif move.d $r4, [romfs_start] -1: +1: moveq 1, $r0 move.d $r0, [romfs_in_flash] - + jump _start_it ; enter code, cached this time _inram: @@ -417,7 +237,7 @@ _inram: moveq 0, $r0 move.d $r0, [romfs_length] ; default if there is no cramfs - + ;; The kernel could have been unpacked to DRAM by the loader, but ;; the cramfs image could still be in the Flash directly after the ;; compressed kernel image. The loader passes the address of the @@ -427,7 +247,7 @@ _inram: ;; (Notice that if this is not booted from the loader, r9 will be ;; garbage but we do sanity checks on it, the chance that it points ;; to a cramfs magic is small.. ) - + cmp.d 0x0ffffff8, $r9 bhs _no_romfs_in_flash ; r9 points outside the flash area nop @@ -450,20 +270,20 @@ _inram: jump _start_it ; enter code, cached this time _no_romfs_in_flash: - + ;; Check if there is a cramfs (magic value). ;; Notice that we check for cramfs magic value - which is ;; the "rom fs" we'll possibly use in 2.4 if not JFFS (which does ;; not need this mechanism anyway) - move.d __vmlinux_end, $r0; the image will be after the vmlinux end address + move.d __init_end, $r0; the image will be after the end of init move.d [$r0], $r1 ; cramfs assumes same endian on host/target cmp.d CRAMFS_MAGIC, $r1; magic value in cramfs superblock bne 2f nop - ;; Ok. What is its size ? - + ;; Ok. What is its size ? + move.d [$r0 + 4], $r2 ; cramfs_super.size (again, no need to swapwb) ;; We want to copy it to the end of the BSS @@ -479,7 +299,7 @@ _no_romfs_in_flash: add.d $r2, $r0 add.d $r2, $r1 - + ;; Go ahead. Make my loop. lsrq 1, $r2 ; size is in bytes, we copy words @@ -490,14 +310,14 @@ _no_romfs_in_flash: bne 1b nop -2: +2: ;; Dont worry that the BSS is tainted. It will be cleared later. moveq 0, $r0 move.d $r0, [romfs_in_flash] jump _start_it ; better skip the additional cramfs check below - + _start_it: ;; Check if kernel command line is supplied @@ -524,7 +344,7 @@ no_command_line: move.d ibr_start,$r0 ; this symbol is set by the linker script move $r0,$ibr move.d $r0,[etrax_irv] ; set the interrupt base register and pointer - + ;; Clear BSS region, from _bss_start to _end move.d __bss_start, $r0 @@ -533,7 +353,7 @@ no_command_line: cmp.d $r1, $r0 blo 1b nop - + #ifdef CONFIG_BLK_DEV_ETRAXIDE ;; disable ATA before enabling it in genconfig below moveq 0,$r0 @@ -556,7 +376,7 @@ no_command_line: #ifdef CONFIG_JULIETTE ;; configure external DMA channel 0 before enabling it in genconfig - + moveq 0,$r0 move.d $r0,[R_EXT_DMA_0_ADDR] ; cnt enable, word size, output, stop, size 0 @@ -571,7 +391,7 @@ no_command_line: move.d $r0,[R_EXT_DMA_0_CMD] ;; reset dma4 and wait for completion - + moveq IO_STATE (R_DMA_CH4_CMD, cmd, reset),$r0 move.b $r0,[R_DMA_CH4_CMD] 1: move.b [R_DMA_CH4_CMD],$r0 @@ -581,7 +401,7 @@ no_command_line: nop ;; reset dma5 and wait for completion - + moveq IO_STATE (R_DMA_CH5_CMD, cmd, reset),$r0 move.b $r0,[R_DMA_CH5_CMD] 1: move.b [R_DMA_CH5_CMD],$r0 @@ -589,17 +409,23 @@ no_command_line: cmp.b IO_STATE (R_DMA_CH5_CMD, cmd, reset),$r0 beq 1b nop -#endif - +#endif + ;; Etrax product HW genconfig setup moveq 0,$r0 + ;; Select or disable serial port 2 +#ifdef CONFIG_ETRAX_SERIAL_PORT2 + or.d IO_STATE (R_GEN_CONFIG, ser2, select),$r0 +#else + or.d IO_STATE (R_GEN_CONFIG, ser2, disable),$r0 +#endif + ;; Init interfaces (disable them). or.d IO_STATE (R_GEN_CONFIG, scsi0, disable) \ | IO_STATE (R_GEN_CONFIG, ata, disable) \ | IO_STATE (R_GEN_CONFIG, par0, disable) \ - | IO_STATE (R_GEN_CONFIG, ser2, disable) \ | IO_STATE (R_GEN_CONFIG, mio, disable) \ | IO_STATE (R_GEN_CONFIG, scsi1, disable) \ | IO_STATE (R_GEN_CONFIG, scsi0w, disable) \ @@ -638,7 +464,6 @@ no_command_line: move.d $r0,[genconfig_shadow] ; init a shadow register of R_GEN_CONFIG -#ifndef CONFIG_SVINTO_SIM move.d $r0,[R_GEN_CONFIG] #if 0 @@ -656,7 +481,7 @@ no_command_line: beq 1b nop #endif - + moveq IO_STATE (R_DMA_CH8_CMD, cmd, reset),$r0 move.b $r0,[R_DMA_CH8_CMD] ; reset (ser1 dma out) move.b $r0,[R_DMA_CH9_CMD] ; reset (ser1 dma in) @@ -673,7 +498,7 @@ no_command_line: ;; setup port PA and PB default initial directions and data ;; including their shadow registers - + move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR,$r0 #if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_PA7) or.b IO_STATE (R_PORT_PA_DIR, dir7, output),$r0 @@ -690,7 +515,7 @@ no_command_line: #endif move.b $r0,[port_pa_data_shadow] move.b $r0,[R_PORT_PA_DATA] - + move.b CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG,$r0 move.b $r0,[port_pb_config_shadow] move.b $r0,[R_PORT_PB_CONFIG] @@ -732,13 +557,13 @@ no_command_line: #endif move.d $r0,[port_g_data_shadow] move.d $r0,[R_PORT_G_DATA] - + ;; setup the serial port 0 at 115200 baud for debug purposes - + moveq IO_STATE (R_SERIAL0_XOFF, tx_stop, enable) \ | IO_STATE (R_SERIAL0_XOFF, auto_xoff, disable) \ | IO_FIELD (R_SERIAL0_XOFF, xoff_char, 0),$r0 - move.d $r0,[R_SERIAL0_XOFF] + move.d $r0,[R_SERIAL0_XOFF] ; 115.2kbaud for both transmit and receive move.b IO_STATE (R_SERIAL0_BAUD, tr_baud, c115k2Hz) \ @@ -754,8 +579,8 @@ no_command_line: | IO_STATE (R_SERIAL0_REC_CTRL, rec_par, even) \ | IO_STATE (R_SERIAL0_REC_CTRL, rec_par_en, disable) \ | IO_STATE (R_SERIAL0_REC_CTRL, rec_bitnr, rec_8bit),$r0 - move.b $r0,[R_SERIAL0_REC_CTRL] - + move.b $r0,[R_SERIAL0_REC_CTRL] + ; Set up and enable the serial0 transmitter. move.b IO_FIELD (R_SERIAL0_TR_CTRL, txd, 0) \ | IO_STATE (R_SERIAL0_TR_CTRL, tr_enable, enable) \ @@ -768,11 +593,11 @@ no_command_line: move.b $r0,[R_SERIAL0_TR_CTRL] ;; setup the serial port 1 at 115200 baud for debug purposes - + moveq IO_STATE (R_SERIAL1_XOFF, tx_stop, enable) \ | IO_STATE (R_SERIAL1_XOFF, auto_xoff, disable) \ | IO_FIELD (R_SERIAL1_XOFF, xoff_char, 0),$r0 - move.d $r0,[R_SERIAL1_XOFF] + move.d $r0,[R_SERIAL1_XOFF] ; 115.2kbaud for both transmit and receive move.b IO_STATE (R_SERIAL1_BAUD, tr_baud, c115k2Hz) \ @@ -788,8 +613,8 @@ no_command_line: | IO_STATE (R_SERIAL1_REC_CTRL, rec_par, even) \ | IO_STATE (R_SERIAL1_REC_CTRL, rec_par_en, disable) \ | IO_STATE (R_SERIAL1_REC_CTRL, rec_bitnr, rec_8bit),$r0 - move.b $r0,[R_SERIAL1_REC_CTRL] - + move.b $r0,[R_SERIAL1_REC_CTRL] + ; Set up and enable the serial1 transmitter. move.b IO_FIELD (R_SERIAL1_TR_CTRL, txd, 0) \ | IO_STATE (R_SERIAL1_TR_CTRL, tr_enable, enable) \ @@ -801,14 +626,49 @@ no_command_line: | IO_STATE (R_SERIAL1_TR_CTRL, tr_bitnr, tr_8bit),$r0 move.b $r0,[R_SERIAL1_TR_CTRL] - -#ifdef CONFIG_ETRAX_SERIAL_PORT3 +#ifdef CONFIG_ETRAX_SERIAL_PORT2 + ;; setup the serial port 2 at 115200 baud for debug purposes + + moveq IO_STATE (R_SERIAL2_XOFF, tx_stop, enable) \ + | IO_STATE (R_SERIAL2_XOFF, auto_xoff, disable) \ + | IO_FIELD (R_SERIAL2_XOFF, xoff_char, 0),$r0 + move.d $r0,[R_SERIAL2_XOFF] + + ; 115.2kbaud for both transmit and receive + move.b IO_STATE (R_SERIAL2_BAUD, tr_baud, c115k2Hz) \ + | IO_STATE (R_SERIAL2_BAUD, rec_baud, c115k2Hz),$r0 + move.b $r0,[R_SERIAL2_BAUD] + + ; Set up and enable the serial2 receiver. + move.b IO_STATE (R_SERIAL2_REC_CTRL, dma_err, stop) \ + | IO_STATE (R_SERIAL2_REC_CTRL, rec_enable, enable) \ + | IO_STATE (R_SERIAL2_REC_CTRL, rts_, active) \ + | IO_STATE (R_SERIAL2_REC_CTRL, sampling, middle) \ + | IO_STATE (R_SERIAL2_REC_CTRL, rec_stick_par, normal) \ + | IO_STATE (R_SERIAL2_REC_CTRL, rec_par, even) \ + | IO_STATE (R_SERIAL2_REC_CTRL, rec_par_en, disable) \ + | IO_STATE (R_SERIAL2_REC_CTRL, rec_bitnr, rec_8bit),$r0 + move.b $r0,[R_SERIAL2_REC_CTRL] + + ; Set up and enable the serial2 transmitter. + move.b IO_FIELD (R_SERIAL2_TR_CTRL, txd, 0) \ + | IO_STATE (R_SERIAL2_TR_CTRL, tr_enable, enable) \ + | IO_STATE (R_SERIAL2_TR_CTRL, auto_cts, disabled) \ + | IO_STATE (R_SERIAL2_TR_CTRL, stop_bits, one_bit) \ + | IO_STATE (R_SERIAL2_TR_CTRL, tr_stick_par, normal) \ + | IO_STATE (R_SERIAL2_TR_CTRL, tr_par, even) \ + | IO_STATE (R_SERIAL2_TR_CTRL, tr_par_en, disable) \ + | IO_STATE (R_SERIAL2_TR_CTRL, tr_bitnr, tr_8bit),$r0 + move.b $r0,[R_SERIAL2_TR_CTRL] +#endif + +#ifdef CONFIG_ETRAX_SERIAL_PORT3 ;; setup the serial port 3 at 115200 baud for debug purposes - + moveq IO_STATE (R_SERIAL3_XOFF, tx_stop, enable) \ | IO_STATE (R_SERIAL3_XOFF, auto_xoff, disable) \ | IO_FIELD (R_SERIAL3_XOFF, xoff_char, 0),$r0 - move.d $r0,[R_SERIAL3_XOFF] + move.d $r0,[R_SERIAL3_XOFF] ; 115.2kbaud for both transmit and receive move.b IO_STATE (R_SERIAL3_BAUD, tr_baud, c115k2Hz) \ @@ -824,8 +684,8 @@ no_command_line: | IO_STATE (R_SERIAL3_REC_CTRL, rec_par, even) \ | IO_STATE (R_SERIAL3_REC_CTRL, rec_par_en, disable) \ | IO_STATE (R_SERIAL3_REC_CTRL, rec_bitnr, rec_8bit),$r0 - move.b $r0,[R_SERIAL3_REC_CTRL] - + move.b $r0,[R_SERIAL3_REC_CTRL] + ; Set up and enable the serial3 transmitter. move.b IO_FIELD (R_SERIAL3_TR_CTRL, txd, 0) \ | IO_STATE (R_SERIAL3_TR_CTRL, tr_enable, enable) \ @@ -837,13 +697,11 @@ no_command_line: | IO_STATE (R_SERIAL3_TR_CTRL, tr_bitnr, tr_8bit),$r0 move.b $r0,[R_SERIAL3_TR_CTRL] #endif - -#endif /* CONFIG_SVINTO_SIM */ jump start_kernel ; jump into the C-function start_kernel in init/main.c - + .data -etrax_irv: +etrax_irv: .dword 0 romfs_start: .dword 0 @@ -851,13 +709,13 @@ romfs_length: .dword 0 romfs_in_flash: .dword 0 - + ;; put some special pages at the beginning of the kernel aligned ;; to page boundaries - the kernel cannot start until after this #ifdef CONFIG_CRIS_LOW_MAP swapper_pg_dir = 0x60002000 -#else +#else swapper_pg_dir = 0xc0002000 #endif |