diff options
Diffstat (limited to 'arch/blackfin')
162 files changed, 5847 insertions, 4650 deletions
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index b6f3ad5441c..f81e7b989ff 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -1,7 +1,3 @@ -config SYMBOL_PREFIX - string - default "_" - config MMU def_bool n @@ -24,7 +20,6 @@ config BLACKFIN select HAVE_FUNCTION_TRACER select HAVE_FUNCTION_TRACE_MCOUNT_TEST select HAVE_IDE - select HAVE_IRQ_WORK select HAVE_KERNEL_GZIP if RAMKERNEL select HAVE_KERNEL_BZIP2 if RAMKERNEL select HAVE_KERNEL_LZMA if RAMKERNEL @@ -32,19 +27,20 @@ config BLACKFIN select HAVE_OPROFILE select HAVE_PERF_EVENTS select ARCH_HAVE_CUSTOM_GPIO_H - select ARCH_WANT_OPTIONAL_GPIOLIB + select ARCH_REQUIRE_GPIOLIB select HAVE_UID16 + select HAVE_UNDERSCORE_SYMBOL_PREFIX + select VIRT_TO_BUS select ARCH_WANT_IPC_PARSE_VERSION - select HAVE_GENERIC_HARDIRQS select GENERIC_ATOMIC64 select GENERIC_IRQ_PROBE - select IRQ_PER_CPU if SMP - select USE_GENERIC_SMP_HELPERS if SMP + select GENERIC_IRQ_SHOW select HAVE_NMI_WATCHDOG if NMI_WATCHDOG select GENERIC_SMP_IDLE_THREAD select ARCH_USES_GETTIMEOFFSET if !GENERIC_CLOCKEVENTS select HAVE_MOD_ARCH_SPECIFIC select MODULES_USE_ELF_RELA + select HAVE_DEBUG_STACKOVERFLOW config GENERIC_CSUM def_bool y @@ -56,9 +52,6 @@ config GENERIC_BUG config ZONE_DMA def_bool y -config GENERIC_GPIO - def_bool y - config FORCE_MAX_ZONEORDER int default "14" @@ -260,7 +253,7 @@ config NR_CPUS config HOTPLUG_CPU bool "Support for hot-pluggable CPUs" - depends on SMP && HOTPLUG + depends on SMP default y config BF_REV_MIN @@ -289,7 +282,7 @@ config BF_REV_0_0 config BF_REV_0_1 bool "0.1" - depends on (BF51x || BF52x || (BF54x && !BF54xM)) + depends on (BF51x || BF52x || (BF54x && !BF54xM) || BF60x) config BF_REV_0_2 bool "0.2" @@ -324,6 +317,14 @@ config BF53x depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537) default y +config GPIO_ADI + def_bool y + depends on (BF51x || BF52x || BF53x || BF538 || BF539 || BF561) + +config PINCTRL + def_bool y + depends on BF54x || BF60x + config MEM_MT48LC64M4A2FB_7E bool depends on (BFIN533_STAMP) @@ -562,8 +563,7 @@ choice accurate - This option is therefore marked experimental. config BFIN_KERNEL_CLOCK_MEMINIT_CALC - bool "Calculate Timings (EXPERIMENTAL)" - depends on EXPERIMENTAL + bool "Calculate Timings" config BFIN_KERNEL_CLOCK_MEMINIT_SPEC bool "Provide accurate Timings based on target SCLK" @@ -868,14 +868,6 @@ config SYS_BFIN_SPINLOCK_L1 If enabled, sys_bfin_spinlock function is linked into L1 instruction memory. (less latency) -config IP_CHECKSUM_L1 - bool "Locate IP Checksum function in L1 Memory" - default n - depends on !SMP - help - If enabled, the IP Checksum function is linked - into L1 instruction memory. (less latency) - config CACHELINE_ALIGNED_L1 bool "Locate cacheline_aligned data to L1 Data Memory" default y if !BF54x @@ -1120,7 +1112,7 @@ endchoice comment "Memory Protection Unit" config MPU - bool "Enable the memory protection unit (EXPERIMENTAL)" + bool "Enable the memory protection unit" default n help Use the processor's MPU to protect applications from accessing @@ -1437,12 +1429,10 @@ source "drivers/cpufreq/Kconfig" config BFIN_CPU_FREQ bool depends on CPU_FREQ - select CPU_FREQ_TABLE default y config CPU_VOLTAGE bool "CPU Voltage scaling" - depends on EXPERIMENTAL depends on CPU_FREQ default n help diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug index 79594694ee9..f3337ee0362 100644 --- a/arch/blackfin/Kconfig.debug +++ b/arch/blackfin/Kconfig.debug @@ -2,13 +2,6 @@ menu "Kernel hacking" source "lib/Kconfig.debug" -config DEBUG_STACKOVERFLOW - bool "Check for stack overflows" - depends on DEBUG_KERNEL - help - This option will cause messages to be printed if free stack space - drops below a certain limit. - config DEBUG_VERBOSE bool "Verbose fault messages" default y diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile index 66cf00095b8..1fce08632ad 100644 --- a/arch/blackfin/Makefile +++ b/arch/blackfin/Makefile @@ -141,11 +141,11 @@ archclean: INSTALL_PATH ?= /tftpboot boot := arch/$(ARCH)/boot -BOOT_TARGETS = vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma vmImage.lzo vmImage.xip +BOOT_TARGETS = uImage uImage.bin uImage.bz2 uImage.gz uImage.lzma uImage.lzo uImage.xip PHONY += $(BOOT_TARGETS) install -KBUILD_IMAGE := $(boot)/vmImage +KBUILD_IMAGE := $(boot)/uImage -all: vmImage +all: uImage $(BOOT_TARGETS): vmlinux $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ diff --git a/arch/blackfin/boot/.gitignore b/arch/blackfin/boot/.gitignore index 229e5080867..1287a5487e7 100644 --- a/arch/blackfin/boot/.gitignore +++ b/arch/blackfin/boot/.gitignore @@ -1,2 +1,3 @@ vmImage* vmlinux* +uImage* diff --git a/arch/blackfin/boot/Makefile b/arch/blackfin/boot/Makefile index f7d27d50d02..3efaa094fb9 100644 --- a/arch/blackfin/boot/Makefile +++ b/arch/blackfin/boot/Makefile @@ -6,7 +6,7 @@ # for more details. # -targets := vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma vmImage.lzo vmImage.xip +targets := uImage uImage.bin uImage.bz2 uImage.gz uImage.lzma uImage.lzo uImage.xip extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.lzo vmlinux.bin.xip ifeq ($(CONFIG_RAMKERNEL),y) @@ -39,22 +39,22 @@ quiet_cmd_mk_bin_xip = BIN $@ $(obj)/vmlinux.bin.xip: $(obj)/vmlinux.bin FORCE $(call if_changed,mk_bin_xip) -$(obj)/vmImage.bin: $(obj)/vmlinux.bin +$(obj)/uImage.bin: $(obj)/vmlinux.bin $(call if_changed,uimage,none) -$(obj)/vmImage.bz2: $(obj)/vmlinux.bin.bz2 +$(obj)/uImage.bz2: $(obj)/vmlinux.bin.bz2 $(call if_changed,uimage,bzip2) -$(obj)/vmImage.gz: $(obj)/vmlinux.bin.gz +$(obj)/uImage.gz: $(obj)/vmlinux.bin.gz $(call if_changed,uimage,gzip) -$(obj)/vmImage.lzma: $(obj)/vmlinux.bin.lzma +$(obj)/uImage.lzma: $(obj)/vmlinux.bin.lzma $(call if_changed,uimage,lzma) -$(obj)/vmImage.lzo: $(obj)/vmlinux.bin.lzo +$(obj)/uImage.lzo: $(obj)/vmlinux.bin.lzo $(call if_changed,uimage,lzo) -$(obj)/vmImage.xip: $(obj)/vmlinux.bin.xip +$(obj)/uImage.xip: $(obj)/vmlinux.bin.xip $(call if_changed,uimage,none) suffix-y := bin @@ -64,7 +64,7 @@ suffix-$(CONFIG_KERNEL_LZMA) := lzma suffix-$(CONFIG_KERNEL_LZO) := lzo suffix-$(CONFIG_ROMKERNEL) := xip -$(obj)/vmImage: $(obj)/vmImage.$(suffix-y) +$(obj)/uImage: $(obj)/uImage.$(suffix-y) @ln -sf $(notdir $<) $@ install: diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig index 2f2c6acf210..e66ba31ef84 100644 --- a/arch/blackfin/configs/BF526-EZBRD_defconfig +++ b/arch/blackfin/configs/BF526-EZBRD_defconfig @@ -53,7 +53,6 @@ CONFIG_IP_PNP=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y @@ -63,6 +62,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=m +CONFIG_MTD_SPI_NOR=y CONFIG_BLK_DEV_RAM=y CONFIG_SCSI=y # CONFIG_SCSI_PROC_FS is not set @@ -123,7 +123,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OTG_BLACKLIST_HUB=y CONFIG_USB_MON=y diff --git a/arch/blackfin/configs/BF527-EZKIT-V2_defconfig b/arch/blackfin/configs/BF527-EZKIT-V2_defconfig index 91535c38e7f..0207c588c19 100644 --- a/arch/blackfin/configs/BF527-EZKIT-V2_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT-V2_defconfig @@ -58,7 +58,6 @@ CONFIG_BFIN_SIR0=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_CHAR=m CONFIG_MTD_BLOCK=y CONFIG_MTD_JEDECPROBE=m CONFIG_MTD_RAM=y @@ -66,6 +65,7 @@ CONFIG_MTD_ROM=m CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=m +CONFIG_MTD_SPI_NOR=y CONFIG_BLK_DEV_RAM=y CONFIG_SCSI=y # CONFIG_SCSI_PROC_FS is not set @@ -147,7 +147,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OTG_BLACKLIST_HUB=y CONFIG_USB_MON=y diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig index 90b17532364..99c131ba7d9 100644 --- a/arch/blackfin/configs/BF527-EZKIT_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT_defconfig @@ -57,7 +57,6 @@ CONFIG_BFIN_SIR0=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_CHAR=m CONFIG_MTD_BLOCK=y CONFIG_MTD_JEDECPROBE=m CONFIG_MTD_RAM=y @@ -65,6 +64,7 @@ CONFIG_MTD_ROM=m CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=m +CONFIG_MTD_SPI_NOR=y CONFIG_BLK_DEV_RAM=y CONFIG_SCSI=y # CONFIG_SCSI_PROC_FS is not set @@ -141,11 +141,11 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OTG_BLACKLIST_HUB=y CONFIG_USB_MON=y CONFIG_USB_MUSB_HDRC=y +CONFIG_MUSB_PIO_ONLY=y CONFIG_USB_MUSB_BLACKFIN=y CONFIG_MUSB_PIO_ONLY=y CONFIG_USB_STORAGE=y diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig index 972aa6263ad..be03be6ba54 100644 --- a/arch/blackfin/configs/BF538-EZKIT_defconfig +++ b/arch/blackfin/configs/BF538-EZKIT_defconfig @@ -59,7 +59,6 @@ CONFIG_BFIN_SIR=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=m CONFIG_MTD_BLOCK=y diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig index e716fdfd2cf..38cb17d218d 100644 --- a/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -64,7 +64,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_FW_LOADER=m CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y @@ -75,6 +74,7 @@ CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_BF5XX=y # CONFIG_MTD_NAND_BF5XX_HWECC is not set +CONFIG_MTD_SPI_NOR=y CONFIG_BLK_DEV_RAM=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y @@ -159,7 +159,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OTG_BLACKLIST_HUB=y CONFIG_USB_MON=y diff --git a/arch/blackfin/configs/BF561-ACVILON_defconfig b/arch/blackfin/configs/BF561-ACVILON_defconfig index 91988370b75..802f9c42162 100644 --- a/arch/blackfin/configs/BF561-ACVILON_defconfig +++ b/arch/blackfin/configs/BF561-ACVILON_defconfig @@ -49,7 +49,6 @@ CONFIG_SYN_COOKIES=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y diff --git a/arch/blackfin/configs/BF609-EZKIT_defconfig b/arch/blackfin/configs/BF609-EZKIT_defconfig index 13eb73231a9..fcec5ce7139 100644 --- a/arch/blackfin/configs/BF609-EZKIT_defconfig +++ b/arch/blackfin/configs/BF609-EZKIT_defconfig @@ -57,7 +57,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_FW_LOADER=m CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y @@ -65,6 +64,7 @@ CONFIG_MTD_CFI_STAA=y CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_M25P80=y +CONFIG_MTD_SPI_NOR=y CONFIG_MTD_UBI=m CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y @@ -102,7 +102,7 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_BLACKFIN_TWI=y CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 CONFIG_SPI=y -CONFIG_SPI_BFIN6XX=y +CONFIG_SPI_ADI_V3=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig index 7b982d0502a..f4a9200e1ab 100644 --- a/arch/blackfin/configs/BlackStamp_defconfig +++ b/arch/blackfin/configs/BlackStamp_defconfig @@ -44,9 +44,7 @@ CONFIG_IP_PNP=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=m CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=m CONFIG_MTD_CFI_AMDSTD=m @@ -54,7 +52,7 @@ CONFIG_MTD_RAM=y CONFIG_MTD_ROM=m CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_M25P80=y -# CONFIG_M25PXX_USE_FAST_READ is not set +CONFIG_MTD_SPI_NOR=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig index c280a50e794..05108b85ab1 100644 --- a/arch/blackfin/configs/CM-BF527_defconfig +++ b/arch/blackfin/configs/CM-BF527_defconfig @@ -95,7 +95,6 @@ CONFIG_WATCHDOG=y CONFIG_BFIN_WDT=y CONFIG_USB=m CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OTG_BLACKLIST_HUB=y CONFIG_USB_MON=m @@ -106,7 +105,7 @@ CONFIG_MUSB_PIO_ONLY=y CONFIG_USB_STORAGE=m CONFIG_USB_GADGET=m CONFIG_USB_ETH=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_G_PRINTER=m CONFIG_RTC_CLASS=y diff --git a/arch/blackfin/configs/CM-BF533_defconfig b/arch/blackfin/configs/CM-BF533_defconfig index c940a1e3ab3..5e0db82b679 100644 --- a/arch/blackfin/configs/CM-BF533_defconfig +++ b/arch/blackfin/configs/CM-BF533_defconfig @@ -36,7 +36,6 @@ CONFIG_UNIX=y # CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig index 349922be01f..9ff79df6825 100644 --- a/arch/blackfin/configs/CM-BF548_defconfig +++ b/arch/blackfin/configs/CM-BF548_defconfig @@ -53,7 +53,6 @@ CONFIG_INET_XFRM_MODE_BEET=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -95,7 +94,6 @@ CONFIG_WATCHDOG=y CONFIG_BFIN_WDT=y # CONFIG_HID_SUPPORT is not set CONFIG_USB=m -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=m CONFIG_USB_MUSB_HDRC=m @@ -107,7 +105,7 @@ CONFIG_USB_ZERO=m CONFIG_USB_ETH=m # CONFIG_USB_ETH_RNDIS is not set CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_G_PRINTER=m CONFIG_MMC=m diff --git a/arch/blackfin/configs/CM-BF561_defconfig b/arch/blackfin/configs/CM-BF561_defconfig index 0456deaa2d6..d6dd98e6714 100644 --- a/arch/blackfin/configs/CM-BF561_defconfig +++ b/arch/blackfin/configs/CM-BF561_defconfig @@ -51,7 +51,6 @@ CONFIG_INET=y # CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -83,7 +82,7 @@ CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y CONFIG_USB_GADGET=m CONFIG_USB_ETH=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_G_PRINTER=m CONFIG_MMC=y diff --git a/arch/blackfin/configs/DNP5370_defconfig b/arch/blackfin/configs/DNP5370_defconfig index 89162d0fff9..2b58cb22128 100644 --- a/arch/blackfin/configs/DNP5370_defconfig +++ b/arch/blackfin/configs/DNP5370_defconfig @@ -36,7 +36,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_DEBUG=y CONFIG_MTD_DEBUG_VERBOSE=1 -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_NFTL=y diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig index a26436bf50f..0ff97d8d047 100644 --- a/arch/blackfin/configs/H8606_defconfig +++ b/arch/blackfin/configs/H8606_defconfig @@ -36,14 +36,12 @@ CONFIG_IRTTY_SIR=m # CONFIG_WIRELESS is not set # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_RAM=y CONFIG_MTD_ROM=y CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_M25P80=y -# CONFIG_M25PXX_USE_FAST_READ is not set +CONFIG_MTD_SPI_NOR=y CONFIG_BLK_DEV_RAM=y CONFIG_MISC_DEVICES=y CONFIG_EEPROM_AT25=y diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig index 647991514ac..5adf0da5849 100644 --- a/arch/blackfin/configs/IP0X_defconfig +++ b/arch/blackfin/configs/IP0X_defconfig @@ -43,7 +43,6 @@ CONFIG_IP_NF_TARGET_REJECT=y CONFIG_IP_NF_MANGLE=y # CONFIG_WIRELESS is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y @@ -74,7 +73,6 @@ CONFIG_SPI_BFIN5XX=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_OTG_WHITELIST=y CONFIG_USB_MON=y CONFIG_USB_ISP1362_HCD=y diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig index 8fd9b446d65..a6a7298962e 100644 --- a/arch/blackfin/configs/PNAV-10_defconfig +++ b/arch/blackfin/configs/PNAV-10_defconfig @@ -46,7 +46,6 @@ CONFIG_IP_PNP=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CHAR=m CONFIG_MTD_BLOCK=y CONFIG_MTD_RAM=y diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig index 0520c160230..bc216646fe1 100644 --- a/arch/blackfin/configs/SRV1_defconfig +++ b/arch/blackfin/configs/SRV1_defconfig @@ -38,7 +38,6 @@ CONFIG_IRTTY_SIR=m # CONFIG_WIRELESS is not set # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CHAR=m CONFIG_MTD_BLOCK=y CONFIG_MTD_JEDECPROBE=m diff --git a/arch/blackfin/configs/TCM-BF518_defconfig b/arch/blackfin/configs/TCM-BF518_defconfig index e4ed865b885..ea88158ab43 100644 --- a/arch/blackfin/configs/TCM-BF518_defconfig +++ b/arch/blackfin/configs/TCM-BF518_defconfig @@ -54,7 +54,6 @@ CONFIG_IP_PNP=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y diff --git a/arch/blackfin/include/asm/Kbuild b/arch/blackfin/include/asm/Kbuild index 5a0625aad6a..0d93b9a79ca 100644 --- a/arch/blackfin/include/asm/Kbuild +++ b/arch/blackfin/include/asm/Kbuild @@ -1,4 +1,3 @@ -include include/asm-generic/Kbuild.asm generic-y += auxvec.h generic-y += bitsperlong.h @@ -11,20 +10,24 @@ generic-y += emergency-restart.h generic-y += errno.h generic-y += fb.h generic-y += futex.h +generic-y += hash.h generic-y += hw_irq.h generic-y += ioctl.h generic-y += ipcbuf.h generic-y += irq_regs.h generic-y += kdebug.h generic-y += kmap_types.h -generic-y += local64.h +generic-y += kvm_para.h generic-y += local.h +generic-y += local64.h +generic-y += mcs_spinlock.h generic-y += mman.h generic-y += msgbuf.h generic-y += mutex.h generic-y += param.h generic-y += percpu.h generic-y += pgalloc.h +generic-y += preempt.h generic-y += resource.h generic-y += scatterlist.h generic-y += sembuf.h @@ -38,12 +41,9 @@ generic-y += statfs.h generic-y += termbits.h generic-y += termios.h generic-y += topology.h +generic-y += trace_clock.h generic-y += types.h generic-y += ucontext.h generic-y += unaligned.h generic-y += user.h generic-y += xor.h - -header-y += bfin_sport.h -header-y += cachectl.h -header-y += fixed_code.h diff --git a/arch/blackfin/include/asm/atomic.h b/arch/blackfin/include/asm/atomic.h index c8db653c72d..a107a98e997 100644 --- a/arch/blackfin/include/asm/atomic.h +++ b/arch/blackfin/include/asm/atomic.h @@ -11,7 +11,9 @@ #ifdef CONFIG_SMP +#include <asm/barrier.h> #include <linux/linkage.h> +#include <linux/types.h> asmlinkage int __raw_uncached_fetch_asm(const volatile int *ptr); asmlinkage int __raw_atomic_update_asm(volatile int *ptr, int value); diff --git a/arch/blackfin/include/asm/barrier.h b/arch/blackfin/include/asm/barrier.h index ebb189507dd..42000687799 100644 --- a/arch/blackfin/include/asm/barrier.h +++ b/arch/blackfin/include/asm/barrier.h @@ -23,26 +23,13 @@ # define rmb() do { barrier(); smp_check_barrier(); } while (0) # define wmb() do { barrier(); smp_mark_barrier(); } while (0) # define read_barrier_depends() do { barrier(); smp_check_barrier(); } while (0) -#else -# define mb() barrier() -# define rmb() barrier() -# define wmb() barrier() -# define read_barrier_depends() do { } while (0) #endif -#else /* !CONFIG_SMP */ - -#define mb() barrier() -#define rmb() barrier() -#define wmb() barrier() -#define read_barrier_depends() do { } while (0) - #endif /* !CONFIG_SMP */ -#define smp_mb() mb() -#define smp_rmb() rmb() -#define smp_wmb() wmb() -#define set_mb(var, value) do { var = value; mb(); } while (0) -#define smp_read_barrier_depends() read_barrier_depends() +#define smp_mb__before_atomic() barrier() +#define smp_mb__after_atomic() barrier() + +#include <asm-generic/barrier.h> #endif /* _BLACKFIN_BARRIER_H */ diff --git a/arch/blackfin/include/asm/bfin6xx_spi.h b/arch/blackfin/include/asm/bfin6xx_spi.h deleted file mode 100644 index 89370b653dc..00000000000 --- a/arch/blackfin/include/asm/bfin6xx_spi.h +++ /dev/null @@ -1,258 +0,0 @@ -/* - * Analog Devices SPI3 controller driver - * - * Copyright (c) 2011 Analog Devices Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _SPI_CHANNEL_H_ -#define _SPI_CHANNEL_H_ - -#include <linux/types.h> - -/* SPI_CONTROL */ -#define SPI_CTL_EN 0x00000001 /* Enable */ -#define SPI_CTL_MSTR 0x00000002 /* Master/Slave */ -#define SPI_CTL_PSSE 0x00000004 /* controls modf error in master mode */ -#define SPI_CTL_ODM 0x00000008 /* Open Drain Mode */ -#define SPI_CTL_CPHA 0x00000010 /* Clock Phase */ -#define SPI_CTL_CPOL 0x00000020 /* Clock Polarity */ -#define SPI_CTL_ASSEL 0x00000040 /* Slave Select Pin Control */ -#define SPI_CTL_SELST 0x00000080 /* Slave Select Polarity in-between transfers */ -#define SPI_CTL_EMISO 0x00000100 /* Enable MISO */ -#define SPI_CTL_SIZE 0x00000600 /* Word Transfer Size */ -#define SPI_CTL_SIZE08 0x00000000 /* SIZE: 8 bits */ -#define SPI_CTL_SIZE16 0x00000200 /* SIZE: 16 bits */ -#define SPI_CTL_SIZE32 0x00000400 /* SIZE: 32 bits */ -#define SPI_CTL_LSBF 0x00001000 /* LSB First */ -#define SPI_CTL_FCEN 0x00002000 /* Flow-Control Enable */ -#define SPI_CTL_FCCH 0x00004000 /* Flow-Control Channel Selection */ -#define SPI_CTL_FCPL 0x00008000 /* Flow-Control Polarity */ -#define SPI_CTL_FCWM 0x00030000 /* Flow-Control Water-Mark */ -#define SPI_CTL_FIFO0 0x00000000 /* FCWM: TFIFO empty or RFIFO Full */ -#define SPI_CTL_FIFO1 0x00010000 /* FCWM: TFIFO 75% or more empty or RFIFO 75% or more full */ -#define SPI_CTL_FIFO2 0x00020000 /* FCWM: TFIFO 50% or more empty or RFIFO 50% or more full */ -#define SPI_CTL_FMODE 0x00040000 /* Fast-mode Enable */ -#define SPI_CTL_MIOM 0x00300000 /* Multiple I/O Mode */ -#define SPI_CTL_MIO_DIS 0x00000000 /* MIOM: Disable */ -#define SPI_CTL_MIO_DUAL 0x00100000 /* MIOM: Enable DIOM (Dual I/O Mode) */ -#define SPI_CTL_MIO_QUAD 0x00200000 /* MIOM: Enable QUAD (Quad SPI Mode) */ -#define SPI_CTL_SOSI 0x00400000 /* Start on MOSI */ -/* SPI_RX_CONTROL */ -#define SPI_RXCTL_REN 0x00000001 /* Receive Channel Enable */ -#define SPI_RXCTL_RTI 0x00000004 /* Receive Transfer Initiate */ -#define SPI_RXCTL_RWCEN 0x00000008 /* Receive Word Counter Enable */ -#define SPI_RXCTL_RDR 0x00000070 /* Receive Data Request */ -#define SPI_RXCTL_RDR_DIS 0x00000000 /* RDR: Disabled */ -#define SPI_RXCTL_RDR_NE 0x00000010 /* RDR: RFIFO not empty */ -#define SPI_RXCTL_RDR_25 0x00000020 /* RDR: RFIFO 25% full */ -#define SPI_RXCTL_RDR_50 0x00000030 /* RDR: RFIFO 50% full */ -#define SPI_RXCTL_RDR_75 0x00000040 /* RDR: RFIFO 75% full */ -#define SPI_RXCTL_RDR_FULL 0x00000050 /* RDR: RFIFO full */ -#define SPI_RXCTL_RDO 0x00000100 /* Receive Data Over-Run */ -#define SPI_RXCTL_RRWM 0x00003000 /* FIFO Regular Water-Mark */ -#define SPI_RXCTL_RWM_0 0x00000000 /* RRWM: RFIFO Empty */ -#define SPI_RXCTL_RWM_25 0x00001000 /* RRWM: RFIFO 25% full */ -#define SPI_RXCTL_RWM_50 0x00002000 /* RRWM: RFIFO 50% full */ -#define SPI_RXCTL_RWM_75 0x00003000 /* RRWM: RFIFO 75% full */ -#define SPI_RXCTL_RUWM 0x00070000 /* FIFO Urgent Water-Mark */ -#define SPI_RXCTL_UWM_DIS 0x00000000 /* RUWM: Disabled */ -#define SPI_RXCTL_UWM_25 0x00010000 /* RUWM: RFIFO 25% full */ -#define SPI_RXCTL_UWM_50 0x00020000 /* RUWM: RFIFO 50% full */ -#define SPI_RXCTL_UWM_75 0x00030000 /* RUWM: RFIFO 75% full */ -#define SPI_RXCTL_UWM_FULL 0x00040000 /* RUWM: RFIFO full */ -/* SPI_TX_CONTROL */ -#define SPI_TXCTL_TEN 0x00000001 /* Transmit Channel Enable */ -#define SPI_TXCTL_TTI 0x00000004 /* Transmit Transfer Initiate */ -#define SPI_TXCTL_TWCEN 0x00000008 /* Transmit Word Counter Enable */ -#define SPI_TXCTL_TDR 0x00000070 /* Transmit Data Request */ -#define SPI_TXCTL_TDR_DIS 0x00000000 /* TDR: Disabled */ -#define SPI_TXCTL_TDR_NF 0x00000010 /* TDR: TFIFO not full */ -#define SPI_TXCTL_TDR_25 0x00000020 /* TDR: TFIFO 25% empty */ -#define SPI_TXCTL_TDR_50 0x00000030 /* TDR: TFIFO 50% empty */ -#define SPI_TXCTL_TDR_75 0x00000040 /* TDR: TFIFO 75% empty */ -#define SPI_TXCTL_TDR_EMPTY 0x00000050 /* TDR: TFIFO empty */ -#define SPI_TXCTL_TDU 0x00000100 /* Transmit Data Under-Run */ -#define SPI_TXCTL_TRWM 0x00003000 /* FIFO Regular Water-Mark */ -#define SPI_TXCTL_RWM_FULL 0x00000000 /* TRWM: TFIFO full */ -#define SPI_TXCTL_RWM_25 0x00001000 /* TRWM: TFIFO 25% empty */ -#define SPI_TXCTL_RWM_50 0x00002000 /* TRWM: TFIFO 50% empty */ -#define SPI_TXCTL_RWM_75 0x00003000 /* TRWM: TFIFO 75% empty */ -#define SPI_TXCTL_TUWM 0x00070000 /* FIFO Urgent Water-Mark */ -#define SPI_TXCTL_UWM_DIS 0x00000000 /* TUWM: Disabled */ -#define SPI_TXCTL_UWM_25 0x00010000 /* TUWM: TFIFO 25% empty */ -#define SPI_TXCTL_UWM_50 0x00020000 /* TUWM: TFIFO 50% empty */ -#define SPI_TXCTL_UWM_75 0x00030000 /* TUWM: TFIFO 75% empty */ -#define SPI_TXCTL_UWM_EMPTY 0x00040000 /* TUWM: TFIFO empty */ -/* SPI_CLOCK */ -#define SPI_CLK_BAUD 0x0000FFFF /* Baud Rate */ -/* SPI_DELAY */ -#define SPI_DLY_STOP 0x000000FF /* Transfer delay time in multiples of SCK period */ -#define SPI_DLY_LEADX 0x00000100 /* Extended (1 SCK) LEAD Control */ -#define SPI_DLY_LAGX 0x00000200 /* Extended (1 SCK) LAG control */ -/* SPI_SSEL */ -#define SPI_SLVSEL_SSE1 0x00000002 /* SPISSEL1 Enable */ -#define SPI_SLVSEL_SSE2 0x00000004 /* SPISSEL2 Enable */ -#define SPI_SLVSEL_SSE3 0x00000008 /* SPISSEL3 Enable */ -#define SPI_SLVSEL_SSE4 0x00000010 /* SPISSEL4 Enable */ -#define SPI_SLVSEL_SSE5 0x00000020 /* SPISSEL5 Enable */ -#define SPI_SLVSEL_SSE6 0x00000040 /* SPISSEL6 Enable */ -#define SPI_SLVSEL_SSE7 0x00000080 /* SPISSEL7 Enable */ -#define SPI_SLVSEL_SSEL1 0x00000200 /* SPISSEL1 Value */ -#define SPI_SLVSEL_SSEL2 0x00000400 /* SPISSEL2 Value */ -#define SPI_SLVSEL_SSEL3 0x00000800 /* SPISSEL3 Value */ -#define SPI_SLVSEL_SSEL4 0x00001000 /* SPISSEL4 Value */ -#define SPI_SLVSEL_SSEL5 0x00002000 /* SPISSEL5 Value */ -#define SPI_SLVSEL_SSEL6 0x00004000 /* SPISSEL6 Value */ -#define SPI_SLVSEL_SSEL7 0x00008000 /* SPISSEL7 Value */ -/* SPI_RWC */ -#define SPI_RWC_VALUE 0x0000FFFF /* Received Word-Count */ -/* SPI_RWCR */ -#define SPI_RWCR_VALUE 0x0000FFFF /* Received Word-Count Reload */ -/* SPI_TWC */ -#define SPI_TWC_VALUE 0x0000FFFF /* Transmitted Word-Count */ -/* SPI_TWCR */ -#define SPI_TWCR_VALUE 0x0000FFFF /* Transmitted Word-Count Reload */ -/* SPI_IMASK */ -#define SPI_IMSK_RUWM 0x00000002 /* Receive Urgent Water-Mark Interrupt Mask */ -#define SPI_IMSK_TUWM 0x00000004 /* Transmit Urgent Water-Mark Interrupt Mask */ -#define SPI_IMSK_ROM 0x00000010 /* Receive Over-Run Error Interrupt Mask */ -#define SPI_IMSK_TUM 0x00000020 /* Transmit Under-Run Error Interrupt Mask */ -#define SPI_IMSK_TCM 0x00000040 /* Transmit Collision Error Interrupt Mask */ -#define SPI_IMSK_MFM 0x00000080 /* Mode Fault Error Interrupt Mask */ -#define SPI_IMSK_RSM 0x00000100 /* Receive Start Interrupt Mask */ -#define SPI_IMSK_TSM 0x00000200 /* Transmit Start Interrupt Mask */ -#define SPI_IMSK_RFM 0x00000400 /* Receive Finish Interrupt Mask */ -#define SPI_IMSK_TFM 0x00000800 /* Transmit Finish Interrupt Mask */ -/* SPI_IMASKCL */ -#define SPI_IMSK_CLR_RUW 0x00000002 /* Receive Urgent Water-Mark Interrupt Mask */ -#define SPI_IMSK_CLR_TUWM 0x00000004 /* Transmit Urgent Water-Mark Interrupt Mask */ -#define SPI_IMSK_CLR_ROM 0x00000010 /* Receive Over-Run Error Interrupt Mask */ -#define SPI_IMSK_CLR_TUM 0x00000020 /* Transmit Under-Run Error Interrupt Mask */ -#define SPI_IMSK_CLR_TCM 0x00000040 /* Transmit Collision Error Interrupt Mask */ -#define SPI_IMSK_CLR_MFM 0x00000080 /* Mode Fault Error Interrupt Mask */ -#define SPI_IMSK_CLR_RSM 0x00000100 /* Receive Start Interrupt Mask */ -#define SPI_IMSK_CLR_TSM 0x00000200 /* Transmit Start Interrupt Mask */ -#define SPI_IMSK_CLR_RFM 0x00000400 /* Receive Finish Interrupt Mask */ -#define SPI_IMSK_CLR_TFM 0x00000800 /* Transmit Finish Interrupt Mask */ -/* SPI_IMASKST */ -#define SPI_IMSK_SET_RUWM 0x00000002 /* Receive Urgent Water-Mark Interrupt Mask */ -#define SPI_IMSK_SET_TUWM 0x00000004 /* Transmit Urgent Water-Mark Interrupt Mask */ -#define SPI_IMSK_SET_ROM 0x00000010 /* Receive Over-Run Error Interrupt Mask */ -#define SPI_IMSK_SET_TUM 0x00000020 /* Transmit Under-Run Error Interrupt Mask */ -#define SPI_IMSK_SET_TCM 0x00000040 /* Transmit Collision Error Interrupt Mask */ -#define SPI_IMSK_SET_MFM 0x00000080 /* Mode Fault Error Interrupt Mask */ -#define SPI_IMSK_SET_RSM 0x00000100 /* Receive Start Interrupt Mask */ -#define SPI_IMSK_SET_TSM 0x00000200 /* Transmit Start Interrupt Mask */ -#define SPI_IMSK_SET_RFM 0x00000400 /* Receive Finish Interrupt Mask */ -#define SPI_IMSK_SET_TFM 0x00000800 /* Transmit Finish Interrupt Mask */ -/* SPI_STATUS */ -#define SPI_STAT_SPIF 0x00000001 /* SPI Finished */ -#define SPI_STAT_RUWM 0x00000002 /* Receive Urgent Water-Mark Breached */ -#define SPI_STAT_TUWM 0x00000004 /* Transmit Urgent Water-Mark Breached */ -#define SPI_STAT_ROE 0x00000010 /* Receive Over-Run Error Indication */ -#define SPI_STAT_TUE 0x00000020 /* Transmit Under-Run Error Indication */ -#define SPI_STAT_TCE 0x00000040 /* Transmit Collision Error Indication */ -#define SPI_STAT_MODF 0x00000080 /* Mode Fault Error Indication */ -#define SPI_STAT_RS 0x00000100 /* Receive Start Indication */ -#define SPI_STAT_TS 0x00000200 /* Transmit Start Indication */ -#define SPI_STAT_RF 0x00000400 /* Receive Finish Indication */ -#define SPI_STAT_TF 0x00000800 /* Transmit Finish Indication */ -#define SPI_STAT_RFS 0x00007000 /* SPI_RFIFO status */ -#define SPI_STAT_RFIFO_EMPTY 0x00000000 /* RFS: RFIFO Empty */ -#define SPI_STAT_RFIFO_25 0x00001000 /* RFS: RFIFO 25% Full */ -#define SPI_STAT_RFIFO_50 0x00002000 /* RFS: RFIFO 50% Full */ -#define SPI_STAT_RFIFO_75 0x00003000 /* RFS: RFIFO 75% Full */ -#define SPI_STAT_RFIFO_FULL 0x00004000 /* RFS: RFIFO Full */ -#define SPI_STAT_TFS 0x00070000 /* SPI_TFIFO status */ -#define SPI_STAT_TFIFO_FULL 0x00000000 /* TFS: TFIFO full */ -#define SPI_STAT_TFIFO_25 0x00010000 /* TFS: TFIFO 25% empty */ -#define SPI_STAT_TFIFO_50 0x00020000 /* TFS: TFIFO 50% empty */ -#define SPI_STAT_TFIFO_75 0x00030000 /* TFS: TFIFO 75% empty */ -#define SPI_STAT_TFIFO_EMPTY 0x00040000 /* TFS: TFIFO empty */ -#define SPI_STAT_FCS 0x00100000 /* Flow-Control Stall Indication */ -#define SPI_STAT_RFE 0x00400000 /* SPI_RFIFO Empty */ -#define SPI_STAT_TFF 0x00800000 /* SPI_TFIFO Full */ -/* SPI_ILAT */ -#define SPI_ILAT_RUWMI 0x00000002 /* Receive Urgent Water Mark Interrupt */ -#define SPI_ILAT_TUWMI 0x00000004 /* Transmit Urgent Water Mark Interrupt */ -#define SPI_ILAT_ROI 0x00000010 /* Receive Over-Run Error Indication */ -#define SPI_ILAT_TUI 0x00000020 /* Transmit Under-Run Error Indication */ -#define SPI_ILAT_TCI 0x00000040 /* Transmit Collision Error Indication */ -#define SPI_ILAT_MFI 0x00000080 /* Mode Fault Error Indication */ -#define SPI_ILAT_RSI 0x00000100 /* Receive Start Indication */ -#define SPI_ILAT_TSI 0x00000200 /* Transmit Start Indication */ -#define SPI_ILAT_RFI 0x00000400 /* Receive Finish Indication */ -#define SPI_ILAT_TFI 0x00000800 /* Transmit Finish Indication */ -/* SPI_ILATCL */ -#define SPI_ILAT_CLR_RUWMI 0x00000002 /* Receive Urgent Water Mark Interrupt */ -#define SPI_ILAT_CLR_TUWMI 0x00000004 /* Transmit Urgent Water Mark Interrupt */ -#define SPI_ILAT_CLR_ROI 0x00000010 /* Receive Over-Run Error Indication */ -#define SPI_ILAT_CLR_TUI 0x00000020 /* Transmit Under-Run Error Indication */ -#define SPI_ILAT_CLR_TCI 0x00000040 /* Transmit Collision Error Indication */ -#define SPI_ILAT_CLR_MFI 0x00000080 /* Mode Fault Error Indication */ -#define SPI_ILAT_CLR_RSI 0x00000100 /* Receive Start Indication */ -#define SPI_ILAT_CLR_TSI 0x00000200 /* Transmit Start Indication */ -#define SPI_ILAT_CLR_RFI 0x00000400 /* Receive Finish Indication */ -#define SPI_ILAT_CLR_TFI 0x00000800 /* Transmit Finish Indication */ - -/* - * bfin spi3 registers layout - */ -struct bfin_spi_regs { - u32 revid; - u32 control; - u32 rx_control; - u32 tx_control; - u32 clock; - u32 delay; - u32 ssel; - u32 rwc; - u32 rwcr; - u32 twc; - u32 twcr; - u32 reserved0; - u32 emask; - u32 emaskcl; - u32 emaskst; - u32 reserved1; - u32 status; - u32 elat; - u32 elatcl; - u32 reserved2; - u32 rfifo; - u32 reserved3; - u32 tfifo; -}; - -#define MAX_CTRL_CS 8 /* cs in spi controller */ - -/* device.platform_data for SSP controller devices */ -struct bfin6xx_spi_master { - u16 num_chipselect; - u16 pin_req[7]; -}; - -/* spi_board_info.controller_data for SPI slave devices, - * copied to spi_device.platform_data ... mostly for dma tuning - */ -struct bfin6xx_spi_chip { - u32 control; - u16 cs_chg_udelay; /* Some devices require 16-bit delays */ - u32 tx_dummy_val; /* tx value for rx only transfer */ - bool enable_dma; -}; - -#endif /* _SPI_CHANNEL_H_ */ diff --git a/arch/blackfin/include/asm/bfin_crc.h b/arch/blackfin/include/asm/bfin_crc.h deleted file mode 100644 index 75cef4dc85a..00000000000 --- a/arch/blackfin/include/asm/bfin_crc.h +++ /dev/null @@ -1,125 +0,0 @@ -/* - * bfin_crc.h - interface to Blackfin CRC controllers - * - * Copyright 2012 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#ifndef __BFIN_CRC_H__ -#define __BFIN_CRC_H__ - -/* Function driver which use hardware crc must initialize the structure */ -struct crc_info { - /* Input data address */ - unsigned char *in_addr; - /* Output data address */ - unsigned char *out_addr; - /* Input or output bytes */ - unsigned long datasize; - union { - /* CRC to compare with that of input buffer */ - unsigned long crc_compare; - /* Value to compare with input data */ - unsigned long val_verify; - /* Value to fill */ - unsigned long val_fill; - }; - /* Value to program the 32b CRC Polynomial */ - unsigned long crc_poly; - union { - /* CRC calculated from the input data */ - unsigned long crc_result; - /* First failed position to verify input data */ - unsigned long pos_verify; - }; - /* CRC mirror flags */ - unsigned int bitmirr:1; - unsigned int bytmirr:1; - unsigned int w16swp:1; - unsigned int fdsel:1; - unsigned int rsltmirr:1; - unsigned int polymirr:1; - unsigned int cmpmirr:1; -}; - -/* Userspace interface */ -#define CRC_IOC_MAGIC 'C' -#define CRC_IOC_CALC_CRC _IOWR('C', 0x01, unsigned int) -#define CRC_IOC_MEMCPY_CRC _IOWR('C', 0x02, unsigned int) -#define CRC_IOC_VERIFY_VAL _IOWR('C', 0x03, unsigned int) -#define CRC_IOC_FILL_VAL _IOWR('C', 0x04, unsigned int) - - -#ifdef __KERNEL__ - -#include <linux/types.h> -#include <linux/spinlock.h> -#include <linux/miscdevice.h> - -struct crc_register { - u32 control; - u32 datacnt; - u32 datacntrld; - u32 __pad_1[2]; - u32 compare; - u32 fillval; - u32 datafifo; - u32 intren; - u32 intrenset; - u32 intrenclr; - u32 poly; - u32 __pad_2[4]; - u32 status; - u32 datacntcap; - u32 __pad_3; - u32 result; - u32 curresult; - u32 __pad_4[3]; - u32 revid; -}; - -/* CRC_STATUS Masks */ -#define CMPERR 0x00000002 /* Compare error */ -#define DCNTEXP 0x00000010 /* datacnt register expired */ -#define IBR 0x00010000 /* Input buffer ready */ -#define OBR 0x00020000 /* Output buffer ready */ -#define IRR 0x00040000 /* Immediate result readt */ -#define LUTDONE 0x00080000 /* Look-up table generation done */ -#define FSTAT 0x00700000 /* FIFO status */ -#define MAX_FIFO 4 /* Max fifo size */ - -/* CRC_CONTROL Masks */ -#define BLKEN 0x00000001 /* Block enable */ -#define OPMODE 0x000000F0 /* Operation mode */ -#define OPMODE_OFFSET 4 /* Operation mode mask offset*/ -#define MODE_DMACPY_CRC 1 /* MTM CRC compute and compare */ -#define MODE_DATA_FILL 2 /* MTM data fill */ -#define MODE_CALC_CRC 3 /* MSM CRC compute and compare */ -#define MODE_DATA_VERIFY 4 /* MSM data verify */ -#define AUTOCLRZ 0x00000100 /* Auto clear to zero */ -#define AUTOCLRF 0x00000200 /* Auto clear to one */ -#define OBRSTALL 0x00001000 /* Stall on output buffer ready */ -#define IRRSTALL 0x00002000 /* Stall on immediate result ready */ -#define BITMIRR 0x00010000 /* Mirror bits within each byte of 32-bit input data */ -#define BITMIRR_OFFSET 16 /* Mirror bits offset */ -#define BYTMIRR 0x00020000 /* Mirror bytes of 32-bit input data */ -#define BYTMIRR_OFFSET 17 /* Mirror bytes offset */ -#define W16SWP 0x00040000 /* Mirror uppper and lower 16-bit word of 32-bit input data */ -#define W16SWP_OFFSET 18 /* Mirror 16-bit word offset */ -#define FDSEL 0x00080000 /* FIFO is written after input data is mirrored */ -#define FDSEL_OFFSET 19 /* Mirror FIFO offset */ -#define RSLTMIRR 0x00100000 /* CRC result registers are mirrored. */ -#define RSLTMIRR_OFFSET 20 /* Mirror CRC result offset. */ -#define POLYMIRR 0x00200000 /* CRC poly register is mirrored. */ -#define POLYMIRR_OFFSET 21 /* Mirror CRC poly offset. */ -#define CMPMIRR 0x00400000 /* CRC compare register is mirrored. */ -#define CMPMIRR_OFFSET 22 /* Mirror CRC compare offset. */ - -/* CRC_INTREN Masks */ -#define CMPERRI 0x02 /* CRC_ERROR_INTR */ -#define DCNTEXPI 0x10 /* CRC_STATUS_INTR */ - -#endif - -#endif diff --git a/arch/blackfin/include/asm/bfin_sdh.h b/arch/blackfin/include/asm/bfin_sdh.h index 6a4cfe2d336..a99957ea9e9 100644 --- a/arch/blackfin/include/asm/bfin_sdh.h +++ b/arch/blackfin/include/asm/bfin_sdh.h @@ -24,18 +24,27 @@ struct bfin_sd_host { #define CMD_INT_E (1 << 8) /* Command Interrupt */ #define CMD_PEND_E (1 << 9) /* Command Pending */ #define CMD_E (1 << 10) /* Command Enable */ +#ifdef RSI_BLKSZ +#define CMD_CRC_CHECK_D (1 << 11) /* CRC Check is disabled */ +#define CMD_DATA0_BUSY (1 << 12) /* Check for Busy State on the DATA0 pin */ +#endif /* SDH_PWR_CTL bitmasks */ +#ifndef RSI_BLKSZ #define PWR_ON 0x3 /* Power On */ #define SD_CMD_OD (1 << 6) /* Open Drain Output */ #define ROD_CTL (1 << 7) /* Rod Control */ +#endif /* SDH_CLK_CTL bitmasks */ #define CLKDIV 0xff /* MC_CLK Divisor */ #define CLK_E (1 << 8) /* MC_CLK Bus Clock Enable */ #define PWR_SV_E (1 << 9) /* Power Save Enable */ #define CLKDIV_BYPASS (1 << 10) /* Bypass Divisor */ -#define WIDE_BUS (1 << 11) /* Wide Bus Mode Enable */ +#define BUS_MODE_MASK 0x1800 /* Bus Mode Mask */ +#define STD_BUS_1 0x000 /* Standard Bus 1 bit mode */ +#define WIDE_BUS_4 0x800 /* Wide Bus 4 bit mode */ +#define BYTE_BUS_8 0x1000 /* Byte Bus 8 bit mode */ /* SDH_RESP_CMD bitmasks */ #define RESP_CMD 0x3f /* Response Command */ @@ -45,7 +54,13 @@ struct bfin_sd_host { #define DTX_DIR (1 << 1) /* Data Transfer Direction */ #define DTX_MODE (1 << 2) /* Data Transfer Mode */ #define DTX_DMA_E (1 << 3) /* Data Transfer DMA Enable */ +#ifndef RSI_BLKSZ #define DTX_BLK_LGTH (0xf << 4) /* Data Transfer Block Length */ +#else + +/* Bit masks for SDH_BLK_SIZE */ +#define DTX_BLK_LGTH 0x1fff /* Data Transfer Block Length */ +#endif /* SDH_STATUS bitmasks */ #define CMD_CRC_FAIL (1 << 0) /* CMD CRC Fail */ @@ -114,10 +129,14 @@ struct bfin_sd_host { /* SDH_E_STATUS bitmasks */ #define SDIO_INT_DET (1 << 1) /* SDIO Int Detected */ #define SD_CARD_DET (1 << 4) /* SD Card Detect */ +#define SD_CARD_BUSYMODE (1 << 31) /* Card is in Busy mode */ +#define SD_CARD_SLPMODE (1 << 30) /* Card in Sleep Mode */ +#define SD_CARD_READY (1 << 17) /* Card Ready */ /* SDH_E_MASK bitmasks */ #define SDIO_MSK (1 << 1) /* Mask SDIO Int Detected */ -#define SCD_MSK (1 << 6) /* Mask Card Detect */ +#define SCD_MSK (1 << 4) /* Mask Card Detect */ +#define CARD_READY_MSK (1 << 16) /* Mask Card Ready */ /* SDH_CFG bitmasks */ #define CLKS_EN (1 << 0) /* Clocks Enable */ @@ -126,7 +145,15 @@ struct bfin_sd_host { #define SD_RST (1 << 4) /* SDMMC Reset */ #define PUP_SDDAT (1 << 5) /* Pull-up SD_DAT */ #define PUP_SDDAT3 (1 << 6) /* Pull-up SD_DAT3 */ +#ifndef RSI_BLKSZ #define PD_SDDAT3 (1 << 7) /* Pull-down SD_DAT3 */ +#else +#define PWR_ON 0x600 /* Power On */ +#define SD_CMD_OD (1 << 11) /* Open Drain Output */ +#define BOOT_EN (1 << 12) /* Boot Enable */ +#define BOOT_MODE (1 << 13) /* Alternate Boot Mode */ +#define BOOT_ACK_EN (1 << 14) /* Boot ACK is expected */ +#endif /* SDH_RD_WAIT_EN bitmasks */ #define RWR (1 << 0) /* Read Wait Request */ diff --git a/arch/blackfin/include/asm/bfin_sport.h b/arch/blackfin/include/asm/bfin_sport.h index f8907ea6b5b..50b9dfd4839 100644 --- a/arch/blackfin/include/asm/bfin_sport.h +++ b/arch/blackfin/include/asm/bfin_sport.h @@ -5,65 +5,12 @@ * * Licensed under the GPL-2 or later. */ - #ifndef __BFIN_SPORT_H__ #define __BFIN_SPORT_H__ -/* Sport mode: it can be set to TDM, i2s or others */ -#define NORM_MODE 0x0 -#define TDM_MODE 0x1 -#define I2S_MODE 0x2 -#define NDSO_MODE 0x3 - -/* Data format, normal, a-law or u-law */ -#define NORM_FORMAT 0x0 -#define ALAW_FORMAT 0x2 -#define ULAW_FORMAT 0x3 - -/* Function driver which use sport must initialize the structure */ -struct sport_config { - /* TDM (multichannels), I2S or other mode */ - unsigned int mode:3; - unsigned int polled; /* use poll instead of irq when set */ - - /* if TDM mode is selected, channels must be set */ - int channels; /* Must be in 8 units */ - unsigned int frame_delay:4; /* Delay between frame sync pulse and first bit */ - - /* I2S mode */ - unsigned int right_first:1; /* Right stereo channel first */ - - /* In mormal mode, the following item need to be set */ - unsigned int lsb_first:1; /* order of transmit or receive data */ - unsigned int fsync:1; /* Frame sync required */ - unsigned int data_indep:1; /* data independent frame sync generated */ - unsigned int act_low:1; /* Active low TFS */ - unsigned int late_fsync:1; /* Late frame sync */ - unsigned int tckfe:1; - unsigned int sec_en:1; /* Secondary side enabled */ - - /* Choose clock source */ - unsigned int int_clk:1; /* Internal or external clock */ - - /* If external clock is used, the following fields are ignored */ - int serial_clk; - int fsync_clk; - - unsigned int data_format:2; /* Normal, u-law or a-law */ - - int word_len; /* How length of the word in bits, 3-32 bits */ - int dma_enabled; -}; - -/* Userspace interface */ -#define SPORT_IOC_MAGIC 'P' -#define SPORT_IOC_CONFIG _IOWR('P', 0x01, struct sport_config) -#define SPORT_IOC_GET_SYSTEMCLOCK _IOR('P', 0x02, unsigned long) -#define SPORT_IOC_SET_BAUDRATE _IOW('P', 0x03, unsigned long) - -#ifdef __KERNEL__ #include <linux/types.h> +#include <uapi/asm/bfin_sport.h> /* * All Blackfin system MMRs are padded to 32bits even if the register @@ -122,76 +69,3 @@ struct bfin_snd_platform_data { }) #endif - -/* SPORT_TCR1 Masks */ -#define TSPEN 0x0001 /* TX enable */ -#define ITCLK 0x0002 /* Internal TX Clock Select */ -#define TDTYPE 0x000C /* TX Data Formatting Select */ -#define DTYPE_NORM 0x0000 /* Data Format Normal */ -#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ -#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ -#define TLSBIT 0x0010 /* TX Bit Order */ -#define ITFS 0x0200 /* Internal TX Frame Sync Select */ -#define TFSR 0x0400 /* TX Frame Sync Required Select */ -#define DITFS 0x0800 /* Data Independent TX Frame Sync Select */ -#define LTFS 0x1000 /* Low TX Frame Sync Select */ -#define LATFS 0x2000 /* Late TX Frame Sync Select */ -#define TCKFE 0x4000 /* TX Clock Falling Edge Select */ - -/* SPORT_TCR2 Masks */ -#define SLEN 0x001F /* SPORT TX Word Length (2 - 31) */ -#define DP_SLEN(x) BFIN_DEPOSIT(SLEN, x) -#define EX_SLEN(x) BFIN_EXTRACT(SLEN, x) -#define TXSE 0x0100 /* TX Secondary Enable */ -#define TSFSE 0x0200 /* TX Stereo Frame Sync Enable */ -#define TRFST 0x0400 /* TX Right-First Data Order */ - -/* SPORT_RCR1 Masks */ -#define RSPEN 0x0001 /* RX enable */ -#define IRCLK 0x0002 /* Internal RX Clock Select */ -#define RDTYPE 0x000C /* RX Data Formatting Select */ -/* DTYPE_* defined above */ -#define RLSBIT 0x0010 /* RX Bit Order */ -#define IRFS 0x0200 /* Internal RX Frame Sync Select */ -#define RFSR 0x0400 /* RX Frame Sync Required Select */ -#define LRFS 0x1000 /* Low RX Frame Sync Select */ -#define LARFS 0x2000 /* Late RX Frame Sync Select */ -#define RCKFE 0x4000 /* RX Clock Falling Edge Select */ - -/* SPORT_RCR2 Masks */ -/* SLEN defined above */ -#define RXSE 0x0100 /* RX Secondary Enable */ -#define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */ -#define RRFST 0x0400 /* Right-First Data Order */ - -/* SPORT_STAT Masks */ -#define RXNE 0x0001 /* RX FIFO Not Empty Status */ -#define RUVF 0x0002 /* RX Underflow Status */ -#define ROVF 0x0004 /* RX Overflow Status */ -#define TXF 0x0008 /* TX FIFO Full Status */ -#define TUVF 0x0010 /* TX Underflow Status */ -#define TOVF 0x0020 /* TX Overflow Status */ -#define TXHRE 0x0040 /* TX Hold Register Empty */ - -/* SPORT_MCMC1 Masks */ -#define SP_WOFF 0x03FF /* Multichannel Window Offset Field */ -#define DP_SP_WOFF(x) BFIN_DEPOSIT(SP_WOFF, x) -#define EX_SP_WOFF(x) BFIN_EXTRACT(SP_WOFF, x) -#define SP_WSIZE 0xF000 /* Multichannel Window Size Field */ -#define DP_SP_WSIZE(x) BFIN_DEPOSIT(SP_WSIZE, x) -#define EX_SP_WSIZE(x) BFIN_EXTRACT(SP_WSIZE, x) - -/* SPORT_MCMC2 Masks */ -#define MCCRM 0x0003 /* Multichannel Clock Recovery Mode */ -#define REC_BYPASS 0x0000 /* Bypass Mode (No Clock Recovery) */ -#define REC_2FROM4 0x0002 /* Recover 2 MHz Clock from 4 MHz Clock */ -#define REC_8FROM16 0x0003 /* Recover 8 MHz Clock from 16 MHz Clock */ -#define MCDTXPE 0x0004 /* Multichannel DMA Transmit Packing */ -#define MCDRXPE 0x0008 /* Multichannel DMA Receive Packing */ -#define MCMEN 0x0010 /* Multichannel Frame Mode Enable */ -#define FSDR 0x0080 /* Multichannel Frame Sync to Data Relationship */ -#define MFD 0xF000 /* Multichannel Frame Delay */ -#define DP_MFD(x) BFIN_DEPOSIT(MFD, x) -#define EX_MFD(x) BFIN_EXTRACT(MFD, x) - -#endif diff --git a/arch/blackfin/include/asm/bfin_sport3.h b/arch/blackfin/include/asm/bfin_sport3.h index 03c00220d69..d82f5fa0ad9 100644 --- a/arch/blackfin/include/asm/bfin_sport3.h +++ b/arch/blackfin/include/asm/bfin_sport3.h @@ -41,7 +41,7 @@ #define SPORT_CTL_LAFS 0x00020000 /* Late Transmit frame select */ #define SPORT_CTL_RJUST 0x00040000 /* Right Justified mode select */ #define SPORT_CTL_FSED 0x00080000 /* External frame sync edge select */ -#define SPORT_CTL_TFIEN 0x00100000 /* Transmit finish interrrupt enable select */ +#define SPORT_CTL_TFIEN 0x00100000 /* Transmit finish interrupt enable select */ #define SPORT_CTL_GCLKEN 0x00200000 /* Gated clock mode select */ #define SPORT_CTL_SPENSEC 0x01000000 /* Enable secondary channel */ #define SPORT_CTL_SPTRAN 0x02000000 /* Data direction control */ diff --git a/arch/blackfin/include/asm/bfin_twi.h b/arch/blackfin/include/asm/bfin_twi.h index f4a07278743..aaa0834d34a 100644 --- a/arch/blackfin/include/asm/bfin_twi.h +++ b/arch/blackfin/include/asm/bfin_twi.h @@ -9,60 +9,7 @@ #ifndef __ASM_BFIN_TWI_H__ #define __ASM_BFIN_TWI_H__ -#include <linux/types.h> -#include <linux/i2c.h> - -/* - * All Blackfin system MMRs are padded to 32bits even if the register - * itself is only 16bits. So use a helper macro to streamline this. - */ -#define __BFP(m) u16 m; u16 __pad_##m - -/* - * bfin twi registers layout - */ -struct bfin_twi_regs { - __BFP(clkdiv); - __BFP(control); - __BFP(slave_ctl); - __BFP(slave_stat); - __BFP(slave_addr); - __BFP(master_ctl); - __BFP(master_stat); - __BFP(master_addr); - __BFP(int_stat); - __BFP(int_mask); - __BFP(fifo_ctl); - __BFP(fifo_stat); - u32 __pad[20]; - __BFP(xmt_data8); - __BFP(xmt_data16); - __BFP(rcv_data8); - __BFP(rcv_data16); -}; - -#undef __BFP - -struct bfin_twi_iface { - int irq; - spinlock_t lock; - char read_write; - u8 command; - u8 *transPtr; - int readNum; - int writeNum; - int cur_mode; - int manual_stop; - int result; - struct i2c_adapter adap; - struct completion complete; - struct i2c_msg *pmsg; - int msg_num; - int cur_msg; - u16 saved_clkdiv; - u16 saved_control; - struct bfin_twi_regs *regs_base; -}; +#include <asm/blackfin.h> #define DEFINE_TWI_REG(reg_name, reg) \ static inline u16 read_##reg_name(struct bfin_twi_iface *iface) \ @@ -71,7 +18,6 @@ static inline void write_##reg_name(struct bfin_twi_iface *iface, u16 v) \ { bfin_write16(&iface->regs_base->reg, v); } DEFINE_TWI_REG(CLKDIV, clkdiv) -DEFINE_TWI_REG(CONTROL, control) DEFINE_TWI_REG(SLAVE_CTL, slave_ctl) DEFINE_TWI_REG(SLAVE_STAT, slave_stat) DEFINE_TWI_REG(SLAVE_ADDR, slave_addr) @@ -80,7 +26,6 @@ DEFINE_TWI_REG(MASTER_STAT, master_stat) DEFINE_TWI_REG(MASTER_ADDR, master_addr) DEFINE_TWI_REG(INT_STAT, int_stat) DEFINE_TWI_REG(INT_MASK, int_mask) -DEFINE_TWI_REG(FIFO_CTL, fifo_ctl) DEFINE_TWI_REG(FIFO_STAT, fifo_stat) DEFINE_TWI_REG(XMT_DATA8, xmt_data8) DEFINE_TWI_REG(XMT_DATA16, xmt_data16) @@ -113,75 +58,25 @@ static inline u16 read_RCV_DATA16(struct bfin_twi_iface *iface) } #endif +static inline u16 read_FIFO_CTL(struct bfin_twi_iface *iface) +{ + return bfin_read16(&iface->regs_base->fifo_ctl); +} -/* ******************** TWO-WIRE INTERFACE (TWI) MASKS ***********************/ -/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y); ) */ -#define CLKLOW(x) ((x) & 0xFF) /* Periods Clock Is Held Low */ -#define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */ - -/* TWI_PRESCALE Masks */ -#define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */ -#define TWI_ENA 0x0080 /* TWI Enable */ -#define SCCB 0x0200 /* SCCB Compatibility Enable */ - -/* TWI_SLAVE_CTL Masks */ -#define SEN 0x0001 /* Slave Enable */ -#define SADD_LEN 0x0002 /* Slave Address Length */ -#define STDVAL 0x0004 /* Slave Transmit Data Valid */ -#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */ -#define GEN 0x0010 /* General Call Address Matching Enabled */ - -/* TWI_SLAVE_STAT Masks */ -#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */ -#define GCALL 0x0002 /* General Call Indicator */ - -/* TWI_MASTER_CTL Masks */ -#define MEN 0x0001 /* Master Mode Enable */ -#define MADD_LEN 0x0002 /* Master Address Length */ -#define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */ -#define FAST 0x0008 /* Use Fast Mode Timing Specs */ -#define STOP 0x0010 /* Issue Stop Condition */ -#define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */ -#define DCNT 0x3FC0 /* Data Bytes To Transfer */ -#define SDAOVR 0x4000 /* Serial Data Override */ -#define SCLOVR 0x8000 /* Serial Clock Override */ - -/* TWI_MASTER_STAT Masks */ -#define MPROG 0x0001 /* Master Transfer In Progress */ -#define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */ -#define ANAK 0x0004 /* Address Not Acknowledged */ -#define DNAK 0x0008 /* Data Not Acknowledged */ -#define BUFRDERR 0x0010 /* Buffer Read Error */ -#define BUFWRERR 0x0020 /* Buffer Write Error */ -#define SDASEN 0x0040 /* Serial Data Sense */ -#define SCLSEN 0x0080 /* Serial Clock Sense */ -#define BUSBUSY 0x0100 /* Bus Busy Indicator */ - -/* TWI_INT_SRC and TWI_INT_ENABLE Masks */ -#define SINIT 0x0001 /* Slave Transfer Initiated */ -#define SCOMP 0x0002 /* Slave Transfer Complete */ -#define SERR 0x0004 /* Slave Transfer Error */ -#define SOVF 0x0008 /* Slave Overflow */ -#define MCOMP 0x0010 /* Master Transfer Complete */ -#define MERR 0x0020 /* Master Transfer Error */ -#define XMTSERV 0x0040 /* Transmit FIFO Service */ -#define RCVSERV 0x0080 /* Receive FIFO Service */ - -/* TWI_FIFO_CTRL Masks */ -#define XMTFLUSH 0x0001 /* Transmit Buffer Flush */ -#define RCVFLUSH 0x0002 /* Receive Buffer Flush */ -#define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */ -#define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */ - -/* TWI_FIFO_STAT Masks */ -#define XMTSTAT 0x0003 /* Transmit FIFO Status */ -#define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */ -#define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */ -#define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */ +static inline void write_FIFO_CTL(struct bfin_twi_iface *iface, u16 v) +{ + bfin_write16(&iface->regs_base->fifo_ctl, v); + SSYNC(); +} -#define RCVSTAT 0x000C /* Receive FIFO Status */ -#define RCV_EMPTY 0x0000 /* Receive FIFO Empty */ -#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */ -#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */ +static inline u16 read_CONTROL(struct bfin_twi_iface *iface) +{ + return bfin_read16(&iface->regs_base->control); +} +static inline void write_CONTROL(struct bfin_twi_iface *iface, u16 v) +{ + SSYNC(); + bfin_write16(&iface->regs_base->control, v); +} #endif diff --git a/arch/blackfin/include/asm/bitops.h b/arch/blackfin/include/asm/bitops.h index 8a0fed16058..b298b654a26 100644 --- a/arch/blackfin/include/asm/bitops.h +++ b/arch/blackfin/include/asm/bitops.h @@ -27,16 +27,13 @@ #include <asm-generic/bitops/ext2-atomic.h> +#include <asm/barrier.h> + #ifndef CONFIG_SMP #include <linux/irqflags.h> - /* * clear_bit may not imply a memory barrier */ -#ifndef smp_mb__before_clear_bit -#define smp_mb__before_clear_bit() smp_mb() -#define smp_mb__after_clear_bit() smp_mb() -#endif #include <asm-generic/bitops/atomic.h> #include <asm-generic/bitops/non-atomic.h> #else @@ -100,12 +97,6 @@ static inline int test_and_change_bit(int nr, volatile unsigned long *addr) return __raw_bit_test_toggle_asm(a, nr & 0x1f); } -/* - * clear_bit() doesn't provide any barrier for the compiler. - */ -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() - #define test_bit __skip_test_bit #include <asm-generic/bitops/non-atomic.h> #undef test_bit diff --git a/arch/blackfin/include/asm/byteorder.h b/arch/blackfin/include/asm/byteorder.h deleted file mode 100644 index 9558416d578..00000000000 --- a/arch/blackfin/include/asm/byteorder.h +++ /dev/null @@ -1 +0,0 @@ -#include <linux/byteorder/little_endian.h> diff --git a/arch/blackfin/include/asm/clkdev.h b/arch/blackfin/include/asm/clkdev.h index 9053beda8c5..7ac2436856a 100644 --- a/arch/blackfin/include/asm/clkdev.h +++ b/arch/blackfin/include/asm/clkdev.h @@ -8,7 +8,9 @@ static inline struct clk_lookup_alloc *__clkdev_alloc(size_t size) return kzalloc(size, GFP_KERNEL); } +#ifndef CONFIG_COMMON_CLK #define __clk_put(clk) #define __clk_get(clk) ({ 1; }) +#endif #endif diff --git a/arch/blackfin/include/asm/def_LPBlackfin.h b/arch/blackfin/include/asm/def_LPBlackfin.h index fe0ca03a1cb..c5c8d8a3a5f 100644 --- a/arch/blackfin/include/asm/def_LPBlackfin.h +++ b/arch/blackfin/include/asm/def_LPBlackfin.h @@ -544,6 +544,7 @@ do { \ #define DCBS_P 0x04 /* L1 Data Cache Bank Select */ #define PORT_PREF0_P 0x12 /* DAG0 Port Preference */ #define PORT_PREF1_P 0x13 /* DAG1 Port Preference */ +#define RDCHK 0x9 /* Enable L1 Parity Check */ /* Masks */ #define ENDM 0x00000001 /* (doesn't really exist) Enable @@ -622,10 +623,12 @@ do { \ #define PAGE_SIZE_4KB 0x00010000 /* 4 KB page size */ #define PAGE_SIZE_1MB 0x00020000 /* 1 MB page size */ #define PAGE_SIZE_4MB 0x00030000 /* 4 MB page size */ +#ifdef CONFIG_BF60x #define PAGE_SIZE_16KB 0x00040000 /* 16 KB page size */ #define PAGE_SIZE_64KB 0x00050000 /* 64 KB page size */ #define PAGE_SIZE_16MB 0x00060000 /* 16 MB page size */ #define PAGE_SIZE_64MB 0x00070000 /* 64 MB page size */ +#endif #define CPLB_L1SRAM 0x00000020 /* 0=SRAM mapped in L1, 0=SRAM not * mapped to L1 */ diff --git a/arch/blackfin/include/asm/dma-mapping.h b/arch/blackfin/include/asm/dma-mapping.h index bbf461076a0..054d9ec57d9 100644 --- a/arch/blackfin/include/asm/dma-mapping.h +++ b/arch/blackfin/include/asm/dma-mapping.h @@ -154,4 +154,14 @@ dma_cache_sync(struct device *dev, void *vaddr, size_t size, _dma_sync((dma_addr_t)vaddr, size, dir); } +/* drivers/base/dma-mapping.c */ +extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma, + void *cpu_addr, dma_addr_t dma_addr, size_t size); +extern int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt, + void *cpu_addr, dma_addr_t dma_addr, + size_t size); + +#define dma_mmap_coherent(d, v, c, h, s) dma_common_mmap(d, v, c, h, s) +#define dma_get_sgtable(d, t, v, h, s) dma_common_get_sgtable(d, t, v, h, s) + #endif /* _BLACKFIN_DMA_MAPPING_H */ diff --git a/arch/blackfin/include/asm/elf.h b/arch/blackfin/include/asm/elf.h index 14bc98ff668..d15cb9b5d52 100644 --- a/arch/blackfin/include/asm/elf.h +++ b/arch/blackfin/include/asm/elf.h @@ -132,7 +132,4 @@ do { \ #define ELF_PLATFORM (NULL) -#define SET_PERSONALITY(ex) \ - set_personality(PER_LINUX | (current->personality & (~PER_MASK))) - #endif diff --git a/arch/blackfin/include/asm/fixed_code.h b/arch/blackfin/include/asm/fixed_code.h index 5395088b2d0..bc330f06207 100644 --- a/arch/blackfin/include/asm/fixed_code.h +++ b/arch/blackfin/include/asm/fixed_code.h @@ -6,11 +6,11 @@ * * Licensed under the GPL-2 or later. */ - #ifndef __BFIN_ASM_FIXED_CODE_H__ #define __BFIN_ASM_FIXED_CODE_H__ -#ifdef __KERNEL__ +#include <uapi/asm/fixed_code.h> + #ifndef __ASSEMBLY__ #include <linux/linkage.h> #include <linux/ptrace.h> @@ -28,29 +28,3 @@ extern void safe_user_instruction(void); extern void sigreturn_stub(void); #endif #endif - -#ifndef CONFIG_PHY_RAM_BASE_ADDRESS -#define CONFIG_PHY_RAM_BASE_ADDRESS 0x0 -#endif - -#define FIXED_CODE_START (CONFIG_PHY_RAM_BASE_ADDRESS + 0x400) - -#define SIGRETURN_STUB (CONFIG_PHY_RAM_BASE_ADDRESS + 0x400) - -#define ATOMIC_SEQS_START (CONFIG_PHY_RAM_BASE_ADDRESS + 0x410) - -#define ATOMIC_XCHG32 (CONFIG_PHY_RAM_BASE_ADDRESS + 0x410) -#define ATOMIC_CAS32 (CONFIG_PHY_RAM_BASE_ADDRESS + 0x420) -#define ATOMIC_ADD32 (CONFIG_PHY_RAM_BASE_ADDRESS + 0x430) -#define ATOMIC_SUB32 (CONFIG_PHY_RAM_BASE_ADDRESS + 0x440) -#define ATOMIC_IOR32 (CONFIG_PHY_RAM_BASE_ADDRESS + 0x450) -#define ATOMIC_AND32 (CONFIG_PHY_RAM_BASE_ADDRESS + 0x460) -#define ATOMIC_XOR32 (CONFIG_PHY_RAM_BASE_ADDRESS + 0x470) - -#define ATOMIC_SEQS_END (CONFIG_PHY_RAM_BASE_ADDRESS + 0x480) - -#define SAFE_USER_INSTRUCTION (CONFIG_PHY_RAM_BASE_ADDRESS + 0x480) - -#define FIXED_CODE_END (CONFIG_PHY_RAM_BASE_ADDRESS + 0x490) - -#endif diff --git a/arch/blackfin/include/asm/ftrace.h b/arch/blackfin/include/asm/ftrace.h index 8a029505d7b..2f1c3c2657a 100644 --- a/arch/blackfin/include/asm/ftrace.h +++ b/arch/blackfin/include/asm/ftrace.h @@ -66,16 +66,7 @@ extern inline void *return_address(unsigned int level) #endif /* CONFIG_FRAME_POINTER */ -#define HAVE_ARCH_CALLER_ADDR - -/* inline function or macro may lead to unexpected result */ -#define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0)) -#define CALLER_ADDR1 ((unsigned long)return_address(1)) -#define CALLER_ADDR2 ((unsigned long)return_address(2)) -#define CALLER_ADDR3 ((unsigned long)return_address(3)) -#define CALLER_ADDR4 ((unsigned long)return_address(4)) -#define CALLER_ADDR5 ((unsigned long)return_address(5)) -#define CALLER_ADDR6 ((unsigned long)return_address(6)) +#define ftrace_return_address(n) return_address(n) #endif /* __ASSEMBLY__ */ diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h index 98d0133346b..99d338ca2ea 100644 --- a/arch/blackfin/include/asm/gpio.h +++ b/arch/blackfin/include/asm/gpio.h @@ -25,8 +25,12 @@ #ifndef __ASSEMBLY__ +#ifndef CONFIG_PINCTRL + #include <linux/compiler.h> -#include <linux/gpio.h> +#include <asm/blackfin.h> +#include <asm/portmux.h> +#include <asm/irq_handler.h> /*********************************************************** * @@ -45,7 +49,6 @@ * MODIFICATION HISTORY : **************************************************************/ -#if !BFIN_GPIO_PINT void set_gpio_dir(unsigned, unsigned short); void set_gpio_inen(unsigned, unsigned short); void set_gpio_polar(unsigned, unsigned short); @@ -115,7 +118,6 @@ struct gpio_port_t { unsigned short dummy16; unsigned short inen; }; -#endif #ifdef BFIN_SPECIAL_GPIO_BANKS void bfin_special_gpio_free(unsigned gpio); @@ -127,25 +129,21 @@ void bfin_special_gpio_pm_hibernate_suspend(void); #endif #ifdef CONFIG_PM -int bfin_pm_standby_ctrl(unsigned ctrl); +void bfin_gpio_pm_hibernate_restore(void); +void bfin_gpio_pm_hibernate_suspend(void); +int bfin_gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl); +int bfin_gpio_pm_standby_ctrl(unsigned ctrl); static inline int bfin_pm_standby_setup(void) { - return bfin_pm_standby_ctrl(1); + return bfin_gpio_pm_standby_ctrl(1); } static inline void bfin_pm_standby_restore(void) { - bfin_pm_standby_ctrl(0); + bfin_gpio_pm_standby_ctrl(0); } -void bfin_gpio_pm_hibernate_restore(void); -void bfin_gpio_pm_hibernate_suspend(void); -void bfin_pint_suspend(void); -void bfin_pint_resume(void); - -# if !BFIN_GPIO_PINT -int gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl); struct gpio_port_s { unsigned short data; @@ -161,7 +159,6 @@ struct gpio_port_s { unsigned short reserved; unsigned short mux; }; -# endif #endif /*CONFIG_PM*/ /*********************************************************** @@ -178,36 +175,29 @@ struct gpio_port_s { ************************************************************* * MODIFICATION HISTORY : **************************************************************/ - -int bfin_gpio_request(unsigned gpio, const char *label); -void bfin_gpio_free(unsigned gpio); int bfin_gpio_irq_request(unsigned gpio, const char *label); void bfin_gpio_irq_free(unsigned gpio); -int bfin_gpio_direction_input(unsigned gpio); -int bfin_gpio_direction_output(unsigned gpio, int value); -int bfin_gpio_get_value(unsigned gpio); -void bfin_gpio_set_value(unsigned gpio, int value); +void bfin_gpio_irq_prepare(unsigned gpio); + +static inline int irq_to_gpio(unsigned irq) +{ + return irq - GPIO_IRQ_BASE; +} +#endif /* CONFIG_PINCTRL */ #include <asm/irq.h> #include <asm/errno.h> -#ifdef CONFIG_GPIOLIB #include <asm-generic/gpio.h> /* cansleep wrappers */ static inline int gpio_get_value(unsigned int gpio) { - if (gpio < MAX_BLACKFIN_GPIOS) - return bfin_gpio_get_value(gpio); - else - return __gpio_get_value(gpio); + return __gpio_get_value(gpio); } static inline void gpio_set_value(unsigned int gpio, int value) { - if (gpio < MAX_BLACKFIN_GPIOS) - bfin_gpio_set_value(gpio, value); - else - __gpio_set_value(gpio, value); + __gpio_set_value(gpio, value); } static inline int gpio_cansleep(unsigned int gpio) @@ -219,113 +209,6 @@ static inline int gpio_to_irq(unsigned gpio) { return __gpio_to_irq(gpio); } - -#else /* !CONFIG_GPIOLIB */ - -static inline int gpio_request(unsigned gpio, const char *label) -{ - return bfin_gpio_request(gpio, label); -} - -static inline void gpio_free(unsigned gpio) -{ - return bfin_gpio_free(gpio); -} - -static inline int gpio_direction_input(unsigned gpio) -{ - return bfin_gpio_direction_input(gpio); -} - -static inline int gpio_direction_output(unsigned gpio, int value) -{ - return bfin_gpio_direction_output(gpio, value); -} - -static inline int gpio_set_debounce(unsigned gpio, unsigned debounce) -{ - return -EINVAL; -} - -static inline int gpio_request_one(unsigned gpio, unsigned long flags, const char *label) -{ - int err; - - err = bfin_gpio_request(gpio, label); - if (err) - return err; - - if (flags & GPIOF_DIR_IN) - err = bfin_gpio_direction_input(gpio); - else - err = bfin_gpio_direction_output(gpio, - (flags & GPIOF_INIT_HIGH) ? 1 : 0); - - if (err) - bfin_gpio_free(gpio); - - return err; -} - -static inline int gpio_request_array(const struct gpio *array, size_t num) -{ - int i, err; - - for (i = 0; i < num; i++, array++) { - err = gpio_request_one(array->gpio, array->flags, array->label); - if (err) - goto err_free; - } - return 0; - -err_free: - while (i--) - bfin_gpio_free((--array)->gpio); - return err; -} - -static inline void gpio_free_array(const struct gpio *array, size_t num) -{ - while (num--) - bfin_gpio_free((array++)->gpio); -} - -static inline int __gpio_get_value(unsigned gpio) -{ - return bfin_gpio_get_value(gpio); -} - -static inline void __gpio_set_value(unsigned gpio, int value) -{ - return bfin_gpio_set_value(gpio, value); -} - -static inline int gpio_get_value(unsigned gpio) -{ - return __gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - return __gpio_set_value(gpio, value); -} - -static inline int gpio_to_irq(unsigned gpio) -{ - if (likely(gpio < MAX_BLACKFIN_GPIOS)) - return gpio + GPIO_IRQ_BASE; - - return -EINVAL; -} - -#include <asm-generic/gpio.h> /* cansleep wrappers */ -#endif /* !CONFIG_GPIOLIB */ - -static inline int irq_to_gpio(unsigned irq) -{ - return (irq - GPIO_IRQ_BASE); -} - #endif /* __ASSEMBLY__ */ #endif /* __ARCH_BLACKFIN_GPIO_H__ */ diff --git a/arch/blackfin/include/asm/hardirq.h b/arch/blackfin/include/asm/hardirq.h index c078dd78d99..58b54a6d5a1 100644 --- a/arch/blackfin/include/asm/hardirq.h +++ b/arch/blackfin/include/asm/hardirq.h @@ -12,9 +12,6 @@ extern void ack_bad_irq(unsigned int irq); #define ack_bad_irq ack_bad_irq -/* Define until common code gets sane defaults */ -#define HARDIRQ_BITS 9 - #include <asm-generic/hardirq.h> #endif diff --git a/arch/blackfin/include/asm/ioctls.h b/arch/blackfin/include/asm/ioctls.h deleted file mode 100644 index eca8d75b0a8..00000000000 --- a/arch/blackfin/include/asm/ioctls.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ARCH_BFIN_IOCTLS_H__ -#define __ARCH_BFIN_IOCTLS_H__ - -#define FIOQSIZE 0x545E -#include <asm-generic/ioctls.h> - -#endif diff --git a/arch/blackfin/include/asm/irq.h b/arch/blackfin/include/asm/irq.h index 4ae1144a457..89de539ed01 100644 --- a/arch/blackfin/include/asm/irq.h +++ b/arch/blackfin/include/asm/irq.h @@ -20,16 +20,6 @@ /* SYS_IRQS and NR_IRQS are defined in <mach-bf5xx/irq.h> */ #include <mach/irq.h> -/* - * pm save bfin pint registers - */ -struct bfin_pm_pint_save { - u32 mask_set; - u32 assign; - u32 edge_set; - u32 invert_set; -}; - #if ANOMALY_05000244 && defined(CONFIG_BFIN_ICACHE) # define NOP_PAD_ANOMALY_05000244 "nop; nop;" #else diff --git a/arch/blackfin/include/asm/irq_handler.h b/arch/blackfin/include/asm/irq_handler.h index 4fbf83575db..4b2a992794d 100644 --- a/arch/blackfin/include/asm/irq_handler.h +++ b/arch/blackfin/include/asm/irq_handler.h @@ -12,11 +12,11 @@ #include <mach/irq.h> /* init functions only */ -extern int __init init_arch_irq(void); +extern int init_arch_irq(void); extern void init_exception_vectors(void); -extern void __init program_IAR(void); +extern void program_IAR(void); #ifdef init_mach_irq -extern void __init init_mach_irq(void); +extern void init_mach_irq(void); #else # define init_mach_irq() #endif diff --git a/arch/blackfin/include/asm/kvm_para.h b/arch/blackfin/include/asm/kvm_para.h deleted file mode 100644 index 14fab8f0b95..00000000000 --- a/arch/blackfin/include/asm/kvm_para.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/kvm_para.h> diff --git a/arch/blackfin/include/asm/mem_init.h b/arch/blackfin/include/asm/mem_init.h index f019e9bcefe..c865b33eeb6 100644 --- a/arch/blackfin/include/asm/mem_init.h +++ b/arch/blackfin/include/asm/mem_init.h @@ -335,6 +335,7 @@ struct ddr_config { u32 ddr_clk; u32 dmc_ddrctl; + u32 dmc_effctl; u32 dmc_ddrcfg; u32 dmc_ddrtr0; u32 dmc_ddrtr1; @@ -348,6 +349,7 @@ static struct ddr_config ddr_config_table[] __attribute__((section(".data_l1"))) [0] = { .ddr_clk = 125, .dmc_ddrctl = 0x00000904, + .dmc_effctl = 0x004400C0, .dmc_ddrcfg = 0x00000422, .dmc_ddrtr0 = 0x20705212, .dmc_ddrtr1 = 0x201003CF, @@ -358,6 +360,7 @@ static struct ddr_config ddr_config_table[] __attribute__((section(".data_l1"))) [1] = { .ddr_clk = 133, .dmc_ddrctl = 0x00000904, + .dmc_effctl = 0x004400C0, .dmc_ddrcfg = 0x00000422, .dmc_ddrtr0 = 0x20806313, .dmc_ddrtr1 = 0x2013040D, @@ -368,6 +371,7 @@ static struct ddr_config ddr_config_table[] __attribute__((section(".data_l1"))) [2] = { .ddr_clk = 150, .dmc_ddrctl = 0x00000904, + .dmc_effctl = 0x004400C0, .dmc_ddrcfg = 0x00000422, .dmc_ddrtr0 = 0x20A07323, .dmc_ddrtr1 = 0x20160492, @@ -378,6 +382,7 @@ static struct ddr_config ddr_config_table[] __attribute__((section(".data_l1"))) [3] = { .ddr_clk = 166, .dmc_ddrctl = 0x00000904, + .dmc_effctl = 0x004400C0, .dmc_ddrcfg = 0x00000422, .dmc_ddrtr0 = 0x20A07323, .dmc_ddrtr1 = 0x2016050E, @@ -388,6 +393,7 @@ static struct ddr_config ddr_config_table[] __attribute__((section(".data_l1"))) [4] = { .ddr_clk = 200, .dmc_ddrctl = 0x00000904, + .dmc_effctl = 0x004400C0, .dmc_ddrcfg = 0x00000422, .dmc_ddrtr0 = 0x20a07323, .dmc_ddrtr1 = 0x2016050f, @@ -398,6 +404,7 @@ static struct ddr_config ddr_config_table[] __attribute__((section(".data_l1"))) [5] = { .ddr_clk = 225, .dmc_ddrctl = 0x00000904, + .dmc_effctl = 0x004400C0, .dmc_ddrcfg = 0x00000422, .dmc_ddrtr0 = 0x20E0A424, .dmc_ddrtr1 = 0x302006DB, @@ -408,10 +415,11 @@ static struct ddr_config ddr_config_table[] __attribute__((section(".data_l1"))) [6] = { .ddr_clk = 250, .dmc_ddrctl = 0x00000904, + .dmc_effctl = 0x004400C0, .dmc_ddrcfg = 0x00000422, .dmc_ddrtr0 = 0x20E0A424, .dmc_ddrtr1 = 0x3020079E, - .dmc_ddrtr2 = 0x0032020D, + .dmc_ddrtr2 = 0x0032050D, .dmc_ddrmr = 0x00000842, .dmc_ddrmr1 = 0x4, }, @@ -469,6 +477,7 @@ static inline void init_dmc(u32 dmc_clk) bfin_write_DMC0_TR2(ddr_config_table[i].dmc_ddrtr2); bfin_write_DMC0_MR(ddr_config_table[i].dmc_ddrmr); bfin_write_DMC0_EMR1(ddr_config_table[i].dmc_ddrmr1); + bfin_write_DMC0_EFFCTL(ddr_config_table[i].dmc_effctl); bfin_write_DMC0_CTL(ddr_config_table[i].dmc_ddrctl); break; } diff --git a/arch/blackfin/include/asm/pci.h b/arch/blackfin/include/asm/pci.h index 74352c4597d..c737909fba4 100644 --- a/arch/blackfin/include/asm/pci.h +++ b/arch/blackfin/include/asm/pci.h @@ -10,9 +10,4 @@ #define PCIBIOS_MIN_IO 0x00001000 #define PCIBIOS_MIN_MEM 0x10000000 -static inline void pcibios_penalize_isa_irq(int irq) -{ - /* We don't do dynamic PCI IRQ allocation */ -} - #endif /* _ASM_BFIN_PCI_H */ diff --git a/arch/blackfin/include/asm/pgtable.h b/arch/blackfin/include/asm/pgtable.h index dcca3e6d6e8..0b049019eba 100644 --- a/arch/blackfin/include/asm/pgtable.h +++ b/arch/blackfin/include/asm/pgtable.h @@ -83,14 +83,11 @@ PTE_BIT_FUNC(mkyoung, |= _PAGE_ACCESSED); #define ZERO_PAGE(vaddr) virt_to_page(empty_zero_page) extern char empty_zero_page[]; -extern unsigned int kobjsize(const void *objp); - #define swapper_pg_dir ((pgd_t *) 0) /* * No page table caches to initialise. */ #define pgtable_cache_init() do { } while (0) -#define io_remap_pfn_range remap_pfn_range /* * All 32bit addresses are effectively valid for vmalloc... diff --git a/arch/blackfin/include/asm/portmux.h b/arch/blackfin/include/asm/portmux.h index 9b1e2c37b32..c8f0939419b 100644 --- a/arch/blackfin/include/asm/portmux.h +++ b/arch/blackfin/include/asm/portmux.h @@ -17,14 +17,27 @@ #define P_MAYSHARE 0x2000 #define P_DONTCARE 0x1000 +#ifdef CONFIG_PINCTRL +int bfin_internal_set_wake(unsigned int irq, unsigned int state); +#define gpio_pint_regs bfin_pint_regs +#define adi_internal_set_wake bfin_internal_set_wake + +#define peripheral_request(per, label) (0) +#define peripheral_free(per) +#define peripheral_request_list(per, label) (0) +#define peripheral_free_list(per) +#else int peripheral_request(unsigned short per, const char *label); void peripheral_free(unsigned short per); int peripheral_request_list(const unsigned short per[], const char *label); void peripheral_free_list(const unsigned short per[]); +#endif -#include <asm/gpio.h> +#include <linux/err.h> +#include <linux/pinctrl/pinctrl.h> #include <mach/portmux.h> +#include <mach/gpio.h> #ifndef P_SPORT2_TFS #define P_SPORT2_TFS P_UNDEF diff --git a/arch/blackfin/include/asm/processor.h b/arch/blackfin/include/asm/processor.h index 4ef7cfe43ce..d0e72e9475a 100644 --- a/arch/blackfin/include/asm/processor.h +++ b/arch/blackfin/include/asm/processor.h @@ -75,8 +75,6 @@ static inline void release_thread(struct task_struct *dead_task) { } -extern int kernel_thread(int (*fn) (void *), void *arg, unsigned long flags); - /* * Free current thread data structures etc.. */ diff --git a/arch/blackfin/include/asm/ptrace.h b/arch/blackfin/include/asm/ptrace.h index 10d8641180f..c00491594b4 100644 --- a/arch/blackfin/include/asm/ptrace.h +++ b/arch/blackfin/include/asm/ptrace.h @@ -3,102 +3,13 @@ * * Licensed under the GPL-2 or later. */ - #ifndef _BFIN_PTRACE_H #define _BFIN_PTRACE_H -/* - * GCC defines register number like this: - * ----------------------------- - * 0 - 7 are data registers R0-R7 - * 8 - 15 are address registers P0-P7 - * 16 - 31 dsp registers I/B/L0 -- I/B/L3 & M0--M3 - * 32 - 33 A registers A0 & A1 - * 34 - status register - * ----------------------------- - * - * We follows above, except: - * 32-33 --- Low 32-bit of A0&1 - * 34-35 --- High 8-bit of A0&1 - */ +#include <uapi/asm/ptrace.h> #ifndef __ASSEMBLY__ -struct task_struct; - -/* this struct defines the way the registers are stored on the - stack during a system call. */ - -struct pt_regs { - long orig_pc; - long ipend; - long seqstat; - long rete; - long retn; - long retx; - long pc; /* PC == RETI */ - long rets; - long reserved; /* Used as scratch during system calls */ - long astat; - long lb1; - long lb0; - long lt1; - long lt0; - long lc1; - long lc0; - long a1w; - long a1x; - long a0w; - long a0x; - long b3; - long b2; - long b1; - long b0; - long l3; - long l2; - long l1; - long l0; - long m3; - long m2; - long m1; - long m0; - long i3; - long i2; - long i1; - long i0; - long usp; - long fp; - long p5; - long p4; - long p3; - long p2; - long p1; - long p0; - long r7; - long r6; - long r5; - long r4; - long r3; - long r2; - long r1; - long r0; - long orig_r0; - long orig_p0; - long syscfg; -}; - -/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ -#define PTRACE_GETREGS 12 -#define PTRACE_SETREGS 13 /* ptrace signal */ - -#define PTRACE_GETFDPIC 31 /* get the ELF fdpic loadmap address */ -#define PTRACE_GETFDPIC_EXEC 0 /* [addr] request the executable loadmap */ -#define PTRACE_GETFDPIC_INTERP 1 /* [addr] request the interpreter loadmap */ - -#define PS_S (0x0002) - -#ifdef __KERNEL__ - /* user_mode returns true if only one bit is set in IPEND, other than the master interrupt enable. */ #define user_mode(regs) (!(((regs)->ipend & ~0x10) & (((regs)->ipend & ~0x10) - 1))) @@ -106,6 +17,7 @@ struct pt_regs { #define arch_has_single_step() (1) /* common code demands this function */ #define ptrace_disable(child) user_disable_single_step(child) +#define current_user_stack_pointer() rdusp() extern int is_user_addr_valid(struct task_struct *child, unsigned long start, unsigned long len); @@ -126,75 +38,5 @@ extern int is_user_addr_valid(struct task_struct *child, #include <asm-generic/ptrace.h> -#endif /* __KERNEL__ */ - #endif /* __ASSEMBLY__ */ - -/* - * Offsets used by 'ptrace' system call interface. - */ - -#define PT_R0 204 -#define PT_R1 200 -#define PT_R2 196 -#define PT_R3 192 -#define PT_R4 188 -#define PT_R5 184 -#define PT_R6 180 -#define PT_R7 176 -#define PT_P0 172 -#define PT_P1 168 -#define PT_P2 164 -#define PT_P3 160 -#define PT_P4 156 -#define PT_P5 152 -#define PT_FP 148 -#define PT_USP 144 -#define PT_I0 140 -#define PT_I1 136 -#define PT_I2 132 -#define PT_I3 128 -#define PT_M0 124 -#define PT_M1 120 -#define PT_M2 116 -#define PT_M3 112 -#define PT_L0 108 -#define PT_L1 104 -#define PT_L2 100 -#define PT_L3 96 -#define PT_B0 92 -#define PT_B1 88 -#define PT_B2 84 -#define PT_B3 80 -#define PT_A0X 76 -#define PT_A0W 72 -#define PT_A1X 68 -#define PT_A1W 64 -#define PT_LC0 60 -#define PT_LC1 56 -#define PT_LT0 52 -#define PT_LT1 48 -#define PT_LB0 44 -#define PT_LB1 40 -#define PT_ASTAT 36 -#define PT_RESERVED 32 -#define PT_RETS 28 -#define PT_PC 24 -#define PT_RETX 20 -#define PT_RETN 16 -#define PT_RETE 12 -#define PT_SEQSTAT 8 -#define PT_IPEND 4 - -#define PT_ORIG_R0 208 -#define PT_ORIG_P0 212 -#define PT_SYSCFG 216 -#define PT_TEXT_ADDR 220 -#define PT_TEXT_END_ADDR 224 -#define PT_DATA_ADDR 228 -#define PT_FDPIC_EXEC 232 -#define PT_FDPIC_INTERP 236 - -#define PT_LAST_PSEUDO PT_FDPIC_INTERP - #endif /* _BFIN_PTRACE_H */ diff --git a/arch/blackfin/include/asm/scb.h b/arch/blackfin/include/asm/scb.h new file mode 100644 index 00000000000..a294cc0d1a4 --- /dev/null +++ b/arch/blackfin/include/asm/scb.h @@ -0,0 +1,21 @@ +/* + * arch/blackfin/mach-common/scb-init.c - reprogram system cross bar priority + * + * Copyright 2012 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#define SCB_SLOT_OFFSET 24 +#define SCB_MI_MAX_SLOT 32 + +struct scb_mi_prio { + unsigned long scb_mi_arbr; + unsigned long scb_mi_arbw; + unsigned char scb_mi_slots; + unsigned char scb_mi_prio[SCB_MI_MAX_SLOT]; +}; + +extern struct scb_mi_prio scb_data[]; + +extern void init_scb(void); diff --git a/arch/blackfin/include/asm/signal.h b/arch/blackfin/include/asm/signal.h deleted file mode 100644 index 77a3bf37b69..00000000000 --- a/arch/blackfin/include/asm/signal.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _BLACKFIN_SIGNAL_H -#define _BLACKFIN_SIGNAL_H - -#define SA_RESTORER 0x04000000 -#include <asm-generic/signal.h> - -#endif diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h index 3894005337b..55f473bdad3 100644 --- a/arch/blackfin/include/asm/thread_info.h +++ b/arch/blackfin/include/asm/thread_info.h @@ -88,8 +88,6 @@ static inline struct thread_info *current_thread_info(void) #define TI_CPU 12 #define TI_PREEMPT 16 -#define PREEMPT_ACTIVE 0x4000000 - /* * thread information flag bit numbers */ diff --git a/arch/blackfin/include/asm/uaccess.h b/arch/blackfin/include/asm/uaccess.h index 5cc11150282..57701c3b8a5 100644 --- a/arch/blackfin/include/asm/uaccess.h +++ b/arch/blackfin/include/asm/uaccess.h @@ -34,23 +34,6 @@ static inline void set_fs(mm_segment_t fs) #define access_ok(type, addr, size) _access_ok((unsigned long)(addr), (size)) -static inline int is_in_rom(unsigned long addr) -{ - /* - * What we are really trying to do is determine if addr is - * in an allocated kernel memory region. If not then assume - * we cannot free it or otherwise de-allocate it. Ideally - * we could restrict this to really being in a ROM or flash, - * but that would need to be done on a board by board basis, - * not globally. - */ - if ((addr < _ramstart) || (addr >= _ramend)) - return (1); - - /* Default case, not in ROM */ - return (0); -} - /* * The fs value determines whether argument validity checking should be * performed or not. If get_fs() == USER_DS, checking is performed, with @@ -89,7 +72,7 @@ struct exception_table_entry { ({ \ int _err = 0; \ typeof(*(p)) _x = (x); \ - typeof(*(p)) *_p = (p); \ + typeof(*(p)) __user *_p = (p); \ if (!access_ok(VERIFY_WRITE, _p, sizeof(*(_p)))) {\ _err = -EFAULT; \ } \ @@ -108,8 +91,8 @@ struct exception_table_entry { long _xl, _xh; \ _xl = ((long *)&_x)[0]; \ _xh = ((long *)&_x)[1]; \ - __put_user_asm(_xl, ((long *)_p)+0, ); \ - __put_user_asm(_xh, ((long *)_p)+1, ); \ + __put_user_asm(_xl, ((long __user *)_p)+0, ); \ + __put_user_asm(_xh, ((long __user *)_p)+1, ); \ } break; \ default: \ _err = __put_user_bad(); \ @@ -136,7 +119,7 @@ static inline int bad_user_access_length(void) * aliasing issues. */ -#define __ptr(x) ((unsigned long *)(x)) +#define __ptr(x) ((unsigned long __force *)(x)) #define __put_user_asm(x,p,bhw) \ __asm__ (#bhw"[%1] = %0;\n\t" \ @@ -208,6 +191,7 @@ copy_to_user(void __user *to, const void *from, unsigned long n) memcpy((void __force *)to, from, n); else return n; + SSYNC(); return 0; } @@ -216,12 +200,12 @@ copy_to_user(void __user *to, const void *from, unsigned long n) */ static inline long __must_check -strncpy_from_user(char *dst, const char *src, long count) +strncpy_from_user(char *dst, const char __user *src, long count) { char *tmp; if (!access_ok(VERIFY_READ, src, 1)) return -EFAULT; - strncpy(dst, src, count); + strncpy(dst, (const char __force *)src, count); for (tmp = dst; *tmp && count > 0; tmp++, count--) ; return (tmp - dst); } @@ -237,18 +221,18 @@ strncpy_from_user(char *dst, const char *src, long count) * On exception, returns 0. * If the string is too long, returns a value greater than n. */ -static inline long __must_check strnlen_user(const char *src, long n) +static inline long __must_check strnlen_user(const char __user *src, long n) { if (!access_ok(VERIFY_READ, src, 1)) return 0; - return strnlen(src, n) + 1; + return strnlen((const char __force *)src, n) + 1; } -static inline long __must_check strlen_user(const char *src) +static inline long __must_check strlen_user(const char __user *src) { if (!access_ok(VERIFY_READ, src, 1)) return 0; - return strlen(src) + 1; + return strlen((const char __force *)src) + 1; } /* @@ -256,11 +240,11 @@ static inline long __must_check strlen_user(const char *src) */ static inline unsigned long __must_check -__clear_user(void *to, unsigned long n) +__clear_user(void __user *to, unsigned long n) { if (!access_ok(VERIFY_WRITE, to, n)) return n; - memset(to, 0, n); + memset((void __force *)to, 0, n); return 0; } diff --git a/arch/blackfin/include/asm/unistd.h b/arch/blackfin/include/asm/unistd.h index 5b2a0748d7d..c8c8ff9eff6 100644 --- a/arch/blackfin/include/asm/unistd.h +++ b/arch/blackfin/include/asm/unistd.h @@ -3,458 +3,20 @@ * * Licensed under the GPL-2 or later. */ - #ifndef __ASM_BFIN_UNISTD_H #define __ASM_BFIN_UNISTD_H -/* - * This file contains the system call numbers. - */ -#define __NR_restart_syscall 0 -#define __NR_exit 1 - /* 2 __NR_fork not supported on nommu */ -#define __NR_read 3 -#define __NR_write 4 -#define __NR_open 5 -#define __NR_close 6 - /* 7 __NR_waitpid obsolete */ -#define __NR_creat 8 -#define __NR_link 9 -#define __NR_unlink 10 -#define __NR_execve 11 -#define __NR_chdir 12 -#define __NR_time 13 -#define __NR_mknod 14 -#define __NR_chmod 15 -#define __NR_chown 16 - /* 17 __NR_break obsolete */ - /* 18 __NR_oldstat obsolete */ -#define __NR_lseek 19 -#define __NR_getpid 20 -#define __NR_mount 21 - /* 22 __NR_umount obsolete */ -#define __NR_setuid 23 -#define __NR_getuid 24 -#define __NR_stime 25 -#define __NR_ptrace 26 -#define __NR_alarm 27 - /* 28 __NR_oldfstat obsolete */ -#define __NR_pause 29 - /* 30 __NR_utime obsolete */ - /* 31 __NR_stty obsolete */ - /* 32 __NR_gtty obsolete */ -#define __NR_access 33 -#define __NR_nice 34 - /* 35 __NR_ftime obsolete */ -#define __NR_sync 36 -#define __NR_kill 37 -#define __NR_rename 38 -#define __NR_mkdir 39 -#define __NR_rmdir 40 -#define __NR_dup 41 -#define __NR_pipe 42 -#define __NR_times 43 - /* 44 __NR_prof obsolete */ -#define __NR_brk 45 -#define __NR_setgid 46 -#define __NR_getgid 47 - /* 48 __NR_signal obsolete */ -#define __NR_geteuid 49 -#define __NR_getegid 50 -#define __NR_acct 51 -#define __NR_umount2 52 - /* 53 __NR_lock obsolete */ -#define __NR_ioctl 54 -#define __NR_fcntl 55 - /* 56 __NR_mpx obsolete */ -#define __NR_setpgid 57 - /* 58 __NR_ulimit obsolete */ - /* 59 __NR_oldolduname obsolete */ -#define __NR_umask 60 -#define __NR_chroot 61 -#define __NR_ustat 62 -#define __NR_dup2 63 -#define __NR_getppid 64 -#define __NR_getpgrp 65 -#define __NR_setsid 66 - /* 67 __NR_sigaction obsolete */ -#define __NR_sgetmask 68 -#define __NR_ssetmask 69 -#define __NR_setreuid 70 -#define __NR_setregid 71 - /* 72 __NR_sigsuspend obsolete */ - /* 73 __NR_sigpending obsolete */ -#define __NR_sethostname 74 -#define __NR_setrlimit 75 - /* 76 __NR_old_getrlimit obsolete */ -#define __NR_getrusage 77 -#define __NR_gettimeofday 78 -#define __NR_settimeofday 79 -#define __NR_getgroups 80 -#define __NR_setgroups 81 - /* 82 __NR_select obsolete */ -#define __NR_symlink 83 - /* 84 __NR_oldlstat obsolete */ -#define __NR_readlink 85 - /* 86 __NR_uselib obsolete */ - /* 87 __NR_swapon obsolete */ -#define __NR_reboot 88 - /* 89 __NR_readdir obsolete */ - /* 90 __NR_mmap obsolete */ -#define __NR_munmap 91 -#define __NR_truncate 92 -#define __NR_ftruncate 93 -#define __NR_fchmod 94 -#define __NR_fchown 95 -#define __NR_getpriority 96 -#define __NR_setpriority 97 - /* 98 __NR_profil obsolete */ -#define __NR_statfs 99 -#define __NR_fstatfs 100 - /* 101 __NR_ioperm */ - /* 102 __NR_socketcall obsolete */ -#define __NR_syslog 103 -#define __NR_setitimer 104 -#define __NR_getitimer 105 -#define __NR_stat 106 -#define __NR_lstat 107 -#define __NR_fstat 108 - /* 109 __NR_olduname obsolete */ - /* 110 __NR_iopl obsolete */ -#define __NR_vhangup 111 - /* 112 __NR_idle obsolete */ - /* 113 __NR_vm86old */ -#define __NR_wait4 114 - /* 115 __NR_swapoff obsolete */ -#define __NR_sysinfo 116 - /* 117 __NR_ipc oboslete */ -#define __NR_fsync 118 - /* 119 __NR_sigreturn obsolete */ -#define __NR_clone 120 -#define __NR_setdomainname 121 -#define __NR_uname 122 - /* 123 __NR_modify_ldt obsolete */ -#define __NR_adjtimex 124 -#define __NR_mprotect 125 - /* 126 __NR_sigprocmask obsolete */ - /* 127 __NR_create_module obsolete */ -#define __NR_init_module 128 -#define __NR_delete_module 129 - /* 130 __NR_get_kernel_syms obsolete */ -#define __NR_quotactl 131 -#define __NR_getpgid 132 -#define __NR_fchdir 133 -#define __NR_bdflush 134 - /* 135 was sysfs */ -#define __NR_personality 136 - /* 137 __NR_afs_syscall */ -#define __NR_setfsuid 138 -#define __NR_setfsgid 139 -#define __NR__llseek 140 -#define __NR_getdents 141 - /* 142 __NR__newselect obsolete */ -#define __NR_flock 143 - /* 144 __NR_msync obsolete */ -#define __NR_readv 145 -#define __NR_writev 146 -#define __NR_getsid 147 -#define __NR_fdatasync 148 -#define __NR__sysctl 149 - /* 150 __NR_mlock */ - /* 151 __NR_munlock */ - /* 152 __NR_mlockall */ - /* 153 __NR_munlockall */ -#define __NR_sched_setparam 154 -#define __NR_sched_getparam 155 -#define __NR_sched_setscheduler 156 -#define __NR_sched_getscheduler 157 -#define __NR_sched_yield 158 -#define __NR_sched_get_priority_max 159 -#define __NR_sched_get_priority_min 160 -#define __NR_sched_rr_get_interval 161 -#define __NR_nanosleep 162 -#define __NR_mremap 163 -#define __NR_setresuid 164 -#define __NR_getresuid 165 - /* 166 __NR_vm86 */ - /* 167 __NR_query_module */ - /* 168 __NR_poll */ -#define __NR_nfsservctl 169 -#define __NR_setresgid 170 -#define __NR_getresgid 171 -#define __NR_prctl 172 -#define __NR_rt_sigreturn 173 -#define __NR_rt_sigaction 174 -#define __NR_rt_sigprocmask 175 -#define __NR_rt_sigpending 176 -#define __NR_rt_sigtimedwait 177 -#define __NR_rt_sigqueueinfo 178 -#define __NR_rt_sigsuspend 179 -#define __NR_pread 180 -#define __NR_pwrite 181 -#define __NR_lchown 182 -#define __NR_getcwd 183 -#define __NR_capget 184 -#define __NR_capset 185 -#define __NR_sigaltstack 186 -#define __NR_sendfile 187 - /* 188 __NR_getpmsg */ - /* 189 __NR_putpmsg */ -#define __NR_vfork 190 -#define __NR_getrlimit 191 -#define __NR_mmap2 192 -#define __NR_truncate64 193 -#define __NR_ftruncate64 194 -#define __NR_stat64 195 -#define __NR_lstat64 196 -#define __NR_fstat64 197 -#define __NR_chown32 198 -#define __NR_getuid32 199 -#define __NR_getgid32 200 -#define __NR_geteuid32 201 -#define __NR_getegid32 202 -#define __NR_setreuid32 203 -#define __NR_setregid32 204 -#define __NR_getgroups32 205 -#define __NR_setgroups32 206 -#define __NR_fchown32 207 -#define __NR_setresuid32 208 -#define __NR_getresuid32 209 -#define __NR_setresgid32 210 -#define __NR_getresgid32 211 -#define __NR_lchown32 212 -#define __NR_setuid32 213 -#define __NR_setgid32 214 -#define __NR_setfsuid32 215 -#define __NR_setfsgid32 216 -#define __NR_pivot_root 217 - /* 218 __NR_mincore */ - /* 219 __NR_madvise */ -#define __NR_getdents64 220 -#define __NR_fcntl64 221 - /* 222 reserved for TUX */ - /* 223 reserved for TUX */ -#define __NR_gettid 224 -#define __NR_readahead 225 -#define __NR_setxattr 226 -#define __NR_lsetxattr 227 -#define __NR_fsetxattr 228 -#define __NR_getxattr 229 -#define __NR_lgetxattr 230 -#define __NR_fgetxattr 231 -#define __NR_listxattr 232 -#define __NR_llistxattr 233 -#define __NR_flistxattr 234 -#define __NR_removexattr 235 -#define __NR_lremovexattr 236 -#define __NR_fremovexattr 237 -#define __NR_tkill 238 -#define __NR_sendfile64 239 -#define __NR_futex 240 -#define __NR_sched_setaffinity 241 -#define __NR_sched_getaffinity 242 - /* 243 __NR_set_thread_area */ - /* 244 __NR_get_thread_area */ -#define __NR_io_setup 245 -#define __NR_io_destroy 246 -#define __NR_io_getevents 247 -#define __NR_io_submit 248 -#define __NR_io_cancel 249 - /* 250 __NR_alloc_hugepages */ - /* 251 __NR_free_hugepages */ -#define __NR_exit_group 252 -#define __NR_lookup_dcookie 253 -#define __NR_bfin_spinlock 254 - -#define __NR_epoll_create 255 -#define __NR_epoll_ctl 256 -#define __NR_epoll_wait 257 - /* 258 __NR_remap_file_pages */ -#define __NR_set_tid_address 259 -#define __NR_timer_create 260 -#define __NR_timer_settime 261 -#define __NR_timer_gettime 262 -#define __NR_timer_getoverrun 263 -#define __NR_timer_delete 264 -#define __NR_clock_settime 265 -#define __NR_clock_gettime 266 -#define __NR_clock_getres 267 -#define __NR_clock_nanosleep 268 -#define __NR_statfs64 269 -#define __NR_fstatfs64 270 -#define __NR_tgkill 271 -#define __NR_utimes 272 -#define __NR_fadvise64_64 273 - /* 274 __NR_vserver */ - /* 275 __NR_mbind */ - /* 276 __NR_get_mempolicy */ - /* 277 __NR_set_mempolicy */ -#define __NR_mq_open 278 -#define __NR_mq_unlink 279 -#define __NR_mq_timedsend 280 -#define __NR_mq_timedreceive 281 -#define __NR_mq_notify 282 -#define __NR_mq_getsetattr 283 -#define __NR_kexec_load 284 -#define __NR_waitid 285 -#define __NR_add_key 286 -#define __NR_request_key 287 -#define __NR_keyctl 288 -#define __NR_ioprio_set 289 -#define __NR_ioprio_get 290 -#define __NR_inotify_init 291 -#define __NR_inotify_add_watch 292 -#define __NR_inotify_rm_watch 293 - /* 294 __NR_migrate_pages */ -#define __NR_openat 295 -#define __NR_mkdirat 296 -#define __NR_mknodat 297 -#define __NR_fchownat 298 -#define __NR_futimesat 299 -#define __NR_fstatat64 300 -#define __NR_unlinkat 301 -#define __NR_renameat 302 -#define __NR_linkat 303 -#define __NR_symlinkat 304 -#define __NR_readlinkat 305 -#define __NR_fchmodat 306 -#define __NR_faccessat 307 -#define __NR_pselect6 308 -#define __NR_ppoll 309 -#define __NR_unshare 310 - -/* Blackfin private syscalls */ -#define __NR_sram_alloc 311 -#define __NR_sram_free 312 -#define __NR_dma_memcpy 313 - -/* socket syscalls */ -#define __NR_accept 314 -#define __NR_bind 315 -#define __NR_connect 316 -#define __NR_getpeername 317 -#define __NR_getsockname 318 -#define __NR_getsockopt 319 -#define __NR_listen 320 -#define __NR_recv 321 -#define __NR_recvfrom 322 -#define __NR_recvmsg 323 -#define __NR_send 324 -#define __NR_sendmsg 325 -#define __NR_sendto 326 -#define __NR_setsockopt 327 -#define __NR_shutdown 328 -#define __NR_socket 329 -#define __NR_socketpair 330 - -/* sysv ipc syscalls */ -#define __NR_semctl 331 -#define __NR_semget 332 -#define __NR_semop 333 -#define __NR_msgctl 334 -#define __NR_msgget 335 -#define __NR_msgrcv 336 -#define __NR_msgsnd 337 -#define __NR_shmat 338 -#define __NR_shmctl 339 -#define __NR_shmdt 340 -#define __NR_shmget 341 - -#define __NR_splice 342 -#define __NR_sync_file_range 343 -#define __NR_tee 344 -#define __NR_vmsplice 345 - -#define __NR_epoll_pwait 346 -#define __NR_utimensat 347 -#define __NR_signalfd 348 -#define __NR_timerfd_create 349 -#define __NR_eventfd 350 -#define __NR_pread64 351 -#define __NR_pwrite64 352 -#define __NR_fadvise64 353 -#define __NR_set_robust_list 354 -#define __NR_get_robust_list 355 -#define __NR_fallocate 356 -#define __NR_semtimedop 357 -#define __NR_timerfd_settime 358 -#define __NR_timerfd_gettime 359 -#define __NR_signalfd4 360 -#define __NR_eventfd2 361 -#define __NR_epoll_create1 362 -#define __NR_dup3 363 -#define __NR_pipe2 364 -#define __NR_inotify_init1 365 -#define __NR_preadv 366 -#define __NR_pwritev 367 -#define __NR_rt_tgsigqueueinfo 368 -#define __NR_perf_event_open 369 -#define __NR_recvmmsg 370 -#define __NR_fanotify_init 371 -#define __NR_fanotify_mark 372 -#define __NR_prlimit64 373 -#define __NR_cacheflush 374 -#define __NR_name_to_handle_at 375 -#define __NR_open_by_handle_at 376 -#define __NR_clock_adjtime 377 -#define __NR_syncfs 378 -#define __NR_setns 379 -#define __NR_sendmmsg 380 -#define __NR_process_vm_readv 381 -#define __NR_process_vm_writev 382 -#define __NR_syscall 383 -#define NR_syscalls __NR_syscall +#include <uapi/asm/unistd.h> -/* Old optional stuff no one actually uses */ -#define __IGNORE_sysfs -#define __IGNORE_uselib - -/* Implement the newer interfaces */ -#define __IGNORE_mmap -#define __IGNORE_poll -#define __IGNORE_select -#define __IGNORE_utime - -/* Not relevant on no-mmu */ -#define __IGNORE_swapon -#define __IGNORE_swapoff -#define __IGNORE_msync -#define __IGNORE_mlock -#define __IGNORE_munlock -#define __IGNORE_mlockall -#define __IGNORE_munlockall -#define __IGNORE_mincore -#define __IGNORE_madvise -#define __IGNORE_remap_file_pages -#define __IGNORE_mbind -#define __IGNORE_get_mempolicy -#define __IGNORE_set_mempolicy -#define __IGNORE_migrate_pages -#define __IGNORE_move_pages -#define __IGNORE_getcpu - -#ifdef __KERNEL__ #define __ARCH_WANT_STAT64 #define __ARCH_WANT_SYS_ALARM #define __ARCH_WANT_SYS_GETHOSTNAME #define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_SGETMASK #define __ARCH_WANT_SYS_TIME #define __ARCH_WANT_SYS_FADVISE64 #define __ARCH_WANT_SYS_GETPGRP #define __ARCH_WANT_SYS_LLSEEK #define __ARCH_WANT_SYS_NICE -#define __ARCH_WANT_SYS_RT_SIGACTION -#define __ARCH_WANT_SYS_RT_SIGSUSPEND - -/* - * "Conditional" syscalls - * - * What we want is __attribute__((weak,alias("sys_ni_syscall"))), - * but it doesn't work on all toolchains, so we just do it by hand - */ -#define cond_syscall(x) asm(".weak\t_" #x "\n\t.set\t_" #x ",_sys_ni_syscall"); - -#endif /* __KERNEL__ */ +#define __ARCH_WANT_SYS_VFORK #endif /* __ASM_BFIN_UNISTD_H */ diff --git a/arch/blackfin/include/mach-common/irq.h b/arch/blackfin/include/mach-common/irq.h index cab14e911dc..af9fc8171eb 100644 --- a/arch/blackfin/include/mach-common/irq.h +++ b/arch/blackfin/include/mach-common/irq.h @@ -40,8 +40,6 @@ #define IRQ_HWERR 5 /* Hardware Error */ #define IRQ_CORETMR 6 /* Core timer */ -#define BFIN_IRQ(x) ((x) + 7) - #define IVG7 7 #define IVG8 8 #define IVG9 9 @@ -52,6 +50,9 @@ #define IVG14 14 #define IVG15 15 +#define BFIN_IRQ(x) ((x) + IVG7) +#define BFIN_SYSIRQ(x) ((x) - IVG7) + #define NR_IRQS (NR_MACH_IRQS + NR_SPARE_IRQS) #endif diff --git a/arch/blackfin/include/uapi/asm/Kbuild b/arch/blackfin/include/uapi/asm/Kbuild index baebb3da1d4..0bd28f77abc 100644 --- a/arch/blackfin/include/uapi/asm/Kbuild +++ b/arch/blackfin/include/uapi/asm/Kbuild @@ -1,3 +1,19 @@ # UAPI Header export list include include/uapi/asm-generic/Kbuild.asm +header-y += bfin_sport.h +header-y += byteorder.h +header-y += cachectl.h +header-y += fcntl.h +header-y += fixed_code.h +header-y += ioctls.h +header-y += kvm_para.h +header-y += poll.h +header-y += posix_types.h +header-y += ptrace.h +header-y += sigcontext.h +header-y += siginfo.h +header-y += signal.h +header-y += stat.h +header-y += swab.h +header-y += unistd.h diff --git a/arch/blackfin/include/uapi/asm/bfin_sport.h b/arch/blackfin/include/uapi/asm/bfin_sport.h new file mode 100644 index 00000000000..c086de87ee6 --- /dev/null +++ b/arch/blackfin/include/uapi/asm/bfin_sport.h @@ -0,0 +1,136 @@ +/* + * bfin_sport.h - interface to Blackfin SPORTs + * + * Copyright 2004-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _UAPI__BFIN_SPORT_H__ +#define _UAPI__BFIN_SPORT_H__ + +/* Sport mode: it can be set to TDM, i2s or others */ +#define NORM_MODE 0x0 +#define TDM_MODE 0x1 +#define I2S_MODE 0x2 +#define NDSO_MODE 0x3 + +/* Data format, normal, a-law or u-law */ +#define NORM_FORMAT 0x0 +#define ALAW_FORMAT 0x2 +#define ULAW_FORMAT 0x3 + +/* Function driver which use sport must initialize the structure */ +struct sport_config { + /* TDM (multichannels), I2S or other mode */ + unsigned int mode:3; + unsigned int polled; /* use poll instead of irq when set */ + + /* if TDM mode is selected, channels must be set */ + int channels; /* Must be in 8 units */ + unsigned int frame_delay:4; /* Delay between frame sync pulse and first bit */ + + /* I2S mode */ + unsigned int right_first:1; /* Right stereo channel first */ + + /* In mormal mode, the following item need to be set */ + unsigned int lsb_first:1; /* order of transmit or receive data */ + unsigned int fsync:1; /* Frame sync required */ + unsigned int data_indep:1; /* data independent frame sync generated */ + unsigned int act_low:1; /* Active low TFS */ + unsigned int late_fsync:1; /* Late frame sync */ + unsigned int tckfe:1; + unsigned int sec_en:1; /* Secondary side enabled */ + + /* Choose clock source */ + unsigned int int_clk:1; /* Internal or external clock */ + + /* If external clock is used, the following fields are ignored */ + int serial_clk; + int fsync_clk; + + unsigned int data_format:2; /* Normal, u-law or a-law */ + + int word_len; /* How length of the word in bits, 3-32 bits */ + int dma_enabled; +}; + +/* Userspace interface */ +#define SPORT_IOC_MAGIC 'P' +#define SPORT_IOC_CONFIG _IOWR('P', 0x01, struct sport_config) +#define SPORT_IOC_GET_SYSTEMCLOCK _IOR('P', 0x02, unsigned long) +#define SPORT_IOC_SET_BAUDRATE _IOW('P', 0x03, unsigned long) + + +/* SPORT_TCR1 Masks */ +#define TSPEN 0x0001 /* TX enable */ +#define ITCLK 0x0002 /* Internal TX Clock Select */ +#define TDTYPE 0x000C /* TX Data Formatting Select */ +#define DTYPE_NORM 0x0000 /* Data Format Normal */ +#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ +#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ +#define TLSBIT 0x0010 /* TX Bit Order */ +#define ITFS 0x0200 /* Internal TX Frame Sync Select */ +#define TFSR 0x0400 /* TX Frame Sync Required Select */ +#define DITFS 0x0800 /* Data Independent TX Frame Sync Select */ +#define LTFS 0x1000 /* Low TX Frame Sync Select */ +#define LATFS 0x2000 /* Late TX Frame Sync Select */ +#define TCKFE 0x4000 /* TX Clock Falling Edge Select */ + +/* SPORT_TCR2 Masks */ +#define SLEN 0x001F /* SPORT TX Word Length (2 - 31) */ +#define DP_SLEN(x) BFIN_DEPOSIT(SLEN, x) +#define EX_SLEN(x) BFIN_EXTRACT(SLEN, x) +#define TXSE 0x0100 /* TX Secondary Enable */ +#define TSFSE 0x0200 /* TX Stereo Frame Sync Enable */ +#define TRFST 0x0400 /* TX Right-First Data Order */ + +/* SPORT_RCR1 Masks */ +#define RSPEN 0x0001 /* RX enable */ +#define IRCLK 0x0002 /* Internal RX Clock Select */ +#define RDTYPE 0x000C /* RX Data Formatting Select */ +/* DTYPE_* defined above */ +#define RLSBIT 0x0010 /* RX Bit Order */ +#define IRFS 0x0200 /* Internal RX Frame Sync Select */ +#define RFSR 0x0400 /* RX Frame Sync Required Select */ +#define LRFS 0x1000 /* Low RX Frame Sync Select */ +#define LARFS 0x2000 /* Late RX Frame Sync Select */ +#define RCKFE 0x4000 /* RX Clock Falling Edge Select */ + +/* SPORT_RCR2 Masks */ +/* SLEN defined above */ +#define RXSE 0x0100 /* RX Secondary Enable */ +#define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */ +#define RRFST 0x0400 /* Right-First Data Order */ + +/* SPORT_STAT Masks */ +#define RXNE 0x0001 /* RX FIFO Not Empty Status */ +#define RUVF 0x0002 /* RX Underflow Status */ +#define ROVF 0x0004 /* RX Overflow Status */ +#define TXF 0x0008 /* TX FIFO Full Status */ +#define TUVF 0x0010 /* TX Underflow Status */ +#define TOVF 0x0020 /* TX Overflow Status */ +#define TXHRE 0x0040 /* TX Hold Register Empty */ + +/* SPORT_MCMC1 Masks */ +#define SP_WOFF 0x03FF /* Multichannel Window Offset Field */ +#define DP_SP_WOFF(x) BFIN_DEPOSIT(SP_WOFF, x) +#define EX_SP_WOFF(x) BFIN_EXTRACT(SP_WOFF, x) +#define SP_WSIZE 0xF000 /* Multichannel Window Size Field */ +#define DP_SP_WSIZE(x) BFIN_DEPOSIT(SP_WSIZE, x) +#define EX_SP_WSIZE(x) BFIN_EXTRACT(SP_WSIZE, x) + +/* SPORT_MCMC2 Masks */ +#define MCCRM 0x0003 /* Multichannel Clock Recovery Mode */ +#define REC_BYPASS 0x0000 /* Bypass Mode (No Clock Recovery) */ +#define REC_2FROM4 0x0002 /* Recover 2 MHz Clock from 4 MHz Clock */ +#define REC_8FROM16 0x0003 /* Recover 8 MHz Clock from 16 MHz Clock */ +#define MCDTXPE 0x0004 /* Multichannel DMA Transmit Packing */ +#define MCDRXPE 0x0008 /* Multichannel DMA Receive Packing */ +#define MCMEN 0x0010 /* Multichannel Frame Mode Enable */ +#define FSDR 0x0080 /* Multichannel Frame Sync to Data Relationship */ +#define MFD 0xF000 /* Multichannel Frame Delay */ +#define DP_MFD(x) BFIN_DEPOSIT(MFD, x) +#define EX_MFD(x) BFIN_EXTRACT(MFD, x) + +#endif /* _UAPI__BFIN_SPORT_H__ */ diff --git a/arch/blackfin/include/uapi/asm/byteorder.h b/arch/blackfin/include/uapi/asm/byteorder.h new file mode 100644 index 00000000000..3b125da5dcb --- /dev/null +++ b/arch/blackfin/include/uapi/asm/byteorder.h @@ -0,0 +1,6 @@ +#ifndef _UAPI__BFIN_ASM_BYTEORDER_H +#define _UAPI__BFIN_ASM_BYTEORDER_H + +#include <linux/byteorder/little_endian.h> + +#endif /* _UAPI__BFIN_ASM_BYTEORDER_H */ diff --git a/arch/blackfin/include/asm/cachectl.h b/arch/blackfin/include/uapi/asm/cachectl.h index 03255df6c1e..4fdab75dee1 100644 --- a/arch/blackfin/include/asm/cachectl.h +++ b/arch/blackfin/include/uapi/asm/cachectl.h @@ -7,8 +7,8 @@ * Licensed under the GPL-2 or later. */ -#ifndef _ASM_CACHECTL -#define _ASM_CACHECTL +#ifndef _UAPI_ASM_CACHECTL +#define _UAPI_ASM_CACHECTL /* * Options for cacheflush system call @@ -17,4 +17,4 @@ #define DCACHE (1<<1) /* writeback and flush data cache */ #define BCACHE (ICACHE|DCACHE) /* flush both caches */ -#endif /* _ASM_CACHECTL */ +#endif /* _UAPI_ASM_CACHECTL */ diff --git a/arch/blackfin/include/asm/fcntl.h b/arch/blackfin/include/uapi/asm/fcntl.h index 251c911d59c..f51ad9a4f61 100644 --- a/arch/blackfin/include/asm/fcntl.h +++ b/arch/blackfin/include/uapi/asm/fcntl.h @@ -4,8 +4,8 @@ * Licensed under the GPL-2 or later. */ -#ifndef _BFIN_FCNTL_H -#define _BFIN_FCNTL_H +#ifndef _UAPI_BFIN_FCNTL_H +#define _UAPI_BFIN_FCNTL_H #define O_DIRECTORY 040000 /* must be a directory */ #define O_NOFOLLOW 0100000 /* don't follow links */ @@ -14,4 +14,4 @@ #include <asm-generic/fcntl.h> -#endif +#endif /* _UAPI_BFIN_FCNTL_H */ diff --git a/arch/blackfin/include/uapi/asm/fixed_code.h b/arch/blackfin/include/uapi/asm/fixed_code.h new file mode 100644 index 00000000000..3bef1dca379 --- /dev/null +++ b/arch/blackfin/include/uapi/asm/fixed_code.h @@ -0,0 +1,38 @@ +/* + * This file defines the fixed addresses where userspace programs + * can find atomic code sequences. + * + * Copyright 2007-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _UAPI__BFIN_ASM_FIXED_CODE_H__ +#define _UAPI__BFIN_ASM_FIXED_CODE_H__ + + +#ifndef CONFIG_PHY_RAM_BASE_ADDRESS +#define CONFIG_PHY_RAM_BASE_ADDRESS 0x0 +#endif + +#define FIXED_CODE_START (CONFIG_PHY_RAM_BASE_ADDRESS + 0x400) + +#define SIGRETURN_STUB (CONFIG_PHY_RAM_BASE_ADDRESS + 0x400) + +#define ATOMIC_SEQS_START (CONFIG_PHY_RAM_BASE_ADDRESS + 0x410) + +#define ATOMIC_XCHG32 (CONFIG_PHY_RAM_BASE_ADDRESS + 0x410) +#define ATOMIC_CAS32 (CONFIG_PHY_RAM_BASE_ADDRESS + 0x420) +#define ATOMIC_ADD32 (CONFIG_PHY_RAM_BASE_ADDRESS + 0x430) +#define ATOMIC_SUB32 (CONFIG_PHY_RAM_BASE_ADDRESS + 0x440) +#define ATOMIC_IOR32 (CONFIG_PHY_RAM_BASE_ADDRESS + 0x450) +#define ATOMIC_AND32 (CONFIG_PHY_RAM_BASE_ADDRESS + 0x460) +#define ATOMIC_XOR32 (CONFIG_PHY_RAM_BASE_ADDRESS + 0x470) + +#define ATOMIC_SEQS_END (CONFIG_PHY_RAM_BASE_ADDRESS + 0x480) + +#define SAFE_USER_INSTRUCTION (CONFIG_PHY_RAM_BASE_ADDRESS + 0x480) + +#define FIXED_CODE_END (CONFIG_PHY_RAM_BASE_ADDRESS + 0x490) + +#endif /* _UAPI__BFIN_ASM_FIXED_CODE_H__ */ diff --git a/arch/blackfin/include/uapi/asm/ioctls.h b/arch/blackfin/include/uapi/asm/ioctls.h new file mode 100644 index 00000000000..9a41c20fc83 --- /dev/null +++ b/arch/blackfin/include/uapi/asm/ioctls.h @@ -0,0 +1,7 @@ +#ifndef _UAPI__ARCH_BFIN_IOCTLS_H__ +#define _UAPI__ARCH_BFIN_IOCTLS_H__ + +#define FIOQSIZE 0x545E +#include <asm-generic/ioctls.h> + +#endif /* _UAPI__ARCH_BFIN_IOCTLS_H__ */ diff --git a/arch/blackfin/include/asm/poll.h b/arch/blackfin/include/uapi/asm/poll.h index 072d8966c5c..99c7d6816da 100644 --- a/arch/blackfin/include/asm/poll.h +++ b/arch/blackfin/include/uapi/asm/poll.h @@ -5,12 +5,12 @@ * */ -#ifndef __BFIN_POLL_H -#define __BFIN_POLL_H +#ifndef _UAPI__BFIN_POLL_H +#define _UAPI__BFIN_POLL_H #define POLLWRNORM 4 /* POLLOUT */ #define POLLWRBAND 256 #include <asm-generic/poll.h> -#endif +#endif /* _UAPI__BFIN_POLL_H */ diff --git a/arch/blackfin/include/asm/posix_types.h b/arch/blackfin/include/uapi/asm/posix_types.h index 1bd3436db6a..9608ef64dc4 100644 --- a/arch/blackfin/include/asm/posix_types.h +++ b/arch/blackfin/include/uapi/asm/posix_types.h @@ -4,8 +4,8 @@ * Licensed under the GPL-2 or later. */ -#ifndef __ARCH_BFIN_POSIX_TYPES_H -#define __ARCH_BFIN_POSIX_TYPES_H +#ifndef _UAPI__ARCH_BFIN_POSIX_TYPES_H +#define _UAPI__ARCH_BFIN_POSIX_TYPES_H typedef unsigned short __kernel_mode_t; #define __kernel_mode_t __kernel_mode_t @@ -27,4 +27,4 @@ typedef unsigned short __kernel_old_dev_t; #include <asm-generic/posix_types.h> -#endif +#endif /* _UAPI__ARCH_BFIN_POSIX_TYPES_H */ diff --git a/arch/blackfin/include/uapi/asm/ptrace.h b/arch/blackfin/include/uapi/asm/ptrace.h new file mode 100644 index 00000000000..fd48bd0739d --- /dev/null +++ b/arch/blackfin/include/uapi/asm/ptrace.h @@ -0,0 +1,170 @@ +/* + * Copyright 2004-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _UAPI_BFIN_PTRACE_H +#define _UAPI_BFIN_PTRACE_H + +/* + * GCC defines register number like this: + * ----------------------------- + * 0 - 7 are data registers R0-R7 + * 8 - 15 are address registers P0-P7 + * 16 - 31 dsp registers I/B/L0 -- I/B/L3 & M0--M3 + * 32 - 33 A registers A0 & A1 + * 34 - status register + * ----------------------------- + * + * We follows above, except: + * 32-33 --- Low 32-bit of A0&1 + * 34-35 --- High 8-bit of A0&1 + */ + +#ifndef __ASSEMBLY__ + +struct task_struct; + +/* this struct defines the way the registers are stored on the + stack during a system call. */ + +struct pt_regs { + long orig_pc; + long ipend; + long seqstat; + long rete; + long retn; + long retx; + long pc; /* PC == RETI */ + long rets; + long reserved; /* Used as scratch during system calls */ + long astat; + long lb1; + long lb0; + long lt1; + long lt0; + long lc1; + long lc0; + long a1w; + long a1x; + long a0w; + long a0x; + long b3; + long b2; + long b1; + long b0; + long l3; + long l2; + long l1; + long l0; + long m3; + long m2; + long m1; + long m0; + long i3; + long i2; + long i1; + long i0; + long usp; + long fp; + long p5; + long p4; + long p3; + long p2; + long p1; + long p0; + long r7; + long r6; + long r5; + long r4; + long r3; + long r2; + long r1; + long r0; + long orig_r0; + long orig_p0; + long syscfg; +}; + +/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 /* ptrace signal */ + +#define PTRACE_GETFDPIC 31 /* get the ELF fdpic loadmap address */ +#define PTRACE_GETFDPIC_EXEC 0 /* [addr] request the executable loadmap */ +#define PTRACE_GETFDPIC_INTERP 1 /* [addr] request the interpreter loadmap */ + +#define PS_S (0x0002) + + +#endif /* __ASSEMBLY__ */ + +/* + * Offsets used by 'ptrace' system call interface. + */ + +#define PT_R0 204 +#define PT_R1 200 +#define PT_R2 196 +#define PT_R3 192 +#define PT_R4 188 +#define PT_R5 184 +#define PT_R6 180 +#define PT_R7 176 +#define PT_P0 172 +#define PT_P1 168 +#define PT_P2 164 +#define PT_P3 160 +#define PT_P4 156 +#define PT_P5 152 +#define PT_FP 148 +#define PT_USP 144 +#define PT_I0 140 +#define PT_I1 136 +#define PT_I2 132 +#define PT_I3 128 +#define PT_M0 124 +#define PT_M1 120 +#define PT_M2 116 +#define PT_M3 112 +#define PT_L0 108 +#define PT_L1 104 +#define PT_L2 100 +#define PT_L3 96 +#define PT_B0 92 +#define PT_B1 88 +#define PT_B2 84 +#define PT_B3 80 +#define PT_A0X 76 +#define PT_A0W 72 +#define PT_A1X 68 +#define PT_A1W 64 +#define PT_LC0 60 +#define PT_LC1 56 +#define PT_LT0 52 +#define PT_LT1 48 +#define PT_LB0 44 +#define PT_LB1 40 +#define PT_ASTAT 36 +#define PT_RESERVED 32 +#define PT_RETS 28 +#define PT_PC 24 +#define PT_RETX 20 +#define PT_RETN 16 +#define PT_RETE 12 +#define PT_SEQSTAT 8 +#define PT_IPEND 4 + +#define PT_ORIG_R0 208 +#define PT_ORIG_P0 212 +#define PT_SYSCFG 216 +#define PT_TEXT_ADDR 220 +#define PT_TEXT_END_ADDR 224 +#define PT_DATA_ADDR 228 +#define PT_FDPIC_EXEC 232 +#define PT_FDPIC_INTERP 236 + +#define PT_LAST_PSEUDO PT_FDPIC_INTERP + +#endif /* _UAPI_BFIN_PTRACE_H */ diff --git a/arch/blackfin/include/asm/sigcontext.h b/arch/blackfin/include/uapi/asm/sigcontext.h index 906bdc1f5fd..b58f12dc27b 100644 --- a/arch/blackfin/include/asm/sigcontext.h +++ b/arch/blackfin/include/uapi/asm/sigcontext.h @@ -4,8 +4,8 @@ * Licensed under the GPL-2 or later. */ -#ifndef _ASM_BLACKFIN_SIGCONTEXT_H -#define _ASM_BLACKFIN_SIGCONTEXT_H +#ifndef _UAPI_ASM_BLACKFIN_SIGCONTEXT_H +#define _UAPI_ASM_BLACKFIN_SIGCONTEXT_H /* Add new entries at the end of the structure only. */ struct sigcontext { @@ -58,4 +58,4 @@ struct sigcontext { unsigned long sc_seqstat; }; -#endif +#endif /* _UAPI_ASM_BLACKFIN_SIGCONTEXT_H */ diff --git a/arch/blackfin/include/asm/siginfo.h b/arch/blackfin/include/uapi/asm/siginfo.h index 3e81306394e..c72f4e6e386 100644 --- a/arch/blackfin/include/asm/siginfo.h +++ b/arch/blackfin/include/uapi/asm/siginfo.h @@ -4,8 +4,8 @@ * Licensed under the GPL-2 or later. */ -#ifndef _BFIN_SIGINFO_H -#define _BFIN_SIGINFO_H +#ifndef _UAPI_BFIN_SIGINFO_H +#define _UAPI_BFIN_SIGINFO_H #include <linux/types.h> #include <asm-generic/siginfo.h> @@ -38,4 +38,4 @@ */ #define SEGV_STACKFLOW (__SI_FAULT|3) /* stack overflow */ -#endif +#endif /* _UAPI_BFIN_SIGINFO_H */ diff --git a/arch/blackfin/include/uapi/asm/signal.h b/arch/blackfin/include/uapi/asm/signal.h new file mode 100644 index 00000000000..f0a0d8b6663 --- /dev/null +++ b/arch/blackfin/include/uapi/asm/signal.h @@ -0,0 +1,7 @@ +#ifndef _UAPI_BLACKFIN_SIGNAL_H +#define _UAPI_BLACKFIN_SIGNAL_H + +#define SA_RESTORER 0x04000000 +#include <asm-generic/signal.h> + +#endif /* _UAPI_BLACKFIN_SIGNAL_H */ diff --git a/arch/blackfin/include/asm/stat.h b/arch/blackfin/include/uapi/asm/stat.h index 2e27665c4e9..d3068a750b9 100644 --- a/arch/blackfin/include/asm/stat.h +++ b/arch/blackfin/include/uapi/asm/stat.h @@ -4,8 +4,8 @@ * Licensed under the GPL-2. */ -#ifndef _BFIN_STAT_H -#define _BFIN_STAT_H +#ifndef _UAPI_BFIN_STAT_H +#define _UAPI_BFIN_STAT_H struct stat { unsigned short st_dev; @@ -66,4 +66,4 @@ struct stat64 { unsigned long long st_ino; }; -#endif /* _BFIN_STAT_H */ +#endif /* _UAPI_BFIN_STAT_H */ diff --git a/arch/blackfin/include/asm/swab.h b/arch/blackfin/include/uapi/asm/swab.h index 89de6507ca2..f5626b77684 100644 --- a/arch/blackfin/include/asm/swab.h +++ b/arch/blackfin/include/uapi/asm/swab.h @@ -4,8 +4,8 @@ * Licensed under the GPL-2 or later. */ -#ifndef _BLACKFIN_SWAB_H -#define _BLACKFIN_SWAB_H +#ifndef _UAPI_BLACKFIN_SWAB_H +#define _UAPI_BLACKFIN_SWAB_H #include <linux/types.h> #include <asm-generic/swab.h> @@ -47,4 +47,4 @@ static __inline__ __attribute_const__ __u16 __arch_swab16(__u16 xx) #endif /* __GNUC__ */ -#endif /* _BLACKFIN_SWAB_H */ +#endif /* _UAPI_BLACKFIN_SWAB_H */ diff --git a/arch/blackfin/include/uapi/asm/unistd.h b/arch/blackfin/include/uapi/asm/unistd.h new file mode 100644 index 00000000000..a4511649a86 --- /dev/null +++ b/arch/blackfin/include/uapi/asm/unistd.h @@ -0,0 +1,437 @@ +/* + * Copyright 2004-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _UAPI__ASM_BFIN_UNISTD_H +#define _UAPI__ASM_BFIN_UNISTD_H +/* + * This file contains the system call numbers. + */ +#define __NR_restart_syscall 0 +#define __NR_exit 1 + /* 2 __NR_fork not supported on nommu */ +#define __NR_read 3 +#define __NR_write 4 +#define __NR_open 5 +#define __NR_close 6 + /* 7 __NR_waitpid obsolete */ +#define __NR_creat 8 +#define __NR_link 9 +#define __NR_unlink 10 +#define __NR_execve 11 +#define __NR_chdir 12 +#define __NR_time 13 +#define __NR_mknod 14 +#define __NR_chmod 15 +#define __NR_chown 16 + /* 17 __NR_break obsolete */ + /* 18 __NR_oldstat obsolete */ +#define __NR_lseek 19 +#define __NR_getpid 20 +#define __NR_mount 21 + /* 22 __NR_umount obsolete */ +#define __NR_setuid 23 +#define __NR_getuid 24 +#define __NR_stime 25 +#define __NR_ptrace 26 +#define __NR_alarm 27 + /* 28 __NR_oldfstat obsolete */ +#define __NR_pause 29 + /* 30 __NR_utime obsolete */ + /* 31 __NR_stty obsolete */ + /* 32 __NR_gtty obsolete */ +#define __NR_access 33 +#define __NR_nice 34 + /* 35 __NR_ftime obsolete */ +#define __NR_sync 36 +#define __NR_kill 37 +#define __NR_rename 38 +#define __NR_mkdir 39 +#define __NR_rmdir 40 +#define __NR_dup 41 +#define __NR_pipe 42 +#define __NR_times 43 + /* 44 __NR_prof obsolete */ +#define __NR_brk 45 +#define __NR_setgid 46 +#define __NR_getgid 47 + /* 48 __NR_signal obsolete */ +#define __NR_geteuid 49 +#define __NR_getegid 50 +#define __NR_acct 51 +#define __NR_umount2 52 + /* 53 __NR_lock obsolete */ +#define __NR_ioctl 54 +#define __NR_fcntl 55 + /* 56 __NR_mpx obsolete */ +#define __NR_setpgid 57 + /* 58 __NR_ulimit obsolete */ + /* 59 __NR_oldolduname obsolete */ +#define __NR_umask 60 +#define __NR_chroot 61 +#define __NR_ustat 62 +#define __NR_dup2 63 +#define __NR_getppid 64 +#define __NR_getpgrp 65 +#define __NR_setsid 66 + /* 67 __NR_sigaction obsolete */ +#define __NR_sgetmask 68 +#define __NR_ssetmask 69 +#define __NR_setreuid 70 +#define __NR_setregid 71 + /* 72 __NR_sigsuspend obsolete */ + /* 73 __NR_sigpending obsolete */ +#define __NR_sethostname 74 +#define __NR_setrlimit 75 + /* 76 __NR_old_getrlimit obsolete */ +#define __NR_getrusage 77 +#define __NR_gettimeofday 78 +#define __NR_settimeofday 79 +#define __NR_getgroups 80 +#define __NR_setgroups 81 + /* 82 __NR_select obsolete */ +#define __NR_symlink 83 + /* 84 __NR_oldlstat obsolete */ +#define __NR_readlink 85 + /* 86 __NR_uselib obsolete */ + /* 87 __NR_swapon obsolete */ +#define __NR_reboot 88 + /* 89 __NR_readdir obsolete */ + /* 90 __NR_mmap obsolete */ +#define __NR_munmap 91 +#define __NR_truncate 92 +#define __NR_ftruncate 93 +#define __NR_fchmod 94 +#define __NR_fchown 95 +#define __NR_getpriority 96 +#define __NR_setpriority 97 + /* 98 __NR_profil obsolete */ +#define __NR_statfs 99 +#define __NR_fstatfs 100 + /* 101 __NR_ioperm */ + /* 102 __NR_socketcall obsolete */ +#define __NR_syslog 103 +#define __NR_setitimer 104 +#define __NR_getitimer 105 +#define __NR_stat 106 +#define __NR_lstat 107 +#define __NR_fstat 108 + /* 109 __NR_olduname obsolete */ + /* 110 __NR_iopl obsolete */ +#define __NR_vhangup 111 + /* 112 __NR_idle obsolete */ + /* 113 __NR_vm86old */ +#define __NR_wait4 114 + /* 115 __NR_swapoff obsolete */ +#define __NR_sysinfo 116 + /* 117 __NR_ipc oboslete */ +#define __NR_fsync 118 + /* 119 __NR_sigreturn obsolete */ +#define __NR_clone 120 +#define __NR_setdomainname 121 +#define __NR_uname 122 + /* 123 __NR_modify_ldt obsolete */ +#define __NR_adjtimex 124 +#define __NR_mprotect 125 + /* 126 __NR_sigprocmask obsolete */ + /* 127 __NR_create_module obsolete */ +#define __NR_init_module 128 +#define __NR_delete_module 129 + /* 130 __NR_get_kernel_syms obsolete */ +#define __NR_quotactl 131 +#define __NR_getpgid 132 +#define __NR_fchdir 133 +#define __NR_bdflush 134 + /* 135 was sysfs */ +#define __NR_personality 136 + /* 137 __NR_afs_syscall */ +#define __NR_setfsuid 138 +#define __NR_setfsgid 139 +#define __NR__llseek 140 +#define __NR_getdents 141 + /* 142 __NR__newselect obsolete */ +#define __NR_flock 143 + /* 144 __NR_msync obsolete */ +#define __NR_readv 145 +#define __NR_writev 146 +#define __NR_getsid 147 +#define __NR_fdatasync 148 +#define __NR__sysctl 149 + /* 150 __NR_mlock */ + /* 151 __NR_munlock */ + /* 152 __NR_mlockall */ + /* 153 __NR_munlockall */ +#define __NR_sched_setparam 154 +#define __NR_sched_getparam 155 +#define __NR_sched_setscheduler 156 +#define __NR_sched_getscheduler 157 +#define __NR_sched_yield 158 +#define __NR_sched_get_priority_max 159 +#define __NR_sched_get_priority_min 160 +#define __NR_sched_rr_get_interval 161 +#define __NR_nanosleep 162 +#define __NR_mremap 163 +#define __NR_setresuid 164 +#define __NR_getresuid 165 + /* 166 __NR_vm86 */ + /* 167 __NR_query_module */ + /* 168 __NR_poll */ +#define __NR_nfsservctl 169 +#define __NR_setresgid 170 +#define __NR_getresgid 171 +#define __NR_prctl 172 +#define __NR_rt_sigreturn 173 +#define __NR_rt_sigaction 174 +#define __NR_rt_sigprocmask 175 +#define __NR_rt_sigpending 176 +#define __NR_rt_sigtimedwait 177 +#define __NR_rt_sigqueueinfo 178 +#define __NR_rt_sigsuspend 179 +#define __NR_pread 180 +#define __NR_pwrite 181 +#define __NR_lchown 182 +#define __NR_getcwd 183 +#define __NR_capget 184 +#define __NR_capset 185 +#define __NR_sigaltstack 186 +#define __NR_sendfile 187 + /* 188 __NR_getpmsg */ + /* 189 __NR_putpmsg */ +#define __NR_vfork 190 +#define __NR_getrlimit 191 +#define __NR_mmap2 192 +#define __NR_truncate64 193 +#define __NR_ftruncate64 194 +#define __NR_stat64 195 +#define __NR_lstat64 196 +#define __NR_fstat64 197 +#define __NR_chown32 198 +#define __NR_getuid32 199 +#define __NR_getgid32 200 +#define __NR_geteuid32 201 +#define __NR_getegid32 202 +#define __NR_setreuid32 203 +#define __NR_setregid32 204 +#define __NR_getgroups32 205 +#define __NR_setgroups32 206 +#define __NR_fchown32 207 +#define __NR_setresuid32 208 +#define __NR_getresuid32 209 +#define __NR_setresgid32 210 +#define __NR_getresgid32 211 +#define __NR_lchown32 212 +#define __NR_setuid32 213 +#define __NR_setgid32 214 +#define __NR_setfsuid32 215 +#define __NR_setfsgid32 216 +#define __NR_pivot_root 217 + /* 218 __NR_mincore */ + /* 219 __NR_madvise */ +#define __NR_getdents64 220 +#define __NR_fcntl64 221 + /* 222 reserved for TUX */ + /* 223 reserved for TUX */ +#define __NR_gettid 224 +#define __NR_readahead 225 +#define __NR_setxattr 226 +#define __NR_lsetxattr 227 +#define __NR_fsetxattr 228 +#define __NR_getxattr 229 +#define __NR_lgetxattr 230 +#define __NR_fgetxattr 231 +#define __NR_listxattr 232 +#define __NR_llistxattr 233 +#define __NR_flistxattr 234 +#define __NR_removexattr 235 +#define __NR_lremovexattr 236 +#define __NR_fremovexattr 237 +#define __NR_tkill 238 +#define __NR_sendfile64 239 +#define __NR_futex 240 +#define __NR_sched_setaffinity 241 +#define __NR_sched_getaffinity 242 + /* 243 __NR_set_thread_area */ + /* 244 __NR_get_thread_area */ +#define __NR_io_setup 245 +#define __NR_io_destroy 246 +#define __NR_io_getevents 247 +#define __NR_io_submit 248 +#define __NR_io_cancel 249 + /* 250 __NR_alloc_hugepages */ + /* 251 __NR_free_hugepages */ +#define __NR_exit_group 252 +#define __NR_lookup_dcookie 253 +#define __NR_bfin_spinlock 254 + +#define __NR_epoll_create 255 +#define __NR_epoll_ctl 256 +#define __NR_epoll_wait 257 + /* 258 __NR_remap_file_pages */ +#define __NR_set_tid_address 259 +#define __NR_timer_create 260 +#define __NR_timer_settime 261 +#define __NR_timer_gettime 262 +#define __NR_timer_getoverrun 263 +#define __NR_timer_delete 264 +#define __NR_clock_settime 265 +#define __NR_clock_gettime 266 +#define __NR_clock_getres 267 +#define __NR_clock_nanosleep 268 +#define __NR_statfs64 269 +#define __NR_fstatfs64 270 +#define __NR_tgkill 271 +#define __NR_utimes 272 +#define __NR_fadvise64_64 273 + /* 274 __NR_vserver */ + /* 275 __NR_mbind */ + /* 276 __NR_get_mempolicy */ + /* 277 __NR_set_mempolicy */ +#define __NR_mq_open 278 +#define __NR_mq_unlink 279 +#define __NR_mq_timedsend 280 +#define __NR_mq_timedreceive 281 +#define __NR_mq_notify 282 +#define __NR_mq_getsetattr 283 +#define __NR_kexec_load 284 +#define __NR_waitid 285 +#define __NR_add_key 286 +#define __NR_request_key 287 +#define __NR_keyctl 288 +#define __NR_ioprio_set 289 +#define __NR_ioprio_get 290 +#define __NR_inotify_init 291 +#define __NR_inotify_add_watch 292 +#define __NR_inotify_rm_watch 293 + /* 294 __NR_migrate_pages */ +#define __NR_openat 295 +#define __NR_mkdirat 296 +#define __NR_mknodat 297 +#define __NR_fchownat 298 +#define __NR_futimesat 299 +#define __NR_fstatat64 300 +#define __NR_unlinkat 301 +#define __NR_renameat 302 +#define __NR_linkat 303 +#define __NR_symlinkat 304 +#define __NR_readlinkat 305 +#define __NR_fchmodat 306 +#define __NR_faccessat 307 +#define __NR_pselect6 308 +#define __NR_ppoll 309 +#define __NR_unshare 310 + +/* Blackfin private syscalls */ +#define __NR_sram_alloc 311 +#define __NR_sram_free 312 +#define __NR_dma_memcpy 313 + +/* socket syscalls */ +#define __NR_accept 314 +#define __NR_bind 315 +#define __NR_connect 316 +#define __NR_getpeername 317 +#define __NR_getsockname 318 +#define __NR_getsockopt 319 +#define __NR_listen 320 +#define __NR_recv 321 +#define __NR_recvfrom 322 +#define __NR_recvmsg 323 +#define __NR_send 324 +#define __NR_sendmsg 325 +#define __NR_sendto 326 +#define __NR_setsockopt 327 +#define __NR_shutdown 328 +#define __NR_socket 329 +#define __NR_socketpair 330 + +/* sysv ipc syscalls */ +#define __NR_semctl 331 +#define __NR_semget 332 +#define __NR_semop 333 +#define __NR_msgctl 334 +#define __NR_msgget 335 +#define __NR_msgrcv 336 +#define __NR_msgsnd 337 +#define __NR_shmat 338 +#define __NR_shmctl 339 +#define __NR_shmdt 340 +#define __NR_shmget 341 + +#define __NR_splice 342 +#define __NR_sync_file_range 343 +#define __NR_tee 344 +#define __NR_vmsplice 345 + +#define __NR_epoll_pwait 346 +#define __NR_utimensat 347 +#define __NR_signalfd 348 +#define __NR_timerfd_create 349 +#define __NR_eventfd 350 +#define __NR_pread64 351 +#define __NR_pwrite64 352 +#define __NR_fadvise64 353 +#define __NR_set_robust_list 354 +#define __NR_get_robust_list 355 +#define __NR_fallocate 356 +#define __NR_semtimedop 357 +#define __NR_timerfd_settime 358 +#define __NR_timerfd_gettime 359 +#define __NR_signalfd4 360 +#define __NR_eventfd2 361 +#define __NR_epoll_create1 362 +#define __NR_dup3 363 +#define __NR_pipe2 364 +#define __NR_inotify_init1 365 +#define __NR_preadv 366 +#define __NR_pwritev 367 +#define __NR_rt_tgsigqueueinfo 368 +#define __NR_perf_event_open 369 +#define __NR_recvmmsg 370 +#define __NR_fanotify_init 371 +#define __NR_fanotify_mark 372 +#define __NR_prlimit64 373 +#define __NR_cacheflush 374 +#define __NR_name_to_handle_at 375 +#define __NR_open_by_handle_at 376 +#define __NR_clock_adjtime 377 +#define __NR_syncfs 378 +#define __NR_setns 379 +#define __NR_sendmmsg 380 +#define __NR_process_vm_readv 381 +#define __NR_process_vm_writev 382 + +#define __NR_syscall 383 +#define NR_syscalls __NR_syscall + +/* Old optional stuff no one actually uses */ +#define __IGNORE_sysfs +#define __IGNORE_uselib + +/* Implement the newer interfaces */ +#define __IGNORE_mmap +#define __IGNORE_poll +#define __IGNORE_select +#define __IGNORE_utime + +/* Not relevant on no-mmu */ +#define __IGNORE_swapon +#define __IGNORE_swapoff +#define __IGNORE_msync +#define __IGNORE_mlock +#define __IGNORE_munlock +#define __IGNORE_mlockall +#define __IGNORE_munlockall +#define __IGNORE_mincore +#define __IGNORE_madvise +#define __IGNORE_remap_file_pages +#define __IGNORE_mbind +#define __IGNORE_get_mempolicy +#define __IGNORE_set_mempolicy +#define __IGNORE_migrate_pages +#define __IGNORE_move_pages +#define __IGNORE_getcpu + + +#endif /* _UAPI__ASM_BFIN_UNISTD_H */ diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile index 735f24e0742..703dc7cf2ec 100644 --- a/arch/blackfin/kernel/Makefile +++ b/arch/blackfin/kernel/Makefile @@ -7,7 +7,7 @@ extra-y := vmlinux.lds obj-y := \ entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \ sys_bfin.o traps.o irqchip.o dma-mapping.o flat.o \ - fixed_code.o reboot.o bfin_gpio.o bfin_dma.o \ + fixed_code.o reboot.o bfin_dma.o \ exception.o dumpstack.o ifeq ($(CONFIG_GENERIC_CLOCKEVENTS),y) @@ -16,6 +16,7 @@ else obj-y += time.o endif +obj-$(CONFIG_GPIO_ADI) += bfin_gpio.o obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o obj-$(CONFIG_FUNCTION_TRACER) += ftrace-entry.o obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index ed978f1c5cb..a017359c182 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -11,11 +11,8 @@ #include <linux/err.h> #include <linux/proc_fs.h> #include <linux/seq_file.h> -#include <asm/blackfin.h> -#include <asm/gpio.h> -#include <asm/portmux.h> +#include <linux/gpio.h> #include <linux/irq.h> -#include <asm/irq_handler.h> #if ANOMALY_05000311 || ANOMALY_05000323 enum { @@ -58,19 +55,6 @@ static struct gpio_port_t * const gpio_array[] = { (struct gpio_port_t *) FIO0_FLAG_D, (struct gpio_port_t *) FIO1_FLAG_D, (struct gpio_port_t *) FIO2_FLAG_D, -#elif defined(CONFIG_BF54x) || defined(CONFIG_BF60x) - (struct gpio_port_t *)PORTA_FER, - (struct gpio_port_t *)PORTB_FER, - (struct gpio_port_t *)PORTC_FER, - (struct gpio_port_t *)PORTD_FER, - (struct gpio_port_t *)PORTE_FER, - (struct gpio_port_t *)PORTF_FER, - (struct gpio_port_t *)PORTG_FER, -# if defined(CONFIG_BF54x) - (struct gpio_port_t *)PORTH_FER, - (struct gpio_port_t *)PORTI_FER, - (struct gpio_port_t *)PORTJ_FER, -# endif #else # error no gpio arrays defined #endif @@ -169,12 +153,6 @@ DECLARE_RESERVED_MAP(gpio_irq, GPIO_BANK_NUM); inline int check_gpio(unsigned gpio) { -#if defined(CONFIG_BF54x) - if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15 - || gpio == GPIO_PH14 || gpio == GPIO_PH15 - || gpio == GPIO_PJ14 || gpio == GPIO_PJ15) - return -EINVAL; -#endif if (gpio >= MAX_BLACKFIN_GPIOS) return -EINVAL; return 0; @@ -212,12 +190,6 @@ static void port_setup(unsigned gpio, unsigned short usage) else *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio); SSYNC(); -#elif defined(CONFIG_BF54x) || defined(CONFIG_BF60x) - if (usage == GPIO_USAGE) - gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio); - else - gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio); - SSYNC(); #endif } @@ -255,7 +227,7 @@ static int portmux_group_check(unsigned short per) u16 ident = P_IDENT(per); u16 function = P_FUNCT2MUX(per); s8 offset = port_mux[ident]; - u16 m, pmux, pfunc; + u16 m, pmux, pfunc, mask; if (offset < 0) return 0; @@ -270,10 +242,12 @@ static int portmux_group_check(unsigned short per) continue; if (offset == 1) - pfunc = (pmux >> offset) & 3; + mask = 3; else - pfunc = (pmux >> offset) & 1; - if (pfunc != function) { + mask = 1; + + pfunc = (pmux >> offset) & mask; + if (pfunc != (function & mask)) { pr_err("pin group conflict! request pin %d func %d conflict with pin %d func %d\n", ident, function, m, pfunc); return -EINVAL; @@ -288,43 +262,21 @@ static void portmux_setup(unsigned short per) u16 ident = P_IDENT(per); u16 function = P_FUNCT2MUX(per); s8 offset = port_mux[ident]; - u16 pmux; + u16 pmux, mask; if (offset == -1) return; pmux = bfin_read_PORT_MUX(); - if (offset != 1) - pmux &= ~(1 << offset); + if (offset == 1) + mask = 3; else - pmux &= ~(3 << 1); - pmux |= (function << offset); - bfin_write_PORT_MUX(pmux); -} -#elif defined(CONFIG_BF54x) || defined(CONFIG_BF60x) -inline void portmux_setup(unsigned short per) -{ - u16 ident = P_IDENT(per); - u16 function = P_FUNCT2MUX(per); - u32 pmux; + mask = 1; - pmux = gpio_array[gpio_bank(ident)]->port_mux; + pmux &= ~(mask << offset); + pmux |= ((function & mask) << offset); - pmux &= ~(0x3 << (2 * gpio_sub_n(ident))); - pmux |= (function & 0x3) << (2 * gpio_sub_n(ident)); - - gpio_array[gpio_bank(ident)]->port_mux = pmux; -} - -inline u16 get_portmux(unsigned short per) -{ - u16 ident = P_IDENT(per); - u32 pmux = gpio_array[gpio_bank(ident)]->port_mux; - return (pmux >> (2 * gpio_sub_n(ident)) & 0x3); -} -static int portmux_group_check(unsigned short per) -{ - return 0; + bfin_write_PORT_MUX(pmux); } #elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x) static int portmux_group_check(unsigned short per) @@ -379,7 +331,6 @@ static int portmux_group_check(unsigned short per) } #endif -#if !(defined(CONFIG_BF54x) || defined(CONFIG_BF60x)) /*********************************************************** * * FUNCTIONS: Blackfin General Purpose Ports Access Functions @@ -572,7 +523,7 @@ static const unsigned int sic_iwr_irqs[] = { ************************************************************* * MODIFICATION HISTORY : **************************************************************/ -int gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl) +int bfin_gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl) { unsigned long flags; @@ -591,7 +542,7 @@ int gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl) return 0; } -int bfin_pm_standby_ctrl(unsigned ctrl) +int bfin_gpio_pm_standby_ctrl(unsigned ctrl) { u16 bank, mask, i; @@ -682,53 +633,6 @@ void bfin_gpio_pm_hibernate_restore(void) #endif -#else /* CONFIG_BF54x || CONFIG_BF60x */ -#ifdef CONFIG_PM - -int bfin_pm_standby_ctrl(unsigned ctrl) -{ - return 0; -} - -void bfin_gpio_pm_hibernate_suspend(void) -{ - int i, bank; - - for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { - bank = gpio_bank(i); - - gpio_bank_saved[bank].fer = gpio_array[bank]->port_fer; - gpio_bank_saved[bank].mux = gpio_array[bank]->port_mux; - gpio_bank_saved[bank].data = gpio_array[bank]->data; - gpio_bank_saved[bank].inen = gpio_array[bank]->inen; - gpio_bank_saved[bank].dir = gpio_array[bank]->dir_set; - } -} - -void bfin_gpio_pm_hibernate_restore(void) -{ - int i, bank; - - for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { - bank = gpio_bank(i); - - gpio_array[bank]->port_mux = gpio_bank_saved[bank].mux; - gpio_array[bank]->port_fer = gpio_bank_saved[bank].fer; - gpio_array[bank]->inen = gpio_bank_saved[bank].inen; - gpio_array[bank]->data_set = gpio_bank_saved[bank].data - & gpio_bank_saved[bank].dir; - gpio_array[bank]->dir_set = gpio_bank_saved[bank].dir; - } -} -#endif - -unsigned short get_gpio_dir(unsigned gpio) -{ - return (0x01 & (gpio_array[gpio_bank(gpio)]->dir_clear >> gpio_sub_n(gpio))); -} -EXPORT_SYMBOL(get_gpio_dir); - -#endif /* CONFIG_BF54x || CONFIG_BF60x */ /*********************************************************** * @@ -785,11 +689,7 @@ int peripheral_request(unsigned short per, const char *label) * be requested and used by several drivers */ -#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x) - if (!((per & P_MAYSHARE) && get_portmux(per) == P_FUNCT2MUX(per))) { -#else if (!(per & P_MAYSHARE)) { -#endif /* * Allow that the identical pin function can * be requested from the same driver twice @@ -938,12 +838,9 @@ int bfin_gpio_request(unsigned gpio, const char *label) if (unlikely(is_reserved(gpio_irq, gpio, 1))) { printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved as gpio-irq!" " (Documentation/blackfin/bfin-gpio-notes.txt)\n", gpio); - } -#if !(defined(CONFIG_BF54x) || defined(CONFIG_BF60x)) - else { /* Reset POLAR setting when acquiring a gpio for the first time */ + } else { /* Reset POLAR setting when acquiring a gpio for the first time */ set_gpio_polar(gpio, 0); } -#endif reserve(gpio, gpio); set_label(gpio, label); @@ -1112,11 +1009,7 @@ void bfin_gpio_irq_free(unsigned gpio) static inline void __bfin_gpio_direction_input(unsigned gpio) { -#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x) - gpio_array[gpio_bank(gpio)]->dir_clear = gpio_bit(gpio); -#else gpio_array[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio); -#endif gpio_array[gpio_bank(gpio)]->inen |= gpio_bit(gpio); } @@ -1140,17 +1033,7 @@ EXPORT_SYMBOL(bfin_gpio_direction_input); void bfin_gpio_irq_prepare(unsigned gpio) { -#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x) - unsigned long flags; -#endif - port_setup(gpio, GPIO_USAGE); - -#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x) - flags = hard_local_irq_save(); - __bfin_gpio_direction_input(gpio); - hard_local_irq_restore(flags); -#endif } void bfin_gpio_set_value(unsigned gpio, int arg) @@ -1175,11 +1058,7 @@ int bfin_gpio_direction_output(unsigned gpio, int value) gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio); gpio_set_value(gpio, value); -#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x) - gpio_array[gpio_bank(gpio)]->dir_set = gpio_bit(gpio); -#else gpio_array[gpio_bank(gpio)]->dir |= gpio_bit(gpio); -#endif AWA_DUMMY_READ(dir); hard_local_irq_restore(flags); @@ -1190,9 +1069,6 @@ EXPORT_SYMBOL(bfin_gpio_direction_output); int bfin_gpio_get_value(unsigned gpio) { -#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x) - return (1 & (gpio_array[gpio_bank(gpio)]->data >> gpio_sub_n(gpio))); -#else unsigned long flags; if (unlikely(get_gpio_edge(gpio))) { @@ -1205,7 +1081,6 @@ int bfin_gpio_get_value(unsigned gpio) return ret; } else return get_gpio_data(gpio); -#endif } EXPORT_SYMBOL(bfin_gpio_get_value); diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c index 34e96ce02aa..b49a53b583d 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c @@ -30,6 +30,7 @@ void __init generate_cplb_tables_cpu(unsigned int cpu) { int i_d, i_i; unsigned long addr; + unsigned long cplb_pageflags, cplb_pagesize; struct cplb_entry *d_tbl = dcplb_tbl[cpu]; struct cplb_entry *i_tbl = icplb_tbl[cpu]; @@ -49,11 +50,20 @@ void __init generate_cplb_tables_cpu(unsigned int cpu) /* Cover kernel memory with 4M pages. */ addr = 0; - for (; addr < memory_start; addr += 4 * 1024 * 1024) { +#ifdef PAGE_SIZE_16MB + cplb_pageflags = PAGE_SIZE_16MB; + cplb_pagesize = SIZE_16M; +#else + cplb_pageflags = PAGE_SIZE_4MB; + cplb_pagesize = SIZE_4M; +#endif + + + for (; addr < memory_start; addr += cplb_pagesize) { d_tbl[i_d].addr = addr; - d_tbl[i_d++].data = SDRAM_DGENERIC | PAGE_SIZE_4MB; + d_tbl[i_d++].data = SDRAM_DGENERIC | cplb_pageflags; i_tbl[i_i].addr = addr; - i_tbl[i_i++].data = SDRAM_IGENERIC | PAGE_SIZE_4MB; + i_tbl[i_i++].data = SDRAM_IGENERIC | cplb_pageflags; } #ifdef CONFIG_ROMKERNEL diff --git a/arch/blackfin/kernel/cplb-nompu/cplbmgr.c b/arch/blackfin/kernel/cplb-nompu/cplbmgr.c index e854f9066cb..79cc0f6dcdd 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbmgr.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbmgr.c @@ -145,7 +145,7 @@ MGR_ATTR static int dcplb_miss(int cpu) unsigned long addr = bfin_read_DCPLB_FAULT_ADDR(); int status = bfin_read_DCPLB_STATUS(); int idx; - unsigned long d_data, base, addr1, eaddr; + unsigned long d_data, base, addr1, eaddr, cplb_pagesize, cplb_pageflags; nr_dcplb_miss[cpu]++; if (unlikely(status & FAULT_USERSUPV)) @@ -167,18 +167,37 @@ MGR_ATTR static int dcplb_miss(int cpu) if (unlikely(d_data == 0)) return CPLB_NO_ADDR_MATCH; - addr1 = addr & ~(SIZE_4M - 1); addr &= ~(SIZE_1M - 1); d_data |= PAGE_SIZE_1MB; - if (addr1 >= base && (addr1 + SIZE_4M) <= eaddr) { + + /* BF60x support large than 4M CPLB page size */ +#ifdef PAGE_SIZE_16MB + cplb_pageflags = PAGE_SIZE_16MB; + cplb_pagesize = SIZE_16M; +#else + cplb_pageflags = PAGE_SIZE_4MB; + cplb_pagesize = SIZE_4M; +#endif + +find_pagesize: + addr1 = addr & ~(cplb_pagesize - 1); + if (addr1 >= base && (addr1 + cplb_pagesize) <= eaddr) { /* * This works because * (PAGE_SIZE_4MB & PAGE_SIZE_1MB) == PAGE_SIZE_1MB. */ - d_data |= PAGE_SIZE_4MB; + d_data |= cplb_pageflags; addr = addr1; + goto found_pagesize; + } else { + if (cplb_pagesize > SIZE_4M) { + cplb_pageflags = PAGE_SIZE_4MB; + cplb_pagesize = SIZE_4M; + goto find_pagesize; + } } +found_pagesize: #ifdef CONFIG_BF60x if ((addr >= ASYNC_BANK0_BASE) && (addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE)) diff --git a/arch/blackfin/kernel/cplbinfo.c b/arch/blackfin/kernel/cplbinfo.c index 0bdaa517a50..5b80d59e66e 100644 --- a/arch/blackfin/kernel/cplbinfo.c +++ b/arch/blackfin/kernel/cplbinfo.c @@ -17,8 +17,13 @@ #include <asm/cplbinit.h> #include <asm/blackfin.h> -static char const page_strtbl[][3] = { "1K", "4K", "1M", "4M" }; -#define page(flags) (((flags) & 0x30000) >> 16) +static char const page_strtbl[][4] = { + "1K", "4K", "1M", "4M", +#ifdef CONFIG_BF60x + "16K", "64K", "16M", "64M", +#endif +}; +#define page(flags) (((flags) & 0x70000) >> 16) #define strpage(flags) page_strtbl[page(flags)] struct cplbinfo_data { @@ -116,14 +121,12 @@ static const struct seq_operations cplbinfo_sops = { static int cplbinfo_open(struct inode *inode, struct file *file) { - struct proc_dir_entry *pde = PDE(file->f_path.dentry->d_inode); char cplb_type; - unsigned int cpu; + unsigned int cpu = (unsigned long)PDE_DATA(file_inode(file)); int ret; struct seq_file *m; struct cplbinfo_data *cdata; - cpu = (unsigned int)pde->data; cplb_type = cpu & CPLBINFO_DCPLB_FLAG ? 'D' : 'I'; cpu &= ~CPLBINFO_DCPLB_FLAG; diff --git a/arch/blackfin/kernel/debug-mmrs.c b/arch/blackfin/kernel/debug-mmrs.c index 01232a13470..947ad083233 100644 --- a/arch/blackfin/kernel/debug-mmrs.c +++ b/arch/blackfin/kernel/debug-mmrs.c @@ -10,6 +10,7 @@ #include <linux/fs.h> #include <linux/kernel.h> #include <linux/module.h> +#include <linux/i2c/bfin_twi.h> #include <asm/blackfin.h> #include <asm/gpio.h> diff --git a/arch/blackfin/kernel/dma-mapping.c b/arch/blackfin/kernel/dma-mapping.c index e7be6532d6a..df437e52d9d 100644 --- a/arch/blackfin/kernel/dma-mapping.c +++ b/arch/blackfin/kernel/dma-mapping.c @@ -13,6 +13,7 @@ #include <linux/dma-mapping.h> #include <linux/scatterlist.h> #include <linux/export.h> +#include <linux/bitmap.h> static spinlock_t dma_page_lock; static unsigned long *dma_page; @@ -46,24 +47,17 @@ static inline unsigned int get_pages(size_t size) static unsigned long __alloc_dma_pages(unsigned int pages) { unsigned long ret = 0, flags; - int i, count = 0; + unsigned long start; if (dma_initialized == 0) dma_alloc_init(_ramend - DMA_UNCACHED_REGION, _ramend); spin_lock_irqsave(&dma_page_lock, flags); - for (i = 0; i < dma_pages;) { - if (test_bit(i++, dma_page) == 0) { - if (++count == pages) { - while (count--) - __set_bit(--i, dma_page); - - ret = dma_base + (i << PAGE_SHIFT); - break; - } - } else - count = 0; + start = bitmap_find_next_zero_area(dma_page, dma_pages, 0, pages, 0); + if (start < dma_pages) { + ret = dma_base + (start << PAGE_SHIFT); + bitmap_set(dma_page, start, pages); } spin_unlock_irqrestore(&dma_page_lock, flags); return ret; @@ -73,7 +67,6 @@ static void __free_dma_pages(unsigned long addr, unsigned int pages) { unsigned long page = (addr - dma_base) >> PAGE_SHIFT; unsigned long flags; - int i; if ((page + pages) > dma_pages) { printk(KERN_ERR "%s: freeing outside range.\n", __func__); @@ -81,9 +74,7 @@ static void __free_dma_pages(unsigned long addr, unsigned int pages) } spin_lock_irqsave(&dma_page_lock, flags); - for (i = page; i < page + pages; i++) - __clear_bit(i, dma_page); - + bitmap_clear(dma_page, page, pages); spin_unlock_irqrestore(&dma_page_lock, flags); } diff --git a/arch/blackfin/kernel/dumpstack.c b/arch/blackfin/kernel/dumpstack.c index 5cfbaa29821..95ba6d9e9a3 100644 --- a/arch/blackfin/kernel/dumpstack.c +++ b/arch/blackfin/kernel/dumpstack.c @@ -168,6 +168,7 @@ void dump_stack(void) #endif trace_buffer_save(tflags); dump_bfin_trace_buffer(); + dump_stack_print_info(KERN_DEFAULT); show_stack(current, &stack); trace_buffer_restore(tflags); } diff --git a/arch/blackfin/kernel/early_printk.c b/arch/blackfin/kernel/early_printk.c index 84ed8375113..61fbd2de993 100644 --- a/arch/blackfin/kernel/early_printk.c +++ b/arch/blackfin/kernel/early_printk.c @@ -25,8 +25,6 @@ extern struct console *bfin_earlyserial_init(unsigned int port, extern struct console *bfin_jc_early_init(void); #endif -static struct console *early_console; - /* Default console */ #define DEFAULT_PORT 0 #define DEFAULT_CFLAG CS8|B57600 diff --git a/arch/blackfin/kernel/entry.S b/arch/blackfin/kernel/entry.S index f33792cc1a0..4071265fc4f 100644 --- a/arch/blackfin/kernel/entry.S +++ b/arch/blackfin/kernel/entry.S @@ -46,53 +46,14 @@ ENTRY(_ret_from_fork) SP += -12; pseudo_long_call _schedule_tail, p5; SP += 12; - r0 = [sp + PT_IPEND]; - cc = bittst(r0,1); - if cc jump .Lin_kernel; + p1 = [sp++]; + r0 = [sp++]; + cc = p1 == 0; + if cc jump .Lfork; + sp += -12; + call (p1); + sp += 12; +.Lfork: RESTORE_CONTEXT rti; -.Lin_kernel: - bitclr(r0,1); - [sp + PT_IPEND] = r0; - /* do a 'fake' RTI by jumping to [RETI] - * to avoid clearing supervisor mode in child - */ - r0 = [sp + PT_PC]; - [sp + PT_P0] = r0; - - RESTORE_ALL_SYS - jump (p0); ENDPROC(_ret_from_fork) - -ENTRY(_sys_vfork) - r0 = sp; - r0 += 24; - [--sp] = rets; - SP += -12; - pseudo_long_call _bfin_vfork, p2; - SP += 12; - rets = [sp++]; - rts; -ENDPROC(_sys_vfork) - -ENTRY(_sys_clone) - r0 = sp; - r0 += 24; - [--sp] = rets; - SP += -12; - pseudo_long_call _bfin_clone, p2; - SP += 12; - rets = [sp++]; - rts; -ENDPROC(_sys_clone) - -ENTRY(_sys_rt_sigreturn) - r0 = sp; - r0 += 24; - [--sp] = rets; - SP += -12; - pseudo_long_call _do_rt_sigreturn, p2; - SP += 12; - rets = [sp++]; - rts; -ENDPROC(_sys_rt_sigreturn) diff --git a/arch/blackfin/kernel/ftrace.c b/arch/blackfin/kernel/ftrace.c index 9277905b82c..095de0fa044 100644 --- a/arch/blackfin/kernel/ftrace.c +++ b/arch/blackfin/kernel/ftrace.c @@ -65,11 +65,8 @@ int ftrace_update_ftrace_func(ftrace_func_t func) return ftrace_modify_code(ip, call, sizeof(call)); } -int __init ftrace_dyn_arch_init(void *data) +int __init ftrace_dyn_arch_init(void) { - /* return value is done indirectly via data */ - *(unsigned long *)data = 0; - return 0; } diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c index ff3d747154a..0ba25764b8c 100644 --- a/arch/blackfin/kernel/irqchip.c +++ b/arch/blackfin/kernel/irqchip.c @@ -11,6 +11,7 @@ #include <linux/kallsyms.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/seq_file.h> #include <asm/irq_handler.h> #include <asm/trace.h> #include <asm/pda.h> @@ -33,37 +34,15 @@ static struct irq_desc bad_irq_desc = { #endif #ifdef CONFIG_PROC_FS -int show_interrupts(struct seq_file *p, void *v) +int arch_show_interrupts(struct seq_file *p, int prec) { - int i = *(loff_t *) v, j; - struct irqaction *action; - unsigned long flags; - - if (i < NR_IRQS) { - struct irq_desc *desc = irq_to_desc(i); - - raw_spin_lock_irqsave(&desc->lock, flags); - action = desc->action; - if (!action) - goto skip; - seq_printf(p, "%3d: ", i); - for_each_online_cpu(j) - seq_printf(p, "%10u ", kstat_irqs_cpu(i, j)); - seq_printf(p, " %8s", irq_desc_get_chip(desc)->name); - seq_printf(p, " %s", action->name); - for (action = action->next; action; action = action->next) - seq_printf(p, " %s", action->name); - - seq_putc(p, '\n'); - skip: - raw_spin_unlock_irqrestore(&desc->lock, flags); - } else if (i == NR_IRQS) { - seq_printf(p, "NMI: "); - for_each_online_cpu(j) - seq_printf(p, "%10u ", cpu_pda[j].__nmi_count); - seq_printf(p, " CORE Non Maskable Interrupt\n"); - seq_printf(p, "Err: %10u\n", atomic_read(&irq_err_count)); - } + int j; + + seq_printf(p, "%*s: ", prec, "NMI"); + for_each_online_cpu(j) + seq_printf(p, "%10u ", cpu_pda[j].__nmi_count); + seq_printf(p, " CORE Non Maskable Interrupt\n"); + seq_printf(p, "%*s: %10u\n", prec, "ERR", atomic_read(&irq_err_count)); return 0; } #endif diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c index 9b80b152435..fa53faeeb0e 100644 --- a/arch/blackfin/kernel/kgdb.c +++ b/arch/blackfin/kernel/kgdb.c @@ -9,6 +9,7 @@ #include <linux/ptrace.h> /* for linux pt_regs struct */ #include <linux/kgdb.h> #include <linux/uaccess.h> +#include <asm/irq_regs.h> void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) { @@ -329,6 +330,9 @@ static void bfin_disable_hw_debug(struct pt_regs *regs) } #ifdef CONFIG_SMP +extern void generic_exec_single(int cpu, struct call_single_data *data, int wait); +static struct call_single_data kgdb_smp_ipi_data[NR_CPUS]; + void kgdb_passive_cpu_callback(void *info) { kgdb_nmicallback(raw_smp_processor_id(), get_irq_regs()); @@ -336,12 +340,18 @@ void kgdb_passive_cpu_callback(void *info) void kgdb_roundup_cpus(unsigned long flags) { - smp_call_function(kgdb_passive_cpu_callback, NULL, 0); + unsigned int cpu; + + for (cpu = cpumask_first(cpu_online_mask); cpu < nr_cpu_ids; + cpu = cpumask_next(cpu, cpu_online_mask)) { + kgdb_smp_ipi_data[cpu].func = kgdb_passive_cpu_callback; + generic_exec_single(cpu, &kgdb_smp_ipi_data[cpu], 0); + } } void kgdb_roundup_cpu(int cpu, unsigned long flags) { - smp_call_function_single(cpu, kgdb_passive_cpu_callback, NULL, 0); + generic_exec_single(cpu, &kgdb_smp_ipi_data[cpu], 0); } #endif diff --git a/arch/blackfin/kernel/perf_event.c b/arch/blackfin/kernel/perf_event.c index e47d19ae3e0..974e55496db 100644 --- a/arch/blackfin/kernel/perf_event.c +++ b/arch/blackfin/kernel/perf_event.c @@ -468,7 +468,7 @@ static void bfin_pmu_setup(int cpu) memset(cpuhw, 0, sizeof(struct cpu_hw_events)); } -static int __cpuinit +static int bfin_pmu_notifier(struct notifier_block *self, unsigned long action, void *hcpu) { unsigned int cpu = (long)hcpu; diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c index bb1cc721fcf..4aa5545c4fd 100644 --- a/arch/blackfin/kernel/process.c +++ b/arch/blackfin/kernel/process.c @@ -39,12 +39,6 @@ int nr_l1stack_tasks; void *l1_stack_base; unsigned long l1_stack_len; -/* - * Powermanagement idle function, if any.. - */ -void (*pm_idle)(void) = NULL; -EXPORT_SYMBOL(pm_idle); - void (*pm_power_off)(void) = NULL; EXPORT_SYMBOL(pm_power_off); @@ -52,15 +46,14 @@ EXPORT_SYMBOL(pm_power_off); * The idle loop on BFIN */ #ifdef CONFIG_IDLE_L1 -static void default_idle(void)__attribute__((l1_text)); -void cpu_idle(void)__attribute__((l1_text)); +void arch_cpu_idle(void)__attribute__((l1_text)); #endif /* * This is our default idle handler. We need to disable * interrupts here to ensure we don't miss a wakeup call. */ -static void default_idle(void) +void arch_cpu_idle(void) { #ifdef CONFIG_IPIPE ipipe_suspend_domain(); @@ -72,68 +65,12 @@ static void default_idle(void) hard_local_irq_enable(); } -/* - * The idle thread. We try to conserve power, while trying to keep - * overall latency low. The architecture specific idle is passed - * a value to indicate the level of "idleness" of the system. - */ -void cpu_idle(void) -{ - /* endless idle loop with no priority at all */ - while (1) { - void (*idle)(void) = pm_idle; - #ifdef CONFIG_HOTPLUG_CPU - if (cpu_is_offline(smp_processor_id())) - cpu_die(); -#endif - if (!idle) - idle = default_idle; - tick_nohz_idle_enter(); - rcu_idle_enter(); - while (!need_resched()) - idle(); - rcu_idle_exit(); - tick_nohz_idle_exit(); - preempt_enable_no_resched(); - schedule(); - preempt_disable(); - } -} - -/* - * This gets run with P1 containing the - * function to call, and R1 containing - * the "args". Note P0 is clobbered on the way here. - */ -void kernel_thread_helper(void); -__asm__(".section .text\n" - ".align 4\n" - "_kernel_thread_helper:\n\t" - "\tsp += -12;\n\t" - "\tr0 = r1;\n\t" "\tcall (p1);\n\t" "\tcall _do_exit;\n" ".previous"); - -/* - * Create a kernel thread. - */ -pid_t kernel_thread(int (*fn) (void *), void *arg, unsigned long flags) +void arch_cpu_idle_dead(void) { - struct pt_regs regs; - - memset(®s, 0, sizeof(regs)); - - regs.r1 = (unsigned long)arg; - regs.p1 = (unsigned long)fn; - regs.pc = (unsigned long)kernel_thread_helper; - regs.orig_p0 = -1; - /* Set bit 2 to tell ret_from_fork we should be returning to kernel - mode. */ - regs.ipend = 0x8002; - __asm__ __volatile__("%0 = syscfg;":"=da"(regs.syscfg):); - return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, - NULL); + cpu_die(); } -EXPORT_SYMBOL(kernel_thread); +#endif /* * Do necessary setup to start up a newly executed thread. @@ -161,70 +98,48 @@ void flush_thread(void) { } -asmlinkage int bfin_vfork(struct pt_regs *regs) +asmlinkage int bfin_clone(unsigned long clone_flags, unsigned long newsp) { - return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, rdusp(), regs, 0, NULL, - NULL); -} - -asmlinkage int bfin_clone(struct pt_regs *regs) -{ - unsigned long clone_flags; - unsigned long newsp; - #ifdef __ARCH_SYNC_CORE_DCACHE if (current->nr_cpus_allowed == num_possible_cpus()) set_cpus_allowed_ptr(current, cpumask_of(smp_processor_id())); #endif - - /* syscall2 puts clone_flags in r0 and usp in r1 */ - clone_flags = regs->r0; - newsp = regs->r1; - if (!newsp) - newsp = rdusp(); - else + if (newsp) newsp -= 12; - return do_fork(clone_flags, newsp, regs, 0, NULL, NULL); + return do_fork(clone_flags, newsp, 0, NULL, NULL); } int copy_thread(unsigned long clone_flags, unsigned long usp, unsigned long topstk, - struct task_struct *p, struct pt_regs *regs) + struct task_struct *p) { struct pt_regs *childregs; + unsigned long *v; childregs = (struct pt_regs *) (task_stack_page(p) + THREAD_SIZE) - 1; - *childregs = *regs; - childregs->r0 = 0; + v = ((unsigned long *)childregs) - 2; + if (unlikely(p->flags & PF_KTHREAD)) { + memset(childregs, 0, sizeof(struct pt_regs)); + v[0] = usp; + v[1] = topstk; + childregs->orig_p0 = -1; + childregs->ipend = 0x8000; + __asm__ __volatile__("%0 = syscfg;":"=da"(childregs->syscfg):); + p->thread.usp = 0; + } else { + *childregs = *current_pt_regs(); + childregs->r0 = 0; + p->thread.usp = usp ? : rdusp(); + v[0] = v[1] = 0; + } - p->thread.usp = usp; - p->thread.ksp = (unsigned long)childregs; + p->thread.ksp = (unsigned long)v; p->thread.pc = (unsigned long)ret_from_fork; return 0; } -/* - * sys_execve() executes a new program. - */ -asmlinkage int sys_execve(const char __user *name, - const char __user *const __user *argv, - const char __user *const __user *envp) -{ - int error; - struct filename *filename; - struct pt_regs *regs = (struct pt_regs *)((&name) + 6); - - filename = getname(name); - error = PTR_ERR(filename); - if (IS_ERR(filename)) - return error; - error = do_execve(filename->name, argv, envp, regs); - putname(filename); - return error; -} - unsigned long get_wchan(struct task_struct *p) { unsigned long fp, pc; diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c index e1f88e028cf..8b8fe671b1a 100644 --- a/arch/blackfin/kernel/ptrace.c +++ b/arch/blackfin/kernel/ptrace.c @@ -117,6 +117,7 @@ put_reg(struct task_struct *task, unsigned long regno, unsigned long data) int is_user_addr_valid(struct task_struct *child, unsigned long start, unsigned long len) { + bool valid; struct vm_area_struct *vma; struct sram_list_struct *sraml; @@ -124,9 +125,12 @@ is_user_addr_valid(struct task_struct *child, unsigned long start, unsigned long if (start + len < start) return -EIO; + down_read(&child->mm->mmap_sem); vma = find_vma(child->mm, start); - if (vma && start >= vma->vm_start && start + len <= vma->vm_end) - return 0; + valid = vma && start >= vma->vm_start && start + len <= vma->vm_end; + up_read(&child->mm->mmap_sem); + if (valid) + return 0; for (sraml = child->mm->context.sram_list; sraml; sraml = sraml->next) if (start >= (unsigned long)sraml->addr diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index fb96e607adc..4f424ae3b36 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -17,7 +17,7 @@ #ifdef CONFIG_MTD_UCLINUX #include <linux/mtd/map.h> #include <linux/ext2_fs.h> -#include <linux/cramfs_fs.h> +#include <uapi/linux/cramfs_fs.h> #include <linux/romfs_fs.h> #endif @@ -35,6 +35,9 @@ #ifdef CONFIG_BF60x #include <mach/pm.h> #endif +#ifdef CONFIG_SCB_PRIORITY +#include <asm/scb.h> +#endif u16 _bfin_swrst; EXPORT_SYMBOL(_bfin_swrst); @@ -99,7 +102,7 @@ void __init generate_cplb_tables(void) } #endif -void __cpuinit bfin_setup_caches(unsigned int cpu) +void bfin_setup_caches(unsigned int cpu) { #ifdef CONFIG_BFIN_ICACHE bfin_icache_init(icplb_tbl[cpu]); @@ -165,7 +168,7 @@ void __cpuinit bfin_setup_caches(unsigned int cpu) #endif } -void __cpuinit bfin_setup_cpudata(unsigned int cpu) +void bfin_setup_cpudata(unsigned int cpu) { struct blackfin_cpudata *cpudata = &per_cpu(cpu_data, cpu); @@ -1101,6 +1104,9 @@ void __init setup_arch(char **cmdline_p) #endif init_exception_vectors(); bfin_cache_init(); /* Initialize caches for the boot CPU */ +#ifdef CONFIG_SCB_PRIORITY + init_scb(); +#endif } static int __init topology_init(void) @@ -1314,7 +1320,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "(Compiled for Rev %d)", bfin_compiled_revid()); } - seq_printf(m, "\ncpu MHz\t\t: %lu.%03lu/%lu.%03lu\n", + seq_printf(m, "\ncpu MHz\t\t: %lu.%06lu/%lu.%06lu\n", cclk/1000000, cclk%1000000, sclk/1000000, sclk%1000000); seq_printf(m, "bogomips\t: %lu.%02lu\n" diff --git a/arch/blackfin/kernel/signal.c b/arch/blackfin/kernel/signal.c index 6ed20a1a4af..b022af6c48f 100644 --- a/arch/blackfin/kernel/signal.c +++ b/arch/blackfin/kernel/signal.c @@ -37,11 +37,6 @@ struct rt_sigframe { struct ucontext uc; }; -asmlinkage int sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss) -{ - return do_sigaltstack(uss, uoss, rdusp()); -} - static inline int rt_restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *pr0) { @@ -82,9 +77,9 @@ rt_restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *p return err; } -asmlinkage int do_rt_sigreturn(unsigned long __unused) +asmlinkage int sys_rt_sigreturn(void) { - struct pt_regs *regs = (struct pt_regs *)__unused; + struct pt_regs *regs = current_pt_regs(); unsigned long usp = rdusp(); struct rt_sigframe *frame = (struct rt_sigframe *)(usp); sigset_t set; @@ -100,7 +95,7 @@ asmlinkage int do_rt_sigreturn(unsigned long __unused) if (rt_restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0)) goto badframe; - if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->usp) == -EFAULT) + if (restore_altstack(&frame->uc.uc_stack)) goto badframe; return r0; @@ -178,10 +173,7 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t * info, /* Create the ucontext. */ err |= __put_user(0, &frame->uc.uc_flags); err |= __put_user(0, &frame->uc.uc_link); - err |= - __put_user((void *)current->sas_ss_sp, &frame->uc.uc_stack.ss_sp); - err |= __put_user(sas_ss_flags(rdusp()), &frame->uc.uc_stack.ss_flags); - err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size); + err |= __save_altstack(&frame->uc.uc_stack, rdusp()); err |= rt_setup_sigcontext(&frame->uc.uc_mcontext, regs); err |= copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c index f608f02f29a..cb0a4845339 100644 --- a/arch/blackfin/kernel/time-ts.c +++ b/arch/blackfin/kernel/time-ts.c @@ -329,12 +329,6 @@ void bfin_coretmr_clockevent_init(void) evt->broadcast = smp_timer_broadcast; #endif - -#ifdef CONFIG_SMP - evt->broadcast = smp_timer_broadcast; -#endif - - evt->name = "bfin_core_timer"; evt->rating = 350; evt->irq = -1; diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c index 2310b249675..3126b920a4a 100644 --- a/arch/blackfin/kernel/time.c +++ b/arch/blackfin/kernel/time.c @@ -85,7 +85,7 @@ time_sched_init(irqreturn_t(*timer_routine) (int, void *)) /* * Should return useconds since last timer tick */ -u32 arch_gettimeoffset(void) +static u32 blackfin_gettimeoffset(void) { unsigned long offset; unsigned long clocks_per_jiffy; @@ -141,6 +141,10 @@ void read_persistent_clock(struct timespec *ts) void __init time_init(void) { +#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET + arch_gettimeoffset = blackfin_gettimeoffset; +#endif + #ifdef CONFIG_RTC_DRV_BFIN /* [#2663] hack to filter junk RTC values that would cause * userspace to have to deal with time values greater than diff --git a/arch/blackfin/kernel/trace.c b/arch/blackfin/kernel/trace.c index f7f7a18abca..c36efa0c716 100644 --- a/arch/blackfin/kernel/trace.c +++ b/arch/blackfin/kernel/trace.c @@ -853,6 +853,8 @@ void show_regs(struct pt_regs *fp) unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic(); pr_notice("\n"); + show_regs_print_info(KERN_NOTICE); + if (CPUID != bfin_cpuid()) pr_notice("Compiled for cpu family 0x%04x (Rev %d), " "but running on:0x%04x (Rev %d)\n", diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S index ba35864b2b7..c9eec84aa25 100644 --- a/arch/blackfin/kernel/vmlinux.lds.S +++ b/arch/blackfin/kernel/vmlinux.lds.S @@ -145,7 +145,7 @@ SECTIONS .text_l1 L1_CODE_START : AT(LOADADDR(.exit.data) + SIZEOF(.exit.data)) #else - .init.data : AT(__data_lma + __data_len) + .init.data : AT(__data_lma + __data_len + 32) { __sinitdata = .; INIT_DATA diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c index f8047ca3b33..d022112927c 100644 --- a/arch/blackfin/mach-bf518/boards/ezbrd.c +++ b/arch/blackfin/mach-bf518/boards/ezbrd.c @@ -36,7 +36,7 @@ const char bfin_board_name[] = "ADI BF518F-EZBRD"; * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition ezbrd_partitions[] = { { .name = "bootloader(nor)", @@ -61,7 +61,7 @@ static struct physmap_flash_data ezbrd_flash_data = { static struct resource ezbrd_flash_resource = { .start = 0x20000000, -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) .end = 0x202fffff, #else .end = 0x203fffff, @@ -80,14 +80,14 @@ static struct platform_device ezbrd_flash_device = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = { P_MII0_ETxD0, @@ -105,7 +105,7 @@ static const unsigned short bfin_mac_peripherals[] = { static struct bfin_phydev_platform_data bfin_phydev_data[] = { { -#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) +#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M) .addr = 3, #else .addr = 1, @@ -119,7 +119,7 @@ static struct bfin_mii_bus_platform_data bfin_mii_bus_data = { .phydev_data = bfin_phydev_data, .phy_mode = PHY_INTERFACE_MODE_MII, .mac_peripherals = bfin_mac_peripherals, -#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) +#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M) .phy_mask = 0xfff7, /* Only probe the port phy connect to the on chip MAC */ #endif .vlan1_mask = 1, @@ -140,7 +140,7 @@ static struct platform_device bfin_mac_device = { } }; -#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) +#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M) static struct dsa_chip_data ksz8893m_switch_chip_data = { .mii_bus = &bfin_mii_bus.dev, .port_names = { @@ -165,8 +165,7 @@ static struct platform_device ksz8893m_switch_device = { #endif #endif -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -193,13 +192,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -216,8 +215,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -230,9 +228,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) -#if defined(CONFIG_NET_DSA_KSZ8893M) \ - || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) +#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M) { .modalias = "ksz8893m", .max_speed_hz = 5000000, @@ -244,7 +241,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ @@ -254,7 +251,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, @@ -264,7 +261,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 2, }, #endif -#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ +#if IS_ENABLED(CONFIG_SND_SOC_WM8731) \ && defined(CONFIG_SND_SOC_WM8731_SPI) { .modalias = "wm8731", @@ -274,7 +271,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_0, }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -282,7 +279,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 1, }, #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) { .modalias = "bfin-lq035q1-spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -294,7 +291,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }; /* SPI controller data */ -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI (0) */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 6, @@ -366,7 +363,7 @@ static struct platform_device bfin_spi1_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -465,7 +462,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -520,7 +517,7 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) static struct platform_device bfin_i2s = { .name = "bfin-i2s", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -528,7 +525,7 @@ static struct platform_device bfin_i2s = { }; #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; static struct resource bfin_twi0_resource[] = { @@ -556,25 +553,25 @@ static struct platform_device i2c_bfin_twi_device = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, #endif -#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE) +#if IS_ENABLED(CONFIG_INPUT_PCF8574) { I2C_BOARD_INFO("pcf8574_keypad", 0x27), .irq = IRQ_PF8, }, #endif -#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_SSM2602) { I2C_BOARD_INFO("ssm2602", 0x1b), }, #endif }; -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -645,7 +642,7 @@ static struct platform_device bfin_sport1_uart_device = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -667,7 +664,7 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif -#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SDH_BFIN) static struct bfin_sd_host bfin_sdh_data = { .dma_chan = CH_RSI, @@ -710,24 +707,24 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, -#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) +#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M) &ksz8893m_switch_device, #endif #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, &bfin_spi1_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -736,7 +733,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -745,15 +742,15 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) &bfin_i2s, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -762,15 +759,15 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SDH_BFIN) &bf51x_sdh_device, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &ezbrd_flash_device, #endif }; @@ -784,7 +781,7 @@ static int __init ezbrd_init(void) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); /* setup BF518-EZBRD GPIO pin PG11 to AMS2, PG15 to AMS3. */ peripheral_request(P_AMS2, "ParaFlash"); -#if !defined(CONFIG_SPI_BFIN5XX) && !defined(CONFIG_SPI_BFIN5XX_MODULE) +#if !IS_ENABLED(CONFIG_SPI_BFIN5XX) peripheral_request(P_AMS3, "ParaFlash"); #endif return 0; diff --git a/arch/blackfin/mach-bf518/boards/tcm-bf518.c b/arch/blackfin/mach-bf518/boards/tcm-bf518.c index 0bedc737566..240d5cb1f02 100644 --- a/arch/blackfin/mach-bf518/boards/tcm-bf518.c +++ b/arch/blackfin/mach-bf518/boards/tcm-bf518.c @@ -36,7 +36,7 @@ const char bfin_board_name[] = "Bluetechnix TCM-BF518"; * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition tcm_partitions[] = { { .name = "bootloader(nor)", @@ -73,14 +73,14 @@ static struct platform_device tcm_flash_device = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_MII0; @@ -113,8 +113,7 @@ static struct platform_device bfin_mac_device = { }; #endif -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -141,13 +140,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -164,8 +163,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -178,7 +176,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -188,7 +186,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, @@ -198,7 +196,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 2, }, #endif -#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ +#if IS_ENABLED(CONFIG_SND_SOC_WM8731) \ && defined(CONFIG_SND_SOC_WM8731_SPI) { .modalias = "wm8731", @@ -208,7 +206,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_0, }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -216,7 +214,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 1, }, #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) { .modalias = "bfin-lq035q1-spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -228,7 +226,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }; /* SPI controller data */ -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI (0) */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 6, @@ -300,7 +298,7 @@ static struct platform_device bfin_spi1_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -399,7 +397,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -454,7 +452,7 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; static struct resource bfin_twi0_resource[] = { @@ -482,12 +480,12 @@ static struct platform_device i2c_bfin_twi_device = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, #endif -#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE) +#if IS_ENABLED(CONFIG_INPUT_PCF8574) { I2C_BOARD_INFO("pcf8574_keypad", 0x27), .irq = IRQ_PF8, @@ -495,7 +493,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #endif }; -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -566,7 +564,7 @@ static struct platform_device bfin_sport1_uart_device = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -588,7 +586,7 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif -#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SDH_BFIN) static struct bfin_sd_host bfin_sdh_data = { .dma_chan = CH_RSI, @@ -631,21 +629,21 @@ static struct platform_device *tcm_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, &bfin_spi1_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -654,7 +652,7 @@ static struct platform_device *tcm_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -663,11 +661,11 @@ static struct platform_device *tcm_devices[] __initdata = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -676,15 +674,15 @@ static struct platform_device *tcm_devices[] __initdata = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SDH_BFIN) &bf51x_sdh_device, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &tcm_flash_device, #endif }; diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h index 845e6bc8d63..46cb88231d6 100644 --- a/arch/blackfin/mach-bf518/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h @@ -165,5 +165,6 @@ #define ANOMALY_05000474 (0) #define ANOMALY_05000475 (0) #define ANOMALY_05000480 (0) +#define ANOMALY_16000030 (0) #endif diff --git a/arch/blackfin/mach-bf527/boards/ad7160eval.c b/arch/blackfin/mach-bf527/boards/ad7160eval.c index d58f50e5aa4..9501bd8d9cd 100644 --- a/arch/blackfin/mach-bf527/boards/ad7160eval.c +++ b/arch/blackfin/mach-bf527/boards/ad7160eval.c @@ -37,7 +37,7 @@ const char bfin_board_name[] = "ADI BF527-AD7160EVAL"; * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) static struct resource musb_resources[] = { [0] = { .start = 0xffc03800, @@ -97,7 +97,7 @@ static struct platform_device musb_device = { }; #endif -#if defined(CONFIG_FB_BFIN_RA158Z) || defined(CONFIG_FB_BFIN_RA158Z_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_RA158Z) static struct resource bf52x_ra158z_resources[] = { { .start = IRQ_PPI_ERROR, @@ -114,7 +114,7 @@ static struct platform_device bf52x_ra158z_device = { }; #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition ad7160eval_partitions[] = { { .name = "bootloader(nor)", @@ -154,7 +154,7 @@ static struct platform_device ad7160eval_flash_device = { }; #endif -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) static struct mtd_partition partition_info[] = { { .name = "linux kernel(nand)", @@ -200,14 +200,14 @@ static struct platform_device bf5xx_nand_device = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_RMII0; @@ -241,8 +241,7 @@ static struct platform_device bfin_mac_device = { #endif -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -269,13 +268,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) static struct platform_device bfin_i2s = { .name = "bfin-i2s", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -283,17 +282,8 @@ static struct platform_device bfin_i2s = { }; #endif -#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) -static struct platform_device bfin_tdm = { - .name = "bfin-tdm", - .id = CONFIG_SND_BF5XX_SPORT_NUM, - /* TODO: add platform data here */ -}; -#endif - static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -305,8 +295,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ - || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -314,7 +303,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 4, }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 30000000, /* max spi clock (SCK) speed in HZ */ @@ -324,7 +313,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -334,7 +323,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI controller data */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, @@ -372,7 +361,7 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -483,7 +472,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -538,7 +527,7 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_TOUCHSCREEN_AD7160) || defined(CONFIG_TOUCHSCREEN_AD7160_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7160) #include <linux/input/ad7160.h> static const struct ad7160_platform_data bfin_ad7160_ts_info = { .sensor_x_res = 854, @@ -568,7 +557,7 @@ static const struct ad7160_platform_data bfin_ad7160_ts_info = { }; #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; static struct resource bfin_twi0_resource[] = { @@ -596,7 +585,7 @@ static struct platform_device i2c_bfin_twi_device = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_TOUCHSCREEN_AD7160) || defined(CONFIG_TOUCHSCREEN_AD7160_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7160) { I2C_BOARD_INFO("ad7160", 0x33), .irq = IRQ_PH1, @@ -605,7 +594,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #endif }; -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -676,7 +665,7 @@ static struct platform_device bfin_sport1_uart_device = { #endif #endif -#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) +#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY) #include <asm/bfin_rotary.h> static struct bfin_rotary_platform_data bfin_rotary_data = { @@ -733,28 +722,28 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) &bf5xx_nand_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) &musb_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -763,11 +752,11 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_FB_BFIN_RA158Z) || defined(CONFIG_FB_BFIN_RA158Z_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_RA158Z) &bf52x_ra158z_device, #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -776,11 +765,11 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -789,21 +778,17 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) +#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY) &bfin_rotary_device, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &ad7160eval_flash_device, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) &bfin_i2s, #endif - -#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) - &bfin_tdm, -#endif }; static int __init ad7160eval_init(void) diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c index 413d0132b66..b1004b35db3 100644 --- a/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -37,7 +37,7 @@ const char bfin_board_name[] = "Bluetechnix CM-BF527"; * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) #include <linux/usb/isp1760.h> static struct resource bfin_isp1760_resources[] = { [0] = { @@ -72,7 +72,7 @@ static struct platform_device bfin_isp1760_device = { }; #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) static struct resource musb_resources[] = { [0] = { .start = 0xffc03800, @@ -134,7 +134,7 @@ static struct platform_device musb_device = { }; #endif -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) static struct mtd_partition partition_info[] = { { .name = "linux kernel(nand)", @@ -180,7 +180,7 @@ static struct platform_device bf5xx_nand_device = { }; #endif -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) static struct resource bfin_pcmcia_cf_resources[] = { { .start = 0x20310000, /* IO PORT */ @@ -209,14 +209,14 @@ static struct platform_device bfin_pcmcia_cf_device = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -249,7 +249,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +#if IS_ENABLED(CONFIG_DM9000) static struct resource dm9000_resources[] = { [0] = { .start = 0x203FB800, @@ -276,7 +276,7 @@ static struct platform_device dm9000_device = { }; #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_RMII0; @@ -309,7 +309,7 @@ static struct platform_device bfin_mac_device = { }; #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x20300000, @@ -330,8 +330,7 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -358,13 +357,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -381,8 +380,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -395,8 +393,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ - || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -404,7 +401,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 4, }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -414,7 +411,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, @@ -424,7 +421,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 2, }, #endif -#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ +#if IS_ENABLED(CONFIG_SND_SOC_WM8731) \ && defined(CONFIG_SND_SOC_WM8731_SPI) { .modalias = "wm8731", @@ -434,7 +431,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_0, }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -444,7 +441,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI controller data */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, @@ -482,7 +479,7 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) +#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR) static struct mtd_partition cm_partitions[] = { { .name = "bootloader(nor)", @@ -531,7 +528,7 @@ static struct platform_device cm_flash_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -642,7 +639,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -697,7 +694,7 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; static struct resource bfin_twi0_resource[] = { @@ -725,25 +722,25 @@ static struct platform_device i2c_bfin_twi_device = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, #endif -#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE) +#if IS_ENABLED(CONFIG_INPUT_PCF8574) { I2C_BOARD_INFO("pcf8574_keypad", 0x27), .irq = IRQ_PF8, }, #endif -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_7393) { I2C_BOARD_INFO("bfin-adv7393", 0x2B), }, #endif }; -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -814,7 +811,7 @@ static struct platform_device bfin_sport1_uart_device = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -861,48 +858,48 @@ static struct platform_device *cmbf527_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) &bf5xx_nand_device, #endif -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) &bfin_pcmcia_cf_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) &bfin_isp1760_device, #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) &musb_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +#if IS_ENABLED(CONFIG_DM9000) &dm9000_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -911,7 +908,7 @@ static struct platform_device *cmbf527_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -920,11 +917,11 @@ static struct platform_device *cmbf527_devices[] __initdata = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -933,11 +930,11 @@ static struct platform_device *cmbf527_devices[] __initdata = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) +#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR) &cm_flash_device, #endif }; diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c index 50bda79194e..a3a57235276 100644 --- a/arch/blackfin/mach-bf527/boards/ezbrd.c +++ b/arch/blackfin/mach-bf527/boards/ezbrd.c @@ -36,7 +36,7 @@ const char bfin_board_name[] = "ADI BF526-EZBRD"; * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) static struct resource musb_resources[] = { [0] = { .start = 0xffc03800, @@ -98,7 +98,7 @@ static struct platform_device musb_device = { }; #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition ezbrd_partitions[] = { { .name = "bootloader(nor)", @@ -138,7 +138,7 @@ static struct platform_device ezbrd_flash_device = { }; #endif -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) static struct mtd_partition partition_info[] = { { .name = "bootloader(nand)", @@ -188,7 +188,7 @@ static struct platform_device bf5xx_nand_device = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, @@ -196,7 +196,7 @@ static struct platform_device rtc_device = { #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_RMII0; @@ -229,8 +229,7 @@ static struct platform_device bfin_mac_device = { }; #endif -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -257,13 +256,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -279,7 +278,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879) #include <linux/spi/ad7879.h> static const struct ad7879_platform_data bfin_ad7879_ts_info = { .model = 7879, /* Model = AD7879 */ @@ -297,8 +296,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -311,7 +309,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ @@ -321,7 +319,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, @@ -331,7 +329,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 2, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI) { .modalias = "ad7879", .platform_data = &bfin_ad7879_ts_info, @@ -342,7 +340,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_CPHA | SPI_CPOL, }, #endif -#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ +#if IS_ENABLED(CONFIG_SND_SOC_WM8731) \ && defined(CONFIG_SND_SOC_WM8731_SPI) { .modalias = "wm8731", @@ -352,7 +350,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_0, }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -360,7 +358,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 1, }, #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) { .modalias = "bfin-lq035q1-spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -371,7 +369,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI controller data */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, @@ -409,7 +407,7 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -520,7 +518,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -575,7 +573,7 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; static struct resource bfin_twi0_resource[] = { @@ -603,12 +601,12 @@ static struct platform_device i2c_bfin_twi_device = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, #endif -#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE) +#if IS_ENABLED(CONFIG_INPUT_PCF8574) { I2C_BOARD_INFO("pcf8574_keypad", 0x27), .irq = IRQ_PF8, @@ -616,7 +614,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #endif }; -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -687,7 +685,7 @@ static struct platform_device bfin_sport1_uart_device = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -731,7 +729,7 @@ static struct platform_device bfin_dpmc = { }, }; -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) #include <asm/bfin-lq035q1.h> static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = { @@ -764,28 +762,28 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) &bf5xx_nand_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) &musb_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -794,11 +792,11 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) &bfin_lq035q1_device, #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -807,11 +805,11 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -820,11 +818,11 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &ezbrd_flash_device, #endif }; diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index 29f16e5c37b..d64f565dc2a 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -42,7 +42,7 @@ const char bfin_board_name[] = "ADI BF527-EZKIT"; * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) #include <linux/usb/isp1760.h> static struct resource bfin_isp1760_resources[] = { [0] = { @@ -77,7 +77,7 @@ static struct platform_device bfin_isp1760_device = { }; #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) static struct resource musb_resources[] = { [0] = { .start = 0xffc03800, @@ -139,7 +139,7 @@ static struct platform_device musb_device = { }; #endif -#if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_T350MCQB) static struct resource bf52x_t350mcqb_resources[] = { { @@ -157,7 +157,7 @@ static struct platform_device bf52x_t350mcqb_device = { }; #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) #include <asm/bfin-lq035q1.h> static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = { @@ -184,7 +184,7 @@ static struct platform_device bfin_lq035q1_device = { }; #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition ezkit_partitions[] = { { .name = "bootloader(nor)", @@ -224,7 +224,7 @@ static struct platform_device ezkit_flash_device = { }; #endif -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) static struct mtd_partition partition_info[] = { { .name = "bootloader(nand)", @@ -274,7 +274,7 @@ static struct platform_device bf5xx_nand_device = { }; #endif -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) static struct resource bfin_pcmcia_cf_resources[] = { { .start = 0x20310000, /* IO PORT */ @@ -303,14 +303,14 @@ static struct platform_device bfin_pcmcia_cf_device = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -343,7 +343,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +#if IS_ENABLED(CONFIG_DM9000) static struct resource dm9000_resources[] = { [0] = { .start = 0x203FB800, @@ -370,7 +370,7 @@ static struct platform_device dm9000_device = { }; #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_RMII0; @@ -403,7 +403,7 @@ static struct platform_device bfin_mac_device = { }; #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x20300000, @@ -427,8 +427,7 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -455,13 +454,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -477,7 +476,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879) #include <linux/spi/ad7879.h> static const struct ad7879_platform_data bfin_ad7879_ts_info = { .model = 7879, /* Model = AD7879 */ @@ -493,8 +492,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = { }; #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \ - defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) static const u16 bfin_snd_pin[][7] = { {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, @@ -542,28 +540,21 @@ static struct resource bfin_snd_resources[][4] = { }; #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) static struct platform_device bfin_i2s_pcm = { .name = "bfin-i2s-pcm-audio", .id = -1, }; #endif -#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) -static struct platform_device bfin_tdm_pcm = { - .name = "bfin-tdm-pcm-audio", - .id = -1, -}; -#endif - -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) static struct platform_device bfin_ac97_pcm = { .name = "bfin-ac97-pcm-audio", .id = -1, }; #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) static struct platform_device bfin_i2s = { .name = "bfin-i2s", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -575,22 +566,9 @@ static struct platform_device bfin_i2s = { }; #endif -#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) -static struct platform_device bfin_tdm = { - .name = "bfin-tdm", - .id = CONFIG_SND_BF5XX_SPORT_NUM, - .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]), - .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM], - .dev = { - .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM], - }, -}; -#endif - -#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \ - || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) static const char * const ad1836_link[] = { - "bfin-tdm.0", + "bfin-i2s.0", "spi0.4", }; static struct platform_device bfin_ad1836_machine = { @@ -603,8 +581,7 @@ static struct platform_device bfin_ad1836_machine = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -617,8 +594,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ - || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -628,7 +604,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -639,7 +615,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, @@ -649,7 +625,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 2, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI) { .modalias = "ad7879", .platform_data = &bfin_ad7879_ts_info, @@ -660,7 +636,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_CPHA | SPI_CPOL, }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -668,7 +644,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 1, }, #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) { .modalias = "bfin-lq035q1-spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -679,7 +655,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI controller data */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, @@ -717,7 +693,7 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -828,7 +804,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -883,7 +859,7 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; static struct resource bfin_twi0_resource[] = { @@ -910,7 +886,7 @@ static struct platform_device i2c_bfin_twi_device = { }; #endif -#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE) +#if IS_ENABLED(CONFIG_PMIC_ADP5520) #include <linux/mfd/adp5520.h> /* @@ -976,54 +952,54 @@ static struct adp5520_platform_data adp5520_pdev_data = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, #endif -#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE) +#if IS_ENABLED(CONFIG_INPUT_PCF8574) { I2C_BOARD_INFO("pcf8574_keypad", 0x27), .irq = IRQ_PF8, }, #endif -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_7393) { I2C_BOARD_INFO("bfin-adv7393", 0x2B), }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_I2C) { I2C_BOARD_INFO("ad7879", 0x2C), .irq = IRQ_PF8, .platform_data = (void *)&bfin_ad7879_ts_info, }, #endif -#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE) +#if IS_ENABLED(CONFIG_PMIC_ADP5520) { I2C_BOARD_INFO("pmic-adp5520", 0x32), .irq = IRQ_PF9, .platform_data = (void *)&adp5520_pdev_data, }, #endif -#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_SSM2602) { I2C_BOARD_INFO("ssm2602", 0x1b), }, #endif -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("ad5252", 0x2f), }, #endif -#if defined(CONFIG_SND_SOC_ADAU1373) || defined(CONFIG_SND_SOC_ADAU1373_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_ADAU1373) { I2C_BOARD_INFO("adau1373", 0x1A), }, #endif }; -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -1094,7 +1070,7 @@ static struct platform_device bfin_sport1_uart_device = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/gpio_keys.h> static struct gpio_keys_button bfin_gpio_keys_table[] = { @@ -1115,7 +1091,7 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif -#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) +#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY) #include <asm/bfin_rotary.h> static struct bfin_rotary_platform_data bfin_rotary_data = { @@ -1173,56 +1149,56 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) &bf5xx_nand_device, #endif -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) &bfin_pcmcia_cf_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) &bfin_isp1760_device, #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) &musb_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +#if IS_ENABLED(CONFIG_DM9000) &dm9000_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_T350MCQB) &bf52x_t350mcqb_device, #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) &bfin_lq035q1_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -1231,7 +1207,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -1240,11 +1216,11 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -1253,40 +1229,31 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) +#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY) &bfin_rotary_device, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &ezkit_flash_device, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) &bfin_i2s_pcm, #endif -#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) - &bfin_tdm_pcm, -#endif - -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) &bfin_ac97_pcm, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) &bfin_i2s, #endif -#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) - &bfin_tdm, -#endif - -#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \ - defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) &bfin_ad1836_machine, #endif }; diff --git a/arch/blackfin/mach-bf527/boards/tll6527m.c b/arch/blackfin/mach-bf527/boards/tll6527m.c index 1509c5a8a3f..a0f5856a5ff 100644 --- a/arch/blackfin/mach-bf527/boards/tll6527m.c +++ b/arch/blackfin/mach-bf527/boards/tll6527m.c @@ -28,8 +28,7 @@ #include <asm/portmux.h> #include <asm/dpmc.h> -#if defined(CONFIG_TOUCHSCREEN_AD7879) \ - || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879) #include <linux/spi/ad7879.h> #define LCD_BACKLIGHT_GPIO 0x40 /* TLL6527M uses TLL7UIQ35 / ADI LCD EZ Extender. AD7879 AUX GPIO is used for @@ -45,7 +44,7 @@ const char bfin_board_name[] = "TLL6527M"; * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) static struct resource musb_resources[] = { [0] = { .start = 0xffc03800, @@ -104,7 +103,7 @@ static struct platform_device musb_device = { }; #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) #include <asm/bfin-lq035q1.h> static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = { @@ -133,7 +132,7 @@ static struct platform_device bfin_lq035q1_device = { }; #endif -#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) +#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR) static struct mtd_partition tll6527m_partitions[] = { { .name = "bootloader(nor)", @@ -182,7 +181,7 @@ static struct platform_device tll6527m_flash_device = { }; #endif -#if defined(CONFIG_GPIO_DECODER) || defined(CONFIG_GPIO_DECODER_MODULE) +#if IS_ENABLED(CONFIG_GPIO_DECODER) /* An SN74LVC138A 3:8 decoder chip has been used to generate 7 augmented * outputs used as SPI CS lines for all SPI SLAVE devices on TLL6527v1-0. * EXP_GPIO_SPISEL_BASE is the base number for the expanded outputs being @@ -215,7 +214,7 @@ static struct platform_device spi_decoded_gpio = { #endif -#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE) +#if IS_ENABLED(CONFIG_INPUT_ADXL34X) #include <linux/input/adxl34x.h> static const struct adxl34x_platform_data adxl345_info = { .x_axis_offset = 0, @@ -250,14 +249,14 @@ static const struct adxl34x_platform_data adxl345_info = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_RMII0; @@ -290,8 +289,7 @@ static struct platform_device bfin_mac_device = { }; #endif -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -318,14 +316,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879) \ - || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879) static const struct ad7879_platform_data bfin_ad7879_ts_info = { .model = 7879, /* Model = AD7879 */ .x_plate_ohms = 620, /* 620 Ohm from the touch datasheet */ @@ -343,7 +340,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = { }; #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) static struct platform_device bfin_i2s = { .name = "bfin-i2s", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -351,7 +348,7 @@ static struct platform_device bfin_i2s = { }; #endif -#if defined(CONFIG_GPIO_MCP23S08) || defined(CONFIG_GPIO_MCP23S08_MODULE) +#if IS_ENABLED(CONFIG_GPIO_MCP23S08) #include <linux/spi/mcp23s08.h> static const struct mcp23s08_platform_data bfin_mcp23s08_sys_gpio_info = { .chip[0].is_present = true, @@ -364,8 +361,7 @@ static const struct mcp23s08_platform_data bfin_mcp23s08_usr_gpio_info = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -381,7 +377,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", /* @@ -396,8 +392,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_0, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) \ - || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI) { .modalias = "ad7879", .platform_data = &bfin_ad7879_ts_info, @@ -409,7 +404,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_CPHA | SPI_CPOL, }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 10000000, @@ -419,7 +414,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_CPHA | SPI_CPOL, }, #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) { .modalias = "bfin-lq035q1-spi", .max_speed_hz = 20000000, @@ -428,7 +423,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_CPHA | SPI_CPOL, }, #endif -#if defined(CONFIG_GPIO_MCP23S08) || defined(CONFIG_GPIO_MCP23S08_MODULE) +#if IS_ENABLED(CONFIG_GPIO_MCP23S08) { .modalias = "mcp23s08", .platform_data = &bfin_mcp23s08_sys_gpio_info, @@ -448,7 +443,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI controller data */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = EXP_GPIO_SPISEL_BASE + 8 + MAX_CTRL_CS, @@ -487,7 +482,7 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -600,7 +595,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -655,7 +650,7 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; static struct resource bfin_twi0_resource[] = { @@ -683,26 +678,25 @@ static struct platform_device i2c_bfin_twi_device = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, #endif -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_7393) { I2C_BOARD_INFO("bfin-adv7393", 0x2B), }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) \ - || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_I2C) { I2C_BOARD_INFO("ad7879", 0x2C), .irq = IRQ_PH14, .platform_data = (void *)&bfin_ad7879_ts_info, }, #endif -#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_SSM2602) { I2C_BOARD_INFO("ssm2602", 0x1b), }, @@ -714,8 +708,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { { I2C_BOARD_INFO("ltc3576", 0x09), }, -#if defined(CONFIG_INPUT_ADXL34X_I2C) \ - || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE) +#if IS_ENABLED(CONFIG_INPUT_ADXL34X_I2C) { I2C_BOARD_INFO("adxl34x", 0x53), .irq = IRQ_PH13, @@ -724,8 +717,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #endif }; -#if defined(CONFIG_SERIAL_BFIN_SPORT) \ - || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -823,28 +815,28 @@ static struct platform_device *tll6527m_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) &musb_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) &bfin_lq035q1_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -853,7 +845,7 @@ static struct platform_device *tll6527m_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -862,12 +854,11 @@ static struct platform_device *tll6527m_devices[] __initdata = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) \ - || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -876,15 +867,15 @@ static struct platform_device *tll6527m_devices[] __initdata = { #endif #endif -#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) +#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR) &tll6527m_flash_device, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) &bfin_i2s, #endif -#if defined(CONFIG_GPIO_DECODER) || defined(CONFIG_GPIO_DECODER_MODULE) +#if IS_ENABLED(CONFIG_GPIO_DECODER) &spi_decoded_gpio, #endif }; diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h index aa14110be4c..2f9cc33deec 100644 --- a/arch/blackfin/mach-bf527/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h @@ -285,5 +285,6 @@ #define ANOMALY_05000448 (0) #define ANOMALY_05000474 (0) #define ANOMALY_05000480 (0) +#define ANOMALY_16000030 (0) #endif diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c index 6cb7b3ed9b3..01300f40db1 100644 --- a/arch/blackfin/mach-bf533/boards/H8606.c +++ b/arch/blackfin/mach-bf533/boards/H8606.c @@ -14,7 +14,7 @@ #include <linux/mtd/partitions.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) #include <linux/usb/isp1362.h> #endif #include <linux/irq.h> @@ -29,7 +29,7 @@ */ const char bfin_board_name[] = "HV Sistemas H8606"; -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, @@ -39,7 +39,7 @@ static struct platform_device rtc_device = { /* * Driver needs to know address, irq and flag pin. */ - #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +#if IS_ENABLED(CONFIG_DM9000) static struct resource dm9000_resources[] = { [0] = { .start = 0x20300000, @@ -67,7 +67,7 @@ static struct platform_device dm9000_device = { }; #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -104,7 +104,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x20300000, @@ -125,10 +125,10 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* all SPI peripherals info goes here */ -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader (spi)", @@ -166,7 +166,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { /* Notice: for blackfin, the speed_hz is the value of register * SPI_BAUD, not the real baudrate */ static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -180,7 +180,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 16, @@ -229,7 +229,7 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -280,7 +280,7 @@ static struct platform_device bfin_uart0_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -309,7 +309,7 @@ static struct platform_device bfin_sir0_device = { #endif #endif -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_8250) #include <linux/serial_8250.h> #include <linux/serial.h> @@ -353,7 +353,7 @@ static struct platform_device serial8250_device = { #endif -#if defined(CONFIG_KEYBOARD_OPENCORES) || defined(CONFIG_KEYBOARD_OPENCORES_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_OPENCORES) /* * Configuration for one OpenCores keyboard controller in FPGA at address 0x20200030, @@ -382,43 +382,43 @@ static struct platform_device opencores_kbd_device = { #endif static struct platform_device *h8606_devices[] __initdata = { -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +#if IS_ENABLED(CONFIG_DM9000) &dm9000_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif #endif -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_8250) &serial8250_device, #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif #endif -#if defined(CONFIG_KEYBOARD_OPENCORES) || defined(CONFIG_KEYBOARD_OPENCORES_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_OPENCORES) &opencores_kbd_device, #endif }; @@ -428,7 +428,7 @@ static int __init H8606_init(void) printk(KERN_INFO "HV Sistemas H8606 board support by http://www.hvsistemas.com\n"); printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(h8606_devices, ARRAY_SIZE(h8606_devices)); -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif return 0; diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c index de44a3765e5..0ccf0cf4daa 100644 --- a/arch/blackfin/mach-bf533/boards/blackstamp.c +++ b/arch/blackfin/mach-bf533/boards/blackstamp.c @@ -20,6 +20,7 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/irq.h> +#include <linux/gpio.h> #include <linux/i2c.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> @@ -31,7 +32,7 @@ */ const char bfin_board_name[] = "BlackStamp"; -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, @@ -41,7 +42,7 @@ static struct platform_device rtc_device = { /* * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -74,7 +75,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -105,14 +106,14 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -125,7 +126,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -136,7 +137,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -146,7 +147,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { [0] = { @@ -184,7 +185,7 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -235,7 +236,7 @@ static struct platform_device bfin_uart0_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -264,7 +265,7 @@ static struct platform_device bfin_sir0_device = { #endif #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -335,7 +336,7 @@ static struct platform_device bfin_sport1_uart_device = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -358,7 +359,7 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) +#if IS_ENABLED(CONFIG_I2C_GPIO) #include <linux/i2c-gpio.h> static struct i2c_gpio_platform_data i2c_gpio_data = { @@ -413,32 +414,32 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -447,11 +448,11 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) +#if IS_ENABLED(CONFIG_I2C_GPIO) &i2c_gpio_device, #endif }; @@ -469,7 +470,7 @@ static int __init blackstamp_init(void) if (ret < 0) return ret; -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) /* * setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC. * the bfin-async-map driver takes care of flipping between diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c index fe47e048c4e..4ef2fb0e48d 100644 --- a/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -15,7 +15,7 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/spi/mmc_spi.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) #include <linux/usb/isp1362.h> #endif #include <linux/irq.h> @@ -29,9 +29,9 @@ */ const char bfin_board_name[] = "Bluetechnix CM BF533"; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* all SPI peripherals info goes here */ -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -62,14 +62,14 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -82,7 +82,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -91,7 +91,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -140,14 +140,14 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -178,7 +178,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#if IS_ENABLED(CONFIG_SMSC911X) #include <linux/smsc911x.h> static struct resource smsc911x_resources[] = { @@ -212,7 +212,7 @@ static struct platform_device smsc911x_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -263,7 +263,7 @@ static struct platform_device bfin_uart0_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -292,7 +292,7 @@ static struct platform_device bfin_sir0_device = { #endif #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -363,7 +363,7 @@ static struct platform_device bfin_sport1_uart_device = { #endif #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) static struct resource isp1362_hcd_resources[] = { { .start = 0x20308000, @@ -403,7 +403,7 @@ static struct platform_device isp1362_hcd_device = { #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x20300000, @@ -426,7 +426,7 @@ static struct platform_device net2272_bfin_device = { -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition para_partitions[] = { { .name = "bootloader(nor)", @@ -495,19 +495,19 @@ static struct platform_device *cm_bf533_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -516,31 +516,31 @@ static struct platform_device *cm_bf533_devices[] __initdata = { #endif #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) &isp1362_hcd_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#if IS_ENABLED(CONFIG_SMSC911X) &smsc911x_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) ¶_flash_device, #endif }; @@ -549,7 +549,7 @@ static int __init cm_bf533_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf533_devices, ARRAY_SIZE(cm_bf533_devices)); -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif return 0; diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index 07811c209b9..3625e9eaa8a 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -14,7 +14,7 @@ #include <linux/mtd/physmap.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) #include <linux/usb/isp1362.h> #endif #include <linux/irq.h> @@ -29,7 +29,7 @@ */ const char bfin_board_name[] = "ADI BF533-EZKIT"; -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, @@ -40,7 +40,7 @@ static struct platform_device rtc_device = { * USB-LAN EzExtender board * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -72,7 +72,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition ezkit_partitions_a[] = { { .name = "bootloader(nor a)", @@ -138,7 +138,7 @@ static struct platform_device ezkit_flash_device_b = { }; #endif -#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE) +#if IS_ENABLED(CONFIG_MTD_PLATRAM) static struct platdata_mtd_ram sram_data_a = { .mapname = "Flash A SRAM", .bankwidth = 2, @@ -182,7 +182,7 @@ static struct platform_device sram_device_b = { }; #endif -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -214,7 +214,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -227,7 +227,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -235,7 +235,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 4, }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -245,7 +245,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { [0] = { @@ -283,7 +283,7 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -334,7 +334,7 @@ static struct platform_device bfin_uart0_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -363,7 +363,7 @@ static struct platform_device bfin_sir0_device = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -387,7 +387,7 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) +#if IS_ENABLED(CONFIG_I2C_GPIO) #include <linux/i2c-gpio.h> static struct i2c_gpio_platform_data i2c_gpio_data = { @@ -435,14 +435,14 @@ static struct platform_device bfin_dpmc = { }; static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_7393) { I2C_BOARD_INFO("bfin-adv7393", 0x2B), }, #endif }; -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) static struct platform_device bfin_i2s = { .name = "bfin-i2s", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -450,15 +450,7 @@ static struct platform_device bfin_i2s = { }; #endif -#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) -static struct platform_device bfin_tdm = { - .name = "bfin-tdm", - .id = CONFIG_SND_BF5XX_SPORT_NUM, - /* TODO: add platform data here */ -}; -#endif - -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) static struct platform_device bfin_ac97 = { .name = "bfin-ac97", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -470,57 +462,53 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &ezkit_flash_device_a, &ezkit_flash_device_b, #endif -#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE) +#if IS_ENABLED(CONFIG_MTD_PLATRAM) &sram_device_a, &sram_device_b, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) +#if IS_ENABLED(CONFIG_I2C_GPIO) &i2c_gpio_device, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) &bfin_i2s, #endif -#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) - &bfin_tdm, -#endif - -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) &bfin_ac97, #endif }; diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c index e303dae4e2d..39c8e8547b8 100644 --- a/arch/blackfin/mach-bf533/boards/ip0x.c +++ b/arch/blackfin/mach-bf533/boards/ip0x.c @@ -15,7 +15,7 @@ #include <linux/mtd/partitions.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) #include <linux/usb/isp1362.h> #endif #include <asm/irq.h> @@ -32,7 +32,7 @@ const char bfin_board_name[] = "IP04/IP08"; * Driver needs to know address, irq and flag pin. */ #if defined(CONFIG_BFIN532_IP0X) -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +#if IS_ENABLED(CONFIG_DM9000) #include <linux/dm9000.h> @@ -104,10 +104,10 @@ static struct platform_device dm9000_device2 = { #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* all SPI peripherals info goes here */ -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, /* if 1 - block!!! */ }; @@ -116,7 +116,7 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = { /* Notice: for blackfin, the speed_hz is the value of register * SPI_BAUD, not the real baudrate */ static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 2, @@ -142,7 +142,7 @@ static struct platform_device spi_bfin_master_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -193,7 +193,7 @@ static struct platform_device bfin_uart0_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -222,7 +222,7 @@ static struct platform_device bfin_sir0_device = { #endif #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) static struct resource isp1362_hcd_resources[] = { { .start = 0x20300000, @@ -264,29 +264,29 @@ static struct platform_device isp1362_hcd_device = { static struct platform_device *ip0x_devices[] __initdata = { #if defined(CONFIG_BFIN532_IP0X) -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +#if IS_ENABLED(CONFIG_DM9000) &dm9000_device1, &dm9000_device2, #endif #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &spi_bfin_master_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) &isp1362_hcd_device, #endif }; diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index 6fca8698bf3..6f4bac969bf 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -14,9 +14,10 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/spi/mmc_spi.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) #include <linux/usb/isp1362.h> #endif +#include <linux/gpio.h> #include <linux/irq.h> #include <linux/i2c.h> #include <asm/dma.h> @@ -30,7 +31,7 @@ */ const char bfin_board_name[] = "ADI BF533-STAMP"; -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, @@ -40,7 +41,7 @@ static struct platform_device rtc_device = { /* * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -73,7 +74,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x20300000, @@ -97,7 +98,7 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE) +#if IS_ENABLED(CONFIG_MTD_BFIN_ASYNC) static struct mtd_partition stamp_partitions[] = { { .name = "bootloader(nor)", @@ -147,7 +148,7 @@ static struct platform_device stamp_flash_device = { }; #endif -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -178,7 +179,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) #define MMC_SPI_CARD_DETECT_INT IRQ_PF5 static int bfin_mmc_spi_init(struct device *dev, irqreturn_t (*detect_int)(int, void *), void *data) @@ -206,7 +207,7 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -219,8 +220,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \ - defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) { .modalias = "ad1836", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -231,7 +231,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -239,7 +239,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 1, }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -252,7 +252,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { [0] = { @@ -290,7 +290,7 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -341,7 +341,7 @@ static struct platform_device bfin_uart0_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -370,7 +370,7 @@ static struct platform_device bfin_sir0_device = { #endif #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -441,7 +441,51 @@ static struct platform_device bfin_sport1_uart_device = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SPORT) +static struct resource bfin_sport0_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_TX, + .end = IRQ_SPORT0_TX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_SPORT0_TX, + .end = CH_SPORT0_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_SPORT0_RX, + .end = CH_SPORT0_RX, + .flags = IORESOURCE_DMA, + }, +}; +static struct platform_device bfin_sport0_device = { + .name = "bfin_sport_raw", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_resources), + .resource = bfin_sport0_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, + }, +}; +#endif + +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -464,7 +508,7 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) +#if IS_ENABLED(CONFIG_I2C_GPIO) #include <linux/i2c-gpio.h> static struct i2c_gpio_platform_data i2c_gpio_data = { @@ -485,29 +529,29 @@ static struct platform_device i2c_gpio_device = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE) +#if IS_ENABLED(CONFIG_JOYSTICK_AD7142) { I2C_BOARD_INFO("ad7142_joystick", 0x2C), .irq = 39, }, #endif -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, #endif -#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE) +#if IS_ENABLED(CONFIG_INPUT_PCF8574) { I2C_BOARD_INFO("pcf8574_keypad", 0x27), .irq = 39, }, #endif -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_7393) { I2C_BOARD_INFO("bfin-adv7393", 0x2B), }, #endif -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("ad5252", 0x2f), }, @@ -541,10 +585,8 @@ static struct platform_device bfin_dpmc = { }, }; -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \ - defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) \ - || defined(CONFIG_SND_BF5XX_AC97) || \ - defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) || \ + IS_ENABLED(CONFIG_SND_BF5XX_AC97) #include <asm/bfin_sport.h> @@ -596,31 +638,23 @@ static struct resource bfin_snd_resources[][4] = { }; #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) static struct platform_device bfin_i2s_pcm = { .name = "bfin-i2s-pcm-audio", .id = -1, }; #endif -#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) -static struct platform_device bfin_tdm_pcm = { - .name = "bfin-tdm-pcm-audio", - .id = -1, -}; -#endif - -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) static struct platform_device bfin_ac97_pcm = { .name = "bfin-ac97-pcm-audio", .id = -1, }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \ - || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) static const char * const ad1836_link[] = { - "bfin-tdm.0", + "bfin-i2s.0", "spi0.4", }; static struct platform_device bfin_ad1836_machine = { @@ -632,8 +666,7 @@ static struct platform_device bfin_ad1836_machine = { }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \ - defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311) static const unsigned ad73311_gpio[] = { GPIO_PF4, }; @@ -647,22 +680,21 @@ static struct platform_device bfin_ad73311_machine = { }; #endif -#if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_AD73311) static struct platform_device bfin_ad73311_codec_device = { .name = "ad73311", .id = -1, }; #endif -#if defined(CONFIG_SND_SOC_AD74111) || defined(CONFIG_SND_SOC_AD74111_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_AD74111) static struct platform_device bfin_ad74111_codec_device = { .name = "ad74111", .id = -1, }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_I2S) || \ - defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S) static struct platform_device bfin_i2s = { .name = "bfin-i2s", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -675,22 +707,7 @@ static struct platform_device bfin_i2s = { }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_TDM) || \ - defined(CONFIG_SND_BF5XX_SOC_TDM_MODULE) -static struct platform_device bfin_tdm = { - .name = "bfin-tdm", - .id = CONFIG_SND_BF5XX_SPORT_NUM, - .num_resources = - ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]), - .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM], - .dev = { - .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM], - }, -}; -#endif - -#if defined(CONFIG_SND_BF5XX_SOC_AC97) || \ - defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97) static struct platform_device bfin_ac97 = { .name = "bfin-ac97", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -707,36 +724,35 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || \ - defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -745,67 +761,54 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) +#if IS_ENABLED(CONFIG_I2C_GPIO) &i2c_gpio_device, #endif -#if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE) +#if IS_ENABLED(CONFIG_MTD_BFIN_ASYNC) &stamp_flash_device, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) &bfin_i2s_pcm, #endif -#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) - &bfin_tdm_pcm, -#endif - -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) &bfin_ac97_pcm, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \ - defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) &bfin_ad1836_machine, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \ - defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311) &bfin_ad73311_machine, #endif -#if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_AD73311) &bfin_ad73311_codec_device, #endif -#if defined(CONFIG_SND_SOC_AD74111) || defined(CONFIG_SND_SOC_AD74111_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_AD74111) &bfin_ad74111_codec_device, #endif -#if defined(CONFIG_SND_BF5XX_SOC_I2S) || \ - defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S) &bfin_i2s, #endif -#if defined(CONFIG_SND_BF5XX_SOC_TDM) || \ - defined(CONFIG_SND_BF5XX_SOC_TDM_MODULE) - &bfin_tdm, -#endif - -#if defined(CONFIG_SND_BF5XX_SOC_AC97) || \ - defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97) &bfin_ac97, #endif }; static int __init net2272_init(void) { -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) int ret; /* Set PF0 to 0, PF1 to 1 make /AMS3 work properly */ @@ -851,7 +854,7 @@ static int __init stamp_init(void) if (ret < 0) return ret; -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) /* * setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC. * the bfin-async-map driver takes care of flipping between diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h index 3a8f73a669f..0e754efc3cf 100644 --- a/arch/blackfin/mach-bf533/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h @@ -378,5 +378,6 @@ #define ANOMALY_05000474 (0) #define ANOMALY_05000480 (0) #define ANOMALY_05000485 (0) +#define ANOMALY_16000030 (0) #endif diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537e.c b/arch/blackfin/mach-bf537/boards/cm_bf537e.c index 85e4fc9f9c2..1e7290ef352 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537e.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537e.c @@ -16,11 +16,12 @@ #include <linux/mtd/physmap.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) #include <linux/usb/isp1362.h> #endif #include <linux/ata_platform.h> #include <linux/irq.h> +#include <linux/gpio.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <asm/portmux.h> @@ -32,10 +33,10 @@ */ const char bfin_board_name[] = "Bluetechnix CM BF537E"; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* all SPI peripherals info goes here */ -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -66,14 +67,14 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -86,7 +87,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -95,7 +96,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -144,7 +145,7 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN_SPORT) /* SPORT SPI controller data */ static struct bfin5xx_spi_master bfin_sport_spi0_info = { @@ -209,20 +210,20 @@ static struct platform_device bfin_sport_spi1_device = { #endif /* sport spi master and devices */ -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) +#if IS_ENABLED(CONFIG_FB_HITACHI_TX09) static struct platform_device hitachi_fb_device = { .name = "hitachi-tx09", }; #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -254,7 +255,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) static struct resource isp1362_hcd_resources[] = { { .start = 0x20308000, @@ -293,7 +294,7 @@ static struct platform_device isp1362_hcd_device = { }; #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x20300000, @@ -314,7 +315,7 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) +#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR) static struct mtd_partition cm_partitions[] = { { .name = "bootloader(nor)", @@ -363,7 +364,7 @@ static struct platform_device cm_flash_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -498,7 +499,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -551,7 +552,7 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; static struct resource bfin_twi0_resource[] = { @@ -578,14 +579,14 @@ static struct platform_device i2c_bfin_twi_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) \ -|| defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) \ +|| IS_ENABLED(CONFIG_BFIN_SPORT) unsigned short bfin_sport0_peripherals[] = { P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 }; #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -650,7 +651,7 @@ static struct platform_device bfin_sport1_uart_device = { }; #endif #endif -#if defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SPORT) static struct resource bfin_sport0_resources[] = { { .start = SPORT0_TCR1, @@ -694,7 +695,7 @@ static struct platform_device bfin_sport0_device = { }; #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_MII0; @@ -727,7 +728,7 @@ static struct platform_device bfin_mac_device = { }; #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) #define PATA_INT IRQ_PF14 static struct pata_platform_info bfin_pata_platform_data = { @@ -795,19 +796,19 @@ static struct platform_device *cm_bf537e_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SPORT) &bfin_sport0_device, #endif -#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) +#if IS_ENABLED(CONFIG_FB_HITACHI_TX09) &hitachi_fb_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -816,7 +817,7 @@ static struct platform_device *cm_bf537e_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -825,11 +826,11 @@ static struct platform_device *cm_bf537e_devices[] __initdata = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -838,44 +839,44 @@ static struct platform_device *cm_bf537e_devices[] __initdata = { #endif #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) &isp1362_hcd_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN_SPORT) &bfin_sport_spi0_device, &bfin_sport_spi1_device, #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) &bfin_pata_device, #endif -#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) +#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR) &cm_flash_device, #endif }; static int __init net2272_init(void) { -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) int ret; ret = gpio_request(GPIO_PG14, "net2272"); @@ -895,11 +896,11 @@ static int __init cm_bf537e_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf537e_devices, ARRAY_SIZE(cm_bf537e_devices)); -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN); #endif diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537u.c b/arch/blackfin/mach-bf537/boards/cm_bf537u.c index 0143d8bef90..c7495dc7469 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537u.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537u.c @@ -16,11 +16,12 @@ #include <linux/mtd/physmap.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) #include <linux/usb/isp1362.h> #endif #include <linux/ata_platform.h> #include <linux/irq.h> +#include <linux/gpio.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <asm/portmux.h> @@ -32,10 +33,10 @@ */ const char bfin_board_name[] = "Bluetechnix CM BF537U"; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* all SPI peripherals info goes here */ -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -66,14 +67,14 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -86,7 +87,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -95,7 +96,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -144,20 +145,20 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) +#if IS_ENABLED(CONFIG_FB_HITACHI_TX09) static struct platform_device hitachi_fb_device = { .name = "hitachi-tx09", }; #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -189,7 +190,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) static struct resource isp1362_hcd_resources[] = { { .start = 0x20308000, @@ -228,7 +229,7 @@ static struct platform_device isp1362_hcd_device = { }; #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x20200000, @@ -249,7 +250,7 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) +#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR) static struct mtd_partition cm_partitions[] = { { .name = "bootloader(nor)", @@ -298,7 +299,7 @@ static struct platform_device cm_flash_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -397,7 +398,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -450,7 +451,7 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; static struct resource bfin_twi0_resource[] = { @@ -477,7 +478,7 @@ static struct platform_device i2c_bfin_twi_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -548,7 +549,7 @@ static struct platform_device bfin_sport1_uart_device = { #endif #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_MII0; @@ -581,7 +582,7 @@ static struct platform_device bfin_mac_device = { }; #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) #define PATA_INT IRQ_PF14 static struct pata_platform_info bfin_pata_platform_data = { @@ -649,15 +650,15 @@ static struct platform_device *cm_bf537u_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) +#if IS_ENABLED(CONFIG_FB_HITACHI_TX09) &hitachi_fb_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -666,7 +667,7 @@ static struct platform_device *cm_bf537u_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -675,11 +676,11 @@ static struct platform_device *cm_bf537u_devices[] __initdata = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -688,39 +689,39 @@ static struct platform_device *cm_bf537u_devices[] __initdata = { #endif #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) &isp1362_hcd_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) &bfin_pata_device, #endif -#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) +#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR) &cm_flash_device, #endif }; static int __init net2272_init(void) { -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) int ret; ret = gpio_request(GPIO_PH15, driver_name); @@ -752,11 +753,11 @@ static int __init cm_bf537u_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf537u_devices, ARRAY_SIZE(cm_bf537u_devices)); -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN); #endif diff --git a/arch/blackfin/mach-bf537/boards/dnp5370.c b/arch/blackfin/mach-bf537/boards/dnp5370.c index 8bbf0a23fd4..e79b3b810c3 100644 --- a/arch/blackfin/mach-bf537/boards/dnp5370.c +++ b/arch/blackfin/mach-bf537/boards/dnp5370.c @@ -41,14 +41,14 @@ const char bfin_board_name[] = "DNP/5370"; #define FLASH_MAC 0x202f0000 #define CONFIG_MTD_PHYSMAP_LEN 0x300000 -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_RMII0; @@ -81,7 +81,7 @@ static struct platform_device bfin_mac_device = { }; #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition asmb_flash_partitions[] = { { .name = "bootloader(nor)", @@ -125,9 +125,9 @@ static struct platform_device asmb_flash_device = { }; #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, /* use no dma transfer with this chip*/ @@ -135,7 +135,7 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = { #endif -#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE) +#if IS_ENABLED(CONFIG_MTD_DATAFLASH) /* This mapping is for at45db642 it has 1056 page size, * partition size and offset should be page aligned */ @@ -166,7 +166,7 @@ static struct bfin5xx_spi_chip spi_dataflash_chip_info = { static struct spi_board_info bfin_spi_board_info[] __initdata = { /* SD/MMC card reader at SPI bus */ -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 20000000, @@ -178,7 +178,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif /* 8 Megabyte Atmel NOR flash chip at SPI bus */ -#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE) +#if IS_ENABLED(CONFIG_MTD_DATAFLASH) { .modalias = "mtd_dataflash", .max_speed_hz = 16700000, @@ -228,7 +228,7 @@ static struct platform_device spi_bfin_master_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -328,7 +328,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; static struct resource bfin_twi0_resource[] = { @@ -357,7 +357,7 @@ static struct platform_device i2c_bfin_twi_device = { static struct platform_device *dnp5370_devices[] __initdata = { -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -366,24 +366,24 @@ static struct platform_device *dnp5370_devices[] __initdata = { #endif #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &asmb_flash_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &spi_bfin_master_device, #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c index a10f90e444b..dd7bda07bf9 100644 --- a/arch/blackfin/mach-bf537/boards/minotaur.c +++ b/arch/blackfin/mach-bf537/boards/minotaur.c @@ -13,7 +13,7 @@ #include <linux/mtd/partitions.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) #include <linux/usb/isp1362.h> #endif #include <linux/ata_platform.h> @@ -31,7 +31,7 @@ */ const char bfin_board_name[] = "CamSig Minotaur BF537"; -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) static struct resource bfin_pcmcia_cf_resources[] = { { .start = 0x20310000, /* IO PORT */ @@ -60,14 +60,14 @@ static struct platform_device bfin_pcmcia_cf_device = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_MII0; @@ -100,7 +100,7 @@ static struct platform_device bfin_mac_device = { }; #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x20300000, @@ -121,11 +121,10 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* all SPI peripherals info goes here */ -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) /* Partition sizes */ #define FLASH_SIZE 0x00400000 @@ -162,15 +161,14 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -183,7 +181,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ @@ -231,7 +229,7 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -330,7 +328,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -385,7 +383,7 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; static struct resource bfin_twi0_resource[] = { @@ -412,7 +410,7 @@ static struct platform_device i2c_bfin_twi_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -484,28 +482,28 @@ static struct platform_device bfin_sport1_uart_device = { #endif static struct platform_device *minotaur_devices[] __initdata = { -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) &bfin_pcmcia_cf_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -514,7 +512,7 @@ static struct platform_device *minotaur_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -523,11 +521,11 @@ static struct platform_device *minotaur_devices[] __initdata = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -542,7 +540,7 @@ static int __init minotaur_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(minotaur_devices, ARRAY_SIZE(minotaur_devices)); -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index 6b395510405..06a50ddb54c 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -30,7 +30,7 @@ const char bfin_board_name[] = "ADI PNAV-1.0"; * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) static struct resource bfin_pcmcia_cf_resources[] = { { .start = 0x20310000, /* IO PORT */ @@ -59,14 +59,14 @@ static struct platform_device bfin_pcmcia_cf_device = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -99,7 +99,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_RMII0; @@ -132,7 +132,7 @@ static struct platform_device bfin_mac_device = { }; #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x20300000, @@ -153,11 +153,10 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* all SPI peripherals info goes here */ -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -188,13 +187,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -211,8 +210,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -225,8 +223,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ - || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -234,7 +231,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 4, }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ @@ -244,7 +241,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, @@ -294,13 +291,13 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) +#if IS_ENABLED(CONFIG_FB_BF537_LQ035) static struct platform_device bfin_fb_device = { .name = "bf537-lq035", }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -399,7 +396,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -455,36 +452,36 @@ static struct platform_device bfin_sir1_device = { #endif static struct platform_device *stamp_devices[] __initdata = { -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) &bfin_pcmcia_cf_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) +#if IS_ENABLED(CONFIG_FB_BF537_LQ035) &bfin_fb_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -493,7 +490,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -507,7 +504,7 @@ static int __init pnav_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 95114ed395a..de19b8a5600 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -18,7 +18,7 @@ #include <linux/mtd/physmap.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) #include <linux/usb/isp1362.h> #endif #include <linux/i2c.h> @@ -53,7 +53,7 @@ const char bfin_board_name[] = "ADI BF537-STAMP"; * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) #include <linux/usb/isp1760.h> static struct resource bfin_isp1760_resources[] = { [0] = { @@ -88,7 +88,7 @@ static struct platform_device bfin_isp1760_device = { }; #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/gpio_keys.h> static struct gpio_keys_button bfin_gpio_keys_table[] = { @@ -111,7 +111,7 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) static struct resource bfin_pcmcia_cf_resources[] = { { .start = 0x20310000, /* IO PORT */ @@ -140,14 +140,14 @@ static struct platform_device bfin_pcmcia_cf_device = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -180,7 +180,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +#if IS_ENABLED(CONFIG_DM9000) static struct resource dm9000_resources[] = { [0] = { .start = 0x203FB800, @@ -207,7 +207,7 @@ static struct platform_device dm9000_device = { }; #endif -#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_SL811_HCD) static struct resource sl811_hcd_resources[] = { { .start = 0x20340000, @@ -251,7 +251,7 @@ static struct platform_device sl811_hcd_device = { }; #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) static struct resource isp1362_hcd_resources[] = { { .start = 0x20360000, @@ -290,7 +290,7 @@ static struct platform_device isp1362_hcd_device = { }; #endif -#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) +#if IS_ENABLED(CONFIG_CAN_BFIN) static unsigned short bfin_can_peripherals[] = { P_CAN0_RX, P_CAN0_TX, 0 }; @@ -328,7 +328,7 @@ static struct platform_device bfin_can_device = { }; #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_MII0; @@ -361,7 +361,7 @@ static struct platform_device bfin_mac_device = { }; #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x20300000, @@ -385,7 +385,7 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM) const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL }; static struct mtd_partition bfin_plat_nand_partitions[] = { @@ -455,12 +455,13 @@ static struct platform_device bfin_async_nand_device = { static void bfin_plat_nand_init(void) { gpio_request(BFIN_NAND_PLAT_READY, "bfin_nand_plat"); + gpio_direction_input(BFIN_NAND_PLAT_READY); } #else static void bfin_plat_nand_init(void) {} #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition stamp_partitions[] = { { .name = "bootloader(nor)", @@ -508,8 +509,7 @@ static struct platform_device stamp_flash_device = { }; #endif -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -540,7 +540,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE) +#if IS_ENABLED(CONFIG_INPUT_AD714X_SPI) #include <linux/input/ad714x.h> static struct ad714x_slider_plat ad7147_spi_slider_plat[] = { @@ -601,7 +601,7 @@ static struct ad714x_platform_data ad7147_spi_platform_data = { }; #endif -#if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE) +#if IS_ENABLED(CONFIG_INPUT_AD714X_I2C) #include <linux/input/ad714x.h> static struct ad714x_button_plat ad7142_i2c_button_plat[] = { { @@ -648,24 +648,24 @@ static struct ad714x_platform_data ad7142_i2c_platform_data = { }; #endif -#if defined(CONFIG_AD2S90) || defined(CONFIG_AD2S90_MODULE) +#if IS_ENABLED(CONFIG_AD2S90) static struct bfin5xx_spi_chip ad2s90_spi_chip_info = { .enable_dma = 0, }; #endif -#if defined(CONFIG_AD2S120X) || defined(CONFIG_AD2S120X_MODULE) -static unsigned short ad2s120x_platform_data[] = { +#if IS_ENABLED(CONFIG_AD2S1200) +static unsigned short ad2s1200_platform_data[] = { /* used as SAMPLE and RDVEL */ GPIO_PF5, GPIO_PF6, 0 }; -static struct bfin5xx_spi_chip ad2s120x_spi_chip_info = { +static struct bfin5xx_spi_chip ad2s1200_spi_chip_info = { .enable_dma = 0, }; #endif -#if defined(CONFIG_AD2S1210) || defined(CONFIG_AD2S1210_MODULE) +#if IS_ENABLED(CONFIG_AD2S1210) static unsigned short ad2s1210_platform_data[] = { /* use as SAMPLE, A0, A1 */ GPIO_PF7, GPIO_PF8, GPIO_PF9, @@ -681,13 +681,13 @@ static struct bfin5xx_spi_chip ad2s1210_spi_chip_info = { }; #endif -#if defined(CONFIG_AD7314) || defined(CONFIG_AD7314_MODULE) +#if IS_ENABLED(CONFIG_SENSORS_AD7314) static struct bfin5xx_spi_chip ad7314_spi_chip_info = { .enable_dma = 0, }; #endif -#if defined(CONFIG_AD7816) || defined(CONFIG_AD7816_MODULE) +#if IS_ENABLED(CONFIG_AD7816) static unsigned short ad7816_platform_data[] = { GPIO_PF4, /* rdwr_pin */ GPIO_PF5, /* convert_pin */ @@ -700,7 +700,7 @@ static struct bfin5xx_spi_chip ad7816_spi_chip_info = { }; #endif -#if defined(CONFIG_ADT7310) || defined(CONFIG_ADT7310_MODULE) +#if IS_ENABLED(CONFIG_ADT7310) static unsigned long adt7310_platform_data[3] = { /* INT bound temperature alarm event. line 1 */ IRQ_PG4, IRQF_TRIGGER_LOW, @@ -713,14 +713,14 @@ static struct bfin5xx_spi_chip adt7310_spi_chip_info = { }; #endif -#if defined(CONFIG_AD7298) || defined(CONFIG_AD7298_MODULE) +#if IS_ENABLED(CONFIG_AD7298) static unsigned short ad7298_platform_data[] = { GPIO_PF7, /* busy_pin */ 0, }; #endif -#if defined(CONFIG_ADT7316_SPI) || defined(CONFIG_ADT7316_SPI_MODULE) +#if IS_ENABLED(CONFIG_ADT7316_SPI) static unsigned long adt7316_spi_data[2] = { IRQF_TRIGGER_LOW, /* interrupt flags */ GPIO_PF7, /* ldac_pin, 0 means DAC/LDAC registers control DAC update */ @@ -731,7 +731,7 @@ static struct bfin5xx_spi_chip adt7316_spi_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) #define MMC_SPI_CARD_DETECT_INT IRQ_PF5 static int bfin_mmc_spi_init(struct device *dev, @@ -758,7 +758,7 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = { }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) #include <linux/spi/ad7877.h> static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, @@ -775,7 +775,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879) #include <linux/spi/ad7879.h> static const struct ad7879_platform_data bfin_ad7879_ts_info = { .model = 7879, /* Model = AD7879 */ @@ -792,7 +792,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = { }; #endif -#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE) +#if IS_ENABLED(CONFIG_INPUT_ADXL34X) #include <linux/input/adxl34x.h> static const struct adxl34x_platform_data adxl34x_info = { .x_axis_offset = 0, @@ -831,13 +831,13 @@ static const struct adxl34x_platform_data adxl34x_info = { }; #endif -#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE) +#if IS_ENABLED(CONFIG_ENC28J60) static struct bfin5xx_spi_chip enc28j60_spi_chip_info = { .enable_dma = 1, }; #endif -#if defined(CONFIG_ADF702X) || defined(CONFIG_ADF702X_MODULE) +#if IS_ENABLED(CONFIG_ADF702X) #include <linux/spi/adf702x.h> #define TXREG 0x0160A470 static const u32 adf7021_regs[] = { @@ -879,7 +879,7 @@ static inline void adf702x_mac_init(void) static inline void adf702x_mac_init(void) {} #endif -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_ADS7846) #include <linux/spi/ads7846.h> static int ads7873_get_pendown_state(void) { @@ -898,8 +898,7 @@ static struct ads7846_platform_data __initdata ad7873_pdata = { }; #endif -#if defined(CONFIG_MTD_DATAFLASH) \ - || defined(CONFIG_MTD_DATAFLASH_MODULE) +#if IS_ENABLED(CONFIG_MTD_DATAFLASH) static struct mtd_partition bfin_spi_dataflash_partitions[] = { { @@ -930,15 +929,14 @@ static struct bfin5xx_spi_chip data_flash_chip_info = { }; #endif -#if defined(CONFIG_AD7476) || defined(CONFIG_AD7476_MODULE) +#if IS_ENABLED(CONFIG_AD7476) static struct bfin5xx_spi_chip spi_ad7476_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ }; #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -950,8 +948,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_MTD_DATAFLASH) \ - || defined(CONFIG_MTD_DATAFLASH_MODULE) +#if IS_ENABLED(CONFIG_MTD_DATAFLASH) { /* DataFlash chip */ .modalias = "mtd_dataflash", .max_speed_hz = 33250000, /* max spi clock (SCK) speed in HZ */ @@ -963,8 +960,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \ - || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) { .modalias = "ad1836", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -985,7 +981,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_SOC_ADAV80X) || defined(CONFIG_SND_SOC_ADV80X_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_ADAV80X) { .modalias = "adav801", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -995,7 +991,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE) +#if IS_ENABLED(CONFIG_INPUT_AD714X_SPI) { .modalias = "ad714x_captouch", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1007,7 +1003,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_AD2S90) || defined(CONFIG_AD2S90_MODULE) +#if IS_ENABLED(CONFIG_AD2S90) { .modalias = "ad2s90", .bus_num = 0, @@ -1018,17 +1014,17 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_AD2S120X) || defined(CONFIG_AD2S120X_MODULE) +#if IS_ENABLED(CONFIG_AD2S1200) { - .modalias = "ad2s120x", + .modalias = "ad2s1200", .bus_num = 0, .chip_select = 4, /* CS, change it for your board */ - .platform_data = ad2s120x_platform_data, - .controller_data = &ad2s120x_spi_chip_info, + .platform_data = ad2s1200_platform_data, + .controller_data = &ad2s1200_spi_chip_info, }, #endif -#if defined(CONFIG_AD2S1210) || defined(CONFIG_AD2S1210_MODULE) +#if IS_ENABLED(CONFIG_AD2S1210) { .modalias = "ad2s1210", .max_speed_hz = 8192000, @@ -1039,7 +1035,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_AD7314) || defined(CONFIG_AD7314_MODULE) +#if IS_ENABLED(CONFIG_SENSORS_AD7314) { .modalias = "ad7314", .max_speed_hz = 1000000, @@ -1050,7 +1046,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_AD7816) || defined(CONFIG_AD7816_MODULE) +#if IS_ENABLED(CONFIG_AD7816) { .modalias = "ad7818", .max_speed_hz = 1000000, @@ -1062,7 +1058,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_ADT7310) || defined(CONFIG_ADT7310_MODULE) +#if IS_ENABLED(CONFIG_ADT7310) { .modalias = "adt7310", .max_speed_hz = 1000000, @@ -1075,7 +1071,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_AD7298) || defined(CONFIG_AD7298_MODULE) +#if IS_ENABLED(CONFIG_AD7298) { .modalias = "ad7298", .max_speed_hz = 1000000, @@ -1086,7 +1082,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_ADT7316_SPI) || defined(CONFIG_ADT7316_SPI_MODULE) +#if IS_ENABLED(CONFIG_ADT7316_SPI) { .modalias = "adt7316", .max_speed_hz = 1000000, @@ -1099,7 +1095,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -1110,7 +1106,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, @@ -1120,7 +1116,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 1, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI) { .modalias = "ad7879", .platform_data = &bfin_ad7879_ts_info, @@ -1131,7 +1127,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_CPHA | SPI_CPOL, }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -1139,7 +1135,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 1, }, #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) { .modalias = "bfin-lq035q1-spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -1148,7 +1144,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_CPHA | SPI_CPOL, }, #endif -#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE) +#if IS_ENABLED(CONFIG_ENC28J60) { .modalias = "enc28j60", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -1159,7 +1155,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_0, }, #endif -#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE) +#if IS_ENABLED(CONFIG_INPUT_ADXL34X_SPI) { .modalias = "adxl34x", .platform_data = &adxl34x_info, @@ -1170,7 +1166,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_ADF702X) || defined(CONFIG_ADF702X_MODULE) +#if IS_ENABLED(CONFIG_ADF702X) { .modalias = "adf702x", .max_speed_hz = 16000000, /* max spi clock (SCK) speed in HZ */ @@ -1180,7 +1176,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_0, }, #endif -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_ADS7846) { .modalias = "ads7846", .max_speed_hz = 2000000, /* max spi clock (SCK) speed in HZ */ @@ -1191,8 +1187,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_0, }, #endif -#if defined(CONFIG_AD7476) \ - || defined(CONFIG_AD7476_MODULE) +#if IS_ENABLED(CONFIG_AD7476) { .modalias = "ad7476", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ @@ -1203,8 +1198,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_ADE7753) \ - || defined(CONFIG_ADE7753_MODULE) +#if IS_ENABLED(CONFIG_ADE7753) { .modalias = "ade7753", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1214,8 +1208,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_1, }, #endif -#if defined(CONFIG_ADE7754) \ - || defined(CONFIG_ADE7754_MODULE) +#if IS_ENABLED(CONFIG_ADE7754) { .modalias = "ade7754", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1225,8 +1218,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_1, }, #endif -#if defined(CONFIG_ADE7758) \ - || defined(CONFIG_ADE7758_MODULE) +#if IS_ENABLED(CONFIG_ADE7758) { .modalias = "ade7758", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1236,8 +1228,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_1, }, #endif -#if defined(CONFIG_ADE7759) \ - || defined(CONFIG_ADE7759_MODULE) +#if IS_ENABLED(CONFIG_ADE7759) { .modalias = "ade7759", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1247,8 +1238,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_1, }, #endif -#if defined(CONFIG_ADE7854_SPI) \ - || defined(CONFIG_ADE7854_SPI_MODULE) +#if IS_ENABLED(CONFIG_ADE7854_SPI) { .modalias = "ade7854", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1258,8 +1248,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_ADIS16060) \ - || defined(CONFIG_ADIS16060_MODULE) +#if IS_ENABLED(CONFIG_ADIS16060) { .modalias = "adis16060_r", .max_speed_hz = 2900000, /* max spi clock (SCK) speed in HZ */ @@ -1277,8 +1266,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_1, }, #endif -#if defined(CONFIG_ADIS16130) \ - || defined(CONFIG_ADIS16130_MODULE) +#if IS_ENABLED(CONFIG_ADIS16130) { .modalias = "adis16130", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1288,8 +1276,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_ADIS16201) \ - || defined(CONFIG_ADIS16201_MODULE) +#if IS_ENABLED(CONFIG_ADIS16201) { .modalias = "adis16201", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1300,8 +1287,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .irq = IRQ_PF4, }, #endif -#if defined(CONFIG_ADIS16203) \ - || defined(CONFIG_ADIS16203_MODULE) +#if IS_ENABLED(CONFIG_ADIS16203) { .modalias = "adis16203", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1312,8 +1298,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .irq = IRQ_PF4, }, #endif -#if defined(CONFIG_ADIS16204) \ - || defined(CONFIG_ADIS16204_MODULE) +#if IS_ENABLED(CONFIG_ADIS16204) { .modalias = "adis16204", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1324,8 +1309,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .irq = IRQ_PF4, }, #endif -#if defined(CONFIG_ADIS16209) \ - || defined(CONFIG_ADIS16209_MODULE) +#if IS_ENABLED(CONFIG_ADIS16209) { .modalias = "adis16209", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1336,8 +1320,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .irq = IRQ_PF4, }, #endif -#if defined(CONFIG_ADIS16220) \ - || defined(CONFIG_ADIS16220_MODULE) +#if IS_ENABLED(CONFIG_ADIS16220) { .modalias = "adis16220", .max_speed_hz = 2000000, /* max spi clock (SCK) speed in HZ */ @@ -1348,8 +1331,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .irq = IRQ_PF4, }, #endif -#if defined(CONFIG_ADIS16240) \ - || defined(CONFIG_ADIS16240_MODULE) +#if IS_ENABLED(CONFIG_ADIS16240) { .modalias = "adis16240", .max_speed_hz = 1500000, /* max spi clock (SCK) speed in HZ */ @@ -1360,8 +1342,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .irq = IRQ_PF4, }, #endif -#if defined(CONFIG_ADIS16260) \ - || defined(CONFIG_ADIS16260_MODULE) +#if IS_ENABLED(CONFIG_ADIS16260) { .modalias = "adis16260", .max_speed_hz = 1500000, /* max spi clock (SCK) speed in HZ */ @@ -1372,8 +1353,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .irq = IRQ_PF4, }, #endif -#if defined(CONFIG_ADIS16261) \ - || defined(CONFIG_ADIS16261_MODULE) +#if IS_ENABLED(CONFIG_ADIS16261) { .modalias = "adis16261", .max_speed_hz = 2500000, /* max spi clock (SCK) speed in HZ */ @@ -1383,8 +1363,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_ADIS16300) \ - || defined(CONFIG_ADIS16300_MODULE) +#if IS_ENABLED(CONFIG_ADIS16300) { .modalias = "adis16300", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1395,8 +1374,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .irq = IRQ_PF4, }, #endif -#if defined(CONFIG_ADIS16350) \ - || defined(CONFIG_ADIS16350_MODULE) +#if IS_ENABLED(CONFIG_ADIS16350) { .modalias = "adis16364", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1407,8 +1385,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .irq = IRQ_PF4, }, #endif -#if defined(CONFIG_ADIS16400) \ - || defined(CONFIG_ADIS16400_MODULE) +#if IS_ENABLED(CONFIG_ADIS16400) { .modalias = "adis16400", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1420,7 +1397,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI controller data */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, @@ -1458,7 +1435,7 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN_SPORT) /* SPORT SPI controller data */ static struct bfin5xx_spi_master bfin_sport_spi0_info = { @@ -1523,13 +1500,13 @@ static struct platform_device bfin_sport_spi1_device = { #endif /* sport spi master and devices */ -#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) +#if IS_ENABLED(CONFIG_FB_BF537_LQ035) static struct platform_device bfin_fb_device = { .name = "bf537_lq035", }; #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) #include <asm/bfin-lq035q1.h> static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = { @@ -1558,8 +1535,7 @@ static struct platform_device bfin_lq035q1_device = { }; #endif -#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \ - || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE) #include <linux/videodev2.h> #include <media/blackfin/bfin_capture.h> #include <media/blackfin/ppi.h> @@ -1579,8 +1555,7 @@ static const struct ppi_info ppi_info = { .pin_req = ppi_req, }; -#if defined(CONFIG_VIDEO_VS6624) \ - || defined(CONFIG_VIDEO_VS6624_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_VS6624) static struct v4l2_input vs6624_inputs[] = { { .index = 0, @@ -1623,7 +1598,7 @@ static struct platform_device bfin_capture_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -1734,7 +1709,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -1789,7 +1764,7 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; static struct resource bfin_twi0_resource[] = { @@ -1816,7 +1791,7 @@ static struct platform_device i2c_bfin_twi_device = { }; #endif -#if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_ADP5588) static const unsigned short adp5588_keymap[ADP5588_KEYMAPSIZE] = { [0] = KEY_GRAVE, [1] = KEY_1, @@ -1901,7 +1876,7 @@ static struct adp5588_kpad_platform_data adp5588_kpad_data = { }; #endif -#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE) +#if IS_ENABLED(CONFIG_PMIC_ADP5520) #include <linux/mfd/adp5520.h> /* @@ -2012,14 +1987,14 @@ static struct adp5520_platform_data adp5520_pdev_data = { #endif -#if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE) +#if IS_ENABLED(CONFIG_GPIO_ADP5588) static struct adp5588_gpio_platform_data adp5588_gpio_data = { .gpio_start = 50, .pullup_dis_mask = 0, }; #endif -#if defined(CONFIG_BACKLIGHT_ADP8870) || defined(CONFIG_BACKLIGHT_ADP8870_MODULE) +#if IS_ENABLED(CONFIG_BACKLIGHT_ADP8870) #include <linux/i2c/adp8870.h> static struct led_info adp8870_leds[] = { { @@ -2071,7 +2046,7 @@ static struct adp8870_backlight_platform_data adp8870_pdata = { }; #endif -#if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE) +#if IS_ENABLED(CONFIG_BACKLIGHT_ADP8860) #include <linux/i2c/adp8860.h> static struct led_info adp8860_leds[] = { { @@ -2113,7 +2088,7 @@ static struct adp8860_backlight_platform_data adp8860_pdata = { }; #endif -#if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE) +#if IS_ENABLED(CONFIG_REGULATOR_AD5398) static struct regulator_consumer_supply ad5398_consumer = { .supply = "current", }; @@ -2128,8 +2103,7 @@ static struct regulator_init_data ad5398_regulator_data = { .consumer_supplies = &ad5398_consumer, }; -#if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \ - defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE) +#if IS_ENABLED(CONFIG_REGULATOR_VIRTUAL_CONSUMER) static struct platform_device ad5398_virt_consumer_device = { .name = "reg-virt-consumer", .id = 0, @@ -2138,8 +2112,7 @@ static struct platform_device ad5398_virt_consumer_device = { }, }; #endif -#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \ - defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE) +#if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER) static struct regulator_bulk_data ad5398_bulk_data = { .supply = "current", }; @@ -2160,14 +2133,14 @@ static struct platform_device ad5398_userspace_consumer_device = { #endif #endif -#if defined(CONFIG_ADT7410) || defined(CONFIG_ADT7410_MODULE) +#if IS_ENABLED(CONFIG_ADT7410) /* INT bound temperature alarm event. line 1 */ static unsigned long adt7410_platform_data[2] = { IRQ_PG4, IRQF_TRIGGER_LOW, }; #endif -#if defined(CONFIG_ADT7316_I2C) || defined(CONFIG_ADT7316_I2C_MODULE) +#if IS_ENABLED(CONFIG_ADT7316_I2C) /* INT bound temperature alarm event. line 1 */ static unsigned long adt7316_i2c_data[2] = { IRQF_TRIGGER_LOW, /* interrupt flags */ @@ -2182,13 +2155,13 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif -#if defined(CONFIG_SND_SOC_ADAV80X) || defined(CONFIG_SND_SOC_ADAV80X_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_ADAV80X) { I2C_BOARD_INFO("adav803", 0x10), }, #endif -#if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE) +#if IS_ENABLED(CONFIG_INPUT_AD714X_I2C) { I2C_BOARD_INFO("ad7142_captouch", 0x2C), .irq = IRQ_PG5, @@ -2196,39 +2169,39 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif -#if defined(CONFIG_AD7150) || defined(CONFIG_AD7150_MODULE) +#if IS_ENABLED(CONFIG_AD7150) { I2C_BOARD_INFO("ad7150", 0x48), .irq = IRQ_PG5, /* fixme: use real interrupt number */ }, #endif -#if defined(CONFIG_AD7152) || defined(CONFIG_AD7152_MODULE) +#if IS_ENABLED(CONFIG_AD7152) { I2C_BOARD_INFO("ad7152", 0x48), }, #endif -#if defined(CONFIG_AD774X) || defined(CONFIG_AD774X_MODULE) +#if IS_ENABLED(CONFIG_AD774X) { I2C_BOARD_INFO("ad774x", 0x48), }, #endif -#if defined(CONFIG_ADE7854_I2C) || defined(CONFIG_ADE7854_I2C_MODULE) +#if IS_ENABLED(CONFIG_ADE7854_I2C) { I2C_BOARD_INFO("ade7854", 0x38), }, #endif -#if defined(CONFIG_ADT75) || defined(CONFIG_ADT75_MODULE) +#if IS_ENABLED(CONFIG_SENSORS_LM75) { I2C_BOARD_INFO("adt75", 0x9), .irq = IRQ_PG5, }, #endif -#if defined(CONFIG_ADT7410) || defined(CONFIG_ADT7410_MODULE) +#if IS_ENABLED(CONFIG_ADT7410) { I2C_BOARD_INFO("adt7410", 0x48), /* CT critical temperature event. line 0 */ @@ -2237,14 +2210,14 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif -#if defined(CONFIG_AD7291) || defined(CONFIG_AD7291_MODULE) +#if IS_ENABLED(CONFIG_AD7291) { I2C_BOARD_INFO("ad7291", 0x20), .irq = IRQ_PG5, }, #endif -#if defined(CONFIG_ADT7316_I2C) || defined(CONFIG_ADT7316_I2C_MODULE) +#if IS_ENABLED(CONFIG_ADT7316_I2C) { I2C_BOARD_INFO("adt7316", 0x48), .irq = IRQ_PG6, @@ -2252,128 +2225,128 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, #endif -#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE) +#if IS_ENABLED(CONFIG_INPUT_PCF8574) { I2C_BOARD_INFO("pcf8574_keypad", 0x27), .irq = IRQ_PG6, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_I2C) { I2C_BOARD_INFO("ad7879", 0x2F), .irq = IRQ_PG5, .platform_data = (void *)&bfin_ad7879_ts_info, }, #endif -#if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_ADP5588) { I2C_BOARD_INFO("adp5588-keys", 0x34), .irq = IRQ_PG0, .platform_data = (void *)&adp5588_kpad_data, }, #endif -#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE) +#if IS_ENABLED(CONFIG_PMIC_ADP5520) { I2C_BOARD_INFO("pmic-adp5520", 0x32), .irq = IRQ_PG0, .platform_data = (void *)&adp5520_pdev_data, }, #endif -#if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE) +#if IS_ENABLED(CONFIG_INPUT_ADXL34X_I2C) { I2C_BOARD_INFO("adxl34x", 0x53), .irq = IRQ_PG3, .platform_data = (void *)&adxl34x_info, }, #endif -#if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE) +#if IS_ENABLED(CONFIG_GPIO_ADP5588) { I2C_BOARD_INFO("adp5588-gpio", 0x34), .platform_data = (void *)&adp5588_gpio_data, }, #endif -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_7393) { I2C_BOARD_INFO("bfin-adv7393", 0x2B), }, #endif -#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) +#if IS_ENABLED(CONFIG_FB_BF537_LQ035) { I2C_BOARD_INFO("bf537-lq035-ad5280", 0x2F), }, #endif -#if defined(CONFIG_BACKLIGHT_ADP8870) || defined(CONFIG_BACKLIGHT_ADP8870_MODULE) +#if IS_ENABLED(CONFIG_BACKLIGHT_ADP8870) { I2C_BOARD_INFO("adp8870", 0x2B), .platform_data = (void *)&adp8870_pdata, }, #endif -#if defined(CONFIG_SND_SOC_ADAU1371) || defined(CONFIG_SND_SOC_ADAU1371_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_ADAU1371) { I2C_BOARD_INFO("adau1371", 0x1A), }, #endif -#if defined(CONFIG_SND_SOC_ADAU1761) || defined(CONFIG_SND_SOC_ADAU1761_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_ADAU1761) { I2C_BOARD_INFO("adau1761", 0x38), }, #endif -#if defined(CONFIG_SND_SOC_ADAU1361) || defined(CONFIG_SND_SOC_ADAU1361_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_ADAU1361) { I2C_BOARD_INFO("adau1361", 0x38), }, #endif -#if defined(CONFIG_SND_SOC_ADAU1701) || defined(CONFIG_SND_SOC_ADAU1701_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_ADAU1701) { I2C_BOARD_INFO("adau1701", 0x34), }, #endif -#if defined(CONFIG_AD525X_DPOT) || defined(CONFIG_AD525X_DPOT_MODULE) +#if IS_ENABLED(CONFIG_AD525X_DPOT) { I2C_BOARD_INFO("ad5258", 0x18), }, #endif -#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_SSM2602) { I2C_BOARD_INFO("ssm2602", 0x1b), }, #endif -#if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE) +#if IS_ENABLED(CONFIG_REGULATOR_AD5398) { I2C_BOARD_INFO("ad5398", 0xC), .platform_data = (void *)&ad5398_regulator_data, }, #endif -#if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE) +#if IS_ENABLED(CONFIG_BACKLIGHT_ADP8860) { I2C_BOARD_INFO("adp8860", 0x2A), .platform_data = (void *)&adp8860_pdata, }, #endif -#if defined(CONFIG_SND_SOC_ADAU1373) || defined(CONFIG_SND_SOC_ADAU1373_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_ADAU1373) { I2C_BOARD_INFO("adau1373", 0x1A), }, #endif -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("ad5252", 0x2e), }, #endif }; -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) \ -|| defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) \ +|| IS_ENABLED(CONFIG_BFIN_SPORT) unsigned short bfin_sport0_peripherals[] = { P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 }; #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -2438,7 +2411,7 @@ static struct platform_device bfin_sport1_uart_device = { }; #endif #endif -#if defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SPORT) static struct resource bfin_sport0_resources[] = { { .start = SPORT0_TCR1, @@ -2481,7 +2454,7 @@ static struct platform_device bfin_sport0_device = { }, }; #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) #define CF_IDE_NAND_CARD_USE_HDD_INTERFACE /* #define CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE */ @@ -2568,9 +2541,8 @@ static struct platform_device bfin_dpmc = { }, }; -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \ - defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) || \ - defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) || \ + IS_ENABLED(CONFIG_SND_BF5XX_AC97) #define SPORT_REQ(x) \ [x] = {P_SPORT##x##_TFS, P_SPORT##x##_DTPRI, P_SPORT##x##_TSCLK, \ @@ -2620,31 +2592,23 @@ static struct resource bfin_snd_resources[][4] = { }; #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) static struct platform_device bfin_i2s_pcm = { .name = "bfin-i2s-pcm-audio", .id = -1, }; #endif -#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) -static struct platform_device bfin_tdm_pcm = { - .name = "bfin-tdm-pcm-audio", - .id = -1, -}; -#endif - -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) static struct platform_device bfin_ac97_pcm = { .name = "bfin-ac97-pcm-audio", .id = -1, }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \ - || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) static const char * const ad1836_link[] = { - "bfin-tdm.0", + "bfin-i2s.0", "spi0.4", }; static struct platform_device bfin_ad1836_machine = { @@ -2656,8 +2620,7 @@ static struct platform_device bfin_ad1836_machine = { }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \ - defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311) static const unsigned ad73311_gpio[] = { GPIO_PF4, }; @@ -2671,22 +2634,21 @@ static struct platform_device bfin_ad73311_machine = { }; #endif -#if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_AD73311) static struct platform_device bfin_ad73311_codec_device = { .name = "ad73311", .id = -1, }; #endif -#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) || \ - defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) static struct platform_device bfin_eval_adav801_device = { .name = "bfin-eval-adav801", .id = -1, }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_I2S) || defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S) static struct platform_device bfin_i2s = { .name = "bfin-i2s", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -2698,19 +2660,7 @@ static struct platform_device bfin_i2s = { }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_TDM) || defined(CONFIG_SND_BF5XX_SOC_TDM_MODULE) -static struct platform_device bfin_tdm = { - .name = "bfin-tdm", - .id = CONFIG_SND_BF5XX_SPORT_NUM, - .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]), - .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM], - .dev = { - .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM], - }, -}; -#endif - -#if defined(CONFIG_SND_BF5XX_SOC_AC97) || defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97) static struct platform_device bfin_ac97 = { .name = "bfin-ac97", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -2722,7 +2672,7 @@ static struct platform_device bfin_ac97 = { }; #endif -#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE) +#if IS_ENABLED(CONFIG_REGULATOR_FIXED_VOLTAGE) #define REGULATOR_ADP122 "adp122" #define REGULATOR_ADP122_UV 2500000 @@ -2760,8 +2710,7 @@ static struct platform_device adp_switch_device = { }, }; -#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \ - defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE) +#if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER) static struct regulator_bulk_data adp122_bulk_data = { .supply = REGULATOR_ADP122, }; @@ -2782,8 +2731,7 @@ static struct platform_device adp122_userspace_consumer_device = { #endif #endif -#if defined(CONFIG_IIO_GPIO_TRIGGER) || \ - defined(CONFIG_IIO_GPIO_TRIGGER_MODULE) +#if IS_ENABLED(CONFIG_IIO_GPIO_TRIGGER) static struct resource iio_gpio_trigger_resources[] = { [0] = { @@ -2800,15 +2748,13 @@ static struct platform_device iio_gpio_trigger = { }; #endif -#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) || \ - defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) static struct platform_device bf5xx_adau1373_device = { .name = "bfin-eval-adau1373", }; #endif -#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) || \ - defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) static struct platform_device bf5xx_adau1701_device = { .name = "bfin-eval-adau1701", }; @@ -2817,73 +2763,72 @@ static struct platform_device bf5xx_adau1701_device = { static struct platform_device *stamp_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SPORT) &bfin_sport0_device, #endif -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) &bfin_pcmcia_cf_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_SL811_HCD) &sl811_hcd_device, #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) &isp1362_hcd_device, #endif -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) &bfin_isp1760_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +#if IS_ENABLED(CONFIG_DM9000) &dm9000_device, #endif -#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) +#if IS_ENABLED(CONFIG_CAN_BFIN) &bfin_can_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN_SPORT) &bfin_sport_spi0_device, &bfin_sport_spi1_device, #endif -#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) +#if IS_ENABLED(CONFIG_FB_BF537_LQ035) &bfin_fb_device, #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) &bfin_lq035q1_device, #endif -#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \ - || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE) &bfin_capture_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -2892,7 +2837,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -2901,11 +2846,11 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -2914,103 +2859,86 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) &bfin_pata_device, #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM) &bfin_async_nand_device, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &stamp_flash_device, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) &bfin_i2s_pcm, #endif -#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) - &bfin_tdm_pcm, -#endif - -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) &bfin_ac97_pcm, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \ - defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) &bfin_ad1836_machine, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \ - defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311) &bfin_ad73311_machine, #endif -#if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_AD73311) &bfin_ad73311_codec_device, #endif -#if defined(CONFIG_SND_BF5XX_SOC_I2S) || defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S) &bfin_i2s, #endif -#if defined(CONFIG_SND_BF5XX_SOC_TDM) || defined(CONFIG_SND_BF5XX_SOC_TDM_MODULE) - &bfin_tdm, -#endif - -#if defined(CONFIG_SND_BF5XX_SOC_AC97) || defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97) &bfin_ac97, #endif -#if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE) -#if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \ - defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE) +#if IS_ENABLED(CONFIG_REGULATOR_AD5398) +#if IS_ENABLED(CONFIG_REGULATOR_VIRTUAL_CONSUMER) &ad5398_virt_consumer_device, #endif -#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \ - defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE) +#if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER) &ad5398_userspace_consumer_device, #endif #endif -#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE) +#if IS_ENABLED(CONFIG_REGULATOR_FIXED_VOLTAGE) &adp_switch_device, -#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \ - defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE) +#if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER) &adp122_userspace_consumer_device, #endif #endif -#if defined(CONFIG_IIO_GPIO_TRIGGER) || \ - defined(CONFIG_IIO_GPIO_TRIGGER_MODULE) +#if IS_ENABLED(CONFIG_IIO_GPIO_TRIGGER) &iio_gpio_trigger, #endif -#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) || \ - defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) &bf5xx_adau1373_device, #endif -#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) || \ - defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) &bf5xx_adau1701_device, #endif -#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) || \ - defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) &bfin_eval_adav801_device, #endif }; static int __init net2272_init(void) { -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) int ret; ret = gpio_request(GPIO_PF6, "net2272"); diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c index e285c367528..6b988ad653d 100644 --- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c @@ -16,11 +16,12 @@ #include <linux/mtd/physmap.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) #include <linux/usb/isp1362.h> #endif #include <linux/ata_platform.h> #include <linux/irq.h> +#include <linux/gpio.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <asm/portmux.h> @@ -32,10 +33,10 @@ */ const char bfin_board_name[] = "Bluetechnix TCM BF537"; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* all SPI peripherals info goes here */ -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -66,14 +67,14 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -86,7 +87,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -95,7 +96,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ @@ -144,20 +145,20 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) +#if IS_ENABLED(CONFIG_FB_HITACHI_TX09) static struct platform_device hitachi_fb_device = { .name = "hitachi-tx09", }; #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -189,7 +190,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) static struct resource isp1362_hcd_resources[] = { { .start = 0x20308000, @@ -228,7 +229,7 @@ static struct platform_device isp1362_hcd_device = { }; #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x20300000, @@ -249,7 +250,7 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) +#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR) static struct mtd_partition cm_partitions[] = { { .name = "bootloader(nor)", @@ -298,7 +299,7 @@ static struct platform_device cm_flash_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -397,7 +398,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -452,7 +453,7 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; static struct resource bfin_twi0_resource[] = { @@ -479,7 +480,7 @@ static struct platform_device i2c_bfin_twi_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -550,7 +551,7 @@ static struct platform_device bfin_sport1_uart_device = { #endif #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_MII0; @@ -583,7 +584,7 @@ static struct platform_device bfin_mac_device = { }; #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) #define PATA_INT IRQ_PF14 static struct pata_platform_info bfin_pata_platform_data = { @@ -651,15 +652,15 @@ static struct platform_device *cm_bf537_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) +#if IS_ENABLED(CONFIG_FB_HITACHI_TX09) &hitachi_fb_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -668,7 +669,7 @@ static struct platform_device *cm_bf537_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -677,11 +678,11 @@ static struct platform_device *cm_bf537_devices[] __initdata = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -690,39 +691,39 @@ static struct platform_device *cm_bf537_devices[] __initdata = { #endif #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) &isp1362_hcd_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) &bfin_pata_device, #endif -#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) +#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR) &cm_flash_device, #endif }; static int __init net2272_init(void) { -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) int ret; ret = gpio_request(GPIO_PG14, "net2272"); @@ -742,11 +743,11 @@ static int __init tcm_bf537_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices)); -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN); #endif diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h index df921269639..2bc70c5b941 100644 --- a/arch/blackfin/mach-bf537/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h @@ -236,5 +236,6 @@ #define ANOMALY_05000467 (0) #define ANOMALY_05000474 (0) #define ANOMALY_05000485 (0) +#define ANOMALY_16000030 (0) #endif diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c index a4fce0370c1..ae2fcbb0011 100644 --- a/arch/blackfin/mach-bf538/boards/ezkit.c +++ b/arch/blackfin/mach-bf538/boards/ezkit.c @@ -33,14 +33,14 @@ const char bfin_board_name[] = "ADI BF538-EZKIT"; */ -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif /* CONFIG_RTC_DRV_BFIN */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -199,7 +199,7 @@ static struct platform_device bfin_uart2_device = { #endif /* CONFIG_SERIAL_BFIN_UART2 */ #endif /* CONFIG_SERIAL_BFIN */ -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -277,7 +277,7 @@ static struct platform_device bfin_sir2_device = { #endif /* CONFIG_BFIN_SIR2 */ #endif /* CONFIG_BFIN_SIR */ -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -416,7 +416,7 @@ static struct platform_device bfin_sport3_uart_device = { #endif /* CONFIG_SERIAL_BFIN_SPORT3_UART */ #endif /* CONFIG_SERIAL_BFIN_SPORT */ -#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) +#if IS_ENABLED(CONFIG_CAN_BFIN) static unsigned short bfin_can_peripherals[] = { P_CAN0_RX, P_CAN0_TX, 0 }; @@ -458,7 +458,7 @@ static struct platform_device bfin_can_device = { * USB-LAN EzExtender board * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -490,10 +490,9 @@ static struct platform_device smc91x_device = { }; #endif /* CONFIG_SMC91X */ -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* all SPI peripherals info goes here */ -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) /* SPI flash chip (m25p16) */ static struct mtd_partition bfin_spi_flash_partitions[] = { { @@ -521,7 +520,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { #endif /* CONFIG_MTD_M25P80 */ #endif /* CONFIG_SPI_BFIN5XX */ -#if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879) #include <linux/spi/ad7879.h> static const struct ad7879_platform_data bfin_ad7879_ts_info = { .model = 7879, /* Model = AD7879 */ @@ -538,7 +537,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = { }; #endif /* CONFIG_TOUCHSCREEN_AD7879 */ -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) #include <asm/bfin-lq035q1.h> static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = { @@ -568,8 +567,7 @@ static struct platform_device bfin_lq035q1_device = { #endif /* CONFIG_FB_BFIN_LQ035Q1 */ static struct spi_board_info bf538_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -581,7 +579,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif /* CONFIG_MTD_M25P80 */ -#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI) { .modalias = "ad7879", .platform_data = &bfin_ad7879_ts_info, @@ -592,7 +590,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = { .mode = SPI_CPHA | SPI_CPOL, }, #endif /* CONFIG_TOUCHSCREEN_AD7879_SPI */ -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) { .modalias = "bfin-lq035q1-spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -601,7 +599,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = { .mode = SPI_CPHA | SPI_CPOL, }, #endif /* CONFIG_FB_BFIN_LQ035Q1 */ -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -717,7 +715,7 @@ static struct platform_device bf538_spi_master2 = { }, }; -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; static struct resource bfin_twi0_resource[] = { @@ -764,10 +762,9 @@ static struct platform_device i2c_bfin_twi1_device = { .num_resources = ARRAY_SIZE(bfin_twi1_resource), .resource = bfin_twi1_resource, }; -#endif /* CONFIG_BF542 */ #endif /* CONFIG_I2C_BLACKFIN_TWI */ -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/gpio_keys.h> static struct gpio_keys_button bfin_gpio_keys_table[] = { @@ -815,7 +812,7 @@ static struct platform_device bfin_dpmc = { }, }; -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition ezkit_partitions[] = { { .name = "bootloader(nor)", @@ -840,7 +837,7 @@ static struct physmap_flash_data ezkit_flash_data = { static struct resource ezkit_flash_resource = { .start = 0x20000000, -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) .end = 0x202fffff, #else .end = 0x203fffff, @@ -863,11 +860,11 @@ static struct platform_device *cm_bf538_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -879,18 +876,18 @@ static struct platform_device *cm_bf538_devices[] __initdata = { #endif #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bf538_spi_master0, &bf538_spi_master1, &bf538_spi_master2, #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi0_device, &i2c_bfin_twi1_device, #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -902,7 +899,7 @@ static struct platform_device *cm_bf538_devices[] __initdata = { #endif #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -917,23 +914,23 @@ static struct platform_device *cm_bf538_devices[] __initdata = { #endif #endif -#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) +#if IS_ENABLED(CONFIG_CAN_BFIN) &bfin_can_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) &bfin_lq035q1_device, #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &ezkit_flash_device, #endif }; @@ -943,7 +940,7 @@ static int __init ezkit_init(void) printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf538_devices, ARRAY_SIZE(cm_bf538_devices)); -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) spi_register_board_info(bf538_spi_board_info, ARRAY_SIZE(bf538_spi_board_info)); #endif diff --git a/arch/blackfin/mach-bf538/include/mach/anomaly.h b/arch/blackfin/mach-bf538/include/mach/anomaly.h index 318d922d11d..eaac26973f6 100644 --- a/arch/blackfin/mach-bf538/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf538/include/mach/anomaly.h @@ -210,5 +210,6 @@ #define ANOMALY_05000474 (0) #define ANOMALY_05000480 (0) #define ANOMALY_05000485 (0) +#define ANOMALY_16000030 (0) #endif diff --git a/arch/blackfin/mach-bf548/Kconfig b/arch/blackfin/mach-bf548/Kconfig index 94acb586832..334ec7b1218 100644 --- a/arch/blackfin/mach-bf548/Kconfig +++ b/arch/blackfin/mach-bf548/Kconfig @@ -377,40 +377,6 @@ config IRQ_PINT3 endmenu -comment "Pin Interrupt to Port Assignment" -menu "Assignment" - -config PINTx_REASSIGN - bool "Reprogram PINT Assignment" - default y - help - The interrupt assignment registers controls the pin-to-interrupt - assignment in a byte-wide manner. Each option allows you to select - a set of pins (High/Low Byte) of an specific Port being mapped - to one of the four PIN Interrupts IRQ_PINTx. - - You shouldn't change any of these unless you know exactly what you're doing. - Please consult the Blackfin BF54x Processor Hardware Reference Manual. - -config PINT0_ASSIGN - hex "PINT0_ASSIGN" - depends on PINTx_REASSIGN - default 0x00000101 -config PINT1_ASSIGN - hex "PINT1_ASSIGN" - depends on PINTx_REASSIGN - default 0x01010000 -config PINT2_ASSIGN - hex "PINT2_ASSIGN" - depends on PINTx_REASSIGN - default 0x07000101 -config PINT3_ASSIGN - hex "PINT3_ASSIGN" - depends on PINTx_REASSIGN - default 0x02020303 - -endmenu - endmenu endif diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c index e92543362f3..6d5ffdead06 100644 --- a/arch/blackfin/mach-bf548/boards/cm_bf548.c +++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c @@ -37,7 +37,7 @@ const char bfin_board_name[] = "Bluetechnix CM-BF548"; * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) +#if IS_ENABLED(CONFIG_FB_BF54X_LQ043) #include <mach/bf54x-lq043.h> @@ -69,7 +69,7 @@ static struct platform_device bf54x_lq043_device = { }; #endif -#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_BFIN) static unsigned int bf548_keymap[] = { KEYVAL(0, 0, KEY_ENTER), KEYVAL(0, 1, KEY_HELP), @@ -119,14 +119,14 @@ static struct platform_device bf54x_kpad_device = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -353,7 +353,7 @@ static struct platform_device bfin_uart3_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -456,7 +456,7 @@ static struct platform_device bfin_sir3_device = { #endif #endif -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#if IS_ENABLED(CONFIG_SMSC911X) #include <linux/smsc911x.h> static struct resource smsc911x_resources[] = { @@ -491,7 +491,7 @@ static struct platform_device smsc911x_device = { }; #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) static struct resource musb_resources[] = { [0] = { .start = 0xFFC03C00, @@ -553,7 +553,7 @@ static struct platform_device musb_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -692,7 +692,7 @@ static struct platform_device bfin_sport3_uart_device = { #endif #endif -#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) +#if IS_ENABLED(CONFIG_PATA_BF54X) static struct resource bfin_atapi_resources[] = { { .start = 0xFFC03800, @@ -714,7 +714,7 @@ static struct platform_device bfin_atapi_device = { }; #endif -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) static struct mtd_partition partition_info[] = { { .name = "linux kernel(nand)", @@ -760,7 +760,7 @@ static struct platform_device bf5xx_nand_device = { }; #endif -#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SDH_BFIN) static struct bfin_sd_host bfin_sdh_data = { .dma_chan = CH_SDH, .irq_int0 = IRQ_SDH_MASK0, @@ -776,7 +776,7 @@ static struct platform_device bf54x_sdh_device = { }; #endif -#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) +#if IS_ENABLED(CONFIG_CAN_BFIN) static unsigned short bfin_can_peripherals[] = { P_CAN0_RX, P_CAN0_TX, 0 }; @@ -814,7 +814,7 @@ static struct platform_device bfin_can_device = { }; #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition para_partitions[] = { { .name = "bootloader(nor)", @@ -854,10 +854,9 @@ static struct platform_device para_flash_device = { }; #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* all SPI peripherals info goes here */ -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) /* SPI flash chip (m25p16) */ static struct mtd_partition bfin_spi_flash_partitions[] = { { @@ -884,7 +883,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -901,8 +900,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { #endif static struct spi_board_info bf54x_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -914,7 +912,7 @@ static struct spi_board_info bf54x_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, @@ -924,7 +922,7 @@ static struct spi_board_info bf54x_spi_board_info[] __initdata = { .chip_select = 2, }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -1006,7 +1004,7 @@ static struct platform_device bf54x_spi_master1 = { }; #endif /* spi master and devices */ -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; static struct resource bfin_twi0_resource[] = { @@ -1060,7 +1058,7 @@ static struct platform_device i2c_bfin_twi1_device = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/gpio_keys.h> static struct gpio_keys_button bfin_gpio_keys_table[] = { @@ -1112,11 +1110,11 @@ static struct platform_device *cm_bf548_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -1131,7 +1129,7 @@ static struct platform_device *cm_bf548_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -1146,19 +1144,19 @@ static struct platform_device *cm_bf548_devices[] __initdata = { #endif #endif -#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) +#if IS_ENABLED(CONFIG_FB_BF54X_LQ043) &bf54x_lq043_device, #endif -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#if IS_ENABLED(CONFIG_SMSC911X) &smsc911x_device, #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) &musb_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -1173,43 +1171,43 @@ static struct platform_device *cm_bf548_devices[] __initdata = { #endif #endif -#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) +#if IS_ENABLED(CONFIG_PATA_BF54X) &bfin_atapi_device, #endif -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) &bf5xx_nand_device, #endif -#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SDH_BFIN) &bf54x_sdh_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bf54x_spi_master0, &bf54x_spi_master1, #endif -#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_BFIN) &bf54x_kpad_device, #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi0_device, #if !defined(CONFIG_BF542) &i2c_bfin_twi1_device, #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) ¶_flash_device, #endif -#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) +#if IS_ENABLED(CONFIG_CAN_BFIN) &bfin_can_device, #endif @@ -1220,7 +1218,7 @@ static int __init cm_bf548_init(void) printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf548_devices, ARRAY_SIZE(cm_bf548_devices)); -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) spi_register_board_info(bf54x_spi_board_info, ARRAY_SIZE(bf54x_spi_board_info)); #endif diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index c4d07f04094..1fe7ff28661 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -17,6 +17,9 @@ #include <linux/i2c.h> #include <linux/interrupt.h> #include <linux/usb/musb.h> +#include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/platform_data/pinctrl-adi2.h> #include <asm/bfin5xx_spi.h> #include <asm/dma.h> #include <asm/gpio.h> @@ -38,7 +41,7 @@ const char bfin_board_name[] = "ADI BF548-EZKIT"; * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) #include <linux/usb/isp1760.h> static struct resource bfin_isp1760_resources[] = { [0] = { @@ -73,7 +76,7 @@ static struct platform_device bfin_isp1760_device = { }; #endif -#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) +#if IS_ENABLED(CONFIG_FB_BF54X_LQ043) #include <mach/bf54x-lq043.h> @@ -105,7 +108,7 @@ static struct platform_device bf54x_lq043_device = { }; #endif -#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_BFIN) static const unsigned int bf548_keymap[] = { KEYVAL(0, 0, KEY_ENTER), KEYVAL(0, 1, KEY_HELP), @@ -155,7 +158,7 @@ static struct platform_device bf54x_kpad_device = { }; #endif -#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) +#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY) #include <asm/bfin_rotary.h> static struct bfin_rotary_platform_data bfin_rotary_data = { @@ -187,7 +190,7 @@ static struct platform_device bfin_rotary_device = { }; #endif -#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE) +#if IS_ENABLED(CONFIG_INPUT_ADXL34X) #include <linux/input/adxl34x.h> static const struct adxl34x_platform_data adxl34x_info = { .x_axis_offset = 0, @@ -226,14 +229,14 @@ static const struct adxl34x_platform_data adxl34x_info = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -241,6 +244,13 @@ static struct resource bfin_uart0_resources[] = { .end = UART0_RBR+2, .flags = IORESOURCE_MEM, }, +#ifdef CONFIG_EARLY_PRINTK + { + .start = PORTE_FER, + .end = PORTE_FER+2, + .flags = IORESOURCE_REG, + }, +#endif { .start = IRQ_UART0_TX, .end = IRQ_UART0_TX, @@ -289,6 +299,13 @@ static struct resource bfin_uart1_resources[] = { .end = UART1_RBR+2, .flags = IORESOURCE_MEM, }, +#ifdef CONFIG_EARLY_PRINTK + { + .start = PORTH_FER, + .end = PORTH_FER+2, + .flags = IORESOURCE_REG, + }, +#endif { .start = IRQ_UART1_TX, .end = IRQ_UART1_TX, @@ -353,6 +370,13 @@ static struct resource bfin_uart2_resources[] = { .end = UART2_RBR+2, .flags = IORESOURCE_MEM, }, +#ifdef CONFIG_EARLY_PRINTK + { + .start = PORTB_FER, + .end = PORTB_FER+2, + .flags = IORESOURCE_REG, + }, +#endif { .start = IRQ_UART2_TX, .end = IRQ_UART2_TX, @@ -401,6 +425,13 @@ static struct resource bfin_uart3_resources[] = { .end = UART3_RBR+2, .flags = IORESOURCE_MEM, }, +#ifdef CONFIG_EARLY_PRINTK + { + .start = PORTB_FER, + .end = PORTB_FER+2, + .flags = IORESOURCE_REG, + }, +#endif { .start = IRQ_UART3_TX, .end = IRQ_UART3_TX, @@ -460,7 +491,7 @@ static struct platform_device bfin_uart3_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -563,7 +594,7 @@ static struct platform_device bfin_sir3_device = { #endif #endif -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#if IS_ENABLED(CONFIG_SMSC911X) #include <linux/smsc911x.h> static struct resource smsc911x_resources[] = { @@ -598,7 +629,7 @@ static struct platform_device smsc911x_device = { }; #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) static struct resource musb_resources[] = { [0] = { .start = 0xFFC03C00, @@ -660,7 +691,7 @@ static struct platform_device musb_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -799,7 +830,7 @@ static struct platform_device bfin_sport3_uart_device = { #endif #endif -#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) +#if IS_ENABLED(CONFIG_CAN_BFIN) static unsigned short bfin_can0_peripherals[] = { P_CAN0_RX, P_CAN0_TX, 0 @@ -877,7 +908,7 @@ static struct platform_device bfin_can1_device = { #endif -#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) +#if IS_ENABLED(CONFIG_PATA_BF54X) static struct resource bfin_atapi_resources[] = { { .start = 0xFFC03800, @@ -899,7 +930,7 @@ static struct platform_device bfin_atapi_device = { }; #endif -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) static struct mtd_partition partition_info[] = { { .name = "bootloader(nand)", @@ -949,7 +980,7 @@ static struct platform_device bf5xx_nand_device = { }; #endif -#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SDH_BFIN) static struct bfin_sd_host bfin_sdh_data = { .dma_chan = CH_SDH, @@ -966,7 +997,7 @@ static struct platform_device bf54x_sdh_device = { }; #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition ezkit_partitions[] = { { .name = "bootloader(nor)", @@ -1014,8 +1045,7 @@ static struct platform_device ezkit_flash_device = { }; #endif -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) /* SPI flash chip (m25p16) */ static struct mtd_partition bfin_spi_flash_partitions[] = { { @@ -1042,7 +1072,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -1058,60 +1088,463 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { }; #endif +#ifdef CONFIG_PINCTRL_ADI2 + +# define ADI_PINT_DEVNAME "adi-gpio-pint" +# define ADI_GPIO_DEVNAME "adi-gpio" +# define ADI_PINCTRL_DEVNAME "pinctrl-adi2" + +static struct platform_device bfin_pinctrl_device = { + .name = ADI_PINCTRL_DEVNAME, + .id = 0, +}; + +static struct resource bfin_pint0_resources[] = { + { + .start = PINT0_MASK_SET, + .end = PINT0_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT0, + .end = IRQ_PINT0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint0_device = { + .name = ADI_PINT_DEVNAME, + .id = 0, + .num_resources = ARRAY_SIZE(bfin_pint0_resources), + .resource = bfin_pint0_resources, +}; + +static struct resource bfin_pint1_resources[] = { + { + .start = PINT1_MASK_SET, + .end = PINT1_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT1, + .end = IRQ_PINT1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint1_device = { + .name = ADI_PINT_DEVNAME, + .id = 1, + .num_resources = ARRAY_SIZE(bfin_pint1_resources), + .resource = bfin_pint1_resources, +}; + +static struct resource bfin_pint2_resources[] = { + { + .start = PINT2_MASK_SET, + .end = PINT2_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT2, + .end = IRQ_PINT2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint2_device = { + .name = ADI_PINT_DEVNAME, + .id = 2, + .num_resources = ARRAY_SIZE(bfin_pint2_resources), + .resource = bfin_pint2_resources, +}; + +static struct resource bfin_pint3_resources[] = { + { + .start = PINT3_MASK_SET, + .end = PINT3_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT3, + .end = IRQ_PINT3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint3_device = { + .name = ADI_PINT_DEVNAME, + .id = 3, + .num_resources = ARRAY_SIZE(bfin_pint3_resources), + .resource = bfin_pint3_resources, +}; + +static struct resource bfin_gpa_resources[] = { + { + .start = PORTA_FER, + .end = PORTA_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { /* optional */ + .start = IRQ_PA0, + .end = IRQ_PA0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpa_pdata = { + .port_gpio_base = GPIO_PA0, /* Optional */ + .port_pin_base = GPIO_PA0, + .port_width = GPIO_BANKSIZE, + .pint_id = 0, /* PINT0 */ + .pint_assign = true, /* PINT upper 16 bit */ + .pint_map = 0, /* mapping mask in PINT */ +}; + +static struct platform_device bfin_gpa_device = { + .name = ADI_GPIO_DEVNAME, + .id = 0, + .num_resources = ARRAY_SIZE(bfin_gpa_resources), + .resource = bfin_gpa_resources, + .dev = { + .platform_data = &bfin_gpa_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpb_resources[] = { + { + .start = PORTB_FER, + .end = PORTB_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PB0, + .end = IRQ_PB0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpb_pdata = { + .port_gpio_base = GPIO_PB0, + .port_pin_base = GPIO_PB0, + .port_width = 15, + .pint_id = 0, + .pint_assign = true, + .pint_map = 1, +}; + +static struct platform_device bfin_gpb_device = { + .name = ADI_GPIO_DEVNAME, + .id = 1, + .num_resources = ARRAY_SIZE(bfin_gpb_resources), + .resource = bfin_gpb_resources, + .dev = { + .platform_data = &bfin_gpb_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpc_resources[] = { + { + .start = PORTC_FER, + .end = PORTC_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PC0, + .end = IRQ_PC0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpc_pdata = { + .port_gpio_base = GPIO_PC0, + .port_pin_base = GPIO_PC0, + .port_width = 14, + .pint_id = 2, + .pint_assign = true, + .pint_map = 0, +}; + +static struct platform_device bfin_gpc_device = { + .name = ADI_GPIO_DEVNAME, + .id = 2, + .num_resources = ARRAY_SIZE(bfin_gpc_resources), + .resource = bfin_gpc_resources, + .dev = { + .platform_data = &bfin_gpc_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpd_resources[] = { + { + .start = PORTD_FER, + .end = PORTD_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PD0, + .end = IRQ_PD0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpd_pdata = { + .port_gpio_base = GPIO_PD0, + .port_pin_base = GPIO_PD0, + .port_width = GPIO_BANKSIZE, + .pint_id = 2, + .pint_assign = false, + .pint_map = 1, +}; + +static struct platform_device bfin_gpd_device = { + .name = ADI_GPIO_DEVNAME, + .id = 3, + .num_resources = ARRAY_SIZE(bfin_gpd_resources), + .resource = bfin_gpd_resources, + .dev = { + .platform_data = &bfin_gpd_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpe_resources[] = { + { + .start = PORTE_FER, + .end = PORTE_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PE0, + .end = IRQ_PE0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpe_pdata = { + .port_gpio_base = GPIO_PE0, + .port_pin_base = GPIO_PE0, + .port_width = GPIO_BANKSIZE, + .pint_id = 3, + .pint_assign = true, + .pint_map = 2, +}; + +static struct platform_device bfin_gpe_device = { + .name = ADI_GPIO_DEVNAME, + .id = 4, + .num_resources = ARRAY_SIZE(bfin_gpe_resources), + .resource = bfin_gpe_resources, + .dev = { + .platform_data = &bfin_gpe_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpf_resources[] = { + { + .start = PORTF_FER, + .end = PORTF_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PF0, + .end = IRQ_PF0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpf_pdata = { + .port_gpio_base = GPIO_PF0, + .port_pin_base = GPIO_PF0, + .port_width = GPIO_BANKSIZE, + .pint_id = 3, + .pint_assign = false, + .pint_map = 3, +}; + +static struct platform_device bfin_gpf_device = { + .name = ADI_GPIO_DEVNAME, + .id = 5, + .num_resources = ARRAY_SIZE(bfin_gpf_resources), + .resource = bfin_gpf_resources, + .dev = { + .platform_data = &bfin_gpf_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpg_resources[] = { + { + .start = PORTG_FER, + .end = PORTG_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PG0, + .end = IRQ_PG0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpg_pdata = { + .port_gpio_base = GPIO_PG0, + .port_pin_base = GPIO_PG0, + .port_width = GPIO_BANKSIZE, + .pint_id = -1, +}; + +static struct platform_device bfin_gpg_device = { + .name = ADI_GPIO_DEVNAME, + .id = 6, + .num_resources = ARRAY_SIZE(bfin_gpg_resources), + .resource = bfin_gpg_resources, + .dev = { + .platform_data = &bfin_gpg_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gph_resources[] = { + { + .start = PORTH_FER, + .end = PORTH_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PH0, + .end = IRQ_PH0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gph_pdata = { + .port_gpio_base = GPIO_PH0, + .port_pin_base = GPIO_PH0, + .port_width = 14, + .pint_id = -1, +}; + +static struct platform_device bfin_gph_device = { + .name = ADI_GPIO_DEVNAME, + .id = 7, + .num_resources = ARRAY_SIZE(bfin_gph_resources), + .resource = bfin_gph_resources, + .dev = { + .platform_data = &bfin_gph_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpi_resources[] = { + { + .start = PORTI_FER, + .end = PORTI_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PI0, + .end = IRQ_PI0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpi_pdata = { + .port_gpio_base = GPIO_PI0, + .port_pin_base = GPIO_PI0, + .port_width = GPIO_BANKSIZE, + .pint_id = -1, +}; + +static struct platform_device bfin_gpi_device = { + .name = ADI_GPIO_DEVNAME, + .id = 8, + .num_resources = ARRAY_SIZE(bfin_gpi_resources), + .resource = bfin_gpi_resources, + .dev = { + .platform_data = &bfin_gpi_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpj_resources[] = { + { + .start = PORTJ_FER, + .end = PORTJ_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PJ0, + .end = IRQ_PJ0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpj_pdata = { + .port_gpio_base = GPIO_PJ0, + .port_pin_base = GPIO_PJ0, + .port_width = 14, + .pint_id = -1, +}; + +static struct platform_device bfin_gpj_device = { + .name = ADI_GPIO_DEVNAME, + .id = 9, + .num_resources = ARRAY_SIZE(bfin_gpj_resources), + .resource = bfin_gpj_resources, + .dev = { + .platform_data = &bfin_gpj_pdata, /* Passed to driver */ + }, +}; + +#endif + static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, /* Framework bus number */ - .chip_select = 1, /* SPI_SSEL1*/ + .chip_select = MAX_CTRL_CS + GPIO_PE4, /* SPI_SSEL1*/ .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ - || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 1, - .chip_select = 4, + .chip_select = MAX_CTRL_CS + GPIO_PG6, /* SPI_SSEL2 */ }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, .irq = IRQ_PB4, /* old boards (<=Rev 1.3) use IRQ_PJ11 */ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 2, + .chip_select = MAX_CTRL_CS + GPIO_PE5, /* SPI_SSEL2 */ }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 1, + .chip_select = MAX_CTRL_CS + GPIO_PE4, /* SPI_SSEL1 */ }, #endif -#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE) +#if IS_ENABLED(CONFIG_INPUT_ADXL34X_SPI) { .modalias = "adxl34x", .platform_data = &adxl34x_info, .irq = IRQ_PC5, .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 1, - .chip_select = 2, + .chip_select = MAX_CTRL_CS + GPIO_PG6, /* SPI_SSEL2 */ .mode = SPI_MODE_3, }, #endif }; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { [0] = { @@ -1152,7 +1585,7 @@ static struct resource bfin_spi1_resource[] = { /* SPI controller data */ static struct bfin5xx_spi_master bf54x_spi_master_info0 = { - .num_chipselect = 4, + .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, .enable_dma = 1, /* master has the ability to do dma transfer */ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, }; @@ -1168,7 +1601,7 @@ static struct platform_device bf54x_spi_master0 = { }; static struct bfin5xx_spi_master bf54x_spi_master_info1 = { - .num_chipselect = 4, + .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, .enable_dma = 1, /* master has the ability to do dma transfer */ .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0}, }; @@ -1184,8 +1617,7 @@ static struct platform_device bf54x_spi_master1 = { }; #endif /* spi master and devices */ -#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \ - || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE) #include <linux/videodev2.h> #include <media/blackfin/bfin_capture.h> #include <media/blackfin/ppi.h> @@ -1205,8 +1637,7 @@ static const struct ppi_info ppi_info = { .pin_req = ppi_req, }; -#if defined(CONFIG_VIDEO_VS6624) \ - || defined(CONFIG_VIDEO_VS6624_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_VS6624) static struct v4l2_input vs6624_inputs[] = { { .index = 0, @@ -1251,7 +1682,7 @@ static struct platform_device bfin_capture_device = { }; #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; static struct resource bfin_twi0_resource[] = { @@ -1306,7 +1737,7 @@ static struct platform_device i2c_bfin_twi1_device = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info0[] = { -#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_SSM2602) { I2C_BOARD_INFO("ssm2602", 0x1b), }, @@ -1315,25 +1746,25 @@ static struct i2c_board_info __initdata bfin_i2c_board_info0[] = { #if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */ static struct i2c_board_info __initdata bfin_i2c_board_info1[] = { -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, #endif -#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE) +#if IS_ENABLED(CONFIG_INPUT_PCF8574) { I2C_BOARD_INFO("pcf8574_keypad", 0x27), .irq = 212, }, #endif -#if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE) +#if IS_ENABLED(CONFIG_INPUT_ADXL34X_I2C) { I2C_BOARD_INFO("adxl34x", 0x53), .irq = IRQ_PC5, .platform_data = (void *)&adxl34x_info, }, #endif -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("ad5252", 0x2f), }, @@ -1341,7 +1772,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info1[] = { }; #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/gpio_keys.h> static struct gpio_keys_button bfin_gpio_keys_table[] = { @@ -1392,9 +1823,8 @@ static struct platform_device bfin_dpmc = { }, }; -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \ - defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) || \ - defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) || \ + IS_ENABLED(CONFIG_SND_BF5XX_AC97) #define SPORT_REQ(x) \ [x] = {P_SPORT##x##_TFS, P_SPORT##x##_DTPRI, P_SPORT##x##_TSCLK, \ @@ -1454,42 +1884,35 @@ static struct resource bfin_snd_resources[][4] = { }; #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) static struct platform_device bfin_i2s_pcm = { .name = "bfin-i2s-pcm-audio", .id = -1, }; #endif -#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) -static struct platform_device bfin_tdm_pcm = { - .name = "bfin-tdm-pcm-audio", - .id = -1, -}; -#endif - -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) static struct platform_device bfin_ac97_pcm = { .name = "bfin-ac97-pcm-audio", .id = -1, }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311) static struct platform_device bfin_ad73311_codec_device = { .name = "ad73311", .id = -1, }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD1980) || defined(CONFIG_SND_BF5XX_SOC_AD1980_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1980) static struct platform_device bfin_ad1980_codec_device = { .name = "ad1980", .id = -1, }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_I2S) || defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S) static struct platform_device bfin_i2s = { .name = "bfin-i2s", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -1501,19 +1924,7 @@ static struct platform_device bfin_i2s = { }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_TDM) || defined(CONFIG_SND_BF5XX_SOC_TDM_MODULE) -static struct platform_device bfin_tdm = { - .name = "bfin-tdm", - .id = CONFIG_SND_BF5XX_SPORT_NUM, - .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]), - .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM], - .dev = { - .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM], - }, -}; -#endif - -#if defined(CONFIG_SND_BF5XX_SOC_AC97) || defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97) static struct platform_device bfin_ac97 = { .name = "bfin-ac97", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -1528,12 +1939,29 @@ static struct platform_device bfin_ac97 = { static struct platform_device *ezkit_devices[] __initdata = { &bfin_dpmc, - -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if defined(CONFIG_PINCTRL_ADI2) + &bfin_pinctrl_device, + &bfin_pint0_device, + &bfin_pint1_device, + &bfin_pint2_device, + &bfin_pint3_device, + &bfin_gpa_device, + &bfin_gpb_device, + &bfin_gpc_device, + &bfin_gpd_device, + &bfin_gpe_device, + &bfin_gpf_device, + &bfin_gpg_device, + &bfin_gph_device, + &bfin_gpi_device, + &bfin_gpj_device, +#endif + +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -1548,7 +1976,7 @@ static struct platform_device *ezkit_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -1563,23 +1991,23 @@ static struct platform_device *ezkit_devices[] __initdata = { #endif #endif -#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) +#if IS_ENABLED(CONFIG_FB_BF54X_LQ043) &bf54x_lq043_device, #endif -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#if IS_ENABLED(CONFIG_SMSC911X) &smsc911x_device, #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) &musb_device, #endif -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) &bfin_isp1760_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -1594,86 +2022,137 @@ static struct platform_device *ezkit_devices[] __initdata = { #endif #endif -#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) +#if IS_ENABLED(CONFIG_CAN_BFIN) &bfin_can0_device, &bfin_can1_device, #endif -#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) +#if IS_ENABLED(CONFIG_PATA_BF54X) &bfin_atapi_device, #endif -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) &bf5xx_nand_device, #endif -#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SDH_BFIN) &bf54x_sdh_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bf54x_spi_master0, &bf54x_spi_master1, #endif -#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \ - || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE) &bfin_capture_device, #endif -#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_BFIN) &bf54x_kpad_device, #endif -#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) +#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY) &bfin_rotary_device, #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi0_device, #if !defined(CONFIG_BF542) &i2c_bfin_twi1_device, #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &ezkit_flash_device, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) &bfin_i2s_pcm, #endif -#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) - &bfin_tdm_pcm, -#endif -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) + +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) &bfin_ac97_pcm, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD1980) || defined(CONFIG_SND_BF5XX_SOC_AD1980_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1980) &bfin_ad1980_codec_device, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) &bfin_i2s, #endif -#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) - &bfin_tdm, +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) + &bfin_ac97, #endif +}; -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) - &bfin_ac97, +/* Pin control settings */ +static struct pinctrl_map __initdata bfin_pinmux_map[] = { + /* per-device maps */ + PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.0", "pinctrl-adi2.0", NULL, "uart0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.1", "pinctrl-adi2.0", NULL, "uart1"), +#ifdef CONFIG_BFIN_UART1_CTSRTS + PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.1", "pinctrl-adi2.0", NULL, "uart1_ctsrts"), #endif + PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.2", "pinctrl-adi2.0", NULL, "uart2"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.3", "pinctrl-adi2.0", NULL, "uart3"), +#ifdef CONFIG_BFIN_UART3_CTSRTS + PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.3", "pinctrl-adi2.0", NULL, "uart3_ctsrts"), +#endif + PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.0", "pinctrl-adi2.0", NULL, "uart0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.1", "pinctrl-adi2.0", NULL, "uart1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.2", "pinctrl-adi2.0", NULL, "uart2"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.3", "pinctrl-adi2.0", NULL, "uart3"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-sdh.0", "pinctrl-adi2.0", NULL, "rsi0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-spi.0", "pinctrl-adi2.0", NULL, "spi0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-spi.1", "pinctrl-adi2.0", NULL, "spi1"), + PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.0", "pinctrl-adi2.0", NULL, "twi0"), +#if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */ + PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.1", "pinctrl-adi2.0", NULL, "twi1"), +#endif + PIN_MAP_MUX_GROUP_DEFAULT("bfin-rotary", "pinctrl-adi2.0", NULL, "rotary"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_can.0", "pinctrl-adi2.0", NULL, "can0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_can.1", "pinctrl-adi2.0", NULL, "can1"), + PIN_MAP_MUX_GROUP_DEFAULT("bf54x-lq043", "pinctrl-adi2.0", "ppi0_24bgrp", "ppi0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.0", "pinctrl-adi2.0", NULL, "sport0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.0", "pinctrl-adi2.0", NULL, "sport0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-ac97.0", "pinctrl-adi2.0", NULL, "sport0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.1", "pinctrl-adi2.0", NULL, "sport1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.1", "pinctrl-adi2.0", NULL, "sport1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-ac97.1", "pinctrl-adi2.0", NULL, "sport1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.2", "pinctrl-adi2.0", NULL, "sport2"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.2", "pinctrl-adi2.0", NULL, "sport2"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-ac97.2", "pinctrl-adi2.0", NULL, "sport2"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.3", "pinctrl-adi2.0", NULL, "sport3"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.3", "pinctrl-adi2.0", NULL, "sport3"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-ac97.3", "pinctrl-adi2.0", NULL, "sport3"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-sport-uart.0", "pinctrl-adi2.0", NULL, "sport0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-sport-uart.1", "pinctrl-adi2.0", NULL, "sport1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-sport-uart.2", "pinctrl-adi2.0", NULL, "sport2"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-sport-uart.3", "pinctrl-adi2.0", NULL, "sport3"), + PIN_MAP_MUX_GROUP_DEFAULT("pata-bf54x", "pinctrl-adi2.0", NULL, "atapi"), +#ifdef CONFIG_BF548_ATAPI_ALTERNATIVE_PORT + PIN_MAP_MUX_GROUP_DEFAULT("pata-bf54x", "pinctrl-adi2.0", NULL, "atapi_alter"), +#endif + PIN_MAP_MUX_GROUP_DEFAULT("bf5xx-nand.0", "pinctrl-adi2.0", NULL, "nfc0"), + PIN_MAP_MUX_GROUP_DEFAULT("bf54x-keys", "pinctrl-adi2.0", "keys_4x4grp", "keys"), + PIN_MAP_MUX_GROUP("bf54x-keys", "4bit", "pinctrl-adi2.0", "keys_4x4grp", "keys"), + PIN_MAP_MUX_GROUP("bf54x-keys", "8bit", "pinctrl-adi2.0", "keys_8x8grp", "keys"), }; static int __init ezkit_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); + /* Initialize pinmuxing */ + pinctrl_register_mappings(bfin_pinmux_map, + ARRAY_SIZE(bfin_pinmux_map)); + i2c_register_board_info(0, bfin_i2c_board_info0, ARRAY_SIZE(bfin_i2c_board_info0)); #if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */ @@ -1705,21 +2184,6 @@ static struct platform_device *ezkit_early_devices[] __initdata = { &bfin_uart3_device, #endif #endif - -#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) -#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART - &bfin_sport0_uart_device, -#endif -#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART - &bfin_sport1_uart_device, -#endif -#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART - &bfin_sport2_uart_device, -#endif -#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART - &bfin_sport3_uart_device, -#endif -#endif }; void __init native_machine_early_platform_add_devices(void) diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h index 5b711d85b90..098fad63e03 100644 --- a/arch/blackfin/mach-bf548/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h @@ -296,5 +296,6 @@ #define ANOMALY_05000440 (0) #define ANOMALY_05000475 (0) #define ANOMALY_05000480 (0) +#define ANOMALY_16000030 (0) #endif diff --git a/arch/blackfin/mach-bf548/include/mach/defBF544.h b/arch/blackfin/mach-bf548/include/mach/defBF544.h index 329b2c58228..018ebfc27f5 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF544.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF544.h @@ -601,36 +601,6 @@ #define GU_TRANS 0xff00 /* Transparent Color - G/U Component */ #define BV_TRANS 0xff0000 /* Transparent Color - B/V Component */ -/* Bit masks for HOST_CONTROL */ - -#define HOST_EN 0x1 /* Host Enable */ -#define HOST_END 0x2 /* Host Endianess */ -#define DATA_SIZE 0x4 /* Data Size */ -#define HOST_RST 0x8 /* Host Reset */ -#define HRDY_OVR 0x20 /* Host Ready Override */ -#define INT_MODE 0x40 /* Interrupt Mode */ -#define BT_EN 0x80 /* Bus Timeout Enable */ -#define EHW 0x100 /* Enable Host Write */ -#define EHR 0x200 /* Enable Host Read */ -#define BDR 0x400 /* Burst DMA Requests */ - -/* Bit masks for HOST_STATUS */ - -#define DMA_READY 0x1 /* DMA Ready */ -#define FIFOFULL 0x2 /* FIFO Full */ -#define FIFOEMPTY 0x4 /* FIFO Empty */ -#define DMA_COMPLETE 0x8 /* DMA Complete */ -#define HSHK 0x10 /* Host Handshake */ -#define HSTIMEOUT 0x20 /* Host Timeout */ -#define HIRQ 0x40 /* Host Interrupt Request */ -#define ALLOW_CNFG 0x80 /* Allow New Configuration */ -#define DMA_DIR 0x100 /* DMA Direction */ -#define BTE 0x200 /* Bus Timeout Enabled */ - -/* Bit masks for HOST_TIMEOUT */ - -#define COUNT_TIMEOUT 0x7ff /* Host Timeout count */ - /* Bit masks for TIMER_ENABLE1 */ #define TIMEN8 0x1 /* Timer 8 Enable */ diff --git a/arch/blackfin/mach-bf548/include/mach/defBF547.h b/arch/blackfin/mach-bf548/include/mach/defBF547.h index e18de212ba1..d55dcc0f532 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF547.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF547.h @@ -581,36 +581,6 @@ #define GU_TRANS 0xff00 /* Transparent Color - G/U Component */ #define BV_TRANS 0xff0000 /* Transparent Color - B/V Component */ -/* Bit masks for HOST_CONTROL */ - -#define HOST_EN 0x1 /* Host Enable */ -#define HOST_END 0x2 /* Host Endianess */ -#define DATA_SIZE 0x4 /* Data Size */ -#define HOST_RST 0x8 /* Host Reset */ -#define HRDY_OVR 0x20 /* Host Ready Override */ -#define INT_MODE 0x40 /* Interrupt Mode */ -#define BT_EN 0x80 /* Bus Timeout Enable */ -#define EHW 0x100 /* Enable Host Write */ -#define EHR 0x200 /* Enable Host Read */ -#define BDR 0x400 /* Burst DMA Requests */ - -/* Bit masks for HOST_STATUS */ - -#define DMA_READY 0x1 /* DMA Ready */ -#define FIFOFULL 0x2 /* FIFO Full */ -#define FIFOEMPTY 0x4 /* FIFO Empty */ -#define DMA_COMPLETE 0x8 /* DMA Complete */ -#define HSHK 0x10 /* Host Handshake */ -#define HSTIMEOUT 0x20 /* Host Timeout */ -#define HIRQ 0x40 /* Host Interrupt Request */ -#define ALLOW_CNFG 0x80 /* Allow New Configuration */ -#define DMA_DIR 0x100 /* DMA Direction */ -#define BTE 0x200 /* Bus Timeout Enabled */ - -/* Bit masks for HOST_TIMEOUT */ - -#define COUNT_TIMEOUT 0x7ff /* Host Timeout count */ - /* Bit masks for KPAD_CTL */ #define KPAD_EN 0x1 /* Keypad Enable */ diff --git a/arch/blackfin/mach-bf548/include/mach/gpio.h b/arch/blackfin/mach-bf548/include/mach/gpio.h index be9edb28f96..006da1edcf8 100644 --- a/arch/blackfin/mach-bf548/include/mach/gpio.h +++ b/arch/blackfin/mach-bf548/include/mach/gpio.h @@ -194,14 +194,6 @@ struct gpio_port_t { unsigned int port_mux; }; -struct gpio_port_s { - unsigned short fer; - unsigned short data; - unsigned short dir; - unsigned short inen; - unsigned int mux; -}; - #endif #include <mach-common/ports-a.h> diff --git a/arch/blackfin/mach-bf548/include/mach/irq.h b/arch/blackfin/mach-bf548/include/mach/irq.h index 10dc142c518..cf7cb725cfa 100644 --- a/arch/blackfin/mach-bf548/include/mach/irq.h +++ b/arch/blackfin/mach-bf548/include/mach/irq.h @@ -433,7 +433,7 @@ #include <linux/types.h> /* - * bfin pint registers layout + * gpio pint registers layout */ struct bfin_pint_regs { u32 mask_set; diff --git a/arch/blackfin/mach-bf548/include/mach/portmux.h b/arch/blackfin/mach-bf548/include/mach/portmux.h index e2224620273..d9f8632d7d0 100644 --- a/arch/blackfin/mach-bf548/include/mach/portmux.h +++ b/arch/blackfin/mach-bf548/include/mach/portmux.h @@ -7,8 +7,6 @@ #ifndef _MACH_PORTMUX_H_ #define _MACH_PORTMUX_H_ -#define MAX_RESOURCES MAX_BLACKFIN_GPIOS - #define P_SPORT2_TFS (P_DEFINED | P_IDENT(GPIO_PA0) | P_FUNCT(0)) #define P_SPORT2_DTSEC (P_DEFINED | P_IDENT(GPIO_PA1) | P_FUNCT(0)) #define P_SPORT2_DTPRI (P_DEFINED | P_IDENT(GPIO_PA2) | P_FUNCT(0)) diff --git a/arch/blackfin/mach-bf561/boards/acvilon.c b/arch/blackfin/mach-bf561/boards/acvilon.c index 0b74218fdd3..6ab951534d7 100644 --- a/arch/blackfin/mach-bf561/boards/acvilon.c +++ b/arch/blackfin/mach-bf561/boards/acvilon.c @@ -44,6 +44,7 @@ #include <linux/spi/flash.h> #include <linux/irq.h> #include <linux/interrupt.h> +#include <linux/gpio.h> #include <linux/jiffies.h> #include <linux/i2c-pca-platform.h> #include <linux/delay.h> @@ -60,7 +61,7 @@ */ const char bfin_board_name[] = "Acvilon board"; -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) #include <linux/usb/isp1760.h> static struct resource bfin_isp1760_resources[] = { [0] = { @@ -137,7 +138,7 @@ static struct i2c_board_info acvilon_i2c_devs[] __initdata = { }, }; -#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE) +#if IS_ENABLED(CONFIG_MTD_PLATRAM) static struct platdata_mtd_ram mtd_ram_data = { .mapname = "rootfs(RAM)", .bankwidth = 4, @@ -160,7 +161,7 @@ static struct platform_device mtd_ram_device = { }; #endif -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#if IS_ENABLED(CONFIG_SMSC911X) #include <linux/smsc911x.h> static struct resource smsc911x_resources[] = { { @@ -194,7 +195,7 @@ static struct platform_device smsc911x_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -246,7 +247,7 @@ static struct platform_device bfin_uart0_device = { #endif #endif -#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM) static struct mtd_partition bfin_plat_nand_partitions[] = { { @@ -323,7 +324,7 @@ static void bfin_plat_nand_init(void) } #endif -#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE) +#if IS_ENABLED(CONFIG_MTD_DATAFLASH) static struct mtd_partition bfin_spi_dataflash_partitions[] = { { .name = "bootloader", @@ -369,7 +370,7 @@ static struct bfin5xx_spi_chip data_flash_chip_info = { }; #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { [0] = { @@ -408,7 +409,7 @@ static struct platform_device bfin_spi0_device = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -416,7 +417,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 3, }, #endif -#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE) +#if IS_ENABLED(CONFIG_MTD_DATAFLASH) { /* DataFlash chip */ .modalias = "mtd_dataflash", .max_speed_hz = 33250000, /* max spi clock (SCK) speed in HZ */ @@ -472,11 +473,11 @@ static struct platform_device bfin_dpmc = { static struct platform_device *acvilon_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -484,17 +485,17 @@ static struct platform_device *acvilon_devices[] __initdata = { &bfin_gpios_device, -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#if IS_ENABLED(CONFIG_SMSC911X) &smsc911x_device, #endif &bfin_i2c_pca_device, -#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM) &bfin_async_nand_device, #endif -#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE) +#if IS_ENABLED(CONFIG_MTD_PLATRAM) &mtd_ram_device, #endif diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index d81450f635d..e862f7823e6 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -13,11 +13,12 @@ #include <linux/mtd/partitions.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) #include <linux/usb/isp1362.h> #endif #include <linux/ata_platform.h> #include <linux/irq.h> +#include <linux/gpio.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <asm/portmux.h> @@ -29,10 +30,10 @@ */ const char bfin_board_name[] = "Bluetechnix CM BF561"; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* all SPI peripherals info goes here */ -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -64,7 +65,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -77,7 +78,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -85,7 +86,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 4, }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -134,14 +135,14 @@ static struct platform_device bfin_spi0_device = { #endif /* spi master and devices */ -#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) +#if IS_ENABLED(CONFIG_FB_HITACHI_TX09) static struct platform_device hitachi_fb_device = { .name = "hitachi-tx09", }; #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -173,7 +174,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#if IS_ENABLED(CONFIG_SMSC911X) #include <linux/smsc911x.h> static struct resource smsc911x_resources[] = { @@ -208,7 +209,7 @@ static struct platform_device smsc911x_device = { }; #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x24000000, @@ -229,7 +230,7 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) static struct resource isp1362_hcd_resources[] = { { .start = 0x24008000, @@ -268,7 +269,7 @@ static struct platform_device isp1362_hcd_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -319,7 +320,7 @@ static struct platform_device bfin_uart0_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -348,7 +349,7 @@ static struct platform_device bfin_sir0_device = { #endif #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) #define PATA_INT IRQ_PF46 static struct pata_platform_info bfin_pata_platform_data = { @@ -385,7 +386,7 @@ static struct platform_device bfin_pata_device = { }; #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition para_partitions[] = { { .name = "bootloader(nor)", @@ -456,54 +457,54 @@ static struct platform_device *cm_bf561_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) +#if IS_ENABLED(CONFIG_FB_HITACHI_TX09) &hitachi_fb_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) &isp1362_hcd_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#if IS_ENABLED(CONFIG_SMSC911X) &smsc911x_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) &bfin_pata_device, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) ¶_flash_device, #endif }; static int __init net2272_init(void) { -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) int ret; ret = gpio_request(GPIO_PF46, "net2272"); @@ -523,11 +524,11 @@ static int __init cm_bf561_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf561_devices, ARRAY_SIZE(cm_bf561_devices)); -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN); #endif diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index 551f866172c..2de71e8c104 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -14,6 +14,7 @@ #include <linux/spi/spi.h> #include <linux/irq.h> #include <linux/interrupt.h> +#include <linux/gpio.h> #include <linux/delay.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> @@ -25,7 +26,7 @@ */ const char bfin_board_name[] = "ADI BF561-EZKIT"; -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) #include <linux/usb/isp1760.h> static struct resource bfin_isp1760_resources[] = { [0] = { @@ -60,7 +61,7 @@ static struct platform_device bfin_isp1760_device = { }; #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) #include <linux/usb/isp1362.h> static struct resource isp1362_hcd_resources[] = { @@ -101,7 +102,7 @@ static struct platform_device isp1362_hcd_device = { }; #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x2C000000, @@ -129,7 +130,7 @@ static struct platform_device net2272_bfin_device = { * USB-LAN EzExtender board * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -163,7 +164,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -214,7 +215,7 @@ static struct platform_device bfin_uart0_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -243,7 +244,7 @@ static struct platform_device bfin_sir0_device = { #endif #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition ezkit_partitions[] = { { .name = "bootloader(nor)", @@ -291,7 +292,7 @@ static struct platform_device ezkit_flash_device = { }; #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { [0] = { @@ -330,8 +331,7 @@ static struct platform_device bfin_spi0_device = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ - || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -341,7 +341,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -351,7 +351,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -375,7 +375,7 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) +#if IS_ENABLED(CONFIG_I2C_GPIO) #include <linux/i2c-gpio.h> static struct i2c_gpio_platform_data i2c_gpio_data = { @@ -422,8 +422,7 @@ static struct platform_device bfin_dpmc = { }, }; -#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \ - || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE) #include <linux/videodev2.h> #include <media/blackfin/bfin_capture.h> #include <media/blackfin/ppi.h> @@ -443,8 +442,7 @@ static const struct ppi_info ppi_info = { .pin_req = ppi_req, }; -#if defined(CONFIG_VIDEO_ADV7183) \ - || defined(CONFIG_VIDEO_ADV7183_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_ADV7183) #include <media/adv7183.h> static struct v4l2_input adv7183_inputs[] = { { @@ -515,7 +513,7 @@ static struct platform_device bfin_capture_device = { }; #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) static struct platform_device bfin_i2s = { .name = "bfin-i2s", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -523,15 +521,7 @@ static struct platform_device bfin_i2s = { }; #endif -#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) -static struct platform_device bfin_tdm = { - .name = "bfin-tdm", - .id = CONFIG_SND_BF5XX_SPORT_NUM, - /* TODO: add platform data here */ -}; -#endif - -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) static struct platform_device bfin_ac97 = { .name = "bfin-ac97", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -539,10 +529,9 @@ static struct platform_device bfin_ac97 = { }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \ - || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) static const char * const ad1836_link[] = { - "bfin-tdm.0", + "bfin-i2s.0", "spi0.4", }; static struct platform_device bfin_ad1836_machine = { @@ -558,76 +547,70 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) &bfin_isp1760_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) +#if IS_ENABLED(CONFIG_I2C_GPIO) &i2c_gpio_device, #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) &isp1362_hcd_device, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &ezkit_flash_device, #endif -#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \ - || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE) &bfin_capture_device, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) &bfin_i2s, #endif -#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) - &bfin_tdm, -#endif - -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) &bfin_ac97, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \ - defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) &bfin_ad1836_machine, #endif }; static int __init net2272_init(void) { -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) int ret; ret = gpio_request(GPIO_PF11, "net2272"); @@ -653,12 +636,12 @@ static int __init ezkit_init(void) if (ret < 0) return ret; -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() | (1 << 12)); SSYNC(); #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() | (1 << 15)); bfin_write_FIO0_FLAG_S(1 << 15); SSYNC(); diff --git a/arch/blackfin/mach-bf561/boards/tepla.c b/arch/blackfin/mach-bf561/boards/tepla.c index 1a57bc986aa..f87b8cc0cd4 100644 --- a/arch/blackfin/mach-bf561/boards/tepla.c +++ b/arch/blackfin/mach-bf561/boards/tepla.c @@ -42,7 +42,7 @@ static struct platform_device smc91x_device = { .resource = smc91x_resources, }; -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -93,7 +93,7 @@ static struct platform_device bfin_uart0_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -125,13 +125,13 @@ static struct platform_device bfin_sir0_device = { static struct platform_device *tepla_devices[] __initdata = { &smc91x_device, -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h index 72476ff5033..038249c1d0d 100644 --- a/arch/blackfin/mach-bf561/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h @@ -348,5 +348,6 @@ #define ANOMALY_05000474 (0) #define ANOMALY_05000480 (0) #define ANOMALY_05000485 (0) +#define ANOMALY_16000030 (0) #endif diff --git a/arch/blackfin/mach-bf561/smp.c b/arch/blackfin/mach-bf561/smp.c index ab1c617b9cf..11789beca75 100644 --- a/arch/blackfin/mach-bf561/smp.c +++ b/arch/blackfin/mach-bf561/smp.c @@ -48,7 +48,7 @@ int __init setup_profiling_timer(unsigned int multiplier) /* not supported */ return -EINVAL; } -void __cpuinit platform_secondary_init(unsigned int cpu) +void platform_secondary_init(unsigned int cpu) { /* Clone setup for peripheral interrupt sources from CoreA. */ bfin_write_SICB_IMASK0(bfin_read_SIC_IMASK0()); @@ -69,12 +69,11 @@ void __cpuinit platform_secondary_init(unsigned int cpu) SSYNC(); /* We are done with local CPU inits, unblock the boot CPU. */ - set_cpu_online(cpu, true); spin_lock(&boot_lock); spin_unlock(&boot_lock); } -int __cpuinit platform_boot_secondary(unsigned int cpu, struct task_struct *idle) +int platform_boot_secondary(unsigned int cpu, struct task_struct *idle) { unsigned long timeout; @@ -91,7 +90,9 @@ int __cpuinit platform_boot_secondary(unsigned int cpu, struct task_struct *idle SSYNC(); } - timeout = jiffies + 1 * HZ; + timeout = jiffies + HZ; + /* release the lock and let coreb run */ + spin_unlock(&boot_lock); while (time_before(jiffies, timeout)) { if (cpu_online(cpu)) break; @@ -100,8 +101,6 @@ int __cpuinit platform_boot_secondary(unsigned int cpu, struct task_struct *idle } if (cpu_online(cpu)) { - /* release the lock and let coreb run */ - spin_unlock(&boot_lock); return 0; } else panic("CPU%u: processor failed to boot\n", cpu); @@ -155,7 +154,7 @@ void platform_clear_ipi(unsigned int cpu, int irq) * Setup core B's local core timer. * In SMP, core timer is used for clock event device. */ -void __cpuinit bfin_local_timer_setup(void) +void bfin_local_timer_setup(void) { #if defined(CONFIG_TICKSOURCE_CORETMR) struct irq_data *data = irq_get_irq_data(IRQ_CORETMR); diff --git a/arch/blackfin/mach-bf609/Kconfig b/arch/blackfin/mach-bf609/Kconfig index 101b33ee9bb..6584190faeb 100644 --- a/arch/blackfin/mach-bf609/Kconfig +++ b/arch/blackfin/mach-bf609/Kconfig @@ -9,56 +9,1675 @@ source "arch/blackfin/mach-bf609/boards/Kconfig" menu "BF609 Specific Configuration" -comment "Pin Interrupt to Port Assignment" -menu "Assignment" - -config PINTx_REASSIGN - bool "Reprogram PINT Assignment" - default y - help - The interrupt assignment registers controls the pin-to-interrupt - assignment in a byte-wide manner. Each option allows you to select - a set of pins (High/Low Byte) of an specific Port being mapped - to one of the four PIN Interrupts IRQ_PINTx. - - You shouldn't change any of these unless you know exactly what you're doing. - Please consult the Blackfin BF60x Processor Hardware Reference Manual. - -config PINT0_ASSIGN - hex "PINT0_ASSIGN" - depends on PINTx_REASSIGN - default 0x00000101 -config PINT1_ASSIGN - hex "PINT1_ASSIGN" - depends on PINTx_REASSIGN - default 0x00000101 -config PINT2_ASSIGN - hex "PINT2_ASSIGN" - depends on PINTx_REASSIGN - default 0x00000101 -config PINT3_ASSIGN - hex "PINT3_ASSIGN" - depends on PINTx_REASSIGN - default 0x00000101 -config PINT4_ASSIGN - hex "PINT3_ASSIGN" - depends on PINTx_REASSIGN - default 0x00000101 -config PINT5_ASSIGN - hex "PINT3_ASSIGN" - depends on PINTx_REASSIGN - default 0x00000101 - -endmenu - config SEC_IRQ_PRIORITY_LEVELS int "SEC interrupt priority levels" default 7 range 0 7 help - Devide the total number of interrupt priority levels into sub-levels. + Divide the total number of interrupt priority levels into sub-levels. There is 2 ^ (SEC_IRQ_PRIORITY_LEVELS + 1) different levels. +config L1_PARITY_CHECK + bool "Enable L1 parity check" + default n + help + Enable the L1 parity check in L1 sram. A fault event is raised + when L1 parity error is found. + +comment "System Cross Bar Priority Assignment" + +config SCB_PRIORITY + bool "Init System Cross Bar Priority" + default n + +menuconfig SCB0_MI0 + bool "SCB0 Master Interface 0 (DDR)" + default n + depends on SCB_PRIORITY + help + The slave interface id of each slot should be set according following table. + Core 0 -- 0 + Core 1 -- 2 + SCB1 -- 9 + SCB2 -- 10 + SCB3 -- 11 + SCB4 -- 12 + SCB5 -- 5 + SCB6 -- 6 + SCB7 -- 8 + SCB8 -- 7 + SCB9 -- 4 + USB -- 13 + +if SCB0_MI0 + +config SCB0_MI0_SLOT0 + int "Slot 0 slave interface id" + default 0 + range 0 13 + +config SCB0_MI0_SLOT1 + int "Slot 1 slave interface id" + default 2 + range 0 13 + +config SCB0_MI0_SLOT2 + int "Slot 2 slave interface id" + default 4 + range 0 13 + +config SCB0_MI0_SLOT3 + int "Slot 3 slave interface id" + default 5 + range 0 13 + +config SCB0_MI0_SLOT4 + int "Slot 4 slave interface id" + default 6 + range 0 13 + +config SCB0_MI0_SLOT5 + int "Slot 5 slave interface id" + default 7 + range 0 13 + +config SCB0_MI0_SLOT6 + int "Slot 6 slave interface id" + default 8 + range 0 13 + +config SCB0_MI0_SLOT7 + int "Slot 7 slave interface id" + default 9 + range 0 13 + +config SCB0_MI0_SLOT8 + int "Slot 8 slave interface id" + default 10 + range 0 13 + +config SCB0_MI0_SLOT9 + int "Slot 9 slave interface id" + default 11 + range 0 13 + +config SCB0_MI0_SLOT10 + int "Slot 10 slave interface id" + default 13 + range 0 13 + +config SCB0_MI0_SLOT11 + int "Slot 11 slave interface id" + default 12 + range 0 13 + +config SCB0_MI0_SLOT12 + int "Slot 12 slave interface id" + default 0 + range 0 13 + +config SCB0_MI0_SLOT13 + int "Slot 13 slave interface id" + default 2 + range 0 13 + +config SCB0_MI0_SLOT14 + int "Slot 14 slave interface id" + default 4 + range 0 13 + +config SCB0_MI0_SLOT15 + int "Slot 15 slave interface id" + default 5 + range 0 13 + +config SCB0_MI0_SLOT16 + int "Slot 16 slave interface id" + default 6 + range 0 13 + +config SCB0_MI0_SLOT17 + int "Slot 17 slave interface id" + default 7 + range 0 13 + +config SCB0_MI0_SLOT18 + int "Slot 18 slave interface id" + default 8 + range 0 13 + +config SCB0_MI0_SLOT19 + int "Slot 19 slave interface id" + default 9 + range 0 13 + +config SCB0_MI0_SLOT20 + int "Slot 20 slave interface id" + default 10 + range 0 13 + +config SCB0_MI0_SLOT21 + int "Slot 21 slave interface id" + default 11 + range 0 13 + +config SCB0_MI0_SLOT22 + int "Slot 22 slave interface id" + default 13 + range 0 13 + +config SCB0_MI0_SLOT23 + int "Slot 23 slave interface id" + default 12 + range 0 13 + +config SCB0_MI0_SLOT24 + int "Slot 24 slave interface id" + default 0 + range 0 13 + +config SCB0_MI0_SLOT25 + int "Slot 25 slave interface id" + default 2 + range 0 13 + +config SCB0_MI0_SLOT26 + int "Slot 26 slave interface id" + default 4 + range 0 13 + +config SCB0_MI0_SLOT27 + int "Slot 27 slave interface id" + default 5 + range 0 13 + +config SCB0_MI0_SLOT28 + int "Slot 28 slave interface id" + default 6 + range 0 13 + +config SCB0_MI0_SLOT29 + int "Slot 29 slave interface id" + default 7 + range 0 13 + +config SCB0_MI0_SLOT30 + int "Slot 30 slave interface id" + default 8 + range 0 13 + +config SCB0_MI0_SLOT31 + int "Slot 31 slave interface id" + default 13 + range 0 13 + +endif # SCB0_MI0 + +menuconfig SCB0_MI1 + bool "SCB0 Master Interface 1 (SMC)" + default n + depends on SCB_PRIORITY + help + The slave interface id of each slot should be set according following table. + Core 0 -- 0 + Core 1 -- 2 + SCB1 -- 9 + SCB2 -- 10 + SCB3 -- 11 + SCB4 -- 12 + SCB5 -- 5 + SCB6 -- 6 + SCB7 -- 8 + SCB8 -- 7 + SCB9 -- 4 + USB -- 13 + +if SCB0_MI1 + +config SCB0_MI1_SLOT0 + int "Slot 0 slave interface id" + default 0 + range 0 13 + +config SCB0_MI1_SLOT1 + int "Slot 1 slave interface id" + default 2 + range 0 13 + +config SCB0_MI1_SLOT2 + int "Slot 2 slave interface id" + default 4 + range 0 13 + +config SCB0_MI1_SLOT3 + int "Slot 3 slave interface id" + default 5 + range 0 13 + +config SCB0_MI1_SLOT4 + int "Slot 4 slave interface id" + default 6 + range 0 13 + +config SCB0_MI1_SLOT5 + int "Slot 5 slave interface id" + default 7 + range 0 13 + +config SCB0_MI1_SLOT6 + int "Slot 6 slave interface id" + default 8 + range 0 13 + +config SCB0_MI1_SLOT7 + int "Slot 7 slave interface id" + default 9 + range 0 13 + +config SCB0_MI1_SLOT8 + int "Slot 8 slave interface id" + default 10 + range 0 13 + +config SCB0_MI1_SLOT9 + int "Slot 9 slave interface id" + default 11 + range 0 13 + +config SCB0_MI1_SLOT10 + int "Slot 10 slave interface id" + default 13 + range 0 13 + +config SCB0_MI1_SLOT11 + int "Slot 11 slave interface id" + default 12 + range 0 13 + +config SCB0_MI1_SLOT12 + int "Slot 12 slave interface id" + default 0 + range 0 13 + +config SCB0_MI1_SLOT13 + int "Slot 13 slave interface id" + default 2 + range 0 13 + +config SCB0_MI1_SLOT14 + int "Slot 14 slave interface id" + default 4 + range 0 13 + +config SCB0_MI1_SLOT15 + int "Slot 15 slave interface id" + default 5 + range 0 13 + +config SCB0_MI1_SLOT16 + int "Slot 16 slave interface id" + default 6 + range 0 13 + +config SCB0_MI1_SLOT17 + int "Slot 17 slave interface id" + default 7 + range 0 13 + +config SCB0_MI1_SLOT18 + int "Slot 18 slave interface id" + default 8 + range 0 13 + +config SCB0_MI1_SLOT19 + int "Slot 19 slave interface id" + default 9 + range 0 13 + +config SCB0_MI1_SLOT20 + int "Slot 20 slave interface id" + default 10 + range 0 13 + +config SCB0_MI1_SLOT21 + int "Slot 21 slave interface id" + default 11 + range 0 13 + +config SCB0_MI1_SLOT22 + int "Slot 22 slave interface id" + default 13 + range 0 13 + +config SCB0_MI1_SLOT23 + int "Slot 23 slave interface id" + default 12 + range 0 13 + +config SCB0_MI1_SLOT24 + int "Slot 24 slave interface id" + default 0 + range 0 13 + +config SCB0_MI1_SLOT25 + int "Slot 25 slave interface id" + default 2 + range 0 13 + +config SCB0_MI1_SLOT26 + int "Slot 26 slave interface id" + default 4 + range 0 13 + +config SCB0_MI1_SLOT27 + int "Slot 27 slave interface id" + default 5 + range 0 13 + +config SCB0_MI1_SLOT28 + int "Slot 28 slave interface id" + default 6 + range 0 13 + +config SCB0_MI1_SLOT29 + int "Slot 29 slave interface id" + default 7 + range 0 13 + +config SCB0_MI1_SLOT30 + int "Slot 30 slave interface id" + default 8 + range 0 13 + +config SCB0_MI1_SLOT31 + int "Slot 31 slave interface id" + default 13 + range 0 13 + +endif # SCB0_MI1 + +menuconfig SCB0_MI2 + bool "SCB0 Master Interface 2 (Data L2)" + default n + depends on SCB_PRIORITY + help + The slave interface id of each slot should be set according following table. + Core 0 -- 0 + Core 1 -- 2 + SCB1 -- 9 + SCB2 -- 10 + SCB3 -- 11 + SCB4 -- 12 + SCB5 -- 5 + SCB6 -- 6 + SCB7 -- 8 + SCB8 -- 7 + SCB9 -- 4 + USB -- 13 + +if SCB0_MI2 + +config SCB0_MI2_SLOT0 + int "Slot 0 slave interface id" + default 4 + range 0 13 + +config SCB0_MI2_SLOT1 + int "Slot 1 slave interface id" + default 5 + range 0 13 + +config SCB0_MI2_SLOT2 + int "Slot 2 slave interface id" + default 6 + range 0 13 + +config SCB0_MI2_SLOT3 + int "Slot 3 slave interface id" + default 7 + range 0 13 + +config SCB0_MI2_SLOT4 + int "Slot 4 slave interface id" + default 8 + range 0 13 + +config SCB0_MI2_SLOT5 + int "Slot 5 slave interface id" + default 9 + range 0 13 + +config SCB0_MI2_SLOT6 + int "Slot 6 slave interface id" + default 10 + range 0 13 + +config SCB0_MI2_SLOT7 + int "Slot 7 slave interface id" + default 11 + range 0 13 + +config SCB0_MI2_SLOT8 + int "Slot 8 slave interface id" + default 13 + range 0 13 + +config SCB0_MI2_SLOT9 + int "Slot 9 slave interface id" + default 12 + range 0 13 + +config SCB0_MI2_SLOT10 + int "Slot 10 slave interface id" + default 4 + range 0 13 + +config SCB0_MI2_SLOT11 + int "Slot 11 slave interface id" + default 5 + range 0 13 + +config SCB0_MI2_SLOT12 + int "Slot 12 slave interface id" + default 6 + range 0 13 + +config SCB0_MI2_SLOT13 + int "Slot 13 slave interface id" + default 7 + range 0 13 + +config SCB0_MI2_SLOT14 + int "Slot 14 slave interface id" + default 8 + range 0 13 + +config SCB0_MI2_SLOT15 + int "Slot 15 slave interface id" + default 9 + range 0 13 + +config SCB0_MI2_SLOT16 + int "Slot 16 slave interface id" + default 10 + range 0 13 + +config SCB0_MI2_SLOT17 + int "Slot 17 slave interface id" + default 11 + range 0 13 + +config SCB0_MI2_SLOT18 + int "Slot 18 slave interface id" + default 13 + range 0 13 + +config SCB0_MI2_SLOT19 + int "Slot 19 slave interface id" + default 12 + range 0 13 + +config SCB0_MI2_SLOT20 + int "Slot 20 slave interface id" + default 4 + range 0 13 + +config SCB0_MI2_SLOT21 + int "Slot 21 slave interface id" + default 5 + range 0 13 + +config SCB0_MI2_SLOT22 + int "Slot 22 slave interface id" + default 6 + range 0 13 + +config SCB0_MI2_SLOT23 + int "Slot 23 slave interface id" + default 7 + range 0 13 + +config SCB0_MI2_SLOT24 + int "Slot 24 slave interface id" + default 8 + range 0 13 + +config SCB0_MI2_SLOT25 + int "Slot 25 slave interface id" + default 9 + range 0 13 + +config SCB0_MI2_SLOT26 + int "Slot 26 slave interface id" + default 10 + range 0 13 + +config SCB0_MI2_SLOT27 + int "Slot 27 slave interface id" + default 11 + range 0 13 + +config SCB0_MI2_SLOT28 + int "Slot 28 slave interface id" + default 13 + range 0 13 + +config SCB0_MI2_SLOT29 + int "Slot 29 slave interface id" + default 12 + range 0 13 + +config SCB0_MI2_SLOT30 + int "Slot 30 slave interface id" + default 4 + range 0 13 + +config SCB0_MI2_SLOT31 + int "Slot 31 slave interface id" + default 7 + range 0 13 + +endif # SCB0_MI2 + +menuconfig SCB0_MI3 + bool "SCB0 Master Interface 3 (L1A)" + default n + depends on SCB_PRIORITY + help + The slave interface id of each slot should be set according following table. + Core 0 -- 0 + Core 1 -- 2 + SCB1 -- 9 + SCB2 -- 10 + SCB3 -- 11 + SCB4 -- 12 + SCB5 -- 5 + SCB6 -- 6 + SCB7 -- 8 + SCB8 -- 7 + SCB9 -- 4 + USB -- 13 + +if SCB0_MI3 + +config SCB0_MI3_SLOT0 + int "Slot 0 slave interface id" + default 4 + range 0 13 + +config SCB0_MI3_SLOT1 + int "Slot 1 slave interface id" + default 5 + range 0 13 + +config SCB0_MI3_SLOT2 + int "Slot 2 slave interface id" + default 6 + range 0 13 + +config SCB0_MI3_SLOT3 + int "Slot 3 slave interface id" + default 7 + range 0 13 + +config SCB0_MI3_SLOT4 + int "Slot 4 slave interface id" + default 8 + range 0 13 + +config SCB0_MI3_SLOT5 + int "Slot 5 slave interface id" + default 9 + range 0 13 + +config SCB0_MI3_SLOT6 + int "Slot 6 slave interface id" + default 10 + range 0 13 + +config SCB0_MI3_SLOT7 + int "Slot 7 slave interface id" + default 11 + range 0 13 + +config SCB0_MI3_SLOT8 + int "Slot 8 slave interface id" + default 13 + range 0 13 + +config SCB0_MI3_SLOT9 + int "Slot 9 slave interface id" + default 12 + range 0 13 + +config SCB0_MI3_SLOT10 + int "Slot 10 slave interface id" + default 4 + range 0 13 + +config SCB0_MI3_SLOT11 + int "Slot 11 slave interface id" + default 5 + range 0 13 + +config SCB0_MI3_SLOT12 + int "Slot 12 slave interface id" + default 6 + range 0 13 + +config SCB0_MI3_SLOT13 + int "Slot 13 slave interface id" + default 7 + range 0 13 + +config SCB0_MI3_SLOT14 + int "Slot 14 slave interface id" + default 8 + range 0 13 + +config SCB0_MI3_SLOT15 + int "Slot 15 slave interface id" + default 9 + range 0 13 + +config SCB0_MI3_SLOT16 + int "Slot 16 slave interface id" + default 10 + range 0 13 + +config SCB0_MI3_SLOT17 + int "Slot 17 slave interface id" + default 11 + range 0 13 + +config SCB0_MI3_SLOT18 + int "Slot 18 slave interface id" + default 13 + range 0 13 + +config SCB0_MI3_SLOT19 + int "Slot 19 slave interface id" + default 12 + range 0 13 + +config SCB0_MI3_SLOT20 + int "Slot 20 slave interface id" + default 4 + range 0 13 + +config SCB0_MI3_SLOT21 + int "Slot 21 slave interface id" + default 5 + range 0 13 + +config SCB0_MI3_SLOT22 + int "Slot 22 slave interface id" + default 6 + range 0 13 + +config SCB0_MI3_SLOT23 + int "Slot 23 slave interface id" + default 7 + range 0 13 + +config SCB0_MI3_SLOT24 + int "Slot 24 slave interface id" + default 8 + range 0 13 + +config SCB0_MI3_SLOT25 + int "Slot 25 slave interface id" + default 9 + range 0 13 + +config SCB0_MI3_SLOT26 + int "Slot 26 slave interface id" + default 10 + range 0 13 + +config SCB0_MI3_SLOT27 + int "Slot 27 slave interface id" + default 11 + range 0 13 + +config SCB0_MI3_SLOT28 + int "Slot 28 slave interface id" + default 13 + range 0 13 + +config SCB0_MI3_SLOT29 + int "Slot 29 slave interface id" + default 12 + range 0 13 + +config SCB0_MI3_SLOT30 + int "Slot 30 slave interface id" + default 4 + range 0 13 + +config SCB0_MI3_SLOT31 + int "Slot 31 slave interface id" + default 7 + range 0 13 + +endif # SCB0_MI3 + +menuconfig SCB0_MI4 + bool "SCB0 Master Interface 4 (L1B)" + default n + depends on SCB_PRIORITY + help + The slave interface id of each slot should be set according following table. + Core 0 -- 0 + Core 1 -- 2 + SCB1 -- 9 + SCB2 -- 10 + SCB3 -- 11 + SCB4 -- 12 + SCB5 -- 5 + SCB6 -- 6 + SCB7 -- 8 + SCB8 -- 7 + SCB9 -- 4 + USB -- 13 + +if SCB0_MI4 + +config SCB0_MI4_SLOT0 + int "Slot 0 slave interface id" + default 4 + range 0 13 + +config SCB0_MI4_SLOT1 + int "Slot 1 slave interface id" + default 5 + range 0 13 + +config SCB0_MI4_SLOT2 + int "Slot 2 slave interface id" + default 6 + range 0 13 + +config SCB0_MI4_SLOT3 + int "Slot 3 slave interface id" + default 7 + range 0 13 + +config SCB0_MI4_SLOT4 + int "Slot 4 slave interface id" + default 8 + range 0 13 + +config SCB0_MI4_SLOT5 + int "Slot 5 slave interface id" + default 9 + range 0 13 + +config SCB0_MI4_SLOT6 + int "Slot 6 slave interface id" + default 10 + range 0 13 + +config SCB0_MI4_SLOT7 + int "Slot 7 slave interface id" + default 11 + range 0 13 + +config SCB0_MI4_SLOT8 + int "Slot 8 slave interface id" + default 13 + range 0 13 + +config SCB0_MI4_SLOT9 + int "Slot 9 slave interface id" + default 12 + range 0 13 + +config SCB0_MI4_SLOT10 + int "Slot 10 slave interface id" + default 4 + range 0 13 + +config SCB0_MI4_SLOT11 + int "Slot 11 slave interface id" + default 5 + range 0 13 + +config SCB0_MI4_SLOT12 + int "Slot 12 slave interface id" + default 6 + range 0 13 + +config SCB0_MI4_SLOT13 + int "Slot 13 slave interface id" + default 7 + range 0 13 + +config SCB0_MI4_SLOT14 + int "Slot 14 slave interface id" + default 8 + range 0 13 + +config SCB0_MI4_SLOT15 + int "Slot 15 slave interface id" + default 9 + range 0 13 + +config SCB0_MI4_SLOT16 + int "Slot 16 slave interface id" + default 10 + range 0 13 + +config SCB0_MI4_SLOT17 + int "Slot 17 slave interface id" + default 11 + range 0 13 + +config SCB0_MI4_SLOT18 + int "Slot 18 slave interface id" + default 13 + range 0 13 + +config SCB0_MI4_SLOT19 + int "Slot 19 slave interface id" + default 12 + range 0 13 + +config SCB0_MI4_SLOT20 + int "Slot 20 slave interface id" + default 4 + range 0 13 + +config SCB0_MI4_SLOT21 + int "Slot 21 slave interface id" + default 5 + range 0 13 + +config SCB0_MI4_SLOT22 + int "Slot 22 slave interface id" + default 6 + range 0 13 + +config SCB0_MI4_SLOT23 + int "Slot 23 slave interface id" + default 7 + range 0 13 + +config SCB0_MI4_SLOT24 + int "Slot 24 slave interface id" + default 8 + range 0 13 + +config SCB0_MI4_SLOT25 + int "Slot 25 slave interface id" + default 9 + range 0 13 + +config SCB0_MI4_SLOT26 + int "Slot 26 slave interface id" + default 10 + range 0 13 + +config SCB0_MI4_SLOT27 + int "Slot 27 slave interface id" + default 11 + range 0 13 + +config SCB0_MI4_SLOT28 + int "Slot 28 slave interface id" + default 13 + range 0 13 + +config SCB0_MI4_SLOT29 + int "Slot 29 slave interface id" + default 12 + range 0 13 + +config SCB0_MI4_SLOT30 + int "Slot 30 slave interface id" + default 4 + range 0 13 + +config SCB0_MI4_SLOT31 + int "Slot 31 slave interface id" + default 7 + range 0 13 + +endif # SCB0_MI4 + +menuconfig SCB0_MI5 + bool "SCB0 Master Interface 5 (SMMR)" + default n + depends on SCB_PRIORITY + help + The slave interface id of each slot should be set according following table. + MMR0 -- 1 + MMR1 -- 3 + SCB2 -- 10 + SCB4 -- 12 + +if SCB0_MI5 + +config SCB0_MI5_SLOT0 + int "Slot 0 slave interface id" + default 1 + range 0 13 + +config SCB0_MI5_SLOT1 + int "Slot 1 slave interface id" + default 3 + range 0 13 + +config SCB0_MI5_SLOT2 + int "Slot 2 slave interface id" + default 10 + range 0 13 + +config SCB0_MI5_SLOT3 + int "Slot 3 slave interface id" + default 12 + range 0 13 + +config SCB0_MI5_SLOT4 + int "Slot 4 slave interface id" + default 1 + range 0 13 + +config SCB0_MI5_SLOT5 + int "Slot 5 slave interface id" + default 3 + range 0 13 + +config SCB0_MI5_SLOT6 + int "Slot 6 slave interface id" + default 10 + range 0 13 + +config SCB0_MI5_SLOT7 + int "Slot 7 slave interface id" + default 12 + range 0 13 + +config SCB0_MI5_SLOT8 + int "Slot 8 slave interface id" + default 1 + range 0 13 + +config SCB0_MI5_SLOT9 + int "Slot 9 slave interface id" + default 3 + range 0 13 + +config SCB0_MI5_SLOT10 + int "Slot 10 slave interface id" + default 10 + range 0 13 + +config SCB0_MI5_SLOT11 + int "Slot 11 slave interface id" + default 12 + range 0 13 + +config SCB0_MI5_SLOT12 + int "Slot 12 slave interface id" + default 1 + range 0 13 + +config SCB0_MI5_SLOT13 + int "Slot 13 slave interface id" + default 3 + range 0 13 + +config SCB0_MI5_SLOT14 + int "Slot 14 slave interface id" + default 10 + range 0 13 + +config SCB0_MI5_SLOT15 + int "Slot 15 slave interface id" + default 12 + range 0 13 + +endif # SCB0_MI5 + +menuconfig SCB1_MI0 + bool "SCB1 Master Interface 0" + default n + depends on SCB_PRIORITY + help + The slave interface id of each slot should be set according following table. + SPORT0A -- 0 + SPORT0B -- 1 + SPORT1A -- 2 + SPORT1B -- 3 + SPORT2A -- 4 + SPORT2B -- 5 + SPI0TX -- 6 + SPI0RX -- 7 + SPI1TX -- 8 + SPI1RX -- 9 + +if SCB1_MI0 + +config SCB1_MI0_SLOT0 + int "Slot 0 slave interface id" + default 0 + range 0 9 + +config SCB1_MI0_SLOT1 + int "Slot 1 slave interface id" + default 1 + range 0 9 + +config SCB1_MI0_SLOT2 + int "Slot 2 slave interface id" + default 2 + range 0 9 + +config SCB1_MI0_SLOT3 + int "Slot 3 slave interface id" + default 3 + range 0 9 + +config SCB1_MI0_SLOT4 + int "Slot 4 slave interface id" + default 4 + range 0 9 + +config SCB1_MI0_SLOT5 + int "Slot 5 slave interface id" + default 5 + range 0 9 + +config SCB1_MI0_SLOT6 + int "Slot 6 slave interface id" + default 6 + range 0 9 + +config SCB1_MI0_SLOT7 + int "Slot 7 slave interface id" + default 7 + range 0 9 + +config SCB1_MI0_SLOT8 + int "Slot 8 slave interface id" + default 8 + range 0 9 + +config SCB1_MI0_SLOT9 + int "Slot 9 slave interface id" + default 9 + range 0 9 + +config SCB1_MI0_SLOT10 + int "Slot 10 slave interface id" + default 0 + range 0 9 + +config SCB1_MI0_SLOT11 + int "Slot 11 slave interface id" + default 1 + range 0 9 + +config SCB1_MI0_SLOT12 + int "Slot 12 slave interface id" + default 2 + range 0 9 + +config SCB1_MI0_SLOT13 + int "Slot 13 slave interface id" + default 3 + range 0 9 + +config SCB1_MI0_SLOT14 + int "Slot 14 slave interface id" + default 4 + range 0 9 + +config SCB1_MI0_SLOT15 + int "Slot 15 slave interface id" + default 5 + range 0 9 + +config SCB1_MI0_SLOT16 + int "Slot 16 slave interface id" + default 6 + range 0 13 + +config SCB1_MI0_SLOT17 + int "Slot 17 slave interface id" + default 7 + range 0 13 + +config SCB1_MI0_SLOT18 + int "Slot 18 slave interface id" + default 8 + range 0 13 + +config SCB1_MI0_SLOT19 + int "Slot 19 slave interface id" + default 9 + range 0 13 + +endif # SCB1_MI0 + +menuconfig SCB2_MI0 + bool "SCB2 Master Interface 0" + default n + depends on SCB_PRIORITY + help + The slave interface id of each slot should be set according following table. + RSI -- 0 + SDU DMA -- 1 + SDU -- 2 + EMAC0 -- 3 + EMAC1 -- 4 + +if SCB2_MI0 + +config SCB2_MI0_SLOT0 + int "Slot 0 slave interface id" + default 0 + range 0 4 + +config SCB2_MI0_SLOT1 + int "Slot 1 slave interface id" + default 1 + range 0 4 + +config SCB2_MI0_SLOT2 + int "Slot 2 slave interface id" + default 2 + range 0 4 + +config SCB2_MI0_SLOT3 + int "Slot 3 slave interface id" + default 3 + range 0 4 + +config SCB2_MI0_SLOT4 + int "Slot 4 slave interface id" + default 4 + range 0 4 + +config SCB2_MI0_SLOT5 + int "Slot 5 slave interface id" + default 0 + range 0 4 + +config SCB2_MI0_SLOT6 + int "Slot 6 slave interface id" + default 1 + range 0 4 + +config SCB2_MI0_SLOT7 + int "Slot 7 slave interface id" + default 2 + range 0 4 + +config SCB2_MI0_SLOT8 + int "Slot 8 slave interface id" + default 3 + range 0 4 + +config SCB2_MI0_SLOT9 + int "Slot 9 slave interface id" + default 4 + range 0 4 + +endif # SCB2_MI0 + +menuconfig SCB3_MI0 + bool "SCB3 Master Interface 0" + default n + depends on SCB_PRIORITY + help + The slave interface id of each slot should be set according following table. + LP0 -- 0 + LP1 -- 1 + LP2 -- 2 + LP3 -- 3 + UART0TX -- 4 + UART0RX -- 5 + UART1TX -- 4 + UART1RX -- 5 + +if SCB3_MI0 + +config SCB3_MI0_SLOT0 + int "Slot 0 slave interface id" + default 0 + range 0 7 + +config SCB3_MI0_SLOT1 + int "Slot 1 slave interface id" + default 1 + range 0 7 + +config SCB3_MI0_SLOT2 + int "Slot 2 slave interface id" + default 2 + range 0 7 + +config SCB3_MI0_SLOT3 + int "Slot 3 slave interface id" + default 3 + range 0 7 + +config SCB3_MI0_SLOT4 + int "Slot 4 slave interface id" + default 4 + range 0 7 + +config SCB3_MI0_SLOT5 + int "Slot 5 slave interface id" + default 5 + range 0 7 + +config SCB3_MI0_SLOT6 + int "Slot 6 slave interface id" + default 6 + range 0 7 + +config SCB3_MI0_SLOT7 + int "Slot 7 slave interface id" + default 7 + range 0 7 + +config SCB3_MI0_SLOT8 + int "Slot 8 slave interface id" + default 0 + range 0 7 + +config SCB3_MI0_SLOT9 + int "Slot 9 slave interface id" + default 1 + range 0 7 + +config SCB3_MI0_SLOT10 + int "Slot 10 slave interface id" + default 2 + range 0 7 + +config SCB3_MI0_SLOT11 + int "Slot 11 slave interface id" + default 3 + range 0 7 + +config SCB3_MI0_SLOT12 + int "Slot 12 slave interface id" + default 4 + range 0 7 + +config SCB3_MI0_SLOT13 + int "Slot 13 slave interface id" + default 5 + range 0 7 + +config SCB3_MI0_SLOT14 + int "Slot 14 slave interface id" + default 6 + range 0 7 + +config SCB3_MI0_SLOT15 + int "Slot 15 slave interface id" + default 7 + range 0 7 + +endif # SCB3_MI0 + +menuconfig SCB4_MI0 + bool "SCB4 Master Interface 0" + default n + depends on SCB_PRIORITY + help + The slave interface id of each slot should be set according following table. + MDA21 -- 0 + MDA22 -- 1 + MDA23 -- 2 + MDA24 -- 3 + MDA25 -- 4 + MDA26 -- 5 + MDA27 -- 6 + MDA28 -- 7 + +if SCB4_MI0 + +config SCB4_MI0_SLOT0 + int "Slot 0 slave interface id" + default 0 + range 0 7 + +config SCB4_MI0_SLOT1 + int "Slot 1 slave interface id" + default 1 + range 0 7 + +config SCB4_MI0_SLOT2 + int "Slot 2 slave interface id" + default 2 + range 0 7 + +config SCB4_MI0_SLOT3 + int "Slot 3 slave interface id" + default 3 + range 0 7 + +config SCB4_MI0_SLOT4 + int "Slot 4 slave interface id" + default 4 + range 0 7 + +config SCB4_MI0_SLOT5 + int "Slot 5 slave interface id" + default 5 + range 0 7 + +config SCB4_MI0_SLOT6 + int "Slot 6 slave interface id" + default 6 + range 0 7 + +config SCB4_MI0_SLOT7 + int "Slot 7 slave interface id" + default 7 + range 0 7 + +config SCB4_MI0_SLOT8 + int "Slot 8 slave interface id" + default 0 + range 0 7 + +config SCB4_MI0_SLOT9 + int "Slot 9 slave interface id" + default 1 + range 0 7 + +config SCB4_MI0_SLOT10 + int "Slot 10 slave interface id" + default 2 + range 0 7 + +config SCB4_MI0_SLOT11 + int "Slot 11 slave interface id" + default 3 + range 0 7 + +config SCB4_MI0_SLOT12 + int "Slot 12 slave interface id" + default 4 + range 0 7 + +config SCB4_MI0_SLOT13 + int "Slot 13 slave interface id" + default 5 + range 0 7 + +config SCB4_MI0_SLOT14 + int "Slot 14 slave interface id" + default 6 + range 0 7 + +config SCB4_MI0_SLOT15 + int "Slot 15 slave interface id" + default 7 + range 0 7 + +endif # SCB4_MI0 + +menuconfig SCB5_MI0 + bool "SCB5 Master Interface 0" + default n + depends on SCB_PRIORITY + help + The slave interface id of each slot should be set according following table. + PPI0 MDA29 -- 0 + PPI0 MDA30 -- 1 + PPI2 MDA31 -- 2 + PPI2 MDA32 -- 3 + +if SCB5_MI0 + +config SCB5_MI0_SLOT0 + int "Slot 0 slave interface id" + default 0 + range 0 3 + +config SCB5_MI0_SLOT1 + int "Slot 1 slave interface id" + default 1 + range 0 3 + +config SCB5_MI0_SLOT2 + int "Slot 2 slave interface id" + default 2 + range 0 3 + +config SCB5_MI0_SLOT3 + int "Slot 3 slave interface id" + default 3 + range 0 3 + +config SCB5_MI0_SLOT4 + int "Slot 4 slave interface id" + default 0 + range 0 3 + +config SCB5_MI0_SLOT5 + int "Slot 5 slave interface id" + default 1 + range 0 3 + +config SCB5_MI0_SLOT6 + int "Slot 6 slave interface id" + default 2 + range 0 3 + +config SCB5_MI0_SLOT7 + int "Slot 7 slave interface id" + default 3 + range 0 3 + +endif # SCB5_MI0 + +menuconfig SCB6_MI0 + bool "SCB6 Master Interface 0" + default n + depends on SCB_PRIORITY + help + The slave interface id of each slot should be set according following table. + PPI1 MDA33 -- 0 + PPI1 MDA34 -- 1 + +if SCB6_MI0 + +config SCB6_MI0_SLOT0 + int "Slot 0 slave interface id" + default 0 + range 0 1 + +config SCB6_MI0_SLOT1 + int "Slot 1 slave interface id" + default 1 + range 0 1 + +config SCB6_MI0_SLOT2 + int "Slot 2 slave interface id" + default 0 + range 0 1 + +config SCB6_MI0_SLOT3 + int "Slot 3 slave interface id" + default 1 + range 0 1 + +endif # SCB6_MI0 + +menuconfig SCB7_MI0 + bool "SCB7 Master Interface 0" + default n + depends on SCB_PRIORITY + help + The slave interface id of each slot should be set according following table. + PIXC0 -- 0 + PIXC1 -- 1 + PIXC2 -- 2 + +if SCB7_MI0 + +config SCB7_MI0_SLOT0 + int "Slot 0 slave interface id" + default 0 + range 0 2 + +config SCB7_MI0_SLOT1 + int "Slot 1 slave interface id" + default 1 + range 0 2 + +config SCB7_MI0_SLOT2 + int "Slot 2 slave interface id" + default 2 + range 0 2 + +config SCB7_MI0_SLOT3 + int "Slot 3 slave interface id" + default 0 + range 0 2 + +config SCB7_MI0_SLOT4 + int "Slot 4 slave interface id" + default 1 + range 0 2 + +config SCB7_MI0_SLOT5 + int "Slot 5 slave interface id" + default 2 + range 0 2 + +endif # SCB7_MI0 + +menuconfig SCB8_MI0 + bool "SCB8 Master Interface 0" + default n + depends on SCB_PRIORITY + help + The slave interface id of each slot should be set according following table. + PVP CPDOB -- 0 + PVP CPDOC -- 1 + PVP CPCO -- 2 + PVP CPCI -- 3 + +if SCB8_MI0 + +config SCB8_MI0_SLOT0 + int "Slot 0 slave interface id" + default 0 + range 0 3 + +config SCB8_MI0_SLOT1 + int "Slot 1 slave interface id" + default 1 + range 0 3 + +config SCB8_MI0_SLOT2 + int "Slot 2 slave interface id" + default 2 + range 0 3 + +config SCB8_MI0_SLOT3 + int "Slot 3 slave interface id" + default 3 + range 0 3 + +config SCB8_MI0_SLOT4 + int "Slot 4 slave interface id" + default 0 + range 0 3 + +config SCB8_MI0_SLOT5 + int "Slot 5 slave interface id" + default 1 + range 0 3 + +config SCB8_MI0_SLOT6 + int "Slot 6 slave interface id" + default 2 + range 0 3 + +config SCB8_MI0_SLOT7 + int "Slot 7 slave interface id" + default 3 + range 0 3 + +endif # SCB8_MI0 + +menuconfig SCB9_MI0 + bool "SCB9 Master Interface 0" + default n + depends on SCB_PRIORITY + help + The slave interface id of each slot should be set according following table. + PVP MPDO -- 0 + PVP MPDI -- 1 + PVP MPCO -- 2 + PVP MPCI -- 3 + PVP CPDOA -- 4 + +if SCB9_MI0 + +config SCB9_MI0_SLOT0 + int "Slot 0 slave interface id" + default 0 + range 0 4 + +config SCB9_MI0_SLOT1 + int "Slot 1 slave interface id" + default 1 + range 0 4 + +config SCB9_MI0_SLOT2 + int "Slot 2 slave interface id" + default 2 + range 0 4 + +config SCB9_MI0_SLOT3 + int "Slot 3 slave interface id" + default 3 + range 0 4 + +config SCB9_MI0_SLOT4 + int "Slot 4 slave interface id" + default 4 + range 0 4 + +config SCB9_MI0_SLOT5 + int "Slot 5 slave interface id" + default 0 + range 0 4 + +config SCB9_MI0_SLOT6 + int "Slot 6 slave interface id" + default 1 + range 0 4 + +config SCB9_MI0_SLOT7 + int "Slot 7 slave interface id" + default 2 + range 0 4 + +config SCB9_MI0_SLOT8 + int "Slot 8 slave interface id" + default 3 + range 0 4 + +config SCB9_MI0_SLOT9 + int "Slot 9 slave interface id" + default 4 + range 0 4 + +endif # SCB9_MI0 + endmenu endif diff --git a/arch/blackfin/mach-bf609/Makefile b/arch/blackfin/mach-bf609/Makefile index 234fe1b4bb0..60ffaf85d30 100644 --- a/arch/blackfin/mach-bf609/Makefile +++ b/arch/blackfin/mach-bf609/Makefile @@ -4,3 +4,4 @@ obj-y := dma.o clock.o ints-priority.o obj-$(CONFIG_PM) += pm.o dpm.o +obj-$(CONFIG_SCB_PRIORITY) += scb.o diff --git a/arch/blackfin/mach-bf609/boards/ezkit.c b/arch/blackfin/mach-bf609/boards/ezkit.c index 61c1f47a4bf..e2c0b024ce8 100644 --- a/arch/blackfin/mach-bf609/boards/ezkit.c +++ b/arch/blackfin/mach-bf609/boards/ezkit.c @@ -17,7 +17,10 @@ #include <linux/i2c.h> #include <linux/interrupt.h> #include <linux/usb/musb.h> -#include <asm/bfin6xx_spi.h> +#include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/platform_data/pinctrl-adi2.h> +#include <linux/spi/adi_spi3.h> #include <asm/dma.h> #include <asm/gpio.h> #include <asm/nand.h> @@ -36,7 +39,7 @@ const char bfin_board_name[] = "ADI BF609-EZKIT"; * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) #include <linux/usb/isp1760.h> static struct resource bfin_isp1760_resources[] = { [0] = { @@ -71,7 +74,7 @@ static struct platform_device bfin_isp1760_device = { }; #endif -#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) +#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY) #include <asm/bfin_rotary.h> static struct bfin_rotary_platform_data bfin_rotary_data = { @@ -102,21 +105,34 @@ static struct platform_device bfin_rotary_device = { }; #endif -#if defined(CONFIG_STMMAC_ETH) || defined(CONFIG_STMMAC_ETH_MODULE) +#if IS_ENABLED(CONFIG_STMMAC_ETH) #include <linux/stmmac.h> - -static unsigned short pins[] = P_RMII0; +#include <linux/phy.h> static struct stmmac_mdio_bus_data phy_private_data = { - .bus_id = 0, .phy_mask = 1, }; +static struct stmmac_dma_cfg eth_dma_cfg = { + .pbl = 2, +}; + +int stmmac_ptp_clk_init(struct platform_device *pdev, void *priv) +{ + bfin_write32(PADS0_EMAC_PTP_CLKSEL, 0); + return 0; +} + static struct plat_stmmacenet_data eth_private_data = { + .has_gmac = 1, .bus_id = 0, .enh_desc = 1, .phy_addr = 1, .mdio_bus_data = &phy_private_data, + .dma_cfg = ð_dma_cfg, + .force_thresh_dma_mode = 1, + .interface = PHY_INTERFACE_MODE_RMII, + .init = stmmac_ptp_clk_init, }; static struct platform_device bfin_eth_device = { @@ -143,7 +159,7 @@ static struct platform_device bfin_eth_device = { }; #endif -#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE) +#if IS_ENABLED(CONFIG_INPUT_ADXL34X) #include <linux/input/adxl34x.h> static const struct adxl34x_platform_data adxl34x_info = { .x_axis_offset = 0, @@ -182,14 +198,14 @@ static const struct adxl34x_platform_data adxl34x_info = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -197,6 +213,18 @@ static struct resource bfin_uart0_resources[] = { .end = UART0_RXDIV+4, .flags = IORESOURCE_MEM, }, +#ifdef CONFIG_EARLY_PRINTK + { + .start = PORTD_FER, + .end = PORTD_FER+2, + .flags = IORESOURCE_REG, + }, + { + .start = PORTD_MUX, + .end = PORTD_MUX+3, + .flags = IORESOURCE_REG, + }, +#endif { .start = IRQ_UART0_TX, .end = IRQ_UART0_TX, @@ -261,6 +289,13 @@ static struct resource bfin_uart1_resources[] = { .end = UART1_RXDIV+4, .flags = IORESOURCE_MEM, }, +#ifdef CONFIG_EARLY_PRINTK + { + .start = PORTG_FER_SET, + .end = PORTG_FER_SET+2, + .flags = IORESOURCE_REG, + }, +#endif { .start = IRQ_UART1_TX, .end = IRQ_UART1_TX, @@ -320,7 +355,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -373,7 +408,7 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) static struct resource musb_resources[] = { [0] = { .start = 0xFFCC1000, @@ -429,7 +464,7 @@ static struct platform_device musb_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -534,7 +569,7 @@ static struct platform_device bfin_sport2_uart_device = { #endif #endif -#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) +#if IS_ENABLED(CONFIG_CAN_BFIN) static unsigned short bfin_can0_peripherals[] = { P_CAN0_RX, P_CAN0_TX, 0 @@ -575,7 +610,7 @@ static struct platform_device bfin_can0_device = { #endif -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) static struct mtd_partition partition_info[] = { { .name = "bootloader(nand)", @@ -625,7 +660,7 @@ static struct platform_device bfin_nand_device = { }; #endif -#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SDH_BFIN) static struct bfin_sd_host bfin_sdh_data = { .dma_chan = CH_RSI, @@ -642,7 +677,7 @@ static struct platform_device bfin_sdh_device = { }; #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition ezkit_partitions[] = { { .name = "bootloader(nor)", @@ -659,16 +694,9 @@ static struct mtd_partition ezkit_partitions[] = { }, }; -int bf609_nor_flash_init(struct platform_device *dev) +int bf609_nor_flash_init(struct platform_device *pdev) { #define CONFIG_SMC_GCTL_VAL 0x00000010 - const unsigned short pins[] = { - P_A3, P_A4, P_A5, P_A6, P_A7, P_A8, P_A9, P_A10, P_A11, P_A12, - P_A13, P_A14, P_A15, P_A16, P_A17, P_A18, P_A19, P_A20, P_A21, - P_A22, P_A23, P_A24, P_A25, P_NORCK, 0, - }; - - peripheral_request_list(pins, "smc0"); bfin_write32(SMC_GCTL, CONFIG_SMC_GCTL_VAL); bfin_write32(SMC_B0CTL, 0x01002011); @@ -677,16 +705,8 @@ int bf609_nor_flash_init(struct platform_device *dev) return 0; } -void bf609_nor_flash_exit(struct platform_device *dev) +void bf609_nor_flash_exit(struct platform_device *pdev) { - const unsigned short pins[] = { - P_A3, P_A4, P_A5, P_A6, P_A7, P_A8, P_A9, P_A10, P_A11, P_A12, - P_A13, P_A14, P_A15, P_A16, P_A17, P_A18, P_A19, P_A20, P_A21, - P_A22, P_A23, P_A24, P_A25, P_NORCK, 0, - }; - - peripheral_free_list(pins); - bfin_write32(SMC_GCTL, 0); } @@ -718,8 +738,7 @@ static struct platform_device ezkit_flash_device = { }; #endif -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) /* SPI flash chip (w25q32) */ static struct mtd_partition bfin_spi_flash_partitions[] = { { @@ -745,26 +764,25 @@ static struct flash_platform_data bfin_spi_flash_data = { .type = "w25q32", }; -static struct bfin6xx_spi_chip spi_flash_chip_info = { +static struct adi_spi3_chip spi_flash_chip_info = { .enable_dma = true, /* use dma transfer with this chip*/ }; #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) -static struct bfin6xx_spi_chip spidev_chip_info = { +#if IS_ENABLED(CONFIG_SPI_SPIDEV) +static struct adi_spi3_chip spidev_chip_info = { .enable_dma = true, }; #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) static struct platform_device bfin_i2s_pcm = { .name = "bfin-i2s-pcm-audio", .id = -1, }; #endif -#if defined(CONFIG_SND_BF6XX_SOC_I2S) || \ - defined(CONFIG_SND_BF6XX_SOC_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF6XX_SOC_I2S) #include <asm/bfin_sport3.h> static struct resource bfin_snd_resources[] = { { @@ -818,10 +836,9 @@ static struct platform_device bfin_i2s = { }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \ - || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) static const char * const ad1836_link[] = { - "bfin-tdm.0", + "bfin-i2s.0", "spi0.76", }; static struct platform_device bfin_ad1836_machine = { @@ -833,14 +850,13 @@ static struct platform_device bfin_ad1836_machine = { }; #endif -#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61) || \ - defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61) static struct platform_device adau1761_device = { .name = "bfin-eval-adau1x61", }; #endif -#if defined(CONFIG_SND_SOC_ADAU1761) || defined(CONFIG_SND_SOC_ADAU1761_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_ADAU1761) #include <sound/adau17x1.h> static struct adau1761_platform_data adau1761_info = { .lineout_mode = ADAU1761_OUTPUT_MODE_LINE, @@ -848,8 +864,7 @@ static struct adau1761_platform_data adau1761_info = { }; #endif -#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \ - || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE) #include <linux/videodev2.h> #include <media/blackfin/bfin_capture.h> #include <media/blackfin/ppi.h> @@ -859,7 +874,7 @@ static const unsigned short ppi_req[] = { P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7, P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11, P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15, -#if !defined(CONFIG_VIDEO_VS6624) && !defined(CONFIG_VIDEO_VS6624_MODULE) +#if !IS_ENABLED(CONFIG_VIDEO_VS6624) P_PPI0_D16, P_PPI0_D17, P_PPI0_D18, P_PPI0_D19, P_PPI0_D20, P_PPI0_D21, P_PPI0_D22, P_PPI0_D23, #endif @@ -875,8 +890,7 @@ static const struct ppi_info ppi_info = { .pin_req = ppi_req, }; -#if defined(CONFIG_VIDEO_VS6624) \ - || defined(CONFIG_VIDEO_VS6624_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_VS6624) static struct v4l2_input vs6624_inputs[] = { { .index = 0, @@ -913,8 +927,7 @@ static struct bfin_capture_config bfin_capture_data = { }; #endif -#if defined(CONFIG_VIDEO_ADV7842) \ - || defined(CONFIG_VIDEO_ADV7842_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_ADV7842) #include <media/adv7842.h> static struct v4l2_input adv7842_inputs[] = { @@ -936,19 +949,19 @@ static struct v4l2_input adv7842_inputs[] = { .index = 2, .name = "Component", .type = V4L2_INPUT_TYPE_CAMERA, - .capabilities = V4L2_IN_CAP_CUSTOM_TIMINGS, + .capabilities = V4L2_IN_CAP_DV_TIMINGS, }, { .index = 3, .name = "VGA", .type = V4L2_INPUT_TYPE_CAMERA, - .capabilities = V4L2_IN_CAP_CUSTOM_TIMINGS, + .capabilities = V4L2_IN_CAP_DV_TIMINGS, }, { .index = 4, .name = "HDMI", .type = V4L2_INPUT_TYPE_CAMERA, - .capabilities = V4L2_IN_CAP_CUSTOM_TIMINGS, + .capabilities = V4L2_IN_CAP_DV_TIMINGS, }, }; @@ -1002,7 +1015,9 @@ static struct adv7842_platform_data adv7842_data = { .ain_sel = ADV7842_AIN10_11_12_NC_SYNC_4_1, .prim_mode = ADV7842_PRIM_MODE_SDP, .vid_std_select = ADV7842_SDP_VID_STD_CVBS_SD_4x1, - .inp_color_space = ADV7842_INP_COLOR_SPACE_AUTO, + .hdmi_free_run_enable = 1, + .sdp_free_run_auto = 1, + .llc_dll_phase = 0x10, .i2c_sdp_io = 0x40, .i2c_sdp = 0x41, .i2c_cp = 0x42, @@ -1042,8 +1057,7 @@ static struct platform_device bfin_capture_device = { }; #endif -#if defined(CONFIG_VIDEO_BLACKFIN_DISPLAY) \ - || defined(CONFIG_VIDEO_BLACKFIN_DISPLAY_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_DISPLAY) #include <linux/videodev2.h> #include <media/blackfin/bfin_display.h> #include <media/blackfin/ppi.h> @@ -1065,8 +1079,7 @@ static const struct ppi_info ppi_info = { .pin_req = ppi_req_disp, }; -#if defined(CONFIG_VIDEO_ADV7511) \ - || defined(CONFIG_VIDEO_ADV7511_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_ADV7511) #include <media/adv7511.h> static struct v4l2_output adv7511_outputs[] = { @@ -1074,7 +1087,7 @@ static struct v4l2_output adv7511_outputs[] = { .index = 0, .name = "HDMI", .type = V4L2_INPUT_TYPE_CAMERA, - .capabilities = V4L2_OUT_CAP_CUSTOM_TIMINGS, + .capabilities = V4L2_OUT_CAP_DV_TIMINGS, }, }; @@ -1108,6 +1121,81 @@ static struct bfin_display_config bfin_display_data = { }; #endif +#if IS_ENABLED(CONFIG_VIDEO_ADV7343) +#include <media/adv7343.h> + +static struct v4l2_output adv7343_outputs[] = { + { + .index = 0, + .name = "Composite", + .type = V4L2_OUTPUT_TYPE_ANALOG, + .std = V4L2_STD_ALL, + .capabilities = V4L2_OUT_CAP_STD, + }, + { + .index = 1, + .name = "S-Video", + .type = V4L2_OUTPUT_TYPE_ANALOG, + .std = V4L2_STD_ALL, + .capabilities = V4L2_OUT_CAP_STD, + }, + { + .index = 2, + .name = "Component", + .type = V4L2_OUTPUT_TYPE_ANALOG, + .std = V4L2_STD_ALL, + .capabilities = V4L2_OUT_CAP_STD, + }, + +}; + +static struct disp_route adv7343_routes[] = { + { + .output = ADV7343_COMPOSITE_ID, + }, + { + .output = ADV7343_SVIDEO_ID, + }, + { + .output = ADV7343_COMPONENT_ID, + }, +}; + +static struct adv7343_platform_data adv7343_data = { + .mode_config = { + .sleep_mode = false, + .pll_control = false, + .dac_1 = true, + .dac_2 = true, + .dac_3 = true, + .dac_4 = true, + .dac_5 = true, + .dac_6 = true, + }, + .sd_config = { + .sd_dac_out1 = false, + .sd_dac_out2 = false, + }, +}; + +static struct bfin_display_config bfin_display_data = { + .card_name = "BF609", + .outputs = adv7343_outputs, + .num_outputs = ARRAY_SIZE(adv7343_outputs), + .routes = adv7343_routes, + .i2c_adapter_id = 0, + .board_info = { + .type = "adv7343", + .addr = 0x2b, + .platform_data = (void *)&adv7343_data, + }, + .ppi_info = &ppi_info_disp, + .ppi_control = (PACK_EN | DLEN_8 | EPPI_CTL_FS1LO_FS2LO + | EPPI_CTL_POLC3 | EPPI_CTL_BLANKGEN | EPPI_CTL_SYNC2 + | EPPI_CTL_NON656 | EPPI_CTL_DIR), +}; +#endif + static struct platform_device bfin_display_device = { .name = "bfin_display", .dev = { @@ -1213,7 +1301,7 @@ static struct platform_device bfin_crypto_crc_device = { }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -1229,7 +1317,357 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { }; #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#ifdef CONFIG_PINCTRL_ADI2 + +# define ADI_PINT_DEVNAME "adi-gpio-pint" +# define ADI_GPIO_DEVNAME "adi-gpio" +# define ADI_PINCTRL_DEVNAME "pinctrl-adi2" + +static struct platform_device bfin_pinctrl_device = { + .name = ADI_PINCTRL_DEVNAME, + .id = 0, +}; + +static struct resource bfin_pint0_resources[] = { + { + .start = PINT0_MASK_SET, + .end = PINT0_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT0, + .end = IRQ_PINT0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint0_device = { + .name = ADI_PINT_DEVNAME, + .id = 0, + .num_resources = ARRAY_SIZE(bfin_pint0_resources), + .resource = bfin_pint0_resources, +}; + +static struct resource bfin_pint1_resources[] = { + { + .start = PINT1_MASK_SET, + .end = PINT1_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT1, + .end = IRQ_PINT1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint1_device = { + .name = ADI_PINT_DEVNAME, + .id = 1, + .num_resources = ARRAY_SIZE(bfin_pint1_resources), + .resource = bfin_pint1_resources, +}; + +static struct resource bfin_pint2_resources[] = { + { + .start = PINT2_MASK_SET, + .end = PINT2_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT2, + .end = IRQ_PINT2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint2_device = { + .name = ADI_PINT_DEVNAME, + .id = 2, + .num_resources = ARRAY_SIZE(bfin_pint2_resources), + .resource = bfin_pint2_resources, +}; + +static struct resource bfin_pint3_resources[] = { + { + .start = PINT3_MASK_SET, + .end = PINT3_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT3, + .end = IRQ_PINT3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint3_device = { + .name = ADI_PINT_DEVNAME, + .id = 3, + .num_resources = ARRAY_SIZE(bfin_pint3_resources), + .resource = bfin_pint3_resources, +}; + +static struct resource bfin_pint4_resources[] = { + { + .start = PINT4_MASK_SET, + .end = PINT4_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT4, + .end = IRQ_PINT4, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint4_device = { + .name = ADI_PINT_DEVNAME, + .id = 4, + .num_resources = ARRAY_SIZE(bfin_pint4_resources), + .resource = bfin_pint4_resources, +}; + +static struct resource bfin_pint5_resources[] = { + { + .start = PINT5_MASK_SET, + .end = PINT5_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT5, + .end = IRQ_PINT5, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint5_device = { + .name = ADI_PINT_DEVNAME, + .id = 5, + .num_resources = ARRAY_SIZE(bfin_pint5_resources), + .resource = bfin_pint5_resources, +}; + +static struct resource bfin_gpa_resources[] = { + { + .start = PORTA_FER, + .end = PORTA_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { /* optional */ + .start = IRQ_PA0, + .end = IRQ_PA0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpa_pdata = { + .port_pin_base = GPIO_PA0, + .port_width = GPIO_BANKSIZE, + .pint_id = 0, /* PINT0 */ + .pint_assign = true, /* PINT upper 16 bit */ + .pint_map = 0, /* mapping mask in PINT */ +}; + +static struct platform_device bfin_gpa_device = { + .name = ADI_GPIO_DEVNAME, + .id = 0, + .num_resources = ARRAY_SIZE(bfin_gpa_resources), + .resource = bfin_gpa_resources, + .dev = { + .platform_data = &bfin_gpa_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpb_resources[] = { + { + .start = PORTB_FER, + .end = PORTB_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PB0, + .end = IRQ_PB0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpb_pdata = { + .port_pin_base = GPIO_PB0, + .port_width = GPIO_BANKSIZE, + .pint_id = 0, + .pint_assign = false, + .pint_map = 1, +}; + +static struct platform_device bfin_gpb_device = { + .name = ADI_GPIO_DEVNAME, + .id = 1, + .num_resources = ARRAY_SIZE(bfin_gpb_resources), + .resource = bfin_gpb_resources, + .dev = { + .platform_data = &bfin_gpb_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpc_resources[] = { + { + .start = PORTC_FER, + .end = PORTC_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PC0, + .end = IRQ_PC0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpc_pdata = { + .port_pin_base = GPIO_PC0, + .port_width = GPIO_BANKSIZE, + .pint_id = 1, + .pint_assign = false, + .pint_map = 1, +}; + +static struct platform_device bfin_gpc_device = { + .name = ADI_GPIO_DEVNAME, + .id = 2, + .num_resources = ARRAY_SIZE(bfin_gpc_resources), + .resource = bfin_gpc_resources, + .dev = { + .platform_data = &bfin_gpc_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpd_resources[] = { + { + .start = PORTD_FER, + .end = PORTD_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PD0, + .end = IRQ_PD0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpd_pdata = { + .port_pin_base = GPIO_PD0, + .port_width = GPIO_BANKSIZE, + .pint_id = 2, + .pint_assign = false, + .pint_map = 1, +}; + +static struct platform_device bfin_gpd_device = { + .name = ADI_GPIO_DEVNAME, + .id = 3, + .num_resources = ARRAY_SIZE(bfin_gpd_resources), + .resource = bfin_gpd_resources, + .dev = { + .platform_data = &bfin_gpd_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpe_resources[] = { + { + .start = PORTE_FER, + .end = PORTE_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PE0, + .end = IRQ_PE0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpe_pdata = { + .port_pin_base = GPIO_PE0, + .port_width = GPIO_BANKSIZE, + .pint_id = 3, + .pint_assign = false, + .pint_map = 1, +}; + +static struct platform_device bfin_gpe_device = { + .name = ADI_GPIO_DEVNAME, + .id = 4, + .num_resources = ARRAY_SIZE(bfin_gpe_resources), + .resource = bfin_gpe_resources, + .dev = { + .platform_data = &bfin_gpe_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpf_resources[] = { + { + .start = PORTF_FER, + .end = PORTF_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PF0, + .end = IRQ_PF0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpf_pdata = { + .port_pin_base = GPIO_PF0, + .port_width = GPIO_BANKSIZE, + .pint_id = 4, + .pint_assign = false, + .pint_map = 1, +}; + +static struct platform_device bfin_gpf_device = { + .name = ADI_GPIO_DEVNAME, + .id = 5, + .num_resources = ARRAY_SIZE(bfin_gpf_resources), + .resource = bfin_gpf_resources, + .dev = { + .platform_data = &bfin_gpf_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpg_resources[] = { + { + .start = PORTG_FER, + .end = PORTG_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PG0, + .end = IRQ_PG0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpg_pdata = { + .port_pin_base = GPIO_PG0, + .port_width = GPIO_BANKSIZE, + .pint_id = 5, + .pint_assign = false, + .pint_map = 1, +}; + +static struct platform_device bfin_gpg_device = { + .name = ADI_GPIO_DEVNAME, + .id = 6, + .num_resources = ARRAY_SIZE(bfin_gpg_resources), + .resource = bfin_gpg_resources, + .dev = { + .platform_data = &bfin_gpg_pdata, /* Passed to driver */ + }, +}; + +#endif + +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -1252,39 +1690,38 @@ static struct platform_device bfin_device_gpiokeys = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, /* Framework bus number */ - .chip_select = 1, /* SPI_SSEL1*/ + .chip_select = MAX_CTRL_CS + GPIO_PD11, /* SPI_SSEL1*/ .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, .irq = IRQ_PD9, .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 4, + .chip_select = MAX_CTRL_CS + GPIO_PC15, /* SPI_SSEL4 */ }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 1, + .chip_select = MAX_CTRL_CS + GPIO_PD11, /* SPI_SSEL1*/ .controller_data = &spidev_chip_info, }, #endif -#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE) +#if IS_ENABLED(CONFIG_INPUT_ADXL34X_SPI) { .modalias = "adxl34x", .platform_data = &adxl34x_info, @@ -1296,7 +1733,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif }; -#if defined(CONFIG_SPI_BFIN6XX) || defined(CONFIG_SPI_BFIN6XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_ADI_V3) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { { @@ -1337,13 +1774,13 @@ static struct resource bfin_spi1_resource[] = { }; /* SPI controller data */ -static struct bfin6xx_spi_master bf60x_spi_master_info0 = { +static struct adi_spi3_master bf60x_spi_master_info0 = { .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, }; static struct platform_device bf60x_spi_master0 = { - .name = "bfin-spi", + .name = "adi-spi3", .id = 0, /* Bus number */ .num_resources = ARRAY_SIZE(bfin_spi0_resource), .resource = bfin_spi0_resource, @@ -1352,13 +1789,13 @@ static struct platform_device bf60x_spi_master0 = { }, }; -static struct bfin6xx_spi_master bf60x_spi_master_info1 = { +static struct adi_spi3_master bf60x_spi_master_info1 = { .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0}, }; static struct platform_device bf60x_spi_master1 = { - .name = "bfin-spi", + .name = "adi-spi3", .id = 1, /* Bus number */ .num_resources = ARRAY_SIZE(bfin_spi1_resource), .resource = bfin_spi1_resource, @@ -1368,7 +1805,7 @@ static struct platform_device bf60x_spi_master1 = { }; #endif /* spi master and devices */ -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; static struct resource bfin_twi0_resource[] = { @@ -1421,20 +1858,20 @@ static struct platform_device i2c_bfin_twi1_device = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info0[] = { -#if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE) +#if IS_ENABLED(CONFIG_INPUT_ADXL34X_I2C) { I2C_BOARD_INFO("adxl34x", 0x53), .irq = IRQ_PC5, .platform_data = (void *)&adxl34x_info, }, #endif -#if defined(CONFIG_SND_SOC_ADAU1761) || defined(CONFIG_SND_SOC_ADAU1761_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_ADAU1761) { I2C_BOARD_INFO("adau1761", 0x38), .platform_data = (void *)&adau1761_info }, #endif -#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_SSM2602) { I2C_BOARD_INFO("ssm2602", 0x1b), }, @@ -1475,12 +1912,28 @@ static struct platform_device bfin_dpmc = { static struct platform_device *ezkit_devices[] __initdata = { &bfin_dpmc, - -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if defined(CONFIG_PINCTRL_ADI2) + &bfin_pinctrl_device, + &bfin_pint0_device, + &bfin_pint1_device, + &bfin_pint2_device, + &bfin_pint3_device, + &bfin_pint4_device, + &bfin_pint5_device, + &bfin_gpa_device, + &bfin_gpb_device, + &bfin_gpc_device, + &bfin_gpd_device, + &bfin_gpe_device, + &bfin_gpf_device, + &bfin_gpg_device, +#endif + +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -1489,7 +1942,7 @@ static struct platform_device *ezkit_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -1498,19 +1951,19 @@ static struct platform_device *ezkit_devices[] __initdata = { #endif #endif -#if defined(CONFIG_STMMAC_ETH) || defined(CONFIG_STMMAC_ETH_MODULE) +#if IS_ENABLED(CONFIG_STMMAC_ETH) &bfin_eth_device, #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) &musb_device, #endif -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) &bfin_isp1760_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -1522,28 +1975,28 @@ static struct platform_device *ezkit_devices[] __initdata = { #endif #endif -#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) +#if IS_ENABLED(CONFIG_CAN_BFIN) &bfin_can0_device, #endif -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) &bfin_nand_device, #endif -#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SDH_BFIN) &bfin_sdh_device, #endif -#if defined(CONFIG_SPI_BFIN6XX) || defined(CONFIG_SPI_BFIN6XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_ADI_V3) &bf60x_spi_master0, &bf60x_spi_master1, #endif -#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) +#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY) &bfin_rotary_device, #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi0_device, #if !defined(CONFIG_BF542) &i2c_bfin_twi1_device, @@ -1558,53 +2011,79 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_crypto_crc_device, #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &ezkit_flash_device, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) &bfin_i2s_pcm, #endif -#if defined(CONFIG_SND_BF6XX_SOC_I2S) || \ - defined(CONFIG_SND_BF6XX_SOC_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF6XX_SOC_I2S) &bfin_i2s, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \ - defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) &bfin_ad1836_machine, #endif -#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61) || \ - defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61) &adau1761_device, #endif -#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \ - || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE) &bfin_capture_device, #endif -#if defined(CONFIG_VIDEO_BLACKFIN_DISPLAY) \ - || defined(CONFIG_VIDEO_BLACKFIN_DISPLAY_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_DISPLAY) &bfin_display_device, #endif }; +/* Pin control settings */ +static struct pinctrl_map __initdata bfin_pinmux_map[] = { + /* per-device maps */ + PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.0", "pinctrl-adi2.0", NULL, "uart0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.1", "pinctrl-adi2.0", NULL, "uart1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.0", "pinctrl-adi2.0", NULL, "uart0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.1", "pinctrl-adi2.0", NULL, "uart1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-sdh.0", "pinctrl-adi2.0", NULL, "rsi0"), + PIN_MAP_MUX_GROUP_DEFAULT("stmmaceth.0", "pinctrl-adi2.0", NULL, "eth0"), + PIN_MAP_MUX_GROUP_DEFAULT("adi-spi3.0", "pinctrl-adi2.0", NULL, "spi0"), + PIN_MAP_MUX_GROUP_DEFAULT("adi-spi3.1", "pinctrl-adi2.0", NULL, "spi1"), + PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.0", "pinctrl-adi2.0", NULL, "twi0"), + PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.1", "pinctrl-adi2.0", NULL, "twi1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-rotary", "pinctrl-adi2.0", NULL, "rotary"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_can.0", "pinctrl-adi2.0", NULL, "can0"), + PIN_MAP_MUX_GROUP_DEFAULT("physmap-flash.0", "pinctrl-adi2.0", NULL, "smc0"), + PIN_MAP_MUX_GROUP_DEFAULT("bf609_nl8048.2", "pinctrl-adi2.0", "ppi2_16bgrp", "ppi2"), + PIN_MAP_MUX_GROUP("bfin_display.0", "8bit", "pinctrl-adi2.0", "ppi2_8bgrp", "ppi2"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_display.0", "pinctrl-adi2.0", "ppi2_16bgrp", "ppi2"), + PIN_MAP_MUX_GROUP("bfin_display.0", "16bit", "pinctrl-adi2.0", "ppi2_16bgrp", "ppi2"), + PIN_MAP_MUX_GROUP("bfin_capture.0", "8bit", "pinctrl-adi2.0", "ppi0_8bgrp", "ppi0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_capture.0", "pinctrl-adi2.0", "ppi0_16bgrp", "ppi0"), + PIN_MAP_MUX_GROUP("bfin_capture.0", "16bit", "pinctrl-adi2.0", "ppi0_16bgrp", "ppi0"), + PIN_MAP_MUX_GROUP("bfin_capture.0", "24bit", "pinctrl-adi2.0", "ppi0_24bgrp", "ppi0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.0", "pinctrl-adi2.0", NULL, "sport0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.0", "pinctrl-adi2.0", NULL, "sport0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.1", "pinctrl-adi2.0", NULL, "sport1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.1", "pinctrl-adi2.0", NULL, "sport1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.2", "pinctrl-adi2.0", NULL, "sport2"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.2", "pinctrl-adi2.0", NULL, "sport2"), +}; + static int __init ezkit_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); + /* Initialize pinmuxing */ + pinctrl_register_mappings(bfin_pinmux_map, + ARRAY_SIZE(bfin_pinmux_map)); + i2c_register_board_info(0, bfin_i2c_board_info0, ARRAY_SIZE(bfin_i2c_board_info0)); i2c_register_board_info(1, bfin_i2c_board_info1, ARRAY_SIZE(bfin_i2c_board_info1)); -#if defined(CONFIG_STMMAC_ETH) || defined(CONFIG_STMMAC_ETH_MODULE) - if (!peripheral_request_list(pins, "emac0")) - printk(KERN_ERR "%s(): request emac pins failed\n", __func__); -#endif - platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); @@ -1623,18 +2102,6 @@ static struct platform_device *ezkit_early_devices[] __initdata = { &bfin_uart1_device, #endif #endif - -#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) -#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART - &bfin_sport0_uart_device, -#endif -#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART - &bfin_sport1_uart_device, -#endif -#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART - &bfin_sport2_uart_device, -#endif -#endif }; void __init native_machine_early_platform_add_devices(void) diff --git a/arch/blackfin/mach-bf609/clock.c b/arch/blackfin/mach-bf609/clock.c index 437d56c8228..244fa4ab4c5 100644 --- a/arch/blackfin/mach-bf609/clock.c +++ b/arch/blackfin/mach-bf609/clock.c @@ -73,24 +73,6 @@ static void clk_reg_write_mask(u32 reg, uint32_t val, uint32_t mask) bfin_write32(reg, val2); } -static void clk_reg_set_bits(u32 reg, uint32_t mask) -{ - u32 val; - - val = bfin_read32(reg); - val |= mask; - bfin_write32(reg, val); -} - -static void clk_reg_clear_bits(u32 reg, uint32_t mask) -{ - u32 val; - - val = bfin_read32(reg); - val &= ~mask; - bfin_write32(reg, val); -} - int wait_for_pll_align(void) { int i = 10000; @@ -120,6 +102,7 @@ void clk_disable(struct clk *clk) } EXPORT_SYMBOL(clk_disable); + unsigned long clk_get_rate(struct clk *clk) { unsigned long ret = 0; @@ -131,7 +114,7 @@ EXPORT_SYMBOL(clk_get_rate); long clk_round_rate(struct clk *clk, unsigned long rate) { - long ret = -EIO; + long ret = 0; if (clk->ops && clk->ops->round_rate) ret = clk->ops->round_rate(clk, rate); return ret; @@ -220,6 +203,12 @@ unsigned long sys_clk_get_rate(struct clk *clk) } } +unsigned long dummy_get_rate(struct clk *clk) +{ + clk->parent->rate = clk_get_rate(clk->parent); + return clk->parent->rate; +} + unsigned long sys_clk_round_rate(struct clk *clk, unsigned long rate) { unsigned long max_rate; @@ -283,6 +272,10 @@ static struct clk_ops sys_clk_ops = { .round_rate = sys_clk_round_rate, }; +static struct clk_ops dummy_clk_ops = { + .get_rate = dummy_get_rate, +}; + static struct clk sys_clkin = { .name = "SYS_CLKIN", .rate = CONFIG_CLKIN_HZ, @@ -364,6 +357,18 @@ static struct clk oclk = { .parent = &pll_clk, }; +static struct clk ethclk = { + .name = "stmmaceth", + .parent = &sclk0, + .ops = &dummy_clk_ops, +}; + +static struct clk spiclk = { + .name = "spi", + .parent = &sclk1, + .ops = &dummy_clk_ops, +}; + static struct clk_lookup bf609_clks[] = { CLK(sys_clkin, NULL, "SYS_CLKIN"), CLK(pll_clk, NULL, "PLLCLK"), @@ -375,6 +380,8 @@ static struct clk_lookup bf609_clks[] = { CLK(sclk1, NULL, "SCLK1"), CLK(dclk, NULL, "DCLK"), CLK(oclk, NULL, "OCLK"), + CLK(ethclk, NULL, "stmmaceth"), + CLK(spiclk, NULL, "spi"), }; int __init clk_init(void) diff --git a/arch/blackfin/mach-bf609/include/mach/anomaly.h b/arch/blackfin/mach-bf609/include/mach/anomaly.h index 7a07374308a..696786e9a53 100644 --- a/arch/blackfin/mach-bf609/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf609/include/mach/anomaly.h @@ -23,11 +23,11 @@ /* TRU_STAT.ADDRERR and TRU_ERRADDR.ADDR May Not Reflect the Correct Status */ #define ANOMALY_16000003 (1) /* The EPPI Data Enable (DEN) Signal is Not Functional */ -#define ANOMALY_16000004 (1) +#define ANOMALY_16000004 (__SILICON_REVISION__ < 1) /* Using L1 Instruction Cache with Parity Enabled is Unreliable */ -#define ANOMALY_16000005 (1) +#define ANOMALY_16000005 (__SILICON_REVISION__ < 1) /* SEQSTAT.SYSNMI Clears Upon Entering the NMI ISR */ -#define ANOMALY_16000006 (1) +#define ANOMALY_16000006 (__SILICON_REVISION__ < 1) /* DDR2 Memory Reads May Fail Intermittently */ #define ANOMALY_16000007 (1) /* Instruction Memory Stalls Can Cause IFLUSH to Fail */ @@ -49,19 +49,53 @@ /* Speculative Fetches Can Cause Undesired External FIFO Operations */ #define ANOMALY_16000017 (1) /* RSI Boot Cleanup Routine Does Not Clear Registers */ -#define ANOMALY_16000018 (1) +#define ANOMALY_16000018 (__SILICON_REVISION__ < 1) /* SPI Master Boot Device Auto-detection Frequency is Set Incorrectly */ -#define ANOMALY_16000019 (1) +#define ANOMALY_16000019 (__SILICON_REVISION__ < 1) /* rom_SysControl() Fails to Set DDR0_CTL.INIT for Wakeup From Hibernate */ -#define ANOMALY_16000020 (1) +#define ANOMALY_16000020 (__SILICON_REVISION__ < 1) /* rom_SysControl() Fails to Save and Restore DDR0_PHYCTL3 for Hibernate/Wakeup Sequence */ -#define ANOMALY_16000021 (1) +#define ANOMALY_16000021 (__SILICON_REVISION__ < 1) /* Boot Code Fails to Enable Parity Fault Detection */ -#define ANOMALY_16000022 (1) +#define ANOMALY_16000022 (__SILICON_REVISION__ < 1) +/* Rom_SysControl Does not Update CGU0_CLKOUTSEL */ +#define ANOMALY_16000023 (__SILICON_REVISION__ < 1) +/* Spurious Fault Signaled After Clearing an Externally Generated Fault */ +#define ANOMALY_16000024 (1) +/* SPORT May Drive Data Pins During Inactive Channels in Multichannel Mode */ +#define ANOMALY_16000025 (1) /* USB DMA interrupt status do not show the DMA channel interrupt in the DMA ISR */ -#define ANOMALY_16000027 (1) +#define ANOMALY_16000027 (__SILICON_REVISION__ < 1) +/* Default SPI Master Boot Mode Setting is Incorrect */ +#define ANOMALY_16000028 (__SILICON_REVISION__ < 1) +/* PPI tDFSPI Timing Does Not Meet Data Sheet Specification */ +#define ANOMALY_16000027 (__SILICON_REVISION__ < 1) /* Interrupted Core Reads of MMRs May Cause Data Loss */ -#define ANOMALY_16000030 (1) +#define ANOMALY_16000030 (__SILICON_REVISION__ < 1) +/* Incorrect Default USB_PLL_OSC.PLLM Value */ +#define ANOMALY_16000031 (__SILICON_REVISION__ < 1) +/* Core Reads of System MMRs May Cause the Core to Hang */ +#define ANOMALY_16000032 (__SILICON_REVISION__ < 1) +/* PPI Data Underflow on First Word Not Reported in Certain Modes */ +#define ANOMALY_16000033 (1) +/* CNV1 Red Pixel Substitution feature not functional in the PVP */ +#define ANOMALY_16000034 (__SILICON_REVISION__ < 1) +/* IPF0 Output Port Color Separation feature not functional */ +#define ANOMALY_16000035 (__SILICON_REVISION__ < 1) +/* Spurious USB Wake From Hibernate May Occur When USB_VBUS is Low */ +#define ANOMALY_16000036 (__SILICON_REVISION__ < 1) +/* Core RAISE 2 Instruction Not Latched When Executed at Priority Level 0, 1, or 2 */ +#define ANOMALY_16000037 (__SILICON_REVISION__ < 1) +/* Spurious Unhandled NMI or L1 Memory Parity Error Interrupt May Occur Upon Entering the NMI ISR */ +#define ANOMALY_16000038 (__SILICON_REVISION__ < 1) +/* CGU_STAT.PLOCKERR Bit May be Unreliable */ +#define ANOMALY_16000039 (1) +/* JTAG Emulator Reads of SDU_IDCODE Alter Register Contents */ +#define ANOMALY_16000040 (1) +/* IFLUSH Instruction Causes Parity Error When Parity Is Enabled */ +#define ANOMALY_16000041 (1) +/* Instruction Cache Failure When Parity Is Enabled */ +#define ANOMALY_16000042 (__SILICON_REVISION__ == 1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000158 (0) diff --git a/arch/blackfin/mach-bf609/include/mach/cdefBF60x_base.h b/arch/blackfin/mach-bf609/include/mach/cdefBF60x_base.h index 4954cf3f7e1..102ee4025ac 100644 --- a/arch/blackfin/mach-bf609/include/mach/cdefBF60x_base.h +++ b/arch/blackfin/mach-bf609/include/mach/cdefBF60x_base.h @@ -312,6 +312,8 @@ #define bfin_write_DMC0_EMR1(val) bfin_write32(DMC0_EMR1, val) #define bfin_read_DMC0_CTL() bfin_read32(DMC0_CTL) #define bfin_write_DMC0_CTL(val) bfin_write32(DMC0_CTL, val) +#define bfin_read_DMC0_EFFCTL() bfin_read32(DMC0_EFFCTL) +#define bfin_write_DMC0_EFFCTL(val) bfin_write32(DMC0_EFFCTL, val) #define bfin_read_DMC0_STAT() bfin_read32(DMC0_STAT) #define bfin_write_DMC0_STAT(val) bfin_write32(DMC0_STAT, val) #define bfin_read_DMC0_DLLCTL() bfin_read32(DMC0_DLLCTL) diff --git a/arch/blackfin/mach-bf609/include/mach/defBF60x_base.h b/arch/blackfin/mach-bf609/include/mach/defBF60x_base.h index f1a6afae1a7..35caa7bc192 100644 --- a/arch/blackfin/mach-bf609/include/mach/defBF60x_base.h +++ b/arch/blackfin/mach-bf609/include/mach/defBF60x_base.h @@ -839,6 +839,16 @@ #define PORTG_LOCK 0xFFC03344 /* PORTG Port x GPIO Lock Register */ #define PORTG_REVID 0xFFC0337C /* PORTG Port x GPIO Revision ID */ +/* ================================================== + Pads Controller Registers + ================================================== */ + +/* ========================= + PADS0 + ========================= */ +#define PADS0_EMAC_PTP_CLKSEL 0xFFC03404 /* PADS0 Clock Selection for EMAC and PTP */ +#define PADS0_TWI_VSEL 0xFFC03408 /* PADS0 TWI Voltage Selection */ +#define PADS0_PORTS_HYST 0xFFC03440 /* PADS0 Hysteresis Enable Register */ /* ========================= PINT Registers diff --git a/arch/blackfin/mach-bf609/include/mach/gpio.h b/arch/blackfin/mach-bf609/include/mach/gpio.h index c32c8cc8db2..07182513e79 100644 --- a/arch/blackfin/mach-bf609/include/mach/gpio.h +++ b/arch/blackfin/mach-bf609/include/mach/gpio.h @@ -152,14 +152,6 @@ struct gpio_port_t { unsigned long revid; }; -struct gpio_port_s { - unsigned short fer; - unsigned short data; - unsigned short dir; - unsigned short inen; - unsigned int mux; -}; - #endif #include <mach-common/ports-a.h> diff --git a/arch/blackfin/mach-bf609/include/mach/irq.h b/arch/blackfin/mach-bf609/include/mach/irq.h index 23e74cdeeee..d1cb6a86f80 100644 --- a/arch/blackfin/mach-bf609/include/mach/irq.h +++ b/arch/blackfin/mach-bf609/include/mach/irq.h @@ -9,9 +9,6 @@ #include <mach-common/irq.h> -#undef BFIN_IRQ -#define BFIN_IRQ(x) ((x) + IVG15) - #define NR_PERI_INTS (5 * 32) #define IRQ_SEC_ERR BFIN_IRQ(0) /* SEC Error */ @@ -301,7 +298,7 @@ extern u8 sec_int_priority[]; /* - * bfin pint registers layout + * gpio pint registers layout */ struct bfin_pint_regs { u32 mask_set; diff --git a/arch/blackfin/mach-bf609/include/mach/pm.h b/arch/blackfin/mach-bf609/include/mach/pm.h index 3ca0fb96563..a1efd936dd3 100644 --- a/arch/blackfin/mach-bf609/include/mach/pm.h +++ b/arch/blackfin/mach-bf609/include/mach/pm.h @@ -10,6 +10,7 @@ #define __MACH_BF609_PM_H__ #include <linux/suspend.h> +#include <linux/platform_device.h> extern int bfin609_pm_enter(suspend_state_t state); extern int bf609_pm_prepare(void); @@ -19,6 +20,6 @@ void bf609_hibernate(void); void bfin_sec_raise_irq(unsigned int sid); void coreb_enable(void); -int bf609_nor_flash_init(void); -void bf609_nor_flash_exit(void); +int bf609_nor_flash_init(struct platform_device *pdev); +void bf609_nor_flash_exit(struct platform_device *pdev); #endif diff --git a/arch/blackfin/mach-bf609/include/mach/portmux.h b/arch/blackfin/mach-bf609/include/mach/portmux.h index 2e1a51c2509..c48bb71a55c 100644 --- a/arch/blackfin/mach-bf609/include/mach/portmux.h +++ b/arch/blackfin/mach-bf609/include/mach/portmux.h @@ -7,8 +7,6 @@ #ifndef _MACH_PORTMUX_H_ #define _MACH_PORTMUX_H_ -#define MAX_RESOURCES MAX_BLACKFIN_GPIOS - /* EMAC RMII Port Mux */ #define P_MII0_MDC (P_DEFINED | P_IDENT(GPIO_PC6) | P_FUNCT(0)) #define P_MII0_MDIO (P_DEFINED | P_IDENT(GPIO_PC7) | P_FUNCT(0)) @@ -21,6 +19,7 @@ #define P_MII0_CRS (P_DEFINED | P_IDENT(GPIO_PC5) | P_FUNCT(0)) #define P_MII0_ERxER (P_DEFINED | P_IDENT(GPIO_PC4) | P_FUNCT(0)) #define P_MII0_TxCLK (P_DEFINED | P_IDENT(GPIO_PB14) | P_FUNCT(0)) +#define P_MII0_PTPPPS (P_DEFINED | P_IDENT(GPIO_PB15) | P_FUNCT(0)) #define P_RMII0 {\ P_MII0_ETxD0, \ @@ -32,6 +31,7 @@ P_MII0_TxCLK, \ P_MII0_PHYINT, \ P_MII0_CRS, \ + P_MII0_PTPPPS, \ P_MII0_MDC, \ P_MII0_MDIO, 0} @@ -46,6 +46,7 @@ #define P_MII1_CRS (P_DEFINED | P_IDENT(GPIO_PE13) | P_FUNCT(0)) #define P_MII1_ERxER (P_DEFINED | P_IDENT(GPIO_PE14) | P_FUNCT(0)) #define P_MII1_TxCLK (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(0)) +#define P_MII1_PTPPPS (P_DEFINED | P_IDENT(GPIO_PC9) | P_FUNCT(0)) #define P_RMII1 {\ P_MII1_ETxD0, \ @@ -57,6 +58,7 @@ P_MII1_TxCLK, \ P_MII1_PHYINT, \ P_MII1_CRS, \ + P_MII1_PTPPPS, \ P_MII1_MDC, \ P_MII1_MDIO, 0} diff --git a/arch/blackfin/mach-bf609/pm.c b/arch/blackfin/mach-bf609/pm.c index dacafc163f7..b1bfcf434d1 100644 --- a/arch/blackfin/mach-bf609/pm.c +++ b/arch/blackfin/mach-bf609/pm.c @@ -174,7 +174,6 @@ void bfin_hibernate_syscontrol(void) bfin_write32(DPM0_RESTORE5, bfin_read32(DPM0_RESTORE5) | 4); } -#define IRQ_SID(irq) ((irq) - IVG15) asmlinkage void enter_deepsleep(void); __attribute__((l1_text)) @@ -211,7 +210,7 @@ void bf609_cpu_pm_enter(suspend_state_t state) #ifdef CONFIG_PM_BFIN_WAKE_PB15 wakeup |= PB15WE; -# if CONFIG_PM_BFIN_WAKE_PA15_POL +# if CONFIG_PM_BFIN_WAKE_PB15_POL wakeup_pol |= PB15WE; # endif #endif @@ -292,13 +291,13 @@ static struct bfin_cpu_pm_fns bf609_cpu_pm = { #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) static int smc_pm_syscore_suspend(void) { - bf609_nor_flash_exit(); + bf609_nor_flash_exit(NULL); return 0; } static void smc_pm_syscore_resume(void) { - bf609_nor_flash_init(); + bf609_nor_flash_init(NULL); } static struct syscore_ops smc_pm_syscore_ops = { @@ -311,7 +310,7 @@ static irqreturn_t test_isr(int irq, void *dev_id) { printk(KERN_DEBUG "gpio irq %d\n", irq); if (irq == 231) - bfin_sec_raise_irq(IRQ_SID(IRQ_SOFT1)); + bfin_sec_raise_irq(BFIN_SYSIRQ(IRQ_SOFT1)); return IRQ_HANDLED; } diff --git a/arch/blackfin/mach-bf609/scb.c b/arch/blackfin/mach-bf609/scb.c new file mode 100644 index 00000000000..ac1f07c3359 --- /dev/null +++ b/arch/blackfin/mach-bf609/scb.c @@ -0,0 +1,363 @@ +/* + * arch/blackfin/mach-common/scb-init.c - reprogram system cross bar priority + * + * Copyright 2012 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <asm/blackfin.h> +#include <asm/scb.h> + +struct scb_mi_prio scb_data[] = { +#ifdef CONFIG_SCB0_MI0 + { REG_SCB0_ARBR0, REG_SCB0_ARBW0, 32, { + CONFIG_SCB0_MI0_SLOT0, + CONFIG_SCB0_MI0_SLOT1, + CONFIG_SCB0_MI0_SLOT2, + CONFIG_SCB0_MI0_SLOT3, + CONFIG_SCB0_MI0_SLOT4, + CONFIG_SCB0_MI0_SLOT5, + CONFIG_SCB0_MI0_SLOT6, + CONFIG_SCB0_MI0_SLOT7, + CONFIG_SCB0_MI0_SLOT8, + CONFIG_SCB0_MI0_SLOT9, + CONFIG_SCB0_MI0_SLOT10, + CONFIG_SCB0_MI0_SLOT11, + CONFIG_SCB0_MI0_SLOT12, + CONFIG_SCB0_MI0_SLOT13, + CONFIG_SCB0_MI0_SLOT14, + CONFIG_SCB0_MI0_SLOT15, + CONFIG_SCB0_MI0_SLOT16, + CONFIG_SCB0_MI0_SLOT17, + CONFIG_SCB0_MI0_SLOT18, + CONFIG_SCB0_MI0_SLOT19, + CONFIG_SCB0_MI0_SLOT20, + CONFIG_SCB0_MI0_SLOT21, + CONFIG_SCB0_MI0_SLOT22, + CONFIG_SCB0_MI0_SLOT23, + CONFIG_SCB0_MI0_SLOT24, + CONFIG_SCB0_MI0_SLOT25, + CONFIG_SCB0_MI0_SLOT26, + CONFIG_SCB0_MI0_SLOT27, + CONFIG_SCB0_MI0_SLOT28, + CONFIG_SCB0_MI0_SLOT29, + CONFIG_SCB0_MI0_SLOT30, + CONFIG_SCB0_MI0_SLOT31 + }, + }, +#endif +#ifdef CONFIG_SCB0_MI1 + { REG_SCB0_ARBR1, REG_SCB0_ARBW1, 32, { + CONFIG_SCB0_MI1_SLOT0, + CONFIG_SCB0_MI1_SLOT1, + CONFIG_SCB0_MI1_SLOT2, + CONFIG_SCB0_MI1_SLOT3, + CONFIG_SCB0_MI1_SLOT4, + CONFIG_SCB0_MI1_SLOT5, + CONFIG_SCB0_MI1_SLOT6, + CONFIG_SCB0_MI1_SLOT7, + CONFIG_SCB0_MI1_SLOT8, + CONFIG_SCB0_MI1_SLOT9, + CONFIG_SCB0_MI1_SLOT10, + CONFIG_SCB0_MI1_SLOT11, + CONFIG_SCB0_MI1_SLOT12, + CONFIG_SCB0_MI1_SLOT13, + CONFIG_SCB0_MI1_SLOT14, + CONFIG_SCB0_MI1_SLOT15, + CONFIG_SCB0_MI1_SLOT16, + CONFIG_SCB0_MI1_SLOT17, + CONFIG_SCB0_MI1_SLOT18, + CONFIG_SCB0_MI1_SLOT19, + CONFIG_SCB0_MI1_SLOT20, + CONFIG_SCB0_MI1_SLOT21, + CONFIG_SCB0_MI1_SLOT22, + CONFIG_SCB0_MI1_SLOT23, + CONFIG_SCB0_MI1_SLOT24, + CONFIG_SCB0_MI1_SLOT25, + CONFIG_SCB0_MI1_SLOT26, + CONFIG_SCB0_MI1_SLOT27, + CONFIG_SCB0_MI1_SLOT28, + CONFIG_SCB0_MI1_SLOT29, + CONFIG_SCB0_MI1_SLOT30, + CONFIG_SCB0_MI1_SLOT31 + }, + }, +#endif +#ifdef CONFIG_SCB0_MI2 + { REG_SCB0_ARBR2, REG_SCB0_ARBW2, 32, { + CONFIG_SCB0_MI2_SLOT0, + CONFIG_SCB0_MI2_SLOT1, + CONFIG_SCB0_MI2_SLOT2, + CONFIG_SCB0_MI2_SLOT3, + CONFIG_SCB0_MI2_SLOT4, + CONFIG_SCB0_MI2_SLOT5, + CONFIG_SCB0_MI2_SLOT6, + CONFIG_SCB0_MI2_SLOT7, + CONFIG_SCB0_MI2_SLOT8, + CONFIG_SCB0_MI2_SLOT9, + CONFIG_SCB0_MI2_SLOT10, + CONFIG_SCB0_MI2_SLOT11, + CONFIG_SCB0_MI2_SLOT12, + CONFIG_SCB0_MI2_SLOT13, + CONFIG_SCB0_MI2_SLOT14, + CONFIG_SCB0_MI2_SLOT15, + CONFIG_SCB0_MI2_SLOT16, + CONFIG_SCB0_MI2_SLOT17, + CONFIG_SCB0_MI2_SLOT18, + CONFIG_SCB0_MI2_SLOT19, + CONFIG_SCB0_MI2_SLOT20, + CONFIG_SCB0_MI2_SLOT21, + CONFIG_SCB0_MI2_SLOT22, + CONFIG_SCB0_MI2_SLOT23, + CONFIG_SCB0_MI2_SLOT24, + CONFIG_SCB0_MI2_SLOT25, + CONFIG_SCB0_MI2_SLOT26, + CONFIG_SCB0_MI2_SLOT27, + CONFIG_SCB0_MI2_SLOT28, + CONFIG_SCB0_MI2_SLOT29, + CONFIG_SCB0_MI2_SLOT30, + CONFIG_SCB0_MI2_SLOT31 + }, + }, +#endif +#ifdef CONFIG_SCB0_MI3 + { REG_SCB0_ARBR3, REG_SCB0_ARBW3, 32, { + CONFIG_SCB0_MI3_SLOT0, + CONFIG_SCB0_MI3_SLOT1, + CONFIG_SCB0_MI3_SLOT2, + CONFIG_SCB0_MI3_SLOT3, + CONFIG_SCB0_MI3_SLOT4, + CONFIG_SCB0_MI3_SLOT5, + CONFIG_SCB0_MI3_SLOT6, + CONFIG_SCB0_MI3_SLOT7, + CONFIG_SCB0_MI3_SLOT8, + CONFIG_SCB0_MI3_SLOT9, + CONFIG_SCB0_MI3_SLOT10, + CONFIG_SCB0_MI3_SLOT11, + CONFIG_SCB0_MI3_SLOT12, + CONFIG_SCB0_MI3_SLOT13, + CONFIG_SCB0_MI3_SLOT14, + CONFIG_SCB0_MI3_SLOT15, + CONFIG_SCB0_MI3_SLOT16, + CONFIG_SCB0_MI3_SLOT17, + CONFIG_SCB0_MI3_SLOT18, + CONFIG_SCB0_MI3_SLOT19, + CONFIG_SCB0_MI3_SLOT20, + CONFIG_SCB0_MI3_SLOT21, + CONFIG_SCB0_MI3_SLOT22, + CONFIG_SCB0_MI3_SLOT23, + CONFIG_SCB0_MI3_SLOT24, + CONFIG_SCB0_MI3_SLOT25, + CONFIG_SCB0_MI3_SLOT26, + CONFIG_SCB0_MI3_SLOT27, + CONFIG_SCB0_MI3_SLOT28, + CONFIG_SCB0_MI3_SLOT29, + CONFIG_SCB0_MI3_SLOT30, + CONFIG_SCB0_MI3_SLOT31 + }, + }, +#endif +#ifdef CONFIG_SCB0_MI4 + { REG_SCB0_ARBR4, REG_SCB4_ARBW0, 32, { + CONFIG_SCB0_MI4_SLOT0, + CONFIG_SCB0_MI4_SLOT1, + CONFIG_SCB0_MI4_SLOT2, + CONFIG_SCB0_MI4_SLOT3, + CONFIG_SCB0_MI4_SLOT4, + CONFIG_SCB0_MI4_SLOT5, + CONFIG_SCB0_MI4_SLOT6, + CONFIG_SCB0_MI4_SLOT7, + CONFIG_SCB0_MI4_SLOT8, + CONFIG_SCB0_MI4_SLOT9, + CONFIG_SCB0_MI4_SLOT10, + CONFIG_SCB0_MI4_SLOT11, + CONFIG_SCB0_MI4_SLOT12, + CONFIG_SCB0_MI4_SLOT13, + CONFIG_SCB0_MI4_SLOT14, + CONFIG_SCB0_MI4_SLOT15, + CONFIG_SCB0_MI4_SLOT16, + CONFIG_SCB0_MI4_SLOT17, + CONFIG_SCB0_MI4_SLOT18, + CONFIG_SCB0_MI4_SLOT19, + CONFIG_SCB0_MI4_SLOT20, + CONFIG_SCB0_MI4_SLOT21, + CONFIG_SCB0_MI4_SLOT22, + CONFIG_SCB0_MI4_SLOT23, + CONFIG_SCB0_MI4_SLOT24, + CONFIG_SCB0_MI4_SLOT25, + CONFIG_SCB0_MI4_SLOT26, + CONFIG_SCB0_MI4_SLOT27, + CONFIG_SCB0_MI4_SLOT28, + CONFIG_SCB0_MI4_SLOT29, + CONFIG_SCB0_MI4_SLOT30, + CONFIG_SCB0_MI4_SLOT31 + }, + }, +#endif +#ifdef CONFIG_SCB0_MI5 + { REG_SCB0_ARBR5, REG_SCB0_ARBW5, 16, { + CONFIG_SCB0_MI5_SLOT0, + CONFIG_SCB0_MI5_SLOT1, + CONFIG_SCB0_MI5_SLOT2, + CONFIG_SCB0_MI5_SLOT3, + CONFIG_SCB0_MI5_SLOT4, + CONFIG_SCB0_MI5_SLOT5, + CONFIG_SCB0_MI5_SLOT6, + CONFIG_SCB0_MI5_SLOT7, + CONFIG_SCB0_MI5_SLOT8, + CONFIG_SCB0_MI5_SLOT9, + CONFIG_SCB0_MI5_SLOT10, + CONFIG_SCB0_MI5_SLOT11, + CONFIG_SCB0_MI5_SLOT12, + CONFIG_SCB0_MI5_SLOT13, + CONFIG_SCB0_MI5_SLOT14, + CONFIG_SCB0_MI5_SLOT15 + }, + }, +#endif +#ifdef CONFIG_SCB1_MI0 + { REG_SCB1_ARBR0, REG_SCB1_ARBW0, 20, { + CONFIG_SCB1_MI0_SLOT0, + CONFIG_SCB1_MI0_SLOT1, + CONFIG_SCB1_MI0_SLOT2, + CONFIG_SCB1_MI0_SLOT3, + CONFIG_SCB1_MI0_SLOT4, + CONFIG_SCB1_MI0_SLOT5, + CONFIG_SCB1_MI0_SLOT6, + CONFIG_SCB1_MI0_SLOT7, + CONFIG_SCB1_MI0_SLOT8, + CONFIG_SCB1_MI0_SLOT9, + CONFIG_SCB1_MI0_SLOT10, + CONFIG_SCB1_MI0_SLOT11, + CONFIG_SCB1_MI0_SLOT12, + CONFIG_SCB1_MI0_SLOT13, + CONFIG_SCB1_MI0_SLOT14, + CONFIG_SCB1_MI0_SLOT15, + CONFIG_SCB1_MI0_SLOT16, + CONFIG_SCB1_MI0_SLOT17, + CONFIG_SCB1_MI0_SLOT18, + CONFIG_SCB1_MI0_SLOT19 + }, + }, +#endif +#ifdef CONFIG_SCB2_MI0 + { REG_SCB2_ARBR0, REG_SCB2_ARBW0, 10, { + CONFIG_SCB2_MI0_SLOT0, + CONFIG_SCB2_MI0_SLOT1, + CONFIG_SCB2_MI0_SLOT2, + CONFIG_SCB2_MI0_SLOT3, + CONFIG_SCB2_MI0_SLOT4, + CONFIG_SCB2_MI0_SLOT5, + CONFIG_SCB2_MI0_SLOT6, + CONFIG_SCB2_MI0_SLOT7, + CONFIG_SCB2_MI0_SLOT8, + CONFIG_SCB2_MI0_SLOT9 + }, + }, +#endif +#ifdef CONFIG_SCB3_MI0 + { REG_SCB3_ARBR0, REG_SCB3_ARBW0, 16, { + CONFIG_SCB3_MI0_SLOT0, + CONFIG_SCB3_MI0_SLOT1, + CONFIG_SCB3_MI0_SLOT2, + CONFIG_SCB3_MI0_SLOT3, + CONFIG_SCB3_MI0_SLOT4, + CONFIG_SCB3_MI0_SLOT5, + CONFIG_SCB3_MI0_SLOT6, + CONFIG_SCB3_MI0_SLOT7, + CONFIG_SCB3_MI0_SLOT8, + CONFIG_SCB3_MI0_SLOT9, + CONFIG_SCB3_MI0_SLOT10, + CONFIG_SCB3_MI0_SLOT11, + CONFIG_SCB3_MI0_SLOT12, + CONFIG_SCB3_MI0_SLOT13, + CONFIG_SCB3_MI0_SLOT14, + CONFIG_SCB3_MI0_SLOT15 + }, + }, +#endif +#ifdef CONFIG_SCB4_MI0 + { REG_SCB4_ARBR0, REG_SCB4_ARBW0, 16, { + CONFIG_SCB4_MI0_SLOT0, + CONFIG_SCB4_MI0_SLOT1, + CONFIG_SCB4_MI0_SLOT2, + CONFIG_SCB4_MI0_SLOT3, + CONFIG_SCB4_MI0_SLOT4, + CONFIG_SCB4_MI0_SLOT5, + CONFIG_SCB4_MI0_SLOT6, + CONFIG_SCB4_MI0_SLOT7, + CONFIG_SCB4_MI0_SLOT8, + CONFIG_SCB4_MI0_SLOT9, + CONFIG_SCB4_MI0_SLOT10, + CONFIG_SCB4_MI0_SLOT11, + CONFIG_SCB4_MI0_SLOT12, + CONFIG_SCB4_MI0_SLOT13, + CONFIG_SCB4_MI0_SLOT14, + CONFIG_SCB4_MI0_SLOT15 + }, + }, +#endif +#ifdef CONFIG_SCB5_MI0 + { REG_SCB5_ARBR0, REG_SCB5_ARBW0, 8, { + CONFIG_SCB5_MI0_SLOT0, + CONFIG_SCB5_MI0_SLOT1, + CONFIG_SCB5_MI0_SLOT2, + CONFIG_SCB5_MI0_SLOT3, + CONFIG_SCB5_MI0_SLOT4, + CONFIG_SCB5_MI0_SLOT5, + CONFIG_SCB5_MI0_SLOT6, + CONFIG_SCB5_MI0_SLOT7 + }, + }, +#endif +#ifdef CONFIG_SCB6_MI0 + { REG_SCB6_ARBR0, REG_SCB6_ARBW0, 4, { + CONFIG_SCB6_MI0_SLOT0, + CONFIG_SCB6_MI0_SLOT1, + CONFIG_SCB6_MI0_SLOT2, + CONFIG_SCB6_MI0_SLOT3 + }, + }, +#endif +#ifdef CONFIG_SCB7_MI0 + { REG_SCB7_ARBR0, REG_SCB7_ARBW0, 6, { + CONFIG_SCB7_MI0_SLOT0, + CONFIG_SCB7_MI0_SLOT1, + CONFIG_SCB7_MI0_SLOT2, + CONFIG_SCB7_MI0_SLOT3, + CONFIG_SCB7_MI0_SLOT4, + CONFIG_SCB7_MI0_SLOT5 + }, + }, +#endif +#ifdef CONFIG_SCB8_MI0 + { REG_SCB8_ARBR0, REG_SCB8_ARBW0, 8, { + CONFIG_SCB8_MI0_SLOT0, + CONFIG_SCB8_MI0_SLOT1, + CONFIG_SCB8_MI0_SLOT2, + CONFIG_SCB8_MI0_SLOT3, + CONFIG_SCB8_MI0_SLOT4, + CONFIG_SCB8_MI0_SLOT5, + CONFIG_SCB8_MI0_SLOT6, + CONFIG_SCB8_MI0_SLOT7 + }, + }, +#endif +#ifdef CONFIG_SCB9_MI0 + { REG_SCB9_ARBR0, REG_SCB9_ARBW0, 10, { + CONFIG_SCB9_MI0_SLOT0, + CONFIG_SCB9_MI0_SLOT1, + CONFIG_SCB9_MI0_SLOT2, + CONFIG_SCB9_MI0_SLOT3, + CONFIG_SCB9_MI0_SLOT4, + CONFIG_SCB9_MI0_SLOT5, + CONFIG_SCB9_MI0_SLOT6, + CONFIG_SCB9_MI0_SLOT7, + CONFIG_SCB9_MI0_SLOT8, + CONFIG_SCB9_MI0_SLOT9 + }, + }, +#endif + { 0, } +}; diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile index 75f0ba29ebb..f0997920404 100644 --- a/arch/blackfin/mach-common/Makefile +++ b/arch/blackfin/mach-common/Makefile @@ -10,7 +10,7 @@ obj-$(CONFIG_PM) += pm.o ifneq ($(CONFIG_BF60x),y) obj-$(CONFIG_PM) += dpmc_modes.o endif -obj-$(CONFIG_CPU_FREQ) += cpufreq.o +obj-$(CONFIG_SCB_PRIORITY) += scb-init.o obj-$(CONFIG_CPU_VOLTAGE) += dpmc.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_BFIN_KERNEL_CLOCK) += clocks-init.o diff --git a/arch/blackfin/mach-common/cache-c.c b/arch/blackfin/mach-common/cache-c.c index a60a24f5035..f4adedc9289 100644 --- a/arch/blackfin/mach-common/cache-c.c +++ b/arch/blackfin/mach-common/cache-c.c @@ -6,7 +6,6 @@ * Licensed under the GPL-2 or later. */ -#include <linux/init.h> #include <asm/blackfin.h> #include <asm/cplbinit.h> @@ -42,6 +41,16 @@ bfin_cache_init(struct cplb_entry *cplb_tbl, unsigned long cplb_addr, unsigned long mem_mask) { int i; +#ifdef CONFIG_L1_PARITY_CHECK + u32 ctrl; + + if (cplb_addr == DCPLB_ADDR0) { + ctrl = bfin_read32(mem_control) | (1 << RDCHK); + CSYNC(); + bfin_write32(mem_control, ctrl); + SSYNC(); + } +#endif for (i = 0; i < MAX_CPLBS; i++) { bfin_write32(cplb_addr + i * 4, cplb_tbl[i].addr); @@ -52,7 +61,7 @@ bfin_cache_init(struct cplb_entry *cplb_tbl, unsigned long cplb_addr, } #ifdef CONFIG_BFIN_ICACHE -void __cpuinit bfin_icache_init(struct cplb_entry *icplb_tbl) +void bfin_icache_init(struct cplb_entry *icplb_tbl) { bfin_cache_init(icplb_tbl, ICPLB_ADDR0, ICPLB_DATA0, IMEM_CONTROL, (IMC | ENICPLB)); @@ -60,7 +69,7 @@ void __cpuinit bfin_icache_init(struct cplb_entry *icplb_tbl) #endif #ifdef CONFIG_BFIN_DCACHE -void __cpuinit bfin_dcache_init(struct cplb_entry *dcplb_tbl) +void bfin_dcache_init(struct cplb_entry *dcplb_tbl) { /* * Anomaly notes: diff --git a/arch/blackfin/mach-common/clocks-init.c b/arch/blackfin/mach-common/clocks-init.c index 2308ce52f84..d436bd907fc 100644 --- a/arch/blackfin/mach-common/clocks-init.c +++ b/arch/blackfin/mach-common/clocks-init.c @@ -7,7 +7,6 @@ */ #include <linux/linkage.h> -#include <linux/init.h> #include <asm/blackfin.h> #include <asm/dma.h> diff --git a/arch/blackfin/mach-common/cpufreq.c b/arch/blackfin/mach-common/cpufreq.c deleted file mode 100644 index d88bd31319e..00000000000 --- a/arch/blackfin/mach-common/cpufreq.c +++ /dev/null @@ -1,258 +0,0 @@ -/* - * Blackfin core clock scaling - * - * Copyright 2008-2011 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/cpufreq.h> -#include <linux/fs.h> -#include <linux/delay.h> -#include <asm/blackfin.h> -#include <asm/time.h> -#include <asm/dpmc.h> - - -/* this is the table of CCLK frequencies, in Hz */ -/* .index is the entry in the auxiliary dpm_state_table[] */ -static struct cpufreq_frequency_table bfin_freq_table[] = { - { - .frequency = CPUFREQ_TABLE_END, - .index = 0, - }, - { - .frequency = CPUFREQ_TABLE_END, - .index = 1, - }, - { - .frequency = CPUFREQ_TABLE_END, - .index = 2, - }, - { - .frequency = CPUFREQ_TABLE_END, - .index = 0, - }, -}; - -static struct bfin_dpm_state { - unsigned int csel; /* system clock divider */ - unsigned int tscale; /* change the divider on the core timer interrupt */ -} dpm_state_table[3]; - -#if defined(CONFIG_CYCLES_CLOCKSOURCE) -/* - * normalized to maximum frequency offset for CYCLES, - * used in time-ts cycles clock source, but could be used - * somewhere also. - */ -unsigned long long __bfin_cycles_off; -unsigned int __bfin_cycles_mod; -#endif - -/**************************************************************************/ -static void __init bfin_init_tables(unsigned long cclk, unsigned long sclk) -{ - - unsigned long csel, min_cclk; - int index; - - /* Anomaly 273 seems to still exist on non-BF54x w/dcache turned on */ -#if ANOMALY_05000273 || ANOMALY_05000274 || \ - (!(defined(CONFIG_BF54x) || defined(CONFIG_BF60x)) \ - && defined(CONFIG_BFIN_EXTMEM_DCACHEABLE)) - min_cclk = sclk * 2; -#else - min_cclk = sclk; -#endif - -#ifndef CONFIG_BF60x - csel = ((bfin_read_PLL_DIV() & CSEL) >> 4); -#else - csel = bfin_read32(CGU0_DIV) & 0x1F; -#endif - - for (index = 0; (cclk >> index) >= min_cclk && csel <= 3 && index < 3; index++, csel++) { - bfin_freq_table[index].frequency = cclk >> index; -#ifndef CONFIG_BF60x - dpm_state_table[index].csel = csel << 4; /* Shift now into PLL_DIV bitpos */ -#else - dpm_state_table[index].csel = csel; -#endif - dpm_state_table[index].tscale = (TIME_SCALE >> index) - 1; - - pr_debug("cpufreq: freq:%d csel:0x%x tscale:%d\n", - bfin_freq_table[index].frequency, - dpm_state_table[index].csel, - dpm_state_table[index].tscale); - } - return; -} - -static void bfin_adjust_core_timer(void *info) -{ - unsigned int tscale; - unsigned int index = *(unsigned int *)info; - - /* we have to adjust the core timer, because it is using cclk */ - tscale = dpm_state_table[index].tscale; - bfin_write_TSCALE(tscale); - return; -} - -static unsigned int bfin_getfreq_khz(unsigned int cpu) -{ - /* Both CoreA/B have the same core clock */ - return get_cclk() / 1000; -} - -#ifdef CONFIG_BF60x -unsigned long cpu_set_cclk(int cpu, unsigned long new) -{ - struct clk *clk; - int ret; - - clk = clk_get(NULL, "CCLK"); - if (IS_ERR(clk)) - return -ENODEV; - - ret = clk_set_rate(clk, new); - clk_put(clk); - return ret; -} -#endif - -static int bfin_target(struct cpufreq_policy *poli, - unsigned int target_freq, unsigned int relation) -{ -#ifndef CONFIG_BF60x - unsigned int plldiv; -#endif - unsigned int index, cpu; - unsigned long cclk_hz; - struct cpufreq_freqs freqs; - static unsigned long lpj_ref; - static unsigned int lpj_ref_freq; - int ret = 0; - -#if defined(CONFIG_CYCLES_CLOCKSOURCE) - cycles_t cycles; -#endif - - for_each_online_cpu(cpu) { - struct cpufreq_policy *policy = cpufreq_cpu_get(cpu); - - if (!policy) - continue; - - if (cpufreq_frequency_table_target(policy, bfin_freq_table, - target_freq, relation, &index)) - return -EINVAL; - - cclk_hz = bfin_freq_table[index].frequency; - - freqs.old = bfin_getfreq_khz(0); - freqs.new = cclk_hz; - freqs.cpu = cpu; - - pr_debug("cpufreq: changing cclk to %lu; target = %u, oldfreq = %u\n", - cclk_hz, target_freq, freqs.old); - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - if (cpu == CPUFREQ_CPU) { -#ifndef CONFIG_BF60x - plldiv = (bfin_read_PLL_DIV() & SSEL) | - dpm_state_table[index].csel; - bfin_write_PLL_DIV(plldiv); -#else - ret = cpu_set_cclk(cpu, freqs.new * 1000); - if (ret != 0) { - WARN_ONCE(ret, "cpufreq set freq failed %d\n", ret); - break; - } -#endif - on_each_cpu(bfin_adjust_core_timer, &index, 1); -#if defined(CONFIG_CYCLES_CLOCKSOURCE) - cycles = get_cycles(); - SSYNC(); - cycles += 10; /* ~10 cycles we lose after get_cycles() */ - __bfin_cycles_off += - (cycles << __bfin_cycles_mod) - (cycles << index); - __bfin_cycles_mod = index; -#endif - if (!lpj_ref_freq) { - lpj_ref = loops_per_jiffy; - lpj_ref_freq = freqs.old; - } - if (freqs.new != freqs.old) { - loops_per_jiffy = cpufreq_scale(lpj_ref, - lpj_ref_freq, freqs.new); - } - } - /* TODO: just test case for cycles clock source, remove later */ - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - } - - pr_debug("cpufreq: done\n"); - return ret; -} - -static int bfin_verify_speed(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, bfin_freq_table); -} - -static int __bfin_cpu_init(struct cpufreq_policy *policy) -{ - - unsigned long cclk, sclk; - - cclk = get_cclk() / 1000; - sclk = get_sclk() / 1000; - - if (policy->cpu == CPUFREQ_CPU) - bfin_init_tables(cclk, sclk); - - policy->cpuinfo.transition_latency = 50000; /* 50us assumed */ - - policy->cur = cclk; - cpufreq_frequency_table_get_attr(bfin_freq_table, policy->cpu); - return cpufreq_frequency_table_cpuinfo(policy, bfin_freq_table); -} - -static struct freq_attr *bfin_freq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver bfin_driver = { - .verify = bfin_verify_speed, - .target = bfin_target, - .get = bfin_getfreq_khz, - .init = __bfin_cpu_init, - .name = "bfin cpufreq", - .owner = THIS_MODULE, - .attr = bfin_freq_attr, -}; - -static int __init bfin_cpu_init(void) -{ - return cpufreq_register_driver(&bfin_driver); -} - -static void __exit bfin_cpu_exit(void) -{ - cpufreq_unregister_driver(&bfin_driver); -} - -MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); -MODULE_DESCRIPTION("cpufreq driver for Blackfin"); -MODULE_LICENSE("GPL"); - -module_init(bfin_cpu_init); -module_exit(bfin_cpu_exit); diff --git a/arch/blackfin/mach-common/dpmc.c b/arch/blackfin/mach-common/dpmc.c index f5685a496c5..724a8c5f557 100644 --- a/arch/blackfin/mach-common/dpmc.c +++ b/arch/blackfin/mach-common/dpmc.c @@ -129,7 +129,7 @@ static struct notifier_block vreg_cpufreq_notifier_block = { * bfin_dpmc_probe - * */ -static int __devinit bfin_dpmc_probe(struct platform_device *pdev) +static int bfin_dpmc_probe(struct platform_device *pdev) { if (pdev->dev.platform_data) pdata = pdev->dev.platform_data; @@ -143,7 +143,7 @@ static int __devinit bfin_dpmc_probe(struct platform_device *pdev) /** * bfin_dpmc_remove - */ -static int __devexit bfin_dpmc_remove(struct platform_device *pdev) +static int bfin_dpmc_remove(struct platform_device *pdev) { pdata = NULL; return cpufreq_unregister_notifier(&vreg_cpufreq_notifier_block, @@ -152,29 +152,12 @@ static int __devexit bfin_dpmc_remove(struct platform_device *pdev) struct platform_driver bfin_dpmc_device_driver = { .probe = bfin_dpmc_probe, - .remove = __devexit_p(bfin_dpmc_remove), + .remove = bfin_dpmc_remove, .driver = { .name = DRIVER_NAME, } }; - -/** - * bfin_dpmc_init - Init driver - */ -static int __init bfin_dpmc_init(void) -{ - return platform_driver_register(&bfin_dpmc_device_driver); -} -module_init(bfin_dpmc_init); - -/** - * bfin_dpmc_exit - break down driver - */ -static void __exit bfin_dpmc_exit(void) -{ - platform_driver_unregister(&bfin_dpmc_device_driver); -} -module_exit(bfin_dpmc_exit); +module_platform_driver(bfin_dpmc_device_driver); MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); MODULE_DESCRIPTION("cpu power management driver for Blackfin"); diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 1c3d2c5bb0b..86b5a095c5a 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -530,61 +530,6 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/ jump .Lsyscall_really_exit; ENDPROC(_trap) -ENTRY(_kernel_execve) - link SIZEOF_PTREGS; - p0 = sp; - r3 = SIZEOF_PTREGS / 4; - r4 = 0(x); -.Lclear_regs: - [p0++] = r4; - r3 += -1; - cc = r3 == 0; - if !cc jump .Lclear_regs (bp); - - p0 = sp; - sp += -16; - [sp + 12] = p0; - pseudo_long_call _do_execve, p5; - SP += 16; - cc = r0 == 0; - if ! cc jump .Lexecve_failed; - /* Success. Copy our temporary pt_regs to the top of the kernel - * stack and do a normal exception return. - */ - r1 = sp; - r0 = (-KERNEL_STACK_SIZE) (x); - r1 = r1 & r0; - p2 = r1; - p3 = [p2]; - r0 = KERNEL_STACK_SIZE - 4 (z); - p1 = r0; - p1 = p1 + p2; - - p0 = fp; - r4 = [p0--]; - r3 = SIZEOF_PTREGS / 4; -.Lcopy_regs: - r4 = [p0--]; - [p1--] = r4; - r3 += -1; - cc = r3 == 0; - if ! cc jump .Lcopy_regs (bp); - - r0 = (KERNEL_STACK_SIZE - SIZEOF_PTREGS) (z); - p1 = r0; - p1 = p1 + p2; - sp = p1; - r0 = syscfg; - [SP + PT_SYSCFG] = r0; - [p3 + (TASK_THREAD + THREAD_KSP)] = sp; - - RESTORE_CONTEXT; - rti; -.Lexecve_failed: - unlink; - rts; -ENDPROC(_kernel_execve) - ENTRY(_system_call) /* Store IPEND */ p2.l = lo(IPEND); @@ -1486,7 +1431,7 @@ ENTRY(_sys_call_table) .long _sys_ni_syscall /* old sys_ipc */ .long _sys_fsync .long _sys_ni_syscall /* old sys_sigreturn */ - .long _sys_clone /* 120 */ + .long _bfin_clone /* 120 */ .long _sys_setdomainname .long _sys_newuname .long _sys_ni_syscall /* old sys_modify_ldt */ diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index 902bebc434c..1f94784eab6 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -28,12 +28,6 @@ #include <asm/dpmc.h> #include <asm/traps.h> -#ifndef SEC_GCTL -# define SIC_SYSIRQ(irq) (irq - (IRQ_CORETMR + 1)) -#else -# define SIC_SYSIRQ(irq) ((irq) - IVG15) -#endif - /* * NOTES: * - we have separated the physical Hardware interrupt from the @@ -141,13 +135,13 @@ static void bfin_core_unmask_irq(struct irq_data *d) return; } +#ifndef SEC_GCTL void bfin_internal_mask_irq(unsigned int irq) { unsigned long flags = hard_local_irq_save(); -#ifndef SEC_GCTL #ifdef SIC_IMASK0 - unsigned mask_bank = SIC_SYSIRQ(irq) / 32; - unsigned mask_bit = SIC_SYSIRQ(irq) % 32; + unsigned mask_bank = BFIN_SYSIRQ(irq) / 32; + unsigned mask_bit = BFIN_SYSIRQ(irq) % 32; bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) & ~(1 << mask_bit)); # if defined(CONFIG_SMP) || defined(CONFIG_ICC) @@ -156,9 +150,8 @@ void bfin_internal_mask_irq(unsigned int irq) # endif #else bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() & - ~(1 << SIC_SYSIRQ(irq))); + ~(1 << BFIN_SYSIRQ(irq))); #endif /* end of SIC_IMASK0 */ -#endif hard_local_irq_restore(flags); } @@ -176,10 +169,9 @@ void bfin_internal_unmask_irq(unsigned int irq) { unsigned long flags = hard_local_irq_save(); -#ifndef SEC_GCTL #ifdef SIC_IMASK0 - unsigned mask_bank = SIC_SYSIRQ(irq) / 32; - unsigned mask_bit = SIC_SYSIRQ(irq) % 32; + unsigned mask_bank = BFIN_SYSIRQ(irq) / 32; + unsigned mask_bit = BFIN_SYSIRQ(irq) % 32; # ifdef CONFIG_SMP if (cpumask_test_cpu(0, affinity)) # endif @@ -194,17 +186,103 @@ void bfin_internal_unmask_irq(unsigned int irq) # endif #else bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() | - (1 << SIC_SYSIRQ(irq))); + (1 << BFIN_SYSIRQ(irq))); +#endif + hard_local_irq_restore(flags); +} + +#ifdef CONFIG_SMP +static void bfin_internal_unmask_irq_chip(struct irq_data *d) +{ + bfin_internal_unmask_irq_affinity(d->irq, d->affinity); +} + +static int bfin_internal_set_affinity(struct irq_data *d, + const struct cpumask *mask, bool force) +{ + bfin_internal_mask_irq(d->irq); + bfin_internal_unmask_irq_affinity(d->irq, mask); + + return 0; +} +#else +static void bfin_internal_unmask_irq_chip(struct irq_data *d) +{ + bfin_internal_unmask_irq(d->irq); +} +#endif + +#if defined(CONFIG_PM) +int bfin_internal_set_wake(unsigned int irq, unsigned int state) +{ + u32 bank, bit, wakeup = 0; + unsigned long flags; + bank = BFIN_SYSIRQ(irq) / 32; + bit = BFIN_SYSIRQ(irq) % 32; + + switch (irq) { +#ifdef IRQ_RTC + case IRQ_RTC: + wakeup |= WAKE; + break; +#endif +#ifdef IRQ_CAN0_RX + case IRQ_CAN0_RX: + wakeup |= CANWE; + break; +#endif +#ifdef IRQ_CAN1_RX + case IRQ_CAN1_RX: + wakeup |= CANWE; + break; +#endif +#ifdef IRQ_USB_INT0 + case IRQ_USB_INT0: + wakeup |= USBWE; + break; #endif +#ifdef CONFIG_BF54x + case IRQ_CNT: + wakeup |= ROTWE; + break; #endif + default: + break; + } + + flags = hard_local_irq_save(); + + if (state) { + bfin_sic_iwr[bank] |= (1 << bit); + vr_wakeup |= wakeup; + + } else { + bfin_sic_iwr[bank] &= ~(1 << bit); + vr_wakeup &= ~wakeup; + } + hard_local_irq_restore(flags); + + return 0; } -#ifdef SEC_GCTL +static int bfin_internal_set_wake_chip(struct irq_data *d, unsigned int state) +{ + return bfin_internal_set_wake(d->irq, state); +} +#else +inline int bfin_internal_set_wake(unsigned int irq, unsigned int state) +{ + return 0; +} +# define bfin_internal_set_wake_chip NULL +#endif + +#else /* SEC_GCTL */ static void bfin_sec_preflow_handler(struct irq_data *d) { unsigned long flags = hard_local_irq_save(); - unsigned int sid = SIC_SYSIRQ(d->irq); + unsigned int sid = BFIN_SYSIRQ(d->irq); bfin_write_SEC_SCI(0, SEC_CSID, sid); @@ -214,7 +292,7 @@ static void bfin_sec_preflow_handler(struct irq_data *d) static void bfin_sec_mask_ack_irq(struct irq_data *d) { unsigned long flags = hard_local_irq_save(); - unsigned int sid = SIC_SYSIRQ(d->irq); + unsigned int sid = BFIN_SYSIRQ(d->irq); bfin_write_SEC_SCI(0, SEC_CSID, sid); @@ -224,7 +302,7 @@ static void bfin_sec_mask_ack_irq(struct irq_data *d) static void bfin_sec_unmask_irq(struct irq_data *d) { unsigned long flags = hard_local_irq_save(); - unsigned int sid = SIC_SYSIRQ(d->irq); + unsigned int sid = BFIN_SYSIRQ(d->irq); bfin_write32(SEC_END, sid); @@ -269,7 +347,7 @@ static void bfin_sec_enable_sci(unsigned int sid) unsigned long flags = hard_local_irq_save(); uint32_t reg_sctl = bfin_read_SEC_SCTL(sid); - if (sid == SIC_SYSIRQ(IRQ_WATCH0)) + if (sid == BFIN_SYSIRQ(IRQ_WATCH0)) reg_sctl |= SEC_SCTL_FAULT_EN; else reg_sctl |= SEC_SCTL_INT_EN; @@ -292,7 +370,7 @@ static void bfin_sec_disable_sci(unsigned int sid) static void bfin_sec_enable(struct irq_data *d) { unsigned long flags = hard_local_irq_save(); - unsigned int sid = SIC_SYSIRQ(d->irq); + unsigned int sid = BFIN_SYSIRQ(d->irq); bfin_sec_enable_sci(sid); bfin_sec_enable_ssi(sid); @@ -303,7 +381,7 @@ static void bfin_sec_enable(struct irq_data *d) static void bfin_sec_disable(struct irq_data *d) { unsigned long flags = hard_local_irq_save(); - unsigned int sid = SIC_SYSIRQ(d->irq); + unsigned int sid = BFIN_SYSIRQ(d->irq); bfin_sec_disable_sci(sid); bfin_sec_disable_ssi(sid); @@ -328,9 +406,10 @@ static void bfin_sec_set_priority(unsigned int sec_int_levels, u8 *sec_int_prior hard_local_irq_restore(flags); } -void bfin_sec_raise_irq(unsigned int sid) +void bfin_sec_raise_irq(unsigned int irq) { unsigned long flags = hard_local_irq_save(); + unsigned int sid = BFIN_SYSIRQ(irq); bfin_write32(SEC_RAISE, sid); @@ -341,8 +420,13 @@ static void init_software_driven_irq(void) { bfin_sec_set_ssi_coreid(34, 0); bfin_sec_set_ssi_coreid(35, 1); + + bfin_sec_enable_sci(35); + bfin_sec_enable_ssi(35); bfin_sec_set_ssi_coreid(36, 0); bfin_sec_set_ssi_coreid(37, 1); + bfin_sec_enable_sci(37); + bfin_sec_enable_ssi(37); } void bfin_sec_resume(void) @@ -387,13 +471,8 @@ void handle_sec_ssi_fault(uint32_t gstat) } -void handle_sec_fault(unsigned int irq, struct irq_desc *desc) +void handle_sec_fault(uint32_t sec_gstat) { - uint32_t sec_gstat; - - raw_spin_lock(&desc->lock); - - sec_gstat = bfin_read32(SEC_GSTAT); if (sec_gstat & SEC_GSTAT_ERR) { switch (sec_gstat & SEC_GSTAT_ERRC) { @@ -410,16 +489,16 @@ void handle_sec_fault(unsigned int irq, struct irq_desc *desc) } - - raw_spin_unlock(&desc->lock); } -void handle_core_fault(unsigned int irq, struct irq_desc *desc) +static struct irqaction bfin_fault_irq = { + .name = "Blackfin fault", +}; + +static irqreturn_t bfin_fault_routine(int irq, void *data) { struct pt_regs *fp = get_irq_regs(); - raw_spin_lock(&desc->lock); - switch (irq) { case IRQ_C0_DBL_FAULT: double_fault_c(fp); @@ -431,105 +510,22 @@ void handle_core_fault(unsigned int irq, struct irq_desc *desc) printk(KERN_NOTICE "Kernel Stack\n"); show_stack(current, NULL); print_modules(); - panic("Kernel core hardware error"); + panic("Core 0 hardware error"); break; case IRQ_C0_NMI_L1_PARITY_ERR: - panic("NMI occurs unexpectedly"); + panic("Core 0 NMI L1 parity error"); + break; + case IRQ_SEC_ERR: + pr_err("SEC error\n"); + handle_sec_fault(bfin_read32(SEC_GSTAT)); break; default: - panic("Core 1 fault occurs unexpectedly"); - } - - raw_spin_unlock(&desc->lock); -} -#endif - -#ifdef CONFIG_SMP -static void bfin_internal_unmask_irq_chip(struct irq_data *d) -{ - bfin_internal_unmask_irq_affinity(d->irq, d->affinity); -} - -static int bfin_internal_set_affinity(struct irq_data *d, - const struct cpumask *mask, bool force) -{ - bfin_internal_mask_irq(d->irq); - bfin_internal_unmask_irq_affinity(d->irq, mask); - - return 0; -} -#else -static void bfin_internal_unmask_irq_chip(struct irq_data *d) -{ - bfin_internal_unmask_irq(d->irq); -} -#endif - -#if defined(CONFIG_PM) && !defined(SEC_GCTL) -int bfin_internal_set_wake(unsigned int irq, unsigned int state) -{ - u32 bank, bit, wakeup = 0; - unsigned long flags; - bank = SIC_SYSIRQ(irq) / 32; - bit = SIC_SYSIRQ(irq) % 32; - - switch (irq) { -#ifdef IRQ_RTC - case IRQ_RTC: - wakeup |= WAKE; - break; -#endif -#ifdef IRQ_CAN0_RX - case IRQ_CAN0_RX: - wakeup |= CANWE; - break; -#endif -#ifdef IRQ_CAN1_RX - case IRQ_CAN1_RX: - wakeup |= CANWE; - break; -#endif -#ifdef IRQ_USB_INT0 - case IRQ_USB_INT0: - wakeup |= USBWE; - break; -#endif -#ifdef CONFIG_BF54x - case IRQ_CNT: - wakeup |= ROTWE; - break; -#endif - default: - break; - } - - flags = hard_local_irq_save(); - - if (state) { - bfin_sic_iwr[bank] |= (1 << bit); - vr_wakeup |= wakeup; - - } else { - bfin_sic_iwr[bank] &= ~(1 << bit); - vr_wakeup &= ~wakeup; + panic("Unknown fault %d", irq); } - hard_local_irq_restore(flags); - - return 0; -} - -static int bfin_internal_set_wake_chip(struct irq_data *d, unsigned int state) -{ - return bfin_internal_set_wake(d->irq, state); -} -#else -inline int bfin_internal_set_wake(unsigned int irq, unsigned int state) -{ - return 0; + return IRQ_HANDLED; } -# define bfin_internal_set_wake_chip NULL -#endif +#endif /* SEC_GCTL */ static struct irq_chip bfin_core_irqchip = { .name = "CORE", @@ -537,6 +533,7 @@ static struct irq_chip bfin_core_irqchip = { .irq_unmask = bfin_core_unmask_irq, }; +#ifndef SEC_GCTL static struct irq_chip bfin_internal_irqchip = { .name = "INTN", .irq_mask = bfin_internal_mask_irq_chip, @@ -548,8 +545,7 @@ static struct irq_chip bfin_internal_irqchip = { #endif .irq_set_wake = bfin_internal_set_wake_chip, }; - -#ifdef SEC_GCTL +#else static struct irq_chip bfin_sec_irqchip = { .name = "SEC", .irq_mask_ack = bfin_sec_mask_ack_irq, @@ -705,10 +701,9 @@ static inline void bfin_set_irq_handler(unsigned irq, irq_flow_handler_t handle) __irq_set_handler_locked(irq, handle); } -static DECLARE_BITMAP(gpio_enabled, MAX_BLACKFIN_GPIOS); -extern void bfin_gpio_irq_prepare(unsigned gpio); +#ifdef CONFIG_GPIO_ADI -#if !BFIN_GPIO_PINT +static DECLARE_BITMAP(gpio_enabled, MAX_BLACKFIN_GPIOS); static void bfin_gpio_ack_irq(struct irq_data *d) { @@ -822,15 +817,6 @@ static int bfin_gpio_irq_type(struct irq_data *d, unsigned int type) return 0; } -#ifdef CONFIG_PM -static int bfin_gpio_set_wake(struct irq_data *d, unsigned int state) -{ - return gpio_pm_wakeup_ctrl(irq_to_gpio(d->irq), state); -} -#else -# define bfin_gpio_set_wake NULL -#endif - static void bfin_demux_gpio_block(unsigned int irq) { unsigned int gpio, mask; @@ -897,283 +883,46 @@ void bfin_demux_gpio_irq(unsigned int inta_irq, bfin_demux_gpio_block(irq); } -#else - -#define NR_PINT_BITS 32 -#define IRQ_NOT_AVAIL 0xFF - -#define PINT_2_BANK(x) ((x) >> 5) -#define PINT_2_BIT(x) ((x) & 0x1F) -#define PINT_BIT(x) (1 << (PINT_2_BIT(x))) - -static unsigned char irq2pint_lut[NR_PINTS]; -static unsigned char pint2irq_lut[NR_PINT_SYS_IRQS * NR_PINT_BITS]; - -static struct bfin_pint_regs * const pint[NR_PINT_SYS_IRQS] = { - (struct bfin_pint_regs *)PINT0_MASK_SET, - (struct bfin_pint_regs *)PINT1_MASK_SET, - (struct bfin_pint_regs *)PINT2_MASK_SET, - (struct bfin_pint_regs *)PINT3_MASK_SET, -#ifdef CONFIG_BF60x - (struct bfin_pint_regs *)PINT4_MASK_SET, - (struct bfin_pint_regs *)PINT5_MASK_SET, -#endif -}; - -inline unsigned int get_irq_base(u32 bank, u8 bmap) -{ - unsigned int irq_base; - -#ifndef CONFIG_BF60x - if (bank < 2) { /*PA-PB */ - irq_base = IRQ_PA0 + bmap * 16; - } else { /*PC-PJ */ - irq_base = IRQ_PC0 + bmap * 16; - } -#else - irq_base = IRQ_PA0 + bank * 16 + bmap * 16; -#endif - return irq_base; -} - - /* Whenever PINTx_ASSIGN is altered init_pint_lut() must be executed! */ -void init_pint_lut(void) -{ - u16 bank, bit, irq_base, bit_pos; - u32 pint_assign; - u8 bmap; - - memset(irq2pint_lut, IRQ_NOT_AVAIL, sizeof(irq2pint_lut)); - - for (bank = 0; bank < NR_PINT_SYS_IRQS; bank++) { - - pint_assign = pint[bank]->assign; - - for (bit = 0; bit < NR_PINT_BITS; bit++) { - - bmap = (pint_assign >> ((bit / 8) * 8)) & 0xFF; - - irq_base = get_irq_base(bank, bmap); - - irq_base += (bit % 8) + ((bit / 8) & 1 ? 8 : 0); - bit_pos = bit + bank * NR_PINT_BITS; - - pint2irq_lut[bit_pos] = irq_base - SYS_IRQS; - irq2pint_lut[irq_base - SYS_IRQS] = bit_pos; - } - } -} - -static void bfin_gpio_ack_irq(struct irq_data *d) -{ - u32 pint_val = irq2pint_lut[d->irq - SYS_IRQS]; - u32 pintbit = PINT_BIT(pint_val); - u32 bank = PINT_2_BANK(pint_val); - - if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) { - if (pint[bank]->invert_set & pintbit) - pint[bank]->invert_clear = pintbit; - else - pint[bank]->invert_set = pintbit; - } - pint[bank]->request = pintbit; - -} - -static void bfin_gpio_mask_ack_irq(struct irq_data *d) -{ - u32 pint_val = irq2pint_lut[d->irq - SYS_IRQS]; - u32 pintbit = PINT_BIT(pint_val); - u32 bank = PINT_2_BANK(pint_val); - - if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) { - if (pint[bank]->invert_set & pintbit) - pint[bank]->invert_clear = pintbit; - else - pint[bank]->invert_set = pintbit; - } - - pint[bank]->request = pintbit; - pint[bank]->mask_clear = pintbit; -} - -static void bfin_gpio_mask_irq(struct irq_data *d) -{ - u32 pint_val = irq2pint_lut[d->irq - SYS_IRQS]; - - pint[PINT_2_BANK(pint_val)]->mask_clear = PINT_BIT(pint_val); -} - -static void bfin_gpio_unmask_irq(struct irq_data *d) -{ - u32 pint_val = irq2pint_lut[d->irq - SYS_IRQS]; - u32 pintbit = PINT_BIT(pint_val); - u32 bank = PINT_2_BANK(pint_val); - - pint[bank]->mask_set = pintbit; -} - -static unsigned int bfin_gpio_irq_startup(struct irq_data *d) -{ - unsigned int irq = d->irq; - u32 gpionr = irq_to_gpio(irq); - u32 pint_val = irq2pint_lut[irq - SYS_IRQS]; - - if (pint_val == IRQ_NOT_AVAIL) { - printk(KERN_ERR - "GPIO IRQ %d :Not in PINT Assign table " - "Reconfigure Interrupt to Port Assignemt\n", irq); - return -ENODEV; - } - - if (__test_and_set_bit(gpionr, gpio_enabled)) - bfin_gpio_irq_prepare(gpionr); - - bfin_gpio_unmask_irq(d); - - return 0; -} - -static void bfin_gpio_irq_shutdown(struct irq_data *d) -{ - u32 gpionr = irq_to_gpio(d->irq); - - bfin_gpio_mask_irq(d); - __clear_bit(gpionr, gpio_enabled); - bfin_gpio_irq_free(gpionr); -} - -static int bfin_gpio_irq_type(struct irq_data *d, unsigned int type) -{ - unsigned int irq = d->irq; - int ret; - char buf[16]; - u32 gpionr = irq_to_gpio(irq); - u32 pint_val = irq2pint_lut[irq - SYS_IRQS]; - u32 pintbit = PINT_BIT(pint_val); - u32 bank = PINT_2_BANK(pint_val); - - if (pint_val == IRQ_NOT_AVAIL) - return -ENODEV; - - if (type == IRQ_TYPE_PROBE) { - /* only probe unenabled GPIO interrupt lines */ - if (test_bit(gpionr, gpio_enabled)) - return 0; - type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; - } - - if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING | - IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { - - snprintf(buf, 16, "gpio-irq%d", irq); - ret = bfin_gpio_irq_request(gpionr, buf); - if (ret) - return ret; - - if (__test_and_set_bit(gpionr, gpio_enabled)) - bfin_gpio_irq_prepare(gpionr); - - } else { - __clear_bit(gpionr, gpio_enabled); - return 0; - } - - if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW))) - pint[bank]->invert_set = pintbit; /* low or falling edge denoted by one */ - else - pint[bank]->invert_clear = pintbit; /* high or rising edge denoted by zero */ - - if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) - == (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) { - if (gpio_get_value(gpionr)) - pint[bank]->invert_set = pintbit; - else - pint[bank]->invert_clear = pintbit; - } - - if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) { - pint[bank]->edge_set = pintbit; - bfin_set_irq_handler(irq, handle_edge_irq); - } else { - pint[bank]->edge_clear = pintbit; - bfin_set_irq_handler(irq, handle_level_irq); - } - - return 0; -} - #ifdef CONFIG_PM -static struct bfin_pm_pint_save save_pint_reg[NR_PINT_SYS_IRQS]; -static u32 save_pint_sec_ctl[NR_PINT_SYS_IRQS]; static int bfin_gpio_set_wake(struct irq_data *d, unsigned int state) { - u32 pint_irq; - u32 pint_val = irq2pint_lut[d->irq - SYS_IRQS]; - u32 bank = PINT_2_BANK(pint_val); - - switch (bank) { - case 0: - pint_irq = IRQ_PINT0; - break; - case 2: - pint_irq = IRQ_PINT2; - break; - case 3: - pint_irq = IRQ_PINT3; - break; - case 1: - pint_irq = IRQ_PINT1; - break; -#ifdef CONFIG_BF60x - case 4: - pint_irq = IRQ_PINT4; - break; - case 5: - pint_irq = IRQ_PINT5; - break; -#endif - default: - return -EINVAL; - } + return bfin_gpio_pm_wakeup_ctrl(irq_to_gpio(d->irq), state); +} - bfin_internal_set_wake(pint_irq, state); +#else - return 0; -} +# define bfin_gpio_set_wake NULL -void bfin_pint_suspend(void) -{ - u32 bank; +#endif - for (bank = 0; bank < NR_PINT_SYS_IRQS; bank++) { - save_pint_reg[bank].mask_set = pint[bank]->mask_set; - save_pint_reg[bank].assign = pint[bank]->assign; - save_pint_reg[bank].edge_set = pint[bank]->edge_set; - save_pint_reg[bank].invert_set = pint[bank]->invert_set; - } -} +static struct irq_chip bfin_gpio_irqchip = { + .name = "GPIO", + .irq_ack = bfin_gpio_ack_irq, + .irq_mask = bfin_gpio_mask_irq, + .irq_mask_ack = bfin_gpio_mask_ack_irq, + .irq_unmask = bfin_gpio_unmask_irq, + .irq_disable = bfin_gpio_mask_irq, + .irq_enable = bfin_gpio_unmask_irq, + .irq_set_type = bfin_gpio_irq_type, + .irq_startup = bfin_gpio_irq_startup, + .irq_shutdown = bfin_gpio_irq_shutdown, + .irq_set_wake = bfin_gpio_set_wake, +}; -void bfin_pint_resume(void) -{ - u32 bank; +#endif - for (bank = 0; bank < NR_PINT_SYS_IRQS; bank++) { - pint[bank]->mask_set = save_pint_reg[bank].mask_set; - pint[bank]->assign = save_pint_reg[bank].assign; - pint[bank]->edge_set = save_pint_reg[bank].edge_set; - pint[bank]->invert_set = save_pint_reg[bank].invert_set; - } -} +#ifdef CONFIG_PM #ifdef SEC_GCTL +static u32 save_pint_sec_ctl[NR_PINT_SYS_IRQS]; + static int sec_suspend(void) { u32 bank; for (bank = 0; bank < NR_PINT_SYS_IRQS; bank++) - save_pint_sec_ctl[bank] = bfin_read_SEC_SCTL(bank + SIC_SYSIRQ(IRQ_PINT0)); + save_pint_sec_ctl[bank] = bfin_read_SEC_SCTL(bank + BFIN_SYSIRQ(IRQ_PINT0)); return 0; } @@ -1187,7 +936,7 @@ static void sec_resume(void) bfin_write_SEC_SCI(0, SEC_CCTL, SEC_CCTL_EN | SEC_CCTL_NMI_EN); for (bank = 0; bank < NR_PINT_SYS_IRQS; bank++) - bfin_write_SEC_SCTL(bank + SIC_SYSIRQ(IRQ_PINT0), save_pint_sec_ctl[bank]); + bfin_write_SEC_SCTL(bank + BFIN_SYSIRQ(IRQ_PINT0), save_pint_sec_ctl[bank]); } static struct syscore_ops sec_pm_syscore_ops = { @@ -1195,91 +944,10 @@ static struct syscore_ops sec_pm_syscore_ops = { .resume = sec_resume, }; #endif -#else -# define bfin_gpio_set_wake NULL -#endif - -void bfin_demux_gpio_irq(unsigned int inta_irq, - struct irq_desc *desc) -{ - u32 bank, pint_val; - u32 request, irq; - u32 level_mask; - int umask = 0; - struct irq_chip *chip = irq_desc_get_chip(desc); - - if (chip->irq_mask_ack) { - chip->irq_mask_ack(&desc->irq_data); - } else { - chip->irq_mask(&desc->irq_data); - if (chip->irq_ack) - chip->irq_ack(&desc->irq_data); - } - switch (inta_irq) { - case IRQ_PINT0: - bank = 0; - break; - case IRQ_PINT2: - bank = 2; - break; - case IRQ_PINT3: - bank = 3; - break; - case IRQ_PINT1: - bank = 1; - break; -#ifdef CONFIG_BF60x - case IRQ_PINT4: - bank = 4; - break; - case IRQ_PINT5: - bank = 5; - break; #endif - default: - return; - } - - pint_val = bank * NR_PINT_BITS; - request = pint[bank]->request; - - level_mask = pint[bank]->edge_set & request; - - while (request) { - if (request & 1) { - irq = pint2irq_lut[pint_val] + SYS_IRQS; - if (level_mask & PINT_BIT(pint_val)) { - umask = 1; - chip->irq_unmask(&desc->irq_data); - } - bfin_handle_irq(irq); - } - pint_val++; - request >>= 1; - } - - if (!umask) - chip->irq_unmask(&desc->irq_data); -} -#endif - -static struct irq_chip bfin_gpio_irqchip = { - .name = "GPIO", - .irq_ack = bfin_gpio_ack_irq, - .irq_mask = bfin_gpio_mask_irq, - .irq_mask_ack = bfin_gpio_mask_ack_irq, - .irq_unmask = bfin_gpio_unmask_irq, - .irq_disable = bfin_gpio_mask_irq, - .irq_enable = bfin_gpio_unmask_irq, - .irq_set_type = bfin_gpio_irq_type, - .irq_startup = bfin_gpio_irq_startup, - .irq_shutdown = bfin_gpio_irq_shutdown, - .irq_set_wake = bfin_gpio_set_wake, -}; - -void __cpuinit init_exception_vectors(void) +void init_exception_vectors(void) { /* cannot program in software: * evt0 - emulation (jtag) @@ -1329,17 +997,6 @@ int __init init_arch_irq(void) local_irq_disable(); -#if BFIN_GPIO_PINT -# ifdef CONFIG_PINTx_REASSIGN - pint[0]->assign = CONFIG_PINT0_ASSIGN; - pint[1]->assign = CONFIG_PINT1_ASSIGN; - pint[2]->assign = CONFIG_PINT2_ASSIGN; - pint[3]->assign = CONFIG_PINT3_ASSIGN; -# endif - /* Whenever PINTx_ASSIGN is altered init_pint_lut() must be executed! */ - init_pint_lut(); -#endif - for (irq = 0; irq <= SYS_IRQS; irq++) { if (irq <= IRQ_CORETMR) irq_set_chip(irq, &bfin_core_irqchip); @@ -1347,12 +1004,8 @@ int __init init_arch_irq(void) irq_set_chip(irq, &bfin_internal_irqchip); switch (irq) { -#if BFIN_GPIO_PINT - case IRQ_PINT0: - case IRQ_PINT1: - case IRQ_PINT2: - case IRQ_PINT3: -#elif defined(BF537_FAMILY) +#if !BFIN_GPIO_PINT +#if defined(BF537_FAMILY) case IRQ_PH_INTA_MAC_RX: case IRQ_PF_INTA_PG_INTA: #elif defined(BF533_FAMILY) @@ -1370,6 +1023,7 @@ int __init init_arch_irq(void) #endif irq_set_chained_handler(irq, bfin_demux_gpio_irq); break; +#endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) case IRQ_MAC_ERROR: irq_set_chained_handler(irq, @@ -1417,10 +1071,12 @@ int __init init_arch_irq(void) handle_level_irq); #endif /* if configured as edge, then will be changed to do_edge_IRQ */ +#ifdef CONFIG_GPIO_ADI for (irq = GPIO_IRQ_BASE; irq < (GPIO_IRQ_BASE + MAX_BLACKFIN_GPIOS); irq++) irq_set_chip_and_handler(irq, &bfin_gpio_irqchip, handle_level_irq); +#endif bfin_write_IMASK(0); CSYNC(); ilat = bfin_read_ILAT(); @@ -1523,55 +1179,23 @@ int __init init_arch_irq(void) local_irq_disable(); -#if BFIN_GPIO_PINT -# ifdef CONFIG_PINTx_REASSIGN - pint[0]->assign = CONFIG_PINT0_ASSIGN; - pint[1]->assign = CONFIG_PINT1_ASSIGN; - pint[2]->assign = CONFIG_PINT2_ASSIGN; - pint[3]->assign = CONFIG_PINT3_ASSIGN; - pint[4]->assign = CONFIG_PINT4_ASSIGN; - pint[5]->assign = CONFIG_PINT5_ASSIGN; -# endif - /* Whenever PINTx_ASSIGN is altered init_pint_lut() must be executed! */ - init_pint_lut(); -#endif - for (irq = 0; irq <= SYS_IRQS; irq++) { if (irq <= IRQ_CORETMR) { - irq_set_chip(irq, &bfin_core_irqchip); -#ifdef CONFIG_TICKSOURCE_CORETMR + irq_set_chip_and_handler(irq, &bfin_core_irqchip, + handle_simple_irq); +#if defined(CONFIG_TICKSOURCE_CORETMR) && defined(CONFIG_SMP) if (irq == IRQ_CORETMR) -# ifdef CONFIG_SMP irq_set_handler(irq, handle_percpu_irq); -# else - irq_set_handler(irq, handle_simple_irq); -# endif #endif - } else if (irq < BFIN_IRQ(0)) { - irq_set_chip_and_handler(irq, &bfin_internal_irqchip, - handle_simple_irq); - } else if (irq == IRQ_SEC_ERR) { - irq_set_chip_and_handler(irq, &bfin_sec_irqchip, - handle_sec_fault); - } else if (irq < CORE_IRQS && irq >= IRQ_C0_DBL_FAULT) { - irq_set_chip_and_handler(irq, &bfin_sec_irqchip, - handle_core_fault); - } else if (irq >= BFIN_IRQ(21) && irq <= BFIN_IRQ(26)) { - irq_set_chip(irq, &bfin_sec_irqchip); - irq_set_chained_handler(irq, bfin_demux_gpio_irq); } else if (irq >= BFIN_IRQ(34) && irq <= BFIN_IRQ(37)) { - irq_set_chip(irq, &bfin_sec_irqchip); - irq_set_handler(irq, handle_percpu_irq); - } else { irq_set_chip_and_handler(irq, &bfin_sec_irqchip, - handle_fasteoi_irq); + handle_percpu_irq); + } else { + irq_set_chip(irq, &bfin_sec_irqchip); + irq_set_handler(irq, handle_fasteoi_irq); __irq_set_preflow_handler(irq, bfin_sec_preflow_handler); } } - for (irq = GPIO_IRQ_BASE; - irq < (GPIO_IRQ_BASE + MAX_BLACKFIN_GPIOS); irq++) - irq_set_chip_and_handler(irq, &bfin_gpio_irqchip, - handle_level_irq); bfin_write_IMASK(0); CSYNC(); @@ -1584,8 +1208,6 @@ int __init init_arch_irq(void) bfin_sec_set_priority(CONFIG_SEC_IRQ_PRIORITY_LEVELS, sec_int_priority); - bfin_sec_set_priority(CONFIG_SEC_IRQ_PRIORITY_LEVELS, sec_int_priority); - /* Enable interrupts IVG7-15 */ bfin_irq_flags |= IMASK_IVG15 | IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 | @@ -1593,8 +1215,8 @@ int __init init_arch_irq(void) bfin_write_SEC_FCTL(SEC_FCTL_EN | SEC_FCTL_SYSRST_EN | SEC_FCTL_FLTIN_EN); - bfin_sec_enable_sci(SIC_SYSIRQ(IRQ_WATCH0)); - bfin_sec_enable_ssi(SIC_SYSIRQ(IRQ_WATCH0)); + bfin_sec_enable_sci(BFIN_SYSIRQ(IRQ_WATCH0)); + bfin_sec_enable_ssi(BFIN_SYSIRQ(IRQ_WATCH0)); bfin_write_SEC_SCI(0, SEC_CCTL, SEC_CCTL_RESET); udelay(100); bfin_write_SEC_GCTL(SEC_GCTL_EN); @@ -1602,7 +1224,17 @@ int __init init_arch_irq(void) bfin_write_SEC_SCI(1, SEC_CCTL, SEC_CCTL_EN | SEC_CCTL_NMI_EN); init_software_driven_irq(); + +#ifdef CONFIG_PM register_syscore_ops(&sec_pm_syscore_ops); +#endif + + bfin_fault_irq.handler = bfin_fault_routine; +#ifdef CONFIG_L1_PARITY_CHECK + setup_irq(IRQ_C0_NMI_L1_PARITY_ERR, &bfin_fault_irq); +#endif + setup_irq(IRQ_C0_DBL_FAULT, &bfin_fault_irq); + setup_irq(IRQ_SEC_ERR, &bfin_fault_irq); return 0; } diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c index 87bfe549ad3..1387a94bcfd 100644 --- a/arch/blackfin/mach-common/pm.c +++ b/arch/blackfin/mach-common/pm.c @@ -27,7 +27,7 @@ struct bfin_cpu_pm_fns *bfin_cpu_pm; void bfin_pm_suspend_standby_enter(void) { -#ifndef CONFIG_BF60x +#if !BFIN_GPIO_PINT bfin_pm_standby_setup(); #endif @@ -41,7 +41,7 @@ void bfin_pm_suspend_standby_enter(void) # endif #endif -#ifndef CONFIG_BF60x +#if !BFIN_GPIO_PINT bfin_pm_standby_restore(); #endif @@ -128,6 +128,7 @@ static void flushinv_all_dcache(void) if ((status & 0x3) != 0x3) continue; + /* construct the address using the tag */ addr = (status & 0xFFFFC800) | (subbank << 12) | (set << 5); @@ -140,11 +141,14 @@ static void flushinv_all_dcache(void) int bfin_pm_suspend_mem_enter(void) { - int wakeup, ret; + int ret; +#ifndef CONFIG_BF60x + int wakeup; +#endif unsigned char *memptr = kmalloc(L1_CODE_LENGTH + L1_DATA_A_LENGTH + L1_DATA_B_LENGTH + L1_SCRATCH_LENGTH, - GFP_KERNEL); + GFP_ATOMIC); if (memptr == NULL) { panic("bf53x_suspend_l1_mem malloc failed"); @@ -170,10 +174,8 @@ int bfin_pm_suspend_mem_enter(void) return ret; } +#ifdef CONFIG_GPIO_ADI bfin_gpio_pm_hibernate_suspend(); - -#if BFIN_GPIO_PINT - bfin_pint_suspend(); #endif #if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK) @@ -194,11 +196,9 @@ int bfin_pm_suspend_mem_enter(void) _enable_icplb(); _enable_dcplb(); -#if BFIN_GPIO_PINT - bfin_pint_resume(); -#endif - +#ifdef CONFIG_GPIO_ADI bfin_gpio_pm_hibernate_restore(); +#endif blackfin_dma_resume(); kfree(memptr); diff --git a/arch/blackfin/mach-common/scb-init.c b/arch/blackfin/mach-common/scb-init.c new file mode 100644 index 00000000000..8923398db66 --- /dev/null +++ b/arch/blackfin/mach-common/scb-init.c @@ -0,0 +1,52 @@ +/* + * arch/blackfin/mach-common/scb-init.c - reprogram system cross bar priority + * + * Copyright 2012 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <asm/scb.h> + +__attribute__((l1_text)) +inline void scb_mi_write(unsigned long scb_mi_arbw, unsigned int slots, + unsigned char *scb_mi_prio) +{ + unsigned int i; + + for (i = 0; i < slots; ++i) + bfin_write32(scb_mi_arbw, (i << SCB_SLOT_OFFSET) | scb_mi_prio[i]); +} + +__attribute__((l1_text)) +inline void scb_mi_read(unsigned long scb_mi_arbw, unsigned int slots, + unsigned char *scb_mi_prio) +{ + unsigned int i; + + for (i = 0; i < slots; ++i) { + bfin_write32(scb_mi_arbw, (0xFF << SCB_SLOT_OFFSET) | i); + scb_mi_prio[i] = bfin_read32(scb_mi_arbw); + } +} + +__attribute__((l1_text)) +void init_scb(void) +{ + unsigned int i, j; + unsigned char scb_tmp_prio[32]; + + pr_info("Init System Crossbar\n"); + for (i = 0; scb_data[i].scb_mi_arbr > 0; ++i) { + + scb_mi_write(scb_data[i].scb_mi_arbw, scb_data[i].scb_mi_slots, scb_data[i].scb_mi_prio); + + pr_debug("scb priority at 0x%lx:\n", scb_data[i].scb_mi_arbr); + scb_mi_read(scb_data[i].scb_mi_arbw, scb_data[i].scb_mi_slots, scb_tmp_prio); + for (j = 0; j < scb_data[i].scb_mi_slots; ++j) + pr_debug("slot %d = %d\n", j, scb_tmp_prio[j]); + } + +} diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c index bb61ae4986e..ba6c30d8534 100644 --- a/arch/blackfin/mach-common/smp.c +++ b/arch/blackfin/mach-common/smp.c @@ -46,13 +46,13 @@ struct corelock_slot corelock __attribute__ ((__section__(".l2.bss"))); unsigned long blackfin_iflush_l1_entry[NR_CPUS]; #endif -struct blackfin_initial_pda __cpuinitdata initial_pda_coreb; +struct blackfin_initial_pda initial_pda_coreb; enum ipi_message_type { + BFIN_IPI_NONE, BFIN_IPI_TIMER, BFIN_IPI_RESCHEDULE, BFIN_IPI_CALL_FUNC, - BFIN_IPI_CALL_FUNC_SINGLE, BFIN_IPI_CPU_STOP, }; @@ -72,8 +72,8 @@ static DEFINE_SPINLOCK(stop_lock); /* Simple FIFO buffer, overflow leads to panic */ struct ipi_data { - unsigned long count; - unsigned long bits; + atomic_t count; + atomic_t bits; }; static DEFINE_PER_CPU(struct ipi_data, bfin_ipi); @@ -145,9 +145,9 @@ static irqreturn_t ipi_handler_int1(int irq, void *dev_instance) platform_clear_ipi(cpu, IRQ_SUPPLE_1); + smp_rmb(); bfin_ipi_data = &__get_cpu_var(bfin_ipi); - smp_mb(); - while ((pending = xchg(&bfin_ipi_data->bits, 0)) != 0) { + while ((pending = atomic_xchg(&bfin_ipi_data->bits, 0)) != 0) { msg = 0; do { msg = find_next_bit(&pending, BITS_PER_LONG, msg + 1); @@ -161,19 +161,17 @@ static irqreturn_t ipi_handler_int1(int irq, void *dev_instance) case BFIN_IPI_CALL_FUNC: generic_smp_call_function_interrupt(); break; - - case BFIN_IPI_CALL_FUNC_SINGLE: - generic_smp_call_function_single_interrupt(); - break; - case BFIN_IPI_CPU_STOP: ipi_cpu_stop(cpu); break; + default: + goto out; } + atomic_dec(&bfin_ipi_data->count); } while (msg < BITS_PER_LONG); - smp_mb(); } +out: return IRQ_HANDLED; } @@ -183,8 +181,8 @@ static void bfin_ipi_init(void) struct ipi_data *bfin_ipi_data; for_each_possible_cpu(cpu) { bfin_ipi_data = &per_cpu(bfin_ipi, cpu); - bfin_ipi_data->bits = 0; - bfin_ipi_data->count = 0; + atomic_set(&bfin_ipi_data->bits, 0); + atomic_set(&bfin_ipi_data->count, 0); } } @@ -195,21 +193,20 @@ void send_ipi(const struct cpumask *cpumask, enum ipi_message_type msg) unsigned long flags; local_irq_save(flags); - smp_mb(); for_each_cpu(cpu, cpumask) { bfin_ipi_data = &per_cpu(bfin_ipi, cpu); - smp_mb(); - set_bit(msg, &bfin_ipi_data->bits); - bfin_ipi_data->count++; - platform_send_ipi_cpu(cpu, IRQ_SUPPLE_1); + atomic_set_mask((1 << msg), &bfin_ipi_data->bits); + atomic_inc(&bfin_ipi_data->count); } - local_irq_restore(flags); + smp_wmb(); + for_each_cpu(cpu, cpumask) + platform_send_ipi_cpu(cpu, IRQ_SUPPLE_1); } void arch_send_call_function_single_ipi(int cpu) { - send_ipi(cpumask_of(cpu), BFIN_IPI_CALL_FUNC_SINGLE); + send_ipi(cpumask_of(cpu), BFIN_IPI_CALL_FUNC); } void arch_send_call_function_ipi_mask(const struct cpumask *mask) @@ -249,7 +246,7 @@ void smp_send_stop(void) return; } -int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *idle) +int __cpu_up(unsigned int cpu, struct task_struct *idle) { int ret; @@ -262,7 +259,7 @@ int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *idle) return ret; } -static void __cpuinit setup_secondary(unsigned int cpu) +static void setup_secondary(unsigned int cpu) { unsigned long ilat; @@ -280,7 +277,7 @@ static void __cpuinit setup_secondary(unsigned int cpu) IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW; } -void __cpuinit secondary_start_kernel(void) +void secondary_start_kernel(void) { unsigned int cpu = smp_processor_id(); struct mm_struct *mm = &init_mm; @@ -319,7 +316,6 @@ void __cpuinit secondary_start_kernel(void) setup_secondary(cpu); platform_secondary_init(cpu); - /* setup local core timer */ bfin_local_timer_setup(); @@ -335,7 +331,9 @@ void __cpuinit secondary_start_kernel(void) */ calibrate_delay(); - cpu_idle(); + /* We are done with local CPU inits, unblock the boot CPU. */ + set_cpu_online(cpu, true); + cpu_startup_entry(CPUHP_ONLINE); } void __init smp_prepare_boot_cpu(void) @@ -404,7 +402,7 @@ EXPORT_SYMBOL(resync_core_dcache); #endif #ifdef CONFIG_HOTPLUG_CPU -int __cpuexit __cpu_disable(void) +int __cpu_disable(void) { unsigned int cpu = smp_processor_id(); @@ -417,7 +415,7 @@ int __cpuexit __cpu_disable(void) static DECLARE_COMPLETION(cpu_killed); -int __cpuexit __cpu_die(unsigned int cpu) +int __cpu_die(unsigned int cpu) { return wait_for_completion_timeout(&cpu_killed, 5000); } diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c index 9cb85537bd2..166842de3dc 100644 --- a/arch/blackfin/mm/init.c +++ b/arch/blackfin/mm/init.c @@ -90,63 +90,24 @@ asmlinkage void __init init_pda(void) void __init mem_init(void) { - unsigned int codek = 0, datak = 0, initk = 0; - unsigned int reservedpages = 0, freepages = 0; - unsigned long tmp; - unsigned long start_mem = memory_start; - unsigned long end_mem = memory_end; - - end_mem &= PAGE_MASK; - high_memory = (void *)end_mem; - - start_mem = PAGE_ALIGN(start_mem); - max_mapnr = num_physpages = MAP_NR(high_memory); - printk(KERN_DEBUG "Kernel managed physical pages: %lu\n", num_physpages); - - /* This will put all memory onto the freelists. */ - totalram_pages = free_all_bootmem(); - - reservedpages = 0; - for (tmp = ARCH_PFN_OFFSET; tmp < max_mapnr; tmp++) - if (PageReserved(pfn_to_page(tmp))) - reservedpages++; - freepages = max_mapnr - ARCH_PFN_OFFSET - reservedpages; - - /* do not count in kernel image between _rambase and _ramstart */ - reservedpages -= (_ramstart - _rambase) >> PAGE_SHIFT; -#if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263) - reservedpages += (_ramend - memory_end - DMA_UNCACHED_REGION) >> PAGE_SHIFT; -#endif + char buf[64]; - codek = (_etext - _stext) >> 10; - initk = (__init_end - __init_begin) >> 10; - datak = ((_ramstart - _rambase) >> 10) - codek - initk; + high_memory = (void *)(memory_end & PAGE_MASK); + max_mapnr = MAP_NR(high_memory); + printk(KERN_DEBUG "Kernel managed physical pages: %lu\n", max_mapnr); - printk(KERN_INFO - "Memory available: %luk/%luk RAM, " - "(%uk init code, %uk kernel code, %uk data, %uk dma, %uk reserved)\n", - (unsigned long) freepages << (PAGE_SHIFT-10), (_ramend - CONFIG_PHY_RAM_BASE_ADDRESS) >> 10, - initk, codek, datak, DMA_UNCACHED_REGION >> 10, (reservedpages << (PAGE_SHIFT-10))); -} + /* This will put all low memory onto the freelists. */ + free_all_bootmem(); -static void __init free_init_pages(const char *what, unsigned long begin, unsigned long end) -{ - unsigned long addr; - /* next to check that the page we free is not a partial page */ - for (addr = begin; addr + PAGE_SIZE <= end; addr += PAGE_SIZE) { - ClearPageReserved(virt_to_page(addr)); - init_page_count(virt_to_page(addr)); - free_page(addr); - totalram_pages++; - } - printk(KERN_INFO "Freeing %s: %ldk freed\n", what, (end - begin) >> 10); + snprintf(buf, sizeof(buf) - 1, "%uK DMA", DMA_UNCACHED_REGION >> 10); + mem_init_print_info(buf); } #ifdef CONFIG_BLK_DEV_INITRD void __init free_initrd_mem(unsigned long start, unsigned long end) { #ifndef CONFIG_MPU - free_init_pages("initrd memory", start, end); + free_reserved_area((void *)start, (void *)end, -1, "initrd"); #endif } #endif @@ -154,10 +115,7 @@ void __init free_initrd_mem(unsigned long start, unsigned long end) void __init_refok free_initmem(void) { #if defined CONFIG_RAMKERNEL && !defined CONFIG_MPU - free_init_pages("unused kernel memory", - (unsigned long)(&__init_begin), - (unsigned long)(&__init_end)); - + free_initmem_default(-1); if (memory_start == (unsigned long)(&__init_end)) memory_start = (unsigned long)(&__init_begin); #endif diff --git a/arch/blackfin/mm/sram-alloc.c b/arch/blackfin/mm/sram-alloc.c index 342e378da1e..1f3b3ef3e10 100644 --- a/arch/blackfin/mm/sram-alloc.c +++ b/arch/blackfin/mm/sram-alloc.c @@ -191,7 +191,7 @@ static irqreturn_t l2_ecc_err(int irq, void *dev_id) { int status; - printk(KERN_ERR "L2 ecc error happend\n"); + printk(KERN_ERR "L2 ecc error happened\n"); status = bfin_read32(L2CTL0_STAT); if (status & 0x1) printk(KERN_ERR "Core channel error type:0x%x, addr:0x%x\n", |