diff options
Diffstat (limited to 'arch/blackfin')
260 files changed, 20954 insertions, 5618 deletions
diff --git a/arch/blackfin/ADI_BSD.txt b/arch/blackfin/ADI_BSD.txt deleted file mode 100644 index 501d0b64594..00000000000 --- a/arch/blackfin/ADI_BSD.txt +++ /dev/null @@ -1,41 +0,0 @@ -This BSD-Style License applies to a few files in ./arch/blackfin directory, -and is included here, so people understand which code they can use outside -the Linux kernel, in non-GPL based projects. - -Using the files released under the "ADI BSD" license, must comply with -these license terms. - --------------------------------------------------------------------------- - -Copyright Analog Devices, Inc. - -All rights reserved. - -Redistribution and use in source and binary forms, with or without -modification, are permitted provided that the following conditions -are met: - - Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - - Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - - Neither the name of Analog Devices, Inc. nor the names of its - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - - The use of this software may or may not infringe the patent rights - of one or more patent holders. This license does not release you - from the requirement that you obtain separate licenses from these - patent holders to use this software. - -THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR -IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, -INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -BUT NOT LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF -SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR -BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR -OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF -ADVISED OF THE POSSIBILITY OF SUCH DAMAGE diff --git a/arch/blackfin/Clear_BSD.txt b/arch/blackfin/Clear_BSD.txt new file mode 100644 index 00000000000..bfa4b378a36 --- /dev/null +++ b/arch/blackfin/Clear_BSD.txt @@ -0,0 +1,33 @@ +The Clear BSD license: + +Copyright (c) 2012, Analog Devices, Inc. All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted (subject to the limitations in the +disclaimer below) provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + +* Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the + distribution. + +* Neither the name of Analog Devices, Inc. nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + +NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE +GRANTED BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT +HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED +WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR +BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE +OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN +IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index abe5a9e8514..f81e7b989ff 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -1,7 +1,3 @@ -config SYMBOL_PREFIX - string - default "_" - config MMU def_bool n @@ -24,18 +20,27 @@ config BLACKFIN select HAVE_FUNCTION_TRACER select HAVE_FUNCTION_TRACE_MCOUNT_TEST select HAVE_IDE - select HAVE_IRQ_WORK select HAVE_KERNEL_GZIP if RAMKERNEL select HAVE_KERNEL_BZIP2 if RAMKERNEL select HAVE_KERNEL_LZMA if RAMKERNEL select HAVE_KERNEL_LZO if RAMKERNEL select HAVE_OPROFILE select HAVE_PERF_EVENTS - select ARCH_WANT_OPTIONAL_GPIOLIB - select HAVE_GENERIC_HARDIRQS + select ARCH_HAVE_CUSTOM_GPIO_H + select ARCH_REQUIRE_GPIOLIB + select HAVE_UID16 + select HAVE_UNDERSCORE_SYMBOL_PREFIX + select VIRT_TO_BUS + select ARCH_WANT_IPC_PARSE_VERSION select GENERIC_ATOMIC64 select GENERIC_IRQ_PROBE - select IRQ_PER_CPU if SMP + select GENERIC_IRQ_SHOW + select HAVE_NMI_WATCHDOG if NMI_WATCHDOG + select GENERIC_SMP_IDLE_THREAD + select ARCH_USES_GETTIMEOFFSET if !GENERIC_CLOCKEVENTS + select HAVE_MOD_ARCH_SPECIFIC + select MODULES_USE_ELF_RELA + select HAVE_DEBUG_STACKOVERFLOW config GENERIC_CSUM def_bool y @@ -47,9 +52,6 @@ config GENERIC_BUG config ZONE_DMA def_bool y -config GENERIC_GPIO - def_bool y - config FORCE_MAX_ZONEORDER int default "14" @@ -225,6 +227,12 @@ config BF561 help BF561 Processor Support. +config BF609 + bool "BF609" + select CLKDEV_LOOKUP + help + BF609 Processor Support. + endchoice config SMP @@ -245,36 +253,36 @@ config NR_CPUS config HOTPLUG_CPU bool "Support for hot-pluggable CPUs" - depends on SMP && HOTPLUG + depends on SMP default y config BF_REV_MIN int - default 0 if (BF51x || BF52x || (BF54x && !BF54xM)) + default 0 if (BF51x || BF52x || (BF54x && !BF54xM)) || BF60x default 2 if (BF537 || BF536 || BF534) default 3 if (BF561 || BF533 || BF532 || BF531 || BF54xM) default 4 if (BF538 || BF539) config BF_REV_MAX int - default 2 if (BF51x || BF52x || (BF54x && !BF54xM)) + default 2 if (BF51x || BF52x || (BF54x && !BF54xM)) || BF60x default 3 if (BF537 || BF536 || BF534 || BF54xM) default 5 if (BF561 || BF538 || BF539) default 6 if (BF533 || BF532 || BF531) choice prompt "Silicon Rev" - default BF_REV_0_0 if (BF51x || BF52x) + default BF_REV_0_0 if (BF51x || BF52x || BF60x) default BF_REV_0_2 if (BF534 || BF536 || BF537 || (BF54x && !BF54xM)) default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF54xM || BF561) config BF_REV_0_0 bool "0.0" - depends on (BF51x || BF52x || (BF54x && !BF54xM)) + depends on (BF51x || BF52x || (BF54x && !BF54xM) || BF60x) config BF_REV_0_1 bool "0.1" - depends on (BF51x || BF52x || (BF54x && !BF54xM)) + depends on (BF51x || BF52x || (BF54x && !BF54xM) || BF60x) config BF_REV_0_2 bool "0.2" @@ -286,7 +294,7 @@ config BF_REV_0_3 config BF_REV_0_4 bool "0.4" - depends on (BF561 || BF533 || BF532 || BF531 || BF538 || BF539) + depends on (BF561 || BF533 || BF532 || BF531 || BF538 || BF539 || BF54x) config BF_REV_0_5 bool "0.5" @@ -309,6 +317,14 @@ config BF53x depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537) default y +config GPIO_ADI + def_bool y + depends on (BF51x || BF52x || BF53x || BF538 || BF539 || BF561) + +config PINCTRL + def_bool y + depends on BF54x || BF60x + config MEM_MT48LC64M4A2FB_7E bool depends on (BFIN533_STAMP) @@ -342,6 +358,11 @@ config MEM_MT48H32M16LFCJ_75 depends on (BFIN526_EZBRD) default y +config MEM_MT47H64M16 + bool + depends on (BFIN609_EZKIT) + default y + source "arch/blackfin/mach-bf518/Kconfig" source "arch/blackfin/mach-bf527/Kconfig" source "arch/blackfin/mach-bf533/Kconfig" @@ -349,6 +370,7 @@ source "arch/blackfin/mach-bf561/Kconfig" source "arch/blackfin/mach-bf537/Kconfig" source "arch/blackfin/mach-bf538/Kconfig" source "arch/blackfin/mach-bf548/Kconfig" +source "arch/blackfin/mach-bf609/Kconfig" menu "Board customizations" @@ -378,12 +400,19 @@ config BOOT_LOAD memory region is used to capture NULL pointer references as well as some core kernel functions. +config PHY_RAM_BASE_ADDRESS + hex "Physical RAM Base" + default 0x0 + help + set BF609 FPGA physical SRAM base address + config ROM_BASE hex "Kernel ROM Base" depends on ROMKERNEL default "0x20040040" - range 0x20000000 0x20400000 if !(BF54x || BF561) + range 0x20000000 0x20400000 if !(BF54x || BF561 || BF60x) range 0x20000000 0x30000000 if (BF54x || BF561) + range 0xB0000000 0xC0000000 if (BF60x) help Make sure your ROM base does not include any file-header information that is prepended to the kernel. @@ -421,7 +450,7 @@ config BFIN_KERNEL_CLOCK config PLL_BYPASS bool "Bypass PLL" - depends on BFIN_KERNEL_CLOCK + depends on BFIN_KERNEL_CLOCK && (!BF60x) default n config CLKIN_HALF @@ -440,7 +469,7 @@ config VCO_MULT default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN527_EZKIT_V2 || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM || BFIN538_EZKIT) default "22" if BFIN533_BLUETECHNIX_CM default "20" if (BFIN537_BLUETECHNIX_CM_E || BFIN537_BLUETECHNIX_CM_U || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM) - default "20" if BFIN561_EZKIT + default "20" if (BFIN561_EZKIT || BF609) default "16" if (H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD || BFIN518F_EZBRD) default "25" if BFIN527_AD7160EVAL help @@ -472,12 +501,45 @@ config SCLK_DIV int "System Clock Divider" depends on BFIN_KERNEL_CLOCK range 1 15 - default 5 + default 4 help - This sets the frequency of the system clock (including SDRAM or DDR). + This sets the frequency of the system clock (including SDRAM or DDR) on + !BF60x else it set the clock for system buses and provides the + source from which SCLK0 and SCLK1 are derived. This can be between 1 and 15 System Clock = (PLL frequency) / (this setting) +config SCLK0_DIV + int "System Clock0 Divider" + depends on BFIN_KERNEL_CLOCK && BF60x + range 1 15 + default 1 + help + This sets the frequency of the system clock0 for PVP and all other + peripherals not clocked by SCLK1. + This can be between 1 and 15 + System Clock0 = (System Clock) / (this setting) + +config SCLK1_DIV + int "System Clock1 Divider" + depends on BFIN_KERNEL_CLOCK && BF60x + range 1 15 + default 1 + help + This sets the frequency of the system clock1 (including SPORT, SPI and ACM). + This can be between 1 and 15 + System Clock1 = (System Clock) / (this setting) + +config DCLK_DIV + int "DDR Clock Divider" + depends on BFIN_KERNEL_CLOCK && BF60x + range 1 15 + default 2 + help + This sets the frequency of the DDR memory. + This can be between 1 and 15 + DDR Clock = (PLL frequency) / (this setting) + choice prompt "DDR SDRAM Chip Type" depends on BFIN_KERNEL_CLOCK @@ -493,7 +555,7 @@ endchoice choice prompt "DDR/SDRAM Timing" - depends on BFIN_KERNEL_CLOCK + depends on BFIN_KERNEL_CLOCK && !BF60x default BFIN_KERNEL_CLOCK_MEMINIT_CALC help This option allows you to specify Blackfin SDRAM/DDR Timing parameters @@ -501,8 +563,7 @@ choice accurate - This option is therefore marked experimental. config BFIN_KERNEL_CLOCK_MEMINIT_CALC - bool "Calculate Timings (EXPERIMENTAL)" - depends on EXPERIMENTAL + bool "Calculate Timings" config BFIN_KERNEL_CLOCK_MEMINIT_SPEC bool "Provide accurate Timings based on target SCLK" @@ -575,6 +636,7 @@ config MAX_VCO_HZ default 600000000 if BF548 default 533333333 if BF549 default 600000000 if BF561 + default 800000000 if BF609 config MIN_VCO_HZ int @@ -582,6 +644,7 @@ config MIN_VCO_HZ config MAX_SCLK_HZ int + default 200000000 if BF609 default 133333333 config MIN_SCLK_HZ @@ -592,9 +655,10 @@ comment "Kernel Timer/Scheduler" source kernel/Kconfig.hz -config GENERIC_CLOCKEVENTS +config SET_GENERIC_CLOCKEVENTS bool "Generic clock events" default y + select GENERIC_CLOCKEVENTS menu "Clock event device" depends on GENERIC_CLOCKEVENTS @@ -628,12 +692,6 @@ config GPTMR0_CLOCKSOURCE depends on !TICKSOURCE_GPTMR0 endmenu -config ARCH_USES_GETTIMEOFFSET - depends on !GENERIC_CLOCKEVENTS - def_bool y - -source kernel/time/Kconfig - comment "Misc" choice @@ -810,19 +868,11 @@ config SYS_BFIN_SPINLOCK_L1 If enabled, sys_bfin_spinlock function is linked into L1 instruction memory. (less latency) -config IP_CHECKSUM_L1 - bool "Locate IP Checksum function in L1 Memory" - default n - depends on !SMP - help - If enabled, the IP Checksum function is linked - into L1 instruction memory. (less latency) - config CACHELINE_ALIGNED_L1 bool "Locate cacheline_aligned data to L1 Data Memory" default y if !BF54x default n if BF54x - depends on !SMP && !BF531 + depends on !SMP && !BF531 && !CRC32 help If enabled, cacheline_aligned data is linked into L1 data memory. (less latency) @@ -949,19 +999,15 @@ config BFIN_GPTIMERS To compile this driver as a module, choose M here: the module will be called gptimers. -config HAVE_PWM - tristate "Enable PWM API support" - depends on BFIN_GPTIMERS - help - Enable support for the Pulse Width Modulation framework (as - found in linux/pwm.h). - - To compile this driver as a module, choose M here: the module - will be called pwm. - choice prompt "Uncached DMA region" default DMA_UNCACHED_1M +config DMA_UNCACHED_32M + bool "Enable 32M DMA region" +config DMA_UNCACHED_16M + bool "Enable 16M DMA region" +config DMA_UNCACHED_8M + bool "Enable 8M DMA region" config DMA_UNCACHED_4M bool "Enable 4M DMA region" config DMA_UNCACHED_2M @@ -991,7 +1037,7 @@ config BFIN_EXTMEM_ICACHEABLE config BFIN_L2_ICACHEABLE bool "Enable ICACHE for L2 SRAM" depends on BFIN_ICACHE - depends on BF54x || BF561 + depends on (BF54x || BF561 || BF60x) && !SMP default n config BFIN_DCACHE @@ -1050,7 +1096,7 @@ endchoice config BFIN_L2_DCACHEABLE bool "Enable DCACHE for L2 SRAM" depends on BFIN_DCACHE - depends on (BF54x || BF561) && !SMP + depends on (BF54x || BF561 || BF60x) && !SMP default n choice prompt "L2 SRAM DCACHE policy" @@ -1066,7 +1112,7 @@ endchoice comment "Memory Protection Unit" config MPU - bool "Enable the memory protection unit (EXPERIMENTAL)" + bool "Enable the memory protection unit" default n help Use the processor's MPU to protect applications from accessing @@ -1076,6 +1122,7 @@ config MPU comment "Asynchronous Memory Configuration" menu "EBIU_AMGCTL Global Control" + depends on !BF60x config C_AMCKEN bool "Enable CLKOUT" default y @@ -1126,6 +1173,7 @@ endchoice endmenu menu "EBIU_AMBCTL Control" + depends on !BF60x config BANK_0 hex "Bank 0 (AMBCTL0.L)" default 0x7BB0 @@ -1205,7 +1253,7 @@ config ARCH_SUSPEND_POSSIBLE choice prompt "Standby Power Saving Mode" - depends on PM + depends on PM && !BF60x default PM_BFIN_SLEEP_DEEPER config PM_BFIN_SLEEP_DEEPER bool "Sleep Deeper" @@ -1257,9 +1305,121 @@ config PM_BFIN_WAKE_GP (all processors, except ADSP-BF549). This option sets the general-purpose wake-up enable (GPWE) control bit to enable wake-up upon detection of an active low signal on the /GPW (PH7) pin. - On ADSP-BF549 this option enables the the same functionality on the + On ADSP-BF549 this option enables the same functionality on the /MRXON pin also PH7. +config PM_BFIN_WAKE_PA15 + bool "Allow Wake-Up from PA15" + depends on PM && BF60x + default n + help + Enable PA15 Wake-Up + +config PM_BFIN_WAKE_PA15_POL + int "Wake-up priority" + depends on PM_BFIN_WAKE_PA15 + default 0 + help + Wake-Up priority 0(low) 1(high) + +config PM_BFIN_WAKE_PB15 + bool "Allow Wake-Up from PB15" + depends on PM && BF60x + default n + help + Enable PB15 Wake-Up + +config PM_BFIN_WAKE_PB15_POL + int "Wake-up priority" + depends on PM_BFIN_WAKE_PB15 + default 0 + help + Wake-Up priority 0(low) 1(high) + +config PM_BFIN_WAKE_PC15 + bool "Allow Wake-Up from PC15" + depends on PM && BF60x + default n + help + Enable PC15 Wake-Up + +config PM_BFIN_WAKE_PC15_POL + int "Wake-up priority" + depends on PM_BFIN_WAKE_PC15 + default 0 + help + Wake-Up priority 0(low) 1(high) + +config PM_BFIN_WAKE_PD06 + bool "Allow Wake-Up from PD06(ETH0_PHYINT)" + depends on PM && BF60x + default n + help + Enable PD06(ETH0_PHYINT) Wake-up + +config PM_BFIN_WAKE_PD06_POL + int "Wake-up priority" + depends on PM_BFIN_WAKE_PD06 + default 0 + help + Wake-Up priority 0(low) 1(high) + +config PM_BFIN_WAKE_PE12 + bool "Allow Wake-Up from PE12(ETH1_PHYINT, PUSH BUTTON)" + depends on PM && BF60x + default n + help + Enable PE12(ETH1_PHYINT, PUSH BUTTON) Wake-up + +config PM_BFIN_WAKE_PE12_POL + int "Wake-up priority" + depends on PM_BFIN_WAKE_PE12 + default 0 + help + Wake-Up priority 0(low) 1(high) + +config PM_BFIN_WAKE_PG04 + bool "Allow Wake-Up from PG04(CAN0_RX)" + depends on PM && BF60x + default n + help + Enable PG04(CAN0_RX) Wake-up + +config PM_BFIN_WAKE_PG04_POL + int "Wake-up priority" + depends on PM_BFIN_WAKE_PG04 + default 0 + help + Wake-Up priority 0(low) 1(high) + +config PM_BFIN_WAKE_PG13 + bool "Allow Wake-Up from PG13" + depends on PM && BF60x + default n + help + Enable PG13 Wake-Up + +config PM_BFIN_WAKE_PG13_POL + int "Wake-up priority" + depends on PM_BFIN_WAKE_PG13 + default 0 + help + Wake-Up priority 0(low) 1(high) + +config PM_BFIN_WAKE_USB + bool "Allow Wake-Up from (USB)" + depends on PM && BF60x + default n + help + Enable (USB) Wake-up + +config PM_BFIN_WAKE_USB_POL + int "Wake-up priority" + depends on PM_BFIN_WAKE_USB + default 0 + help + Wake-Up priority 0(low) 1(high) + endmenu menu "CPU Frequency scaling" @@ -1269,12 +1429,10 @@ source "drivers/cpufreq/Kconfig" config BFIN_CPU_FREQ bool depends on CPU_FREQ - select CPU_FREQ_TABLE default y config CPU_VOLTAGE bool "CPU Voltage scaling" - depends on EXPERIMENTAL depends on CPU_FREQ default n help diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug index e2a3d4c8ab9..f3337ee0362 100644 --- a/arch/blackfin/Kconfig.debug +++ b/arch/blackfin/Kconfig.debug @@ -2,13 +2,6 @@ menu "Kernel hacking" source "lib/Kconfig.debug" -config DEBUG_STACKOVERFLOW - bool "Check for stack overflows" - depends on DEBUG_KERNEL - help - This option will cause messages to be printed if free stack space - drops below a certain limit. - config DEBUG_VERBOSE bool "Verbose fault messages" default y @@ -253,4 +246,11 @@ config BFIN_PSEUDODBG_INSNS Most people should say N here. +config BFIN_PM_WAKEUP_TIME_BENCH + bool "Display the total time for kernel to resume from power saving mode" + default n + help + Display the total time when kernel resumes normal from standby or + suspend to mem mode. + endmenu diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile index 46f42b2066e..1fce08632ad 100644 --- a/arch/blackfin/Makefile +++ b/arch/blackfin/Makefile @@ -20,7 +20,6 @@ endif KBUILD_AFLAGS += $(call cc-option,-mno-fdpic) KBUILD_CFLAGS_MODULE += -mlong-calls LDFLAGS += -m elf32bfin -KALLSYMS += --symbol-prefix=_ KBUILD_DEFCONFIG := BF537-STAMP_defconfig @@ -54,6 +53,7 @@ machine-$(CONFIG_BF548M) := bf548 machine-$(CONFIG_BF549) := bf548 machine-$(CONFIG_BF549M) := bf548 machine-$(CONFIG_BF561) := bf561 +machine-$(CONFIG_BF609) := bf609 MACHINE := $(machine-y) export MACHINE @@ -86,6 +86,7 @@ cpu-$(CONFIG_BF548M) := bf548m cpu-$(CONFIG_BF549) := bf549 cpu-$(CONFIG_BF549M) := bf549m cpu-$(CONFIG_BF561) := bf561 +cpu-$(CONFIG_BF609) := bf609 rev-$(CONFIG_BF_REV_0_0) := 0.0 rev-$(CONFIG_BF_REV_0_1) := 0.1 @@ -107,8 +108,6 @@ KBUILD_AFLAGS += -mcpu=$(CPU_REV) CHECKFLAGS_SILICON = $(shell echo "" | $(CPP) $(KBUILD_CFLAGS) -dD - 2>/dev/null | awk '$$2 == "__SILICON_REVISION__" { print $$3 }') CHECKFLAGS += -D__SILICON_REVISION__=$(CHECKFLAGS_SILICON) -D__bfin__ -head-y := arch/$(ARCH)/kernel/init_task.o - core-y += arch/$(ARCH)/kernel/ arch/$(ARCH)/mm/ arch/$(ARCH)/mach-common/ # If we have a machine-specific directory, then include it in the build. @@ -142,11 +141,11 @@ archclean: INSTALL_PATH ?= /tftpboot boot := arch/$(ARCH)/boot -BOOT_TARGETS = vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma vmImage.lzo vmImage.xip +BOOT_TARGETS = uImage uImage.bin uImage.bz2 uImage.gz uImage.lzma uImage.lzo uImage.xip PHONY += $(BOOT_TARGETS) install -KBUILD_IMAGE := $(boot)/vmImage +KBUILD_IMAGE := $(boot)/uImage -all: vmImage +all: uImage $(BOOT_TARGETS): vmlinux $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ diff --git a/arch/blackfin/boot/.gitignore b/arch/blackfin/boot/.gitignore index 229e5080867..1287a5487e7 100644 --- a/arch/blackfin/boot/.gitignore +++ b/arch/blackfin/boot/.gitignore @@ -1,2 +1,3 @@ vmImage* vmlinux* +uImage* diff --git a/arch/blackfin/boot/Makefile b/arch/blackfin/boot/Makefile index 0a49279e342..3efaa094fb9 100644 --- a/arch/blackfin/boot/Makefile +++ b/arch/blackfin/boot/Makefile @@ -6,20 +6,17 @@ # for more details. # -MKIMAGE := $(srctree)/scripts/mkuboot.sh - -targets := vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma vmImage.lzo vmImage.xip +targets := uImage uImage.bin uImage.bz2 uImage.gz uImage.lzma uImage.lzo uImage.xip extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.lzo vmlinux.bin.xip -UIMAGE_OPTS-y := -UIMAGE_OPTS-$(CONFIG_RAMKERNEL) += -a $(CONFIG_BOOT_LOAD) -UIMAGE_OPTS-$(CONFIG_ROMKERNEL) += -a $(CONFIG_ROM_BASE) -x - -quiet_cmd_uimage = UIMAGE $@ - cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(ARCH) -O linux -T kernel \ - -C $(2) -n '$(CPU_REV)-$(KERNELRELEASE)' \ - -e $(shell $(NM) vmlinux | awk '$$NF == "__start" {print $$1}') \ - $(UIMAGE_OPTS-y) -d $< $@ +ifeq ($(CONFIG_RAMKERNEL),y) +UIMAGE_LOADADDR = $(CONFIG_BOOT_LOAD) +else # CONFIG_ROMKERNEL must be set +UIMAGE_LOADADDR = $(CONFIG_ROM_BASE) +endif +UIMAGE_ENTRYADDR = $(shell $(NM) vmlinux | awk '$$NF == "__start" {print $$1}') +UIMAGE_NAME = '$(CPU_REV)-$(KERNELRELEASE)' +UIMAGE_OPTS-$(CONFIG_ROMKERNEL) += -x $(obj)/vmlinux.bin: vmlinux FORCE $(call if_changed,objcopy) @@ -42,22 +39,22 @@ quiet_cmd_mk_bin_xip = BIN $@ $(obj)/vmlinux.bin.xip: $(obj)/vmlinux.bin FORCE $(call if_changed,mk_bin_xip) -$(obj)/vmImage.bin: $(obj)/vmlinux.bin +$(obj)/uImage.bin: $(obj)/vmlinux.bin $(call if_changed,uimage,none) -$(obj)/vmImage.bz2: $(obj)/vmlinux.bin.bz2 +$(obj)/uImage.bz2: $(obj)/vmlinux.bin.bz2 $(call if_changed,uimage,bzip2) -$(obj)/vmImage.gz: $(obj)/vmlinux.bin.gz +$(obj)/uImage.gz: $(obj)/vmlinux.bin.gz $(call if_changed,uimage,gzip) -$(obj)/vmImage.lzma: $(obj)/vmlinux.bin.lzma +$(obj)/uImage.lzma: $(obj)/vmlinux.bin.lzma $(call if_changed,uimage,lzma) -$(obj)/vmImage.lzo: $(obj)/vmlinux.bin.lzo +$(obj)/uImage.lzo: $(obj)/vmlinux.bin.lzo $(call if_changed,uimage,lzo) -$(obj)/vmImage.xip: $(obj)/vmlinux.bin.xip +$(obj)/uImage.xip: $(obj)/vmlinux.bin.xip $(call if_changed,uimage,none) suffix-y := bin @@ -67,7 +64,7 @@ suffix-$(CONFIG_KERNEL_LZMA) := lzma suffix-$(CONFIG_KERNEL_LZO) := lzo suffix-$(CONFIG_ROMKERNEL) := xip -$(obj)/vmImage: $(obj)/vmImage.$(suffix-y) +$(obj)/uImage: $(obj)/uImage.$(suffix-y) @ln -sf $(notdir $<) $@ install: diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig index 0b7039cf07f..383007877b2 100644 --- a/arch/blackfin/configs/BF518F-EZBRD_defconfig +++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig @@ -4,9 +4,7 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EXPERT=y -# CONFIG_SYSCTL_SYSCALL is not set # CONFIG_ELF_CORE is not set # CONFIG_FUTEX is not set # CONFIG_SIGNALFD is not set @@ -35,7 +33,6 @@ CONFIG_C_CDPRIO=y CONFIG_BANK_3=0x99B2 CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y -CONFIG_PM=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -51,7 +48,6 @@ CONFIG_IP_PNP=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_JEDECPROBE=m @@ -60,20 +56,28 @@ CONFIG_MTD_ROM=m CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_BLK_DEV_RAM=y CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y +CONFIG_NET_BFIN=y CONFIG_BFIN_MAC=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_WLAN is not set # CONFIG_INPUT is not set # CONFIG_SERIO is not set # CONFIG_VT is not set -# CONFIG_DEVKMEM is not set +# CONFIG_LEGACY_PTYS is not set CONFIG_BFIN_JTAG_COMM=m +# CONFIG_DEVKMEM is not set CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y CONFIG_SERIAL_BFIN_UART0=y -# CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set CONFIG_I2C=y CONFIG_I2C_CHARDEV=y @@ -97,16 +101,13 @@ CONFIG_EXT2_FS=m CONFIG_VFAT_FS=m CONFIG_NFS_FS=m CONFIG_NFS_V3=y -CONFIG_SMB_FS=m CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_CODEPAGE_936=m CONFIG_NLS_ISO8859_1=m CONFIG_NLS_UTF8=m -CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_FTRACE is not set CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HWERR=y diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig index 5553205d7cb..e66ba31ef84 100644 --- a/arch/blackfin/configs/BF526-EZBRD_defconfig +++ b/arch/blackfin/configs/BF526-EZBRD_defconfig @@ -4,9 +4,7 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EXPERT=y -# CONFIG_SYSCTL_SYSCALL is not set # CONFIG_ELF_CORE is not set # CONFIG_FUTEX is not set # CONFIG_SIGNALFD is not set @@ -40,7 +38,6 @@ CONFIG_C_CDPRIO=y CONFIG_BANK_3=0x99B2 CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y -CONFIG_PM=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -56,8 +53,6 @@ CONFIG_IP_PNP=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y @@ -67,6 +62,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=m +CONFIG_MTD_SPI_NOR=y CONFIG_BLK_DEV_RAM=y CONFIG_SCSI=y # CONFIG_SCSI_PROC_FS is not set @@ -74,10 +70,18 @@ CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=m # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y +CONFIG_NET_BFIN=y CONFIG_BFIN_MAC=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_WLAN is not set CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_MOUSEDEV is not set @@ -85,12 +89,12 @@ CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_MISC=y # CONFIG_SERIO is not set -# CONFIG_DEVKMEM is not set +# CONFIG_LEGACY_PTYS is not set CONFIG_BFIN_JTAG_COMM=m +# CONFIG_DEVKMEM is not set CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y CONFIG_SERIAL_BFIN_UART1=y -# CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set CONFIG_I2C=y CONFIG_I2C_CHARDEV=m @@ -119,11 +123,9 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OTG_BLACKLIST_HUB=y CONFIG_USB_MON=y -CONFIG_USB_MUSB_HDRC=y CONFIG_USB_STORAGE=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_BFIN=y @@ -135,16 +137,13 @@ CONFIG_VFAT_FS=m CONFIG_JFFS2_FS=m CONFIG_NFS_FS=m CONFIG_NFS_V3=y -CONFIG_SMB_FS=m CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_CODEPAGE_936=m CONFIG_NLS_ISO8859_1=m CONFIG_NLS_UTF8=m -CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_FTRACE is not set CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HWERR=y diff --git a/arch/blackfin/configs/BF527-EZKIT-V2_defconfig b/arch/blackfin/configs/BF527-EZKIT-V2_defconfig index 498f64a8705..0207c588c19 100644 --- a/arch/blackfin/configs/BF527-EZKIT-V2_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT-V2_defconfig @@ -4,9 +4,7 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EXPERT=y -# CONFIG_SYSCTL_SYSCALL is not set # CONFIG_ELF_CORE is not set # CONFIG_FUTEX is not set # CONFIG_SIGNALFD is not set @@ -39,7 +37,6 @@ CONFIG_C_CDPRIO=y CONFIG_BANK_3=0x99B2 CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y -CONFIG_PM=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -61,8 +58,6 @@ CONFIG_BFIN_SIR0=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=m CONFIG_MTD_BLOCK=y CONFIG_MTD_JEDECPROBE=m CONFIG_MTD_RAM=y @@ -70,6 +65,7 @@ CONFIG_MTD_ROM=m CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=m +CONFIG_MTD_SPI_NOR=y CONFIG_BLK_DEV_RAM=y CONFIG_SCSI=y # CONFIG_SCSI_PROC_FS is not set @@ -77,10 +73,18 @@ CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=m # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y +CONFIG_NET_BFIN=y CONFIG_BFIN_MAC=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_WLAN is not set CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_MOUSEDEV is not set @@ -93,12 +97,12 @@ CONFIG_TOUCHSCREEN_AD7879=y CONFIG_TOUCHSCREEN_AD7879_I2C=y CONFIG_INPUT_MISC=y # CONFIG_SERIO is not set -# CONFIG_DEVKMEM is not set +# CONFIG_LEGACY_PTYS is not set CONFIG_BFIN_JTAG_COMM=m +# CONFIG_DEVKMEM is not set CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y CONFIG_SERIAL_BFIN_UART1=y -# CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set CONFIG_I2C=y CONFIG_I2C_CHARDEV=m @@ -143,12 +147,13 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OTG_BLACKLIST_HUB=y CONFIG_USB_MON=y CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_BLACKFIN=y CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_ADP5520=y @@ -163,16 +168,13 @@ CONFIG_VFAT_FS=m CONFIG_JFFS2_FS=m CONFIG_NFS_FS=m CONFIG_NFS_V3=y -CONFIG_SMB_FS=m CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_CODEPAGE_936=m CONFIG_NLS_ISO8859_1=m CONFIG_NLS_UTF8=m -CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_FTRACE is not set CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HWERR=y diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig index 72e0317565e..99c131ba7d9 100644 --- a/arch/blackfin/configs/BF527-EZKIT_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT_defconfig @@ -4,9 +4,7 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EXPERT=y -# CONFIG_SYSCTL_SYSCALL is not set # CONFIG_ELF_CORE is not set # CONFIG_FUTEX is not set # CONFIG_SIGNALFD is not set @@ -38,7 +36,6 @@ CONFIG_C_CDPRIO=y CONFIG_BANK_3=0x99B2 CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y -CONFIG_PM=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -60,8 +57,6 @@ CONFIG_BFIN_SIR0=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=m CONFIG_MTD_BLOCK=y CONFIG_MTD_JEDECPROBE=m CONFIG_MTD_RAM=y @@ -69,6 +64,7 @@ CONFIG_MTD_ROM=m CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=m +CONFIG_MTD_SPI_NOR=y CONFIG_BLK_DEV_RAM=y CONFIG_SCSI=y # CONFIG_SCSI_PROC_FS is not set @@ -76,10 +72,18 @@ CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=m # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y +CONFIG_NET_BFIN=y CONFIG_BFIN_MAC=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_WLAN is not set CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_MOUSEDEV is not set @@ -87,12 +91,12 @@ CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_MISC=y # CONFIG_SERIO is not set -# CONFIG_DEVKMEM is not set +# CONFIG_LEGACY_PTYS is not set CONFIG_BFIN_JTAG_COMM=m +# CONFIG_DEVKMEM is not set CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y CONFIG_SERIAL_BFIN_UART1=y -# CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set CONFIG_I2C=y CONFIG_I2C_CHARDEV=m @@ -137,13 +141,15 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OTG_BLACKLIST_HUB=y CONFIG_USB_MON=y CONFIG_USB_MUSB_HDRC=y CONFIG_MUSB_PIO_ONLY=y +CONFIG_USB_MUSB_BLACKFIN=y +CONFIG_MUSB_PIO_ONLY=y CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_BFIN=y CONFIG_EXT2_FS=m @@ -155,16 +161,13 @@ CONFIG_VFAT_FS=m CONFIG_JFFS2_FS=m CONFIG_NFS_FS=m CONFIG_NFS_V3=y -CONFIG_SMB_FS=m CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_CODEPAGE_936=m CONFIG_NLS_ISO8859_1=m CONFIG_NLS_UTF8=m -CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_FTRACE is not set CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HWERR=y diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig index 2f075e0b262..16273a92205 100644 --- a/arch/blackfin/configs/BF533-EZKIT_defconfig +++ b/arch/blackfin/configs/BF533-EZKIT_defconfig @@ -4,9 +4,7 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EXPERT=y -# CONFIG_SYSCTL_SYSCALL is not set # CONFIG_ELF_CORE is not set # CONFIG_FUTEX is not set # CONFIG_SIGNALFD is not set @@ -32,7 +30,6 @@ CONFIG_C_CDPRIO=y CONFIG_BANK_3=0xAAC2 CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y -CONFIG_PM=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -53,19 +50,27 @@ CONFIG_IRTTY_SIR=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CHAR=m CONFIG_MTD_BLOCK=y -CONFIG_MTD_JEDECPROBE=m +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_RAM=y -CONFIG_MTD_ROM=m +CONFIG_MTD_ROM=y CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PLATRAM=y CONFIG_BLK_DEV_RAM=y CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set CONFIG_SMC91X=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_WLAN is not set CONFIG_INPUT=m # CONFIG_INPUT_MOUSEDEV is not set @@ -74,11 +79,11 @@ CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set # CONFIG_VT is not set -# CONFIG_DEVKMEM is not set +# CONFIG_LEGACY_PTYS is not set CONFIG_BFIN_JTAG_COMM=m +# CONFIG_DEVKMEM is not set CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set CONFIG_SPI=y CONFIG_SPI_BFIN5XX=y @@ -94,12 +99,9 @@ CONFIG_RTC_DRV_BFIN=y CONFIG_JFFS2_FS=m CONFIG_NFS_FS=m CONFIG_NFS_V3=y -CONFIG_SMB_FS=m -CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_FTRACE is not set CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HWERR=y diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig index ab38a82597b..0df2f921f7e 100644 --- a/arch/blackfin/configs/BF533-STAMP_defconfig +++ b/arch/blackfin/configs/BF533-STAMP_defconfig @@ -4,9 +4,7 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EXPERT=y -# CONFIG_SYSCTL_SYSCALL is not set # CONFIG_ELF_CORE is not set # CONFIG_FUTEX is not set # CONFIG_SIGNALFD is not set @@ -30,7 +28,6 @@ CONFIG_C_CDPRIO=y CONFIG_BANK_3=0xAAC2 CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y -CONFIG_PM=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -62,10 +59,16 @@ CONFIG_MTD_ROM=m CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_BLK_DEV_RAM=y CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set CONFIG_SMC91X=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_WLAN is not set # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=m @@ -74,11 +77,11 @@ CONFIG_INPUT_EVDEV=m CONFIG_INPUT_MISC=y # CONFIG_SERIO is not set # CONFIG_VT is not set -# CONFIG_DEVKMEM is not set +# CONFIG_LEGACY_PTYS is not set CONFIG_BFIN_JTAG_COMM=m +# CONFIG_DEVKMEM is not set CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set CONFIG_I2C=m CONFIG_I2C_CHARDEV=m @@ -106,12 +109,9 @@ CONFIG_RTC_DRV_BFIN=y CONFIG_JFFS2_FS=m CONFIG_NFS_FS=m CONFIG_NFS_V3=y -CONFIG_SMB_FS=m -CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_FTRACE is not set CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HWERR=y diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig index 5c802d6bbbc..91d3eda4274 100644 --- a/arch/blackfin/configs/BF537-STAMP_defconfig +++ b/arch/blackfin/configs/BF537-STAMP_defconfig @@ -4,9 +4,7 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EXPERT=y -# CONFIG_SYSCTL_SYSCALL is not set # CONFIG_ELF_CORE is not set # CONFIG_FUTEX is not set # CONFIG_SIGNALFD is not set @@ -30,7 +28,6 @@ CONFIG_C_CDPRIO=y CONFIG_BANK_3=0x99B2 CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y -CONFIG_PM=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -45,7 +42,6 @@ CONFIG_IP_PNP=y CONFIG_CAN=m CONFIG_CAN_RAW=m CONFIG_CAN_BCM=m -CONFIG_CAN_DEV=m CONFIG_CAN_BFIN=m CONFIG_IRDA=m CONFIG_IRLAN=m @@ -58,7 +54,6 @@ CONFIG_BFIN_SIR1=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=m CONFIG_MTD_BLOCK=y @@ -69,11 +64,18 @@ CONFIG_MTD_ROM=m CONFIG_MTD_PHYSMAP=m CONFIG_BLK_DEV_RAM=y CONFIG_NETDEVICES=y -CONFIG_SMSC_PHY=y -CONFIG_NET_ETHERNET=y +CONFIG_NET_BFIN=y CONFIG_BFIN_MAC=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_WLAN is not set # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=m @@ -82,12 +84,12 @@ CONFIG_INPUT_EVDEV=m CONFIG_INPUT_MISC=y # CONFIG_SERIO is not set # CONFIG_VT is not set -# CONFIG_DEVKMEM is not set +# CONFIG_LEGACY_PTYS is not set CONFIG_BFIN_JTAG_COMM=m +# CONFIG_DEVKMEM is not set CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y CONFIG_SERIAL_BFIN_UART0=y -# CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set CONFIG_I2C=m CONFIG_I2C_CHARDEV=m @@ -117,12 +119,9 @@ CONFIG_RTC_DRV_BFIN=y CONFIG_JFFS2_FS=m CONFIG_NFS_FS=m CONFIG_NFS_V3=y -CONFIG_SMB_FS=m -CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_FTRACE is not set CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HWERR=y diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig index 972aa6263ad..be03be6ba54 100644 --- a/arch/blackfin/configs/BF538-EZKIT_defconfig +++ b/arch/blackfin/configs/BF538-EZKIT_defconfig @@ -59,7 +59,6 @@ CONFIG_BFIN_SIR=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=m CONFIG_MTD_BLOCK=y diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig index 7a1e3bf2b04..38cb17d218d 100644 --- a/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -5,7 +5,6 @@ CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y -# CONFIG_SYSCTL_SYSCALL is not set # CONFIG_ELF_CORE is not set # CONFIG_FUTEX is not set # CONFIG_SIGNALFD is not set @@ -65,7 +64,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_FW_LOADER=m CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y @@ -76,6 +74,7 @@ CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_BF5XX=y # CONFIG_MTD_NAND_BF5XX_HWECC is not set +CONFIG_MTD_SPI_NOR=y CONFIG_BLK_DEV_RAM=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y @@ -85,10 +84,16 @@ CONFIG_ATA=y # CONFIG_SATA_PMP is not set CONFIG_PATA_BF54X=y CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set CONFIG_SMSC911X=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_WLAN is not set CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_MOUSEDEV is not set @@ -154,13 +159,13 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OTG_BLACKLIST_HUB=y CONFIG_USB_MON=y CONFIG_USB_MUSB_HDRC=y CONFIG_USB_MUSB_BLACKFIN=y CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y CONFIG_MMC=y CONFIG_MMC_BLOCK=m CONFIG_SDH_BFIN=y @@ -187,7 +192,6 @@ CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_CODEPAGE_936=m CONFIG_NLS_ISO8859_1=m CONFIG_NLS_UTF8=m -CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y diff --git a/arch/blackfin/configs/BF561-ACVILON_defconfig b/arch/blackfin/configs/BF561-ACVILON_defconfig index 0fdc4ecaa53..802f9c42162 100644 --- a/arch/blackfin/configs/BF561-ACVILON_defconfig +++ b/arch/blackfin/configs/BF561-ACVILON_defconfig @@ -49,7 +49,6 @@ CONFIG_SYN_COOKIES=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -57,7 +56,6 @@ CONFIG_MTD_PLATRAM=y CONFIG_MTD_PHRAM=y CONFIG_MTD_BLOCK2MTD=y CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y CONFIG_MTD_NAND_PLATFORM=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y diff --git a/arch/blackfin/configs/BF561-EZKIT-SMP_defconfig b/arch/blackfin/configs/BF561-EZKIT-SMP_defconfig index 78adbbf3982..e2a2fa5935c 100644 --- a/arch/blackfin/configs/BF561-EZKIT-SMP_defconfig +++ b/arch/blackfin/configs/BF561-EZKIT-SMP_defconfig @@ -4,9 +4,7 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EXPERT=y -# CONFIG_SYSCTL_SYSCALL is not set # CONFIG_ELF_CORE is not set # CONFIG_FUTEX is not set # CONFIG_SIGNALFD is not set @@ -33,7 +31,6 @@ CONFIG_C_CDPRIO=y CONFIG_BANK_3=0xAAC2 CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y -CONFIG_PM=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -54,21 +51,26 @@ CONFIG_IRTTY_SIR=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=m +CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=m -CONFIG_MTD_CFI_AMDSTD=m +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_RAM=y CONFIG_MTD_ROM=m -CONFIG_MTD_PHYSMAP=m +CONFIG_MTD_PHYSMAP=y CONFIG_BLK_DEV_RAM=y CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set CONFIG_SMC91X=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_WLAN is not set CONFIG_INPUT=m # CONFIG_INPUT_MOUSEDEV is not set @@ -77,11 +79,11 @@ CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set # CONFIG_VT is not set -# CONFIG_DEVKMEM is not set +# CONFIG_LEGACY_PTYS is not set CONFIG_BFIN_JTAG_COMM=m +# CONFIG_DEVKMEM is not set CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set CONFIG_SPI=y CONFIG_SPI_BFIN5XX=y @@ -95,12 +97,9 @@ CONFIG_BFIN_WDT=y CONFIG_JFFS2_FS=m CONFIG_NFS_FS=m CONFIG_NFS_V3=y -CONFIG_SMB_FS=m -CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_FTRACE is not set CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HWERR=y diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig index d3cd0f561c8..680730eeaf2 100644 --- a/arch/blackfin/configs/BF561-EZKIT_defconfig +++ b/arch/blackfin/configs/BF561-EZKIT_defconfig @@ -4,9 +4,7 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EXPERT=y -# CONFIG_SYSCTL_SYSCALL is not set # CONFIG_ELF_CORE is not set # CONFIG_FUTEX is not set # CONFIG_SIGNALFD is not set @@ -35,7 +33,6 @@ CONFIG_C_CDPRIO=y CONFIG_BANK_3=0xAAC2 CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y -CONFIG_PM=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -56,7 +53,6 @@ CONFIG_IRTTY_SIR=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -67,10 +63,16 @@ CONFIG_MTD_ROM=m CONFIG_MTD_PHYSMAP=y CONFIG_BLK_DEV_RAM=y CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set CONFIG_SMC91X=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_WLAN is not set CONFIG_INPUT=m # CONFIG_INPUT_MOUSEDEV is not set @@ -79,11 +81,11 @@ CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set # CONFIG_VT is not set -# CONFIG_DEVKMEM is not set +# CONFIG_LEGACY_PTYS is not set CONFIG_BFIN_JTAG_COMM=m +# CONFIG_DEVKMEM is not set CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set CONFIG_SPI=y CONFIG_SPI_BFIN5XX=y @@ -97,12 +99,9 @@ CONFIG_BFIN_WDT=y CONFIG_JFFS2_FS=m CONFIG_NFS_FS=m CONFIG_NFS_V3=y -CONFIG_SMB_FS=m -CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_FTRACE is not set CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HWERR=y diff --git a/arch/blackfin/configs/BF609-EZKIT_defconfig b/arch/blackfin/configs/BF609-EZKIT_defconfig new file mode 100644 index 00000000000..fcec5ce7139 --- /dev/null +++ b/arch/blackfin/configs/BF609-EZKIT_defconfig @@ -0,0 +1,153 @@ +CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +CONFIG_EXPERT=y +# CONFIG_ELF_CORE is not set +# CONFIG_FUTEX is not set +# CONFIG_SIGNALFD is not set +# CONFIG_TIMERFD is not set +# CONFIG_EVENTFD is not set +# CONFIG_AIO is not set +CONFIG_SLAB=y +CONFIG_MMAP_ALLOW_UNINITIALIZED=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_PREEMPT_VOLUNTARY=y +CONFIG_BF609=y +CONFIG_PINT1_ASSIGN=0x01010000 +CONFIG_PINT2_ASSIGN=0x07000101 +CONFIG_PINT3_ASSIGN=0x02020303 +CONFIG_IP_CHECKSUM_L1=y +CONFIG_SYSCALL_TAB_L1=y +CONFIG_CPLB_SWITCH_TAB_L1=y +# CONFIG_APP_STACK_L1 is not set +# CONFIG_BFIN_INS_LOWOVERHEAD is not set +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +CONFIG_PM_BFIN_WAKE_PE12=y +CONFIG_PM_BFIN_WAKE_PE12_POL=1 +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +CONFIG_CAN=y +CONFIG_CAN_BFIN=y +CONFIG_IRDA=y +CONFIG_IRTTY_SIR=y +# CONFIG_WIRELESS is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_FW_LOADER=m +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_M25P80=y +CONFIG_MTD_SPI_NOR=y +CONFIG_MTD_UBI=m +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_NETDEVICES=y +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +CONFIG_STMMAC_ETH=y +CONFIG_STMMAC_IEEE1588=y +# CONFIG_WLAN is not set +# CONFIG_INPUT_MOUSEDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_BFIN_ROTARY=y +# CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set +CONFIG_BFIN_SIMPLE_TIMER=m +# CONFIG_BFIN_CRC is not set +CONFIG_BFIN_LINKPORT=y +# CONFIG_DEVKMEM is not set +CONFIG_SERIAL_BFIN=y +CONFIG_SERIAL_BFIN_CONSOLE=y +CONFIG_SERIAL_BFIN_UART0=y +# CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_BLACKFIN_TWI=y +CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 +CONFIG_SPI=y +CONFIG_SPI_ADI_V3=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_BFIN_WDT=y +CONFIG_SOUND=m +CONFIG_SND=m +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_SPI is not set +# CONFIG_SND_USB is not set +CONFIG_SND_SOC=m +CONFIG_USB=y +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_BLACKFIN=m +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_USB_ZERO=y +CONFIG_MMC=y +CONFIG_SDH_BFIN=y +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXT2_FS=y +# CONFIG_DNOTIFY is not set +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_JFFS2_FS=m +CONFIG_UBIFS_FS=m +CONFIG_NFS_FS=m +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_SHIRQ=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DEBUG_INFO=y +CONFIG_FRAME_POINTER=y +# CONFIG_FTRACE is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y +CONFIG_EARLY_PRINTK=y +CONFIG_CPLB_INFO=y +CONFIG_BFIN_PSEUDODBG_INSNS=y +CONFIG_CRYPTO_HMAC=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_DEV_BFIN_CRC=m diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig index 7b982d0502a..f4a9200e1ab 100644 --- a/arch/blackfin/configs/BlackStamp_defconfig +++ b/arch/blackfin/configs/BlackStamp_defconfig @@ -44,9 +44,7 @@ CONFIG_IP_PNP=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=m CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=m CONFIG_MTD_CFI_AMDSTD=m @@ -54,7 +52,7 @@ CONFIG_MTD_RAM=y CONFIG_MTD_ROM=m CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_M25P80=y -# CONFIG_M25PXX_USE_FAST_READ is not set +CONFIG_MTD_SPI_NOR=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig index c280a50e794..05108b85ab1 100644 --- a/arch/blackfin/configs/CM-BF527_defconfig +++ b/arch/blackfin/configs/CM-BF527_defconfig @@ -95,7 +95,6 @@ CONFIG_WATCHDOG=y CONFIG_BFIN_WDT=y CONFIG_USB=m CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OTG_BLACKLIST_HUB=y CONFIG_USB_MON=m @@ -106,7 +105,7 @@ CONFIG_MUSB_PIO_ONLY=y CONFIG_USB_STORAGE=m CONFIG_USB_GADGET=m CONFIG_USB_ETH=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_G_PRINTER=m CONFIG_RTC_CLASS=y diff --git a/arch/blackfin/configs/CM-BF533_defconfig b/arch/blackfin/configs/CM-BF533_defconfig index c940a1e3ab3..5e0db82b679 100644 --- a/arch/blackfin/configs/CM-BF533_defconfig +++ b/arch/blackfin/configs/CM-BF533_defconfig @@ -36,7 +36,6 @@ CONFIG_UNIX=y # CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig index 349922be01f..9ff79df6825 100644 --- a/arch/blackfin/configs/CM-BF548_defconfig +++ b/arch/blackfin/configs/CM-BF548_defconfig @@ -53,7 +53,6 @@ CONFIG_INET_XFRM_MODE_BEET=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -95,7 +94,6 @@ CONFIG_WATCHDOG=y CONFIG_BFIN_WDT=y # CONFIG_HID_SUPPORT is not set CONFIG_USB=m -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=m CONFIG_USB_MUSB_HDRC=m @@ -107,7 +105,7 @@ CONFIG_USB_ZERO=m CONFIG_USB_ETH=m # CONFIG_USB_ETH_RNDIS is not set CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_G_PRINTER=m CONFIG_MMC=m diff --git a/arch/blackfin/configs/CM-BF561_defconfig b/arch/blackfin/configs/CM-BF561_defconfig index 0456deaa2d6..d6dd98e6714 100644 --- a/arch/blackfin/configs/CM-BF561_defconfig +++ b/arch/blackfin/configs/CM-BF561_defconfig @@ -51,7 +51,6 @@ CONFIG_INET=y # CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -83,7 +82,7 @@ CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y CONFIG_USB_GADGET=m CONFIG_USB_ETH=m -CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_G_PRINTER=m CONFIG_MMC=y diff --git a/arch/blackfin/configs/DNP5370_defconfig b/arch/blackfin/configs/DNP5370_defconfig index 89162d0fff9..2b58cb22128 100644 --- a/arch/blackfin/configs/DNP5370_defconfig +++ b/arch/blackfin/configs/DNP5370_defconfig @@ -36,7 +36,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_DEBUG=y CONFIG_MTD_DEBUG_VERBOSE=1 -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_NFTL=y diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig index a26436bf50f..0ff97d8d047 100644 --- a/arch/blackfin/configs/H8606_defconfig +++ b/arch/blackfin/configs/H8606_defconfig @@ -36,14 +36,12 @@ CONFIG_IRTTY_SIR=m # CONFIG_WIRELESS is not set # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_RAM=y CONFIG_MTD_ROM=y CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_M25P80=y -# CONFIG_M25PXX_USE_FAST_READ is not set +CONFIG_MTD_SPI_NOR=y CONFIG_BLK_DEV_RAM=y CONFIG_MISC_DEVICES=y CONFIG_EEPROM_AT25=y diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig index 647991514ac..5adf0da5849 100644 --- a/arch/blackfin/configs/IP0X_defconfig +++ b/arch/blackfin/configs/IP0X_defconfig @@ -43,7 +43,6 @@ CONFIG_IP_NF_TARGET_REJECT=y CONFIG_IP_NF_MANGLE=y # CONFIG_WIRELESS is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y @@ -74,7 +73,6 @@ CONFIG_SPI_BFIN5XX=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_OTG_WHITELIST=y CONFIG_USB_MON=y CONFIG_USB_ISP1362_HCD=y diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig index 8fd9b446d65..a6a7298962e 100644 --- a/arch/blackfin/configs/PNAV-10_defconfig +++ b/arch/blackfin/configs/PNAV-10_defconfig @@ -46,7 +46,6 @@ CONFIG_IP_PNP=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CHAR=m CONFIG_MTD_BLOCK=y CONFIG_MTD_RAM=y diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig index 0520c160230..bc216646fe1 100644 --- a/arch/blackfin/configs/SRV1_defconfig +++ b/arch/blackfin/configs/SRV1_defconfig @@ -38,7 +38,6 @@ CONFIG_IRTTY_SIR=m # CONFIG_WIRELESS is not set # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CHAR=m CONFIG_MTD_BLOCK=y CONFIG_MTD_JEDECPROBE=m diff --git a/arch/blackfin/configs/TCM-BF518_defconfig b/arch/blackfin/configs/TCM-BF518_defconfig index e4ed865b885..ea88158ab43 100644 --- a/arch/blackfin/configs/TCM-BF518_defconfig +++ b/arch/blackfin/configs/TCM-BF518_defconfig @@ -54,7 +54,6 @@ CONFIG_IP_PNP=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y diff --git a/arch/blackfin/include/asm/Kbuild b/arch/blackfin/include/asm/Kbuild index 5a0625aad6a..0d93b9a79ca 100644 --- a/arch/blackfin/include/asm/Kbuild +++ b/arch/blackfin/include/asm/Kbuild @@ -1,4 +1,3 @@ -include include/asm-generic/Kbuild.asm generic-y += auxvec.h generic-y += bitsperlong.h @@ -11,20 +10,24 @@ generic-y += emergency-restart.h generic-y += errno.h generic-y += fb.h generic-y += futex.h +generic-y += hash.h generic-y += hw_irq.h generic-y += ioctl.h generic-y += ipcbuf.h generic-y += irq_regs.h generic-y += kdebug.h generic-y += kmap_types.h -generic-y += local64.h +generic-y += kvm_para.h generic-y += local.h +generic-y += local64.h +generic-y += mcs_spinlock.h generic-y += mman.h generic-y += msgbuf.h generic-y += mutex.h generic-y += param.h generic-y += percpu.h generic-y += pgalloc.h +generic-y += preempt.h generic-y += resource.h generic-y += scatterlist.h generic-y += sembuf.h @@ -38,12 +41,9 @@ generic-y += statfs.h generic-y += termbits.h generic-y += termios.h generic-y += topology.h +generic-y += trace_clock.h generic-y += types.h generic-y += ucontext.h generic-y += unaligned.h generic-y += user.h generic-y += xor.h - -header-y += bfin_sport.h -header-y += cachectl.h -header-y += fixed_code.h diff --git a/arch/blackfin/include/asm/atomic.h b/arch/blackfin/include/asm/atomic.h index 54c6e2887e9..a107a98e997 100644 --- a/arch/blackfin/include/asm/atomic.h +++ b/arch/blackfin/include/asm/atomic.h @@ -7,9 +7,13 @@ #ifndef __ARCH_BLACKFIN_ATOMIC__ #define __ARCH_BLACKFIN_ATOMIC__ +#include <asm/cmpxchg.h> + #ifdef CONFIG_SMP +#include <asm/barrier.h> #include <linux/linkage.h> +#include <linux/types.h> asmlinkage int __raw_uncached_fetch_asm(const volatile int *ptr); asmlinkage int __raw_atomic_update_asm(volatile int *ptr, int value); diff --git a/arch/blackfin/include/asm/barrier.h b/arch/blackfin/include/asm/barrier.h new file mode 100644 index 00000000000..42000687799 --- /dev/null +++ b/arch/blackfin/include/asm/barrier.h @@ -0,0 +1,35 @@ +/* + * Copyright 2004-2009 Analog Devices Inc. + * Tony Kou (tonyko@lineo.ca) + * + * Licensed under the GPL-2 or later + */ + +#ifndef _BLACKFIN_BARRIER_H +#define _BLACKFIN_BARRIER_H + +#include <asm/cache.h> + +#define nop() __asm__ __volatile__ ("nop;\n\t" : : ) + +/* + * Force strict CPU ordering. + */ +#ifdef CONFIG_SMP + +#ifdef __ARCH_SYNC_CORE_DCACHE +/* Force Core data cache coherence */ +# define mb() do { barrier(); smp_check_barrier(); smp_mark_barrier(); } while (0) +# define rmb() do { barrier(); smp_check_barrier(); } while (0) +# define wmb() do { barrier(); smp_mark_barrier(); } while (0) +# define read_barrier_depends() do { barrier(); smp_check_barrier(); } while (0) +#endif + +#endif /* !CONFIG_SMP */ + +#define smp_mb__before_atomic() barrier() +#define smp_mb__after_atomic() barrier() + +#include <asm-generic/barrier.h> + +#endif /* _BLACKFIN_BARRIER_H */ diff --git a/arch/blackfin/include/asm/bfin-global.h b/arch/blackfin/include/asm/bfin-global.h index 17bcbf60bca..dc47d79287f 100644 --- a/arch/blackfin/include/asm/bfin-global.h +++ b/arch/blackfin/include/asm/bfin-global.h @@ -14,7 +14,13 @@ #include <linux/linkage.h> #include <linux/types.h> -#if defined(CONFIG_DMA_UNCACHED_4M) +#if defined(CONFIG_DMA_UNCACHED_32M) +# define DMA_UNCACHED_REGION (32 * 1024 * 1024) +#elif defined(CONFIG_DMA_UNCACHED_16M) +# define DMA_UNCACHED_REGION (16 * 1024 * 1024) +#elif defined(CONFIG_DMA_UNCACHED_8M) +# define DMA_UNCACHED_REGION (8 * 1024 * 1024) +#elif defined(CONFIG_DMA_UNCACHED_4M) # define DMA_UNCACHED_REGION (4 * 1024 * 1024) #elif defined(CONFIG_DMA_UNCACHED_2M) # define DMA_UNCACHED_REGION (2 * 1024 * 1024) @@ -35,6 +41,11 @@ extern void bfin_setup_cpudata(unsigned int cpu); extern unsigned long get_cclk(void); extern unsigned long get_sclk(void); +#ifdef CONFIG_BF60x +extern unsigned long get_sclk0(void); +extern unsigned long get_sclk1(void); +extern unsigned long get_dclk(void); +#endif extern unsigned long sclk_to_usecs(unsigned long sclk); extern unsigned long usecs_to_sclk(unsigned long usecs); diff --git a/arch/blackfin/include/asm/bfin5xx_spi.h b/arch/blackfin/include/asm/bfin5xx_spi.h index 5392583d025..fb95c853bb1 100644 --- a/arch/blackfin/include/asm/bfin5xx_spi.h +++ b/arch/blackfin/include/asm/bfin5xx_spi.h @@ -77,7 +77,6 @@ struct bfin5xx_spi_master { struct bfin5xx_spi_chip { u16 ctl_reg; u8 enable_dma; - u8 bits_per_word; u16 cs_chg_udelay; /* Some devices require 16-bit delays */ /* Value to send if no TX value is supplied, usually 0x0 or 0xFFFF */ u16 idle_tx_val; diff --git a/arch/blackfin/include/asm/bfin_dma.h b/arch/blackfin/include/asm/bfin_dma.h index d5112074414..6319f4e4908 100644 --- a/arch/blackfin/include/asm/bfin_dma.h +++ b/arch/blackfin/include/asm/bfin_dma.h @@ -15,12 +15,55 @@ #define DMAEN 0x0001 /* DMA Channel Enable */ #define WNR 0x0002 /* Channel Direction (W/R*) */ #define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */ +#define PSIZE_8 0x00000000 /* Transfer Word Size = 16 */ + +#ifdef CONFIG_BF60x + +#define PSIZE_16 0x00000010 /* Transfer Word Size = 16 */ +#define PSIZE_32 0x00000020 /* Transfer Word Size = 32 */ +#define PSIZE_64 0x00000030 /* Transfer Word Size = 32 */ +#define WDSIZE_16 0x00000100 /* Transfer Word Size = 16 */ +#define WDSIZE_32 0x00000200 /* Transfer Word Size = 32 */ +#define WDSIZE_64 0x00000300 /* Transfer Word Size = 32 */ +#define WDSIZE_128 0x00000400 /* Transfer Word Size = 32 */ +#define WDSIZE_256 0x00000500 /* Transfer Word Size = 32 */ +#define DMA2D 0x04000000 /* DMA Mode (2D/1D*) */ +#define RESTART 0x00000004 /* DMA Buffer Clear SYNC */ +#define DI_EN_X 0x00100000 /* Data Interrupt Enable in X count */ +#define DI_EN_Y 0x00200000 /* Data Interrupt Enable in Y count */ +#define DI_EN_P 0x00300000 /* Data Interrupt Enable in Peripheral */ +#define DI_EN DI_EN_X /* Data Interrupt Enable */ +#define NDSIZE_0 0x00000000 /* Next Descriptor Size = 1 */ +#define NDSIZE_1 0x00010000 /* Next Descriptor Size = 2 */ +#define NDSIZE_2 0x00020000 /* Next Descriptor Size = 3 */ +#define NDSIZE_3 0x00030000 /* Next Descriptor Size = 4 */ +#define NDSIZE_4 0x00040000 /* Next Descriptor Size = 5 */ +#define NDSIZE_5 0x00050000 /* Next Descriptor Size = 6 */ +#define NDSIZE_6 0x00060000 /* Next Descriptor Size = 7 */ +#define NDSIZE 0x00070000 /* Next Descriptor Size */ +#define NDSIZE_OFFSET 16 /* Next Descriptor Size Offset */ +#define DMAFLOW_LIST 0x00004000 /* Descriptor List Mode */ +#define DMAFLOW_LARGE DMAFLOW_LIST +#define DMAFLOW_ARRAY 0x00005000 /* Descriptor Array Mode */ +#define DMAFLOW_LIST_DEMAND 0x00006000 /* Descriptor Demand List Mode */ +#define DMAFLOW_ARRAY_DEMAND 0x00007000 /* Descriptor Demand Array Mode */ +#define DMA_RUN_DFETCH 0x00000100 /* DMA Channel Running Indicator (DFETCH) */ +#define DMA_RUN 0x00000200 /* DMA Channel Running Indicator */ +#define DMA_RUN_WAIT_TRIG 0x00000300 /* DMA Channel Running Indicator (WAIT TRIG) */ +#define DMA_RUN_WAIT_ACK 0x00000400 /* DMA Channel Running Indicator (WAIT ACK) */ + +#else + +#define PSIZE_16 0x0000 /* Transfer Word Size = 16 */ +#define PSIZE_32 0x0000 /* Transfer Word Size = 32 */ #define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */ #define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */ #define DMA2D 0x0010 /* DMA Mode (2D/1D*) */ #define RESTART 0x0020 /* DMA Buffer Clear */ #define DI_SEL 0x0040 /* Data Interrupt Timing Select */ #define DI_EN 0x0080 /* Data Interrupt Enable */ +#define DI_EN_X 0x00C0 /* Data Interrupt Enable in X count*/ +#define DI_EN_Y 0x0080 /* Data Interrupt Enable in Y count*/ #define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ #define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ #define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ @@ -32,18 +75,26 @@ #define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ #define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ #define NDSIZE 0x0f00 /* Next Descriptor Size */ -#define DMAFLOW 0x7000 /* Flow Control */ -#define DMAFLOW_STOP 0x0000 /* Stop Mode */ -#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ +#define NDSIZE_OFFSET 8 /* Next Descriptor Size Offset */ #define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ #define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ #define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ +#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */ +#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */ + +#endif +#define DMAFLOW 0x7000 /* Flow Control */ +#define DMAFLOW_STOP 0x0000 /* Stop Mode */ +#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ /* DMA_IRQ_STATUS Masks */ #define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */ #define DMA_ERR 0x0002 /* DMA Error Interrupt Status */ -#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */ -#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */ +#ifdef CONFIG_BF60x +#define DMA_PIRQ 0x0004 /* DMA Peripheral Error Interrupt Status */ +#else +#define DMA_PIRQ 0 +#endif /* * All Blackfin system MMRs are padded to 32bits even if the register @@ -57,6 +108,26 @@ struct bfin_dma_regs { u32 next_desc_ptr; u32 start_addr; +#ifdef CONFIG_BF60x + u32 cfg; + u32 x_count; + u32 x_modify; + u32 y_count; + u32 y_modify; + u32 pad1; + u32 pad2; + u32 curr_desc_ptr; + u32 prev_desc_ptr; + u32 curr_addr; + u32 irq_status; + u32 curr_x_count; + u32 curr_y_count; + u32 pad3; + u32 bw_limit_count; + u32 curr_bw_limit_count; + u32 bw_monitor_count; + u32 curr_bw_monitor_count; +#else __BFP(config); u32 __pad0; __BFP(x_count); @@ -71,8 +142,10 @@ struct bfin_dma_regs { u32 __pad1; __BFP(curr_y_count); u32 __pad2; +#endif }; +#ifndef CONFIG_BF60x /* * bfin handshake mdma registers layout */ @@ -85,6 +158,7 @@ struct bfin_hmdma_regs { __BFP(ecount); __BFP(bcount); }; +#endif #undef __BFP diff --git a/arch/blackfin/include/asm/bfin_pfmon.h b/arch/blackfin/include/asm/bfin_pfmon.h index accd47e2db4..bf52e1f3225 100644 --- a/arch/blackfin/include/asm/bfin_pfmon.h +++ b/arch/blackfin/include/asm/bfin_pfmon.h @@ -3,7 +3,7 @@ * * Copyright 2005-2011 Analog Devices Inc. * - * Licensed under the ADI BSD license or GPL-2 (or later). + * Licensed under the Clear BSD license or GPL-2 (or later). */ #ifndef __ASM_BFIN_PFMON_H__ diff --git a/arch/blackfin/include/asm/bfin_ppi.h b/arch/blackfin/include/asm/bfin_ppi.h index 3be05faa2c6..a4e872e16e7 100644 --- a/arch/blackfin/include/asm/bfin_ppi.h +++ b/arch/blackfin/include/asm/bfin_ppi.h @@ -10,6 +10,7 @@ #define __ASM_BFIN_PPI_H__ #include <linux/types.h> +#include <asm/blackfin.h> /* * All Blackfin system MMRs are padded to 32bits even if the register @@ -48,6 +49,133 @@ struct bfin_eppi_regs { u32 clip; }; +/* + * bfin eppi3 registers layout + */ +struct bfin_eppi3_regs { + u32 stat; + u32 hcnt; + u32 hdly; + u32 vcnt; + u32 vdly; + u32 frame; + u32 line; + u32 clkdiv; + u32 ctl; + u32 fs1_wlhb; + u32 fs1_paspl; + u32 fs2_wlvb; + u32 fs2_palpf; + u32 imsk; + u32 oddclip; + u32 evenclip; + u32 fs1_dly; + u32 fs2_dly; + u32 ctl2; +}; + #undef __BFP +#ifdef EPPI0_CTL2 +#define EPPI_STAT_CFIFOERR 0x00000001 /* Chroma FIFO Error */ +#define EPPI_STAT_YFIFOERR 0x00000002 /* Luma FIFO Error */ +#define EPPI_STAT_LTERROVR 0x00000004 /* Line Track Overflow */ +#define EPPI_STAT_LTERRUNDR 0x00000008 /* Line Track Underflow */ +#define EPPI_STAT_FTERROVR 0x00000010 /* Frame Track Overflow */ +#define EPPI_STAT_FTERRUNDR 0x00000020 /* Frame Track Underflow */ +#define EPPI_STAT_ERRNCOR 0x00000040 /* Preamble Error Not Corrected */ +#define EPPI_STAT_PXPERR 0x00000080 /* PxP Ready Error */ +#define EPPI_STAT_ERRDET 0x00004000 /* Preamble Error Detected */ +#define EPPI_STAT_FLD 0x00008000 /* Current Field Received by EPPI */ + +#define EPPI_HCNT_VALUE 0x0000FFFF /* Holds the number of samples to read in or write out per line, after PPIx_HDLY number of cycles have expired since the last assertion of PPIx_FS1 */ + +#define EPPI_HDLY_VALUE 0x0000FFFF /* Number of PPIx_CLK cycles to delay after assertion of PPIx_FS1 before starting to read or write data */ + +#define EPPI_VCNT_VALUE 0x0000FFFF /* Holds the number of lines to read in or write out, after PPIx_VDLY number of lines from the start of frame */ + +#define EPPI_VDLY_VALUE 0x0000FFFF /* Number of lines to wait after the start of a new frame before starting to read/transmit data */ + +#define EPPI_FRAME_VALUE 0x0000FFFF /* Holds the number of lines expected per frame of data */ + +#define EPPI_LINE_VALUE 0x0000FFFF /* Holds the number of samples expected per line */ + +#define EPPI_CLKDIV_VALUE 0x0000FFFF /* Internal clock divider */ + +#define EPPI_CTL_EN 0x00000001 /* PPI Enable */ +#define EPPI_CTL_DIR 0x00000002 /* PPI Direction */ +#define EPPI_CTL_XFRTYPE 0x0000000C /* PPI Operating Mode */ +#define EPPI_CTL_ACTIVE656 0x00000000 /* XFRTYPE: ITU656 Active Video Only Mode */ +#define EPPI_CTL_ENTIRE656 0x00000004 /* XFRTYPE: ITU656 Entire Field Mode */ +#define EPPI_CTL_VERT656 0x00000008 /* XFRTYPE: ITU656 Vertical Blanking Only Mode */ +#define EPPI_CTL_NON656 0x0000000C /* XFRTYPE: Non-ITU656 Mode (GP Mode) */ +#define EPPI_CTL_FSCFG 0x00000030 /* Frame Sync Configuration */ +#define EPPI_CTL_SYNC0 0x00000000 /* FSCFG: Sync Mode 0 */ +#define EPPI_CTL_SYNC1 0x00000010 /* FSCFG: Sync Mode 1 */ +#define EPPI_CTL_SYNC2 0x00000020 /* FSCFG: Sync Mode 2 */ +#define EPPI_CTL_SYNC3 0x00000030 /* FSCFG: Sync Mode 3 */ +#define EPPI_CTL_FLDSEL 0x00000040 /* Field Select/Trigger */ +#define EPPI_CTL_ITUTYPE 0x00000080 /* ITU Interlace or Progressive */ +#define EPPI_CTL_BLANKGEN 0x00000100 /* ITU Output Mode with Internal Blanking Generation */ +#define EPPI_CTL_ICLKGEN 0x00000200 /* Internal Clock Generation */ +#define EPPI_CTL_IFSGEN 0x00000400 /* Internal Frame Sync Generation */ +#define EPPI_CTL_SIGNEXT 0x00000800 /* Sign Extension */ +#define EPPI_CTL_POLC 0x00003000 /* Frame Sync and Data Driving and Sampling Edges */ +#define EPPI_CTL_POLC0 0x00000000 /* POLC: Clock/Sync polarity mode 0 */ +#define EPPI_CTL_POLC1 0x00001000 /* POLC: Clock/Sync polarity mode 1 */ +#define EPPI_CTL_POLC2 0x00002000 /* POLC: Clock/Sync polarity mode 2 */ +#define EPPI_CTL_POLC3 0x00003000 /* POLC: Clock/Sync polarity mode 3 */ +#define EPPI_CTL_POLS 0x0000C000 /* Frame Sync Polarity */ +#define EPPI_CTL_FS1HI_FS2HI 0x00000000 /* POLS: FS1 and FS2 are active high */ +#define EPPI_CTL_FS1LO_FS2HI 0x00004000 /* POLS: FS1 is active low. FS2 is active high */ +#define EPPI_CTL_FS1HI_FS2LO 0x00008000 /* POLS: FS1 is active high. FS2 is active low */ +#define EPPI_CTL_FS1LO_FS2LO 0x0000C000 /* POLS: FS1 and FS2 are active low */ +#define EPPI_CTL_DLEN 0x00070000 /* Data Length */ +#define EPPI_CTL_DLEN08 0x00000000 /* DLEN: 8 bits */ +#define EPPI_CTL_DLEN10 0x00010000 /* DLEN: 10 bits */ +#define EPPI_CTL_DLEN12 0x00020000 /* DLEN: 12 bits */ +#define EPPI_CTL_DLEN14 0x00030000 /* DLEN: 14 bits */ +#define EPPI_CTL_DLEN16 0x00040000 /* DLEN: 16 bits */ +#define EPPI_CTL_DLEN18 0x00050000 /* DLEN: 18 bits */ +#define EPPI_CTL_DLEN20 0x00060000 /* DLEN: 20 bits */ +#define EPPI_CTL_DLEN24 0x00070000 /* DLEN: 24 bits */ +#define EPPI_CTL_DMIRR 0x00080000 /* Data Mirroring */ +#define EPPI_CTL_SKIPEN 0x00100000 /* Skip Enable */ +#define EPPI_CTL_SKIPEO 0x00200000 /* Skip Even or Odd */ +#define EPPI_CTL_PACKEN 0x00400000 /* Pack/Unpack Enable */ +#define EPPI_CTL_SWAPEN 0x00800000 /* Swap Enable */ +#define EPPI_CTL_SPLTEO 0x01000000 /* Split Even and Odd Data Samples */ +#define EPPI_CTL_SUBSPLTODD 0x02000000 /* Sub-Split Odd Samples */ +#define EPPI_CTL_SPLTWRD 0x04000000 /* Split Word */ +#define EPPI_CTL_RGBFMTEN 0x08000000 /* RGB Formatting Enable */ +#define EPPI_CTL_DMACFG 0x10000000 /* One or Two DMA Channels Mode */ +#define EPPI_CTL_DMAFINEN 0x20000000 /* DMA Finish Enable */ +#define EPPI_CTL_MUXSEL 0x40000000 /* MUX Select */ +#define EPPI_CTL_CLKGATEN 0x80000000 /* Clock Gating Enable */ + +#define EPPI_FS2_WLVB_F2VBAD 0xFF000000 /* In GP transmit mode with BLANKGEN = 1, contains number of lines of vertical blanking after field 2 */ +#define EPPI_FS2_WLVB_F2VBBD 0x00FF0000 /* In GP transmit mode with BLANKGEN = 1, contains number of lines of vertical blanking before field 2 */ +#define EPPI_FS2_WLVB_F1VBAD 0x0000FF00 /* In GP transmit mode with, BLANKGEN = 1, contains number of lines of vertical blanking after field 1 */ +#define EPPI_FS2_WLVB_F1VBBD 0x000000FF /* In GP 2, or 3 FS modes used to generate PPIx_FS2 width (32-bit). In GP Transmit mode, with BLANKGEN=1, contains the number of lines of Vertical blanking before field 1. */ + +#define EPPI_FS2_PALPF_F2ACT 0xFFFF0000 /* Number of lines of Active Data in Field 2 */ +#define EPPI_FS2_PALPF_F1ACT 0x0000FFFF /* Number of lines of Active Data in Field 1 */ + +#define EPPI_IMSK_CFIFOERR 0x00000001 /* Mask CFIFO Underflow or Overflow Error Interrupt */ +#define EPPI_IMSK_YFIFOERR 0x00000002 /* Mask YFIFO Underflow or Overflow Error Interrupt */ +#define EPPI_IMSK_LTERROVR 0x00000004 /* Mask Line Track Overflow Error Interrupt */ +#define EPPI_IMSK_LTERRUNDR 0x00000008 /* Mask Line Track Underflow Error Interrupt */ +#define EPPI_IMSK_FTERROVR 0x00000010 /* Mask Frame Track Overflow Error Interrupt */ +#define EPPI_IMSK_FTERRUNDR 0x00000020 /* Mask Frame Track Underflow Error Interrupt */ +#define EPPI_IMSK_ERRNCOR 0x00000040 /* Mask ITU Preamble Error Not Corrected Interrupt */ +#define EPPI_IMSK_PXPERR 0x00000080 /* Mask PxP Ready Error Interrupt */ + +#define EPPI_ODDCLIP_HIGHODD 0xFFFF0000 +#define EPPI_ODDCLIP_LOWODD 0x0000FFFF + +#define EPPI_EVENCLIP_HIGHEVEN 0xFFFF0000 +#define EPPI_EVENCLIP_LOWEVEN 0x0000FFFF + +#define EPPI_CTL2_FS1FINEN 0x00000002 /* HSYNC Finish Enable */ +#endif #endif diff --git a/arch/blackfin/include/asm/bfin_rotary.h b/arch/blackfin/include/asm/bfin_rotary.h index 0b6910bdc57..8895a750c70 100644 --- a/arch/blackfin/include/asm/bfin_rotary.h +++ b/arch/blackfin/include/asm/bfin_rotary.h @@ -39,6 +39,7 @@ struct bfin_rotary_platform_data { unsigned int rotary_rel_code; unsigned short debounce; /* 0..17 */ unsigned short mode; + unsigned short pm_wakeup; }; /* CNT_CONFIG bitmasks */ diff --git a/arch/blackfin/include/asm/bfin_sdh.h b/arch/blackfin/include/asm/bfin_sdh.h index 6a4cfe2d336..a99957ea9e9 100644 --- a/arch/blackfin/include/asm/bfin_sdh.h +++ b/arch/blackfin/include/asm/bfin_sdh.h @@ -24,18 +24,27 @@ struct bfin_sd_host { #define CMD_INT_E (1 << 8) /* Command Interrupt */ #define CMD_PEND_E (1 << 9) /* Command Pending */ #define CMD_E (1 << 10) /* Command Enable */ +#ifdef RSI_BLKSZ +#define CMD_CRC_CHECK_D (1 << 11) /* CRC Check is disabled */ +#define CMD_DATA0_BUSY (1 << 12) /* Check for Busy State on the DATA0 pin */ +#endif /* SDH_PWR_CTL bitmasks */ +#ifndef RSI_BLKSZ #define PWR_ON 0x3 /* Power On */ #define SD_CMD_OD (1 << 6) /* Open Drain Output */ #define ROD_CTL (1 << 7) /* Rod Control */ +#endif /* SDH_CLK_CTL bitmasks */ #define CLKDIV 0xff /* MC_CLK Divisor */ #define CLK_E (1 << 8) /* MC_CLK Bus Clock Enable */ #define PWR_SV_E (1 << 9) /* Power Save Enable */ #define CLKDIV_BYPASS (1 << 10) /* Bypass Divisor */ -#define WIDE_BUS (1 << 11) /* Wide Bus Mode Enable */ +#define BUS_MODE_MASK 0x1800 /* Bus Mode Mask */ +#define STD_BUS_1 0x000 /* Standard Bus 1 bit mode */ +#define WIDE_BUS_4 0x800 /* Wide Bus 4 bit mode */ +#define BYTE_BUS_8 0x1000 /* Byte Bus 8 bit mode */ /* SDH_RESP_CMD bitmasks */ #define RESP_CMD 0x3f /* Response Command */ @@ -45,7 +54,13 @@ struct bfin_sd_host { #define DTX_DIR (1 << 1) /* Data Transfer Direction */ #define DTX_MODE (1 << 2) /* Data Transfer Mode */ #define DTX_DMA_E (1 << 3) /* Data Transfer DMA Enable */ +#ifndef RSI_BLKSZ #define DTX_BLK_LGTH (0xf << 4) /* Data Transfer Block Length */ +#else + +/* Bit masks for SDH_BLK_SIZE */ +#define DTX_BLK_LGTH 0x1fff /* Data Transfer Block Length */ +#endif /* SDH_STATUS bitmasks */ #define CMD_CRC_FAIL (1 << 0) /* CMD CRC Fail */ @@ -114,10 +129,14 @@ struct bfin_sd_host { /* SDH_E_STATUS bitmasks */ #define SDIO_INT_DET (1 << 1) /* SDIO Int Detected */ #define SD_CARD_DET (1 << 4) /* SD Card Detect */ +#define SD_CARD_BUSYMODE (1 << 31) /* Card is in Busy mode */ +#define SD_CARD_SLPMODE (1 << 30) /* Card in Sleep Mode */ +#define SD_CARD_READY (1 << 17) /* Card Ready */ /* SDH_E_MASK bitmasks */ #define SDIO_MSK (1 << 1) /* Mask SDIO Int Detected */ -#define SCD_MSK (1 << 6) /* Mask Card Detect */ +#define SCD_MSK (1 << 4) /* Mask Card Detect */ +#define CARD_READY_MSK (1 << 16) /* Mask Card Ready */ /* SDH_CFG bitmasks */ #define CLKS_EN (1 << 0) /* Clocks Enable */ @@ -126,7 +145,15 @@ struct bfin_sd_host { #define SD_RST (1 << 4) /* SDMMC Reset */ #define PUP_SDDAT (1 << 5) /* Pull-up SD_DAT */ #define PUP_SDDAT3 (1 << 6) /* Pull-up SD_DAT3 */ +#ifndef RSI_BLKSZ #define PD_SDDAT3 (1 << 7) /* Pull-down SD_DAT3 */ +#else +#define PWR_ON 0x600 /* Power On */ +#define SD_CMD_OD (1 << 11) /* Open Drain Output */ +#define BOOT_EN (1 << 12) /* Boot Enable */ +#define BOOT_MODE (1 << 13) /* Alternate Boot Mode */ +#define BOOT_ACK_EN (1 << 14) /* Boot ACK is expected */ +#endif /* SDH_RD_WAIT_EN bitmasks */ #define RWR (1 << 0) /* Read Wait Request */ diff --git a/arch/blackfin/include/asm/bfin_serial.h b/arch/blackfin/include/asm/bfin_serial.h index 68bcc3d119b..2d90d62edc9 100644 --- a/arch/blackfin/include/asm/bfin_serial.h +++ b/arch/blackfin/include/asm/bfin_serial.h @@ -18,7 +18,7 @@ defined(CONFIG_BFIN_UART1_CTSRTS) || \ defined(CONFIG_BFIN_UART2_CTSRTS) || \ defined(CONFIG_BFIN_UART3_CTSRTS) -# ifdef BFIN_UART_BF54X_STYLE +# if defined(BFIN_UART_BF54X_STYLE) || defined(BFIN_UART_BF60X_STYLE) # define CONFIG_SERIAL_BFIN_HARD_CTSRTS # else # define CONFIG_SERIAL_BFIN_CTSRTS @@ -58,14 +58,69 @@ struct bfin_serial_port { #endif }; +#ifdef BFIN_UART_BF60X_STYLE + +/* UART_CTL Masks */ +#define UCEN 0x1 /* Enable UARTx Clocks */ +#define LOOP_ENA 0x2 /* Loopback Mode Enable */ +#define UMOD_MDB 0x10 /* Enable MDB Mode */ +#define UMOD_IRDA 0x20 /* Enable IrDA Mode */ +#define UMOD_MASK 0x30 /* Uart Mode Mask */ +#define WLS(x) (((x-5) & 0x03) << 8) /* Word Length Select */ +#define WLS_MASK 0x300 /* Word length Select Mask */ +#define WLS_OFFSET 8 /* Word length Select Offset */ +#define STB 0x1000 /* Stop Bits */ +#define STBH 0x2000 /* Half Stop Bits */ +#define PEN 0x4000 /* Parity Enable */ +#define EPS 0x8000 /* Even Parity Select */ +#define STP 0x10000 /* Stick Parity */ +#define FPE 0x20000 /* Force Parity Error On Transmit */ +#define FFE 0x40000 /* Force Framing Error On Transmit */ +#define SB 0x80000 /* Set Break */ +#define LCR_MASK (SB | STP | EPS | PEN | STB | WLS_MASK) +#define FCPOL 0x400000 /* Flow Control Pin Polarity */ +#define RPOLC 0x800000 /* IrDA RX Polarity Change */ +#define TPOLC 0x1000000 /* IrDA TX Polarity Change */ +#define MRTS 0x2000000 /* Manual Request To Send */ +#define XOFF 0x4000000 /* Transmitter Off */ +#define ARTS 0x8000000 /* Automatic Request To Send */ +#define ACTS 0x10000000 /* Automatic Clear To Send */ +#define RFIT 0x20000000 /* Receive FIFO IRQ Threshold */ +#define RFRT 0x40000000 /* Receive FIFO RTS Threshold */ + +/* UART_STAT Masks */ +#define DR 0x01 /* Data Ready */ +#define OE 0x02 /* Overrun Error */ +#define PE 0x04 /* Parity Error */ +#define FE 0x08 /* Framing Error */ +#define BI 0x10 /* Break Interrupt */ +#define THRE 0x20 /* THR Empty */ +#define TEMT 0x80 /* TSR and UART_THR Empty */ +#define TFI 0x100 /* Transmission Finished Indicator */ + +#define ASTKY 0x200 /* Address Sticky */ +#define ADDR 0x400 /* Address bit status */ +#define RO 0x800 /* Reception Ongoing */ +#define SCTS 0x1000 /* Sticky CTS */ +#define CTS 0x10000 /* Clear To Send */ +#define RFCS 0x20000 /* Receive FIFO Count Status */ + +/* UART_CLOCK Masks */ +#define EDBO 0x80000000 /* Enable Devide by One */ + +#else /* BFIN_UART_BF60X_STYLE */ + /* UART_LCR Masks */ #define WLS(x) (((x)-5) & 0x03) /* Word Length Select */ +#define WLS_MASK 0x03 /* Word length Select Mask */ +#define WLS_OFFSET 0 /* Word length Select Offset */ #define STB 0x04 /* Stop Bits */ #define PEN 0x08 /* Parity Enable */ #define EPS 0x10 /* Even Parity Select */ #define STP 0x20 /* Stick Parity */ #define SB 0x40 /* Set Break */ #define DLAB 0x80 /* Divisor Latch Access */ +#define LCR_MASK (SB | STP | EPS | PEN | STB | WLS_MASK) /* UART_LSR Masks */ #define DR 0x01 /* Data Ready */ @@ -77,15 +132,6 @@ struct bfin_serial_port { #define TEMT 0x40 /* TSR and UART_THR Empty */ #define TFI 0x80 /* Transmission Finished Indicator */ -/* UART_IER Masks */ -#define ERBFI 0x01 /* Enable Receive Buffer Full Interrupt */ -#define ETBEI 0x02 /* Enable Transmit Buffer Empty Interrupt */ -#define ELSI 0x04 /* Enable RX Status Interrupt */ -#define EDSSI 0x08 /* Enable Modem Status Interrupt */ -#define EDTPTI 0x10 /* Enable DMA Transmit PIRQ Interrupt */ -#define ETFI 0x20 /* Enable Transmission Finished Interrupt */ -#define ERFCI 0x40 /* Enable Receive FIFO Count Interrupt */ - /* UART_MCR Masks */ #define XOFF 0x01 /* Transmitter Off */ #define MRTS 0x02 /* Manual Request To Send */ @@ -103,13 +149,36 @@ struct bfin_serial_port { /* UART_GCTL Masks */ #define UCEN 0x01 /* Enable UARTx Clocks */ -#define IREN 0x02 /* Enable IrDA Mode */ +#define UMOD_IRDA 0x02 /* Enable IrDA Mode */ +#define UMOD_MASK 0x02 /* Uart Mode Mask */ #define TPOLC 0x04 /* IrDA TX Polarity Change */ #define RPOLC 0x08 /* IrDA RX Polarity Change */ #define FPE 0x10 /* Force Parity Error On Transmit */ #define FFE 0x20 /* Force Framing Error On Transmit */ -#ifdef BFIN_UART_BF54X_STYLE +#endif /* BFIN_UART_BF60X_STYLE */ + +/* UART_IER Masks */ +#define ERBFI 0x01 /* Enable Receive Buffer Full Interrupt */ +#define ETBEI 0x02 /* Enable Transmit Buffer Empty Interrupt */ +#define ELSI 0x04 /* Enable RX Status Interrupt */ +#define EDSSI 0x08 /* Enable Modem Status Interrupt */ +#define EDTPTI 0x10 /* Enable DMA Transmit PIRQ Interrupt */ +#define ETFI 0x20 /* Enable Transmission Finished Interrupt */ +#define ERFCI 0x40 /* Enable Receive FIFO Count Interrupt */ + +#if defined(BFIN_UART_BF60X_STYLE) +# define OFFSET_REDIV 0x00 /* Version ID Register */ +# define OFFSET_CTL 0x04 /* Control Register */ +# define OFFSET_STAT 0x08 /* Status Register */ +# define OFFSET_SCR 0x0C /* SCR Scratch Register */ +# define OFFSET_CLK 0x10 /* Clock Rate Register */ +# define OFFSET_IER 0x14 /* Interrupt Enable Register */ +# define OFFSET_IER_SET 0x18 /* Set Interrupt Enable Register */ +# define OFFSET_IER_CLEAR 0x1C /* Clear Interrupt Enable Register */ +# define OFFSET_RBR 0x20 /* Receive Buffer register */ +# define OFFSET_THR 0x24 /* Transmit Holding register */ +#elif defined(BFIN_UART_BF54X_STYLE) # define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ # define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ # define OFFSET_GCTL 0x08 /* Global Control Register */ @@ -145,7 +214,23 @@ struct bfin_serial_port { */ #define __BFP(m) u16 m; u16 __pad_##m struct bfin_uart_regs { -#ifdef BFIN_UART_BF54X_STYLE +#if defined(BFIN_UART_BF60X_STYLE) + u32 revid; + u32 ctl; + u32 stat; + u32 scr; + u32 clk; + u32 ier; + u32 ier_set; + u32 ier_clear; + u32 rbr; + u32 thr; + u32 taip; + u32 tsr; + u32 rsr; + u32 txdiv; + u32 rxdiv; +#elif defined(BFIN_UART_BF54X_STYLE) __BFP(dll); __BFP(dlh); __BFP(gctl); @@ -182,13 +267,70 @@ struct bfin_uart_regs { }; #undef __BFP +#define port_membase(uart) (((struct bfin_serial_port *)(uart))->port.membase) + +/* #ifndef port_membase # define port_membase(p) 0 #endif +*/ +#ifdef BFIN_UART_BF60X_STYLE + +#define UART_GET_CHAR(p) bfin_read32(port_membase(p) + OFFSET_RBR) +#define UART_GET_CLK(p) bfin_read32(port_membase(p) + OFFSET_CLK) +#define UART_GET_CTL(p) bfin_read32(port_membase(p) + OFFSET_CTL) +#define UART_GET_GCTL(p) UART_GET_CTL(p) +#define UART_GET_LCR(p) UART_GET_CTL(p) +#define UART_GET_MCR(p) UART_GET_CTL(p) +#if ANOMALY_16000030 +#define UART_GET_STAT(p) \ +({ \ + u32 __ret; \ + unsigned long flags; \ + flags = hard_local_irq_save(); \ + __ret = bfin_read32(port_membase(p) + OFFSET_STAT); \ + hard_local_irq_restore(flags); \ + __ret; \ +}) +#else +#define UART_GET_STAT(p) bfin_read32(port_membase(p) + OFFSET_STAT) +#endif +#define UART_GET_MSR(p) UART_GET_STAT(p) + +#define UART_PUT_CHAR(p, v) bfin_write32(port_membase(p) + OFFSET_THR, v) +#define UART_PUT_CLK(p, v) bfin_write32(port_membase(p) + OFFSET_CLK, v) +#define UART_PUT_CTL(p, v) bfin_write32(port_membase(p) + OFFSET_CTL, v) +#define UART_PUT_GCTL(p, v) UART_PUT_CTL(p, v) +#define UART_PUT_LCR(p, v) UART_PUT_CTL(p, v) +#define UART_PUT_MCR(p, v) UART_PUT_CTL(p, v) +#define UART_PUT_STAT(p, v) bfin_write32(port_membase(p) + OFFSET_STAT, v) + +#define UART_CLEAR_IER(p, v) bfin_write32(port_membase(p) + OFFSET_IER_CLEAR, v) +#define UART_GET_IER(p) bfin_read32(port_membase(p) + OFFSET_IER) +#define UART_SET_IER(p, v) bfin_write32(port_membase(p) + OFFSET_IER_SET, v) + +#define UART_CLEAR_DLAB(p) /* MMRs not muxed on BF60x */ +#define UART_SET_DLAB(p) /* MMRs not muxed on BF60x */ + +#define UART_CLEAR_LSR(p) UART_PUT_STAT(p, -1) +#define UART_GET_LSR(p) UART_GET_STAT(p) +#define UART_PUT_LSR(p, v) UART_PUT_STAT(p, v) + +/* This handles hard CTS/RTS */ +#define BFIN_UART_CTSRTS_HARD +#define UART_CLEAR_SCTS(p) UART_PUT_STAT(p, SCTS) +#define UART_GET_CTS(x) (UART_GET_MSR(x) & CTS) +#define UART_DISABLE_RTS(x) UART_PUT_MCR(x, UART_GET_MCR(x) & ~(ARTS | MRTS)) +#define UART_ENABLE_RTS(x) UART_PUT_MCR(x, UART_GET_MCR(x) | MRTS | ARTS) +#define UART_ENABLE_INTS(x, v) UART_SET_IER(x, v) +#define UART_DISABLE_INTS(x) UART_CLEAR_IER(x, 0xF) + +#else /* BFIN_UART_BF60X_STYLE */ #define UART_GET_CHAR(p) bfin_read16(port_membase(p) + OFFSET_RBR) #define UART_GET_DLL(p) bfin_read16(port_membase(p) + OFFSET_DLL) #define UART_GET_DLH(p) bfin_read16(port_membase(p) + OFFSET_DLH) +#define UART_GET_CLK(p) ((UART_GET_DLH(p) << 8) | UART_GET_DLL(p)) #define UART_GET_GCTL(p) bfin_read16(port_membase(p) + OFFSET_GCTL) #define UART_GET_LCR(p) bfin_read16(port_membase(p) + OFFSET_LCR) #define UART_GET_MCR(p) bfin_read16(port_membase(p) + OFFSET_MCR) @@ -197,6 +339,11 @@ struct bfin_uart_regs { #define UART_PUT_CHAR(p, v) bfin_write16(port_membase(p) + OFFSET_THR, v) #define UART_PUT_DLL(p, v) bfin_write16(port_membase(p) + OFFSET_DLL, v) #define UART_PUT_DLH(p, v) bfin_write16(port_membase(p) + OFFSET_DLH, v) +#define UART_PUT_CLK(p, v) do \ +{\ +UART_PUT_DLL(p, v & 0xFF); \ +UART_PUT_DLH(p, (v >> 8) & 0xFF); } while (0); + #define UART_PUT_GCTL(p, v) bfin_write16(port_membase(p) + OFFSET_GCTL, v) #define UART_PUT_LCR(p, v) bfin_write16(port_membase(p) + OFFSET_LCR, v) #define UART_PUT_MCR(p, v) bfin_write16(port_membase(p) + OFFSET_MCR, v) @@ -233,12 +380,17 @@ struct bfin_uart_regs { #define UART_CLEAR_DLAB(p) do { UART_PUT_LCR(p, UART_GET_LCR(p) & ~DLAB); SSYNC(); } while (0) #define UART_SET_DLAB(p) do { UART_PUT_LCR(p, UART_GET_LCR(p) | DLAB); SSYNC(); } while (0) +#define get_lsr_cache(uart) (((struct bfin_serial_port *)(uart))->lsr) +#define put_lsr_cache(uart, v) (((struct bfin_serial_port *)(uart))->lsr = (v)) + +/* #ifndef put_lsr_cache # define put_lsr_cache(p, v) #endif #ifndef get_lsr_cache # define get_lsr_cache(p) 0 #endif +*/ /* The hardware clears the LSR bits upon read, so we need to cache * some of the more fun bits in software so they don't get lost @@ -267,7 +419,9 @@ static inline void UART_PUT_LSR(void *p, uint16_t val) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) #define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) -#endif +#endif /* BFIN_UART_BF54X_STYLE */ + +#endif /* BFIN_UART_BF60X_STYLE */ #ifndef BFIN_UART_TX_FIFO_SIZE # define BFIN_UART_TX_FIFO_SIZE 2 diff --git a/arch/blackfin/include/asm/bfin_simple_timer.h b/arch/blackfin/include/asm/bfin_simple_timer.h index 5248c133bc6..b2d5e733079 100644 --- a/arch/blackfin/include/asm/bfin_simple_timer.h +++ b/arch/blackfin/include/asm/bfin_simple_timer.h @@ -11,9 +11,17 @@ #define BFIN_SIMPLE_TIMER_IOCTL_MAGIC 't' -#define BFIN_SIMPLE_TIMER_SET_PERIOD _IO (BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 2) -#define BFIN_SIMPLE_TIMER_START _IO (BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 6) -#define BFIN_SIMPLE_TIMER_STOP _IO (BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 8) -#define BFIN_SIMPLE_TIMER_READ _IO (BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 10) +#define BFIN_SIMPLE_TIMER_SET_PERIOD _IO(BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 2) +#define BFIN_SIMPLE_TIMER_SET_WIDTH _IO(BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 3) +#define BFIN_SIMPLE_TIMER_SET_MODE _IO(BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 4) +#define BFIN_SIMPLE_TIMER_START _IO(BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 6) +#define BFIN_SIMPLE_TIMER_STOP _IO(BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 8) +#define BFIN_SIMPLE_TIMER_READ _IO(BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 10) +#define BFIN_SIMPLE_TIMER_READ_COUNTER _IO(BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 11) + +#define BFIN_SIMPLE_TIMER_MODE_PWM_ONESHOT 0 +#define BFIN_SIMPLE_TIMER_MODE_PWMOUT_CONT 1 +#define BFIN_SIMPLE_TIMER_MODE_WDTH_CAP 2 +#define BFIN_SIMPLE_TIMER_MODE_PWMOUT_CONT_NOIRQ 3 #endif diff --git a/arch/blackfin/include/asm/bfin_sport.h b/arch/blackfin/include/asm/bfin_sport.h index f8568a31d0a..50b9dfd4839 100644 --- a/arch/blackfin/include/asm/bfin_sport.h +++ b/arch/blackfin/include/asm/bfin_sport.h @@ -5,61 +5,12 @@ * * Licensed under the GPL-2 or later. */ - #ifndef __BFIN_SPORT_H__ #define __BFIN_SPORT_H__ -/* Sport mode: it can be set to TDM, i2s or others */ -#define NORM_MODE 0x0 -#define TDM_MODE 0x1 -#define I2S_MODE 0x2 - -/* Data format, normal, a-law or u-law */ -#define NORM_FORMAT 0x0 -#define ALAW_FORMAT 0x2 -#define ULAW_FORMAT 0x3 - -/* Function driver which use sport must initialize the structure */ -struct sport_config { - /* TDM (multichannels), I2S or other mode */ - unsigned int mode:3; - - /* if TDM mode is selected, channels must be set */ - int channels; /* Must be in 8 units */ - unsigned int frame_delay:4; /* Delay between frame sync pulse and first bit */ - - /* I2S mode */ - unsigned int right_first:1; /* Right stereo channel first */ - - /* In mormal mode, the following item need to be set */ - unsigned int lsb_first:1; /* order of transmit or receive data */ - unsigned int fsync:1; /* Frame sync required */ - unsigned int data_indep:1; /* data independent frame sync generated */ - unsigned int act_low:1; /* Active low TFS */ - unsigned int late_fsync:1; /* Late frame sync */ - unsigned int tckfe:1; - unsigned int sec_en:1; /* Secondary side enabled */ - - /* Choose clock source */ - unsigned int int_clk:1; /* Internal or external clock */ - - /* If external clock is used, the following fields are ignored */ - int serial_clk; - int fsync_clk; - - unsigned int data_format:2; /* Normal, u-law or a-law */ - - int word_len; /* How length of the word in bits, 3-32 bits */ - int dma_enabled; -}; - -/* Userspace interface */ -#define SPORT_IOC_MAGIC 'P' -#define SPORT_IOC_CONFIG _IOWR('P', 0x01, struct sport_config) - -#ifdef __KERNEL__ #include <linux/types.h> +#include <uapi/asm/bfin_sport.h> /* * All Blackfin system MMRs are padded to 32bits even if the register @@ -118,76 +69,3 @@ struct bfin_snd_platform_data { }) #endif - -/* SPORT_TCR1 Masks */ -#define TSPEN 0x0001 /* TX enable */ -#define ITCLK 0x0002 /* Internal TX Clock Select */ -#define TDTYPE 0x000C /* TX Data Formatting Select */ -#define DTYPE_NORM 0x0000 /* Data Format Normal */ -#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ -#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ -#define TLSBIT 0x0010 /* TX Bit Order */ -#define ITFS 0x0200 /* Internal TX Frame Sync Select */ -#define TFSR 0x0400 /* TX Frame Sync Required Select */ -#define DITFS 0x0800 /* Data Independent TX Frame Sync Select */ -#define LTFS 0x1000 /* Low TX Frame Sync Select */ -#define LATFS 0x2000 /* Late TX Frame Sync Select */ -#define TCKFE 0x4000 /* TX Clock Falling Edge Select */ - -/* SPORT_TCR2 Masks */ -#define SLEN 0x001F /* SPORT TX Word Length (2 - 31) */ -#define DP_SLEN(x) BFIN_DEPOSIT(SLEN, x) -#define EX_SLEN(x) BFIN_EXTRACT(SLEN, x) -#define TXSE 0x0100 /* TX Secondary Enable */ -#define TSFSE 0x0200 /* TX Stereo Frame Sync Enable */ -#define TRFST 0x0400 /* TX Right-First Data Order */ - -/* SPORT_RCR1 Masks */ -#define RSPEN 0x0001 /* RX enable */ -#define IRCLK 0x0002 /* Internal RX Clock Select */ -#define RDTYPE 0x000C /* RX Data Formatting Select */ -/* DTYPE_* defined above */ -#define RLSBIT 0x0010 /* RX Bit Order */ -#define IRFS 0x0200 /* Internal RX Frame Sync Select */ -#define RFSR 0x0400 /* RX Frame Sync Required Select */ -#define LRFS 0x1000 /* Low RX Frame Sync Select */ -#define LARFS 0x2000 /* Late RX Frame Sync Select */ -#define RCKFE 0x4000 /* RX Clock Falling Edge Select */ - -/* SPORT_RCR2 Masks */ -/* SLEN defined above */ -#define RXSE 0x0100 /* RX Secondary Enable */ -#define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */ -#define RRFST 0x0400 /* Right-First Data Order */ - -/* SPORT_STAT Masks */ -#define RXNE 0x0001 /* RX FIFO Not Empty Status */ -#define RUVF 0x0002 /* RX Underflow Status */ -#define ROVF 0x0004 /* RX Overflow Status */ -#define TXF 0x0008 /* TX FIFO Full Status */ -#define TUVF 0x0010 /* TX Underflow Status */ -#define TOVF 0x0020 /* TX Overflow Status */ -#define TXHRE 0x0040 /* TX Hold Register Empty */ - -/* SPORT_MCMC1 Masks */ -#define SP_WOFF 0x03FF /* Multichannel Window Offset Field */ -#define DP_SP_WOFF(x) BFIN_DEPOSIT(SP_WOFF, x) -#define EX_SP_WOFF(x) BFIN_EXTRACT(SP_WOFF, x) -#define SP_WSIZE 0xF000 /* Multichannel Window Size Field */ -#define DP_SP_WSIZE(x) BFIN_DEPOSIT(SP_WSIZE, x) -#define EX_SP_WSIZE(x) BFIN_EXTRACT(SP_WSIZE, x) - -/* SPORT_MCMC2 Masks */ -#define MCCRM 0x0003 /* Multichannel Clock Recovery Mode */ -#define REC_BYPASS 0x0000 /* Bypass Mode (No Clock Recovery) */ -#define REC_2FROM4 0x0002 /* Recover 2 MHz Clock from 4 MHz Clock */ -#define REC_8FROM16 0x0003 /* Recover 8 MHz Clock from 16 MHz Clock */ -#define MCDTXPE 0x0004 /* Multichannel DMA Transmit Packing */ -#define MCDRXPE 0x0008 /* Multichannel DMA Receive Packing */ -#define MCMEN 0x0010 /* Multichannel Frame Mode Enable */ -#define FSDR 0x0080 /* Multichannel Frame Sync to Data Relationship */ -#define MFD 0xF000 /* Multichannel Frame Delay */ -#define DP_MFD(x) BFIN_DEPOSIT(MFD, x) -#define EX_MFD(x) BFIN_EXTRACT(MFD, x) - -#endif diff --git a/arch/blackfin/include/asm/bfin_sport3.h b/arch/blackfin/include/asm/bfin_sport3.h new file mode 100644 index 00000000000..d82f5fa0ad9 --- /dev/null +++ b/arch/blackfin/include/asm/bfin_sport3.h @@ -0,0 +1,107 @@ +/* + * bfin_sport - Analog Devices BF6XX SPORT registers + * + * Copyright (c) 2012 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _BFIN_SPORT3_H_ +#define _BFIN_SPORT3_H_ + +#include <linux/types.h> + +#define SPORT_CTL_SPENPRI 0x00000001 /* Enable Primary Channel */ +#define SPORT_CTL_DTYPE 0x00000006 /* Data type select */ +#define SPORT_CTL_RJUSTIFY_ZFILL 0x00000000 /* DTYPE: MCM mode: Right-justify, zero-fill unused MSBs */ +#define SPORT_CTL_RJUSTIFY_SFILL 0x00000002 /* DTYPE: MCM mode: Right-justify, sign-extend unused MSBs */ +#define SPORT_CTL_USE_U_LAW 0x00000004 /* DTYPE: MCM mode: Compand using u-law */ +#define SPORT_CTL_USE_A_LAW 0x00000006 /* DTYPE: MCM mode: Compand using A-law */ +#define SPORT_CTL_LSBF 0x00000008 /* Serial bit endian select */ +#define SPORT_CTL_SLEN 0x000001F0 /* Serial Word length select */ +#define SPORT_CTL_PACK 0x00000200 /* 16-bit to 32-bit packing enable */ +#define SPORT_CTL_ICLK 0x00000400 /* Internal Clock Select */ +#define SPORT_CTL_OPMODE 0x00000800 /* Operation mode */ +#define SPORT_CTL_CKRE 0x00001000 /* Clock rising edge select */ +#define SPORT_CTL_FSR 0x00002000 /* Frame Sync required */ +#define SPORT_CTL_IFS 0x00004000 /* Internal Frame Sync select */ +#define SPORT_CTL_DIFS 0x00008000 /* Data-independent frame sync select */ +#define SPORT_CTL_LFS 0x00010000 /* Active low frame sync select */ +#define SPORT_CTL_LAFS 0x00020000 /* Late Transmit frame select */ +#define SPORT_CTL_RJUST 0x00040000 /* Right Justified mode select */ +#define SPORT_CTL_FSED 0x00080000 /* External frame sync edge select */ +#define SPORT_CTL_TFIEN 0x00100000 /* Transmit finish interrupt enable select */ +#define SPORT_CTL_GCLKEN 0x00200000 /* Gated clock mode select */ +#define SPORT_CTL_SPENSEC 0x01000000 /* Enable secondary channel */ +#define SPORT_CTL_SPTRAN 0x02000000 /* Data direction control */ +#define SPORT_CTL_DERRSEC 0x04000000 /* Secondary channel error status */ +#define SPORT_CTL_DXSSEC 0x18000000 /* Secondary channel data buffer status */ +#define SPORT_CTL_SEC_EMPTY 0x00000000 /* DXSSEC: Empty */ +#define SPORT_CTL_SEC_PART_FULL 0x10000000 /* DXSSEC: Partially full */ +#define SPORT_CTL_SEC_FULL 0x18000000 /* DXSSEC: Full */ +#define SPORT_CTL_DERRPRI 0x20000000 /* Primary channel error status */ +#define SPORT_CTL_DXSPRI 0xC0000000 /* Primary channel data buffer status */ +#define SPORT_CTL_PRM_EMPTY 0x00000000 /* DXSPRI: Empty */ +#define SPORT_CTL_PRM_PART_FULL 0x80000000 /* DXSPRI: Partially full */ +#define SPORT_CTL_PRM_FULL 0xC0000000 /* DXSPRI: Full */ + +#define SPORT_DIV_CLKDIV 0x0000FFFF /* Clock divisor */ +#define SPORT_DIV_FSDIV 0xFFFF0000 /* Frame sync divisor */ + +#define SPORT_MCTL_MCE 0x00000001 /* Multichannel enable */ +#define SPORT_MCTL_MCPDE 0x00000004 /* Multichannel data packing select */ +#define SPORT_MCTL_MFD 0x000000F0 /* Multichannel frame delay */ +#define SPORT_MCTL_WSIZE 0x00007F00 /* Number of multichannel slots */ +#define SPORT_MCTL_WOFFSET 0x03FF0000 /* Window offset size */ + +#define SPORT_CNT_CLKCNT 0x0000FFFF /* Current state of clk div counter */ +#define SPORT_CNT_FSDIVCNT 0xFFFF0000 /* Current state of frame div counter */ + +#define SPORT_ERR_DERRPMSK 0x00000001 /* Primary channel data error interrupt enable */ +#define SPORT_ERR_DERRSMSK 0x00000002 /* Secondary channel data error interrupt enable */ +#define SPORT_ERR_FSERRMSK 0x00000004 /* Frame sync error interrupt enable */ +#define SPORT_ERR_DERRPSTAT 0x00000010 /* Primary channel data error status */ +#define SPORT_ERR_DERRSSTAT 0x00000020 /* Secondary channel data error status */ +#define SPORT_ERR_FSERRSTAT 0x00000040 /* Frame sync error status */ + +#define SPORT_MSTAT_CURCHAN 0x000003FF /* Channel which is being serviced in the multichannel operation */ + +#define SPORT_CTL2_FSMUXSEL 0x00000001 /* Frame Sync MUX Select */ +#define SPORT_CTL2_CKMUXSEL 0x00000002 /* Clock MUX Select */ +#define SPORT_CTL2_LBSEL 0x00000004 /* Loopback Select */ + +struct sport_register { + u32 spctl; + u32 div; + u32 spmctl; + u32 spcs0; + u32 spcs1; + u32 spcs2; + u32 spcs3; + u32 spcnt; + u32 sperrctl; + u32 spmstat; + u32 spctl2; + u32 txa; + u32 rxa; + u32 txb; + u32 rxb; + u32 revid; +}; + +struct bfin_snd_platform_data { + const unsigned short *pin_req; +}; + +#endif diff --git a/arch/blackfin/include/asm/bfin_twi.h b/arch/blackfin/include/asm/bfin_twi.h index e767d649dfc..aaa0834d34a 100644 --- a/arch/blackfin/include/asm/bfin_twi.h +++ b/arch/blackfin/include/asm/bfin_twi.h @@ -9,37 +9,74 @@ #ifndef __ASM_BFIN_TWI_H__ #define __ASM_BFIN_TWI_H__ -#include <linux/types.h> +#include <asm/blackfin.h> -/* - * All Blackfin system MMRs are padded to 32bits even if the register - * itself is only 16bits. So use a helper macro to streamline this. - */ -#define __BFP(m) u16 m; u16 __pad_##m +#define DEFINE_TWI_REG(reg_name, reg) \ +static inline u16 read_##reg_name(struct bfin_twi_iface *iface) \ + { return bfin_read16(&iface->regs_base->reg); } \ +static inline void write_##reg_name(struct bfin_twi_iface *iface, u16 v) \ + { bfin_write16(&iface->regs_base->reg, v); } -/* - * bfin twi registers layout - */ -struct bfin_twi_regs { - __BFP(clkdiv); - __BFP(control); - __BFP(slave_ctl); - __BFP(slave_stat); - __BFP(slave_addr); - __BFP(master_ctl); - __BFP(master_stat); - __BFP(master_addr); - __BFP(int_stat); - __BFP(int_mask); - __BFP(fifo_ctl); - __BFP(fifo_stat); - u32 __pad[20]; - __BFP(xmt_data8); - __BFP(xmt_data16); - __BFP(rcv_data8); - __BFP(rcv_data16); -}; - -#undef __BFP +DEFINE_TWI_REG(CLKDIV, clkdiv) +DEFINE_TWI_REG(SLAVE_CTL, slave_ctl) +DEFINE_TWI_REG(SLAVE_STAT, slave_stat) +DEFINE_TWI_REG(SLAVE_ADDR, slave_addr) +DEFINE_TWI_REG(MASTER_CTL, master_ctl) +DEFINE_TWI_REG(MASTER_STAT, master_stat) +DEFINE_TWI_REG(MASTER_ADDR, master_addr) +DEFINE_TWI_REG(INT_STAT, int_stat) +DEFINE_TWI_REG(INT_MASK, int_mask) +DEFINE_TWI_REG(FIFO_STAT, fifo_stat) +DEFINE_TWI_REG(XMT_DATA8, xmt_data8) +DEFINE_TWI_REG(XMT_DATA16, xmt_data16) +#if !ANOMALY_16000030 +DEFINE_TWI_REG(RCV_DATA8, rcv_data8) +DEFINE_TWI_REG(RCV_DATA16, rcv_data16) +#else +static inline u16 read_RCV_DATA8(struct bfin_twi_iface *iface) +{ + u16 ret; + unsigned long flags; + + flags = hard_local_irq_save(); + ret = bfin_read16(&iface->regs_base->rcv_data8); + hard_local_irq_restore(flags); + + return ret; +} + +static inline u16 read_RCV_DATA16(struct bfin_twi_iface *iface) +{ + u16 ret; + unsigned long flags; + + flags = hard_local_irq_save(); + ret = bfin_read16(&iface->regs_base->rcv_data16); + hard_local_irq_restore(flags); + + return ret; +} +#endif + +static inline u16 read_FIFO_CTL(struct bfin_twi_iface *iface) +{ + return bfin_read16(&iface->regs_base->fifo_ctl); +} + +static inline void write_FIFO_CTL(struct bfin_twi_iface *iface, u16 v) +{ + bfin_write16(&iface->regs_base->fifo_ctl, v); + SSYNC(); +} + +static inline u16 read_CONTROL(struct bfin_twi_iface *iface) +{ + return bfin_read16(&iface->regs_base->control); +} +static inline void write_CONTROL(struct bfin_twi_iface *iface, u16 v) +{ + SSYNC(); + bfin_write16(&iface->regs_base->control, v); +} #endif diff --git a/arch/blackfin/include/asm/bitops.h b/arch/blackfin/include/asm/bitops.h index 8a0fed16058..b298b654a26 100644 --- a/arch/blackfin/include/asm/bitops.h +++ b/arch/blackfin/include/asm/bitops.h @@ -27,16 +27,13 @@ #include <asm-generic/bitops/ext2-atomic.h> +#include <asm/barrier.h> + #ifndef CONFIG_SMP #include <linux/irqflags.h> - /* * clear_bit may not imply a memory barrier */ -#ifndef smp_mb__before_clear_bit -#define smp_mb__before_clear_bit() smp_mb() -#define smp_mb__after_clear_bit() smp_mb() -#endif #include <asm-generic/bitops/atomic.h> #include <asm-generic/bitops/non-atomic.h> #else @@ -100,12 +97,6 @@ static inline int test_and_change_bit(int nr, volatile unsigned long *addr) return __raw_bit_test_toggle_asm(a, nr & 0x1f); } -/* - * clear_bit() doesn't provide any barrier for the compiler. - */ -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() - #define test_bit __skip_test_bit #include <asm-generic/bitops/non-atomic.h> #undef test_bit diff --git a/arch/blackfin/include/asm/blackfin.h b/arch/blackfin/include/asm/blackfin.h index 0928700b6bc..f111f366d75 100644 --- a/arch/blackfin/include/asm/blackfin.h +++ b/arch/blackfin/include/asm/blackfin.h @@ -17,22 +17,16 @@ static inline void SSYNC(void) { int _tmp; - if (ANOMALY_05000312) + if (ANOMALY_05000312 || ANOMALY_05000244) __asm__ __volatile__( "cli %0;" "nop;" "nop;" + "nop;" "ssync;" "sti %0;" : "=d" (_tmp) ); - else if (ANOMALY_05000244) - __asm__ __volatile__( - "nop;" - "nop;" - "nop;" - "ssync;" - ); else __asm__ __volatile__("ssync;"); } @@ -41,22 +35,16 @@ static inline void SSYNC(void) static inline void CSYNC(void) { int _tmp; - if (ANOMALY_05000312) + if (ANOMALY_05000312 || ANOMALY_05000244) __asm__ __volatile__( "cli %0;" "nop;" "nop;" + "nop;" "csync;" "sti %0;" : "=d" (_tmp) ); - else if (ANOMALY_05000244) - __asm__ __volatile__( - "nop;" - "nop;" - "nop;" - "csync;" - ); else __asm__ __volatile__("csync;"); } @@ -73,18 +61,22 @@ static inline void CSYNC(void) #define ssync(x) SSYNC(x) #define csync(x) CSYNC(x) -#if ANOMALY_05000312 -#define SSYNC(scratch) cli scratch; nop; nop; SSYNC; sti scratch; -#define CSYNC(scratch) cli scratch; nop; nop; CSYNC; sti scratch; +#if ANOMALY_05000312 || ANOMALY_05000244 +#define SSYNC(scratch) \ + cli scratch; \ + nop; nop; nop; \ + SSYNC; \ + sti scratch; -#elif ANOMALY_05000244 -#define SSYNC(scratch) nop; nop; nop; SSYNC; -#define CSYNC(scratch) nop; nop; nop; CSYNC; +#define CSYNC(scratch) \ + cli scratch; \ + nop; nop; nop; \ + CSYNC; \ + sti scratch; #else #define SSYNC(scratch) SSYNC; #define CSYNC(scratch) CSYNC; - #endif /* ANOMALY_05000312 & ANOMALY_05000244 handling */ #endif /* __ASSEMBLY__ */ diff --git a/arch/blackfin/include/asm/byteorder.h b/arch/blackfin/include/asm/byteorder.h deleted file mode 100644 index 9558416d578..00000000000 --- a/arch/blackfin/include/asm/byteorder.h +++ /dev/null @@ -1 +0,0 @@ -#include <linux/byteorder/little_endian.h> diff --git a/arch/blackfin/include/asm/clkdev.h b/arch/blackfin/include/asm/clkdev.h new file mode 100644 index 00000000000..7ac2436856a --- /dev/null +++ b/arch/blackfin/include/asm/clkdev.h @@ -0,0 +1,16 @@ +#ifndef __ASM_CLKDEV__H_ +#define __ASM_CLKDEV__H_ + +#include <linux/slab.h> + +static inline struct clk_lookup_alloc *__clkdev_alloc(size_t size) +{ + return kzalloc(size, GFP_KERNEL); +} + +#ifndef CONFIG_COMMON_CLK +#define __clk_put(clk) +#define __clk_get(clk) ({ 1; }) +#endif + +#endif diff --git a/arch/blackfin/include/asm/clocks.h b/arch/blackfin/include/asm/clocks.h index 6f0b61852f5..9b3c85b3c28 100644 --- a/arch/blackfin/include/asm/clocks.h +++ b/arch/blackfin/include/asm/clocks.h @@ -48,4 +48,27 @@ # define CONFIG_VCO_MULT 0 #endif +#include <linux/clk.h> + +struct clk_ops { + unsigned long (*get_rate)(struct clk *clk); + unsigned long (*round_rate)(struct clk *clk, unsigned long rate); + int (*set_rate)(struct clk *clk, unsigned long rate); + int (*enable)(struct clk *clk); + int (*disable)(struct clk *clk); +}; + +struct clk { + struct clk *parent; + const char *name; + unsigned long rate; + spinlock_t lock; + u32 flags; + const struct clk_ops *ops; + void __iomem *reg; + u32 mask; + u32 shift; +}; + +int clk_init(void); #endif diff --git a/arch/blackfin/include/asm/system.h b/arch/blackfin/include/asm/cmpxchg.h index 44bd0cced72..c05868cc61c 100644 --- a/arch/blackfin/include/asm/system.h +++ b/arch/blackfin/include/asm/cmpxchg.h @@ -1,31 +1,16 @@ /* - * Copyright 2004-2009 Analog Devices Inc. - * Tony Kou (tonyko@lineo.ca) + * Copyright 2004-2011 Analog Devices Inc. * - * Licensed under the GPL-2 or later + * Licensed under the GPL-2 or later. */ -#ifndef _BLACKFIN_SYSTEM_H -#define _BLACKFIN_SYSTEM_H +#ifndef __ARCH_BLACKFIN_CMPXCHG__ +#define __ARCH_BLACKFIN_CMPXCHG__ -#include <linux/linkage.h> -#include <linux/irqflags.h> -#include <mach/anomaly.h> -#include <asm/cache.h> -#include <asm/pda.h> -#include <asm/irq.h> +#ifdef CONFIG_SMP -/* - * Force strict CPU ordering. - */ -#define nop() __asm__ __volatile__ ("nop;\n\t" : : ) -#define smp_mb() mb() -#define smp_rmb() rmb() -#define smp_wmb() wmb() -#define set_mb(var, value) do { var = value; mb(); } while (0) -#define smp_read_barrier_depends() read_barrier_depends() +#include <linux/linkage.h> -#ifdef CONFIG_SMP asmlinkage unsigned long __raw_xchg_1_asm(volatile void *ptr, unsigned long value); asmlinkage unsigned long __raw_xchg_2_asm(volatile void *ptr, unsigned long value); asmlinkage unsigned long __raw_xchg_4_asm(volatile void *ptr, unsigned long value); @@ -36,19 +21,6 @@ asmlinkage unsigned long __raw_cmpxchg_2_asm(volatile void *ptr, asmlinkage unsigned long __raw_cmpxchg_4_asm(volatile void *ptr, unsigned long new, unsigned long old); -#ifdef __ARCH_SYNC_CORE_DCACHE -/* Force Core data cache coherence */ -# define mb() do { barrier(); smp_check_barrier(); smp_mark_barrier(); } while (0) -# define rmb() do { barrier(); smp_check_barrier(); } while (0) -# define wmb() do { barrier(); smp_mark_barrier(); } while (0) -# define read_barrier_depends() do { barrier(); smp_check_barrier(); } while (0) -#else -# define mb() barrier() -# define rmb() barrier() -# define wmb() barrier() -# define read_barrier_depends() do { } while (0) -#endif - static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size) { @@ -99,18 +71,14 @@ static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old, #else /* !CONFIG_SMP */ -#define mb() barrier() -#define rmb() barrier() -#define wmb() barrier() -#define read_barrier_depends() do { } while (0) +#include <mach/blackfin.h> +#include <asm/irqflags.h> struct __xchg_dummy { unsigned long a[100]; }; #define __xg(x) ((volatile struct __xchg_dummy *)(x)) -#include <mach/blackfin.h> - static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size) { @@ -154,39 +122,12 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, (unsigned long)(n), sizeof(*(ptr)))) #define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) -#include <asm-generic/cmpxchg.h> +#define cmpxchg(ptr, o, n) cmpxchg_local((ptr), (o), (n)) +#define cmpxchg64(ptr, o, n) cmpxchg64_local((ptr), (o), (n)) #endif /* !CONFIG_SMP */ #define xchg(ptr, x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr)))) #define tas(ptr) ((void)xchg((ptr), 1)) -#define prepare_to_switch() do { } while(0) - -/* - * switch_to(n) should switch tasks to task ptr, first checking that - * ptr isn't the current task, in which case it does nothing. - */ - -#include <asm/l1layout.h> -#include <asm/mem_map.h> - -asmlinkage struct task_struct *resume(struct task_struct *prev, struct task_struct *next); - -#ifndef CONFIG_SMP -#define switch_to(prev,next,last) \ -do { \ - memcpy (&task_thread_info(prev)->l1_task_info, L1_SCRATCH_TASK_INFO, \ - sizeof *L1_SCRATCH_TASK_INFO); \ - memcpy (L1_SCRATCH_TASK_INFO, &task_thread_info(next)->l1_task_info, \ - sizeof *L1_SCRATCH_TASK_INFO); \ - (last) = resume (prev, next); \ -} while (0) -#else -#define switch_to(prev, next, last) \ -do { \ - (last) = resume(prev, next); \ -} while (0) -#endif - -#endif /* _BLACKFIN_SYSTEM_H */ +#endif /* __ARCH_BLACKFIN_CMPXCHG__ */ diff --git a/arch/blackfin/include/asm/context.S b/arch/blackfin/include/asm/context.S index 1f9060395a0..507e7aa6a56 100644 --- a/arch/blackfin/include/asm/context.S +++ b/arch/blackfin/include/asm/context.S @@ -396,3 +396,12 @@ call \func; #endif .endm + +#if defined(CONFIG_BFIN_SCRATCH_REG_RETN) +# define EX_SCRATCH_REG RETN +#elif defined(CONFIG_BFIN_SCRATCH_REG_RETE) +# define EX_SCRATCH_REG RETE +#else +# define EX_SCRATCH_REG CYCLES +#endif + diff --git a/arch/blackfin/include/asm/cplb.h b/arch/blackfin/include/asm/cplb.h index fda96261ed6..5c37f620c4b 100644 --- a/arch/blackfin/include/asm/cplb.h +++ b/arch/blackfin/include/asm/cplb.h @@ -62,6 +62,10 @@ #define SIZE_4K 0x00001000 /* 4K */ #define SIZE_1M 0x00100000 /* 1M */ #define SIZE_4M 0x00400000 /* 4M */ +#define SIZE_16K 0x00004000 /* 16K */ +#define SIZE_64K 0x00010000 /* 64K */ +#define SIZE_16M 0x01000000 /* 16M */ +#define SIZE_64M 0x04000000 /* 64M */ #define MAX_CPLBS 16 diff --git a/arch/blackfin/include/asm/def_LPBlackfin.h b/arch/blackfin/include/asm/def_LPBlackfin.h index 82367901145..c5c8d8a3a5f 100644 --- a/arch/blackfin/include/asm/def_LPBlackfin.h +++ b/arch/blackfin/include/asm/def_LPBlackfin.h @@ -3,7 +3,7 @@ * * Copyright 2005-2008 Analog Devices Inc. * - * Licensed under the ADI BSD license or GPL-2 (or later). + * Licensed under the Clear BSD license or GPL-2 (or later). */ #ifndef _DEF_LPBLACKFIN_H @@ -544,6 +544,7 @@ do { \ #define DCBS_P 0x04 /* L1 Data Cache Bank Select */ #define PORT_PREF0_P 0x12 /* DAG0 Port Preference */ #define PORT_PREF1_P 0x13 /* DAG1 Port Preference */ +#define RDCHK 0x9 /* Enable L1 Parity Check */ /* Masks */ #define ENDM 0x00000001 /* (doesn't really exist) Enable @@ -622,6 +623,12 @@ do { \ #define PAGE_SIZE_4KB 0x00010000 /* 4 KB page size */ #define PAGE_SIZE_1MB 0x00020000 /* 1 MB page size */ #define PAGE_SIZE_4MB 0x00030000 /* 4 MB page size */ +#ifdef CONFIG_BF60x +#define PAGE_SIZE_16KB 0x00040000 /* 16 KB page size */ +#define PAGE_SIZE_64KB 0x00050000 /* 64 KB page size */ +#define PAGE_SIZE_16MB 0x00060000 /* 16 MB page size */ +#define PAGE_SIZE_64MB 0x00070000 /* 64 MB page size */ +#endif #define CPLB_L1SRAM 0x00000020 /* 0=SRAM mapped in L1, 0=SRAM not * mapped to L1 */ diff --git a/arch/blackfin/include/asm/dma-mapping.h b/arch/blackfin/include/asm/dma-mapping.h index bbf461076a0..054d9ec57d9 100644 --- a/arch/blackfin/include/asm/dma-mapping.h +++ b/arch/blackfin/include/asm/dma-mapping.h @@ -154,4 +154,14 @@ dma_cache_sync(struct device *dev, void *vaddr, size_t size, _dma_sync((dma_addr_t)vaddr, size, dir); } +/* drivers/base/dma-mapping.c */ +extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma, + void *cpu_addr, dma_addr_t dma_addr, size_t size); +extern int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt, + void *cpu_addr, dma_addr_t dma_addr, + size_t size); + +#define dma_mmap_coherent(d, v, c, h, s) dma_common_mmap(d, v, c, h, s) +#define dma_get_sgtable(d, t, v, h, s) dma_common_get_sgtable(d, t, v, h, s) + #endif /* _BLACKFIN_DMA_MAPPING_H */ diff --git a/arch/blackfin/include/asm/dma.h b/arch/blackfin/include/asm/dma.h index dac0c97242b..40e9c2bbc6e 100644 --- a/arch/blackfin/include/asm/dma.h +++ b/arch/blackfin/include/asm/dma.h @@ -22,12 +22,22 @@ #define DATA_SIZE_8 0 #define DATA_SIZE_16 1 #define DATA_SIZE_32 2 +#ifdef CONFIG_BF60x +#define DATA_SIZE_64 3 +#endif #define DMA_FLOW_STOP 0 #define DMA_FLOW_AUTO 1 +#ifdef CONFIG_BF60x +#define DMA_FLOW_LIST 4 +#define DMA_FLOW_ARRAY 5 +#define DMA_FLOW_LIST_DEMAND 6 +#define DMA_FLOW_ARRAY_DEMAND 7 +#else #define DMA_FLOW_ARRAY 4 #define DMA_FLOW_SMALL 6 #define DMA_FLOW_LARGE 7 +#endif #define DIMENSION_LINEAR 0 #define DIMENSION_2D 1 @@ -36,26 +46,80 @@ #define DIR_WRITE 1 #define INTR_DISABLE 0 +#ifdef CONFIG_BF60x +#define INTR_ON_PERI 1 +#endif #define INTR_ON_BUF 2 #define INTR_ON_ROW 3 #define DMA_NOSYNC_KEEP_DMA_BUF 0 #define DMA_SYNC_RESTART 1 +#ifdef DMA_MMR_SIZE_32 +#define DMA_MMR_SIZE_TYPE long +#define DMA_MMR_READ bfin_read32 +#define DMA_MMR_WRITE bfin_write32 +#else +#define DMA_MMR_SIZE_TYPE short +#define DMA_MMR_READ bfin_read16 +#define DMA_MMR_WRITE bfin_write16 +#endif + +struct dma_desc_array { + unsigned long start_addr; + unsigned DMA_MMR_SIZE_TYPE cfg; + unsigned DMA_MMR_SIZE_TYPE x_count; + DMA_MMR_SIZE_TYPE x_modify; +} __attribute__((packed)); + struct dmasg { void *next_desc_addr; unsigned long start_addr; - unsigned short cfg; - unsigned short x_count; - short x_modify; - unsigned short y_count; - short y_modify; + unsigned DMA_MMR_SIZE_TYPE cfg; + unsigned DMA_MMR_SIZE_TYPE x_count; + DMA_MMR_SIZE_TYPE x_modify; + unsigned DMA_MMR_SIZE_TYPE y_count; + DMA_MMR_SIZE_TYPE y_modify; } __attribute__((packed)); struct dma_register { void *next_desc_ptr; /* DMA Next Descriptor Pointer register */ unsigned long start_addr; /* DMA Start address register */ +#ifdef CONFIG_BF60x + unsigned long cfg; /* DMA Configuration register */ + unsigned long x_count; /* DMA x_count register */ + + long x_modify; /* DMA x_modify register */ + + unsigned long y_count; /* DMA y_count register */ + + long y_modify; /* DMA y_modify register */ + + unsigned long reserved; + unsigned long reserved2; + + void *curr_desc_ptr; /* DMA Current Descriptor Pointer + register */ + void *prev_desc_ptr; /* DMA previous initial Descriptor Pointer + register */ + unsigned long curr_addr_ptr; /* DMA Current Address Pointer + register */ + unsigned long irq_status; /* DMA irq status register */ + + unsigned long curr_x_count; /* DMA Current x-count register */ + + unsigned long curr_y_count; /* DMA Current y-count register */ + + unsigned long reserved3; + + unsigned long bw_limit_count; /* DMA band width limit count register */ + unsigned long curr_bw_limit_count; /* DMA Current band width limit + count register */ + unsigned long bw_monitor_count; /* DMA band width limit count register */ + unsigned long curr_bw_monitor_count; /* DMA Current band width limit + count register */ +#else unsigned short cfg; /* DMA Configuration register */ unsigned short dummy1; /* DMA Configuration register */ @@ -92,6 +156,7 @@ struct dma_register { unsigned short dummy9; unsigned long reserved3; +#endif }; @@ -131,23 +196,23 @@ static inline void set_dma_curr_desc_addr(unsigned int channel, void *addr) { dma_ch[channel].regs->curr_desc_ptr = addr; } -static inline void set_dma_x_count(unsigned int channel, unsigned short x_count) +static inline void set_dma_x_count(unsigned int channel, unsigned DMA_MMR_SIZE_TYPE x_count) { dma_ch[channel].regs->x_count = x_count; } -static inline void set_dma_y_count(unsigned int channel, unsigned short y_count) +static inline void set_dma_y_count(unsigned int channel, unsigned DMA_MMR_SIZE_TYPE y_count) { dma_ch[channel].regs->y_count = y_count; } -static inline void set_dma_x_modify(unsigned int channel, short x_modify) +static inline void set_dma_x_modify(unsigned int channel, DMA_MMR_SIZE_TYPE x_modify) { dma_ch[channel].regs->x_modify = x_modify; } -static inline void set_dma_y_modify(unsigned int channel, short y_modify) +static inline void set_dma_y_modify(unsigned int channel, DMA_MMR_SIZE_TYPE y_modify) { dma_ch[channel].regs->y_modify = y_modify; } -static inline void set_dma_config(unsigned int channel, unsigned short config) +static inline void set_dma_config(unsigned int channel, unsigned DMA_MMR_SIZE_TYPE config) { dma_ch[channel].regs->cfg = config; } @@ -156,23 +221,55 @@ static inline void set_dma_curr_addr(unsigned int channel, unsigned long addr) dma_ch[channel].regs->curr_addr_ptr = addr; } -static inline unsigned short +#ifdef CONFIG_BF60x +static inline unsigned long +set_bfin_dma_config2(char direction, char flow_mode, char intr_mode, + char dma_mode, char mem_width, char syncmode, char peri_width) +{ + unsigned long config = 0; + + switch (intr_mode) { + case INTR_ON_BUF: + if (dma_mode == DIMENSION_2D) + config = DI_EN_Y; + else + config = DI_EN_X; + break; + case INTR_ON_ROW: + config = DI_EN_X; + break; + case INTR_ON_PERI: + config = DI_EN_P; + break; + }; + + return config | (direction << 1) | (mem_width << 8) | (dma_mode << 26) | + (flow_mode << 12) | (syncmode << 2) | (peri_width << 4); +} +#endif + +static inline unsigned DMA_MMR_SIZE_TYPE set_bfin_dma_config(char direction, char flow_mode, - char intr_mode, char dma_mode, char width, char syncmode) + char intr_mode, char dma_mode, char mem_width, char syncmode) { - return (direction << 1) | (width << 2) | (dma_mode << 4) | +#ifdef CONFIG_BF60x + return set_bfin_dma_config2(direction, flow_mode, intr_mode, dma_mode, + mem_width, syncmode, mem_width); +#else + return (direction << 1) | (mem_width << 2) | (dma_mode << 4) | (intr_mode << 6) | (flow_mode << 12) | (syncmode << 5); +#endif } -static inline unsigned short get_dma_curr_irqstat(unsigned int channel) +static inline unsigned DMA_MMR_SIZE_TYPE get_dma_curr_irqstat(unsigned int channel) { return dma_ch[channel].regs->irq_status; } -static inline unsigned short get_dma_curr_xcount(unsigned int channel) +static inline unsigned DMA_MMR_SIZE_TYPE get_dma_curr_xcount(unsigned int channel) { return dma_ch[channel].regs->curr_x_count; } -static inline unsigned short get_dma_curr_ycount(unsigned int channel) +static inline unsigned DMA_MMR_SIZE_TYPE get_dma_curr_ycount(unsigned int channel) { return dma_ch[channel].regs->curr_y_count; } @@ -184,7 +281,7 @@ static inline void *get_dma_curr_desc_ptr(unsigned int channel) { return dma_ch[channel].regs->curr_desc_ptr; } -static inline unsigned short get_dma_config(unsigned int channel) +static inline unsigned DMA_MMR_SIZE_TYPE get_dma_config(unsigned int channel) { return dma_ch[channel].regs->cfg; } @@ -203,8 +300,8 @@ static inline void set_dma_sg(unsigned int channel, struct dmasg *sg, int ndsize dma_ch[channel].regs->next_desc_ptr = sg; dma_ch[channel].regs->cfg = - (dma_ch[channel].regs->cfg & ~(0xf << 8)) | - ((ndsize & 0xf) << 8); + (dma_ch[channel].regs->cfg & ~NDSIZE) | + ((ndsize << NDSIZE_OFFSET) & NDSIZE); } static inline int dma_channel_active(unsigned int channel) @@ -239,7 +336,7 @@ static inline void dma_enable_irq(unsigned int channel) } static inline void clear_dma_irqstat(unsigned int channel) { - dma_ch[channel].regs->irq_status = DMA_DONE | DMA_ERR; + dma_ch[channel].regs->irq_status = DMA_DONE | DMA_ERR | DMA_PIRQ; } void *dma_memcpy(void *dest, const void *src, size_t count); diff --git a/arch/blackfin/include/asm/dpmc.h b/arch/blackfin/include/asm/dpmc.h index c4ec959dad7..2673b11376f 100644 --- a/arch/blackfin/include/asm/dpmc.h +++ b/arch/blackfin/include/asm/dpmc.h @@ -9,6 +9,651 @@ #ifndef _BLACKFIN_DPMC_H_ #define _BLACKFIN_DPMC_H_ +#ifdef __ASSEMBLY__ +#define PM_REG0 R7 +#define PM_REG1 R6 +#define PM_REG2 R5 +#define PM_REG3 R4 +#define PM_REG4 R3 +#define PM_REG5 R2 +#define PM_REG6 R1 +#define PM_REG7 R0 +#define PM_REG8 P5 +#define PM_REG9 P4 +#define PM_REG10 P3 +#define PM_REG11 P2 +#define PM_REG12 P1 +#define PM_REG13 P0 + +#define PM_REGSET0 R7:7 +#define PM_REGSET1 R7:6 +#define PM_REGSET2 R7:5 +#define PM_REGSET3 R7:4 +#define PM_REGSET4 R7:3 +#define PM_REGSET5 R7:2 +#define PM_REGSET6 R7:1 +#define PM_REGSET7 R7:0 +#define PM_REGSET8 R7:0, P5:5 +#define PM_REGSET9 R7:0, P5:4 +#define PM_REGSET10 R7:0, P5:3 +#define PM_REGSET11 R7:0, P5:2 +#define PM_REGSET12 R7:0, P5:1 +#define PM_REGSET13 R7:0, P5:0 + +#define _PM_PUSH(n, x, w, base) PM_REG##n = w[FP + ((x) - (base))]; +#define _PM_POP(n, x, w, base) w[FP + ((x) - (base))] = PM_REG##n; +#define PM_PUSH_SYNC(n) [--sp] = (PM_REGSET##n); +#define PM_POP_SYNC(n) (PM_REGSET##n) = [sp++]; +#define PM_PUSH(n, x) PM_REG##n = [FP++]; +#define PM_POP(n, x) [FP--] = PM_REG##n; +#define PM_CORE_PUSH(n, x) _PM_PUSH(n, x, , COREMMR_BASE) +#define PM_CORE_POP(n, x) _PM_POP(n, x, , COREMMR_BASE) +#define PM_SYS_PUSH(n, x) _PM_PUSH(n, x, , SYSMMR_BASE) +#define PM_SYS_POP(n, x) _PM_POP(n, x, , SYSMMR_BASE) +#define PM_SYS_PUSH16(n, x) _PM_PUSH(n, x, w, SYSMMR_BASE) +#define PM_SYS_POP16(n, x) _PM_POP(n, x, w, SYSMMR_BASE) + + .macro bfin_init_pm_bench_cycles +#ifdef CONFIG_BFIN_PM_WAKEUP_TIME_BENCH + R4 = 0; + CYCLES = R4; + CYCLES2 = R4; + R4 = SYSCFG; + BITSET(R4, 1); + SYSCFG = R4; +#endif + .endm + + .macro bfin_cpu_reg_save + /* + * Save the core regs early so we can blow them away when + * saving/restoring MMR states + */ + [--sp] = (R7:0, P5:0); + [--sp] = fp; + [--sp] = usp; + + [--sp] = i0; + [--sp] = i1; + [--sp] = i2; + [--sp] = i3; + + [--sp] = m0; + [--sp] = m1; + [--sp] = m2; + [--sp] = m3; + + [--sp] = l0; + [--sp] = l1; + [--sp] = l2; + [--sp] = l3; + + [--sp] = b0; + [--sp] = b1; + [--sp] = b2; + [--sp] = b3; + [--sp] = a0.x; + [--sp] = a0.w; + [--sp] = a1.x; + [--sp] = a1.w; + + [--sp] = LC0; + [--sp] = LC1; + [--sp] = LT0; + [--sp] = LT1; + [--sp] = LB0; + [--sp] = LB1; + + /* We can't push RETI directly as that'll change IPEND[4] */ + r7 = RETI; + [--sp] = RETS; + [--sp] = ASTAT; +#ifndef CONFIG_BFIN_PM_WAKEUP_TIME_BENCH + [--sp] = CYCLES; + [--sp] = CYCLES2; +#endif + [--sp] = SYSCFG; + [--sp] = RETX; + [--sp] = SEQSTAT; + [--sp] = r7; + + /* Save first func arg in M3 */ + M3 = R0; + .endm + + .macro bfin_cpu_reg_restore + /* Restore Core Registers */ + RETI = [sp++]; + SEQSTAT = [sp++]; + RETX = [sp++]; + SYSCFG = [sp++]; +#ifndef CONFIG_BFIN_PM_WAKEUP_TIME_BENCH + CYCLES2 = [sp++]; + CYCLES = [sp++]; +#endif + ASTAT = [sp++]; + RETS = [sp++]; + + LB1 = [sp++]; + LB0 = [sp++]; + LT1 = [sp++]; + LT0 = [sp++]; + LC1 = [sp++]; + LC0 = [sp++]; + + a1.w = [sp++]; + a1.x = [sp++]; + a0.w = [sp++]; + a0.x = [sp++]; + b3 = [sp++]; + b2 = [sp++]; + b1 = [sp++]; + b0 = [sp++]; + + l3 = [sp++]; + l2 = [sp++]; + l1 = [sp++]; + l0 = [sp++]; + + m3 = [sp++]; + m2 = [sp++]; + m1 = [sp++]; + m0 = [sp++]; + + i3 = [sp++]; + i2 = [sp++]; + i1 = [sp++]; + i0 = [sp++]; + + usp = [sp++]; + fp = [sp++]; + (R7:0, P5:0) = [sp++]; + + .endm + + .macro bfin_sys_mmr_save + /* Save system MMRs */ + FP.H = hi(SYSMMR_BASE); + FP.L = lo(SYSMMR_BASE); +#ifdef SIC_IMASK0 + PM_SYS_PUSH(0, SIC_IMASK0) + PM_SYS_PUSH(1, SIC_IMASK1) +# ifdef SIC_IMASK2 + PM_SYS_PUSH(2, SIC_IMASK2) +# endif +#else +# ifdef SIC_IMASK + PM_SYS_PUSH(0, SIC_IMASK) +# endif +#endif + +#ifdef SIC_IAR0 + PM_SYS_PUSH(3, SIC_IAR0) + PM_SYS_PUSH(4, SIC_IAR1) + PM_SYS_PUSH(5, SIC_IAR2) +#endif +#ifdef SIC_IAR3 + PM_SYS_PUSH(6, SIC_IAR3) +#endif +#ifdef SIC_IAR4 + PM_SYS_PUSH(7, SIC_IAR4) + PM_SYS_PUSH(8, SIC_IAR5) + PM_SYS_PUSH(9, SIC_IAR6) +#endif +#ifdef SIC_IAR7 + PM_SYS_PUSH(10, SIC_IAR7) +#endif +#ifdef SIC_IAR8 + PM_SYS_PUSH(11, SIC_IAR8) + PM_SYS_PUSH(12, SIC_IAR9) + PM_SYS_PUSH(13, SIC_IAR10) +#endif + PM_PUSH_SYNC(13) +#ifdef SIC_IAR11 + PM_SYS_PUSH(0, SIC_IAR11) +#endif + +#ifdef SIC_IWR + PM_SYS_PUSH(1, SIC_IWR) +#endif +#ifdef SIC_IWR0 + PM_SYS_PUSH(1, SIC_IWR0) +#endif +#ifdef SIC_IWR1 + PM_SYS_PUSH(2, SIC_IWR1) +#endif +#ifdef SIC_IWR2 + PM_SYS_PUSH(3, SIC_IWR2) +#endif + +#ifdef PINT0_ASSIGN + PM_SYS_PUSH(4, PINT0_MASK_SET) + PM_SYS_PUSH(5, PINT1_MASK_SET) + PM_SYS_PUSH(6, PINT2_MASK_SET) + PM_SYS_PUSH(7, PINT3_MASK_SET) + PM_SYS_PUSH(8, PINT0_ASSIGN) + PM_SYS_PUSH(9, PINT1_ASSIGN) + PM_SYS_PUSH(10, PINT2_ASSIGN) + PM_SYS_PUSH(11, PINT3_ASSIGN) + PM_SYS_PUSH(12, PINT0_INVERT_SET) + PM_SYS_PUSH(13, PINT1_INVERT_SET) + PM_PUSH_SYNC(13) + PM_SYS_PUSH(0, PINT2_INVERT_SET) + PM_SYS_PUSH(1, PINT3_INVERT_SET) + PM_SYS_PUSH(2, PINT0_EDGE_SET) + PM_SYS_PUSH(3, PINT1_EDGE_SET) + PM_SYS_PUSH(4, PINT2_EDGE_SET) + PM_SYS_PUSH(5, PINT3_EDGE_SET) +#endif + +#ifdef SYSCR + PM_SYS_PUSH16(6, SYSCR) +#endif + +#ifdef EBIU_AMGCTL + PM_SYS_PUSH16(7, EBIU_AMGCTL) + PM_SYS_PUSH(8, EBIU_AMBCTL0) + PM_SYS_PUSH(9, EBIU_AMBCTL1) +#endif +#ifdef EBIU_FCTL + PM_SYS_PUSH(10, EBIU_MBSCTL) + PM_SYS_PUSH(11, EBIU_MODE) + PM_SYS_PUSH(12, EBIU_FCTL) + PM_PUSH_SYNC(12) +#else + PM_PUSH_SYNC(9) +#endif + .endm + + + .macro bfin_sys_mmr_restore +/* Restore System MMRs */ + FP.H = hi(SYSMMR_BASE); + FP.L = lo(SYSMMR_BASE); + +#ifdef EBIU_FCTL + PM_POP_SYNC(12) + PM_SYS_POP(12, EBIU_FCTL) + PM_SYS_POP(11, EBIU_MODE) + PM_SYS_POP(10, EBIU_MBSCTL) +#else + PM_POP_SYNC(9) +#endif + +#ifdef EBIU_AMGCTL + PM_SYS_POP(9, EBIU_AMBCTL1) + PM_SYS_POP(8, EBIU_AMBCTL0) + PM_SYS_POP16(7, EBIU_AMGCTL) +#endif + +#ifdef SYSCR + PM_SYS_POP16(6, SYSCR) +#endif + +#ifdef PINT0_ASSIGN + PM_SYS_POP(5, PINT3_EDGE_SET) + PM_SYS_POP(4, PINT2_EDGE_SET) + PM_SYS_POP(3, PINT1_EDGE_SET) + PM_SYS_POP(2, PINT0_EDGE_SET) + PM_SYS_POP(1, PINT3_INVERT_SET) + PM_SYS_POP(0, PINT2_INVERT_SET) + PM_POP_SYNC(13) + PM_SYS_POP(13, PINT1_INVERT_SET) + PM_SYS_POP(12, PINT0_INVERT_SET) + PM_SYS_POP(11, PINT3_ASSIGN) + PM_SYS_POP(10, PINT2_ASSIGN) + PM_SYS_POP(9, PINT1_ASSIGN) + PM_SYS_POP(8, PINT0_ASSIGN) + PM_SYS_POP(7, PINT3_MASK_SET) + PM_SYS_POP(6, PINT2_MASK_SET) + PM_SYS_POP(5, PINT1_MASK_SET) + PM_SYS_POP(4, PINT0_MASK_SET) +#endif + +#ifdef SIC_IWR2 + PM_SYS_POP(3, SIC_IWR2) +#endif +#ifdef SIC_IWR1 + PM_SYS_POP(2, SIC_IWR1) +#endif +#ifdef SIC_IWR0 + PM_SYS_POP(1, SIC_IWR0) +#endif +#ifdef SIC_IWR + PM_SYS_POP(1, SIC_IWR) +#endif + +#ifdef SIC_IAR11 + PM_SYS_POP(0, SIC_IAR11) +#endif + PM_POP_SYNC(13) +#ifdef SIC_IAR8 + PM_SYS_POP(13, SIC_IAR10) + PM_SYS_POP(12, SIC_IAR9) + PM_SYS_POP(11, SIC_IAR8) +#endif +#ifdef SIC_IAR7 + PM_SYS_POP(10, SIC_IAR7) +#endif +#ifdef SIC_IAR6 + PM_SYS_POP(9, SIC_IAR6) + PM_SYS_POP(8, SIC_IAR5) + PM_SYS_POP(7, SIC_IAR4) +#endif +#ifdef SIC_IAR3 + PM_SYS_POP(6, SIC_IAR3) +#endif +#ifdef SIC_IAR0 + PM_SYS_POP(5, SIC_IAR2) + PM_SYS_POP(4, SIC_IAR1) + PM_SYS_POP(3, SIC_IAR0) +#endif +#ifdef SIC_IMASK0 +# ifdef SIC_IMASK2 + PM_SYS_POP(2, SIC_IMASK2) +# endif + PM_SYS_POP(1, SIC_IMASK1) + PM_SYS_POP(0, SIC_IMASK0) +#else +# ifdef SIC_IMASK + PM_SYS_POP(0, SIC_IMASK) +# endif +#endif + .endm + + .macro bfin_core_mmr_save + /* Save Core MMRs */ + I0.H = hi(COREMMR_BASE); + I0.L = lo(COREMMR_BASE); + I1 = I0; + I2 = I0; + I3 = I0; + B0 = I0; + B1 = I0; + B2 = I0; + B3 = I0; + I1.L = lo(DCPLB_ADDR0); + I2.L = lo(DCPLB_DATA0); + I3.L = lo(ICPLB_ADDR0); + B0.L = lo(ICPLB_DATA0); + B1.L = lo(EVT2); + B2.L = lo(IMASK); + B3.L = lo(TCNTL); + + /* Event Vectors */ + FP = B1; + PM_PUSH(0, EVT2) + PM_PUSH(1, EVT3) + FP += 4; /* EVT4 */ + PM_PUSH(2, EVT5) + PM_PUSH(3, EVT6) + PM_PUSH(4, EVT7) + PM_PUSH(5, EVT8) + PM_PUSH_SYNC(5) + + PM_PUSH(0, EVT9) + PM_PUSH(1, EVT10) + PM_PUSH(2, EVT11) + PM_PUSH(3, EVT12) + PM_PUSH(4, EVT13) + PM_PUSH(5, EVT14) + PM_PUSH(6, EVT15) + + /* CEC */ + FP = B2; + PM_PUSH(7, IMASK) + FP += 4; /* IPEND */ + PM_PUSH(8, ILAT) + PM_PUSH(9, IPRIO) + + /* Core Timer */ + FP = B3; + PM_PUSH(10, TCNTL) + PM_PUSH(11, TPERIOD) + PM_PUSH(12, TSCALE) + PM_PUSH(13, TCOUNT) + PM_PUSH_SYNC(13) + + /* Misc non-contiguous registers */ + FP = I0; + PM_CORE_PUSH(0, DMEM_CONTROL); + PM_CORE_PUSH(1, IMEM_CONTROL); + PM_CORE_PUSH(2, TBUFCTL); + PM_PUSH_SYNC(2) + + /* DCPLB Addr */ + FP = I1; + PM_PUSH(0, DCPLB_ADDR0) + PM_PUSH(1, DCPLB_ADDR1) + PM_PUSH(2, DCPLB_ADDR2) + PM_PUSH(3, DCPLB_ADDR3) + PM_PUSH(4, DCPLB_ADDR4) + PM_PUSH(5, DCPLB_ADDR5) + PM_PUSH(6, DCPLB_ADDR6) + PM_PUSH(7, DCPLB_ADDR7) + PM_PUSH(8, DCPLB_ADDR8) + PM_PUSH(9, DCPLB_ADDR9) + PM_PUSH(10, DCPLB_ADDR10) + PM_PUSH(11, DCPLB_ADDR11) + PM_PUSH(12, DCPLB_ADDR12) + PM_PUSH(13, DCPLB_ADDR13) + PM_PUSH_SYNC(13) + PM_PUSH(0, DCPLB_ADDR14) + PM_PUSH(1, DCPLB_ADDR15) + + /* DCPLB Data */ + FP = I2; + PM_PUSH(2, DCPLB_DATA0) + PM_PUSH(3, DCPLB_DATA1) + PM_PUSH(4, DCPLB_DATA2) + PM_PUSH(5, DCPLB_DATA3) + PM_PUSH(6, DCPLB_DATA4) + PM_PUSH(7, DCPLB_DATA5) + PM_PUSH(8, DCPLB_DATA6) + PM_PUSH(9, DCPLB_DATA7) + PM_PUSH(10, DCPLB_DATA8) + PM_PUSH(11, DCPLB_DATA9) + PM_PUSH(12, DCPLB_DATA10) + PM_PUSH(13, DCPLB_DATA11) + PM_PUSH_SYNC(13) + PM_PUSH(0, DCPLB_DATA12) + PM_PUSH(1, DCPLB_DATA13) + PM_PUSH(2, DCPLB_DATA14) + PM_PUSH(3, DCPLB_DATA15) + + /* ICPLB Addr */ + FP = I3; + PM_PUSH(4, ICPLB_ADDR0) + PM_PUSH(5, ICPLB_ADDR1) + PM_PUSH(6, ICPLB_ADDR2) + PM_PUSH(7, ICPLB_ADDR3) + PM_PUSH(8, ICPLB_ADDR4) + PM_PUSH(9, ICPLB_ADDR5) + PM_PUSH(10, ICPLB_ADDR6) + PM_PUSH(11, ICPLB_ADDR7) + PM_PUSH(12, ICPLB_ADDR8) + PM_PUSH(13, ICPLB_ADDR9) + PM_PUSH_SYNC(13) + PM_PUSH(0, ICPLB_ADDR10) + PM_PUSH(1, ICPLB_ADDR11) + PM_PUSH(2, ICPLB_ADDR12) + PM_PUSH(3, ICPLB_ADDR13) + PM_PUSH(4, ICPLB_ADDR14) + PM_PUSH(5, ICPLB_ADDR15) + + /* ICPLB Data */ + FP = B0; + PM_PUSH(6, ICPLB_DATA0) + PM_PUSH(7, ICPLB_DATA1) + PM_PUSH(8, ICPLB_DATA2) + PM_PUSH(9, ICPLB_DATA3) + PM_PUSH(10, ICPLB_DATA4) + PM_PUSH(11, ICPLB_DATA5) + PM_PUSH(12, ICPLB_DATA6) + PM_PUSH(13, ICPLB_DATA7) + PM_PUSH_SYNC(13) + PM_PUSH(0, ICPLB_DATA8) + PM_PUSH(1, ICPLB_DATA9) + PM_PUSH(2, ICPLB_DATA10) + PM_PUSH(3, ICPLB_DATA11) + PM_PUSH(4, ICPLB_DATA12) + PM_PUSH(5, ICPLB_DATA13) + PM_PUSH(6, ICPLB_DATA14) + PM_PUSH(7, ICPLB_DATA15) + PM_PUSH_SYNC(7) + .endm + + .macro bfin_core_mmr_restore + /* Restore Core MMRs */ + I0.H = hi(COREMMR_BASE); + I0.L = lo(COREMMR_BASE); + I1 = I0; + I2 = I0; + I3 = I0; + B0 = I0; + B1 = I0; + B2 = I0; + B3 = I0; + I1.L = lo(DCPLB_ADDR15); + I2.L = lo(DCPLB_DATA15); + I3.L = lo(ICPLB_ADDR15); + B0.L = lo(ICPLB_DATA15); + B1.L = lo(EVT15); + B2.L = lo(IPRIO); + B3.L = lo(TCOUNT); + + /* ICPLB Data */ + FP = B0; + PM_POP_SYNC(7) + PM_POP(7, ICPLB_DATA15) + PM_POP(6, ICPLB_DATA14) + PM_POP(5, ICPLB_DATA13) + PM_POP(4, ICPLB_DATA12) + PM_POP(3, ICPLB_DATA11) + PM_POP(2, ICPLB_DATA10) + PM_POP(1, ICPLB_DATA9) + PM_POP(0, ICPLB_DATA8) + PM_POP_SYNC(13) + PM_POP(13, ICPLB_DATA7) + PM_POP(12, ICPLB_DATA6) + PM_POP(11, ICPLB_DATA5) + PM_POP(10, ICPLB_DATA4) + PM_POP(9, ICPLB_DATA3) + PM_POP(8, ICPLB_DATA2) + PM_POP(7, ICPLB_DATA1) + PM_POP(6, ICPLB_DATA0) + + /* ICPLB Addr */ + FP = I3; + PM_POP(5, ICPLB_ADDR15) + PM_POP(4, ICPLB_ADDR14) + PM_POP(3, ICPLB_ADDR13) + PM_POP(2, ICPLB_ADDR12) + PM_POP(1, ICPLB_ADDR11) + PM_POP(0, ICPLB_ADDR10) + PM_POP_SYNC(13) + PM_POP(13, ICPLB_ADDR9) + PM_POP(12, ICPLB_ADDR8) + PM_POP(11, ICPLB_ADDR7) + PM_POP(10, ICPLB_ADDR6) + PM_POP(9, ICPLB_ADDR5) + PM_POP(8, ICPLB_ADDR4) + PM_POP(7, ICPLB_ADDR3) + PM_POP(6, ICPLB_ADDR2) + PM_POP(5, ICPLB_ADDR1) + PM_POP(4, ICPLB_ADDR0) + + /* DCPLB Data */ + FP = I2; + PM_POP(3, DCPLB_DATA15) + PM_POP(2, DCPLB_DATA14) + PM_POP(1, DCPLB_DATA13) + PM_POP(0, DCPLB_DATA12) + PM_POP_SYNC(13) + PM_POP(13, DCPLB_DATA11) + PM_POP(12, DCPLB_DATA10) + PM_POP(11, DCPLB_DATA9) + PM_POP(10, DCPLB_DATA8) + PM_POP(9, DCPLB_DATA7) + PM_POP(8, DCPLB_DATA6) + PM_POP(7, DCPLB_DATA5) + PM_POP(6, DCPLB_DATA4) + PM_POP(5, DCPLB_DATA3) + PM_POP(4, DCPLB_DATA2) + PM_POP(3, DCPLB_DATA1) + PM_POP(2, DCPLB_DATA0) + + /* DCPLB Addr */ + FP = I1; + PM_POP(1, DCPLB_ADDR15) + PM_POP(0, DCPLB_ADDR14) + PM_POP_SYNC(13) + PM_POP(13, DCPLB_ADDR13) + PM_POP(12, DCPLB_ADDR12) + PM_POP(11, DCPLB_ADDR11) + PM_POP(10, DCPLB_ADDR10) + PM_POP(9, DCPLB_ADDR9) + PM_POP(8, DCPLB_ADDR8) + PM_POP(7, DCPLB_ADDR7) + PM_POP(6, DCPLB_ADDR6) + PM_POP(5, DCPLB_ADDR5) + PM_POP(4, DCPLB_ADDR4) + PM_POP(3, DCPLB_ADDR3) + PM_POP(2, DCPLB_ADDR2) + PM_POP(1, DCPLB_ADDR1) + PM_POP(0, DCPLB_ADDR0) + + + /* Misc non-contiguous registers */ + + /* icache & dcache will enable later + drop IMEM_CONTROL, DMEM_CONTROL pop + */ + FP = I0; + PM_POP_SYNC(2) + PM_CORE_POP(2, TBUFCTL) + PM_CORE_POP(1, IMEM_CONTROL) + PM_CORE_POP(0, DMEM_CONTROL) + + /* Core Timer */ + FP = B3; + R0 = 0x1; + [FP - 0xC] = R0; + + PM_POP_SYNC(13) + FP = B3; + PM_POP(13, TCOUNT) + PM_POP(12, TSCALE) + PM_POP(11, TPERIOD) + PM_POP(10, TCNTL) + + /* CEC */ + FP = B2; + PM_POP(9, IPRIO) + PM_POP(8, ILAT) + FP += -4; /* IPEND */ + PM_POP(7, IMASK) + + /* Event Vectors */ + FP = B1; + PM_POP(6, EVT15) + PM_POP(5, EVT14) + PM_POP(4, EVT13) + PM_POP(3, EVT12) + PM_POP(2, EVT11) + PM_POP(1, EVT10) + PM_POP(0, EVT9) + PM_POP_SYNC(5) + PM_POP(5, EVT8) + PM_POP(4, EVT7) + PM_POP(3, EVT6) + PM_POP(2, EVT5) + FP += -4; /* EVT4 */ + PM_POP(1, EVT3) + PM_POP(0, EVT2) + .endm +#endif + #include <mach/pll.h> /* PLL_CTL Masks */ @@ -98,6 +743,16 @@ #define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ #endif +#ifdef CONFIG_BF60x +#define PA15WE 0x00000001 /* Allow Wake-Up from PA15 */ +#define PB15WE 0x00000002 /* Allow Wake-Up from PB15 */ +#define PC15WE 0x00000004 /* Allow Wake-Up from PC15 */ +#define PD06WE 0x00000008 /* Allow Wake-Up from PD06(ETH0_PHYINT) */ +#define PE12WE 0x00000010 /* Allow Wake-Up from PE12(ETH1_PHYINT, PUSH BUTTON) */ +#define PG04WE 0x00000020 /* Allow Wake-Up from PG04(CAN0_RX) */ +#define PG13WE 0x00000040 /* Allow Wake-Up from PG13 */ +#define USBWE 0x00000080 /* Allow Wake-Up from (USB) */ +#else #define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ #define CANWE 0x0200 /* Enable CAN Wakeup From Hibernate */ #define PHYWE 0x0400 /* Enable PHY Wakeup From Hibernate */ @@ -113,6 +768,7 @@ #else #define USBWE 0x0800 /* Enable USB Wakeup From Hibernate */ #endif +#endif #ifndef __ASSEMBLY__ diff --git a/arch/blackfin/include/asm/elf.h b/arch/blackfin/include/asm/elf.h index e6c6812a9ab..d15cb9b5d52 100644 --- a/arch/blackfin/include/asm/elf.h +++ b/arch/blackfin/include/asm/elf.h @@ -132,6 +132,4 @@ do { \ #define ELF_PLATFORM (NULL) -#define SET_PERSONALITY(ex) set_personality(PER_LINUX) - #endif diff --git a/arch/blackfin/include/asm/exec.h b/arch/blackfin/include/asm/exec.h new file mode 100644 index 00000000000..54c2e1db274 --- /dev/null +++ b/arch/blackfin/include/asm/exec.h @@ -0,0 +1 @@ +/* define arch_align_stack() here */ diff --git a/arch/blackfin/include/asm/fixed_code.h b/arch/blackfin/include/asm/fixed_code.h index 73fe53e7fd2..bc330f06207 100644 --- a/arch/blackfin/include/asm/fixed_code.h +++ b/arch/blackfin/include/asm/fixed_code.h @@ -6,11 +6,11 @@ * * Licensed under the GPL-2 or later. */ - #ifndef __BFIN_ASM_FIXED_CODE_H__ #define __BFIN_ASM_FIXED_CODE_H__ -#ifdef __KERNEL__ +#include <uapi/asm/fixed_code.h> + #ifndef __ASSEMBLY__ #include <linux/linkage.h> #include <linux/ptrace.h> @@ -28,25 +28,3 @@ extern void safe_user_instruction(void); extern void sigreturn_stub(void); #endif #endif - -#define FIXED_CODE_START 0x400 - -#define SIGRETURN_STUB 0x400 - -#define ATOMIC_SEQS_START 0x410 - -#define ATOMIC_XCHG32 0x410 -#define ATOMIC_CAS32 0x420 -#define ATOMIC_ADD32 0x430 -#define ATOMIC_SUB32 0x440 -#define ATOMIC_IOR32 0x450 -#define ATOMIC_AND32 0x460 -#define ATOMIC_XOR32 0x470 - -#define ATOMIC_SEQS_END 0x480 - -#define SAFE_USER_INSTRUCTION 0x480 - -#define FIXED_CODE_END 0x490 - -#endif diff --git a/arch/blackfin/include/asm/ftrace.h b/arch/blackfin/include/asm/ftrace.h index 8a029505d7b..2f1c3c2657a 100644 --- a/arch/blackfin/include/asm/ftrace.h +++ b/arch/blackfin/include/asm/ftrace.h @@ -66,16 +66,7 @@ extern inline void *return_address(unsigned int level) #endif /* CONFIG_FRAME_POINTER */ -#define HAVE_ARCH_CALLER_ADDR - -/* inline function or macro may lead to unexpected result */ -#define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0)) -#define CALLER_ADDR1 ((unsigned long)return_address(1)) -#define CALLER_ADDR2 ((unsigned long)return_address(2)) -#define CALLER_ADDR3 ((unsigned long)return_address(3)) -#define CALLER_ADDR4 ((unsigned long)return_address(4)) -#define CALLER_ADDR5 ((unsigned long)return_address(5)) -#define CALLER_ADDR6 ((unsigned long)return_address(6)) +#define ftrace_return_address(n) return_address(n) #endif /* __ASSEMBLY__ */ diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h index 5a25856381f..99d338ca2ea 100644 --- a/arch/blackfin/include/asm/gpio.h +++ b/arch/blackfin/include/asm/gpio.h @@ -25,7 +25,12 @@ #ifndef __ASSEMBLY__ +#ifndef CONFIG_PINCTRL + #include <linux/compiler.h> +#include <asm/blackfin.h> +#include <asm/portmux.h> +#include <asm/irq_handler.h> /*********************************************************** * @@ -44,7 +49,6 @@ * MODIFICATION HISTORY : **************************************************************/ -#if !BFIN_GPIO_PINT void set_gpio_dir(unsigned, unsigned short); void set_gpio_inen(unsigned, unsigned short); void set_gpio_polar(unsigned, unsigned short); @@ -114,7 +118,6 @@ struct gpio_port_t { unsigned short dummy16; unsigned short inen; }; -#endif #ifdef BFIN_SPECIAL_GPIO_BANKS void bfin_special_gpio_free(unsigned gpio); @@ -126,23 +129,21 @@ void bfin_special_gpio_pm_hibernate_suspend(void); #endif #ifdef CONFIG_PM -int bfin_pm_standby_ctrl(unsigned ctrl); +void bfin_gpio_pm_hibernate_restore(void); +void bfin_gpio_pm_hibernate_suspend(void); +int bfin_gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl); +int bfin_gpio_pm_standby_ctrl(unsigned ctrl); static inline int bfin_pm_standby_setup(void) { - return bfin_pm_standby_ctrl(1); + return bfin_gpio_pm_standby_ctrl(1); } static inline void bfin_pm_standby_restore(void) { - bfin_pm_standby_ctrl(0); + bfin_gpio_pm_standby_ctrl(0); } -void bfin_gpio_pm_hibernate_restore(void); -void bfin_gpio_pm_hibernate_suspend(void); - -# if !BFIN_GPIO_PINT -int gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl); struct gpio_port_s { unsigned short data; @@ -158,7 +159,6 @@ struct gpio_port_s { unsigned short reserved; unsigned short mux; }; -# endif #endif /*CONFIG_PM*/ /*********************************************************** @@ -175,36 +175,29 @@ struct gpio_port_s { ************************************************************* * MODIFICATION HISTORY : **************************************************************/ - -int bfin_gpio_request(unsigned gpio, const char *label); -void bfin_gpio_free(unsigned gpio); int bfin_gpio_irq_request(unsigned gpio, const char *label); void bfin_gpio_irq_free(unsigned gpio); -int bfin_gpio_direction_input(unsigned gpio); -int bfin_gpio_direction_output(unsigned gpio, int value); -int bfin_gpio_get_value(unsigned gpio); -void bfin_gpio_set_value(unsigned gpio, int value); +void bfin_gpio_irq_prepare(unsigned gpio); + +static inline int irq_to_gpio(unsigned irq) +{ + return irq - GPIO_IRQ_BASE; +} +#endif /* CONFIG_PINCTRL */ #include <asm/irq.h> #include <asm/errno.h> -#ifdef CONFIG_GPIOLIB #include <asm-generic/gpio.h> /* cansleep wrappers */ static inline int gpio_get_value(unsigned int gpio) { - if (gpio < MAX_BLACKFIN_GPIOS) - return bfin_gpio_get_value(gpio); - else - return __gpio_get_value(gpio); + return __gpio_get_value(gpio); } static inline void gpio_set_value(unsigned int gpio, int value) { - if (gpio < MAX_BLACKFIN_GPIOS) - bfin_gpio_set_value(gpio, value); - else - __gpio_set_value(gpio, value); + __gpio_set_value(gpio, value); } static inline int gpio_cansleep(unsigned int gpio) @@ -216,60 +209,6 @@ static inline int gpio_to_irq(unsigned gpio) { return __gpio_to_irq(gpio); } - -#else /* !CONFIG_GPIOLIB */ - -static inline int gpio_request(unsigned gpio, const char *label) -{ - return bfin_gpio_request(gpio, label); -} - -static inline void gpio_free(unsigned gpio) -{ - return bfin_gpio_free(gpio); -} - -static inline int gpio_direction_input(unsigned gpio) -{ - return bfin_gpio_direction_input(gpio); -} - -static inline int gpio_direction_output(unsigned gpio, int value) -{ - return bfin_gpio_direction_output(gpio, value); -} - -static inline int gpio_set_debounce(unsigned gpio, unsigned debounce) -{ - return -EINVAL; -} - -static inline int gpio_get_value(unsigned gpio) -{ - return bfin_gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - return bfin_gpio_set_value(gpio, value); -} - -static inline int gpio_to_irq(unsigned gpio) -{ - if (likely(gpio < MAX_BLACKFIN_GPIOS)) - return gpio + GPIO_IRQ_BASE; - - return -EINVAL; -} - -#include <asm-generic/gpio.h> /* cansleep wrappers */ -#endif /* !CONFIG_GPIOLIB */ - -static inline int irq_to_gpio(unsigned irq) -{ - return (irq - GPIO_IRQ_BASE); -} - #endif /* __ASSEMBLY__ */ #endif /* __ARCH_BLACKFIN_GPIO_H__ */ diff --git a/arch/blackfin/include/asm/gptimers.h b/arch/blackfin/include/asm/gptimers.h index 38bddcb190c..381e3d621a4 100644 --- a/arch/blackfin/include/asm/gptimers.h +++ b/arch/blackfin/include/asm/gptimers.h @@ -44,6 +44,13 @@ # define TIMER_GROUP2 1 #endif /* + * BF609: 8 timers: + */ +#if defined(CONFIG_BF60x) +# define MAX_BLACKFIN_GPTIMERS 8 +# define TIMER0_GROUP_REG TIMER_RUN +#endif +/* * All others: 3 timers: */ #define TIMER_GROUP1 0 @@ -104,6 +111,72 @@ # define FS2_TIMER_BIT TIMER1bit #endif +#ifdef CONFIG_BF60x +/* + * Timer Configuration Register Bits + */ +#define TIMER_EMU_RUN 0x8000 +#define TIMER_BPER_EN 0x4000 +#define TIMER_BWID_EN 0x2000 +#define TIMER_BDLY_EN 0x1000 +#define TIMER_OUT_DIS 0x0800 +#define TIMER_TIN_SEL 0x0400 +#define TIMER_CLK_SEL 0x0300 +#define TIMER_CLK_SCLK 0x0000 +#define TIMER_CLK_ALT_CLK0 0x0100 +#define TIMER_CLK_ALT_CLK1 0x0300 +#define TIMER_PULSE_HI 0x0080 +#define TIMER_SLAVE_TRIG 0x0040 +#define TIMER_IRQ_MODE 0x0030 +#define TIMER_IRQ_ACT_EDGE 0x0000 +#define TIMER_IRQ_DLY 0x0010 +#define TIMER_IRQ_WID_DLY 0x0020 +#define TIMER_IRQ_PER 0x0030 +#define TIMER_MODE 0x000f +#define TIMER_MODE_WDOG_P 0x0008 +#define TIMER_MODE_WDOG_W 0x0009 +#define TIMER_MODE_PWM_CONT 0x000c +#define TIMER_MODE_PWM 0x000d +#define TIMER_MODE_WDTH 0x000a +#define TIMER_MODE_WDTH_D 0x000b +#define TIMER_MODE_EXT_CLK 0x000e +#define TIMER_MODE_PININT 0x000f + +/* + * Timer Status Register Bits + */ +#define TIMER_STATUS_TIMIL0 0x0001 +#define TIMER_STATUS_TIMIL1 0x0002 +#define TIMER_STATUS_TIMIL2 0x0004 +#define TIMER_STATUS_TIMIL3 0x0008 +#define TIMER_STATUS_TIMIL4 0x0010 +#define TIMER_STATUS_TIMIL5 0x0020 +#define TIMER_STATUS_TIMIL6 0x0040 +#define TIMER_STATUS_TIMIL7 0x0080 + +#define TIMER_STATUS_TOVF0 0x0001 /* timer 0 overflow error */ +#define TIMER_STATUS_TOVF1 0x0002 +#define TIMER_STATUS_TOVF2 0x0004 +#define TIMER_STATUS_TOVF3 0x0008 +#define TIMER_STATUS_TOVF4 0x0010 +#define TIMER_STATUS_TOVF5 0x0020 +#define TIMER_STATUS_TOVF6 0x0040 +#define TIMER_STATUS_TOVF7 0x0080 + +/* + * Timer Slave Enable Status : write 1 to clear + */ +#define TIMER_STATUS_TRUN0 0x0001 +#define TIMER_STATUS_TRUN1 0x0002 +#define TIMER_STATUS_TRUN2 0x0004 +#define TIMER_STATUS_TRUN3 0x0008 +#define TIMER_STATUS_TRUN4 0x0010 +#define TIMER_STATUS_TRUN5 0x0020 +#define TIMER_STATUS_TRUN6 0x0040 +#define TIMER_STATUS_TRUN7 0x0080 + +#else + /* * Timer Configuration Register Bits */ @@ -170,12 +243,18 @@ #define TIMER_STATUS_TRUN10 0x4000 #define TIMER_STATUS_TRUN11 0x8000 +#endif + /* The actual gptimer API */ void set_gptimer_pwidth(unsigned int timer_id, uint32_t width); uint32_t get_gptimer_pwidth(unsigned int timer_id); void set_gptimer_period(unsigned int timer_id, uint32_t period); uint32_t get_gptimer_period(unsigned int timer_id); +#ifdef CONFIG_BF60x +void set_gptimer_delay(unsigned int timer_id, uint32_t delay); +uint32_t get_gptimer_delay(unsigned int timer_id); +#endif uint32_t get_gptimer_count(unsigned int timer_id); int get_gptimer_intr(unsigned int timer_id); void clear_gptimer_intr(unsigned int timer_id); @@ -217,16 +296,41 @@ struct bfin_gptimer_regs { u32 counter; u32 period; u32 width; +#ifdef CONFIG_BF60x + u32 delay; +#endif }; /* * bfin group timer registers layout */ +#ifndef CONFIG_BF60x struct bfin_gptimer_group_regs { __BFP(enable); __BFP(disable); u32 status; }; +#else +struct bfin_gptimer_group_regs { + __BFP(run); + __BFP(enable); + __BFP(disable); + __BFP(stop_cfg); + __BFP(stop_cfg_set); + __BFP(stop_cfg_clr); + __BFP(data_imsk); + __BFP(stat_imsk); + __BFP(tr_msk); + __BFP(tr_ie); + __BFP(data_ilat); + __BFP(stat_ilat); + __BFP(err_status); + __BFP(bcast_per); + __BFP(bcast_wid); + __BFP(bcast_dly); + +}; +#endif #undef __BFP diff --git a/arch/blackfin/include/asm/hardirq.h b/arch/blackfin/include/asm/hardirq.h index c078dd78d99..58b54a6d5a1 100644 --- a/arch/blackfin/include/asm/hardirq.h +++ b/arch/blackfin/include/asm/hardirq.h @@ -12,9 +12,6 @@ extern void ack_bad_irq(unsigned int irq); #define ack_bad_irq ack_bad_irq -/* Define until common code gets sane defaults */ -#define HARDIRQ_BITS 9 - #include <asm-generic/hardirq.h> #endif diff --git a/arch/blackfin/include/asm/ioctls.h b/arch/blackfin/include/asm/ioctls.h deleted file mode 100644 index eca8d75b0a8..00000000000 --- a/arch/blackfin/include/asm/ioctls.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ARCH_BFIN_IOCTLS_H__ -#define __ARCH_BFIN_IOCTLS_H__ - -#define FIOQSIZE 0x545E -#include <asm-generic/ioctls.h> - -#endif diff --git a/arch/blackfin/include/asm/irq.h b/arch/blackfin/include/asm/irq.h index 12f4060a31b..89de539ed01 100644 --- a/arch/blackfin/include/asm/irq.h +++ b/arch/blackfin/include/asm/irq.h @@ -38,8 +38,4 @@ #include <asm-generic/irq.h> -#ifdef CONFIG_NMI_WATCHDOG -# define ARCH_HAS_NMI_WATCHDOG -#endif - #endif /* _BFIN_IRQ_H_ */ diff --git a/arch/blackfin/include/asm/irq_handler.h b/arch/blackfin/include/asm/irq_handler.h index ee73f79aef1..4b2a992794d 100644 --- a/arch/blackfin/include/asm/irq_handler.h +++ b/arch/blackfin/include/asm/irq_handler.h @@ -9,13 +9,14 @@ #include <linux/types.h> #include <linux/linkage.h> +#include <mach/irq.h> /* init functions only */ -extern int __init init_arch_irq(void); +extern int init_arch_irq(void); extern void init_exception_vectors(void); -extern void __init program_IAR(void); +extern void program_IAR(void); #ifdef init_mach_irq -extern void __init init_mach_irq(void); +extern void init_mach_irq(void); #else # define init_mach_irq() #endif diff --git a/arch/blackfin/include/asm/irqflags.h b/arch/blackfin/include/asm/irqflags.h index 43eb4749de3..07aff230a81 100644 --- a/arch/blackfin/include/asm/irqflags.h +++ b/arch/blackfin/include/asm/irqflags.h @@ -67,7 +67,11 @@ static inline notrace unsigned long __hard_local_irq_save(void) static inline notrace int hard_irqs_disabled_flags(unsigned long flags) { +#ifdef CONFIG_BF60x + return (flags & IMASK_IVG11) == 0; +#else return (flags & ~0x3f) == 0; +#endif } static inline notrace int hard_irqs_disabled(void) @@ -224,7 +228,7 @@ static inline notrace void hard_local_irq_restore(unsigned long flags) * Direct interface to linux/irqflags.h. */ #define arch_local_save_flags() hard_local_save_flags() -#define arch_local_irq_save(flags) __hard_local_irq_save() +#define arch_local_irq_save() __hard_local_irq_save() #define arch_local_irq_restore(flags) __hard_local_irq_restore(flags) #define arch_local_irq_enable() __hard_local_irq_enable() #define arch_local_irq_disable() __hard_local_irq_disable() diff --git a/arch/blackfin/include/asm/kgdb.h b/arch/blackfin/include/asm/kgdb.h index aaf884591b0..2703ddeeb5d 100644 --- a/arch/blackfin/include/asm/kgdb.h +++ b/arch/blackfin/include/asm/kgdb.h @@ -109,6 +109,7 @@ static inline void arch_kgdb_breakpoint(void) # define CACHE_FLUSH_IS_SAFE 1 #endif #define GDB_ADJUSTS_BREAK_OFFSET +#define GDB_SKIP_HW_WATCH_TEST #define HW_INST_WATCHPOINT_NUM 6 #define HW_WATCHPOINT_NUM 8 #define TYPE_INST_WATCHPOINT 0 diff --git a/arch/blackfin/include/asm/mem_init.h b/arch/blackfin/include/asm/mem_init.h index 237579935e2..c865b33eeb6 100644 --- a/arch/blackfin/include/asm/mem_init.h +++ b/arch/blackfin/include/asm/mem_init.h @@ -6,6 +6,9 @@ * Licensed under the GPL-2 or later. */ +#ifndef __MEM_INIT_H__ +#define __MEM_INIT_H__ + #if defined(EBIU_SDGCTL) #if defined(CONFIG_MEM_MT48LC16M16A2TG_75) || \ defined(CONFIG_MEM_MT48LC64M4A2FB_7E) || \ @@ -277,3 +280,221 @@ #else #define PLL_BYPASS 0 #endif + +#ifdef CONFIG_BF60x + +/* DMC status bits */ +#define IDLE 0x1 +#define MEMINITDONE 0x4 +#define SRACK 0x8 +#define PDACK 0x10 +#define DPDACK 0x20 +#define DLLCALDONE 0x2000 +#define PENDREF 0xF0000 +#define PHYRDPHASE 0xF00000 +#define PHYRDPHASE_OFFSET 20 + +/* DMC control bits */ +#define LPDDR 0x2 +#define INIT 0x4 +#define SRREQ 0x8 +#define PDREQ 0x10 +#define DPDREQ 0x20 +#define PREC 0x40 +#define ADDRMODE 0x100 +#define RDTOWR 0xE00 +#define PPREF 0x1000 +#define DLLCAL 0x2000 + +/* DMC DLL control bits */ +#define DLLCALRDCNT 0xFF +#define DATACYC 0xF00 +#define DATACYC_OFFSET 8 + +/* CGU Divisor bits */ +#define CSEL_OFFSET 0 +#define S0SEL_OFFSET 5 +#define SYSSEL_OFFSET 8 +#define S1SEL_OFFSET 13 +#define DSEL_OFFSET 16 +#define OSEL_OFFSET 22 +#define ALGN 0x20000000 +#define UPDT 0x40000000 +#define LOCK 0x80000000 + +/* CGU Status bits */ +#define PLLEN 0x1 +#define PLLBP 0x2 +#define PLOCK 0x4 +#define CLKSALGN 0x8 + +/* CGU Control bits */ +#define MSEL_MASK 0x7F00 +#define DF_MASK 0x1 + +struct ddr_config { + u32 ddr_clk; + u32 dmc_ddrctl; + u32 dmc_effctl; + u32 dmc_ddrcfg; + u32 dmc_ddrtr0; + u32 dmc_ddrtr1; + u32 dmc_ddrtr2; + u32 dmc_ddrmr; + u32 dmc_ddrmr1; +}; + +#if defined(CONFIG_MEM_MT47H64M16) +static struct ddr_config ddr_config_table[] __attribute__((section(".data_l1"))) = { + [0] = { + .ddr_clk = 125, + .dmc_ddrctl = 0x00000904, + .dmc_effctl = 0x004400C0, + .dmc_ddrcfg = 0x00000422, + .dmc_ddrtr0 = 0x20705212, + .dmc_ddrtr1 = 0x201003CF, + .dmc_ddrtr2 = 0x00320107, + .dmc_ddrmr = 0x00000422, + .dmc_ddrmr1 = 0x4, + }, + [1] = { + .ddr_clk = 133, + .dmc_ddrctl = 0x00000904, + .dmc_effctl = 0x004400C0, + .dmc_ddrcfg = 0x00000422, + .dmc_ddrtr0 = 0x20806313, + .dmc_ddrtr1 = 0x2013040D, + .dmc_ddrtr2 = 0x00320108, + .dmc_ddrmr = 0x00000632, + .dmc_ddrmr1 = 0x4, + }, + [2] = { + .ddr_clk = 150, + .dmc_ddrctl = 0x00000904, + .dmc_effctl = 0x004400C0, + .dmc_ddrcfg = 0x00000422, + .dmc_ddrtr0 = 0x20A07323, + .dmc_ddrtr1 = 0x20160492, + .dmc_ddrtr2 = 0x00320209, + .dmc_ddrmr = 0x00000632, + .dmc_ddrmr1 = 0x4, + }, + [3] = { + .ddr_clk = 166, + .dmc_ddrctl = 0x00000904, + .dmc_effctl = 0x004400C0, + .dmc_ddrcfg = 0x00000422, + .dmc_ddrtr0 = 0x20A07323, + .dmc_ddrtr1 = 0x2016050E, + .dmc_ddrtr2 = 0x00320209, + .dmc_ddrmr = 0x00000632, + .dmc_ddrmr1 = 0x4, + }, + [4] = { + .ddr_clk = 200, + .dmc_ddrctl = 0x00000904, + .dmc_effctl = 0x004400C0, + .dmc_ddrcfg = 0x00000422, + .dmc_ddrtr0 = 0x20a07323, + .dmc_ddrtr1 = 0x2016050f, + .dmc_ddrtr2 = 0x00320509, + .dmc_ddrmr = 0x00000632, + .dmc_ddrmr1 = 0x4, + }, + [5] = { + .ddr_clk = 225, + .dmc_ddrctl = 0x00000904, + .dmc_effctl = 0x004400C0, + .dmc_ddrcfg = 0x00000422, + .dmc_ddrtr0 = 0x20E0A424, + .dmc_ddrtr1 = 0x302006DB, + .dmc_ddrtr2 = 0x0032020D, + .dmc_ddrmr = 0x00000842, + .dmc_ddrmr1 = 0x4, + }, + [6] = { + .ddr_clk = 250, + .dmc_ddrctl = 0x00000904, + .dmc_effctl = 0x004400C0, + .dmc_ddrcfg = 0x00000422, + .dmc_ddrtr0 = 0x20E0A424, + .dmc_ddrtr1 = 0x3020079E, + .dmc_ddrtr2 = 0x0032050D, + .dmc_ddrmr = 0x00000842, + .dmc_ddrmr1 = 0x4, + }, +}; +#endif + +static inline void dmc_enter_self_refresh(void) +{ + if (bfin_read_DMC0_STAT() & MEMINITDONE) { + bfin_write_DMC0_CTL(bfin_read_DMC0_CTL() | SRREQ); + while (!(bfin_read_DMC0_STAT() & SRACK)) + continue; + } +} + +static inline void dmc_exit_self_refresh(void) +{ + if (bfin_read_DMC0_STAT() & MEMINITDONE) { + bfin_write_DMC0_CTL(bfin_read_DMC0_CTL() & ~SRREQ); + while (bfin_read_DMC0_STAT() & SRACK) + continue; + } +} + +static inline void init_cgu(u32 cgu_div, u32 cgu_ctl) +{ + dmc_enter_self_refresh(); + + /* Don't set the same value of MSEL and DF to CGU_CTL */ + if ((bfin_read32(CGU0_CTL) & (MSEL_MASK | DF_MASK)) + != cgu_ctl) { + bfin_write32(CGU0_DIV, cgu_div); + bfin_write32(CGU0_CTL, cgu_ctl); + while ((bfin_read32(CGU0_STAT) & (CLKSALGN | PLLBP)) || + !(bfin_read32(CGU0_STAT) & PLOCK)) + continue; + } + + bfin_write32(CGU0_DIV, cgu_div | UPDT); + while (bfin_read32(CGU0_STAT) & CLKSALGN) + continue; + + dmc_exit_self_refresh(); +} + +static inline void init_dmc(u32 dmc_clk) +{ + int i, dlldatacycle, dll_ctl; + + for (i = 0; i < 7; i++) { + if (ddr_config_table[i].ddr_clk == dmc_clk) { + bfin_write_DMC0_CFG(ddr_config_table[i].dmc_ddrcfg); + bfin_write_DMC0_TR0(ddr_config_table[i].dmc_ddrtr0); + bfin_write_DMC0_TR1(ddr_config_table[i].dmc_ddrtr1); + bfin_write_DMC0_TR2(ddr_config_table[i].dmc_ddrtr2); + bfin_write_DMC0_MR(ddr_config_table[i].dmc_ddrmr); + bfin_write_DMC0_EMR1(ddr_config_table[i].dmc_ddrmr1); + bfin_write_DMC0_EFFCTL(ddr_config_table[i].dmc_effctl); + bfin_write_DMC0_CTL(ddr_config_table[i].dmc_ddrctl); + break; + } + } + + while (!(bfin_read_DMC0_STAT() & MEMINITDONE)) + continue; + + dlldatacycle = (bfin_read_DMC0_STAT() & PHYRDPHASE) >> PHYRDPHASE_OFFSET; + dll_ctl = bfin_read_DMC0_DLLCTL(); + dll_ctl &= ~DATACYC; + bfin_write_DMC0_DLLCTL(dll_ctl | (dlldatacycle << DATACYC_OFFSET)); + + while (!(bfin_read_DMC0_STAT() & DLLCALDONE)) + continue; +} +#endif + +#endif /*__MEM_INIT_H__*/ + diff --git a/arch/blackfin/include/asm/mmu_context.h b/arch/blackfin/include/asm/mmu_context.h index 3828c70e7a2..15b16d3e8de 100644 --- a/arch/blackfin/include/asm/mmu_context.h +++ b/arch/blackfin/include/asm/mmu_context.h @@ -30,8 +30,11 @@ extern void *l1sram_alloc_max(void*); static inline void free_l1stack(void) { nr_l1stack_tasks--; - if (nr_l1stack_tasks == 0) + if (nr_l1stack_tasks == 0) { l1sram_free(l1_stack_base); + l1_stack_base = NULL; + l1_stack_len = 0; + } } static inline unsigned long diff --git a/arch/blackfin/include/asm/module.h b/arch/blackfin/include/asm/module.h index ed5689b82c9..231a149b3f7 100644 --- a/arch/blackfin/include/asm/module.h +++ b/arch/blackfin/include/asm/module.h @@ -7,9 +7,7 @@ #ifndef _ASM_BFIN_MODULE_H #define _ASM_BFIN_MODULE_H -#define Elf_Shdr Elf32_Shdr -#define Elf_Sym Elf32_Sym -#define Elf_Ehdr Elf32_Ehdr +#include <asm-generic/module.h> struct mod_arch_specific { Elf_Shdr *text_l1; diff --git a/arch/blackfin/include/asm/page.h b/arch/blackfin/include/asm/page.h index 7202404966f..b93474d5be7 100644 --- a/arch/blackfin/include/asm/page.h +++ b/arch/blackfin/include/asm/page.h @@ -7,14 +7,15 @@ #ifndef _BLACKFIN_PAGE_H #define _BLACKFIN_PAGE_H -#include <asm-generic/page.h> -#define MAP_NR(addr) (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT) +#define ARCH_PFN_OFFSET (CONFIG_PHY_RAM_BASE_ADDRESS >> PAGE_SHIFT) +#define MAP_NR(addr) ((unsigned long)(addr) >> PAGE_SHIFT) #define VM_DATA_DEFAULT_FLAGS \ (VM_READ | VM_WRITE | \ ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) +#include <asm-generic/page.h> #include <asm-generic/memory_model.h> #include <asm-generic/getorder.h> diff --git a/arch/blackfin/include/asm/pci.h b/arch/blackfin/include/asm/pci.h index 74352c4597d..c737909fba4 100644 --- a/arch/blackfin/include/asm/pci.h +++ b/arch/blackfin/include/asm/pci.h @@ -10,9 +10,4 @@ #define PCIBIOS_MIN_IO 0x00001000 #define PCIBIOS_MIN_MEM 0x10000000 -static inline void pcibios_penalize_isa_irq(int irq) -{ - /* We don't do dynamic PCI IRQ allocation */ -} - #endif /* _ASM_BFIN_PCI_H */ diff --git a/arch/blackfin/include/asm/pda.h b/arch/blackfin/include/asm/pda.h index 28c2498c9c9..68d6f6618f2 100644 --- a/arch/blackfin/include/asm/pda.h +++ b/arch/blackfin/include/asm/pda.h @@ -13,7 +13,9 @@ #ifndef __ASSEMBLY__ struct blackfin_pda { /* Per-processor Data Area */ +#ifdef CONFIG_SMP struct blackfin_pda *next; +#endif unsigned long syscfg; #ifdef CONFIG_SMP diff --git a/arch/blackfin/include/asm/pgtable.h b/arch/blackfin/include/asm/pgtable.h index dcca3e6d6e8..0b049019eba 100644 --- a/arch/blackfin/include/asm/pgtable.h +++ b/arch/blackfin/include/asm/pgtable.h @@ -83,14 +83,11 @@ PTE_BIT_FUNC(mkyoung, |= _PAGE_ACCESSED); #define ZERO_PAGE(vaddr) virt_to_page(empty_zero_page) extern char empty_zero_page[]; -extern unsigned int kobjsize(const void *objp); - #define swapper_pg_dir ((pgd_t *) 0) /* * No page table caches to initialise. */ #define pgtable_cache_init() do { } while (0) -#define io_remap_pfn_range remap_pfn_range /* * All 32bit addresses are effectively valid for vmalloc... diff --git a/arch/blackfin/include/asm/pm.h b/arch/blackfin/include/asm/pm.h new file mode 100644 index 00000000000..f72239bf363 --- /dev/null +++ b/arch/blackfin/include/asm/pm.h @@ -0,0 +1,31 @@ +/* + * Blackfin bf609 power management + * + * Copyright 2011 Analog Devices Inc. + * + * Licensed under the GPL-2 + */ + +#ifndef __PM_H__ +#define __PM_H__ + +#include <linux/suspend.h> + +struct bfin_cpu_pm_fns { + void (*save)(unsigned long *); + void (*restore)(unsigned long *); + int (*valid)(suspend_state_t state); + void (*enter)(suspend_state_t state); + int (*prepare)(void); + void (*finish)(void); +}; + +extern struct bfin_cpu_pm_fns *bfin_cpu_pm; + +# ifdef CONFIG_BFIN_COREB +void bfin_coreb_start(void); +void bfin_coreb_stop(void); +void bfin_coreb_reset(void); +# endif + +#endif diff --git a/arch/blackfin/include/asm/portmux.h b/arch/blackfin/include/asm/portmux.h index 9b1e2c37b32..c8f0939419b 100644 --- a/arch/blackfin/include/asm/portmux.h +++ b/arch/blackfin/include/asm/portmux.h @@ -17,14 +17,27 @@ #define P_MAYSHARE 0x2000 #define P_DONTCARE 0x1000 +#ifdef CONFIG_PINCTRL +int bfin_internal_set_wake(unsigned int irq, unsigned int state); +#define gpio_pint_regs bfin_pint_regs +#define adi_internal_set_wake bfin_internal_set_wake + +#define peripheral_request(per, label) (0) +#define peripheral_free(per) +#define peripheral_request_list(per, label) (0) +#define peripheral_free_list(per) +#else int peripheral_request(unsigned short per, const char *label); void peripheral_free(unsigned short per); int peripheral_request_list(const unsigned short per[], const char *label); void peripheral_free_list(const unsigned short per[]); +#endif -#include <asm/gpio.h> +#include <linux/err.h> +#include <linux/pinctrl/pinctrl.h> #include <mach/portmux.h> +#include <mach/gpio.h> #ifndef P_SPORT2_TFS #define P_SPORT2_TFS P_UNDEF diff --git a/arch/blackfin/include/asm/processor.h b/arch/blackfin/include/asm/processor.h index 8af7772e84c..d0e72e9475a 100644 --- a/arch/blackfin/include/asm/processor.h +++ b/arch/blackfin/include/asm/processor.h @@ -75,10 +75,6 @@ static inline void release_thread(struct task_struct *dead_task) { } -#define prepare_to_copy(tsk) do { } while (0) - -extern int kernel_thread(int (*fn) (void *), void *arg, unsigned long flags); - /* * Free current thread data structures etc.. */ diff --git a/arch/blackfin/include/asm/ptrace.h b/arch/blackfin/include/asm/ptrace.h index 10d8641180f..c00491594b4 100644 --- a/arch/blackfin/include/asm/ptrace.h +++ b/arch/blackfin/include/asm/ptrace.h @@ -3,102 +3,13 @@ * * Licensed under the GPL-2 or later. */ - #ifndef _BFIN_PTRACE_H #define _BFIN_PTRACE_H -/* - * GCC defines register number like this: - * ----------------------------- - * 0 - 7 are data registers R0-R7 - * 8 - 15 are address registers P0-P7 - * 16 - 31 dsp registers I/B/L0 -- I/B/L3 & M0--M3 - * 32 - 33 A registers A0 & A1 - * 34 - status register - * ----------------------------- - * - * We follows above, except: - * 32-33 --- Low 32-bit of A0&1 - * 34-35 --- High 8-bit of A0&1 - */ +#include <uapi/asm/ptrace.h> #ifndef __ASSEMBLY__ -struct task_struct; - -/* this struct defines the way the registers are stored on the - stack during a system call. */ - -struct pt_regs { - long orig_pc; - long ipend; - long seqstat; - long rete; - long retn; - long retx; - long pc; /* PC == RETI */ - long rets; - long reserved; /* Used as scratch during system calls */ - long astat; - long lb1; - long lb0; - long lt1; - long lt0; - long lc1; - long lc0; - long a1w; - long a1x; - long a0w; - long a0x; - long b3; - long b2; - long b1; - long b0; - long l3; - long l2; - long l1; - long l0; - long m3; - long m2; - long m1; - long m0; - long i3; - long i2; - long i1; - long i0; - long usp; - long fp; - long p5; - long p4; - long p3; - long p2; - long p1; - long p0; - long r7; - long r6; - long r5; - long r4; - long r3; - long r2; - long r1; - long r0; - long orig_r0; - long orig_p0; - long syscfg; -}; - -/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ -#define PTRACE_GETREGS 12 -#define PTRACE_SETREGS 13 /* ptrace signal */ - -#define PTRACE_GETFDPIC 31 /* get the ELF fdpic loadmap address */ -#define PTRACE_GETFDPIC_EXEC 0 /* [addr] request the executable loadmap */ -#define PTRACE_GETFDPIC_INTERP 1 /* [addr] request the interpreter loadmap */ - -#define PS_S (0x0002) - -#ifdef __KERNEL__ - /* user_mode returns true if only one bit is set in IPEND, other than the master interrupt enable. */ #define user_mode(regs) (!(((regs)->ipend & ~0x10) & (((regs)->ipend & ~0x10) - 1))) @@ -106,6 +17,7 @@ struct pt_regs { #define arch_has_single_step() (1) /* common code demands this function */ #define ptrace_disable(child) user_disable_single_step(child) +#define current_user_stack_pointer() rdusp() extern int is_user_addr_valid(struct task_struct *child, unsigned long start, unsigned long len); @@ -126,75 +38,5 @@ extern int is_user_addr_valid(struct task_struct *child, #include <asm-generic/ptrace.h> -#endif /* __KERNEL__ */ - #endif /* __ASSEMBLY__ */ - -/* - * Offsets used by 'ptrace' system call interface. - */ - -#define PT_R0 204 -#define PT_R1 200 -#define PT_R2 196 -#define PT_R3 192 -#define PT_R4 188 -#define PT_R5 184 -#define PT_R6 180 -#define PT_R7 176 -#define PT_P0 172 -#define PT_P1 168 -#define PT_P2 164 -#define PT_P3 160 -#define PT_P4 156 -#define PT_P5 152 -#define PT_FP 148 -#define PT_USP 144 -#define PT_I0 140 -#define PT_I1 136 -#define PT_I2 132 -#define PT_I3 128 -#define PT_M0 124 -#define PT_M1 120 -#define PT_M2 116 -#define PT_M3 112 -#define PT_L0 108 -#define PT_L1 104 -#define PT_L2 100 -#define PT_L3 96 -#define PT_B0 92 -#define PT_B1 88 -#define PT_B2 84 -#define PT_B3 80 -#define PT_A0X 76 -#define PT_A0W 72 -#define PT_A1X 68 -#define PT_A1W 64 -#define PT_LC0 60 -#define PT_LC1 56 -#define PT_LT0 52 -#define PT_LT1 48 -#define PT_LB0 44 -#define PT_LB1 40 -#define PT_ASTAT 36 -#define PT_RESERVED 32 -#define PT_RETS 28 -#define PT_PC 24 -#define PT_RETX 20 -#define PT_RETN 16 -#define PT_RETE 12 -#define PT_SEQSTAT 8 -#define PT_IPEND 4 - -#define PT_ORIG_R0 208 -#define PT_ORIG_P0 212 -#define PT_SYSCFG 216 -#define PT_TEXT_ADDR 220 -#define PT_TEXT_END_ADDR 224 -#define PT_DATA_ADDR 228 -#define PT_FDPIC_EXEC 232 -#define PT_FDPIC_INTERP 236 - -#define PT_LAST_PSEUDO PT_FDPIC_INTERP - #endif /* _BFIN_PTRACE_H */ diff --git a/arch/blackfin/include/asm/scb.h b/arch/blackfin/include/asm/scb.h new file mode 100644 index 00000000000..a294cc0d1a4 --- /dev/null +++ b/arch/blackfin/include/asm/scb.h @@ -0,0 +1,21 @@ +/* + * arch/blackfin/mach-common/scb-init.c - reprogram system cross bar priority + * + * Copyright 2012 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#define SCB_SLOT_OFFSET 24 +#define SCB_MI_MAX_SLOT 32 + +struct scb_mi_prio { + unsigned long scb_mi_arbr; + unsigned long scb_mi_arbw; + unsigned char scb_mi_slots; + unsigned char scb_mi_prio[SCB_MI_MAX_SLOT]; +}; + +extern struct scb_mi_prio scb_data[]; + +extern void init_scb(void); diff --git a/arch/blackfin/include/asm/signal.h b/arch/blackfin/include/asm/signal.h deleted file mode 100644 index 77a3bf37b69..00000000000 --- a/arch/blackfin/include/asm/signal.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _BLACKFIN_SIGNAL_H -#define _BLACKFIN_SIGNAL_H - -#define SA_RESTORER 0x04000000 -#include <asm-generic/signal.h> - -#endif diff --git a/arch/blackfin/include/asm/smp.h b/arch/blackfin/include/asm/smp.h index dc3d144b4bb..9631598dcc5 100644 --- a/arch/blackfin/include/asm/smp.h +++ b/arch/blackfin/include/asm/smp.h @@ -18,6 +18,8 @@ #define raw_smp_processor_id() blackfin_core_id() extern void bfin_relocate_coreb_l1_mem(void); +extern void arch_send_call_function_single_ipi(int cpu); +extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); #if defined(CONFIG_SMP) && defined(CONFIG_ICACHE_FLUSH_L1) asmlinkage void blackfin_icache_flush_range_l1(unsigned long *ptr); diff --git a/arch/blackfin/include/asm/switch_to.h b/arch/blackfin/include/asm/switch_to.h new file mode 100644 index 00000000000..aaf671be924 --- /dev/null +++ b/arch/blackfin/include/asm/switch_to.h @@ -0,0 +1,39 @@ +/* + * Copyright 2004-2009 Analog Devices Inc. + * Tony Kou (tonyko@lineo.ca) + * + * Licensed under the GPL-2 or later + */ + +#ifndef _BLACKFIN_SWITCH_TO_H +#define _BLACKFIN_SWITCH_TO_H + +#define prepare_to_switch() do { } while(0) + +/* + * switch_to(n) should switch tasks to task ptr, first checking that + * ptr isn't the current task, in which case it does nothing. + */ + +#include <asm/l1layout.h> +#include <asm/mem_map.h> + +asmlinkage struct task_struct *resume(struct task_struct *prev, struct task_struct *next); + +#ifndef CONFIG_SMP +#define switch_to(prev,next,last) \ +do { \ + memcpy (&task_thread_info(prev)->l1_task_info, L1_SCRATCH_TASK_INFO, \ + sizeof *L1_SCRATCH_TASK_INFO); \ + memcpy (L1_SCRATCH_TASK_INFO, &task_thread_info(next)->l1_task_info, \ + sizeof *L1_SCRATCH_TASK_INFO); \ + (last) = resume (prev, next); \ +} while (0) +#else +#define switch_to(prev, next, last) \ +do { \ + (last) = resume(prev, next); \ +} while (0) +#endif + +#endif /* _BLACKFIN_SWITCH_TO_H */ diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h index 53ad10005ae..55f473bdad3 100644 --- a/arch/blackfin/include/asm/thread_info.h +++ b/arch/blackfin/include/asm/thread_info.h @@ -88,16 +88,12 @@ static inline struct thread_info *current_thread_info(void) #define TI_CPU 12 #define TI_PREEMPT 16 -#define PREEMPT_ACTIVE 0x4000000 - /* * thread information flag bit numbers */ #define TIF_SYSCALL_TRACE 0 /* syscall trace active */ #define TIF_SIGPENDING 1 /* signal pending */ #define TIF_NEED_RESCHED 2 /* rescheduling necessary */ -#define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling - TIF_NEED_RESCHED */ #define TIF_MEMDIE 4 /* is terminating due to OOM killer */ #define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */ #define TIF_IRQ_SYNC 7 /* sync pipeline stage */ @@ -108,8 +104,6 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) #define _TIF_SIGPENDING (1<<TIF_SIGPENDING) #define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED) -#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) -#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK) #define _TIF_IRQ_SYNC (1<<TIF_IRQ_SYNC) #define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME) #define _TIF_SINGLESTEP (1<<TIF_SINGLESTEP) diff --git a/arch/blackfin/include/asm/traps.h b/arch/blackfin/include/asm/traps.h index 70c4e511cae..cec771b8100 100644 --- a/arch/blackfin/include/asm/traps.h +++ b/arch/blackfin/include/asm/traps.h @@ -125,5 +125,7 @@ level " for Supervisor use: Supervisor only registers, all MMRs, and Supervisor\n" \ level " only instructions.\n" +extern void double_fault_c(struct pt_regs *fp); + #endif /* __ASSEMBLY__ */ #endif /* _BFIN_TRAPS_H */ diff --git a/arch/blackfin/include/asm/uaccess.h b/arch/blackfin/include/asm/uaccess.h index 5cc11150282..57701c3b8a5 100644 --- a/arch/blackfin/include/asm/uaccess.h +++ b/arch/blackfin/include/asm/uaccess.h @@ -34,23 +34,6 @@ static inline void set_fs(mm_segment_t fs) #define access_ok(type, addr, size) _access_ok((unsigned long)(addr), (size)) -static inline int is_in_rom(unsigned long addr) -{ - /* - * What we are really trying to do is determine if addr is - * in an allocated kernel memory region. If not then assume - * we cannot free it or otherwise de-allocate it. Ideally - * we could restrict this to really being in a ROM or flash, - * but that would need to be done on a board by board basis, - * not globally. - */ - if ((addr < _ramstart) || (addr >= _ramend)) - return (1); - - /* Default case, not in ROM */ - return (0); -} - /* * The fs value determines whether argument validity checking should be * performed or not. If get_fs() == USER_DS, checking is performed, with @@ -89,7 +72,7 @@ struct exception_table_entry { ({ \ int _err = 0; \ typeof(*(p)) _x = (x); \ - typeof(*(p)) *_p = (p); \ + typeof(*(p)) __user *_p = (p); \ if (!access_ok(VERIFY_WRITE, _p, sizeof(*(_p)))) {\ _err = -EFAULT; \ } \ @@ -108,8 +91,8 @@ struct exception_table_entry { long _xl, _xh; \ _xl = ((long *)&_x)[0]; \ _xh = ((long *)&_x)[1]; \ - __put_user_asm(_xl, ((long *)_p)+0, ); \ - __put_user_asm(_xh, ((long *)_p)+1, ); \ + __put_user_asm(_xl, ((long __user *)_p)+0, ); \ + __put_user_asm(_xh, ((long __user *)_p)+1, ); \ } break; \ default: \ _err = __put_user_bad(); \ @@ -136,7 +119,7 @@ static inline int bad_user_access_length(void) * aliasing issues. */ -#define __ptr(x) ((unsigned long *)(x)) +#define __ptr(x) ((unsigned long __force *)(x)) #define __put_user_asm(x,p,bhw) \ __asm__ (#bhw"[%1] = %0;\n\t" \ @@ -208,6 +191,7 @@ copy_to_user(void __user *to, const void *from, unsigned long n) memcpy((void __force *)to, from, n); else return n; + SSYNC(); return 0; } @@ -216,12 +200,12 @@ copy_to_user(void __user *to, const void *from, unsigned long n) */ static inline long __must_check -strncpy_from_user(char *dst, const char *src, long count) +strncpy_from_user(char *dst, const char __user *src, long count) { char *tmp; if (!access_ok(VERIFY_READ, src, 1)) return -EFAULT; - strncpy(dst, src, count); + strncpy(dst, (const char __force *)src, count); for (tmp = dst; *tmp && count > 0; tmp++, count--) ; return (tmp - dst); } @@ -237,18 +221,18 @@ strncpy_from_user(char *dst, const char *src, long count) * On exception, returns 0. * If the string is too long, returns a value greater than n. */ -static inline long __must_check strnlen_user(const char *src, long n) +static inline long __must_check strnlen_user(const char __user *src, long n) { if (!access_ok(VERIFY_READ, src, 1)) return 0; - return strnlen(src, n) + 1; + return strnlen((const char __force *)src, n) + 1; } -static inline long __must_check strlen_user(const char *src) +static inline long __must_check strlen_user(const char __user *src) { if (!access_ok(VERIFY_READ, src, 1)) return 0; - return strlen(src) + 1; + return strlen((const char __force *)src) + 1; } /* @@ -256,11 +240,11 @@ static inline long __must_check strlen_user(const char *src) */ static inline unsigned long __must_check -__clear_user(void *to, unsigned long n) +__clear_user(void __user *to, unsigned long n) { if (!access_ok(VERIFY_WRITE, to, n)) return n; - memset(to, 0, n); + memset((void __force *)to, 0, n); return 0; } diff --git a/arch/blackfin/include/asm/unistd.h b/arch/blackfin/include/asm/unistd.h index 0ccba60b9cc..c8c8ff9eff6 100644 --- a/arch/blackfin/include/asm/unistd.h +++ b/arch/blackfin/include/asm/unistd.h @@ -3,457 +3,20 @@ * * Licensed under the GPL-2 or later. */ - #ifndef __ASM_BFIN_UNISTD_H #define __ASM_BFIN_UNISTD_H -/* - * This file contains the system call numbers. - */ -#define __NR_restart_syscall 0 -#define __NR_exit 1 -#define __NR_fork 2 -#define __NR_read 3 -#define __NR_write 4 -#define __NR_open 5 -#define __NR_close 6 - /* 7 __NR_waitpid obsolete */ -#define __NR_creat 8 -#define __NR_link 9 -#define __NR_unlink 10 -#define __NR_execve 11 -#define __NR_chdir 12 -#define __NR_time 13 -#define __NR_mknod 14 -#define __NR_chmod 15 -#define __NR_chown 16 - /* 17 __NR_break obsolete */ - /* 18 __NR_oldstat obsolete */ -#define __NR_lseek 19 -#define __NR_getpid 20 -#define __NR_mount 21 - /* 22 __NR_umount obsolete */ -#define __NR_setuid 23 -#define __NR_getuid 24 -#define __NR_stime 25 -#define __NR_ptrace 26 -#define __NR_alarm 27 - /* 28 __NR_oldfstat obsolete */ -#define __NR_pause 29 - /* 30 __NR_utime obsolete */ - /* 31 __NR_stty obsolete */ - /* 32 __NR_gtty obsolete */ -#define __NR_access 33 -#define __NR_nice 34 - /* 35 __NR_ftime obsolete */ -#define __NR_sync 36 -#define __NR_kill 37 -#define __NR_rename 38 -#define __NR_mkdir 39 -#define __NR_rmdir 40 -#define __NR_dup 41 -#define __NR_pipe 42 -#define __NR_times 43 - /* 44 __NR_prof obsolete */ -#define __NR_brk 45 -#define __NR_setgid 46 -#define __NR_getgid 47 - /* 48 __NR_signal obsolete */ -#define __NR_geteuid 49 -#define __NR_getegid 50 -#define __NR_acct 51 -#define __NR_umount2 52 - /* 53 __NR_lock obsolete */ -#define __NR_ioctl 54 -#define __NR_fcntl 55 - /* 56 __NR_mpx obsolete */ -#define __NR_setpgid 57 - /* 58 __NR_ulimit obsolete */ - /* 59 __NR_oldolduname obsolete */ -#define __NR_umask 60 -#define __NR_chroot 61 -#define __NR_ustat 62 -#define __NR_dup2 63 -#define __NR_getppid 64 -#define __NR_getpgrp 65 -#define __NR_setsid 66 - /* 67 __NR_sigaction obsolete */ -#define __NR_sgetmask 68 -#define __NR_ssetmask 69 -#define __NR_setreuid 70 -#define __NR_setregid 71 - /* 72 __NR_sigsuspend obsolete */ - /* 73 __NR_sigpending obsolete */ -#define __NR_sethostname 74 -#define __NR_setrlimit 75 - /* 76 __NR_old_getrlimit obsolete */ -#define __NR_getrusage 77 -#define __NR_gettimeofday 78 -#define __NR_settimeofday 79 -#define __NR_getgroups 80 -#define __NR_setgroups 81 - /* 82 __NR_select obsolete */ -#define __NR_symlink 83 - /* 84 __NR_oldlstat obsolete */ -#define __NR_readlink 85 - /* 86 __NR_uselib obsolete */ - /* 87 __NR_swapon obsolete */ -#define __NR_reboot 88 - /* 89 __NR_readdir obsolete */ - /* 90 __NR_mmap obsolete */ -#define __NR_munmap 91 -#define __NR_truncate 92 -#define __NR_ftruncate 93 -#define __NR_fchmod 94 -#define __NR_fchown 95 -#define __NR_getpriority 96 -#define __NR_setpriority 97 - /* 98 __NR_profil obsolete */ -#define __NR_statfs 99 -#define __NR_fstatfs 100 - /* 101 __NR_ioperm */ - /* 102 __NR_socketcall obsolete */ -#define __NR_syslog 103 -#define __NR_setitimer 104 -#define __NR_getitimer 105 -#define __NR_stat 106 -#define __NR_lstat 107 -#define __NR_fstat 108 - /* 109 __NR_olduname obsolete */ - /* 110 __NR_iopl obsolete */ -#define __NR_vhangup 111 - /* 112 __NR_idle obsolete */ - /* 113 __NR_vm86old */ -#define __NR_wait4 114 - /* 115 __NR_swapoff obsolete */ -#define __NR_sysinfo 116 - /* 117 __NR_ipc oboslete */ -#define __NR_fsync 118 - /* 119 __NR_sigreturn obsolete */ -#define __NR_clone 120 -#define __NR_setdomainname 121 -#define __NR_uname 122 - /* 123 __NR_modify_ldt obsolete */ -#define __NR_adjtimex 124 -#define __NR_mprotect 125 - /* 126 __NR_sigprocmask obsolete */ - /* 127 __NR_create_module obsolete */ -#define __NR_init_module 128 -#define __NR_delete_module 129 - /* 130 __NR_get_kernel_syms obsolete */ -#define __NR_quotactl 131 -#define __NR_getpgid 132 -#define __NR_fchdir 133 -#define __NR_bdflush 134 - /* 135 was sysfs */ -#define __NR_personality 136 - /* 137 __NR_afs_syscall */ -#define __NR_setfsuid 138 -#define __NR_setfsgid 139 -#define __NR__llseek 140 -#define __NR_getdents 141 - /* 142 __NR__newselect obsolete */ -#define __NR_flock 143 - /* 144 __NR_msync obsolete */ -#define __NR_readv 145 -#define __NR_writev 146 -#define __NR_getsid 147 -#define __NR_fdatasync 148 -#define __NR__sysctl 149 - /* 150 __NR_mlock */ - /* 151 __NR_munlock */ - /* 152 __NR_mlockall */ - /* 153 __NR_munlockall */ -#define __NR_sched_setparam 154 -#define __NR_sched_getparam 155 -#define __NR_sched_setscheduler 156 -#define __NR_sched_getscheduler 157 -#define __NR_sched_yield 158 -#define __NR_sched_get_priority_max 159 -#define __NR_sched_get_priority_min 160 -#define __NR_sched_rr_get_interval 161 -#define __NR_nanosleep 162 -#define __NR_mremap 163 -#define __NR_setresuid 164 -#define __NR_getresuid 165 - /* 166 __NR_vm86 */ - /* 167 __NR_query_module */ - /* 168 __NR_poll */ -#define __NR_nfsservctl 169 -#define __NR_setresgid 170 -#define __NR_getresgid 171 -#define __NR_prctl 172 -#define __NR_rt_sigreturn 173 -#define __NR_rt_sigaction 174 -#define __NR_rt_sigprocmask 175 -#define __NR_rt_sigpending 176 -#define __NR_rt_sigtimedwait 177 -#define __NR_rt_sigqueueinfo 178 -#define __NR_rt_sigsuspend 179 -#define __NR_pread 180 -#define __NR_pwrite 181 -#define __NR_lchown 182 -#define __NR_getcwd 183 -#define __NR_capget 184 -#define __NR_capset 185 -#define __NR_sigaltstack 186 -#define __NR_sendfile 187 - /* 188 __NR_getpmsg */ - /* 189 __NR_putpmsg */ -#define __NR_vfork 190 -#define __NR_getrlimit 191 -#define __NR_mmap2 192 -#define __NR_truncate64 193 -#define __NR_ftruncate64 194 -#define __NR_stat64 195 -#define __NR_lstat64 196 -#define __NR_fstat64 197 -#define __NR_chown32 198 -#define __NR_getuid32 199 -#define __NR_getgid32 200 -#define __NR_geteuid32 201 -#define __NR_getegid32 202 -#define __NR_setreuid32 203 -#define __NR_setregid32 204 -#define __NR_getgroups32 205 -#define __NR_setgroups32 206 -#define __NR_fchown32 207 -#define __NR_setresuid32 208 -#define __NR_getresuid32 209 -#define __NR_setresgid32 210 -#define __NR_getresgid32 211 -#define __NR_lchown32 212 -#define __NR_setuid32 213 -#define __NR_setgid32 214 -#define __NR_setfsuid32 215 -#define __NR_setfsgid32 216 -#define __NR_pivot_root 217 - /* 218 __NR_mincore */ - /* 219 __NR_madvise */ -#define __NR_getdents64 220 -#define __NR_fcntl64 221 - /* 222 reserved for TUX */ - /* 223 reserved for TUX */ -#define __NR_gettid 224 -#define __NR_readahead 225 -#define __NR_setxattr 226 -#define __NR_lsetxattr 227 -#define __NR_fsetxattr 228 -#define __NR_getxattr 229 -#define __NR_lgetxattr 230 -#define __NR_fgetxattr 231 -#define __NR_listxattr 232 -#define __NR_llistxattr 233 -#define __NR_flistxattr 234 -#define __NR_removexattr 235 -#define __NR_lremovexattr 236 -#define __NR_fremovexattr 237 -#define __NR_tkill 238 -#define __NR_sendfile64 239 -#define __NR_futex 240 -#define __NR_sched_setaffinity 241 -#define __NR_sched_getaffinity 242 - /* 243 __NR_set_thread_area */ - /* 244 __NR_get_thread_area */ -#define __NR_io_setup 245 -#define __NR_io_destroy 246 -#define __NR_io_getevents 247 -#define __NR_io_submit 248 -#define __NR_io_cancel 249 - /* 250 __NR_alloc_hugepages */ - /* 251 __NR_free_hugepages */ -#define __NR_exit_group 252 -#define __NR_lookup_dcookie 253 -#define __NR_bfin_spinlock 254 - -#define __NR_epoll_create 255 -#define __NR_epoll_ctl 256 -#define __NR_epoll_wait 257 - /* 258 __NR_remap_file_pages */ -#define __NR_set_tid_address 259 -#define __NR_timer_create 260 -#define __NR_timer_settime 261 -#define __NR_timer_gettime 262 -#define __NR_timer_getoverrun 263 -#define __NR_timer_delete 264 -#define __NR_clock_settime 265 -#define __NR_clock_gettime 266 -#define __NR_clock_getres 267 -#define __NR_clock_nanosleep 268 -#define __NR_statfs64 269 -#define __NR_fstatfs64 270 -#define __NR_tgkill 271 -#define __NR_utimes 272 -#define __NR_fadvise64_64 273 - /* 274 __NR_vserver */ - /* 275 __NR_mbind */ - /* 276 __NR_get_mempolicy */ - /* 277 __NR_set_mempolicy */ -#define __NR_mq_open 278 -#define __NR_mq_unlink 279 -#define __NR_mq_timedsend 280 -#define __NR_mq_timedreceive 281 -#define __NR_mq_notify 282 -#define __NR_mq_getsetattr 283 -#define __NR_kexec_load 284 -#define __NR_waitid 285 -#define __NR_add_key 286 -#define __NR_request_key 287 -#define __NR_keyctl 288 -#define __NR_ioprio_set 289 -#define __NR_ioprio_get 290 -#define __NR_inotify_init 291 -#define __NR_inotify_add_watch 292 -#define __NR_inotify_rm_watch 293 - /* 294 __NR_migrate_pages */ -#define __NR_openat 295 -#define __NR_mkdirat 296 -#define __NR_mknodat 297 -#define __NR_fchownat 298 -#define __NR_futimesat 299 -#define __NR_fstatat64 300 -#define __NR_unlinkat 301 -#define __NR_renameat 302 -#define __NR_linkat 303 -#define __NR_symlinkat 304 -#define __NR_readlinkat 305 -#define __NR_fchmodat 306 -#define __NR_faccessat 307 -#define __NR_pselect6 308 -#define __NR_ppoll 309 -#define __NR_unshare 310 - -/* Blackfin private syscalls */ -#define __NR_sram_alloc 311 -#define __NR_sram_free 312 -#define __NR_dma_memcpy 313 - -/* socket syscalls */ -#define __NR_accept 314 -#define __NR_bind 315 -#define __NR_connect 316 -#define __NR_getpeername 317 -#define __NR_getsockname 318 -#define __NR_getsockopt 319 -#define __NR_listen 320 -#define __NR_recv 321 -#define __NR_recvfrom 322 -#define __NR_recvmsg 323 -#define __NR_send 324 -#define __NR_sendmsg 325 -#define __NR_sendto 326 -#define __NR_setsockopt 327 -#define __NR_shutdown 328 -#define __NR_socket 329 -#define __NR_socketpair 330 - -/* sysv ipc syscalls */ -#define __NR_semctl 331 -#define __NR_semget 332 -#define __NR_semop 333 -#define __NR_msgctl 334 -#define __NR_msgget 335 -#define __NR_msgrcv 336 -#define __NR_msgsnd 337 -#define __NR_shmat 338 -#define __NR_shmctl 339 -#define __NR_shmdt 340 -#define __NR_shmget 341 - -#define __NR_splice 342 -#define __NR_sync_file_range 343 -#define __NR_tee 344 -#define __NR_vmsplice 345 - -#define __NR_epoll_pwait 346 -#define __NR_utimensat 347 -#define __NR_signalfd 348 -#define __NR_timerfd_create 349 -#define __NR_eventfd 350 -#define __NR_pread64 351 -#define __NR_pwrite64 352 -#define __NR_fadvise64 353 -#define __NR_set_robust_list 354 -#define __NR_get_robust_list 355 -#define __NR_fallocate 356 -#define __NR_semtimedop 357 -#define __NR_timerfd_settime 358 -#define __NR_timerfd_gettime 359 -#define __NR_signalfd4 360 -#define __NR_eventfd2 361 -#define __NR_epoll_create1 362 -#define __NR_dup3 363 -#define __NR_pipe2 364 -#define __NR_inotify_init1 365 -#define __NR_preadv 366 -#define __NR_pwritev 367 -#define __NR_rt_tgsigqueueinfo 368 -#define __NR_perf_event_open 369 -#define __NR_recvmmsg 370 -#define __NR_fanotify_init 371 -#define __NR_fanotify_mark 372 -#define __NR_prlimit64 373 -#define __NR_cacheflush 374 -#define __NR_name_to_handle_at 375 -#define __NR_open_by_handle_at 376 -#define __NR_clock_adjtime 377 -#define __NR_syncfs 378 -#define __NR_setns 379 -#define __NR_sendmmsg 380 -#define __NR_syscall 381 -#define NR_syscalls __NR_syscall +#include <uapi/asm/unistd.h> -/* Old optional stuff no one actually uses */ -#define __IGNORE_sysfs -#define __IGNORE_uselib - -/* Implement the newer interfaces */ -#define __IGNORE_mmap -#define __IGNORE_poll -#define __IGNORE_select -#define __IGNORE_utime - -/* Not relevant on no-mmu */ -#define __IGNORE_swapon -#define __IGNORE_swapoff -#define __IGNORE_msync -#define __IGNORE_mlock -#define __IGNORE_munlock -#define __IGNORE_mlockall -#define __IGNORE_munlockall -#define __IGNORE_mincore -#define __IGNORE_madvise -#define __IGNORE_remap_file_pages -#define __IGNORE_mbind -#define __IGNORE_get_mempolicy -#define __IGNORE_set_mempolicy -#define __IGNORE_migrate_pages -#define __IGNORE_move_pages -#define __IGNORE_getcpu - -#ifdef __KERNEL__ -#define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_STAT64 #define __ARCH_WANT_SYS_ALARM #define __ARCH_WANT_SYS_GETHOSTNAME #define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_SGETMASK #define __ARCH_WANT_SYS_TIME #define __ARCH_WANT_SYS_FADVISE64 #define __ARCH_WANT_SYS_GETPGRP #define __ARCH_WANT_SYS_LLSEEK #define __ARCH_WANT_SYS_NICE -#define __ARCH_WANT_SYS_RT_SIGACTION -#define __ARCH_WANT_SYS_RT_SIGSUSPEND - -/* - * "Conditional" syscalls - * - * What we want is __attribute__((weak,alias("sys_ni_syscall"))), - * but it doesn't work on all toolchains, so we just do it by hand - */ -#define cond_syscall(x) asm(".weak\t_" #x "\n\t.set\t_" #x ",_sys_ni_syscall"); - -#endif /* __KERNEL__ */ +#define __ARCH_WANT_SYS_VFORK #endif /* __ASM_BFIN_UNISTD_H */ diff --git a/arch/blackfin/include/mach-common/irq.h b/arch/blackfin/include/mach-common/irq.h index cab14e911dc..af9fc8171eb 100644 --- a/arch/blackfin/include/mach-common/irq.h +++ b/arch/blackfin/include/mach-common/irq.h @@ -40,8 +40,6 @@ #define IRQ_HWERR 5 /* Hardware Error */ #define IRQ_CORETMR 6 /* Core timer */ -#define BFIN_IRQ(x) ((x) + 7) - #define IVG7 7 #define IVG8 8 #define IVG9 9 @@ -52,6 +50,9 @@ #define IVG14 14 #define IVG15 15 +#define BFIN_IRQ(x) ((x) + IVG7) +#define BFIN_SYSIRQ(x) ((x) - IVG7) + #define NR_IRQS (NR_MACH_IRQS + NR_SPARE_IRQS) #endif diff --git a/arch/blackfin/include/uapi/asm/Kbuild b/arch/blackfin/include/uapi/asm/Kbuild new file mode 100644 index 00000000000..0bd28f77abc --- /dev/null +++ b/arch/blackfin/include/uapi/asm/Kbuild @@ -0,0 +1,19 @@ +# UAPI Header export list +include include/uapi/asm-generic/Kbuild.asm + +header-y += bfin_sport.h +header-y += byteorder.h +header-y += cachectl.h +header-y += fcntl.h +header-y += fixed_code.h +header-y += ioctls.h +header-y += kvm_para.h +header-y += poll.h +header-y += posix_types.h +header-y += ptrace.h +header-y += sigcontext.h +header-y += siginfo.h +header-y += signal.h +header-y += stat.h +header-y += swab.h +header-y += unistd.h diff --git a/arch/blackfin/include/uapi/asm/bfin_sport.h b/arch/blackfin/include/uapi/asm/bfin_sport.h new file mode 100644 index 00000000000..c086de87ee6 --- /dev/null +++ b/arch/blackfin/include/uapi/asm/bfin_sport.h @@ -0,0 +1,136 @@ +/* + * bfin_sport.h - interface to Blackfin SPORTs + * + * Copyright 2004-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _UAPI__BFIN_SPORT_H__ +#define _UAPI__BFIN_SPORT_H__ + +/* Sport mode: it can be set to TDM, i2s or others */ +#define NORM_MODE 0x0 +#define TDM_MODE 0x1 +#define I2S_MODE 0x2 +#define NDSO_MODE 0x3 + +/* Data format, normal, a-law or u-law */ +#define NORM_FORMAT 0x0 +#define ALAW_FORMAT 0x2 +#define ULAW_FORMAT 0x3 + +/* Function driver which use sport must initialize the structure */ +struct sport_config { + /* TDM (multichannels), I2S or other mode */ + unsigned int mode:3; + unsigned int polled; /* use poll instead of irq when set */ + + /* if TDM mode is selected, channels must be set */ + int channels; /* Must be in 8 units */ + unsigned int frame_delay:4; /* Delay between frame sync pulse and first bit */ + + /* I2S mode */ + unsigned int right_first:1; /* Right stereo channel first */ + + /* In mormal mode, the following item need to be set */ + unsigned int lsb_first:1; /* order of transmit or receive data */ + unsigned int fsync:1; /* Frame sync required */ + unsigned int data_indep:1; /* data independent frame sync generated */ + unsigned int act_low:1; /* Active low TFS */ + unsigned int late_fsync:1; /* Late frame sync */ + unsigned int tckfe:1; + unsigned int sec_en:1; /* Secondary side enabled */ + + /* Choose clock source */ + unsigned int int_clk:1; /* Internal or external clock */ + + /* If external clock is used, the following fields are ignored */ + int serial_clk; + int fsync_clk; + + unsigned int data_format:2; /* Normal, u-law or a-law */ + + int word_len; /* How length of the word in bits, 3-32 bits */ + int dma_enabled; +}; + +/* Userspace interface */ +#define SPORT_IOC_MAGIC 'P' +#define SPORT_IOC_CONFIG _IOWR('P', 0x01, struct sport_config) +#define SPORT_IOC_GET_SYSTEMCLOCK _IOR('P', 0x02, unsigned long) +#define SPORT_IOC_SET_BAUDRATE _IOW('P', 0x03, unsigned long) + + +/* SPORT_TCR1 Masks */ +#define TSPEN 0x0001 /* TX enable */ +#define ITCLK 0x0002 /* Internal TX Clock Select */ +#define TDTYPE 0x000C /* TX Data Formatting Select */ +#define DTYPE_NORM 0x0000 /* Data Format Normal */ +#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ +#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ +#define TLSBIT 0x0010 /* TX Bit Order */ +#define ITFS 0x0200 /* Internal TX Frame Sync Select */ +#define TFSR 0x0400 /* TX Frame Sync Required Select */ +#define DITFS 0x0800 /* Data Independent TX Frame Sync Select */ +#define LTFS 0x1000 /* Low TX Frame Sync Select */ +#define LATFS 0x2000 /* Late TX Frame Sync Select */ +#define TCKFE 0x4000 /* TX Clock Falling Edge Select */ + +/* SPORT_TCR2 Masks */ +#define SLEN 0x001F /* SPORT TX Word Length (2 - 31) */ +#define DP_SLEN(x) BFIN_DEPOSIT(SLEN, x) +#define EX_SLEN(x) BFIN_EXTRACT(SLEN, x) +#define TXSE 0x0100 /* TX Secondary Enable */ +#define TSFSE 0x0200 /* TX Stereo Frame Sync Enable */ +#define TRFST 0x0400 /* TX Right-First Data Order */ + +/* SPORT_RCR1 Masks */ +#define RSPEN 0x0001 /* RX enable */ +#define IRCLK 0x0002 /* Internal RX Clock Select */ +#define RDTYPE 0x000C /* RX Data Formatting Select */ +/* DTYPE_* defined above */ +#define RLSBIT 0x0010 /* RX Bit Order */ +#define IRFS 0x0200 /* Internal RX Frame Sync Select */ +#define RFSR 0x0400 /* RX Frame Sync Required Select */ +#define LRFS 0x1000 /* Low RX Frame Sync Select */ +#define LARFS 0x2000 /* Late RX Frame Sync Select */ +#define RCKFE 0x4000 /* RX Clock Falling Edge Select */ + +/* SPORT_RCR2 Masks */ +/* SLEN defined above */ +#define RXSE 0x0100 /* RX Secondary Enable */ +#define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */ +#define RRFST 0x0400 /* Right-First Data Order */ + +/* SPORT_STAT Masks */ +#define RXNE 0x0001 /* RX FIFO Not Empty Status */ +#define RUVF 0x0002 /* RX Underflow Status */ +#define ROVF 0x0004 /* RX Overflow Status */ +#define TXF 0x0008 /* TX FIFO Full Status */ +#define TUVF 0x0010 /* TX Underflow Status */ +#define TOVF 0x0020 /* TX Overflow Status */ +#define TXHRE 0x0040 /* TX Hold Register Empty */ + +/* SPORT_MCMC1 Masks */ +#define SP_WOFF 0x03FF /* Multichannel Window Offset Field */ +#define DP_SP_WOFF(x) BFIN_DEPOSIT(SP_WOFF, x) +#define EX_SP_WOFF(x) BFIN_EXTRACT(SP_WOFF, x) +#define SP_WSIZE 0xF000 /* Multichannel Window Size Field */ +#define DP_SP_WSIZE(x) BFIN_DEPOSIT(SP_WSIZE, x) +#define EX_SP_WSIZE(x) BFIN_EXTRACT(SP_WSIZE, x) + +/* SPORT_MCMC2 Masks */ +#define MCCRM 0x0003 /* Multichannel Clock Recovery Mode */ +#define REC_BYPASS 0x0000 /* Bypass Mode (No Clock Recovery) */ +#define REC_2FROM4 0x0002 /* Recover 2 MHz Clock from 4 MHz Clock */ +#define REC_8FROM16 0x0003 /* Recover 8 MHz Clock from 16 MHz Clock */ +#define MCDTXPE 0x0004 /* Multichannel DMA Transmit Packing */ +#define MCDRXPE 0x0008 /* Multichannel DMA Receive Packing */ +#define MCMEN 0x0010 /* Multichannel Frame Mode Enable */ +#define FSDR 0x0080 /* Multichannel Frame Sync to Data Relationship */ +#define MFD 0xF000 /* Multichannel Frame Delay */ +#define DP_MFD(x) BFIN_DEPOSIT(MFD, x) +#define EX_MFD(x) BFIN_EXTRACT(MFD, x) + +#endif /* _UAPI__BFIN_SPORT_H__ */ diff --git a/arch/blackfin/include/uapi/asm/byteorder.h b/arch/blackfin/include/uapi/asm/byteorder.h new file mode 100644 index 00000000000..3b125da5dcb --- /dev/null +++ b/arch/blackfin/include/uapi/asm/byteorder.h @@ -0,0 +1,6 @@ +#ifndef _UAPI__BFIN_ASM_BYTEORDER_H +#define _UAPI__BFIN_ASM_BYTEORDER_H + +#include <linux/byteorder/little_endian.h> + +#endif /* _UAPI__BFIN_ASM_BYTEORDER_H */ diff --git a/arch/blackfin/include/asm/cachectl.h b/arch/blackfin/include/uapi/asm/cachectl.h index 03255df6c1e..4fdab75dee1 100644 --- a/arch/blackfin/include/asm/cachectl.h +++ b/arch/blackfin/include/uapi/asm/cachectl.h @@ -7,8 +7,8 @@ * Licensed under the GPL-2 or later. */ -#ifndef _ASM_CACHECTL -#define _ASM_CACHECTL +#ifndef _UAPI_ASM_CACHECTL +#define _UAPI_ASM_CACHECTL /* * Options for cacheflush system call @@ -17,4 +17,4 @@ #define DCACHE (1<<1) /* writeback and flush data cache */ #define BCACHE (ICACHE|DCACHE) /* flush both caches */ -#endif /* _ASM_CACHECTL */ +#endif /* _UAPI_ASM_CACHECTL */ diff --git a/arch/blackfin/include/asm/fcntl.h b/arch/blackfin/include/uapi/asm/fcntl.h index 251c911d59c..f51ad9a4f61 100644 --- a/arch/blackfin/include/asm/fcntl.h +++ b/arch/blackfin/include/uapi/asm/fcntl.h @@ -4,8 +4,8 @@ * Licensed under the GPL-2 or later. */ -#ifndef _BFIN_FCNTL_H -#define _BFIN_FCNTL_H +#ifndef _UAPI_BFIN_FCNTL_H +#define _UAPI_BFIN_FCNTL_H #define O_DIRECTORY 040000 /* must be a directory */ #define O_NOFOLLOW 0100000 /* don't follow links */ @@ -14,4 +14,4 @@ #include <asm-generic/fcntl.h> -#endif +#endif /* _UAPI_BFIN_FCNTL_H */ diff --git a/arch/blackfin/include/uapi/asm/fixed_code.h b/arch/blackfin/include/uapi/asm/fixed_code.h new file mode 100644 index 00000000000..3bef1dca379 --- /dev/null +++ b/arch/blackfin/include/uapi/asm/fixed_code.h @@ -0,0 +1,38 @@ +/* + * This file defines the fixed addresses where userspace programs + * can find atomic code sequences. + * + * Copyright 2007-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _UAPI__BFIN_ASM_FIXED_CODE_H__ +#define _UAPI__BFIN_ASM_FIXED_CODE_H__ + + +#ifndef CONFIG_PHY_RAM_BASE_ADDRESS +#define CONFIG_PHY_RAM_BASE_ADDRESS 0x0 +#endif + +#define FIXED_CODE_START (CONFIG_PHY_RAM_BASE_ADDRESS + 0x400) + +#define SIGRETURN_STUB (CONFIG_PHY_RAM_BASE_ADDRESS + 0x400) + +#define ATOMIC_SEQS_START (CONFIG_PHY_RAM_BASE_ADDRESS + 0x410) + +#define ATOMIC_XCHG32 (CONFIG_PHY_RAM_BASE_ADDRESS + 0x410) +#define ATOMIC_CAS32 (CONFIG_PHY_RAM_BASE_ADDRESS + 0x420) +#define ATOMIC_ADD32 (CONFIG_PHY_RAM_BASE_ADDRESS + 0x430) +#define ATOMIC_SUB32 (CONFIG_PHY_RAM_BASE_ADDRESS + 0x440) +#define ATOMIC_IOR32 (CONFIG_PHY_RAM_BASE_ADDRESS + 0x450) +#define ATOMIC_AND32 (CONFIG_PHY_RAM_BASE_ADDRESS + 0x460) +#define ATOMIC_XOR32 (CONFIG_PHY_RAM_BASE_ADDRESS + 0x470) + +#define ATOMIC_SEQS_END (CONFIG_PHY_RAM_BASE_ADDRESS + 0x480) + +#define SAFE_USER_INSTRUCTION (CONFIG_PHY_RAM_BASE_ADDRESS + 0x480) + +#define FIXED_CODE_END (CONFIG_PHY_RAM_BASE_ADDRESS + 0x490) + +#endif /* _UAPI__BFIN_ASM_FIXED_CODE_H__ */ diff --git a/arch/blackfin/include/uapi/asm/ioctls.h b/arch/blackfin/include/uapi/asm/ioctls.h new file mode 100644 index 00000000000..9a41c20fc83 --- /dev/null +++ b/arch/blackfin/include/uapi/asm/ioctls.h @@ -0,0 +1,7 @@ +#ifndef _UAPI__ARCH_BFIN_IOCTLS_H__ +#define _UAPI__ARCH_BFIN_IOCTLS_H__ + +#define FIOQSIZE 0x545E +#include <asm-generic/ioctls.h> + +#endif /* _UAPI__ARCH_BFIN_IOCTLS_H__ */ diff --git a/arch/blackfin/include/asm/poll.h b/arch/blackfin/include/uapi/asm/poll.h index 072d8966c5c..99c7d6816da 100644 --- a/arch/blackfin/include/asm/poll.h +++ b/arch/blackfin/include/uapi/asm/poll.h @@ -5,12 +5,12 @@ * */ -#ifndef __BFIN_POLL_H -#define __BFIN_POLL_H +#ifndef _UAPI__BFIN_POLL_H +#define _UAPI__BFIN_POLL_H #define POLLWRNORM 4 /* POLLOUT */ #define POLLWRBAND 256 #include <asm-generic/poll.h> -#endif +#endif /* _UAPI__BFIN_POLL_H */ diff --git a/arch/blackfin/include/asm/posix_types.h b/arch/blackfin/include/uapi/asm/posix_types.h index 41bc1875c4d..9608ef64dc4 100644 --- a/arch/blackfin/include/asm/posix_types.h +++ b/arch/blackfin/include/uapi/asm/posix_types.h @@ -4,15 +4,12 @@ * Licensed under the GPL-2 or later. */ -#ifndef __ARCH_BFIN_POSIX_TYPES_H -#define __ARCH_BFIN_POSIX_TYPES_H +#ifndef _UAPI__ARCH_BFIN_POSIX_TYPES_H +#define _UAPI__ARCH_BFIN_POSIX_TYPES_H typedef unsigned short __kernel_mode_t; #define __kernel_mode_t __kernel_mode_t -typedef unsigned short __kernel_nlink_t; -#define __kernel_nlink_t __kernel_nlink_t - typedef unsigned int __kernel_ipc_pid_t; #define __kernel_ipc_pid_t __kernel_ipc_pid_t @@ -30,4 +27,4 @@ typedef unsigned short __kernel_old_dev_t; #include <asm-generic/posix_types.h> -#endif +#endif /* _UAPI__ARCH_BFIN_POSIX_TYPES_H */ diff --git a/arch/blackfin/include/uapi/asm/ptrace.h b/arch/blackfin/include/uapi/asm/ptrace.h new file mode 100644 index 00000000000..fd48bd0739d --- /dev/null +++ b/arch/blackfin/include/uapi/asm/ptrace.h @@ -0,0 +1,170 @@ +/* + * Copyright 2004-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _UAPI_BFIN_PTRACE_H +#define _UAPI_BFIN_PTRACE_H + +/* + * GCC defines register number like this: + * ----------------------------- + * 0 - 7 are data registers R0-R7 + * 8 - 15 are address registers P0-P7 + * 16 - 31 dsp registers I/B/L0 -- I/B/L3 & M0--M3 + * 32 - 33 A registers A0 & A1 + * 34 - status register + * ----------------------------- + * + * We follows above, except: + * 32-33 --- Low 32-bit of A0&1 + * 34-35 --- High 8-bit of A0&1 + */ + +#ifndef __ASSEMBLY__ + +struct task_struct; + +/* this struct defines the way the registers are stored on the + stack during a system call. */ + +struct pt_regs { + long orig_pc; + long ipend; + long seqstat; + long rete; + long retn; + long retx; + long pc; /* PC == RETI */ + long rets; + long reserved; /* Used as scratch during system calls */ + long astat; + long lb1; + long lb0; + long lt1; + long lt0; + long lc1; + long lc0; + long a1w; + long a1x; + long a0w; + long a0x; + long b3; + long b2; + long b1; + long b0; + long l3; + long l2; + long l1; + long l0; + long m3; + long m2; + long m1; + long m0; + long i3; + long i2; + long i1; + long i0; + long usp; + long fp; + long p5; + long p4; + long p3; + long p2; + long p1; + long p0; + long r7; + long r6; + long r5; + long r4; + long r3; + long r2; + long r1; + long r0; + long orig_r0; + long orig_p0; + long syscfg; +}; + +/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 /* ptrace signal */ + +#define PTRACE_GETFDPIC 31 /* get the ELF fdpic loadmap address */ +#define PTRACE_GETFDPIC_EXEC 0 /* [addr] request the executable loadmap */ +#define PTRACE_GETFDPIC_INTERP 1 /* [addr] request the interpreter loadmap */ + +#define PS_S (0x0002) + + +#endif /* __ASSEMBLY__ */ + +/* + * Offsets used by 'ptrace' system call interface. + */ + +#define PT_R0 204 +#define PT_R1 200 +#define PT_R2 196 +#define PT_R3 192 +#define PT_R4 188 +#define PT_R5 184 +#define PT_R6 180 +#define PT_R7 176 +#define PT_P0 172 +#define PT_P1 168 +#define PT_P2 164 +#define PT_P3 160 +#define PT_P4 156 +#define PT_P5 152 +#define PT_FP 148 +#define PT_USP 144 +#define PT_I0 140 +#define PT_I1 136 +#define PT_I2 132 +#define PT_I3 128 +#define PT_M0 124 +#define PT_M1 120 +#define PT_M2 116 +#define PT_M3 112 +#define PT_L0 108 +#define PT_L1 104 +#define PT_L2 100 +#define PT_L3 96 +#define PT_B0 92 +#define PT_B1 88 +#define PT_B2 84 +#define PT_B3 80 +#define PT_A0X 76 +#define PT_A0W 72 +#define PT_A1X 68 +#define PT_A1W 64 +#define PT_LC0 60 +#define PT_LC1 56 +#define PT_LT0 52 +#define PT_LT1 48 +#define PT_LB0 44 +#define PT_LB1 40 +#define PT_ASTAT 36 +#define PT_RESERVED 32 +#define PT_RETS 28 +#define PT_PC 24 +#define PT_RETX 20 +#define PT_RETN 16 +#define PT_RETE 12 +#define PT_SEQSTAT 8 +#define PT_IPEND 4 + +#define PT_ORIG_R0 208 +#define PT_ORIG_P0 212 +#define PT_SYSCFG 216 +#define PT_TEXT_ADDR 220 +#define PT_TEXT_END_ADDR 224 +#define PT_DATA_ADDR 228 +#define PT_FDPIC_EXEC 232 +#define PT_FDPIC_INTERP 236 + +#define PT_LAST_PSEUDO PT_FDPIC_INTERP + +#endif /* _UAPI_BFIN_PTRACE_H */ diff --git a/arch/blackfin/include/asm/sigcontext.h b/arch/blackfin/include/uapi/asm/sigcontext.h index 906bdc1f5fd..b58f12dc27b 100644 --- a/arch/blackfin/include/asm/sigcontext.h +++ b/arch/blackfin/include/uapi/asm/sigcontext.h @@ -4,8 +4,8 @@ * Licensed under the GPL-2 or later. */ -#ifndef _ASM_BLACKFIN_SIGCONTEXT_H -#define _ASM_BLACKFIN_SIGCONTEXT_H +#ifndef _UAPI_ASM_BLACKFIN_SIGCONTEXT_H +#define _UAPI_ASM_BLACKFIN_SIGCONTEXT_H /* Add new entries at the end of the structure only. */ struct sigcontext { @@ -58,4 +58,4 @@ struct sigcontext { unsigned long sc_seqstat; }; -#endif +#endif /* _UAPI_ASM_BLACKFIN_SIGCONTEXT_H */ diff --git a/arch/blackfin/include/asm/siginfo.h b/arch/blackfin/include/uapi/asm/siginfo.h index 3e81306394e..c72f4e6e386 100644 --- a/arch/blackfin/include/asm/siginfo.h +++ b/arch/blackfin/include/uapi/asm/siginfo.h @@ -4,8 +4,8 @@ * Licensed under the GPL-2 or later. */ -#ifndef _BFIN_SIGINFO_H -#define _BFIN_SIGINFO_H +#ifndef _UAPI_BFIN_SIGINFO_H +#define _UAPI_BFIN_SIGINFO_H #include <linux/types.h> #include <asm-generic/siginfo.h> @@ -38,4 +38,4 @@ */ #define SEGV_STACKFLOW (__SI_FAULT|3) /* stack overflow */ -#endif +#endif /* _UAPI_BFIN_SIGINFO_H */ diff --git a/arch/blackfin/include/uapi/asm/signal.h b/arch/blackfin/include/uapi/asm/signal.h new file mode 100644 index 00000000000..f0a0d8b6663 --- /dev/null +++ b/arch/blackfin/include/uapi/asm/signal.h @@ -0,0 +1,7 @@ +#ifndef _UAPI_BLACKFIN_SIGNAL_H +#define _UAPI_BLACKFIN_SIGNAL_H + +#define SA_RESTORER 0x04000000 +#include <asm-generic/signal.h> + +#endif /* _UAPI_BLACKFIN_SIGNAL_H */ diff --git a/arch/blackfin/include/asm/stat.h b/arch/blackfin/include/uapi/asm/stat.h index 2e27665c4e9..d3068a750b9 100644 --- a/arch/blackfin/include/asm/stat.h +++ b/arch/blackfin/include/uapi/asm/stat.h @@ -4,8 +4,8 @@ * Licensed under the GPL-2. */ -#ifndef _BFIN_STAT_H -#define _BFIN_STAT_H +#ifndef _UAPI_BFIN_STAT_H +#define _UAPI_BFIN_STAT_H struct stat { unsigned short st_dev; @@ -66,4 +66,4 @@ struct stat64 { unsigned long long st_ino; }; -#endif /* _BFIN_STAT_H */ +#endif /* _UAPI_BFIN_STAT_H */ diff --git a/arch/blackfin/include/asm/swab.h b/arch/blackfin/include/uapi/asm/swab.h index 89de6507ca2..f5626b77684 100644 --- a/arch/blackfin/include/asm/swab.h +++ b/arch/blackfin/include/uapi/asm/swab.h @@ -4,8 +4,8 @@ * Licensed under the GPL-2 or later. */ -#ifndef _BLACKFIN_SWAB_H -#define _BLACKFIN_SWAB_H +#ifndef _UAPI_BLACKFIN_SWAB_H +#define _UAPI_BLACKFIN_SWAB_H #include <linux/types.h> #include <asm-generic/swab.h> @@ -47,4 +47,4 @@ static __inline__ __attribute_const__ __u16 __arch_swab16(__u16 xx) #endif /* __GNUC__ */ -#endif /* _BLACKFIN_SWAB_H */ +#endif /* _UAPI_BLACKFIN_SWAB_H */ diff --git a/arch/blackfin/include/uapi/asm/unistd.h b/arch/blackfin/include/uapi/asm/unistd.h new file mode 100644 index 00000000000..a4511649a86 --- /dev/null +++ b/arch/blackfin/include/uapi/asm/unistd.h @@ -0,0 +1,437 @@ +/* + * Copyright 2004-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _UAPI__ASM_BFIN_UNISTD_H +#define _UAPI__ASM_BFIN_UNISTD_H +/* + * This file contains the system call numbers. + */ +#define __NR_restart_syscall 0 +#define __NR_exit 1 + /* 2 __NR_fork not supported on nommu */ +#define __NR_read 3 +#define __NR_write 4 +#define __NR_open 5 +#define __NR_close 6 + /* 7 __NR_waitpid obsolete */ +#define __NR_creat 8 +#define __NR_link 9 +#define __NR_unlink 10 +#define __NR_execve 11 +#define __NR_chdir 12 +#define __NR_time 13 +#define __NR_mknod 14 +#define __NR_chmod 15 +#define __NR_chown 16 + /* 17 __NR_break obsolete */ + /* 18 __NR_oldstat obsolete */ +#define __NR_lseek 19 +#define __NR_getpid 20 +#define __NR_mount 21 + /* 22 __NR_umount obsolete */ +#define __NR_setuid 23 +#define __NR_getuid 24 +#define __NR_stime 25 +#define __NR_ptrace 26 +#define __NR_alarm 27 + /* 28 __NR_oldfstat obsolete */ +#define __NR_pause 29 + /* 30 __NR_utime obsolete */ + /* 31 __NR_stty obsolete */ + /* 32 __NR_gtty obsolete */ +#define __NR_access 33 +#define __NR_nice 34 + /* 35 __NR_ftime obsolete */ +#define __NR_sync 36 +#define __NR_kill 37 +#define __NR_rename 38 +#define __NR_mkdir 39 +#define __NR_rmdir 40 +#define __NR_dup 41 +#define __NR_pipe 42 +#define __NR_times 43 + /* 44 __NR_prof obsolete */ +#define __NR_brk 45 +#define __NR_setgid 46 +#define __NR_getgid 47 + /* 48 __NR_signal obsolete */ +#define __NR_geteuid 49 +#define __NR_getegid 50 +#define __NR_acct 51 +#define __NR_umount2 52 + /* 53 __NR_lock obsolete */ +#define __NR_ioctl 54 +#define __NR_fcntl 55 + /* 56 __NR_mpx obsolete */ +#define __NR_setpgid 57 + /* 58 __NR_ulimit obsolete */ + /* 59 __NR_oldolduname obsolete */ +#define __NR_umask 60 +#define __NR_chroot 61 +#define __NR_ustat 62 +#define __NR_dup2 63 +#define __NR_getppid 64 +#define __NR_getpgrp 65 +#define __NR_setsid 66 + /* 67 __NR_sigaction obsolete */ +#define __NR_sgetmask 68 +#define __NR_ssetmask 69 +#define __NR_setreuid 70 +#define __NR_setregid 71 + /* 72 __NR_sigsuspend obsolete */ + /* 73 __NR_sigpending obsolete */ +#define __NR_sethostname 74 +#define __NR_setrlimit 75 + /* 76 __NR_old_getrlimit obsolete */ +#define __NR_getrusage 77 +#define __NR_gettimeofday 78 +#define __NR_settimeofday 79 +#define __NR_getgroups 80 +#define __NR_setgroups 81 + /* 82 __NR_select obsolete */ +#define __NR_symlink 83 + /* 84 __NR_oldlstat obsolete */ +#define __NR_readlink 85 + /* 86 __NR_uselib obsolete */ + /* 87 __NR_swapon obsolete */ +#define __NR_reboot 88 + /* 89 __NR_readdir obsolete */ + /* 90 __NR_mmap obsolete */ +#define __NR_munmap 91 +#define __NR_truncate 92 +#define __NR_ftruncate 93 +#define __NR_fchmod 94 +#define __NR_fchown 95 +#define __NR_getpriority 96 +#define __NR_setpriority 97 + /* 98 __NR_profil obsolete */ +#define __NR_statfs 99 +#define __NR_fstatfs 100 + /* 101 __NR_ioperm */ + /* 102 __NR_socketcall obsolete */ +#define __NR_syslog 103 +#define __NR_setitimer 104 +#define __NR_getitimer 105 +#define __NR_stat 106 +#define __NR_lstat 107 +#define __NR_fstat 108 + /* 109 __NR_olduname obsolete */ + /* 110 __NR_iopl obsolete */ +#define __NR_vhangup 111 + /* 112 __NR_idle obsolete */ + /* 113 __NR_vm86old */ +#define __NR_wait4 114 + /* 115 __NR_swapoff obsolete */ +#define __NR_sysinfo 116 + /* 117 __NR_ipc oboslete */ +#define __NR_fsync 118 + /* 119 __NR_sigreturn obsolete */ +#define __NR_clone 120 +#define __NR_setdomainname 121 +#define __NR_uname 122 + /* 123 __NR_modify_ldt obsolete */ +#define __NR_adjtimex 124 +#define __NR_mprotect 125 + /* 126 __NR_sigprocmask obsolete */ + /* 127 __NR_create_module obsolete */ +#define __NR_init_module 128 +#define __NR_delete_module 129 + /* 130 __NR_get_kernel_syms obsolete */ +#define __NR_quotactl 131 +#define __NR_getpgid 132 +#define __NR_fchdir 133 +#define __NR_bdflush 134 + /* 135 was sysfs */ +#define __NR_personality 136 + /* 137 __NR_afs_syscall */ +#define __NR_setfsuid 138 +#define __NR_setfsgid 139 +#define __NR__llseek 140 +#define __NR_getdents 141 + /* 142 __NR__newselect obsolete */ +#define __NR_flock 143 + /* 144 __NR_msync obsolete */ +#define __NR_readv 145 +#define __NR_writev 146 +#define __NR_getsid 147 +#define __NR_fdatasync 148 +#define __NR__sysctl 149 + /* 150 __NR_mlock */ + /* 151 __NR_munlock */ + /* 152 __NR_mlockall */ + /* 153 __NR_munlockall */ +#define __NR_sched_setparam 154 +#define __NR_sched_getparam 155 +#define __NR_sched_setscheduler 156 +#define __NR_sched_getscheduler 157 +#define __NR_sched_yield 158 +#define __NR_sched_get_priority_max 159 +#define __NR_sched_get_priority_min 160 +#define __NR_sched_rr_get_interval 161 +#define __NR_nanosleep 162 +#define __NR_mremap 163 +#define __NR_setresuid 164 +#define __NR_getresuid 165 + /* 166 __NR_vm86 */ + /* 167 __NR_query_module */ + /* 168 __NR_poll */ +#define __NR_nfsservctl 169 +#define __NR_setresgid 170 +#define __NR_getresgid 171 +#define __NR_prctl 172 +#define __NR_rt_sigreturn 173 +#define __NR_rt_sigaction 174 +#define __NR_rt_sigprocmask 175 +#define __NR_rt_sigpending 176 +#define __NR_rt_sigtimedwait 177 +#define __NR_rt_sigqueueinfo 178 +#define __NR_rt_sigsuspend 179 +#define __NR_pread 180 +#define __NR_pwrite 181 +#define __NR_lchown 182 +#define __NR_getcwd 183 +#define __NR_capget 184 +#define __NR_capset 185 +#define __NR_sigaltstack 186 +#define __NR_sendfile 187 + /* 188 __NR_getpmsg */ + /* 189 __NR_putpmsg */ +#define __NR_vfork 190 +#define __NR_getrlimit 191 +#define __NR_mmap2 192 +#define __NR_truncate64 193 +#define __NR_ftruncate64 194 +#define __NR_stat64 195 +#define __NR_lstat64 196 +#define __NR_fstat64 197 +#define __NR_chown32 198 +#define __NR_getuid32 199 +#define __NR_getgid32 200 +#define __NR_geteuid32 201 +#define __NR_getegid32 202 +#define __NR_setreuid32 203 +#define __NR_setregid32 204 +#define __NR_getgroups32 205 +#define __NR_setgroups32 206 +#define __NR_fchown32 207 +#define __NR_setresuid32 208 +#define __NR_getresuid32 209 +#define __NR_setresgid32 210 +#define __NR_getresgid32 211 +#define __NR_lchown32 212 +#define __NR_setuid32 213 +#define __NR_setgid32 214 +#define __NR_setfsuid32 215 +#define __NR_setfsgid32 216 +#define __NR_pivot_root 217 + /* 218 __NR_mincore */ + /* 219 __NR_madvise */ +#define __NR_getdents64 220 +#define __NR_fcntl64 221 + /* 222 reserved for TUX */ + /* 223 reserved for TUX */ +#define __NR_gettid 224 +#define __NR_readahead 225 +#define __NR_setxattr 226 +#define __NR_lsetxattr 227 +#define __NR_fsetxattr 228 +#define __NR_getxattr 229 +#define __NR_lgetxattr 230 +#define __NR_fgetxattr 231 +#define __NR_listxattr 232 +#define __NR_llistxattr 233 +#define __NR_flistxattr 234 +#define __NR_removexattr 235 +#define __NR_lremovexattr 236 +#define __NR_fremovexattr 237 +#define __NR_tkill 238 +#define __NR_sendfile64 239 +#define __NR_futex 240 +#define __NR_sched_setaffinity 241 +#define __NR_sched_getaffinity 242 + /* 243 __NR_set_thread_area */ + /* 244 __NR_get_thread_area */ +#define __NR_io_setup 245 +#define __NR_io_destroy 246 +#define __NR_io_getevents 247 +#define __NR_io_submit 248 +#define __NR_io_cancel 249 + /* 250 __NR_alloc_hugepages */ + /* 251 __NR_free_hugepages */ +#define __NR_exit_group 252 +#define __NR_lookup_dcookie 253 +#define __NR_bfin_spinlock 254 + +#define __NR_epoll_create 255 +#define __NR_epoll_ctl 256 +#define __NR_epoll_wait 257 + /* 258 __NR_remap_file_pages */ +#define __NR_set_tid_address 259 +#define __NR_timer_create 260 +#define __NR_timer_settime 261 +#define __NR_timer_gettime 262 +#define __NR_timer_getoverrun 263 +#define __NR_timer_delete 264 +#define __NR_clock_settime 265 +#define __NR_clock_gettime 266 +#define __NR_clock_getres 267 +#define __NR_clock_nanosleep 268 +#define __NR_statfs64 269 +#define __NR_fstatfs64 270 +#define __NR_tgkill 271 +#define __NR_utimes 272 +#define __NR_fadvise64_64 273 + /* 274 __NR_vserver */ + /* 275 __NR_mbind */ + /* 276 __NR_get_mempolicy */ + /* 277 __NR_set_mempolicy */ +#define __NR_mq_open 278 +#define __NR_mq_unlink 279 +#define __NR_mq_timedsend 280 +#define __NR_mq_timedreceive 281 +#define __NR_mq_notify 282 +#define __NR_mq_getsetattr 283 +#define __NR_kexec_load 284 +#define __NR_waitid 285 +#define __NR_add_key 286 +#define __NR_request_key 287 +#define __NR_keyctl 288 +#define __NR_ioprio_set 289 +#define __NR_ioprio_get 290 +#define __NR_inotify_init 291 +#define __NR_inotify_add_watch 292 +#define __NR_inotify_rm_watch 293 + /* 294 __NR_migrate_pages */ +#define __NR_openat 295 +#define __NR_mkdirat 296 +#define __NR_mknodat 297 +#define __NR_fchownat 298 +#define __NR_futimesat 299 +#define __NR_fstatat64 300 +#define __NR_unlinkat 301 +#define __NR_renameat 302 +#define __NR_linkat 303 +#define __NR_symlinkat 304 +#define __NR_readlinkat 305 +#define __NR_fchmodat 306 +#define __NR_faccessat 307 +#define __NR_pselect6 308 +#define __NR_ppoll 309 +#define __NR_unshare 310 + +/* Blackfin private syscalls */ +#define __NR_sram_alloc 311 +#define __NR_sram_free 312 +#define __NR_dma_memcpy 313 + +/* socket syscalls */ +#define __NR_accept 314 +#define __NR_bind 315 +#define __NR_connect 316 +#define __NR_getpeername 317 +#define __NR_getsockname 318 +#define __NR_getsockopt 319 +#define __NR_listen 320 +#define __NR_recv 321 +#define __NR_recvfrom 322 +#define __NR_recvmsg 323 +#define __NR_send 324 +#define __NR_sendmsg 325 +#define __NR_sendto 326 +#define __NR_setsockopt 327 +#define __NR_shutdown 328 +#define __NR_socket 329 +#define __NR_socketpair 330 + +/* sysv ipc syscalls */ +#define __NR_semctl 331 +#define __NR_semget 332 +#define __NR_semop 333 +#define __NR_msgctl 334 +#define __NR_msgget 335 +#define __NR_msgrcv 336 +#define __NR_msgsnd 337 +#define __NR_shmat 338 +#define __NR_shmctl 339 +#define __NR_shmdt 340 +#define __NR_shmget 341 + +#define __NR_splice 342 +#define __NR_sync_file_range 343 +#define __NR_tee 344 +#define __NR_vmsplice 345 + +#define __NR_epoll_pwait 346 +#define __NR_utimensat 347 +#define __NR_signalfd 348 +#define __NR_timerfd_create 349 +#define __NR_eventfd 350 +#define __NR_pread64 351 +#define __NR_pwrite64 352 +#define __NR_fadvise64 353 +#define __NR_set_robust_list 354 +#define __NR_get_robust_list 355 +#define __NR_fallocate 356 +#define __NR_semtimedop 357 +#define __NR_timerfd_settime 358 +#define __NR_timerfd_gettime 359 +#define __NR_signalfd4 360 +#define __NR_eventfd2 361 +#define __NR_epoll_create1 362 +#define __NR_dup3 363 +#define __NR_pipe2 364 +#define __NR_inotify_init1 365 +#define __NR_preadv 366 +#define __NR_pwritev 367 +#define __NR_rt_tgsigqueueinfo 368 +#define __NR_perf_event_open 369 +#define __NR_recvmmsg 370 +#define __NR_fanotify_init 371 +#define __NR_fanotify_mark 372 +#define __NR_prlimit64 373 +#define __NR_cacheflush 374 +#define __NR_name_to_handle_at 375 +#define __NR_open_by_handle_at 376 +#define __NR_clock_adjtime 377 +#define __NR_syncfs 378 +#define __NR_setns 379 +#define __NR_sendmmsg 380 +#define __NR_process_vm_readv 381 +#define __NR_process_vm_writev 382 + +#define __NR_syscall 383 +#define NR_syscalls __NR_syscall + +/* Old optional stuff no one actually uses */ +#define __IGNORE_sysfs +#define __IGNORE_uselib + +/* Implement the newer interfaces */ +#define __IGNORE_mmap +#define __IGNORE_poll +#define __IGNORE_select +#define __IGNORE_utime + +/* Not relevant on no-mmu */ +#define __IGNORE_swapon +#define __IGNORE_swapoff +#define __IGNORE_msync +#define __IGNORE_mlock +#define __IGNORE_munlock +#define __IGNORE_mlockall +#define __IGNORE_munlockall +#define __IGNORE_mincore +#define __IGNORE_madvise +#define __IGNORE_remap_file_pages +#define __IGNORE_mbind +#define __IGNORE_get_mempolicy +#define __IGNORE_set_mempolicy +#define __IGNORE_migrate_pages +#define __IGNORE_move_pages +#define __IGNORE_getcpu + + +#endif /* _UAPI__ASM_BFIN_UNISTD_H */ diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile index 1f88edd4572..703dc7cf2ec 100644 --- a/arch/blackfin/kernel/Makefile +++ b/arch/blackfin/kernel/Makefile @@ -2,12 +2,12 @@ # arch/blackfin/kernel/Makefile # -extra-y := init_task.o vmlinux.lds +extra-y := vmlinux.lds obj-y := \ entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \ sys_bfin.o traps.o irqchip.o dma-mapping.o flat.o \ - fixed_code.o reboot.o bfin_gpio.o bfin_dma_5xx.o \ + fixed_code.o reboot.o bfin_dma.o \ exception.o dumpstack.o ifeq ($(CONFIG_GENERIC_CLOCKEVENTS),y) @@ -16,12 +16,12 @@ else obj-y += time.o endif +obj-$(CONFIG_GPIO_ADI) += bfin_gpio.o obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o obj-$(CONFIG_FUNCTION_TRACER) += ftrace-entry.o obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o CFLAGS_REMOVE_ftrace.o = -pg -obj-$(CONFIG_HAVE_PWM) += pwm.o obj-$(CONFIG_IPIPE) += ipipe.o obj-$(CONFIG_BFIN_GPTIMERS) += gptimers.o obj-$(CONFIG_CPLB_INFO) += cplbinfo.o diff --git a/arch/blackfin/kernel/asm-offsets.c b/arch/blackfin/kernel/asm-offsets.c index 17e35465a41..37fcae95021 100644 --- a/arch/blackfin/kernel/asm-offsets.c +++ b/arch/blackfin/kernel/asm-offsets.c @@ -14,6 +14,7 @@ #include <linux/irq.h> #include <linux/thread_info.h> #include <linux/kbuild.h> +#include <asm/pda.h> int main(void) { diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma.c index 71dbaa4a48a..4a32f2dd5dd 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma.c @@ -1,5 +1,5 @@ /* - * bfin_dma_5xx.c - Blackfin DMA implementation + * bfin_dma.c - Blackfin DMA implementation * * Copyright 2004-2008 Analog Devices Inc. * @@ -45,9 +45,15 @@ static int __init blackfin_dma_init(void) atomic_set(&dma_ch[i].chan_status, 0); dma_ch[i].regs = dma_io_base_addr[i]; } +#if defined(CH_MEM_STREAM3_SRC) && defined(CONFIG_BF60x) + /* Mark MEMDMA Channel 3 as requested since we're using it internally */ + request_dma(CH_MEM_STREAM3_DEST, "Blackfin dma_memcpy"); + request_dma(CH_MEM_STREAM3_SRC, "Blackfin dma_memcpy"); +#else /* Mark MEMDMA Channel 0 as requested since we're using it internally */ request_dma(CH_MEM_STREAM0_DEST, "Blackfin dma_memcpy"); request_dma(CH_MEM_STREAM0_SRC, "Blackfin dma_memcpy"); +#endif #if defined(CONFIG_DEB_DMA_URGENT) bfin_write_EBIU_DDRQUE(bfin_read_EBIU_DDRQUE() @@ -84,7 +90,8 @@ static const struct file_operations proc_dma_operations = { static int __init proc_dma_init(void) { - return proc_create("dma", 0, NULL, &proc_dma_operations) != NULL; + proc_create("dma", 0, NULL, &proc_dma_operations); + return 0; } late_initcall(proc_dma_init); #endif @@ -204,6 +211,7 @@ EXPORT_SYMBOL(free_dma); # ifndef MAX_DMA_SUSPEND_CHANNELS # define MAX_DMA_SUSPEND_CHANNELS MAX_DMA_CHANNELS # endif +# ifndef CONFIG_BF60x int blackfin_dma_suspend(void) { int i; @@ -213,11 +221,13 @@ int blackfin_dma_suspend(void) printk(KERN_ERR "DMA Channel %d failed to suspend\n", i); return -EBUSY; } - if (i < MAX_DMA_SUSPEND_CHANNELS) dma_ch[i].saved_peripheral_map = dma_ch[i].regs->peripheral_map; } +#if ANOMALY_05000480 + bfin_write_DMAC_TC_PER(0x0); +#endif return 0; } @@ -227,12 +237,24 @@ void blackfin_dma_resume(void) for (i = 0; i < MAX_DMA_CHANNELS; ++i) { dma_ch[i].regs->cfg = 0; - if (i < MAX_DMA_SUSPEND_CHANNELS) dma_ch[i].regs->peripheral_map = dma_ch[i].saved_peripheral_map; } +#if ANOMALY_05000480 + bfin_write_DMAC_TC_PER(0x0111); +#endif +} +# else +int blackfin_dma_suspend(void) +{ + return 0; +} + +void blackfin_dma_resume(void) +{ } #endif +#endif /** * blackfin_dma_early_init - minimal DMA init @@ -273,10 +295,10 @@ void __init early_dma_memcpy(void *pdst, const void *psrc, size_t size) src_ch = (struct dma_register *)MDMA_S0_NEXT_DESC_PTR; } - if (!bfin_read16(&src_ch->cfg)) + if (!DMA_MMR_READ(&src_ch->cfg)) break; - else if (bfin_read16(&dst_ch->irq_status) & DMA_DONE) { - bfin_write16(&src_ch->cfg, 0); + else if (DMA_MMR_READ(&dst_ch->irq_status) & DMA_DONE) { + DMA_MMR_WRITE(&src_ch->cfg, 0); break; } } @@ -289,22 +311,31 @@ void __init early_dma_memcpy(void *pdst, const void *psrc, size_t size) /* Destination */ bfin_write32(&dst_ch->start_addr, dst); - bfin_write16(&dst_ch->x_count, size >> 2); - bfin_write16(&dst_ch->x_modify, 1 << 2); - bfin_write16(&dst_ch->irq_status, DMA_DONE | DMA_ERR); + DMA_MMR_WRITE(&dst_ch->x_count, size >> 2); + DMA_MMR_WRITE(&dst_ch->x_modify, 1 << 2); + DMA_MMR_WRITE(&dst_ch->irq_status, DMA_DONE | DMA_ERR); /* Source */ bfin_write32(&src_ch->start_addr, src); - bfin_write16(&src_ch->x_count, size >> 2); - bfin_write16(&src_ch->x_modify, 1 << 2); - bfin_write16(&src_ch->irq_status, DMA_DONE | DMA_ERR); + DMA_MMR_WRITE(&src_ch->x_count, size >> 2); + DMA_MMR_WRITE(&src_ch->x_modify, 1 << 2); + DMA_MMR_WRITE(&src_ch->irq_status, DMA_DONE | DMA_ERR); /* Enable */ - bfin_write16(&src_ch->cfg, DMAEN | WDSIZE_32); - bfin_write16(&dst_ch->cfg, WNR | DI_EN | DMAEN | WDSIZE_32); + DMA_MMR_WRITE(&src_ch->cfg, DMAEN | WDSIZE_32); + DMA_MMR_WRITE(&dst_ch->cfg, WNR | DI_EN_X | DMAEN | WDSIZE_32); /* Since we are atomic now, don't use the workaround ssync */ __builtin_bfin_ssync(); + +#ifdef CONFIG_BF60x + /* Work around a possible MDMA anomaly. Running 2 MDMA channels to + * transfer DDR data to L1 SRAM may corrupt data. + * Should be reverted after this issue is root caused. + */ + while (!(DMA_MMR_READ(&dst_ch->irq_status) & DMA_DONE)) + continue; +#endif } void __init early_dma_memcpy_done(void) @@ -330,6 +361,42 @@ void __init early_dma_memcpy_done(void) __builtin_bfin_ssync(); } +#if defined(CH_MEM_STREAM3_SRC) && defined(CONFIG_BF60x) +#define bfin_read_MDMA_S_CONFIG bfin_read_MDMA_S3_CONFIG +#define bfin_write_MDMA_S_CONFIG bfin_write_MDMA_S3_CONFIG +#define bfin_write_MDMA_S_START_ADDR bfin_write_MDMA_S3_START_ADDR +#define bfin_write_MDMA_S_IRQ_STATUS bfin_write_MDMA_S3_IRQ_STATUS +#define bfin_write_MDMA_S_X_COUNT bfin_write_MDMA_S3_X_COUNT +#define bfin_write_MDMA_S_X_MODIFY bfin_write_MDMA_S3_X_MODIFY +#define bfin_write_MDMA_S_Y_COUNT bfin_write_MDMA_S3_Y_COUNT +#define bfin_write_MDMA_S_Y_MODIFY bfin_write_MDMA_S3_Y_MODIFY +#define bfin_write_MDMA_D_CONFIG bfin_write_MDMA_D3_CONFIG +#define bfin_write_MDMA_D_START_ADDR bfin_write_MDMA_D3_START_ADDR +#define bfin_read_MDMA_D_IRQ_STATUS bfin_read_MDMA_D3_IRQ_STATUS +#define bfin_write_MDMA_D_IRQ_STATUS bfin_write_MDMA_D3_IRQ_STATUS +#define bfin_write_MDMA_D_X_COUNT bfin_write_MDMA_D3_X_COUNT +#define bfin_write_MDMA_D_X_MODIFY bfin_write_MDMA_D3_X_MODIFY +#define bfin_write_MDMA_D_Y_COUNT bfin_write_MDMA_D3_Y_COUNT +#define bfin_write_MDMA_D_Y_MODIFY bfin_write_MDMA_D3_Y_MODIFY +#else +#define bfin_read_MDMA_S_CONFIG bfin_read_MDMA_S0_CONFIG +#define bfin_write_MDMA_S_CONFIG bfin_write_MDMA_S0_CONFIG +#define bfin_write_MDMA_S_START_ADDR bfin_write_MDMA_S0_START_ADDR +#define bfin_write_MDMA_S_IRQ_STATUS bfin_write_MDMA_S0_IRQ_STATUS +#define bfin_write_MDMA_S_X_COUNT bfin_write_MDMA_S0_X_COUNT +#define bfin_write_MDMA_S_X_MODIFY bfin_write_MDMA_S0_X_MODIFY +#define bfin_write_MDMA_S_Y_COUNT bfin_write_MDMA_S0_Y_COUNT +#define bfin_write_MDMA_S_Y_MODIFY bfin_write_MDMA_S0_Y_MODIFY +#define bfin_write_MDMA_D_CONFIG bfin_write_MDMA_D0_CONFIG +#define bfin_write_MDMA_D_START_ADDR bfin_write_MDMA_D0_START_ADDR +#define bfin_read_MDMA_D_IRQ_STATUS bfin_read_MDMA_D0_IRQ_STATUS +#define bfin_write_MDMA_D_IRQ_STATUS bfin_write_MDMA_D0_IRQ_STATUS +#define bfin_write_MDMA_D_X_COUNT bfin_write_MDMA_D0_X_COUNT +#define bfin_write_MDMA_D_X_MODIFY bfin_write_MDMA_D0_X_MODIFY +#define bfin_write_MDMA_D_Y_COUNT bfin_write_MDMA_D0_Y_COUNT +#define bfin_write_MDMA_D_Y_MODIFY bfin_write_MDMA_D0_Y_MODIFY +#endif + /** * __dma_memcpy - program the MDMA registers * @@ -352,8 +419,8 @@ static void __dma_memcpy(u32 daddr, s16 dmod, u32 saddr, s16 smod, size_t cnt, u */ __builtin_bfin_ssync(); - if (bfin_read_MDMA_S0_CONFIG()) - while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)) + if (bfin_read_MDMA_S_CONFIG()) + while (!(bfin_read_MDMA_D_IRQ_STATUS() & DMA_DONE)) continue; if (conf & DMA2D) { @@ -368,39 +435,42 @@ static void __dma_memcpy(u32 daddr, s16 dmod, u32 saddr, s16 smod, size_t cnt, u u32 shift = abs(dmod) >> 1; size_t ycnt = cnt >> (16 - shift); cnt = 1 << (16 - shift); - bfin_write_MDMA_D0_Y_COUNT(ycnt); - bfin_write_MDMA_S0_Y_COUNT(ycnt); - bfin_write_MDMA_D0_Y_MODIFY(dmod); - bfin_write_MDMA_S0_Y_MODIFY(smod); + bfin_write_MDMA_D_Y_COUNT(ycnt); + bfin_write_MDMA_S_Y_COUNT(ycnt); + bfin_write_MDMA_D_Y_MODIFY(dmod); + bfin_write_MDMA_S_Y_MODIFY(smod); } - bfin_write_MDMA_D0_START_ADDR(daddr); - bfin_write_MDMA_D0_X_COUNT(cnt); - bfin_write_MDMA_D0_X_MODIFY(dmod); - bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); + bfin_write_MDMA_D_START_ADDR(daddr); + bfin_write_MDMA_D_X_COUNT(cnt); + bfin_write_MDMA_D_X_MODIFY(dmod); + bfin_write_MDMA_D_IRQ_STATUS(DMA_DONE | DMA_ERR); - bfin_write_MDMA_S0_START_ADDR(saddr); - bfin_write_MDMA_S0_X_COUNT(cnt); - bfin_write_MDMA_S0_X_MODIFY(smod); - bfin_write_MDMA_S0_IRQ_STATUS(DMA_DONE | DMA_ERR); + bfin_write_MDMA_S_START_ADDR(saddr); + bfin_write_MDMA_S_X_COUNT(cnt); + bfin_write_MDMA_S_X_MODIFY(smod); + bfin_write_MDMA_S_IRQ_STATUS(DMA_DONE | DMA_ERR); - bfin_write_MDMA_S0_CONFIG(DMAEN | conf); - bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | conf); + bfin_write_MDMA_S_CONFIG(DMAEN | conf); + if (conf & DMA2D) + bfin_write_MDMA_D_CONFIG(WNR | DI_EN_Y | DMAEN | conf); + else + bfin_write_MDMA_D_CONFIG(WNR | DI_EN_X | DMAEN | conf); spin_unlock_irqrestore(&mdma_lock, flags); SSYNC(); - while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)) - if (bfin_read_MDMA_S0_CONFIG()) + while (!(bfin_read_MDMA_D_IRQ_STATUS() & DMA_DONE)) + if (bfin_read_MDMA_S_CONFIG()) continue; else return; - bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); + bfin_write_MDMA_D_IRQ_STATUS(DMA_DONE | DMA_ERR); - bfin_write_MDMA_S0_CONFIG(0); - bfin_write_MDMA_D0_CONFIG(0); + bfin_write_MDMA_S_CONFIG(0); + bfin_write_MDMA_D_CONFIG(0); } /** @@ -442,8 +512,10 @@ static void *_dma_memcpy(void *pdst, const void *psrc, size_t size) } size >>= shift; +#ifndef DMA_MMR_SIZE_32 if (size > 0x10000) conf |= DMA2D; +#endif __dma_memcpy(dst, mod, src, mod, size, conf); @@ -482,6 +554,9 @@ EXPORT_SYMBOL(dma_memcpy); */ void *dma_memcpy_nocache(void *pdst, const void *psrc, size_t size) { +#ifdef DMA_MMR_SIZE_32 + _dma_memcpy(pdst, psrc, size); +#else size_t bulk, rest; bulk = size & ~0xffff; @@ -489,6 +564,7 @@ void *dma_memcpy_nocache(void *pdst, const void *psrc, size_t size) if (bulk) _dma_memcpy(pdst, psrc, bulk); _dma_memcpy(pdst + bulk, psrc + bulk, rest); +#endif return pdst; } EXPORT_SYMBOL(dma_memcpy_nocache); @@ -508,14 +584,14 @@ void *safe_dma_memcpy(void *dst, const void *src, size_t size) } EXPORT_SYMBOL(safe_dma_memcpy); -static void _dma_out(unsigned long addr, unsigned long buf, unsigned short len, +static void _dma_out(unsigned long addr, unsigned long buf, unsigned DMA_MMR_SIZE_TYPE len, u16 size, u16 dma_size) { blackfin_dcache_flush_range(buf, buf + len * size); __dma_memcpy(addr, 0, buf, size, len, dma_size); } -static void _dma_in(unsigned long addr, unsigned long buf, unsigned short len, +static void _dma_in(unsigned long addr, unsigned long buf, unsigned DMA_MMR_SIZE_TYPE len, u16 size, u16 dma_size) { blackfin_dcache_invalidate_range(buf, buf + len * size); @@ -523,7 +599,7 @@ static void _dma_in(unsigned long addr, unsigned long buf, unsigned short len, } #define MAKE_DMA_IO(io, bwl, isize, dmasize, cnst) \ -void dma_##io##s##bwl(unsigned long addr, cnst void *buf, unsigned short len) \ +void dma_##io##s##bwl(unsigned long addr, cnst void *buf, unsigned DMA_MMR_SIZE_TYPE len) \ { \ _dma_##io(addr, (unsigned long)buf, len, isize, WDSIZE_##dmasize); \ } \ diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index 02796b88443..a017359c182 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -11,11 +11,8 @@ #include <linux/err.h> #include <linux/proc_fs.h> #include <linux/seq_file.h> -#include <asm/blackfin.h> -#include <asm/gpio.h> -#include <asm/portmux.h> +#include <linux/gpio.h> #include <linux/irq.h> -#include <asm/irq_handler.h> #if ANOMALY_05000311 || ANOMALY_05000323 enum { @@ -58,17 +55,6 @@ static struct gpio_port_t * const gpio_array[] = { (struct gpio_port_t *) FIO0_FLAG_D, (struct gpio_port_t *) FIO1_FLAG_D, (struct gpio_port_t *) FIO2_FLAG_D, -#elif defined(CONFIG_BF54x) - (struct gpio_port_t *)PORTA_FER, - (struct gpio_port_t *)PORTB_FER, - (struct gpio_port_t *)PORTC_FER, - (struct gpio_port_t *)PORTD_FER, - (struct gpio_port_t *)PORTE_FER, - (struct gpio_port_t *)PORTF_FER, - (struct gpio_port_t *)PORTG_FER, - (struct gpio_port_t *)PORTH_FER, - (struct gpio_port_t *)PORTI_FER, - (struct gpio_port_t *)PORTJ_FER, #else # error no gpio arrays defined #endif @@ -167,12 +153,6 @@ DECLARE_RESERVED_MAP(gpio_irq, GPIO_BANK_NUM); inline int check_gpio(unsigned gpio) { -#if defined(CONFIG_BF54x) - if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15 - || gpio == GPIO_PH14 || gpio == GPIO_PH15 - || gpio == GPIO_PJ14 || gpio == GPIO_PJ15) - return -EINVAL; -#endif if (gpio >= MAX_BLACKFIN_GPIOS) return -EINVAL; return 0; @@ -210,12 +190,6 @@ static void port_setup(unsigned gpio, unsigned short usage) else *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio); SSYNC(); -#elif defined(CONFIG_BF54x) - if (usage == GPIO_USAGE) - gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio); - else - gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio); - SSYNC(); #endif } @@ -253,7 +227,7 @@ static int portmux_group_check(unsigned short per) u16 ident = P_IDENT(per); u16 function = P_FUNCT2MUX(per); s8 offset = port_mux[ident]; - u16 m, pmux, pfunc; + u16 m, pmux, pfunc, mask; if (offset < 0) return 0; @@ -268,10 +242,12 @@ static int portmux_group_check(unsigned short per) continue; if (offset == 1) - pfunc = (pmux >> offset) & 3; + mask = 3; else - pfunc = (pmux >> offset) & 1; - if (pfunc != function) { + mask = 1; + + pfunc = (pmux >> offset) & mask; + if (pfunc != (function & mask)) { pr_err("pin group conflict! request pin %d func %d conflict with pin %d func %d\n", ident, function, m, pfunc); return -EINVAL; @@ -286,43 +262,21 @@ static void portmux_setup(unsigned short per) u16 ident = P_IDENT(per); u16 function = P_FUNCT2MUX(per); s8 offset = port_mux[ident]; - u16 pmux; + u16 pmux, mask; if (offset == -1) return; pmux = bfin_read_PORT_MUX(); - if (offset != 1) - pmux &= ~(1 << offset); + if (offset == 1) + mask = 3; else - pmux &= ~(3 << 1); - pmux |= (function << offset); - bfin_write_PORT_MUX(pmux); -} -#elif defined(CONFIG_BF54x) -inline void portmux_setup(unsigned short per) -{ - u16 ident = P_IDENT(per); - u16 function = P_FUNCT2MUX(per); - u32 pmux; - - pmux = gpio_array[gpio_bank(ident)]->port_mux; + mask = 1; - pmux &= ~(0x3 << (2 * gpio_sub_n(ident))); - pmux |= (function & 0x3) << (2 * gpio_sub_n(ident)); + pmux &= ~(mask << offset); + pmux |= ((function & mask) << offset); - gpio_array[gpio_bank(ident)]->port_mux = pmux; -} - -inline u16 get_portmux(unsigned short per) -{ - u16 ident = P_IDENT(per); - u32 pmux = gpio_array[gpio_bank(ident)]->port_mux; - return (pmux >> (2 * gpio_sub_n(ident)) & 0x3); -} -static int portmux_group_check(unsigned short per) -{ - return 0; + bfin_write_PORT_MUX(pmux); } #elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x) static int portmux_group_check(unsigned short per) @@ -377,7 +331,6 @@ static int portmux_group_check(unsigned short per) } #endif -#ifndef CONFIG_BF54x /*********************************************************** * * FUNCTIONS: Blackfin General Purpose Ports Access Functions @@ -570,7 +523,7 @@ static const unsigned int sic_iwr_irqs[] = { ************************************************************* * MODIFICATION HISTORY : **************************************************************/ -int gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl) +int bfin_gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl) { unsigned long flags; @@ -589,7 +542,7 @@ int gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl) return 0; } -int bfin_pm_standby_ctrl(unsigned ctrl) +int bfin_gpio_pm_standby_ctrl(unsigned ctrl) { u16 bank, mask, i; @@ -680,53 +633,6 @@ void bfin_gpio_pm_hibernate_restore(void) #endif -#else /* CONFIG_BF54x */ -#ifdef CONFIG_PM - -int bfin_pm_standby_ctrl(unsigned ctrl) -{ - return 0; -} - -void bfin_gpio_pm_hibernate_suspend(void) -{ - int i, bank; - - for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { - bank = gpio_bank(i); - - gpio_bank_saved[bank].fer = gpio_array[bank]->port_fer; - gpio_bank_saved[bank].mux = gpio_array[bank]->port_mux; - gpio_bank_saved[bank].data = gpio_array[bank]->data; - gpio_bank_saved[bank].inen = gpio_array[bank]->inen; - gpio_bank_saved[bank].dir = gpio_array[bank]->dir_set; - } -} - -void bfin_gpio_pm_hibernate_restore(void) -{ - int i, bank; - - for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { - bank = gpio_bank(i); - - gpio_array[bank]->port_mux = gpio_bank_saved[bank].mux; - gpio_array[bank]->port_fer = gpio_bank_saved[bank].fer; - gpio_array[bank]->inen = gpio_bank_saved[bank].inen; - gpio_array[bank]->data_set = gpio_bank_saved[bank].data - & gpio_bank_saved[bank].dir; - gpio_array[bank]->dir_set = gpio_bank_saved[bank].dir; - } -} -#endif - -unsigned short get_gpio_dir(unsigned gpio) -{ - return (0x01 & (gpio_array[gpio_bank(gpio)]->dir_clear >> gpio_sub_n(gpio))); -} -EXPORT_SYMBOL(get_gpio_dir); - -#endif /* CONFIG_BF54x */ /*********************************************************** * @@ -783,11 +689,7 @@ int peripheral_request(unsigned short per, const char *label) * be requested and used by several drivers */ -#ifdef CONFIG_BF54x - if (!((per & P_MAYSHARE) && get_portmux(per) == P_FUNCT2MUX(per))) { -#else if (!(per & P_MAYSHARE)) { -#endif /* * Allow that the identical pin function can * be requested from the same driver twice @@ -936,12 +838,9 @@ int bfin_gpio_request(unsigned gpio, const char *label) if (unlikely(is_reserved(gpio_irq, gpio, 1))) { printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved as gpio-irq!" " (Documentation/blackfin/bfin-gpio-notes.txt)\n", gpio); - } -#ifndef CONFIG_BF54x - else { /* Reset POLAR setting when acquiring a gpio for the first time */ + } else { /* Reset POLAR setting when acquiring a gpio for the first time */ set_gpio_polar(gpio, 0); } -#endif reserve(gpio, gpio); set_label(gpio, label); @@ -1110,11 +1009,7 @@ void bfin_gpio_irq_free(unsigned gpio) static inline void __bfin_gpio_direction_input(unsigned gpio) { -#ifdef CONFIG_BF54x - gpio_array[gpio_bank(gpio)]->dir_clear = gpio_bit(gpio); -#else gpio_array[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio); -#endif gpio_array[gpio_bank(gpio)]->inen |= gpio_bit(gpio); } @@ -1138,17 +1033,7 @@ EXPORT_SYMBOL(bfin_gpio_direction_input); void bfin_gpio_irq_prepare(unsigned gpio) { -#ifdef CONFIG_BF54x - unsigned long flags; -#endif - port_setup(gpio, GPIO_USAGE); - -#ifdef CONFIG_BF54x - flags = hard_local_irq_save(); - __bfin_gpio_direction_input(gpio); - hard_local_irq_restore(flags); -#endif } void bfin_gpio_set_value(unsigned gpio, int arg) @@ -1173,11 +1058,7 @@ int bfin_gpio_direction_output(unsigned gpio, int value) gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio); gpio_set_value(gpio, value); -#ifdef CONFIG_BF54x - gpio_array[gpio_bank(gpio)]->dir_set = gpio_bit(gpio); -#else gpio_array[gpio_bank(gpio)]->dir |= gpio_bit(gpio); -#endif AWA_DUMMY_READ(dir); hard_local_irq_restore(flags); @@ -1188,9 +1069,6 @@ EXPORT_SYMBOL(bfin_gpio_direction_output); int bfin_gpio_get_value(unsigned gpio) { -#ifdef CONFIG_BF54x - return (1 & (gpio_array[gpio_bank(gpio)]->data >> gpio_sub_n(gpio))); -#else unsigned long flags; if (unlikely(get_gpio_edge(gpio))) { @@ -1203,7 +1081,6 @@ int bfin_gpio_get_value(unsigned gpio) return ret; } else return get_gpio_data(gpio); -#endif } EXPORT_SYMBOL(bfin_gpio_get_value); @@ -1263,8 +1140,8 @@ static __init int gpio_register_proc(void) { struct proc_dir_entry *proc_gpio; - proc_gpio = proc_create("gpio", S_IRUGO, NULL, &gpio_proc_ops); - return proc_gpio != NULL; + proc_gpio = proc_create("gpio", 0, NULL, &gpio_proc_ops); + return proc_gpio == NULL; } __initcall(gpio_register_proc); #endif diff --git a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c index 8de92299b3e..b56bd8514b7 100644 --- a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c +++ b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c @@ -120,6 +120,7 @@ MGR_ATTR static noinline int dcplb_miss(unsigned int cpu) d_data = L2_DMEMORY; } else if (addr >= physical_mem_end) { if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE) { +#if defined(CONFIG_ROMFS_ON_MTD) && defined(CONFIG_MTD_ROM) mask = current_rwx_mask[cpu]; if (mask) { int page = (addr - (ASYNC_BANK0_BASE - _ramend)) >> PAGE_SHIFT; @@ -129,6 +130,7 @@ MGR_ATTR static noinline int dcplb_miss(unsigned int cpu) if (mask[idx] & bit) d_data |= CPLB_USER_RD; } +#endif } else if (addr >= BOOT_ROM_START && addr < BOOT_ROM_START + BOOT_ROM_LENGTH && (status & (FAULT_RW | FAULT_USERSUPV)) == FAULT_USERSUPV) { addr &= ~(1 * 1024 * 1024 - 1); diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c index 886e00014d7..b49a53b583d 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c @@ -30,6 +30,7 @@ void __init generate_cplb_tables_cpu(unsigned int cpu) { int i_d, i_i; unsigned long addr; + unsigned long cplb_pageflags, cplb_pagesize; struct cplb_entry *d_tbl = dcplb_tbl[cpu]; struct cplb_entry *i_tbl = icplb_tbl[cpu]; @@ -49,21 +50,38 @@ void __init generate_cplb_tables_cpu(unsigned int cpu) /* Cover kernel memory with 4M pages. */ addr = 0; - for (; addr < memory_start; addr += 4 * 1024 * 1024) { +#ifdef PAGE_SIZE_16MB + cplb_pageflags = PAGE_SIZE_16MB; + cplb_pagesize = SIZE_16M; +#else + cplb_pageflags = PAGE_SIZE_4MB; + cplb_pagesize = SIZE_4M; +#endif + + + for (; addr < memory_start; addr += cplb_pagesize) { d_tbl[i_d].addr = addr; - d_tbl[i_d++].data = SDRAM_DGENERIC | PAGE_SIZE_4MB; + d_tbl[i_d++].data = SDRAM_DGENERIC | cplb_pageflags; i_tbl[i_i].addr = addr; - i_tbl[i_i++].data = SDRAM_IGENERIC | PAGE_SIZE_4MB; + i_tbl[i_i++].data = SDRAM_IGENERIC | cplb_pageflags; } #ifdef CONFIG_ROMKERNEL /* Cover kernel XIP flash area */ +#ifdef CONFIG_BF60x + addr = CONFIG_ROM_BASE & ~(16 * 1024 * 1024 - 1); + d_tbl[i_d].addr = addr; + d_tbl[i_d++].data = SDRAM_DGENERIC | PAGE_SIZE_16MB; + i_tbl[i_i].addr = addr; + i_tbl[i_i++].data = SDRAM_IGENERIC | PAGE_SIZE_16MB; +#else addr = CONFIG_ROM_BASE & ~(4 * 1024 * 1024 - 1); d_tbl[i_d].addr = addr; d_tbl[i_d++].data = SDRAM_DGENERIC | PAGE_SIZE_4MB; i_tbl[i_i].addr = addr; i_tbl[i_i++].data = SDRAM_IGENERIC | PAGE_SIZE_4MB; #endif +#endif /* Cover L1 memory. One 4M area for code and data each is enough. */ if (cpu == 0) { @@ -139,7 +157,7 @@ void __init generate_cplb_tables_all(void) dcplb_bounds[i_d].eaddr = BOOT_ROM_START; dcplb_bounds[i_d++].data = 0; /* BootROM -- largest one should be less than 1 meg. */ - dcplb_bounds[i_d].eaddr = BOOT_ROM_START + (1 * 1024 * 1024); + dcplb_bounds[i_d].eaddr = BOOT_ROM_START + BOOT_ROM_LENGTH; dcplb_bounds[i_d++].data = SDRAM_DGENERIC; if (L2_LENGTH) { /* Addressing hole up to L2 SRAM. */ @@ -178,7 +196,7 @@ void __init generate_cplb_tables_all(void) icplb_bounds[i_i].eaddr = BOOT_ROM_START; icplb_bounds[i_i++].data = 0; /* BootROM -- largest one should be less than 1 meg. */ - icplb_bounds[i_i].eaddr = BOOT_ROM_START + (1 * 1024 * 1024); + icplb_bounds[i_i].eaddr = BOOT_ROM_START + BOOT_ROM_LENGTH; icplb_bounds[i_i++].data = SDRAM_IGENERIC; if (L2_LENGTH) { diff --git a/arch/blackfin/kernel/cplb-nompu/cplbmgr.c b/arch/blackfin/kernel/cplb-nompu/cplbmgr.c index 5b88861d618..79cc0f6dcdd 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbmgr.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbmgr.c @@ -145,7 +145,7 @@ MGR_ATTR static int dcplb_miss(int cpu) unsigned long addr = bfin_read_DCPLB_FAULT_ADDR(); int status = bfin_read_DCPLB_STATUS(); int idx; - unsigned long d_data, base, addr1, eaddr; + unsigned long d_data, base, addr1, eaddr, cplb_pagesize, cplb_pageflags; nr_dcplb_miss[cpu]++; if (unlikely(status & FAULT_USERSUPV)) @@ -167,18 +167,43 @@ MGR_ATTR static int dcplb_miss(int cpu) if (unlikely(d_data == 0)) return CPLB_NO_ADDR_MATCH; - addr1 = addr & ~(SIZE_4M - 1); addr &= ~(SIZE_1M - 1); d_data |= PAGE_SIZE_1MB; - if (addr1 >= base && (addr1 + SIZE_4M) <= eaddr) { + + /* BF60x support large than 4M CPLB page size */ +#ifdef PAGE_SIZE_16MB + cplb_pageflags = PAGE_SIZE_16MB; + cplb_pagesize = SIZE_16M; +#else + cplb_pageflags = PAGE_SIZE_4MB; + cplb_pagesize = SIZE_4M; +#endif + +find_pagesize: + addr1 = addr & ~(cplb_pagesize - 1); + if (addr1 >= base && (addr1 + cplb_pagesize) <= eaddr) { /* * This works because * (PAGE_SIZE_4MB & PAGE_SIZE_1MB) == PAGE_SIZE_1MB. */ - d_data |= PAGE_SIZE_4MB; + d_data |= cplb_pageflags; addr = addr1; + goto found_pagesize; + } else { + if (cplb_pagesize > SIZE_4M) { + cplb_pageflags = PAGE_SIZE_4MB; + cplb_pagesize = SIZE_4M; + goto find_pagesize; + } } +found_pagesize: +#ifdef CONFIG_BF60x + if ((addr >= ASYNC_BANK0_BASE) + && (addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE)) + d_data |= PAGE_SIZE_64MB; +#endif + /* Pick entry to evict */ idx = evict_one_dcplb(cpu); diff --git a/arch/blackfin/kernel/cplbinfo.c b/arch/blackfin/kernel/cplbinfo.c index 0bdaa517a50..5b80d59e66e 100644 --- a/arch/blackfin/kernel/cplbinfo.c +++ b/arch/blackfin/kernel/cplbinfo.c @@ -17,8 +17,13 @@ #include <asm/cplbinit.h> #include <asm/blackfin.h> -static char const page_strtbl[][3] = { "1K", "4K", "1M", "4M" }; -#define page(flags) (((flags) & 0x30000) >> 16) +static char const page_strtbl[][4] = { + "1K", "4K", "1M", "4M", +#ifdef CONFIG_BF60x + "16K", "64K", "16M", "64M", +#endif +}; +#define page(flags) (((flags) & 0x70000) >> 16) #define strpage(flags) page_strtbl[page(flags)] struct cplbinfo_data { @@ -116,14 +121,12 @@ static const struct seq_operations cplbinfo_sops = { static int cplbinfo_open(struct inode *inode, struct file *file) { - struct proc_dir_entry *pde = PDE(file->f_path.dentry->d_inode); char cplb_type; - unsigned int cpu; + unsigned int cpu = (unsigned long)PDE_DATA(file_inode(file)); int ret; struct seq_file *m; struct cplbinfo_data *cdata; - cpu = (unsigned int)pde->data; cplb_type = cpu & CPLBINFO_DCPLB_FLAG ? 'D' : 'I'; cpu &= ~CPLBINFO_DCPLB_FLAG; diff --git a/arch/blackfin/kernel/debug-mmrs.c b/arch/blackfin/kernel/debug-mmrs.c index 92f66482628..947ad083233 100644 --- a/arch/blackfin/kernel/debug-mmrs.c +++ b/arch/blackfin/kernel/debug-mmrs.c @@ -10,6 +10,7 @@ #include <linux/fs.h> #include <linux/kernel.h> #include <linux/module.h> +#include <linux/i2c/bfin_twi.h> #include <asm/blackfin.h> #include <asm/gpio.h> @@ -105,6 +106,7 @@ DEFINE_SYSREG(seqstat, , ); DEFINE_SYSREG(syscfg, , CSYNC()); #define D_SYSREG(sr) debugfs_create_file(#sr, S_IRUSR|S_IWUSR, parent, NULL, &fops_sysreg_##sr) +#ifndef CONFIG_BF60x /* * CAN */ @@ -223,8 +225,10 @@ bfin_debug_mmrs_dma(struct dentry *parent, unsigned long base, int num, char mdm __DMA(CURR_DESC_PTR, curr_desc_ptr); __DMA(CURR_ADDR, curr_addr); __DMA(IRQ_STATUS, irq_status); +#ifndef CONFIG_BF60x if (strcmp(pfx, "IMDMA") != 0) __DMA(PERIPHERAL_MAP, peripheral_map); +#endif __DMA(CURR_X_COUNT, curr_x_count); __DMA(CURR_Y_COUNT, curr_y_count); } @@ -568,7 +572,7 @@ bfin_debug_mmrs_uart(struct dentry *parent, unsigned long base, int num) #endif } #define UART(num) bfin_debug_mmrs_uart(parent, UART##num##_DLL, num) - +#endif /* CONFIG_BF60x */ /* * The actual debugfs generation */ @@ -740,7 +744,7 @@ static int __init bfin_debug_mmrs_init(void) D32(WPDACNT0); D32(WPDACNT1); D32(WPSTAT); - +#ifndef CONFIG_BF60x /* System MMRs */ #ifdef ATAPI_CONTROL parent = debugfs_create_dir("atapi", top); @@ -1873,7 +1877,7 @@ static int __init bfin_debug_mmrs_init(void) } #endif /* BF54x */ - +#endif /* CONFIG_BF60x */ debug_mmrs_dentry = top; return 0; diff --git a/arch/blackfin/kernel/dma-mapping.c b/arch/blackfin/kernel/dma-mapping.c index f0d1118f182..df437e52d9d 100644 --- a/arch/blackfin/kernel/dma-mapping.c +++ b/arch/blackfin/kernel/dma-mapping.c @@ -13,6 +13,7 @@ #include <linux/dma-mapping.h> #include <linux/scatterlist.h> #include <linux/export.h> +#include <linux/bitmap.h> static spinlock_t dma_page_lock; static unsigned long *dma_page; @@ -46,24 +47,17 @@ static inline unsigned int get_pages(size_t size) static unsigned long __alloc_dma_pages(unsigned int pages) { unsigned long ret = 0, flags; - int i, count = 0; + unsigned long start; if (dma_initialized == 0) dma_alloc_init(_ramend - DMA_UNCACHED_REGION, _ramend); spin_lock_irqsave(&dma_page_lock, flags); - for (i = 0; i < dma_pages;) { - if (test_bit(i++, dma_page) == 0) { - if (++count == pages) { - while (count--) - __set_bit(--i, dma_page); - - ret = dma_base + (i << PAGE_SHIFT); - break; - } - } else - count = 0; + start = bitmap_find_next_zero_area(dma_page, dma_pages, 0, pages, 0); + if (start < dma_pages) { + ret = dma_base + (start << PAGE_SHIFT); + bitmap_set(dma_page, start, pages); } spin_unlock_irqrestore(&dma_page_lock, flags); return ret; @@ -73,7 +67,6 @@ static void __free_dma_pages(unsigned long addr, unsigned int pages) { unsigned long page = (addr - dma_base) >> PAGE_SHIFT; unsigned long flags; - int i; if ((page + pages) > dma_pages) { printk(KERN_ERR "%s: freeing outside range.\n", __func__); @@ -81,9 +74,7 @@ static void __free_dma_pages(unsigned long addr, unsigned int pages) } spin_lock_irqsave(&dma_page_lock, flags); - for (i = page; i < page + pages; i++) - __clear_bit(i, dma_page); - + bitmap_clear(dma_page, page, pages); spin_unlock_irqrestore(&dma_page_lock, flags); } @@ -122,12 +113,13 @@ void __dma_sync(dma_addr_t addr, size_t size, EXPORT_SYMBOL(__dma_sync); int -dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, +dma_map_sg(struct device *dev, struct scatterlist *sg_list, int nents, enum dma_data_direction direction) { + struct scatterlist *sg; int i; - for (i = 0; i < nents; i++, sg++) { + for_each_sg(sg_list, sg, nents, i) { sg->dma_address = (dma_addr_t) sg_virt(sg); __dma_sync(sg_dma_address(sg), sg_dma_len(sg), direction); } @@ -136,12 +128,13 @@ dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, } EXPORT_SYMBOL(dma_map_sg); -void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, +void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg_list, int nelems, enum dma_data_direction direction) { + struct scatterlist *sg; int i; - for (i = 0; i < nelems; i++, sg++) { + for_each_sg(sg_list, sg, nelems, i) { sg->dma_address = (dma_addr_t) sg_virt(sg); __dma_sync(sg_dma_address(sg), sg_dma_len(sg), direction); } diff --git a/arch/blackfin/kernel/dumpstack.c b/arch/blackfin/kernel/dumpstack.c index 5cfbaa29821..95ba6d9e9a3 100644 --- a/arch/blackfin/kernel/dumpstack.c +++ b/arch/blackfin/kernel/dumpstack.c @@ -168,6 +168,7 @@ void dump_stack(void) #endif trace_buffer_save(tflags); dump_bfin_trace_buffer(); + dump_stack_print_info(KERN_DEFAULT); show_stack(current, &stack); trace_buffer_restore(tflags); } diff --git a/arch/blackfin/kernel/early_printk.c b/arch/blackfin/kernel/early_printk.c index 84ed8375113..61fbd2de993 100644 --- a/arch/blackfin/kernel/early_printk.c +++ b/arch/blackfin/kernel/early_printk.c @@ -25,8 +25,6 @@ extern struct console *bfin_earlyserial_init(unsigned int port, extern struct console *bfin_jc_early_init(void); #endif -static struct console *early_console; - /* Default console */ #define DEFAULT_PORT 0 #define DEFAULT_CFLAG CS8|B57600 diff --git a/arch/blackfin/kernel/entry.S b/arch/blackfin/kernel/entry.S index 686478f5f66..4071265fc4f 100644 --- a/arch/blackfin/kernel/entry.S +++ b/arch/blackfin/kernel/entry.S @@ -46,63 +46,14 @@ ENTRY(_ret_from_fork) SP += -12; pseudo_long_call _schedule_tail, p5; SP += 12; - r0 = [sp + PT_IPEND]; - cc = bittst(r0,1); - if cc jump .Lin_kernel; + p1 = [sp++]; + r0 = [sp++]; + cc = p1 == 0; + if cc jump .Lfork; + sp += -12; + call (p1); + sp += 12; +.Lfork: RESTORE_CONTEXT rti; -.Lin_kernel: - bitclr(r0,1); - [sp + PT_IPEND] = r0; - /* do a 'fake' RTI by jumping to [RETI] - * to avoid clearing supervisor mode in child - */ - r0 = [sp + PT_PC]; - [sp + PT_P0] = r0; - - RESTORE_ALL_SYS - jump (p0); ENDPROC(_ret_from_fork) - -ENTRY(_sys_fork) - r0 = -EINVAL; -#if (ANOMALY_05000371) - nop; - nop; - nop; -#endif - rts; -ENDPROC(_sys_fork) - -ENTRY(_sys_vfork) - r0 = sp; - r0 += 24; - [--sp] = rets; - SP += -12; - pseudo_long_call _bfin_vfork, p2; - SP += 12; - rets = [sp++]; - rts; -ENDPROC(_sys_vfork) - -ENTRY(_sys_clone) - r0 = sp; - r0 += 24; - [--sp] = rets; - SP += -12; - pseudo_long_call _bfin_clone, p2; - SP += 12; - rets = [sp++]; - rts; -ENDPROC(_sys_clone) - -ENTRY(_sys_rt_sigreturn) - r0 = sp; - r0 += 24; - [--sp] = rets; - SP += -12; - pseudo_long_call _do_rt_sigreturn, p2; - SP += 12; - rets = [sp++]; - rts; -ENDPROC(_sys_rt_sigreturn) diff --git a/arch/blackfin/kernel/ftrace.c b/arch/blackfin/kernel/ftrace.c index 9277905b82c..095de0fa044 100644 --- a/arch/blackfin/kernel/ftrace.c +++ b/arch/blackfin/kernel/ftrace.c @@ -65,11 +65,8 @@ int ftrace_update_ftrace_func(ftrace_func_t func) return ftrace_modify_code(ip, call, sizeof(call)); } -int __init ftrace_dyn_arch_init(void *data) +int __init ftrace_dyn_arch_init(void) { - /* return value is done indirectly via data */ - *(unsigned long *)data = 0; - return 0; } diff --git a/arch/blackfin/kernel/gptimers.c b/arch/blackfin/kernel/gptimers.c index 06459f4bf43..d776773d386 100644 --- a/arch/blackfin/kernel/gptimers.c +++ b/arch/blackfin/kernel/gptimers.c @@ -23,7 +23,11 @@ printk(KERN_DEBUG "%s:%s:%i: Assertion failed: " #expr "\n", __FILE__, __func__, __LINE__); #endif -#define BFIN_TIMER_NUM_GROUP (BFIN_TIMER_OCTET(MAX_BLACKFIN_GPTIMERS - 1) + 1) +#ifndef CONFIG_BF60x +# define BFIN_TIMER_NUM_GROUP (BFIN_TIMER_OCTET(MAX_BLACKFIN_GPTIMERS - 1) + 1) +#else +# define BFIN_TIMER_NUM_GROUP 1 +#endif static struct bfin_gptimer_regs * const timer_regs[MAX_BLACKFIN_GPTIMERS] = { @@ -158,6 +162,74 @@ uint32_t get_gptimer_count(unsigned int timer_id) } EXPORT_SYMBOL(get_gptimer_count); +#ifdef CONFIG_BF60x +void set_gptimer_delay(unsigned int timer_id, uint32_t delay) +{ + tassert(timer_id < MAX_BLACKFIN_GPTIMERS); + bfin_write(&timer_regs[timer_id]->delay, delay); + SSYNC(); +} +EXPORT_SYMBOL(set_gptimer_delay); + +uint32_t get_gptimer_delay(unsigned int timer_id) +{ + tassert(timer_id < MAX_BLACKFIN_GPTIMERS); + return bfin_read(&timer_regs[timer_id]->delay); +} +EXPORT_SYMBOL(get_gptimer_delay); +#endif + +#ifdef CONFIG_BF60x +int get_gptimer_intr(unsigned int timer_id) +{ + tassert(timer_id < MAX_BLACKFIN_GPTIMERS); + return !!(bfin_read(&group_regs[BFIN_TIMER_OCTET(timer_id)]->data_ilat) & timil_mask[timer_id]); +} +EXPORT_SYMBOL(get_gptimer_intr); + +void clear_gptimer_intr(unsigned int timer_id) +{ + tassert(timer_id < MAX_BLACKFIN_GPTIMERS); + bfin_write(&group_regs[BFIN_TIMER_OCTET(timer_id)]->data_ilat, timil_mask[timer_id]); +} +EXPORT_SYMBOL(clear_gptimer_intr); + +int get_gptimer_over(unsigned int timer_id) +{ + tassert(timer_id < MAX_BLACKFIN_GPTIMERS); + return !!(bfin_read(&group_regs[BFIN_TIMER_OCTET(timer_id)]->stat_ilat) & tovf_mask[timer_id]); +} +EXPORT_SYMBOL(get_gptimer_over); + +void clear_gptimer_over(unsigned int timer_id) +{ + tassert(timer_id < MAX_BLACKFIN_GPTIMERS); + bfin_write(&group_regs[BFIN_TIMER_OCTET(timer_id)]->stat_ilat, tovf_mask[timer_id]); +} +EXPORT_SYMBOL(clear_gptimer_over); + +int get_gptimer_run(unsigned int timer_id) +{ + tassert(timer_id < MAX_BLACKFIN_GPTIMERS); + return !!(bfin_read(&group_regs[BFIN_TIMER_OCTET(timer_id)]->run) & trun_mask[timer_id]); +} +EXPORT_SYMBOL(get_gptimer_run); + +uint32_t get_gptimer_status(unsigned int group) +{ + tassert(group < BFIN_TIMER_NUM_GROUP); + return bfin_read(&group_regs[group]->data_ilat); +} +EXPORT_SYMBOL(get_gptimer_status); + +void set_gptimer_status(unsigned int group, uint32_t value) +{ + tassert(group < BFIN_TIMER_NUM_GROUP); + bfin_write(&group_regs[group]->data_ilat, value); + SSYNC(); +} +EXPORT_SYMBOL(set_gptimer_status); +#else uint32_t get_gptimer_status(unsigned int group) { tassert(group < BFIN_TIMER_NUM_GROUP); @@ -212,6 +284,7 @@ int get_gptimer_run(unsigned int timer_id) return !!(read_gptimer_status(timer_id) & trun_mask[timer_id]); } EXPORT_SYMBOL(get_gptimer_run); +#endif void set_gptimer_config(unsigned int timer_id, uint16_t config) { @@ -231,6 +304,12 @@ EXPORT_SYMBOL(get_gptimer_config); void enable_gptimers(uint16_t mask) { int i; +#ifdef CONFIG_BF60x + uint16_t imask; + imask = bfin_read16(TIMER_DATA_IMSK); + imask &= ~mask; + bfin_write16(TIMER_DATA_IMSK, imask); +#endif tassert((mask & ~BLACKFIN_GPTIMER_IDMASK) == 0); for (i = 0; i < BFIN_TIMER_NUM_GROUP; ++i) { bfin_write(&group_regs[i]->enable, mask & 0xFF); @@ -253,12 +332,16 @@ static void _disable_gptimers(uint16_t mask) void disable_gptimers(uint16_t mask) { +#ifndef CONFIG_BF60x int i; _disable_gptimers(mask); for (i = 0; i < MAX_BLACKFIN_GPTIMERS; ++i) if (mask & (1 << i)) bfin_write(&group_regs[BFIN_TIMER_OCTET(i)]->status, trun_mask[i]); SSYNC(); +#else + _disable_gptimers(mask); +#endif } EXPORT_SYMBOL(disable_gptimers); diff --git a/arch/blackfin/kernel/init_task.c b/arch/blackfin/kernel/init_task.c deleted file mode 100644 index d3970e8acd1..00000000000 --- a/arch/blackfin/kernel/init_task.c +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Copyright 2004-2009 Analog Devices Inc. - * - * Licensed under the GPL-2 or later - */ - -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/init_task.h> -#include <linux/mqueue.h> -#include <linux/fs.h> - -static struct signal_struct init_signals = INIT_SIGNALS(init_signals); -static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); -/* - * Initial task structure. - * - * All other task structs will be allocated on slabs in fork.c - */ -struct task_struct init_task = INIT_TASK(init_task); -EXPORT_SYMBOL(init_task); - -/* - * Initial thread structure. - * - * We need to make sure that this is 8192-byte aligned due to the - * way process stacks are handled. This is done by having a special - * "init_task" linker map entry. - */ -union thread_union init_thread_union - __init_task_data = { -INIT_THREAD_INFO(init_task)}; diff --git a/arch/blackfin/kernel/ipipe.c b/arch/blackfin/kernel/ipipe.c index dbe11220cc5..f657b38163e 100644 --- a/arch/blackfin/kernel/ipipe.c +++ b/arch/blackfin/kernel/ipipe.c @@ -31,7 +31,6 @@ #include <linux/kthread.h> #include <linux/unistd.h> #include <linux/io.h> -#include <asm/system.h> #include <linux/atomic.h> #include <asm/irq_handler.h> diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c index ff3d747154a..0ba25764b8c 100644 --- a/arch/blackfin/kernel/irqchip.c +++ b/arch/blackfin/kernel/irqchip.c @@ -11,6 +11,7 @@ #include <linux/kallsyms.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/seq_file.h> #include <asm/irq_handler.h> #include <asm/trace.h> #include <asm/pda.h> @@ -33,37 +34,15 @@ static struct irq_desc bad_irq_desc = { #endif #ifdef CONFIG_PROC_FS -int show_interrupts(struct seq_file *p, void *v) +int arch_show_interrupts(struct seq_file *p, int prec) { - int i = *(loff_t *) v, j; - struct irqaction *action; - unsigned long flags; - - if (i < NR_IRQS) { - struct irq_desc *desc = irq_to_desc(i); - - raw_spin_lock_irqsave(&desc->lock, flags); - action = desc->action; - if (!action) - goto skip; - seq_printf(p, "%3d: ", i); - for_each_online_cpu(j) - seq_printf(p, "%10u ", kstat_irqs_cpu(i, j)); - seq_printf(p, " %8s", irq_desc_get_chip(desc)->name); - seq_printf(p, " %s", action->name); - for (action = action->next; action; action = action->next) - seq_printf(p, " %s", action->name); - - seq_putc(p, '\n'); - skip: - raw_spin_unlock_irqrestore(&desc->lock, flags); - } else if (i == NR_IRQS) { - seq_printf(p, "NMI: "); - for_each_online_cpu(j) - seq_printf(p, "%10u ", cpu_pda[j].__nmi_count); - seq_printf(p, " CORE Non Maskable Interrupt\n"); - seq_printf(p, "Err: %10u\n", atomic_read(&irq_err_count)); - } + int j; + + seq_printf(p, "%*s: ", prec, "NMI"); + for_each_online_cpu(j) + seq_printf(p, "%10u ", cpu_pda[j].__nmi_count); + seq_printf(p, " CORE Non Maskable Interrupt\n"); + seq_printf(p, "%*s: %10u\n", prec, "ERR", atomic_read(&irq_err_count)); return 0; } #endif diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c index 9b80b152435..fa53faeeb0e 100644 --- a/arch/blackfin/kernel/kgdb.c +++ b/arch/blackfin/kernel/kgdb.c @@ -9,6 +9,7 @@ #include <linux/ptrace.h> /* for linux pt_regs struct */ #include <linux/kgdb.h> #include <linux/uaccess.h> +#include <asm/irq_regs.h> void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) { @@ -329,6 +330,9 @@ static void bfin_disable_hw_debug(struct pt_regs *regs) } #ifdef CONFIG_SMP +extern void generic_exec_single(int cpu, struct call_single_data *data, int wait); +static struct call_single_data kgdb_smp_ipi_data[NR_CPUS]; + void kgdb_passive_cpu_callback(void *info) { kgdb_nmicallback(raw_smp_processor_id(), get_irq_regs()); @@ -336,12 +340,18 @@ void kgdb_passive_cpu_callback(void *info) void kgdb_roundup_cpus(unsigned long flags) { - smp_call_function(kgdb_passive_cpu_callback, NULL, 0); + unsigned int cpu; + + for (cpu = cpumask_first(cpu_online_mask); cpu < nr_cpu_ids; + cpu = cpumask_next(cpu, cpu_online_mask)) { + kgdb_smp_ipi_data[cpu].func = kgdb_passive_cpu_callback; + generic_exec_single(cpu, &kgdb_smp_ipi_data[cpu], 0); + } } void kgdb_roundup_cpu(int cpu, unsigned long flags) { - smp_call_function_single(cpu, kgdb_passive_cpu_callback, NULL, 0); + generic_exec_single(cpu, &kgdb_smp_ipi_data[cpu], 0); } #endif diff --git a/arch/blackfin/kernel/kgdb_test.c b/arch/blackfin/kernel/kgdb_test.c index 4a7dcfea98a..18ab004aea1 100644 --- a/arch/blackfin/kernel/kgdb_test.c +++ b/arch/blackfin/kernel/kgdb_test.c @@ -13,7 +13,6 @@ #include <asm/current.h> #include <asm/uaccess.h> -#include <asm/system.h> #include <asm/blackfin.h> diff --git a/arch/blackfin/kernel/perf_event.c b/arch/blackfin/kernel/perf_event.c index e47d19ae3e0..974e55496db 100644 --- a/arch/blackfin/kernel/perf_event.c +++ b/arch/blackfin/kernel/perf_event.c @@ -468,7 +468,7 @@ static void bfin_pmu_setup(int cpu) memset(cpuhw, 0, sizeof(struct cpu_hw_events)); } -static int __cpuinit +static int bfin_pmu_notifier(struct notifier_block *self, unsigned long action, void *hcpu) { unsigned int cpu = (long)hcpu; diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c index 8dd0416673c..4aa5545c4fd 100644 --- a/arch/blackfin/kernel/process.c +++ b/arch/blackfin/kernel/process.c @@ -19,6 +19,7 @@ #include <asm/blackfin.h> #include <asm/fixed_code.h> #include <asm/mem_map.h> +#include <asm/irq.h> asmlinkage void ret_from_fork(void); @@ -38,12 +39,6 @@ int nr_l1stack_tasks; void *l1_stack_base; unsigned long l1_stack_len; -/* - * Powermanagement idle function, if any.. - */ -void (*pm_idle)(void) = NULL; -EXPORT_SYMBOL(pm_idle); - void (*pm_power_off)(void) = NULL; EXPORT_SYMBOL(pm_power_off); @@ -51,15 +46,14 @@ EXPORT_SYMBOL(pm_power_off); * The idle loop on BFIN */ #ifdef CONFIG_IDLE_L1 -static void default_idle(void)__attribute__((l1_text)); -void cpu_idle(void)__attribute__((l1_text)); +void arch_cpu_idle(void)__attribute__((l1_text)); #endif /* * This is our default idle handler. We need to disable * interrupts here to ensure we don't miss a wakeup call. */ -static void default_idle(void) +void arch_cpu_idle(void) { #ifdef CONFIG_IPIPE ipipe_suspend_domain(); @@ -71,68 +65,12 @@ static void default_idle(void) hard_local_irq_enable(); } -/* - * The idle thread. We try to conserve power, while trying to keep - * overall latency low. The architecture specific idle is passed - * a value to indicate the level of "idleness" of the system. - */ -void cpu_idle(void) -{ - /* endless idle loop with no priority at all */ - while (1) { - void (*idle)(void) = pm_idle; - #ifdef CONFIG_HOTPLUG_CPU - if (cpu_is_offline(smp_processor_id())) - cpu_die(); -#endif - if (!idle) - idle = default_idle; - tick_nohz_idle_enter(); - rcu_idle_enter(); - while (!need_resched()) - idle(); - rcu_idle_exit(); - tick_nohz_idle_exit(); - preempt_enable_no_resched(); - schedule(); - preempt_disable(); - } -} - -/* - * This gets run with P1 containing the - * function to call, and R1 containing - * the "args". Note P0 is clobbered on the way here. - */ -void kernel_thread_helper(void); -__asm__(".section .text\n" - ".align 4\n" - "_kernel_thread_helper:\n\t" - "\tsp += -12;\n\t" - "\tr0 = r1;\n\t" "\tcall (p1);\n\t" "\tcall _do_exit;\n" ".previous"); - -/* - * Create a kernel thread. - */ -pid_t kernel_thread(int (*fn) (void *), void *arg, unsigned long flags) +void arch_cpu_idle_dead(void) { - struct pt_regs regs; - - memset(®s, 0, sizeof(regs)); - - regs.r1 = (unsigned long)arg; - regs.p1 = (unsigned long)fn; - regs.pc = (unsigned long)kernel_thread_helper; - regs.orig_p0 = -1; - /* Set bit 2 to tell ret_from_fork we should be returning to kernel - mode. */ - regs.ipend = 0x8002; - __asm__ __volatile__("%0 = syscfg;":"=da"(regs.syscfg):); - return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, - NULL); + cpu_die(); } -EXPORT_SYMBOL(kernel_thread); +#endif /* * Do necessary setup to start up a newly executed thread. @@ -160,70 +98,48 @@ void flush_thread(void) { } -asmlinkage int bfin_vfork(struct pt_regs *regs) -{ - return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, rdusp(), regs, 0, NULL, - NULL); -} - -asmlinkage int bfin_clone(struct pt_regs *regs) +asmlinkage int bfin_clone(unsigned long clone_flags, unsigned long newsp) { - unsigned long clone_flags; - unsigned long newsp; - #ifdef __ARCH_SYNC_CORE_DCACHE - if (current->rt.nr_cpus_allowed == num_possible_cpus()) + if (current->nr_cpus_allowed == num_possible_cpus()) set_cpus_allowed_ptr(current, cpumask_of(smp_processor_id())); #endif - - /* syscall2 puts clone_flags in r0 and usp in r1 */ - clone_flags = regs->r0; - newsp = regs->r1; - if (!newsp) - newsp = rdusp(); - else + if (newsp) newsp -= 12; - return do_fork(clone_flags, newsp, regs, 0, NULL, NULL); + return do_fork(clone_flags, newsp, 0, NULL, NULL); } int copy_thread(unsigned long clone_flags, unsigned long usp, unsigned long topstk, - struct task_struct *p, struct pt_regs *regs) + struct task_struct *p) { struct pt_regs *childregs; + unsigned long *v; childregs = (struct pt_regs *) (task_stack_page(p) + THREAD_SIZE) - 1; - *childregs = *regs; - childregs->r0 = 0; + v = ((unsigned long *)childregs) - 2; + if (unlikely(p->flags & PF_KTHREAD)) { + memset(childregs, 0, sizeof(struct pt_regs)); + v[0] = usp; + v[1] = topstk; + childregs->orig_p0 = -1; + childregs->ipend = 0x8000; + __asm__ __volatile__("%0 = syscfg;":"=da"(childregs->syscfg):); + p->thread.usp = 0; + } else { + *childregs = *current_pt_regs(); + childregs->r0 = 0; + p->thread.usp = usp ? : rdusp(); + v[0] = v[1] = 0; + } - p->thread.usp = usp; - p->thread.ksp = (unsigned long)childregs; + p->thread.ksp = (unsigned long)v; p->thread.pc = (unsigned long)ret_from_fork; return 0; } -/* - * sys_execve() executes a new program. - */ -asmlinkage int sys_execve(const char __user *name, - const char __user *const __user *argv, - const char __user *const __user *envp) -{ - int error; - char *filename; - struct pt_regs *regs = (struct pt_regs *)((&name) + 6); - - filename = getname(name); - error = PTR_ERR(filename); - if (IS_ERR(filename)) - return error; - error = do_execve(filename, argv, envp, regs); - putname(filename); - return error; -} - unsigned long get_wchan(struct task_struct *p) { unsigned long fp, pc; @@ -330,12 +246,16 @@ int in_mem_const(unsigned long addr, unsigned long size, { return in_mem_const_off(addr, size, 0, const_addr, const_size); } +#ifdef CONFIG_BF60x +#define ASYNC_ENABLED(bnum, bctlnum) 1 +#else #define ASYNC_ENABLED(bnum, bctlnum) \ ({ \ (bfin_read_EBIU_AMGCTL() & 0xe) < ((bnum + 1) << 1) ? 0 : \ bfin_read_EBIU_AMBCTL##bctlnum() & B##bnum##RDYEN ? 0 : \ 1; \ }) +#endif /* * We can't read EBIU banks that aren't enabled or we end up hanging * on the access to the async space. Make sure we validate accesses diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c index 75089f80855..8b8fe671b1a 100644 --- a/arch/blackfin/kernel/ptrace.c +++ b/arch/blackfin/kernel/ptrace.c @@ -20,7 +20,6 @@ #include <asm/page.h> #include <asm/pgtable.h> -#include <asm/system.h> #include <asm/processor.h> #include <asm/asm-offsets.h> #include <asm/dma.h> @@ -118,6 +117,7 @@ put_reg(struct task_struct *task, unsigned long regno, unsigned long data) int is_user_addr_valid(struct task_struct *child, unsigned long start, unsigned long len) { + bool valid; struct vm_area_struct *vma; struct sram_list_struct *sraml; @@ -125,9 +125,12 @@ is_user_addr_valid(struct task_struct *child, unsigned long start, unsigned long if (start + len < start) return -EIO; + down_read(&child->mm->mmap_sem); vma = find_vma(child->mm, start); - if (vma && start >= vma->vm_start && start + len <= vma->vm_end) - return 0; + valid = vma && start >= vma->vm_start && start + len <= vma->vm_end; + up_read(&child->mm->mmap_sem); + if (valid) + return 0; for (sraml = child->mm->context.sram_list; sraml; sraml = sraml->next) if (start >= (unsigned long)sraml->addr diff --git a/arch/blackfin/kernel/pwm.c b/arch/blackfin/kernel/pwm.c deleted file mode 100644 index 33f5942733b..00000000000 --- a/arch/blackfin/kernel/pwm.c +++ /dev/null @@ -1,100 +0,0 @@ -/* - * Blackfin Pulse Width Modulation (PWM) core - * - * Copyright (c) 2011 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#include <linux/module.h> -#include <linux/pwm.h> -#include <linux/slab.h> - -#include <asm/gptimers.h> -#include <asm/portmux.h> - -struct pwm_device { - unsigned id; - unsigned short pin; -}; - -static const unsigned short pwm_to_gptimer_per[] = { - P_TMR0, P_TMR1, P_TMR2, P_TMR3, P_TMR4, P_TMR5, - P_TMR6, P_TMR7, P_TMR8, P_TMR9, P_TMR10, P_TMR11, -}; - -struct pwm_device *pwm_request(int pwm_id, const char *label) -{ - struct pwm_device *pwm; - int ret; - - /* XXX: pwm_id really should be unsigned */ - if (pwm_id < 0) - return NULL; - - pwm = kzalloc(sizeof(*pwm), GFP_KERNEL); - if (!pwm) - return pwm; - - pwm->id = pwm_id; - if (pwm->id >= ARRAY_SIZE(pwm_to_gptimer_per)) - goto err; - - pwm->pin = pwm_to_gptimer_per[pwm->id]; - ret = peripheral_request(pwm->pin, label); - if (ret) - goto err; - - return pwm; - err: - kfree(pwm); - return NULL; -} -EXPORT_SYMBOL(pwm_request); - -void pwm_free(struct pwm_device *pwm) -{ - peripheral_free(pwm->pin); - kfree(pwm); -} -EXPORT_SYMBOL(pwm_free); - -int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) -{ - unsigned long period, duty; - unsigned long long val; - - if (duty_ns < 0 || duty_ns > period_ns) - return -EINVAL; - - val = (unsigned long long)get_sclk() * period_ns; - do_div(val, NSEC_PER_SEC); - period = val; - - val = (unsigned long long)period * duty_ns; - do_div(val, period_ns); - duty = period - val; - - if (duty >= period) - duty = period - 1; - - set_gptimer_config(pwm->id, TIMER_MODE_PWM | TIMER_PERIOD_CNT); - set_gptimer_pwidth(pwm->id, duty); - set_gptimer_period(pwm->id, period); - - return 0; -} -EXPORT_SYMBOL(pwm_config); - -int pwm_enable(struct pwm_device *pwm) -{ - enable_gptimer(pwm->id); - return 0; -} -EXPORT_SYMBOL(pwm_enable); - -void pwm_disable(struct pwm_device *pwm) -{ - disable_gptimer(pwm->id); -} -EXPORT_SYMBOL(pwm_disable); diff --git a/arch/blackfin/kernel/reboot.c b/arch/blackfin/kernel/reboot.c index c4c0081b199..c4f50a32850 100644 --- a/arch/blackfin/kernel/reboot.c +++ b/arch/blackfin/kernel/reboot.c @@ -9,7 +9,6 @@ #include <linux/interrupt.h> #include <asm/bfin-global.h> #include <asm/reboot.h> -#include <asm/system.h> #include <asm/bfrom.h> /* A system soft reset makes external memory unusable so force @@ -23,6 +22,7 @@ __attribute__ ((__l1_text__, __noreturn__)) static void bfin_reset(void) { +#ifndef CONFIG_BF60x if (!ANOMALY_05000353 && !ANOMALY_05000386) bfrom_SoftReset((void *)(L1_SCRATCH_START + L1_SCRATCH_LENGTH - 20)); @@ -58,7 +58,6 @@ static void bfin_reset(void) if (__SILICON_REVISION__ < 1 && bfin_revid() < 1) bfin_read_SWRST(); #endif - /* Wait for the SWRST write to complete. Cannot rely on SSYNC * though as the System state is all reset now. */ @@ -73,6 +72,10 @@ static void bfin_reset(void) while (1) /* Issue core reset */ asm("raise 1"); +#else + while (1) + bfin_write_RCU0_CTL(0x1); +#endif } __attribute__((weak)) @@ -83,7 +86,6 @@ void native_machine_restart(char *cmd) void machine_restart(char *cmd) { native_machine_restart(cmd); - local_irq_disable(); if (smp_processor_id()) smp_call_function((void *)bfin_reset, 0, 1); else diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index d6102c86d03..4f424ae3b36 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -17,7 +17,7 @@ #ifdef CONFIG_MTD_UCLINUX #include <linux/mtd/map.h> #include <linux/ext2_fs.h> -#include <linux/cramfs_fs.h> +#include <uapi/linux/cramfs_fs.h> #include <linux/romfs_fs.h> #endif @@ -25,11 +25,19 @@ #include <asm/cacheflush.h> #include <asm/blackfin.h> #include <asm/cplbinit.h> +#include <asm/clocks.h> #include <asm/div64.h> #include <asm/cpu.h> #include <asm/fixed_code.h> #include <asm/early_printk.h> #include <asm/irq_handler.h> +#include <asm/pda.h> +#ifdef CONFIG_BF60x +#include <mach/pm.h> +#endif +#ifdef CONFIG_SCB_PRIORITY +#include <asm/scb.h> +#endif u16 _bfin_swrst; EXPORT_SYMBOL(_bfin_swrst); @@ -47,7 +55,6 @@ EXPORT_SYMBOL(reserved_mem_dcache_on); #ifdef CONFIG_MTD_UCLINUX extern struct map_info uclinux_ram_map; unsigned long memory_mtd_end, memory_mtd_start, mtd_size; -unsigned long _ebss; EXPORT_SYMBOL(memory_mtd_end); EXPORT_SYMBOL(memory_mtd_start); EXPORT_SYMBOL(mtd_size); @@ -95,7 +102,7 @@ void __init generate_cplb_tables(void) } #endif -void __cpuinit bfin_setup_caches(unsigned int cpu) +void bfin_setup_caches(unsigned int cpu) { #ifdef CONFIG_BFIN_ICACHE bfin_icache_init(icplb_tbl[cpu]); @@ -161,7 +168,7 @@ void __cpuinit bfin_setup_caches(unsigned int cpu) #endif } -void __cpuinit bfin_setup_cpudata(unsigned int cpu) +void bfin_setup_cpudata(unsigned int cpu) { struct blackfin_cpudata *cpudata = &per_cpu(cpu_data, cpu); @@ -610,7 +617,8 @@ static __init void memory_setup(void) /* ROM_FS is XIP, so if we found it, we need to limit memory */ if (memory_end > max_mem) { - pr_info("Limiting kernel memory to %liMB due to anomaly 05000263\n", max_mem >> 20); + pr_info("Limiting kernel memory to %liMB due to anomaly 05000263\n", + (max_mem - CONFIG_PHY_RAM_BASE_ADDRESS) >> 20); memory_end = max_mem; } } @@ -640,7 +648,8 @@ static __init void memory_setup(void) * doesn't exist, or we don't need to - then dont. */ if (memory_end > max_mem) { - pr_info("Limiting kernel memory to %liMB due to anomaly 05000263\n", max_mem >> 20); + pr_info("Limiting kernel memory to %liMB due to anomaly 05000263\n", + (max_mem - CONFIG_PHY_RAM_BASE_ADDRESS) >> 20); memory_end = max_mem; } @@ -659,8 +668,8 @@ static __init void memory_setup(void) init_mm.end_data = (unsigned long)_edata; init_mm.brk = (unsigned long)0; - printk(KERN_INFO "Board Memory: %ldMB\n", physical_mem_end >> 20); - printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20); + printk(KERN_INFO "Board Memory: %ldMB\n", (physical_mem_end - CONFIG_PHY_RAM_BASE_ADDRESS) >> 20); + printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", (_ramend - CONFIG_PHY_RAM_BASE_ADDRESS) >> 20); printk(KERN_INFO "Memory map:\n" " fixedcode = 0x%p-0x%p\n" @@ -703,7 +712,7 @@ void __init find_min_max_pfn(void) int i; max_pfn = 0; - min_low_pfn = memory_end; + min_low_pfn = PFN_DOWN(memory_end); for (i = 0; i < bfin_memmap.nr_map; i++) { unsigned long start, end; @@ -746,8 +755,7 @@ static __init void setup_bootmem_allocator(void) /* pfn of the first usable page frame after kernel image*/ if (min_low_pfn < memory_start >> PAGE_SHIFT) min_low_pfn = memory_start >> PAGE_SHIFT; - - start_pfn = PAGE_OFFSET >> PAGE_SHIFT; + start_pfn = CONFIG_PHY_RAM_BASE_ADDRESS >> PAGE_SHIFT; end_pfn = memory_end >> PAGE_SHIFT; /* @@ -792,8 +800,8 @@ static __init void setup_bootmem_allocator(void) } /* reserve memory before memory_start, including bootmap */ - reserve_bootmem(PAGE_OFFSET, - memory_start + bootmap_size + PAGE_SIZE - 1 - PAGE_OFFSET, + reserve_bootmem(CONFIG_PHY_RAM_BASE_ADDRESS, + memory_start + bootmap_size + PAGE_SIZE - 1 - CONFIG_PHY_RAM_BASE_ADDRESS, BOOTMEM_DEFAULT); } @@ -842,13 +850,40 @@ static inline int __init get_mem_size(void) break; } switch (ddrctl & 0x30000) { - case DEVWD_4: ret *= 2; - case DEVWD_8: ret *= 2; - case DEVWD_16: break; + case DEVWD_4: + ret *= 2; + case DEVWD_8: + ret *= 2; + case DEVWD_16: + break; } if ((ddrctl & 0xc000) == 0x4000) ret *= 2; return ret; +#elif defined(CONFIG_BF60x) + u32 ddrctl = bfin_read_DMC0_CFG(); + int ret; + switch (ddrctl & 0xf00) { + case DEVSZ_64: + ret = 64 / 8; + break; + case DEVSZ_128: + ret = 128 / 8; + break; + case DEVSZ_256: + ret = 256 / 8; + break; + case DEVSZ_512: + ret = 512 / 8; + break; + case DEVSZ_1G: + ret = 1024 / 8; + break; + case DEVSZ_2G: + ret = 2048 / 8; + break; + } + return ret; #endif BUG(); } @@ -858,6 +893,22 @@ void __init native_machine_early_platform_add_devices(void) { } +#ifdef CONFIG_BF60x +static inline u_long bfin_get_clk(char *name) +{ + struct clk *clk; + u_long clk_rate; + + clk = clk_get(NULL, name); + if (IS_ERR(clk)) + return 0; + + clk_rate = clk_get_rate(clk); + clk_put(clk); + return clk_rate; +} +#endif + void __init setup_arch(char **cmdline_p) { u32 mmr; @@ -868,6 +919,7 @@ void __init setup_arch(char **cmdline_p) enable_shadow_console(); /* Check to make sure we are running on the right processor */ + mmr = bfin_cpuid(); if (unlikely(CPUID != bfin_cpuid())) printk(KERN_ERR "ERROR: Not running on ADSP-%s: unknown CPUID 0x%04x Rev 0.%d\n", CPU, bfin_cpuid(), bfin_revid()); @@ -888,6 +940,10 @@ void __init setup_arch(char **cmdline_p) memset(&bfin_memmap, 0, sizeof(bfin_memmap)); +#ifdef CONFIG_BF60x + /* Should init clock device before parse command early */ + clk_init(); +#endif /* If the user does not specify things on the command line, use * what the bootloader set things up as */ @@ -902,6 +958,7 @@ void __init setup_arch(char **cmdline_p) memory_setup(); +#ifndef CONFIG_BF60x /* Initialize Async memory banks */ bfin_write_EBIU_AMBCTL0(AMBCTL0VAL); bfin_write_EBIU_AMBCTL1(AMBCTL1VAL); @@ -911,6 +968,7 @@ void __init setup_arch(char **cmdline_p) bfin_write_EBIU_MODE(CONFIG_EBIU_MODEVAL); bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTLVAL); #endif +#endif #ifdef CONFIG_BFIN_HYSTERESIS_CONTROL bfin_write_PORTF_HYSTERESIS(HYST_PORTF_0_15); bfin_write_PORTG_HYSTERESIS(HYST_PORTG_0_15); @@ -936,7 +994,7 @@ void __init setup_arch(char **cmdline_p) printk(KERN_INFO "Hardware Trace %s and %sabled\n", (mmr & 0x1) ? "active" : "off", (mmr & 0x2) ? "en" : "dis"); - +#ifndef CONFIG_BF60x mmr = bfin_read_SYSCR(); printk(KERN_INFO "Boot Mode: %i\n", mmr & 0xF); @@ -978,7 +1036,7 @@ void __init setup_arch(char **cmdline_p) printk(KERN_INFO "Recovering from Watchdog event\n"); else if (_bfin_swrst & RESET_SOFTWARE) printk(KERN_NOTICE "Reset caused by Software reset\n"); - +#endif printk(KERN_INFO "Blackfin support (C) 2004-2010 Analog Devices, Inc.\n"); if (bfin_compiled_revid() == 0xffff) printk(KERN_INFO "Compiled for ADSP-%s Rev any, running on 0.%d\n", CPU, bfin_revid()); @@ -1006,8 +1064,13 @@ void __init setup_arch(char **cmdline_p) printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n"); +#ifdef CONFIG_BF60x + printk(KERN_INFO "Processor Speed: %lu MHz core clock, %lu MHz SCLk, %lu MHz SCLK0, %lu MHz SCLK1 and %lu MHz DCLK\n", + cclk / 1000000, bfin_get_clk("SYSCLK") / 1000000, get_sclk0() / 1000000, get_sclk1() / 1000000, get_dclk() / 1000000); +#else printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n", cclk / 1000000, sclk / 1000000); +#endif setup_bootmem_allocator(); @@ -1041,6 +1104,9 @@ void __init setup_arch(char **cmdline_p) #endif init_exception_vectors(); bfin_cache_init(); /* Initialize caches for the boot CPU */ +#ifdef CONFIG_SCB_PRIORITY + init_scb(); +#endif } static int __init topology_init(void) @@ -1058,10 +1124,12 @@ subsys_initcall(topology_init); /* Get the input clock frequency */ static u_long cached_clkin_hz = CONFIG_CLKIN_HZ; +#ifndef CONFIG_BF60x static u_long get_clkin_hz(void) { return cached_clkin_hz; } +#endif static int __init early_init_clkin_hz(char *buf) { cached_clkin_hz = simple_strtoul(buf, NULL, 0); @@ -1073,6 +1141,7 @@ static int __init early_init_clkin_hz(char *buf) } early_param("clkin_hz=", early_init_clkin_hz); +#ifndef CONFIG_BF60x /* Get the voltage input multiplier */ static u_long get_vco(void) { @@ -1095,10 +1164,14 @@ static u_long get_vco(void) cached_vco *= msel; return cached_vco; } +#endif /* Get the Core clock */ u_long get_cclk(void) { +#ifdef CONFIG_BF60x + return bfin_get_clk("CCLK"); +#else static u_long cached_cclk_pll_div, cached_cclk; u_long csel, ssel; @@ -1118,12 +1191,39 @@ u_long get_cclk(void) else cached_cclk = get_vco() >> csel; return cached_cclk; +#endif } EXPORT_SYMBOL(get_cclk); -/* Get the System clock */ +#ifdef CONFIG_BF60x +/* Get the bf60x clock of SCLK0 domain */ +u_long get_sclk0(void) +{ + return bfin_get_clk("SCLK0"); +} +EXPORT_SYMBOL(get_sclk0); + +/* Get the bf60x clock of SCLK1 domain */ +u_long get_sclk1(void) +{ + return bfin_get_clk("SCLK1"); +} +EXPORT_SYMBOL(get_sclk1); + +/* Get the bf60x DRAM clock */ +u_long get_dclk(void) +{ + return bfin_get_clk("DCLK"); +} +EXPORT_SYMBOL(get_dclk); +#endif + +/* Get the default system clock */ u_long get_sclk(void) { +#ifdef CONFIG_BF60x + return get_sclk0(); +#else static u_long cached_sclk; u_long ssel; @@ -1144,6 +1244,7 @@ u_long get_sclk(void) cached_sclk = get_vco() / ssel; return cached_sclk; +#endif } EXPORT_SYMBOL(get_sclk); @@ -1219,7 +1320,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "(Compiled for Rev %d)", bfin_compiled_revid()); } - seq_printf(m, "\ncpu MHz\t\t: %lu.%03lu/%lu.%03lu\n", + seq_printf(m, "\ncpu MHz\t\t: %lu.%06lu/%lu.%06lu\n", cclk/1000000, cclk%1000000, sclk/1000000, sclk%1000000); seq_printf(m, "bogomips\t: %lu.%02lu\n" diff --git a/arch/blackfin/kernel/shadow_console.c b/arch/blackfin/kernel/shadow_console.c index 557e9fef406..aeb8343eeb0 100644 --- a/arch/blackfin/kernel/shadow_console.c +++ b/arch/blackfin/kernel/shadow_console.c @@ -15,9 +15,9 @@ #include <asm/irq_handler.h> #include <asm/early_printk.h> -#define SHADOW_CONSOLE_START (0x500) -#define SHADOW_CONSOLE_END (0x1000) -#define SHADOW_CONSOLE_MAGIC_LOC (0x4F0) +#define SHADOW_CONSOLE_START (CONFIG_PHY_RAM_BASE_ADDRESS + 0x500) +#define SHADOW_CONSOLE_END (CONFIG_PHY_RAM_BASE_ADDRESS + 0x1000) +#define SHADOW_CONSOLE_MAGIC_LOC (CONFIG_PHY_RAM_BASE_ADDRESS + 0x4F0) #define SHADOW_CONSOLE_MAGIC (0xDEADBEEF) static __initdata char *shadow_console_buffer = (char *)SHADOW_CONSOLE_START; diff --git a/arch/blackfin/kernel/signal.c b/arch/blackfin/kernel/signal.c index d536f35d1f4..b022af6c48f 100644 --- a/arch/blackfin/kernel/signal.c +++ b/arch/blackfin/kernel/signal.c @@ -10,7 +10,6 @@ #include <linux/tty.h> #include <linux/personality.h> #include <linux/binfmts.h> -#include <linux/freezer.h> #include <linux/uaccess.h> #include <linux/tracehook.h> @@ -19,8 +18,6 @@ #include <asm/fixed_code.h> #include <asm/syscall.h> -#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) - /* Location of the trace bit in SYSCFG. */ #define TRACE_BITS 0x0001 @@ -40,11 +37,6 @@ struct rt_sigframe { struct ucontext uc; }; -asmlinkage int sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss) -{ - return do_sigaltstack(uss, uoss, rdusp()); -} - static inline int rt_restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *pr0) { @@ -85,9 +77,9 @@ rt_restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *p return err; } -asmlinkage int do_rt_sigreturn(unsigned long __unused) +asmlinkage int sys_rt_sigreturn(void) { - struct pt_regs *regs = (struct pt_regs *)__unused; + struct pt_regs *regs = current_pt_regs(); unsigned long usp = rdusp(); struct rt_sigframe *frame = (struct rt_sigframe *)(usp); sigset_t set; @@ -98,16 +90,12 @@ asmlinkage int do_rt_sigreturn(unsigned long __unused) if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) goto badframe; - sigdelsetmask(&set, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); - current->blocked = set; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + set_current_blocked(&set); if (rt_restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0)) goto badframe; - if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->usp) == -EFAULT) + if (restore_altstack(&frame->uc.uc_stack)) goto badframe; return r0; @@ -185,25 +173,27 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t * info, /* Create the ucontext. */ err |= __put_user(0, &frame->uc.uc_flags); err |= __put_user(0, &frame->uc.uc_link); - err |= - __put_user((void *)current->sas_ss_sp, &frame->uc.uc_stack.ss_sp); - err |= __put_user(sas_ss_flags(rdusp()), &frame->uc.uc_stack.ss_flags); - err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size); + err |= __save_altstack(&frame->uc.uc_stack, rdusp()); err |= rt_setup_sigcontext(&frame->uc.uc_mcontext, regs); err |= copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); if (err) - goto give_sigsegv; + return -EFAULT; /* Set up registers for signal handler */ - wrusp((unsigned long)frame); if (current->personality & FDPIC_FUNCPTRS) { struct fdpic_func_descriptor __user *funcptr = (struct fdpic_func_descriptor *) ka->sa.sa_handler; - __get_user(regs->pc, &funcptr->text); - __get_user(regs->p3, &funcptr->GOT); + u32 pc, p3; + err |= __get_user(pc, &funcptr->text); + err |= __get_user(p3, &funcptr->GOT); + if (err) + return -EFAULT; + regs->pc = pc; + regs->p3 = p3; } else regs->pc = (unsigned long)ka->sa.sa_handler; + wrusp((unsigned long)frame); regs->rets = SIGRETURN_STUB; regs->r0 = frame->sig; @@ -211,12 +201,6 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t * info, regs->r2 = (unsigned long)(&frame->uc); return 0; - - give_sigsegv: - if (sig == SIGSEGV) - ka->sa.sa_handler = SIG_DFL; - force_sig(SIGSEGV, current); - return -EFAULT; } static inline void @@ -252,30 +236,21 @@ handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler) /* * OK, we're invoking a handler */ -static int +static void handle_signal(int sig, siginfo_t *info, struct k_sigaction *ka, - sigset_t *oldset, struct pt_regs *regs) + struct pt_regs *regs) { - int ret; - /* are we from a system call? to see pt_regs->orig_p0 */ if (regs->orig_p0 >= 0) /* If so, check system call restarting.. */ handle_restart(regs, ka, 1); /* set up the stack frame */ - ret = setup_rt_frame(sig, ka, info, oldset, regs); - - if (ret == 0) { - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked, ¤t->blocked, - &ka->sa.sa_mask); - if (!(ka->sa.sa_flags & SA_NODEFER)) - sigaddset(¤t->blocked, sig); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - } - return ret; + if (setup_rt_frame(sig, ka, info, sigmask_to_save(), regs) < 0) + force_sigsegv(sig, current); + else + signal_delivered(sig, info, ka, regs, + test_thread_flag(TIF_SINGLESTEP)); } /* @@ -292,37 +267,16 @@ asmlinkage void do_signal(struct pt_regs *regs) siginfo_t info; int signr; struct k_sigaction ka; - sigset_t *oldset; current->thread.esp0 = (unsigned long)regs; - if (try_to_freeze()) - goto no_signal; - - if (test_thread_flag(TIF_RESTORE_SIGMASK)) - oldset = ¤t->saved_sigmask; - else - oldset = ¤t->blocked; - signr = get_signal_to_deliver(&info, &ka, regs, NULL); if (signr > 0) { /* Whee! Actually deliver the signal. */ - if (handle_signal(signr, &info, &ka, oldset, regs) == 0) { - /* a signal was successfully delivered; the saved - * sigmask will have been stored in the signal frame, - * and will be restored by sigreturn, so we can simply - * clear the TIF_RESTORE_SIGMASK flag */ - if (test_thread_flag(TIF_RESTORE_SIGMASK)) - clear_thread_flag(TIF_RESTORE_SIGMASK); - - tracehook_signal_handler(signr, &info, &ka, regs, - test_thread_flag(TIF_SINGLESTEP)); - } - + handle_signal(signr, &info, &ka, regs); return; } - no_signal: /* Did we come from a system call? */ if (regs->orig_p0 >= 0) /* Restart the system call - no handlers present */ @@ -330,10 +284,7 @@ asmlinkage void do_signal(struct pt_regs *regs) /* if there's no signal to deliver, we just put the saved sigmask * back */ - if (test_thread_flag(TIF_RESTORE_SIGMASK)) { - clear_thread_flag(TIF_RESTORE_SIGMASK); - sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); - } + restore_saved_sigmask(); } /* @@ -341,14 +292,12 @@ asmlinkage void do_signal(struct pt_regs *regs) */ asmlinkage void do_notify_resume(struct pt_regs *regs) { - if (test_thread_flag(TIF_SIGPENDING) || test_thread_flag(TIF_RESTORE_SIGMASK)) + if (test_thread_flag(TIF_SIGPENDING)) do_signal(regs); if (test_thread_flag(TIF_NOTIFY_RESUME)) { clear_thread_flag(TIF_NOTIFY_RESUME); tracehook_notify_resume(regs); - if (current->replacement_session_keyring) - key_replace_session_keyring(); } } diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c index d98f2d69b0c..cb0a4845339 100644 --- a/arch/blackfin/kernel/time-ts.c +++ b/arch/blackfin/kernel/time-ts.c @@ -66,8 +66,14 @@ void __init setup_gptimer0(void) { disable_gptimers(TIMER0bit); +#ifdef CONFIG_BF60x + bfin_write16(TIMER_DATA_IMSK, 0); + set_gptimer_config(TIMER0_id, TIMER_OUT_DIS + | TIMER_MODE_PWM_CONT | TIMER_PULSE_HI | TIMER_IRQ_PER); +#else set_gptimer_config(TIMER0_id, \ TIMER_OUT_DIS | TIMER_PERIOD_CNT | TIMER_MODE_PWM); +#endif set_gptimer_period(TIMER0_id, -1); set_gptimer_pwidth(TIMER0_id, -2); SSYNC(); @@ -135,9 +141,15 @@ static void bfin_gptmr0_set_mode(enum clock_event_mode mode, { switch (mode) { case CLOCK_EVT_MODE_PERIODIC: { +#ifndef CONFIG_BF60x set_gptimer_config(TIMER0_id, \ TIMER_OUT_DIS | TIMER_IRQ_ENA | \ TIMER_PERIOD_CNT | TIMER_MODE_PWM); +#else + set_gptimer_config(TIMER0_id, TIMER_OUT_DIS + | TIMER_MODE_PWM_CONT | TIMER_PULSE_HI | TIMER_IRQ_PER); +#endif + set_gptimer_period(TIMER0_id, get_sclk() / HZ); set_gptimer_pwidth(TIMER0_id, get_sclk() / HZ - 1); enable_gptimers(TIMER0bit); @@ -145,8 +157,14 @@ static void bfin_gptmr0_set_mode(enum clock_event_mode mode, } case CLOCK_EVT_MODE_ONESHOT: disable_gptimers(TIMER0bit); +#ifndef CONFIG_BF60x set_gptimer_config(TIMER0_id, \ TIMER_OUT_DIS | TIMER_IRQ_ENA | TIMER_MODE_PWM); +#else + set_gptimer_config(TIMER0_id, TIMER_OUT_DIS | TIMER_MODE_PWM + | TIMER_PULSE_HI | TIMER_IRQ_WID_DLY); +#endif + set_gptimer_period(TIMER0_id, 0); break; case CLOCK_EVT_MODE_UNUSED: @@ -160,7 +178,7 @@ static void bfin_gptmr0_set_mode(enum clock_event_mode mode, static void bfin_gptmr0_ack(void) { - set_gptimer_status(TIMER_GROUP1, TIMER_STATUS_TIMIL0); + clear_gptimer_intr(TIMER0_id); } static void __init bfin_gptmr0_init(void) @@ -197,7 +215,7 @@ static struct clock_event_device clockevent_gptmr0 = { .rating = 300, .irq = IRQ_TIMER0, .shift = 32, - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .set_next_event = bfin_gptmr0_set_next_event, .set_mode = bfin_gptmr0_set_mode, }; @@ -311,7 +329,6 @@ void bfin_coretmr_clockevent_init(void) evt->broadcast = smp_timer_broadcast; #endif - evt->name = "bfin_core_timer"; evt->rating = 350; evt->irq = -1; diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c index 2310b249675..3126b920a4a 100644 --- a/arch/blackfin/kernel/time.c +++ b/arch/blackfin/kernel/time.c @@ -85,7 +85,7 @@ time_sched_init(irqreturn_t(*timer_routine) (int, void *)) /* * Should return useconds since last timer tick */ -u32 arch_gettimeoffset(void) +static u32 blackfin_gettimeoffset(void) { unsigned long offset; unsigned long clocks_per_jiffy; @@ -141,6 +141,10 @@ void read_persistent_clock(struct timespec *ts) void __init time_init(void) { +#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET + arch_gettimeoffset = blackfin_gettimeoffset; +#endif + #ifdef CONFIG_RTC_DRV_BFIN /* [#2663] hack to filter junk RTC values that would cause * userspace to have to deal with time values greater than diff --git a/arch/blackfin/kernel/trace.c b/arch/blackfin/kernel/trace.c index 050db44fe91..c36efa0c716 100644 --- a/arch/blackfin/kernel/trace.c +++ b/arch/blackfin/kernel/trace.c @@ -10,6 +10,8 @@ #include <linux/hardirq.h> #include <linux/thread_info.h> #include <linux/mm.h> +#include <linux/oom.h> +#include <linux/sched.h> #include <linux/uaccess.h> #include <linux/module.h> #include <linux/kallsyms.h> @@ -21,13 +23,13 @@ #include <asm/fixed_code.h> #include <asm/traps.h> #include <asm/irq_handler.h> +#include <asm/pda.h> void decode_address(char *buf, unsigned long address) { struct task_struct *p; struct mm_struct *mm; - unsigned long flags, offset; - unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic(); + unsigned long offset; struct rb_node *n; #ifdef CONFIG_KALLSYMS @@ -111,17 +113,17 @@ void decode_address(char *buf, unsigned long address) * mappings of all our processes and see if we can't be a whee * bit more specific */ - write_lock_irqsave(&tasklist_lock, flags); + read_lock(&tasklist_lock); for_each_process(p) { - mm = (in_atomic ? p->mm : get_task_mm(p)); - if (!mm) - continue; + struct task_struct *t; - if (!down_read_trylock(&mm->mmap_sem)) { - if (!in_atomic) - mmput(mm); + t = find_lock_task_mm(p); + if (!t) continue; - } + + mm = t->mm; + if (!down_read_trylock(&mm->mmap_sem)) + goto __continue; for (n = rb_first(&mm->mm_rb); n; n = rb_next(n)) { struct vm_area_struct *vma; @@ -130,7 +132,7 @@ void decode_address(char *buf, unsigned long address) if (address >= vma->vm_start && address < vma->vm_end) { char _tmpbuf[256]; - char *name = p->comm; + char *name = t->comm; struct file *file = vma->vm_file; if (file) { @@ -163,8 +165,7 @@ void decode_address(char *buf, unsigned long address) name, vma->vm_start, vma->vm_end); up_read(&mm->mmap_sem); - if (!in_atomic) - mmput(mm); + task_unlock(t); if (buf[0] == '\0') sprintf(buf, "[ %s ] dynamic memory", name); @@ -174,8 +175,8 @@ void decode_address(char *buf, unsigned long address) } up_read(&mm->mmap_sem); - if (!in_atomic) - mmput(mm); +__continue: + task_unlock(t); } /* @@ -185,7 +186,7 @@ void decode_address(char *buf, unsigned long address) sprintf(buf, "/* kernel dynamic memory */"); done: - write_unlock_irqrestore(&tasklist_lock, flags); + read_unlock(&tasklist_lock); } #define EXPAND_LEN ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 256 - 1) @@ -852,6 +853,8 @@ void show_regs(struct pt_regs *fp) unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic(); pr_notice("\n"); + show_regs_print_info(KERN_NOTICE); + if (CPUID != bfin_cpuid()) pr_notice("Compiled for cpu family 0x%04x (Rev %d), " "but running on:0x%04x (Rev %d)\n", diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 655f25d139a..de5c2c3ebd9 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -17,6 +17,7 @@ #include <asm/trace.h> #include <asm/fixed_code.h> #include <asm/pseudo_instructions.h> +#include <asm/pda.h> #ifdef CONFIG_KGDB # include <linux/kgdb.h> diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S index ba35864b2b7..c9eec84aa25 100644 --- a/arch/blackfin/kernel/vmlinux.lds.S +++ b/arch/blackfin/kernel/vmlinux.lds.S @@ -145,7 +145,7 @@ SECTIONS .text_l1 L1_CODE_START : AT(LOADADDR(.exit.data) + SIZEOF(.exit.data)) #else - .init.data : AT(__data_lma + __data_len) + .init.data : AT(__data_lma + __data_len + 32) { __sinitdata = .; INIT_DATA diff --git a/arch/blackfin/lib/divsi3.S b/arch/blackfin/lib/divsi3.S index f89c5a49c47..ef2cd99efb8 100644 --- a/arch/blackfin/lib/divsi3.S +++ b/arch/blackfin/lib/divsi3.S @@ -1,7 +1,7 @@ /* * Copyright 2004-2009 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) * * 16 / 32 bit signed division. * Special cases : diff --git a/arch/blackfin/lib/ins.S b/arch/blackfin/lib/ins.S index 79caccea85c..d59608deccc 100644 --- a/arch/blackfin/lib/ins.S +++ b/arch/blackfin/lib/ins.S @@ -66,7 +66,7 @@ * - turns interrupts off every loop (low overhead, but longer latency) * - DMA version, which do not suffer from this issue. DMA versions have * different name (prefixed by dma_ ), and are located in - * ../kernel/bfin_dma_5xx.c + * ../kernel/bfin_dma.c * Using the dma related functions are recommended for transferring large * buffers in/out of FIFOs. */ diff --git a/arch/blackfin/lib/memchr.S b/arch/blackfin/lib/memchr.S index 542e40f8775..bcfc8a14c3f 100644 --- a/arch/blackfin/lib/memchr.S +++ b/arch/blackfin/lib/memchr.S @@ -1,7 +1,7 @@ /* * Copyright 2005-2009 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) */ #include <linux/linkage.h> diff --git a/arch/blackfin/lib/memcmp.S b/arch/blackfin/lib/memcmp.S index ce5b9f1a826..2e1c9477f2f 100644 --- a/arch/blackfin/lib/memcmp.S +++ b/arch/blackfin/lib/memcmp.S @@ -1,7 +1,7 @@ /* * Copyright 2004-2009 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) */ #include <linux/linkage.h> diff --git a/arch/blackfin/lib/memcpy.S b/arch/blackfin/lib/memcpy.S index c31bf22aab1..53cb3698ab3 100644 --- a/arch/blackfin/lib/memcpy.S +++ b/arch/blackfin/lib/memcpy.S @@ -7,7 +7,7 @@ * * Copyright 2004-2009 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) */ #include <linux/linkage.h> diff --git a/arch/blackfin/lib/memmove.S b/arch/blackfin/lib/memmove.S index 4eca566237a..e0b78208f1d 100644 --- a/arch/blackfin/lib/memmove.S +++ b/arch/blackfin/lib/memmove.S @@ -1,7 +1,7 @@ /* * Copyright 2005-2009 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) */ #include <linux/linkage.h> diff --git a/arch/blackfin/lib/memset.S b/arch/blackfin/lib/memset.S index eab1bef3f5b..cdcf9148ea2 100644 --- a/arch/blackfin/lib/memset.S +++ b/arch/blackfin/lib/memset.S @@ -1,7 +1,7 @@ /* * Copyright 2004-2009 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) */ #include <linux/linkage.h> diff --git a/arch/blackfin/lib/modsi3.S b/arch/blackfin/lib/modsi3.S index 8b0c7d4052a..f7026ce1fa0 100644 --- a/arch/blackfin/lib/modsi3.S +++ b/arch/blackfin/lib/modsi3.S @@ -6,7 +6,7 @@ * * Copyright 2004-2009 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) */ .global ___modsi3; diff --git a/arch/blackfin/lib/muldi3.S b/arch/blackfin/lib/muldi3.S index 953a38a1d1d..abf9b2a515b 100644 --- a/arch/blackfin/lib/muldi3.S +++ b/arch/blackfin/lib/muldi3.S @@ -1,7 +1,7 @@ /* * Copyright 2008 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) */ .align 2 diff --git a/arch/blackfin/lib/smulsi3_highpart.S b/arch/blackfin/lib/smulsi3_highpart.S index 99ee8c5de38..e50d6c4ac2a 100644 --- a/arch/blackfin/lib/smulsi3_highpart.S +++ b/arch/blackfin/lib/smulsi3_highpart.S @@ -1,7 +1,7 @@ /* * Copyright 2007 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) */ .align 2 diff --git a/arch/blackfin/lib/strcmp.S b/arch/blackfin/lib/strcmp.S index d7c1d158973..9c8b9863713 100644 --- a/arch/blackfin/lib/strcmp.S +++ b/arch/blackfin/lib/strcmp.S @@ -1,7 +1,7 @@ /* * Copyright 2005-2010 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) */ #include <linux/linkage.h> diff --git a/arch/blackfin/lib/strcpy.S b/arch/blackfin/lib/strcpy.S index a6a0c636380..9495aa77cc4 100644 --- a/arch/blackfin/lib/strcpy.S +++ b/arch/blackfin/lib/strcpy.S @@ -1,7 +1,7 @@ /* * Copyright 2005-2010 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) */ #include <linux/linkage.h> diff --git a/arch/blackfin/lib/strncmp.S b/arch/blackfin/lib/strncmp.S index 6da37c34a84..3bfaedce893 100644 --- a/arch/blackfin/lib/strncmp.S +++ b/arch/blackfin/lib/strncmp.S @@ -1,7 +1,7 @@ /* * Copyright 2005-2010 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) */ #include <linux/linkage.h> diff --git a/arch/blackfin/lib/strncpy.S b/arch/blackfin/lib/strncpy.S index 2c07dddac99..92fd1823bbe 100644 --- a/arch/blackfin/lib/strncpy.S +++ b/arch/blackfin/lib/strncpy.S @@ -1,7 +1,7 @@ /* * Copyright 2005-2010 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) */ #include <linux/linkage.h> diff --git a/arch/blackfin/lib/udivsi3.S b/arch/blackfin/lib/udivsi3.S index 97e904315ec..748a6a2e8c1 100644 --- a/arch/blackfin/lib/udivsi3.S +++ b/arch/blackfin/lib/udivsi3.S @@ -1,7 +1,7 @@ /* * Copyright 2004-2009 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) */ #include <linux/linkage.h> diff --git a/arch/blackfin/lib/umodsi3.S b/arch/blackfin/lib/umodsi3.S index 168eba7c64c..3794c00d859 100644 --- a/arch/blackfin/lib/umodsi3.S +++ b/arch/blackfin/lib/umodsi3.S @@ -3,7 +3,7 @@ * * Copyright 2004-2009 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) */ #ifdef CONFIG_ARITHMETIC_OPS_L1 diff --git a/arch/blackfin/lib/umulsi3_highpart.S b/arch/blackfin/lib/umulsi3_highpart.S index 051824a6ed0..0dcace96e4e 100644 --- a/arch/blackfin/lib/umulsi3_highpart.S +++ b/arch/blackfin/lib/umulsi3_highpart.S @@ -1,7 +1,7 @@ /* * Copyright 2007 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) */ .align 2 diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c index a2d96d31bbf..d022112927c 100644 --- a/arch/blackfin/mach-bf518/boards/ezbrd.c +++ b/arch/blackfin/mach-bf518/boards/ezbrd.c @@ -36,7 +36,7 @@ const char bfin_board_name[] = "ADI BF518F-EZBRD"; * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition ezbrd_partitions[] = { { .name = "bootloader(nor)", @@ -61,7 +61,7 @@ static struct physmap_flash_data ezbrd_flash_data = { static struct resource ezbrd_flash_resource = { .start = 0x20000000, -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) .end = 0x202fffff, #else .end = 0x203fffff, @@ -80,14 +80,14 @@ static struct platform_device ezbrd_flash_device = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = { P_MII0_ETxD0, @@ -105,7 +105,7 @@ static const unsigned short bfin_mac_peripherals[] = { static struct bfin_phydev_platform_data bfin_phydev_data[] = { { -#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) +#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M) .addr = 3, #else .addr = 1, @@ -119,7 +119,7 @@ static struct bfin_mii_bus_platform_data bfin_mii_bus_data = { .phydev_data = bfin_phydev_data, .phy_mode = PHY_INTERFACE_MODE_MII, .mac_peripherals = bfin_mac_peripherals, -#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) +#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M) .phy_mask = 0xfff7, /* Only probe the port phy connect to the on chip MAC */ #endif .vlan1_mask = 1, @@ -140,7 +140,7 @@ static struct platform_device bfin_mac_device = { } }; -#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) +#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M) static struct dsa_chip_data ksz8893m_switch_chip_data = { .mii_bus = &bfin_mii_bus.dev, .port_names = { @@ -165,8 +165,7 @@ static struct platform_device ksz8893m_switch_device = { #endif #endif -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -193,13 +192,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -216,8 +215,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -230,9 +228,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) -#if defined(CONFIG_NET_DSA_KSZ8893M) \ - || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) +#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M) { .modalias = "ksz8893m", .max_speed_hz = 5000000, @@ -244,7 +241,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ @@ -254,7 +251,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, @@ -264,7 +261,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 2, }, #endif -#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ +#if IS_ENABLED(CONFIG_SND_SOC_WM8731) \ && defined(CONFIG_SND_SOC_WM8731_SPI) { .modalias = "wm8731", @@ -274,7 +271,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_0, }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -282,7 +279,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 1, }, #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) { .modalias = "bfin-lq035q1-spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -294,7 +291,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }; /* SPI controller data */ -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI (0) */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 6, @@ -366,7 +363,7 @@ static struct platform_device bfin_spi1_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -465,7 +462,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -520,7 +517,7 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) static struct platform_device bfin_i2s = { .name = "bfin-i2s", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -528,7 +525,9 @@ static struct platform_device bfin_i2s = { }; #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) +static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; + static struct resource bfin_twi0_resource[] = { [0] = { .start = TWI0_REGBASE, @@ -547,29 +546,32 @@ static struct platform_device i2c_bfin_twi_device = { .id = 0, .num_resources = ARRAY_SIZE(bfin_twi0_resource), .resource = bfin_twi0_resource, + .dev = { + .platform_data = &bfin_twi0_pins, + }, }; #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, #endif -#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE) +#if IS_ENABLED(CONFIG_INPUT_PCF8574) { I2C_BOARD_INFO("pcf8574_keypad", 0x27), .irq = IRQ_PF8, }, #endif -#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_SSM2602) { I2C_BOARD_INFO("ssm2602", 0x1b), }, #endif }; -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -640,7 +642,7 @@ static struct platform_device bfin_sport1_uart_device = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -662,7 +664,7 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif -#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SDH_BFIN) static struct bfin_sd_host bfin_sdh_data = { .dma_chan = CH_RSI, @@ -705,24 +707,24 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, -#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) +#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M) &ksz8893m_switch_device, #endif #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, &bfin_spi1_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -731,7 +733,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -740,15 +742,15 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) &bfin_i2s, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -757,15 +759,15 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SDH_BFIN) &bf51x_sdh_device, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &ezbrd_flash_device, #endif }; @@ -779,7 +781,7 @@ static int __init ezbrd_init(void) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); /* setup BF518-EZBRD GPIO pin PG11 to AMS2, PG15 to AMS3. */ peripheral_request(P_AMS2, "ParaFlash"); -#if !defined(CONFIG_SPI_BFIN5XX) && !defined(CONFIG_SPI_BFIN5XX_MODULE) +#if !IS_ENABLED(CONFIG_SPI_BFIN5XX) peripheral_request(P_AMS3, "ParaFlash"); #endif return 0; @@ -821,7 +823,7 @@ void native_machine_restart(char *cmd) bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); } -void bfin_get_ether_addr(char *addr) +int bfin_get_ether_addr(char *addr) { /* the MAC is stored in OTP memory page 0xDF */ u32 ret; @@ -834,5 +836,6 @@ void bfin_get_ether_addr(char *addr) for (ret = 0; ret < 6; ++ret) addr[ret] = otp_mac_p[5 - ret]; } + return 0; } EXPORT_SYMBOL(bfin_get_ether_addr); diff --git a/arch/blackfin/mach-bf518/boards/tcm-bf518.c b/arch/blackfin/mach-bf518/boards/tcm-bf518.c index f271310f739..240d5cb1f02 100644 --- a/arch/blackfin/mach-bf518/boards/tcm-bf518.c +++ b/arch/blackfin/mach-bf518/boards/tcm-bf518.c @@ -36,7 +36,7 @@ const char bfin_board_name[] = "Bluetechnix TCM-BF518"; * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition tcm_partitions[] = { { .name = "bootloader(nor)", @@ -73,14 +73,14 @@ static struct platform_device tcm_flash_device = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_MII0; @@ -113,8 +113,7 @@ static struct platform_device bfin_mac_device = { }; #endif -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -141,13 +140,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -164,8 +163,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -178,7 +176,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -188,7 +186,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, @@ -198,7 +196,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 2, }, #endif -#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ +#if IS_ENABLED(CONFIG_SND_SOC_WM8731) \ && defined(CONFIG_SND_SOC_WM8731_SPI) { .modalias = "wm8731", @@ -208,7 +206,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_0, }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -216,7 +214,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 1, }, #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) { .modalias = "bfin-lq035q1-spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -228,7 +226,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }; /* SPI controller data */ -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI (0) */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 6, @@ -300,7 +298,7 @@ static struct platform_device bfin_spi1_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -399,7 +397,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -454,7 +452,9 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) +static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; + static struct resource bfin_twi0_resource[] = { [0] = { .start = TWI0_REGBASE, @@ -473,16 +473,19 @@ static struct platform_device i2c_bfin_twi_device = { .id = 0, .num_resources = ARRAY_SIZE(bfin_twi0_resource), .resource = bfin_twi0_resource, + .dev = { + .platform_data = &bfin_twi0_pins, + }, }; #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, #endif -#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE) +#if IS_ENABLED(CONFIG_INPUT_PCF8574) { I2C_BOARD_INFO("pcf8574_keypad", 0x27), .irq = IRQ_PF8, @@ -490,7 +493,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #endif }; -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -561,7 +564,7 @@ static struct platform_device bfin_sport1_uart_device = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -583,7 +586,7 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif -#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SDH_BFIN) static struct bfin_sd_host bfin_sdh_data = { .dma_chan = CH_RSI, @@ -626,21 +629,21 @@ static struct platform_device *tcm_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, &bfin_spi1_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -649,7 +652,7 @@ static struct platform_device *tcm_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -658,11 +661,11 @@ static struct platform_device *tcm_devices[] __initdata = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -671,15 +674,15 @@ static struct platform_device *tcm_devices[] __initdata = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SDH_BFIN) &bf51x_sdh_device, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &tcm_flash_device, #endif }; @@ -730,9 +733,8 @@ void native_machine_restart(char *cmd) bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); } -void bfin_get_ether_addr(char *addr) +int bfin_get_ether_addr(char *addr) { - random_ether_addr(addr); - printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__); + return 1; } EXPORT_SYMBOL(bfin_get_ether_addr); diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h index 56383f7cbc0..46cb88231d6 100644 --- a/arch/blackfin/mach-bf518/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h @@ -6,8 +6,7 @@ * DO NOT EDIT THIS FILE * * Copyright 2004-2011 Analog Devices Inc. - * Licensed under the ADI BSD license. - * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd + * Licensed under the Clear BSD license. */ /* This file should be up to date with: @@ -166,5 +165,6 @@ #define ANOMALY_05000474 (0) #define ANOMALY_05000475 (0) #define ANOMALY_05000480 (0) +#define ANOMALY_16000030 (0) #endif diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF512.h b/arch/blackfin/mach-bf518/include/mach/cdefBF512.h index bb79627f092..1c03ad4bcb7 100644 --- a/arch/blackfin/mach-bf518/include/mach/cdefBF512.h +++ b/arch/blackfin/mach-bf518/include/mach/cdefBF512.h @@ -1,7 +1,7 @@ /* * Copyright 2008-2010 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) */ #ifndef _CDEF_BF512_H diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF514.h b/arch/blackfin/mach-bf518/include/mach/cdefBF514.h index dc988668203..861221d1dcc 100644 --- a/arch/blackfin/mach-bf518/include/mach/cdefBF514.h +++ b/arch/blackfin/mach-bf518/include/mach/cdefBF514.h @@ -1,7 +1,7 @@ /* * Copyright 2008-2010 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) */ #ifndef _CDEF_BF514_H diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF516.h b/arch/blackfin/mach-bf518/include/mach/cdefBF516.h index 142e45cbc25..cc9bf0d378c 100644 --- a/arch/blackfin/mach-bf518/include/mach/cdefBF516.h +++ b/arch/blackfin/mach-bf518/include/mach/cdefBF516.h @@ -1,7 +1,7 @@ /* * Copyright 2008-2010 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) */ #ifndef _CDEF_BF516_H diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF518.h b/arch/blackfin/mach-bf518/include/mach/cdefBF518.h index e638197bf8b..96a82fd62ef 100644 --- a/arch/blackfin/mach-bf518/include/mach/cdefBF518.h +++ b/arch/blackfin/mach-bf518/include/mach/cdefBF518.h @@ -1,7 +1,7 @@ /* * Copyright 2008-2010 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) */ #ifndef _CDEF_BF518_H diff --git a/arch/blackfin/mach-bf518/include/mach/defBF512.h b/arch/blackfin/mach-bf518/include/mach/defBF512.h index 729704078cd..e6a017faad0 100644 --- a/arch/blackfin/mach-bf518/include/mach/defBF512.h +++ b/arch/blackfin/mach-bf518/include/mach/defBF512.h @@ -1,7 +1,7 @@ /* * Copyright 2008-2010 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) */ #ifndef _DEF_BF512_H @@ -1083,77 +1083,6 @@ #define ERR_NCOR 0x8000 /* Error Not Corrected Indicator */ -/* ******************** TWO-WIRE INTERFACE (TWI) MASKS ***********************/ -/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y); ) */ -#define CLKLOW(x) ((x) & 0xFF) /* Periods Clock Is Held Low */ -#define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */ - -/* TWI_PRESCALE Masks */ -#define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */ -#define TWI_ENA 0x0080 /* TWI Enable */ -#define SCCB 0x0200 /* SCCB Compatibility Enable */ - -/* TWI_SLAVE_CTL Masks */ -#define SEN 0x0001 /* Slave Enable */ -#define SADD_LEN 0x0002 /* Slave Address Length */ -#define STDVAL 0x0004 /* Slave Transmit Data Valid */ -#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */ -#define GEN 0x0010 /* General Call Adrress Matching Enabled */ - -/* TWI_SLAVE_STAT Masks */ -#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */ -#define GCALL 0x0002 /* General Call Indicator */ - -/* TWI_MASTER_CTL Masks */ -#define MEN 0x0001 /* Master Mode Enable */ -#define MADD_LEN 0x0002 /* Master Address Length */ -#define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */ -#define FAST 0x0008 /* Use Fast Mode Timing Specs */ -#define STOP 0x0010 /* Issue Stop Condition */ -#define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */ -#define DCNT 0x3FC0 /* Data Bytes To Transfer */ -#define SDAOVR 0x4000 /* Serial Data Override */ -#define SCLOVR 0x8000 /* Serial Clock Override */ - -/* TWI_MASTER_STAT Masks */ -#define MPROG 0x0001 /* Master Transfer In Progress */ -#define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */ -#define ANAK 0x0004 /* Address Not Acknowledged */ -#define DNAK 0x0008 /* Data Not Acknowledged */ -#define BUFRDERR 0x0010 /* Buffer Read Error */ -#define BUFWRERR 0x0020 /* Buffer Write Error */ -#define SDASEN 0x0040 /* Serial Data Sense */ -#define SCLSEN 0x0080 /* Serial Clock Sense */ -#define BUSBUSY 0x0100 /* Bus Busy Indicator */ - -/* TWI_INT_SRC and TWI_INT_ENABLE Masks */ -#define SINIT 0x0001 /* Slave Transfer Initiated */ -#define SCOMP 0x0002 /* Slave Transfer Complete */ -#define SERR 0x0004 /* Slave Transfer Error */ -#define SOVF 0x0008 /* Slave Overflow */ -#define MCOMP 0x0010 /* Master Transfer Complete */ -#define MERR 0x0020 /* Master Transfer Error */ -#define XMTSERV 0x0040 /* Transmit FIFO Service */ -#define RCVSERV 0x0080 /* Receive FIFO Service */ - -/* TWI_FIFO_CTRL Masks */ -#define XMTFLUSH 0x0001 /* Transmit Buffer Flush */ -#define RCVFLUSH 0x0002 /* Receive Buffer Flush */ -#define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */ -#define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */ - -/* TWI_FIFO_STAT Masks */ -#define XMTSTAT 0x0003 /* Transmit FIFO Status */ -#define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */ -#define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */ -#define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */ - -#define RCVSTAT 0x000C /* Receive FIFO Status */ -#define RCV_EMPTY 0x0000 /* Receive FIFO Empty */ -#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */ -#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */ - - /* ******************* PIN CONTROL REGISTER MASKS ************************/ /* PORT_MUX Masks */ #define PJSE 0x0001 /* Port J SPI/SPORT Enable */ diff --git a/arch/blackfin/mach-bf518/include/mach/defBF514.h b/arch/blackfin/mach-bf518/include/mach/defBF514.h index cfab428e577..97feaa629ed 100644 --- a/arch/blackfin/mach-bf518/include/mach/defBF514.h +++ b/arch/blackfin/mach-bf518/include/mach/defBF514.h @@ -1,7 +1,7 @@ /* * Copyright 2008-2009 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) */ #ifndef _DEF_BF514_H diff --git a/arch/blackfin/mach-bf518/include/mach/defBF516.h b/arch/blackfin/mach-bf518/include/mach/defBF516.h index 22a3aa0d262..7c79cb6a03b 100644 --- a/arch/blackfin/mach-bf518/include/mach/defBF516.h +++ b/arch/blackfin/mach-bf518/include/mach/defBF516.h @@ -1,7 +1,7 @@ /* * Copyright 2008-2009 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) */ #ifndef _DEF_BF516_H diff --git a/arch/blackfin/mach-bf518/include/mach/defBF518.h b/arch/blackfin/mach-bf518/include/mach/defBF518.h index cb18270e55c..12042ff1360 100644 --- a/arch/blackfin/mach-bf518/include/mach/defBF518.h +++ b/arch/blackfin/mach-bf518/include/mach/defBF518.h @@ -1,7 +1,7 @@ /* * Copyright 2008-2009 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) */ #ifndef _DEF_BF518_H diff --git a/arch/blackfin/mach-bf527/boards/ad7160eval.c b/arch/blackfin/mach-bf527/boards/ad7160eval.c index c8d5d2b7c73..9501bd8d9cd 100644 --- a/arch/blackfin/mach-bf527/boards/ad7160eval.c +++ b/arch/blackfin/mach-bf527/boards/ad7160eval.c @@ -37,7 +37,7 @@ const char bfin_board_name[] = "ADI BF527-AD7160EVAL"; * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) static struct resource musb_resources[] = { [0] = { .start = 0xffc03800, @@ -97,7 +97,7 @@ static struct platform_device musb_device = { }; #endif -#if defined(CONFIG_FB_BFIN_RA158Z) || defined(CONFIG_FB_BFIN_RA158Z_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_RA158Z) static struct resource bf52x_ra158z_resources[] = { { .start = IRQ_PPI_ERROR, @@ -114,7 +114,7 @@ static struct platform_device bf52x_ra158z_device = { }; #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition ad7160eval_partitions[] = { { .name = "bootloader(nor)", @@ -154,7 +154,7 @@ static struct platform_device ad7160eval_flash_device = { }; #endif -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) static struct mtd_partition partition_info[] = { { .name = "linux kernel(nand)", @@ -200,14 +200,14 @@ static struct platform_device bf5xx_nand_device = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_RMII0; @@ -241,8 +241,7 @@ static struct platform_device bfin_mac_device = { #endif -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -269,13 +268,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) static struct platform_device bfin_i2s = { .name = "bfin-i2s", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -283,17 +282,8 @@ static struct platform_device bfin_i2s = { }; #endif -#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) -static struct platform_device bfin_tdm = { - .name = "bfin-tdm", - .id = CONFIG_SND_BF5XX_SPORT_NUM, - /* TODO: add platform data here */ -}; -#endif - static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -305,8 +295,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ - || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -314,7 +303,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 4, }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 30000000, /* max spi clock (SCK) speed in HZ */ @@ -324,7 +313,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -334,7 +323,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI controller data */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, @@ -372,7 +361,7 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -483,7 +472,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -538,7 +527,7 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_TOUCHSCREEN_AD7160) || defined(CONFIG_TOUCHSCREEN_AD7160_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7160) #include <linux/input/ad7160.h> static const struct ad7160_platform_data bfin_ad7160_ts_info = { .sensor_x_res = 854, @@ -568,7 +557,9 @@ static const struct ad7160_platform_data bfin_ad7160_ts_info = { }; #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) +static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; + static struct resource bfin_twi0_resource[] = { [0] = { .start = TWI0_REGBASE, @@ -587,11 +578,14 @@ static struct platform_device i2c_bfin_twi_device = { .id = 0, .num_resources = ARRAY_SIZE(bfin_twi0_resource), .resource = bfin_twi0_resource, + .dev = { + .platform_data = &bfin_twi0_pins, + }, }; #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_TOUCHSCREEN_AD7160) || defined(CONFIG_TOUCHSCREEN_AD7160_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7160) { I2C_BOARD_INFO("ad7160", 0x33), .irq = IRQ_PH1, @@ -600,7 +594,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #endif }; -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -671,7 +665,7 @@ static struct platform_device bfin_sport1_uart_device = { #endif #endif -#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) +#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY) #include <asm/bfin_rotary.h> static struct bfin_rotary_platform_data bfin_rotary_data = { @@ -681,6 +675,7 @@ static struct bfin_rotary_platform_data bfin_rotary_data = { .rotary_button_key = KEY_ENTER, .debounce = 10, /* 0..17 */ .mode = ROT_QUAD_ENC | ROT_DEBE, + .pm_wakeup = 1, }; static struct resource bfin_rotary_resources[] = { @@ -727,28 +722,28 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) &bf5xx_nand_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) &musb_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -757,11 +752,11 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_FB_BFIN_RA158Z) || defined(CONFIG_FB_BFIN_RA158Z_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_RA158Z) &bf52x_ra158z_device, #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -770,11 +765,11 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -783,21 +778,17 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) +#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY) &bfin_rotary_device, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &ad7160eval_flash_device, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) &bfin_i2s, #endif - -#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) - &bfin_tdm, -#endif }; static int __init ad7160eval_init(void) @@ -846,7 +837,7 @@ void native_machine_restart(char *cmd) bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); } -void bfin_get_ether_addr(char *addr) +int bfin_get_ether_addr(char *addr) { /* the MAC is stored in OTP memory page 0xDF */ u32 ret; @@ -859,5 +850,6 @@ void bfin_get_ether_addr(char *addr) for (ret = 0; ret < 6; ++ret) addr[ret] = otp_mac_p[5 - ret]; } + return 0; } EXPORT_SYMBOL(bfin_get_ether_addr); diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c index 7330607856e..b1004b35db3 100644 --- a/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -37,7 +37,7 @@ const char bfin_board_name[] = "Bluetechnix CM-BF527"; * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) #include <linux/usb/isp1760.h> static struct resource bfin_isp1760_resources[] = { [0] = { @@ -72,7 +72,7 @@ static struct platform_device bfin_isp1760_device = { }; #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) static struct resource musb_resources[] = { [0] = { .start = 0xffc03800, @@ -134,7 +134,7 @@ static struct platform_device musb_device = { }; #endif -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) static struct mtd_partition partition_info[] = { { .name = "linux kernel(nand)", @@ -180,7 +180,7 @@ static struct platform_device bf5xx_nand_device = { }; #endif -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) static struct resource bfin_pcmcia_cf_resources[] = { { .start = 0x20310000, /* IO PORT */ @@ -209,14 +209,14 @@ static struct platform_device bfin_pcmcia_cf_device = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -249,7 +249,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +#if IS_ENABLED(CONFIG_DM9000) static struct resource dm9000_resources[] = { [0] = { .start = 0x203FB800, @@ -276,7 +276,7 @@ static struct platform_device dm9000_device = { }; #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_RMII0; @@ -309,7 +309,7 @@ static struct platform_device bfin_mac_device = { }; #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x20300000, @@ -330,8 +330,7 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -358,13 +357,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -381,8 +380,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -395,8 +393,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ - || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -404,7 +401,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 4, }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -414,7 +411,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, @@ -424,7 +421,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 2, }, #endif -#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ +#if IS_ENABLED(CONFIG_SND_SOC_WM8731) \ && defined(CONFIG_SND_SOC_WM8731_SPI) { .modalias = "wm8731", @@ -434,7 +431,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_0, }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -444,7 +441,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI controller data */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, @@ -482,7 +479,7 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) +#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR) static struct mtd_partition cm_partitions[] = { { .name = "bootloader(nor)", @@ -531,7 +528,7 @@ static struct platform_device cm_flash_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -642,7 +639,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -697,7 +694,9 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) +static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; + static struct resource bfin_twi0_resource[] = { [0] = { .start = TWI0_REGBASE, @@ -716,29 +715,32 @@ static struct platform_device i2c_bfin_twi_device = { .id = 0, .num_resources = ARRAY_SIZE(bfin_twi0_resource), .resource = bfin_twi0_resource, + .dev = { + .platform_data = &bfin_twi0_pins, + }, }; #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, #endif -#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE) +#if IS_ENABLED(CONFIG_INPUT_PCF8574) { I2C_BOARD_INFO("pcf8574_keypad", 0x27), .irq = IRQ_PF8, }, #endif -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_7393) { I2C_BOARD_INFO("bfin-adv7393", 0x2B), }, #endif }; -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -809,7 +811,7 @@ static struct platform_device bfin_sport1_uart_device = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -856,48 +858,48 @@ static struct platform_device *cmbf527_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) &bf5xx_nand_device, #endif -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) &bfin_pcmcia_cf_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) &bfin_isp1760_device, #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) &musb_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +#if IS_ENABLED(CONFIG_DM9000) &dm9000_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -906,7 +908,7 @@ static struct platform_device *cmbf527_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -915,11 +917,11 @@ static struct platform_device *cmbf527_devices[] __initdata = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -928,11 +930,11 @@ static struct platform_device *cmbf527_devices[] __initdata = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) +#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR) &cm_flash_device, #endif }; @@ -983,9 +985,8 @@ void native_machine_restart(char *cmd) bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); } -void bfin_get_ether_addr(char *addr) +int bfin_get_ether_addr(char *addr) { - random_ether_addr(addr); - printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__); + return 1; } EXPORT_SYMBOL(bfin_get_ether_addr); diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c index db3ecfce830..a3a57235276 100644 --- a/arch/blackfin/mach-bf527/boards/ezbrd.c +++ b/arch/blackfin/mach-bf527/boards/ezbrd.c @@ -36,7 +36,7 @@ const char bfin_board_name[] = "ADI BF526-EZBRD"; * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) static struct resource musb_resources[] = { [0] = { .start = 0xffc03800, @@ -98,7 +98,7 @@ static struct platform_device musb_device = { }; #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition ezbrd_partitions[] = { { .name = "bootloader(nor)", @@ -138,7 +138,7 @@ static struct platform_device ezbrd_flash_device = { }; #endif -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) static struct mtd_partition partition_info[] = { { .name = "bootloader(nand)", @@ -188,7 +188,7 @@ static struct platform_device bf5xx_nand_device = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, @@ -196,7 +196,7 @@ static struct platform_device rtc_device = { #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_RMII0; @@ -229,8 +229,7 @@ static struct platform_device bfin_mac_device = { }; #endif -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -257,13 +256,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -279,7 +278,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879) #include <linux/spi/ad7879.h> static const struct ad7879_platform_data bfin_ad7879_ts_info = { .model = 7879, /* Model = AD7879 */ @@ -297,8 +296,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -311,7 +309,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ @@ -321,7 +319,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, @@ -331,7 +329,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 2, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI) { .modalias = "ad7879", .platform_data = &bfin_ad7879_ts_info, @@ -342,7 +340,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_CPHA | SPI_CPOL, }, #endif -#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ +#if IS_ENABLED(CONFIG_SND_SOC_WM8731) \ && defined(CONFIG_SND_SOC_WM8731_SPI) { .modalias = "wm8731", @@ -352,7 +350,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_0, }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -360,7 +358,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 1, }, #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) { .modalias = "bfin-lq035q1-spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -371,7 +369,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI controller data */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, @@ -409,7 +407,7 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -520,7 +518,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -575,7 +573,9 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) +static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; + static struct resource bfin_twi0_resource[] = { [0] = { .start = TWI0_REGBASE, @@ -594,16 +594,19 @@ static struct platform_device i2c_bfin_twi_device = { .id = 0, .num_resources = ARRAY_SIZE(bfin_twi0_resource), .resource = bfin_twi0_resource, + .dev = { + .platform_data = &bfin_twi0_pins, + }, }; #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, #endif -#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE) +#if IS_ENABLED(CONFIG_INPUT_PCF8574) { I2C_BOARD_INFO("pcf8574_keypad", 0x27), .irq = IRQ_PF8, @@ -611,7 +614,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #endif }; -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -682,7 +685,7 @@ static struct platform_device bfin_sport1_uart_device = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -726,7 +729,7 @@ static struct platform_device bfin_dpmc = { }, }; -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) #include <asm/bfin-lq035q1.h> static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = { @@ -759,28 +762,28 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) &bf5xx_nand_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) &musb_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -789,11 +792,11 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) &bfin_lq035q1_device, #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -802,11 +805,11 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -815,11 +818,11 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &ezbrd_flash_device, #endif }; @@ -870,7 +873,7 @@ void native_machine_restart(char *cmd) bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); } -void bfin_get_ether_addr(char *addr) +int bfin_get_ether_addr(char *addr) { /* the MAC is stored in OTP memory page 0xDF */ u32 ret; @@ -883,5 +886,6 @@ void bfin_get_ether_addr(char *addr) for (ret = 0; ret < 6; ++ret) addr[ret] = otp_mac_p[5 - ret]; } + return 0; } EXPORT_SYMBOL(bfin_get_ether_addr); diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index dfdd8e6bac7..d64f565dc2a 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -42,7 +42,7 @@ const char bfin_board_name[] = "ADI BF527-EZKIT"; * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) #include <linux/usb/isp1760.h> static struct resource bfin_isp1760_resources[] = { [0] = { @@ -77,7 +77,7 @@ static struct platform_device bfin_isp1760_device = { }; #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) static struct resource musb_resources[] = { [0] = { .start = 0xffc03800, @@ -114,9 +114,9 @@ static struct musb_hdrc_config musb_config = { }; static struct musb_hdrc_platform_data musb_plat = { -#if defined(CONFIG_USB_MUSB_OTG) +#if defined(CONFIG_USB_MUSB_HDRC) && defined(CONFIG_USB_GADGET_MUSB_HDRC) .mode = MUSB_OTG, -#elif defined(CONFIG_USB_MUSB_HDRC_HCD) +#elif defined(CONFIG_USB_MUSB_HDRC) .mode = MUSB_HOST, #elif defined(CONFIG_USB_GADGET_MUSB_HDRC) .mode = MUSB_PERIPHERAL, @@ -139,7 +139,7 @@ static struct platform_device musb_device = { }; #endif -#if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_T350MCQB) static struct resource bf52x_t350mcqb_resources[] = { { @@ -157,7 +157,7 @@ static struct platform_device bf52x_t350mcqb_device = { }; #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) #include <asm/bfin-lq035q1.h> static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = { @@ -184,7 +184,7 @@ static struct platform_device bfin_lq035q1_device = { }; #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition ezkit_partitions[] = { { .name = "bootloader(nor)", @@ -224,7 +224,7 @@ static struct platform_device ezkit_flash_device = { }; #endif -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) static struct mtd_partition partition_info[] = { { .name = "bootloader(nand)", @@ -274,7 +274,7 @@ static struct platform_device bf5xx_nand_device = { }; #endif -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) static struct resource bfin_pcmcia_cf_resources[] = { { .start = 0x20310000, /* IO PORT */ @@ -303,14 +303,14 @@ static struct platform_device bfin_pcmcia_cf_device = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -343,7 +343,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +#if IS_ENABLED(CONFIG_DM9000) static struct resource dm9000_resources[] = { [0] = { .start = 0x203FB800, @@ -370,7 +370,7 @@ static struct platform_device dm9000_device = { }; #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_RMII0; @@ -403,7 +403,7 @@ static struct platform_device bfin_mac_device = { }; #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x20300000, @@ -427,8 +427,7 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -455,13 +454,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -477,7 +476,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879) #include <linux/spi/ad7879.h> static const struct ad7879_platform_data bfin_ad7879_ts_info = { .model = 7879, /* Model = AD7879 */ @@ -493,8 +492,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = { }; #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \ - defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) static const u16 bfin_snd_pin[][7] = { {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, @@ -542,28 +540,21 @@ static struct resource bfin_snd_resources[][4] = { }; #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) static struct platform_device bfin_i2s_pcm = { .name = "bfin-i2s-pcm-audio", .id = -1, }; #endif -#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) -static struct platform_device bfin_tdm_pcm = { - .name = "bfin-tdm-pcm-audio", - .id = -1, -}; -#endif - -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) static struct platform_device bfin_ac97_pcm = { .name = "bfin-ac97-pcm-audio", .id = -1, }; #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) static struct platform_device bfin_i2s = { .name = "bfin-i2s", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -575,21 +566,22 @@ static struct platform_device bfin_i2s = { }; #endif -#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) -static struct platform_device bfin_tdm = { - .name = "bfin-tdm", - .id = CONFIG_SND_BF5XX_SPORT_NUM, - .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]), - .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM], +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) +static const char * const ad1836_link[] = { + "bfin-i2s.0", + "spi0.4", +}; +static struct platform_device bfin_ad1836_machine = { + .name = "bfin-snd-ad1836", + .id = -1, .dev = { - .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM], + .platform_data = (void *)ad1836_link, }, }; #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -602,8 +594,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ - || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -613,7 +604,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -624,7 +615,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, @@ -634,7 +625,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 2, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI) { .modalias = "ad7879", .platform_data = &bfin_ad7879_ts_info, @@ -645,7 +636,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_CPHA | SPI_CPOL, }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -653,7 +644,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 1, }, #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) { .modalias = "bfin-lq035q1-spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -664,7 +655,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI controller data */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, @@ -702,7 +693,7 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -813,7 +804,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -868,7 +859,9 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) +static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; + static struct resource bfin_twi0_resource[] = { [0] = { .start = TWI0_REGBASE, @@ -887,10 +880,13 @@ static struct platform_device i2c_bfin_twi_device = { .id = 0, .num_resources = ARRAY_SIZE(bfin_twi0_resource), .resource = bfin_twi0_resource, + .dev = { + .platform_data = &bfin_twi0_pins, + }, }; #endif -#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE) +#if IS_ENABLED(CONFIG_PMIC_ADP5520) #include <linux/mfd/adp5520.h> /* @@ -956,54 +952,54 @@ static struct adp5520_platform_data adp5520_pdev_data = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, #endif -#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE) +#if IS_ENABLED(CONFIG_INPUT_PCF8574) { I2C_BOARD_INFO("pcf8574_keypad", 0x27), .irq = IRQ_PF8, }, #endif -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_7393) { I2C_BOARD_INFO("bfin-adv7393", 0x2B), }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_I2C) { I2C_BOARD_INFO("ad7879", 0x2C), .irq = IRQ_PF8, .platform_data = (void *)&bfin_ad7879_ts_info, }, #endif -#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE) +#if IS_ENABLED(CONFIG_PMIC_ADP5520) { I2C_BOARD_INFO("pmic-adp5520", 0x32), .irq = IRQ_PF9, .platform_data = (void *)&adp5520_pdev_data, }, #endif -#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_SSM2602) { I2C_BOARD_INFO("ssm2602", 0x1b), }, #endif -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("ad5252", 0x2f), }, #endif -#if defined(CONFIG_SND_SOC_ADAU1373) || defined(CONFIG_SND_SOC_ADAU1373_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_ADAU1373) { I2C_BOARD_INFO("adau1373", 0x1A), }, #endif }; -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -1074,7 +1070,7 @@ static struct platform_device bfin_sport1_uart_device = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/gpio_keys.h> static struct gpio_keys_button bfin_gpio_keys_table[] = { @@ -1095,7 +1091,7 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif -#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) +#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY) #include <asm/bfin_rotary.h> static struct bfin_rotary_platform_data bfin_rotary_data = { @@ -1105,6 +1101,7 @@ static struct bfin_rotary_platform_data bfin_rotary_data = { .rotary_button_key = KEY_ENTER, .debounce = 10, /* 0..17 */ .mode = ROT_QUAD_ENC | ROT_DEBE, + .pm_wakeup = 1, }; static struct resource bfin_rotary_resources[] = { @@ -1152,56 +1149,56 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) &bf5xx_nand_device, #endif -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) &bfin_pcmcia_cf_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) &bfin_isp1760_device, #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) &musb_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +#if IS_ENABLED(CONFIG_DM9000) &dm9000_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_T350MCQB) &bf52x_t350mcqb_device, #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) &bfin_lq035q1_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -1210,7 +1207,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -1219,11 +1216,11 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -1232,36 +1229,32 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) +#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY) &bfin_rotary_device, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &ezkit_flash_device, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) &bfin_i2s_pcm, #endif -#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) - &bfin_tdm_pcm, -#endif - -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) &bfin_ac97_pcm, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) &bfin_i2s, #endif -#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) - &bfin_tdm, +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) + &bfin_ad1836_machine, #endif }; @@ -1311,7 +1304,7 @@ void native_machine_restart(char *cmd) bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); } -void bfin_get_ether_addr(char *addr) +int bfin_get_ether_addr(char *addr) { /* the MAC is stored in OTP memory page 0xDF */ u32 ret; @@ -1324,5 +1317,6 @@ void bfin_get_ether_addr(char *addr) for (ret = 0; ret < 6; ++ret) addr[ret] = otp_mac_p[5 - ret]; } + return 0; } EXPORT_SYMBOL(bfin_get_ether_addr); diff --git a/arch/blackfin/mach-bf527/boards/tll6527m.c b/arch/blackfin/mach-bf527/boards/tll6527m.c index 360e97fc529..a0f5856a5ff 100644 --- a/arch/blackfin/mach-bf527/boards/tll6527m.c +++ b/arch/blackfin/mach-bf527/boards/tll6527m.c @@ -28,8 +28,7 @@ #include <asm/portmux.h> #include <asm/dpmc.h> -#if defined(CONFIG_TOUCHSCREEN_AD7879) \ - || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879) #include <linux/spi/ad7879.h> #define LCD_BACKLIGHT_GPIO 0x40 /* TLL6527M uses TLL7UIQ35 / ADI LCD EZ Extender. AD7879 AUX GPIO is used for @@ -45,7 +44,7 @@ const char bfin_board_name[] = "TLL6527M"; * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) static struct resource musb_resources[] = { [0] = { .start = 0xffc03800, @@ -104,7 +103,7 @@ static struct platform_device musb_device = { }; #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) #include <asm/bfin-lq035q1.h> static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = { @@ -133,7 +132,7 @@ static struct platform_device bfin_lq035q1_device = { }; #endif -#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) +#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR) static struct mtd_partition tll6527m_partitions[] = { { .name = "bootloader(nor)", @@ -182,7 +181,7 @@ static struct platform_device tll6527m_flash_device = { }; #endif -#if defined(CONFIG_GPIO_DECODER) || defined(CONFIG_GPIO_DECODER_MODULE) +#if IS_ENABLED(CONFIG_GPIO_DECODER) /* An SN74LVC138A 3:8 decoder chip has been used to generate 7 augmented * outputs used as SPI CS lines for all SPI SLAVE devices on TLL6527v1-0. * EXP_GPIO_SPISEL_BASE is the base number for the expanded outputs being @@ -215,7 +214,7 @@ static struct platform_device spi_decoded_gpio = { #endif -#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE) +#if IS_ENABLED(CONFIG_INPUT_ADXL34X) #include <linux/input/adxl34x.h> static const struct adxl34x_platform_data adxl345_info = { .x_axis_offset = 0, @@ -250,14 +249,14 @@ static const struct adxl34x_platform_data adxl345_info = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_RMII0; @@ -290,8 +289,7 @@ static struct platform_device bfin_mac_device = { }; #endif -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -318,14 +316,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879) \ - || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879) static const struct ad7879_platform_data bfin_ad7879_ts_info = { .model = 7879, /* Model = AD7879 */ .x_plate_ohms = 620, /* 620 Ohm from the touch datasheet */ @@ -343,7 +340,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = { }; #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) static struct platform_device bfin_i2s = { .name = "bfin-i2s", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -351,7 +348,7 @@ static struct platform_device bfin_i2s = { }; #endif -#if defined(CONFIG_GPIO_MCP23S08) || defined(CONFIG_GPIO_MCP23S08_MODULE) +#if IS_ENABLED(CONFIG_GPIO_MCP23S08) #include <linux/spi/mcp23s08.h> static const struct mcp23s08_platform_data bfin_mcp23s08_sys_gpio_info = { .chip[0].is_present = true, @@ -364,8 +361,7 @@ static const struct mcp23s08_platform_data bfin_mcp23s08_usr_gpio_info = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -381,7 +377,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", /* @@ -396,8 +392,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_0, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) \ - || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI) { .modalias = "ad7879", .platform_data = &bfin_ad7879_ts_info, @@ -409,7 +404,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_CPHA | SPI_CPOL, }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 10000000, @@ -419,7 +414,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_CPHA | SPI_CPOL, }, #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) { .modalias = "bfin-lq035q1-spi", .max_speed_hz = 20000000, @@ -428,7 +423,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_CPHA | SPI_CPOL, }, #endif -#if defined(CONFIG_GPIO_MCP23S08) || defined(CONFIG_GPIO_MCP23S08_MODULE) +#if IS_ENABLED(CONFIG_GPIO_MCP23S08) { .modalias = "mcp23s08", .platform_data = &bfin_mcp23s08_sys_gpio_info, @@ -448,7 +443,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI controller data */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = EXP_GPIO_SPISEL_BASE + 8 + MAX_CTRL_CS, @@ -487,7 +482,7 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -600,7 +595,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -655,7 +650,9 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) +static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; + static struct resource bfin_twi0_resource[] = { [0] = { .start = TWI0_REGBASE, @@ -674,30 +671,32 @@ static struct platform_device i2c_bfin_twi_device = { .id = 0, .num_resources = ARRAY_SIZE(bfin_twi0_resource), .resource = bfin_twi0_resource, + .dev = { + .platform_data = &bfin_twi0_pins, + }, }; #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, #endif -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_7393) { I2C_BOARD_INFO("bfin-adv7393", 0x2B), }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) \ - || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_I2C) { I2C_BOARD_INFO("ad7879", 0x2C), .irq = IRQ_PH14, .platform_data = (void *)&bfin_ad7879_ts_info, }, #endif -#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_SSM2602) { I2C_BOARD_INFO("ssm2602", 0x1b), }, @@ -709,8 +708,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { { I2C_BOARD_INFO("ltc3576", 0x09), }, -#if defined(CONFIG_INPUT_ADXL34X_I2C) \ - || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE) +#if IS_ENABLED(CONFIG_INPUT_ADXL34X_I2C) { I2C_BOARD_INFO("adxl34x", 0x53), .irq = IRQ_PH13, @@ -719,8 +717,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #endif }; -#if defined(CONFIG_SERIAL_BFIN_SPORT) \ - || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -818,28 +815,28 @@ static struct platform_device *tll6527m_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) &musb_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) &bfin_lq035q1_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -848,7 +845,7 @@ static struct platform_device *tll6527m_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -857,12 +854,11 @@ static struct platform_device *tll6527m_devices[] __initdata = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) \ - || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -871,15 +867,15 @@ static struct platform_device *tll6527m_devices[] __initdata = { #endif #endif -#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) +#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR) &tll6527m_flash_device, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) &bfin_i2s, #endif -#if defined(CONFIG_GPIO_DECODER) || defined(CONFIG_GPIO_DECODER_MODULE) +#if IS_ENABLED(CONFIG_GPIO_DECODER) &spi_decoded_gpio, #endif }; @@ -931,7 +927,7 @@ void native_machine_restart(char *cmd) bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); } -void bfin_get_ether_addr(char *addr) +int bfin_get_ether_addr(char *addr) { /* the MAC is stored in OTP memory page 0xDF */ u32 ret; @@ -945,5 +941,6 @@ void bfin_get_ether_addr(char *addr) for (ret = 0; ret < 6; ++ret) addr[ret] = otp_mac_p[5 - ret]; } + return 0; } EXPORT_SYMBOL(bfin_get_ether_addr); diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h index 688470611e1..2f9cc33deec 100644 --- a/arch/blackfin/mach-bf527/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h @@ -6,8 +6,7 @@ * DO NOT EDIT THIS FILE * * Copyright 2004-2011 Analog Devices Inc. - * Licensed under the ADI BSD license. - * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd + * Licensed under the Clear BSD license. */ /* This file should be up to date with: @@ -286,5 +285,6 @@ #define ANOMALY_05000448 (0) #define ANOMALY_05000474 (0) #define ANOMALY_05000480 (0) +#define ANOMALY_16000030 (0) #endif diff --git a/arch/blackfin/mach-bf527/include/mach/defBF522.h b/arch/blackfin/mach-bf527/include/mach/defBF522.h index 37d353a1972..e007017cf95 100644 --- a/arch/blackfin/mach-bf527/include/mach/defBF522.h +++ b/arch/blackfin/mach-bf527/include/mach/defBF522.h @@ -1,7 +1,7 @@ /* * Copyright 2007-2010 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) */ #ifndef _DEF_BF522_H @@ -1084,77 +1084,6 @@ #define ERR_NCOR 0x8000 /* Error Not Corrected Indicator */ -/* ******************** TWO-WIRE INTERFACE (TWI) MASKS ***********************/ -/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y); ) */ -#define CLKLOW(x) ((x) & 0xFF) /* Periods Clock Is Held Low */ -#define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */ - -/* TWI_PRESCALE Masks */ -#define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */ -#define TWI_ENA 0x0080 /* TWI Enable */ -#define SCCB 0x0200 /* SCCB Compatibility Enable */ - -/* TWI_SLAVE_CTL Masks */ -#define SEN 0x0001 /* Slave Enable */ -#define SADD_LEN 0x0002 /* Slave Address Length */ -#define STDVAL 0x0004 /* Slave Transmit Data Valid */ -#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */ -#define GEN 0x0010 /* General Call Adrress Matching Enabled */ - -/* TWI_SLAVE_STAT Masks */ -#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */ -#define GCALL 0x0002 /* General Call Indicator */ - -/* TWI_MASTER_CTL Masks */ -#define MEN 0x0001 /* Master Mode Enable */ -#define MADD_LEN 0x0002 /* Master Address Length */ -#define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */ -#define FAST 0x0008 /* Use Fast Mode Timing Specs */ -#define STOP 0x0010 /* Issue Stop Condition */ -#define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */ -#define DCNT 0x3FC0 /* Data Bytes To Transfer */ -#define SDAOVR 0x4000 /* Serial Data Override */ -#define SCLOVR 0x8000 /* Serial Clock Override */ - -/* TWI_MASTER_STAT Masks */ -#define MPROG 0x0001 /* Master Transfer In Progress */ -#define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */ -#define ANAK 0x0004 /* Address Not Acknowledged */ -#define DNAK 0x0008 /* Data Not Acknowledged */ -#define BUFRDERR 0x0010 /* Buffer Read Error */ -#define BUFWRERR 0x0020 /* Buffer Write Error */ -#define SDASEN 0x0040 /* Serial Data Sense */ -#define SCLSEN 0x0080 /* Serial Clock Sense */ -#define BUSBUSY 0x0100 /* Bus Busy Indicator */ - -/* TWI_INT_SRC and TWI_INT_ENABLE Masks */ -#define SINIT 0x0001 /* Slave Transfer Initiated */ -#define SCOMP 0x0002 /* Slave Transfer Complete */ -#define SERR 0x0004 /* Slave Transfer Error */ -#define SOVF 0x0008 /* Slave Overflow */ -#define MCOMP 0x0010 /* Master Transfer Complete */ -#define MERR 0x0020 /* Master Transfer Error */ -#define XMTSERV 0x0040 /* Transmit FIFO Service */ -#define RCVSERV 0x0080 /* Receive FIFO Service */ - -/* TWI_FIFO_CTRL Masks */ -#define XMTFLUSH 0x0001 /* Transmit Buffer Flush */ -#define RCVFLUSH 0x0002 /* Receive Buffer Flush */ -#define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */ -#define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */ - -/* TWI_FIFO_STAT Masks */ -#define XMTSTAT 0x0003 /* Transmit FIFO Status */ -#define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */ -#define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */ -#define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */ - -#define RCVSTAT 0x000C /* Receive FIFO Status */ -#define RCV_EMPTY 0x0000 /* Receive FIFO Empty */ -#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */ -#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */ - - /* Omit CAN masks from defBF534.h */ /* ******************* PIN CONTROL REGISTER MASKS ************************/ diff --git a/arch/blackfin/mach-bf527/include/mach/defBF525.h b/arch/blackfin/mach-bf527/include/mach/defBF525.h index aab80bb1a68..71578d964d0 100644 --- a/arch/blackfin/mach-bf527/include/mach/defBF525.h +++ b/arch/blackfin/mach-bf527/include/mach/defBF525.h @@ -1,7 +1,7 @@ /* * Copyright 2007-2010 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) */ #ifndef _DEF_BF525_H diff --git a/arch/blackfin/mach-bf527/include/mach/defBF527.h b/arch/blackfin/mach-bf527/include/mach/defBF527.h index 05369a92fbc..aeb84795b35 100644 --- a/arch/blackfin/mach-bf527/include/mach/defBF527.h +++ b/arch/blackfin/mach-bf527/include/mach/defBF527.h @@ -1,7 +1,7 @@ /* * Copyright 2007-2010 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) */ #ifndef _DEF_BF527_H diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c index 6cb7b3ed9b3..01300f40db1 100644 --- a/arch/blackfin/mach-bf533/boards/H8606.c +++ b/arch/blackfin/mach-bf533/boards/H8606.c @@ -14,7 +14,7 @@ #include <linux/mtd/partitions.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) #include <linux/usb/isp1362.h> #endif #include <linux/irq.h> @@ -29,7 +29,7 @@ */ const char bfin_board_name[] = "HV Sistemas H8606"; -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, @@ -39,7 +39,7 @@ static struct platform_device rtc_device = { /* * Driver needs to know address, irq and flag pin. */ - #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +#if IS_ENABLED(CONFIG_DM9000) static struct resource dm9000_resources[] = { [0] = { .start = 0x20300000, @@ -67,7 +67,7 @@ static struct platform_device dm9000_device = { }; #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -104,7 +104,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x20300000, @@ -125,10 +125,10 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* all SPI peripherals info goes here */ -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader (spi)", @@ -166,7 +166,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { /* Notice: for blackfin, the speed_hz is the value of register * SPI_BAUD, not the real baudrate */ static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -180,7 +180,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 16, @@ -229,7 +229,7 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -280,7 +280,7 @@ static struct platform_device bfin_uart0_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -309,7 +309,7 @@ static struct platform_device bfin_sir0_device = { #endif #endif -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_8250) #include <linux/serial_8250.h> #include <linux/serial.h> @@ -353,7 +353,7 @@ static struct platform_device serial8250_device = { #endif -#if defined(CONFIG_KEYBOARD_OPENCORES) || defined(CONFIG_KEYBOARD_OPENCORES_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_OPENCORES) /* * Configuration for one OpenCores keyboard controller in FPGA at address 0x20200030, @@ -382,43 +382,43 @@ static struct platform_device opencores_kbd_device = { #endif static struct platform_device *h8606_devices[] __initdata = { -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +#if IS_ENABLED(CONFIG_DM9000) &dm9000_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif #endif -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_8250) &serial8250_device, #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif #endif -#if defined(CONFIG_KEYBOARD_OPENCORES) || defined(CONFIG_KEYBOARD_OPENCORES_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_OPENCORES) &opencores_kbd_device, #endif }; @@ -428,7 +428,7 @@ static int __init H8606_init(void) printk(KERN_INFO "HV Sistemas H8606 board support by http://www.hvsistemas.com\n"); printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(h8606_devices, ARRAY_SIZE(h8606_devices)); -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif return 0; diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c index de44a3765e5..0ccf0cf4daa 100644 --- a/arch/blackfin/mach-bf533/boards/blackstamp.c +++ b/arch/blackfin/mach-bf533/boards/blackstamp.c @@ -20,6 +20,7 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/irq.h> +#include <linux/gpio.h> #include <linux/i2c.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> @@ -31,7 +32,7 @@ */ const char bfin_board_name[] = "BlackStamp"; -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, @@ -41,7 +42,7 @@ static struct platform_device rtc_device = { /* * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -74,7 +75,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -105,14 +106,14 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -125,7 +126,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -136,7 +137,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -146,7 +147,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { [0] = { @@ -184,7 +185,7 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -235,7 +236,7 @@ static struct platform_device bfin_uart0_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -264,7 +265,7 @@ static struct platform_device bfin_sir0_device = { #endif #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -335,7 +336,7 @@ static struct platform_device bfin_sport1_uart_device = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -358,7 +359,7 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) +#if IS_ENABLED(CONFIG_I2C_GPIO) #include <linux/i2c-gpio.h> static struct i2c_gpio_platform_data i2c_gpio_data = { @@ -413,32 +414,32 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -447,11 +448,11 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) +#if IS_ENABLED(CONFIG_I2C_GPIO) &i2c_gpio_device, #endif }; @@ -469,7 +470,7 @@ static int __init blackstamp_init(void) if (ret < 0) return ret; -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) /* * setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC. * the bfin-async-map driver takes care of flipping between diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c index fe47e048c4e..4ef2fb0e48d 100644 --- a/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -15,7 +15,7 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/spi/mmc_spi.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) #include <linux/usb/isp1362.h> #endif #include <linux/irq.h> @@ -29,9 +29,9 @@ */ const char bfin_board_name[] = "Bluetechnix CM BF533"; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* all SPI peripherals info goes here */ -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -62,14 +62,14 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -82,7 +82,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -91,7 +91,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -140,14 +140,14 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -178,7 +178,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#if IS_ENABLED(CONFIG_SMSC911X) #include <linux/smsc911x.h> static struct resource smsc911x_resources[] = { @@ -212,7 +212,7 @@ static struct platform_device smsc911x_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -263,7 +263,7 @@ static struct platform_device bfin_uart0_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -292,7 +292,7 @@ static struct platform_device bfin_sir0_device = { #endif #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -363,7 +363,7 @@ static struct platform_device bfin_sport1_uart_device = { #endif #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) static struct resource isp1362_hcd_resources[] = { { .start = 0x20308000, @@ -403,7 +403,7 @@ static struct platform_device isp1362_hcd_device = { #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x20300000, @@ -426,7 +426,7 @@ static struct platform_device net2272_bfin_device = { -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition para_partitions[] = { { .name = "bootloader(nor)", @@ -495,19 +495,19 @@ static struct platform_device *cm_bf533_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -516,31 +516,31 @@ static struct platform_device *cm_bf533_devices[] __initdata = { #endif #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) &isp1362_hcd_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#if IS_ENABLED(CONFIG_SMSC911X) &smsc911x_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) ¶_flash_device, #endif }; @@ -549,7 +549,7 @@ static int __init cm_bf533_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf533_devices, ARRAY_SIZE(cm_bf533_devices)); -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif return 0; diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index 07811c209b9..3625e9eaa8a 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -14,7 +14,7 @@ #include <linux/mtd/physmap.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) #include <linux/usb/isp1362.h> #endif #include <linux/irq.h> @@ -29,7 +29,7 @@ */ const char bfin_board_name[] = "ADI BF533-EZKIT"; -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, @@ -40,7 +40,7 @@ static struct platform_device rtc_device = { * USB-LAN EzExtender board * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -72,7 +72,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition ezkit_partitions_a[] = { { .name = "bootloader(nor a)", @@ -138,7 +138,7 @@ static struct platform_device ezkit_flash_device_b = { }; #endif -#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE) +#if IS_ENABLED(CONFIG_MTD_PLATRAM) static struct platdata_mtd_ram sram_data_a = { .mapname = "Flash A SRAM", .bankwidth = 2, @@ -182,7 +182,7 @@ static struct platform_device sram_device_b = { }; #endif -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -214,7 +214,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -227,7 +227,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -235,7 +235,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 4, }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -245,7 +245,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { [0] = { @@ -283,7 +283,7 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -334,7 +334,7 @@ static struct platform_device bfin_uart0_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -363,7 +363,7 @@ static struct platform_device bfin_sir0_device = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -387,7 +387,7 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) +#if IS_ENABLED(CONFIG_I2C_GPIO) #include <linux/i2c-gpio.h> static struct i2c_gpio_platform_data i2c_gpio_data = { @@ -435,14 +435,14 @@ static struct platform_device bfin_dpmc = { }; static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_7393) { I2C_BOARD_INFO("bfin-adv7393", 0x2B), }, #endif }; -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) static struct platform_device bfin_i2s = { .name = "bfin-i2s", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -450,15 +450,7 @@ static struct platform_device bfin_i2s = { }; #endif -#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) -static struct platform_device bfin_tdm = { - .name = "bfin-tdm", - .id = CONFIG_SND_BF5XX_SPORT_NUM, - /* TODO: add platform data here */ -}; -#endif - -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) static struct platform_device bfin_ac97 = { .name = "bfin-ac97", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -470,57 +462,53 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &ezkit_flash_device_a, &ezkit_flash_device_b, #endif -#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE) +#if IS_ENABLED(CONFIG_MTD_PLATRAM) &sram_device_a, &sram_device_b, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) +#if IS_ENABLED(CONFIG_I2C_GPIO) &i2c_gpio_device, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) &bfin_i2s, #endif -#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) - &bfin_tdm, -#endif - -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) &bfin_ac97, #endif }; diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c index e303dae4e2d..39c8e8547b8 100644 --- a/arch/blackfin/mach-bf533/boards/ip0x.c +++ b/arch/blackfin/mach-bf533/boards/ip0x.c @@ -15,7 +15,7 @@ #include <linux/mtd/partitions.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) #include <linux/usb/isp1362.h> #endif #include <asm/irq.h> @@ -32,7 +32,7 @@ const char bfin_board_name[] = "IP04/IP08"; * Driver needs to know address, irq and flag pin. */ #if defined(CONFIG_BFIN532_IP0X) -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +#if IS_ENABLED(CONFIG_DM9000) #include <linux/dm9000.h> @@ -104,10 +104,10 @@ static struct platform_device dm9000_device2 = { #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* all SPI peripherals info goes here */ -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, /* if 1 - block!!! */ }; @@ -116,7 +116,7 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = { /* Notice: for blackfin, the speed_hz is the value of register * SPI_BAUD, not the real baudrate */ static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 2, @@ -142,7 +142,7 @@ static struct platform_device spi_bfin_master_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -193,7 +193,7 @@ static struct platform_device bfin_uart0_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -222,7 +222,7 @@ static struct platform_device bfin_sir0_device = { #endif #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) static struct resource isp1362_hcd_resources[] = { { .start = 0x20300000, @@ -264,29 +264,29 @@ static struct platform_device isp1362_hcd_device = { static struct platform_device *ip0x_devices[] __initdata = { #if defined(CONFIG_BFIN532_IP0X) -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +#if IS_ENABLED(CONFIG_DM9000) &dm9000_device1, &dm9000_device2, #endif #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &spi_bfin_master_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) &isp1362_hcd_device, #endif }; diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index ce88a7165b6..6f4bac969bf 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -14,9 +14,10 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/spi/mmc_spi.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) #include <linux/usb/isp1362.h> #endif +#include <linux/gpio.h> #include <linux/irq.h> #include <linux/i2c.h> #include <asm/dma.h> @@ -30,7 +31,7 @@ */ const char bfin_board_name[] = "ADI BF533-STAMP"; -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, @@ -40,7 +41,7 @@ static struct platform_device rtc_device = { /* * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -73,7 +74,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x20300000, @@ -97,7 +98,7 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE) +#if IS_ENABLED(CONFIG_MTD_BFIN_ASYNC) static struct mtd_partition stamp_partitions[] = { { .name = "bootloader(nor)", @@ -147,7 +148,7 @@ static struct platform_device stamp_flash_device = { }; #endif -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -178,7 +179,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) #define MMC_SPI_CARD_DETECT_INT IRQ_PF5 static int bfin_mmc_spi_init(struct device *dev, irqreturn_t (*detect_int)(int, void *), void *data) @@ -206,7 +207,7 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -219,8 +220,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \ - defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) { .modalias = "ad1836", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -231,7 +231,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -239,7 +239,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 1, }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -252,7 +252,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { [0] = { @@ -290,7 +290,7 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -341,7 +341,7 @@ static struct platform_device bfin_uart0_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -370,7 +370,7 @@ static struct platform_device bfin_sir0_device = { #endif #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -441,7 +441,51 @@ static struct platform_device bfin_sport1_uart_device = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SPORT) +static struct resource bfin_sport0_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_TX, + .end = IRQ_SPORT0_TX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_SPORT0_TX, + .end = CH_SPORT0_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_SPORT0_RX, + .end = CH_SPORT0_RX, + .flags = IORESOURCE_DMA, + }, +}; +static struct platform_device bfin_sport0_device = { + .name = "bfin_sport_raw", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_resources), + .resource = bfin_sport0_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, + }, +}; +#endif + +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -464,7 +508,7 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) +#if IS_ENABLED(CONFIG_I2C_GPIO) #include <linux/i2c-gpio.h> static struct i2c_gpio_platform_data i2c_gpio_data = { @@ -485,29 +529,29 @@ static struct platform_device i2c_gpio_device = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE) +#if IS_ENABLED(CONFIG_JOYSTICK_AD7142) { I2C_BOARD_INFO("ad7142_joystick", 0x2C), .irq = 39, }, #endif -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, #endif -#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE) +#if IS_ENABLED(CONFIG_INPUT_PCF8574) { I2C_BOARD_INFO("pcf8574_keypad", 0x27), .irq = 39, }, #endif -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_7393) { I2C_BOARD_INFO("bfin-adv7393", 0x2B), }, #endif -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("ad5252", 0x2f), }, @@ -541,10 +585,8 @@ static struct platform_device bfin_dpmc = { }, }; -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \ - defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) \ - || defined(CONFIG_SND_BF5XX_AC97) || \ - defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) || \ + IS_ENABLED(CONFIG_SND_BF5XX_AC97) #include <asm/bfin_sport.h> @@ -596,29 +638,35 @@ static struct resource bfin_snd_resources[][4] = { }; #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) static struct platform_device bfin_i2s_pcm = { .name = "bfin-i2s-pcm-audio", .id = -1, }; #endif -#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) -static struct platform_device bfin_tdm_pcm = { - .name = "bfin-tdm-pcm-audio", +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) +static struct platform_device bfin_ac97_pcm = { + .name = "bfin-ac97-pcm-audio", .id = -1, }; #endif -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) -static struct platform_device bfin_ac97_pcm = { - .name = "bfin-ac97-pcm-audio", +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) +static const char * const ad1836_link[] = { + "bfin-i2s.0", + "spi0.4", +}; +static struct platform_device bfin_ad1836_machine = { + .name = "bfin-snd-ad1836", .id = -1, + .dev = { + .platform_data = (void *)ad1836_link, + }, }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \ - defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311) static const unsigned ad73311_gpio[] = { GPIO_PF4, }; @@ -632,22 +680,21 @@ static struct platform_device bfin_ad73311_machine = { }; #endif -#if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_AD73311) static struct platform_device bfin_ad73311_codec_device = { .name = "ad73311", .id = -1, }; #endif -#if defined(CONFIG_SND_SOC_AD74111) || defined(CONFIG_SND_SOC_AD74111_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_AD74111) static struct platform_device bfin_ad74111_codec_device = { .name = "ad74111", .id = -1, }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_I2S) || \ - defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S) static struct platform_device bfin_i2s = { .name = "bfin-i2s", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -660,22 +707,7 @@ static struct platform_device bfin_i2s = { }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_TDM) || \ - defined(CONFIG_SND_BF5XX_SOC_TDM_MODULE) -static struct platform_device bfin_tdm = { - .name = "bfin-tdm", - .id = CONFIG_SND_BF5XX_SPORT_NUM, - .num_resources = - ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]), - .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM], - .dev = { - .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM], - }, -}; -#endif - -#if defined(CONFIG_SND_BF5XX_SOC_AC97) || \ - defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97) static struct platform_device bfin_ac97 = { .name = "bfin-ac97", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -692,36 +724,35 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || \ - defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -730,62 +761,54 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) +#if IS_ENABLED(CONFIG_I2C_GPIO) &i2c_gpio_device, #endif -#if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE) +#if IS_ENABLED(CONFIG_MTD_BFIN_ASYNC) &stamp_flash_device, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) &bfin_i2s_pcm, #endif -#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) - &bfin_tdm_pcm, +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) + &bfin_ac97_pcm, #endif -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) - &bfin_ac97_pcm, +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) + &bfin_ad1836_machine, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \ - defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311) &bfin_ad73311_machine, #endif -#if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_AD73311) &bfin_ad73311_codec_device, #endif -#if defined(CONFIG_SND_SOC_AD74111) || defined(CONFIG_SND_SOC_AD74111_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_AD74111) &bfin_ad74111_codec_device, #endif -#if defined(CONFIG_SND_BF5XX_SOC_I2S) || \ - defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S) &bfin_i2s, #endif -#if defined(CONFIG_SND_BF5XX_SOC_TDM) || \ - defined(CONFIG_SND_BF5XX_SOC_TDM_MODULE) - &bfin_tdm, -#endif - -#if defined(CONFIG_SND_BF5XX_SOC_AC97) || \ - defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97) &bfin_ac97, #endif }; static int __init net2272_init(void) { -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) int ret; /* Set PF0 to 0, PF1 to 1 make /AMS3 work properly */ @@ -831,7 +854,7 @@ static int __init stamp_init(void) if (ret < 0) return ret; -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) /* * setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC. * the bfin-async-map driver takes care of flipping between diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h index 03f2b40912a..0e754efc3cf 100644 --- a/arch/blackfin/mach-bf533/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h @@ -6,8 +6,7 @@ * DO NOT EDIT THIS FILE * * Copyright 2004-2011 Analog Devices Inc. - * Licensed under the ADI BSD license. - * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd + * Licensed under the Clear BSD license. */ /* This file should be up to date with: @@ -379,5 +378,6 @@ #define ANOMALY_05000474 (0) #define ANOMALY_05000480 (0) #define ANOMALY_05000485 (0) +#define ANOMALY_16000030 (0) #endif diff --git a/arch/blackfin/mach-bf533/include/mach/defBF532.h b/arch/blackfin/mach-bf533/include/mach/defBF532.h index 2376d539351..d438150b102 100644 --- a/arch/blackfin/mach-bf533/include/mach/defBF532.h +++ b/arch/blackfin/mach-bf533/include/mach/defBF532.h @@ -3,7 +3,7 @@ * * Copyright 2005-2010 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) */ #ifndef _DEF_BF532_H diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537e.c b/arch/blackfin/mach-bf537/boards/cm_bf537e.c index 0d4a2f61a97..1e7290ef352 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537e.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537e.c @@ -16,25 +16,27 @@ #include <linux/mtd/physmap.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) #include <linux/usb/isp1362.h> #endif #include <linux/ata_platform.h> #include <linux/irq.h> +#include <linux/gpio.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <asm/portmux.h> #include <asm/dpmc.h> +#include <asm/bfin_sport.h> /* * Name the Board for the /proc/cpuinfo */ const char bfin_board_name[] = "Bluetechnix CM BF537E"; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* all SPI peripherals info goes here */ -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -65,14 +67,14 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -85,7 +87,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -94,7 +96,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -143,20 +145,85 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN_SPORT) + +/* SPORT SPI controller data */ +static struct bfin5xx_spi_master bfin_sport_spi0_info = { + .num_chipselect = MAX_BLACKFIN_GPIOS, + .enable_dma = 0, /* master don't support DMA */ + .pin_req = {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_DRPRI, + P_SPORT0_RSCLK, P_SPORT0_TFS, P_SPORT0_RFS, 0}, +}; + +static struct resource bfin_sport_spi0_resource[] = { + [0] = { + .start = SPORT0_TCR1, + .end = SPORT0_TCR1 + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_sport_spi0_device = { + .name = "bfin-sport-spi", + .id = 1, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_sport_spi0_resource), + .resource = bfin_sport_spi0_resource, + .dev = { + .platform_data = &bfin_sport_spi0_info, /* Passed to driver */ + }, +}; + +static struct bfin5xx_spi_master bfin_sport_spi1_info = { + .num_chipselect = MAX_BLACKFIN_GPIOS, + .enable_dma = 0, /* master don't support DMA */ + .pin_req = {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_DRPRI, + P_SPORT1_RSCLK, P_SPORT1_TFS, P_SPORT1_RFS, 0}, +}; + +static struct resource bfin_sport_spi1_resource[] = { + [0] = { + .start = SPORT1_TCR1, + .end = SPORT1_TCR1 + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_SPORT1_ERROR, + .end = IRQ_SPORT1_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_sport_spi1_device = { + .name = "bfin-sport-spi", + .id = 2, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_sport_spi1_resource), + .resource = bfin_sport_spi1_resource, + .dev = { + .platform_data = &bfin_sport_spi1_info, /* Passed to driver */ + }, +}; + +#endif /* sport spi master and devices */ + +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) +#if IS_ENABLED(CONFIG_FB_HITACHI_TX09) static struct platform_device hitachi_fb_device = { .name = "hitachi-tx09", }; #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -188,7 +255,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) static struct resource isp1362_hcd_resources[] = { { .start = 0x20308000, @@ -227,7 +294,7 @@ static struct platform_device isp1362_hcd_device = { }; #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x20300000, @@ -248,7 +315,7 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) +#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR) static struct mtd_partition cm_partitions[] = { { .name = "bootloader(nor)", @@ -297,7 +364,7 @@ static struct platform_device cm_flash_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -432,7 +499,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -485,7 +552,9 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) +static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; + static struct resource bfin_twi0_resource[] = { [0] = { .start = TWI0_REGBASE, @@ -504,10 +573,20 @@ static struct platform_device i2c_bfin_twi_device = { .id = 0, .num_resources = ARRAY_SIZE(bfin_twi0_resource), .resource = bfin_twi0_resource, + .dev = { + .platform_data = &bfin_twi0_pins, + }, }; #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) \ +|| IS_ENABLED(CONFIG_BFIN_SPORT) +unsigned short bfin_sport0_peripherals[] = { + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 +}; +#endif +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -527,11 +606,6 @@ static struct resource bfin_sport0_uart_resources[] = { }, }; -static unsigned short bfin_sport0_peripherals[] = { - P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, - P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0 -}; - static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", .id = 0, @@ -577,8 +651,51 @@ static struct platform_device bfin_sport1_uart_device = { }; #endif #endif +#if IS_ENABLED(CONFIG_BFIN_SPORT) +static struct resource bfin_sport0_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_TX, + .end = IRQ_SPORT0_TX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_SPORT0_TX, + .end = CH_SPORT0_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_SPORT0_RX, + .end = CH_SPORT0_RX, + .flags = IORESOURCE_DMA, + }, +}; +static struct platform_device bfin_sport0_device = { + .name = "bfin_sport_raw", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_resources), + .resource = bfin_sport0_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_MII0; @@ -611,7 +728,7 @@ static struct platform_device bfin_mac_device = { }; #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) #define PATA_INT IRQ_PF14 static struct pata_platform_info bfin_pata_platform_data = { @@ -679,15 +796,19 @@ static struct platform_device *cm_bf537e_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SPORT) + &bfin_sport0_device, +#endif + +#if IS_ENABLED(CONFIG_FB_HITACHI_TX09) &hitachi_fb_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -696,7 +817,7 @@ static struct platform_device *cm_bf537e_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -705,11 +826,11 @@ static struct platform_device *cm_bf537e_devices[] __initdata = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -718,39 +839,44 @@ static struct platform_device *cm_bf537e_devices[] __initdata = { #endif #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) &isp1362_hcd_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN_SPORT) + &bfin_sport_spi0_device, + &bfin_sport_spi1_device, +#endif + +#if IS_ENABLED(CONFIG_PATA_PLATFORM) &bfin_pata_device, #endif -#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) +#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR) &cm_flash_device, #endif }; static int __init net2272_init(void) { -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) int ret; ret = gpio_request(GPIO_PG14, "net2272"); @@ -770,11 +896,11 @@ static int __init cm_bf537e_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf537e_devices, ARRAY_SIZE(cm_bf537e_devices)); -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN); #endif @@ -813,9 +939,8 @@ void __init native_machine_early_platform_add_devices(void) ARRAY_SIZE(cm_bf537e_early_devices)); } -void bfin_get_ether_addr(char *addr) +int bfin_get_ether_addr(char *addr) { - random_ether_addr(addr); - printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__); + return 1; } EXPORT_SYMBOL(bfin_get_ether_addr); diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537u.c b/arch/blackfin/mach-bf537/boards/cm_bf537u.c index f5536982706..c7495dc7469 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537u.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537u.c @@ -16,11 +16,12 @@ #include <linux/mtd/physmap.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) #include <linux/usb/isp1362.h> #endif #include <linux/ata_platform.h> #include <linux/irq.h> +#include <linux/gpio.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <asm/portmux.h> @@ -32,10 +33,10 @@ */ const char bfin_board_name[] = "Bluetechnix CM BF537U"; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* all SPI peripherals info goes here */ -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -66,14 +67,14 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -86,7 +87,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -95,7 +96,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -144,20 +145,20 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) +#if IS_ENABLED(CONFIG_FB_HITACHI_TX09) static struct platform_device hitachi_fb_device = { .name = "hitachi-tx09", }; #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -189,7 +190,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) static struct resource isp1362_hcd_resources[] = { { .start = 0x20308000, @@ -228,7 +229,7 @@ static struct platform_device isp1362_hcd_device = { }; #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x20200000, @@ -249,7 +250,7 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) +#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR) static struct mtd_partition cm_partitions[] = { { .name = "bootloader(nor)", @@ -298,7 +299,7 @@ static struct platform_device cm_flash_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -397,7 +398,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -450,7 +451,9 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) +static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; + static struct resource bfin_twi0_resource[] = { [0] = { .start = TWI0_REGBASE, @@ -469,10 +472,13 @@ static struct platform_device i2c_bfin_twi_device = { .id = 0, .num_resources = ARRAY_SIZE(bfin_twi0_resource), .resource = bfin_twi0_resource, + .dev = { + .platform_data = &bfin_twi0_pins, + }, }; #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -543,7 +549,7 @@ static struct platform_device bfin_sport1_uart_device = { #endif #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_MII0; @@ -576,7 +582,7 @@ static struct platform_device bfin_mac_device = { }; #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) #define PATA_INT IRQ_PF14 static struct pata_platform_info bfin_pata_platform_data = { @@ -644,15 +650,15 @@ static struct platform_device *cm_bf537u_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) +#if IS_ENABLED(CONFIG_FB_HITACHI_TX09) &hitachi_fb_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -661,7 +667,7 @@ static struct platform_device *cm_bf537u_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -670,11 +676,11 @@ static struct platform_device *cm_bf537u_devices[] __initdata = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -683,39 +689,39 @@ static struct platform_device *cm_bf537u_devices[] __initdata = { #endif #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) &isp1362_hcd_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) &bfin_pata_device, #endif -#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) +#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR) &cm_flash_device, #endif }; static int __init net2272_init(void) { -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) int ret; ret = gpio_request(GPIO_PH15, driver_name); @@ -747,11 +753,11 @@ static int __init cm_bf537u_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf537u_devices, ARRAY_SIZE(cm_bf537u_devices)); -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN); #endif @@ -790,9 +796,8 @@ void __init native_machine_early_platform_add_devices(void) ARRAY_SIZE(cm_bf537u_early_devices)); } -void bfin_get_ether_addr(char *addr) +int bfin_get_ether_addr(char *addr) { - random_ether_addr(addr); - printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__); + return 1; } EXPORT_SYMBOL(bfin_get_ether_addr); diff --git a/arch/blackfin/mach-bf537/boards/dnp5370.c b/arch/blackfin/mach-bf537/boards/dnp5370.c index 11dadeb33d7..e79b3b810c3 100644 --- a/arch/blackfin/mach-bf537/boards/dnp5370.c +++ b/arch/blackfin/mach-bf537/boards/dnp5370.c @@ -41,14 +41,14 @@ const char bfin_board_name[] = "DNP/5370"; #define FLASH_MAC 0x202f0000 #define CONFIG_MTD_PHYSMAP_LEN 0x300000 -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_RMII0; @@ -81,7 +81,7 @@ static struct platform_device bfin_mac_device = { }; #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition asmb_flash_partitions[] = { { .name = "bootloader(nor)", @@ -125,9 +125,9 @@ static struct platform_device asmb_flash_device = { }; #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, /* use no dma transfer with this chip*/ @@ -135,7 +135,7 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = { #endif -#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE) +#if IS_ENABLED(CONFIG_MTD_DATAFLASH) /* This mapping is for at45db642 it has 1056 page size, * partition size and offset should be page aligned */ @@ -166,7 +166,7 @@ static struct bfin5xx_spi_chip spi_dataflash_chip_info = { static struct spi_board_info bfin_spi_board_info[] __initdata = { /* SD/MMC card reader at SPI bus */ -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 20000000, @@ -178,7 +178,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif /* 8 Megabyte Atmel NOR flash chip at SPI bus */ -#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE) +#if IS_ENABLED(CONFIG_MTD_DATAFLASH) { .modalias = "mtd_dataflash", .max_speed_hz = 16700000, @@ -228,7 +228,7 @@ static struct platform_device spi_bfin_master_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -328,7 +328,9 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) +static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; + static struct resource bfin_twi0_resource[] = { [0] = { .start = TWI0_REGBASE, @@ -347,12 +349,15 @@ static struct platform_device i2c_bfin_twi_device = { .id = 0, .num_resources = ARRAY_SIZE(bfin_twi0_resource), .resource = bfin_twi0_resource, + .dev = { + .platform_data = &bfin_twi0_pins, + }, }; #endif static struct platform_device *dnp5370_devices[] __initdata = { -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -361,24 +366,24 @@ static struct platform_device *dnp5370_devices[] __initdata = { #endif #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &asmb_flash_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &spi_bfin_master_device, #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif @@ -399,9 +404,10 @@ arch_initcall(dnp5370_init); /* * Currently the MAC address is saved in Flash by U-Boot */ -void bfin_get_ether_addr(char *addr) +int bfin_get_ether_addr(char *addr) { *(u32 *)(&(addr[0])) = bfin_read32(FLASH_MAC); *(u16 *)(&(addr[4])) = bfin_read16(FLASH_MAC + 4); + return 0; } EXPORT_SYMBOL(bfin_get_ether_addr); diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c index d2d71282618..dd7bda07bf9 100644 --- a/arch/blackfin/mach-bf537/boards/minotaur.c +++ b/arch/blackfin/mach-bf537/boards/minotaur.c @@ -13,7 +13,7 @@ #include <linux/mtd/partitions.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) #include <linux/usb/isp1362.h> #endif #include <linux/ata_platform.h> @@ -31,7 +31,7 @@ */ const char bfin_board_name[] = "CamSig Minotaur BF537"; -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) static struct resource bfin_pcmcia_cf_resources[] = { { .start = 0x20310000, /* IO PORT */ @@ -60,14 +60,14 @@ static struct platform_device bfin_pcmcia_cf_device = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_MII0; @@ -100,7 +100,7 @@ static struct platform_device bfin_mac_device = { }; #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x20300000, @@ -121,11 +121,10 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* all SPI peripherals info goes here */ -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) /* Partition sizes */ #define FLASH_SIZE 0x00400000 @@ -162,15 +161,14 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -183,7 +181,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ @@ -231,7 +229,7 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -330,7 +328,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -385,7 +383,9 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) +static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; + static struct resource bfin_twi0_resource[] = { [0] = { .start = TWI0_REGBASE, @@ -404,10 +404,13 @@ static struct platform_device i2c_bfin_twi_device = { .id = 0, .num_resources = ARRAY_SIZE(bfin_twi0_resource), .resource = bfin_twi0_resource, + .dev = { + .platform_data = &bfin_twi0_pins, + }, }; #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -479,28 +482,28 @@ static struct platform_device bfin_sport1_uart_device = { #endif static struct platform_device *minotaur_devices[] __initdata = { -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) &bfin_pcmcia_cf_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -509,7 +512,7 @@ static struct platform_device *minotaur_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -518,11 +521,11 @@ static struct platform_device *minotaur_devices[] __initdata = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -537,7 +540,7 @@ static int __init minotaur_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(minotaur_devices, ARRAY_SIZE(minotaur_devices)); -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index 6fd84709fc6..06a50ddb54c 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -30,7 +30,7 @@ const char bfin_board_name[] = "ADI PNAV-1.0"; * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) static struct resource bfin_pcmcia_cf_resources[] = { { .start = 0x20310000, /* IO PORT */ @@ -59,14 +59,14 @@ static struct platform_device bfin_pcmcia_cf_device = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -99,9 +99,8 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> -#include <linux/export.h> static const unsigned short bfin_mac_peripherals[] = P_RMII0; static struct bfin_phydev_platform_data bfin_phydev_data[] = { @@ -133,7 +132,7 @@ static struct platform_device bfin_mac_device = { }; #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x20300000, @@ -154,11 +153,10 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* all SPI peripherals info goes here */ -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -189,13 +187,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -212,8 +210,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -226,8 +223,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ - || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -235,7 +231,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 4, }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ @@ -245,7 +241,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, @@ -295,13 +291,13 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) +#if IS_ENABLED(CONFIG_FB_BF537_LQ035) static struct platform_device bfin_fb_device = { .name = "bf537-lq035", }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -400,7 +396,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -456,36 +452,36 @@ static struct platform_device bfin_sir1_device = { #endif static struct platform_device *stamp_devices[] __initdata = { -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) &bfin_pcmcia_cf_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) +#if IS_ENABLED(CONFIG_FB_BF537_LQ035) &bfin_fb_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -494,7 +490,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -508,7 +504,7 @@ static int __init pnav_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif @@ -535,9 +531,8 @@ void __init native_machine_early_platform_add_devices(void) ARRAY_SIZE(stamp_early_devices)); } -void bfin_get_ether_addr(char *addr) +int bfin_get_ether_addr(char *addr) { - random_ether_addr(addr); - printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__); + return 1; } EXPORT_SYMBOL(bfin_get_ether_addr); diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 2221173e489..de19b8a5600 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -18,7 +18,7 @@ #include <linux/mtd/physmap.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) #include <linux/usb/isp1362.h> #endif #include <linux/i2c.h> @@ -53,7 +53,7 @@ const char bfin_board_name[] = "ADI BF537-STAMP"; * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) #include <linux/usb/isp1760.h> static struct resource bfin_isp1760_resources[] = { [0] = { @@ -88,7 +88,7 @@ static struct platform_device bfin_isp1760_device = { }; #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/gpio_keys.h> static struct gpio_keys_button bfin_gpio_keys_table[] = { @@ -111,7 +111,7 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) static struct resource bfin_pcmcia_cf_resources[] = { { .start = 0x20310000, /* IO PORT */ @@ -140,14 +140,14 @@ static struct platform_device bfin_pcmcia_cf_device = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -180,7 +180,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +#if IS_ENABLED(CONFIG_DM9000) static struct resource dm9000_resources[] = { [0] = { .start = 0x203FB800, @@ -207,7 +207,7 @@ static struct platform_device dm9000_device = { }; #endif -#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_SL811_HCD) static struct resource sl811_hcd_resources[] = { { .start = 0x20340000, @@ -251,7 +251,7 @@ static struct platform_device sl811_hcd_device = { }; #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) static struct resource isp1362_hcd_resources[] = { { .start = 0x20360000, @@ -290,7 +290,7 @@ static struct platform_device isp1362_hcd_device = { }; #endif -#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) +#if IS_ENABLED(CONFIG_CAN_BFIN) static unsigned short bfin_can_peripherals[] = { P_CAN0_RX, P_CAN0_TX, 0 }; @@ -328,7 +328,7 @@ static struct platform_device bfin_can_device = { }; #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_MII0; @@ -361,7 +361,7 @@ static struct platform_device bfin_mac_device = { }; #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x20300000, @@ -385,7 +385,7 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM) const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL }; static struct mtd_partition bfin_plat_nand_partitions[] = { @@ -455,12 +455,13 @@ static struct platform_device bfin_async_nand_device = { static void bfin_plat_nand_init(void) { gpio_request(BFIN_NAND_PLAT_READY, "bfin_nand_plat"); + gpio_direction_input(BFIN_NAND_PLAT_READY); } #else static void bfin_plat_nand_init(void) {} #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition stamp_partitions[] = { { .name = "bootloader(nor)", @@ -508,8 +509,7 @@ static struct platform_device stamp_flash_device = { }; #endif -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -540,7 +540,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE) +#if IS_ENABLED(CONFIG_INPUT_AD714X_SPI) #include <linux/input/ad714x.h> static struct ad714x_slider_plat ad7147_spi_slider_plat[] = { @@ -601,7 +601,7 @@ static struct ad714x_platform_data ad7147_spi_platform_data = { }; #endif -#if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE) +#if IS_ENABLED(CONFIG_INPUT_AD714X_I2C) #include <linux/input/ad714x.h> static struct ad714x_button_plat ad7142_i2c_button_plat[] = { { @@ -648,24 +648,24 @@ static struct ad714x_platform_data ad7142_i2c_platform_data = { }; #endif -#if defined(CONFIG_AD2S90) || defined(CONFIG_AD2S90_MODULE) +#if IS_ENABLED(CONFIG_AD2S90) static struct bfin5xx_spi_chip ad2s90_spi_chip_info = { .enable_dma = 0, }; #endif -#if defined(CONFIG_AD2S120X) || defined(CONFIG_AD2S120X_MODULE) -static unsigned short ad2s120x_platform_data[] = { +#if IS_ENABLED(CONFIG_AD2S1200) +static unsigned short ad2s1200_platform_data[] = { /* used as SAMPLE and RDVEL */ GPIO_PF5, GPIO_PF6, 0 }; -static struct bfin5xx_spi_chip ad2s120x_spi_chip_info = { +static struct bfin5xx_spi_chip ad2s1200_spi_chip_info = { .enable_dma = 0, }; #endif -#if defined(CONFIG_AD2S1210) || defined(CONFIG_AD2S1210_MODULE) +#if IS_ENABLED(CONFIG_AD2S1210) static unsigned short ad2s1210_platform_data[] = { /* use as SAMPLE, A0, A1 */ GPIO_PF7, GPIO_PF8, GPIO_PF9, @@ -681,13 +681,13 @@ static struct bfin5xx_spi_chip ad2s1210_spi_chip_info = { }; #endif -#if defined(CONFIG_AD7314) || defined(CONFIG_AD7314_MODULE) +#if IS_ENABLED(CONFIG_SENSORS_AD7314) static struct bfin5xx_spi_chip ad7314_spi_chip_info = { .enable_dma = 0, }; #endif -#if defined(CONFIG_AD7816) || defined(CONFIG_AD7816_MODULE) +#if IS_ENABLED(CONFIG_AD7816) static unsigned short ad7816_platform_data[] = { GPIO_PF4, /* rdwr_pin */ GPIO_PF5, /* convert_pin */ @@ -700,7 +700,7 @@ static struct bfin5xx_spi_chip ad7816_spi_chip_info = { }; #endif -#if defined(CONFIG_ADT7310) || defined(CONFIG_ADT7310_MODULE) +#if IS_ENABLED(CONFIG_ADT7310) static unsigned long adt7310_platform_data[3] = { /* INT bound temperature alarm event. line 1 */ IRQ_PG4, IRQF_TRIGGER_LOW, @@ -713,14 +713,14 @@ static struct bfin5xx_spi_chip adt7310_spi_chip_info = { }; #endif -#if defined(CONFIG_AD7298) || defined(CONFIG_AD7298_MODULE) +#if IS_ENABLED(CONFIG_AD7298) static unsigned short ad7298_platform_data[] = { GPIO_PF7, /* busy_pin */ 0, }; #endif -#if defined(CONFIG_ADT7316_SPI) || defined(CONFIG_ADT7316_SPI_MODULE) +#if IS_ENABLED(CONFIG_ADT7316_SPI) static unsigned long adt7316_spi_data[2] = { IRQF_TRIGGER_LOW, /* interrupt flags */ GPIO_PF7, /* ldac_pin, 0 means DAC/LDAC registers control DAC update */ @@ -731,7 +731,7 @@ static struct bfin5xx_spi_chip adt7316_spi_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) #define MMC_SPI_CARD_DETECT_INT IRQ_PF5 static int bfin_mmc_spi_init(struct device *dev, @@ -758,7 +758,7 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = { }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) #include <linux/spi/ad7877.h> static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, @@ -775,7 +775,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879) #include <linux/spi/ad7879.h> static const struct ad7879_platform_data bfin_ad7879_ts_info = { .model = 7879, /* Model = AD7879 */ @@ -792,7 +792,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = { }; #endif -#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE) +#if IS_ENABLED(CONFIG_INPUT_ADXL34X) #include <linux/input/adxl34x.h> static const struct adxl34x_platform_data adxl34x_info = { .x_axis_offset = 0, @@ -831,13 +831,13 @@ static const struct adxl34x_platform_data adxl34x_info = { }; #endif -#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE) +#if IS_ENABLED(CONFIG_ENC28J60) static struct bfin5xx_spi_chip enc28j60_spi_chip_info = { .enable_dma = 1, }; #endif -#if defined(CONFIG_ADF702X) || defined(CONFIG_ADF702X_MODULE) +#if IS_ENABLED(CONFIG_ADF702X) #include <linux/spi/adf702x.h> #define TXREG 0x0160A470 static const u32 adf7021_regs[] = { @@ -873,13 +873,13 @@ static struct adf702x_platform_data adf7021_platform_data = { }; static inline void adf702x_mac_init(void) { - random_ether_addr(adf7021_platform_data.mac_addr); + eth_random_addr(adf7021_platform_data.mac_addr); } #else static inline void adf702x_mac_init(void) {} #endif -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_ADS7846) #include <linux/spi/ads7846.h> static int ads7873_get_pendown_state(void) { @@ -898,8 +898,7 @@ static struct ads7846_platform_data __initdata ad7873_pdata = { }; #endif -#if defined(CONFIG_MTD_DATAFLASH) \ - || defined(CONFIG_MTD_DATAFLASH_MODULE) +#if IS_ENABLED(CONFIG_MTD_DATAFLASH) static struct mtd_partition bfin_spi_dataflash_partitions[] = { { @@ -930,15 +929,14 @@ static struct bfin5xx_spi_chip data_flash_chip_info = { }; #endif -#if defined(CONFIG_AD7476) || defined(CONFIG_AD7476_MODULE) +#if IS_ENABLED(CONFIG_AD7476) static struct bfin5xx_spi_chip spi_ad7476_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ }; #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -950,8 +948,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_MTD_DATAFLASH) \ - || defined(CONFIG_MTD_DATAFLASH_MODULE) +#if IS_ENABLED(CONFIG_MTD_DATAFLASH) { /* DataFlash chip */ .modalias = "mtd_dataflash", .max_speed_hz = 33250000, /* max spi clock (SCK) speed in HZ */ @@ -963,8 +960,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \ - || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) { .modalias = "ad1836", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -975,7 +971,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD193X) || defined(CONFIG_SND_BF5XX_SOC_AD193X_MODULE) +#ifdef CONFIG_SND_SOC_AD193X_SPI { .modalias = "ad193x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -985,7 +981,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_SOC_ADAV80X) || defined(CONFIG_SND_SOC_ADV80X_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_ADAV80X) { .modalias = "adav801", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -995,7 +991,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE) +#if IS_ENABLED(CONFIG_INPUT_AD714X_SPI) { .modalias = "ad714x_captouch", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1007,7 +1003,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_AD2S90) || defined(CONFIG_AD2S90_MODULE) +#if IS_ENABLED(CONFIG_AD2S90) { .modalias = "ad2s90", .bus_num = 0, @@ -1018,17 +1014,17 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_AD2S120X) || defined(CONFIG_AD2S120X_MODULE) +#if IS_ENABLED(CONFIG_AD2S1200) { - .modalias = "ad2s120x", + .modalias = "ad2s1200", .bus_num = 0, .chip_select = 4, /* CS, change it for your board */ - .platform_data = ad2s120x_platform_data, - .controller_data = &ad2s120x_spi_chip_info, + .platform_data = ad2s1200_platform_data, + .controller_data = &ad2s1200_spi_chip_info, }, #endif -#if defined(CONFIG_AD2S1210) || defined(CONFIG_AD2S1210_MODULE) +#if IS_ENABLED(CONFIG_AD2S1210) { .modalias = "ad2s1210", .max_speed_hz = 8192000, @@ -1039,7 +1035,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_AD7314) || defined(CONFIG_AD7314_MODULE) +#if IS_ENABLED(CONFIG_SENSORS_AD7314) { .modalias = "ad7314", .max_speed_hz = 1000000, @@ -1050,7 +1046,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_AD7816) || defined(CONFIG_AD7816_MODULE) +#if IS_ENABLED(CONFIG_AD7816) { .modalias = "ad7818", .max_speed_hz = 1000000, @@ -1062,7 +1058,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_ADT7310) || defined(CONFIG_ADT7310_MODULE) +#if IS_ENABLED(CONFIG_ADT7310) { .modalias = "adt7310", .max_speed_hz = 1000000, @@ -1075,7 +1071,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_AD7298) || defined(CONFIG_AD7298_MODULE) +#if IS_ENABLED(CONFIG_AD7298) { .modalias = "ad7298", .max_speed_hz = 1000000, @@ -1086,7 +1082,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_ADT7316_SPI) || defined(CONFIG_ADT7316_SPI_MODULE) +#if IS_ENABLED(CONFIG_ADT7316_SPI) { .modalias = "adt7316", .max_speed_hz = 1000000, @@ -1099,7 +1095,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -1110,7 +1106,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, @@ -1120,7 +1116,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 1, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI) { .modalias = "ad7879", .platform_data = &bfin_ad7879_ts_info, @@ -1131,7 +1127,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_CPHA | SPI_CPOL, }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -1139,7 +1135,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 1, }, #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) { .modalias = "bfin-lq035q1-spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -1148,7 +1144,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_CPHA | SPI_CPOL, }, #endif -#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE) +#if IS_ENABLED(CONFIG_ENC28J60) { .modalias = "enc28j60", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -1159,7 +1155,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_0, }, #endif -#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE) +#if IS_ENABLED(CONFIG_INPUT_ADXL34X_SPI) { .modalias = "adxl34x", .platform_data = &adxl34x_info, @@ -1170,7 +1166,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_ADF702X) || defined(CONFIG_ADF702X_MODULE) +#if IS_ENABLED(CONFIG_ADF702X) { .modalias = "adf702x", .max_speed_hz = 16000000, /* max spi clock (SCK) speed in HZ */ @@ -1180,7 +1176,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_0, }, #endif -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_ADS7846) { .modalias = "ads7846", .max_speed_hz = 2000000, /* max spi clock (SCK) speed in HZ */ @@ -1191,8 +1187,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_0, }, #endif -#if defined(CONFIG_AD7476) \ - || defined(CONFIG_AD7476_MODULE) +#if IS_ENABLED(CONFIG_AD7476) { .modalias = "ad7476", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ @@ -1203,8 +1198,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_ADE7753) \ - || defined(CONFIG_ADE7753_MODULE) +#if IS_ENABLED(CONFIG_ADE7753) { .modalias = "ade7753", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1214,8 +1208,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_1, }, #endif -#if defined(CONFIG_ADE7754) \ - || defined(CONFIG_ADE7754_MODULE) +#if IS_ENABLED(CONFIG_ADE7754) { .modalias = "ade7754", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1225,8 +1218,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_1, }, #endif -#if defined(CONFIG_ADE7758) \ - || defined(CONFIG_ADE7758_MODULE) +#if IS_ENABLED(CONFIG_ADE7758) { .modalias = "ade7758", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1236,8 +1228,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_1, }, #endif -#if defined(CONFIG_ADE7759) \ - || defined(CONFIG_ADE7759_MODULE) +#if IS_ENABLED(CONFIG_ADE7759) { .modalias = "ade7759", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1247,8 +1238,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_1, }, #endif -#if defined(CONFIG_ADE7854_SPI) \ - || defined(CONFIG_ADE7854_SPI_MODULE) +#if IS_ENABLED(CONFIG_ADE7854_SPI) { .modalias = "ade7854", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1258,8 +1248,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_ADIS16060) \ - || defined(CONFIG_ADIS16060_MODULE) +#if IS_ENABLED(CONFIG_ADIS16060) { .modalias = "adis16060_r", .max_speed_hz = 2900000, /* max spi clock (SCK) speed in HZ */ @@ -1277,8 +1266,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_1, }, #endif -#if defined(CONFIG_ADIS16130) \ - || defined(CONFIG_ADIS16130_MODULE) +#if IS_ENABLED(CONFIG_ADIS16130) { .modalias = "adis16130", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1288,8 +1276,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_ADIS16201) \ - || defined(CONFIG_ADIS16201_MODULE) +#if IS_ENABLED(CONFIG_ADIS16201) { .modalias = "adis16201", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1300,8 +1287,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .irq = IRQ_PF4, }, #endif -#if defined(CONFIG_ADIS16203) \ - || defined(CONFIG_ADIS16203_MODULE) +#if IS_ENABLED(CONFIG_ADIS16203) { .modalias = "adis16203", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1312,8 +1298,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .irq = IRQ_PF4, }, #endif -#if defined(CONFIG_ADIS16204) \ - || defined(CONFIG_ADIS16204_MODULE) +#if IS_ENABLED(CONFIG_ADIS16204) { .modalias = "adis16204", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1324,8 +1309,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .irq = IRQ_PF4, }, #endif -#if defined(CONFIG_ADIS16209) \ - || defined(CONFIG_ADIS16209_MODULE) +#if IS_ENABLED(CONFIG_ADIS16209) { .modalias = "adis16209", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1336,8 +1320,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .irq = IRQ_PF4, }, #endif -#if defined(CONFIG_ADIS16220) \ - || defined(CONFIG_ADIS16220_MODULE) +#if IS_ENABLED(CONFIG_ADIS16220) { .modalias = "adis16220", .max_speed_hz = 2000000, /* max spi clock (SCK) speed in HZ */ @@ -1348,8 +1331,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .irq = IRQ_PF4, }, #endif -#if defined(CONFIG_ADIS16240) \ - || defined(CONFIG_ADIS16240_MODULE) +#if IS_ENABLED(CONFIG_ADIS16240) { .modalias = "adis16240", .max_speed_hz = 1500000, /* max spi clock (SCK) speed in HZ */ @@ -1360,8 +1342,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .irq = IRQ_PF4, }, #endif -#if defined(CONFIG_ADIS16260) \ - || defined(CONFIG_ADIS16260_MODULE) +#if IS_ENABLED(CONFIG_ADIS16260) { .modalias = "adis16260", .max_speed_hz = 1500000, /* max spi clock (SCK) speed in HZ */ @@ -1372,8 +1353,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .irq = IRQ_PF4, }, #endif -#if defined(CONFIG_ADIS16261) \ - || defined(CONFIG_ADIS16261_MODULE) +#if IS_ENABLED(CONFIG_ADIS16261) { .modalias = "adis16261", .max_speed_hz = 2500000, /* max spi clock (SCK) speed in HZ */ @@ -1383,8 +1363,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_ADIS16300) \ - || defined(CONFIG_ADIS16300_MODULE) +#if IS_ENABLED(CONFIG_ADIS16300) { .modalias = "adis16300", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1395,8 +1374,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .irq = IRQ_PF4, }, #endif -#if defined(CONFIG_ADIS16350) \ - || defined(CONFIG_ADIS16350_MODULE) +#if IS_ENABLED(CONFIG_ADIS16350) { .modalias = "adis16364", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1407,8 +1385,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .irq = IRQ_PF4, }, #endif -#if defined(CONFIG_ADIS16400) \ - || defined(CONFIG_ADIS16400_MODULE) +#if IS_ENABLED(CONFIG_ADIS16400) { .modalias = "adis16400", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1420,7 +1397,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI controller data */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, @@ -1458,7 +1435,7 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN_SPORT) /* SPORT SPI controller data */ static struct bfin5xx_spi_master bfin_sport_spi0_info = { @@ -1523,13 +1500,13 @@ static struct platform_device bfin_sport_spi1_device = { #endif /* sport spi master and devices */ -#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) +#if IS_ENABLED(CONFIG_FB_BF537_LQ035) static struct platform_device bfin_fb_device = { - .name = "bf537-lq035", + .name = "bf537_lq035", }; #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) #include <asm/bfin-lq035q1.h> static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = { @@ -1558,8 +1535,7 @@ static struct platform_device bfin_lq035q1_device = { }; #endif -#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \ - || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE) #include <linux/videodev2.h> #include <media/blackfin/bfin_capture.h> #include <media/blackfin/ppi.h> @@ -1579,8 +1555,7 @@ static const struct ppi_info ppi_info = { .pin_req = ppi_req, }; -#if defined(CONFIG_VIDEO_VS6624) \ - || defined(CONFIG_VIDEO_VS6624_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_VS6624) static struct v4l2_input vs6624_inputs[] = { { .index = 0, @@ -1623,7 +1598,7 @@ static struct platform_device bfin_capture_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -1734,7 +1709,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -1789,7 +1764,9 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) +static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; + static struct resource bfin_twi0_resource[] = { [0] = { .start = TWI0_REGBASE, @@ -1808,10 +1785,13 @@ static struct platform_device i2c_bfin_twi_device = { .id = 0, .num_resources = ARRAY_SIZE(bfin_twi0_resource), .resource = bfin_twi0_resource, + .dev = { + .platform_data = &bfin_twi0_pins, + }, }; #endif -#if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_ADP5588) static const unsigned short adp5588_keymap[ADP5588_KEYMAPSIZE] = { [0] = KEY_GRAVE, [1] = KEY_1, @@ -1896,7 +1876,7 @@ static struct adp5588_kpad_platform_data adp5588_kpad_data = { }; #endif -#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE) +#if IS_ENABLED(CONFIG_PMIC_ADP5520) #include <linux/mfd/adp5520.h> /* @@ -2007,14 +1987,14 @@ static struct adp5520_platform_data adp5520_pdev_data = { #endif -#if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE) +#if IS_ENABLED(CONFIG_GPIO_ADP5588) static struct adp5588_gpio_platform_data adp5588_gpio_data = { .gpio_start = 50, .pullup_dis_mask = 0, }; #endif -#if defined(CONFIG_BACKLIGHT_ADP8870) || defined(CONFIG_BACKLIGHT_ADP8870_MODULE) +#if IS_ENABLED(CONFIG_BACKLIGHT_ADP8870) #include <linux/i2c/adp8870.h> static struct led_info adp8870_leds[] = { { @@ -2066,7 +2046,7 @@ static struct adp8870_backlight_platform_data adp8870_pdata = { }; #endif -#if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE) +#if IS_ENABLED(CONFIG_BACKLIGHT_ADP8860) #include <linux/i2c/adp8860.h> static struct led_info adp8860_leds[] = { { @@ -2108,7 +2088,7 @@ static struct adp8860_backlight_platform_data adp8860_pdata = { }; #endif -#if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE) +#if IS_ENABLED(CONFIG_REGULATOR_AD5398) static struct regulator_consumer_supply ad5398_consumer = { .supply = "current", }; @@ -2123,8 +2103,7 @@ static struct regulator_init_data ad5398_regulator_data = { .consumer_supplies = &ad5398_consumer, }; -#if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \ - defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE) +#if IS_ENABLED(CONFIG_REGULATOR_VIRTUAL_CONSUMER) static struct platform_device ad5398_virt_consumer_device = { .name = "reg-virt-consumer", .id = 0, @@ -2133,8 +2112,7 @@ static struct platform_device ad5398_virt_consumer_device = { }, }; #endif -#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \ - defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE) +#if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER) static struct regulator_bulk_data ad5398_bulk_data = { .supply = "current", }; @@ -2155,14 +2133,14 @@ static struct platform_device ad5398_userspace_consumer_device = { #endif #endif -#if defined(CONFIG_ADT7410) || defined(CONFIG_ADT7410_MODULE) +#if IS_ENABLED(CONFIG_ADT7410) /* INT bound temperature alarm event. line 1 */ static unsigned long adt7410_platform_data[2] = { IRQ_PG4, IRQF_TRIGGER_LOW, }; #endif -#if defined(CONFIG_ADT7316_I2C) || defined(CONFIG_ADT7316_I2C_MODULE) +#if IS_ENABLED(CONFIG_ADT7316_I2C) /* INT bound temperature alarm event. line 1 */ static unsigned long adt7316_i2c_data[2] = { IRQF_TRIGGER_LOW, /* interrupt flags */ @@ -2171,19 +2149,19 @@ static unsigned long adt7316_i2c_data[2] = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_SND_BF5XX_SOC_AD193X) || defined(CONFIG_SND_BF5XX_SOC_AD193X_MODULE) +#ifdef CONFIG_SND_SOC_AD193X_I2C { I2C_BOARD_INFO("ad1937", 0x04), }, #endif -#if defined(CONFIG_SND_SOC_ADAV80X) || defined(CONFIG_SND_SOC_ADAV80X_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_ADAV80X) { I2C_BOARD_INFO("adav803", 0x10), }, #endif -#if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE) +#if IS_ENABLED(CONFIG_INPUT_AD714X_I2C) { I2C_BOARD_INFO("ad7142_captouch", 0x2C), .irq = IRQ_PG5, @@ -2191,39 +2169,39 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif -#if defined(CONFIG_AD7150) || defined(CONFIG_AD7150_MODULE) +#if IS_ENABLED(CONFIG_AD7150) { I2C_BOARD_INFO("ad7150", 0x48), .irq = IRQ_PG5, /* fixme: use real interrupt number */ }, #endif -#if defined(CONFIG_AD7152) || defined(CONFIG_AD7152_MODULE) +#if IS_ENABLED(CONFIG_AD7152) { I2C_BOARD_INFO("ad7152", 0x48), }, #endif -#if defined(CONFIG_AD774X) || defined(CONFIG_AD774X_MODULE) +#if IS_ENABLED(CONFIG_AD774X) { I2C_BOARD_INFO("ad774x", 0x48), }, #endif -#if defined(CONFIG_ADE7854_I2C) || defined(CONFIG_ADE7854_I2C_MODULE) +#if IS_ENABLED(CONFIG_ADE7854_I2C) { I2C_BOARD_INFO("ade7854", 0x38), }, #endif -#if defined(CONFIG_ADT75) || defined(CONFIG_ADT75_MODULE) +#if IS_ENABLED(CONFIG_SENSORS_LM75) { I2C_BOARD_INFO("adt75", 0x9), .irq = IRQ_PG5, }, #endif -#if defined(CONFIG_ADT7410) || defined(CONFIG_ADT7410_MODULE) +#if IS_ENABLED(CONFIG_ADT7410) { I2C_BOARD_INFO("adt7410", 0x48), /* CT critical temperature event. line 0 */ @@ -2232,14 +2210,14 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif -#if defined(CONFIG_AD7291) || defined(CONFIG_AD7291_MODULE) +#if IS_ENABLED(CONFIG_AD7291) { I2C_BOARD_INFO("ad7291", 0x20), .irq = IRQ_PG5, }, #endif -#if defined(CONFIG_ADT7316_I2C) || defined(CONFIG_ADT7316_I2C_MODULE) +#if IS_ENABLED(CONFIG_ADT7316_I2C) { I2C_BOARD_INFO("adt7316", 0x48), .irq = IRQ_PG6, @@ -2247,122 +2225,128 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, #endif -#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE) +#if IS_ENABLED(CONFIG_INPUT_PCF8574) { I2C_BOARD_INFO("pcf8574_keypad", 0x27), .irq = IRQ_PG6, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_I2C) { I2C_BOARD_INFO("ad7879", 0x2F), .irq = IRQ_PG5, .platform_data = (void *)&bfin_ad7879_ts_info, }, #endif -#if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_ADP5588) { I2C_BOARD_INFO("adp5588-keys", 0x34), .irq = IRQ_PG0, .platform_data = (void *)&adp5588_kpad_data, }, #endif -#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE) +#if IS_ENABLED(CONFIG_PMIC_ADP5520) { I2C_BOARD_INFO("pmic-adp5520", 0x32), .irq = IRQ_PG0, .platform_data = (void *)&adp5520_pdev_data, }, #endif -#if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE) +#if IS_ENABLED(CONFIG_INPUT_ADXL34X_I2C) { I2C_BOARD_INFO("adxl34x", 0x53), .irq = IRQ_PG3, .platform_data = (void *)&adxl34x_info, }, #endif -#if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE) +#if IS_ENABLED(CONFIG_GPIO_ADP5588) { I2C_BOARD_INFO("adp5588-gpio", 0x34), .platform_data = (void *)&adp5588_gpio_data, }, #endif -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_7393) { I2C_BOARD_INFO("bfin-adv7393", 0x2B), }, #endif -#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) +#if IS_ENABLED(CONFIG_FB_BF537_LQ035) { I2C_BOARD_INFO("bf537-lq035-ad5280", 0x2F), }, #endif -#if defined(CONFIG_BACKLIGHT_ADP8870) || defined(CONFIG_BACKLIGHT_ADP8870_MODULE) +#if IS_ENABLED(CONFIG_BACKLIGHT_ADP8870) { I2C_BOARD_INFO("adp8870", 0x2B), .platform_data = (void *)&adp8870_pdata, }, #endif -#if defined(CONFIG_SND_SOC_ADAU1371) || defined(CONFIG_SND_SOC_ADAU1371_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_ADAU1371) { I2C_BOARD_INFO("adau1371", 0x1A), }, #endif -#if defined(CONFIG_SND_SOC_ADAU1761) || defined(CONFIG_SND_SOC_ADAU1761_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_ADAU1761) { I2C_BOARD_INFO("adau1761", 0x38), }, #endif -#if defined(CONFIG_SND_SOC_ADAU1361) || defined(CONFIG_SND_SOC_ADAU1361_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_ADAU1361) { I2C_BOARD_INFO("adau1361", 0x38), }, #endif -#if defined(CONFIG_SND_SOC_ADAU1701) || defined(CONFIG_SND_SOC_ADAU1701_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_ADAU1701) { I2C_BOARD_INFO("adau1701", 0x34), }, #endif -#if defined(CONFIG_AD525X_DPOT) || defined(CONFIG_AD525X_DPOT_MODULE) +#if IS_ENABLED(CONFIG_AD525X_DPOT) { I2C_BOARD_INFO("ad5258", 0x18), }, #endif -#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_SSM2602) { I2C_BOARD_INFO("ssm2602", 0x1b), }, #endif -#if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE) +#if IS_ENABLED(CONFIG_REGULATOR_AD5398) { I2C_BOARD_INFO("ad5398", 0xC), .platform_data = (void *)&ad5398_regulator_data, }, #endif -#if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE) +#if IS_ENABLED(CONFIG_BACKLIGHT_ADP8860) { I2C_BOARD_INFO("adp8860", 0x2A), .platform_data = (void *)&adp8860_pdata, }, #endif -#if defined(CONFIG_SND_SOC_ADAU1373) || defined(CONFIG_SND_SOC_ADAU1373_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_ADAU1373) { I2C_BOARD_INFO("adau1373", 0x1A), }, #endif -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("ad5252", 0x2e), }, #endif }; - -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) \ +|| IS_ENABLED(CONFIG_BFIN_SPORT) +unsigned short bfin_sport0_peripherals[] = { + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 +}; +#endif +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -2382,11 +2366,6 @@ static struct resource bfin_sport0_uart_resources[] = { }, }; -static unsigned short bfin_sport0_peripherals[] = { - P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, - P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0 -}; - static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", .id = 0, @@ -2432,8 +2411,50 @@ static struct platform_device bfin_sport1_uart_device = { }; #endif #endif - -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SPORT) +static struct resource bfin_sport0_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_TX, + .end = IRQ_SPORT0_TX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_SPORT0_TX, + .end = CH_SPORT0_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_SPORT0_RX, + .end = CH_SPORT0_RX, + .flags = IORESOURCE_DMA, + }, +}; +static struct platform_device bfin_sport0_device = { + .name = "bfin_sport_raw", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_resources), + .resource = bfin_sport0_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif +#if IS_ENABLED(CONFIG_PATA_PLATFORM) #define CF_IDE_NAND_CARD_USE_HDD_INTERFACE /* #define CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE */ @@ -2520,9 +2541,8 @@ static struct platform_device bfin_dpmc = { }, }; -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \ - defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) || \ - defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) || \ + IS_ENABLED(CONFIG_SND_BF5XX_AC97) #define SPORT_REQ(x) \ [x] = {P_SPORT##x##_TFS, P_SPORT##x##_DTPRI, P_SPORT##x##_TSCLK, \ @@ -2572,43 +2592,63 @@ static struct resource bfin_snd_resources[][4] = { }; #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) static struct platform_device bfin_i2s_pcm = { .name = "bfin-i2s-pcm-audio", .id = -1, }; #endif -#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) -static struct platform_device bfin_tdm_pcm = { - .name = "bfin-tdm-pcm-audio", +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) +static struct platform_device bfin_ac97_pcm = { + .name = "bfin-ac97-pcm-audio", .id = -1, }; #endif -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) -static struct platform_device bfin_ac97_pcm = { - .name = "bfin-ac97-pcm-audio", +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) +static const char * const ad1836_link[] = { + "bfin-i2s.0", + "spi0.4", +}; +static struct platform_device bfin_ad1836_machine = { + .name = "bfin-snd-ad1836", .id = -1, + .dev = { + .platform_data = (void *)ad1836_link, + }, +}; +#endif + +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311) +static const unsigned ad73311_gpio[] = { + GPIO_PF4, +}; + +static struct platform_device bfin_ad73311_machine = { + .name = "bfin-snd-ad73311", + .id = 1, + .dev = { + .platform_data = (void *)ad73311_gpio, + }, }; #endif -#if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_AD73311) static struct platform_device bfin_ad73311_codec_device = { .name = "ad73311", .id = -1, }; #endif -#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) || \ - defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) static struct platform_device bfin_eval_adav801_device = { .name = "bfin-eval-adav801", .id = -1, }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_I2S) || defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S) static struct platform_device bfin_i2s = { .name = "bfin-i2s", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -2620,19 +2660,7 @@ static struct platform_device bfin_i2s = { }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_TDM) || defined(CONFIG_SND_BF5XX_SOC_TDM_MODULE) -static struct platform_device bfin_tdm = { - .name = "bfin-tdm", - .id = CONFIG_SND_BF5XX_SPORT_NUM, - .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]), - .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM], - .dev = { - .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM], - }, -}; -#endif - -#if defined(CONFIG_SND_BF5XX_SOC_AC97) || defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97) static struct platform_device bfin_ac97 = { .name = "bfin-ac97", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -2644,7 +2672,7 @@ static struct platform_device bfin_ac97 = { }; #endif -#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE) +#if IS_ENABLED(CONFIG_REGULATOR_FIXED_VOLTAGE) #define REGULATOR_ADP122 "adp122" #define REGULATOR_ADP122_UV 2500000 @@ -2682,8 +2710,7 @@ static struct platform_device adp_switch_device = { }, }; -#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \ - defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE) +#if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER) static struct regulator_bulk_data adp122_bulk_data = { .supply = REGULATOR_ADP122, }; @@ -2704,8 +2731,7 @@ static struct platform_device adp122_userspace_consumer_device = { #endif #endif -#if defined(CONFIG_IIO_GPIO_TRIGGER) || \ - defined(CONFIG_IIO_GPIO_TRIGGER_MODULE) +#if IS_ENABLED(CONFIG_IIO_GPIO_TRIGGER) static struct resource iio_gpio_trigger_resources[] = { [0] = { @@ -2722,15 +2748,13 @@ static struct platform_device iio_gpio_trigger = { }; #endif -#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) || \ - defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) static struct platform_device bf5xx_adau1373_device = { .name = "bfin-eval-adau1373", }; #endif -#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) || \ - defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) static struct platform_device bf5xx_adau1701_device = { .name = "bfin-eval-adau1701", }; @@ -2739,71 +2763,72 @@ static struct platform_device bf5xx_adau1701_device = { static struct platform_device *stamp_devices[] __initdata = { &bfin_dpmc, - -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SPORT) + &bfin_sport0_device, +#endif +#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) &bfin_pcmcia_cf_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_SL811_HCD) &sl811_hcd_device, #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) &isp1362_hcd_device, #endif -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) &bfin_isp1760_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +#if IS_ENABLED(CONFIG_DM9000) &dm9000_device, #endif -#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) +#if IS_ENABLED(CONFIG_CAN_BFIN) &bfin_can_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN_SPORT) &bfin_sport_spi0_device, &bfin_sport_spi1_device, #endif -#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) +#if IS_ENABLED(CONFIG_FB_BF537_LQ035) &bfin_fb_device, #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) &bfin_lq035q1_device, #endif -#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \ - || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE) &bfin_capture_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -2812,7 +2837,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -2821,11 +2846,11 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -2834,93 +2859,86 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) &bfin_pata_device, #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM) &bfin_async_nand_device, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &stamp_flash_device, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) &bfin_i2s_pcm, #endif -#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) - &bfin_tdm_pcm, +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) + &bfin_ac97_pcm, #endif -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) - &bfin_ac97_pcm, +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) + &bfin_ad1836_machine, #endif -#if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE) - &bfin_ad73311_codec_device, +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311) + &bfin_ad73311_machine, #endif -#if defined(CONFIG_SND_BF5XX_SOC_I2S) || defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE) - &bfin_i2s, +#if IS_ENABLED(CONFIG_SND_SOC_AD73311) + &bfin_ad73311_codec_device, #endif -#if defined(CONFIG_SND_BF5XX_SOC_TDM) || defined(CONFIG_SND_BF5XX_SOC_TDM_MODULE) - &bfin_tdm, +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S) + &bfin_i2s, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AC97) || defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97) &bfin_ac97, #endif -#if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE) -#if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \ - defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE) +#if IS_ENABLED(CONFIG_REGULATOR_AD5398) +#if IS_ENABLED(CONFIG_REGULATOR_VIRTUAL_CONSUMER) &ad5398_virt_consumer_device, #endif -#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \ - defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE) +#if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER) &ad5398_userspace_consumer_device, #endif #endif -#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE) +#if IS_ENABLED(CONFIG_REGULATOR_FIXED_VOLTAGE) &adp_switch_device, -#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \ - defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE) +#if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER) &adp122_userspace_consumer_device, #endif #endif -#if defined(CONFIG_IIO_GPIO_TRIGGER) || \ - defined(CONFIG_IIO_GPIO_TRIGGER_MODULE) +#if IS_ENABLED(CONFIG_IIO_GPIO_TRIGGER) &iio_gpio_trigger, #endif -#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) || \ - defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) &bf5xx_adau1373_device, #endif -#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) || \ - defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) &bf5xx_adau1701_device, #endif -#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) || \ - defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) &bfin_eval_adav801_device, #endif }; static int __init net2272_init(void) { -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) int ret; ret = gpio_request(GPIO_PF6, "net2272"); @@ -2993,9 +3011,10 @@ void native_machine_restart(char *cmd) * Currently the MAC address is saved in Flash by U-Boot */ #define FLASH_MAC 0x203f0000 -void bfin_get_ether_addr(char *addr) +int bfin_get_ether_addr(char *addr) { *(u32 *)(&(addr[0])) = bfin_read32(FLASH_MAC); *(u16 *)(&(addr[4])) = bfin_read16(FLASH_MAC + 4); + return 0; } EXPORT_SYMBOL(bfin_get_ether_addr); diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c index 988517671a5..6b988ad653d 100644 --- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c @@ -16,11 +16,12 @@ #include <linux/mtd/physmap.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) #include <linux/usb/isp1362.h> #endif #include <linux/ata_platform.h> #include <linux/irq.h> +#include <linux/gpio.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <asm/portmux.h> @@ -32,10 +33,10 @@ */ const char bfin_board_name[] = "Bluetechnix TCM BF537"; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* all SPI peripherals info goes here */ -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -66,14 +67,14 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -86,7 +87,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -95,7 +96,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ @@ -144,20 +145,20 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) +#if IS_ENABLED(CONFIG_FB_HITACHI_TX09) static struct platform_device hitachi_fb_device = { .name = "hitachi-tx09", }; #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -189,7 +190,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) static struct resource isp1362_hcd_resources[] = { { .start = 0x20308000, @@ -228,7 +229,7 @@ static struct platform_device isp1362_hcd_device = { }; #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x20300000, @@ -249,7 +250,7 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) +#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR) static struct mtd_partition cm_partitions[] = { { .name = "bootloader(nor)", @@ -298,7 +299,7 @@ static struct platform_device cm_flash_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -397,7 +398,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -452,7 +453,9 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) +static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; + static struct resource bfin_twi0_resource[] = { [0] = { .start = TWI0_REGBASE, @@ -471,10 +474,13 @@ static struct platform_device i2c_bfin_twi_device = { .id = 0, .num_resources = ARRAY_SIZE(bfin_twi0_resource), .resource = bfin_twi0_resource, + .dev = { + .platform_data = &bfin_twi0_pins, + }, }; #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -545,7 +551,7 @@ static struct platform_device bfin_sport1_uart_device = { #endif #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_MII0; @@ -578,7 +584,7 @@ static struct platform_device bfin_mac_device = { }; #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) #define PATA_INT IRQ_PF14 static struct pata_platform_info bfin_pata_platform_data = { @@ -646,15 +652,15 @@ static struct platform_device *cm_bf537_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) +#if IS_ENABLED(CONFIG_FB_HITACHI_TX09) &hitachi_fb_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -663,7 +669,7 @@ static struct platform_device *cm_bf537_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -672,11 +678,11 @@ static struct platform_device *cm_bf537_devices[] __initdata = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -685,39 +691,39 @@ static struct platform_device *cm_bf537_devices[] __initdata = { #endif #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) &isp1362_hcd_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) &bfin_pata_device, #endif -#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) +#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR) &cm_flash_device, #endif }; static int __init net2272_init(void) { -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) int ret; ret = gpio_request(GPIO_PG14, "net2272"); @@ -737,11 +743,11 @@ static int __init tcm_bf537_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices)); -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN); #endif @@ -780,9 +786,8 @@ void __init native_machine_early_platform_add_devices(void) ARRAY_SIZE(cm_bf537_early_devices)); } -void bfin_get_ether_addr(char *addr) +int bfin_get_ether_addr(char *addr) { - random_ether_addr(addr); - printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__); + return 1; } EXPORT_SYMBOL(bfin_get_ether_addr); diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h index 543cd3fb305..2bc70c5b941 100644 --- a/arch/blackfin/mach-bf537/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h @@ -6,8 +6,7 @@ * DO NOT EDIT THIS FILE * * Copyright 2004-2011 Analog Devices Inc. - * Licensed under the ADI BSD license. - * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd + * Licensed under the Clear BSD license. */ /* This file should be up to date with: @@ -237,5 +236,6 @@ #define ANOMALY_05000467 (0) #define ANOMALY_05000474 (0) #define ANOMALY_05000485 (0) +#define ANOMALY_16000030 (0) #endif diff --git a/arch/blackfin/mach-bf537/include/mach/defBF534.h b/arch/blackfin/mach-bf537/include/mach/defBF534.h index 4a031dde173..ef6a98cdfd4 100644 --- a/arch/blackfin/mach-bf537/include/mach/defBF534.h +++ b/arch/blackfin/mach-bf537/include/mach/defBF534.h @@ -1,7 +1,7 @@ /* * Copyright 2005-2010 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) */ #ifndef _DEF_BF534_H @@ -1403,75 +1403,6 @@ #define ERR_DET 0x4000 /* Error Detected Indicator */ #define ERR_NCOR 0x8000 /* Error Not Corrected Indicator */ -/* ******************** TWO-WIRE INTERFACE (TWI) MASKS ***********************/ -/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y); ) */ -#define CLKLOW(x) ((x) & 0xFF) /* Periods Clock Is Held Low */ -#define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */ - -/* TWI_PRESCALE Masks */ -#define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */ -#define TWI_ENA 0x0080 /* TWI Enable */ -#define SCCB 0x0200 /* SCCB Compatibility Enable */ - -/* TWI_SLAVE_CTL Masks */ -#define SEN 0x0001 /* Slave Enable */ -#define SADD_LEN 0x0002 /* Slave Address Length */ -#define STDVAL 0x0004 /* Slave Transmit Data Valid */ -#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */ -#define GEN 0x0010 /* General Call Address Matching Enabled */ - -/* TWI_SLAVE_STAT Masks */ -#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */ -#define GCALL 0x0002 /* General Call Indicator */ - -/* TWI_MASTER_CTL Masks */ -#define MEN 0x0001 /* Master Mode Enable */ -#define MADD_LEN 0x0002 /* Master Address Length */ -#define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */ -#define FAST 0x0008 /* Use Fast Mode Timing Specs */ -#define STOP 0x0010 /* Issue Stop Condition */ -#define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */ -#define DCNT 0x3FC0 /* Data Bytes To Transfer */ -#define SDAOVR 0x4000 /* Serial Data Override */ -#define SCLOVR 0x8000 /* Serial Clock Override */ - -/* TWI_MASTER_STAT Masks */ -#define MPROG 0x0001 /* Master Transfer In Progress */ -#define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */ -#define ANAK 0x0004 /* Address Not Acknowledged */ -#define DNAK 0x0008 /* Data Not Acknowledged */ -#define BUFRDERR 0x0010 /* Buffer Read Error */ -#define BUFWRERR 0x0020 /* Buffer Write Error */ -#define SDASEN 0x0040 /* Serial Data Sense */ -#define SCLSEN 0x0080 /* Serial Clock Sense */ -#define BUSBUSY 0x0100 /* Bus Busy Indicator */ - -/* TWI_INT_SRC and TWI_INT_ENABLE Masks */ -#define SINIT 0x0001 /* Slave Transfer Initiated */ -#define SCOMP 0x0002 /* Slave Transfer Complete */ -#define SERR 0x0004 /* Slave Transfer Error */ -#define SOVF 0x0008 /* Slave Overflow */ -#define MCOMP 0x0010 /* Master Transfer Complete */ -#define MERR 0x0020 /* Master Transfer Error */ -#define XMTSERV 0x0040 /* Transmit FIFO Service */ -#define RCVSERV 0x0080 /* Receive FIFO Service */ - -/* TWI_FIFO_CTRL Masks */ -#define XMTFLUSH 0x0001 /* Transmit Buffer Flush */ -#define RCVFLUSH 0x0002 /* Receive Buffer Flush */ -#define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */ -#define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */ - -/* TWI_FIFO_STAT Masks */ -#define XMTSTAT 0x0003 /* Transmit FIFO Status */ -#define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */ -#define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */ -#define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */ - -#define RCVSTAT 0x000C /* Receive FIFO Status */ -#define RCV_EMPTY 0x0000 /* Receive FIFO Empty */ -#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */ -#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */ /* ******************* PIN CONTROL REGISTER MASKS ************************/ /* PORT_MUX Masks */ diff --git a/arch/blackfin/mach-bf537/include/mach/defBF537.h b/arch/blackfin/mach-bf537/include/mach/defBF537.h index 3d471d75268..e10332c9f66 100644 --- a/arch/blackfin/mach-bf537/include/mach/defBF537.h +++ b/arch/blackfin/mach-bf537/include/mach/defBF537.h @@ -1,7 +1,7 @@ /* * Copyright 2005-2010 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) */ #ifndef _DEF_BF537_H diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c index 1633a6f306c..ae2fcbb0011 100644 --- a/arch/blackfin/mach-bf538/boards/ezkit.c +++ b/arch/blackfin/mach-bf538/boards/ezkit.c @@ -33,14 +33,14 @@ const char bfin_board_name[] = "ADI BF538-EZKIT"; */ -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; -#endif +#endif /* CONFIG_RTC_DRV_BFIN */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -100,7 +100,7 @@ static struct platform_device bfin_uart0_device = { .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ }, }; -#endif +#endif /* CONFIG_SERIAL_BFIN_UART0 */ #ifdef CONFIG_SERIAL_BFIN_UART1 static struct resource bfin_uart1_resources[] = { { @@ -148,7 +148,7 @@ static struct platform_device bfin_uart1_device = { .platform_data = &bfin_uart1_peripherals, /* Passed to driver */ }, }; -#endif +#endif /* CONFIG_SERIAL_BFIN_UART1 */ #ifdef CONFIG_SERIAL_BFIN_UART2 static struct resource bfin_uart2_resources[] = { { @@ -196,10 +196,10 @@ static struct platform_device bfin_uart2_device = { .platform_data = &bfin_uart2_peripherals, /* Passed to driver */ }, }; -#endif -#endif +#endif /* CONFIG_SERIAL_BFIN_UART2 */ +#endif /* CONFIG_SERIAL_BFIN */ -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -224,7 +224,7 @@ static struct platform_device bfin_sir0_device = { .num_resources = ARRAY_SIZE(bfin_sir0_resources), .resource = bfin_sir0_resources, }; -#endif +#endif /* CONFIG_BFIN_SIR0 */ #ifdef CONFIG_BFIN_SIR1 static struct resource bfin_sir1_resources[] = { { @@ -249,7 +249,7 @@ static struct platform_device bfin_sir1_device = { .num_resources = ARRAY_SIZE(bfin_sir1_resources), .resource = bfin_sir1_resources, }; -#endif +#endif /* CONFIG_BFIN_SIR1 */ #ifdef CONFIG_BFIN_SIR2 static struct resource bfin_sir2_resources[] = { { @@ -274,10 +274,10 @@ static struct platform_device bfin_sir2_device = { .num_resources = ARRAY_SIZE(bfin_sir2_resources), .resource = bfin_sir2_resources, }; -#endif -#endif +#endif /* CONFIG_BFIN_SIR2 */ +#endif /* CONFIG_BFIN_SIR */ -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -311,7 +311,7 @@ static struct platform_device bfin_sport0_uart_device = { .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ }, }; -#endif +#endif /* CONFIG_SERIAL_BFIN_SPORT0_UART */ #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART static struct resource bfin_sport1_uart_resources[] = { { @@ -345,7 +345,7 @@ static struct platform_device bfin_sport1_uart_device = { .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ }, }; -#endif +#endif /* CONFIG_SERIAL_BFIN_SPORT1_UART */ #ifdef CONFIG_SERIAL_BFIN_SPORT2_UART static struct resource bfin_sport2_uart_resources[] = { { @@ -379,7 +379,7 @@ static struct platform_device bfin_sport2_uart_device = { .platform_data = &bfin_sport2_peripherals, /* Passed to driver */ }, }; -#endif +#endif /* CONFIG_SERIAL_BFIN_SPORT2_UART */ #ifdef CONFIG_SERIAL_BFIN_SPORT3_UART static struct resource bfin_sport3_uart_resources[] = { { @@ -413,10 +413,10 @@ static struct platform_device bfin_sport3_uart_device = { .platform_data = &bfin_sport3_peripherals, /* Passed to driver */ }, }; -#endif -#endif +#endif /* CONFIG_SERIAL_BFIN_SPORT3_UART */ +#endif /* CONFIG_SERIAL_BFIN_SPORT */ -#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) +#if IS_ENABLED(CONFIG_CAN_BFIN) static unsigned short bfin_can_peripherals[] = { P_CAN0_RX, P_CAN0_TX, 0 }; @@ -452,13 +452,13 @@ static struct platform_device bfin_can_device = { .platform_data = &bfin_can_peripherals, /* Passed to driver */ }, }; -#endif +#endif /* CONFIG_CAN_BFIN */ /* * USB-LAN EzExtender board * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -488,12 +488,11 @@ static struct platform_device smc91x_device = { .platform_data = &smc91x_info, }, }; -#endif +#endif /* CONFIG_SMC91X */ -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* all SPI peripherals info goes here */ -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) /* SPI flash chip (m25p16) */ static struct mtd_partition bfin_spi_flash_partitions[] = { { @@ -518,9 +517,10 @@ static struct flash_platform_data bfin_spi_flash_data = { static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ }; -#endif +#endif /* CONFIG_MTD_M25P80 */ +#endif /* CONFIG_SPI_BFIN5XX */ -#if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879) #include <linux/spi/ad7879.h> static const struct ad7879_platform_data bfin_ad7879_ts_info = { .model = 7879, /* Model = AD7879 */ @@ -535,9 +535,9 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = { .gpio_export = 1, /* Export GPIO to gpiolib */ .gpio_base = -1, /* Dynamic allocation */ }; -#endif +#endif /* CONFIG_TOUCHSCREEN_AD7879 */ -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) #include <asm/bfin-lq035q1.h> static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = { @@ -564,11 +564,10 @@ static struct platform_device bfin_lq035q1_device = { .platform_data = &bfin_lq035q1_data, }, }; -#endif +#endif /* CONFIG_FB_BFIN_LQ035Q1 */ static struct spi_board_info bf538_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -579,8 +578,8 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = { .controller_data = &spi_flash_chip_info, .mode = SPI_MODE_3, }, -#endif -#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) +#endif /* CONFIG_MTD_M25P80 */ +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI) { .modalias = "ad7879", .platform_data = &bfin_ad7879_ts_info, @@ -590,8 +589,8 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = { .chip_select = 1, .mode = SPI_CPHA | SPI_CPOL, }, -#endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#endif /* CONFIG_TOUCHSCREEN_AD7879_SPI */ +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) { .modalias = "bfin-lq035q1-spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -599,15 +598,15 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = { .chip_select = 2, .mode = SPI_CPHA | SPI_CPOL, }, -#endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#endif /* CONFIG_FB_BFIN_LQ035Q1 */ +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 1, }, -#endif +#endif /* CONFIG_SPI_SPIDEV */ }; /* SPI (0) */ @@ -716,9 +715,9 @@ static struct platform_device bf538_spi_master2 = { }, }; -#endif /* spi master and devices */ +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) +static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) static struct resource bfin_twi0_resource[] = { [0] = { .start = TWI0_REGBASE, @@ -737,9 +736,13 @@ static struct platform_device i2c_bfin_twi0_device = { .id = 0, .num_resources = ARRAY_SIZE(bfin_twi0_resource), .resource = bfin_twi0_resource, + .dev = { + .platform_data = &bfin_twi0_pins, + }, }; -#if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */ +static const u16 bfin_twi1_pins[] = {P_TWI1_SCL, P_TWI1_SDA, 0}; + static struct resource bfin_twi1_resource[] = { [0] = { .start = TWI1_REGBASE, @@ -759,10 +762,9 @@ static struct platform_device i2c_bfin_twi1_device = { .num_resources = ARRAY_SIZE(bfin_twi1_resource), .resource = bfin_twi1_resource, }; -#endif -#endif +#endif /* CONFIG_I2C_BLACKFIN_TWI */ -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/gpio_keys.h> static struct gpio_keys_button bfin_gpio_keys_table[] = { @@ -810,7 +812,7 @@ static struct platform_device bfin_dpmc = { }, }; -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition ezkit_partitions[] = { { .name = "bootloader(nor)", @@ -835,7 +837,7 @@ static struct physmap_flash_data ezkit_flash_data = { static struct resource ezkit_flash_resource = { .start = 0x20000000, -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) .end = 0x202fffff, #else .end = 0x203fffff, @@ -858,11 +860,11 @@ static struct platform_device *cm_bf538_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -874,18 +876,18 @@ static struct platform_device *cm_bf538_devices[] __initdata = { #endif #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bf538_spi_master0, &bf538_spi_master1, &bf538_spi_master2, #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi0_device, &i2c_bfin_twi1_device, #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -897,7 +899,7 @@ static struct platform_device *cm_bf538_devices[] __initdata = { #endif #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -912,23 +914,23 @@ static struct platform_device *cm_bf538_devices[] __initdata = { #endif #endif -#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) +#if IS_ENABLED(CONFIG_CAN_BFIN) &bfin_can_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) &bfin_lq035q1_device, #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &ezkit_flash_device, #endif }; @@ -938,7 +940,7 @@ static int __init ezkit_init(void) printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf538_devices, ARRAY_SIZE(cm_bf538_devices)); -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) spi_register_board_info(bf538_spi_board_info, ARRAY_SIZE(bf538_spi_board_info)); #endif diff --git a/arch/blackfin/mach-bf538/include/mach/anomaly.h b/arch/blackfin/mach-bf538/include/mach/anomaly.h index b6ca9978871..eaac26973f6 100644 --- a/arch/blackfin/mach-bf538/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf538/include/mach/anomaly.h @@ -6,8 +6,7 @@ * DO NOT EDIT THIS FILE * * Copyright 2004-2011 Analog Devices Inc. - * Licensed under the ADI BSD license. - * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd + * Licensed under the Clear BSD license. */ /* This file should be up to date with: @@ -211,5 +210,6 @@ #define ANOMALY_05000474 (0) #define ANOMALY_05000480 (0) #define ANOMALY_05000485 (0) +#define ANOMALY_16000030 (0) #endif diff --git a/arch/blackfin/mach-bf538/include/mach/defBF538.h b/arch/blackfin/mach-bf538/include/mach/defBF538.h index d27f81d6c4b..876a7702800 100644 --- a/arch/blackfin/mach-bf538/include/mach/defBF538.h +++ b/arch/blackfin/mach-bf538/include/mach/defBF538.h @@ -1,7 +1,7 @@ /* * Copyright 2008-2010 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) */ #ifndef _DEF_BF538_H @@ -1746,80 +1746,4 @@ #define SDEASE 0x00000010 /* SDRAM EAB sticky error status - W1C */ #define BGSTAT 0x00000020 /* Bus granted */ - -/* ******************** TWO-WIRE INTERFACE (TWIx) MASKS ***********************/ -/* TWIx_CLKDIV Macros (Use: *pTWIx_CLKDIV = CLKLOW(x)|CLKHI(y); ) */ -#ifdef _MISRA_RULES -#define CLKLOW(x) ((x) & 0xFFu) /* Periods Clock Is Held Low */ -#define CLKHI(y) (((y)&0xFFu)<<0x8) /* Periods Before New Clock Low */ -#else -#define CLKLOW(x) ((x) & 0xFF) /* Periods Clock Is Held Low */ -#define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */ -#endif /* _MISRA_RULES */ - -/* TWIx_PRESCALE Masks */ -#define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */ -#define TWI_ENA 0x0080 /* TWI Enable */ -#define SCCB 0x0200 /* SCCB Compatibility Enable */ - -/* TWIx_SLAVE_CTRL Masks */ -#define SEN 0x0001 /* Slave Enable */ -#define SADD_LEN 0x0002 /* Slave Address Length */ -#define STDVAL 0x0004 /* Slave Transmit Data Valid */ -#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */ -#define GEN 0x0010 /* General Call Adrress Matching Enabled */ - -/* TWIx_SLAVE_STAT Masks */ -#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */ -#define GCALL 0x0002 /* General Call Indicator */ - -/* TWIx_MASTER_CTRL Masks */ -#define MEN 0x0001 /* Master Mode Enable */ -#define MADD_LEN 0x0002 /* Master Address Length */ -#define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */ -#define FAST 0x0008 /* Use Fast Mode Timing Specs */ -#define STOP 0x0010 /* Issue Stop Condition */ -#define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */ -#define DCNT 0x3FC0 /* Data Bytes To Transfer */ -#define SDAOVR 0x4000 /* Serial Data Override */ -#define SCLOVR 0x8000 /* Serial Clock Override */ - -/* TWIx_MASTER_STAT Masks */ -#define MPROG 0x0001 /* Master Transfer In Progress */ -#define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */ -#define ANAK 0x0004 /* Address Not Acknowledged */ -#define DNAK 0x0008 /* Data Not Acknowledged */ -#define BUFRDERR 0x0010 /* Buffer Read Error */ -#define BUFWRERR 0x0020 /* Buffer Write Error */ -#define SDASEN 0x0040 /* Serial Data Sense */ -#define SCLSEN 0x0080 /* Serial Clock Sense */ -#define BUSBUSY 0x0100 /* Bus Busy Indicator */ - -/* TWIx_INT_SRC and TWIx_INT_ENABLE Masks */ -#define SINIT 0x0001 /* Slave Transfer Initiated */ -#define SCOMP 0x0002 /* Slave Transfer Complete */ -#define SERR 0x0004 /* Slave Transfer Error */ -#define SOVF 0x0008 /* Slave Overflow */ -#define MCOMP 0x0010 /* Master Transfer Complete */ -#define MERR 0x0020 /* Master Transfer Error */ -#define XMTSERV 0x0040 /* Transmit FIFO Service */ -#define RCVSERV 0x0080 /* Receive FIFO Service */ - -/* TWIx_FIFO_CTL Masks */ -#define XMTFLUSH 0x0001 /* Transmit Buffer Flush */ -#define RCVFLUSH 0x0002 /* Receive Buffer Flush */ -#define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */ -#define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */ - -/* TWIx_FIFO_STAT Masks */ -#define XMTSTAT 0x0003 /* Transmit FIFO Status */ -#define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */ -#define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */ -#define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */ - -#define RCVSTAT 0x000C /* Receive FIFO Status */ -#define RCV_EMPTY 0x0000 /* Receive FIFO Empty */ -#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */ -#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */ - #endif diff --git a/arch/blackfin/mach-bf538/include/mach/defBF539.h b/arch/blackfin/mach-bf538/include/mach/defBF539.h index 8100bcd01a0..199e871634b 100644 --- a/arch/blackfin/mach-bf538/include/mach/defBF539.h +++ b/arch/blackfin/mach-bf538/include/mach/defBF539.h @@ -1,7 +1,7 @@ /* * Copyright 2008-2010 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) */ #ifndef _DEF_BF539_H diff --git a/arch/blackfin/mach-bf548/Kconfig b/arch/blackfin/mach-bf548/Kconfig index 94acb586832..334ec7b1218 100644 --- a/arch/blackfin/mach-bf548/Kconfig +++ b/arch/blackfin/mach-bf548/Kconfig @@ -377,40 +377,6 @@ config IRQ_PINT3 endmenu -comment "Pin Interrupt to Port Assignment" -menu "Assignment" - -config PINTx_REASSIGN - bool "Reprogram PINT Assignment" - default y - help - The interrupt assignment registers controls the pin-to-interrupt - assignment in a byte-wide manner. Each option allows you to select - a set of pins (High/Low Byte) of an specific Port being mapped - to one of the four PIN Interrupts IRQ_PINTx. - - You shouldn't change any of these unless you know exactly what you're doing. - Please consult the Blackfin BF54x Processor Hardware Reference Manual. - -config PINT0_ASSIGN - hex "PINT0_ASSIGN" - depends on PINTx_REASSIGN - default 0x00000101 -config PINT1_ASSIGN - hex "PINT1_ASSIGN" - depends on PINTx_REASSIGN - default 0x01010000 -config PINT2_ASSIGN - hex "PINT2_ASSIGN" - depends on PINTx_REASSIGN - default 0x07000101 -config PINT3_ASSIGN - hex "PINT3_ASSIGN" - depends on PINTx_REASSIGN - default 0x02020303 - -endmenu - endmenu endif diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c index 68af594db48..6d5ffdead06 100644 --- a/arch/blackfin/mach-bf548/boards/cm_bf548.c +++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c @@ -37,7 +37,7 @@ const char bfin_board_name[] = "Bluetechnix CM-BF548"; * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) +#if IS_ENABLED(CONFIG_FB_BF54X_LQ043) #include <mach/bf54x-lq043.h> @@ -69,7 +69,7 @@ static struct platform_device bf54x_lq043_device = { }; #endif -#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_BFIN) static unsigned int bf548_keymap[] = { KEYVAL(0, 0, KEY_ENTER), KEYVAL(0, 1, KEY_HELP), @@ -119,14 +119,14 @@ static struct platform_device bf54x_kpad_device = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -353,7 +353,7 @@ static struct platform_device bfin_uart3_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -456,7 +456,7 @@ static struct platform_device bfin_sir3_device = { #endif #endif -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#if IS_ENABLED(CONFIG_SMSC911X) #include <linux/smsc911x.h> static struct resource smsc911x_resources[] = { @@ -491,7 +491,7 @@ static struct platform_device smsc911x_device = { }; #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) static struct resource musb_resources[] = { [0] = { .start = 0xFFC03C00, @@ -553,7 +553,7 @@ static struct platform_device musb_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -692,7 +692,7 @@ static struct platform_device bfin_sport3_uart_device = { #endif #endif -#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) +#if IS_ENABLED(CONFIG_PATA_BF54X) static struct resource bfin_atapi_resources[] = { { .start = 0xFFC03800, @@ -714,7 +714,7 @@ static struct platform_device bfin_atapi_device = { }; #endif -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) static struct mtd_partition partition_info[] = { { .name = "linux kernel(nand)", @@ -760,7 +760,7 @@ static struct platform_device bf5xx_nand_device = { }; #endif -#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SDH_BFIN) static struct bfin_sd_host bfin_sdh_data = { .dma_chan = CH_SDH, .irq_int0 = IRQ_SDH_MASK0, @@ -776,7 +776,7 @@ static struct platform_device bf54x_sdh_device = { }; #endif -#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) +#if IS_ENABLED(CONFIG_CAN_BFIN) static unsigned short bfin_can_peripherals[] = { P_CAN0_RX, P_CAN0_TX, 0 }; @@ -814,7 +814,7 @@ static struct platform_device bfin_can_device = { }; #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition para_partitions[] = { { .name = "bootloader(nor)", @@ -854,10 +854,9 @@ static struct platform_device para_flash_device = { }; #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* all SPI peripherals info goes here */ -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) /* SPI flash chip (m25p16) */ static struct mtd_partition bfin_spi_flash_partitions[] = { { @@ -884,7 +883,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -901,8 +900,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { #endif static struct spi_board_info bf54x_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -914,7 +912,7 @@ static struct spi_board_info bf54x_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, @@ -924,7 +922,7 @@ static struct spi_board_info bf54x_spi_board_info[] __initdata = { .chip_select = 2, }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -1006,7 +1004,9 @@ static struct platform_device bf54x_spi_master1 = { }; #endif /* spi master and devices */ -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) +static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; + static struct resource bfin_twi0_resource[] = { [0] = { .start = TWI0_REGBASE, @@ -1025,9 +1025,14 @@ static struct platform_device i2c_bfin_twi0_device = { .id = 0, .num_resources = ARRAY_SIZE(bfin_twi0_resource), .resource = bfin_twi0_resource, + .dev = { + .platform_data = &bfin_twi0_pins, + }, }; #if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */ +static const u16 bfin_twi1_pins[] = {P_TWI1_SCL, P_TWI1_SDA, 0}; + static struct resource bfin_twi1_resource[] = { [0] = { .start = TWI1_REGBASE, @@ -1046,11 +1051,14 @@ static struct platform_device i2c_bfin_twi1_device = { .id = 1, .num_resources = ARRAY_SIZE(bfin_twi1_resource), .resource = bfin_twi1_resource, + .dev = { + .platform_data = &bfin_twi1_pins, + }, }; #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/gpio_keys.h> static struct gpio_keys_button bfin_gpio_keys_table[] = { @@ -1102,11 +1110,11 @@ static struct platform_device *cm_bf548_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -1121,7 +1129,7 @@ static struct platform_device *cm_bf548_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -1136,19 +1144,19 @@ static struct platform_device *cm_bf548_devices[] __initdata = { #endif #endif -#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) +#if IS_ENABLED(CONFIG_FB_BF54X_LQ043) &bf54x_lq043_device, #endif -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#if IS_ENABLED(CONFIG_SMSC911X) &smsc911x_device, #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) &musb_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -1163,43 +1171,43 @@ static struct platform_device *cm_bf548_devices[] __initdata = { #endif #endif -#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) +#if IS_ENABLED(CONFIG_PATA_BF54X) &bfin_atapi_device, #endif -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) &bf5xx_nand_device, #endif -#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SDH_BFIN) &bf54x_sdh_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bf54x_spi_master0, &bf54x_spi_master1, #endif -#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_BFIN) &bf54x_kpad_device, #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi0_device, #if !defined(CONFIG_BF542) &i2c_bfin_twi1_device, #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) ¶_flash_device, #endif -#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) +#if IS_ENABLED(CONFIG_CAN_BFIN) &bfin_can_device, #endif @@ -1210,7 +1218,7 @@ static int __init cm_bf548_init(void) printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf548_devices, ARRAY_SIZE(cm_bf548_devices)); -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) spi_register_board_info(bf54x_spi_board_info, ARRAY_SIZE(bf54x_spi_board_info)); #endif diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 3ea45f8bd61..1fe7ff28661 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -17,6 +17,9 @@ #include <linux/i2c.h> #include <linux/interrupt.h> #include <linux/usb/musb.h> +#include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/platform_data/pinctrl-adi2.h> #include <asm/bfin5xx_spi.h> #include <asm/dma.h> #include <asm/gpio.h> @@ -38,7 +41,7 @@ const char bfin_board_name[] = "ADI BF548-EZKIT"; * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) #include <linux/usb/isp1760.h> static struct resource bfin_isp1760_resources[] = { [0] = { @@ -73,7 +76,7 @@ static struct platform_device bfin_isp1760_device = { }; #endif -#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) +#if IS_ENABLED(CONFIG_FB_BF54X_LQ043) #include <mach/bf54x-lq043.h> @@ -105,7 +108,7 @@ static struct platform_device bf54x_lq043_device = { }; #endif -#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_BFIN) static const unsigned int bf548_keymap[] = { KEYVAL(0, 0, KEY_ENTER), KEYVAL(0, 1, KEY_HELP), @@ -155,7 +158,7 @@ static struct platform_device bf54x_kpad_device = { }; #endif -#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) +#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY) #include <asm/bfin_rotary.h> static struct bfin_rotary_platform_data bfin_rotary_data = { @@ -165,6 +168,7 @@ static struct bfin_rotary_platform_data bfin_rotary_data = { .rotary_button_key = KEY_ENTER, .debounce = 10, /* 0..17 */ .mode = ROT_QUAD_ENC | ROT_DEBE, + .pm_wakeup = 1, }; static struct resource bfin_rotary_resources[] = { @@ -186,7 +190,7 @@ static struct platform_device bfin_rotary_device = { }; #endif -#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE) +#if IS_ENABLED(CONFIG_INPUT_ADXL34X) #include <linux/input/adxl34x.h> static const struct adxl34x_platform_data adxl34x_info = { .x_axis_offset = 0, @@ -225,14 +229,14 @@ static const struct adxl34x_platform_data adxl34x_info = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -240,6 +244,13 @@ static struct resource bfin_uart0_resources[] = { .end = UART0_RBR+2, .flags = IORESOURCE_MEM, }, +#ifdef CONFIG_EARLY_PRINTK + { + .start = PORTE_FER, + .end = PORTE_FER+2, + .flags = IORESOURCE_REG, + }, +#endif { .start = IRQ_UART0_TX, .end = IRQ_UART0_TX, @@ -288,6 +299,13 @@ static struct resource bfin_uart1_resources[] = { .end = UART1_RBR+2, .flags = IORESOURCE_MEM, }, +#ifdef CONFIG_EARLY_PRINTK + { + .start = PORTH_FER, + .end = PORTH_FER+2, + .flags = IORESOURCE_REG, + }, +#endif { .start = IRQ_UART1_TX, .end = IRQ_UART1_TX, @@ -352,6 +370,13 @@ static struct resource bfin_uart2_resources[] = { .end = UART2_RBR+2, .flags = IORESOURCE_MEM, }, +#ifdef CONFIG_EARLY_PRINTK + { + .start = PORTB_FER, + .end = PORTB_FER+2, + .flags = IORESOURCE_REG, + }, +#endif { .start = IRQ_UART2_TX, .end = IRQ_UART2_TX, @@ -400,6 +425,13 @@ static struct resource bfin_uart3_resources[] = { .end = UART3_RBR+2, .flags = IORESOURCE_MEM, }, +#ifdef CONFIG_EARLY_PRINTK + { + .start = PORTB_FER, + .end = PORTB_FER+2, + .flags = IORESOURCE_REG, + }, +#endif { .start = IRQ_UART3_TX, .end = IRQ_UART3_TX, @@ -459,7 +491,7 @@ static struct platform_device bfin_uart3_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -562,7 +594,7 @@ static struct platform_device bfin_sir3_device = { #endif #endif -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#if IS_ENABLED(CONFIG_SMSC911X) #include <linux/smsc911x.h> static struct resource smsc911x_resources[] = { @@ -597,7 +629,7 @@ static struct platform_device smsc911x_device = { }; #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) static struct resource musb_resources[] = { [0] = { .start = 0xFFC03C00, @@ -634,9 +666,9 @@ static struct musb_hdrc_config musb_config = { }; static struct musb_hdrc_platform_data musb_plat = { -#if defined(CONFIG_USB_MUSB_OTG) +#if defined(CONFIG_USB_MUSB_HDRC) && defined(CONFIG_USB_GADGET_MUSB_HDRC) .mode = MUSB_OTG, -#elif defined(CONFIG_USB_MUSB_HDRC_HCD) +#elif defined(CONFIG_USB_MUSB_HDRC) .mode = MUSB_HOST, #elif defined(CONFIG_USB_GADGET_MUSB_HDRC) .mode = MUSB_PERIPHERAL, @@ -659,7 +691,7 @@ static struct platform_device musb_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -798,7 +830,7 @@ static struct platform_device bfin_sport3_uart_device = { #endif #endif -#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) +#if IS_ENABLED(CONFIG_CAN_BFIN) static unsigned short bfin_can0_peripherals[] = { P_CAN0_RX, P_CAN0_TX, 0 @@ -876,7 +908,7 @@ static struct platform_device bfin_can1_device = { #endif -#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) +#if IS_ENABLED(CONFIG_PATA_BF54X) static struct resource bfin_atapi_resources[] = { { .start = 0xFFC03800, @@ -898,7 +930,7 @@ static struct platform_device bfin_atapi_device = { }; #endif -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) static struct mtd_partition partition_info[] = { { .name = "bootloader(nand)", @@ -948,7 +980,7 @@ static struct platform_device bf5xx_nand_device = { }; #endif -#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SDH_BFIN) static struct bfin_sd_host bfin_sdh_data = { .dma_chan = CH_SDH, @@ -965,7 +997,7 @@ static struct platform_device bf54x_sdh_device = { }; #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition ezkit_partitions[] = { { .name = "bootloader(nor)", @@ -1013,8 +1045,7 @@ static struct platform_device ezkit_flash_device = { }; #endif -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) /* SPI flash chip (m25p16) */ static struct mtd_partition bfin_spi_flash_partitions[] = { { @@ -1041,7 +1072,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -1057,60 +1088,463 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { }; #endif +#ifdef CONFIG_PINCTRL_ADI2 + +# define ADI_PINT_DEVNAME "adi-gpio-pint" +# define ADI_GPIO_DEVNAME "adi-gpio" +# define ADI_PINCTRL_DEVNAME "pinctrl-adi2" + +static struct platform_device bfin_pinctrl_device = { + .name = ADI_PINCTRL_DEVNAME, + .id = 0, +}; + +static struct resource bfin_pint0_resources[] = { + { + .start = PINT0_MASK_SET, + .end = PINT0_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT0, + .end = IRQ_PINT0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint0_device = { + .name = ADI_PINT_DEVNAME, + .id = 0, + .num_resources = ARRAY_SIZE(bfin_pint0_resources), + .resource = bfin_pint0_resources, +}; + +static struct resource bfin_pint1_resources[] = { + { + .start = PINT1_MASK_SET, + .end = PINT1_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT1, + .end = IRQ_PINT1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint1_device = { + .name = ADI_PINT_DEVNAME, + .id = 1, + .num_resources = ARRAY_SIZE(bfin_pint1_resources), + .resource = bfin_pint1_resources, +}; + +static struct resource bfin_pint2_resources[] = { + { + .start = PINT2_MASK_SET, + .end = PINT2_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT2, + .end = IRQ_PINT2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint2_device = { + .name = ADI_PINT_DEVNAME, + .id = 2, + .num_resources = ARRAY_SIZE(bfin_pint2_resources), + .resource = bfin_pint2_resources, +}; + +static struct resource bfin_pint3_resources[] = { + { + .start = PINT3_MASK_SET, + .end = PINT3_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT3, + .end = IRQ_PINT3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint3_device = { + .name = ADI_PINT_DEVNAME, + .id = 3, + .num_resources = ARRAY_SIZE(bfin_pint3_resources), + .resource = bfin_pint3_resources, +}; + +static struct resource bfin_gpa_resources[] = { + { + .start = PORTA_FER, + .end = PORTA_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { /* optional */ + .start = IRQ_PA0, + .end = IRQ_PA0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpa_pdata = { + .port_gpio_base = GPIO_PA0, /* Optional */ + .port_pin_base = GPIO_PA0, + .port_width = GPIO_BANKSIZE, + .pint_id = 0, /* PINT0 */ + .pint_assign = true, /* PINT upper 16 bit */ + .pint_map = 0, /* mapping mask in PINT */ +}; + +static struct platform_device bfin_gpa_device = { + .name = ADI_GPIO_DEVNAME, + .id = 0, + .num_resources = ARRAY_SIZE(bfin_gpa_resources), + .resource = bfin_gpa_resources, + .dev = { + .platform_data = &bfin_gpa_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpb_resources[] = { + { + .start = PORTB_FER, + .end = PORTB_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PB0, + .end = IRQ_PB0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpb_pdata = { + .port_gpio_base = GPIO_PB0, + .port_pin_base = GPIO_PB0, + .port_width = 15, + .pint_id = 0, + .pint_assign = true, + .pint_map = 1, +}; + +static struct platform_device bfin_gpb_device = { + .name = ADI_GPIO_DEVNAME, + .id = 1, + .num_resources = ARRAY_SIZE(bfin_gpb_resources), + .resource = bfin_gpb_resources, + .dev = { + .platform_data = &bfin_gpb_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpc_resources[] = { + { + .start = PORTC_FER, + .end = PORTC_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PC0, + .end = IRQ_PC0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpc_pdata = { + .port_gpio_base = GPIO_PC0, + .port_pin_base = GPIO_PC0, + .port_width = 14, + .pint_id = 2, + .pint_assign = true, + .pint_map = 0, +}; + +static struct platform_device bfin_gpc_device = { + .name = ADI_GPIO_DEVNAME, + .id = 2, + .num_resources = ARRAY_SIZE(bfin_gpc_resources), + .resource = bfin_gpc_resources, + .dev = { + .platform_data = &bfin_gpc_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpd_resources[] = { + { + .start = PORTD_FER, + .end = PORTD_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PD0, + .end = IRQ_PD0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpd_pdata = { + .port_gpio_base = GPIO_PD0, + .port_pin_base = GPIO_PD0, + .port_width = GPIO_BANKSIZE, + .pint_id = 2, + .pint_assign = false, + .pint_map = 1, +}; + +static struct platform_device bfin_gpd_device = { + .name = ADI_GPIO_DEVNAME, + .id = 3, + .num_resources = ARRAY_SIZE(bfin_gpd_resources), + .resource = bfin_gpd_resources, + .dev = { + .platform_data = &bfin_gpd_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpe_resources[] = { + { + .start = PORTE_FER, + .end = PORTE_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PE0, + .end = IRQ_PE0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpe_pdata = { + .port_gpio_base = GPIO_PE0, + .port_pin_base = GPIO_PE0, + .port_width = GPIO_BANKSIZE, + .pint_id = 3, + .pint_assign = true, + .pint_map = 2, +}; + +static struct platform_device bfin_gpe_device = { + .name = ADI_GPIO_DEVNAME, + .id = 4, + .num_resources = ARRAY_SIZE(bfin_gpe_resources), + .resource = bfin_gpe_resources, + .dev = { + .platform_data = &bfin_gpe_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpf_resources[] = { + { + .start = PORTF_FER, + .end = PORTF_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PF0, + .end = IRQ_PF0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpf_pdata = { + .port_gpio_base = GPIO_PF0, + .port_pin_base = GPIO_PF0, + .port_width = GPIO_BANKSIZE, + .pint_id = 3, + .pint_assign = false, + .pint_map = 3, +}; + +static struct platform_device bfin_gpf_device = { + .name = ADI_GPIO_DEVNAME, + .id = 5, + .num_resources = ARRAY_SIZE(bfin_gpf_resources), + .resource = bfin_gpf_resources, + .dev = { + .platform_data = &bfin_gpf_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpg_resources[] = { + { + .start = PORTG_FER, + .end = PORTG_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PG0, + .end = IRQ_PG0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpg_pdata = { + .port_gpio_base = GPIO_PG0, + .port_pin_base = GPIO_PG0, + .port_width = GPIO_BANKSIZE, + .pint_id = -1, +}; + +static struct platform_device bfin_gpg_device = { + .name = ADI_GPIO_DEVNAME, + .id = 6, + .num_resources = ARRAY_SIZE(bfin_gpg_resources), + .resource = bfin_gpg_resources, + .dev = { + .platform_data = &bfin_gpg_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gph_resources[] = { + { + .start = PORTH_FER, + .end = PORTH_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PH0, + .end = IRQ_PH0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gph_pdata = { + .port_gpio_base = GPIO_PH0, + .port_pin_base = GPIO_PH0, + .port_width = 14, + .pint_id = -1, +}; + +static struct platform_device bfin_gph_device = { + .name = ADI_GPIO_DEVNAME, + .id = 7, + .num_resources = ARRAY_SIZE(bfin_gph_resources), + .resource = bfin_gph_resources, + .dev = { + .platform_data = &bfin_gph_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpi_resources[] = { + { + .start = PORTI_FER, + .end = PORTI_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PI0, + .end = IRQ_PI0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpi_pdata = { + .port_gpio_base = GPIO_PI0, + .port_pin_base = GPIO_PI0, + .port_width = GPIO_BANKSIZE, + .pint_id = -1, +}; + +static struct platform_device bfin_gpi_device = { + .name = ADI_GPIO_DEVNAME, + .id = 8, + .num_resources = ARRAY_SIZE(bfin_gpi_resources), + .resource = bfin_gpi_resources, + .dev = { + .platform_data = &bfin_gpi_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpj_resources[] = { + { + .start = PORTJ_FER, + .end = PORTJ_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PJ0, + .end = IRQ_PJ0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpj_pdata = { + .port_gpio_base = GPIO_PJ0, + .port_pin_base = GPIO_PJ0, + .port_width = 14, + .pint_id = -1, +}; + +static struct platform_device bfin_gpj_device = { + .name = ADI_GPIO_DEVNAME, + .id = 9, + .num_resources = ARRAY_SIZE(bfin_gpj_resources), + .resource = bfin_gpj_resources, + .dev = { + .platform_data = &bfin_gpj_pdata, /* Passed to driver */ + }, +}; + +#endif + static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, /* Framework bus number */ - .chip_select = 1, /* SPI_SSEL1*/ + .chip_select = MAX_CTRL_CS + GPIO_PE4, /* SPI_SSEL1*/ .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ - || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 1, - .chip_select = 4, + .chip_select = MAX_CTRL_CS + GPIO_PG6, /* SPI_SSEL2 */ }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, .irq = IRQ_PB4, /* old boards (<=Rev 1.3) use IRQ_PJ11 */ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 2, + .chip_select = MAX_CTRL_CS + GPIO_PE5, /* SPI_SSEL2 */ }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 1, + .chip_select = MAX_CTRL_CS + GPIO_PE4, /* SPI_SSEL1 */ }, #endif -#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE) +#if IS_ENABLED(CONFIG_INPUT_ADXL34X_SPI) { .modalias = "adxl34x", .platform_data = &adxl34x_info, .irq = IRQ_PC5, .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 1, - .chip_select = 2, + .chip_select = MAX_CTRL_CS + GPIO_PG6, /* SPI_SSEL2 */ .mode = SPI_MODE_3, }, #endif }; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { [0] = { @@ -1151,7 +1585,7 @@ static struct resource bfin_spi1_resource[] = { /* SPI controller data */ static struct bfin5xx_spi_master bf54x_spi_master_info0 = { - .num_chipselect = 4, + .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, .enable_dma = 1, /* master has the ability to do dma transfer */ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, }; @@ -1167,7 +1601,7 @@ static struct platform_device bf54x_spi_master0 = { }; static struct bfin5xx_spi_master bf54x_spi_master_info1 = { - .num_chipselect = 4, + .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, .enable_dma = 1, /* master has the ability to do dma transfer */ .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0}, }; @@ -1183,8 +1617,7 @@ static struct platform_device bf54x_spi_master1 = { }; #endif /* spi master and devices */ -#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \ - || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE) #include <linux/videodev2.h> #include <media/blackfin/bfin_capture.h> #include <media/blackfin/ppi.h> @@ -1204,8 +1637,7 @@ static const struct ppi_info ppi_info = { .pin_req = ppi_req, }; -#if defined(CONFIG_VIDEO_VS6624) \ - || defined(CONFIG_VIDEO_VS6624_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_VS6624) static struct v4l2_input vs6624_inputs[] = { { .index = 0, @@ -1237,6 +1669,8 @@ static struct bfin_capture_config bfin_capture_data = { }, .ppi_info = &ppi_info, .ppi_control = (POLC | PACKEN | DLEN_8 | XFR_TYPE | 0x20), + .int_mask = 0xFFFFFFFF, /* disable error interrupt on eppi */ + .blank_clocks = 8, /* 8 clocks as SAV and EAV */ }; #endif @@ -1248,7 +1682,9 @@ static struct platform_device bfin_capture_device = { }; #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) +static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; + static struct resource bfin_twi0_resource[] = { [0] = { .start = TWI0_REGBASE, @@ -1267,9 +1703,14 @@ static struct platform_device i2c_bfin_twi0_device = { .id = 0, .num_resources = ARRAY_SIZE(bfin_twi0_resource), .resource = bfin_twi0_resource, + .dev = { + .platform_data = &bfin_twi0_pins, + }, }; #if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */ +static const u16 bfin_twi1_pins[] = {P_TWI1_SCL, P_TWI1_SDA, 0}; + static struct resource bfin_twi1_resource[] = { [0] = { .start = TWI1_REGBASE, @@ -1288,34 +1729,42 @@ static struct platform_device i2c_bfin_twi1_device = { .id = 1, .num_resources = ARRAY_SIZE(bfin_twi1_resource), .resource = bfin_twi1_resource, + .dev = { + .platform_data = &bfin_twi1_pins, + }, }; #endif #endif static struct i2c_board_info __initdata bfin_i2c_board_info0[] = { +#if IS_ENABLED(CONFIG_SND_SOC_SSM2602) + { + I2C_BOARD_INFO("ssm2602", 0x1b), + }, +#endif }; #if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */ static struct i2c_board_info __initdata bfin_i2c_board_info1[] = { -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, #endif -#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE) +#if IS_ENABLED(CONFIG_INPUT_PCF8574) { I2C_BOARD_INFO("pcf8574_keypad", 0x27), .irq = 212, }, #endif -#if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE) +#if IS_ENABLED(CONFIG_INPUT_ADXL34X_I2C) { I2C_BOARD_INFO("adxl34x", 0x53), .irq = IRQ_PC5, .platform_data = (void *)&adxl34x_info, }, #endif -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("ad5252", 0x2f), }, @@ -1323,7 +1772,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info1[] = { }; #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/gpio_keys.h> static struct gpio_keys_button bfin_gpio_keys_table[] = { @@ -1374,9 +1823,8 @@ static struct platform_device bfin_dpmc = { }, }; -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \ - defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) || \ - defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) || \ + IS_ENABLED(CONFIG_SND_BF5XX_AC97) #define SPORT_REQ(x) \ [x] = {P_SPORT##x##_TFS, P_SPORT##x##_DTPRI, P_SPORT##x##_TSCLK, \ @@ -1385,6 +1833,8 @@ static struct platform_device bfin_dpmc = { static const u16 bfin_snd_pin[][7] = { SPORT_REQ(0), SPORT_REQ(1), + SPORT_REQ(2), + SPORT_REQ(3), }; static struct bfin_snd_platform_data bfin_snd_data[] = { @@ -1394,6 +1844,12 @@ static struct bfin_snd_platform_data bfin_snd_data[] = { { .pin_req = &bfin_snd_pin[1][0], }, + { + .pin_req = &bfin_snd_pin[2][0], + }, + { + .pin_req = &bfin_snd_pin[3][0], + }, }; #define BFIN_SND_RES(x) \ @@ -1423,29 +1879,40 @@ static struct bfin_snd_platform_data bfin_snd_data[] = { static struct resource bfin_snd_resources[][4] = { BFIN_SND_RES(0), BFIN_SND_RES(1), + BFIN_SND_RES(2), + BFIN_SND_RES(3), +}; +#endif + +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) +static struct platform_device bfin_i2s_pcm = { + .name = "bfin-i2s-pcm-audio", + .id = -1, }; +#endif -static struct platform_device bfin_pcm = { - .name = "bfin-pcm-audio", +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) +static struct platform_device bfin_ac97_pcm = { + .name = "bfin-ac97-pcm-audio", .id = -1, }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311) static struct platform_device bfin_ad73311_codec_device = { .name = "ad73311", .id = -1, }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD1980) || defined(CONFIG_SND_BF5XX_SOC_AD1980_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1980) static struct platform_device bfin_ad1980_codec_device = { .name = "ad1980", .id = -1, }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_I2S) || defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S) static struct platform_device bfin_i2s = { .name = "bfin-i2s", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -1457,19 +1924,7 @@ static struct platform_device bfin_i2s = { }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_TDM) || defined(CONFIG_SND_BF5XX_SOC_TDM_MODULE) -static struct platform_device bfin_tdm = { - .name = "bfin-tdm", - .id = CONFIG_SND_BF5XX_SPORT_NUM, - .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]), - .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM], - .dev = { - .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM], - }, -}; -#endif - -#if defined(CONFIG_SND_BF5XX_SOC_AC97) || defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97) static struct platform_device bfin_ac97 = { .name = "bfin-ac97", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -1484,12 +1939,29 @@ static struct platform_device bfin_ac97 = { static struct platform_device *ezkit_devices[] __initdata = { &bfin_dpmc, - -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if defined(CONFIG_PINCTRL_ADI2) + &bfin_pinctrl_device, + &bfin_pint0_device, + &bfin_pint1_device, + &bfin_pint2_device, + &bfin_pint3_device, + &bfin_gpa_device, + &bfin_gpb_device, + &bfin_gpc_device, + &bfin_gpd_device, + &bfin_gpe_device, + &bfin_gpf_device, + &bfin_gpg_device, + &bfin_gph_device, + &bfin_gpi_device, + &bfin_gpj_device, +#endif + +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -1504,7 +1976,7 @@ static struct platform_device *ezkit_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -1519,23 +1991,23 @@ static struct platform_device *ezkit_devices[] __initdata = { #endif #endif -#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) +#if IS_ENABLED(CONFIG_FB_BF54X_LQ043) &bf54x_lq043_device, #endif -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#if IS_ENABLED(CONFIG_SMSC911X) &smsc911x_device, #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) &musb_device, #endif -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) &bfin_isp1760_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -1550,82 +2022,137 @@ static struct platform_device *ezkit_devices[] __initdata = { #endif #endif -#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) +#if IS_ENABLED(CONFIG_CAN_BFIN) &bfin_can0_device, &bfin_can1_device, #endif -#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) +#if IS_ENABLED(CONFIG_PATA_BF54X) &bfin_atapi_device, #endif -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) &bf5xx_nand_device, #endif -#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SDH_BFIN) &bf54x_sdh_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bf54x_spi_master0, &bf54x_spi_master1, #endif -#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \ - || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE) &bfin_capture_device, #endif -#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_BFIN) &bf54x_kpad_device, #endif -#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) +#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY) &bfin_rotary_device, #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi0_device, #if !defined(CONFIG_BF542) &i2c_bfin_twi1_device, #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &ezkit_flash_device, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \ - defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) || \ - defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) - &bfin_pcm, +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) + &bfin_i2s_pcm, +#endif + +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) + &bfin_ac97_pcm, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD1980) || defined(CONFIG_SND_BF5XX_SOC_AD1980_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1980) &bfin_ad1980_codec_device, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) &bfin_i2s, #endif -#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) - &bfin_tdm, +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) + &bfin_ac97, #endif +}; -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) - &bfin_ac97, +/* Pin control settings */ +static struct pinctrl_map __initdata bfin_pinmux_map[] = { + /* per-device maps */ + PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.0", "pinctrl-adi2.0", NULL, "uart0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.1", "pinctrl-adi2.0", NULL, "uart1"), +#ifdef CONFIG_BFIN_UART1_CTSRTS + PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.1", "pinctrl-adi2.0", NULL, "uart1_ctsrts"), #endif + PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.2", "pinctrl-adi2.0", NULL, "uart2"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.3", "pinctrl-adi2.0", NULL, "uart3"), +#ifdef CONFIG_BFIN_UART3_CTSRTS + PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.3", "pinctrl-adi2.0", NULL, "uart3_ctsrts"), +#endif + PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.0", "pinctrl-adi2.0", NULL, "uart0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.1", "pinctrl-adi2.0", NULL, "uart1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.2", "pinctrl-adi2.0", NULL, "uart2"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.3", "pinctrl-adi2.0", NULL, "uart3"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-sdh.0", "pinctrl-adi2.0", NULL, "rsi0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-spi.0", "pinctrl-adi2.0", NULL, "spi0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-spi.1", "pinctrl-adi2.0", NULL, "spi1"), + PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.0", "pinctrl-adi2.0", NULL, "twi0"), +#if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */ + PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.1", "pinctrl-adi2.0", NULL, "twi1"), +#endif + PIN_MAP_MUX_GROUP_DEFAULT("bfin-rotary", "pinctrl-adi2.0", NULL, "rotary"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_can.0", "pinctrl-adi2.0", NULL, "can0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_can.1", "pinctrl-adi2.0", NULL, "can1"), + PIN_MAP_MUX_GROUP_DEFAULT("bf54x-lq043", "pinctrl-adi2.0", "ppi0_24bgrp", "ppi0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.0", "pinctrl-adi2.0", NULL, "sport0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.0", "pinctrl-adi2.0", NULL, "sport0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-ac97.0", "pinctrl-adi2.0", NULL, "sport0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.1", "pinctrl-adi2.0", NULL, "sport1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.1", "pinctrl-adi2.0", NULL, "sport1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-ac97.1", "pinctrl-adi2.0", NULL, "sport1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.2", "pinctrl-adi2.0", NULL, "sport2"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.2", "pinctrl-adi2.0", NULL, "sport2"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-ac97.2", "pinctrl-adi2.0", NULL, "sport2"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.3", "pinctrl-adi2.0", NULL, "sport3"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.3", "pinctrl-adi2.0", NULL, "sport3"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-ac97.3", "pinctrl-adi2.0", NULL, "sport3"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-sport-uart.0", "pinctrl-adi2.0", NULL, "sport0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-sport-uart.1", "pinctrl-adi2.0", NULL, "sport1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-sport-uart.2", "pinctrl-adi2.0", NULL, "sport2"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-sport-uart.3", "pinctrl-adi2.0", NULL, "sport3"), + PIN_MAP_MUX_GROUP_DEFAULT("pata-bf54x", "pinctrl-adi2.0", NULL, "atapi"), +#ifdef CONFIG_BF548_ATAPI_ALTERNATIVE_PORT + PIN_MAP_MUX_GROUP_DEFAULT("pata-bf54x", "pinctrl-adi2.0", NULL, "atapi_alter"), +#endif + PIN_MAP_MUX_GROUP_DEFAULT("bf5xx-nand.0", "pinctrl-adi2.0", NULL, "nfc0"), + PIN_MAP_MUX_GROUP_DEFAULT("bf54x-keys", "pinctrl-adi2.0", "keys_4x4grp", "keys"), + PIN_MAP_MUX_GROUP("bf54x-keys", "4bit", "pinctrl-adi2.0", "keys_4x4grp", "keys"), + PIN_MAP_MUX_GROUP("bf54x-keys", "8bit", "pinctrl-adi2.0", "keys_8x8grp", "keys"), }; static int __init ezkit_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); + /* Initialize pinmuxing */ + pinctrl_register_mappings(bfin_pinmux_map, + ARRAY_SIZE(bfin_pinmux_map)); + i2c_register_board_info(0, bfin_i2c_board_info0, ARRAY_SIZE(bfin_i2c_board_info0)); #if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */ @@ -1657,21 +2184,6 @@ static struct platform_device *ezkit_early_devices[] __initdata = { &bfin_uart3_device, #endif #endif - -#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) -#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART - &bfin_sport0_uart_device, -#endif -#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART - &bfin_sport1_uart_device, -#endif -#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART - &bfin_sport2_uart_device, -#endif -#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART - &bfin_sport3_uart_device, -#endif -#endif }; void __init native_machine_early_platform_add_devices(void) diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h index ac96ee83b00..098fad63e03 100644 --- a/arch/blackfin/mach-bf548/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h @@ -6,8 +6,7 @@ * DO NOT EDIT THIS FILE * * Copyright 2004-2011 Analog Devices Inc. - * Licensed under the ADI BSD license. - * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd + * Licensed under the Clear BSD license. */ /* This file should be up to date with: @@ -297,5 +296,6 @@ #define ANOMALY_05000440 (0) #define ANOMALY_05000475 (0) #define ANOMALY_05000480 (0) +#define ANOMALY_16000030 (0) #endif diff --git a/arch/blackfin/mach-bf548/include/mach/defBF542.h b/arch/blackfin/mach-bf548/include/mach/defBF542.h index 629bf216e2b..51161575a16 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF542.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF542.h @@ -1,7 +1,7 @@ /* * Copyright 2007-2010 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) */ #ifndef _DEF_BF542_H diff --git a/arch/blackfin/mach-bf548/include/mach/defBF544.h b/arch/blackfin/mach-bf548/include/mach/defBF544.h index bcccab36629..018ebfc27f5 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF544.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF544.h @@ -1,7 +1,7 @@ /* * Copyright 2007-2010 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) */ #ifndef _DEF_BF544_H @@ -601,36 +601,6 @@ #define GU_TRANS 0xff00 /* Transparent Color - G/U Component */ #define BV_TRANS 0xff0000 /* Transparent Color - B/V Component */ -/* Bit masks for HOST_CONTROL */ - -#define HOST_EN 0x1 /* Host Enable */ -#define HOST_END 0x2 /* Host Endianess */ -#define DATA_SIZE 0x4 /* Data Size */ -#define HOST_RST 0x8 /* Host Reset */ -#define HRDY_OVR 0x20 /* Host Ready Override */ -#define INT_MODE 0x40 /* Interrupt Mode */ -#define BT_EN 0x80 /* Bus Timeout Enable */ -#define EHW 0x100 /* Enable Host Write */ -#define EHR 0x200 /* Enable Host Read */ -#define BDR 0x400 /* Burst DMA Requests */ - -/* Bit masks for HOST_STATUS */ - -#define DMA_READY 0x1 /* DMA Ready */ -#define FIFOFULL 0x2 /* FIFO Full */ -#define FIFOEMPTY 0x4 /* FIFO Empty */ -#define DMA_COMPLETE 0x8 /* DMA Complete */ -#define HSHK 0x10 /* Host Handshake */ -#define HSTIMEOUT 0x20 /* Host Timeout */ -#define HIRQ 0x40 /* Host Interrupt Request */ -#define ALLOW_CNFG 0x80 /* Allow New Configuration */ -#define DMA_DIR 0x100 /* DMA Direction */ -#define BTE 0x200 /* Bus Timeout Enabled */ - -/* Bit masks for HOST_TIMEOUT */ - -#define COUNT_TIMEOUT 0x7ff /* Host Timeout count */ - /* Bit masks for TIMER_ENABLE1 */ #define TIMEN8 0x1 /* Timer 8 Enable */ diff --git a/arch/blackfin/mach-bf548/include/mach/defBF547.h b/arch/blackfin/mach-bf548/include/mach/defBF547.h index 1fa41ec03f3..d55dcc0f532 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF547.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF547.h @@ -1,7 +1,7 @@ /* * Copyright 2008-2010 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) */ #ifndef _DEF_BF547_H @@ -581,36 +581,6 @@ #define GU_TRANS 0xff00 /* Transparent Color - G/U Component */ #define BV_TRANS 0xff0000 /* Transparent Color - B/V Component */ -/* Bit masks for HOST_CONTROL */ - -#define HOST_EN 0x1 /* Host Enable */ -#define HOST_END 0x2 /* Host Endianess */ -#define DATA_SIZE 0x4 /* Data Size */ -#define HOST_RST 0x8 /* Host Reset */ -#define HRDY_OVR 0x20 /* Host Ready Override */ -#define INT_MODE 0x40 /* Interrupt Mode */ -#define BT_EN 0x80 /* Bus Timeout Enable */ -#define EHW 0x100 /* Enable Host Write */ -#define EHR 0x200 /* Enable Host Read */ -#define BDR 0x400 /* Burst DMA Requests */ - -/* Bit masks for HOST_STATUS */ - -#define DMA_READY 0x1 /* DMA Ready */ -#define FIFOFULL 0x2 /* FIFO Full */ -#define FIFOEMPTY 0x4 /* FIFO Empty */ -#define DMA_COMPLETE 0x8 /* DMA Complete */ -#define HSHK 0x10 /* Host Handshake */ -#define HSTIMEOUT 0x20 /* Host Timeout */ -#define HIRQ 0x40 /* Host Interrupt Request */ -#define ALLOW_CNFG 0x80 /* Allow New Configuration */ -#define DMA_DIR 0x100 /* DMA Direction */ -#define BTE 0x200 /* Bus Timeout Enabled */ - -/* Bit masks for HOST_TIMEOUT */ - -#define COUNT_TIMEOUT 0x7ff /* Host Timeout count */ - /* Bit masks for KPAD_CTL */ #define KPAD_EN 0x1 /* Keypad Enable */ diff --git a/arch/blackfin/mach-bf548/include/mach/defBF548.h b/arch/blackfin/mach-bf548/include/mach/defBF548.h index 3c7f1b69349..27f29481e28 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF548.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF548.h @@ -1,7 +1,7 @@ /* * Copyright 2007-2010 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) */ #ifndef _DEF_BF548_H diff --git a/arch/blackfin/mach-bf548/include/mach/defBF549.h b/arch/blackfin/mach-bf548/include/mach/defBF549.h index 9a45cb6b30d..ac569fc1297 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF549.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF549.h @@ -1,7 +1,7 @@ /* * Copyright 2007-2010 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) */ #ifndef _DEF_BF549_H diff --git a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h index 0867c2bedb4..8f6e1925779 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h @@ -1,7 +1,7 @@ /* * Copyright 2007-2010 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) */ #ifndef _DEF_BF54X_H @@ -2062,115 +2062,6 @@ #define LOW_EVEN 0xff0000 /* Lower Limit for Even Bytes (Luma) */ #define HIGH_EVEN 0xff000000 /* Upper Limit for Even Bytes (Luma) */ -/* ************************************************ */ -/* The TWI bit masks fields are from the ADSP-BF538 */ -/* and they have not been verified as the final */ -/* ones for the Moab processors ... bz 1/19/2007 */ -/* ************************************************ */ - -/* Bit masks for TWIx_CONTROL */ - -#define PRESCALE 0x7f /* Prescale Value */ -#define TWI_ENA 0x80 /* TWI Enable */ -#define SCCB 0x200 /* Serial Camera Control Bus */ - -/* Bit maskes for TWIx_CLKDIV */ - -#define CLKLOW 0xff /* Clock Low */ -#define CLKHI 0xff00 /* Clock High */ - -/* Bit maskes for TWIx_SLAVE_CTL */ - -#define SEN 0x1 /* Slave Enable */ -#define STDVAL 0x4 /* Slave Transmit Data Valid */ -#define NAK 0x8 /* Not Acknowledge */ -#define GEN 0x10 /* General Call Enable */ - -/* Bit maskes for TWIx_SLAVE_ADDR */ - -#define SADDR 0x7f /* Slave Mode Address */ - -/* Bit maskes for TWIx_SLAVE_STAT */ - -#define SDIR 0x1 /* Slave Transfer Direction */ -#define GCALL 0x2 /* General Call */ - -/* Bit maskes for TWIx_MASTER_CTL */ - -#define MEN 0x1 /* Master Mode Enable */ -#define MDIR 0x4 /* Master Transfer Direction */ -#define FAST 0x8 /* Fast Mode */ -#define STOP 0x10 /* Issue Stop Condition */ -#define RSTART 0x20 /* Repeat Start */ -#define DCNT 0x3fc0 /* Data Transfer Count */ -#define SDAOVR 0x4000 /* Serial Data Override */ -#define SCLOVR 0x8000 /* Serial Clock Override */ - -/* Bit maskes for TWIx_MASTER_ADDR */ - -#define MADDR 0x7f /* Master Mode Address */ - -/* Bit maskes for TWIx_MASTER_STAT */ - -#define MPROG 0x1 /* Master Transfer in Progress */ -#define LOSTARB 0x2 /* Lost Arbitration */ -#define ANAK 0x4 /* Address Not Acknowledged */ -#define DNAK 0x8 /* Data Not Acknowledged */ -#define BUFRDERR 0x10 /* Buffer Read Error */ -#define BUFWRERR 0x20 /* Buffer Write Error */ -#define SDASEN 0x40 /* Serial Data Sense */ -#define SCLSEN 0x80 /* Serial Clock Sense */ -#define BUSBUSY 0x100 /* Bus Busy */ - -/* Bit maskes for TWIx_FIFO_CTL */ - -#define XMTFLUSH 0x1 /* Transmit Buffer Flush */ -#define RCVFLUSH 0x2 /* Receive Buffer Flush */ -#define XMTINTLEN 0x4 /* Transmit Buffer Interrupt Length */ -#define RCVINTLEN 0x8 /* Receive Buffer Interrupt Length */ - -/* Bit maskes for TWIx_FIFO_STAT */ - -#define XMTSTAT 0x3 /* Transmit FIFO Status */ -#define RCVSTAT 0xc /* Receive FIFO Status */ - -/* Bit maskes for TWIx_INT_MASK */ - -#define SINITM 0x1 /* Slave Transfer Initiated Interrupt Mask */ -#define SCOMPM 0x2 /* Slave Transfer Complete Interrupt Mask */ -#define SERRM 0x4 /* Slave Transfer Error Interrupt Mask */ -#define SOVFM 0x8 /* Slave Overflow Interrupt Mask */ -#define MCOMPM 0x10 /* Master Transfer Complete Interrupt Mask */ -#define MERRM 0x20 /* Master Transfer Error Interrupt Mask */ -#define XMTSERVM 0x40 /* Transmit FIFO Service Interrupt Mask */ -#define RCVSERVM 0x80 /* Receive FIFO Service Interrupt Mask */ - -/* Bit maskes for TWIx_INT_STAT */ - -#define SINIT 0x1 /* Slave Transfer Initiated */ -#define SCOMP 0x2 /* Slave Transfer Complete */ -#define SERR 0x4 /* Slave Transfer Error */ -#define SOVF 0x8 /* Slave Overflow */ -#define MCOMP 0x10 /* Master Transfer Complete */ -#define MERR 0x20 /* Master Transfer Error */ -#define XMTSERV 0x40 /* Transmit FIFO Service */ -#define RCVSERV 0x80 /* Receive FIFO Service */ - -/* Bit maskes for TWIx_XMT_DATA8 */ - -#define XMTDATA8 0xff /* Transmit FIFO 8-Bit Data */ - -/* Bit maskes for TWIx_XMT_DATA16 */ - -#define XMTDATA16 0xffff /* Transmit FIFO 16-Bit Data */ - -/* Bit maskes for TWIx_RCV_DATA8 */ - -#define RCVDATA8 0xff /* Receive FIFO 8-Bit Data */ - -/* Bit maskes for TWIx_RCV_DATA16 */ - -#define RCVDATA16 0xffff /* Receive FIFO 16-Bit Data */ /* ******************************************* */ /* MULTI BIT MACRO ENUMERATIONS */ diff --git a/arch/blackfin/mach-bf548/include/mach/gpio.h b/arch/blackfin/mach-bf548/include/mach/gpio.h index 35c8ced4615..006da1edcf8 100644 --- a/arch/blackfin/mach-bf548/include/mach/gpio.h +++ b/arch/blackfin/mach-bf548/include/mach/gpio.h @@ -171,6 +171,8 @@ #define MAX_BLACKFIN_GPIOS 160 #define BFIN_GPIO_PINT 1 +#define NR_PINT_SYS_IRQS 4 +#define NR_PINTS 160 #ifndef __ASSEMBLY__ @@ -192,14 +194,6 @@ struct gpio_port_t { unsigned int port_mux; }; -struct gpio_port_s { - unsigned short fer; - unsigned short data; - unsigned short dir; - unsigned short inen; - unsigned int mux; -}; - #endif #include <mach-common/ports-a.h> diff --git a/arch/blackfin/mach-bf548/include/mach/irq.h b/arch/blackfin/mach-bf548/include/mach/irq.h index 10dc142c518..cf7cb725cfa 100644 --- a/arch/blackfin/mach-bf548/include/mach/irq.h +++ b/arch/blackfin/mach-bf548/include/mach/irq.h @@ -433,7 +433,7 @@ #include <linux/types.h> /* - * bfin pint registers layout + * gpio pint registers layout */ struct bfin_pint_regs { u32 mask_set; diff --git a/arch/blackfin/mach-bf548/include/mach/portmux.h b/arch/blackfin/mach-bf548/include/mach/portmux.h index e2224620273..d9f8632d7d0 100644 --- a/arch/blackfin/mach-bf548/include/mach/portmux.h +++ b/arch/blackfin/mach-bf548/include/mach/portmux.h @@ -7,8 +7,6 @@ #ifndef _MACH_PORTMUX_H_ #define _MACH_PORTMUX_H_ -#define MAX_RESOURCES MAX_BLACKFIN_GPIOS - #define P_SPORT2_TFS (P_DEFINED | P_IDENT(GPIO_PA0) | P_FUNCT(0)) #define P_SPORT2_DTSEC (P_DEFINED | P_IDENT(GPIO_PA1) | P_FUNCT(0)) #define P_SPORT2_DTPRI (P_DEFINED | P_IDENT(GPIO_PA2) | P_FUNCT(0)) diff --git a/arch/blackfin/mach-bf561/atomic.S b/arch/blackfin/mach-bf561/atomic.S index 52d6f73fcce..2a08df8e8c4 100644 --- a/arch/blackfin/mach-bf561/atomic.S +++ b/arch/blackfin/mach-bf561/atomic.S @@ -72,6 +72,13 @@ ENTRY(_get_core_lock_noflush) SSYNC(r2); jump .Lretry_corelock_noflush .Ldone_corelock_noflush: + /* + * SMP kgdb runs into dead loop without NOP here, when one core + * single steps over get_core_lock_noflush and the other executes + * get_core_lock as a slave node. + */ + nop; + CSYNC(r2); rts; ENDPROC(_get_core_lock_noflush) diff --git a/arch/blackfin/mach-bf561/boards/acvilon.c b/arch/blackfin/mach-bf561/boards/acvilon.c index f6ffd6f054c..6ab951534d7 100644 --- a/arch/blackfin/mach-bf561/boards/acvilon.c +++ b/arch/blackfin/mach-bf561/boards/acvilon.c @@ -44,6 +44,7 @@ #include <linux/spi/flash.h> #include <linux/irq.h> #include <linux/interrupt.h> +#include <linux/gpio.h> #include <linux/jiffies.h> #include <linux/i2c-pca-platform.h> #include <linux/delay.h> @@ -60,7 +61,7 @@ */ const char bfin_board_name[] = "Acvilon board"; -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) #include <linux/usb/isp1760.h> static struct resource bfin_isp1760_resources[] = { [0] = { @@ -137,7 +138,7 @@ static struct i2c_board_info acvilon_i2c_devs[] __initdata = { }, }; -#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE) +#if IS_ENABLED(CONFIG_MTD_PLATRAM) static struct platdata_mtd_ram mtd_ram_data = { .mapname = "rootfs(RAM)", .bankwidth = 4, @@ -160,7 +161,7 @@ static struct platform_device mtd_ram_device = { }; #endif -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#if IS_ENABLED(CONFIG_SMSC911X) #include <linux/smsc911x.h> static struct resource smsc911x_resources[] = { { @@ -194,7 +195,7 @@ static struct platform_device smsc911x_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -246,9 +247,7 @@ static struct platform_device bfin_uart0_device = { #endif #endif -#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) - -const char *part_probes[] = { "cmdlinepart", NULL }; +#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM) static struct mtd_partition bfin_plat_nand_partitions[] = { { @@ -289,7 +288,6 @@ static struct platform_nand_data bfin_plat_nand_data = { .chip = { .nr_chips = 1, .chip_delay = 30, - .part_probe_types = part_probes, .partitions = bfin_plat_nand_partitions, .nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions), }, @@ -326,7 +324,7 @@ static void bfin_plat_nand_init(void) } #endif -#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE) +#if IS_ENABLED(CONFIG_MTD_DATAFLASH) static struct mtd_partition bfin_spi_dataflash_partitions[] = { { .name = "bootloader", @@ -372,7 +370,7 @@ static struct bfin5xx_spi_chip data_flash_chip_info = { }; #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { [0] = { @@ -411,7 +409,7 @@ static struct platform_device bfin_spi0_device = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -419,7 +417,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 3, }, #endif -#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE) +#if IS_ENABLED(CONFIG_MTD_DATAFLASH) { /* DataFlash chip */ .modalias = "mtd_dataflash", .max_speed_hz = 33250000, /* max spi clock (SCK) speed in HZ */ @@ -475,11 +473,11 @@ static struct platform_device bfin_dpmc = { static struct platform_device *acvilon_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -487,17 +485,17 @@ static struct platform_device *acvilon_devices[] __initdata = { &bfin_gpios_device, -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#if IS_ENABLED(CONFIG_SMSC911X) &smsc911x_device, #endif &bfin_i2c_pca_device, -#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM) &bfin_async_nand_device, #endif -#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE) +#if IS_ENABLED(CONFIG_MTD_PLATRAM) &mtd_ram_device, #endif diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index d81450f635d..e862f7823e6 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -13,11 +13,12 @@ #include <linux/mtd/partitions.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) #include <linux/usb/isp1362.h> #endif #include <linux/ata_platform.h> #include <linux/irq.h> +#include <linux/gpio.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <asm/portmux.h> @@ -29,10 +30,10 @@ */ const char bfin_board_name[] = "Bluetechnix CM BF561"; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* all SPI peripherals info goes here */ -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -64,7 +65,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -77,7 +78,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -85,7 +86,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 4, }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -134,14 +135,14 @@ static struct platform_device bfin_spi0_device = { #endif /* spi master and devices */ -#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) +#if IS_ENABLED(CONFIG_FB_HITACHI_TX09) static struct platform_device hitachi_fb_device = { .name = "hitachi-tx09", }; #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -173,7 +174,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#if IS_ENABLED(CONFIG_SMSC911X) #include <linux/smsc911x.h> static struct resource smsc911x_resources[] = { @@ -208,7 +209,7 @@ static struct platform_device smsc911x_device = { }; #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x24000000, @@ -229,7 +230,7 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) static struct resource isp1362_hcd_resources[] = { { .start = 0x24008000, @@ -268,7 +269,7 @@ static struct platform_device isp1362_hcd_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -319,7 +320,7 @@ static struct platform_device bfin_uart0_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -348,7 +349,7 @@ static struct platform_device bfin_sir0_device = { #endif #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) #define PATA_INT IRQ_PF46 static struct pata_platform_info bfin_pata_platform_data = { @@ -385,7 +386,7 @@ static struct platform_device bfin_pata_device = { }; #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition para_partitions[] = { { .name = "bootloader(nor)", @@ -456,54 +457,54 @@ static struct platform_device *cm_bf561_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) +#if IS_ENABLED(CONFIG_FB_HITACHI_TX09) &hitachi_fb_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) &isp1362_hcd_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#if IS_ENABLED(CONFIG_SMSC911X) &smsc911x_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) &bfin_pata_device, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) ¶_flash_device, #endif }; static int __init net2272_init(void) { -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) int ret; ret = gpio_request(GPIO_PF46, "net2272"); @@ -523,11 +524,11 @@ static int __init cm_bf561_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf561_devices, ARRAY_SIZE(cm_bf561_devices)); -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN); #endif diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index 838978808a1..2de71e8c104 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -14,6 +14,7 @@ #include <linux/spi/spi.h> #include <linux/irq.h> #include <linux/interrupt.h> +#include <linux/gpio.h> #include <linux/delay.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> @@ -25,7 +26,7 @@ */ const char bfin_board_name[] = "ADI BF561-EZKIT"; -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) #include <linux/usb/isp1760.h> static struct resource bfin_isp1760_resources[] = { [0] = { @@ -60,7 +61,7 @@ static struct platform_device bfin_isp1760_device = { }; #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) #include <linux/usb/isp1362.h> static struct resource isp1362_hcd_resources[] = { @@ -101,7 +102,7 @@ static struct platform_device isp1362_hcd_device = { }; #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x2C000000, @@ -129,7 +130,7 @@ static struct platform_device net2272_bfin_device = { * USB-LAN EzExtender board * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -163,7 +164,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -214,7 +215,7 @@ static struct platform_device bfin_uart0_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -243,7 +244,7 @@ static struct platform_device bfin_sir0_device = { #endif #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition ezkit_partitions[] = { { .name = "bootloader(nor)", @@ -291,7 +292,7 @@ static struct platform_device ezkit_flash_device = { }; #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { [0] = { @@ -330,8 +331,7 @@ static struct platform_device bfin_spi0_device = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ - || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -341,7 +341,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -351,7 +351,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -375,7 +375,7 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) +#if IS_ENABLED(CONFIG_I2C_GPIO) #include <linux/i2c-gpio.h> static struct i2c_gpio_platform_data i2c_gpio_data = { @@ -422,8 +422,7 @@ static struct platform_device bfin_dpmc = { }, }; -#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \ - || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE) #include <linux/videodev2.h> #include <media/blackfin/bfin_capture.h> #include <media/blackfin/ppi.h> @@ -443,8 +442,7 @@ static const struct ppi_info ppi_info = { .pin_req = ppi_req, }; -#if defined(CONFIG_VIDEO_ADV7183) \ - || defined(CONFIG_VIDEO_ADV7183_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_ADV7183) #include <media/adv7183.h> static struct v4l2_input adv7183_inputs[] = { { @@ -452,18 +450,21 @@ static struct v4l2_input adv7183_inputs[] = { .name = "Composite", .type = V4L2_INPUT_TYPE_CAMERA, .std = V4L2_STD_ALL, + .capabilities = V4L2_IN_CAP_STD, }, { .index = 1, .name = "S-Video", .type = V4L2_INPUT_TYPE_CAMERA, .std = V4L2_STD_ALL, + .capabilities = V4L2_IN_CAP_STD, }, { .index = 2, .name = "Component", .type = V4L2_INPUT_TYPE_CAMERA, .std = V4L2_STD_ALL, + .capabilities = V4L2_IN_CAP_STD, }, }; @@ -512,7 +513,7 @@ static struct platform_device bfin_capture_device = { }; #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) static struct platform_device bfin_i2s = { .name = "bfin-i2s", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -520,19 +521,25 @@ static struct platform_device bfin_i2s = { }; #endif -#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) -static struct platform_device bfin_tdm = { - .name = "bfin-tdm", +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) +static struct platform_device bfin_ac97 = { + .name = "bfin-ac97", .id = CONFIG_SND_BF5XX_SPORT_NUM, /* TODO: add platform data here */ }; #endif -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) -static struct platform_device bfin_ac97 = { - .name = "bfin-ac97", - .id = CONFIG_SND_BF5XX_SPORT_NUM, - /* TODO: add platform data here */ +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) +static const char * const ad1836_link[] = { + "bfin-i2s.0", + "spi0.4", +}; +static struct platform_device bfin_ad1836_machine = { + .name = "bfin-snd-ad1836", + .id = -1, + .dev = { + .platform_data = (void *)ad1836_link, + }, }; #endif @@ -540,71 +547,70 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) &bfin_isp1760_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) +#if IS_ENABLED(CONFIG_I2C_GPIO) &i2c_gpio_device, #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) &isp1362_hcd_device, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &ezkit_flash_device, #endif -#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \ - || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE) &bfin_capture_device, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) &bfin_i2s, #endif -#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) - &bfin_tdm, +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) + &bfin_ac97, #endif -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) - &bfin_ac97, +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) + &bfin_ad1836_machine, #endif }; static int __init net2272_init(void) { -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) int ret; ret = gpio_request(GPIO_PF11, "net2272"); @@ -630,12 +636,12 @@ static int __init ezkit_init(void) if (ret < 0) return ret; -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() | (1 << 12)); SSYNC(); #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() | (1 << 15)); bfin_write_FIO0_FLAG_S(1 << 15); SSYNC(); diff --git a/arch/blackfin/mach-bf561/boards/tepla.c b/arch/blackfin/mach-bf561/boards/tepla.c index 1a57bc986aa..f87b8cc0cd4 100644 --- a/arch/blackfin/mach-bf561/boards/tepla.c +++ b/arch/blackfin/mach-bf561/boards/tepla.c @@ -42,7 +42,7 @@ static struct platform_device smc91x_device = { .resource = smc91x_resources, }; -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -93,7 +93,7 @@ static struct platform_device bfin_uart0_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -125,13 +125,13 @@ static struct platform_device bfin_sir0_device = { static struct platform_device *tepla_devices[] __initdata = { &smc91x_device, -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h index 836baeed303..038249c1d0d 100644 --- a/arch/blackfin/mach-bf561/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h @@ -6,8 +6,7 @@ * DO NOT EDIT THIS FILE * * Copyright 2004-2011 Analog Devices Inc. - * Licensed under the ADI BSD license. - * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd + * Licensed under the Clear BSD license. */ /* This file should be up to date with: @@ -349,5 +348,6 @@ #define ANOMALY_05000474 (0) #define ANOMALY_05000480 (0) #define ANOMALY_05000485 (0) +#define ANOMALY_16000030 (0) #endif diff --git a/arch/blackfin/mach-bf561/include/mach/defBF561.h b/arch/blackfin/mach-bf561/include/mach/defBF561.h index 71e805ea74e..9f21f768c63 100644 --- a/arch/blackfin/mach-bf561/include/mach/defBF561.h +++ b/arch/blackfin/mach-bf561/include/mach/defBF561.h @@ -1,7 +1,7 @@ /* * Copyright 2005-2010 Analog Devices Inc. * - * Licensed under the ADI BSD license or the GPL-2 (or later) + * Licensed under the Clear BSD license or the GPL-2 (or later) */ #ifndef _DEF_BF561_H @@ -479,61 +479,61 @@ #define DMA1_11_PERIPHERAL_MAP 0xFFC01EEC /* DMA1 Channel 11 Peripheral Map Register */ /* Memory DMA1 Controller registers (0xFFC0 1E80-0xFFC0 1FFF) */ -#define MDMA_D2_CONFIG 0xFFC01F08 /*MemDMA1 Stream 0 Destination Configuration */ -#define MDMA_D2_NEXT_DESC_PTR 0xFFC01F00 /*MemDMA1 Stream 0 Destination Next Descriptor Ptr Reg */ -#define MDMA_D2_START_ADDR 0xFFC01F04 /*MemDMA1 Stream 0 Destination Start Address */ -#define MDMA_D2_X_COUNT 0xFFC01F10 /*MemDMA1 Stream 0 Destination Inner-Loop Count */ -#define MDMA_D2_Y_COUNT 0xFFC01F18 /*MemDMA1 Stream 0 Destination Outer-Loop Count */ -#define MDMA_D2_X_MODIFY 0xFFC01F14 /*MemDMA1 Stream 0 Dest Inner-Loop Address-Increment */ -#define MDMA_D2_Y_MODIFY 0xFFC01F1C /*MemDMA1 Stream 0 Dest Outer-Loop Address-Increment */ -#define MDMA_D2_CURR_DESC_PTR 0xFFC01F20 /*MemDMA1 Stream 0 Dest Current Descriptor Ptr reg */ -#define MDMA_D2_CURR_ADDR 0xFFC01F24 /*MemDMA1 Stream 0 Destination Current Address */ -#define MDMA_D2_CURR_X_COUNT 0xFFC01F30 /*MemDMA1 Stream 0 Dest Current Inner-Loop Count */ -#define MDMA_D2_CURR_Y_COUNT 0xFFC01F38 /*MemDMA1 Stream 0 Dest Current Outer-Loop Count */ -#define MDMA_D2_IRQ_STATUS 0xFFC01F28 /*MemDMA1 Stream 0 Destination Interrupt/Status */ -#define MDMA_D2_PERIPHERAL_MAP 0xFFC01F2C /*MemDMA1 Stream 0 Destination Peripheral Map */ - -#define MDMA_S2_CONFIG 0xFFC01F48 /*MemDMA1 Stream 0 Source Configuration */ -#define MDMA_S2_NEXT_DESC_PTR 0xFFC01F40 /*MemDMA1 Stream 0 Source Next Descriptor Ptr Reg */ -#define MDMA_S2_START_ADDR 0xFFC01F44 /*MemDMA1 Stream 0 Source Start Address */ -#define MDMA_S2_X_COUNT 0xFFC01F50 /*MemDMA1 Stream 0 Source Inner-Loop Count */ -#define MDMA_S2_Y_COUNT 0xFFC01F58 /*MemDMA1 Stream 0 Source Outer-Loop Count */ -#define MDMA_S2_X_MODIFY 0xFFC01F54 /*MemDMA1 Stream 0 Source Inner-Loop Address-Increment */ -#define MDMA_S2_Y_MODIFY 0xFFC01F5C /*MemDMA1 Stream 0 Source Outer-Loop Address-Increment */ -#define MDMA_S2_CURR_DESC_PTR 0xFFC01F60 /*MemDMA1 Stream 0 Source Current Descriptor Ptr reg */ -#define MDMA_S2_CURR_ADDR 0xFFC01F64 /*MemDMA1 Stream 0 Source Current Address */ -#define MDMA_S2_CURR_X_COUNT 0xFFC01F70 /*MemDMA1 Stream 0 Source Current Inner-Loop Count */ -#define MDMA_S2_CURR_Y_COUNT 0xFFC01F78 /*MemDMA1 Stream 0 Source Current Outer-Loop Count */ -#define MDMA_S2_IRQ_STATUS 0xFFC01F68 /*MemDMA1 Stream 0 Source Interrupt/Status */ -#define MDMA_S2_PERIPHERAL_MAP 0xFFC01F6C /*MemDMA1 Stream 0 Source Peripheral Map */ - -#define MDMA_D3_CONFIG 0xFFC01F88 /*MemDMA1 Stream 1 Destination Configuration */ -#define MDMA_D3_NEXT_DESC_PTR 0xFFC01F80 /*MemDMA1 Stream 1 Destination Next Descriptor Ptr Reg */ -#define MDMA_D3_START_ADDR 0xFFC01F84 /*MemDMA1 Stream 1 Destination Start Address */ -#define MDMA_D3_X_COUNT 0xFFC01F90 /*MemDMA1 Stream 1 Destination Inner-Loop Count */ -#define MDMA_D3_Y_COUNT 0xFFC01F98 /*MemDMA1 Stream 1 Destination Outer-Loop Count */ -#define MDMA_D3_X_MODIFY 0xFFC01F94 /*MemDMA1 Stream 1 Dest Inner-Loop Address-Increment */ -#define MDMA_D3_Y_MODIFY 0xFFC01F9C /*MemDMA1 Stream 1 Dest Outer-Loop Address-Increment */ -#define MDMA_D3_CURR_DESC_PTR 0xFFC01FA0 /*MemDMA1 Stream 1 Dest Current Descriptor Ptr reg */ -#define MDMA_D3_CURR_ADDR 0xFFC01FA4 /*MemDMA1 Stream 1 Dest Current Address */ -#define MDMA_D3_CURR_X_COUNT 0xFFC01FB0 /*MemDMA1 Stream 1 Dest Current Inner-Loop Count */ -#define MDMA_D3_CURR_Y_COUNT 0xFFC01FB8 /*MemDMA1 Stream 1 Dest Current Outer-Loop Count */ -#define MDMA_D3_IRQ_STATUS 0xFFC01FA8 /*MemDMA1 Stream 1 Dest Interrupt/Status */ -#define MDMA_D3_PERIPHERAL_MAP 0xFFC01FAC /*MemDMA1 Stream 1 Dest Peripheral Map */ - -#define MDMA_S3_CONFIG 0xFFC01FC8 /*MemDMA1 Stream 1 Source Configuration */ -#define MDMA_S3_NEXT_DESC_PTR 0xFFC01FC0 /*MemDMA1 Stream 1 Source Next Descriptor Ptr Reg */ -#define MDMA_S3_START_ADDR 0xFFC01FC4 /*MemDMA1 Stream 1 Source Start Address */ -#define MDMA_S3_X_COUNT 0xFFC01FD0 /*MemDMA1 Stream 1 Source Inner-Loop Count */ -#define MDMA_S3_Y_COUNT 0xFFC01FD8 /*MemDMA1 Stream 1 Source Outer-Loop Count */ -#define MDMA_S3_X_MODIFY 0xFFC01FD4 /*MemDMA1 Stream 1 Source Inner-Loop Address-Increment */ -#define MDMA_S3_Y_MODIFY 0xFFC01FDC /*MemDMA1 Stream 1 Source Outer-Loop Address-Increment */ -#define MDMA_S3_CURR_DESC_PTR 0xFFC01FE0 /*MemDMA1 Stream 1 Source Current Descriptor Ptr reg */ -#define MDMA_S3_CURR_ADDR 0xFFC01FE4 /*MemDMA1 Stream 1 Source Current Address */ -#define MDMA_S3_CURR_X_COUNT 0xFFC01FF0 /*MemDMA1 Stream 1 Source Current Inner-Loop Count */ -#define MDMA_S3_CURR_Y_COUNT 0xFFC01FF8 /*MemDMA1 Stream 1 Source Current Outer-Loop Count */ -#define MDMA_S3_IRQ_STATUS 0xFFC01FE8 /*MemDMA1 Stream 1 Source Interrupt/Status */ -#define MDMA_S3_PERIPHERAL_MAP 0xFFC01FEC /*MemDMA1 Stream 1 Source Peripheral Map */ +#define MDMA_D0_CONFIG 0xFFC01F08 /*MemDMA1 Stream 0 Destination Configuration */ +#define MDMA_D0_NEXT_DESC_PTR 0xFFC01F00 /*MemDMA1 Stream 0 Destination Next Descriptor Ptr Reg */ +#define MDMA_D0_START_ADDR 0xFFC01F04 /*MemDMA1 Stream 0 Destination Start Address */ +#define MDMA_D0_X_COUNT 0xFFC01F10 /*MemDMA1 Stream 0 Destination Inner-Loop Count */ +#define MDMA_D0_Y_COUNT 0xFFC01F18 /*MemDMA1 Stream 0 Destination Outer-Loop Count */ +#define MDMA_D0_X_MODIFY 0xFFC01F14 /*MemDMA1 Stream 0 Dest Inner-Loop Address-Increment */ +#define MDMA_D0_Y_MODIFY 0xFFC01F1C /*MemDMA1 Stream 0 Dest Outer-Loop Address-Increment */ +#define MDMA_D0_CURR_DESC_PTR 0xFFC01F20 /*MemDMA1 Stream 0 Dest Current Descriptor Ptr reg */ +#define MDMA_D0_CURR_ADDR 0xFFC01F24 /*MemDMA1 Stream 0 Destination Current Address */ +#define MDMA_D0_CURR_X_COUNT 0xFFC01F30 /*MemDMA1 Stream 0 Dest Current Inner-Loop Count */ +#define MDMA_D0_CURR_Y_COUNT 0xFFC01F38 /*MemDMA1 Stream 0 Dest Current Outer-Loop Count */ +#define MDMA_D0_IRQ_STATUS 0xFFC01F28 /*MemDMA1 Stream 0 Destination Interrupt/Status */ +#define MDMA_D0_PERIPHERAL_MAP 0xFFC01F2C /*MemDMA1 Stream 0 Destination Peripheral Map */ + +#define MDMA_S0_CONFIG 0xFFC01F48 /*MemDMA1 Stream 0 Source Configuration */ +#define MDMA_S0_NEXT_DESC_PTR 0xFFC01F40 /*MemDMA1 Stream 0 Source Next Descriptor Ptr Reg */ +#define MDMA_S0_START_ADDR 0xFFC01F44 /*MemDMA1 Stream 0 Source Start Address */ +#define MDMA_S0_X_COUNT 0xFFC01F50 /*MemDMA1 Stream 0 Source Inner-Loop Count */ +#define MDMA_S0_Y_COUNT 0xFFC01F58 /*MemDMA1 Stream 0 Source Outer-Loop Count */ +#define MDMA_S0_X_MODIFY 0xFFC01F54 /*MemDMA1 Stream 0 Source Inner-Loop Address-Increment */ +#define MDMA_S0_Y_MODIFY 0xFFC01F5C /*MemDMA1 Stream 0 Source Outer-Loop Address-Increment */ +#define MDMA_S0_CURR_DESC_PTR 0xFFC01F60 /*MemDMA1 Stream 0 Source Current Descriptor Ptr reg */ +#define MDMA_S0_CURR_ADDR 0xFFC01F64 /*MemDMA1 Stream 0 Source Current Address */ +#define MDMA_S0_CURR_X_COUNT 0xFFC01F70 /*MemDMA1 Stream 0 Source Current Inner-Loop Count */ +#define MDMA_S0_CURR_Y_COUNT 0xFFC01F78 /*MemDMA1 Stream 0 Source Current Outer-Loop Count */ +#define MDMA_S0_IRQ_STATUS 0xFFC01F68 /*MemDMA1 Stream 0 Source Interrupt/Status */ +#define MDMA_S0_PERIPHERAL_MAP 0xFFC01F6C /*MemDMA1 Stream 0 Source Peripheral Map */ + +#define MDMA_D1_CONFIG 0xFFC01F88 /*MemDMA1 Stream 1 Destination Configuration */ +#define MDMA_D1_NEXT_DESC_PTR 0xFFC01F80 /*MemDMA1 Stream 1 Destination Next Descriptor Ptr Reg */ +#define MDMA_D1_START_ADDR 0xFFC01F84 /*MemDMA1 Stream 1 Destination Start Address */ +#define MDMA_D1_X_COUNT 0xFFC01F90 /*MemDMA1 Stream 1 Destination Inner-Loop Count */ +#define MDMA_D1_Y_COUNT 0xFFC01F98 /*MemDMA1 Stream 1 Destination Outer-Loop Count */ +#define MDMA_D1_X_MODIFY 0xFFC01F94 /*MemDMA1 Stream 1 Dest Inner-Loop Address-Increment */ +#define MDMA_D1_Y_MODIFY 0xFFC01F9C /*MemDMA1 Stream 1 Dest Outer-Loop Address-Increment */ +#define MDMA_D1_CURR_DESC_PTR 0xFFC01FA0 /*MemDMA1 Stream 1 Dest Current Descriptor Ptr reg */ +#define MDMA_D1_CURR_ADDR 0xFFC01FA4 /*MemDMA1 Stream 1 Dest Current Address */ +#define MDMA_D1_CURR_X_COUNT 0xFFC01FB0 /*MemDMA1 Stream 1 Dest Current Inner-Loop Count */ +#define MDMA_D1_CURR_Y_COUNT 0xFFC01FB8 /*MemDMA1 Stream 1 Dest Current Outer-Loop Count */ +#define MDMA_D1_IRQ_STATUS 0xFFC01FA8 /*MemDMA1 Stream 1 Dest Interrupt/Status */ +#define MDMA_D1_PERIPHERAL_MAP 0xFFC01FAC /*MemDMA1 Stream 1 Dest Peripheral Map */ + +#define MDMA_S1_CONFIG 0xFFC01FC8 /*MemDMA1 Stream 1 Source Configuration */ +#define MDMA_S1_NEXT_DESC_PTR 0xFFC01FC0 /*MemDMA1 Stream 1 Source Next Descriptor Ptr Reg */ +#define MDMA_S1_START_ADDR 0xFFC01FC4 /*MemDMA1 Stream 1 Source Start Address */ +#define MDMA_S1_X_COUNT 0xFFC01FD0 /*MemDMA1 Stream 1 Source Inner-Loop Count */ +#define MDMA_S1_Y_COUNT 0xFFC01FD8 /*MemDMA1 Stream 1 Source Outer-Loop Count */ +#define MDMA_S1_X_MODIFY 0xFFC01FD4 /*MemDMA1 Stream 1 Source Inner-Loop Address-Increment */ +#define MDMA_S1_Y_MODIFY 0xFFC01FDC /*MemDMA1 Stream 1 Source Outer-Loop Address-Increment */ +#define MDMA_S1_CURR_DESC_PTR 0xFFC01FE0 /*MemDMA1 Stream 1 Source Current Descriptor Ptr reg */ +#define MDMA_S1_CURR_ADDR 0xFFC01FE4 /*MemDMA1 Stream 1 Source Current Address */ +#define MDMA_S1_CURR_X_COUNT 0xFFC01FF0 /*MemDMA1 Stream 1 Source Current Inner-Loop Count */ +#define MDMA_S1_CURR_Y_COUNT 0xFFC01FF8 /*MemDMA1 Stream 1 Source Current Outer-Loop Count */ +#define MDMA_S1_IRQ_STATUS 0xFFC01FE8 /*MemDMA1 Stream 1 Source Interrupt/Status */ +#define MDMA_S1_PERIPHERAL_MAP 0xFFC01FEC /*MemDMA1 Stream 1 Source Peripheral Map */ /* DMA2 Controller registers (0xFFC0 0C00-0xFFC0 0DFF) */ #define DMA2_0_CONFIG 0xFFC00C08 /* DMA2 Channel 0 Configuration register */ @@ -705,61 +705,61 @@ #define DMA2_11_PERIPHERAL_MAP 0xFFC00EEC /* DMA2 Channel 11 Peripheral Map Register */ /* Memory DMA2 Controller registers (0xFFC0 0E80-0xFFC0 0FFF) */ -#define MDMA_D0_CONFIG 0xFFC00F08 /*MemDMA2 Stream 0 Destination Configuration register */ -#define MDMA_D0_NEXT_DESC_PTR 0xFFC00F00 /*MemDMA2 Stream 0 Destination Next Descriptor Ptr Reg */ -#define MDMA_D0_START_ADDR 0xFFC00F04 /*MemDMA2 Stream 0 Destination Start Address */ -#define MDMA_D0_X_COUNT 0xFFC00F10 /*MemDMA2 Stream 0 Dest Inner-Loop Count register */ -#define MDMA_D0_Y_COUNT 0xFFC00F18 /*MemDMA2 Stream 0 Dest Outer-Loop Count register */ -#define MDMA_D0_X_MODIFY 0xFFC00F14 /*MemDMA2 Stream 0 Dest Inner-Loop Address-Increment */ -#define MDMA_D0_Y_MODIFY 0xFFC00F1C /*MemDMA2 Stream 0 Dest Outer-Loop Address-Increment */ -#define MDMA_D0_CURR_DESC_PTR 0xFFC00F20 /*MemDMA2 Stream 0 Dest Current Descriptor Ptr reg */ -#define MDMA_D0_CURR_ADDR 0xFFC00F24 /*MemDMA2 Stream 0 Destination Current Address */ -#define MDMA_D0_CURR_X_COUNT 0xFFC00F30 /*MemDMA2 Stream 0 Dest Current Inner-Loop Count reg */ -#define MDMA_D0_CURR_Y_COUNT 0xFFC00F38 /*MemDMA2 Stream 0 Dest Current Outer-Loop Count reg */ -#define MDMA_D0_IRQ_STATUS 0xFFC00F28 /*MemDMA2 Stream 0 Dest Interrupt/Status Register */ -#define MDMA_D0_PERIPHERAL_MAP 0xFFC00F2C /*MemDMA2 Stream 0 Destination Peripheral Map register */ - -#define MDMA_S0_CONFIG 0xFFC00F48 /*MemDMA2 Stream 0 Source Configuration register */ -#define MDMA_S0_NEXT_DESC_PTR 0xFFC00F40 /*MemDMA2 Stream 0 Source Next Descriptor Ptr Reg */ -#define MDMA_S0_START_ADDR 0xFFC00F44 /*MemDMA2 Stream 0 Source Start Address */ -#define MDMA_S0_X_COUNT 0xFFC00F50 /*MemDMA2 Stream 0 Source Inner-Loop Count register */ -#define MDMA_S0_Y_COUNT 0xFFC00F58 /*MemDMA2 Stream 0 Source Outer-Loop Count register */ -#define MDMA_S0_X_MODIFY 0xFFC00F54 /*MemDMA2 Stream 0 Src Inner-Loop Addr-Increment reg */ -#define MDMA_S0_Y_MODIFY 0xFFC00F5C /*MemDMA2 Stream 0 Src Outer-Loop Addr-Increment reg */ -#define MDMA_S0_CURR_DESC_PTR 0xFFC00F60 /*MemDMA2 Stream 0 Source Current Descriptor Ptr reg */ -#define MDMA_S0_CURR_ADDR 0xFFC00F64 /*MemDMA2 Stream 0 Source Current Address */ -#define MDMA_S0_CURR_X_COUNT 0xFFC00F70 /*MemDMA2 Stream 0 Src Current Inner-Loop Count reg */ -#define MDMA_S0_CURR_Y_COUNT 0xFFC00F78 /*MemDMA2 Stream 0 Src Current Outer-Loop Count reg */ -#define MDMA_S0_IRQ_STATUS 0xFFC00F68 /*MemDMA2 Stream 0 Source Interrupt/Status Register */ -#define MDMA_S0_PERIPHERAL_MAP 0xFFC00F6C /*MemDMA2 Stream 0 Source Peripheral Map register */ - -#define MDMA_D1_CONFIG 0xFFC00F88 /*MemDMA2 Stream 1 Destination Configuration register */ -#define MDMA_D1_NEXT_DESC_PTR 0xFFC00F80 /*MemDMA2 Stream 1 Destination Next Descriptor Ptr Reg */ -#define MDMA_D1_START_ADDR 0xFFC00F84 /*MemDMA2 Stream 1 Destination Start Address */ -#define MDMA_D1_X_COUNT 0xFFC00F90 /*MemDMA2 Stream 1 Dest Inner-Loop Count register */ -#define MDMA_D1_Y_COUNT 0xFFC00F98 /*MemDMA2 Stream 1 Dest Outer-Loop Count register */ -#define MDMA_D1_X_MODIFY 0xFFC00F94 /*MemDMA2 Stream 1 Dest Inner-Loop Address-Increment */ -#define MDMA_D1_Y_MODIFY 0xFFC00F9C /*MemDMA2 Stream 1 Dest Outer-Loop Address-Increment */ -#define MDMA_D1_CURR_DESC_PTR 0xFFC00FA0 /*MemDMA2 Stream 1 Destination Current Descriptor Ptr */ -#define MDMA_D1_CURR_ADDR 0xFFC00FA4 /*MemDMA2 Stream 1 Destination Current Address reg */ -#define MDMA_D1_CURR_X_COUNT 0xFFC00FB0 /*MemDMA2 Stream 1 Dest Current Inner-Loop Count reg */ -#define MDMA_D1_CURR_Y_COUNT 0xFFC00FB8 /*MemDMA2 Stream 1 Dest Current Outer-Loop Count reg */ -#define MDMA_D1_IRQ_STATUS 0xFFC00FA8 /*MemDMA2 Stream 1 Destination Interrupt/Status Reg */ -#define MDMA_D1_PERIPHERAL_MAP 0xFFC00FAC /*MemDMA2 Stream 1 Destination Peripheral Map register */ - -#define MDMA_S1_CONFIG 0xFFC00FC8 /*MemDMA2 Stream 1 Source Configuration register */ -#define MDMA_S1_NEXT_DESC_PTR 0xFFC00FC0 /*MemDMA2 Stream 1 Source Next Descriptor Ptr Reg */ -#define MDMA_S1_START_ADDR 0xFFC00FC4 /*MemDMA2 Stream 1 Source Start Address */ -#define MDMA_S1_X_COUNT 0xFFC00FD0 /*MemDMA2 Stream 1 Source Inner-Loop Count register */ -#define MDMA_S1_Y_COUNT 0xFFC00FD8 /*MemDMA2 Stream 1 Source Outer-Loop Count register */ -#define MDMA_S1_X_MODIFY 0xFFC00FD4 /*MemDMA2 Stream 1 Src Inner-Loop Address-Increment */ -#define MDMA_S1_Y_MODIFY 0xFFC00FDC /*MemDMA2 Stream 1 Source Outer-Loop Address-Increment */ -#define MDMA_S1_CURR_DESC_PTR 0xFFC00FE0 /*MemDMA2 Stream 1 Source Current Descriptor Ptr reg */ -#define MDMA_S1_CURR_ADDR 0xFFC00FE4 /*MemDMA2 Stream 1 Source Current Address */ -#define MDMA_S1_CURR_X_COUNT 0xFFC00FF0 /*MemDMA2 Stream 1 Source Current Inner-Loop Count */ -#define MDMA_S1_CURR_Y_COUNT 0xFFC00FF8 /*MemDMA2 Stream 1 Source Current Outer-Loop Count */ -#define MDMA_S1_IRQ_STATUS 0xFFC00FE8 /*MemDMA2 Stream 1 Source Interrupt/Status Register */ -#define MDMA_S1_PERIPHERAL_MAP 0xFFC00FEC /*MemDMA2 Stream 1 Source Peripheral Map register */ +#define MDMA_D2_CONFIG 0xFFC00F08 /*MemDMA2 Stream 0 Destination Configuration register */ +#define MDMA_D2_NEXT_DESC_PTR 0xFFC00F00 /*MemDMA2 Stream 0 Destination Next Descriptor Ptr Reg */ +#define MDMA_D2_START_ADDR 0xFFC00F04 /*MemDMA2 Stream 0 Destination Start Address */ +#define MDMA_D2_X_COUNT 0xFFC00F10 /*MemDMA2 Stream 0 Dest Inner-Loop Count register */ +#define MDMA_D2_Y_COUNT 0xFFC00F18 /*MemDMA2 Stream 0 Dest Outer-Loop Count register */ +#define MDMA_D2_X_MODIFY 0xFFC00F14 /*MemDMA2 Stream 0 Dest Inner-Loop Address-Increment */ +#define MDMA_D2_Y_MODIFY 0xFFC00F1C /*MemDMA2 Stream 0 Dest Outer-Loop Address-Increment */ +#define MDMA_D2_CURR_DESC_PTR 0xFFC00F20 /*MemDMA2 Stream 0 Dest Current Descriptor Ptr reg */ +#define MDMA_D2_CURR_ADDR 0xFFC00F24 /*MemDMA2 Stream 0 Destination Current Address */ +#define MDMA_D2_CURR_X_COUNT 0xFFC00F30 /*MemDMA2 Stream 0 Dest Current Inner-Loop Count reg */ +#define MDMA_D2_CURR_Y_COUNT 0xFFC00F38 /*MemDMA2 Stream 0 Dest Current Outer-Loop Count reg */ +#define MDMA_D2_IRQ_STATUS 0xFFC00F28 /*MemDMA2 Stream 0 Dest Interrupt/Status Register */ +#define MDMA_D2_PERIPHERAL_MAP 0xFFC00F2C /*MemDMA2 Stream 0 Destination Peripheral Map register */ + +#define MDMA_S2_CONFIG 0xFFC00F48 /*MemDMA2 Stream 0 Source Configuration register */ +#define MDMA_S2_NEXT_DESC_PTR 0xFFC00F40 /*MemDMA2 Stream 0 Source Next Descriptor Ptr Reg */ +#define MDMA_S2_START_ADDR 0xFFC00F44 /*MemDMA2 Stream 0 Source Start Address */ +#define MDMA_S2_X_COUNT 0xFFC00F50 /*MemDMA2 Stream 0 Source Inner-Loop Count register */ +#define MDMA_S2_Y_COUNT 0xFFC00F58 /*MemDMA2 Stream 0 Source Outer-Loop Count register */ +#define MDMA_S2_X_MODIFY 0xFFC00F54 /*MemDMA2 Stream 0 Src Inner-Loop Addr-Increment reg */ +#define MDMA_S2_Y_MODIFY 0xFFC00F5C /*MemDMA2 Stream 0 Src Outer-Loop Addr-Increment reg */ +#define MDMA_S2_CURR_DESC_PTR 0xFFC00F60 /*MemDMA2 Stream 0 Source Current Descriptor Ptr reg */ +#define MDMA_S2_CURR_ADDR 0xFFC00F64 /*MemDMA2 Stream 0 Source Current Address */ +#define MDMA_S2_CURR_X_COUNT 0xFFC00F70 /*MemDMA2 Stream 0 Src Current Inner-Loop Count reg */ +#define MDMA_S2_CURR_Y_COUNT 0xFFC00F78 /*MemDMA2 Stream 0 Src Current Outer-Loop Count reg */ +#define MDMA_S2_IRQ_STATUS 0xFFC00F68 /*MemDMA2 Stream 0 Source Interrupt/Status Register */ +#define MDMA_S2_PERIPHERAL_MAP 0xFFC00F6C /*MemDMA2 Stream 0 Source Peripheral Map register */ + +#define MDMA_D3_CONFIG 0xFFC00F88 /*MemDMA2 Stream 1 Destination Configuration register */ +#define MDMA_D3_NEXT_DESC_PTR 0xFFC00F80 /*MemDMA2 Stream 1 Destination Next Descriptor Ptr Reg */ +#define MDMA_D3_START_ADDR 0xFFC00F84 /*MemDMA2 Stream 1 Destination Start Address */ +#define MDMA_D3_X_COUNT 0xFFC00F90 /*MemDMA2 Stream 1 Dest Inner-Loop Count register */ +#define MDMA_D3_Y_COUNT 0xFFC00F98 /*MemDMA2 Stream 1 Dest Outer-Loop Count register */ +#define MDMA_D3_X_MODIFY 0xFFC00F94 /*MemDMA2 Stream 1 Dest Inner-Loop Address-Increment */ +#define MDMA_D3_Y_MODIFY 0xFFC00F9C /*MemDMA2 Stream 1 Dest Outer-Loop Address-Increment */ +#define MDMA_D3_CURR_DESC_PTR 0xFFC00FA0 /*MemDMA2 Stream 1 Destination Current Descriptor Ptr */ +#define MDMA_D3_CURR_ADDR 0xFFC00FA4 /*MemDMA2 Stream 1 Destination Current Address reg */ +#define MDMA_D3_CURR_X_COUNT 0xFFC00FB0 /*MemDMA2 Stream 1 Dest Current Inner-Loop Count reg */ +#define MDMA_D3_CURR_Y_COUNT 0xFFC00FB8 /*MemDMA2 Stream 1 Dest Current Outer-Loop Count reg */ +#define MDMA_D3_IRQ_STATUS 0xFFC00FA8 /*MemDMA2 Stream 1 Destination Interrupt/Status Reg */ +#define MDMA_D3_PERIPHERAL_MAP 0xFFC00FAC /*MemDMA2 Stream 1 Destination Peripheral Map register */ + +#define MDMA_S3_CONFIG 0xFFC00FC8 /*MemDMA2 Stream 1 Source Configuration register */ +#define MDMA_S3_NEXT_DESC_PTR 0xFFC00FC0 /*MemDMA2 Stream 1 Source Next Descriptor Ptr Reg */ +#define MDMA_S3_START_ADDR 0xFFC00FC4 /*MemDMA2 Stream 1 Source Start Address */ +#define MDMA_S3_X_COUNT 0xFFC00FD0 /*MemDMA2 Stream 1 Source Inner-Loop Count register */ +#define MDMA_S3_Y_COUNT 0xFFC00FD8 /*MemDMA2 Stream 1 Source Outer-Loop Count register */ +#define MDMA_S3_X_MODIFY 0xFFC00FD4 /*MemDMA2 Stream 1 Src Inner-Loop Address-Increment */ +#define MDMA_S3_Y_MODIFY 0xFFC00FDC /*MemDMA2 Stream 1 Source Outer-Loop Address-Increment */ +#define MDMA_S3_CURR_DESC_PTR 0xFFC00FE0 /*MemDMA2 Stream 1 Source Current Descriptor Ptr reg */ +#define MDMA_S3_CURR_ADDR 0xFFC00FE4 /*MemDMA2 Stream 1 Source Current Address */ +#define MDMA_S3_CURR_X_COUNT 0xFFC00FF0 /*MemDMA2 Stream 1 Source Current Inner-Loop Count */ +#define MDMA_S3_CURR_Y_COUNT 0xFFC00FF8 /*MemDMA2 Stream 1 Source Current Outer-Loop Count */ +#define MDMA_S3_IRQ_STATUS 0xFFC00FE8 /*MemDMA2 Stream 1 Source Interrupt/Status Register */ +#define MDMA_S3_PERIPHERAL_MAP 0xFFC00FEC /*MemDMA2 Stream 1 Source Peripheral Map register */ /* Internal Memory DMA Registers (0xFFC0_1800 - 0xFFC0_19FF) */ #define IMDMA_D0_CONFIG 0xFFC01808 /*IMDMA Stream 0 Destination Configuration */ @@ -879,6 +879,13 @@ #define DLENGTH 0x00003800 /* PPI Data Length */ #define DLEN_8 0x0 /* PPI Data Length mask for DLEN=8 */ #define DLEN(x) (((x-9) & 0x07) << 11) /* PPI Data Length (only works for x=10-->x=16) */ +#define DLEN_10 0x00000800 /* Data Length = 10 Bits */ +#define DLEN_11 0x00001000 /* Data Length = 11 Bits */ +#define DLEN_12 0x00001800 /* Data Length = 12 Bits */ +#define DLEN_13 0x00002000 /* Data Length = 13 Bits */ +#define DLEN_14 0x00002800 /* Data Length = 14 Bits */ +#define DLEN_15 0x00003000 /* Data Length = 15 Bits */ +#define DLEN_16 0x00003800 /* Data Length = 16 Bits */ #define POL 0x0000C000 /* PPI Signal Polarities */ #define POLC 0x4000 /* PPI Clock Polarity */ #define POLS 0x8000 /* PPI Frame Sync Polarity */ diff --git a/arch/blackfin/mach-bf561/smp.c b/arch/blackfin/mach-bf561/smp.c index ab1c617b9cf..11789beca75 100644 --- a/arch/blackfin/mach-bf561/smp.c +++ b/arch/blackfin/mach-bf561/smp.c @@ -48,7 +48,7 @@ int __init setup_profiling_timer(unsigned int multiplier) /* not supported */ return -EINVAL; } -void __cpuinit platform_secondary_init(unsigned int cpu) +void platform_secondary_init(unsigned int cpu) { /* Clone setup for peripheral interrupt sources from CoreA. */ bfin_write_SICB_IMASK0(bfin_read_SIC_IMASK0()); @@ -69,12 +69,11 @@ void __cpuinit platform_secondary_init(unsigned int cpu) SSYNC(); /* We are done with local CPU inits, unblock the boot CPU. */ - set_cpu_online(cpu, true); spin_lock(&boot_lock); spin_unlock(&boot_lock); } -int __cpuinit platform_boot_secondary(unsigned int cpu, struct task_struct *idle) +int platform_boot_secondary(unsigned int cpu, struct task_struct *idle) { unsigned long timeout; @@ -91,7 +90,9 @@ int __cpuinit platform_boot_secondary(unsigned int cpu, struct task_struct *idle SSYNC(); } - timeout = jiffies + 1 * HZ; + timeout = jiffies + HZ; + /* release the lock and let coreb run */ + spin_unlock(&boot_lock); while (time_before(jiffies, timeout)) { if (cpu_online(cpu)) break; @@ -100,8 +101,6 @@ int __cpuinit platform_boot_secondary(unsigned int cpu, struct task_struct *idle } if (cpu_online(cpu)) { - /* release the lock and let coreb run */ - spin_unlock(&boot_lock); return 0; } else panic("CPU%u: processor failed to boot\n", cpu); @@ -155,7 +154,7 @@ void platform_clear_ipi(unsigned int cpu, int irq) * Setup core B's local core timer. * In SMP, core timer is used for clock event device. */ -void __cpuinit bfin_local_timer_setup(void) +void bfin_local_timer_setup(void) { #if defined(CONFIG_TICKSOURCE_CORETMR) struct irq_data *data = irq_get_irq_data(IRQ_CORETMR); diff --git a/arch/blackfin/mach-bf609/Kconfig b/arch/blackfin/mach-bf609/Kconfig new file mode 100644 index 00000000000..6584190faeb --- /dev/null +++ b/arch/blackfin/mach-bf609/Kconfig @@ -0,0 +1,1683 @@ +config BF60x + def_bool y + depends on (BF609) + select IRQ_PREFLOW_FASTEOI + +if (BF60x) + +source "arch/blackfin/mach-bf609/boards/Kconfig" + +menu "BF609 Specific Configuration" + +config SEC_IRQ_PRIORITY_LEVELS + int "SEC interrupt priority levels" + default 7 + range 0 7 + help + Divide the total number of interrupt priority levels into sub-levels. + There is 2 ^ (SEC_IRQ_PRIORITY_LEVELS + 1) different levels. + +config L1_PARITY_CHECK + bool "Enable L1 parity check" + default n + help + Enable the L1 parity check in L1 sram. A fault event is raised + when L1 parity error is found. + +comment "System Cross Bar Priority Assignment" + +config SCB_PRIORITY + bool "Init System Cross Bar Priority" + default n + +menuconfig SCB0_MI0 + bool "SCB0 Master Interface 0 (DDR)" + default n + depends on SCB_PRIORITY + help + The slave interface id of each slot should be set according following table. + Core 0 -- 0 + Core 1 -- 2 + SCB1 -- 9 + SCB2 -- 10 + SCB3 -- 11 + SCB4 -- 12 + SCB5 -- 5 + SCB6 -- 6 + SCB7 -- 8 + SCB8 -- 7 + SCB9 -- 4 + USB -- 13 + +if SCB0_MI0 + +config SCB0_MI0_SLOT0 + int "Slot 0 slave interface id" + default 0 + range 0 13 + +config SCB0_MI0_SLOT1 + int "Slot 1 slave interface id" + default 2 + range 0 13 + +config SCB0_MI0_SLOT2 + int "Slot 2 slave interface id" + default 4 + range 0 13 + +config SCB0_MI0_SLOT3 + int "Slot 3 slave interface id" + default 5 + range 0 13 + +config SCB0_MI0_SLOT4 + int "Slot 4 slave interface id" + default 6 + range 0 13 + +config SCB0_MI0_SLOT5 + int "Slot 5 slave interface id" + default 7 + range 0 13 + +config SCB0_MI0_SLOT6 + int "Slot 6 slave interface id" + default 8 + range 0 13 + +config SCB0_MI0_SLOT7 + int "Slot 7 slave interface id" + default 9 + range 0 13 + +config SCB0_MI0_SLOT8 + int "Slot 8 slave interface id" + default 10 + range 0 13 + +config SCB0_MI0_SLOT9 + int "Slot 9 slave interface id" + default 11 + range 0 13 + +config SCB0_MI0_SLOT10 + int "Slot 10 slave interface id" + default 13 + range 0 13 + +config SCB0_MI0_SLOT11 + int "Slot 11 slave interface id" + default 12 + range 0 13 + +config SCB0_MI0_SLOT12 + int "Slot 12 slave interface id" + default 0 + range 0 13 + +config SCB0_MI0_SLOT13 + int "Slot 13 slave interface id" + default 2 + range 0 13 + +config SCB0_MI0_SLOT14 + int "Slot 14 slave interface id" + default 4 + range 0 13 + +config SCB0_MI0_SLOT15 + int "Slot 15 slave interface id" + default 5 + range 0 13 + +config SCB0_MI0_SLOT16 + int "Slot 16 slave interface id" + default 6 + range 0 13 + +config SCB0_MI0_SLOT17 + int "Slot 17 slave interface id" + default 7 + range 0 13 + +config SCB0_MI0_SLOT18 + int "Slot 18 slave interface id" + default 8 + range 0 13 + +config SCB0_MI0_SLOT19 + int "Slot 19 slave interface id" + default 9 + range 0 13 + +config SCB0_MI0_SLOT20 + int "Slot 20 slave interface id" + default 10 + range 0 13 + +config SCB0_MI0_SLOT21 + int "Slot 21 slave interface id" + default 11 + range 0 13 + +config SCB0_MI0_SLOT22 + int "Slot 22 slave interface id" + default 13 + range 0 13 + +config SCB0_MI0_SLOT23 + int "Slot 23 slave interface id" + default 12 + range 0 13 + +config SCB0_MI0_SLOT24 + int "Slot 24 slave interface id" + default 0 + range 0 13 + +config SCB0_MI0_SLOT25 + int "Slot 25 slave interface id" + default 2 + range 0 13 + +config SCB0_MI0_SLOT26 + int "Slot 26 slave interface id" + default 4 + range 0 13 + +config SCB0_MI0_SLOT27 + int "Slot 27 slave interface id" + default 5 + range 0 13 + +config SCB0_MI0_SLOT28 + int "Slot 28 slave interface id" + default 6 + range 0 13 + +config SCB0_MI0_SLOT29 + int "Slot 29 slave interface id" + default 7 + range 0 13 + +config SCB0_MI0_SLOT30 + int "Slot 30 slave interface id" + default 8 + range 0 13 + +config SCB0_MI0_SLOT31 + int "Slot 31 slave interface id" + default 13 + range 0 13 + +endif # SCB0_MI0 + +menuconfig SCB0_MI1 + bool "SCB0 Master Interface 1 (SMC)" + default n + depends on SCB_PRIORITY + help + The slave interface id of each slot should be set according following table. + Core 0 -- 0 + Core 1 -- 2 + SCB1 -- 9 + SCB2 -- 10 + SCB3 -- 11 + SCB4 -- 12 + SCB5 -- 5 + SCB6 -- 6 + SCB7 -- 8 + SCB8 -- 7 + SCB9 -- 4 + USB -- 13 + +if SCB0_MI1 + +config SCB0_MI1_SLOT0 + int "Slot 0 slave interface id" + default 0 + range 0 13 + +config SCB0_MI1_SLOT1 + int "Slot 1 slave interface id" + default 2 + range 0 13 + +config SCB0_MI1_SLOT2 + int "Slot 2 slave interface id" + default 4 + range 0 13 + +config SCB0_MI1_SLOT3 + int "Slot 3 slave interface id" + default 5 + range 0 13 + +config SCB0_MI1_SLOT4 + int "Slot 4 slave interface id" + default 6 + range 0 13 + +config SCB0_MI1_SLOT5 + int "Slot 5 slave interface id" + default 7 + range 0 13 + +config SCB0_MI1_SLOT6 + int "Slot 6 slave interface id" + default 8 + range 0 13 + +config SCB0_MI1_SLOT7 + int "Slot 7 slave interface id" + default 9 + range 0 13 + +config SCB0_MI1_SLOT8 + int "Slot 8 slave interface id" + default 10 + range 0 13 + +config SCB0_MI1_SLOT9 + int "Slot 9 slave interface id" + default 11 + range 0 13 + +config SCB0_MI1_SLOT10 + int "Slot 10 slave interface id" + default 13 + range 0 13 + +config SCB0_MI1_SLOT11 + int "Slot 11 slave interface id" + default 12 + range 0 13 + +config SCB0_MI1_SLOT12 + int "Slot 12 slave interface id" + default 0 + range 0 13 + +config SCB0_MI1_SLOT13 + int "Slot 13 slave interface id" + default 2 + range 0 13 + +config SCB0_MI1_SLOT14 + int "Slot 14 slave interface id" + default 4 + range 0 13 + +config SCB0_MI1_SLOT15 + int "Slot 15 slave interface id" + default 5 + range 0 13 + +config SCB0_MI1_SLOT16 + int "Slot 16 slave interface id" + default 6 + range 0 13 + +config SCB0_MI1_SLOT17 + int "Slot 17 slave interface id" + default 7 + range 0 13 + +config SCB0_MI1_SLOT18 + int "Slot 18 slave interface id" + default 8 + range 0 13 + +config SCB0_MI1_SLOT19 + int "Slot 19 slave interface id" + default 9 + range 0 13 + +config SCB0_MI1_SLOT20 + int "Slot 20 slave interface id" + default 10 + range 0 13 + +config SCB0_MI1_SLOT21 + int "Slot 21 slave interface id" + default 11 + range 0 13 + +config SCB0_MI1_SLOT22 + int "Slot 22 slave interface id" + default 13 + range 0 13 + +config SCB0_MI1_SLOT23 + int "Slot 23 slave interface id" + default 12 + range 0 13 + +config SCB0_MI1_SLOT24 + int "Slot 24 slave interface id" + default 0 + range 0 13 + +config SCB0_MI1_SLOT25 + int "Slot 25 slave interface id" + default 2 + range 0 13 + +config SCB0_MI1_SLOT26 + int "Slot 26 slave interface id" + default 4 + range 0 13 + +config SCB0_MI1_SLOT27 + int "Slot 27 slave interface id" + default 5 + range 0 13 + +config SCB0_MI1_SLOT28 + int "Slot 28 slave interface id" + default 6 + range 0 13 + +config SCB0_MI1_SLOT29 + int "Slot 29 slave interface id" + default 7 + range 0 13 + +config SCB0_MI1_SLOT30 + int "Slot 30 slave interface id" + default 8 + range 0 13 + +config SCB0_MI1_SLOT31 + int "Slot 31 slave interface id" + default 13 + range 0 13 + +endif # SCB0_MI1 + +menuconfig SCB0_MI2 + bool "SCB0 Master Interface 2 (Data L2)" + default n + depends on SCB_PRIORITY + help + The slave interface id of each slot should be set according following table. + Core 0 -- 0 + Core 1 -- 2 + SCB1 -- 9 + SCB2 -- 10 + SCB3 -- 11 + SCB4 -- 12 + SCB5 -- 5 + SCB6 -- 6 + SCB7 -- 8 + SCB8 -- 7 + SCB9 -- 4 + USB -- 13 + +if SCB0_MI2 + +config SCB0_MI2_SLOT0 + int "Slot 0 slave interface id" + default 4 + range 0 13 + +config SCB0_MI2_SLOT1 + int "Slot 1 slave interface id" + default 5 + range 0 13 + +config SCB0_MI2_SLOT2 + int "Slot 2 slave interface id" + default 6 + range 0 13 + +config SCB0_MI2_SLOT3 + int "Slot 3 slave interface id" + default 7 + range 0 13 + +config SCB0_MI2_SLOT4 + int "Slot 4 slave interface id" + default 8 + range 0 13 + +config SCB0_MI2_SLOT5 + int "Slot 5 slave interface id" + default 9 + range 0 13 + +config SCB0_MI2_SLOT6 + int "Slot 6 slave interface id" + default 10 + range 0 13 + +config SCB0_MI2_SLOT7 + int "Slot 7 slave interface id" + default 11 + range 0 13 + +config SCB0_MI2_SLOT8 + int "Slot 8 slave interface id" + default 13 + range 0 13 + +config SCB0_MI2_SLOT9 + int "Slot 9 slave interface id" + default 12 + range 0 13 + +config SCB0_MI2_SLOT10 + int "Slot 10 slave interface id" + default 4 + range 0 13 + +config SCB0_MI2_SLOT11 + int "Slot 11 slave interface id" + default 5 + range 0 13 + +config SCB0_MI2_SLOT12 + int "Slot 12 slave interface id" + default 6 + range 0 13 + +config SCB0_MI2_SLOT13 + int "Slot 13 slave interface id" + default 7 + range 0 13 + +config SCB0_MI2_SLOT14 + int "Slot 14 slave interface id" + default 8 + range 0 13 + +config SCB0_MI2_SLOT15 + int "Slot 15 slave interface id" + default 9 + range 0 13 + +config SCB0_MI2_SLOT16 + int "Slot 16 slave interface id" + default 10 + range 0 13 + +config SCB0_MI2_SLOT17 + int "Slot 17 slave interface id" + default 11 + range 0 13 + +config SCB0_MI2_SLOT18 + int "Slot 18 slave interface id" + default 13 + range 0 13 + +config SCB0_MI2_SLOT19 + int "Slot 19 slave interface id" + default 12 + range 0 13 + +config SCB0_MI2_SLOT20 + int "Slot 20 slave interface id" + default 4 + range 0 13 + +config SCB0_MI2_SLOT21 + int "Slot 21 slave interface id" + default 5 + range 0 13 + +config SCB0_MI2_SLOT22 + int "Slot 22 slave interface id" + default 6 + range 0 13 + +config SCB0_MI2_SLOT23 + int "Slot 23 slave interface id" + default 7 + range 0 13 + +config SCB0_MI2_SLOT24 + int "Slot 24 slave interface id" + default 8 + range 0 13 + +config SCB0_MI2_SLOT25 + int "Slot 25 slave interface id" + default 9 + range 0 13 + +config SCB0_MI2_SLOT26 + int "Slot 26 slave interface id" + default 10 + range 0 13 + +config SCB0_MI2_SLOT27 + int "Slot 27 slave interface id" + default 11 + range 0 13 + +config SCB0_MI2_SLOT28 + int "Slot 28 slave interface id" + default 13 + range 0 13 + +config SCB0_MI2_SLOT29 + int "Slot 29 slave interface id" + default 12 + range 0 13 + +config SCB0_MI2_SLOT30 + int "Slot 30 slave interface id" + default 4 + range 0 13 + +config SCB0_MI2_SLOT31 + int "Slot 31 slave interface id" + default 7 + range 0 13 + +endif # SCB0_MI2 + +menuconfig SCB0_MI3 + bool "SCB0 Master Interface 3 (L1A)" + default n + depends on SCB_PRIORITY + help + The slave interface id of each slot should be set according following table. + Core 0 -- 0 + Core 1 -- 2 + SCB1 -- 9 + SCB2 -- 10 + SCB3 -- 11 + SCB4 -- 12 + SCB5 -- 5 + SCB6 -- 6 + SCB7 -- 8 + SCB8 -- 7 + SCB9 -- 4 + USB -- 13 + +if SCB0_MI3 + +config SCB0_MI3_SLOT0 + int "Slot 0 slave interface id" + default 4 + range 0 13 + +config SCB0_MI3_SLOT1 + int "Slot 1 slave interface id" + default 5 + range 0 13 + +config SCB0_MI3_SLOT2 + int "Slot 2 slave interface id" + default 6 + range 0 13 + +config SCB0_MI3_SLOT3 + int "Slot 3 slave interface id" + default 7 + range 0 13 + +config SCB0_MI3_SLOT4 + int "Slot 4 slave interface id" + default 8 + range 0 13 + +config SCB0_MI3_SLOT5 + int "Slot 5 slave interface id" + default 9 + range 0 13 + +config SCB0_MI3_SLOT6 + int "Slot 6 slave interface id" + default 10 + range 0 13 + +config SCB0_MI3_SLOT7 + int "Slot 7 slave interface id" + default 11 + range 0 13 + +config SCB0_MI3_SLOT8 + int "Slot 8 slave interface id" + default 13 + range 0 13 + +config SCB0_MI3_SLOT9 + int "Slot 9 slave interface id" + default 12 + range 0 13 + +config SCB0_MI3_SLOT10 + int "Slot 10 slave interface id" + default 4 + range 0 13 + +config SCB0_MI3_SLOT11 + int "Slot 11 slave interface id" + default 5 + range 0 13 + +config SCB0_MI3_SLOT12 + int "Slot 12 slave interface id" + default 6 + range 0 13 + +config SCB0_MI3_SLOT13 + int "Slot 13 slave interface id" + default 7 + range 0 13 + +config SCB0_MI3_SLOT14 + int "Slot 14 slave interface id" + default 8 + range 0 13 + +config SCB0_MI3_SLOT15 + int "Slot 15 slave interface id" + default 9 + range 0 13 + +config SCB0_MI3_SLOT16 + int "Slot 16 slave interface id" + default 10 + range 0 13 + +config SCB0_MI3_SLOT17 + int "Slot 17 slave interface id" + default 11 + range 0 13 + +config SCB0_MI3_SLOT18 + int "Slot 18 slave interface id" + default 13 + range 0 13 + +config SCB0_MI3_SLOT19 + int "Slot 19 slave interface id" + default 12 + range 0 13 + +config SCB0_MI3_SLOT20 + int "Slot 20 slave interface id" + default 4 + range 0 13 + +config SCB0_MI3_SLOT21 + int "Slot 21 slave interface id" + default 5 + range 0 13 + +config SCB0_MI3_SLOT22 + int "Slot 22 slave interface id" + default 6 + range 0 13 + +config SCB0_MI3_SLOT23 + int "Slot 23 slave interface id" + default 7 + range 0 13 + +config SCB0_MI3_SLOT24 + int "Slot 24 slave interface id" + default 8 + range 0 13 + +config SCB0_MI3_SLOT25 + int "Slot 25 slave interface id" + default 9 + range 0 13 + +config SCB0_MI3_SLOT26 + int "Slot 26 slave interface id" + default 10 + range 0 13 + +config SCB0_MI3_SLOT27 + int "Slot 27 slave interface id" + default 11 + range 0 13 + +config SCB0_MI3_SLOT28 + int "Slot 28 slave interface id" + default 13 + range 0 13 + +config SCB0_MI3_SLOT29 + int "Slot 29 slave interface id" + default 12 + range 0 13 + +config SCB0_MI3_SLOT30 + int "Slot 30 slave interface id" + default 4 + range 0 13 + +config SCB0_MI3_SLOT31 + int "Slot 31 slave interface id" + default 7 + range 0 13 + +endif # SCB0_MI3 + +menuconfig SCB0_MI4 + bool "SCB0 Master Interface 4 (L1B)" + default n + depends on SCB_PRIORITY + help + The slave interface id of each slot should be set according following table. + Core 0 -- 0 + Core 1 -- 2 + SCB1 -- 9 + SCB2 -- 10 + SCB3 -- 11 + SCB4 -- 12 + SCB5 -- 5 + SCB6 -- 6 + SCB7 -- 8 + SCB8 -- 7 + SCB9 -- 4 + USB -- 13 + +if SCB0_MI4 + +config SCB0_MI4_SLOT0 + int "Slot 0 slave interface id" + default 4 + range 0 13 + +config SCB0_MI4_SLOT1 + int "Slot 1 slave interface id" + default 5 + range 0 13 + +config SCB0_MI4_SLOT2 + int "Slot 2 slave interface id" + default 6 + range 0 13 + +config SCB0_MI4_SLOT3 + int "Slot 3 slave interface id" + default 7 + range 0 13 + +config SCB0_MI4_SLOT4 + int "Slot 4 slave interface id" + default 8 + range 0 13 + +config SCB0_MI4_SLOT5 + int "Slot 5 slave interface id" + default 9 + range 0 13 + +config SCB0_MI4_SLOT6 + int "Slot 6 slave interface id" + default 10 + range 0 13 + +config SCB0_MI4_SLOT7 + int "Slot 7 slave interface id" + default 11 + range 0 13 + +config SCB0_MI4_SLOT8 + int "Slot 8 slave interface id" + default 13 + range 0 13 + +config SCB0_MI4_SLOT9 + int "Slot 9 slave interface id" + default 12 + range 0 13 + +config SCB0_MI4_SLOT10 + int "Slot 10 slave interface id" + default 4 + range 0 13 + +config SCB0_MI4_SLOT11 + int "Slot 11 slave interface id" + default 5 + range 0 13 + +config SCB0_MI4_SLOT12 + int "Slot 12 slave interface id" + default 6 + range 0 13 + +config SCB0_MI4_SLOT13 + int "Slot 13 slave interface id" + default 7 + range 0 13 + +config SCB0_MI4_SLOT14 + int "Slot 14 slave interface id" + default 8 + range 0 13 + +config SCB0_MI4_SLOT15 + int "Slot 15 slave interface id" + default 9 + range 0 13 + +config SCB0_MI4_SLOT16 + int "Slot 16 slave interface id" + default 10 + range 0 13 + +config SCB0_MI4_SLOT17 + int "Slot 17 slave interface id" + default 11 + range 0 13 + +config SCB0_MI4_SLOT18 + int "Slot 18 slave interface id" + default 13 + range 0 13 + +config SCB0_MI4_SLOT19 + int "Slot 19 slave interface id" + default 12 + range 0 13 + +config SCB0_MI4_SLOT20 + int "Slot 20 slave interface id" + default 4 + range 0 13 + +config SCB0_MI4_SLOT21 + int "Slot 21 slave interface id" + default 5 + range 0 13 + +config SCB0_MI4_SLOT22 + int "Slot 22 slave interface id" + default 6 + range 0 13 + +config SCB0_MI4_SLOT23 + int "Slot 23 slave interface id" + default 7 + range 0 13 + +config SCB0_MI4_SLOT24 + int "Slot 24 slave interface id" + default 8 + range 0 13 + +config SCB0_MI4_SLOT25 + int "Slot 25 slave interface id" + default 9 + range 0 13 + +config SCB0_MI4_SLOT26 + int "Slot 26 slave interface id" + default 10 + range 0 13 + +config SCB0_MI4_SLOT27 + int "Slot 27 slave interface id" + default 11 + range 0 13 + +config SCB0_MI4_SLOT28 + int "Slot 28 slave interface id" + default 13 + range 0 13 + +config SCB0_MI4_SLOT29 + int "Slot 29 slave interface id" + default 12 + range 0 13 + +config SCB0_MI4_SLOT30 + int "Slot 30 slave interface id" + default 4 + range 0 13 + +config SCB0_MI4_SLOT31 + int "Slot 31 slave interface id" + default 7 + range 0 13 + +endif # SCB0_MI4 + +menuconfig SCB0_MI5 + bool "SCB0 Master Interface 5 (SMMR)" + default n + depends on SCB_PRIORITY + help + The slave interface id of each slot should be set according following table. + MMR0 -- 1 + MMR1 -- 3 + SCB2 -- 10 + SCB4 -- 12 + +if SCB0_MI5 + +config SCB0_MI5_SLOT0 + int "Slot 0 slave interface id" + default 1 + range 0 13 + +config SCB0_MI5_SLOT1 + int "Slot 1 slave interface id" + default 3 + range 0 13 + +config SCB0_MI5_SLOT2 + int "Slot 2 slave interface id" + default 10 + range 0 13 + +config SCB0_MI5_SLOT3 + int "Slot 3 slave interface id" + default 12 + range 0 13 + +config SCB0_MI5_SLOT4 + int "Slot 4 slave interface id" + default 1 + range 0 13 + +config SCB0_MI5_SLOT5 + int "Slot 5 slave interface id" + default 3 + range 0 13 + +config SCB0_MI5_SLOT6 + int "Slot 6 slave interface id" + default 10 + range 0 13 + +config SCB0_MI5_SLOT7 + int "Slot 7 slave interface id" + default 12 + range 0 13 + +config SCB0_MI5_SLOT8 + int "Slot 8 slave interface id" + default 1 + range 0 13 + +config SCB0_MI5_SLOT9 + int "Slot 9 slave interface id" + default 3 + range 0 13 + +config SCB0_MI5_SLOT10 + int "Slot 10 slave interface id" + default 10 + range 0 13 + +config SCB0_MI5_SLOT11 + int "Slot 11 slave interface id" + default 12 + range 0 13 + +config SCB0_MI5_SLOT12 + int "Slot 12 slave interface id" + default 1 + range 0 13 + +config SCB0_MI5_SLOT13 + int "Slot 13 slave interface id" + default 3 + range 0 13 + +config SCB0_MI5_SLOT14 + int "Slot 14 slave interface id" + default 10 + range 0 13 + +config SCB0_MI5_SLOT15 + int "Slot 15 slave interface id" + default 12 + range 0 13 + +endif # SCB0_MI5 + +menuconfig SCB1_MI0 + bool "SCB1 Master Interface 0" + default n + depends on SCB_PRIORITY + help + The slave interface id of each slot should be set according following table. + SPORT0A -- 0 + SPORT0B -- 1 + SPORT1A -- 2 + SPORT1B -- 3 + SPORT2A -- 4 + SPORT2B -- 5 + SPI0TX -- 6 + SPI0RX -- 7 + SPI1TX -- 8 + SPI1RX -- 9 + +if SCB1_MI0 + +config SCB1_MI0_SLOT0 + int "Slot 0 slave interface id" + default 0 + range 0 9 + +config SCB1_MI0_SLOT1 + int "Slot 1 slave interface id" + default 1 + range 0 9 + +config SCB1_MI0_SLOT2 + int "Slot 2 slave interface id" + default 2 + range 0 9 + +config SCB1_MI0_SLOT3 + int "Slot 3 slave interface id" + default 3 + range 0 9 + +config SCB1_MI0_SLOT4 + int "Slot 4 slave interface id" + default 4 + range 0 9 + +config SCB1_MI0_SLOT5 + int "Slot 5 slave interface id" + default 5 + range 0 9 + +config SCB1_MI0_SLOT6 + int "Slot 6 slave interface id" + default 6 + range 0 9 + +config SCB1_MI0_SLOT7 + int "Slot 7 slave interface id" + default 7 + range 0 9 + +config SCB1_MI0_SLOT8 + int "Slot 8 slave interface id" + default 8 + range 0 9 + +config SCB1_MI0_SLOT9 + int "Slot 9 slave interface id" + default 9 + range 0 9 + +config SCB1_MI0_SLOT10 + int "Slot 10 slave interface id" + default 0 + range 0 9 + +config SCB1_MI0_SLOT11 + int "Slot 11 slave interface id" + default 1 + range 0 9 + +config SCB1_MI0_SLOT12 + int "Slot 12 slave interface id" + default 2 + range 0 9 + +config SCB1_MI0_SLOT13 + int "Slot 13 slave interface id" + default 3 + range 0 9 + +config SCB1_MI0_SLOT14 + int "Slot 14 slave interface id" + default 4 + range 0 9 + +config SCB1_MI0_SLOT15 + int "Slot 15 slave interface id" + default 5 + range 0 9 + +config SCB1_MI0_SLOT16 + int "Slot 16 slave interface id" + default 6 + range 0 13 + +config SCB1_MI0_SLOT17 + int "Slot 17 slave interface id" + default 7 + range 0 13 + +config SCB1_MI0_SLOT18 + int "Slot 18 slave interface id" + default 8 + range 0 13 + +config SCB1_MI0_SLOT19 + int "Slot 19 slave interface id" + default 9 + range 0 13 + +endif # SCB1_MI0 + +menuconfig SCB2_MI0 + bool "SCB2 Master Interface 0" + default n + depends on SCB_PRIORITY + help + The slave interface id of each slot should be set according following table. + RSI -- 0 + SDU DMA -- 1 + SDU -- 2 + EMAC0 -- 3 + EMAC1 -- 4 + +if SCB2_MI0 + +config SCB2_MI0_SLOT0 + int "Slot 0 slave interface id" + default 0 + range 0 4 + +config SCB2_MI0_SLOT1 + int "Slot 1 slave interface id" + default 1 + range 0 4 + +config SCB2_MI0_SLOT2 + int "Slot 2 slave interface id" + default 2 + range 0 4 + +config SCB2_MI0_SLOT3 + int "Slot 3 slave interface id" + default 3 + range 0 4 + +config SCB2_MI0_SLOT4 + int "Slot 4 slave interface id" + default 4 + range 0 4 + +config SCB2_MI0_SLOT5 + int "Slot 5 slave interface id" + default 0 + range 0 4 + +config SCB2_MI0_SLOT6 + int "Slot 6 slave interface id" + default 1 + range 0 4 + +config SCB2_MI0_SLOT7 + int "Slot 7 slave interface id" + default 2 + range 0 4 + +config SCB2_MI0_SLOT8 + int "Slot 8 slave interface id" + default 3 + range 0 4 + +config SCB2_MI0_SLOT9 + int "Slot 9 slave interface id" + default 4 + range 0 4 + +endif # SCB2_MI0 + +menuconfig SCB3_MI0 + bool "SCB3 Master Interface 0" + default n + depends on SCB_PRIORITY + help + The slave interface id of each slot should be set according following table. + LP0 -- 0 + LP1 -- 1 + LP2 -- 2 + LP3 -- 3 + UART0TX -- 4 + UART0RX -- 5 + UART1TX -- 4 + UART1RX -- 5 + +if SCB3_MI0 + +config SCB3_MI0_SLOT0 + int "Slot 0 slave interface id" + default 0 + range 0 7 + +config SCB3_MI0_SLOT1 + int "Slot 1 slave interface id" + default 1 + range 0 7 + +config SCB3_MI0_SLOT2 + int "Slot 2 slave interface id" + default 2 + range 0 7 + +config SCB3_MI0_SLOT3 + int "Slot 3 slave interface id" + default 3 + range 0 7 + +config SCB3_MI0_SLOT4 + int "Slot 4 slave interface id" + default 4 + range 0 7 + +config SCB3_MI0_SLOT5 + int "Slot 5 slave interface id" + default 5 + range 0 7 + +config SCB3_MI0_SLOT6 + int "Slot 6 slave interface id" + default 6 + range 0 7 + +config SCB3_MI0_SLOT7 + int "Slot 7 slave interface id" + default 7 + range 0 7 + +config SCB3_MI0_SLOT8 + int "Slot 8 slave interface id" + default 0 + range 0 7 + +config SCB3_MI0_SLOT9 + int "Slot 9 slave interface id" + default 1 + range 0 7 + +config SCB3_MI0_SLOT10 + int "Slot 10 slave interface id" + default 2 + range 0 7 + +config SCB3_MI0_SLOT11 + int "Slot 11 slave interface id" + default 3 + range 0 7 + +config SCB3_MI0_SLOT12 + int "Slot 12 slave interface id" + default 4 + range 0 7 + +config SCB3_MI0_SLOT13 + int "Slot 13 slave interface id" + default 5 + range 0 7 + +config SCB3_MI0_SLOT14 + int "Slot 14 slave interface id" + default 6 + range 0 7 + +config SCB3_MI0_SLOT15 + int "Slot 15 slave interface id" + default 7 + range 0 7 + +endif # SCB3_MI0 + +menuconfig SCB4_MI0 + bool "SCB4 Master Interface 0" + default n + depends on SCB_PRIORITY + help + The slave interface id of each slot should be set according following table. + MDA21 -- 0 + MDA22 -- 1 + MDA23 -- 2 + MDA24 -- 3 + MDA25 -- 4 + MDA26 -- 5 + MDA27 -- 6 + MDA28 -- 7 + +if SCB4_MI0 + +config SCB4_MI0_SLOT0 + int "Slot 0 slave interface id" + default 0 + range 0 7 + +config SCB4_MI0_SLOT1 + int "Slot 1 slave interface id" + default 1 + range 0 7 + +config SCB4_MI0_SLOT2 + int "Slot 2 slave interface id" + default 2 + range 0 7 + +config SCB4_MI0_SLOT3 + int "Slot 3 slave interface id" + default 3 + range 0 7 + +config SCB4_MI0_SLOT4 + int "Slot 4 slave interface id" + default 4 + range 0 7 + +config SCB4_MI0_SLOT5 + int "Slot 5 slave interface id" + default 5 + range 0 7 + +config SCB4_MI0_SLOT6 + int "Slot 6 slave interface id" + default 6 + range 0 7 + +config SCB4_MI0_SLOT7 + int "Slot 7 slave interface id" + default 7 + range 0 7 + +config SCB4_MI0_SLOT8 + int "Slot 8 slave interface id" + default 0 + range 0 7 + +config SCB4_MI0_SLOT9 + int "Slot 9 slave interface id" + default 1 + range 0 7 + +config SCB4_MI0_SLOT10 + int "Slot 10 slave interface id" + default 2 + range 0 7 + +config SCB4_MI0_SLOT11 + int "Slot 11 slave interface id" + default 3 + range 0 7 + +config SCB4_MI0_SLOT12 + int "Slot 12 slave interface id" + default 4 + range 0 7 + +config SCB4_MI0_SLOT13 + int "Slot 13 slave interface id" + default 5 + range 0 7 + +config SCB4_MI0_SLOT14 + int "Slot 14 slave interface id" + default 6 + range 0 7 + +config SCB4_MI0_SLOT15 + int "Slot 15 slave interface id" + default 7 + range 0 7 + +endif # SCB4_MI0 + +menuconfig SCB5_MI0 + bool "SCB5 Master Interface 0" + default n + depends on SCB_PRIORITY + help + The slave interface id of each slot should be set according following table. + PPI0 MDA29 -- 0 + PPI0 MDA30 -- 1 + PPI2 MDA31 -- 2 + PPI2 MDA32 -- 3 + +if SCB5_MI0 + +config SCB5_MI0_SLOT0 + int "Slot 0 slave interface id" + default 0 + range 0 3 + +config SCB5_MI0_SLOT1 + int "Slot 1 slave interface id" + default 1 + range 0 3 + +config SCB5_MI0_SLOT2 + int "Slot 2 slave interface id" + default 2 + range 0 3 + +config SCB5_MI0_SLOT3 + int "Slot 3 slave interface id" + default 3 + range 0 3 + +config SCB5_MI0_SLOT4 + int "Slot 4 slave interface id" + default 0 + range 0 3 + +config SCB5_MI0_SLOT5 + int "Slot 5 slave interface id" + default 1 + range 0 3 + +config SCB5_MI0_SLOT6 + int "Slot 6 slave interface id" + default 2 + range 0 3 + +config SCB5_MI0_SLOT7 + int "Slot 7 slave interface id" + default 3 + range 0 3 + +endif # SCB5_MI0 + +menuconfig SCB6_MI0 + bool "SCB6 Master Interface 0" + default n + depends on SCB_PRIORITY + help + The slave interface id of each slot should be set according following table. + PPI1 MDA33 -- 0 + PPI1 MDA34 -- 1 + +if SCB6_MI0 + +config SCB6_MI0_SLOT0 + int "Slot 0 slave interface id" + default 0 + range 0 1 + +config SCB6_MI0_SLOT1 + int "Slot 1 slave interface id" + default 1 + range 0 1 + +config SCB6_MI0_SLOT2 + int "Slot 2 slave interface id" + default 0 + range 0 1 + +config SCB6_MI0_SLOT3 + int "Slot 3 slave interface id" + default 1 + range 0 1 + +endif # SCB6_MI0 + +menuconfig SCB7_MI0 + bool "SCB7 Master Interface 0" + default n + depends on SCB_PRIORITY + help + The slave interface id of each slot should be set according following table. + PIXC0 -- 0 + PIXC1 -- 1 + PIXC2 -- 2 + +if SCB7_MI0 + +config SCB7_MI0_SLOT0 + int "Slot 0 slave interface id" + default 0 + range 0 2 + +config SCB7_MI0_SLOT1 + int "Slot 1 slave interface id" + default 1 + range 0 2 + +config SCB7_MI0_SLOT2 + int "Slot 2 slave interface id" + default 2 + range 0 2 + +config SCB7_MI0_SLOT3 + int "Slot 3 slave interface id" + default 0 + range 0 2 + +config SCB7_MI0_SLOT4 + int "Slot 4 slave interface id" + default 1 + range 0 2 + +config SCB7_MI0_SLOT5 + int "Slot 5 slave interface id" + default 2 + range 0 2 + +endif # SCB7_MI0 + +menuconfig SCB8_MI0 + bool "SCB8 Master Interface 0" + default n + depends on SCB_PRIORITY + help + The slave interface id of each slot should be set according following table. + PVP CPDOB -- 0 + PVP CPDOC -- 1 + PVP CPCO -- 2 + PVP CPCI -- 3 + +if SCB8_MI0 + +config SCB8_MI0_SLOT0 + int "Slot 0 slave interface id" + default 0 + range 0 3 + +config SCB8_MI0_SLOT1 + int "Slot 1 slave interface id" + default 1 + range 0 3 + +config SCB8_MI0_SLOT2 + int "Slot 2 slave interface id" + default 2 + range 0 3 + +config SCB8_MI0_SLOT3 + int "Slot 3 slave interface id" + default 3 + range 0 3 + +config SCB8_MI0_SLOT4 + int "Slot 4 slave interface id" + default 0 + range 0 3 + +config SCB8_MI0_SLOT5 + int "Slot 5 slave interface id" + default 1 + range 0 3 + +config SCB8_MI0_SLOT6 + int "Slot 6 slave interface id" + default 2 + range 0 3 + +config SCB8_MI0_SLOT7 + int "Slot 7 slave interface id" + default 3 + range 0 3 + +endif # SCB8_MI0 + +menuconfig SCB9_MI0 + bool "SCB9 Master Interface 0" + default n + depends on SCB_PRIORITY + help + The slave interface id of each slot should be set according following table. + PVP MPDO -- 0 + PVP MPDI -- 1 + PVP MPCO -- 2 + PVP MPCI -- 3 + PVP CPDOA -- 4 + +if SCB9_MI0 + +config SCB9_MI0_SLOT0 + int "Slot 0 slave interface id" + default 0 + range 0 4 + +config SCB9_MI0_SLOT1 + int "Slot 1 slave interface id" + default 1 + range 0 4 + +config SCB9_MI0_SLOT2 + int "Slot 2 slave interface id" + default 2 + range 0 4 + +config SCB9_MI0_SLOT3 + int "Slot 3 slave interface id" + default 3 + range 0 4 + +config SCB9_MI0_SLOT4 + int "Slot 4 slave interface id" + default 4 + range 0 4 + +config SCB9_MI0_SLOT5 + int "Slot 5 slave interface id" + default 0 + range 0 4 + +config SCB9_MI0_SLOT6 + int "Slot 6 slave interface id" + default 1 + range 0 4 + +config SCB9_MI0_SLOT7 + int "Slot 7 slave interface id" + default 2 + range 0 4 + +config SCB9_MI0_SLOT8 + int "Slot 8 slave interface id" + default 3 + range 0 4 + +config SCB9_MI0_SLOT9 + int "Slot 9 slave interface id" + default 4 + range 0 4 + +endif # SCB9_MI0 + +endmenu + +endif diff --git a/arch/blackfin/mach-bf609/Makefile b/arch/blackfin/mach-bf609/Makefile new file mode 100644 index 00000000000..60ffaf85d30 --- /dev/null +++ b/arch/blackfin/mach-bf609/Makefile @@ -0,0 +1,7 @@ +# +# arch/blackfin/mach-bf609/Makefile +# + +obj-y := dma.o clock.o ints-priority.o +obj-$(CONFIG_PM) += pm.o dpm.o +obj-$(CONFIG_SCB_PRIORITY) += scb.o diff --git a/arch/blackfin/mach-bf609/boards/Kconfig b/arch/blackfin/mach-bf609/boards/Kconfig new file mode 100644 index 00000000000..30e8b6b0d2e --- /dev/null +++ b/arch/blackfin/mach-bf609/boards/Kconfig @@ -0,0 +1,12 @@ +choice + prompt "System type" + default BFIN609_EZKIT + help + Select your board! + +config BFIN609_EZKIT + bool "BF609-EZKIT" + help + BFIN609-EZKIT board support. + +endchoice diff --git a/arch/blackfin/mach-bf609/boards/Makefile b/arch/blackfin/mach-bf609/boards/Makefile new file mode 100644 index 00000000000..11f98b0882e --- /dev/null +++ b/arch/blackfin/mach-bf609/boards/Makefile @@ -0,0 +1,5 @@ +# +# arch/blackfin/mach-bf609/boards/Makefile +# + +obj-$(CONFIG_BFIN609_EZKIT) += ezkit.o diff --git a/arch/blackfin/mach-bf609/boards/ezkit.c b/arch/blackfin/mach-bf609/boards/ezkit.c new file mode 100644 index 00000000000..e2c0b024ce8 --- /dev/null +++ b/arch/blackfin/mach-bf609/boards/ezkit.c @@ -0,0 +1,2112 @@ +/* + * Copyright 2004-2009 Analog Devices Inc. + * 2005 National ICT Australia (NICTA) + * Aidan Williams <aidan@nicta.com.au> + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <linux/irq.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/usb/musb.h> +#include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/platform_data/pinctrl-adi2.h> +#include <linux/spi/adi_spi3.h> +#include <asm/dma.h> +#include <asm/gpio.h> +#include <asm/nand.h> +#include <asm/dpmc.h> +#include <asm/portmux.h> +#include <asm/bfin_sdh.h> +#include <linux/input.h> +#include <linux/spi/ad7877.h> + +/* + * Name the Board for the /proc/cpuinfo + */ +const char bfin_board_name[] = "ADI BF609-EZKIT"; + +/* + * Driver needs to know address, irq and flag pin. + */ + +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) +#include <linux/usb/isp1760.h> +static struct resource bfin_isp1760_resources[] = { + [0] = { + .start = 0x2C0C0000, + .end = 0x2C0C0000 + 0xfffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PG7, + .end = IRQ_PG7, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct isp1760_platform_data isp1760_priv = { + .is_isp1761 = 0, + .bus_width_16 = 1, + .port1_otg = 0, + .analog_oc = 0, + .dack_polarity_high = 0, + .dreq_polarity_high = 0, +}; + +static struct platform_device bfin_isp1760_device = { + .name = "isp1760", + .id = 0, + .dev = { + .platform_data = &isp1760_priv, + }, + .num_resources = ARRAY_SIZE(bfin_isp1760_resources), + .resource = bfin_isp1760_resources, +}; +#endif + +#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY) +#include <asm/bfin_rotary.h> + +static struct bfin_rotary_platform_data bfin_rotary_data = { + /*.rotary_up_key = KEY_UP,*/ + /*.rotary_down_key = KEY_DOWN,*/ + .rotary_rel_code = REL_WHEEL, + .rotary_button_key = KEY_ENTER, + .debounce = 10, /* 0..17 */ + .mode = ROT_QUAD_ENC | ROT_DEBE, +}; + +static struct resource bfin_rotary_resources[] = { + { + .start = IRQ_CNT, + .end = IRQ_CNT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_rotary_device = { + .name = "bfin-rotary", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_rotary_resources), + .resource = bfin_rotary_resources, + .dev = { + .platform_data = &bfin_rotary_data, + }, +}; +#endif + +#if IS_ENABLED(CONFIG_STMMAC_ETH) +#include <linux/stmmac.h> +#include <linux/phy.h> + +static struct stmmac_mdio_bus_data phy_private_data = { + .phy_mask = 1, +}; + +static struct stmmac_dma_cfg eth_dma_cfg = { + .pbl = 2, +}; + +int stmmac_ptp_clk_init(struct platform_device *pdev, void *priv) +{ + bfin_write32(PADS0_EMAC_PTP_CLKSEL, 0); + return 0; +} + +static struct plat_stmmacenet_data eth_private_data = { + .has_gmac = 1, + .bus_id = 0, + .enh_desc = 1, + .phy_addr = 1, + .mdio_bus_data = &phy_private_data, + .dma_cfg = ð_dma_cfg, + .force_thresh_dma_mode = 1, + .interface = PHY_INTERFACE_MODE_RMII, + .init = stmmac_ptp_clk_init, +}; + +static struct platform_device bfin_eth_device = { + .name = "stmmaceth", + .id = 0, + .num_resources = 2, + .resource = (struct resource[]) { + { + .start = EMAC0_MACCFG, + .end = EMAC0_MACCFG + 0x1274, + .flags = IORESOURCE_MEM, + }, + { + .name = "macirq", + .start = IRQ_EMAC0_STAT, + .end = IRQ_EMAC0_STAT, + .flags = IORESOURCE_IRQ, + }, + }, + .dev = { + .power.can_wakeup = 1, + .platform_data = ð_private_data, + } +}; +#endif + +#if IS_ENABLED(CONFIG_INPUT_ADXL34X) +#include <linux/input/adxl34x.h> +static const struct adxl34x_platform_data adxl34x_info = { + .x_axis_offset = 0, + .y_axis_offset = 0, + .z_axis_offset = 0, + .tap_threshold = 0x31, + .tap_duration = 0x10, + .tap_latency = 0x60, + .tap_window = 0xF0, + .tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN, + .act_axis_control = 0xFF, + .activity_threshold = 5, + .inactivity_threshold = 3, + .inactivity_time = 4, + .free_fall_threshold = 0x7, + .free_fall_time = 0x20, + .data_rate = 0x8, + .data_range = ADXL_FULL_RES, + + .ev_type = EV_ABS, + .ev_code_x = ABS_X, /* EV_REL */ + .ev_code_y = ABS_Y, /* EV_REL */ + .ev_code_z = ABS_Z, /* EV_REL */ + + .ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY x,y,z */ + +/* .ev_code_ff = KEY_F,*/ /* EV_KEY */ +/* .ev_code_act_inactivity = KEY_A,*/ /* EV_KEY */ + .power_mode = ADXL_AUTO_SLEEP | ADXL_LINK, + .fifo_mode = ADXL_FIFO_STREAM, + .orientation_enable = ADXL_EN_ORIENTATION_3D, + .deadzone_angle = ADXL_DEADZONE_ANGLE_10p8, + .divisor_length = ADXL_LP_FILTER_DIVISOR_16, + /* EV_KEY {+Z, +Y, +X, -X, -Y, -Z} */ + .ev_codes_orient_3d = {BTN_Z, BTN_Y, BTN_X, BTN_A, BTN_B, BTN_C}, +}; +#endif + +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) +static struct platform_device rtc_device = { + .name = "rtc-bfin", + .id = -1, +}; +#endif + +#if IS_ENABLED(CONFIG_SERIAL_BFIN) +#ifdef CONFIG_SERIAL_BFIN_UART0 +static struct resource bfin_uart0_resources[] = { + { + .start = UART0_REVID, + .end = UART0_RXDIV+4, + .flags = IORESOURCE_MEM, + }, +#ifdef CONFIG_EARLY_PRINTK + { + .start = PORTD_FER, + .end = PORTD_FER+2, + .flags = IORESOURCE_REG, + }, + { + .start = PORTD_MUX, + .end = PORTD_MUX+3, + .flags = IORESOURCE_REG, + }, +#endif + { + .start = IRQ_UART0_TX, + .end = IRQ_UART0_TX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART0_STAT, + .end = IRQ_UART0_STAT, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_TX, + .end = CH_UART0_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX, + .flags = IORESOURCE_DMA, + }, +#ifdef CONFIG_BFIN_UART0_CTSRTS + { /* CTS pin -- 0 means not supported */ + .start = GPIO_PD10, + .end = GPIO_PD10, + .flags = IORESOURCE_IO, + }, + { /* RTS pin -- 0 means not supported */ + .start = GPIO_PD9, + .end = GPIO_PD9, + .flags = IORESOURCE_IO, + }, +#endif +}; + +static unsigned short bfin_uart0_peripherals[] = { + P_UART0_TX, P_UART0_RX, +#ifdef CONFIG_BFIN_UART0_CTSRTS + P_UART0_RTS, P_UART0_CTS, +#endif + 0 +}; + +static struct platform_device bfin_uart0_device = { + .name = "bfin-uart", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_uart0_resources), + .resource = bfin_uart0_resources, + .dev = { + .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 +static struct resource bfin_uart1_resources[] = { + { + .start = UART1_REVID, + .end = UART1_RXDIV+4, + .flags = IORESOURCE_MEM, + }, +#ifdef CONFIG_EARLY_PRINTK + { + .start = PORTG_FER_SET, + .end = PORTG_FER_SET+2, + .flags = IORESOURCE_REG, + }, +#endif + { + .start = IRQ_UART1_TX, + .end = IRQ_UART1_TX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART1_RX, + .end = IRQ_UART1_RX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART1_STAT, + .end = IRQ_UART1_STAT, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART1_TX, + .end = CH_UART1_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART1_RX, + .end = CH_UART1_RX, + .flags = IORESOURCE_DMA, + }, +#ifdef CONFIG_BFIN_UART1_CTSRTS + { /* CTS pin -- 0 means not supported */ + .start = GPIO_PG13, + .end = GPIO_PG13, + .flags = IORESOURCE_IO, + }, + { /* RTS pin -- 0 means not supported */ + .start = GPIO_PG10, + .end = GPIO_PG10, + .flags = IORESOURCE_IO, + }, +#endif +}; + +static unsigned short bfin_uart1_peripherals[] = { + P_UART1_TX, P_UART1_RX, +#ifdef CONFIG_BFIN_UART1_CTSRTS + P_UART1_RTS, P_UART1_CTS, +#endif + 0 +}; + +static struct platform_device bfin_uart1_device = { + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart1_resources), + .resource = bfin_uart1_resources, + .dev = { + .platform_data = &bfin_uart1_peripherals, /* Passed to driver */ + }, +}; +#endif +#endif + +#if IS_ENABLED(CONFIG_BFIN_SIR) +#ifdef CONFIG_BFIN_SIR0 +static struct resource bfin_sir0_resources[] = { + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_UART0_TX, + .end = IRQ_UART0_TX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_TX, + .end = CH_UART0_TX+1, + .flags = IORESOURCE_DMA, + }, +}; +static struct platform_device bfin_sir0_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir0_resources), + .resource = bfin_sir0_resources, +}; +#endif +#ifdef CONFIG_BFIN_SIR1 +static struct resource bfin_sir1_resources[] = { + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_UART1_TX, + .end = IRQ_UART1_TX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART1_TX, + .end = CH_UART1_TX+1, + .flags = IORESOURCE_DMA, + }, +}; +static struct platform_device bfin_sir1_device = { + .name = "bfin_sir", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_sir1_resources), + .resource = bfin_sir1_resources, +}; +#endif +#endif + +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) +static struct resource musb_resources[] = { + [0] = { + .start = 0xFFCC1000, + .end = 0xFFCC1398, + .flags = IORESOURCE_MEM, + }, + [1] = { /* general IRQ */ + .start = IRQ_USB_STAT, + .end = IRQ_USB_STAT, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + .name = "mc" + }, + [2] = { /* DMA IRQ */ + .start = IRQ_USB_DMA, + .end = IRQ_USB_DMA, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + .name = "dma" + }, +}; + +static struct musb_hdrc_config musb_config = { + .multipoint = 1, + .dyn_fifo = 0, + .dma = 1, + .num_eps = 16, + .dma_channels = 8, + .clkin = 48, /* musb CLKIN in MHZ */ +}; + +static struct musb_hdrc_platform_data musb_plat = { +#if defined(CONFIG_USB_MUSB_HDRC) && defined(CONFIG_USB_GADGET_MUSB_HDRC) + .mode = MUSB_OTG, +#elif defined(CONFIG_USB_MUSB_HDRC) + .mode = MUSB_HOST, +#elif defined(CONFIG_USB_GADGET_MUSB_HDRC) + .mode = MUSB_PERIPHERAL, +#endif + .config = &musb_config, +}; + +static u64 musb_dmamask = ~(u32)0; + +static struct platform_device musb_device = { + .name = "musb-blackfin", + .id = 0, + .dev = { + .dma_mask = &musb_dmamask, + .coherent_dma_mask = 0xffffffff, + .platform_data = &musb_plat, + }, + .num_resources = ARRAY_SIZE(musb_resources), + .resource = musb_resources, +}; +#endif + +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART +static struct resource bfin_sport0_uart_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +static unsigned short bfin_sport0_peripherals[] = { + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0 +}; + +static struct platform_device bfin_sport0_uart_device = { + .name = "bfin-sport-uart", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources), + .resource = bfin_sport0_uart_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART +static struct resource bfin_sport1_uart_resources[] = { + { + .start = SPORT1_TCR1, + .end = SPORT1_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT1_RX, + .end = IRQ_SPORT1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT1_ERROR, + .end = IRQ_SPORT1_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +static unsigned short bfin_sport1_peripherals[] = { + P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, + P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0 +}; + +static struct platform_device bfin_sport1_uart_device = { + .name = "bfin-sport-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources), + .resource = bfin_sport1_uart_resources, + .dev = { + .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART +static struct resource bfin_sport2_uart_resources[] = { + { + .start = SPORT2_TCR1, + .end = SPORT2_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT2_RX, + .end = IRQ_SPORT2_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT2_ERROR, + .end = IRQ_SPORT2_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +static unsigned short bfin_sport2_peripherals[] = { + P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS, + P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0 +}; + +static struct platform_device bfin_sport2_uart_device = { + .name = "bfin-sport-uart", + .id = 2, + .num_resources = ARRAY_SIZE(bfin_sport2_uart_resources), + .resource = bfin_sport2_uart_resources, + .dev = { + .platform_data = &bfin_sport2_peripherals, /* Passed to driver */ + }, +}; +#endif +#endif + +#if IS_ENABLED(CONFIG_CAN_BFIN) + +static unsigned short bfin_can0_peripherals[] = { + P_CAN0_RX, P_CAN0_TX, 0 +}; + +static struct resource bfin_can0_resources[] = { + { + .start = 0xFFC00A00, + .end = 0xFFC00FFF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_CAN0_RX, + .end = IRQ_CAN0_RX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_CAN0_TX, + .end = IRQ_CAN0_TX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_CAN0_STAT, + .end = IRQ_CAN0_STAT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_can0_device = { + .name = "bfin_can", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_can0_resources), + .resource = bfin_can0_resources, + .dev = { + .platform_data = &bfin_can0_peripherals, /* Passed to driver */ + }, +}; + +#endif + +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) +static struct mtd_partition partition_info[] = { + { + .name = "bootloader(nand)", + .offset = 0, + .size = 0x80000, + }, { + .name = "linux kernel(nand)", + .offset = MTDPART_OFS_APPEND, + .size = 4 * 1024 * 1024, + }, + { + .name = "file system(nand)", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct bf5xx_nand_platform bfin_nand_platform = { + .data_width = NFC_NWIDTH_8, + .partitions = partition_info, + .nr_partitions = ARRAY_SIZE(partition_info), + .rd_dly = 3, + .wr_dly = 3, +}; + +static struct resource bfin_nand_resources[] = { + { + .start = 0xFFC03B00, + .end = 0xFFC03B4F, + .flags = IORESOURCE_MEM, + }, + { + .start = CH_NFC, + .end = CH_NFC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_nand_device = { + .name = "bfin-nand", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_nand_resources), + .resource = bfin_nand_resources, + .dev = { + .platform_data = &bfin_nand_platform, + }, +}; +#endif + +#if IS_ENABLED(CONFIG_SDH_BFIN) + +static struct bfin_sd_host bfin_sdh_data = { + .dma_chan = CH_RSI, + .irq_int0 = IRQ_RSI_INT0, + .pin_req = {P_RSI_DATA0, P_RSI_DATA1, P_RSI_DATA2, P_RSI_DATA3, P_RSI_CMD, P_RSI_CLK, 0}, +}; + +static struct platform_device bfin_sdh_device = { + .name = "bfin-sdh", + .id = 0, + .dev = { + .platform_data = &bfin_sdh_data, + }, +}; +#endif + +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) +static struct mtd_partition ezkit_partitions[] = { + { + .name = "bootloader(nor)", + .size = 0x80000, + .offset = 0, + }, { + .name = "linux kernel(nor)", + .size = 0x400000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "file system(nor)", + .size = 0x1000000 - 0x80000 - 0x400000, + .offset = MTDPART_OFS_APPEND, + }, +}; + +int bf609_nor_flash_init(struct platform_device *pdev) +{ +#define CONFIG_SMC_GCTL_VAL 0x00000010 + + bfin_write32(SMC_GCTL, CONFIG_SMC_GCTL_VAL); + bfin_write32(SMC_B0CTL, 0x01002011); + bfin_write32(SMC_B0TIM, 0x08170977); + bfin_write32(SMC_B0ETIM, 0x00092231); + return 0; +} + +void bf609_nor_flash_exit(struct platform_device *pdev) +{ + bfin_write32(SMC_GCTL, 0); +} + +static struct physmap_flash_data ezkit_flash_data = { + .width = 2, + .parts = ezkit_partitions, + .init = bf609_nor_flash_init, + .exit = bf609_nor_flash_exit, + .nr_parts = ARRAY_SIZE(ezkit_partitions), +#ifdef CONFIG_ROMKERNEL + .probe_type = "map_rom", +#endif +}; + +static struct resource ezkit_flash_resource = { + .start = 0xb0000000, + .end = 0xb0ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device ezkit_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &ezkit_flash_data, + }, + .num_resources = 1, + .resource = &ezkit_flash_resource, +}; +#endif + +#if IS_ENABLED(CONFIG_MTD_M25P80) +/* SPI flash chip (w25q32) */ +static struct mtd_partition bfin_spi_flash_partitions[] = { + { + .name = "bootloader(spi)", + .size = 0x00080000, + .offset = 0, + .mask_flags = MTD_CAP_ROM + }, { + .name = "linux kernel(spi)", + .size = 0x00180000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "file system(spi)", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct flash_platform_data bfin_spi_flash_data = { + .name = "m25p80", + .parts = bfin_spi_flash_partitions, + .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), + .type = "w25q32", +}; + +static struct adi_spi3_chip spi_flash_chip_info = { + .enable_dma = true, /* use dma transfer with this chip*/ +}; +#endif + +#if IS_ENABLED(CONFIG_SPI_SPIDEV) +static struct adi_spi3_chip spidev_chip_info = { + .enable_dma = true, +}; +#endif + +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) +static struct platform_device bfin_i2s_pcm = { + .name = "bfin-i2s-pcm-audio", + .id = -1, +}; +#endif + +#if IS_ENABLED(CONFIG_SND_BF6XX_SOC_I2S) +#include <asm/bfin_sport3.h> +static struct resource bfin_snd_resources[] = { + { + .start = SPORT0_CTL_A, + .end = SPORT0_CTL_A, + .flags = IORESOURCE_MEM, + }, + { + .start = SPORT0_CTL_B, + .end = SPORT0_CTL_B, + .flags = IORESOURCE_MEM, + }, + { + .start = CH_SPORT0_TX, + .end = CH_SPORT0_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_SPORT0_RX, + .end = CH_SPORT0_RX, + .flags = IORESOURCE_DMA, + }, + { + .start = IRQ_SPORT0_TX_STAT, + .end = IRQ_SPORT0_TX_STAT, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_RX_STAT, + .end = IRQ_SPORT0_RX_STAT, + .flags = IORESOURCE_IRQ, + }, +}; + +static const unsigned short bfin_snd_pin[] = { + P_SPORT0_ACLK, P_SPORT0_AFS, P_SPORT0_AD0, P_SPORT0_BCLK, + P_SPORT0_BFS, P_SPORT0_BD0, 0, +}; + +static struct bfin_snd_platform_data bfin_snd_data = { + .pin_req = bfin_snd_pin, +}; + +static struct platform_device bfin_i2s = { + .name = "bfin-i2s", + .num_resources = ARRAY_SIZE(bfin_snd_resources), + .resource = bfin_snd_resources, + .dev = { + .platform_data = &bfin_snd_data, + }, +}; +#endif + +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) +static const char * const ad1836_link[] = { + "bfin-i2s.0", + "spi0.76", +}; +static struct platform_device bfin_ad1836_machine = { + .name = "bfin-snd-ad1836", + .id = -1, + .dev = { + .platform_data = (void *)ad1836_link, + }, +}; +#endif + +#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61) +static struct platform_device adau1761_device = { + .name = "bfin-eval-adau1x61", +}; +#endif + +#if IS_ENABLED(CONFIG_SND_SOC_ADAU1761) +#include <sound/adau17x1.h> +static struct adau1761_platform_data adau1761_info = { + .lineout_mode = ADAU1761_OUTPUT_MODE_LINE, + .headphone_mode = ADAU1761_OUTPUT_MODE_HEADPHONE_CAPLESS, +}; +#endif + +#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE) +#include <linux/videodev2.h> +#include <media/blackfin/bfin_capture.h> +#include <media/blackfin/ppi.h> + +static const unsigned short ppi_req[] = { + P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3, + P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7, + P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11, + P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15, +#if !IS_ENABLED(CONFIG_VIDEO_VS6624) + P_PPI0_D16, P_PPI0_D17, P_PPI0_D18, P_PPI0_D19, + P_PPI0_D20, P_PPI0_D21, P_PPI0_D22, P_PPI0_D23, +#endif + P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2, + 0, +}; + +static const struct ppi_info ppi_info = { + .type = PPI_TYPE_EPPI3, + .dma_ch = CH_EPPI0_CH0, + .irq_err = IRQ_EPPI0_STAT, + .base = (void __iomem *)EPPI0_STAT, + .pin_req = ppi_req, +}; + +#if IS_ENABLED(CONFIG_VIDEO_VS6624) +static struct v4l2_input vs6624_inputs[] = { + { + .index = 0, + .name = "Camera", + .type = V4L2_INPUT_TYPE_CAMERA, + .std = V4L2_STD_UNKNOWN, + }, +}; + +static struct bcap_route vs6624_routes[] = { + { + .input = 0, + .output = 0, + }, +}; + +static const unsigned vs6624_ce_pin = GPIO_PE4; + +static struct bfin_capture_config bfin_capture_data = { + .card_name = "BF609", + .inputs = vs6624_inputs, + .num_inputs = ARRAY_SIZE(vs6624_inputs), + .routes = vs6624_routes, + .i2c_adapter_id = 0, + .board_info = { + .type = "vs6624", + .addr = 0x10, + .platform_data = (void *)&vs6624_ce_pin, + }, + .ppi_info = &ppi_info, + .ppi_control = (PACK_EN | DLEN_8 | EPPI_CTL_FS1HI_FS2HI + | EPPI_CTL_POLC3 | EPPI_CTL_SYNC2 | EPPI_CTL_NON656), + .blank_pixels = 4, +}; +#endif + +#if IS_ENABLED(CONFIG_VIDEO_ADV7842) +#include <media/adv7842.h> + +static struct v4l2_input adv7842_inputs[] = { + { + .index = 0, + .name = "Composite", + .type = V4L2_INPUT_TYPE_CAMERA, + .std = V4L2_STD_ALL, + .capabilities = V4L2_IN_CAP_STD, + }, + { + .index = 1, + .name = "S-Video", + .type = V4L2_INPUT_TYPE_CAMERA, + .std = V4L2_STD_ALL, + .capabilities = V4L2_IN_CAP_STD, + }, + { + .index = 2, + .name = "Component", + .type = V4L2_INPUT_TYPE_CAMERA, + .capabilities = V4L2_IN_CAP_DV_TIMINGS, + }, + { + .index = 3, + .name = "VGA", + .type = V4L2_INPUT_TYPE_CAMERA, + .capabilities = V4L2_IN_CAP_DV_TIMINGS, + }, + { + .index = 4, + .name = "HDMI", + .type = V4L2_INPUT_TYPE_CAMERA, + .capabilities = V4L2_IN_CAP_DV_TIMINGS, + }, +}; + +static struct bcap_route adv7842_routes[] = { + { + .input = 3, + .output = 0, + .ppi_control = (PACK_EN | DLEN_8 | EPPI_CTL_FLDSEL + | EPPI_CTL_ACTIVE656), + }, + { + .input = 4, + .output = 0, + }, + { + .input = 2, + .output = 0, + }, + { + .input = 1, + .output = 0, + }, + { + .input = 0, + .output = 1, + .ppi_control = (EPPI_CTL_SPLTWRD | PACK_EN | DLEN_16 + | EPPI_CTL_FS1LO_FS2LO | EPPI_CTL_POLC2 + | EPPI_CTL_SYNC2 | EPPI_CTL_NON656), + }, +}; + +static struct adv7842_output_format adv7842_opf[] = { + { + .op_ch_sel = ADV7842_OP_CH_SEL_BRG, + .op_format_sel = ADV7842_OP_FORMAT_SEL_SDR_ITU656_8, + .op_656_range = 1, + .blank_data = 1, + .insert_av_codes = 1, + }, + { + .op_ch_sel = ADV7842_OP_CH_SEL_RGB, + .op_format_sel = ADV7842_OP_FORMAT_SEL_SDR_ITU656_16, + .op_656_range = 1, + .blank_data = 1, + }, +}; + +static struct adv7842_platform_data adv7842_data = { + .opf = adv7842_opf, + .num_opf = ARRAY_SIZE(adv7842_opf), + .ain_sel = ADV7842_AIN10_11_12_NC_SYNC_4_1, + .prim_mode = ADV7842_PRIM_MODE_SDP, + .vid_std_select = ADV7842_SDP_VID_STD_CVBS_SD_4x1, + .hdmi_free_run_enable = 1, + .sdp_free_run_auto = 1, + .llc_dll_phase = 0x10, + .i2c_sdp_io = 0x40, + .i2c_sdp = 0x41, + .i2c_cp = 0x42, + .i2c_vdp = 0x43, + .i2c_afe = 0x44, + .i2c_hdmi = 0x45, + .i2c_repeater = 0x46, + .i2c_edid = 0x47, + .i2c_infoframe = 0x48, + .i2c_cec = 0x49, + .i2c_avlink = 0x4a, + .i2c_ex = 0x26, +}; + +static struct bfin_capture_config bfin_capture_data = { + .card_name = "BF609", + .inputs = adv7842_inputs, + .num_inputs = ARRAY_SIZE(adv7842_inputs), + .routes = adv7842_routes, + .i2c_adapter_id = 0, + .board_info = { + .type = "adv7842", + .addr = 0x20, + .platform_data = (void *)&adv7842_data, + }, + .ppi_info = &ppi_info, + .ppi_control = (PACK_EN | DLEN_8 | EPPI_CTL_FLDSEL + | EPPI_CTL_ACTIVE656), +}; +#endif + +static struct platform_device bfin_capture_device = { + .name = "bfin_capture", + .dev = { + .platform_data = &bfin_capture_data, + }, +}; +#endif + +#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_DISPLAY) +#include <linux/videodev2.h> +#include <media/blackfin/bfin_display.h> +#include <media/blackfin/ppi.h> + +static const unsigned short ppi_req_disp[] = { + P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3, + P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7, + P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11, + P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15, + P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2, + 0, +}; + +static const struct ppi_info ppi_info = { + .type = PPI_TYPE_EPPI3, + .dma_ch = CH_EPPI0_CH0, + .irq_err = IRQ_EPPI0_STAT, + .base = (void __iomem *)EPPI0_STAT, + .pin_req = ppi_req_disp, +}; + +#if IS_ENABLED(CONFIG_VIDEO_ADV7511) +#include <media/adv7511.h> + +static struct v4l2_output adv7511_outputs[] = { + { + .index = 0, + .name = "HDMI", + .type = V4L2_INPUT_TYPE_CAMERA, + .capabilities = V4L2_OUT_CAP_DV_TIMINGS, + }, +}; + +static struct disp_route adv7511_routes[] = { + { + .output = 0, + }, +}; + +static struct adv7511_platform_data adv7511_data = { + .edid_addr = 0x7e, + .i2c_ex = 0x25, +}; + +static struct bfin_display_config bfin_display_data = { + .card_name = "BF609", + .outputs = adv7511_outputs, + .num_outputs = ARRAY_SIZE(adv7511_outputs), + .routes = adv7511_routes, + .i2c_adapter_id = 0, + .board_info = { + .type = "adv7511", + .addr = 0x39, + .platform_data = (void *)&adv7511_data, + }, + .ppi_info = &ppi_info, + .ppi_control = (EPPI_CTL_SPLTWRD | PACK_EN | DLEN_16 + | EPPI_CTL_FS1LO_FS2LO | EPPI_CTL_POLC3 + | EPPI_CTL_IFSGEN | EPPI_CTL_SYNC2 + | EPPI_CTL_NON656 | EPPI_CTL_DIR), +}; +#endif + +#if IS_ENABLED(CONFIG_VIDEO_ADV7343) +#include <media/adv7343.h> + +static struct v4l2_output adv7343_outputs[] = { + { + .index = 0, + .name = "Composite", + .type = V4L2_OUTPUT_TYPE_ANALOG, + .std = V4L2_STD_ALL, + .capabilities = V4L2_OUT_CAP_STD, + }, + { + .index = 1, + .name = "S-Video", + .type = V4L2_OUTPUT_TYPE_ANALOG, + .std = V4L2_STD_ALL, + .capabilities = V4L2_OUT_CAP_STD, + }, + { + .index = 2, + .name = "Component", + .type = V4L2_OUTPUT_TYPE_ANALOG, + .std = V4L2_STD_ALL, + .capabilities = V4L2_OUT_CAP_STD, + }, + +}; + +static struct disp_route adv7343_routes[] = { + { + .output = ADV7343_COMPOSITE_ID, + }, + { + .output = ADV7343_SVIDEO_ID, + }, + { + .output = ADV7343_COMPONENT_ID, + }, +}; + +static struct adv7343_platform_data adv7343_data = { + .mode_config = { + .sleep_mode = false, + .pll_control = false, + .dac_1 = true, + .dac_2 = true, + .dac_3 = true, + .dac_4 = true, + .dac_5 = true, + .dac_6 = true, + }, + .sd_config = { + .sd_dac_out1 = false, + .sd_dac_out2 = false, + }, +}; + +static struct bfin_display_config bfin_display_data = { + .card_name = "BF609", + .outputs = adv7343_outputs, + .num_outputs = ARRAY_SIZE(adv7343_outputs), + .routes = adv7343_routes, + .i2c_adapter_id = 0, + .board_info = { + .type = "adv7343", + .addr = 0x2b, + .platform_data = (void *)&adv7343_data, + }, + .ppi_info = &ppi_info_disp, + .ppi_control = (PACK_EN | DLEN_8 | EPPI_CTL_FS1LO_FS2LO + | EPPI_CTL_POLC3 | EPPI_CTL_BLANKGEN | EPPI_CTL_SYNC2 + | EPPI_CTL_NON656 | EPPI_CTL_DIR), +}; +#endif + +static struct platform_device bfin_display_device = { + .name = "bfin_display", + .dev = { + .platform_data = &bfin_display_data, + }, +}; +#endif + +#if defined(CONFIG_BFIN_CRC) +#define BFIN_CRC_NAME "bfin-crc" + +static struct resource bfin_crc0_resources[] = { + { + .start = REG_CRC0_CTL, + .end = REG_CRC0_REVID+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_CRC0_DCNTEXP, + .end = IRQ_CRC0_DCNTEXP, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_MEM_STREAM0_SRC_CRC0, + .end = CH_MEM_STREAM0_SRC_CRC0, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_MEM_STREAM0_DEST_CRC0, + .end = CH_MEM_STREAM0_DEST_CRC0, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device bfin_crc0_device = { + .name = BFIN_CRC_NAME, + .id = 0, + .num_resources = ARRAY_SIZE(bfin_crc0_resources), + .resource = bfin_crc0_resources, +}; + +static struct resource bfin_crc1_resources[] = { + { + .start = REG_CRC1_CTL, + .end = REG_CRC1_REVID+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_CRC1_DCNTEXP, + .end = IRQ_CRC1_DCNTEXP, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_MEM_STREAM1_SRC_CRC1, + .end = CH_MEM_STREAM1_SRC_CRC1, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_MEM_STREAM1_DEST_CRC1, + .end = CH_MEM_STREAM1_DEST_CRC1, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device bfin_crc1_device = { + .name = BFIN_CRC_NAME, + .id = 1, + .num_resources = ARRAY_SIZE(bfin_crc1_resources), + .resource = bfin_crc1_resources, +}; +#endif + +#if defined(CONFIG_CRYPTO_DEV_BFIN_CRC) +#define BFIN_CRYPTO_CRC_NAME "bfin-hmac-crc" +#define BFIN_CRYPTO_CRC_POLY_DATA 0x5c5c5c5c + +static struct resource bfin_crypto_crc_resources[] = { + { + .start = REG_CRC0_CTL, + .end = REG_CRC0_REVID+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_CRC0_DCNTEXP, + .end = IRQ_CRC0_DCNTEXP, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_MEM_STREAM0_SRC_CRC0, + .end = CH_MEM_STREAM0_SRC_CRC0, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device bfin_crypto_crc_device = { + .name = BFIN_CRYPTO_CRC_NAME, + .id = 0, + .num_resources = ARRAY_SIZE(bfin_crypto_crc_resources), + .resource = bfin_crypto_crc_resources, + .dev = { + .platform_data = (void *)BFIN_CRYPTO_CRC_POLY_DATA, + }, +}; +#endif + +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) +static const struct ad7877_platform_data bfin_ad7877_ts_info = { + .model = 7877, + .vref_delay_usecs = 50, /* internal, no capacitor */ + .x_plate_ohms = 419, + .y_plate_ohms = 486, + .pressure_max = 1000, + .pressure_min = 0, + .stopacq_polarity = 1, + .first_conversion_delay = 3, + .acquisition_time = 1, + .averaging = 1, + .pen_down_acc_interval = 1, +}; +#endif + +#ifdef CONFIG_PINCTRL_ADI2 + +# define ADI_PINT_DEVNAME "adi-gpio-pint" +# define ADI_GPIO_DEVNAME "adi-gpio" +# define ADI_PINCTRL_DEVNAME "pinctrl-adi2" + +static struct platform_device bfin_pinctrl_device = { + .name = ADI_PINCTRL_DEVNAME, + .id = 0, +}; + +static struct resource bfin_pint0_resources[] = { + { + .start = PINT0_MASK_SET, + .end = PINT0_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT0, + .end = IRQ_PINT0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint0_device = { + .name = ADI_PINT_DEVNAME, + .id = 0, + .num_resources = ARRAY_SIZE(bfin_pint0_resources), + .resource = bfin_pint0_resources, +}; + +static struct resource bfin_pint1_resources[] = { + { + .start = PINT1_MASK_SET, + .end = PINT1_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT1, + .end = IRQ_PINT1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint1_device = { + .name = ADI_PINT_DEVNAME, + .id = 1, + .num_resources = ARRAY_SIZE(bfin_pint1_resources), + .resource = bfin_pint1_resources, +}; + +static struct resource bfin_pint2_resources[] = { + { + .start = PINT2_MASK_SET, + .end = PINT2_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT2, + .end = IRQ_PINT2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint2_device = { + .name = ADI_PINT_DEVNAME, + .id = 2, + .num_resources = ARRAY_SIZE(bfin_pint2_resources), + .resource = bfin_pint2_resources, +}; + +static struct resource bfin_pint3_resources[] = { + { + .start = PINT3_MASK_SET, + .end = PINT3_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT3, + .end = IRQ_PINT3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint3_device = { + .name = ADI_PINT_DEVNAME, + .id = 3, + .num_resources = ARRAY_SIZE(bfin_pint3_resources), + .resource = bfin_pint3_resources, +}; + +static struct resource bfin_pint4_resources[] = { + { + .start = PINT4_MASK_SET, + .end = PINT4_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT4, + .end = IRQ_PINT4, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint4_device = { + .name = ADI_PINT_DEVNAME, + .id = 4, + .num_resources = ARRAY_SIZE(bfin_pint4_resources), + .resource = bfin_pint4_resources, +}; + +static struct resource bfin_pint5_resources[] = { + { + .start = PINT5_MASK_SET, + .end = PINT5_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT5, + .end = IRQ_PINT5, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint5_device = { + .name = ADI_PINT_DEVNAME, + .id = 5, + .num_resources = ARRAY_SIZE(bfin_pint5_resources), + .resource = bfin_pint5_resources, +}; + +static struct resource bfin_gpa_resources[] = { + { + .start = PORTA_FER, + .end = PORTA_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { /* optional */ + .start = IRQ_PA0, + .end = IRQ_PA0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpa_pdata = { + .port_pin_base = GPIO_PA0, + .port_width = GPIO_BANKSIZE, + .pint_id = 0, /* PINT0 */ + .pint_assign = true, /* PINT upper 16 bit */ + .pint_map = 0, /* mapping mask in PINT */ +}; + +static struct platform_device bfin_gpa_device = { + .name = ADI_GPIO_DEVNAME, + .id = 0, + .num_resources = ARRAY_SIZE(bfin_gpa_resources), + .resource = bfin_gpa_resources, + .dev = { + .platform_data = &bfin_gpa_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpb_resources[] = { + { + .start = PORTB_FER, + .end = PORTB_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PB0, + .end = IRQ_PB0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpb_pdata = { + .port_pin_base = GPIO_PB0, + .port_width = GPIO_BANKSIZE, + .pint_id = 0, + .pint_assign = false, + .pint_map = 1, +}; + +static struct platform_device bfin_gpb_device = { + .name = ADI_GPIO_DEVNAME, + .id = 1, + .num_resources = ARRAY_SIZE(bfin_gpb_resources), + .resource = bfin_gpb_resources, + .dev = { + .platform_data = &bfin_gpb_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpc_resources[] = { + { + .start = PORTC_FER, + .end = PORTC_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PC0, + .end = IRQ_PC0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpc_pdata = { + .port_pin_base = GPIO_PC0, + .port_width = GPIO_BANKSIZE, + .pint_id = 1, + .pint_assign = false, + .pint_map = 1, +}; + +static struct platform_device bfin_gpc_device = { + .name = ADI_GPIO_DEVNAME, + .id = 2, + .num_resources = ARRAY_SIZE(bfin_gpc_resources), + .resource = bfin_gpc_resources, + .dev = { + .platform_data = &bfin_gpc_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpd_resources[] = { + { + .start = PORTD_FER, + .end = PORTD_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PD0, + .end = IRQ_PD0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpd_pdata = { + .port_pin_base = GPIO_PD0, + .port_width = GPIO_BANKSIZE, + .pint_id = 2, + .pint_assign = false, + .pint_map = 1, +}; + +static struct platform_device bfin_gpd_device = { + .name = ADI_GPIO_DEVNAME, + .id = 3, + .num_resources = ARRAY_SIZE(bfin_gpd_resources), + .resource = bfin_gpd_resources, + .dev = { + .platform_data = &bfin_gpd_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpe_resources[] = { + { + .start = PORTE_FER, + .end = PORTE_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PE0, + .end = IRQ_PE0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpe_pdata = { + .port_pin_base = GPIO_PE0, + .port_width = GPIO_BANKSIZE, + .pint_id = 3, + .pint_assign = false, + .pint_map = 1, +}; + +static struct platform_device bfin_gpe_device = { + .name = ADI_GPIO_DEVNAME, + .id = 4, + .num_resources = ARRAY_SIZE(bfin_gpe_resources), + .resource = bfin_gpe_resources, + .dev = { + .platform_data = &bfin_gpe_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpf_resources[] = { + { + .start = PORTF_FER, + .end = PORTF_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PF0, + .end = IRQ_PF0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpf_pdata = { + .port_pin_base = GPIO_PF0, + .port_width = GPIO_BANKSIZE, + .pint_id = 4, + .pint_assign = false, + .pint_map = 1, +}; + +static struct platform_device bfin_gpf_device = { + .name = ADI_GPIO_DEVNAME, + .id = 5, + .num_resources = ARRAY_SIZE(bfin_gpf_resources), + .resource = bfin_gpf_resources, + .dev = { + .platform_data = &bfin_gpf_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpg_resources[] = { + { + .start = PORTG_FER, + .end = PORTG_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PG0, + .end = IRQ_PG0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpg_pdata = { + .port_pin_base = GPIO_PG0, + .port_width = GPIO_BANKSIZE, + .pint_id = 5, + .pint_assign = false, + .pint_map = 1, +}; + +static struct platform_device bfin_gpg_device = { + .name = ADI_GPIO_DEVNAME, + .id = 6, + .num_resources = ARRAY_SIZE(bfin_gpg_resources), + .resource = bfin_gpg_resources, + .dev = { + .platform_data = &bfin_gpg_pdata, /* Passed to driver */ + }, +}; + +#endif + +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) +#include <linux/input.h> +#include <linux/gpio_keys.h> + +static struct gpio_keys_button bfin_gpio_keys_table[] = { + {BTN_0, GPIO_PB10, 1, "gpio-keys: BTN0"}, + {BTN_1, GPIO_PE1, 1, "gpio-keys: BTN1"}, +}; + +static struct gpio_keys_platform_data bfin_gpio_keys_data = { + .buttons = bfin_gpio_keys_table, + .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), +}; + +static struct platform_device bfin_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &bfin_gpio_keys_data, + }, +}; +#endif + +static struct spi_board_info bfin_spi_board_info[] __initdata = { +#if IS_ENABLED(CONFIG_MTD_M25P80) + { + /* the modalias must be the same as spi device driver name */ + .modalias = "m25p80", /* Name of spi_driver for this device */ + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = MAX_CTRL_CS + GPIO_PD11, /* SPI_SSEL1*/ + .platform_data = &bfin_spi_flash_data, + .controller_data = &spi_flash_chip_info, + .mode = SPI_MODE_3, + }, +#endif +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) + { + .modalias = "ad7877", + .platform_data = &bfin_ad7877_ts_info, + .irq = IRQ_PD9, + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = MAX_CTRL_CS + GPIO_PC15, /* SPI_SSEL4 */ + }, +#endif +#if IS_ENABLED(CONFIG_SPI_SPIDEV) + { + .modalias = "spidev", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = MAX_CTRL_CS + GPIO_PD11, /* SPI_SSEL1*/ + .controller_data = &spidev_chip_info, + }, +#endif +#if IS_ENABLED(CONFIG_INPUT_ADXL34X_SPI) + { + .modalias = "adxl34x", + .platform_data = &adxl34x_info, + .irq = IRQ_PC5, + .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = 2, + .mode = SPI_MODE_3, + }, +#endif +}; +#if IS_ENABLED(CONFIG_SPI_ADI_V3) +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + { + .start = CH_SPI0_TX, + .end = CH_SPI0_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_SPI0_RX, + .end = CH_SPI0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +/* SPI (1) */ +static struct resource bfin_spi1_resource[] = { + { + .start = SPI1_REGBASE, + .end = SPI1_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + { + .start = CH_SPI1_TX, + .end = CH_SPI1_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_SPI1_RX, + .end = CH_SPI1_RX, + .flags = IORESOURCE_DMA, + }, + +}; + +/* SPI controller data */ +static struct adi_spi3_master bf60x_spi_master_info0 = { + .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, + .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, +}; + +static struct platform_device bf60x_spi_master0 = { + .name = "adi-spi3", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, + .dev = { + .platform_data = &bf60x_spi_master_info0, /* Passed to driver */ + }, +}; + +static struct adi_spi3_master bf60x_spi_master_info1 = { + .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, + .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0}, +}; + +static struct platform_device bf60x_spi_master1 = { + .name = "adi-spi3", + .id = 1, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi1_resource), + .resource = bfin_spi1_resource, + .dev = { + .platform_data = &bf60x_spi_master_info1, /* Passed to driver */ + }, +}; +#endif /* spi master and devices */ + +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) +static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; + +static struct resource bfin_twi0_resource[] = { + [0] = { + .start = TWI0_CLKDIV, + .end = TWI0_CLKDIV + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TWI0, + .end = IRQ_TWI0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c_bfin_twi0_device = { + .name = "i2c-bfin-twi", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_twi0_resource), + .resource = bfin_twi0_resource, + .dev = { + .platform_data = &bfin_twi0_pins, + }, +}; + +static const u16 bfin_twi1_pins[] = {P_TWI1_SCL, P_TWI1_SDA, 0}; + +static struct resource bfin_twi1_resource[] = { + [0] = { + .start = TWI1_CLKDIV, + .end = TWI1_CLKDIV + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TWI1, + .end = IRQ_TWI1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c_bfin_twi1_device = { + .name = "i2c-bfin-twi", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_twi1_resource), + .resource = bfin_twi1_resource, + .dev = { + .platform_data = &bfin_twi1_pins, + }, +}; +#endif + +static struct i2c_board_info __initdata bfin_i2c_board_info0[] = { +#if IS_ENABLED(CONFIG_INPUT_ADXL34X_I2C) + { + I2C_BOARD_INFO("adxl34x", 0x53), + .irq = IRQ_PC5, + .platform_data = (void *)&adxl34x_info, + }, +#endif +#if IS_ENABLED(CONFIG_SND_SOC_ADAU1761) + { + I2C_BOARD_INFO("adau1761", 0x38), + .platform_data = (void *)&adau1761_info + }, +#endif +#if IS_ENABLED(CONFIG_SND_SOC_SSM2602) + { + I2C_BOARD_INFO("ssm2602", 0x1b), + }, +#endif +}; + +static struct i2c_board_info __initdata bfin_i2c_board_info1[] = { +}; + +static const unsigned int cclk_vlev_datasheet[] = +{ +/* + * Internal VLEV BF54XSBBC1533 + ****temporarily using these values until data sheet is updated + */ + VRPAIR(VLEV_085, 150000000), + VRPAIR(VLEV_090, 250000000), + VRPAIR(VLEV_110, 276000000), + VRPAIR(VLEV_115, 301000000), + VRPAIR(VLEV_120, 525000000), + VRPAIR(VLEV_125, 550000000), + VRPAIR(VLEV_130, 600000000), +}; + +static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = { + .tuple_tab = cclk_vlev_datasheet, + .tabsize = ARRAY_SIZE(cclk_vlev_datasheet), + .vr_settling_time = 25 /* us */, +}; + +static struct platform_device bfin_dpmc = { + .name = "bfin dpmc", + .dev = { + .platform_data = &bfin_dmpc_vreg_data, + }, +}; + +static struct platform_device *ezkit_devices[] __initdata = { + + &bfin_dpmc, +#if defined(CONFIG_PINCTRL_ADI2) + &bfin_pinctrl_device, + &bfin_pint0_device, + &bfin_pint1_device, + &bfin_pint2_device, + &bfin_pint3_device, + &bfin_pint4_device, + &bfin_pint5_device, + &bfin_gpa_device, + &bfin_gpb_device, + &bfin_gpc_device, + &bfin_gpd_device, + &bfin_gpe_device, + &bfin_gpf_device, + &bfin_gpg_device, +#endif + +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) + &rtc_device, +#endif + +#if IS_ENABLED(CONFIG_SERIAL_BFIN) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#endif + +#if IS_ENABLED(CONFIG_BFIN_SIR) +#ifdef CONFIG_BFIN_SIR0 + &bfin_sir0_device, +#endif +#ifdef CONFIG_BFIN_SIR1 + &bfin_sir1_device, +#endif +#endif + +#if IS_ENABLED(CONFIG_STMMAC_ETH) + &bfin_eth_device, +#endif + +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) + &musb_device, +#endif + +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) + &bfin_isp1760_device, +#endif + +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART + &bfin_sport2_uart_device, +#endif +#endif + +#if IS_ENABLED(CONFIG_CAN_BFIN) + &bfin_can0_device, +#endif + +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) + &bfin_nand_device, +#endif + +#if IS_ENABLED(CONFIG_SDH_BFIN) + &bfin_sdh_device, +#endif + +#if IS_ENABLED(CONFIG_SPI_ADI_V3) + &bf60x_spi_master0, + &bf60x_spi_master1, +#endif + +#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY) + &bfin_rotary_device, +#endif + +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) + &i2c_bfin_twi0_device, +#if !defined(CONFIG_BF542) + &i2c_bfin_twi1_device, +#endif +#endif + +#if defined(CONFIG_BFIN_CRC) + &bfin_crc0_device, + &bfin_crc1_device, +#endif +#if defined(CONFIG_CRYPTO_DEV_BFIN_CRC) + &bfin_crypto_crc_device, +#endif + +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) + &bfin_device_gpiokeys, +#endif + +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) + &ezkit_flash_device, +#endif +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) + &bfin_i2s_pcm, +#endif +#if IS_ENABLED(CONFIG_SND_BF6XX_SOC_I2S) + &bfin_i2s, +#endif +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) + &bfin_ad1836_machine, +#endif +#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61) + &adau1761_device, +#endif +#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE) + &bfin_capture_device, +#endif +#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_DISPLAY) + &bfin_display_device, +#endif + +}; + +/* Pin control settings */ +static struct pinctrl_map __initdata bfin_pinmux_map[] = { + /* per-device maps */ + PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.0", "pinctrl-adi2.0", NULL, "uart0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.1", "pinctrl-adi2.0", NULL, "uart1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.0", "pinctrl-adi2.0", NULL, "uart0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.1", "pinctrl-adi2.0", NULL, "uart1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-sdh.0", "pinctrl-adi2.0", NULL, "rsi0"), + PIN_MAP_MUX_GROUP_DEFAULT("stmmaceth.0", "pinctrl-adi2.0", NULL, "eth0"), + PIN_MAP_MUX_GROUP_DEFAULT("adi-spi3.0", "pinctrl-adi2.0", NULL, "spi0"), + PIN_MAP_MUX_GROUP_DEFAULT("adi-spi3.1", "pinctrl-adi2.0", NULL, "spi1"), + PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.0", "pinctrl-adi2.0", NULL, "twi0"), + PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.1", "pinctrl-adi2.0", NULL, "twi1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-rotary", "pinctrl-adi2.0", NULL, "rotary"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_can.0", "pinctrl-adi2.0", NULL, "can0"), + PIN_MAP_MUX_GROUP_DEFAULT("physmap-flash.0", "pinctrl-adi2.0", NULL, "smc0"), + PIN_MAP_MUX_GROUP_DEFAULT("bf609_nl8048.2", "pinctrl-adi2.0", "ppi2_16bgrp", "ppi2"), + PIN_MAP_MUX_GROUP("bfin_display.0", "8bit", "pinctrl-adi2.0", "ppi2_8bgrp", "ppi2"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_display.0", "pinctrl-adi2.0", "ppi2_16bgrp", "ppi2"), + PIN_MAP_MUX_GROUP("bfin_display.0", "16bit", "pinctrl-adi2.0", "ppi2_16bgrp", "ppi2"), + PIN_MAP_MUX_GROUP("bfin_capture.0", "8bit", "pinctrl-adi2.0", "ppi0_8bgrp", "ppi0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_capture.0", "pinctrl-adi2.0", "ppi0_16bgrp", "ppi0"), + PIN_MAP_MUX_GROUP("bfin_capture.0", "16bit", "pinctrl-adi2.0", "ppi0_16bgrp", "ppi0"), + PIN_MAP_MUX_GROUP("bfin_capture.0", "24bit", "pinctrl-adi2.0", "ppi0_24bgrp", "ppi0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.0", "pinctrl-adi2.0", NULL, "sport0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.0", "pinctrl-adi2.0", NULL, "sport0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.1", "pinctrl-adi2.0", NULL, "sport1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.1", "pinctrl-adi2.0", NULL, "sport1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.2", "pinctrl-adi2.0", NULL, "sport2"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.2", "pinctrl-adi2.0", NULL, "sport2"), +}; + +static int __init ezkit_init(void) +{ + printk(KERN_INFO "%s(): registering device resources\n", __func__); + + /* Initialize pinmuxing */ + pinctrl_register_mappings(bfin_pinmux_map, + ARRAY_SIZE(bfin_pinmux_map)); + + i2c_register_board_info(0, bfin_i2c_board_info0, + ARRAY_SIZE(bfin_i2c_board_info0)); + i2c_register_board_info(1, bfin_i2c_board_info1, + ARRAY_SIZE(bfin_i2c_board_info1)); + + platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); + + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); + + return 0; +} + +arch_initcall(ezkit_init); + +static struct platform_device *ezkit_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(ezkit_early_devices, + ARRAY_SIZE(ezkit_early_devices)); +} diff --git a/arch/blackfin/mach-bf609/clock.c b/arch/blackfin/mach-bf609/clock.c new file mode 100644 index 00000000000..244fa4ab4c5 --- /dev/null +++ b/arch/blackfin/mach-bf609/clock.c @@ -0,0 +1,398 @@ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/string.h> +#include <linux/clk.h> +#include <linux/mutex.h> +#include <linux/spinlock.h> +#include <linux/debugfs.h> +#include <linux/device.h> +#include <linux/init.h> +#include <linux/timer.h> +#include <linux/io.h> +#include <linux/seq_file.h> +#include <linux/clkdev.h> + +#include <asm/clocks.h> + +#define CGU0_CTL_DF (1 << 0) + +#define CGU0_CTL_MSEL_SHIFT 8 +#define CGU0_CTL_MSEL_MASK (0x7f << 8) + +#define CGU0_STAT_PLLEN (1 << 0) +#define CGU0_STAT_PLLBP (1 << 1) +#define CGU0_STAT_PLLLK (1 << 2) +#define CGU0_STAT_CLKSALGN (1 << 3) +#define CGU0_STAT_CCBF0 (1 << 4) +#define CGU0_STAT_CCBF1 (1 << 5) +#define CGU0_STAT_SCBF0 (1 << 6) +#define CGU0_STAT_SCBF1 (1 << 7) +#define CGU0_STAT_DCBF (1 << 8) +#define CGU0_STAT_OCBF (1 << 9) +#define CGU0_STAT_ADDRERR (1 << 16) +#define CGU0_STAT_LWERR (1 << 17) +#define CGU0_STAT_DIVERR (1 << 18) +#define CGU0_STAT_WDFMSERR (1 << 19) +#define CGU0_STAT_WDIVERR (1 << 20) +#define CGU0_STAT_PLOCKERR (1 << 21) + +#define CGU0_DIV_CSEL_SHIFT 0 +#define CGU0_DIV_CSEL_MASK 0x0000001F +#define CGU0_DIV_S0SEL_SHIFT 5 +#define CGU0_DIV_S0SEL_MASK (0x3 << CGU0_DIV_S0SEL_SHIFT) +#define CGU0_DIV_SYSSEL_SHIFT 8 +#define CGU0_DIV_SYSSEL_MASK (0x1f << CGU0_DIV_SYSSEL_SHIFT) +#define CGU0_DIV_S1SEL_SHIFT 13 +#define CGU0_DIV_S1SEL_MASK (0x3 << CGU0_DIV_S1SEL_SHIFT) +#define CGU0_DIV_DSEL_SHIFT 16 +#define CGU0_DIV_DSEL_MASK (0x1f << CGU0_DIV_DSEL_SHIFT) +#define CGU0_DIV_OSEL_SHIFT 22 +#define CGU0_DIV_OSEL_MASK (0x7f << CGU0_DIV_OSEL_SHIFT) + +#define CLK(_clk, _devname, _conname) \ + { \ + .clk = &_clk, \ + .dev_id = _devname, \ + .con_id = _conname, \ + } + +#define NEEDS_INITIALIZATION 0x11 + +static LIST_HEAD(clk_list); + +static void clk_reg_write_mask(u32 reg, uint32_t val, uint32_t mask) +{ + u32 val2; + + val2 = bfin_read32(reg); + val2 &= ~mask; + val2 |= val; + bfin_write32(reg, val2); +} + +int wait_for_pll_align(void) +{ + int i = 10000; + while (i-- && (bfin_read32(CGU0_STAT) & CGU0_STAT_CLKSALGN)); + + if (bfin_read32(CGU0_STAT) & CGU0_STAT_CLKSALGN) { + printk(KERN_CRIT "fail to align clk\n"); + return -1; + } + + return 0; +} + +int clk_enable(struct clk *clk) +{ + int ret = -EIO; + if (clk->ops && clk->ops->enable) + ret = clk->ops->enable(clk); + return ret; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ + if (clk->ops && clk->ops->disable) + clk->ops->disable(clk); +} +EXPORT_SYMBOL(clk_disable); + + +unsigned long clk_get_rate(struct clk *clk) +{ + unsigned long ret = 0; + if (clk->ops && clk->ops->get_rate) + ret = clk->ops->get_rate(clk); + return ret; +} +EXPORT_SYMBOL(clk_get_rate); + +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + long ret = 0; + if (clk->ops && clk->ops->round_rate) + ret = clk->ops->round_rate(clk, rate); + return ret; +} +EXPORT_SYMBOL(clk_round_rate); + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + int ret = -EIO; + if (clk->ops && clk->ops->set_rate) + ret = clk->ops->set_rate(clk, rate); + return ret; +} +EXPORT_SYMBOL(clk_set_rate); + +unsigned long vco_get_rate(struct clk *clk) +{ + return clk->rate; +} + +unsigned long pll_get_rate(struct clk *clk) +{ + u32 df; + u32 msel; + u32 ctl = bfin_read32(CGU0_CTL); + u32 stat = bfin_read32(CGU0_STAT); + if (stat & CGU0_STAT_PLLBP) + return 0; + msel = (ctl & CGU0_CTL_MSEL_MASK) >> CGU0_CTL_MSEL_SHIFT; + df = (ctl & CGU0_CTL_DF); + clk->parent->rate = clk_get_rate(clk->parent); + return clk->parent->rate / (df + 1) * msel * 2; +} + +unsigned long pll_round_rate(struct clk *clk, unsigned long rate) +{ + u32 div; + div = rate / clk->parent->rate; + return clk->parent->rate * div; +} + +int pll_set_rate(struct clk *clk, unsigned long rate) +{ + u32 msel; + u32 stat = bfin_read32(CGU0_STAT); + if (!(stat & CGU0_STAT_PLLEN)) + return -EBUSY; + if (!(stat & CGU0_STAT_PLLLK)) + return -EBUSY; + if (wait_for_pll_align()) + return -EBUSY; + msel = rate / clk->parent->rate / 2; + clk_reg_write_mask(CGU0_CTL, msel << CGU0_CTL_MSEL_SHIFT, + CGU0_CTL_MSEL_MASK); + clk->rate = rate; + return 0; +} + +unsigned long cclk_get_rate(struct clk *clk) +{ + if (clk->parent) + return clk->parent->rate; + else + return 0; +} + +unsigned long sys_clk_get_rate(struct clk *clk) +{ + unsigned long drate; + u32 msel; + u32 df; + u32 ctl = bfin_read32(CGU0_CTL); + u32 div = bfin_read32(CGU0_DIV); + div = (div & clk->mask) >> clk->shift; + msel = (ctl & CGU0_CTL_MSEL_MASK) >> CGU0_CTL_MSEL_SHIFT; + df = (ctl & CGU0_CTL_DF); + + if (!strcmp(clk->parent->name, "SYS_CLKIN")) { + drate = clk->parent->rate / (df + 1); + drate *= msel; + drate /= div; + return drate; + } else { + clk->parent->rate = clk_get_rate(clk->parent); + return clk->parent->rate / div; + } +} + +unsigned long dummy_get_rate(struct clk *clk) +{ + clk->parent->rate = clk_get_rate(clk->parent); + return clk->parent->rate; +} + +unsigned long sys_clk_round_rate(struct clk *clk, unsigned long rate) +{ + unsigned long max_rate; + unsigned long drate; + int i; + u32 msel; + u32 df; + u32 ctl = bfin_read32(CGU0_CTL); + + msel = (ctl & CGU0_CTL_MSEL_MASK) >> CGU0_CTL_MSEL_SHIFT; + df = (ctl & CGU0_CTL_DF); + max_rate = clk->parent->rate / (df + 1) * msel; + + if (rate > max_rate) + return 0; + + for (i = 1; i < clk->mask; i++) { + drate = max_rate / i; + if (rate >= drate) + return drate; + } + return 0; +} + +int sys_clk_set_rate(struct clk *clk, unsigned long rate) +{ + u32 div = bfin_read32(CGU0_DIV); + div = (div & clk->mask) >> clk->shift; + + rate = clk_round_rate(clk, rate); + + if (!rate) + return -EINVAL; + + div = (clk_get_rate(clk) * div) / rate; + + if (wait_for_pll_align()) + return -EBUSY; + clk_reg_write_mask(CGU0_DIV, div << clk->shift, + clk->mask); + clk->rate = rate; + return 0; +} + +static struct clk_ops vco_ops = { + .get_rate = vco_get_rate, +}; + +static struct clk_ops pll_ops = { + .get_rate = pll_get_rate, + .set_rate = pll_set_rate, +}; + +static struct clk_ops cclk_ops = { + .get_rate = cclk_get_rate, +}; + +static struct clk_ops sys_clk_ops = { + .get_rate = sys_clk_get_rate, + .set_rate = sys_clk_set_rate, + .round_rate = sys_clk_round_rate, +}; + +static struct clk_ops dummy_clk_ops = { + .get_rate = dummy_get_rate, +}; + +static struct clk sys_clkin = { + .name = "SYS_CLKIN", + .rate = CONFIG_CLKIN_HZ, + .ops = &vco_ops, +}; + +static struct clk pll_clk = { + .name = "PLLCLK", + .rate = 500000000, + .parent = &sys_clkin, + .ops = &pll_ops, + .flags = NEEDS_INITIALIZATION, +}; + +static struct clk cclk = { + .name = "CCLK", + .rate = 500000000, + .mask = CGU0_DIV_CSEL_MASK, + .shift = CGU0_DIV_CSEL_SHIFT, + .parent = &sys_clkin, + .ops = &sys_clk_ops, + .flags = NEEDS_INITIALIZATION, +}; + +static struct clk cclk0 = { + .name = "CCLK0", + .parent = &cclk, + .ops = &cclk_ops, +}; + +static struct clk cclk1 = { + .name = "CCLK1", + .parent = &cclk, + .ops = &cclk_ops, +}; + +static struct clk sysclk = { + .name = "SYSCLK", + .rate = 500000000, + .mask = CGU0_DIV_SYSSEL_MASK, + .shift = CGU0_DIV_SYSSEL_SHIFT, + .parent = &sys_clkin, + .ops = &sys_clk_ops, + .flags = NEEDS_INITIALIZATION, +}; + +static struct clk sclk0 = { + .name = "SCLK0", + .rate = 500000000, + .mask = CGU0_DIV_S0SEL_MASK, + .shift = CGU0_DIV_S0SEL_SHIFT, + .parent = &sysclk, + .ops = &sys_clk_ops, +}; + +static struct clk sclk1 = { + .name = "SCLK1", + .rate = 500000000, + .mask = CGU0_DIV_S1SEL_MASK, + .shift = CGU0_DIV_S1SEL_SHIFT, + .parent = &sysclk, + .ops = &sys_clk_ops, +}; + +static struct clk dclk = { + .name = "DCLK", + .rate = 500000000, + .mask = CGU0_DIV_DSEL_MASK, + .shift = CGU0_DIV_DSEL_SHIFT, + .parent = &sys_clkin, + .ops = &sys_clk_ops, +}; + +static struct clk oclk = { + .name = "OCLK", + .rate = 500000000, + .mask = CGU0_DIV_OSEL_MASK, + .shift = CGU0_DIV_OSEL_SHIFT, + .parent = &pll_clk, +}; + +static struct clk ethclk = { + .name = "stmmaceth", + .parent = &sclk0, + .ops = &dummy_clk_ops, +}; + +static struct clk spiclk = { + .name = "spi", + .parent = &sclk1, + .ops = &dummy_clk_ops, +}; + +static struct clk_lookup bf609_clks[] = { + CLK(sys_clkin, NULL, "SYS_CLKIN"), + CLK(pll_clk, NULL, "PLLCLK"), + CLK(cclk, NULL, "CCLK"), + CLK(cclk0, NULL, "CCLK0"), + CLK(cclk1, NULL, "CCLK1"), + CLK(sysclk, NULL, "SYSCLK"), + CLK(sclk0, NULL, "SCLK0"), + CLK(sclk1, NULL, "SCLK1"), + CLK(dclk, NULL, "DCLK"), + CLK(oclk, NULL, "OCLK"), + CLK(ethclk, NULL, "stmmaceth"), + CLK(spiclk, NULL, "spi"), +}; + +int __init clk_init(void) +{ + int i; + struct clk *clkp; + for (i = 0; i < ARRAY_SIZE(bf609_clks); i++) { + clkp = bf609_clks[i].clk; + if (clkp->flags & NEEDS_INITIALIZATION) + clk_get_rate(clkp); + } + clkdev_add_table(bf609_clks, ARRAY_SIZE(bf609_clks)); + return 0; +} diff --git a/arch/blackfin/mach-bf609/dma.c b/arch/blackfin/mach-bf609/dma.c new file mode 100644 index 00000000000..1da4b38ac22 --- /dev/null +++ b/arch/blackfin/mach-bf609/dma.c @@ -0,0 +1,202 @@ +/* + * the simple DMA Implementation for Blackfin + * + * Copyright 2007-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/module.h> + +#include <asm/blackfin.h> +#include <asm/dma.h> + +struct dma_register * const dma_io_base_addr[MAX_DMA_CHANNELS] = { + (struct dma_register *) DMA0_NEXT_DESC_PTR, + (struct dma_register *) DMA1_NEXT_DESC_PTR, + (struct dma_register *) DMA2_NEXT_DESC_PTR, + (struct dma_register *) DMA3_NEXT_DESC_PTR, + (struct dma_register *) DMA4_NEXT_DESC_PTR, + (struct dma_register *) DMA5_NEXT_DESC_PTR, + (struct dma_register *) DMA6_NEXT_DESC_PTR, + (struct dma_register *) DMA7_NEXT_DESC_PTR, + (struct dma_register *) DMA8_NEXT_DESC_PTR, + (struct dma_register *) DMA9_NEXT_DESC_PTR, + (struct dma_register *) DMA10_NEXT_DESC_PTR, + (struct dma_register *) DMA11_NEXT_DESC_PTR, + (struct dma_register *) DMA12_NEXT_DESC_PTR, + (struct dma_register *) DMA13_NEXT_DESC_PTR, + (struct dma_register *) DMA14_NEXT_DESC_PTR, + (struct dma_register *) DMA15_NEXT_DESC_PTR, + (struct dma_register *) DMA16_NEXT_DESC_PTR, + (struct dma_register *) DMA17_NEXT_DESC_PTR, + (struct dma_register *) DMA18_NEXT_DESC_PTR, + (struct dma_register *) DMA19_NEXT_DESC_PTR, + (struct dma_register *) DMA20_NEXT_DESC_PTR, + (struct dma_register *) MDMA0_SRC_CRC0_NEXT_DESC_PTR, + (struct dma_register *) MDMA0_DEST_CRC0_NEXT_DESC_PTR, + (struct dma_register *) MDMA1_SRC_CRC1_NEXT_DESC_PTR, + (struct dma_register *) MDMA1_DEST_CRC1_NEXT_DESC_PTR, + (struct dma_register *) MDMA2_SRC_NEXT_DESC_PTR, + (struct dma_register *) MDMA2_DEST_NEXT_DESC_PTR, + (struct dma_register *) MDMA3_SRC_NEXT_DESC_PTR, + (struct dma_register *) MDMA3_DEST_NEXT_DESC_PTR, + (struct dma_register *) DMA29_NEXT_DESC_PTR, + (struct dma_register *) DMA30_NEXT_DESC_PTR, + (struct dma_register *) DMA31_NEXT_DESC_PTR, + (struct dma_register *) DMA32_NEXT_DESC_PTR, + (struct dma_register *) DMA33_NEXT_DESC_PTR, + (struct dma_register *) DMA34_NEXT_DESC_PTR, + (struct dma_register *) DMA35_NEXT_DESC_PTR, + (struct dma_register *) DMA36_NEXT_DESC_PTR, + (struct dma_register *) DMA37_NEXT_DESC_PTR, + (struct dma_register *) DMA38_NEXT_DESC_PTR, + (struct dma_register *) DMA39_NEXT_DESC_PTR, + (struct dma_register *) DMA40_NEXT_DESC_PTR, + (struct dma_register *) DMA41_NEXT_DESC_PTR, + (struct dma_register *) DMA42_NEXT_DESC_PTR, + (struct dma_register *) DMA43_NEXT_DESC_PTR, + (struct dma_register *) DMA44_NEXT_DESC_PTR, + (struct dma_register *) DMA45_NEXT_DESC_PTR, + (struct dma_register *) DMA46_NEXT_DESC_PTR, +}; +EXPORT_SYMBOL(dma_io_base_addr); + +int channel2irq(unsigned int channel) +{ + int ret_irq = -1; + + switch (channel) { + case CH_SPORT0_RX: + ret_irq = IRQ_SPORT0_RX; + break; + case CH_SPORT0_TX: + ret_irq = IRQ_SPORT0_TX; + break; + case CH_SPORT1_RX: + ret_irq = IRQ_SPORT1_RX; + break; + case CH_SPORT1_TX: + ret_irq = IRQ_SPORT1_TX; + break; + case CH_SPORT2_RX: + ret_irq = IRQ_SPORT2_RX; + break; + case CH_SPORT2_TX: + ret_irq = IRQ_SPORT2_TX; + break; + case CH_SPI0_TX: + ret_irq = IRQ_SPI0_TX; + break; + case CH_SPI0_RX: + ret_irq = IRQ_SPI0_RX; + break; + case CH_SPI1_TX: + ret_irq = IRQ_SPI1_TX; + break; + case CH_SPI1_RX: + ret_irq = IRQ_SPI1_RX; + break; + case CH_RSI: + ret_irq = IRQ_RSI; + break; + case CH_SDU: + ret_irq = IRQ_SDU; + break; + case CH_LP0: + ret_irq = IRQ_LP0; + break; + case CH_LP1: + ret_irq = IRQ_LP1; + break; + case CH_LP2: + ret_irq = IRQ_LP2; + break; + case CH_LP3: + ret_irq = IRQ_LP3; + break; + case CH_UART0_RX: + ret_irq = IRQ_UART0_RX; + break; + case CH_UART0_TX: + ret_irq = IRQ_UART0_TX; + break; + case CH_UART1_RX: + ret_irq = IRQ_UART1_RX; + break; + case CH_UART1_TX: + ret_irq = IRQ_UART1_TX; + break; + case CH_EPPI0_CH0: + ret_irq = IRQ_EPPI0_CH0; + break; + case CH_EPPI0_CH1: + ret_irq = IRQ_EPPI0_CH1; + break; + case CH_EPPI1_CH0: + ret_irq = IRQ_EPPI1_CH0; + break; + case CH_EPPI1_CH1: + ret_irq = IRQ_EPPI1_CH1; + break; + case CH_EPPI2_CH0: + ret_irq = IRQ_EPPI2_CH0; + break; + case CH_EPPI2_CH1: + ret_irq = IRQ_EPPI2_CH1; + break; + case CH_PIXC_CH0: + ret_irq = IRQ_PIXC_CH0; + break; + case CH_PIXC_CH1: + ret_irq = IRQ_PIXC_CH1; + break; + case CH_PIXC_CH2: + ret_irq = IRQ_PIXC_CH2; + break; + case CH_PVP_CPDOB: + ret_irq = IRQ_PVP_CPDOB; + break; + case CH_PVP_CPDOC: + ret_irq = IRQ_PVP_CPDOC; + break; + case CH_PVP_CPSTAT: + ret_irq = IRQ_PVP_CPSTAT; + break; + case CH_PVP_CPCI: + ret_irq = IRQ_PVP_CPCI; + break; + case CH_PVP_MPDO: + ret_irq = IRQ_PVP_MPDO; + break; + case CH_PVP_MPDI: + ret_irq = IRQ_PVP_MPDI; + break; + case CH_PVP_MPSTAT: + ret_irq = IRQ_PVP_MPSTAT; + break; + case CH_PVP_MPCI: + ret_irq = IRQ_PVP_MPCI; + break; + case CH_PVP_CPDOA: + ret_irq = IRQ_PVP_CPDOA; + break; + case CH_MEM_STREAM0_SRC: + case CH_MEM_STREAM0_DEST: + ret_irq = IRQ_MDMAS0; + break; + case CH_MEM_STREAM1_SRC: + case CH_MEM_STREAM1_DEST: + ret_irq = IRQ_MDMAS1; + break; + case CH_MEM_STREAM2_SRC: + case CH_MEM_STREAM2_DEST: + ret_irq = IRQ_MDMAS2; + break; + case CH_MEM_STREAM3_SRC: + case CH_MEM_STREAM3_DEST: + ret_irq = IRQ_MDMAS3; + break; + } + return ret_irq; +} diff --git a/arch/blackfin/mach-bf609/dpm.S b/arch/blackfin/mach-bf609/dpm.S new file mode 100644 index 00000000000..54d50c689db --- /dev/null +++ b/arch/blackfin/mach-bf609/dpm.S @@ -0,0 +1,157 @@ +#include <linux/linkage.h> +#include <asm/blackfin.h> +#include <asm/dpmc.h> + +#include <asm/context.S> + +#define PM_STACK (COREA_L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12) + +.section .l1.text +ENTRY(_enter_hibernate) + /* switch stack to L1 scratch, prepare for ddr srfr */ + P0.H = HI(PM_STACK); + P0.L = LO(PM_STACK); + SP = P0; + + call _bf609_ddr_sr; + call _bfin_hibernate_syscontrol; + + P0.H = HI(DPM0_RESTORE4); + P0.L = LO(DPM0_RESTORE4); + P1.H = _bf609_pm_data; + P1.L = _bf609_pm_data; + [P0] = P1; + + P0.H = HI(DPM0_CTL); + P0.L = LO(DPM0_CTL); + R3.H = HI(0x00000010); + R3.L = LO(0x00000010); + + bfin_init_pm_bench_cycles; + + [P0] = R3; + + SSYNC; +ENDPROC(_enter_hibernate) + +/* DPM wake up interrupt won't wake up core on bf60x if its core IMASK + * is disabled. This behavior differ from bf5xx serial processor. + */ +ENTRY(_dummy_deepsleep) + [--sp] = SYSCFG; + [--sp] = (R7:0,P5:0); + cli r0; + + /* get wake up interrupt ID */ + P0.l = LO(SEC_SCI_BASE + SEC_CSID); + P0.h = HI(SEC_SCI_BASE + SEC_CSID); + R0 = [P0]; + + /* ACK wake up interrupt in SEC */ + P1.l = LO(SEC_END); + P1.h = HI(SEC_END); + + [P1] = R0; + SSYNC; + + /* restore EVT 11 entry */ + p0.h = hi(EVT11); + p0.l = lo(EVT11); + p1.h = _evt_evt11; + p1.l = _evt_evt11; + + [p0] = p1; + SSYNC; + + (R7:0,P5:0) = [sp++]; + SYSCFG = [sp++]; + RTI; +ENDPROC(_dummy_deepsleep) + +ENTRY(_enter_deepsleep) + LINK 0xC; + [--sp] = (R7:0,P5:0); + + /* Change EVT 11 entry to dummy handler for wake up event */ + p0.h = hi(EVT11); + p0.l = lo(EVT11); + p1.h = _dummy_deepsleep; + p1.l = _dummy_deepsleep; + + [p0] = p1; + + P0.H = HI(PM_STACK); + P0.L = LO(PM_STACK); + + EX_SCRATCH_REG = SP; + SP = P0; + + SSYNC; + + /* should put ddr to self refresh mode before sleep */ + call _bf609_ddr_sr; + + /* Set DPM controller to deep sleep mode */ + P0.H = HI(DPM0_CTL); + P0.L = LO(DPM0_CTL); + R3.H = HI(0x00000008); + R3.L = LO(0x00000008); + [P0] = R3; + CSYNC; + + /* Enable evt 11 in IMASK before idle, otherwise core doesn't wake up. */ + r0.l = 0x800; + r0.h = 0; + sti r0; + SSYNC; + + bfin_init_pm_bench_cycles; + + /* Fall into deep sleep in idle*/ + idle; + SSYNC; + + /* Restore PLL after wake up from deep sleep */ + call _bf609_resume_ccbuf; + + /* turn ddr out of self refresh mode */ + call _bf609_ddr_sr_exit; + + SP = EX_SCRATCH_REG; + + (R7:0,P5:0) = [SP++]; + UNLINK; + RTS; +ENDPROC(_enter_deepsleep) + +.section .text +ENTRY(_bf609_hibernate) + bfin_cpu_reg_save; + bfin_core_mmr_save; + + P0.H = _bf609_pm_data; + P0.L = _bf609_pm_data; + R1.H = 0xDEAD; + R1.L = 0xBEEF; + R2.H = .Lpm_resume_here; + R2.L = .Lpm_resume_here; + [P0++] = R1; + [P0++] = R2; + [P0++] = SP; + + P1.H = _enter_hibernate; + P1.L = _enter_hibernate; + + call (P1); +.Lpm_resume_here: + + bfin_core_mmr_restore; + bfin_cpu_reg_restore; + + [--sp] = RETI; /* Clear Global Interrupt Disable */ + SP += 4; + + RTS; + +ENDPROC(_bf609_hibernate) + diff --git a/arch/blackfin/mach-bf609/include/mach/anomaly.h b/arch/blackfin/mach-bf609/include/mach/anomaly.h new file mode 100644 index 00000000000..696786e9a53 --- /dev/null +++ b/arch/blackfin/mach-bf609/include/mach/anomaly.h @@ -0,0 +1,137 @@ +/* + * DO NOT EDIT THIS FILE + * This file is under version control at + * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/ + * and can be replaced with that version at any time + * DO NOT EDIT THIS FILE + * + * Copyright 2004-2012 Analog Devices Inc. + * Licensed under the Clear BSD license. + */ + +/* This file should be up to date with: + * - Revision A, 15/06/2012; ADSP-BF609 Blackfin Processor Anomaly List + */ + +#if __SILICON_REVISION__ < 0 +# error will not work on BF609 silicon version +#endif + +#ifndef _MACH_ANOMALY_H_ +#define _MACH_ANOMALY_H_ + +/* TRU_STAT.ADDRERR and TRU_ERRADDR.ADDR May Not Reflect the Correct Status */ +#define ANOMALY_16000003 (1) +/* The EPPI Data Enable (DEN) Signal is Not Functional */ +#define ANOMALY_16000004 (__SILICON_REVISION__ < 1) +/* Using L1 Instruction Cache with Parity Enabled is Unreliable */ +#define ANOMALY_16000005 (__SILICON_REVISION__ < 1) +/* SEQSTAT.SYSNMI Clears Upon Entering the NMI ISR */ +#define ANOMALY_16000006 (__SILICON_REVISION__ < 1) +/* DDR2 Memory Reads May Fail Intermittently */ +#define ANOMALY_16000007 (1) +/* Instruction Memory Stalls Can Cause IFLUSH to Fail */ +#define ANOMALY_16000008 (1) +/* TestSET Instruction Cannot Be Interrupted */ +#define ANOMALY_16000009 (1) +/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ +#define ANOMALY_16000010 (1) +/* False Hardware Error when RETI Points to Invalid Memory */ +#define ANOMALY_16000011 (1) +/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */ +#define ANOMALY_16000012 (1) +/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ +#define ANOMALY_16000013 (1) +/* False Hardware Error from an Access in the Shadow of a Conditional Branch */ +#define ANOMALY_16000014 (1) +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ +#define ANOMALY_16000015 (1) +/* Speculative Fetches Can Cause Undesired External FIFO Operations */ +#define ANOMALY_16000017 (1) +/* RSI Boot Cleanup Routine Does Not Clear Registers */ +#define ANOMALY_16000018 (__SILICON_REVISION__ < 1) +/* SPI Master Boot Device Auto-detection Frequency is Set Incorrectly */ +#define ANOMALY_16000019 (__SILICON_REVISION__ < 1) +/* rom_SysControl() Fails to Set DDR0_CTL.INIT for Wakeup From Hibernate */ +#define ANOMALY_16000020 (__SILICON_REVISION__ < 1) +/* rom_SysControl() Fails to Save and Restore DDR0_PHYCTL3 for Hibernate/Wakeup Sequence */ +#define ANOMALY_16000021 (__SILICON_REVISION__ < 1) +/* Boot Code Fails to Enable Parity Fault Detection */ +#define ANOMALY_16000022 (__SILICON_REVISION__ < 1) +/* Rom_SysControl Does not Update CGU0_CLKOUTSEL */ +#define ANOMALY_16000023 (__SILICON_REVISION__ < 1) +/* Spurious Fault Signaled After Clearing an Externally Generated Fault */ +#define ANOMALY_16000024 (1) +/* SPORT May Drive Data Pins During Inactive Channels in Multichannel Mode */ +#define ANOMALY_16000025 (1) +/* USB DMA interrupt status do not show the DMA channel interrupt in the DMA ISR */ +#define ANOMALY_16000027 (__SILICON_REVISION__ < 1) +/* Default SPI Master Boot Mode Setting is Incorrect */ +#define ANOMALY_16000028 (__SILICON_REVISION__ < 1) +/* PPI tDFSPI Timing Does Not Meet Data Sheet Specification */ +#define ANOMALY_16000027 (__SILICON_REVISION__ < 1) +/* Interrupted Core Reads of MMRs May Cause Data Loss */ +#define ANOMALY_16000030 (__SILICON_REVISION__ < 1) +/* Incorrect Default USB_PLL_OSC.PLLM Value */ +#define ANOMALY_16000031 (__SILICON_REVISION__ < 1) +/* Core Reads of System MMRs May Cause the Core to Hang */ +#define ANOMALY_16000032 (__SILICON_REVISION__ < 1) +/* PPI Data Underflow on First Word Not Reported in Certain Modes */ +#define ANOMALY_16000033 (1) +/* CNV1 Red Pixel Substitution feature not functional in the PVP */ +#define ANOMALY_16000034 (__SILICON_REVISION__ < 1) +/* IPF0 Output Port Color Separation feature not functional */ +#define ANOMALY_16000035 (__SILICON_REVISION__ < 1) +/* Spurious USB Wake From Hibernate May Occur When USB_VBUS is Low */ +#define ANOMALY_16000036 (__SILICON_REVISION__ < 1) +/* Core RAISE 2 Instruction Not Latched When Executed at Priority Level 0, 1, or 2 */ +#define ANOMALY_16000037 (__SILICON_REVISION__ < 1) +/* Spurious Unhandled NMI or L1 Memory Parity Error Interrupt May Occur Upon Entering the NMI ISR */ +#define ANOMALY_16000038 (__SILICON_REVISION__ < 1) +/* CGU_STAT.PLOCKERR Bit May be Unreliable */ +#define ANOMALY_16000039 (1) +/* JTAG Emulator Reads of SDU_IDCODE Alter Register Contents */ +#define ANOMALY_16000040 (1) +/* IFLUSH Instruction Causes Parity Error When Parity Is Enabled */ +#define ANOMALY_16000041 (1) +/* Instruction Cache Failure When Parity Is Enabled */ +#define ANOMALY_16000042 (__SILICON_REVISION__ == 1) + +/* Anomalies that don't exist on this proc */ +#define ANOMALY_05000158 (0) +#define ANOMALY_05000189 (0) +#define ANOMALY_05000198 (0) +#define ANOMALY_05000220 (0) +#define ANOMALY_05000230 (0) +#define ANOMALY_05000231 (0) +#define ANOMALY_05000244 (0) +#define ANOMALY_05000263 (0) +#define ANOMALY_05000273 (0) +#define ANOMALY_05000274 (0) +#define ANOMALY_05000278 (0) +#define ANOMALY_05000281 (0) +#define ANOMALY_05000287 (0) +#define ANOMALY_05000311 (0) +#define ANOMALY_05000312 (0) +#define ANOMALY_05000323 (0) +#define ANOMALY_05000363 (0) +#define ANOMALY_05000380 (0) +#define ANOMALY_05000448 (0) +#define ANOMALY_05000450 (0) +#define ANOMALY_05000456 (0) +#define ANOMALY_05000480 (0) +#define ANOMALY_05000481 (1) + +/* Reuse BF5xx anomalies IDs for the same anomaly in BF60x */ +#define ANOMALY_05000491 ANOMALY_16000008 +#define ANOMALY_05000477 ANOMALY_16000009 +#define ANOMALY_05000443 ANOMALY_16000010 +#define ANOMALY_05000461 ANOMALY_16000011 +#define ANOMALY_05000426 ANOMALY_16000012 +#define ANOMALY_05000310 ANOMALY_16000013 +#define ANOMALY_05000245 ANOMALY_16000014 +#define ANOMALY_05000074 ANOMALY_16000015 +#define ANOMALY_05000416 ANOMALY_16000017 + + +#endif diff --git a/arch/blackfin/mach-bf609/include/mach/bf609.h b/arch/blackfin/mach-bf609/include/mach/bf609.h new file mode 100644 index 00000000000..c897c2a2fbf --- /dev/null +++ b/arch/blackfin/mach-bf609/include/mach/bf609.h @@ -0,0 +1,93 @@ +/* + * Copyright 2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __MACH_BF609_H__ +#define __MACH_BF609_H__ + +#define OFFSET_(x) ((x) & 0x0000FFFF) + +/*some misc defines*/ +#define IMASK_IVG15 0x8000 +#define IMASK_IVG14 0x4000 +#define IMASK_IVG13 0x2000 +#define IMASK_IVG12 0x1000 + +#define IMASK_IVG11 0x0800 +#define IMASK_IVG10 0x0400 +#define IMASK_IVG9 0x0200 +#define IMASK_IVG8 0x0100 + +#define IMASK_IVG7 0x0080 +#define IMASK_IVGTMR 0x0040 +#define IMASK_IVGHW 0x0020 + +/***************************/ + + +#define BFIN_DSUBBANKS 4 +#define BFIN_DWAYS 2 +#define BFIN_DLINES 64 +#define BFIN_ISUBBANKS 4 +#define BFIN_IWAYS 4 +#define BFIN_ILINES 32 + +#define WAY0_L 0x1 +#define WAY1_L 0x2 +#define WAY01_L 0x3 +#define WAY2_L 0x4 +#define WAY02_L 0x5 +#define WAY12_L 0x6 +#define WAY012_L 0x7 + +#define WAY3_L 0x8 +#define WAY03_L 0x9 +#define WAY13_L 0xA +#define WAY013_L 0xB + +#define WAY32_L 0xC +#define WAY320_L 0xD +#define WAY321_L 0xE +#define WAYALL_L 0xF + +#define DMC_ENABLE (2<<2) /*yes, 2, not 1 */ + +/********************************* EBIU Settings ************************************/ +#define AMBCTL0VAL ((CONFIG_BANK_1 << 16) | CONFIG_BANK_0) +#define AMBCTL1VAL ((CONFIG_BANK_3 << 16) | CONFIG_BANK_2) + +#ifdef CONFIG_C_AMBEN_ALL +#define V_AMBEN AMBEN_ALL +#endif +#ifdef CONFIG_C_AMBEN +#define V_AMBEN 0x0 +#endif +#ifdef CONFIG_C_AMBEN_B0 +#define V_AMBEN AMBEN_B0 +#endif +#ifdef CONFIG_C_AMBEN_B0_B1 +#define V_AMBEN AMBEN_B0_B1 +#endif +#ifdef CONFIG_C_AMBEN_B0_B1_B2 +#define V_AMBEN AMBEN_B0_B1_B2 +#endif +#ifdef CONFIG_C_AMCKEN +#define V_AMCKEN AMCKEN +#else +#define V_AMCKEN 0x0 +#endif + +#define AMGCTLVAL (V_AMBEN | V_AMCKEN) + +#if defined(CONFIG_BF609) +# define CPU "BF609" +# define CPUID 0x27fe /* temperary fake value */ +#endif + +#ifndef CPU +#error "Unknown CPU type - This kernel doesn't seem to be configured properly" +#endif + +#endif /* __MACH_BF609_H__ */ diff --git a/arch/blackfin/mach-bf609/include/mach/bfin_serial.h b/arch/blackfin/mach-bf609/include/mach/bfin_serial.h new file mode 100644 index 00000000000..1fd398147fd --- /dev/null +++ b/arch/blackfin/mach-bf609/include/mach/bfin_serial.h @@ -0,0 +1,17 @@ +/* + * mach/bfin_serial.h - Blackfin UART/Serial definitions + * + * Copyright 2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __BFIN_MACH_SERIAL_H__ +#define __BFIN_MACH_SERIAL_H__ + +#define BFIN_UART_NR_PORTS 2 +#define BFIN_UART_TX_FIFO_SIZE 8 + +#define BFIN_UART_BF60X_STYLE + +#endif diff --git a/arch/blackfin/mach-bf609/include/mach/blackfin.h b/arch/blackfin/mach-bf609/include/mach/blackfin.h new file mode 100644 index 00000000000..b1a48c41071 --- /dev/null +++ b/arch/blackfin/mach-bf609/include/mach/blackfin.h @@ -0,0 +1,25 @@ +/* + * Copyright 2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _MACH_BLACKFIN_H_ +#define _MACH_BLACKFIN_H_ + +#include "bf609.h" +#include "anomaly.h" + +#include <asm/def_LPBlackfin.h> +#ifdef CONFIG_BF609 +# include "defBF609.h" +#endif + +#ifndef __ASSEMBLY__ +# include <asm/cdef_LPBlackfin.h> +# ifdef CONFIG_BF609 +# include "cdefBF609.h" +# endif +#endif + +#endif diff --git a/arch/blackfin/mach-bf609/include/mach/cdefBF609.h b/arch/blackfin/mach-bf609/include/mach/cdefBF609.h new file mode 100644 index 00000000000..c4f3fe19acd --- /dev/null +++ b/arch/blackfin/mach-bf609/include/mach/cdefBF609.h @@ -0,0 +1,15 @@ +/* + * Copyright 2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _CDEF_BF609_H +#define _CDEF_BF609_H + +/* include cdefBF60x_base.h for the set of #defines that are common to all ADSP-BF60x bfin_read_()rocessors */ +#include "cdefBF60x_base.h" + +/* The following are the #defines needed by ADSP-BF609 that are not in the common header */ + +#endif /* _CDEF_BF609_H */ diff --git a/arch/blackfin/mach-bf609/include/mach/cdefBF60x_base.h b/arch/blackfin/mach-bf609/include/mach/cdefBF60x_base.h new file mode 100644 index 00000000000..102ee4025ac --- /dev/null +++ b/arch/blackfin/mach-bf609/include/mach/cdefBF60x_base.h @@ -0,0 +1,3254 @@ +/* + * Copyright 2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _CDEF_BF60X_H +#define _CDEF_BF60X_H + +/* ************************************************************** */ +/* SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF60x */ +/* ************************************************************** */ + +/* Debug/MP/Emulation Registers (0xFFC00014 - 0xFFC00014) */ + +#define bfin_read_CHIPID() bfin_read32(CHIPID) +#define bfin_write_CHIPID(val) bfin_write32(CHIPID, val) + +/* System Reset and Interrubfin_read_()t Controller (0xFFC00100 - 0xFFC00104) */ + +/* SEC0 Registers */ +#define bfin_read_SEC0_CCTL() bfin_read32(SEC0_CCTL) +#define bfin_write_SEC0_CCTL(val) bfin_write32(SEC0_CCTL, val) +#define bfin_read_SEC0_CSID() bfin_read32(SEC0_CSID) +#define bfin_write_SEC0_CSID(val) bfin_write32(SEC0_CSID, val) +#define bfin_read_SEC_GCTL() bfin_read32(SEC_GCTL) +#define bfin_write_SEC_GCTL(val) bfin_write32(SEC_GCTL, val) + +#define bfin_read_SEC_FCTL() bfin_read32(SEC_FCTL) +#define bfin_write_SEC_FCTL(val) bfin_write32(SEC_FCTL, val) + +#define bfin_read_SEC_SCTL(sid) bfin_read32((SEC_SCTL0 + (sid) * 8)) +#define bfin_write_SEC_SCTL(sid, val) bfin_write32((SEC_SCTL0 + (sid) * 8), val) + +#define bfin_read_SEC_SSTAT(sid) bfin_read32((SEC_SSTAT0 + (sid) * 8)) +#define bfin_write_SEC_SSTAT(sid, val) bfin_write32((SEC_SSTAT0 + (sid) * 8), val) + +/* RCU0 Registers */ +#define bfin_read_RCU0_CTL() bfin_read32(RCU0_CTL) +#define bfin_write_RCU0_CTL(val) bfin_write32(RCU0_CTL, val) + +/* Watchdog Timer Registers */ +#define bfin_read_WDOG_CTL() bfin_read16(WDOG_CTL) +#define bfin_write_WDOG_CTL(val) bfin_write16(WDOG_CTL, val) +#define bfin_read_WDOG_CNT() bfin_read32(WDOG_CNT) +#define bfin_write_WDOG_CNT(val) bfin_write32(WDOG_CNT, val) +#define bfin_read_WDOG_STAT() bfin_read32(WDOG_STAT) +#define bfin_write_WDOG_STAT(val) bfin_write32(WDOG_STAT, val) + +/* RTC Registers */ + +/* UART0 Registers */ + +#define bfin_read_UART0_REVID() bfin_read32(UART0_REVID) +#define bfin_write_UART0_REVID(val) bfin_write32(UART0_REVID, val) +#define bfin_read_UART0_GCTL() bfin_read32(UART0_GCTL) +#define bfin_write_UART0_GCTL(val) bfin_write32(UART0_GCTL, val) +#define bfin_read_UART0_STAT() bfin_read32(UART0_STAT) +#define bfin_write_UART0_STAT(val) bfin_write32(UART0_STAT, val) +#define bfin_read_UART0_SCR() bfin_read32(UART0_SCR) +#define bfin_write_UART0_SCR(val) bfin_write32(UART0_SCR, val) +#define bfin_read_UART0_CLK() bfin_read32(UART0_CLK) +#define bfin_write_UART0_CLK(val) bfin_write32(UART0_CLK, val) +#define bfin_read_UART0_IER() bfin_read32(UART0_IER) +#define bfin_write_UART0_IER(val) bfin_write32(UART0_IER, val) +#define bfin_read_UART0_IER_SET() bfin_read32(UART0_IER_SET) +#define bfin_write_UART0_IER_SET(val) bfin_write32(UART0_IER_SET, val) +#define bfin_read_UART0_IER_CLEAR() bfin_read32(UART0_IER_CLEAR) +#define bfin_write_UART0_IER_CLEAR(val) bfin_write32(UART0_IER_CLEAR, val) +#define bfin_read_UART0_RBR() bfin_read32(UART0_RBR) +#define bfin_write_UART0_RBR(val) bfin_write32(UART0_RBR, val) +#define bfin_read_UART0_THR() bfin_read32(UART0_THR) +#define bfin_write_UART0_THR(val) bfin_write32(UART0_THR, val) +#define bfin_read_UART0_TAIP() bfin_read32(UART0_TAIP) +#define bfin_write_UART0_TAIP(val) bfin_write32(UART0_TAIP, val) +#define bfin_read_UART0_TSR() bfin_read32(UART0_TSR) +#define bfin_write_UART0_TSR(val) bfin_write32(UART0_TSR, val) +#define bfin_read_UART0_RSR() bfin_read32(UART0_RSR) +#define bfin_write_UART0_RSR(val) bfin_write32(UART0_RSR, val) +#define bfin_read_UART0_TXCNT() bfin_read32(UART0_TXCNT) +#define bfin_write_UART0_TXCNT(val) bfin_write32(UART0_TXCNT, val) +#define bfin_read_UART0_RXCNT() bfin_read32(UART0_RXCNT) +#define bfin_write_UART0_RXCNT(val) bfin_write32(UART0_RXCNT, val) + +/* UART1 Registers */ + +#define bfin_read_UART1_REVID() bfin_read32(UART1_REVID) +#define bfin_write_UART1_REVID(val) bfin_write32(UART1_REVID, val) +#define bfin_read_UART1_GCTL() bfin_read32(UART1_GCTL) +#define bfin_write_UART1_GCTL(val) bfin_write32(UART1_GCTL, val) +#define bfin_read_UART1_STAT() bfin_read32(UART1_STAT) +#define bfin_write_UART1_STAT(val) bfin_write32(UART1_STAT, val) +#define bfin_read_UART1_SCR() bfin_read32(UART1_SCR) +#define bfin_write_UART1_SCR(val) bfin_write32(UART1_SCR, val) +#define bfin_read_UART1_CLK() bfin_read32(UART1_CLK) +#define bfin_write_UART1_CLK(val) bfin_write32(UART1_CLK, val) +#define bfin_read_UART1_IER() bfin_read32(UART1_IER) +#define bfin_write_UART1_IER(val) bfin_write32(UART1_IER, val) +#define bfin_read_UART1_IER_SET() bfin_read32(UART1_IER_SET) +#define bfin_write_UART1_IER_SET(val) bfin_write32(UART1_IER_SET, val) +#define bfin_read_UART1_IER_CLEAR() bfin_read32(UART1_IER_CLEAR) +#define bfin_write_UART1_IER_CLEAR(val) bfin_write32(UART1_IER_CLEAR, val) +#define bfin_read_UART1_RBR() bfin_read32(UART1_RBR) +#define bfin_write_UART1_RBR(val) bfin_write32(UART1_RBR, val) +#define bfin_read_UART1_THR() bfin_read32(UART1_THR) +#define bfin_write_UART1_THR(val) bfin_write32(UART1_THR, val) +#define bfin_read_UART1_TAIP() bfin_read32(UART1_TAIP) +#define bfin_write_UART1_TAIP(val) bfin_write32(UART1_TAIP, val) +#define bfin_read_UART1_TSR() bfin_read32(UART1_TSR) +#define bfin_write_UART1_TSR(val) bfin_write32(UART1_TSR, val) +#define bfin_read_UART1_RSR() bfin_read32(UART1_RSR) +#define bfin_write_UART1_RSR(val) bfin_write32(UART1_RSR, val) +#define bfin_read_UART1_TXCNT() bfin_read32(UART1_TXCNT) +#define bfin_write_UART1_TXCNT(val) bfin_write32(UART1_TXCNT, val) +#define bfin_read_UART1_RXCNT() bfin_read32(UART1_RXCNT) +#define bfin_write_UART1_RXCNT(val) bfin_write32(UART1_RXCNT, val) + + +/* SPI0 Registers */ + +#define bfin_read_SPI0_CTL() bfin_read32(SPI0_CTL) +#define bfin_write_SPI0_CTL(val) bfin_write32(SPI0_CTL, val) +#define bfin_read_SPI0_RXCTL() bfin_read32(SPI0_RXCTL) +#define bfin_write_SPI0_RXCTL(val) bfin_write32(SPI0_RXCTL, val) +#define bfin_read_SPI0_TXCTL() bfin_read32(SPI0_TXCTL) +#define bfin_write_SPI0_TXCTL(val) bfin_write32(SPI0_TXCTL, val) +#define bfin_read_SPI0_CLK() bfin_read32(SPI0_CLK) +#define bfin_write_SPI0_CLK(val) bfin_write32(SPI0_CLK, val) +#define bfin_read_SPI0_DLY() bfin_read32(SPI0_DLY) +#define bfin_write_SPI0_DLY(val) bfin_write32(SPI0_DLY, val) +#define bfin_read_SPI0_SLVSEL() bfin_read32(SPI0_SLVSEL) +#define bfin_write_SPI0_SLVSEL(val) bfin_write32(SPI0_SLVSEL, val) +#define bfin_read_SPI0_RWC() bfin_read32(SPI0_RWC) +#define bfin_write_SPI0_RWC(val) bfin_write32(SPI0_RWC, val) +#define bfin_read_SPI0_RWCR() bfin_read32(SPI0_RWCR) +#define bfin_write_SPI0_RWCR(val) bfin_write32(SPI0_RWCR, val) +#define bfin_read_SPI0_TWC() bfin_read32(SPI0_TWC) +#define bfin_write_SPI0_TWC(val) bfin_write32(SPI0_TWC, val) +#define bfin_read_SPI0_TWCR() bfin_read32(SPI0_TWCR) +#define bfin_write_SPI0_TWCR(val) bfin_write32(SPI0_TWCR, val) +#define bfin_read_SPI0_IMSK() bfin_read32(SPI0_IMSK) +#define bfin_write_SPI0_IMSK(val) bfin_write32(SPI0_IMSK, val) +#define bfin_read_SPI0_IMSK_CLR() bfin_read32(SPI0_IMSK_CLR) +#define bfin_write_SPI0_IMSK_CLR(val) bfin_write32(SPI0_IMSK_CLR, val) +#define bfin_read_SPI0_IMSK_SET() bfin_read32(SPI0_IMSK_SET) +#define bfin_write_SPI0_IMSK_SET(val) bfin_write32(SPI0_IMSK_SET, val) +#define bfin_read_SPI0_STAT() bfin_read32(SPI0_STAT) +#define bfin_write_SPI0_STAT(val) bfin_write32(SPI0_STAT, val) +#define bfin_read_SPI0_ILAT() bfin_read32(SPI0_ILAT) +#define bfin_write_SPI0_ILAT(val) bfin_write32(SPI0_ILAT, val) +#define bfin_read_SPI0_ILAT_CLR() bfin_read32(SPI0_ILAT_CLR) +#define bfin_write_SPI0_ILAT_CLR(val) bfin_write32(SPI0_ILAT_CLR, val) +#define bfin_read_SPI0_RFIFO() bfin_read32(SPI0_RFIFO) +#define bfin_write_SPI0_RFIFO(val) bfin_write32(SPI0_RFIFO, val) +#define bfin_read_SPI0_TFIFO() bfin_read32(SPI0_TFIFO) +#define bfin_write_SPI0_TFIFO(val) bfin_write32(SPI0_TFIFO, val) + +/* SPI1 Registers */ + +#define bfin_read_SPI1_CTL() bfin_read32(SPI1_CTL) +#define bfin_write_SPI1_CTL(val) bfin_write32(SPI1_CTL, val) +#define bfin_read_SPI1_RXCTL() bfin_read32(SPI1_RXCTL) +#define bfin_write_SPI1_RXCTL(val) bfin_write32(SPI1_RXCTL, val) +#define bfin_read_SPI1_TXCTL() bfin_read32(SPI1_TXCTL) +#define bfin_write_SPI1_TXCTL(val) bfin_write32(SPI1_TXCTL, val) +#define bfin_read_SPI1_CLK() bfin_read32(SPI1_CLK) +#define bfin_write_SPI1_CLK(val) bfin_write32(SPI1_CLK, val) +#define bfin_read_SPI1_DLY() bfin_read32(SPI1_DLY) +#define bfin_write_SPI1_DLY(val) bfin_write32(SPI1_DLY, val) +#define bfin_read_SPI1_SLVSEL() bfin_read32(SPI1_SLVSEL) +#define bfin_write_SPI1_SLVSEL(val) bfin_write32(SPI1_SLVSEL, val) +#define bfin_read_SPI1_RWC() bfin_read32(SPI1_RWC) +#define bfin_write_SPI1_RWC(val) bfin_write32(SPI1_RWC, val) +#define bfin_read_SPI1_RWCR() bfin_read32(SPI1_RWCR) +#define bfin_write_SPI1_RWCR(val) bfin_write32(SPI1_RWCR, val) +#define bfin_read_SPI1_TWC() bfin_read32(SPI1_TWC) +#define bfin_write_SPI1_TWC(val) bfin_write32(SPI1_TWC, val) +#define bfin_read_SPI1_TWCR() bfin_read32(SPI1_TWCR) +#define bfin_write_SPI1_TWCR(val) bfin_write32(SPI1_TWCR, val) +#define bfin_read_SPI1_IMSK() bfin_read32(SPI1_IMSK) +#define bfin_write_SPI1_IMSK(val) bfin_write32(SPI1_IMSK, val) +#define bfin_read_SPI1_IMSK_CLR() bfin_read32(SPI1_IMSK_CLR) +#define bfin_write_SPI1_IMSK_CLR(val) bfin_write32(SPI1_IMSK_CLR, val) +#define bfin_read_SPI1_IMSK_SET() bfin_read32(SPI1_IMSK_SET) +#define bfin_write_SPI1_IMSK_SET(val) bfin_write32(SPI1_IMSK_SET, val) +#define bfin_read_SPI1_STAT() bfin_read32(SPI1_STAT) +#define bfin_write_SPI1_STAT(val) bfin_write32(SPI1_STAT, val) +#define bfin_read_SPI1_ILAT() bfin_read32(SPI1_ILAT) +#define bfin_write_SPI1_ILAT(val) bfin_write32(SPI1_ILAT, val) +#define bfin_read_SPI1_ILAT_CLR() bfin_read32(SPI1_ILAT_CLR) +#define bfin_write_SPI1_ILAT_CLR(val) bfin_write32(SPI1_ILAT_CLR, val) +#define bfin_read_SPI1_RFIFO() bfin_read32(SPI1_RFIFO) +#define bfin_write_SPI1_RFIFO(val) bfin_write32(SPI1_RFIFO, val) +#define bfin_read_SPI1_TFIFO() bfin_read32(SPI1_TFIFO) +#define bfin_write_SPI1_TFIFO(val) bfin_write32(SPI1_TFIFO, val) + +/* Timer 0-7 registers */ +#define bfin_read_TIMER0_CONFIG() bfin_read16(TIMER0_CONFIG) +#define bfin_write_TIMER0_CONFIG(val) bfin_write16(TIMER0_CONFIG, val) +#define bfin_read_TIMER0_COUNTER() bfin_read32(TIMER0_COUNTER) +#define bfin_write_TIMER0_COUNTER(val) bfin_write32(TIMER0_COUNTER, val) +#define bfin_read_TIMER0_PERIOD() bfin_read32(TIMER0_PERIOD) +#define bfin_write_TIMER0_PERIOD(val) bfin_write32(TIMER0_PERIOD, val) +#define bfin_read_TIMER0_WIDTH() bfin_read32(TIMER0_WIDTH) +#define bfin_write_TIMER0_WIDTH(val) bfin_write32(TIMER0_WIDTH, val) +#define bfin_read_TIMER1_CONFIG() bfin_read16(TIMER1_CONFIG) +#define bfin_write_TIMER1_CONFIG(val) bfin_write16(TIMER1_CONFIG, val) +#define bfin_read_TIMER1_COUNTER() bfin_read32(TIMER1_COUNTER) +#define bfin_write_TIMER1_COUNTER(val) bfin_write32(TIMER1_COUNTER, val) +#define bfin_read_TIMER1_PERIOD() bfin_read32(TIMER1_PERIOD) +#define bfin_write_TIMER1_PERIOD(val) bfin_write32(TIMER1_PERIOD, val) +#define bfin_read_TIMER1_WIDTH() bfin_read32(TIMER1_WIDTH) +#define bfin_write_TIMER1_WIDTH(val) bfin_write32(TIMER1_WIDTH, val) +#define bfin_read_TIMER2_CONFIG() bfin_read16(TIMER2_CONFIG) +#define bfin_write_TIMER2_CONFIG(val) bfin_write16(TIMER2_CONFIG, val) +#define bfin_read_TIMER2_COUNTER() bfin_read32(TIMER2_COUNTER) +#define bfin_write_TIMER2_COUNTER(val) bfin_write32(TIMER2_COUNTER, val) +#define bfin_read_TIMER2_PERIOD() bfin_read32(TIMER2_PERIOD) +#define bfin_write_TIMER2_PERIOD(val) bfin_write32(TIMER2_PERIOD, val) +#define bfin_read_TIMER2_WIDTH() bfin_read32(TIMER2_WIDTH) +#define bfin_write_TIMER2_WIDTH(val) bfin_write32(TIMER2_WIDTH, val) +#define bfin_read_TIMER3_CONFIG() bfin_read16(TIMER3_CONFIG) +#define bfin_write_TIMER3_CONFIG(val) bfin_write16(TIMER3_CONFIG, val) +#define bfin_read_TIMER3_COUNTER() bfin_read32(TIMER3_COUNTER) +#define bfin_write_TIMER3_COUNTER(val) bfin_write32(TIMER3_COUNTER, val) +#define bfin_read_TIMER3_PERIOD() bfin_read32(TIMER3_PERIOD) +#define bfin_write_TIMER3_PERIOD(val) bfin_write32(TIMER3_PERIOD, val) +#define bfin_read_TIMER3_WIDTH() bfin_read32(TIMER3_WIDTH) +#define bfin_write_TIMER3_WIDTH(val) bfin_write32(TIMER3_WIDTH, val) +#define bfin_read_TIMER4_CONFIG() bfin_read16(TIMER4_CONFIG) +#define bfin_write_TIMER4_CONFIG(val) bfin_write16(TIMER4_CONFIG, val) +#define bfin_read_TIMER4_COUNTER() bfin_read32(TIMER4_COUNTER) +#define bfin_write_TIMER4_COUNTER(val) bfin_write32(TIMER4_COUNTER, val) +#define bfin_read_TIMER4_PERIOD() bfin_read32(TIMER4_PERIOD) +#define bfin_write_TIMER4_PERIOD(val) bfin_write32(TIMER4_PERIOD, val) +#define bfin_read_TIMER4_WIDTH() bfin_read32(TIMER4_WIDTH) +#define bfin_write_TIMER4_WIDTH(val) bfin_write32(TIMER4_WIDTH, val) +#define bfin_read_TIMER5_CONFIG() bfin_read16(TIMER5_CONFIG) +#define bfin_write_TIMER5_CONFIG(val) bfin_write16(TIMER5_CONFIG, val) +#define bfin_read_TIMER5_COUNTER() bfin_read32(TIMER5_COUNTER) +#define bfin_write_TIMER5_COUNTER(val) bfin_write32(TIMER5_COUNTER, val) +#define bfin_read_TIMER5_PERIOD() bfin_read32(TIMER5_PERIOD) +#define bfin_write_TIMER5_PERIOD(val) bfin_write32(TIMER5_PERIOD, val) +#define bfin_read_TIMER5_WIDTH() bfin_read32(TIMER5_WIDTH) +#define bfin_write_TIMER5_WIDTH(val) bfin_write32(TIMER5_WIDTH, val) +#define bfin_read_TIMER6_CONFIG() bfin_read16(TIMER6_CONFIG) +#define bfin_write_TIMER6_CONFIG(val) bfin_write16(TIMER6_CONFIG, val) +#define bfin_read_TIMER6_COUNTER() bfin_read32(TIMER6_COUNTER) +#define bfin_write_TIMER6_COUNTER(val) bfin_write32(TIMER6_COUNTER, val) +#define bfin_read_TIMER6_PERIOD() bfin_read32(TIMER6_PERIOD) +#define bfin_write_TIMER6_PERIOD(val) bfin_write32(TIMER6_PERIOD, val) +#define bfin_read_TIMER6_WIDTH() bfin_read32(TIMER6_WIDTH) +#define bfin_write_TIMER6_WIDTH(val) bfin_write32(TIMER6_WIDTH, val) +#define bfin_read_TIMER7_CONFIG() bfin_read16(TIMER7_CONFIG) +#define bfin_write_TIMER7_CONFIG(val) bfin_write16(TIMER7_CONFIG, val) +#define bfin_read_TIMER7_COUNTER() bfin_read32(TIMER7_COUNTER) +#define bfin_write_TIMER7_COUNTER(val) bfin_write32(TIMER7_COUNTER, val) +#define bfin_read_TIMER7_PERIOD() bfin_read32(TIMER7_PERIOD) +#define bfin_write_TIMER7_PERIOD(val) bfin_write32(TIMER7_PERIOD, val) +#define bfin_read_TIMER7_WIDTH() bfin_read32(TIMER7_WIDTH) +#define bfin_write_TIMER7_WIDTH(val) bfin_write32(TIMER7_WIDTH, val) + + + + +/* Two Wire Interface Registers (TWI0) */ + +/* SPORT1 Registers */ + + +/* SMC Registers */ +#define bfin_read_SMC_GCTL() bfin_read32(SMC_GCTL) +#define bfin_write_SMC_GCTL(val) bfin_write32(SMC_GCTL, val) +#define bfin_read_SMC_GSTAT() bfin_read32(SMC_GSTAT) +#define bfin_read_SMC_B0CTL() bfin_read32(SMC_B0CTL) +#define bfin_write_SMC_B0CTL(val) bfin_write32(SMC_B0CTL, val) +#define bfin_read_SMC_B0TIM() bfin_read32(SMC_B0TIM) +#define bfin_write_SMC_B0TIM(val) bfin_write32(SMC_B0TIM, val) +#define bfin_read_SMC_B0ETIM() bfin_read32(SMC_B0ETIM) +#define bfin_write_SMC_B0ETIM(val) bfin_write32(SMC_B0ETIM, val) +#define bfin_read_SMC_B1CTL() bfin_read32(SMC_B1CTL) +#define bfin_write_SMC_B1CTL(val) bfin_write32(SMC_B1CTL, val) +#define bfin_read_SMC_B1TIM() bfin_read32(SMC_B1TIM) +#define bfin_write_SMC_B1TIM(val) bfin_write32(SMC_B1TIM, val) +#define bfin_read_SMC_B1ETIM() bfin_read32(SMC_B1ETIM) +#define bfin_write_SMC_B1ETIM(val) bfin_write32(SMC_B1ETIM, val) +#define bfin_read_SMC_B2CTL() bfin_read32(SMC_B2CTL) +#define bfin_write_SMC_B2CTL(val) bfin_write32(SMC_B2CTL, val) +#define bfin_read_SMC_B2TIM() bfin_read32(SMC_B2TIM) +#define bfin_write_SMC_B2TIM(val) bfin_write32(SMC_B2TIM, val) +#define bfin_read_SMC_B2ETIM() bfin_read32(SMC_B2ETIM) +#define bfin_write_SMC_B2ETIM(val) bfin_write32(SMC_B2ETIM, val) +#define bfin_read_SMC_B3CTL() bfin_read32(SMC_B3CTL) +#define bfin_write_SMC_B3CTL(val) bfin_write32(SMC_B3CTL, val) +#define bfin_read_SMC_B3TIM() bfin_read32(SMC_B3TIM) +#define bfin_write_SMC_B3TIM(val) bfin_write32(SMC_B3TIM, val) +#define bfin_read_SMC_B3ETIM() bfin_read32(SMC_B3ETIM) +#define bfin_write_SMC_B3ETIM(val) bfin_write32(SMC_B3ETIM, val) + +/* DDR2 Memory Control Registers */ +#define bfin_read_DMC0_CFG() bfin_read32(DMC0_CFG) +#define bfin_write_DMC0_CFG(val) bfin_write32(DMC0_CFG, val) +#define bfin_read_DMC0_TR0() bfin_read32(DMC0_TR0) +#define bfin_write_DMC0_TR0(val) bfin_write32(DMC0_TR0, val) +#define bfin_read_DMC0_TR1() bfin_read32(DMC0_TR1) +#define bfin_write_DMC0_TR1(val) bfin_write32(DMC0_TR1, val) +#define bfin_read_DMC0_TR2() bfin_read32(DMC0_TR2) +#define bfin_write_DMC0_TR2(val) bfin_write32(DMC0_TR2, val) +#define bfin_read_DMC0_MR() bfin_read32(DMC0_MR) +#define bfin_write_DMC0_MR(val) bfin_write32(DMC0_MR, val) +#define bfin_read_DMC0_EMR1() bfin_read32(DMC0_EMR1) +#define bfin_write_DMC0_EMR1(val) bfin_write32(DMC0_EMR1, val) +#define bfin_read_DMC0_CTL() bfin_read32(DMC0_CTL) +#define bfin_write_DMC0_CTL(val) bfin_write32(DMC0_CTL, val) +#define bfin_read_DMC0_EFFCTL() bfin_read32(DMC0_EFFCTL) +#define bfin_write_DMC0_EFFCTL(val) bfin_write32(DMC0_EFFCTL, val) +#define bfin_read_DMC0_STAT() bfin_read32(DMC0_STAT) +#define bfin_write_DMC0_STAT(val) bfin_write32(DMC0_STAT, val) +#define bfin_read_DMC0_DLLCTL() bfin_read32(DMC0_DLLCTL) +#define bfin_write_DMC0_DLLCTL(val) bfin_write32(DMC0_DLLCTL, val) + +/* DDR BankRead and Write Count Registers */ + + +/* DMA Channel 0 Registers */ + +#define bfin_read_DMA0_NEXT_DESC_PTR() bfin_read32(DMA0_NEXT_DESC_PTR) +#define bfin_write_DMA0_NEXT_DESC_PTR(val) bfin_write32(DMA0_NEXT_DESC_PTR, val) +#define bfin_read_DMA0_START_ADDR() bfin_read32(DMA0_START_ADDR) +#define bfin_write_DMA0_START_ADDR(val) bfin_write32(DMA0_START_ADDR, val) +#define bfin_read_DMA0_CONFIG() bfin_read32(DMA0_CONFIG) +#define bfin_write_DMA0_CONFIG(val) bfin_write32(DMA0_CONFIG, val) +#define bfin_read_DMA0_X_COUNT() bfin_read32(DMA0_X_COUNT) +#define bfin_write_DMA0_X_COUNT(val) bfin_write32(DMA0_X_COUNT, val) +#define bfin_read_DMA0_X_MODIFY() bfin_read32(DMA0_X_MODIFY) +#define bfin_write_DMA0_X_MODIFY(val) bfin_write32(DMA0_X_MODIFY, val) +#define bfin_read_DMA0_Y_COUNT() bfin_read32(DMA0_Y_COUNT) +#define bfin_write_DMA0_Y_COUNT(val) bfin_write32(DMA0_Y_COUNT, val) +#define bfin_read_DMA0_Y_MODIFY() bfin_read32(DMA0_Y_MODIFY) +#define bfin_write_DMA0_Y_MODIFY(val) bfin_write32(DMA0_Y_MODIFY, val) +#define bfin_read_DMA0_CURR_DESC_PTR() bfin_read32(DMA0_CURR_DESC_PTR) +#define bfin_write_DMA0_CURR_DESC_PTR(val) bfin_write32(DMA0_CURR_DESC_PTR, val) +#define bfin_read_DMA0_PREV_DESC_PTR() bfin_read32(DMA0_PREV_DESC_PTR) +#define bfin_write_DMA0_PREV_DESC_PTR(val) bfin_write32(DMA0_PREV_DESC_PTR, val) +#define bfin_read_DMA0_CURR_ADDR() bfin_read32(DMA0_CURR_ADDR) +#define bfin_write_DMA0_CURR_ADDR(val) bfin_write32(DMA0_CURR_ADDR, val) +#define bfin_read_DMA0_IRQ_STATUS() bfin_read32(DMA0_IRQ_STATUS) +#define bfin_write_DMA0_IRQ_STATUS(val) bfin_write32(DMA0_IRQ_STATUS, val) +#define bfin_read_DMA0_CURR_X_COUNT() bfin_read32(DMA0_CURR_X_COUNT) +#define bfin_write_DMA0_CURR_X_COUNT(val) bfin_write32(DMA0_CURR_X_COUNT, val) +#define bfin_read_DMA0_CURR_Y_COUNT() bfin_read32(DMA0_CURR_Y_COUNT) +#define bfin_write_DMA0_CURR_Y_COUNT(val) bfin_write32(DMA0_CURR_Y_COUNT, val) +#define bfin_read_DMA0_BWL_COUNT() bfin_read32(DMA0_BWL_COUNT) +#define bfin_write_DMA0_BWL_COUNT(val) bfin_write32(DMA0_BWL_COUNT, val) +#define bfin_read_DMA0_CURR_BWL_COUNT() bfin_read32(DMA0_CURR_BWL_COUNT) +#define bfin_write_DMA0_CURR_BWL_COUNT(val) bfin_write32(DMA0_CURR_BWL_COUNT, val) +#define bfin_read_DMA0_BWM_COUNT() bfin_read32(DMA0_BWM_COUNT) +#define bfin_write_DMA0_BWM_COUNT(val) bfin_write32(DMA0_BWM_COUNT, val) +#define bfin_read_DMA0_CURR_BWM_COUNT() bfin_read32(DMA0_CURR_BWM_COUNT) +#define bfin_write_DMA0_CURR_BWM_COUNT(val) bfin_write32(DMA0_CURR_BWM_COUNT, val) + +/* DMA Channel 1 Registers */ + +#define bfin_read_DMA1_NEXT_DESC_PTR() bfin_read32(DMA1_NEXT_DESC_PTR) +#define bfin_write_DMA1_NEXT_DESC_PTR(val) bfin_write32(DMA1_NEXT_DESC_PTR, val) +#define bfin_read_DMA1_START_ADDR() bfin_read32(DMA1_START_ADDR) +#define bfin_write_DMA1_START_ADDR(val) bfin_write32(DMA1_START_ADDR, val) +#define bfin_read_DMA1_CONFIG() bfin_read32(DMA1_CONFIG) +#define bfin_write_DMA1_CONFIG(val) bfin_write32(DMA1_CONFIG, val) +#define bfin_read_DMA1_X_COUNT() bfin_read32(DMA1_X_COUNT) +#define bfin_write_DMA1_X_COUNT(val) bfin_write32(DMA1_X_COUNT, val) +#define bfin_read_DMA1_X_MODIFY() bfin_read32(DMA1_X_MODIFY) +#define bfin_write_DMA1_X_MODIFY(val) bfin_write32(DMA1_X_MODIFY, val) +#define bfin_read_DMA1_Y_COUNT() bfin_read32(DMA1_Y_COUNT) +#define bfin_write_DMA1_Y_COUNT(val) bfin_write32(DMA1_Y_COUNT, val) +#define bfin_read_DMA1_Y_MODIFY() bfin_read32(DMA1_Y_MODIFY) +#define bfin_write_DMA1_Y_MODIFY(val) bfin_write32(DMA1_Y_MODIFY, val) +#define bfin_read_DMA1_CURR_DESC_PTR() bfin_read32(DMA1_CURR_DESC_PTR) +#define bfin_write_DMA1_CURR_DESC_PTR(val) bfin_write32(DMA1_CURR_DESC_PTR, val) +#define bfin_read_DMA1_PREV_DESC_PTR() bfin_read32(DMA1_PREV_DESC_PTR) +#define bfin_write_DMA1_PREV_DESC_PTR(val) bfin_write32(DMA1_PREV_DESC_PTR, val) +#define bfin_read_DMA1_CURR_ADDR() bfin_read32(DMA1_CURR_ADDR) +#define bfin_write_DMA1_CURR_ADDR(val) bfin_write32(DMA1_CURR_ADDR, val) +#define bfin_read_DMA1_IRQ_STATUS() bfin_read32(DMA1_IRQ_STATUS) +#define bfin_write_DMA1_IRQ_STATUS(val) bfin_write32(DMA1_IRQ_STATUS, val) +#define bfin_read_DMA1_CURR_X_COUNT() bfin_read32(DMA1_CURR_X_COUNT) +#define bfin_write_DMA1_CURR_X_COUNT(val) bfin_write32(DMA1_CURR_X_COUNT, val) +#define bfin_read_DMA1_CURR_Y_COUNT() bfin_read32(DMA1_CURR_Y_COUNT) +#define bfin_write_DMA1_CURR_Y_COUNT(val) bfin_write32(DMA1_CURR_Y_COUNT, val) +#define bfin_read_DMA1_BWL_COUNT() bfin_read32(DMA1_BWL_COUNT) +#define bfin_write_DMA1_BWL_COUNT(val) bfin_write32(DMA1_BWL_COUNT, val) +#define bfin_read_DMA1_CURR_BWL_COUNT() bfin_read32(DMA1_CURR_BWL_COUNT) +#define bfin_write_DMA1_CURR_BWL_COUNT(val) bfin_write32(DMA1_CURR_BWL_COUNT, val) +#define bfin_read_DMA1_BWM_COUNT() bfin_read32(DMA1_BWM_COUNT) +#define bfin_write_DMA1_BWM_COUNT(val) bfin_write32(DMA1_BWM_COUNT, val) +#define bfin_read_DMA1_CURR_BWM_COUNT() bfin_read32(DMA1_CURR_BWM_COUNT) +#define bfin_write_DMA1_CURR_BWM_COUNT(val) bfin_write32(DMA1_CURR_BWM_COUNT, val) + +/* DMA Channel 2 Registers */ + +#define bfin_read_DMA2_NEXT_DESC_PTR() bfin_read32(DMA2_NEXT_DESC_PTR) +#define bfin_write_DMA2_NEXT_DESC_PTR(val) bfin_write32(DMA2_NEXT_DESC_PTR, val) +#define bfin_read_DMA2_START_ADDR() bfin_read32(DMA2_START_ADDR) +#define bfin_write_DMA2_START_ADDR(val) bfin_write32(DMA2_START_ADDR, val) +#define bfin_read_DMA2_CONFIG() bfin_read32(DMA2_CONFIG) +#define bfin_write_DMA2_CONFIG(val) bfin_write32(DMA2_CONFIG, val) +#define bfin_read_DMA2_X_COUNT() bfin_read32(DMA2_X_COUNT) +#define bfin_write_DMA2_X_COUNT(val) bfin_write32(DMA2_X_COUNT, val) +#define bfin_read_DMA2_X_MODIFY() bfin_read32(DMA2_X_MODIFY) +#define bfin_write_DMA2_X_MODIFY(val) bfin_write32(DMA2_X_MODIFY, val) +#define bfin_read_DMA2_Y_COUNT() bfin_read32(DMA2_Y_COUNT) +#define bfin_write_DMA2_Y_COUNT(val) bfin_write32(DMA2_Y_COUNT, val) +#define bfin_read_DMA2_Y_MODIFY() bfin_read32(DMA2_Y_MODIFY) +#define bfin_write_DMA2_Y_MODIFY(val) bfin_write32(DMA2_Y_MODIFY, val) +#define bfin_read_DMA2_CURR_DESC_PTR() bfin_read32(DMA2_CURR_DESC_PTR) +#define bfin_write_DMA2_CURR_DESC_PTR(val) bfin_write32(DMA2_CURR_DESC_PTR, val) +#define bfin_read_DMA2_PREV_DESC_PTR() bfin_read32(DMA2_PREV_DESC_PTR) +#define bfin_write_DMA2_PREV_DESC_PTR(val) bfin_write32(DMA2_PREV_DESC_PTR, val) +#define bfin_read_DMA2_CURR_ADDR() bfin_read32(DMA2_CURR_ADDR) +#define bfin_write_DMA2_CURR_ADDR(val) bfin_write32(DMA2_CURR_ADDR, val) +#define bfin_read_DMA2_IRQ_STATUS() bfin_read32(DMA2_IRQ_STATUS) +#define bfin_write_DMA2_IRQ_STATUS(val) bfin_write32(DMA2_IRQ_STATUS, val) +#define bfin_read_DMA2_CURR_X_COUNT() bfin_read32(DMA2_CURR_X_COUNT) +#define bfin_write_DMA2_CURR_X_COUNT(val) bfin_write32(DMA2_CURR_X_COUNT, val) +#define bfin_read_DMA2_CURR_Y_COUNT() bfin_read32(DMA2_CURR_Y_COUNT) +#define bfin_write_DMA2_CURR_Y_COUNT(val) bfin_write32(DMA2_CURR_Y_COUNT, val) +#define bfin_read_DMA2_BWL_COUNT() bfin_read32(DMA2_BWL_COUNT) +#define bfin_write_DMA2_BWL_COUNT(val) bfin_write32(DMA2_BWL_COUNT, val) +#define bfin_read_DMA2_CURR_BWL_COUNT() bfin_read32(DMA2_CURR_BWL_COUNT) +#define bfin_write_DMA2_CURR_BWL_COUNT(val) bfin_write32(DMA2_CURR_BWL_COUNT, val) +#define bfin_read_DMA2_BWM_COUNT() bfin_read32(DMA2_BWM_COUNT) +#define bfin_write_DMA2_BWM_COUNT(val) bfin_write32(DMA2_BWM_COUNT, val) +#define bfin_read_DMA2_CURR_BWM_COUNT() bfin_read32(DMA2_CURR_BWM_COUNT) +#define bfin_write_DMA2_CURR_BWM_COUNT(val) bfin_write32(DMA2_CURR_BWM_COUNT, val) + +/* DMA Channel 3 Registers */ + +#define bfin_read_DMA3_NEXT_DESC_PTR() bfin_read32(DMA3_NEXT_DESC_PTR) +#define bfin_write_DMA3_NEXT_DESC_PTR(val) bfin_write32(DMA3_NEXT_DESC_PTR, val) +#define bfin_read_DMA3_START_ADDR() bfin_read32(DMA3_START_ADDR) +#define bfin_write_DMA3_START_ADDR(val) bfin_write32(DMA3_START_ADDR, val) +#define bfin_read_DMA3_CONFIG() bfin_read32(DMA3_CONFIG) +#define bfin_write_DMA3_CONFIG(val) bfin_write32(DMA3_CONFIG, val) +#define bfin_read_DMA3_X_COUNT() bfin_read32(DMA3_X_COUNT) +#define bfin_write_DMA3_X_COUNT(val) bfin_write32(DMA3_X_COUNT, val) +#define bfin_read_DMA3_X_MODIFY() bfin_read32(DMA3_X_MODIFY) +#define bfin_write_DMA3_X_MODIFY(val) bfin_write32(DMA3_X_MODIFY, val) +#define bfin_read_DMA3_Y_COUNT() bfin_read32(DMA3_Y_COUNT) +#define bfin_write_DMA3_Y_COUNT(val) bfin_write32(DMA3_Y_COUNT, val) +#define bfin_read_DMA3_Y_MODIFY() bfin_read32(DMA3_Y_MODIFY) +#define bfin_write_DMA3_Y_MODIFY(val) bfin_write32(DMA3_Y_MODIFY, val) +#define bfin_read_DMA3_CURR_DESC_PTR() bfin_read32(DMA3_CURR_DESC_PTR) +#define bfin_write_DMA3_CURR_DESC_PTR(val) bfin_write32(DMA3_CURR_DESC_PTR, val) +#define bfin_read_DMA3_PREV_DESC_PTR() bfin_read32(DMA3_PREV_DESC_PTR) +#define bfin_write_DMA3_PREV_DESC_PTR(val) bfin_write32(DMA3_PREV_DESC_PTR, val) +#define bfin_read_DMA3_CURR_ADDR() bfin_read32(DMA3_CURR_ADDR) +#define bfin_write_DMA3_CURR_ADDR(val) bfin_write32(DMA3_CURR_ADDR, val) +#define bfin_read_DMA3_IRQ_STATUS() bfin_read32(DMA3_IRQ_STATUS) +#define bfin_write_DMA3_IRQ_STATUS(val) bfin_write32(DMA3_IRQ_STATUS, val) +#define bfin_read_DMA3_CURR_X_COUNT() bfin_read32(DMA3_CURR_X_COUNT) +#define bfin_write_DMA3_CURR_X_COUNT(val) bfin_write32(DMA3_CURR_X_COUNT, val) +#define bfin_read_DMA3_CURR_Y_COUNT() bfin_read32(DMA3_CURR_Y_COUNT) +#define bfin_write_DMA3_CURR_Y_COUNT(val) bfin_write32(DMA3_CURR_Y_COUNT, val) +#define bfin_read_DMA3_BWL_COUNT() bfin_read32(DMA3_BWL_COUNT) +#define bfin_write_DMA3_BWL_COUNT(val) bfin_write32(DMA3_BWL_COUNT, val) +#define bfin_read_DMA3_CURR_BWL_COUNT() bfin_read32(DMA3_CURR_BWL_COUNT) +#define bfin_write_DMA3_CURR_BWL_COUNT(val) bfin_write32(DMA3_CURR_BWL_COUNT, val) +#define bfin_read_DMA3_BWM_COUNT() bfin_read32(DMA3_BWM_COUNT) +#define bfin_write_DMA3_BWM_COUNT(val) bfin_write32(DMA3_BWM_COUNT, val) +#define bfin_read_DMA3_CURR_BWM_COUNT() bfin_read32(DMA3_CURR_BWM_COUNT) +#define bfin_write_DMA3_CURR_BWM_COUNT(val) bfin_write32(DMA3_CURR_BWM_COUNT, val) + +/* DMA Channel 4 Registers */ + +#define bfin_read_DMA4_NEXT_DESC_PTR() bfin_read32(DMA4_NEXT_DESC_PTR) +#define bfin_write_DMA4_NEXT_DESC_PTR(val) bfin_write32(DMA4_NEXT_DESC_PTR, val) +#define bfin_read_DMA4_START_ADDR() bfin_read32(DMA4_START_ADDR) +#define bfin_write_DMA4_START_ADDR(val) bfin_write32(DMA4_START_ADDR, val) +#define bfin_read_DMA4_CONFIG() bfin_read32(DMA4_CONFIG) +#define bfin_write_DMA4_CONFIG(val) bfin_write32(DMA4_CONFIG, val) +#define bfin_read_DMA4_X_COUNT() bfin_read32(DMA4_X_COUNT) +#define bfin_write_DMA4_X_COUNT(val) bfin_write32(DMA4_X_COUNT, val) +#define bfin_read_DMA4_X_MODIFY() bfin_read32(DMA4_X_MODIFY) +#define bfin_write_DMA4_X_MODIFY(val) bfin_write32(DMA4_X_MODIFY, val) +#define bfin_read_DMA4_Y_COUNT() bfin_read32(DMA4_Y_COUNT) +#define bfin_write_DMA4_Y_COUNT(val) bfin_write32(DMA4_Y_COUNT, val) +#define bfin_read_DMA4_Y_MODIFY() bfin_read32(DMA4_Y_MODIFY) +#define bfin_write_DMA4_Y_MODIFY(val) bfin_write32(DMA4_Y_MODIFY, val) +#define bfin_read_DMA4_CURR_DESC_PTR() bfin_read32(DMA4_CURR_DESC_PTR) +#define bfin_write_DMA4_CURR_DESC_PTR(val) bfin_write32(DMA4_CURR_DESC_PTR, val) +#define bfin_read_DMA4_PREV_DESC_PTR() bfin_read32(DMA4_PREV_DESC_PTR) +#define bfin_write_DMA4_PREV_DESC_PTR(val) bfin_write32(DMA4_PREV_DESC_PTR, val) +#define bfin_read_DMA4_CURR_ADDR() bfin_read32(DMA4_CURR_ADDR) +#define bfin_write_DMA4_CURR_ADDR(val) bfin_write32(DMA4_CURR_ADDR, val) +#define bfin_read_DMA4_IRQ_STATUS() bfin_read32(DMA4_IRQ_STATUS) +#define bfin_write_DMA4_IRQ_STATUS(val) bfin_write32(DMA4_IRQ_STATUS, val) +#define bfin_read_DMA4_CURR_X_COUNT() bfin_read32(DMA4_CURR_X_COUNT) +#define bfin_write_DMA4_CURR_X_COUNT(val) bfin_write32(DMA4_CURR_X_COUNT, val) +#define bfin_read_DMA4_CURR_Y_COUNT() bfin_read32(DMA4_CURR_Y_COUNT) +#define bfin_write_DMA4_CURR_Y_COUNT(val) bfin_write32(DMA4_CURR_Y_COUNT, val) +#define bfin_read_DMA4_BWL_COUNT() bfin_read32(DMA4_BWL_COUNT) +#define bfin_write_DMA4_BWL_COUNT(val) bfin_write32(DMA4_BWL_COUNT, val) +#define bfin_read_DMA4_CURR_BWL_COUNT() bfin_read32(DMA4_CURR_BWL_COUNT) +#define bfin_write_DMA4_CURR_BWL_COUNT(val) bfin_write32(DMA4_CURR_BWL_COUNT, val) +#define bfin_read_DMA4_BWM_COUNT() bfin_read32(DMA4_BWM_COUNT) +#define bfin_write_DMA4_BWM_COUNT(val) bfin_write32(DMA4_BWM_COUNT, val) +#define bfin_read_DMA4_CURR_BWM_COUNT() bfin_read32(DMA4_CURR_BWM_COUNT) +#define bfin_write_DMA4_CURR_BWM_COUNT(val) bfin_write32(DMA4_CURR_BWM_COUNT, val) + +/* DMA Channel 5 Registers */ + +#define bfin_read_DMA5_NEXT_DESC_PTR() bfin_read32(DMA5_NEXT_DESC_PTR) +#define bfin_write_DMA5_NEXT_DESC_PTR(val) bfin_write32(DMA5_NEXT_DESC_PTR, val) +#define bfin_read_DMA5_START_ADDR() bfin_read32(DMA5_START_ADDR) +#define bfin_write_DMA5_START_ADDR(val) bfin_write32(DMA5_START_ADDR, val) +#define bfin_read_DMA5_CONFIG() bfin_read32(DMA5_CONFIG) +#define bfin_write_DMA5_CONFIG(val) bfin_write32(DMA5_CONFIG, val) +#define bfin_read_DMA5_X_COUNT() bfin_read32(DMA5_X_COUNT) +#define bfin_write_DMA5_X_COUNT(val) bfin_write32(DMA5_X_COUNT, val) +#define bfin_read_DMA5_X_MODIFY() bfin_read32(DMA5_X_MODIFY) +#define bfin_write_DMA5_X_MODIFY(val) bfin_write32(DMA5_X_MODIFY, val) +#define bfin_read_DMA5_Y_COUNT() bfin_read32(DMA5_Y_COUNT) +#define bfin_write_DMA5_Y_COUNT(val) bfin_write32(DMA5_Y_COUNT, val) +#define bfin_read_DMA5_Y_MODIFY() bfin_read32(DMA5_Y_MODIFY) +#define bfin_write_DMA5_Y_MODIFY(val) bfin_write32(DMA5_Y_MODIFY, val) +#define bfin_read_DMA5_CURR_DESC_PTR() bfin_read32(DMA5_CURR_DESC_PTR) +#define bfin_write_DMA5_CURR_DESC_PTR(val) bfin_write32(DMA5_CURR_DESC_PTR, val) +#define bfin_read_DMA5_PREV_DESC_PTR() bfin_read32(DMA5_PREV_DESC_PTR) +#define bfin_write_DMA5_PREV_DESC_PTR(val) bfin_write32(DMA5_PREV_DESC_PTR, val) +#define bfin_read_DMA5_CURR_ADDR() bfin_read32(DMA5_CURR_ADDR) +#define bfin_write_DMA5_CURR_ADDR(val) bfin_write32(DMA5_CURR_ADDR, val) +#define bfin_read_DMA5_IRQ_STATUS() bfin_read32(DMA5_IRQ_STATUS) +#define bfin_write_DMA5_IRQ_STATUS(val) bfin_write32(DMA5_IRQ_STATUS, val) +#define bfin_read_DMA5_CURR_X_COUNT() bfin_read32(DMA5_CURR_X_COUNT) +#define bfin_write_DMA5_CURR_X_COUNT(val) bfin_write32(DMA5_CURR_X_COUNT, val) +#define bfin_read_DMA5_CURR_Y_COUNT() bfin_read32(DMA5_CURR_Y_COUNT) +#define bfin_write_DMA5_CURR_Y_COUNT(val) bfin_write32(DMA5_CURR_Y_COUNT, val) +#define bfin_read_DMA5_BWL_COUNT() bfin_read32(DMA5_BWL_COUNT) +#define bfin_write_DMA5_BWL_COUNT(val) bfin_write32(DMA5_BWL_COUNT, val) +#define bfin_read_DMA5_CURR_BWL_COUNT() bfin_read32(DMA5_CURR_BWL_COUNT) +#define bfin_write_DMA5_CURR_BWL_COUNT(val) bfin_write32(DMA5_CURR_BWL_COUNT, val) +#define bfin_read_DMA5_BWM_COUNT() bfin_read32(DMA5_BWM_COUNT) +#define bfin_write_DMA5_BWM_COUNT(val) bfin_write32(DMA5_BWM_COUNT, val) +#define bfin_read_DMA5_CURR_BWM_COUNT() bfin_read32(DMA5_CURR_BWM_COUNT) +#define bfin_write_DMA5_CURR_BWM_COUNT(val) bfin_write32(DMA5_CURR_BWM_COUNT, val) + +/* DMA Channel 6 Registers */ + +#define bfin_read_DMA6_NEXT_DESC_PTR() bfin_read32(DMA6_NEXT_DESC_PTR) +#define bfin_write_DMA6_NEXT_DESC_PTR(val) bfin_write32(DMA6_NEXT_DESC_PTR, val) +#define bfin_read_DMA6_START_ADDR() bfin_read32(DMA6_START_ADDR) +#define bfin_write_DMA6_START_ADDR(val) bfin_write32(DMA6_START_ADDR, val) +#define bfin_read_DMA6_CONFIG() bfin_read32(DMA6_CONFIG) +#define bfin_write_DMA6_CONFIG(val) bfin_write32(DMA6_CONFIG, val) +#define bfin_read_DMA6_X_COUNT() bfin_read32(DMA6_X_COUNT) +#define bfin_write_DMA6_X_COUNT(val) bfin_write32(DMA6_X_COUNT, val) +#define bfin_read_DMA6_X_MODIFY() bfin_read32(DMA6_X_MODIFY) +#define bfin_write_DMA6_X_MODIFY(val) bfin_write32(DMA6_X_MODIFY, val) +#define bfin_read_DMA6_Y_COUNT() bfin_read32(DMA6_Y_COUNT) +#define bfin_write_DMA6_Y_COUNT(val) bfin_write32(DMA6_Y_COUNT, val) +#define bfin_read_DMA6_Y_MODIFY() bfin_read32(DMA6_Y_MODIFY) +#define bfin_write_DMA6_Y_MODIFY(val) bfin_write32(DMA6_Y_MODIFY, val) +#define bfin_read_DMA6_CURR_DESC_PTR() bfin_read32(DMA6_CURR_DESC_PTR) +#define bfin_write_DMA6_CURR_DESC_PTR(val) bfin_write32(DMA6_CURR_DESC_PTR, val) +#define bfin_read_DMA6_PREV_DESC_PTR() bfin_read32(DMA6_PREV_DESC_PTR) +#define bfin_write_DMA6_PREV_DESC_PTR(val) bfin_write32(DMA6_PREV_DESC_PTR, val) +#define bfin_read_DMA6_CURR_ADDR() bfin_read32(DMA6_CURR_ADDR) +#define bfin_write_DMA6_CURR_ADDR(val) bfin_write32(DMA6_CURR_ADDR, val) +#define bfin_read_DMA6_IRQ_STATUS() bfin_read32(DMA6_IRQ_STATUS) +#define bfin_write_DMA6_IRQ_STATUS(val) bfin_write32(DMA6_IRQ_STATUS, val) +#define bfin_read_DMA6_CURR_X_COUNT() bfin_read32(DMA6_CURR_X_COUNT) +#define bfin_write_DMA6_CURR_X_COUNT(val) bfin_write32(DMA6_CURR_X_COUNT, val) +#define bfin_read_DMA6_CURR_Y_COUNT() bfin_read32(DMA6_CURR_Y_COUNT) +#define bfin_write_DMA6_CURR_Y_COUNT(val) bfin_write32(DMA6_CURR_Y_COUNT, val) +#define bfin_read_DMA6_BWL_COUNT() bfin_read32(DMA6_BWL_COUNT) +#define bfin_write_DMA6_BWL_COUNT(val) bfin_write32(DMA6_BWL_COUNT, val) +#define bfin_read_DMA6_CURR_BWL_COUNT() bfin_read32(DMA6_CURR_BWL_COUNT) +#define bfin_write_DMA6_CURR_BWL_COUNT(val) bfin_write32(DMA6_CURR_BWL_COUNT, val) +#define bfin_read_DMA6_BWM_COUNT() bfin_read32(DMA6_BWM_COUNT) +#define bfin_write_DMA6_BWM_COUNT(val) bfin_write32(DMA6_BWM_COUNT, val) +#define bfin_read_DMA6_CURR_BWM_COUNT() bfin_read32(DMA6_CURR_BWM_COUNT) +#define bfin_write_DMA6_CURR_BWM_COUNT(val) bfin_write32(DMA6_CURR_BWM_COUNT, val) + +/* DMA Channel 7 Registers */ + +#define bfin_read_DMA7_NEXT_DESC_PTR() bfin_read32(DMA7_NEXT_DESC_PTR) +#define bfin_write_DMA7_NEXT_DESC_PTR(val) bfin_write32(DMA7_NEXT_DESC_PTR, val) +#define bfin_read_DMA7_START_ADDR() bfin_read32(DMA7_START_ADDR) +#define bfin_write_DMA7_START_ADDR(val) bfin_write32(DMA7_START_ADDR, val) +#define bfin_read_DMA7_CONFIG() bfin_read32(DMA7_CONFIG) +#define bfin_write_DMA7_CONFIG(val) bfin_write32(DMA7_CONFIG, val) +#define bfin_read_DMA7_X_COUNT() bfin_read32(DMA7_X_COUNT) +#define bfin_write_DMA7_X_COUNT(val) bfin_write32(DMA7_X_COUNT, val) +#define bfin_read_DMA7_X_MODIFY() bfin_read32(DMA7_X_MODIFY) +#define bfin_write_DMA7_X_MODIFY(val) bfin_write32(DMA7_X_MODIFY, val) +#define bfin_read_DMA7_Y_COUNT() bfin_read32(DMA7_Y_COUNT) +#define bfin_write_DMA7_Y_COUNT(val) bfin_write32(DMA7_Y_COUNT, val) +#define bfin_read_DMA7_Y_MODIFY() bfin_read32(DMA7_Y_MODIFY) +#define bfin_write_DMA7_Y_MODIFY(val) bfin_write32(DMA7_Y_MODIFY, val) +#define bfin_read_DMA7_CURR_DESC_PTR() bfin_read32(DMA7_CURR_DESC_PTR) +#define bfin_write_DMA7_CURR_DESC_PTR(val) bfin_write32(DMA7_CURR_DESC_PTR, val) +#define bfin_read_DMA7_PREV_DESC_PTR() bfin_read32(DMA7_PREV_DESC_PTR) +#define bfin_write_DMA7_PREV_DESC_PTR(val) bfin_write32(DMA7_PREV_DESC_PTR, val) +#define bfin_read_DMA7_CURR_ADDR() bfin_read32(DMA7_CURR_ADDR) +#define bfin_write_DMA7_CURR_ADDR(val) bfin_write32(DMA7_CURR_ADDR, val) +#define bfin_read_DMA7_IRQ_STATUS() bfin_read32(DMA7_IRQ_STATUS) +#define bfin_write_DMA7_IRQ_STATUS(val) bfin_write32(DMA7_IRQ_STATUS, val) +#define bfin_read_DMA7_CURR_X_COUNT() bfin_read32(DMA7_CURR_X_COUNT) +#define bfin_write_DMA7_CURR_X_COUNT(val) bfin_write32(DMA7_CURR_X_COUNT, val) +#define bfin_read_DMA7_CURR_Y_COUNT() bfin_read32(DMA7_CURR_Y_COUNT) +#define bfin_write_DMA7_CURR_Y_COUNT(val) bfin_write32(DMA7_CURR_Y_COUNT, val) +#define bfin_read_DMA7_BWL_COUNT() bfin_read32(DMA7_BWL_COUNT) +#define bfin_write_DMA7_BWL_COUNT(val) bfin_write32(DMA7_BWL_COUNT, val) +#define bfin_read_DMA7_CURR_BWL_COUNT() bfin_read32(DMA7_CURR_BWL_COUNT) +#define bfin_write_DMA7_CURR_BWL_COUNT(val) bfin_write32(DMA7_CURR_BWL_COUNT, val) +#define bfin_read_DMA7_BWM_COUNT() bfin_read32(DMA7_BWM_COUNT) +#define bfin_write_DMA7_BWM_COUNT(val) bfin_write32(DMA7_BWM_COUNT, val) +#define bfin_read_DMA7_CURR_BWM_COUNT() bfin_read32(DMA7_CURR_BWM_COUNT) +#define bfin_write_DMA7_CURR_BWM_COUNT(val) bfin_write32(DMA7_CURR_BWM_COUNT, val) + +/* DMA Channel 8 Registers */ + +#define bfin_read_DMA8_NEXT_DESC_PTR() bfin_read32(DMA8_NEXT_DESC_PTR) +#define bfin_write_DMA8_NEXT_DESC_PTR(val) bfin_write32(DMA8_NEXT_DESC_PTR, val) +#define bfin_read_DMA8_START_ADDR() bfin_read32(DMA8_START_ADDR) +#define bfin_write_DMA8_START_ADDR(val) bfin_write32(DMA8_START_ADDR, val) +#define bfin_read_DMA8_CONFIG() bfin_read32(DMA8_CONFIG) +#define bfin_write_DMA8_CONFIG(val) bfin_write32(DMA8_CONFIG, val) +#define bfin_read_DMA8_X_COUNT() bfin_read32(DMA8_X_COUNT) +#define bfin_write_DMA8_X_COUNT(val) bfin_write32(DMA8_X_COUNT, val) +#define bfin_read_DMA8_X_MODIFY() bfin_read32(DMA8_X_MODIFY) +#define bfin_write_DMA8_X_MODIFY(val) bfin_write32(DMA8_X_MODIFY, val) +#define bfin_read_DMA8_Y_COUNT() bfin_read32(DMA8_Y_COUNT) +#define bfin_write_DMA8_Y_COUNT(val) bfin_write32(DMA8_Y_COUNT, val) +#define bfin_read_DMA8_Y_MODIFY() bfin_read32(DMA8_Y_MODIFY) +#define bfin_write_DMA8_Y_MODIFY(val) bfin_write32(DMA8_Y_MODIFY, val) +#define bfin_read_DMA8_CURR_DESC_PTR() bfin_read32(DMA8_CURR_DESC_PTR) +#define bfin_write_DMA8_CURR_DESC_PTR(val) bfin_write32(DMA8_CURR_DESC_PTR, val) +#define bfin_read_DMA8_PREV_DESC_PTR() bfin_read32(DMA8_PREV_DESC_PTR) +#define bfin_write_DMA8_PREV_DESC_PTR(val) bfin_write32(DMA8_PREV_DESC_PTR, val) +#define bfin_read_DMA8_CURR_ADDR() bfin_read32(DMA8_CURR_ADDR) +#define bfin_write_DMA8_CURR_ADDR(val) bfin_write32(DMA8_CURR_ADDR, val) +#define bfin_read_DMA8_IRQ_STATUS() bfin_read32(DMA8_IRQ_STATUS) +#define bfin_write_DMA8_IRQ_STATUS(val) bfin_write32(DMA8_IRQ_STATUS, val) +#define bfin_read_DMA8_CURR_X_COUNT() bfin_read32(DMA8_CURR_X_COUNT) +#define bfin_write_DMA8_CURR_X_COUNT(val) bfin_write32(DMA8_CURR_X_COUNT, val) +#define bfin_read_DMA8_CURR_Y_COUNT() bfin_read32(DMA8_CURR_Y_COUNT) +#define bfin_write_DMA8_CURR_Y_COUNT(val) bfin_write32(DMA8_CURR_Y_COUNT, val) +#define bfin_read_DMA8_BWL_COUNT() bfin_read32(DMA8_BWL_COUNT) +#define bfin_write_DMA8_BWL_COUNT(val) bfin_write32(DMA8_BWL_COUNT, val) +#define bfin_read_DMA8_CURR_BWL_COUNT() bfin_read32(DMA8_CURR_BWL_COUNT) +#define bfin_write_DMA8_CURR_BWL_COUNT(val) bfin_write32(DMA8_CURR_BWL_COUNT, val) +#define bfin_read_DMA8_BWM_COUNT() bfin_read32(DMA8_BWM_COUNT) +#define bfin_write_DMA8_BWM_COUNT(val) bfin_write32(DMA8_BWM_COUNT, val) +#define bfin_read_DMA8_CURR_BWM_COUNT() bfin_read32(DMA8_CURR_BWM_COUNT) +#define bfin_write_DMA8_CURR_BWM_COUNT(val) bfin_write32(DMA8_CURR_BWM_COUNT, val) + +/* DMA Channel 9 Registers */ + +#define bfin_read_DMA9_NEXT_DESC_PTR() bfin_read32(DMA9_NEXT_DESC_PTR) +#define bfin_write_DMA9_NEXT_DESC_PTR(val) bfin_write32(DMA9_NEXT_DESC_PTR, val) +#define bfin_read_DMA9_START_ADDR() bfin_read32(DMA9_START_ADDR) +#define bfin_write_DMA9_START_ADDR(val) bfin_write32(DMA9_START_ADDR, val) +#define bfin_read_DMA9_CONFIG() bfin_read32(DMA9_CONFIG) +#define bfin_write_DMA9_CONFIG(val) bfin_write32(DMA9_CONFIG, val) +#define bfin_read_DMA9_X_COUNT() bfin_read32(DMA9_X_COUNT) +#define bfin_write_DMA9_X_COUNT(val) bfin_write32(DMA9_X_COUNT, val) +#define bfin_read_DMA9_X_MODIFY() bfin_read32(DMA9_X_MODIFY) +#define bfin_write_DMA9_X_MODIFY(val) bfin_write32(DMA9_X_MODIFY, val) +#define bfin_read_DMA9_Y_COUNT() bfin_read32(DMA9_Y_COUNT) +#define bfin_write_DMA9_Y_COUNT(val) bfin_write32(DMA9_Y_COUNT, val) +#define bfin_read_DMA9_Y_MODIFY() bfin_read32(DMA9_Y_MODIFY) +#define bfin_write_DMA9_Y_MODIFY(val) bfin_write32(DMA9_Y_MODIFY, val) +#define bfin_read_DMA9_CURR_DESC_PTR() bfin_read32(DMA9_CURR_DESC_PTR) +#define bfin_write_DMA9_CURR_DESC_PTR(val) bfin_write32(DMA9_CURR_DESC_PTR, val) +#define bfin_read_DMA9_PREV_DESC_PTR() bfin_read32(DMA9_PREV_DESC_PTR) +#define bfin_write_DMA9_PREV_DESC_PTR(val) bfin_write32(DMA9_PREV_DESC_PTR, val) +#define bfin_read_DMA9_CURR_ADDR() bfin_read32(DMA9_CURR_ADDR) +#define bfin_write_DMA9_CURR_ADDR(val) bfin_write32(DMA9_CURR_ADDR, val) +#define bfin_read_DMA9_IRQ_STATUS() bfin_read32(DMA9_IRQ_STATUS) +#define bfin_write_DMA9_IRQ_STATUS(val) bfin_write32(DMA9_IRQ_STATUS, val) +#define bfin_read_DMA9_CURR_X_COUNT() bfin_read32(DMA9_CURR_X_COUNT) +#define bfin_write_DMA9_CURR_X_COUNT(val) bfin_write32(DMA9_CURR_X_COUNT, val) +#define bfin_read_DMA9_CURR_Y_COUNT() bfin_read32(DMA9_CURR_Y_COUNT) +#define bfin_write_DMA9_CURR_Y_COUNT(val) bfin_write32(DMA9_CURR_Y_COUNT, val) +#define bfin_read_DMA9_BWL_COUNT() bfin_read32(DMA9_BWL_COUNT) +#define bfin_write_DMA9_BWL_COUNT(val) bfin_write32(DMA9_BWL_COUNT, val) +#define bfin_read_DMA9_CURR_BWL_COUNT() bfin_read32(DMA9_CURR_BWL_COUNT) +#define bfin_write_DMA9_CURR_BWL_COUNT(val) bfin_write32(DMA9_CURR_BWL_COUNT, val) +#define bfin_read_DMA9_BWM_COUNT() bfin_read32(DMA9_BWM_COUNT) +#define bfin_write_DMA9_BWM_COUNT(val) bfin_write32(DMA9_BWM_COUNT, val) +#define bfin_read_DMA9_CURR_BWM_COUNT() bfin_read32(DMA9_CURR_BWM_COUNT) +#define bfin_write_DMA9_CURR_BWM_COUNT(val) bfin_write32(DMA9_CURR_BWM_COUNT, val) + +/* DMA Channel 10 Registers */ + +#define bfin_read_DMA10_NEXT_DESC_PTR() bfin_read32(DMA10_NEXT_DESC_PTR) +#define bfin_write_DMA10_NEXT_DESC_PTR(val) bfin_write32(DMA10_NEXT_DESC_PTR, val) +#define bfin_read_DMA10_START_ADDR() bfin_read32(DMA10_START_ADDR) +#define bfin_write_DMA10_START_ADDR(val) bfin_write32(DMA10_START_ADDR, val) +#define bfin_read_DMA10_CONFIG() bfin_read32(DMA10_CONFIG) +#define bfin_write_DMA10_CONFIG(val) bfin_write32(DMA10_CONFIG, val) +#define bfin_read_DMA10_X_COUNT() bfin_read32(DMA10_X_COUNT) +#define bfin_write_DMA10_X_COUNT(val) bfin_write32(DMA10_X_COUNT, val) +#define bfin_read_DMA10_X_MODIFY() bfin_read32(DMA10_X_MODIFY) +#define bfin_write_DMA10_X_MODIFY(val) bfin_write32(DMA10_X_MODIFY, val) +#define bfin_read_DMA10_Y_COUNT() bfin_read32(DMA10_Y_COUNT) +#define bfin_write_DMA10_Y_COUNT(val) bfin_write32(DMA10_Y_COUNT, val) +#define bfin_read_DMA10_Y_MODIFY() bfin_read32(DMA10_Y_MODIFY) +#define bfin_write_DMA10_Y_MODIFY(val) bfin_write32(DMA10_Y_MODIFY, val) +#define bfin_read_DMA10_CURR_DESC_PTR() bfin_read32(DMA10_CURR_DESC_PTR) +#define bfin_write_DMA10_CURR_DESC_PTR(val) bfin_write32(DMA10_CURR_DESC_PTR, val) +#define bfin_read_DMA10_PREV_DESC_PTR() bfin_read32(DMA10_PREV_DESC_PTR) +#define bfin_write_DMA10_PREV_DESC_PTR(val) bfin_write32(DMA10_PREV_DESC_PTR, val) +#define bfin_read_DMA10_CURR_ADDR() bfin_read32(DMA10_CURR_ADDR) +#define bfin_write_DMA10_CURR_ADDR(val) bfin_write32(DMA10_CURR_ADDR, val) +#define bfin_read_DMA10_IRQ_STATUS() bfin_read32(DMA10_IRQ_STATUS) +#define bfin_write_DMA10_IRQ_STATUS(val) bfin_write32(DMA10_IRQ_STATUS, val) +#define bfin_read_DMA10_CURR_X_COUNT() bfin_read32(DMA10_CURR_X_COUNT) +#define bfin_write_DMA10_CURR_X_COUNT(val) bfin_write32(DMA10_CURR_X_COUNT, val) +#define bfin_read_DMA10_CURR_Y_COUNT() bfin_read32(DMA10_CURR_Y_COUNT) +#define bfin_write_DMA10_CURR_Y_COUNT(val) bfin_write32(DMA10_CURR_Y_COUNT, val) +#define bfin_read_DMA10_BWL_COUNT() bfin_read32(DMA10_BWL_COUNT) +#define bfin_write_DMA10_BWL_COUNT(val) bfin_write32(DMA10_BWL_COUNT, val) +#define bfin_read_DMA10_CURR_BWL_COUNT() bfin_read32(DMA10_CURR_BWL_COUNT) +#define bfin_write_DMA10_CURR_BWL_COUNT(val) bfin_write32(DMA10_CURR_BWL_COUNT, val) +#define bfin_read_DMA10_BWM_COUNT() bfin_read32(DMA10_BWM_COUNT) +#define bfin_write_DMA10_BWM_COUNT(val) bfin_write32(DMA10_BWM_COUNT, val) +#define bfin_read_DMA10_CURR_BWM_COUNT() bfin_read32(DMA10_CURR_BWM_COUNT) +#define bfin_write_DMA10_CURR_BWM_COUNT(val) bfin_write32(DMA10_CURR_BWM_COUNT, val) + +/* DMA Channel 11 Registers */ + +#define bfin_read_DMA11_NEXT_DESC_PTR() bfin_read32(DMA11_NEXT_DESC_PTR) +#define bfin_write_DMA11_NEXT_DESC_PTR(val) bfin_write32(DMA11_NEXT_DESC_PTR, val) +#define bfin_read_DMA11_START_ADDR() bfin_read32(DMA11_START_ADDR) +#define bfin_write_DMA11_START_ADDR(val) bfin_write32(DMA11_START_ADDR, val) +#define bfin_read_DMA11_CONFIG() bfin_read32(DMA11_CONFIG) +#define bfin_write_DMA11_CONFIG(val) bfin_write32(DMA11_CONFIG, val) +#define bfin_read_DMA11_X_COUNT() bfin_read32(DMA11_X_COUNT) +#define bfin_write_DMA11_X_COUNT(val) bfin_write32(DMA11_X_COUNT, val) +#define bfin_read_DMA11_X_MODIFY() bfin_read32(DMA11_X_MODIFY) +#define bfin_write_DMA11_X_MODIFY(val) bfin_write32(DMA11_X_MODIFY, val) +#define bfin_read_DMA11_Y_COUNT() bfin_read32(DMA11_Y_COUNT) +#define bfin_write_DMA11_Y_COUNT(val) bfin_write32(DMA11_Y_COUNT, val) +#define bfin_read_DMA11_Y_MODIFY() bfin_read32(DMA11_Y_MODIFY) +#define bfin_write_DMA11_Y_MODIFY(val) bfin_write32(DMA11_Y_MODIFY, val) +#define bfin_read_DMA11_CURR_DESC_PTR() bfin_read32(DMA11_CURR_DESC_PTR) +#define bfin_write_DMA11_CURR_DESC_PTR(val) bfin_write32(DMA11_CURR_DESC_PTR, val) +#define bfin_read_DMA11_PREV_DESC_PTR() bfin_read32(DMA11_PREV_DESC_PTR) +#define bfin_write_DMA11_PREV_DESC_PTR(val) bfin_write32(DMA11_PREV_DESC_PTR, val) +#define bfin_read_DMA11_CURR_ADDR() bfin_read32(DMA11_CURR_ADDR) +#define bfin_write_DMA11_CURR_ADDR(val) bfin_write32(DMA11_CURR_ADDR, val) +#define bfin_read_DMA11_IRQ_STATUS() bfin_read32(DMA11_IRQ_STATUS) +#define bfin_write_DMA11_IRQ_STATUS(val) bfin_write32(DMA11_IRQ_STATUS, val) +#define bfin_read_DMA11_CURR_X_COUNT() bfin_read32(DMA11_CURR_X_COUNT) +#define bfin_write_DMA11_CURR_X_COUNT(val) bfin_write32(DMA11_CURR_X_COUNT, val) +#define bfin_read_DMA11_CURR_Y_COUNT() bfin_read32(DMA11_CURR_Y_COUNT) +#define bfin_write_DMA11_CURR_Y_COUNT(val) bfin_write32(DMA11_CURR_Y_COUNT, val) +#define bfin_read_DMA11_BWL_COUNT() bfin_read32(DMA11_BWL_COUNT) +#define bfin_write_DMA11_BWL_COUNT(val) bfin_write32(DMA11_BWL_COUNT, val) +#define bfin_read_DMA11_CURR_BWL_COUNT() bfin_read32(DMA11_CURR_BWL_COUNT) +#define bfin_write_DMA11_CURR_BWL_COUNT(val) bfin_write32(DMA11_CURR_BWL_COUNT, val) +#define bfin_read_DMA11_BWM_COUNT() bfin_read32(DMA11_BWM_COUNT) +#define bfin_write_DMA11_BWM_COUNT(val) bfin_write32(DMA11_BWM_COUNT, val) +#define bfin_read_DMA11_CURR_BWM_COUNT() bfin_read32(DMA11_CURR_BWM_COUNT) +#define bfin_write_DMA11_CURR_BWM_COUNT(val) bfin_write32(DMA11_CURR_BWM_COUNT, val) + +/* DMA Channel 12 Registers */ + +#define bfin_read_DMA12_NEXT_DESC_PTR() bfin_read32(DMA12_NEXT_DESC_PTR) +#define bfin_write_DMA12_NEXT_DESC_PTR(val) bfin_write32(DMA12_NEXT_DESC_PTR, val) +#define bfin_read_DMA12_START_ADDR() bfin_read32(DMA12_START_ADDR) +#define bfin_write_DMA12_START_ADDR(val) bfin_write32(DMA12_START_ADDR, val) +#define bfin_read_DMA12_CONFIG() bfin_read32(DMA12_CONFIG) +#define bfin_write_DMA12_CONFIG(val) bfin_write32(DMA12_CONFIG, val) +#define bfin_read_DMA12_X_COUNT() bfin_read32(DMA12_X_COUNT) +#define bfin_write_DMA12_X_COUNT(val) bfin_write32(DMA12_X_COUNT, val) +#define bfin_read_DMA12_X_MODIFY() bfin_read32(DMA12_X_MODIFY) +#define bfin_write_DMA12_X_MODIFY(val) bfin_write32(DMA12_X_MODIFY, val) +#define bfin_read_DMA12_Y_COUNT() bfin_read32(DMA12_Y_COUNT) +#define bfin_write_DMA12_Y_COUNT(val) bfin_write32(DMA12_Y_COUNT, val) +#define bfin_read_DMA12_Y_MODIFY() bfin_read32(DMA12_Y_MODIFY) +#define bfin_write_DMA12_Y_MODIFY(val) bfin_write32(DMA12_Y_MODIFY, val) +#define bfin_read_DMA12_CURR_DESC_PTR() bfin_read32(DMA12_CURR_DESC_PTR) +#define bfin_write_DMA12_CURR_DESC_PTR(val) bfin_write32(DMA12_CURR_DESC_PTR, val) +#define bfin_read_DMA12_PREV_DESC_PTR() bfin_read32(DMA12_PREV_DESC_PTR) +#define bfin_write_DMA12_PREV_DESC_PTR(val) bfin_write32(DMA12_PREV_DESC_PTR, val) +#define bfin_read_DMA12_CURR_ADDR() bfin_read32(DMA12_CURR_ADDR) +#define bfin_write_DMA12_CURR_ADDR(val) bfin_write32(DMA12_CURR_ADDR, val) +#define bfin_read_DMA12_IRQ_STATUS() bfin_read32(DMA12_IRQ_STATUS) +#define bfin_write_DMA12_IRQ_STATUS(val) bfin_write32(DMA12_IRQ_STATUS, val) +#define bfin_read_DMA12_CURR_X_COUNT() bfin_read32(DMA12_CURR_X_COUNT) +#define bfin_write_DMA12_CURR_X_COUNT(val) bfin_write32(DMA12_CURR_X_COUNT, val) +#define bfin_read_DMA12_CURR_Y_COUNT() bfin_read32(DMA12_CURR_Y_COUNT) +#define bfin_write_DMA12_CURR_Y_COUNT(val) bfin_write32(DMA12_CURR_Y_COUNT, val) +#define bfin_read_DMA12_BWL_COUNT() bfin_read32(DMA12_BWL_COUNT) +#define bfin_write_DMA12_BWL_COUNT(val) bfin_write32(DMA12_BWL_COUNT, val) +#define bfin_read_DMA12_CURR_BWL_COUNT() bfin_read32(DMA12_CURR_BWL_COUNT) +#define bfin_write_DMA12_CURR_BWL_COUNT(val) bfin_write32(DMA12_CURR_BWL_COUNT, val) +#define bfin_read_DMA12_BWM_COUNT() bfin_read32(DMA12_BWM_COUNT) +#define bfin_write_DMA12_BWM_COUNT(val) bfin_write32(DMA12_BWM_COUNT, val) +#define bfin_read_DMA12_CURR_BWM_COUNT() bfin_read32(DMA12_CURR_BWM_COUNT) +#define bfin_write_DMA12_CURR_BWM_COUNT(val) bfin_write32(DMA12_CURR_BWM_COUNT, val) + +/* DMA Channel 13 Registers */ + +#define bfin_read_DMA13_NEXT_DESC_PTR() bfin_read32(DMA13_NEXT_DESC_PTR) +#define bfin_write_DMA13_NEXT_DESC_PTR(val) bfin_write32(DMA13_NEXT_DESC_PTR, val) +#define bfin_read_DMA13_START_ADDR() bfin_read32(DMA13_START_ADDR) +#define bfin_write_DMA13_START_ADDR(val) bfin_write32(DMA13_START_ADDR, val) +#define bfin_read_DMA13_CONFIG() bfin_read32(DMA13_CONFIG) +#define bfin_write_DMA13_CONFIG(val) bfin_write32(DMA13_CONFIG, val) +#define bfin_read_DMA13_X_COUNT() bfin_read32(DMA13_X_COUNT) +#define bfin_write_DMA13_X_COUNT(val) bfin_write32(DMA13_X_COUNT, val) +#define bfin_read_DMA13_X_MODIFY() bfin_read32(DMA13_X_MODIFY) +#define bfin_write_DMA13_X_MODIFY(val) bfin_write32(DMA13_X_MODIFY, val) +#define bfin_read_DMA13_Y_COUNT() bfin_read32(DMA13_Y_COUNT) +#define bfin_write_DMA13_Y_COUNT(val) bfin_write32(DMA13_Y_COUNT, val) +#define bfin_read_DMA13_Y_MODIFY() bfin_read32(DMA13_Y_MODIFY) +#define bfin_write_DMA13_Y_MODIFY(val) bfin_write32(DMA13_Y_MODIFY, val) +#define bfin_read_DMA13_CURR_DESC_PTR() bfin_read32(DMA13_CURR_DESC_PTR) +#define bfin_write_DMA13_CURR_DESC_PTR(val) bfin_write32(DMA13_CURR_DESC_PTR, val) +#define bfin_read_DMA13_PREV_DESC_PTR() bfin_read32(DMA13_PREV_DESC_PTR) +#define bfin_write_DMA13_PREV_DESC_PTR(val) bfin_write32(DMA13_PREV_DESC_PTR, val) +#define bfin_read_DMA13_CURR_ADDR() bfin_read32(DMA13_CURR_ADDR) +#define bfin_write_DMA13_CURR_ADDR(val) bfin_write32(DMA13_CURR_ADDR, val) +#define bfin_read_DMA13_IRQ_STATUS() bfin_read32(DMA13_IRQ_STATUS) +#define bfin_write_DMA13_IRQ_STATUS(val) bfin_write32(DMA13_IRQ_STATUS, val) +#define bfin_read_DMA13_CURR_X_COUNT() bfin_read32(DMA13_CURR_X_COUNT) +#define bfin_write_DMA13_CURR_X_COUNT(val) bfin_write32(DMA13_CURR_X_COUNT, val) +#define bfin_read_DMA13_CURR_Y_COUNT() bfin_read32(DMA13_CURR_Y_COUNT) +#define bfin_write_DMA13_CURR_Y_COUNT(val) bfin_write32(DMA13_CURR_Y_COUNT, val) +#define bfin_read_DMA13_BWL_COUNT() bfin_read32(DMA13_BWL_COUNT) +#define bfin_write_DMA13_BWL_COUNT(val) bfin_write32(DMA13_BWL_COUNT, val) +#define bfin_read_DMA13_CURR_BWL_COUNT() bfin_read32(DMA13_CURR_BWL_COUNT) +#define bfin_write_DMA13_CURR_BWL_COUNT(val) bfin_write32(DMA13_CURR_BWL_COUNT, val) +#define bfin_read_DMA13_BWM_COUNT() bfin_read32(DMA13_BWM_COUNT) +#define bfin_write_DMA13_BWM_COUNT(val) bfin_write32(DMA13_BWM_COUNT, val) +#define bfin_read_DMA13_CURR_BWM_COUNT() bfin_read32(DMA13_CURR_BWM_COUNT) +#define bfin_write_DMA13_CURR_BWM_COUNT(val) bfin_write32(DMA13_CURR_BWM_COUNT, val) + +/* DMA Channel 14 Registers */ + +#define bfin_read_DMA14_NEXT_DESC_PTR() bfin_read32(DMA14_NEXT_DESC_PTR) +#define bfin_write_DMA14_NEXT_DESC_PTR(val) bfin_write32(DMA14_NEXT_DESC_PTR, val) +#define bfin_read_DMA14_START_ADDR() bfin_read32(DMA14_START_ADDR) +#define bfin_write_DMA14_START_ADDR(val) bfin_write32(DMA14_START_ADDR, val) +#define bfin_read_DMA14_CONFIG() bfin_read32(DMA14_CONFIG) +#define bfin_write_DMA14_CONFIG(val) bfin_write32(DMA14_CONFIG, val) +#define bfin_read_DMA14_X_COUNT() bfin_read32(DMA14_X_COUNT) +#define bfin_write_DMA14_X_COUNT(val) bfin_write32(DMA14_X_COUNT, val) +#define bfin_read_DMA14_X_MODIFY() bfin_read32(DMA14_X_MODIFY) +#define bfin_write_DMA14_X_MODIFY(val) bfin_write32(DMA14_X_MODIFY, val) +#define bfin_read_DMA14_Y_COUNT() bfin_read32(DMA14_Y_COUNT) +#define bfin_write_DMA14_Y_COUNT(val) bfin_write32(DMA14_Y_COUNT, val) +#define bfin_read_DMA14_Y_MODIFY() bfin_read32(DMA14_Y_MODIFY) +#define bfin_write_DMA14_Y_MODIFY(val) bfin_write32(DMA14_Y_MODIFY, val) +#define bfin_read_DMA14_CURR_DESC_PTR() bfin_read32(DMA14_CURR_DESC_PTR) +#define bfin_write_DMA14_CURR_DESC_PTR(val) bfin_write32(DMA14_CURR_DESC_PTR, val) +#define bfin_read_DMA14_PREV_DESC_PTR() bfin_read32(DMA14_PREV_DESC_PTR) +#define bfin_write_DMA14_PREV_DESC_PTR(val) bfin_write32(DMA14_PREV_DESC_PTR, val) +#define bfin_read_DMA14_CURR_ADDR() bfin_read32(DMA14_CURR_ADDR) +#define bfin_write_DMA14_CURR_ADDR(val) bfin_write32(DMA14_CURR_ADDR, val) +#define bfin_read_DMA14_IRQ_STATUS() bfin_read32(DMA14_IRQ_STATUS) +#define bfin_write_DMA14_IRQ_STATUS(val) bfin_write32(DMA14_IRQ_STATUS, val) +#define bfin_read_DMA14_CURR_X_COUNT() bfin_read32(DMA14_CURR_X_COUNT) +#define bfin_write_DMA14_CURR_X_COUNT(val) bfin_write32(DMA14_CURR_X_COUNT, val) +#define bfin_read_DMA14_CURR_Y_COUNT() bfin_read32(DMA14_CURR_Y_COUNT) +#define bfin_write_DMA14_CURR_Y_COUNT(val) bfin_write32(DMA14_CURR_Y_COUNT, val) +#define bfin_read_DMA14_BWL_COUNT() bfin_read32(DMA14_BWL_COUNT) +#define bfin_write_DMA14_BWL_COUNT(val) bfin_write32(DMA14_BWL_COUNT, val) +#define bfin_read_DMA14_CURR_BWL_COUNT() bfin_read32(DMA14_CURR_BWL_COUNT) +#define bfin_write_DMA14_CURR_BWL_COUNT(val) bfin_write32(DMA14_CURR_BWL_COUNT, val) +#define bfin_read_DMA14_BWM_COUNT() bfin_read32(DMA14_BWM_COUNT) +#define bfin_write_DMA14_BWM_COUNT(val) bfin_write32(DMA14_BWM_COUNT, val) +#define bfin_read_DMA14_CURR_BWM_COUNT() bfin_read32(DMA14_CURR_BWM_COUNT) +#define bfin_write_DMA14_CURR_BWM_COUNT(val) bfin_write32(DMA14_CURR_BWM_COUNT, val) + +/* DMA Channel 15 Registers */ + +#define bfin_read_DMA15_NEXT_DESC_PTR() bfin_read32(DMA15_NEXT_DESC_PTR) +#define bfin_write_DMA15_NEXT_DESC_PTR(val) bfin_write32(DMA15_NEXT_DESC_PTR, val) +#define bfin_read_DMA15_START_ADDR() bfin_read32(DMA15_START_ADDR) +#define bfin_write_DMA15_START_ADDR(val) bfin_write32(DMA15_START_ADDR, val) +#define bfin_read_DMA15_CONFIG() bfin_read32(DMA15_CONFIG) +#define bfin_write_DMA15_CONFIG(val) bfin_write32(DMA15_CONFIG, val) +#define bfin_read_DMA15_X_COUNT() bfin_read32(DMA15_X_COUNT) +#define bfin_write_DMA15_X_COUNT(val) bfin_write32(DMA15_X_COUNT, val) +#define bfin_read_DMA15_X_MODIFY() bfin_read32(DMA15_X_MODIFY) +#define bfin_write_DMA15_X_MODIFY(val) bfin_write32(DMA15_X_MODIFY, val) +#define bfin_read_DMA15_Y_COUNT() bfin_read32(DMA15_Y_COUNT) +#define bfin_write_DMA15_Y_COUNT(val) bfin_write32(DMA15_Y_COUNT, val) +#define bfin_read_DMA15_Y_MODIFY() bfin_read32(DMA15_Y_MODIFY) +#define bfin_write_DMA15_Y_MODIFY(val) bfin_write32(DMA15_Y_MODIFY, val) +#define bfin_read_DMA15_CURR_DESC_PTR() bfin_read32(DMA15_CURR_DESC_PTR) +#define bfin_write_DMA15_CURR_DESC_PTR(val) bfin_write32(DMA15_CURR_DESC_PTR, val) +#define bfin_read_DMA15_PREV_DESC_PTR() bfin_read32(DMA15_PREV_DESC_PTR) +#define bfin_write_DMA15_PREV_DESC_PTR(val) bfin_write32(DMA15_PREV_DESC_PTR, val) +#define bfin_read_DMA15_CURR_ADDR() bfin_read32(DMA15_CURR_ADDR) +#define bfin_write_DMA15_CURR_ADDR(val) bfin_write32(DMA15_CURR_ADDR, val) +#define bfin_read_DMA15_IRQ_STATUS() bfin_read32(DMA15_IRQ_STATUS) +#define bfin_write_DMA15_IRQ_STATUS(val) bfin_write32(DMA15_IRQ_STATUS, val) +#define bfin_read_DMA15_CURR_X_COUNT() bfin_read32(DMA15_CURR_X_COUNT) +#define bfin_write_DMA15_CURR_X_COUNT(val) bfin_write32(DMA15_CURR_X_COUNT, val) +#define bfin_read_DMA15_CURR_Y_COUNT() bfin_read32(DMA15_CURR_Y_COUNT) +#define bfin_write_DMA15_CURR_Y_COUNT(val) bfin_write32(DMA15_CURR_Y_COUNT, val) +#define bfin_read_DMA15_BWL_COUNT() bfin_read32(DMA15_BWL_COUNT) +#define bfin_write_DMA15_BWL_COUNT(val) bfin_write32(DMA15_BWL_COUNT, val) +#define bfin_read_DMA15_CURR_BWL_COUNT() bfin_read32(DMA15_CURR_BWL_COUNT) +#define bfin_write_DMA15_CURR_BWL_COUNT(val) bfin_write32(DMA15_CURR_BWL_COUNT, val) +#define bfin_read_DMA15_BWM_COUNT() bfin_read32(DMA15_BWM_COUNT) +#define bfin_write_DMA15_BWM_COUNT(val) bfin_write32(DMA15_BWM_COUNT, val) +#define bfin_read_DMA15_CURR_BWM_COUNT() bfin_read32(DMA15_CURR_BWM_COUNT) +#define bfin_write_DMA15_CURR_BWM_COUNT(val) bfin_write32(DMA15_CURR_BWM_COUNT, val) + +/* DMA Channel 16 Registers */ + +#define bfin_read_DMA16_NEXT_DESC_PTR() bfin_read32(DMA16_NEXT_DESC_PTR) +#define bfin_write_DMA16_NEXT_DESC_PTR(val) bfin_write32(DMA16_NEXT_DESC_PTR, val) +#define bfin_read_DMA16_START_ADDR() bfin_read32(DMA16_START_ADDR) +#define bfin_write_DMA16_START_ADDR(val) bfin_write32(DMA16_START_ADDR, val) +#define bfin_read_DMA16_CONFIG() bfin_read32(DMA16_CONFIG) +#define bfin_write_DMA16_CONFIG(val) bfin_write32(DMA16_CONFIG, val) +#define bfin_read_DMA16_X_COUNT() bfin_read32(DMA16_X_COUNT) +#define bfin_write_DMA16_X_COUNT(val) bfin_write32(DMA16_X_COUNT, val) +#define bfin_read_DMA16_X_MODIFY() bfin_read32(DMA16_X_MODIFY) +#define bfin_write_DMA16_X_MODIFY(val) bfin_write32(DMA16_X_MODIFY, val) +#define bfin_read_DMA16_Y_COUNT() bfin_read32(DMA16_Y_COUNT) +#define bfin_write_DMA16_Y_COUNT(val) bfin_write32(DMA16_Y_COUNT, val) +#define bfin_read_DMA16_Y_MODIFY() bfin_read32(DMA16_Y_MODIFY) +#define bfin_write_DMA16_Y_MODIFY(val) bfin_write32(DMA16_Y_MODIFY, val) +#define bfin_read_DMA16_CURR_DESC_PTR() bfin_read32(DMA16_CURR_DESC_PTR) +#define bfin_write_DMA16_CURR_DESC_PTR(val) bfin_write32(DMA16_CURR_DESC_PTR, val) +#define bfin_read_DMA16_PREV_DESC_PTR() bfin_read32(DMA16_PREV_DESC_PTR) +#define bfin_write_DMA16_PREV_DESC_PTR(val) bfin_write32(DMA16_PREV_DESC_PTR, val) +#define bfin_read_DMA16_CURR_ADDR() bfin_read32(DMA16_CURR_ADDR) +#define bfin_write_DMA16_CURR_ADDR(val) bfin_write32(DMA16_CURR_ADDR, val) +#define bfin_read_DMA16_IRQ_STATUS() bfin_read32(DMA16_IRQ_STATUS) +#define bfin_write_DMA16_IRQ_STATUS(val) bfin_write32(DMA16_IRQ_STATUS, val) +#define bfin_read_DMA16_CURR_X_COUNT() bfin_read32(DMA16_CURR_X_COUNT) +#define bfin_write_DMA16_CURR_X_COUNT(val) bfin_write32(DMA16_CURR_X_COUNT, val) +#define bfin_read_DMA16_CURR_Y_COUNT() bfin_read32(DMA16_CURR_Y_COUNT) +#define bfin_write_DMA16_CURR_Y_COUNT(val) bfin_write32(DMA16_CURR_Y_COUNT, val) +#define bfin_read_DMA16_BWL_COUNT() bfin_read32(DMA16_BWL_COUNT) +#define bfin_write_DMA16_BWL_COUNT(val) bfin_write32(DMA16_BWL_COUNT, val) +#define bfin_read_DMA16_CURR_BWL_COUNT() bfin_read32(DMA16_CURR_BWL_COUNT) +#define bfin_write_DMA16_CURR_BWL_COUNT(val) bfin_write32(DMA16_CURR_BWL_COUNT, val) +#define bfin_read_DMA16_BWM_COUNT() bfin_read32(DMA16_BWM_COUNT) +#define bfin_write_DMA16_BWM_COUNT(val) bfin_write32(DMA16_BWM_COUNT, val) +#define bfin_read_DMA16_CURR_BWM_COUNT() bfin_read32(DMA16_CURR_BWM_COUNT) +#define bfin_write_DMA16_CURR_BWM_COUNT(val) bfin_write32(DMA16_CURR_BWM_COUNT, val) + +/* DMA Channel 17 Registers */ + +#define bfin_read_DMA17_NEXT_DESC_PTR() bfin_read32(DMA17_NEXT_DESC_PTR) +#define bfin_write_DMA17_NEXT_DESC_PTR(val) bfin_write32(DMA17_NEXT_DESC_PTR, val) +#define bfin_read_DMA17_START_ADDR() bfin_read32(DMA17_START_ADDR) +#define bfin_write_DMA17_START_ADDR(val) bfin_write32(DMA17_START_ADDR, val) +#define bfin_read_DMA17_CONFIG() bfin_read32(DMA17_CONFIG) +#define bfin_write_DMA17_CONFIG(val) bfin_write32(DMA17_CONFIG, val) +#define bfin_read_DMA17_X_COUNT() bfin_read32(DMA17_X_COUNT) +#define bfin_write_DMA17_X_COUNT(val) bfin_write32(DMA17_X_COUNT, val) +#define bfin_read_DMA17_X_MODIFY() bfin_read32(DMA17_X_MODIFY) +#define bfin_write_DMA17_X_MODIFY(val) bfin_write32(DMA17_X_MODIFY, val) +#define bfin_read_DMA17_Y_COUNT() bfin_read32(DMA17_Y_COUNT) +#define bfin_write_DMA17_Y_COUNT(val) bfin_write32(DMA17_Y_COUNT, val) +#define bfin_read_DMA17_Y_MODIFY() bfin_read32(DMA17_Y_MODIFY) +#define bfin_write_DMA17_Y_MODIFY(val) bfin_write32(DMA17_Y_MODIFY, val) +#define bfin_read_DMA17_CURR_DESC_PTR() bfin_read32(DMA17_CURR_DESC_PTR) +#define bfin_write_DMA17_CURR_DESC_PTR(val) bfin_write32(DMA17_CURR_DESC_PTR, val) +#define bfin_read_DMA17_PREV_DESC_PTR() bfin_read32(DMA17_PREV_DESC_PTR) +#define bfin_write_DMA17_PREV_DESC_PTR(val) bfin_write32(DMA17_PREV_DESC_PTR, val) +#define bfin_read_DMA17_CURR_ADDR() bfin_read32(DMA17_CURR_ADDR) +#define bfin_write_DMA17_CURR_ADDR(val) bfin_write32(DMA17_CURR_ADDR, val) +#define bfin_read_DMA17_IRQ_STATUS() bfin_read32(DMA17_IRQ_STATUS) +#define bfin_write_DMA17_IRQ_STATUS(val) bfin_write32(DMA17_IRQ_STATUS, val) +#define bfin_read_DMA17_CURR_X_COUNT() bfin_read32(DMA17_CURR_X_COUNT) +#define bfin_write_DMA17_CURR_X_COUNT(val) bfin_write32(DMA17_CURR_X_COUNT, val) +#define bfin_read_DMA17_CURR_Y_COUNT() bfin_read32(DMA17_CURR_Y_COUNT) +#define bfin_write_DMA17_CURR_Y_COUNT(val) bfin_write32(DMA17_CURR_Y_COUNT, val) +#define bfin_read_DMA17_BWL_COUNT() bfin_read32(DMA17_BWL_COUNT) +#define bfin_write_DMA17_BWL_COUNT(val) bfin_write32(DMA17_BWL_COUNT, val) +#define bfin_read_DMA17_CURR_BWL_COUNT() bfin_read32(DMA17_CURR_BWL_COUNT) +#define bfin_write_DMA17_CURR_BWL_COUNT(val) bfin_write32(DMA17_CURR_BWL_COUNT, val) +#define bfin_read_DMA17_BWM_COUNT() bfin_read32(DMA17_BWM_COUNT) +#define bfin_write_DMA17_BWM_COUNT(val) bfin_write32(DMA17_BWM_COUNT, val) +#define bfin_read_DMA17_CURR_BWM_COUNT() bfin_read32(DMA17_CURR_BWM_COUNT) +#define bfin_write_DMA17_CURR_BWM_COUNT(val) bfin_write32(DMA17_CURR_BWM_COUNT, val) + +/* DMA Channel 18 Registers */ + +#define bfin_read_DMA18_NEXT_DESC_PTR() bfin_read32(DMA18_NEXT_DESC_PTR) +#define bfin_write_DMA18_NEXT_DESC_PTR(val) bfin_write32(DMA18_NEXT_DESC_PTR, val) +#define bfin_read_DMA18_START_ADDR() bfin_read32(DMA18_START_ADDR) +#define bfin_write_DMA18_START_ADDR(val) bfin_write32(DMA18_START_ADDR, val) +#define bfin_read_DMA18_CONFIG() bfin_read32(DMA18_CONFIG) +#define bfin_write_DMA18_CONFIG(val) bfin_write32(DMA18_CONFIG, val) +#define bfin_read_DMA18_X_COUNT() bfin_read32(DMA18_X_COUNT) +#define bfin_write_DMA18_X_COUNT(val) bfin_write32(DMA18_X_COUNT, val) +#define bfin_read_DMA18_X_MODIFY() bfin_read32(DMA18_X_MODIFY) +#define bfin_write_DMA18_X_MODIFY(val) bfin_write32(DMA18_X_MODIFY, val) +#define bfin_read_DMA18_Y_COUNT() bfin_read32(DMA18_Y_COUNT) +#define bfin_write_DMA18_Y_COUNT(val) bfin_write32(DMA18_Y_COUNT, val) +#define bfin_read_DMA18_Y_MODIFY() bfin_read32(DMA18_Y_MODIFY) +#define bfin_write_DMA18_Y_MODIFY(val) bfin_write32(DMA18_Y_MODIFY, val) +#define bfin_read_DMA18_CURR_DESC_PTR() bfin_read32(DMA18_CURR_DESC_PTR) +#define bfin_write_DMA18_CURR_DESC_PTR(val) bfin_write32(DMA18_CURR_DESC_PTR, val) +#define bfin_read_DMA18_PREV_DESC_PTR() bfin_read32(DMA18_PREV_DESC_PTR) +#define bfin_write_DMA18_PREV_DESC_PTR(val) bfin_write32(DMA18_PREV_DESC_PTR, val) +#define bfin_read_DMA18_CURR_ADDR() bfin_read32(DMA18_CURR_ADDR) +#define bfin_write_DMA18_CURR_ADDR(val) bfin_write32(DMA18_CURR_ADDR, val) +#define bfin_read_DMA18_IRQ_STATUS() bfin_read32(DMA18_IRQ_STATUS) +#define bfin_write_DMA18_IRQ_STATUS(val) bfin_write32(DMA18_IRQ_STATUS, val) +#define bfin_read_DMA18_CURR_X_COUNT() bfin_read32(DMA18_CURR_X_COUNT) +#define bfin_write_DMA18_CURR_X_COUNT(val) bfin_write32(DMA18_CURR_X_COUNT, val) +#define bfin_read_DMA18_CURR_Y_COUNT() bfin_read32(DMA18_CURR_Y_COUNT) +#define bfin_write_DMA18_CURR_Y_COUNT(val) bfin_write32(DMA18_CURR_Y_COUNT, val) +#define bfin_read_DMA18_BWL_COUNT() bfin_read32(DMA18_BWL_COUNT) +#define bfin_write_DMA18_BWL_COUNT(val) bfin_write32(DMA18_BWL_COUNT, val) +#define bfin_read_DMA18_CURR_BWL_COUNT() bfin_read32(DMA18_CURR_BWL_COUNT) +#define bfin_write_DMA18_CURR_BWL_COUNT(val) bfin_write32(DMA18_CURR_BWL_COUNT, val) +#define bfin_read_DMA18_BWM_COUNT() bfin_read32(DMA18_BWM_COUNT) +#define bfin_write_DMA18_BWM_COUNT(val) bfin_write32(DMA18_BWM_COUNT, val) +#define bfin_read_DMA18_CURR_BWM_COUNT() bfin_read32(DMA18_CURR_BWM_COUNT) +#define bfin_write_DMA18_CURR_BWM_COUNT(val) bfin_write32(DMA18_CURR_BWM_COUNT, val) + +/* DMA Channel 19 Registers */ + +#define bfin_read_DMA19_NEXT_DESC_PTR() bfin_read32(DMA19_NEXT_DESC_PTR) +#define bfin_write_DMA19_NEXT_DESC_PTR(val) bfin_write32(DMA19_NEXT_DESC_PTR, val) +#define bfin_read_DMA19_START_ADDR() bfin_read32(DMA19_START_ADDR) +#define bfin_write_DMA19_START_ADDR(val) bfin_write32(DMA19_START_ADDR, val) +#define bfin_read_DMA19_CONFIG() bfin_read32(DMA19_CONFIG) +#define bfin_write_DMA19_CONFIG(val) bfin_write32(DMA19_CONFIG, val) +#define bfin_read_DMA19_X_COUNT() bfin_read32(DMA19_X_COUNT) +#define bfin_write_DMA19_X_COUNT(val) bfin_write32(DMA19_X_COUNT, val) +#define bfin_read_DMA19_X_MODIFY() bfin_read32(DMA19_X_MODIFY) +#define bfin_write_DMA19_X_MODIFY(val) bfin_write32(DMA19_X_MODIFY, val) +#define bfin_read_DMA19_Y_COUNT() bfin_read32(DMA19_Y_COUNT) +#define bfin_write_DMA19_Y_COUNT(val) bfin_write32(DMA19_Y_COUNT, val) +#define bfin_read_DMA19_Y_MODIFY() bfin_read32(DMA19_Y_MODIFY) +#define bfin_write_DMA19_Y_MODIFY(val) bfin_write32(DMA19_Y_MODIFY, val) +#define bfin_read_DMA19_CURR_DESC_PTR() bfin_read32(DMA19_CURR_DESC_PTR) +#define bfin_write_DMA19_CURR_DESC_PTR(val) bfin_write32(DMA19_CURR_DESC_PTR, val) +#define bfin_read_DMA19_PREV_DESC_PTR() bfin_read32(DMA19_PREV_DESC_PTR) +#define bfin_write_DMA19_PREV_DESC_PTR(val) bfin_write32(DMA19_PREV_DESC_PTR, val) +#define bfin_read_DMA19_CURR_ADDR() bfin_read32(DMA19_CURR_ADDR) +#define bfin_write_DMA19_CURR_ADDR(val) bfin_write32(DMA19_CURR_ADDR, val) +#define bfin_read_DMA19_IRQ_STATUS() bfin_read32(DMA19_IRQ_STATUS) +#define bfin_write_DMA19_IRQ_STATUS(val) bfin_write32(DMA19_IRQ_STATUS, val) +#define bfin_read_DMA19_CURR_X_COUNT() bfin_read32(DMA19_CURR_X_COUNT) +#define bfin_write_DMA19_CURR_X_COUNT(val) bfin_write32(DMA19_CURR_X_COUNT, val) +#define bfin_read_DMA19_CURR_Y_COUNT() bfin_read32(DMA19_CURR_Y_COUNT) +#define bfin_write_DMA19_CURR_Y_COUNT(val) bfin_write32(DMA19_CURR_Y_COUNT, val) +#define bfin_read_DMA19_BWL_COUNT() bfin_read32(DMA19_BWL_COUNT) +#define bfin_write_DMA19_BWL_COUNT(val) bfin_write32(DMA19_BWL_COUNT, val) +#define bfin_read_DMA19_CURR_BWL_COUNT() bfin_read32(DMA19_CURR_BWL_COUNT) +#define bfin_write_DMA19_CURR_BWL_COUNT(val) bfin_write32(DMA19_CURR_BWL_COUNT, val) +#define bfin_read_DMA19_BWM_COUNT() bfin_read32(DMA19_BWM_COUNT) +#define bfin_write_DMA19_BWM_COUNT(val) bfin_write32(DMA19_BWM_COUNT, val) +#define bfin_read_DMA19_CURR_BWM_COUNT() bfin_read32(DMA19_CURR_BWM_COUNT) +#define bfin_write_DMA19_CURR_BWM_COUNT(val) bfin_write32(DMA19_CURR_BWM_COUNT, val) + +/* DMA Channel 20 Registers */ + +#define bfin_read_DMA20_NEXT_DESC_PTR() bfin_read32(DMA20_NEXT_DESC_PTR) +#define bfin_write_DMA20_NEXT_DESC_PTR(val) bfin_write32(DMA20_NEXT_DESC_PTR, val) +#define bfin_read_DMA20_START_ADDR() bfin_read32(DMA20_START_ADDR) +#define bfin_write_DMA20_START_ADDR(val) bfin_write32(DMA20_START_ADDR, val) +#define bfin_read_DMA20_CONFIG() bfin_read32(DMA20_CONFIG) +#define bfin_write_DMA20_CONFIG(val) bfin_write32(DMA20_CONFIG, val) +#define bfin_read_DMA20_X_COUNT() bfin_read32(DMA20_X_COUNT) +#define bfin_write_DMA20_X_COUNT(val) bfin_write32(DMA20_X_COUNT, val) +#define bfin_read_DMA20_X_MODIFY() bfin_read32(DMA20_X_MODIFY) +#define bfin_write_DMA20_X_MODIFY(val) bfin_write32(DMA20_X_MODIFY, val) +#define bfin_read_DMA20_Y_COUNT() bfin_read32(DMA20_Y_COUNT) +#define bfin_write_DMA20_Y_COUNT(val) bfin_write32(DMA20_Y_COUNT, val) +#define bfin_read_DMA20_Y_MODIFY() bfin_read32(DMA20_Y_MODIFY) +#define bfin_write_DMA20_Y_MODIFY(val) bfin_write32(DMA20_Y_MODIFY, val) +#define bfin_read_DMA20_CURR_DESC_PTR() bfin_read32(DMA20_CURR_DESC_PTR) +#define bfin_write_DMA20_CURR_DESC_PTR(val) bfin_write32(DMA20_CURR_DESC_PTR, val) +#define bfin_read_DMA20_PREV_DESC_PTR() bfin_read32(DMA20_PREV_DESC_PTR) +#define bfin_write_DMA20_PREV_DESC_PTR(val) bfin_write32(DMA20_PREV_DESC_PTR, val) +#define bfin_read_DMA20_CURR_ADDR() bfin_read32(DMA20_CURR_ADDR) +#define bfin_write_DMA20_CURR_ADDR(val) bfin_write32(DMA20_CURR_ADDR, val) +#define bfin_read_DMA20_IRQ_STATUS() bfin_read32(DMA20_IRQ_STATUS) +#define bfin_write_DMA20_IRQ_STATUS(val) bfin_write32(DMA20_IRQ_STATUS, val) +#define bfin_read_DMA20_CURR_X_COUNT() bfin_read32(DMA20_CURR_X_COUNT) +#define bfin_write_DMA20_CURR_X_COUNT(val) bfin_write32(DMA20_CURR_X_COUNT, val) +#define bfin_read_DMA20_CURR_Y_COUNT() bfin_read32(DMA20_CURR_Y_COUNT) +#define bfin_write_DMA20_CURR_Y_COUNT(val) bfin_write32(DMA20_CURR_Y_COUNT, val) +#define bfin_read_DMA20_BWL_COUNT() bfin_read32(DMA20_BWL_COUNT) +#define bfin_write_DMA20_BWL_COUNT(val) bfin_write32(DMA20_BWL_COUNT, val) +#define bfin_read_DMA20_CURR_BWL_COUNT() bfin_read32(DMA20_CURR_BWL_COUNT) +#define bfin_write_DMA20_CURR_BWL_COUNT(val) bfin_write32(DMA20_CURR_BWL_COUNT, val) +#define bfin_read_DMA20_BWM_COUNT() bfin_read32(DMA20_BWM_COUNT) +#define bfin_write_DMA20_BWM_COUNT(val) bfin_write32(DMA20_BWM_COUNT, val) +#define bfin_read_DMA20_CURR_BWM_COUNT() bfin_read32(DMA20_CURR_BWM_COUNT) +#define bfin_write_DMA20_CURR_BWM_COUNT(val) bfin_write32(DMA20_CURR_BWM_COUNT, val) + + +/* MDMA Stream 0 Registers (DMA Channel 21 and 22) */ + +#define bfin_read_MDMA0_DEST_CRC0_NEXT_DESC_PTR() bfin_read32(MDMA0_DEST_CRC0_NEXT_DESC_PTR) +#define bfin_write_MDMA0_DEST_CRC0_NEXT_DESC_PTR(val) bfin_write32(MDMA0_DEST_CRC0_NEXT_DESC_PTR, val) +#define bfin_read_MDMA0_DEST_CRC0_START_ADDR() bfin_read32(MDMA0_DEST_CRC0_START_ADDR) +#define bfin_write_MDMA0_DEST_CRC0_START_ADDR(val) bfin_write32(MDMA0_DEST_CRC0_START_ADDR, val) +#define bfin_read_MDMA0_DEST_CRC0_CONFIG() bfin_read32(MDMA0_DEST_CRC0_CONFIG) +#define bfin_write_MDMA0_DEST_CRC0_CONFIG(val) bfin_write32(MDMA0_DEST_CRC0_CONFIG, val) +#define bfin_read_MDMA0_DEST_CRC0_X_COUNT() bfin_read32(MDMA0_DEST_CRC0_X_COUNT) +#define bfin_write_MDMA0_DEST_CRC0_X_COUNT(val) bfin_write32(MDMA0_DEST_CRC0_X_COUNT, val) +#define bfin_read_MDMA0_DEST_CRC0_X_MODIFY() bfin_read32(MDMA0_DEST_CRC0_X_MODIFY) +#define bfin_write_MDMA0_DEST_CRC0_X_MODIFY(val) bfin_write32(MDMA0_DEST_CRC0_X_MODIFY, val) +#define bfin_read_MDMA0_DEST_CRC0_Y_COUNT() bfin_read32(MDMA0_DEST_CRC0_Y_COUNT) +#define bfin_write_MDMA0_DEST_CRC0_Y_COUNT(val) bfin_write32(MDMA0_DEST_CRC0_Y_COUNT, val) +#define bfin_read_MDMA0_DEST_CRC0_Y_MODIFY() bfin_read32(MDMA0_DEST_CRC0_Y_MODIFY) +#define bfin_write_MDMA0_DEST_CRC0_Y_MODIFY(val) bfin_write32(MDMA0_DEST_CRC0_Y_MODIFY, val) +#define bfin_read_MDMA0_DEST_CRC0_CURR_DESC_PTR() bfin_read32(MDMA0_DEST_CRC0_CURR_DESC_PTR) +#define bfin_write_MDMA0_DEST_CRC0_CURR_DESC_PTR(val) bfin_write32(MDMA0_DEST_CRC0_CURR_DESC_PTR, val) +#define bfin_read_MDMA0_DEST_CRC0_PREV_DESC_PTR() bfin_read32(MDMA0_DEST_CRC0_PREV_DESC_PTR) +#define bfin_write_MDMA0_DEST_CRC0_PREV_DESC_PTR(val) bfin_write32(MDMA0_DEST_CRC0_PREV_DESC_PTR, val) +#define bfin_read_MDMA0_DEST_CRC0_CURR_ADDR() bfin_read32(MDMA0_DEST_CRC0_CURR_ADDR) +#define bfin_write_MDMA0_DEST_CRC0_CURR_ADDR(val) bfin_write32(MDMA0_DEST_CRC0_CURR_ADDR, val) +#define bfin_read_MDMA0_DEST_CRC0_IRQ_STATUS() bfin_read32(MDMA0_DEST_CRC0_IRQ_STATUS) +#define bfin_write_MDMA0_DEST_CRC0_IRQ_STATUS(val) bfin_write32(MDMA0_DEST_CRC0_IRQ_STATUS, val) +#define bfin_read_MDMA0_DEST_CRC0_CURR_X_COUNT() bfin_read32(MDMA0_DEST_CRC0_CURR_X_COUNT) +#define bfin_write_MDMA0_DEST_CRC0_CURR_X_COUNT(val) bfin_write32(MDMA0_DEST_CRC0_CURR_X_COUNT, val) +#define bfin_read_MDMA0_DEST_CRC0_CURR_Y_COUNT() bfin_read32(MDMA0_DEST_CRC0_CURR_Y_COUNT) +#define bfin_write_MDMA0_DEST_CRC0_CURR_Y_COUNT(val) bfin_write32(MDMA0_DEST_CRC0_CURR_Y_COUNT, val) +#define bfin_read_MDMA0_SRC_CRC0_NEXT_DESC_PTR() bfin_read32(MDMA0_SRC_CRC0_NEXT_DESC_PTR) +#define bfin_write_MDMA0_SRC_CRC0_NEXT_DESC_PTR(val) bfin_write32(MDMA0_SRC_CRC0_NEXT_DESC_PTR, val) +#define bfin_read_MDMA0_SRC_CRC0_START_ADDR() bfin_read32(MDMA0_SRC_CRC0_START_ADDR) +#define bfin_write_MDMA0_SRC_CRC0_START_ADDR(val) bfin_write32(MDMA0_SRC_CRC0_START_ADDR, val) +#define bfin_read_MDMA0_SRC_CRC0_CONFIG() bfin_read32(MDMA0_SRC_CRC0_CONFIG) +#define bfin_write_MDMA0_SRC_CRC0_CONFIG(val) bfin_write32(MDMA0_SRC_CRC0_CONFIG, val) +#define bfin_read_MDMA0_SRC_CRC0_X_COUNT() bfin_read32(MDMA0_SRC_CRC0_X_COUNT) +#define bfin_write_MDMA0_SRC_CRC0_X_COUNT(val) bfin_write32(MDMA0_SRC_CRC0_X_COUNT, val) +#define bfin_read_MDMA0_SRC_CRC0_X_MODIFY() bfin_read32(MDMA0_SRC_CRC0_X_MODIFY) +#define bfin_write_MDMA0_SRC_CRC0_X_MODIFY(val) bfin_write32(MDMA0_SRC_CRC0_X_MODIFY, val) +#define bfin_read_MDMA0_SRC_CRC0_Y_COUNT() bfin_read32(MDMA0_SRC_CRC0_Y_COUNT) +#define bfin_write_MDMA0_SRC_CRC0_Y_COUNT(val) bfin_write32(MDMA0_SRC_CRC0_Y_COUNT, val) +#define bfin_read_MDMA0_SRC_CRC0_Y_MODIFY() bfin_read32(MDMA0_SRC_CRC0_Y_MODIFY) +#define bfin_write_MDMA0_SRC_CRC0_Y_MODIFY(val) bfin_write32(MDMA0_SRC_CRC0_Y_MODIFY, val) +#define bfin_read_MDMA0_SRC_CRC0_CURR_DESC_PTR() bfin_read32(MDMA0_SRC_CRC0_CURR_DESC_PTR) +#define bfin_write_MDMA0_SRC_CRC0_CURR_DESC_PTR(val) bfin_write32(MDMA0_SRC_CRC0_CURR_DESC_PTR, val) +#define bfin_read_MDMA0_SRC_CRC0_PREV_DESC_PTR() bfin_read32(MDMA0_SRC_CRC0_PREV_DESC_PTR) +#define bfin_write_MDMA0_SRC_CRC0_PREV_DESC_PTR(val) bfin_write32(MDMA0_SRC_CRC0_PREV_DESC_PTR, val) +#define bfin_read_MDMA0_SRC_CRC0_CURR_ADDR() bfin_read32(MDMA0_SRC_CRC0_CURR_ADDR) +#define bfin_write_MDMA0_SRC_CRC0_CURR_ADDR(val) bfin_write32(MDMA0_SRC_CRC0_CURR_ADDR, val) +#define bfin_read_MDMA0_SRC_CRC0_IRQ_STATUS() bfin_read32(MDMA0_SRC_CRC0_IRQ_STATUS) +#define bfin_write_MDMA0_SRC_CRC0_IRQ_STATUS(val) bfin_write32(MDMA0_SRC_CRC0_IRQ_STATUS, val) +#define bfin_read_MDMA0_SRC_CRC0_CURR_X_COUNT() bfin_read32(MDMA0_SRC_CRC0_CURR_X_COUNT) +#define bfin_write_MDMA0_SRC_CRC0_CURR_X_COUNT(val) bfin_write32(MDMA0_SRC_CRC0_CURR_X_COUNT, val) +#define bfin_read_MDMA0_SRC_CRC0_CURR_Y_COUNT() bfin_read32(MDMA0_SRC_CRC0_CURR_Y_COUNT) +#define bfin_write_MDMA0_SRC_CRC0_CURR_Y_COUNT(val) bfin_write32(MDMA0_SRC_CRC0_CURR_Y_COUNT, val) + +/* MDMA Stream 1 Registers (DMA Channel 23 and 24) */ + +#define bfin_read_MDMA1_DEST_CRC1_NEXT_DESC_PTR() bfin_read32(MDMA1_DEST_CRC1_NEXT_DESC_PTR) +#define bfin_write_MDMA1_DEST_CRC1_NEXT_DESC_PTR(val) bfin_write32(MDMA1_DEST_CRC1_NEXT_DESC_PTR, val) +#define bfin_read_MDMA1_DEST_CRC1_START_ADDR() bfin_read32(MDMA1_DEST_CRC1_START_ADDR) +#define bfin_write_MDMA1_DEST_CRC1_START_ADDR(val) bfin_write32(MDMA1_DEST_CRC1_START_ADDR, val) +#define bfin_read_MDMA1_DEST_CRC1_CONFIG() bfin_read32(MDMA1_DEST_CRC1_CONFIG) +#define bfin_write_MDMA1_DEST_CRC1_CONFIG(val) bfin_write32(MDMA1_DEST_CRC1_CONFIG, val) +#define bfin_read_MDMA1_DEST_CRC1_X_COUNT() bfin_read32(MDMA1_DEST_CRC1_X_COUNT) +#define bfin_write_MDMA1_DEST_CRC1_X_COUNT(val) bfin_write32(MDMA1_DEST_CRC1_X_COUNT, val) +#define bfin_read_MDMA1_DEST_CRC1_X_MODIFY() bfin_read32(MDMA1_DEST_CRC1_X_MODIFY) +#define bfin_write_MDMA1_DEST_CRC1_X_MODIFY(val) bfin_write32(MDMA1_DEST_CRC1_X_MODIFY, val) +#define bfin_read_MDMA1_DEST_CRC1_Y_COUNT() bfin_read32(MDMA1_DEST_CRC1_Y_COUNT) +#define bfin_write_MDMA1_DEST_CRC1_Y_COUNT(val) bfin_write32(MDMA1_DEST_CRC1_Y_COUNT, val) +#define bfin_read_MDMA1_DEST_CRC1_Y_MODIFY() bfin_read32(MDMA1_DEST_CRC1_Y_MODIFY) +#define bfin_write_MDMA1_DEST_CRC1_Y_MODIFY(val) bfin_write32(MDMA1_DEST_CRC1_Y_MODIFY, val) +#define bfin_read_MDMA1_DEST_CRC1_CURR_DESC_PTR() bfin_read32(MDMA1_DEST_CRC1_CURR_DESC_PTR) +#define bfin_write_MDMA1_DEST_CRC1_CURR_DESC_PTR(val) bfin_write32(MDMA1_DEST_CRC1_CURR_DESC_PTR, val) +#define bfin_read_MDMA1_DEST_CRC1_PREV_DESC_PTR() bfin_read32(MDMA1_DEST_CRC1_PREV_DESC_PTR) +#define bfin_write_MDMA1_DEST_CRC1_PREV_DESC_PTR(val) bfin_write32(MDMA1_DEST_CRC1_PREV_DESC_PTR, val) +#define bfin_read_MDMA1_DEST_CRC1_CURR_ADDR() bfin_read32(MDMA1_DEST_CRC1_CURR_ADDR) +#define bfin_write_MDMA1_DEST_CRC1_CURR_ADDR(val) bfin_write32(MDMA1_DEST_CRC1_CURR_ADDR, val) +#define bfin_read_MDMA1_DEST_CRC1_IRQ_STATUS() bfin_read32(MDMA1_DEST_CRC1_IRQ_STATUS) +#define bfin_write_MDMA1_DEST_CRC1_IRQ_STATUS(val) bfin_write32(MDMA1_DEST_CRC1_IRQ_STATUS, val) +#define bfin_read_MDMA1_DEST_CRC1_CURR_X_COUNT() bfin_read32(MDMA1_DEST_CRC1_CURR_X_COUNT) +#define bfin_write_MDMA1_DEST_CRC1_CURR_X_COUNT(val) bfin_write32(MDMA1_DEST_CRC1_CURR_X_COUNT, val) +#define bfin_read_MDMA1_DEST_CRC1_CURR_Y_COUNT() bfin_read32(MDMA1_DEST_CRC1_CURR_Y_COUNT) +#define bfin_write_MDMA1_DEST_CRC1_CURR_Y_COUNT(val) bfin_write32(MDMA1_DEST_CRC1_CURR_Y_COUNT, val) +#define bfin_read_MDMA1_SRC_CRC1_NEXT_DESC_PTR() bfin_read32(MDMA1_SRC_CRC1_NEXT_DESC_PTR) +#define bfin_write_MDMA1_SRC_CRC1_NEXT_DESC_PTR(val) bfin_write32(MDMA1_SRC_CRC1_NEXT_DESC_PTR, val) +#define bfin_read_MDMA1_SRC_CRC1_START_ADDR() bfin_read32(MDMA1_SRC_CRC1_START_ADDR) +#define bfin_write_MDMA1_SRC_CRC1_START_ADDR(val) bfin_write32(MDMA1_SRC_CRC1_START_ADDR, val) +#define bfin_read_MDMA1_SRC_CRC1_CONFIG() bfin_read32(MDMA1_SRC_CRC1_CONFIG) +#define bfin_write_MDMA1_SRC_CRC1_CONFIG(val) bfin_write32(MDMA1_SRC_CRC1_CONFIG, val) +#define bfin_read_MDMA1_SRC_CRC1_X_COUNT() bfin_read32(MDMA1_SRC_CRC1_X_COUNT) +#define bfin_write_MDMA1_SRC_CRC1_X_COUNT(val) bfin_write32(MDMA1_SRC_CRC1_X_COUNT, val) +#define bfin_read_MDMA1_SRC_CRC1_X_MODIFY() bfin_read32(MDMA1_SRC_CRC1_X_MODIFY) +#define bfin_write_MDMA1_SRC_CRC1_X_MODIFY(val) bfin_write32(MDMA1_SRC_CRC1_X_MODIFY, val) +#define bfin_read_MDMA1_SRC_CRC1_Y_COUNT() bfin_read32(MDMA1_SRC_CRC1_Y_COUNT) +#define bfin_write_MDMA1_SRC_CRC1_Y_COUNT(val) bfin_write32(MDMA1_SRC_CRC1_Y_COUNT, val) +#define bfin_read_MDMA1_SRC_CRC1_Y_MODIFY() bfin_read32(MDMA1_SRC_CRC1_Y_MODIFY) +#define bfin_write_MDMA1_SRC_CRC1_Y_MODIFY(val) bfin_write32(MDMA1_SRC_CRC1_Y_MODIFY, val) +#define bfin_read_MDMA1_SRC_CRC1_CURR_DESC_PTR() bfin_read32(MDMA1_SRC_CRC1_CURR_DESC_PTR) +#define bfin_write_MDMA1_SRC_CRC1_CURR_DESC_PTR(val) bfin_write32(MDMA1_SRC_CRC1_CURR_DESC_PTR, val) +#define bfin_read_MDMA1_SRC_CRC1_PREV_DESC_PTR() bfin_read32(MDMA1_SRC_CRC1_PREV_DESC_PTR) +#define bfin_write_MDMA1_SRC_CRC1_PREV_DESC_PTR(val) bfin_write32(MDMA1_SRC_CRC1_PREV_DESC_PTR, val) +#define bfin_read_MDMA1_SRC_CRC1_CURR_ADDR() bfin_read32(MDMA1_SRC_CRC1_CURR_ADDR) +#define bfin_write_MDMA1_SRC_CRC1_CURR_ADDR(val) bfin_write32(MDMA1_SRC_CRC1_CURR_ADDR, val) +#define bfin_read_MDMA1_SRC_CRC1_IRQ_STATUS() bfin_read32(MDMA1_SRC_CRC1_IRQ_STATUS) +#define bfin_write_MDMA1_SRC_CRC1_IRQ_STATUS(val) bfin_write32(MDMA1_SRC_CRC1_IRQ_STATUS, val) +#define bfin_read_MDMA1_SRC_CRC1_CURR_X_COUNT() bfin_read32(MDMA1_SRC_CRC1_CURR_X_COUNT) +#define bfin_write_MDMA1_SRC_CRC1_CURR_X_COUNT(val) bfin_write32(MDMA1_SRC_CRC1_CURR_X_COUNT, val) +#define bfin_read_MDMA1_SRC_CRC1_CURR_Y_COUNT() bfin_read32(MDMA1_SRC_CRC1_CURR_Y_COUNT) +#define bfin_write_MDMA1_SRC_CRC1_CURR_Y_COUNT(val) bfin_write32(MDMA1_SRC_CRC1_CURR_Y_COUNT, val) + + +/* MDMA Stream 2 Registers (DMA Channel 25 and 26) */ + +#define bfin_read_MDMA2_DEST_NEXT_DESC_PTR() bfin_read32(MDMA2_DEST_NEXT_DESC_PTR) +#define bfin_write_MDMA2_DEST_NEXT_DESC_PTR(val) bfin_write32(MDMA2_DEST_NEXT_DESC_PTR, val) +#define bfin_read_MDMA2_DEST_START_ADDR() bfin_read32(MDMA2_DEST_START_ADDR) +#define bfin_write_MDMA2_DEST_START_ADDR(val) bfin_write32(MDMA2_DEST_START_ADDR, val) +#define bfin_read_MDMA2_DEST_CONFIG() bfin_read32(MDMA2_DEST_CONFIG) +#define bfin_write_MDMA2_DEST_CONFIG(val) bfin_write32(MDMA2_DEST_CONFIG, val) +#define bfin_read_MDMA2_DEST_X_COUNT() bfin_read32(MDMA2_DEST_X_COUNT) +#define bfin_write_MDMA2_DEST_X_COUNT(val) bfin_write32(MDMA2_DEST_X_COUNT, val) +#define bfin_read_MDMA2_DEST_X_MODIFY() bfin_read32(MDMA2_DEST_X_MODIFY) +#define bfin_write_MDMA2_DEST_X_MODIFY(val) bfin_write32(MDMA2_DEST_X_MODIFY, val) +#define bfin_read_MDMA2_DEST_Y_COUNT() bfin_read32(MDMA2_DEST_Y_COUNT) +#define bfin_write_MDMA2_DEST_Y_COUNT(val) bfin_write32(MDMA2_DEST_Y_COUNT, val) +#define bfin_read_MDMA2_DEST_Y_MODIFY() bfin_read32(MDMA2_DEST_Y_MODIFY) +#define bfin_write_MDMA2_DEST_Y_MODIFY(val) bfin_write32(MDMA2_DEST_Y_MODIFY, val) +#define bfin_read_MDMA2_DEST_CURR_DESC_PTR() bfin_read32(MDMA2_DEST_CURR_DESC_PTR) +#define bfin_write_MDMA2_DEST_CURR_DESC_PTR(val) bfin_write32(MDMA2_DEST_CURR_DESC_PTR, val) +#define bfin_read_MDMA2_DEST_PREV_DESC_PTR() bfin_read32(MDMA2_DEST_PREV_DESC_PTR) +#define bfin_write_MDMA2_DEST_PREV_DESC_PTR(val) bfin_write32(MDMA2_DEST_PREV_DESC_PTR, val) +#define bfin_read_MDMA2_DEST_CURR_ADDR() bfin_read32(MDMA2_DEST_CURR_ADDR) +#define bfin_write_MDMA2_DEST_CURR_ADDR(val) bfin_write32(MDMA2_DEST_CURR_ADDR, val) +#define bfin_read_MDMA2_DEST_IRQ_STATUS() bfin_read32(MDMA2_DEST_IRQ_STATUS) +#define bfin_write_MDMA2_DEST_IRQ_STATUS(val) bfin_write32(MDMA2_DEST_IRQ_STATUS, val) +#define bfin_read_MDMA2_DEST_CURR_X_COUNT() bfin_read32(MDMA2_DEST_CURR_X_COUNT) +#define bfin_write_MDMA2_DEST_CURR_X_COUNT(val) bfin_write32(MDMA2_DEST_CURR_X_COUNT, val) +#define bfin_read_MDMA2_DEST_CURR_Y_COUNT() bfin_read32(MDMA2_DEST_CURR_Y_COUNT) +#define bfin_write_MDMA2_DEST_CURR_Y_COUNT(val) bfin_write32(MDMA2_DEST_CURR_Y_COUNT, val) +#define bfin_read_MDMA2_SRC_NEXT_DESC_PTR() bfin_read32(MDMA2_SRC_NEXT_DESC_PTR) +#define bfin_write_MDMA2_SRC_NEXT_DESC_PTR(val) bfin_write32(MDMA2_SRC_NEXT_DESC_PTR, val) +#define bfin_read_MDMA2_SRC_START_ADDR() bfin_read32(MDMA2_SRC_START_ADDR) +#define bfin_write_MDMA2_SRC_START_ADDR(val) bfin_write32(MDMA2_SRC_START_ADDR, val) +#define bfin_read_MDMA2_SRC_CONFIG() bfin_read32(MDMA2_SRC_CONFIG) +#define bfin_write_MDMA2_SRC_CONFIG(val) bfin_write32(MDMA2_SRC_CONFIG, val) +#define bfin_read_MDMA2_SRC_X_COUNT() bfin_read32(MDMA2_SRC_X_COUNT) +#define bfin_write_MDMA2_SRC_X_COUNT(val) bfin_write32(MDMA2_SRC_X_COUNT, val) +#define bfin_read_MDMA2_SRC_X_MODIFY() bfin_read32(MDMA2_SRC_X_MODIFY) +#define bfin_write_MDMA2_SRC_X_MODIFY(val) bfin_write32(MDMA2_SRC_X_MODIFY, val) +#define bfin_read_MDMA2_SRC_Y_COUNT() bfin_read32(MDMA2_SRC_Y_COUNT) +#define bfin_write_MDMA2_SRC_Y_COUNT(val) bfin_write32(MDMA2_SRC_Y_COUNT, val) +#define bfin_read_MDMA2_SRC_Y_MODIFY() bfin_read32(MDMA2_SRC_Y_MODIFY) +#define bfin_write_MDMA2_SRC_Y_MODIFY(val) bfin_write32(MDMA2_SRC_Y_MODIFY, val) +#define bfin_read_MDMA2_SRC_CURR_DESC_PTR() bfin_read32(MDMA2_SRC_CURR_DESC_PTR) +#define bfin_write_MDMA2_SRC_CURR_DESC_PTR(val) bfin_write32(MDMA2_SRC_CURR_DESC_PTR, val) +#define bfin_read_MDMA2_SRC_PREV_DESC_PTR() bfin_read32(MDMA2_SRC_PREV_DESC_PTR) +#define bfin_write_MDMA2_SRC_PREV_DESC_PTR(val) bfin_write32(MDMA2_SRC_PREV_DESC_PTR, val) +#define bfin_read_MDMA2_SRC_CURR_ADDR() bfin_read32(MDMA2_SRC_CURR_ADDR) +#define bfin_write_MDMA2_SRC_CURR_ADDR(val) bfin_write32(MDMA2_SRC_CURR_ADDR, val) +#define bfin_read_MDMA2_SRC_IRQ_STATUS() bfin_read32(MDMA2_SRC_IRQ_STATUS) +#define bfin_write_MDMA2_SRC_IRQ_STATUS(val) bfin_write32(MDMA2_SRC_IRQ_STATUS, val) +#define bfin_read_MDMA2_SRC_CURR_X_COUNT() bfin_read32(MDMA2_SRC_CURR_X_COUNT) +#define bfin_write_MDMA2_SRC_CURR_X_COUNT(val) bfin_write32(MDMA2_SRC_CURR_X_COUNT, val) +#define bfin_read_MDMA2_SRC_CURR_Y_COUNT() bfin_read32(MDMA2_SRC_CURR_Y_COUNT) +#define bfin_write_MDMA2_SRC_CURR_Y_COUNT(val) bfin_write32(MDMA2_SRC_CURR_Y_COUNT, val) + +/* MDMA Stream 3 Registers (DMA Channel 27 and 28) */ + +#define bfin_read_MDMA3_DEST_NEXT_DESC_PTR() bfin_read32(MDMA3_DEST_NEXT_DESC_PTR) +#define bfin_write_MDMA3_DEST_NEXT_DESC_PTR(val) bfin_write32(MDMA3_DEST_NEXT_DESC_PTR, val) +#define bfin_read_MDMA3_DEST_START_ADDR() bfin_read32(MDMA3_DEST_START_ADDR) +#define bfin_write_MDMA3_DEST_START_ADDR(val) bfin_write32(MDMA3_DEST_START_ADDR, val) +#define bfin_read_MDMA3_DEST_CONFIG() bfin_read32(MDMA3_DEST_CONFIG) +#define bfin_write_MDMA3_DEST_CONFIG(val) bfin_write32(MDMA3_DEST_CONFIG, val) +#define bfin_read_MDMA3_DEST_X_COUNT() bfin_read32(MDMA3_DEST_X_COUNT) +#define bfin_write_MDMA3_DEST_X_COUNT(val) bfin_write32(MDMA3_DEST_X_COUNT, val) +#define bfin_read_MDMA3_DEST_X_MODIFY() bfin_read32(MDMA3_DEST_X_MODIFY) +#define bfin_write_MDMA3_DEST_X_MODIFY(val) bfin_write32(MDMA3_DEST_X_MODIFY, val) +#define bfin_read_MDMA3_DEST_Y_COUNT() bfin_read32(MDMA3_DEST_Y_COUNT) +#define bfin_write_MDMA3_DEST_Y_COUNT(val) bfin_write32(MDMA3_DEST_Y_COUNT, val) +#define bfin_read_MDMA3_DEST_Y_MODIFY() bfin_read32(MDMA3_DEST_Y_MODIFY) +#define bfin_write_MDMA3_DEST_Y_MODIFY(val) bfin_write32(MDMA3_DEST_Y_MODIFY, val) +#define bfin_read_MDMA3_DEST_CURR_DESC_PTR() bfin_read32(MDMA3_DEST_CURR_DESC_PTR) +#define bfin_write_MDMA3_DEST_CURR_DESC_PTR(val) bfin_write32(MDMA3_DEST_CURR_DESC_PTR, val) +#define bfin_read_MDMA3_DEST_PREV_DESC_PTR() bfin_read32(MDMA3_DEST_PREV_DESC_PTR) +#define bfin_write_MDMA3_DEST_PREV_DESC_PTR(val) bfin_write32(MDMA3_DEST_PREV_DESC_PTR, val) +#define bfin_read_MDMA3_DEST_CURR_ADDR() bfin_read32(MDMA3_DEST_CURR_ADDR) +#define bfin_write_MDMA3_DEST_CURR_ADDR(val) bfin_write32(MDMA3_DEST_CURR_ADDR, val) +#define bfin_read_MDMA3_DEST_IRQ_STATUS() bfin_read32(MDMA3_DEST_IRQ_STATUS) +#define bfin_write_MDMA3_DEST_IRQ_STATUS(val) bfin_write32(MDMA3_DEST_IRQ_STATUS, val) +#define bfin_read_MDMA3_DEST_CURR_X_COUNT() bfin_read32(MDMA3_DEST_CURR_X_COUNT) +#define bfin_write_MDMA3_DEST_CURR_X_COUNT(val) bfin_write32(MDMA3_DEST_CURR_X_COUNT, val) +#define bfin_read_MDMA3_DEST_CURR_Y_COUNT() bfin_read32(MDMA3_DEST_CURR_Y_COUNT) +#define bfin_write_MDMA3_DEST_CURR_Y_COUNT(val) bfin_write32(MDMA3_DEST_CURR_Y_COUNT, val) +#define bfin_read_MDMA3_SRC_NEXT_DESC_PTR() bfin_read32(MDMA3_SRC_NEXT_DESC_PTR) +#define bfin_write_MDMA3_SRC_NEXT_DESC_PTR(val) bfin_write32(MDMA3_SRC_NEXT_DESC_PTR, val) +#define bfin_read_MDMA3_SRC_START_ADDR() bfin_read32(MDMA3_SRC_START_ADDR) +#define bfin_write_MDMA3_SRC_START_ADDR(val) bfin_write32(MDMA3_SRC_START_ADDR, val) +#define bfin_read_MDMA3_SRC_CONFIG() bfin_read32(MDMA3_SRC_CONFIG) +#define bfin_write_MDMA3_SRC_CONFIG(val) bfin_write32(MDMA3_SRC_CONFIG, val) +#define bfin_read_MDMA3_SRC_X_COUNT() bfin_read32(MDMA3_SRC_X_COUNT) +#define bfin_write_MDMA3_SRC_X_COUNT(val) bfin_write32(MDMA3_SRC_X_COUNT, val) +#define bfin_read_MDMA3_SRC_X_MODIFY() bfin_read32(MDMA3_SRC_X_MODIFY) +#define bfin_write_MDMA3_SRC_X_MODIFY(val) bfin_write32(MDMA3_SRC_X_MODIFY, val) +#define bfin_read_MDMA3_SRC_Y_COUNT() bfin_read32(MDMA3_SRC_Y_COUNT) +#define bfin_write_MDMA3_SRC_Y_COUNT(val) bfin_write32(MDMA3_SRC_Y_COUNT, val) +#define bfin_read_MDMA3_SRC_Y_MODIFY() bfin_read32(MDMA3_SRC_Y_MODIFY) +#define bfin_write_MDMA3_SRC_Y_MODIFY(val) bfin_write32(MDMA3_SRC_Y_MODIFY, val) +#define bfin_read_MDMA3_SRC_CURR_DESC_PTR() bfin_read32(MDMA3_SRC_CURR_DESC_PTR) +#define bfin_write_MDMA3_SRC_CURR_DESC_PTR(val) bfin_write32(MDMA3_SRC_CURR_DESC_PTR, val) +#define bfin_read_MDMA3_SRC_PREV_DESC_PTR() bfin_read32(MDMA3_SRC_PREV_DESC_PTR) +#define bfin_write_MDMA3_SRC_PREV_DESC_PTR(val) bfin_write32(MDMA3_SRC_PREV_DESC_PTR, val) +#define bfin_read_MDMA3_SRC_CURR_ADDR() bfin_read32(MDMA3_SRC_CURR_ADDR) +#define bfin_write_MDMA3_SRC_CURR_ADDR(val) bfin_write32(MDMA3_SRC_CURR_ADDR, val) +#define bfin_read_MDMA3_SRC_IRQ_STATUS() bfin_read32(MDMA3_SRC_IRQ_STATUS) +#define bfin_write_MDMA3_SRC_IRQ_STATUS(val) bfin_write32(MDMA3_SRC_IRQ_STATUS, val) +#define bfin_read_MDMA3_SRC_CURR_X_COUNT() bfin_read32(MDMA3_SRC_CURR_X_COUNT) +#define bfin_write_MDMA3_SRC_CURR_X_COUNT(val) bfin_write32(MDMA3_SRC_CURR_X_COUNT, val) +#define bfin_read_MDMA3_SRC_CURR_Y_COUNT() bfin_read32(MDMA3_SRC_CURR_Y_COUNT) +#define bfin_write_MDMA3_SRC_CURR_Y_COUNT(val) bfin_write32(MDMA3_SRC_CURR_Y_COUNT, val) + + +/* DMA Channel 29 Registers */ + +#define bfin_read_DMA29_NEXT_DESC_PTR() bfin_read32(DMA29_NEXT_DESC_PTR) +#define bfin_write_DMA29_NEXT_DESC_PTR(val) bfin_write32(DMA29_NEXT_DESC_PTR, val) +#define bfin_read_DMA29_START_ADDR() bfin_read32(DMA29_START_ADDR) +#define bfin_write_DMA29_START_ADDR(val) bfin_write32(DMA29_START_ADDR, val) +#define bfin_read_DMA29_CONFIG() bfin_read32(DMA29_CONFIG) +#define bfin_write_DMA29_CONFIG(val) bfin_write32(DMA29_CONFIG, val) +#define bfin_read_DMA29_X_COUNT() bfin_read32(DMA29_X_COUNT) +#define bfin_write_DMA29_X_COUNT(val) bfin_write32(DMA29_X_COUNT, val) +#define bfin_read_DMA29_X_MODIFY() bfin_read32(DMA29_X_MODIFY) +#define bfin_write_DMA29_X_MODIFY(val) bfin_write32(DMA29_X_MODIFY, val) +#define bfin_read_DMA29_Y_COUNT() bfin_read32(DMA29_Y_COUNT) +#define bfin_write_DMA29_Y_COUNT(val) bfin_write32(DMA29_Y_COUNT, val) +#define bfin_read_DMA29_Y_MODIFY() bfin_read32(DMA29_Y_MODIFY) +#define bfin_write_DMA29_Y_MODIFY(val) bfin_write32(DMA29_Y_MODIFY, val) +#define bfin_read_DMA29_CURR_DESC_PTR() bfin_read32(DMA29_CURR_DESC_PTR) +#define bfin_write_DMA29_CURR_DESC_PTR(val) bfin_write32(DMA29_CURR_DESC_PTR, val) +#define bfin_read_DMA29_PREV_DESC_PTR() bfin_read32(DMA29_PREV_DESC_PTR) +#define bfin_write_DMA29_PREV_DESC_PTR(val) bfin_write32(DMA29_PREV_DESC_PTR, val) +#define bfin_read_DMA29_CURR_ADDR() bfin_read32(DMA29_CURR_ADDR) +#define bfin_write_DMA29_CURR_ADDR(val) bfin_write32(DMA29_CURR_ADDR, val) +#define bfin_read_DMA29_IRQ_STATUS() bfin_read32(DMA29_IRQ_STATUS) +#define bfin_write_DMA29_IRQ_STATUS(val) bfin_write32(DMA29_IRQ_STATUS, val) +#define bfin_read_DMA29_CURR_X_COUNT() bfin_read32(DMA29_CURR_X_COUNT) +#define bfin_write_DMA29_CURR_X_COUNT(val) bfin_write32(DMA29_CURR_X_COUNT, val) +#define bfin_read_DMA29_CURR_Y_COUNT() bfin_read32(DMA29_CURR_Y_COUNT) +#define bfin_write_DMA29_CURR_Y_COUNT(val) bfin_write32(DMA29_CURR_Y_COUNT, val) +#define bfin_read_DMA29_BWL_COUNT() bfin_read32(DMA29_BWL_COUNT) +#define bfin_write_DMA29_BWL_COUNT(val) bfin_write32(DMA29_BWL_COUNT, val) +#define bfin_read_DMA29_CURR_BWL_COUNT() bfin_read32(DMA29_CURR_BWL_COUNT) +#define bfin_write_DMA29_CURR_BWL_COUNT(val) bfin_write32(DMA29_CURR_BWL_COUNT, val) +#define bfin_read_DMA29_BWM_COUNT() bfin_read32(DMA29_BWM_COUNT) +#define bfin_write_DMA29_BWM_COUNT(val) bfin_write32(DMA29_BWM_COUNT, val) +#define bfin_read_DMA29_CURR_BWM_COUNT() bfin_read32(DMA29_CURR_BWM_COUNT) +#define bfin_write_DMA29_CURR_BWM_COUNT(val) bfin_write32(DMA29_CURR_BWM_COUNT, val) + +/* DMA Channel 30 Registers */ + +#define bfin_read_DMA30_NEXT_DESC_PTR() bfin_read32(DMA30_NEXT_DESC_PTR) +#define bfin_write_DMA30_NEXT_DESC_PTR(val) bfin_write32(DMA30_NEXT_DESC_PTR, val) +#define bfin_read_DMA30_START_ADDR() bfin_read32(DMA30_START_ADDR) +#define bfin_write_DMA30_START_ADDR(val) bfin_write32(DMA30_START_ADDR, val) +#define bfin_read_DMA30_CONFIG() bfin_read32(DMA30_CONFIG) +#define bfin_write_DMA30_CONFIG(val) bfin_write32(DMA30_CONFIG, val) +#define bfin_read_DMA30_X_COUNT() bfin_read32(DMA30_X_COUNT) +#define bfin_write_DMA30_X_COUNT(val) bfin_write32(DMA30_X_COUNT, val) +#define bfin_read_DMA30_X_MODIFY() bfin_read32(DMA30_X_MODIFY) +#define bfin_write_DMA30_X_MODIFY(val) bfin_write32(DMA30_X_MODIFY, val) +#define bfin_read_DMA30_Y_COUNT() bfin_read32(DMA30_Y_COUNT) +#define bfin_write_DMA30_Y_COUNT(val) bfin_write32(DMA30_Y_COUNT, val) +#define bfin_read_DMA30_Y_MODIFY() bfin_read32(DMA30_Y_MODIFY) +#define bfin_write_DMA30_Y_MODIFY(val) bfin_write32(DMA30_Y_MODIFY, val) +#define bfin_read_DMA30_CURR_DESC_PTR() bfin_read32(DMA30_CURR_DESC_PTR) +#define bfin_write_DMA30_CURR_DESC_PTR(val) bfin_write32(DMA30_CURR_DESC_PTR, val) +#define bfin_read_DMA30_PREV_DESC_PTR() bfin_read32(DMA30_PREV_DESC_PTR) +#define bfin_write_DMA30_PREV_DESC_PTR(val) bfin_write32(DMA30_PREV_DESC_PTR, val) +#define bfin_read_DMA30_CURR_ADDR() bfin_read32(DMA30_CURR_ADDR) +#define bfin_write_DMA30_CURR_ADDR(val) bfin_write32(DMA30_CURR_ADDR, val) +#define bfin_read_DMA30_IRQ_STATUS() bfin_read32(DMA30_IRQ_STATUS) +#define bfin_write_DMA30_IRQ_STATUS(val) bfin_write32(DMA30_IRQ_STATUS, val) +#define bfin_read_DMA30_CURR_X_COUNT() bfin_read32(DMA30_CURR_X_COUNT) +#define bfin_write_DMA30_CURR_X_COUNT(val) bfin_write32(DMA30_CURR_X_COUNT, val) +#define bfin_read_DMA30_CURR_Y_COUNT() bfin_read32(DMA30_CURR_Y_COUNT) +#define bfin_write_DMA30_CURR_Y_COUNT(val) bfin_write32(DMA30_CURR_Y_COUNT, val) +#define bfin_read_DMA30_BWL_COUNT() bfin_read32(DMA30_BWL_COUNT) +#define bfin_write_DMA30_BWL_COUNT(val) bfin_write32(DMA30_BWL_COUNT, val) +#define bfin_read_DMA30_CURR_BWL_COUNT() bfin_read32(DMA30_CURR_BWL_COUNT) +#define bfin_write_DMA30_CURR_BWL_COUNT(val) bfin_write32(DMA30_CURR_BWL_COUNT, val) +#define bfin_read_DMA30_BWM_COUNT() bfin_read32(DMA30_BWM_COUNT) +#define bfin_write_DMA30_BWM_COUNT(val) bfin_write32(DMA30_BWM_COUNT, val) +#define bfin_read_DMA30_CURR_BWM_COUNT() bfin_read32(DMA30_CURR_BWM_COUNT) +#define bfin_write_DMA30_CURR_BWM_COUNT(val) bfin_write32(DMA30_CURR_BWM_COUNT, val) + +/* DMA Channel 31 Registers */ + +#define bfin_read_DMA31_NEXT_DESC_PTR() bfin_read32(DMA31_NEXT_DESC_PTR) +#define bfin_write_DMA31_NEXT_DESC_PTR(val) bfin_write32(DMA31_NEXT_DESC_PTR, val) +#define bfin_read_DMA31_START_ADDR() bfin_read32(DMA31_START_ADDR) +#define bfin_write_DMA31_START_ADDR(val) bfin_write32(DMA31_START_ADDR, val) +#define bfin_read_DMA31_CONFIG() bfin_read32(DMA31_CONFIG) +#define bfin_write_DMA31_CONFIG(val) bfin_write32(DMA31_CONFIG, val) +#define bfin_read_DMA31_X_COUNT() bfin_read32(DMA31_X_COUNT) +#define bfin_write_DMA31_X_COUNT(val) bfin_write32(DMA31_X_COUNT, val) +#define bfin_read_DMA31_X_MODIFY() bfin_read32(DMA31_X_MODIFY) +#define bfin_write_DMA31_X_MODIFY(val) bfin_write32(DMA31_X_MODIFY, val) +#define bfin_read_DMA31_Y_COUNT() bfin_read32(DMA31_Y_COUNT) +#define bfin_write_DMA31_Y_COUNT(val) bfin_write32(DMA31_Y_COUNT, val) +#define bfin_read_DMA31_Y_MODIFY() bfin_read32(DMA31_Y_MODIFY) +#define bfin_write_DMA31_Y_MODIFY(val) bfin_write32(DMA31_Y_MODIFY, val) +#define bfin_read_DMA31_CURR_DESC_PTR() bfin_read32(DMA31_CURR_DESC_PTR) +#define bfin_write_DMA31_CURR_DESC_PTR(val) bfin_write32(DMA31_CURR_DESC_PTR, val) +#define bfin_read_DMA31_PREV_DESC_PTR() bfin_read32(DMA31_PREV_DESC_PTR) +#define bfin_write_DMA31_PREV_DESC_PTR(val) bfin_write32(DMA31_PREV_DESC_PTR, val) +#define bfin_read_DMA31_CURR_ADDR() bfin_read32(DMA31_CURR_ADDR) +#define bfin_write_DMA31_CURR_ADDR(val) bfin_write32(DMA31_CURR_ADDR, val) +#define bfin_read_DMA31_IRQ_STATUS() bfin_read32(DMA31_IRQ_STATUS) +#define bfin_write_DMA31_IRQ_STATUS(val) bfin_write32(DMA31_IRQ_STATUS, val) +#define bfin_read_DMA31_CURR_X_COUNT() bfin_read32(DMA31_CURR_X_COUNT) +#define bfin_write_DMA31_CURR_X_COUNT(val) bfin_write32(DMA31_CURR_X_COUNT, val) +#define bfin_read_DMA31_CURR_Y_COUNT() bfin_read32(DMA31_CURR_Y_COUNT) +#define bfin_write_DMA31_CURR_Y_COUNT(val) bfin_write32(DMA31_CURR_Y_COUNT, val) +#define bfin_read_DMA31_BWL_COUNT() bfin_read32(DMA31_BWL_COUNT) +#define bfin_write_DMA31_BWL_COUNT(val) bfin_write32(DMA31_BWL_COUNT, val) +#define bfin_read_DMA31_CURR_BWL_COUNT() bfin_read32(DMA31_CURR_BWL_COUNT) +#define bfin_write_DMA31_CURR_BWL_COUNT(val) bfin_write32(DMA31_CURR_BWL_COUNT, val) +#define bfin_read_DMA31_BWM_COUNT() bfin_read32(DMA31_BWM_COUNT) +#define bfin_write_DMA31_BWM_COUNT(val) bfin_write32(DMA31_BWM_COUNT, val) +#define bfin_read_DMA31_CURR_BWM_COUNT() bfin_read32(DMA31_CURR_BWM_COUNT) +#define bfin_write_DMA31_CURR_BWM_COUNT(val) bfin_write32(DMA31_CURR_BWM_COUNT, val) + +/* DMA Channel 32 Registers */ + +#define bfin_read_DMA32_NEXT_DESC_PTR() bfin_read32(DMA32_NEXT_DESC_PTR) +#define bfin_write_DMA32_NEXT_DESC_PTR(val) bfin_write32(DMA32_NEXT_DESC_PTR, val) +#define bfin_read_DMA32_START_ADDR() bfin_read32(DMA32_START_ADDR) +#define bfin_write_DMA32_START_ADDR(val) bfin_write32(DMA32_START_ADDR, val) +#define bfin_read_DMA32_CONFIG() bfin_read32(DMA32_CONFIG) +#define bfin_write_DMA32_CONFIG(val) bfin_write32(DMA32_CONFIG, val) +#define bfin_read_DMA32_X_COUNT() bfin_read32(DMA32_X_COUNT) +#define bfin_write_DMA32_X_COUNT(val) bfin_write32(DMA32_X_COUNT, val) +#define bfin_read_DMA32_X_MODIFY() bfin_read32(DMA32_X_MODIFY) +#define bfin_write_DMA32_X_MODIFY(val) bfin_write32(DMA32_X_MODIFY, val) +#define bfin_read_DMA32_Y_COUNT() bfin_read32(DMA32_Y_COUNT) +#define bfin_write_DMA32_Y_COUNT(val) bfin_write32(DMA32_Y_COUNT, val) +#define bfin_read_DMA32_Y_MODIFY() bfin_read32(DMA32_Y_MODIFY) +#define bfin_write_DMA32_Y_MODIFY(val) bfin_write32(DMA32_Y_MODIFY, val) +#define bfin_read_DMA32_CURR_DESC_PTR() bfin_read32(DMA32_CURR_DESC_PTR) +#define bfin_write_DMA32_CURR_DESC_PTR(val) bfin_write32(DMA32_CURR_DESC_PTR, val) +#define bfin_read_DMA32_PREV_DESC_PTR() bfin_read32(DMA32_PREV_DESC_PTR) +#define bfin_write_DMA32_PREV_DESC_PTR(val) bfin_write32(DMA32_PREV_DESC_PTR, val) +#define bfin_read_DMA32_CURR_ADDR() bfin_read32(DMA32_CURR_ADDR) +#define bfin_write_DMA32_CURR_ADDR(val) bfin_write32(DMA32_CURR_ADDR, val) +#define bfin_read_DMA32_IRQ_STATUS() bfin_read32(DMA32_IRQ_STATUS) +#define bfin_write_DMA32_IRQ_STATUS(val) bfin_write32(DMA32_IRQ_STATUS, val) +#define bfin_read_DMA32_CURR_X_COUNT() bfin_read32(DMA32_CURR_X_COUNT) +#define bfin_write_DMA32_CURR_X_COUNT(val) bfin_write32(DMA32_CURR_X_COUNT, val) +#define bfin_read_DMA32_CURR_Y_COUNT() bfin_read32(DMA32_CURR_Y_COUNT) +#define bfin_write_DMA32_CURR_Y_COUNT(val) bfin_write32(DMA32_CURR_Y_COUNT, val) +#define bfin_read_DMA32_BWL_COUNT() bfin_read32(DMA32_BWL_COUNT) +#define bfin_write_DMA32_BWL_COUNT(val) bfin_write32(DMA32_BWL_COUNT, val) +#define bfin_read_DMA32_CURR_BWL_COUNT() bfin_read32(DMA32_CURR_BWL_COUNT) +#define bfin_write_DMA32_CURR_BWL_COUNT(val) bfin_write32(DMA32_CURR_BWL_COUNT, val) +#define bfin_read_DMA32_BWM_COUNT() bfin_read32(DMA32_BWM_COUNT) +#define bfin_write_DMA32_BWM_COUNT(val) bfin_write32(DMA32_BWM_COUNT, val) +#define bfin_read_DMA32_CURR_BWM_COUNT() bfin_read32(DMA32_CURR_BWM_COUNT) +#define bfin_write_DMA32_CURR_BWM_COUNT(val) bfin_write32(DMA32_CURR_BWM_COUNT, val) + +/* DMA Channel 33 Registers */ + +#define bfin_read_DMA33_NEXT_DESC_PTR() bfin_read32(DMA33_NEXT_DESC_PTR) +#define bfin_write_DMA33_NEXT_DESC_PTR(val) bfin_write32(DMA33_NEXT_DESC_PTR, val) +#define bfin_read_DMA33_START_ADDR() bfin_read32(DMA33_START_ADDR) +#define bfin_write_DMA33_START_ADDR(val) bfin_write32(DMA33_START_ADDR, val) +#define bfin_read_DMA33_CONFIG() bfin_read32(DMA33_CONFIG) +#define bfin_write_DMA33_CONFIG(val) bfin_write32(DMA33_CONFIG, val) +#define bfin_read_DMA33_X_COUNT() bfin_read32(DMA33_X_COUNT) +#define bfin_write_DMA33_X_COUNT(val) bfin_write32(DMA33_X_COUNT, val) +#define bfin_read_DMA33_X_MODIFY() bfin_read32(DMA33_X_MODIFY) +#define bfin_write_DMA33_X_MODIFY(val) bfin_write32(DMA33_X_MODIFY, val) +#define bfin_read_DMA33_Y_COUNT() bfin_read32(DMA33_Y_COUNT) +#define bfin_write_DMA33_Y_COUNT(val) bfin_write32(DMA33_Y_COUNT, val) +#define bfin_read_DMA33_Y_MODIFY() bfin_read32(DMA33_Y_MODIFY) +#define bfin_write_DMA33_Y_MODIFY(val) bfin_write32(DMA33_Y_MODIFY, val) +#define bfin_read_DMA33_CURR_DESC_PTR() bfin_read32(DMA33_CURR_DESC_PTR) +#define bfin_write_DMA33_CURR_DESC_PTR(val) bfin_write32(DMA33_CURR_DESC_PTR, val) +#define bfin_read_DMA33_PREV_DESC_PTR() bfin_read32(DMA33_PREV_DESC_PTR) +#define bfin_write_DMA33_PREV_DESC_PTR(val) bfin_write32(DMA33_PREV_DESC_PTR, val) +#define bfin_read_DMA33_CURR_ADDR() bfin_read32(DMA33_CURR_ADDR) +#define bfin_write_DMA33_CURR_ADDR(val) bfin_write32(DMA33_CURR_ADDR, val) +#define bfin_read_DMA33_IRQ_STATUS() bfin_read32(DMA33_IRQ_STATUS) +#define bfin_write_DMA33_IRQ_STATUS(val) bfin_write32(DMA33_IRQ_STATUS, val) +#define bfin_read_DMA33_CURR_X_COUNT() bfin_read32(DMA33_CURR_X_COUNT) +#define bfin_write_DMA33_CURR_X_COUNT(val) bfin_write32(DMA33_CURR_X_COUNT, val) +#define bfin_read_DMA33_CURR_Y_COUNT() bfin_read32(DMA33_CURR_Y_COUNT) +#define bfin_write_DMA33_CURR_Y_COUNT(val) bfin_write32(DMA33_CURR_Y_COUNT, val) +#define bfin_read_DMA33_BWL_COUNT() bfin_read32(DMA33_BWL_COUNT) +#define bfin_write_DMA33_BWL_COUNT(val) bfin_write32(DMA33_BWL_COUNT, val) +#define bfin_read_DMA33_CURR_BWL_COUNT() bfin_read32(DMA33_CURR_BWL_COUNT) +#define bfin_write_DMA33_CURR_BWL_COUNT(val) bfin_write32(DMA33_CURR_BWL_COUNT, val) +#define bfin_read_DMA33_BWM_COUNT() bfin_read32(DMA33_BWM_COUNT) +#define bfin_write_DMA33_BWM_COUNT(val) bfin_write32(DMA33_BWM_COUNT, val) +#define bfin_read_DMA33_CURR_BWM_COUNT() bfin_read32(DMA33_CURR_BWM_COUNT) +#define bfin_write_DMA33_CURR_BWM_COUNT(val) bfin_write32(DMA33_CURR_BWM_COUNT, val) + +/* DMA Channel 34 Registers */ + +#define bfin_read_DMA34_NEXT_DESC_PTR() bfin_read32(DMA34_NEXT_DESC_PTR) +#define bfin_write_DMA34_NEXT_DESC_PTR(val) bfin_write32(DMA34_NEXT_DESC_PTR, val) +#define bfin_read_DMA34_START_ADDR() bfin_read32(DMA34_START_ADDR) +#define bfin_write_DMA34_START_ADDR(val) bfin_write32(DMA34_START_ADDR, val) +#define bfin_read_DMA34_CONFIG() bfin_read32(DMA34_CONFIG) +#define bfin_write_DMA34_CONFIG(val) bfin_write32(DMA34_CONFIG, val) +#define bfin_read_DMA34_X_COUNT() bfin_read32(DMA34_X_COUNT) +#define bfin_write_DMA34_X_COUNT(val) bfin_write32(DMA34_X_COUNT, val) +#define bfin_read_DMA34_X_MODIFY() bfin_read32(DMA34_X_MODIFY) +#define bfin_write_DMA34_X_MODIFY(val) bfin_write32(DMA34_X_MODIFY, val) +#define bfin_read_DMA34_Y_COUNT() bfin_read32(DMA34_Y_COUNT) +#define bfin_write_DMA34_Y_COUNT(val) bfin_write32(DMA34_Y_COUNT, val) +#define bfin_read_DMA34_Y_MODIFY() bfin_read32(DMA34_Y_MODIFY) +#define bfin_write_DMA34_Y_MODIFY(val) bfin_write32(DMA34_Y_MODIFY, val) +#define bfin_read_DMA34_CURR_DESC_PTR() bfin_read32(DMA34_CURR_DESC_PTR) +#define bfin_write_DMA34_CURR_DESC_PTR(val) bfin_write32(DMA34_CURR_DESC_PTR, val) +#define bfin_read_DMA34_PREV_DESC_PTR() bfin_read32(DMA34_PREV_DESC_PTR) +#define bfin_write_DMA34_PREV_DESC_PTR(val) bfin_write32(DMA34_PREV_DESC_PTR, val) +#define bfin_read_DMA34_CURR_ADDR() bfin_read32(DMA34_CURR_ADDR) +#define bfin_write_DMA34_CURR_ADDR(val) bfin_write32(DMA34_CURR_ADDR, val) +#define bfin_read_DMA34_IRQ_STATUS() bfin_read32(DMA34_IRQ_STATUS) +#define bfin_write_DMA34_IRQ_STATUS(val) bfin_write32(DMA34_IRQ_STATUS, val) +#define bfin_read_DMA34_CURR_X_COUNT() bfin_read32(DMA34_CURR_X_COUNT) +#define bfin_write_DMA34_CURR_X_COUNT(val) bfin_write32(DMA34_CURR_X_COUNT, val) +#define bfin_read_DMA34_CURR_Y_COUNT() bfin_read32(DMA34_CURR_Y_COUNT) +#define bfin_write_DMA34_CURR_Y_COUNT(val) bfin_write32(DMA34_CURR_Y_COUNT, val) +#define bfin_read_DMA34_BWL_COUNT() bfin_read32(DMA34_BWL_COUNT) +#define bfin_write_DMA34_BWL_COUNT(val) bfin_write32(DMA34_BWL_COUNT, val) +#define bfin_read_DMA34_CURR_BWL_COUNT() bfin_read32(DMA34_CURR_BWL_COUNT) +#define bfin_write_DMA34_CURR_BWL_COUNT(val) bfin_write32(DMA34_CURR_BWL_COUNT, val) +#define bfin_read_DMA34_BWM_COUNT() bfin_read32(DMA34_BWM_COUNT) +#define bfin_write_DMA34_BWM_COUNT(val) bfin_write32(DMA34_BWM_COUNT, val) +#define bfin_read_DMA34_CURR_BWM_COUNT() bfin_read32(DMA34_CURR_BWM_COUNT) +#define bfin_write_DMA34_CURR_BWM_COUNT(val) bfin_write32(DMA34_CURR_BWM_COUNT, val) + +/* DMA Channel 35 Registers */ + +#define bfin_read_DMA35_NEXT_DESC_PTR() bfin_read32(DMA35_NEXT_DESC_PTR) +#define bfin_write_DMA35_NEXT_DESC_PTR(val) bfin_write32(DMA35_NEXT_DESC_PTR, val) +#define bfin_read_DMA35_START_ADDR() bfin_read32(DMA35_START_ADDR) +#define bfin_write_DMA35_START_ADDR(val) bfin_write32(DMA35_START_ADDR, val) +#define bfin_read_DMA35_CONFIG() bfin_read32(DMA35_CONFIG) +#define bfin_write_DMA35_CONFIG(val) bfin_write32(DMA35_CONFIG, val) +#define bfin_read_DMA35_X_COUNT() bfin_read32(DMA35_X_COUNT) +#define bfin_write_DMA35_X_COUNT(val) bfin_write32(DMA35_X_COUNT, val) +#define bfin_read_DMA35_X_MODIFY() bfin_read32(DMA35_X_MODIFY) +#define bfin_write_DMA35_X_MODIFY(val) bfin_write32(DMA35_X_MODIFY, val) +#define bfin_read_DMA35_Y_COUNT() bfin_read32(DMA35_Y_COUNT) +#define bfin_write_DMA35_Y_COUNT(val) bfin_write32(DMA35_Y_COUNT, val) +#define bfin_read_DMA35_Y_MODIFY() bfin_read32(DMA35_Y_MODIFY) +#define bfin_write_DMA35_Y_MODIFY(val) bfin_write32(DMA35_Y_MODIFY, val) +#define bfin_read_DMA35_CURR_DESC_PTR() bfin_read32(DMA35_CURR_DESC_PTR) +#define bfin_write_DMA35_CURR_DESC_PTR(val) bfin_write32(DMA35_CURR_DESC_PTR, val) +#define bfin_read_DMA35_PREV_DESC_PTR() bfin_read32(DMA35_PREV_DESC_PTR) +#define bfin_write_DMA35_PREV_DESC_PTR(val) bfin_write32(DMA35_PREV_DESC_PTR, val) +#define bfin_read_DMA35_CURR_ADDR() bfin_read32(DMA35_CURR_ADDR) +#define bfin_write_DMA35_CURR_ADDR(val) bfin_write32(DMA35_CURR_ADDR, val) +#define bfin_read_DMA35_IRQ_STATUS() bfin_read32(DMA35_IRQ_STATUS) +#define bfin_write_DMA35_IRQ_STATUS(val) bfin_write32(DMA35_IRQ_STATUS, val) +#define bfin_read_DMA35_CURR_X_COUNT() bfin_read32(DMA35_CURR_X_COUNT) +#define bfin_write_DMA35_CURR_X_COUNT(val) bfin_write32(DMA35_CURR_X_COUNT, val) +#define bfin_read_DMA35_CURR_Y_COUNT() bfin_read32(DMA35_CURR_Y_COUNT) +#define bfin_write_DMA35_CURR_Y_COUNT(val) bfin_write32(DMA35_CURR_Y_COUNT, val) +#define bfin_read_DMA35_BWL_COUNT() bfin_read32(DMA35_BWL_COUNT) +#define bfin_write_DMA35_BWL_COUNT(val) bfin_write32(DMA35_BWL_COUNT, val) +#define bfin_read_DMA35_CURR_BWL_COUNT() bfin_read32(DMA35_CURR_BWL_COUNT) +#define bfin_write_DMA35_CURR_BWL_COUNT(val) bfin_write32(DMA35_CURR_BWL_COUNT, val) +#define bfin_read_DMA35_BWM_COUNT() bfin_read32(DMA35_BWM_COUNT) +#define bfin_write_DMA35_BWM_COUNT(val) bfin_write32(DMA35_BWM_COUNT, val) +#define bfin_read_DMA35_CURR_BWM_COUNT() bfin_read32(DMA35_CURR_BWM_COUNT) +#define bfin_write_DMA35_CURR_BWM_COUNT(val) bfin_write32(DMA35_CURR_BWM_COUNT, val) + +/* DMA Channel 36 Registers */ + +#define bfin_read_DMA36_NEXT_DESC_PTR() bfin_read32(DMA36_NEXT_DESC_PTR) +#define bfin_write_DMA36_NEXT_DESC_PTR(val) bfin_write32(DMA36_NEXT_DESC_PTR, val) +#define bfin_read_DMA36_START_ADDR() bfin_read32(DMA36_START_ADDR) +#define bfin_write_DMA36_START_ADDR(val) bfin_write32(DMA36_START_ADDR, val) +#define bfin_read_DMA36_CONFIG() bfin_read32(DMA36_CONFIG) +#define bfin_write_DMA36_CONFIG(val) bfin_write32(DMA36_CONFIG, val) +#define bfin_read_DMA36_X_COUNT() bfin_read32(DMA36_X_COUNT) +#define bfin_write_DMA36_X_COUNT(val) bfin_write32(DMA36_X_COUNT, val) +#define bfin_read_DMA36_X_MODIFY() bfin_read32(DMA36_X_MODIFY) +#define bfin_write_DMA36_X_MODIFY(val) bfin_write32(DMA36_X_MODIFY, val) +#define bfin_read_DMA36_Y_COUNT() bfin_read32(DMA36_Y_COUNT) +#define bfin_write_DMA36_Y_COUNT(val) bfin_write32(DMA36_Y_COUNT, val) +#define bfin_read_DMA36_Y_MODIFY() bfin_read32(DMA36_Y_MODIFY) +#define bfin_write_DMA36_Y_MODIFY(val) bfin_write32(DMA36_Y_MODIFY, val) +#define bfin_read_DMA36_CURR_DESC_PTR() bfin_read32(DMA36_CURR_DESC_PTR) +#define bfin_write_DMA36_CURR_DESC_PTR(val) bfin_write32(DMA36_CURR_DESC_PTR, val) +#define bfin_read_DMA36_PREV_DESC_PTR() bfin_read32(DMA36_PREV_DESC_PTR) +#define bfin_write_DMA36_PREV_DESC_PTR(val) bfin_write32(DMA36_PREV_DESC_PTR, val) +#define bfin_read_DMA36_CURR_ADDR() bfin_read32(DMA36_CURR_ADDR) +#define bfin_write_DMA36_CURR_ADDR(val) bfin_write32(DMA36_CURR_ADDR, val) +#define bfin_read_DMA36_IRQ_STATUS() bfin_read32(DMA36_IRQ_STATUS) +#define bfin_write_DMA36_IRQ_STATUS(val) bfin_write32(DMA36_IRQ_STATUS, val) +#define bfin_read_DMA36_CURR_X_COUNT() bfin_read32(DMA36_CURR_X_COUNT) +#define bfin_write_DMA36_CURR_X_COUNT(val) bfin_write32(DMA36_CURR_X_COUNT, val) +#define bfin_read_DMA36_CURR_Y_COUNT() bfin_read32(DMA36_CURR_Y_COUNT) +#define bfin_write_DMA36_CURR_Y_COUNT(val) bfin_write32(DMA36_CURR_Y_COUNT, val) +#define bfin_read_DMA36_BWL_COUNT() bfin_read32(DMA36_BWL_COUNT) +#define bfin_write_DMA36_BWL_COUNT(val) bfin_write32(DMA36_BWL_COUNT, val) +#define bfin_read_DMA36_CURR_BWL_COUNT() bfin_read32(DMA36_CURR_BWL_COUNT) +#define bfin_write_DMA36_CURR_BWL_COUNT(val) bfin_write32(DMA36_CURR_BWL_COUNT, val) +#define bfin_read_DMA36_BWM_COUNT() bfin_read32(DMA36_BWM_COUNT) +#define bfin_write_DMA36_BWM_COUNT(val) bfin_write32(DMA36_BWM_COUNT, val) +#define bfin_read_DMA36_CURR_BWM_COUNT() bfin_read32(DMA36_CURR_BWM_COUNT) +#define bfin_write_DMA36_CURR_BWM_COUNT(val) bfin_write32(DMA36_CURR_BWM_COUNT, val) + +/* DMA Channel 37 Registers */ + +#define bfin_read_DMA37_NEXT_DESC_PTR() bfin_read32(DMA37_NEXT_DESC_PTR) +#define bfin_write_DMA37_NEXT_DESC_PTR(val) bfin_write32(DMA37_NEXT_DESC_PTR, val) +#define bfin_read_DMA37_START_ADDR() bfin_read32(DMA37_START_ADDR) +#define bfin_write_DMA37_START_ADDR(val) bfin_write32(DMA37_START_ADDR, val) +#define bfin_read_DMA37_CONFIG() bfin_read32(DMA37_CONFIG) +#define bfin_write_DMA37_CONFIG(val) bfin_write32(DMA37_CONFIG, val) +#define bfin_read_DMA37_X_COUNT() bfin_read32(DMA37_X_COUNT) +#define bfin_write_DMA37_X_COUNT(val) bfin_write32(DMA37_X_COUNT, val) +#define bfin_read_DMA37_X_MODIFY() bfin_read32(DMA37_X_MODIFY) +#define bfin_write_DMA37_X_MODIFY(val) bfin_write32(DMA37_X_MODIFY, val) +#define bfin_read_DMA37_Y_COUNT() bfin_read32(DMA37_Y_COUNT) +#define bfin_write_DMA37_Y_COUNT(val) bfin_write32(DMA37_Y_COUNT, val) +#define bfin_read_DMA37_Y_MODIFY() bfin_read32(DMA37_Y_MODIFY) +#define bfin_write_DMA37_Y_MODIFY(val) bfin_write32(DMA37_Y_MODIFY, val) +#define bfin_read_DMA37_CURR_DESC_PTR() bfin_read32(DMA37_CURR_DESC_PTR) +#define bfin_write_DMA37_CURR_DESC_PTR(val) bfin_write32(DMA37_CURR_DESC_PTR, val) +#define bfin_read_DMA37_PREV_DESC_PTR() bfin_read32(DMA37_PREV_DESC_PTR) +#define bfin_write_DMA37_PREV_DESC_PTR(val) bfin_write32(DMA37_PREV_DESC_PTR, val) +#define bfin_read_DMA37_CURR_ADDR() bfin_read32(DMA37_CURR_ADDR) +#define bfin_write_DMA37_CURR_ADDR(val) bfin_write32(DMA37_CURR_ADDR, val) +#define bfin_read_DMA37_IRQ_STATUS() bfin_read32(DMA37_IRQ_STATUS) +#define bfin_write_DMA37_IRQ_STATUS(val) bfin_write32(DMA37_IRQ_STATUS, val) +#define bfin_read_DMA37_CURR_X_COUNT() bfin_read32(DMA37_CURR_X_COUNT) +#define bfin_write_DMA37_CURR_X_COUNT(val) bfin_write32(DMA37_CURR_X_COUNT, val) +#define bfin_read_DMA37_CURR_Y_COUNT() bfin_read32(DMA37_CURR_Y_COUNT) +#define bfin_write_DMA37_CURR_Y_COUNT(val) bfin_write32(DMA37_CURR_Y_COUNT, val) +#define bfin_read_DMA37_BWL_COUNT() bfin_read32(DMA37_BWL_COUNT) +#define bfin_write_DMA37_BWL_COUNT(val) bfin_write32(DMA37_BWL_COUNT, val) +#define bfin_read_DMA37_CURR_BWL_COUNT() bfin_read32(DMA37_CURR_BWL_COUNT) +#define bfin_write_DMA37_CURR_BWL_COUNT(val) bfin_write32(DMA37_CURR_BWL_COUNT, val) +#define bfin_read_DMA37_BWM_COUNT() bfin_read32(DMA37_BWM_COUNT) +#define bfin_write_DMA37_BWM_COUNT(val) bfin_write32(DMA37_BWM_COUNT, val) +#define bfin_read_DMA37_CURR_BWM_COUNT() bfin_read32(DMA37_CURR_BWM_COUNT) +#define bfin_write_DMA37_CURR_BWM_COUNT(val) bfin_write32(DMA37_CURR_BWM_COUNT, val) + +/* DMA Channel 38 Registers */ + +#define bfin_read_DMA38_NEXT_DESC_PTR() bfin_read32(DMA38_NEXT_DESC_PTR) +#define bfin_write_DMA38_NEXT_DESC_PTR(val) bfin_write32(DMA38_NEXT_DESC_PTR, val) +#define bfin_read_DMA38_START_ADDR() bfin_read32(DMA38_START_ADDR) +#define bfin_write_DMA38_START_ADDR(val) bfin_write32(DMA38_START_ADDR, val) +#define bfin_read_DMA38_CONFIG() bfin_read32(DMA38_CONFIG) +#define bfin_write_DMA38_CONFIG(val) bfin_write32(DMA38_CONFIG, val) +#define bfin_read_DMA38_X_COUNT() bfin_read32(DMA38_X_COUNT) +#define bfin_write_DMA38_X_COUNT(val) bfin_write32(DMA38_X_COUNT, val) +#define bfin_read_DMA38_X_MODIFY() bfin_read32(DMA38_X_MODIFY) +#define bfin_write_DMA38_X_MODIFY(val) bfin_write32(DMA38_X_MODIFY, val) +#define bfin_read_DMA38_Y_COUNT() bfin_read32(DMA38_Y_COUNT) +#define bfin_write_DMA38_Y_COUNT(val) bfin_write32(DMA38_Y_COUNT, val) +#define bfin_read_DMA38_Y_MODIFY() bfin_read32(DMA38_Y_MODIFY) +#define bfin_write_DMA38_Y_MODIFY(val) bfin_write32(DMA38_Y_MODIFY, val) +#define bfin_read_DMA38_CURR_DESC_PTR() bfin_read32(DMA38_CURR_DESC_PTR) +#define bfin_write_DMA38_CURR_DESC_PTR(val) bfin_write32(DMA38_CURR_DESC_PTR, val) +#define bfin_read_DMA38_PREV_DESC_PTR() bfin_read32(DMA38_PREV_DESC_PTR) +#define bfin_write_DMA38_PREV_DESC_PTR(val) bfin_write32(DMA38_PREV_DESC_PTR, val) +#define bfin_read_DMA38_CURR_ADDR() bfin_read32(DMA38_CURR_ADDR) +#define bfin_write_DMA38_CURR_ADDR(val) bfin_write32(DMA38_CURR_ADDR, val) +#define bfin_read_DMA38_IRQ_STATUS() bfin_read32(DMA38_IRQ_STATUS) +#define bfin_write_DMA38_IRQ_STATUS(val) bfin_write32(DMA38_IRQ_STATUS, val) +#define bfin_read_DMA38_CURR_X_COUNT() bfin_read32(DMA38_CURR_X_COUNT) +#define bfin_write_DMA38_CURR_X_COUNT(val) bfin_write32(DMA38_CURR_X_COUNT, val) +#define bfin_read_DMA38_CURR_Y_COUNT() bfin_read32(DMA38_CURR_Y_COUNT) +#define bfin_write_DMA38_CURR_Y_COUNT(val) bfin_write32(DMA38_CURR_Y_COUNT, val) +#define bfin_read_DMA38_BWL_COUNT() bfin_read32(DMA38_BWL_COUNT) +#define bfin_write_DMA38_BWL_COUNT(val) bfin_write32(DMA38_BWL_COUNT, val) +#define bfin_read_DMA38_CURR_BWL_COUNT() bfin_read32(DMA38_CURR_BWL_COUNT) +#define bfin_write_DMA38_CURR_BWL_COUNT(val) bfin_write32(DMA38_CURR_BWL_COUNT, val) +#define bfin_read_DMA38_BWM_COUNT() bfin_read32(DMA38_BWM_COUNT) +#define bfin_write_DMA38_BWM_COUNT(val) bfin_write32(DMA38_BWM_COUNT, val) +#define bfin_read_DMA38_CURR_BWM_COUNT() bfin_read32(DMA38_CURR_BWM_COUNT) +#define bfin_write_DMA38_CURR_BWM_COUNT(val) bfin_write32(DMA38_CURR_BWM_COUNT, val) + +/* DMA Channel 39 Registers */ + +#define bfin_read_DMA39_NEXT_DESC_PTR() bfin_read32(DMA39_NEXT_DESC_PTR) +#define bfin_write_DMA39_NEXT_DESC_PTR(val) bfin_write32(DMA39_NEXT_DESC_PTR, val) +#define bfin_read_DMA39_START_ADDR() bfin_read32(DMA39_START_ADDR) +#define bfin_write_DMA39_START_ADDR(val) bfin_write32(DMA39_START_ADDR, val) +#define bfin_read_DMA39_CONFIG() bfin_read32(DMA39_CONFIG) +#define bfin_write_DMA39_CONFIG(val) bfin_write32(DMA39_CONFIG, val) +#define bfin_read_DMA39_X_COUNT() bfin_read32(DMA39_X_COUNT) +#define bfin_write_DMA39_X_COUNT(val) bfin_write32(DMA39_X_COUNT, val) +#define bfin_read_DMA39_X_MODIFY() bfin_read32(DMA39_X_MODIFY) +#define bfin_write_DMA39_X_MODIFY(val) bfin_write32(DMA39_X_MODIFY, val) +#define bfin_read_DMA39_Y_COUNT() bfin_read32(DMA39_Y_COUNT) +#define bfin_write_DMA39_Y_COUNT(val) bfin_write32(DMA39_Y_COUNT, val) +#define bfin_read_DMA39_Y_MODIFY() bfin_read32(DMA39_Y_MODIFY) +#define bfin_write_DMA39_Y_MODIFY(val) bfin_write32(DMA39_Y_MODIFY, val) +#define bfin_read_DMA39_CURR_DESC_PTR() bfin_read32(DMA39_CURR_DESC_PTR) +#define bfin_write_DMA39_CURR_DESC_PTR(val) bfin_write32(DMA39_CURR_DESC_PTR, val) +#define bfin_read_DMA39_PREV_DESC_PTR() bfin_read32(DMA39_PREV_DESC_PTR) +#define bfin_write_DMA39_PREV_DESC_PTR(val) bfin_write32(DMA39_PREV_DESC_PTR, val) +#define bfin_read_DMA39_CURR_ADDR() bfin_read32(DMA39_CURR_ADDR) +#define bfin_write_DMA39_CURR_ADDR(val) bfin_write32(DMA39_CURR_ADDR, val) +#define bfin_read_DMA39_IRQ_STATUS() bfin_read32(DMA39_IRQ_STATUS) +#define bfin_write_DMA39_IRQ_STATUS(val) bfin_write32(DMA39_IRQ_STATUS, val) +#define bfin_read_DMA39_CURR_X_COUNT() bfin_read32(DMA39_CURR_X_COUNT) +#define bfin_write_DMA39_CURR_X_COUNT(val) bfin_write32(DMA39_CURR_X_COUNT, val) +#define bfin_read_DMA39_CURR_Y_COUNT() bfin_read32(DMA39_CURR_Y_COUNT) +#define bfin_write_DMA39_CURR_Y_COUNT(val) bfin_write32(DMA39_CURR_Y_COUNT, val) +#define bfin_read_DMA39_BWL_COUNT() bfin_read32(DMA39_BWL_COUNT) +#define bfin_write_DMA39_BWL_COUNT(val) bfin_write32(DMA39_BWL_COUNT, val) +#define bfin_read_DMA39_CURR_BWL_COUNT() bfin_read32(DMA39_CURR_BWL_COUNT) +#define bfin_write_DMA39_CURR_BWL_COUNT(val) bfin_write32(DMA39_CURR_BWL_COUNT, val) +#define bfin_read_DMA39_BWM_COUNT() bfin_read32(DMA39_BWM_COUNT) +#define bfin_write_DMA39_BWM_COUNT(val) bfin_write32(DMA39_BWM_COUNT, val) +#define bfin_read_DMA39_CURR_BWM_COUNT() bfin_read32(DMA39_CURR_BWM_COUNT) +#define bfin_write_DMA39_CURR_BWM_COUNT(val) bfin_write32(DMA39_CURR_BWM_COUNT, val) + +/* DMA Channel 40 Registers */ + +#define bfin_read_DMA40_NEXT_DESC_PTR() bfin_read32(DMA40_NEXT_DESC_PTR) +#define bfin_write_DMA40_NEXT_DESC_PTR(val) bfin_write32(DMA40_NEXT_DESC_PTR, val) +#define bfin_read_DMA40_START_ADDR() bfin_read32(DMA40_START_ADDR) +#define bfin_write_DMA40_START_ADDR(val) bfin_write32(DMA40_START_ADDR, val) +#define bfin_read_DMA40_CONFIG() bfin_read32(DMA40_CONFIG) +#define bfin_write_DMA40_CONFIG(val) bfin_write32(DMA40_CONFIG, val) +#define bfin_read_DMA40_X_COUNT() bfin_read32(DMA40_X_COUNT) +#define bfin_write_DMA40_X_COUNT(val) bfin_write32(DMA40_X_COUNT, val) +#define bfin_read_DMA40_X_MODIFY() bfin_read32(DMA40_X_MODIFY) +#define bfin_write_DMA40_X_MODIFY(val) bfin_write32(DMA40_X_MODIFY, val) +#define bfin_read_DMA40_Y_COUNT() bfin_read32(DMA40_Y_COUNT) +#define bfin_write_DMA40_Y_COUNT(val) bfin_write32(DMA40_Y_COUNT, val) +#define bfin_read_DMA40_Y_MODIFY() bfin_read32(DMA40_Y_MODIFY) +#define bfin_write_DMA40_Y_MODIFY(val) bfin_write32(DMA40_Y_MODIFY, val) +#define bfin_read_DMA40_CURR_DESC_PTR() bfin_read32(DMA40_CURR_DESC_PTR) +#define bfin_write_DMA40_CURR_DESC_PTR(val) bfin_write32(DMA40_CURR_DESC_PTR, val) +#define bfin_read_DMA40_PREV_DESC_PTR() bfin_read32(DMA40_PREV_DESC_PTR) +#define bfin_write_DMA40_PREV_DESC_PTR(val) bfin_write32(DMA40_PREV_DESC_PTR, val) +#define bfin_read_DMA40_CURR_ADDR() bfin_read32(DMA40_CURR_ADDR) +#define bfin_write_DMA40_CURR_ADDR(val) bfin_write32(DMA40_CURR_ADDR, val) +#define bfin_read_DMA40_IRQ_STATUS() bfin_read32(DMA40_IRQ_STATUS) +#define bfin_write_DMA40_IRQ_STATUS(val) bfin_write32(DMA40_IRQ_STATUS, val) +#define bfin_read_DMA40_CURR_X_COUNT() bfin_read32(DMA40_CURR_X_COUNT) +#define bfin_write_DMA40_CURR_X_COUNT(val) bfin_write32(DMA40_CURR_X_COUNT, val) +#define bfin_read_DMA40_CURR_Y_COUNT() bfin_read32(DMA40_CURR_Y_COUNT) +#define bfin_write_DMA40_CURR_Y_COUNT(val) bfin_write32(DMA40_CURR_Y_COUNT, val) +#define bfin_read_DMA40_BWL_COUNT() bfin_read32(DMA40_BWL_COUNT) +#define bfin_write_DMA40_BWL_COUNT(val) bfin_write32(DMA40_BWL_COUNT, val) +#define bfin_read_DMA40_CURR_BWL_COUNT() bfin_read32(DMA40_CURR_BWL_COUNT) +#define bfin_write_DMA40_CURR_BWL_COUNT(val) bfin_write32(DMA40_CURR_BWL_COUNT, val) +#define bfin_read_DMA40_BWM_COUNT() bfin_read32(DMA40_BWM_COUNT) +#define bfin_write_DMA40_BWM_COUNT(val) bfin_write32(DMA40_BWM_COUNT, val) +#define bfin_read_DMA40_CURR_BWM_COUNT() bfin_read32(DMA40_CURR_BWM_COUNT) +#define bfin_write_DMA40_CURR_BWM_COUNT(val) bfin_write32(DMA40_CURR_BWM_COUNT, val) + +/* DMA Channel 41 Registers */ + +#define bfin_read_DMA41_NEXT_DESC_PTR() bfin_read32(DMA41_NEXT_DESC_PTR) +#define bfin_write_DMA41_NEXT_DESC_PTR(val) bfin_write32(DMA41_NEXT_DESC_PTR, val) +#define bfin_read_DMA41_START_ADDR() bfin_read32(DMA41_START_ADDR) +#define bfin_write_DMA41_START_ADDR(val) bfin_write32(DMA41_START_ADDR, val) +#define bfin_read_DMA41_CONFIG() bfin_read32(DMA41_CONFIG) +#define bfin_write_DMA41_CONFIG(val) bfin_write32(DMA41_CONFIG, val) +#define bfin_read_DMA41_X_COUNT() bfin_read32(DMA41_X_COUNT) +#define bfin_write_DMA41_X_COUNT(val) bfin_write32(DMA41_X_COUNT, val) +#define bfin_read_DMA41_X_MODIFY() bfin_read32(DMA41_X_MODIFY) +#define bfin_write_DMA41_X_MODIFY(val) bfin_write32(DMA41_X_MODIFY, val) +#define bfin_read_DMA41_Y_COUNT() bfin_read32(DMA41_Y_COUNT) +#define bfin_write_DMA41_Y_COUNT(val) bfin_write32(DMA41_Y_COUNT, val) +#define bfin_read_DMA41_Y_MODIFY() bfin_read32(DMA41_Y_MODIFY) +#define bfin_write_DMA41_Y_MODIFY(val) bfin_write32(DMA41_Y_MODIFY, val) +#define bfin_read_DMA41_CURR_DESC_PTR() bfin_read32(DMA41_CURR_DESC_PTR) +#define bfin_write_DMA41_CURR_DESC_PTR(val) bfin_write32(DMA41_CURR_DESC_PTR, val) +#define bfin_read_DMA41_PREV_DESC_PTR() bfin_read32(DMA41_PREV_DESC_PTR) +#define bfin_write_DMA41_PREV_DESC_PTR(val) bfin_write32(DMA41_PREV_DESC_PTR, val) +#define bfin_read_DMA41_CURR_ADDR() bfin_read32(DMA41_CURR_ADDR) +#define bfin_write_DMA41_CURR_ADDR(val) bfin_write32(DMA41_CURR_ADDR, val) +#define bfin_read_DMA41_IRQ_STATUS() bfin_read32(DMA41_IRQ_STATUS) +#define bfin_write_DMA41_IRQ_STATUS(val) bfin_write32(DMA41_IRQ_STATUS, val) +#define bfin_read_DMA41_CURR_X_COUNT() bfin_read32(DMA41_CURR_X_COUNT) +#define bfin_write_DMA41_CURR_X_COUNT(val) bfin_write32(DMA41_CURR_X_COUNT, val) +#define bfin_read_DMA41_CURR_Y_COUNT() bfin_read32(DMA41_CURR_Y_COUNT) +#define bfin_write_DMA41_CURR_Y_COUNT(val) bfin_write32(DMA41_CURR_Y_COUNT, val) +#define bfin_read_DMA41_BWL_COUNT() bfin_read32(DMA41_BWL_COUNT) +#define bfin_write_DMA41_BWL_COUNT(val) bfin_write32(DMA41_BWL_COUNT, val) +#define bfin_read_DMA41_CURR_BWL_COUNT() bfin_read32(DMA41_CURR_BWL_COUNT) +#define bfin_write_DMA41_CURR_BWL_COUNT(val) bfin_write32(DMA41_CURR_BWL_COUNT, val) +#define bfin_read_DMA41_BWM_COUNT() bfin_read32(DMA41_BWM_COUNT) +#define bfin_write_DMA41_BWM_COUNT(val) bfin_write32(DMA41_BWM_COUNT, val) +#define bfin_read_DMA41_CURR_BWM_COUNT() bfin_read32(DMA41_CURR_BWM_COUNT) +#define bfin_write_DMA41_CURR_BWM_COUNT(val) bfin_write32(DMA41_CURR_BWM_COUNT, val) + +/* DMA Channel 42 Registers */ + +#define bfin_read_DMA42_NEXT_DESC_PTR() bfin_read32(DMA42_NEXT_DESC_PTR) +#define bfin_write_DMA42_NEXT_DESC_PTR(val) bfin_write32(DMA42_NEXT_DESC_PTR, val) +#define bfin_read_DMA42_START_ADDR() bfin_read32(DMA42_START_ADDR) +#define bfin_write_DMA42_START_ADDR(val) bfin_write32(DMA42_START_ADDR, val) +#define bfin_read_DMA42_CONFIG() bfin_read32(DMA42_CONFIG) +#define bfin_write_DMA42_CONFIG(val) bfin_write32(DMA42_CONFIG, val) +#define bfin_read_DMA42_X_COUNT() bfin_read32(DMA42_X_COUNT) +#define bfin_write_DMA42_X_COUNT(val) bfin_write32(DMA42_X_COUNT, val) +#define bfin_read_DMA42_X_MODIFY() bfin_read32(DMA42_X_MODIFY) +#define bfin_write_DMA42_X_MODIFY(val) bfin_write32(DMA42_X_MODIFY, val) +#define bfin_read_DMA42_Y_COUNT() bfin_read32(DMA42_Y_COUNT) +#define bfin_write_DMA42_Y_COUNT(val) bfin_write32(DMA42_Y_COUNT, val) +#define bfin_read_DMA42_Y_MODIFY() bfin_read32(DMA42_Y_MODIFY) +#define bfin_write_DMA42_Y_MODIFY(val) bfin_write32(DMA42_Y_MODIFY, val) +#define bfin_read_DMA42_CURR_DESC_PTR() bfin_read32(DMA42_CURR_DESC_PTR) +#define bfin_write_DMA42_CURR_DESC_PTR(val) bfin_write32(DMA42_CURR_DESC_PTR, val) +#define bfin_read_DMA42_PREV_DESC_PTR() bfin_read32(DMA42_PREV_DESC_PTR) +#define bfin_write_DMA42_PREV_DESC_PTR(val) bfin_write32(DMA42_PREV_DESC_PTR, val) +#define bfin_read_DMA42_CURR_ADDR() bfin_read32(DMA42_CURR_ADDR) +#define bfin_write_DMA42_CURR_ADDR(val) bfin_write32(DMA42_CURR_ADDR, val) +#define bfin_read_DMA42_IRQ_STATUS() bfin_read32(DMA42_IRQ_STATUS) +#define bfin_write_DMA42_IRQ_STATUS(val) bfin_write32(DMA42_IRQ_STATUS, val) +#define bfin_read_DMA42_CURR_X_COUNT() bfin_read32(DMA42_CURR_X_COUNT) +#define bfin_write_DMA42_CURR_X_COUNT(val) bfin_write32(DMA42_CURR_X_COUNT, val) +#define bfin_read_DMA42_CURR_Y_COUNT() bfin_read32(DMA42_CURR_Y_COUNT) +#define bfin_write_DMA42_CURR_Y_COUNT(val) bfin_write32(DMA42_CURR_Y_COUNT, val) +#define bfin_read_DMA42_BWL_COUNT() bfin_read32(DMA42_BWL_COUNT) +#define bfin_write_DMA42_BWL_COUNT(val) bfin_write32(DMA42_BWL_COUNT, val) +#define bfin_read_DMA42_CURR_BWL_COUNT() bfin_read32(DMA42_CURR_BWL_COUNT) +#define bfin_write_DMA42_CURR_BWL_COUNT(val) bfin_write32(DMA42_CURR_BWL_COUNT, val) +#define bfin_read_DMA42_BWM_COUNT() bfin_read32(DMA42_BWM_COUNT) +#define bfin_write_DMA42_BWM_COUNT(val) bfin_write32(DMA42_BWM_COUNT, val) +#define bfin_read_DMA42_CURR_BWM_COUNT() bfin_read32(DMA42_CURR_BWM_COUNT) +#define bfin_write_DMA42_CURR_BWM_COUNT(val) bfin_write32(DMA42_CURR_BWM_COUNT, val) + +/* DMA Channel 43 Registers */ + +#define bfin_read_DMA43_NEXT_DESC_PTR() bfin_read32(DMA43_NEXT_DESC_PTR) +#define bfin_write_DMA43_NEXT_DESC_PTR(val) bfin_write32(DMA43_NEXT_DESC_PTR, val) +#define bfin_read_DMA43_START_ADDR() bfin_read32(DMA43_START_ADDR) +#define bfin_write_DMA43_START_ADDR(val) bfin_write32(DMA43_START_ADDR, val) +#define bfin_read_DMA43_CONFIG() bfin_read32(DMA43_CONFIG) +#define bfin_write_DMA43_CONFIG(val) bfin_write32(DMA43_CONFIG, val) +#define bfin_read_DMA43_X_COUNT() bfin_read32(DMA43_X_COUNT) +#define bfin_write_DMA43_X_COUNT(val) bfin_write32(DMA43_X_COUNT, val) +#define bfin_read_DMA43_X_MODIFY() bfin_read32(DMA43_X_MODIFY) +#define bfin_write_DMA43_X_MODIFY(val) bfin_write32(DMA43_X_MODIFY, val) +#define bfin_read_DMA43_Y_COUNT() bfin_read32(DMA43_Y_COUNT) +#define bfin_write_DMA43_Y_COUNT(val) bfin_write32(DMA43_Y_COUNT, val) +#define bfin_read_DMA43_Y_MODIFY() bfin_read32(DMA43_Y_MODIFY) +#define bfin_write_DMA43_Y_MODIFY(val) bfin_write32(DMA43_Y_MODIFY, val) +#define bfin_read_DMA43_CURR_DESC_PTR() bfin_read32(DMA43_CURR_DESC_PTR) +#define bfin_write_DMA43_CURR_DESC_PTR(val) bfin_write32(DMA43_CURR_DESC_PTR, val) +#define bfin_read_DMA43_PREV_DESC_PTR() bfin_read32(DMA43_PREV_DESC_PTR) +#define bfin_write_DMA43_PREV_DESC_PTR(val) bfin_write32(DMA43_PREV_DESC_PTR, val) +#define bfin_read_DMA43_CURR_ADDR() bfin_read32(DMA43_CURR_ADDR) +#define bfin_write_DMA43_CURR_ADDR(val) bfin_write32(DMA43_CURR_ADDR, val) +#define bfin_read_DMA43_IRQ_STATUS() bfin_read32(DMA43_IRQ_STATUS) +#define bfin_write_DMA43_IRQ_STATUS(val) bfin_write32(DMA43_IRQ_STATUS, val) +#define bfin_read_DMA43_CURR_X_COUNT() bfin_read32(DMA43_CURR_X_COUNT) +#define bfin_write_DMA43_CURR_X_COUNT(val) bfin_write32(DMA43_CURR_X_COUNT, val) +#define bfin_read_DMA43_CURR_Y_COUNT() bfin_read32(DMA43_CURR_Y_COUNT) +#define bfin_write_DMA43_CURR_Y_COUNT(val) bfin_write32(DMA43_CURR_Y_COUNT, val) +#define bfin_read_DMA43_BWL_COUNT() bfin_read32(DMA43_BWL_COUNT) +#define bfin_write_DMA43_BWL_COUNT(val) bfin_write32(DMA43_BWL_COUNT, val) +#define bfin_read_DMA43_CURR_BWL_COUNT() bfin_read32(DMA43_CURR_BWL_COUNT) +#define bfin_write_DMA43_CURR_BWL_COUNT(val) bfin_write32(DMA43_CURR_BWL_COUNT, val) +#define bfin_read_DMA43_BWM_COUNT() bfin_read32(DMA43_BWM_COUNT) +#define bfin_write_DMA43_BWM_COUNT(val) bfin_write32(DMA43_BWM_COUNT, val) +#define bfin_read_DMA43_CURR_BWM_COUNT() bfin_read32(DMA43_CURR_BWM_COUNT) +#define bfin_write_DMA43_CURR_BWM_COUNT(val) bfin_write32(DMA43_CURR_BWM_COUNT, val) + +/* DMA Channel 44 Registers */ + +#define bfin_read_DMA44_NEXT_DESC_PTR() bfin_read32(DMA44_NEXT_DESC_PTR) +#define bfin_write_DMA44_NEXT_DESC_PTR(val) bfin_write32(DMA44_NEXT_DESC_PTR, val) +#define bfin_read_DMA44_START_ADDR() bfin_read32(DMA44_START_ADDR) +#define bfin_write_DMA44_START_ADDR(val) bfin_write32(DMA44_START_ADDR, val) +#define bfin_read_DMA44_CONFIG() bfin_read32(DMA44_CONFIG) +#define bfin_write_DMA44_CONFIG(val) bfin_write32(DMA44_CONFIG, val) +#define bfin_read_DMA44_X_COUNT() bfin_read32(DMA44_X_COUNT) +#define bfin_write_DMA44_X_COUNT(val) bfin_write32(DMA44_X_COUNT, val) +#define bfin_read_DMA44_X_MODIFY() bfin_read32(DMA44_X_MODIFY) +#define bfin_write_DMA44_X_MODIFY(val) bfin_write32(DMA44_X_MODIFY, val) +#define bfin_read_DMA44_Y_COUNT() bfin_read32(DMA44_Y_COUNT) +#define bfin_write_DMA44_Y_COUNT(val) bfin_write32(DMA44_Y_COUNT, val) +#define bfin_read_DMA44_Y_MODIFY() bfin_read32(DMA44_Y_MODIFY) +#define bfin_write_DMA44_Y_MODIFY(val) bfin_write32(DMA44_Y_MODIFY, val) +#define bfin_read_DMA44_CURR_DESC_PTR() bfin_read32(DMA44_CURR_DESC_PTR) +#define bfin_write_DMA44_CURR_DESC_PTR(val) bfin_write32(DMA44_CURR_DESC_PTR, val) +#define bfin_read_DMA44_PREV_DESC_PTR() bfin_read32(DMA44_PREV_DESC_PTR) +#define bfin_write_DMA44_PREV_DESC_PTR(val) bfin_write32(DMA44_PREV_DESC_PTR, val) +#define bfin_read_DMA44_CURR_ADDR() bfin_read32(DMA44_CURR_ADDR) +#define bfin_write_DMA44_CURR_ADDR(val) bfin_write32(DMA44_CURR_ADDR, val) +#define bfin_read_DMA44_IRQ_STATUS() bfin_read32(DMA44_IRQ_STATUS) +#define bfin_write_DMA44_IRQ_STATUS(val) bfin_write32(DMA44_IRQ_STATUS, val) +#define bfin_read_DMA44_CURR_X_COUNT() bfin_read32(DMA44_CURR_X_COUNT) +#define bfin_write_DMA44_CURR_X_COUNT(val) bfin_write32(DMA44_CURR_X_COUNT, val) +#define bfin_read_DMA44_CURR_Y_COUNT() bfin_read32(DMA44_CURR_Y_COUNT) +#define bfin_write_DMA44_CURR_Y_COUNT(val) bfin_write32(DMA44_CURR_Y_COUNT, val) +#define bfin_read_DMA44_BWL_COUNT() bfin_read32(DMA44_BWL_COUNT) +#define bfin_write_DMA44_BWL_COUNT(val) bfin_write32(DMA44_BWL_COUNT, val) +#define bfin_read_DMA44_CURR_BWL_COUNT() bfin_read32(DMA44_CURR_BWL_COUNT) +#define bfin_write_DMA44_CURR_BWL_COUNT(val) bfin_write32(DMA44_CURR_BWL_COUNT, val) +#define bfin_read_DMA44_BWM_COUNT() bfin_read32(DMA44_BWM_COUNT) +#define bfin_write_DMA44_BWM_COUNT(val) bfin_write32(DMA44_BWM_COUNT, val) +#define bfin_read_DMA44_CURR_BWM_COUNT() bfin_read32(DMA44_CURR_BWM_COUNT) +#define bfin_write_DMA44_CURR_BWM_COUNT(val) bfin_write32(DMA44_CURR_BWM_COUNT, val) + +/* DMA Channel 45 Registers */ + +#define bfin_read_DMA45_NEXT_DESC_PTR() bfin_read32(DMA45_NEXT_DESC_PTR) +#define bfin_write_DMA45_NEXT_DESC_PTR(val) bfin_write32(DMA45_NEXT_DESC_PTR, val) +#define bfin_read_DMA45_START_ADDR() bfin_read32(DMA45_START_ADDR) +#define bfin_write_DMA45_START_ADDR(val) bfin_write32(DMA45_START_ADDR, val) +#define bfin_read_DMA45_CONFIG() bfin_read32(DMA45_CONFIG) +#define bfin_write_DMA45_CONFIG(val) bfin_write32(DMA45_CONFIG, val) +#define bfin_read_DMA45_X_COUNT() bfin_read32(DMA45_X_COUNT) +#define bfin_write_DMA45_X_COUNT(val) bfin_write32(DMA45_X_COUNT, val) +#define bfin_read_DMA45_X_MODIFY() bfin_read32(DMA45_X_MODIFY) +#define bfin_write_DMA45_X_MODIFY(val) bfin_write32(DMA45_X_MODIFY, val) +#define bfin_read_DMA45_Y_COUNT() bfin_read32(DMA45_Y_COUNT) +#define bfin_write_DMA45_Y_COUNT(val) bfin_write32(DMA45_Y_COUNT, val) +#define bfin_read_DMA45_Y_MODIFY() bfin_read32(DMA45_Y_MODIFY) +#define bfin_write_DMA45_Y_MODIFY(val) bfin_write32(DMA45_Y_MODIFY, val) +#define bfin_read_DMA45_CURR_DESC_PTR() bfin_read32(DMA45_CURR_DESC_PTR) +#define bfin_write_DMA45_CURR_DESC_PTR(val) bfin_write32(DMA45_CURR_DESC_PTR, val) +#define bfin_read_DMA45_PREV_DESC_PTR() bfin_read32(DMA45_PREV_DESC_PTR) +#define bfin_write_DMA45_PREV_DESC_PTR(val) bfin_write32(DMA45_PREV_DESC_PTR, val) +#define bfin_read_DMA45_CURR_ADDR() bfin_read32(DMA45_CURR_ADDR) +#define bfin_write_DMA45_CURR_ADDR(val) bfin_write32(DMA45_CURR_ADDR, val) +#define bfin_read_DMA45_IRQ_STATUS() bfin_read32(DMA45_IRQ_STATUS) +#define bfin_write_DMA45_IRQ_STATUS(val) bfin_write32(DMA45_IRQ_STATUS, val) +#define bfin_read_DMA45_CURR_X_COUNT() bfin_read32(DMA45_CURR_X_COUNT) +#define bfin_write_DMA45_CURR_X_COUNT(val) bfin_write32(DMA45_CURR_X_COUNT, val) +#define bfin_read_DMA45_CURR_Y_COUNT() bfin_read32(DMA45_CURR_Y_COUNT) +#define bfin_write_DMA45_CURR_Y_COUNT(val) bfin_write32(DMA45_CURR_Y_COUNT, val) +#define bfin_read_DMA45_BWL_COUNT() bfin_read32(DMA45_BWL_COUNT) +#define bfin_write_DMA45_BWL_COUNT(val) bfin_write32(DMA45_BWL_COUNT, val) +#define bfin_read_DMA45_CURR_BWL_COUNT() bfin_read32(DMA45_CURR_BWL_COUNT) +#define bfin_write_DMA45_CURR_BWL_COUNT(val) bfin_write32(DMA45_CURR_BWL_COUNT, val) +#define bfin_read_DMA45_BWM_COUNT() bfin_read32(DMA45_BWM_COUNT) +#define bfin_write_DMA45_BWM_COUNT(val) bfin_write32(DMA45_BWM_COUNT, val) +#define bfin_read_DMA45_CURR_BWM_COUNT() bfin_read32(DMA45_CURR_BWM_COUNT) +#define bfin_write_DMA45_CURR_BWM_COUNT(val) bfin_write32(DMA45_CURR_BWM_COUNT, val) + +/* DMA Channel 46 Registers */ + +#define bfin_read_DMA46_NEXT_DESC_PTR() bfin_read32(DMA46_NEXT_DESC_PTR) +#define bfin_write_DMA46_NEXT_DESC_PTR(val) bfin_write32(DMA46_NEXT_DESC_PTR, val) +#define bfin_read_DMA46_START_ADDR() bfin_read32(DMA46_START_ADDR) +#define bfin_write_DMA46_START_ADDR(val) bfin_write32(DMA46_START_ADDR, val) +#define bfin_read_DMA46_CONFIG() bfin_read32(DMA46_CONFIG) +#define bfin_write_DMA46_CONFIG(val) bfin_write32(DMA46_CONFIG, val) +#define bfin_read_DMA46_X_COUNT() bfin_read32(DMA46_X_COUNT) +#define bfin_write_DMA46_X_COUNT(val) bfin_write32(DMA46_X_COUNT, val) +#define bfin_read_DMA46_X_MODIFY() bfin_read32(DMA46_X_MODIFY) +#define bfin_write_DMA46_X_MODIFY(val) bfin_write32(DMA46_X_MODIFY, val) +#define bfin_read_DMA46_Y_COUNT() bfin_read32(DMA46_Y_COUNT) +#define bfin_write_DMA46_Y_COUNT(val) bfin_write32(DMA46_Y_COUNT, val) +#define bfin_read_DMA46_Y_MODIFY() bfin_read32(DMA46_Y_MODIFY) +#define bfin_write_DMA46_Y_MODIFY(val) bfin_write32(DMA46_Y_MODIFY, val) +#define bfin_read_DMA46_CURR_DESC_PTR() bfin_read32(DMA46_CURR_DESC_PTR) +#define bfin_write_DMA46_CURR_DESC_PTR(val) bfin_write32(DMA46_CURR_DESC_PTR, val) +#define bfin_read_DMA46_PREV_DESC_PTR() bfin_read32(DMA46_PREV_DESC_PTR) +#define bfin_write_DMA46_PREV_DESC_PTR(val) bfin_write32(DMA46_PREV_DESC_PTR, val) +#define bfin_read_DMA46_CURR_ADDR() bfin_read32(DMA46_CURR_ADDR) +#define bfin_write_DMA46_CURR_ADDR(val) bfin_write32(DMA46_CURR_ADDR, val) +#define bfin_read_DMA46_IRQ_STATUS() bfin_read32(DMA46_IRQ_STATUS) +#define bfin_write_DMA46_IRQ_STATUS(val) bfin_write32(DMA46_IRQ_STATUS, val) +#define bfin_read_DMA46_CURR_X_COUNT() bfin_read32(DMA46_CURR_X_COUNT) +#define bfin_write_DMA46_CURR_X_COUNT(val) bfin_write32(DMA46_CURR_X_COUNT, val) +#define bfin_read_DMA46_CURR_Y_COUNT() bfin_read32(DMA46_CURR_Y_COUNT) +#define bfin_write_DMA46_CURR_Y_COUNT(val) bfin_write32(DMA46_CURR_Y_COUNT, val) +#define bfin_read_DMA46_BWL_COUNT() bfin_read32(DMA46_BWL_COUNT) +#define bfin_write_DMA46_BWL_COUNT(val) bfin_write32(DMA46_BWL_COUNT, val) +#define bfin_read_DMA46_CURR_BWL_COUNT() bfin_read32(DMA46_CURR_BWL_COUNT) +#define bfin_write_DMA46_CURR_BWL_COUNT(val) bfin_write32(DMA46_CURR_BWL_COUNT, val) +#define bfin_read_DMA46_BWM_COUNT() bfin_read32(DMA46_BWM_COUNT) +#define bfin_write_DMA46_BWM_COUNT(val) bfin_write32(DMA46_BWM_COUNT, val) +#define bfin_read_DMA46_CURR_BWM_COUNT() bfin_read32(DMA46_CURR_BWM_COUNT) +#define bfin_write_DMA46_CURR_BWM_COUNT(val) bfin_write32(DMA46_CURR_BWM_COUNT, val) + + +/* EPPI1 Registers */ + + +/* Port Interrubfin_read_()t 0 Registers (32-bit) */ + +#define bfin_read_PINT0_MASK_SET() bfin_read32(PINT0_MASK_SET) +#define bfin_write_PINT0_MASK_SET(val) bfin_write32(PINT0_MASK_SET, val) +#define bfin_read_PINT0_MASK_CLEAR() bfin_read32(PINT0_MASK_CLEAR) +#define bfin_write_PINT0_MASK_CLEAR(val) bfin_write32(PINT0_MASK_CLEAR, val) +#define bfin_read_PINT0_REQUEST() bfin_read32(PINT0_REQUEST) +#define bfin_write_PINT0_REQUEST(val) bfin_write32(PINT0_REQUEST, val) +#define bfin_read_PINT0_ASSIGN() bfin_read32(PINT0_ASSIGN) +#define bfin_write_PINT0_ASSIGN(val) bfin_write32(PINT0_ASSIGN, val) +#define bfin_read_PINT0_EDGE_SET() bfin_read32(PINT0_EDGE_SET) +#define bfin_write_PINT0_EDGE_SET(val) bfin_write32(PINT0_EDGE_SET, val) +#define bfin_read_PINT0_EDGE_CLEAR() bfin_read32(PINT0_EDGE_CLEAR) +#define bfin_write_PINT0_EDGE_CLEAR(val) bfin_write32(PINT0_EDGE_CLEAR, val) +#define bfin_read_PINT0_INVERT_SET() bfin_read32(PINT0_INVERT_SET) +#define bfin_write_PINT0_INVERT_SET(val) bfin_write32(PINT0_INVERT_SET, val) +#define bfin_read_PINT0_INVERT_CLEAR() bfin_read32(PINT0_INVERT_CLEAR) +#define bfin_write_PINT0_INVERT_CLEAR(val) bfin_write32(PINT0_INVERT_CLEAR, val) +#define bfin_read_PINT0_PINSTATE() bfin_read32(PINT0_PINSTATE) +#define bfin_write_PINT0_PINSTATE(val) bfin_write32(PINT0_PINSTATE, val) +#define bfin_read_PINT0_LATCH() bfin_read32(PINT0_LATCH) +#define bfin_write_PINT0_LATCH(val) bfin_write32(PINT0_LATCH, val) + +/* Port Interrubfin_read_()t 1 Registers (32-bit) */ + +#define bfin_read_PINT1_MASK_SET() bfin_read32(PINT1_MASK_SET) +#define bfin_write_PINT1_MASK_SET(val) bfin_write32(PINT1_MASK_SET, val) +#define bfin_read_PINT1_MASK_CLEAR() bfin_read32(PINT1_MASK_CLEAR) +#define bfin_write_PINT1_MASK_CLEAR(val) bfin_write32(PINT1_MASK_CLEAR, val) +#define bfin_read_PINT1_REQUEST() bfin_read32(PINT1_REQUEST) +#define bfin_write_PINT1_REQUEST(val) bfin_write32(PINT1_REQUEST, val) +#define bfin_read_PINT1_ASSIGN() bfin_read32(PINT1_ASSIGN) +#define bfin_write_PINT1_ASSIGN(val) bfin_write32(PINT1_ASSIGN, val) +#define bfin_read_PINT1_EDGE_SET() bfin_read32(PINT1_EDGE_SET) +#define bfin_write_PINT1_EDGE_SET(val) bfin_write32(PINT1_EDGE_SET, val) +#define bfin_read_PINT1_EDGE_CLEAR() bfin_read32(PINT1_EDGE_CLEAR) +#define bfin_write_PINT1_EDGE_CLEAR(val) bfin_write32(PINT1_EDGE_CLEAR, val) +#define bfin_read_PINT1_INVERT_SET() bfin_read32(PINT1_INVERT_SET) +#define bfin_write_PINT1_INVERT_SET(val) bfin_write32(PINT1_INVERT_SET, val) +#define bfin_read_PINT1_INVERT_CLEAR() bfin_read32(PINT1_INVERT_CLEAR) +#define bfin_write_PINT1_INVERT_CLEAR(val) bfin_write32(PINT1_INVERT_CLEAR, val) +#define bfin_read_PINT1_PINSTATE() bfin_read32(PINT1_PINSTATE) +#define bfin_write_PINT1_PINSTATE(val) bfin_write32(PINT1_PINSTATE, val) +#define bfin_read_PINT1_LATCH() bfin_read32(PINT1_LATCH) +#define bfin_write_PINT1_LATCH(val) bfin_write32(PINT1_LATCH, val) + +/* Port Interrubfin_read_()t 2 Registers (32-bit) */ + +#define bfin_read_PINT2_MASK_SET() bfin_read32(PINT2_MASK_SET) +#define bfin_write_PINT2_MASK_SET(val) bfin_write32(PINT2_MASK_SET, val) +#define bfin_read_PINT2_MASK_CLEAR() bfin_read32(PINT2_MASK_CLEAR) +#define bfin_write_PINT2_MASK_CLEAR(val) bfin_write32(PINT2_MASK_CLEAR, val) +#define bfin_read_PINT2_REQUEST() bfin_read32(PINT2_REQUEST) +#define bfin_write_PINT2_REQUEST(val) bfin_write32(PINT2_REQUEST, val) +#define bfin_read_PINT2_ASSIGN() bfin_read32(PINT2_ASSIGN) +#define bfin_write_PINT2_ASSIGN(val) bfin_write32(PINT2_ASSIGN, val) +#define bfin_read_PINT2_EDGE_SET() bfin_read32(PINT2_EDGE_SET) +#define bfin_write_PINT2_EDGE_SET(val) bfin_write32(PINT2_EDGE_SET, val) +#define bfin_read_PINT2_EDGE_CLEAR() bfin_read32(PINT2_EDGE_CLEAR) +#define bfin_write_PINT2_EDGE_CLEAR(val) bfin_write32(PINT2_EDGE_CLEAR, val) +#define bfin_read_PINT2_INVERT_SET() bfin_read32(PINT2_INVERT_SET) +#define bfin_write_PINT2_INVERT_SET(val) bfin_write32(PINT2_INVERT_SET, val) +#define bfin_read_PINT2_INVERT_CLEAR() bfin_read32(PINT2_INVERT_CLEAR) +#define bfin_write_PINT2_INVERT_CLEAR(val) bfin_write32(PINT2_INVERT_CLEAR, val) +#define bfin_read_PINT2_PINSTATE() bfin_read32(PINT2_PINSTATE) +#define bfin_write_PINT2_PINSTATE(val) bfin_write32(PINT2_PINSTATE, val) +#define bfin_read_PINT2_LATCH() bfin_read32(PINT2_LATCH) +#define bfin_write_PINT2_LATCH(val) bfin_write32(PINT2_LATCH, val) + +/* Port Interrubfin_read_()t 3 Registers (32-bit) */ + +#define bfin_read_PINT3_MASK_SET() bfin_read32(PINT3_MASK_SET) +#define bfin_write_PINT3_MASK_SET(val) bfin_write32(PINT3_MASK_SET, val) +#define bfin_read_PINT3_MASK_CLEAR() bfin_read32(PINT3_MASK_CLEAR) +#define bfin_write_PINT3_MASK_CLEAR(val) bfin_write32(PINT3_MASK_CLEAR, val) +#define bfin_read_PINT3_REQUEST() bfin_read32(PINT3_REQUEST) +#define bfin_write_PINT3_REQUEST(val) bfin_write32(PINT3_REQUEST, val) +#define bfin_read_PINT3_ASSIGN() bfin_read32(PINT3_ASSIGN) +#define bfin_write_PINT3_ASSIGN(val) bfin_write32(PINT3_ASSIGN, val) +#define bfin_read_PINT3_EDGE_SET() bfin_read32(PINT3_EDGE_SET) +#define bfin_write_PINT3_EDGE_SET(val) bfin_write32(PINT3_EDGE_SET, val) +#define bfin_read_PINT3_EDGE_CLEAR() bfin_read32(PINT3_EDGE_CLEAR) +#define bfin_write_PINT3_EDGE_CLEAR(val) bfin_write32(PINT3_EDGE_CLEAR, val) +#define bfin_read_PINT3_INVERT_SET() bfin_read32(PINT3_INVERT_SET) +#define bfin_write_PINT3_INVERT_SET(val) bfin_write32(PINT3_INVERT_SET, val) +#define bfin_read_PINT3_INVERT_CLEAR() bfin_read32(PINT3_INVERT_CLEAR) +#define bfin_write_PINT3_INVERT_CLEAR(val) bfin_write32(PINT3_INVERT_CLEAR, val) +#define bfin_read_PINT3_PINSTATE() bfin_read32(PINT3_PINSTATE) +#define bfin_write_PINT3_PINSTATE(val) bfin_write32(PINT3_PINSTATE, val) +#define bfin_read_PINT3_LATCH() bfin_read32(PINT3_LATCH) +#define bfin_write_PINT3_LATCH(val) bfin_write32(PINT3_LATCH, val) + +/* Port Interrubfin_read_()t 4 Registers (32-bit) */ + +#define bfin_read_PINT4_MASK_SET() bfin_read32(PINT4_MASK_SET) +#define bfin_write_PINT4_MASK_SET(val) bfin_write32(PINT4_MASK_SET, val) +#define bfin_read_PINT4_MASK_CLEAR() bfin_read32(PINT4_MASK_CLEAR) +#define bfin_write_PINT4_MASK_CLEAR(val) bfin_write32(PINT4_MASK_CLEAR, val) +#define bfin_read_PINT4_REQUEST() bfin_read32(PINT4_REQUEST) +#define bfin_write_PINT4_REQUEST(val) bfin_write32(PINT4_REQUEST, val) +#define bfin_read_PINT4_ASSIGN() bfin_read32(PINT4_ASSIGN) +#define bfin_write_PINT4_ASSIGN(val) bfin_write32(PINT4_ASSIGN, val) +#define bfin_read_PINT4_EDGE_SET() bfin_read32(PINT4_EDGE_SET) +#define bfin_write_PINT4_EDGE_SET(val) bfin_write32(PINT4_EDGE_SET, val) +#define bfin_read_PINT4_EDGE_CLEAR() bfin_read32(PINT4_EDGE_CLEAR) +#define bfin_write_PINT4_EDGE_CLEAR(val) bfin_write32(PINT4_EDGE_CLEAR, val) +#define bfin_read_PINT4_INVERT_SET() bfin_read32(PINT4_INVERT_SET) +#define bfin_write_PINT4_INVERT_SET(val) bfin_write32(PINT4_INVERT_SET, val) +#define bfin_read_PINT4_INVERT_CLEAR() bfin_read32(PINT4_INVERT_CLEAR) +#define bfin_write_PINT4_INVERT_CLEAR(val) bfin_write32(PINT4_INVERT_CLEAR, val) +#define bfin_read_PINT4_PINSTATE() bfin_read32(PINT4_PINSTATE) +#define bfin_write_PINT4_PINSTATE(val) bfin_write32(PINT4_PINSTATE, val) +#define bfin_read_PINT4_LATCH() bfin_read32(PINT4_LATCH) +#define bfin_write_PINT4_LATCH(val) bfin_write32(PINT4_LATCH, val) + +/* Port Interrubfin_read_()t 5 Registers (32-bit) */ + +#define bfin_read_PINT5_MASK_SET() bfin_read32(PINT5_MASK_SET) +#define bfin_write_PINT5_MASK_SET(val) bfin_write32(PINT5_MASK_SET, val) +#define bfin_read_PINT5_MASK_CLEAR() bfin_read32(PINT5_MASK_CLEAR) +#define bfin_write_PINT5_MASK_CLEAR(val) bfin_write32(PINT5_MASK_CLEAR, val) +#define bfin_read_PINT5_REQUEST() bfin_read32(PINT5_REQUEST) +#define bfin_write_PINT5_REQUEST(val) bfin_write32(PINT5_REQUEST, val) +#define bfin_read_PINT5_ASSIGN() bfin_read32(PINT5_ASSIGN) +#define bfin_write_PINT5_ASSIGN(val) bfin_write32(PINT5_ASSIGN, val) +#define bfin_read_PINT5_EDGE_SET() bfin_read32(PINT5_EDGE_SET) +#define bfin_write_PINT5_EDGE_SET(val) bfin_write32(PINT5_EDGE_SET, val) +#define bfin_read_PINT5_EDGE_CLEAR() bfin_read32(PINT5_EDGE_CLEAR) +#define bfin_write_PINT5_EDGE_CLEAR(val) bfin_write32(PINT5_EDGE_CLEAR, val) +#define bfin_read_PINT5_INVERT_SET() bfin_read32(PINT5_INVERT_SET) +#define bfin_write_PINT5_INVERT_SET(val) bfin_write32(PINT5_INVERT_SET, val) +#define bfin_read_PINT5_INVERT_CLEAR() bfin_read32(PINT5_INVERT_CLEAR) +#define bfin_write_PINT5_INVERT_CLEAR(val) bfin_write32(PINT5_INVERT_CLEAR, val) +#define bfin_read_PINT5_PINSTATE() bfin_read32(PINT5_PINSTATE) +#define bfin_write_PINT5_PINSTATE(val) bfin_write32(PINT5_PINSTATE, val) +#define bfin_read_PINT5_LATCH() bfin_read32(PINT5_LATCH) +#define bfin_write_PINT5_LATCH(val) bfin_write32(PINT5_LATCH, val) + +/* Port A Registers */ + +#define bfin_read_PORTA_FER() bfin_read32(PORTA_FER) +#define bfin_write_PORTA_FER(val) bfin_write32(PORTA_FER, val) +#define bfin_read_PORTA_FER_SET() bfin_read32(PORTA_FER_SET) +#define bfin_write_PORTA_FER_SET(val) bfin_write32(PORTA_FER_SET, val) +#define bfin_read_PORTA_FER_CLEAR() bfin_read32(PORTA_FER_CLEAR) +#define bfin_write_PORTA_FER_CLEAR(val) bfin_write32(PORTA_FER_CLEAR, val) +#define bfin_read_PORTA() bfin_read32(PORTA) +#define bfin_write_PORTA(val) bfin_write32(PORTA, val) +#define bfin_read_PORTA_SET() bfin_read32(PORTA_SET) +#define bfin_write_PORTA_SET(val) bfin_write32(PORTA_SET, val) +#define bfin_read_PORTA_CLEAR() bfin_read32(PORTA_CLEAR) +#define bfin_write_PORTA_CLEAR(val) bfin_write32(PORTA_CLEAR, val) +#define bfin_read_PORTA_DIR() bfin_read32(PORTA_DIR) +#define bfin_write_PORTA_DIR(val) bfin_write32(PORTA_DIR, val) +#define bfin_read_PORTA_DIR_SET() bfin_read32(PORTA_DIR_SET) +#define bfin_write_PORTA_DIR_SET(val) bfin_write32(PORTA_DIR_SET, val) +#define bfin_read_PORTA_DIR_CLEAR() bfin_read32(PORTA_DIR_CLEAR) +#define bfin_write_PORTA_DIR_CLEAR(val) bfin_write32(PORTA_DIR_CLEAR, val) +#define bfin_read_PORTA_INEN() bfin_read32(PORTA_INEN) +#define bfin_write_PORTA_INEN(val) bfin_write32(PORTA_INEN, val) +#define bfin_read_PORTA_INEN_SET() bfin_read32(PORTA_INEN_SET) +#define bfin_write_PORTA_INEN_SET(val) bfin_write32(PORTA_INEN_SET, val) +#define bfin_read_PORTA_INEN_CLEAR() bfin_read32(PORTA_INEN_CLEAR) +#define bfin_write_PORTA_INEN_CLEAR(val) bfin_write32(PORTA_INEN_CLEAR, val) +#define bfin_read_PORTA_MUX() bfin_read32(PORTA_MUX) +#define bfin_write_PORTA_MUX(val) bfin_write32(PORTA_MUX, val) +#define bfin_read_PORTA_DATA_TGL() bfin_read32(PORTA_DATA_TGL) +#define bfin_write_PORTA_DATA_TGL(val) bfin_write32(PORTA_DATA_TGL, val) +#define bfin_read_PORTA_POL() bfin_read32(PORTA_POL) +#define bfin_write_PORTA_POL(val) bfin_write32(PORTA_POL, val) +#define bfin_read_PORTA_POL_SET() bfin_read32(PORTA_POL_SET) +#define bfin_write_PORTA_POL_SET(val) bfin_write32(PORTA_POL_SET, val) +#define bfin_read_PORTA_POL_CLEAR() bfin_read32(PORTA_POL_CLEAR) +#define bfin_write_PORTA_POL_CLEAR(val) bfin_write32(PORTA_POL_CLEAR, val) +#define bfin_read_PORTA_LOCK() bfin_read32(PORTA_LOCK) +#define bfin_write_PORTA_LOCK(val) bfin_write32(PORTA_LOCK, val) +#define bfin_read_PORTA_REVID() bfin_read32(PORTA_REVID) +#define bfin_write_PORTA_REVID(val) bfin_write32(PORTA_REVID, val) + + + +/* Port B Registers */ +#define bfin_read_PORTB_FER() bfin_read32(PORTB_FER) +#define bfin_write_PORTB_FER(val) bfin_write32(PORTB_FER, val) +#define bfin_read_PORTB_FER_SET() bfin_read32(PORTB_FER_SET) +#define bfin_write_PORTB_FER_SET(val) bfin_write32(PORTB_FER_SET, val) +#define bfin_read_PORTB_FER_CLEAR() bfin_read32(PORTB_FER_CLEAR) +#define bfin_write_PORTB_FER_CLEAR(val) bfin_write32(PORTB_FER_CLEAR, val) +#define bfin_read_PORTB() bfin_read32(PORTB) +#define bfin_write_PORTB(val) bfin_write32(PORTB, val) +#define bfin_read_PORTB_SET() bfin_read32(PORTB_SET) +#define bfin_write_PORTB_SET(val) bfin_write32(PORTB_SET, val) +#define bfin_read_PORTB_CLEAR() bfin_read32(PORTB_CLEAR) +#define bfin_write_PORTB_CLEAR(val) bfin_write32(PORTB_CLEAR, val) +#define bfin_read_PORTB_DIR() bfin_read32(PORTB_DIR) +#define bfin_write_PORTB_DIR(val) bfin_write32(PORTB_DIR, val) +#define bfin_read_PORTB_DIR_SET() bfin_read32(PORTB_DIR_SET) +#define bfin_write_PORTB_DIR_SET(val) bfin_write32(PORTB_DIR_SET, val) +#define bfin_read_PORTB_DIR_CLEAR() bfin_read32(PORTB_DIR_CLEAR) +#define bfin_write_PORTB_DIR_CLEAR(val) bfin_write32(PORTB_DIR_CLEAR, val) +#define bfin_read_PORTB_INEN() bfin_read32(PORTB_INEN) +#define bfin_write_PORTB_INEN(val) bfin_write32(PORTB_INEN, val) +#define bfin_read_PORTB_INEN_SET() bfin_read32(PORTB_INEN_SET) +#define bfin_write_PORTB_INEN_SET(val) bfin_write32(PORTB_INEN_SET, val) +#define bfin_read_PORTB_INEN_CLEAR() bfin_read32(PORTB_INEN_CLEAR) +#define bfin_write_PORTB_INEN_CLEAR(val) bfin_write32(PORTB_INEN_CLEAR, val) +#define bfin_read_PORTB_MUX() bfin_read32(PORTB_MUX) +#define bfin_write_PORTB_MUX(val) bfin_write32(PORTB_MUX, val) +#define bfin_read_PORTB_DATA_TGL() bfin_read32(PORTB_DATA_TGL) +#define bfin_write_PORTB_DATA_TGL(val) bfin_write32(PORTB_DATA_TGL, val) +#define bfin_read_PORTB_POL() bfin_read32(PORTB_POL) +#define bfin_write_PORTB_POL(val) bfin_write32(PORTB_POL, val) +#define bfin_read_PORTB_POL_SET() bfin_read32(PORTB_POL_SET) +#define bfin_write_PORTB_POL_SET(val) bfin_write32(PORTB_POL_SET, val) +#define bfin_read_PORTB_POL_CLEAR() bfin_read32(PORTB_POL_CLEAR) +#define bfin_write_PORTB_POL_CLEAR(val) bfin_write32(PORTB_POL_CLEAR, val) +#define bfin_read_PORTB_LOCK() bfin_read32(PORTB_LOCK) +#define bfin_write_PORTB_LOCK(val) bfin_write32(PORTB_LOCK, val) +#define bfin_read_PORTB_REVID() bfin_read32(PORTB_REVID) +#define bfin_write_PORTB_REVID(val) bfin_write32(PORTB_REVID, val) + + +/* Port C Registers */ +#define bfin_read_PORTC_FER() bfin_read32(PORTC_FER) +#define bfin_write_PORTC_FER(val) bfin_write32(PORTC_FER, val) +#define bfin_read_PORTC_FER_SET() bfin_read32(PORTC_FER_SET) +#define bfin_write_PORTC_FER_SET(val) bfin_write32(PORTC_FER_SET, val) +#define bfin_read_PORTC_FER_CLEAR() bfin_read32(PORTC_FER_CLEAR) +#define bfin_write_PORTC_FER_CLEAR(val) bfin_write32(PORTC_FER_CLEAR, val) +#define bfin_read_PORTC() bfin_read32(PORTC) +#define bfin_write_PORTC(val) bfin_write32(PORTC, val) +#define bfin_read_PORTC_SET() bfin_read32(PORTC_SET) +#define bfin_write_PORTC_SET(val) bfin_write32(PORTC_SET, val) +#define bfin_read_PORTC_CLEAR() bfin_read32(PORTC_CLEAR) +#define bfin_write_PORTC_CLEAR(val) bfin_write32(PORTC_CLEAR, val) +#define bfin_read_PORTC_DIR() bfin_read32(PORTC_DIR) +#define bfin_write_PORTC_DIR(val) bfin_write32(PORTC_DIR, val) +#define bfin_read_PORTC_DIR_SET() bfin_read32(PORTC_DIR_SET) +#define bfin_write_PORTC_DIR_SET(val) bfin_write32(PORTC_DIR_SET, val) +#define bfin_read_PORTC_DIR_CLEAR() bfin_read32(PORTC_DIR_CLEAR) +#define bfin_write_PORTC_DIR_CLEAR(val) bfin_write32(PORTC_DIR_CLEAR, val) +#define bfin_read_PORTC_INEN() bfin_read32(PORTC_INEN) +#define bfin_write_PORTC_INEN(val) bfin_write32(PORTC_INEN, val) +#define bfin_read_PORTC_INEN_SET() bfin_read32(PORTC_INEN_SET) +#define bfin_write_PORTC_INEN_SET(val) bfin_write32(PORTC_INEN_SET, val) +#define bfin_read_PORTC_INEN_CLEAR() bfin_read32(PORTC_INEN_CLEAR) +#define bfin_write_PORTC_INEN_CLEAR(val) bfin_write32(PORTC_INEN_CLEAR, val) +#define bfin_read_PORTC_MUX() bfin_read32(PORTC_MUX) +#define bfin_write_PORTC_MUX(val) bfin_write32(PORTC_MUX, val) +#define bfin_read_PORTC_DATA_TGL() bfin_read32(PORTC_DATA_TGL) +#define bfin_write_PORTC_DATA_TGL(val) bfin_write32(PORTC_DATA_TGL, val) +#define bfin_read_PORTC_POL() bfin_read32(PORTC_POL) +#define bfin_write_PORTC_POL(val) bfin_write32(PORTC_POL, val) +#define bfin_read_PORTC_POL_SET() bfin_read32(PORTC_POL_SET) +#define bfin_write_PORTC_POL_SET(val) bfin_write32(PORTC_POL_SET, val) +#define bfin_read_PORTC_POL_CLEAR() bfin_read32(PORTC_POL_CLEAR) +#define bfin_write_PORTC_POL_CLEAR(val) bfin_write32(PORTC_POL_CLEAR, val) +#define bfin_read_PORTC_LOCK() bfin_read32(PORTC_LOCK) +#define bfin_write_PORTC_LOCK(val) bfin_write32(PORTC_LOCK, val) +#define bfin_read_PORTC_REVID() bfin_read32(PORTC_REVID) +#define bfin_write_PORTC_REVID(val) bfin_write32(PORTC_REVID, val) + + +/* Port D Registers */ +#define bfin_read_PORTD_FER() bfin_read32(PORTD_FER) +#define bfin_write_PORTD_FER(val) bfin_write32(PORTD_FER, val) +#define bfin_read_PORTD_FER_SET() bfin_read32(PORTD_FER_SET) +#define bfin_write_PORTD_FER_SET(val) bfin_write32(PORTD_FER_SET, val) +#define bfin_read_PORTD_FER_CLEAR() bfin_read32(PORTD_FER_CLEAR) +#define bfin_write_PORTD_FER_CLEAR(val) bfin_write32(PORTD_FER_CLEAR, val) +#define bfin_read_PORTD() bfin_read32(PORTD) +#define bfin_write_PORTD(val) bfin_write32(PORTD, val) +#define bfin_read_PORTD_SET() bfin_read32(PORTD_SET) +#define bfin_write_PORTD_SET(val) bfin_write32(PORTD_SET, val) +#define bfin_read_PORTD_CLEAR() bfin_read32(PORTD_CLEAR) +#define bfin_write_PORTD_CLEAR(val) bfin_write32(PORTD_CLEAR, val) +#define bfin_read_PORTD_DIR() bfin_read32(PORTD_DIR) +#define bfin_write_PORTD_DIR(val) bfin_write32(PORTD_DIR, val) +#define bfin_read_PORTD_DIR_SET() bfin_read32(PORTD_DIR_SET) +#define bfin_write_PORTD_DIR_SET(val) bfin_write32(PORTD_DIR_SET, val) +#define bfin_read_PORTD_DIR_CLEAR() bfin_read32(PORTD_DIR_CLEAR) +#define bfin_write_PORTD_DIR_CLEAR(val) bfin_write32(PORTD_DIR_CLEAR, val) +#define bfin_read_PORTD_INEN() bfin_read32(PORTD_INEN) +#define bfin_write_PORTD_INEN(val) bfin_write32(PORTD_INEN, val) +#define bfin_read_PORTD_INEN_SET() bfin_read32(PORTD_INEN_SET) +#define bfin_write_PORTD_INEN_SET(val) bfin_write32(PORTD_INEN_SET, val) +#define bfin_read_PORTD_INEN_CLEAR() bfin_read32(PORTD_INEN_CLEAR) +#define bfin_write_PORTD_INEN_CLEAR(val) bfin_write32(PORTD_INEN_CLEAR, val) +#define bfin_read_PORTD_MUX() bfin_read32(PORTD_MUX) +#define bfin_write_PORTD_MUX(val) bfin_write32(PORTD_MUX, val) +#define bfin_read_PORTD_DATA_TGL() bfin_read32(PORTD_DATA_TGL) +#define bfin_write_PORTD_DATA_TGL(val) bfin_write32(PORTD_DATA_TGL, val) +#define bfin_read_PORTD_POL() bfin_read32(PORTD_POL) +#define bfin_write_PORTD_POL(val) bfin_write32(PORTD_POL, val) +#define bfin_read_PORTD_POL_SET() bfin_read32(PORTD_POL_SET) +#define bfin_write_PORTD_POL_SET(val) bfin_write32(PORTD_POL_SET, val) +#define bfin_read_PORTD_POL_CLEAR() bfin_read32(PORTD_POL_CLEAR) +#define bfin_write_PORTD_POL_CLEAR(val) bfin_write32(PORTD_POL_CLEAR, val) +#define bfin_read_PORTD_LOCK() bfin_read32(PORTD_LOCK) +#define bfin_write_PORTD_LOCK(val) bfin_write32(PORTD_LOCK, val) +#define bfin_read_PORTD_REVID() bfin_read32(PORTD_REVID) +#define bfin_write_PORTD_REVID(val) bfin_write32(PORTD_REVID, val) + + +/* Port E Registers */ +#define bfin_read_PORTE_FER() bfin_read32(PORTE_FER) +#define bfin_write_PORTE_FER(val) bfin_write32(PORTE_FER, val) +#define bfin_read_PORTE_FER_SET() bfin_read32(PORTE_FER_SET) +#define bfin_write_PORTE_FER_SET(val) bfin_write32(PORTE_FER_SET, val) +#define bfin_read_PORTE_FER_CLEAR() bfin_read32(PORTE_FER_CLEAR) +#define bfin_write_PORTE_FER_CLEAR(val) bfin_write32(PORTE_FER_CLEAR, val) +#define bfin_read_PORTE() bfin_read32(PORTE) +#define bfin_write_PORTE(val) bfin_write32(PORTE, val) +#define bfin_read_PORTE_SET() bfin_read32(PORTE_SET) +#define bfin_write_PORTE_SET(val) bfin_write32(PORTE_SET, val) +#define bfin_read_PORTE_CLEAR() bfin_read32(PORTE_CLEAR) +#define bfin_write_PORTE_CLEAR(val) bfin_write32(PORTE_CLEAR, val) +#define bfin_read_PORTE_DIR() bfin_read32(PORTE_DIR) +#define bfin_write_PORTE_DIR(val) bfin_write32(PORTE_DIR, val) +#define bfin_read_PORTE_DIR_SET() bfin_read32(PORTE_DIR_SET) +#define bfin_write_PORTE_DIR_SET(val) bfin_write32(PORTE_DIR_SET, val) +#define bfin_read_PORTE_DIR_CLEAR() bfin_read32(PORTE_DIR_CLEAR) +#define bfin_write_PORTE_DIR_CLEAR(val) bfin_write32(PORTE_DIR_CLEAR, val) +#define bfin_read_PORTE_INEN() bfin_read32(PORTE_INEN) +#define bfin_write_PORTE_INEN(val) bfin_write32(PORTE_INEN, val) +#define bfin_read_PORTE_INEN_SET() bfin_read32(PORTE_INEN_SET) +#define bfin_write_PORTE_INEN_SET(val) bfin_write32(PORTE_INEN_SET, val) +#define bfin_read_PORTE_INEN_CLEAR() bfin_read32(PORTE_INEN_CLEAR) +#define bfin_write_PORTE_INEN_CLEAR(val) bfin_write32(PORTE_INEN_CLEAR, val) +#define bfin_read_PORTE_MUX() bfin_read32(PORTE_MUX) +#define bfin_write_PORTE_MUX(val) bfin_write32(PORTE_MUX, val) +#define bfin_read_PORTE_DATA_TGL() bfin_read32(PORTE_DATA_TGL) +#define bfin_write_PORTE_DATA_TGL(val) bfin_write32(PORTE_DATA_TGL, val) +#define bfin_read_PORTE_POL() bfin_read32(PORTE_POL) +#define bfin_write_PORTE_POL(val) bfin_write32(PORTE_POL, val) +#define bfin_read_PORTE_POL_SET() bfin_read32(PORTE_POL_SET) +#define bfin_write_PORTE_POL_SET(val) bfin_write32(PORTE_POL_SET, val) +#define bfin_read_PORTE_POL_CLEAR() bfin_read32(PORTE_POL_CLEAR) +#define bfin_write_PORTE_POL_CLEAR(val) bfin_write32(PORTE_POL_CLEAR, val) +#define bfin_read_PORTE_LOCK() bfin_read32(PORTE_LOCK) +#define bfin_write_PORTE_LOCK(val) bfin_write32(PORTE_LOCK, val) +#define bfin_read_PORTE_REVID() bfin_read32(PORTE_REVID) +#define bfin_write_PORTE_REVID(val) bfin_write32(PORTE_REVID, val) + + +/* Port F Registers */ +#define bfin_read_PORTF_FER() bfin_read32(PORTF_FER) +#define bfin_write_PORTF_FER(val) bfin_write32(PORTF_FER, val) +#define bfin_read_PORTF_FER_SET() bfin_read32(PORTF_FER_SET) +#define bfin_write_PORTF_FER_SET(val) bfin_write32(PORTF_FER_SET, val) +#define bfin_read_PORTF_FER_CLEAR() bfin_read32(PORTF_FER_CLEAR) +#define bfin_write_PORTF_FER_CLEAR(val) bfin_write32(PORTF_FER_CLEAR, val) +#define bfin_read_PORTF() bfin_read32(PORTF) +#define bfin_write_PORTF(val) bfin_write32(PORTF, val) +#define bfin_read_PORTF_SET() bfin_read32(PORTF_SET) +#define bfin_write_PORTF_SET(val) bfin_write32(PORTF_SET, val) +#define bfin_read_PORTF_CLEAR() bfin_read32(PORTF_CLEAR) +#define bfin_write_PORTF_CLEAR(val) bfin_write32(PORTF_CLEAR, val) +#define bfin_read_PORTF_DIR() bfin_read32(PORTF_DIR) +#define bfin_write_PORTF_DIR(val) bfin_write32(PORTF_DIR, val) +#define bfin_read_PORTF_DIR_SET() bfin_read32(PORTF_DIR_SET) +#define bfin_write_PORTF_DIR_SET(val) bfin_write32(PORTF_DIR_SET, val) +#define bfin_read_PORTF_DIR_CLEAR() bfin_read32(PORTF_DIR_CLEAR) +#define bfin_write_PORTF_DIR_CLEAR(val) bfin_write32(PORTF_DIR_CLEAR, val) +#define bfin_read_PORTF_INEN() bfin_read32(PORTF_INEN) +#define bfin_write_PORTF_INEN(val) bfin_write32(PORTF_INEN, val) +#define bfin_read_PORTF_INEN_SET() bfin_read32(PORTF_INEN_SET) +#define bfin_write_PORTF_INEN_SET(val) bfin_write32(PORTF_INEN_SET, val) +#define bfin_read_PORTF_INEN_CLEAR() bfin_read32(PORTF_INEN_CLEAR) +#define bfin_write_PORTF_INEN_CLEAR(val) bfin_write32(PORTF_INEN_CLEAR, val) +#define bfin_read_PORTF_MUX() bfin_read32(PORTF_MUX) +#define bfin_write_PORTF_MUX(val) bfin_write32(PORTF_MUX, val) +#define bfin_read_PORTF_DATA_TGL() bfin_read32(PORTF_DATA_TGL) +#define bfin_write_PORTF_DATA_TGL(val) bfin_write32(PORTF_DATA_TGL, val) +#define bfin_read_PORTF_POL() bfin_read32(PORTF_POL) +#define bfin_write_PORTF_POL(val) bfin_write32(PORTF_POL, val) +#define bfin_read_PORTF_POL_SET() bfin_read32(PORTF_POL_SET) +#define bfin_write_PORTF_POL_SET(val) bfin_write32(PORTF_POL_SET, val) +#define bfin_read_PORTF_POL_CLEAR() bfin_read32(PORTF_POL_CLEAR) +#define bfin_write_PORTF_POL_CLEAR(val) bfin_write32(PORTF_POL_CLEAR, val) +#define bfin_read_PORTF_LOCK() bfin_read32(PORTF_LOCK) +#define bfin_write_PORTF_LOCK(val) bfin_write32(PORTF_LOCK, val) +#define bfin_read_PORTF_REVID() bfin_read32(PORTF_REVID) +#define bfin_write_PORTF_REVID(val) bfin_write32(PORTF_REVID, val) + + +/* Port G Registers */ +#define bfin_read_PORTG_FER() bfin_read32(PORTG_FER) +#define bfin_write_PORTG_FER(val) bfin_write32(PORTG_FER, val) +#define bfin_read_PORTG_FER_SET() bfin_read32(PORTG_FER_SET) +#define bfin_write_PORTG_FER_SET(val) bfin_write32(PORTG_FER_SET, val) +#define bfin_read_PORTG_FER_CLEAR() bfin_read32(PORTG_FER_CLEAR) +#define bfin_write_PORTG_FER_CLEAR(val) bfin_write32(PORTG_FER_CLEAR, val) +#define bfin_read_PORTG() bfin_read32(PORTG) +#define bfin_write_PORTG(val) bfin_write32(PORTG, val) +#define bfin_read_PORTG_SET() bfin_read32(PORTG_SET) +#define bfin_write_PORTG_SET(val) bfin_write32(PORTG_SET, val) +#define bfin_read_PORTG_CLEAR() bfin_read32(PORTG_CLEAR) +#define bfin_write_PORTG_CLEAR(val) bfin_write32(PORTG_CLEAR, val) +#define bfin_read_PORTG_DIR() bfin_read32(PORTG_DIR) +#define bfin_write_PORTG_DIR(val) bfin_write32(PORTG_DIR, val) +#define bfin_read_PORTG_DIR_SET() bfin_read32(PORTG_DIR_SET) +#define bfin_write_PORTG_DIR_SET(val) bfin_write32(PORTG_DIR_SET, val) +#define bfin_read_PORTG_DIR_CLEAR() bfin_read32(PORTG_DIR_CLEAR) +#define bfin_write_PORTG_DIR_CLEAR(val) bfin_write32(PORTG_DIR_CLEAR, val) +#define bfin_read_PORTG_INEN() bfin_read32(PORTG_INEN) +#define bfin_write_PORTG_INEN(val) bfin_write32(PORTG_INEN, val) +#define bfin_read_PORTG_INEN_SET() bfin_read32(PORTG_INEN_SET) +#define bfin_write_PORTG_INEN_SET(val) bfin_write32(PORTG_INEN_SET, val) +#define bfin_read_PORTG_INEN_CLEAR() bfin_read32(PORTG_INEN_CLEAR) +#define bfin_write_PORTG_INEN_CLEAR(val) bfin_write32(PORTG_INEN_CLEAR, val) +#define bfin_read_PORTG_MUX() bfin_read32(PORTG_MUX) +#define bfin_write_PORTG_MUX(val) bfin_write32(PORTG_MUX, val) +#define bfin_read_PORTG_DATA_TGL() bfin_read32(PORTG_DATA_TGL) +#define bfin_write_PORTG_DATA_TGL(val) bfin_write32(PORTG_DATA_TGL, val) +#define bfin_read_PORTG_POL() bfin_read32(PORTG_POL) +#define bfin_write_PORTG_POL(val) bfin_write32(PORTG_POL, val) +#define bfin_read_PORTG_POL_SET() bfin_read32(PORTG_POL_SET) +#define bfin_write_PORTG_POL_SET(val) bfin_write32(PORTG_POL_SET, val) +#define bfin_read_PORTG_POL_CLEAR() bfin_read32(PORTG_POL_CLEAR) +#define bfin_write_PORTG_POL_CLEAR(val) bfin_write32(PORTG_POL_CLEAR, val) +#define bfin_read_PORTG_LOCK() bfin_read32(PORTG_LOCK) +#define bfin_write_PORTG_LOCK(val) bfin_write32(PORTG_LOCK, val) +#define bfin_read_PORTG_REVID() bfin_read32(PORTG_REVID) +#define bfin_write_PORTG_REVID(val) bfin_write32(PORTG_REVID, val) + + + + +/* CAN Controller 0 Config 1 Registers */ + +#define bfin_read_CAN0_MC1() bfin_read16(CAN0_MC1) +#define bfin_write_CAN0_MC1(val) bfin_write16(CAN0_MC1, val) +#define bfin_read_CAN0_MD1() bfin_read16(CAN0_MD1) +#define bfin_write_CAN0_MD1(val) bfin_write16(CAN0_MD1, val) +#define bfin_read_CAN0_TRS1() bfin_read16(CAN0_TRS1) +#define bfin_write_CAN0_TRS1(val) bfin_write16(CAN0_TRS1, val) +#define bfin_read_CAN0_TRR1() bfin_read16(CAN0_TRR1) +#define bfin_write_CAN0_TRR1(val) bfin_write16(CAN0_TRR1, val) +#define bfin_read_CAN0_TA1() bfin_read16(CAN0_TA1) +#define bfin_write_CAN0_TA1(val) bfin_write16(CAN0_TA1, val) +#define bfin_read_CAN0_AA1() bfin_read16(CAN0_AA1) +#define bfin_write_CAN0_AA1(val) bfin_write16(CAN0_AA1, val) +#define bfin_read_CAN0_RMP1() bfin_read16(CAN0_RMP1) +#define bfin_write_CAN0_RMP1(val) bfin_write16(CAN0_RMP1, val) +#define bfin_read_CAN0_RML1() bfin_read16(CAN0_RML1) +#define bfin_write_CAN0_RML1(val) bfin_write16(CAN0_RML1, val) +#define bfin_read_CAN0_MBTIF1() bfin_read16(CAN0_MBTIF1) +#define bfin_write_CAN0_MBTIF1(val) bfin_write16(CAN0_MBTIF1, val) +#define bfin_read_CAN0_MBRIF1() bfin_read16(CAN0_MBRIF1) +#define bfin_write_CAN0_MBRIF1(val) bfin_write16(CAN0_MBRIF1, val) +#define bfin_read_CAN0_MBIM1() bfin_read16(CAN0_MBIM1) +#define bfin_write_CAN0_MBIM1(val) bfin_write16(CAN0_MBIM1, val) +#define bfin_read_CAN0_RFH1() bfin_read16(CAN0_RFH1) +#define bfin_write_CAN0_RFH1(val) bfin_write16(CAN0_RFH1, val) +#define bfin_read_CAN0_OPSS1() bfin_read16(CAN0_OPSS1) +#define bfin_write_CAN0_OPSS1(val) bfin_write16(CAN0_OPSS1, val) + +/* CAN Controller 0 Config 2 Registers */ + +#define bfin_read_CAN0_MC2() bfin_read16(CAN0_MC2) +#define bfin_write_CAN0_MC2(val) bfin_write16(CAN0_MC2, val) +#define bfin_read_CAN0_MD2() bfin_read16(CAN0_MD2) +#define bfin_write_CAN0_MD2(val) bfin_write16(CAN0_MD2, val) +#define bfin_read_CAN0_TRS2() bfin_read16(CAN0_TRS2) +#define bfin_write_CAN0_TRS2(val) bfin_write16(CAN0_TRS2, val) +#define bfin_read_CAN0_TRR2() bfin_read16(CAN0_TRR2) +#define bfin_write_CAN0_TRR2(val) bfin_write16(CAN0_TRR2, val) +#define bfin_read_CAN0_TA2() bfin_read16(CAN0_TA2) +#define bfin_write_CAN0_TA2(val) bfin_write16(CAN0_TA2, val) +#define bfin_read_CAN0_AA2() bfin_read16(CAN0_AA2) +#define bfin_write_CAN0_AA2(val) bfin_write16(CAN0_AA2, val) +#define bfin_read_CAN0_RMP2() bfin_read16(CAN0_RMP2) +#define bfin_write_CAN0_RMP2(val) bfin_write16(CAN0_RMP2, val) +#define bfin_read_CAN0_RML2() bfin_read16(CAN0_RML2) +#define bfin_write_CAN0_RML2(val) bfin_write16(CAN0_RML2, val) +#define bfin_read_CAN0_MBTIF2() bfin_read16(CAN0_MBTIF2) +#define bfin_write_CAN0_MBTIF2(val) bfin_write16(CAN0_MBTIF2, val) +#define bfin_read_CAN0_MBRIF2() bfin_read16(CAN0_MBRIF2) +#define bfin_write_CAN0_MBRIF2(val) bfin_write16(CAN0_MBRIF2, val) +#define bfin_read_CAN0_MBIM2() bfin_read16(CAN0_MBIM2) +#define bfin_write_CAN0_MBIM2(val) bfin_write16(CAN0_MBIM2, val) +#define bfin_read_CAN0_RFH2() bfin_read16(CAN0_RFH2) +#define bfin_write_CAN0_RFH2(val) bfin_write16(CAN0_RFH2, val) +#define bfin_read_CAN0_OPSS2() bfin_read16(CAN0_OPSS2) +#define bfin_write_CAN0_OPSS2(val) bfin_write16(CAN0_OPSS2, val) + +/* CAN Controller 0 Clock/Interrubfin_read_()t/Counter Registers */ + +#define bfin_read_CAN0_CLOCK() bfin_read16(CAN0_CLOCK) +#define bfin_write_CAN0_CLOCK(val) bfin_write16(CAN0_CLOCK, val) +#define bfin_read_CAN0_TIMING() bfin_read16(CAN0_TIMING) +#define bfin_write_CAN0_TIMING(val) bfin_write16(CAN0_TIMING, val) +#define bfin_read_CAN0_DEBUG() bfin_read16(CAN0_DEBUG) +#define bfin_write_CAN0_DEBUG(val) bfin_write16(CAN0_DEBUG, val) +#define bfin_read_CAN0_STATUS() bfin_read16(CAN0_STATUS) +#define bfin_write_CAN0_STATUS(val) bfin_write16(CAN0_STATUS, val) +#define bfin_read_CAN0_CEC() bfin_read16(CAN0_CEC) +#define bfin_write_CAN0_CEC(val) bfin_write16(CAN0_CEC, val) +#define bfin_read_CAN0_GIS() bfin_read16(CAN0_GIS) +#define bfin_write_CAN0_GIS(val) bfin_write16(CAN0_GIS, val) +#define bfin_read_CAN0_GIM() bfin_read16(CAN0_GIM) +#define bfin_write_CAN0_GIM(val) bfin_write16(CAN0_GIM, val) +#define bfin_read_CAN0_GIF() bfin_read16(CAN0_GIF) +#define bfin_write_CAN0_GIF(val) bfin_write16(CAN0_GIF, val) +#define bfin_read_CAN0_CONTROL() bfin_read16(CAN0_CONTROL) +#define bfin_write_CAN0_CONTROL(val) bfin_write16(CAN0_CONTROL, val) +#define bfin_read_CAN0_INTR() bfin_read16(CAN0_INTR) +#define bfin_write_CAN0_INTR(val) bfin_write16(CAN0_INTR, val) +#define bfin_read_CAN0_MBTD() bfin_read16(CAN0_MBTD) +#define bfin_write_CAN0_MBTD(val) bfin_write16(CAN0_MBTD, val) +#define bfin_read_CAN0_EWR() bfin_read16(CAN0_EWR) +#define bfin_write_CAN0_EWR(val) bfin_write16(CAN0_EWR, val) +#define bfin_read_CAN0_ESR() bfin_read16(CAN0_ESR) +#define bfin_write_CAN0_ESR(val) bfin_write16(CAN0_ESR, val) +#define bfin_read_CAN0_UCCNT() bfin_read16(CAN0_UCCNT) +#define bfin_write_CAN0_UCCNT(val) bfin_write16(CAN0_UCCNT, val) +#define bfin_read_CAN0_UCRC() bfin_read16(CAN0_UCRC) +#define bfin_write_CAN0_UCRC(val) bfin_write16(CAN0_UCRC, val) +#define bfin_read_CAN0_UCCNF() bfin_read16(CAN0_UCCNF) +#define bfin_write_CAN0_UCCNF(val) bfin_write16(CAN0_UCCNF, val) + +/* CAN Controller 0 Accebfin_read_()tance Registers */ + +#define bfin_read_CAN0_AM00L() bfin_read16(CAN0_AM00L) +#define bfin_write_CAN0_AM00L(val) bfin_write16(CAN0_AM00L, val) +#define bfin_read_CAN0_AM00H() bfin_read16(CAN0_AM00H) +#define bfin_write_CAN0_AM00H(val) bfin_write16(CAN0_AM00H, val) +#define bfin_read_CAN0_AM01L() bfin_read16(CAN0_AM01L) +#define bfin_write_CAN0_AM01L(val) bfin_write16(CAN0_AM01L, val) +#define bfin_read_CAN0_AM01H() bfin_read16(CAN0_AM01H) +#define bfin_write_CAN0_AM01H(val) bfin_write16(CAN0_AM01H, val) +#define bfin_read_CAN0_AM02L() bfin_read16(CAN0_AM02L) +#define bfin_write_CAN0_AM02L(val) bfin_write16(CAN0_AM02L, val) +#define bfin_read_CAN0_AM02H() bfin_read16(CAN0_AM02H) +#define bfin_write_CAN0_AM02H(val) bfin_write16(CAN0_AM02H, val) +#define bfin_read_CAN0_AM03L() bfin_read16(CAN0_AM03L) +#define bfin_write_CAN0_AM03L(val) bfin_write16(CAN0_AM03L, val) +#define bfin_read_CAN0_AM03H() bfin_read16(CAN0_AM03H) +#define bfin_write_CAN0_AM03H(val) bfin_write16(CAN0_AM03H, val) +#define bfin_read_CAN0_AM04L() bfin_read16(CAN0_AM04L) +#define bfin_write_CAN0_AM04L(val) bfin_write16(CAN0_AM04L, val) +#define bfin_read_CAN0_AM04H() bfin_read16(CAN0_AM04H) +#define bfin_write_CAN0_AM04H(val) bfin_write16(CAN0_AM04H, val) +#define bfin_read_CAN0_AM05L() bfin_read16(CAN0_AM05L) +#define bfin_write_CAN0_AM05L(val) bfin_write16(CAN0_AM05L, val) +#define bfin_read_CAN0_AM05H() bfin_read16(CAN0_AM05H) +#define bfin_write_CAN0_AM05H(val) bfin_write16(CAN0_AM05H, val) +#define bfin_read_CAN0_AM06L() bfin_read16(CAN0_AM06L) +#define bfin_write_CAN0_AM06L(val) bfin_write16(CAN0_AM06L, val) +#define bfin_read_CAN0_AM06H() bfin_read16(CAN0_AM06H) +#define bfin_write_CAN0_AM06H(val) bfin_write16(CAN0_AM06H, val) +#define bfin_read_CAN0_AM07L() bfin_read16(CAN0_AM07L) +#define bfin_write_CAN0_AM07L(val) bfin_write16(CAN0_AM07L, val) +#define bfin_read_CAN0_AM07H() bfin_read16(CAN0_AM07H) +#define bfin_write_CAN0_AM07H(val) bfin_write16(CAN0_AM07H, val) +#define bfin_read_CAN0_AM08L() bfin_read16(CAN0_AM08L) +#define bfin_write_CAN0_AM08L(val) bfin_write16(CAN0_AM08L, val) +#define bfin_read_CAN0_AM08H() bfin_read16(CAN0_AM08H) +#define bfin_write_CAN0_AM08H(val) bfin_write16(CAN0_AM08H, val) +#define bfin_read_CAN0_AM09L() bfin_read16(CAN0_AM09L) +#define bfin_write_CAN0_AM09L(val) bfin_write16(CAN0_AM09L, val) +#define bfin_read_CAN0_AM09H() bfin_read16(CAN0_AM09H) +#define bfin_write_CAN0_AM09H(val) bfin_write16(CAN0_AM09H, val) +#define bfin_read_CAN0_AM10L() bfin_read16(CAN0_AM10L) +#define bfin_write_CAN0_AM10L(val) bfin_write16(CAN0_AM10L, val) +#define bfin_read_CAN0_AM10H() bfin_read16(CAN0_AM10H) +#define bfin_write_CAN0_AM10H(val) bfin_write16(CAN0_AM10H, val) +#define bfin_read_CAN0_AM11L() bfin_read16(CAN0_AM11L) +#define bfin_write_CAN0_AM11L(val) bfin_write16(CAN0_AM11L, val) +#define bfin_read_CAN0_AM11H() bfin_read16(CAN0_AM11H) +#define bfin_write_CAN0_AM11H(val) bfin_write16(CAN0_AM11H, val) +#define bfin_read_CAN0_AM12L() bfin_read16(CAN0_AM12L) +#define bfin_write_CAN0_AM12L(val) bfin_write16(CAN0_AM12L, val) +#define bfin_read_CAN0_AM12H() bfin_read16(CAN0_AM12H) +#define bfin_write_CAN0_AM12H(val) bfin_write16(CAN0_AM12H, val) +#define bfin_read_CAN0_AM13L() bfin_read16(CAN0_AM13L) +#define bfin_write_CAN0_AM13L(val) bfin_write16(CAN0_AM13L, val) +#define bfin_read_CAN0_AM13H() bfin_read16(CAN0_AM13H) +#define bfin_write_CAN0_AM13H(val) bfin_write16(CAN0_AM13H, val) +#define bfin_read_CAN0_AM14L() bfin_read16(CAN0_AM14L) +#define bfin_write_CAN0_AM14L(val) bfin_write16(CAN0_AM14L, val) +#define bfin_read_CAN0_AM14H() bfin_read16(CAN0_AM14H) +#define bfin_write_CAN0_AM14H(val) bfin_write16(CAN0_AM14H, val) +#define bfin_read_CAN0_AM15L() bfin_read16(CAN0_AM15L) +#define bfin_write_CAN0_AM15L(val) bfin_write16(CAN0_AM15L, val) +#define bfin_read_CAN0_AM15H() bfin_read16(CAN0_AM15H) +#define bfin_write_CAN0_AM15H(val) bfin_write16(CAN0_AM15H, val) + +/* CAN Controller 0 Accebfin_read_()tance Registers */ + +#define bfin_read_CAN0_AM16L() bfin_read16(CAN0_AM16L) +#define bfin_write_CAN0_AM16L(val) bfin_write16(CAN0_AM16L, val) +#define bfin_read_CAN0_AM16H() bfin_read16(CAN0_AM16H) +#define bfin_write_CAN0_AM16H(val) bfin_write16(CAN0_AM16H, val) +#define bfin_read_CAN0_AM17L() bfin_read16(CAN0_AM17L) +#define bfin_write_CAN0_AM17L(val) bfin_write16(CAN0_AM17L, val) +#define bfin_read_CAN0_AM17H() bfin_read16(CAN0_AM17H) +#define bfin_write_CAN0_AM17H(val) bfin_write16(CAN0_AM17H, val) +#define bfin_read_CAN0_AM18L() bfin_read16(CAN0_AM18L) +#define bfin_write_CAN0_AM18L(val) bfin_write16(CAN0_AM18L, val) +#define bfin_read_CAN0_AM18H() bfin_read16(CAN0_AM18H) +#define bfin_write_CAN0_AM18H(val) bfin_write16(CAN0_AM18H, val) +#define bfin_read_CAN0_AM19L() bfin_read16(CAN0_AM19L) +#define bfin_write_CAN0_AM19L(val) bfin_write16(CAN0_AM19L, val) +#define bfin_read_CAN0_AM19H() bfin_read16(CAN0_AM19H) +#define bfin_write_CAN0_AM19H(val) bfin_write16(CAN0_AM19H, val) +#define bfin_read_CAN0_AM20L() bfin_read16(CAN0_AM20L) +#define bfin_write_CAN0_AM20L(val) bfin_write16(CAN0_AM20L, val) +#define bfin_read_CAN0_AM20H() bfin_read16(CAN0_AM20H) +#define bfin_write_CAN0_AM20H(val) bfin_write16(CAN0_AM20H, val) +#define bfin_read_CAN0_AM21L() bfin_read16(CAN0_AM21L) +#define bfin_write_CAN0_AM21L(val) bfin_write16(CAN0_AM21L, val) +#define bfin_read_CAN0_AM21H() bfin_read16(CAN0_AM21H) +#define bfin_write_CAN0_AM21H(val) bfin_write16(CAN0_AM21H, val) +#define bfin_read_CAN0_AM22L() bfin_read16(CAN0_AM22L) +#define bfin_write_CAN0_AM22L(val) bfin_write16(CAN0_AM22L, val) +#define bfin_read_CAN0_AM22H() bfin_read16(CAN0_AM22H) +#define bfin_write_CAN0_AM22H(val) bfin_write16(CAN0_AM22H, val) +#define bfin_read_CAN0_AM23L() bfin_read16(CAN0_AM23L) +#define bfin_write_CAN0_AM23L(val) bfin_write16(CAN0_AM23L, val) +#define bfin_read_CAN0_AM23H() bfin_read16(CAN0_AM23H) +#define bfin_write_CAN0_AM23H(val) bfin_write16(CAN0_AM23H, val) +#define bfin_read_CAN0_AM24L() bfin_read16(CAN0_AM24L) +#define bfin_write_CAN0_AM24L(val) bfin_write16(CAN0_AM24L, val) +#define bfin_read_CAN0_AM24H() bfin_read16(CAN0_AM24H) +#define bfin_write_CAN0_AM24H(val) bfin_write16(CAN0_AM24H, val) +#define bfin_read_CAN0_AM25L() bfin_read16(CAN0_AM25L) +#define bfin_write_CAN0_AM25L(val) bfin_write16(CAN0_AM25L, val) +#define bfin_read_CAN0_AM25H() bfin_read16(CAN0_AM25H) +#define bfin_write_CAN0_AM25H(val) bfin_write16(CAN0_AM25H, val) +#define bfin_read_CAN0_AM26L() bfin_read16(CAN0_AM26L) +#define bfin_write_CAN0_AM26L(val) bfin_write16(CAN0_AM26L, val) +#define bfin_read_CAN0_AM26H() bfin_read16(CAN0_AM26H) +#define bfin_write_CAN0_AM26H(val) bfin_write16(CAN0_AM26H, val) +#define bfin_read_CAN0_AM27L() bfin_read16(CAN0_AM27L) +#define bfin_write_CAN0_AM27L(val) bfin_write16(CAN0_AM27L, val) +#define bfin_read_CAN0_AM27H() bfin_read16(CAN0_AM27H) +#define bfin_write_CAN0_AM27H(val) bfin_write16(CAN0_AM27H, val) +#define bfin_read_CAN0_AM28L() bfin_read16(CAN0_AM28L) +#define bfin_write_CAN0_AM28L(val) bfin_write16(CAN0_AM28L, val) +#define bfin_read_CAN0_AM28H() bfin_read16(CAN0_AM28H) +#define bfin_write_CAN0_AM28H(val) bfin_write16(CAN0_AM28H, val) +#define bfin_read_CAN0_AM29L() bfin_read16(CAN0_AM29L) +#define bfin_write_CAN0_AM29L(val) bfin_write16(CAN0_AM29L, val) +#define bfin_read_CAN0_AM29H() bfin_read16(CAN0_AM29H) +#define bfin_write_CAN0_AM29H(val) bfin_write16(CAN0_AM29H, val) +#define bfin_read_CAN0_AM30L() bfin_read16(CAN0_AM30L) +#define bfin_write_CAN0_AM30L(val) bfin_write16(CAN0_AM30L, val) +#define bfin_read_CAN0_AM30H() bfin_read16(CAN0_AM30H) +#define bfin_write_CAN0_AM30H(val) bfin_write16(CAN0_AM30H, val) +#define bfin_read_CAN0_AM31L() bfin_read16(CAN0_AM31L) +#define bfin_write_CAN0_AM31L(val) bfin_write16(CAN0_AM31L, val) +#define bfin_read_CAN0_AM31H() bfin_read16(CAN0_AM31H) +#define bfin_write_CAN0_AM31H(val) bfin_write16(CAN0_AM31H, val) + +/* CAN Controller 0 Mailbox Data Registers */ + +#define bfin_read_CAN0_MB00_DATA0() bfin_read16(CAN0_MB00_DATA0) +#define bfin_write_CAN0_MB00_DATA0(val) bfin_write16(CAN0_MB00_DATA0, val) +#define bfin_read_CAN0_MB00_DATA1() bfin_read16(CAN0_MB00_DATA1) +#define bfin_write_CAN0_MB00_DATA1(val) bfin_write16(CAN0_MB00_DATA1, val) +#define bfin_read_CAN0_MB00_DATA2() bfin_read16(CAN0_MB00_DATA2) +#define bfin_write_CAN0_MB00_DATA2(val) bfin_write16(CAN0_MB00_DATA2, val) +#define bfin_read_CAN0_MB00_DATA3() bfin_read16(CAN0_MB00_DATA3) +#define bfin_write_CAN0_MB00_DATA3(val) bfin_write16(CAN0_MB00_DATA3, val) +#define bfin_read_CAN0_MB00_LENGTH() bfin_read16(CAN0_MB00_LENGTH) +#define bfin_write_CAN0_MB00_LENGTH(val) bfin_write16(CAN0_MB00_LENGTH, val) +#define bfin_read_CAN0_MB00_TIMESTAMP() bfin_read16(CAN0_MB00_TIMESTAMP) +#define bfin_write_CAN0_MB00_TIMESTAMP(val) bfin_write16(CAN0_MB00_TIMESTAMP, val) +#define bfin_read_CAN0_MB00_ID0() bfin_read16(CAN0_MB00_ID0) +#define bfin_write_CAN0_MB00_ID0(val) bfin_write16(CAN0_MB00_ID0, val) +#define bfin_read_CAN0_MB00_ID1() bfin_read16(CAN0_MB00_ID1) +#define bfin_write_CAN0_MB00_ID1(val) bfin_write16(CAN0_MB00_ID1, val) +#define bfin_read_CAN0_MB01_DATA0() bfin_read16(CAN0_MB01_DATA0) +#define bfin_write_CAN0_MB01_DATA0(val) bfin_write16(CAN0_MB01_DATA0, val) +#define bfin_read_CAN0_MB01_DATA1() bfin_read16(CAN0_MB01_DATA1) +#define bfin_write_CAN0_MB01_DATA1(val) bfin_write16(CAN0_MB01_DATA1, val) +#define bfin_read_CAN0_MB01_DATA2() bfin_read16(CAN0_MB01_DATA2) +#define bfin_write_CAN0_MB01_DATA2(val) bfin_write16(CAN0_MB01_DATA2, val) +#define bfin_read_CAN0_MB01_DATA3() bfin_read16(CAN0_MB01_DATA3) +#define bfin_write_CAN0_MB01_DATA3(val) bfin_write16(CAN0_MB01_DATA3, val) +#define bfin_read_CAN0_MB01_LENGTH() bfin_read16(CAN0_MB01_LENGTH) +#define bfin_write_CAN0_MB01_LENGTH(val) bfin_write16(CAN0_MB01_LENGTH, val) +#define bfin_read_CAN0_MB01_TIMESTAMP() bfin_read16(CAN0_MB01_TIMESTAMP) +#define bfin_write_CAN0_MB01_TIMESTAMP(val) bfin_write16(CAN0_MB01_TIMESTAMP, val) +#define bfin_read_CAN0_MB01_ID0() bfin_read16(CAN0_MB01_ID0) +#define bfin_write_CAN0_MB01_ID0(val) bfin_write16(CAN0_MB01_ID0, val) +#define bfin_read_CAN0_MB01_ID1() bfin_read16(CAN0_MB01_ID1) +#define bfin_write_CAN0_MB01_ID1(val) bfin_write16(CAN0_MB01_ID1, val) +#define bfin_read_CAN0_MB02_DATA0() bfin_read16(CAN0_MB02_DATA0) +#define bfin_write_CAN0_MB02_DATA0(val) bfin_write16(CAN0_MB02_DATA0, val) +#define bfin_read_CAN0_MB02_DATA1() bfin_read16(CAN0_MB02_DATA1) +#define bfin_write_CAN0_MB02_DATA1(val) bfin_write16(CAN0_MB02_DATA1, val) +#define bfin_read_CAN0_MB02_DATA2() bfin_read16(CAN0_MB02_DATA2) +#define bfin_write_CAN0_MB02_DATA2(val) bfin_write16(CAN0_MB02_DATA2, val) +#define bfin_read_CAN0_MB02_DATA3() bfin_read16(CAN0_MB02_DATA3) +#define bfin_write_CAN0_MB02_DATA3(val) bfin_write16(CAN0_MB02_DATA3, val) +#define bfin_read_CAN0_MB02_LENGTH() bfin_read16(CAN0_MB02_LENGTH) +#define bfin_write_CAN0_MB02_LENGTH(val) bfin_write16(CAN0_MB02_LENGTH, val) +#define bfin_read_CAN0_MB02_TIMESTAMP() bfin_read16(CAN0_MB02_TIMESTAMP) +#define bfin_write_CAN0_MB02_TIMESTAMP(val) bfin_write16(CAN0_MB02_TIMESTAMP, val) +#define bfin_read_CAN0_MB02_ID0() bfin_read16(CAN0_MB02_ID0) +#define bfin_write_CAN0_MB02_ID0(val) bfin_write16(CAN0_MB02_ID0, val) +#define bfin_read_CAN0_MB02_ID1() bfin_read16(CAN0_MB02_ID1) +#define bfin_write_CAN0_MB02_ID1(val) bfin_write16(CAN0_MB02_ID1, val) +#define bfin_read_CAN0_MB03_DATA0() bfin_read16(CAN0_MB03_DATA0) +#define bfin_write_CAN0_MB03_DATA0(val) bfin_write16(CAN0_MB03_DATA0, val) +#define bfin_read_CAN0_MB03_DATA1() bfin_read16(CAN0_MB03_DATA1) +#define bfin_write_CAN0_MB03_DATA1(val) bfin_write16(CAN0_MB03_DATA1, val) +#define bfin_read_CAN0_MB03_DATA2() bfin_read16(CAN0_MB03_DATA2) +#define bfin_write_CAN0_MB03_DATA2(val) bfin_write16(CAN0_MB03_DATA2, val) +#define bfin_read_CAN0_MB03_DATA3() bfin_read16(CAN0_MB03_DATA3) +#define bfin_write_CAN0_MB03_DATA3(val) bfin_write16(CAN0_MB03_DATA3, val) +#define bfin_read_CAN0_MB03_LENGTH() bfin_read16(CAN0_MB03_LENGTH) +#define bfin_write_CAN0_MB03_LENGTH(val) bfin_write16(CAN0_MB03_LENGTH, val) +#define bfin_read_CAN0_MB03_TIMESTAMP() bfin_read16(CAN0_MB03_TIMESTAMP) +#define bfin_write_CAN0_MB03_TIMESTAMP(val) bfin_write16(CAN0_MB03_TIMESTAMP, val) +#define bfin_read_CAN0_MB03_ID0() bfin_read16(CAN0_MB03_ID0) +#define bfin_write_CAN0_MB03_ID0(val) bfin_write16(CAN0_MB03_ID0, val) +#define bfin_read_CAN0_MB03_ID1() bfin_read16(CAN0_MB03_ID1) +#define bfin_write_CAN0_MB03_ID1(val) bfin_write16(CAN0_MB03_ID1, val) +#define bfin_read_CAN0_MB04_DATA0() bfin_read16(CAN0_MB04_DATA0) +#define bfin_write_CAN0_MB04_DATA0(val) bfin_write16(CAN0_MB04_DATA0, val) +#define bfin_read_CAN0_MB04_DATA1() bfin_read16(CAN0_MB04_DATA1) +#define bfin_write_CAN0_MB04_DATA1(val) bfin_write16(CAN0_MB04_DATA1, val) +#define bfin_read_CAN0_MB04_DATA2() bfin_read16(CAN0_MB04_DATA2) +#define bfin_write_CAN0_MB04_DATA2(val) bfin_write16(CAN0_MB04_DATA2, val) +#define bfin_read_CAN0_MB04_DATA3() bfin_read16(CAN0_MB04_DATA3) +#define bfin_write_CAN0_MB04_DATA3(val) bfin_write16(CAN0_MB04_DATA3, val) +#define bfin_read_CAN0_MB04_LENGTH() bfin_read16(CAN0_MB04_LENGTH) +#define bfin_write_CAN0_MB04_LENGTH(val) bfin_write16(CAN0_MB04_LENGTH, val) +#define bfin_read_CAN0_MB04_TIMESTAMP() bfin_read16(CAN0_MB04_TIMESTAMP) +#define bfin_write_CAN0_MB04_TIMESTAMP(val) bfin_write16(CAN0_MB04_TIMESTAMP, val) +#define bfin_read_CAN0_MB04_ID0() bfin_read16(CAN0_MB04_ID0) +#define bfin_write_CAN0_MB04_ID0(val) bfin_write16(CAN0_MB04_ID0, val) +#define bfin_read_CAN0_MB04_ID1() bfin_read16(CAN0_MB04_ID1) +#define bfin_write_CAN0_MB04_ID1(val) bfin_write16(CAN0_MB04_ID1, val) +#define bfin_read_CAN0_MB05_DATA0() bfin_read16(CAN0_MB05_DATA0) +#define bfin_write_CAN0_MB05_DATA0(val) bfin_write16(CAN0_MB05_DATA0, val) +#define bfin_read_CAN0_MB05_DATA1() bfin_read16(CAN0_MB05_DATA1) +#define bfin_write_CAN0_MB05_DATA1(val) bfin_write16(CAN0_MB05_DATA1, val) +#define bfin_read_CAN0_MB05_DATA2() bfin_read16(CAN0_MB05_DATA2) +#define bfin_write_CAN0_MB05_DATA2(val) bfin_write16(CAN0_MB05_DATA2, val) +#define bfin_read_CAN0_MB05_DATA3() bfin_read16(CAN0_MB05_DATA3) +#define bfin_write_CAN0_MB05_DATA3(val) bfin_write16(CAN0_MB05_DATA3, val) +#define bfin_read_CAN0_MB05_LENGTH() bfin_read16(CAN0_MB05_LENGTH) +#define bfin_write_CAN0_MB05_LENGTH(val) bfin_write16(CAN0_MB05_LENGTH, val) +#define bfin_read_CAN0_MB05_TIMESTAMP() bfin_read16(CAN0_MB05_TIMESTAMP) +#define bfin_write_CAN0_MB05_TIMESTAMP(val) bfin_write16(CAN0_MB05_TIMESTAMP, val) +#define bfin_read_CAN0_MB05_ID0() bfin_read16(CAN0_MB05_ID0) +#define bfin_write_CAN0_MB05_ID0(val) bfin_write16(CAN0_MB05_ID0, val) +#define bfin_read_CAN0_MB05_ID1() bfin_read16(CAN0_MB05_ID1) +#define bfin_write_CAN0_MB05_ID1(val) bfin_write16(CAN0_MB05_ID1, val) +#define bfin_read_CAN0_MB06_DATA0() bfin_read16(CAN0_MB06_DATA0) +#define bfin_write_CAN0_MB06_DATA0(val) bfin_write16(CAN0_MB06_DATA0, val) +#define bfin_read_CAN0_MB06_DATA1() bfin_read16(CAN0_MB06_DATA1) +#define bfin_write_CAN0_MB06_DATA1(val) bfin_write16(CAN0_MB06_DATA1, val) +#define bfin_read_CAN0_MB06_DATA2() bfin_read16(CAN0_MB06_DATA2) +#define bfin_write_CAN0_MB06_DATA2(val) bfin_write16(CAN0_MB06_DATA2, val) +#define bfin_read_CAN0_MB06_DATA3() bfin_read16(CAN0_MB06_DATA3) +#define bfin_write_CAN0_MB06_DATA3(val) bfin_write16(CAN0_MB06_DATA3, val) +#define bfin_read_CAN0_MB06_LENGTH() bfin_read16(CAN0_MB06_LENGTH) +#define bfin_write_CAN0_MB06_LENGTH(val) bfin_write16(CAN0_MB06_LENGTH, val) +#define bfin_read_CAN0_MB06_TIMESTAMP() bfin_read16(CAN0_MB06_TIMESTAMP) +#define bfin_write_CAN0_MB06_TIMESTAMP(val) bfin_write16(CAN0_MB06_TIMESTAMP, val) +#define bfin_read_CAN0_MB06_ID0() bfin_read16(CAN0_MB06_ID0) +#define bfin_write_CAN0_MB06_ID0(val) bfin_write16(CAN0_MB06_ID0, val) +#define bfin_read_CAN0_MB06_ID1() bfin_read16(CAN0_MB06_ID1) +#define bfin_write_CAN0_MB06_ID1(val) bfin_write16(CAN0_MB06_ID1, val) +#define bfin_read_CAN0_MB07_DATA0() bfin_read16(CAN0_MB07_DATA0) +#define bfin_write_CAN0_MB07_DATA0(val) bfin_write16(CAN0_MB07_DATA0, val) +#define bfin_read_CAN0_MB07_DATA1() bfin_read16(CAN0_MB07_DATA1) +#define bfin_write_CAN0_MB07_DATA1(val) bfin_write16(CAN0_MB07_DATA1, val) +#define bfin_read_CAN0_MB07_DATA2() bfin_read16(CAN0_MB07_DATA2) +#define bfin_write_CAN0_MB07_DATA2(val) bfin_write16(CAN0_MB07_DATA2, val) +#define bfin_read_CAN0_MB07_DATA3() bfin_read16(CAN0_MB07_DATA3) +#define bfin_write_CAN0_MB07_DATA3(val) bfin_write16(CAN0_MB07_DATA3, val) +#define bfin_read_CAN0_MB07_LENGTH() bfin_read16(CAN0_MB07_LENGTH) +#define bfin_write_CAN0_MB07_LENGTH(val) bfin_write16(CAN0_MB07_LENGTH, val) +#define bfin_read_CAN0_MB07_TIMESTAMP() bfin_read16(CAN0_MB07_TIMESTAMP) +#define bfin_write_CAN0_MB07_TIMESTAMP(val) bfin_write16(CAN0_MB07_TIMESTAMP, val) +#define bfin_read_CAN0_MB07_ID0() bfin_read16(CAN0_MB07_ID0) +#define bfin_write_CAN0_MB07_ID0(val) bfin_write16(CAN0_MB07_ID0, val) +#define bfin_read_CAN0_MB07_ID1() bfin_read16(CAN0_MB07_ID1) +#define bfin_write_CAN0_MB07_ID1(val) bfin_write16(CAN0_MB07_ID1, val) +#define bfin_read_CAN0_MB08_DATA0() bfin_read16(CAN0_MB08_DATA0) +#define bfin_write_CAN0_MB08_DATA0(val) bfin_write16(CAN0_MB08_DATA0, val) +#define bfin_read_CAN0_MB08_DATA1() bfin_read16(CAN0_MB08_DATA1) +#define bfin_write_CAN0_MB08_DATA1(val) bfin_write16(CAN0_MB08_DATA1, val) +#define bfin_read_CAN0_MB08_DATA2() bfin_read16(CAN0_MB08_DATA2) +#define bfin_write_CAN0_MB08_DATA2(val) bfin_write16(CAN0_MB08_DATA2, val) +#define bfin_read_CAN0_MB08_DATA3() bfin_read16(CAN0_MB08_DATA3) +#define bfin_write_CAN0_MB08_DATA3(val) bfin_write16(CAN0_MB08_DATA3, val) +#define bfin_read_CAN0_MB08_LENGTH() bfin_read16(CAN0_MB08_LENGTH) +#define bfin_write_CAN0_MB08_LENGTH(val) bfin_write16(CAN0_MB08_LENGTH, val) +#define bfin_read_CAN0_MB08_TIMESTAMP() bfin_read16(CAN0_MB08_TIMESTAMP) +#define bfin_write_CAN0_MB08_TIMESTAMP(val) bfin_write16(CAN0_MB08_TIMESTAMP, val) +#define bfin_read_CAN0_MB08_ID0() bfin_read16(CAN0_MB08_ID0) +#define bfin_write_CAN0_MB08_ID0(val) bfin_write16(CAN0_MB08_ID0, val) +#define bfin_read_CAN0_MB08_ID1() bfin_read16(CAN0_MB08_ID1) +#define bfin_write_CAN0_MB08_ID1(val) bfin_write16(CAN0_MB08_ID1, val) +#define bfin_read_CAN0_MB09_DATA0() bfin_read16(CAN0_MB09_DATA0) +#define bfin_write_CAN0_MB09_DATA0(val) bfin_write16(CAN0_MB09_DATA0, val) +#define bfin_read_CAN0_MB09_DATA1() bfin_read16(CAN0_MB09_DATA1) +#define bfin_write_CAN0_MB09_DATA1(val) bfin_write16(CAN0_MB09_DATA1, val) +#define bfin_read_CAN0_MB09_DATA2() bfin_read16(CAN0_MB09_DATA2) +#define bfin_write_CAN0_MB09_DATA2(val) bfin_write16(CAN0_MB09_DATA2, val) +#define bfin_read_CAN0_MB09_DATA3() bfin_read16(CAN0_MB09_DATA3) +#define bfin_write_CAN0_MB09_DATA3(val) bfin_write16(CAN0_MB09_DATA3, val) +#define bfin_read_CAN0_MB09_LENGTH() bfin_read16(CAN0_MB09_LENGTH) +#define bfin_write_CAN0_MB09_LENGTH(val) bfin_write16(CAN0_MB09_LENGTH, val) +#define bfin_read_CAN0_MB09_TIMESTAMP() bfin_read16(CAN0_MB09_TIMESTAMP) +#define bfin_write_CAN0_MB09_TIMESTAMP(val) bfin_write16(CAN0_MB09_TIMESTAMP, val) +#define bfin_read_CAN0_MB09_ID0() bfin_read16(CAN0_MB09_ID0) +#define bfin_write_CAN0_MB09_ID0(val) bfin_write16(CAN0_MB09_ID0, val) +#define bfin_read_CAN0_MB09_ID1() bfin_read16(CAN0_MB09_ID1) +#define bfin_write_CAN0_MB09_ID1(val) bfin_write16(CAN0_MB09_ID1, val) +#define bfin_read_CAN0_MB10_DATA0() bfin_read16(CAN0_MB10_DATA0) +#define bfin_write_CAN0_MB10_DATA0(val) bfin_write16(CAN0_MB10_DATA0, val) +#define bfin_read_CAN0_MB10_DATA1() bfin_read16(CAN0_MB10_DATA1) +#define bfin_write_CAN0_MB10_DATA1(val) bfin_write16(CAN0_MB10_DATA1, val) +#define bfin_read_CAN0_MB10_DATA2() bfin_read16(CAN0_MB10_DATA2) +#define bfin_write_CAN0_MB10_DATA2(val) bfin_write16(CAN0_MB10_DATA2, val) +#define bfin_read_CAN0_MB10_DATA3() bfin_read16(CAN0_MB10_DATA3) +#define bfin_write_CAN0_MB10_DATA3(val) bfin_write16(CAN0_MB10_DATA3, val) +#define bfin_read_CAN0_MB10_LENGTH() bfin_read16(CAN0_MB10_LENGTH) +#define bfin_write_CAN0_MB10_LENGTH(val) bfin_write16(CAN0_MB10_LENGTH, val) +#define bfin_read_CAN0_MB10_TIMESTAMP() bfin_read16(CAN0_MB10_TIMESTAMP) +#define bfin_write_CAN0_MB10_TIMESTAMP(val) bfin_write16(CAN0_MB10_TIMESTAMP, val) +#define bfin_read_CAN0_MB10_ID0() bfin_read16(CAN0_MB10_ID0) +#define bfin_write_CAN0_MB10_ID0(val) bfin_write16(CAN0_MB10_ID0, val) +#define bfin_read_CAN0_MB10_ID1() bfin_read16(CAN0_MB10_ID1) +#define bfin_write_CAN0_MB10_ID1(val) bfin_write16(CAN0_MB10_ID1, val) +#define bfin_read_CAN0_MB11_DATA0() bfin_read16(CAN0_MB11_DATA0) +#define bfin_write_CAN0_MB11_DATA0(val) bfin_write16(CAN0_MB11_DATA0, val) +#define bfin_read_CAN0_MB11_DATA1() bfin_read16(CAN0_MB11_DATA1) +#define bfin_write_CAN0_MB11_DATA1(val) bfin_write16(CAN0_MB11_DATA1, val) +#define bfin_read_CAN0_MB11_DATA2() bfin_read16(CAN0_MB11_DATA2) +#define bfin_write_CAN0_MB11_DATA2(val) bfin_write16(CAN0_MB11_DATA2, val) +#define bfin_read_CAN0_MB11_DATA3() bfin_read16(CAN0_MB11_DATA3) +#define bfin_write_CAN0_MB11_DATA3(val) bfin_write16(CAN0_MB11_DATA3, val) +#define bfin_read_CAN0_MB11_LENGTH() bfin_read16(CAN0_MB11_LENGTH) +#define bfin_write_CAN0_MB11_LENGTH(val) bfin_write16(CAN0_MB11_LENGTH, val) +#define bfin_read_CAN0_MB11_TIMESTAMP() bfin_read16(CAN0_MB11_TIMESTAMP) +#define bfin_write_CAN0_MB11_TIMESTAMP(val) bfin_write16(CAN0_MB11_TIMESTAMP, val) +#define bfin_read_CAN0_MB11_ID0() bfin_read16(CAN0_MB11_ID0) +#define bfin_write_CAN0_MB11_ID0(val) bfin_write16(CAN0_MB11_ID0, val) +#define bfin_read_CAN0_MB11_ID1() bfin_read16(CAN0_MB11_ID1) +#define bfin_write_CAN0_MB11_ID1(val) bfin_write16(CAN0_MB11_ID1, val) +#define bfin_read_CAN0_MB12_DATA0() bfin_read16(CAN0_MB12_DATA0) +#define bfin_write_CAN0_MB12_DATA0(val) bfin_write16(CAN0_MB12_DATA0, val) +#define bfin_read_CAN0_MB12_DATA1() bfin_read16(CAN0_MB12_DATA1) +#define bfin_write_CAN0_MB12_DATA1(val) bfin_write16(CAN0_MB12_DATA1, val) +#define bfin_read_CAN0_MB12_DATA2() bfin_read16(CAN0_MB12_DATA2) +#define bfin_write_CAN0_MB12_DATA2(val) bfin_write16(CAN0_MB12_DATA2, val) +#define bfin_read_CAN0_MB12_DATA3() bfin_read16(CAN0_MB12_DATA3) +#define bfin_write_CAN0_MB12_DATA3(val) bfin_write16(CAN0_MB12_DATA3, val) +#define bfin_read_CAN0_MB12_LENGTH() bfin_read16(CAN0_MB12_LENGTH) +#define bfin_write_CAN0_MB12_LENGTH(val) bfin_write16(CAN0_MB12_LENGTH, val) +#define bfin_read_CAN0_MB12_TIMESTAMP() bfin_read16(CAN0_MB12_TIMESTAMP) +#define bfin_write_CAN0_MB12_TIMESTAMP(val) bfin_write16(CAN0_MB12_TIMESTAMP, val) +#define bfin_read_CAN0_MB12_ID0() bfin_read16(CAN0_MB12_ID0) +#define bfin_write_CAN0_MB12_ID0(val) bfin_write16(CAN0_MB12_ID0, val) +#define bfin_read_CAN0_MB12_ID1() bfin_read16(CAN0_MB12_ID1) +#define bfin_write_CAN0_MB12_ID1(val) bfin_write16(CAN0_MB12_ID1, val) +#define bfin_read_CAN0_MB13_DATA0() bfin_read16(CAN0_MB13_DATA0) +#define bfin_write_CAN0_MB13_DATA0(val) bfin_write16(CAN0_MB13_DATA0, val) +#define bfin_read_CAN0_MB13_DATA1() bfin_read16(CAN0_MB13_DATA1) +#define bfin_write_CAN0_MB13_DATA1(val) bfin_write16(CAN0_MB13_DATA1, val) +#define bfin_read_CAN0_MB13_DATA2() bfin_read16(CAN0_MB13_DATA2) +#define bfin_write_CAN0_MB13_DATA2(val) bfin_write16(CAN0_MB13_DATA2, val) +#define bfin_read_CAN0_MB13_DATA3() bfin_read16(CAN0_MB13_DATA3) +#define bfin_write_CAN0_MB13_DATA3(val) bfin_write16(CAN0_MB13_DATA3, val) +#define bfin_read_CAN0_MB13_LENGTH() bfin_read16(CAN0_MB13_LENGTH) +#define bfin_write_CAN0_MB13_LENGTH(val) bfin_write16(CAN0_MB13_LENGTH, val) +#define bfin_read_CAN0_MB13_TIMESTAMP() bfin_read16(CAN0_MB13_TIMESTAMP) +#define bfin_write_CAN0_MB13_TIMESTAMP(val) bfin_write16(CAN0_MB13_TIMESTAMP, val) +#define bfin_read_CAN0_MB13_ID0() bfin_read16(CAN0_MB13_ID0) +#define bfin_write_CAN0_MB13_ID0(val) bfin_write16(CAN0_MB13_ID0, val) +#define bfin_read_CAN0_MB13_ID1() bfin_read16(CAN0_MB13_ID1) +#define bfin_write_CAN0_MB13_ID1(val) bfin_write16(CAN0_MB13_ID1, val) +#define bfin_read_CAN0_MB14_DATA0() bfin_read16(CAN0_MB14_DATA0) +#define bfin_write_CAN0_MB14_DATA0(val) bfin_write16(CAN0_MB14_DATA0, val) +#define bfin_read_CAN0_MB14_DATA1() bfin_read16(CAN0_MB14_DATA1) +#define bfin_write_CAN0_MB14_DATA1(val) bfin_write16(CAN0_MB14_DATA1, val) +#define bfin_read_CAN0_MB14_DATA2() bfin_read16(CAN0_MB14_DATA2) +#define bfin_write_CAN0_MB14_DATA2(val) bfin_write16(CAN0_MB14_DATA2, val) +#define bfin_read_CAN0_MB14_DATA3() bfin_read16(CAN0_MB14_DATA3) +#define bfin_write_CAN0_MB14_DATA3(val) bfin_write16(CAN0_MB14_DATA3, val) +#define bfin_read_CAN0_MB14_LENGTH() bfin_read16(CAN0_MB14_LENGTH) +#define bfin_write_CAN0_MB14_LENGTH(val) bfin_write16(CAN0_MB14_LENGTH, val) +#define bfin_read_CAN0_MB14_TIMESTAMP() bfin_read16(CAN0_MB14_TIMESTAMP) +#define bfin_write_CAN0_MB14_TIMESTAMP(val) bfin_write16(CAN0_MB14_TIMESTAMP, val) +#define bfin_read_CAN0_MB14_ID0() bfin_read16(CAN0_MB14_ID0) +#define bfin_write_CAN0_MB14_ID0(val) bfin_write16(CAN0_MB14_ID0, val) +#define bfin_read_CAN0_MB14_ID1() bfin_read16(CAN0_MB14_ID1) +#define bfin_write_CAN0_MB14_ID1(val) bfin_write16(CAN0_MB14_ID1, val) +#define bfin_read_CAN0_MB15_DATA0() bfin_read16(CAN0_MB15_DATA0) +#define bfin_write_CAN0_MB15_DATA0(val) bfin_write16(CAN0_MB15_DATA0, val) +#define bfin_read_CAN0_MB15_DATA1() bfin_read16(CAN0_MB15_DATA1) +#define bfin_write_CAN0_MB15_DATA1(val) bfin_write16(CAN0_MB15_DATA1, val) +#define bfin_read_CAN0_MB15_DATA2() bfin_read16(CAN0_MB15_DATA2) +#define bfin_write_CAN0_MB15_DATA2(val) bfin_write16(CAN0_MB15_DATA2, val) +#define bfin_read_CAN0_MB15_DATA3() bfin_read16(CAN0_MB15_DATA3) +#define bfin_write_CAN0_MB15_DATA3(val) bfin_write16(CAN0_MB15_DATA3, val) +#define bfin_read_CAN0_MB15_LENGTH() bfin_read16(CAN0_MB15_LENGTH) +#define bfin_write_CAN0_MB15_LENGTH(val) bfin_write16(CAN0_MB15_LENGTH, val) +#define bfin_read_CAN0_MB15_TIMESTAMP() bfin_read16(CAN0_MB15_TIMESTAMP) +#define bfin_write_CAN0_MB15_TIMESTAMP(val) bfin_write16(CAN0_MB15_TIMESTAMP, val) +#define bfin_read_CAN0_MB15_ID0() bfin_read16(CAN0_MB15_ID0) +#define bfin_write_CAN0_MB15_ID0(val) bfin_write16(CAN0_MB15_ID0, val) +#define bfin_read_CAN0_MB15_ID1() bfin_read16(CAN0_MB15_ID1) +#define bfin_write_CAN0_MB15_ID1(val) bfin_write16(CAN0_MB15_ID1, val) + +/* CAN Controller 0 Mailbox Data Registers */ + +#define bfin_read_CAN0_MB16_DATA0() bfin_read16(CAN0_MB16_DATA0) +#define bfin_write_CAN0_MB16_DATA0(val) bfin_write16(CAN0_MB16_DATA0, val) +#define bfin_read_CAN0_MB16_DATA1() bfin_read16(CAN0_MB16_DATA1) +#define bfin_write_CAN0_MB16_DATA1(val) bfin_write16(CAN0_MB16_DATA1, val) +#define bfin_read_CAN0_MB16_DATA2() bfin_read16(CAN0_MB16_DATA2) +#define bfin_write_CAN0_MB16_DATA2(val) bfin_write16(CAN0_MB16_DATA2, val) +#define bfin_read_CAN0_MB16_DATA3() bfin_read16(CAN0_MB16_DATA3) +#define bfin_write_CAN0_MB16_DATA3(val) bfin_write16(CAN0_MB16_DATA3, val) +#define bfin_read_CAN0_MB16_LENGTH() bfin_read16(CAN0_MB16_LENGTH) +#define bfin_write_CAN0_MB16_LENGTH(val) bfin_write16(CAN0_MB16_LENGTH, val) +#define bfin_read_CAN0_MB16_TIMESTAMP() bfin_read16(CAN0_MB16_TIMESTAMP) +#define bfin_write_CAN0_MB16_TIMESTAMP(val) bfin_write16(CAN0_MB16_TIMESTAMP, val) +#define bfin_read_CAN0_MB16_ID0() bfin_read16(CAN0_MB16_ID0) +#define bfin_write_CAN0_MB16_ID0(val) bfin_write16(CAN0_MB16_ID0, val) +#define bfin_read_CAN0_MB16_ID1() bfin_read16(CAN0_MB16_ID1) +#define bfin_write_CAN0_MB16_ID1(val) bfin_write16(CAN0_MB16_ID1, val) +#define bfin_read_CAN0_MB17_DATA0() bfin_read16(CAN0_MB17_DATA0) +#define bfin_write_CAN0_MB17_DATA0(val) bfin_write16(CAN0_MB17_DATA0, val) +#define bfin_read_CAN0_MB17_DATA1() bfin_read16(CAN0_MB17_DATA1) +#define bfin_write_CAN0_MB17_DATA1(val) bfin_write16(CAN0_MB17_DATA1, val) +#define bfin_read_CAN0_MB17_DATA2() bfin_read16(CAN0_MB17_DATA2) +#define bfin_write_CAN0_MB17_DATA2(val) bfin_write16(CAN0_MB17_DATA2, val) +#define bfin_read_CAN0_MB17_DATA3() bfin_read16(CAN0_MB17_DATA3) +#define bfin_write_CAN0_MB17_DATA3(val) bfin_write16(CAN0_MB17_DATA3, val) +#define bfin_read_CAN0_MB17_LENGTH() bfin_read16(CAN0_MB17_LENGTH) +#define bfin_write_CAN0_MB17_LENGTH(val) bfin_write16(CAN0_MB17_LENGTH, val) +#define bfin_read_CAN0_MB17_TIMESTAMP() bfin_read16(CAN0_MB17_TIMESTAMP) +#define bfin_write_CAN0_MB17_TIMESTAMP(val) bfin_write16(CAN0_MB17_TIMESTAMP, val) +#define bfin_read_CAN0_MB17_ID0() bfin_read16(CAN0_MB17_ID0) +#define bfin_write_CAN0_MB17_ID0(val) bfin_write16(CAN0_MB17_ID0, val) +#define bfin_read_CAN0_MB17_ID1() bfin_read16(CAN0_MB17_ID1) +#define bfin_write_CAN0_MB17_ID1(val) bfin_write16(CAN0_MB17_ID1, val) +#define bfin_read_CAN0_MB18_DATA0() bfin_read16(CAN0_MB18_DATA0) +#define bfin_write_CAN0_MB18_DATA0(val) bfin_write16(CAN0_MB18_DATA0, val) +#define bfin_read_CAN0_MB18_DATA1() bfin_read16(CAN0_MB18_DATA1) +#define bfin_write_CAN0_MB18_DATA1(val) bfin_write16(CAN0_MB18_DATA1, val) +#define bfin_read_CAN0_MB18_DATA2() bfin_read16(CAN0_MB18_DATA2) +#define bfin_write_CAN0_MB18_DATA2(val) bfin_write16(CAN0_MB18_DATA2, val) +#define bfin_read_CAN0_MB18_DATA3() bfin_read16(CAN0_MB18_DATA3) +#define bfin_write_CAN0_MB18_DATA3(val) bfin_write16(CAN0_MB18_DATA3, val) +#define bfin_read_CAN0_MB18_LENGTH() bfin_read16(CAN0_MB18_LENGTH) +#define bfin_write_CAN0_MB18_LENGTH(val) bfin_write16(CAN0_MB18_LENGTH, val) +#define bfin_read_CAN0_MB18_TIMESTAMP() bfin_read16(CAN0_MB18_TIMESTAMP) +#define bfin_write_CAN0_MB18_TIMESTAMP(val) bfin_write16(CAN0_MB18_TIMESTAMP, val) +#define bfin_read_CAN0_MB18_ID0() bfin_read16(CAN0_MB18_ID0) +#define bfin_write_CAN0_MB18_ID0(val) bfin_write16(CAN0_MB18_ID0, val) +#define bfin_read_CAN0_MB18_ID1() bfin_read16(CAN0_MB18_ID1) +#define bfin_write_CAN0_MB18_ID1(val) bfin_write16(CAN0_MB18_ID1, val) +#define bfin_read_CAN0_MB19_DATA0() bfin_read16(CAN0_MB19_DATA0) +#define bfin_write_CAN0_MB19_DATA0(val) bfin_write16(CAN0_MB19_DATA0, val) +#define bfin_read_CAN0_MB19_DATA1() bfin_read16(CAN0_MB19_DATA1) +#define bfin_write_CAN0_MB19_DATA1(val) bfin_write16(CAN0_MB19_DATA1, val) +#define bfin_read_CAN0_MB19_DATA2() bfin_read16(CAN0_MB19_DATA2) +#define bfin_write_CAN0_MB19_DATA2(val) bfin_write16(CAN0_MB19_DATA2, val) +#define bfin_read_CAN0_MB19_DATA3() bfin_read16(CAN0_MB19_DATA3) +#define bfin_write_CAN0_MB19_DATA3(val) bfin_write16(CAN0_MB19_DATA3, val) +#define bfin_read_CAN0_MB19_LENGTH() bfin_read16(CAN0_MB19_LENGTH) +#define bfin_write_CAN0_MB19_LENGTH(val) bfin_write16(CAN0_MB19_LENGTH, val) +#define bfin_read_CAN0_MB19_TIMESTAMP() bfin_read16(CAN0_MB19_TIMESTAMP) +#define bfin_write_CAN0_MB19_TIMESTAMP(val) bfin_write16(CAN0_MB19_TIMESTAMP, val) +#define bfin_read_CAN0_MB19_ID0() bfin_read16(CAN0_MB19_ID0) +#define bfin_write_CAN0_MB19_ID0(val) bfin_write16(CAN0_MB19_ID0, val) +#define bfin_read_CAN0_MB19_ID1() bfin_read16(CAN0_MB19_ID1) +#define bfin_write_CAN0_MB19_ID1(val) bfin_write16(CAN0_MB19_ID1, val) +#define bfin_read_CAN0_MB20_DATA0() bfin_read16(CAN0_MB20_DATA0) +#define bfin_write_CAN0_MB20_DATA0(val) bfin_write16(CAN0_MB20_DATA0, val) +#define bfin_read_CAN0_MB20_DATA1() bfin_read16(CAN0_MB20_DATA1) +#define bfin_write_CAN0_MB20_DATA1(val) bfin_write16(CAN0_MB20_DATA1, val) +#define bfin_read_CAN0_MB20_DATA2() bfin_read16(CAN0_MB20_DATA2) +#define bfin_write_CAN0_MB20_DATA2(val) bfin_write16(CAN0_MB20_DATA2, val) +#define bfin_read_CAN0_MB20_DATA3() bfin_read16(CAN0_MB20_DATA3) +#define bfin_write_CAN0_MB20_DATA3(val) bfin_write16(CAN0_MB20_DATA3, val) +#define bfin_read_CAN0_MB20_LENGTH() bfin_read16(CAN0_MB20_LENGTH) +#define bfin_write_CAN0_MB20_LENGTH(val) bfin_write16(CAN0_MB20_LENGTH, val) +#define bfin_read_CAN0_MB20_TIMESTAMP() bfin_read16(CAN0_MB20_TIMESTAMP) +#define bfin_write_CAN0_MB20_TIMESTAMP(val) bfin_write16(CAN0_MB20_TIMESTAMP, val) +#define bfin_read_CAN0_MB20_ID0() bfin_read16(CAN0_MB20_ID0) +#define bfin_write_CAN0_MB20_ID0(val) bfin_write16(CAN0_MB20_ID0, val) +#define bfin_read_CAN0_MB20_ID1() bfin_read16(CAN0_MB20_ID1) +#define bfin_write_CAN0_MB20_ID1(val) bfin_write16(CAN0_MB20_ID1, val) +#define bfin_read_CAN0_MB21_DATA0() bfin_read16(CAN0_MB21_DATA0) +#define bfin_write_CAN0_MB21_DATA0(val) bfin_write16(CAN0_MB21_DATA0, val) +#define bfin_read_CAN0_MB21_DATA1() bfin_read16(CAN0_MB21_DATA1) +#define bfin_write_CAN0_MB21_DATA1(val) bfin_write16(CAN0_MB21_DATA1, val) +#define bfin_read_CAN0_MB21_DATA2() bfin_read16(CAN0_MB21_DATA2) +#define bfin_write_CAN0_MB21_DATA2(val) bfin_write16(CAN0_MB21_DATA2, val) +#define bfin_read_CAN0_MB21_DATA3() bfin_read16(CAN0_MB21_DATA3) +#define bfin_write_CAN0_MB21_DATA3(val) bfin_write16(CAN0_MB21_DATA3, val) +#define bfin_read_CAN0_MB21_LENGTH() bfin_read16(CAN0_MB21_LENGTH) +#define bfin_write_CAN0_MB21_LENGTH(val) bfin_write16(CAN0_MB21_LENGTH, val) +#define bfin_read_CAN0_MB21_TIMESTAMP() bfin_read16(CAN0_MB21_TIMESTAMP) +#define bfin_write_CAN0_MB21_TIMESTAMP(val) bfin_write16(CAN0_MB21_TIMESTAMP, val) +#define bfin_read_CAN0_MB21_ID0() bfin_read16(CAN0_MB21_ID0) +#define bfin_write_CAN0_MB21_ID0(val) bfin_write16(CAN0_MB21_ID0, val) +#define bfin_read_CAN0_MB21_ID1() bfin_read16(CAN0_MB21_ID1) +#define bfin_write_CAN0_MB21_ID1(val) bfin_write16(CAN0_MB21_ID1, val) +#define bfin_read_CAN0_MB22_DATA0() bfin_read16(CAN0_MB22_DATA0) +#define bfin_write_CAN0_MB22_DATA0(val) bfin_write16(CAN0_MB22_DATA0, val) +#define bfin_read_CAN0_MB22_DATA1() bfin_read16(CAN0_MB22_DATA1) +#define bfin_write_CAN0_MB22_DATA1(val) bfin_write16(CAN0_MB22_DATA1, val) +#define bfin_read_CAN0_MB22_DATA2() bfin_read16(CAN0_MB22_DATA2) +#define bfin_write_CAN0_MB22_DATA2(val) bfin_write16(CAN0_MB22_DATA2, val) +#define bfin_read_CAN0_MB22_DATA3() bfin_read16(CAN0_MB22_DATA3) +#define bfin_write_CAN0_MB22_DATA3(val) bfin_write16(CAN0_MB22_DATA3, val) +#define bfin_read_CAN0_MB22_LENGTH() bfin_read16(CAN0_MB22_LENGTH) +#define bfin_write_CAN0_MB22_LENGTH(val) bfin_write16(CAN0_MB22_LENGTH, val) +#define bfin_read_CAN0_MB22_TIMESTAMP() bfin_read16(CAN0_MB22_TIMESTAMP) +#define bfin_write_CAN0_MB22_TIMESTAMP(val) bfin_write16(CAN0_MB22_TIMESTAMP, val) +#define bfin_read_CAN0_MB22_ID0() bfin_read16(CAN0_MB22_ID0) +#define bfin_write_CAN0_MB22_ID0(val) bfin_write16(CAN0_MB22_ID0, val) +#define bfin_read_CAN0_MB22_ID1() bfin_read16(CAN0_MB22_ID1) +#define bfin_write_CAN0_MB22_ID1(val) bfin_write16(CAN0_MB22_ID1, val) +#define bfin_read_CAN0_MB23_DATA0() bfin_read16(CAN0_MB23_DATA0) +#define bfin_write_CAN0_MB23_DATA0(val) bfin_write16(CAN0_MB23_DATA0, val) +#define bfin_read_CAN0_MB23_DATA1() bfin_read16(CAN0_MB23_DATA1) +#define bfin_write_CAN0_MB23_DATA1(val) bfin_write16(CAN0_MB23_DATA1, val) +#define bfin_read_CAN0_MB23_DATA2() bfin_read16(CAN0_MB23_DATA2) +#define bfin_write_CAN0_MB23_DATA2(val) bfin_write16(CAN0_MB23_DATA2, val) +#define bfin_read_CAN0_MB23_DATA3() bfin_read16(CAN0_MB23_DATA3) +#define bfin_write_CAN0_MB23_DATA3(val) bfin_write16(CAN0_MB23_DATA3, val) +#define bfin_read_CAN0_MB23_LENGTH() bfin_read16(CAN0_MB23_LENGTH) +#define bfin_write_CAN0_MB23_LENGTH(val) bfin_write16(CAN0_MB23_LENGTH, val) +#define bfin_read_CAN0_MB23_TIMESTAMP() bfin_read16(CAN0_MB23_TIMESTAMP) +#define bfin_write_CAN0_MB23_TIMESTAMP(val) bfin_write16(CAN0_MB23_TIMESTAMP, val) +#define bfin_read_CAN0_MB23_ID0() bfin_read16(CAN0_MB23_ID0) +#define bfin_write_CAN0_MB23_ID0(val) bfin_write16(CAN0_MB23_ID0, val) +#define bfin_read_CAN0_MB23_ID1() bfin_read16(CAN0_MB23_ID1) +#define bfin_write_CAN0_MB23_ID1(val) bfin_write16(CAN0_MB23_ID1, val) +#define bfin_read_CAN0_MB24_DATA0() bfin_read16(CAN0_MB24_DATA0) +#define bfin_write_CAN0_MB24_DATA0(val) bfin_write16(CAN0_MB24_DATA0, val) +#define bfin_read_CAN0_MB24_DATA1() bfin_read16(CAN0_MB24_DATA1) +#define bfin_write_CAN0_MB24_DATA1(val) bfin_write16(CAN0_MB24_DATA1, val) +#define bfin_read_CAN0_MB24_DATA2() bfin_read16(CAN0_MB24_DATA2) +#define bfin_write_CAN0_MB24_DATA2(val) bfin_write16(CAN0_MB24_DATA2, val) +#define bfin_read_CAN0_MB24_DATA3() bfin_read16(CAN0_MB24_DATA3) +#define bfin_write_CAN0_MB24_DATA3(val) bfin_write16(CAN0_MB24_DATA3, val) +#define bfin_read_CAN0_MB24_LENGTH() bfin_read16(CAN0_MB24_LENGTH) +#define bfin_write_CAN0_MB24_LENGTH(val) bfin_write16(CAN0_MB24_LENGTH, val) +#define bfin_read_CAN0_MB24_TIMESTAMP() bfin_read16(CAN0_MB24_TIMESTAMP) +#define bfin_write_CAN0_MB24_TIMESTAMP(val) bfin_write16(CAN0_MB24_TIMESTAMP, val) +#define bfin_read_CAN0_MB24_ID0() bfin_read16(CAN0_MB24_ID0) +#define bfin_write_CAN0_MB24_ID0(val) bfin_write16(CAN0_MB24_ID0, val) +#define bfin_read_CAN0_MB24_ID1() bfin_read16(CAN0_MB24_ID1) +#define bfin_write_CAN0_MB24_ID1(val) bfin_write16(CAN0_MB24_ID1, val) +#define bfin_read_CAN0_MB25_DATA0() bfin_read16(CAN0_MB25_DATA0) +#define bfin_write_CAN0_MB25_DATA0(val) bfin_write16(CAN0_MB25_DATA0, val) +#define bfin_read_CAN0_MB25_DATA1() bfin_read16(CAN0_MB25_DATA1) +#define bfin_write_CAN0_MB25_DATA1(val) bfin_write16(CAN0_MB25_DATA1, val) +#define bfin_read_CAN0_MB25_DATA2() bfin_read16(CAN0_MB25_DATA2) +#define bfin_write_CAN0_MB25_DATA2(val) bfin_write16(CAN0_MB25_DATA2, val) +#define bfin_read_CAN0_MB25_DATA3() bfin_read16(CAN0_MB25_DATA3) +#define bfin_write_CAN0_MB25_DATA3(val) bfin_write16(CAN0_MB25_DATA3, val) +#define bfin_read_CAN0_MB25_LENGTH() bfin_read16(CAN0_MB25_LENGTH) +#define bfin_write_CAN0_MB25_LENGTH(val) bfin_write16(CAN0_MB25_LENGTH, val) +#define bfin_read_CAN0_MB25_TIMESTAMP() bfin_read16(CAN0_MB25_TIMESTAMP) +#define bfin_write_CAN0_MB25_TIMESTAMP(val) bfin_write16(CAN0_MB25_TIMESTAMP, val) +#define bfin_read_CAN0_MB25_ID0() bfin_read16(CAN0_MB25_ID0) +#define bfin_write_CAN0_MB25_ID0(val) bfin_write16(CAN0_MB25_ID0, val) +#define bfin_read_CAN0_MB25_ID1() bfin_read16(CAN0_MB25_ID1) +#define bfin_write_CAN0_MB25_ID1(val) bfin_write16(CAN0_MB25_ID1, val) +#define bfin_read_CAN0_MB26_DATA0() bfin_read16(CAN0_MB26_DATA0) +#define bfin_write_CAN0_MB26_DATA0(val) bfin_write16(CAN0_MB26_DATA0, val) +#define bfin_read_CAN0_MB26_DATA1() bfin_read16(CAN0_MB26_DATA1) +#define bfin_write_CAN0_MB26_DATA1(val) bfin_write16(CAN0_MB26_DATA1, val) +#define bfin_read_CAN0_MB26_DATA2() bfin_read16(CAN0_MB26_DATA2) +#define bfin_write_CAN0_MB26_DATA2(val) bfin_write16(CAN0_MB26_DATA2, val) +#define bfin_read_CAN0_MB26_DATA3() bfin_read16(CAN0_MB26_DATA3) +#define bfin_write_CAN0_MB26_DATA3(val) bfin_write16(CAN0_MB26_DATA3, val) +#define bfin_read_CAN0_MB26_LENGTH() bfin_read16(CAN0_MB26_LENGTH) +#define bfin_write_CAN0_MB26_LENGTH(val) bfin_write16(CAN0_MB26_LENGTH, val) +#define bfin_read_CAN0_MB26_TIMESTAMP() bfin_read16(CAN0_MB26_TIMESTAMP) +#define bfin_write_CAN0_MB26_TIMESTAMP(val) bfin_write16(CAN0_MB26_TIMESTAMP, val) +#define bfin_read_CAN0_MB26_ID0() bfin_read16(CAN0_MB26_ID0) +#define bfin_write_CAN0_MB26_ID0(val) bfin_write16(CAN0_MB26_ID0, val) +#define bfin_read_CAN0_MB26_ID1() bfin_read16(CAN0_MB26_ID1) +#define bfin_write_CAN0_MB26_ID1(val) bfin_write16(CAN0_MB26_ID1, val) +#define bfin_read_CAN0_MB27_DATA0() bfin_read16(CAN0_MB27_DATA0) +#define bfin_write_CAN0_MB27_DATA0(val) bfin_write16(CAN0_MB27_DATA0, val) +#define bfin_read_CAN0_MB27_DATA1() bfin_read16(CAN0_MB27_DATA1) +#define bfin_write_CAN0_MB27_DATA1(val) bfin_write16(CAN0_MB27_DATA1, val) +#define bfin_read_CAN0_MB27_DATA2() bfin_read16(CAN0_MB27_DATA2) +#define bfin_write_CAN0_MB27_DATA2(val) bfin_write16(CAN0_MB27_DATA2, val) +#define bfin_read_CAN0_MB27_DATA3() bfin_read16(CAN0_MB27_DATA3) +#define bfin_write_CAN0_MB27_DATA3(val) bfin_write16(CAN0_MB27_DATA3, val) +#define bfin_read_CAN0_MB27_LENGTH() bfin_read16(CAN0_MB27_LENGTH) +#define bfin_write_CAN0_MB27_LENGTH(val) bfin_write16(CAN0_MB27_LENGTH, val) +#define bfin_read_CAN0_MB27_TIMESTAMP() bfin_read16(CAN0_MB27_TIMESTAMP) +#define bfin_write_CAN0_MB27_TIMESTAMP(val) bfin_write16(CAN0_MB27_TIMESTAMP, val) +#define bfin_read_CAN0_MB27_ID0() bfin_read16(CAN0_MB27_ID0) +#define bfin_write_CAN0_MB27_ID0(val) bfin_write16(CAN0_MB27_ID0, val) +#define bfin_read_CAN0_MB27_ID1() bfin_read16(CAN0_MB27_ID1) +#define bfin_write_CAN0_MB27_ID1(val) bfin_write16(CAN0_MB27_ID1, val) +#define bfin_read_CAN0_MB28_DATA0() bfin_read16(CAN0_MB28_DATA0) +#define bfin_write_CAN0_MB28_DATA0(val) bfin_write16(CAN0_MB28_DATA0, val) +#define bfin_read_CAN0_MB28_DATA1() bfin_read16(CAN0_MB28_DATA1) +#define bfin_write_CAN0_MB28_DATA1(val) bfin_write16(CAN0_MB28_DATA1, val) +#define bfin_read_CAN0_MB28_DATA2() bfin_read16(CAN0_MB28_DATA2) +#define bfin_write_CAN0_MB28_DATA2(val) bfin_write16(CAN0_MB28_DATA2, val) +#define bfin_read_CAN0_MB28_DATA3() bfin_read16(CAN0_MB28_DATA3) +#define bfin_write_CAN0_MB28_DATA3(val) bfin_write16(CAN0_MB28_DATA3, val) +#define bfin_read_CAN0_MB28_LENGTH() bfin_read16(CAN0_MB28_LENGTH) +#define bfin_write_CAN0_MB28_LENGTH(val) bfin_write16(CAN0_MB28_LENGTH, val) +#define bfin_read_CAN0_MB28_TIMESTAMP() bfin_read16(CAN0_MB28_TIMESTAMP) +#define bfin_write_CAN0_MB28_TIMESTAMP(val) bfin_write16(CAN0_MB28_TIMESTAMP, val) +#define bfin_read_CAN0_MB28_ID0() bfin_read16(CAN0_MB28_ID0) +#define bfin_write_CAN0_MB28_ID0(val) bfin_write16(CAN0_MB28_ID0, val) +#define bfin_read_CAN0_MB28_ID1() bfin_read16(CAN0_MB28_ID1) +#define bfin_write_CAN0_MB28_ID1(val) bfin_write16(CAN0_MB28_ID1, val) +#define bfin_read_CAN0_MB29_DATA0() bfin_read16(CAN0_MB29_DATA0) +#define bfin_write_CAN0_MB29_DATA0(val) bfin_write16(CAN0_MB29_DATA0, val) +#define bfin_read_CAN0_MB29_DATA1() bfin_read16(CAN0_MB29_DATA1) +#define bfin_write_CAN0_MB29_DATA1(val) bfin_write16(CAN0_MB29_DATA1, val) +#define bfin_read_CAN0_MB29_DATA2() bfin_read16(CAN0_MB29_DATA2) +#define bfin_write_CAN0_MB29_DATA2(val) bfin_write16(CAN0_MB29_DATA2, val) +#define bfin_read_CAN0_MB29_DATA3() bfin_read16(CAN0_MB29_DATA3) +#define bfin_write_CAN0_MB29_DATA3(val) bfin_write16(CAN0_MB29_DATA3, val) +#define bfin_read_CAN0_MB29_LENGTH() bfin_read16(CAN0_MB29_LENGTH) +#define bfin_write_CAN0_MB29_LENGTH(val) bfin_write16(CAN0_MB29_LENGTH, val) +#define bfin_read_CAN0_MB29_TIMESTAMP() bfin_read16(CAN0_MB29_TIMESTAMP) +#define bfin_write_CAN0_MB29_TIMESTAMP(val) bfin_write16(CAN0_MB29_TIMESTAMP, val) +#define bfin_read_CAN0_MB29_ID0() bfin_read16(CAN0_MB29_ID0) +#define bfin_write_CAN0_MB29_ID0(val) bfin_write16(CAN0_MB29_ID0, val) +#define bfin_read_CAN0_MB29_ID1() bfin_read16(CAN0_MB29_ID1) +#define bfin_write_CAN0_MB29_ID1(val) bfin_write16(CAN0_MB29_ID1, val) +#define bfin_read_CAN0_MB30_DATA0() bfin_read16(CAN0_MB30_DATA0) +#define bfin_write_CAN0_MB30_DATA0(val) bfin_write16(CAN0_MB30_DATA0, val) +#define bfin_read_CAN0_MB30_DATA1() bfin_read16(CAN0_MB30_DATA1) +#define bfin_write_CAN0_MB30_DATA1(val) bfin_write16(CAN0_MB30_DATA1, val) +#define bfin_read_CAN0_MB30_DATA2() bfin_read16(CAN0_MB30_DATA2) +#define bfin_write_CAN0_MB30_DATA2(val) bfin_write16(CAN0_MB30_DATA2, val) +#define bfin_read_CAN0_MB30_DATA3() bfin_read16(CAN0_MB30_DATA3) +#define bfin_write_CAN0_MB30_DATA3(val) bfin_write16(CAN0_MB30_DATA3, val) +#define bfin_read_CAN0_MB30_LENGTH() bfin_read16(CAN0_MB30_LENGTH) +#define bfin_write_CAN0_MB30_LENGTH(val) bfin_write16(CAN0_MB30_LENGTH, val) +#define bfin_read_CAN0_MB30_TIMESTAMP() bfin_read16(CAN0_MB30_TIMESTAMP) +#define bfin_write_CAN0_MB30_TIMESTAMP(val) bfin_write16(CAN0_MB30_TIMESTAMP, val) +#define bfin_read_CAN0_MB30_ID0() bfin_read16(CAN0_MB30_ID0) +#define bfin_write_CAN0_MB30_ID0(val) bfin_write16(CAN0_MB30_ID0, val) +#define bfin_read_CAN0_MB30_ID1() bfin_read16(CAN0_MB30_ID1) +#define bfin_write_CAN0_MB30_ID1(val) bfin_write16(CAN0_MB30_ID1, val) +#define bfin_read_CAN0_MB31_DATA0() bfin_read16(CAN0_MB31_DATA0) +#define bfin_write_CAN0_MB31_DATA0(val) bfin_write16(CAN0_MB31_DATA0, val) +#define bfin_read_CAN0_MB31_DATA1() bfin_read16(CAN0_MB31_DATA1) +#define bfin_write_CAN0_MB31_DATA1(val) bfin_write16(CAN0_MB31_DATA1, val) +#define bfin_read_CAN0_MB31_DATA2() bfin_read16(CAN0_MB31_DATA2) +#define bfin_write_CAN0_MB31_DATA2(val) bfin_write16(CAN0_MB31_DATA2, val) +#define bfin_read_CAN0_MB31_DATA3() bfin_read16(CAN0_MB31_DATA3) +#define bfin_write_CAN0_MB31_DATA3(val) bfin_write16(CAN0_MB31_DATA3, val) +#define bfin_read_CAN0_MB31_LENGTH() bfin_read16(CAN0_MB31_LENGTH) +#define bfin_write_CAN0_MB31_LENGTH(val) bfin_write16(CAN0_MB31_LENGTH, val) +#define bfin_read_CAN0_MB31_TIMESTAMP() bfin_read16(CAN0_MB31_TIMESTAMP) +#define bfin_write_CAN0_MB31_TIMESTAMP(val) bfin_write16(CAN0_MB31_TIMESTAMP, val) +#define bfin_read_CAN0_MB31_ID0() bfin_read16(CAN0_MB31_ID0) +#define bfin_write_CAN0_MB31_ID0(val) bfin_write16(CAN0_MB31_ID0, val) +#define bfin_read_CAN0_MB31_ID1() bfin_read16(CAN0_MB31_ID1) +#define bfin_write_CAN0_MB31_ID1(val) bfin_write16(CAN0_MB31_ID1, val) + +/* Counter Registers */ + +#define bfin_read_CNT_CONFIG() bfin_read16(CNT_CONFIG) +#define bfin_write_CNT_CONFIG(val) bfin_write16(CNT_CONFIG, val) +#define bfin_read_CNT_IMASK() bfin_read16(CNT_IMASK) +#define bfin_write_CNT_IMASK(val) bfin_write16(CNT_IMASK, val) +#define bfin_read_CNT_STATUS() bfin_read16(CNT_STATUS) +#define bfin_write_CNT_STATUS(val) bfin_write16(CNT_STATUS, val) +#define bfin_read_CNT_COMMAND() bfin_read16(CNT_COMMAND) +#define bfin_write_CNT_COMMAND(val) bfin_write16(CNT_COMMAND, val) +#define bfin_read_CNT_DEBOUNCE() bfin_read16(CNT_DEBOUNCE) +#define bfin_write_CNT_DEBOUNCE(val) bfin_write16(CNT_DEBOUNCE, val) +#define bfin_read_CNT_COUNTER() bfin_read32(CNT_COUNTER) +#define bfin_write_CNT_COUNTER(val) bfin_write32(CNT_COUNTER, val) +#define bfin_read_CNT_MAX() bfin_read32(CNT_MAX) +#define bfin_write_CNT_MAX(val) bfin_write32(CNT_MAX, val) +#define bfin_read_CNT_MIN() bfin_read32(CNT_MIN) +#define bfin_write_CNT_MIN(val) bfin_write32(CNT_MIN, val) + +/* RSI Register */ +#define bfin_read_RSI_CLK_CTL() bfin_read16(RSI_CLK_CONTROL) +#define bfin_write_RSI_CLK_CTL(val) bfin_write16(RSI_CLK_CONTROL, val) +#define bfin_read_RSI_ARGUMENT() bfin_read32(RSI_ARGUMENT) +#define bfin_write_RSI_ARGUMENT(val) bfin_write32(RSI_ARGUMENT, val) +#define bfin_read_RSI_COMMAND() bfin_read16(RSI_COMMAND) +#define bfin_write_RSI_COMMAND(val) bfin_write16(RSI_COMMAND, val) +#define bfin_read_RSI_RESP_CMD() bfin_read16(RSI_RESP_CMD) +#define bfin_write_RSI_RESP_CMD(val) bfin_write16(RSI_RESP_CMD, val) +#define bfin_read_RSI_RESPONSE0() bfin_read32(RSI_RESPONSE0) +#define bfin_write_RSI_RESPONSE0(val) bfin_write32(RSI_RESPONSE0, val) +#define bfin_read_RSI_RESPONSE1() bfin_read32(RSI_RESPONSE1) +#define bfin_write_RSI_RESPONSE1(val) bfin_write32(RSI_RESPONSE1, val) +#define bfin_read_RSI_RESPONSE2() bfin_read32(RSI_RESPONSE2) +#define bfin_write_RSI_RESPONSE2(val) bfin_write32(RSI_RESPONSE2, val) +#define bfin_read_RSI_RESPONSE3() bfin_read32(RSI_RESPONSE3) +#define bfin_write_RSI_RESPONSE3(val) bfin_write32(RSI_RESPONSE3, val) +#define bfin_read_RSI_DATA_TIMER() bfin_read32(RSI_DATA_TIMER) +#define bfin_write_RSI_DATA_TIMER(val) bfin_write32(RSI_DATA_TIMER, val) +#define bfin_read_RSI_DATA_LGTH() bfin_read16(RSI_DATA_LGTH) +#define bfin_write_RSI_DATA_LGTH(val) bfin_write16(RSI_DATA_LGTH, val) +#define bfin_read_RSI_DATA_CTL() bfin_read16(RSI_DATA_CONTROL) +#define bfin_write_RSI_DATA_CTL(val) bfin_write16(RSI_DATA_CONTROL, val) +#define bfin_read_RSI_DATA_CNT() bfin_read16(RSI_DATA_CNT) +#define bfin_write_RSI_DATA_CNT(val) bfin_write16(RSI_DATA_CNT, val) +#define bfin_read_RSI_STATUS() bfin_read32(RSI_STATUS) +#define bfin_write_RSI_STATUS(val) bfin_write32(RSI_STATUS, val) +#define bfin_read_RSI_STATUS_CLR() bfin_read16(RSI_STATUSCL) +#define bfin_write_RSI_STATUS_CLR(val) bfin_write16(RSI_STATUSCL, val) +#define bfin_read_RSI_MASK0() bfin_read32(RSI_MASK0) +#define bfin_write_RSI_MASK0(val) bfin_write32(RSI_MASK0, val) +#define bfin_read_RSI_MASK1() bfin_read32(RSI_MASK1) +#define bfin_write_RSI_MASK1(val) bfin_write32(RSI_MASK1, val) +#define bfin_read_RSI_FIFO_CNT() bfin_read16(RSI_FIFO_CNT) +#define bfin_write_RSI_FIFO_CNT(val) bfin_write16(RSI_FIFO_CNT, val) +#define bfin_read_RSI_CEATA_CONTROL() bfin_read16(RSI_CEATA_CONTROL) +#define bfin_write_RSI_CEATA_CONTROL(val) bfin_write16(RSI_CEATA_CONTROL, val) +#define bfin_read_RSI_BLKSZ() bfin_read16(RSI_BLKSZ) +#define bfin_write_RSI_BLKSZ(val) bfin_write16(RSI_BLKSZ, val) +#define bfin_read_RSI_FIFO() bfin_read32(RSI_FIFO) +#define bfin_write_RSI_FIFO(val) bfin_write32(RSI_FIFO, val) +#define bfin_read_RSI_E_STATUS() bfin_read32(RSI_ESTAT) +#define bfin_write_RSI_E_STATUS(val) bfin_write32(RSI_ESTAT, val) +#define bfin_read_RSI_E_MASK() bfin_read32(RSI_EMASK) +#define bfin_write_RSI_E_MASK(val) bfin_write32(RSI_EMASK, val) +#define bfin_read_RSI_CFG() bfin_read16(RSI_CONFIG) +#define bfin_write_RSI_CFG(val) bfin_write16(RSI_CONFIG, val) +#define bfin_read_RSI_RD_WAIT_EN() bfin_read16(RSI_RD_WAIT_EN) +#define bfin_write_RSI_RD_WAIT_EN(val) bfin_write16(RSI_RD_WAIT_EN, val) +#define bfin_read_RSI_PID0() bfin_read16(RSI_PID0) +#define bfin_write_RSI_PID0(val) bfin_write16(RSI_PID0, val) +#define bfin_read_RSI_PID1() bfin_read16(RSI_PID1) +#define bfin_write_RSI_PID1(val) bfin_write16(RSI_PID1, val) +#define bfin_read_RSI_PID2() bfin_read16(RSI_PID2) +#define bfin_write_RSI_PID2(val) bfin_write16(RSI_PID2, val) +#define bfin_read_RSI_PID3() bfin_read16(RSI_PID3) +#define bfin_write_RSI_PID3(val) bfin_write16(RSI_PID3, val) + +/* usb register */ +#define bfin_read_USB_PLLOSC_CTRL() bfin_read16(USB_PLL_OSC) +#define bfin_write_USB_PLLOSC_CTRL(val) bfin_write16(USB_PLL_OSC, val) +#define bfin_write_USB_VBUS_CTL(val) bfin_write8(USB_VBUS_CTL, val) +#define bfin_write_USB_APHY_CNTRL(val) bfin_write8(USB_PHY_CTL, val) +#define bfin_read_USB_APHY_CNTRL() bfin_read8(USB_PHY_CTL) + +#endif /* _CDEF_BF60X_H */ + diff --git a/arch/blackfin/mach-bf609/include/mach/defBF609.h b/arch/blackfin/mach-bf609/include/mach/defBF609.h new file mode 100644 index 00000000000..8045ade3437 --- /dev/null +++ b/arch/blackfin/mach-bf609/include/mach/defBF609.h @@ -0,0 +1,286 @@ +/* + * Copyright 2011 Analog Devices Inc. + * + * Licensed under the Clear BSD license or the GPL-2 (or later) + */ + +#ifndef _DEF_BF609_H +#define _DEF_BF609_H + +/* Include defBF60x_base.h for the set of #defines that are common to all ADSP-BF60x processors */ +#include "defBF60x_base.h" + +/* The following are the #defines needed by ADSP-BF609 that are not in the common header */ +/* ========================= + PIXC Registers + ========================= */ + +/* ========================= + PIXC0 + ========================= */ +#define PIXC0_CTL 0xFFC19000 /* PIXC0 Control Register */ +#define PIXC0_PPL 0xFFC19004 /* PIXC0 Pixels Per Line Register */ +#define PIXC0_LPF 0xFFC19008 /* PIXC0 Line Per Frame Register */ +#define PIXC0_HSTART_A 0xFFC1900C /* PIXC0 Overlay A Horizontal Start Register */ +#define PIXC0_HEND_A 0xFFC19010 /* PIXC0 Overlay A Horizontal End Register */ +#define PIXC0_VSTART_A 0xFFC19014 /* PIXC0 Overlay A Vertical Start Register */ +#define PIXC0_VEND_A 0xFFC19018 /* PIXC0 Overlay A Vertical End Register */ +#define PIXC0_TRANSP_A 0xFFC1901C /* PIXC0 Overlay A Transparency Ratio Register */ +#define PIXC0_HSTART_B 0xFFC19020 /* PIXC0 Overlay B Horizontal Start Register */ +#define PIXC0_HEND_B 0xFFC19024 /* PIXC0 Overlay B Horizontal End Register */ +#define PIXC0_VSTART_B 0xFFC19028 /* PIXC0 Overlay B Vertical Start Register */ +#define PIXC0_VEND_B 0xFFC1902C /* PIXC0 Overlay B Vertical End Register */ +#define PIXC0_TRANSP_B 0xFFC19030 /* PIXC0 Overlay B Transparency Ratio Register */ +#define PIXC0_IRQSTAT 0xFFC1903C /* PIXC0 Interrupt Status Register */ +#define PIXC0_CONRY 0xFFC19040 /* PIXC0 RY Conversion Component Register */ +#define PIXC0_CONGU 0xFFC19044 /* PIXC0 GU Conversion Component Register */ +#define PIXC0_CONBV 0xFFC19048 /* PIXC0 BV Conversion Component Register */ +#define PIXC0_CCBIAS 0xFFC1904C /* PIXC0 Conversion Bias Register */ +#define PIXC0_TC 0xFFC19050 /* PIXC0 Transparency Register */ +#define PIXC0_REVID 0xFFC19054 /* PIXC0 PIXC Revision Id */ + +/* ========================= + PVP Registers + ========================= */ + +/* ========================= + PVP0 + ========================= */ +#define PVP0_REVID 0xFFC1A000 /* PVP0 Revision ID */ +#define PVP0_CTL 0xFFC1A004 /* PVP0 Control */ +#define PVP0_IMSK0 0xFFC1A008 /* PVP0 INTn interrupt line masks */ +#define PVP0_IMSK1 0xFFC1A00C /* PVP0 INTn interrupt line masks */ +#define PVP0_STAT 0xFFC1A010 /* PVP0 Status */ +#define PVP0_ILAT 0xFFC1A014 /* PVP0 Latched status */ +#define PVP0_IREQ0 0xFFC1A018 /* PVP0 INT0 masked latched status */ +#define PVP0_IREQ1 0xFFC1A01C /* PVP0 INT0 masked latched status */ +#define PVP0_OPF0_CFG 0xFFC1A020 /* PVP0 Config */ +#define PVP0_OPF1_CFG 0xFFC1A040 /* PVP0 Config */ +#define PVP0_OPF2_CFG 0xFFC1A060 /* PVP0 Config */ +#define PVP0_OPF0_CTL 0xFFC1A024 /* PVP0 Control */ +#define PVP0_OPF1_CTL 0xFFC1A044 /* PVP0 Control */ +#define PVP0_OPF2_CTL 0xFFC1A064 /* PVP0 Control */ +#define PVP0_OPF3_CFG 0xFFC1A080 /* PVP0 Config */ +#define PVP0_OPF3_CTL 0xFFC1A084 /* PVP0 Control */ +#define PVP0_PEC_CFG 0xFFC1A0A0 /* PVP0 Config */ +#define PVP0_PEC_CTL 0xFFC1A0A4 /* PVP0 Control */ +#define PVP0_PEC_D1TH0 0xFFC1A0A8 /* PVP0 Lower Hysteresis Threshold */ +#define PVP0_PEC_D1TH1 0xFFC1A0AC /* PVP0 Upper Hysteresis Threshold */ +#define PVP0_PEC_D2TH0 0xFFC1A0B0 /* PVP0 Weak Zero Crossing Threshold */ +#define PVP0_PEC_D2TH1 0xFFC1A0B4 /* PVP0 Strong Zero Crossing Threshold */ +#define PVP0_IIM0_CFG 0xFFC1A0C0 /* PVP0 Config */ +#define PVP0_IIM1_CFG 0xFFC1A0E0 /* PVP0 Config */ +#define PVP0_IIM0_CTL 0xFFC1A0C4 /* PVP0 Control */ +#define PVP0_IIM1_CTL 0xFFC1A0E4 /* PVP0 Control */ +#define PVP0_IIM0_SCALE 0xFFC1A0C8 /* PVP0 Scaler Values */ +#define PVP0_IIM1_SCALE 0xFFC1A0E8 /* PVP0 Scaler Values */ +#define PVP0_IIM0_SOVF_STAT 0xFFC1A0CC /* PVP0 Signed Overflow Status */ +#define PVP0_IIM1_SOVF_STAT 0xFFC1A0EC /* PVP0 Signed Overflow Status */ +#define PVP0_IIM0_UOVF_STAT 0xFFC1A0D0 /* PVP0 Unsigned Overflow Status */ +#define PVP0_IIM1_UOVF_STAT 0xFFC1A0F0 /* PVP0 Unsigned Overflow Status */ +#define PVP0_ACU_CFG 0xFFC1A100 /* PVP0 ACU Configuration Register */ +#define PVP0_ACU_CTL 0xFFC1A104 /* PVP0 ACU Control Register */ +#define PVP0_ACU_OFFSET 0xFFC1A108 /* PVP0 SUM constant register */ +#define PVP0_ACU_FACTOR 0xFFC1A10C /* PVP0 PROD constant register */ +#define PVP0_ACU_SHIFT 0xFFC1A110 /* PVP0 Shift constant register */ +#define PVP0_ACU_MIN 0xFFC1A114 /* PVP0 Lower saturation threshold set to MIN */ +#define PVP0_ACU_MAX 0xFFC1A118 /* PVP0 Upper saturation threshold set to MAX */ +#define PVP0_UDS_CFG 0xFFC1A140 /* PVP0 UDS Configuration Register */ +#define PVP0_UDS_CTL 0xFFC1A144 /* PVP0 UDS Control Register */ +#define PVP0_UDS_OHCNT 0xFFC1A148 /* PVP0 UDS Output H Dimension */ +#define PVP0_UDS_OVCNT 0xFFC1A14C /* PVP0 UDS Output V Dimension */ +#define PVP0_UDS_HAVG 0xFFC1A150 /* PVP0 UDS H Taps */ +#define PVP0_UDS_VAVG 0xFFC1A154 /* PVP0 UDS V Taps */ +#define PVP0_IPF0_CFG 0xFFC1A180 /* PVP0 Configuration */ +#define PVP0_IPF0_PIPECTL 0xFFC1A184 /* PVP0 Pipe Control */ +#define PVP0_IPF1_PIPECTL 0xFFC1A1C4 /* PVP0 Pipe Control */ +#define PVP0_IPF0_CTL 0xFFC1A188 /* PVP0 Control */ +#define PVP0_IPF1_CTL 0xFFC1A1C8 /* PVP0 Control */ +#define PVP0_IPF0_TAG 0xFFC1A18C /* PVP0 TAG Value */ +#define PVP0_IPF1_TAG 0xFFC1A1CC /* PVP0 TAG Value */ +#define PVP0_IPF0_FCNT 0xFFC1A190 /* PVP0 Frame Count */ +#define PVP0_IPF1_FCNT 0xFFC1A1D0 /* PVP0 Frame Count */ +#define PVP0_IPF0_HCNT 0xFFC1A194 /* PVP0 Horizontal Count */ +#define PVP0_IPF1_HCNT 0xFFC1A1D4 /* PVP0 Horizontal Count */ +#define PVP0_IPF0_VCNT 0xFFC1A198 /* PVP0 Vertical Count */ +#define PVP0_IPF1_VCNT 0xFFC1A1D8 /* PVP0 Vertical Count */ +#define PVP0_IPF0_HPOS 0xFFC1A19C /* PVP0 Horizontal Position */ +#define PVP0_IPF0_VPOS 0xFFC1A1A0 /* PVP0 Vertical Position */ +#define PVP0_IPF0_TAG_STAT 0xFFC1A1A4 /* PVP0 TAG Status */ +#define PVP0_IPF1_TAG_STAT 0xFFC1A1E4 /* PVP0 TAG Status */ +#define PVP0_IPF1_CFG 0xFFC1A1C0 /* PVP0 Configuration */ +#define PVP0_CNV0_CFG 0xFFC1A200 /* PVP0 Configuration */ +#define PVP0_CNV1_CFG 0xFFC1A280 /* PVP0 Configuration */ +#define PVP0_CNV2_CFG 0xFFC1A300 /* PVP0 Configuration */ +#define PVP0_CNV3_CFG 0xFFC1A380 /* PVP0 Configuration */ +#define PVP0_CNV0_CTL 0xFFC1A204 /* PVP0 Control */ +#define PVP0_CNV1_CTL 0xFFC1A284 /* PVP0 Control */ +#define PVP0_CNV2_CTL 0xFFC1A304 /* PVP0 Control */ +#define PVP0_CNV3_CTL 0xFFC1A384 /* PVP0 Control */ +#define PVP0_CNV0_C00C01 0xFFC1A208 /* PVP0 Coefficients 0, 0 and 0, 1 */ +#define PVP0_CNV1_C00C01 0xFFC1A288 /* PVP0 Coefficients 0, 0 and 0, 1 */ +#define PVP0_CNV2_C00C01 0xFFC1A308 /* PVP0 Coefficients 0, 0 and 0, 1 */ +#define PVP0_CNV3_C00C01 0xFFC1A388 /* PVP0 Coefficients 0, 0 and 0, 1 */ +#define PVP0_CNV0_C02C03 0xFFC1A20C /* PVP0 Coefficients 0, 2 and 0, 3 */ +#define PVP0_CNV1_C02C03 0xFFC1A28C /* PVP0 Coefficients 0, 2 and 0, 3 */ +#define PVP0_CNV2_C02C03 0xFFC1A30C /* PVP0 Coefficients 0, 2 and 0, 3 */ +#define PVP0_CNV3_C02C03 0xFFC1A38C /* PVP0 Coefficients 0, 2 and 0, 3 */ +#define PVP0_CNV0_C04 0xFFC1A210 /* PVP0 Coefficient 0, 4 */ +#define PVP0_CNV1_C04 0xFFC1A290 /* PVP0 Coefficient 0, 4 */ +#define PVP0_CNV2_C04 0xFFC1A310 /* PVP0 Coefficient 0, 4 */ +#define PVP0_CNV3_C04 0xFFC1A390 /* PVP0 Coefficient 0, 4 */ +#define PVP0_CNV0_C10C11 0xFFC1A214 /* PVP0 Coefficients 1, 0 and 1, 1 */ +#define PVP0_CNV1_C10C11 0xFFC1A294 /* PVP0 Coefficients 1, 0 and 1, 1 */ +#define PVP0_CNV2_C10C11 0xFFC1A314 /* PVP0 Coefficients 1, 0 and 1, 1 */ +#define PVP0_CNV3_C10C11 0xFFC1A394 /* PVP0 Coefficients 1, 0 and 1, 1 */ +#define PVP0_CNV0_C12C13 0xFFC1A218 /* PVP0 Coefficients 1, 2 and 1, 3 */ +#define PVP0_CNV1_C12C13 0xFFC1A298 /* PVP0 Coefficients 1, 2 and 1, 3 */ +#define PVP0_CNV2_C12C13 0xFFC1A318 /* PVP0 Coefficients 1, 2 and 1, 3 */ +#define PVP0_CNV3_C12C13 0xFFC1A398 /* PVP0 Coefficients 1, 2 and 1, 3 */ +#define PVP0_CNV0_C14 0xFFC1A21C /* PVP0 Coefficient 1, 4 */ +#define PVP0_CNV1_C14 0xFFC1A29C /* PVP0 Coefficient 1, 4 */ +#define PVP0_CNV2_C14 0xFFC1A31C /* PVP0 Coefficient 1, 4 */ +#define PVP0_CNV3_C14 0xFFC1A39C /* PVP0 Coefficient 1, 4 */ +#define PVP0_CNV0_C20C21 0xFFC1A220 /* PVP0 Coefficients 2, 0 and 2, 1 */ +#define PVP0_CNV1_C20C21 0xFFC1A2A0 /* PVP0 Coefficients 2, 0 and 2, 1 */ +#define PVP0_CNV2_C20C21 0xFFC1A320 /* PVP0 Coefficients 2, 0 and 2, 1 */ +#define PVP0_CNV3_C20C21 0xFFC1A3A0 /* PVP0 Coefficients 2, 0 and 2, 1 */ +#define PVP0_CNV0_C22C23 0xFFC1A224 /* PVP0 Coefficients 2, 2 and 2, 3 */ +#define PVP0_CNV1_C22C23 0xFFC1A2A4 /* PVP0 Coefficients 2, 2 and 2, 3 */ +#define PVP0_CNV2_C22C23 0xFFC1A324 /* PVP0 Coefficients 2, 2 and 2, 3 */ +#define PVP0_CNV3_C22C23 0xFFC1A3A4 /* PVP0 Coefficients 2, 2 and 2, 3 */ +#define PVP0_CNV0_C24 0xFFC1A228 /* PVP0 Coefficient 2,4 */ +#define PVP0_CNV1_C24 0xFFC1A2A8 /* PVP0 Coefficient 2,4 */ +#define PVP0_CNV2_C24 0xFFC1A328 /* PVP0 Coefficient 2,4 */ +#define PVP0_CNV3_C24 0xFFC1A3A8 /* PVP0 Coefficient 2,4 */ +#define PVP0_CNV0_C30C31 0xFFC1A22C /* PVP0 Coefficients 3, 0 and 3, 1 */ +#define PVP0_CNV1_C30C31 0xFFC1A2AC /* PVP0 Coefficients 3, 0 and 3, 1 */ +#define PVP0_CNV2_C30C31 0xFFC1A32C /* PVP0 Coefficients 3, 0 and 3, 1 */ +#define PVP0_CNV3_C30C31 0xFFC1A3AC /* PVP0 Coefficients 3, 0 and 3, 1 */ +#define PVP0_CNV0_C32C33 0xFFC1A230 /* PVP0 Coefficients 3, 2 and 3, 3 */ +#define PVP0_CNV1_C32C33 0xFFC1A2B0 /* PVP0 Coefficients 3, 2 and 3, 3 */ +#define PVP0_CNV2_C32C33 0xFFC1A330 /* PVP0 Coefficients 3, 2 and 3, 3 */ +#define PVP0_CNV3_C32C33 0xFFC1A3B0 /* PVP0 Coefficients 3, 2 and 3, 3 */ +#define PVP0_CNV0_C34 0xFFC1A234 /* PVP0 Coefficient 3, 4 */ +#define PVP0_CNV1_C34 0xFFC1A2B4 /* PVP0 Coefficient 3, 4 */ +#define PVP0_CNV2_C34 0xFFC1A334 /* PVP0 Coefficient 3, 4 */ +#define PVP0_CNV3_C34 0xFFC1A3B4 /* PVP0 Coefficient 3, 4 */ +#define PVP0_CNV0_C40C41 0xFFC1A238 /* PVP0 Coefficients 4, 0 and 4, 1 */ +#define PVP0_CNV1_C40C41 0xFFC1A2B8 /* PVP0 Coefficients 4, 0 and 4, 1 */ +#define PVP0_CNV2_C40C41 0xFFC1A338 /* PVP0 Coefficients 4, 0 and 4, 1 */ +#define PVP0_CNV3_C40C41 0xFFC1A3B8 /* PVP0 Coefficients 4, 0 and 4, 1 */ +#define PVP0_CNV0_C42C43 0xFFC1A23C /* PVP0 Coefficients 4, 2 and 4, 3 */ +#define PVP0_CNV1_C42C43 0xFFC1A2BC /* PVP0 Coefficients 4, 2 and 4, 3 */ +#define PVP0_CNV2_C42C43 0xFFC1A33C /* PVP0 Coefficients 4, 2 and 4, 3 */ +#define PVP0_CNV3_C42C43 0xFFC1A3BC /* PVP0 Coefficients 4, 2 and 4, 3 */ +#define PVP0_CNV0_C44 0xFFC1A240 /* PVP0 Coefficient 4, 4 */ +#define PVP0_CNV1_C44 0xFFC1A2C0 /* PVP0 Coefficient 4, 4 */ +#define PVP0_CNV2_C44 0xFFC1A340 /* PVP0 Coefficient 4, 4 */ +#define PVP0_CNV3_C44 0xFFC1A3C0 /* PVP0 Coefficient 4, 4 */ +#define PVP0_CNV0_SCALE 0xFFC1A244 /* PVP0 Scaling factor */ +#define PVP0_CNV1_SCALE 0xFFC1A2C4 /* PVP0 Scaling factor */ +#define PVP0_CNV2_SCALE 0xFFC1A344 /* PVP0 Scaling factor */ +#define PVP0_CNV3_SCALE 0xFFC1A3C4 /* PVP0 Scaling factor */ +#define PVP0_THC0_CFG 0xFFC1A400 /* PVP0 Configuration */ +#define PVP0_THC1_CFG 0xFFC1A500 /* PVP0 Configuration */ +#define PVP0_THC0_CTL 0xFFC1A404 /* PVP0 Control */ +#define PVP0_THC1_CTL 0xFFC1A504 /* PVP0 Control */ +#define PVP0_THC0_HFCNT 0xFFC1A408 /* PVP0 Number of frames */ +#define PVP0_THC1_HFCNT 0xFFC1A508 /* PVP0 Number of frames */ +#define PVP0_THC0_RMAXREP 0xFFC1A40C /* PVP0 Maximum number of RLE reports */ +#define PVP0_THC1_RMAXREP 0xFFC1A50C /* PVP0 Maximum number of RLE reports */ +#define PVP0_THC0_CMINVAL 0xFFC1A410 /* PVP0 Min clip value */ +#define PVP0_THC1_CMINVAL 0xFFC1A510 /* PVP0 Min clip value */ +#define PVP0_THC0_CMINTH 0xFFC1A414 /* PVP0 Clip Min Threshold */ +#define PVP0_THC1_CMINTH 0xFFC1A514 /* PVP0 Clip Min Threshold */ +#define PVP0_THC0_CMAXTH 0xFFC1A418 /* PVP0 Clip Max Threshold */ +#define PVP0_THC1_CMAXTH 0xFFC1A518 /* PVP0 Clip Max Threshold */ +#define PVP0_THC0_CMAXVAL 0xFFC1A41C /* PVP0 Max clip value */ +#define PVP0_THC1_CMAXVAL 0xFFC1A51C /* PVP0 Max clip value */ +#define PVP0_THC0_TH0 0xFFC1A420 /* PVP0 Threshold Value */ +#define PVP0_THC1_TH0 0xFFC1A520 /* PVP0 Threshold Value */ +#define PVP0_THC0_TH1 0xFFC1A424 /* PVP0 Threshold Value */ +#define PVP0_THC1_TH1 0xFFC1A524 /* PVP0 Threshold Value */ +#define PVP0_THC0_TH2 0xFFC1A428 /* PVP0 Threshold Value */ +#define PVP0_THC1_TH2 0xFFC1A528 /* PVP0 Threshold Value */ +#define PVP0_THC0_TH3 0xFFC1A42C /* PVP0 Threshold Value */ +#define PVP0_THC1_TH3 0xFFC1A52C /* PVP0 Threshold Value */ +#define PVP0_THC0_TH4 0xFFC1A430 /* PVP0 Threshold Value */ +#define PVP0_THC1_TH4 0xFFC1A530 /* PVP0 Threshold Value */ +#define PVP0_THC0_TH5 0xFFC1A434 /* PVP0 Threshold Value */ +#define PVP0_THC1_TH5 0xFFC1A534 /* PVP0 Threshold Value */ +#define PVP0_THC0_TH6 0xFFC1A438 /* PVP0 Threshold Value */ +#define PVP0_THC1_TH6 0xFFC1A538 /* PVP0 Threshold Value */ +#define PVP0_THC0_TH7 0xFFC1A43C /* PVP0 Threshold Value */ +#define PVP0_THC1_TH7 0xFFC1A53C /* PVP0 Threshold Value */ +#define PVP0_THC0_TH8 0xFFC1A440 /* PVP0 Threshold Value */ +#define PVP0_THC1_TH8 0xFFC1A540 /* PVP0 Threshold Value */ +#define PVP0_THC0_TH9 0xFFC1A444 /* PVP0 Threshold Value */ +#define PVP0_THC1_TH9 0xFFC1A544 /* PVP0 Threshold Value */ +#define PVP0_THC0_TH10 0xFFC1A448 /* PVP0 Threshold Value */ +#define PVP0_THC1_TH10 0xFFC1A548 /* PVP0 Threshold Value */ +#define PVP0_THC0_TH11 0xFFC1A44C /* PVP0 Threshold Value */ +#define PVP0_THC1_TH11 0xFFC1A54C /* PVP0 Threshold Value */ +#define PVP0_THC0_TH12 0xFFC1A450 /* PVP0 Threshold Value */ +#define PVP0_THC1_TH12 0xFFC1A550 /* PVP0 Threshold Value */ +#define PVP0_THC0_TH13 0xFFC1A454 /* PVP0 Threshold Value */ +#define PVP0_THC1_TH13 0xFFC1A554 /* PVP0 Threshold Value */ +#define PVP0_THC0_TH14 0xFFC1A458 /* PVP0 Threshold Value */ +#define PVP0_THC1_TH14 0xFFC1A558 /* PVP0 Threshold Value */ +#define PVP0_THC0_TH15 0xFFC1A45C /* PVP0 Threshold Value */ +#define PVP0_THC1_TH15 0xFFC1A55C /* PVP0 Threshold Value */ +#define PVP0_THC0_HHPOS 0xFFC1A460 /* PVP0 Window start X-coordinate */ +#define PVP0_THC1_HHPOS 0xFFC1A560 /* PVP0 Window start X-coordinate */ +#define PVP0_THC0_HVPOS 0xFFC1A464 /* PVP0 Window start Y-coordinate */ +#define PVP0_THC1_HVPOS 0xFFC1A564 /* PVP0 Window start Y-coordinate */ +#define PVP0_THC0_HHCNT 0xFFC1A468 /* PVP0 Window width in X dimension */ +#define PVP0_THC1_HHCNT 0xFFC1A568 /* PVP0 Window width in X dimension */ +#define PVP0_THC0_HVCNT 0xFFC1A46C /* PVP0 Window width in Y dimension */ +#define PVP0_THC1_HVCNT 0xFFC1A56C /* PVP0 Window width in Y dimension */ +#define PVP0_THC0_RHPOS 0xFFC1A470 /* PVP0 Window start X-coordinate */ +#define PVP0_THC1_RHPOS 0xFFC1A570 /* PVP0 Window start X-coordinate */ +#define PVP0_THC0_RVPOS 0xFFC1A474 /* PVP0 Window start Y-coordinate */ +#define PVP0_THC1_RVPOS 0xFFC1A574 /* PVP0 Window start Y-coordinate */ +#define PVP0_THC0_RHCNT 0xFFC1A478 /* PVP0 Window width in X dimension */ +#define PVP0_THC1_RHCNT 0xFFC1A578 /* PVP0 Window width in X dimension */ +#define PVP0_THC0_RVCNT 0xFFC1A47C /* PVP0 Window width in Y dimension */ +#define PVP0_THC1_RVCNT 0xFFC1A57C /* PVP0 Window width in Y dimension */ +#define PVP0_THC0_HFCNT_STAT 0xFFC1A480 /* PVP0 Current Frame counter */ +#define PVP0_THC1_HFCNT_STAT 0xFFC1A580 /* PVP0 Current Frame counter */ +#define PVP0_THC0_HCNT0_STAT 0xFFC1A484 /* PVP0 Histogram counter value */ +#define PVP0_THC1_HCNT0_STAT 0xFFC1A584 /* PVP0 Histogram counter value */ +#define PVP0_THC0_HCNT1_STAT 0xFFC1A488 /* PVP0 Histogram counter value */ +#define PVP0_THC1_HCNT1_STAT 0xFFC1A588 /* PVP0 Histogram counter value */ +#define PVP0_THC0_HCNT2_STAT 0xFFC1A48C /* PVP0 Histogram counter value */ +#define PVP0_THC1_HCNT2_STAT 0xFFC1A58C /* PVP0 Histogram counter value */ +#define PVP0_THC0_HCNT3_STAT 0xFFC1A490 /* PVP0 Histogram counter value */ +#define PVP0_THC1_HCNT3_STAT 0xFFC1A590 /* PVP0 Histogram counter value */ +#define PVP0_THC0_HCNT4_STAT 0xFFC1A494 /* PVP0 Histogram counter value */ +#define PVP0_THC1_HCNT4_STAT 0xFFC1A594 /* PVP0 Histogram counter value */ +#define PVP0_THC0_HCNT5_STAT 0xFFC1A498 /* PVP0 Histogram counter value */ +#define PVP0_THC1_HCNT5_STAT 0xFFC1A598 /* PVP0 Histogram counter value */ +#define PVP0_THC0_HCNT6_STAT 0xFFC1A49C /* PVP0 Histogram counter value */ +#define PVP0_THC1_HCNT6_STAT 0xFFC1A59C /* PVP0 Histogram counter value */ +#define PVP0_THC0_HCNT7_STAT 0xFFC1A4A0 /* PVP0 Histogram counter value */ +#define PVP0_THC1_HCNT7_STAT 0xFFC1A5A0 /* PVP0 Histogram counter value */ +#define PVP0_THC0_HCNT8_STAT 0xFFC1A4A4 /* PVP0 Histogram counter value */ +#define PVP0_THC1_HCNT8_STAT 0xFFC1A5A4 /* PVP0 Histogram counter value */ +#define PVP0_THC0_HCNT9_STAT 0xFFC1A4A8 /* PVP0 Histogram counter value */ +#define PVP0_THC1_HCNT9_STAT 0xFFC1A5A8 /* PVP0 Histogram counter value */ +#define PVP0_THC0_HCNT10_STAT 0xFFC1A4AC /* PVP0 Histogram counter value */ +#define PVP0_THC1_HCNT10_STAT 0xFFC1A5AC /* PVP0 Histogram counter value */ +#define PVP0_THC0_HCNT11_STAT 0xFFC1A4B0 /* PVP0 Histogram counter value */ +#define PVP0_THC1_HCNT11_STAT 0xFFC1A5B0 /* PVP0 Histogram counter value */ +#define PVP0_THC0_HCNT12_STAT 0xFFC1A4B4 /* PVP0 Histogram counter value */ +#define PVP0_THC1_HCNT12_STAT 0xFFC1A5B4 /* PVP0 Histogram counter value */ +#define PVP0_THC0_HCNT13_STAT 0xFFC1A4B8 /* PVP0 Histogram counter value */ +#define PVP0_THC1_HCNT13_STAT 0xFFC1A5B8 /* PVP0 Histogram counter value */ +#define PVP0_THC0_HCNT14_STAT 0xFFC1A4BC /* PVP0 Histogram counter value */ +#define PVP0_THC1_HCNT14_STAT 0xFFC1A5BC /* PVP0 Histogram counter value */ +#define PVP0_THC0_HCNT15_STAT 0xFFC1A4C0 /* PVP0 Histogram counter value */ +#define PVP0_THC1_HCNT15_STAT 0xFFC1A5C0 /* PVP0 Histogram counter value */ +#define PVP0_THC0_RREP_STAT 0xFFC1A4C4 /* PVP0 Number of RLE Reports */ +#define PVP0_THC1_RREP_STAT 0xFFC1A5C4 /* PVP0 Number of RLE Reports */ +#define PVP0_PMA_CFG 0xFFC1A600 /* PVP0 PMA Configuration Register */ + +#endif /* _DEF_BF609_H */ diff --git a/arch/blackfin/mach-bf609/include/mach/defBF60x_base.h b/arch/blackfin/mach-bf609/include/mach/defBF60x_base.h new file mode 100644 index 00000000000..35caa7bc192 --- /dev/null +++ b/arch/blackfin/mach-bf609/include/mach/defBF60x_base.h @@ -0,0 +1,3596 @@ +/* + * Copyright 2011 Analog Devices Inc. + * + * Licensed under the Clear BSD license or the GPL-2 (or later) + */ + +#ifndef _DEF_BF60X_H +#define _DEF_BF60X_H + + +/* ************************************************************** */ +/* SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF60x */ +/* ************************************************************** */ + + +/* ========================= + CNT Registers + ========================= */ + +/* ========================= + CNT0 + ========================= */ +#define CNT_CONFIG 0xFFC00400 /* CNT0 Configuration Register */ +#define CNT_IMASK 0xFFC00404 /* CNT0 Interrupt Mask Register */ +#define CNT_STATUS 0xFFC00408 /* CNT0 Status Register */ +#define CNT_COMMAND 0xFFC0040C /* CNT0 Command Register */ +#define CNT_DEBOUNCE 0xFFC00410 /* CNT0 Debounce Register */ +#define CNT_COUNTER 0xFFC00414 /* CNT0 Counter Register */ +#define CNT_MAX 0xFFC00418 /* CNT0 Maximum Count Register */ +#define CNT_MIN 0xFFC0041C /* CNT0 Minimum Count Register */ + + +/* ========================= + RSI Registers + ========================= */ + +#define RSI_CLK_CONTROL 0xFFC00604 /* RSI0 Clock Control Register */ +#define RSI_ARGUMENT 0xFFC00608 /* RSI0 Argument Register */ +#define RSI_COMMAND 0xFFC0060C /* RSI0 Command Register */ +#define RSI_RESP_CMD 0xFFC00610 /* RSI0 Response Command Register */ +#define RSI_RESPONSE0 0xFFC00614 /* RSI0 Response 0 Register */ +#define RSI_RESPONSE1 0xFFC00618 /* RSI0 Response 1 Register */ +#define RSI_RESPONSE2 0xFFC0061C /* RSI0 Response 2 Register */ +#define RSI_RESPONSE3 0xFFC00620 /* RSI0 Response 3 Register */ +#define RSI_DATA_TIMER 0xFFC00624 /* RSI0 Data Timer Register */ +#define RSI_DATA_LGTH 0xFFC00628 /* RSI0 Data Length Register */ +#define RSI_DATA_CONTROL 0xFFC0062C /* RSI0 Data Control Register */ +#define RSI_DATA_CNT 0xFFC00630 /* RSI0 Data Count Register */ +#define RSI_STATUS 0xFFC00634 /* RSI0 Status Register */ +#define RSI_STATUSCL 0xFFC00638 /* RSI0 Status Clear Register */ +#define RSI_MASK0 0xFFC0063C /* RSI0 Interrupt 0 Mask Register */ +#define RSI_MASK1 0xFFC00640 /* RSI0 Interrupt 1 Mask Register */ +#define RSI_FIFO_CNT 0xFFC00648 /* RSI0 FIFO Counter Register */ +#define RSI_CEATA_CONTROL 0xFFC0064C /* RSI0 This register contains bit to dis CCS gen */ +#define RSI_BOOT_TCNTR 0xFFC00650 /* RSI0 Boot Timing Counter Register */ +#define RSI_BACK_TOUT 0xFFC00654 /* RSI0 Boot Acknowledge Timeout Register */ +#define RSI_SLP_WKUP_TOUT 0xFFC00658 /* RSI0 Sleep Wakeup Timeout Register */ +#define RSI_BLKSZ 0xFFC0065C /* RSI0 Block Size Register */ +#define RSI_FIFO 0xFFC00680 /* RSI0 Data FIFO Register */ +#define RSI_ESTAT 0xFFC006C0 /* RSI0 Exception Status Register */ +#define RSI_EMASK 0xFFC006C4 /* RSI0 Exception Mask Register */ +#define RSI_CONFIG 0xFFC006C8 /* RSI0 Configuration Register */ +#define RSI_RD_WAIT_EN 0xFFC006CC /* RSI0 Read Wait Enable Register */ +#define RSI_PID0 0xFFC006D0 /* RSI0 Peripheral Identification Register */ +#define RSI_PID1 0xFFC006D4 /* RSI0 Peripheral Identification Register */ +#define RSI_PID2 0xFFC006D8 /* RSI0 Peripheral Identification Register */ +#define RSI_PID3 0xFFC006DC /* RSI0 Peripheral Identification Register */ + +/* ========================= + CAN Registers + ========================= */ + +/* ========================= + CAN0 + ========================= */ +#define CAN0_MC1 0xFFC00A00 /* CAN0 Mailbox Configuration Register 1 */ +#define CAN0_MD1 0xFFC00A04 /* CAN0 Mailbox Direction Register 1 */ +#define CAN0_TRS1 0xFFC00A08 /* CAN0 Transmission Request Set Register 1 */ +#define CAN0_TRR1 0xFFC00A0C /* CAN0 Transmission Request Reset Register 1 */ +#define CAN0_TA1 0xFFC00A10 /* CAN0 Transmission Acknowledge Register 1 */ +#define CAN0_AA1 0xFFC00A14 /* CAN0 Abort Acknowledge Register 1 */ +#define CAN0_RMP1 0xFFC00A18 /* CAN0 Receive Message Pending Register 1 */ +#define CAN0_RML1 0xFFC00A1C /* CAN0 Receive Message Lost Register 1 */ +#define CAN0_MBTIF1 0xFFC00A20 /* CAN0 Mailbox Transmit Interrupt Flag Register 1 */ +#define CAN0_MBRIF1 0xFFC00A24 /* CAN0 Mailbox Receive Interrupt Flag Register 1 */ +#define CAN0_MBIM1 0xFFC00A28 /* CAN0 Mailbox Interrupt Mask Register 1 */ +#define CAN0_RFH1 0xFFC00A2C /* CAN0 Remote Frame Handling Register 1 */ +#define CAN0_OPSS1 0xFFC00A30 /* CAN0 Overwrite Protection/Single Shot Transmission Register 1 */ +#define CAN0_MC2 0xFFC00A40 /* CAN0 Mailbox Configuration Register 2 */ +#define CAN0_MD2 0xFFC00A44 /* CAN0 Mailbox Direction Register 2 */ +#define CAN0_TRS2 0xFFC00A48 /* CAN0 Transmission Request Set Register 2 */ +#define CAN0_TRR2 0xFFC00A4C /* CAN0 Transmission Request Reset Register 2 */ +#define CAN0_TA2 0xFFC00A50 /* CAN0 Transmission Acknowledge Register 2 */ +#define CAN0_AA2 0xFFC00A54 /* CAN0 Abort Acknowledge Register 2 */ +#define CAN0_RMP2 0xFFC00A58 /* CAN0 Receive Message Pending Register 2 */ +#define CAN0_RML2 0xFFC00A5C /* CAN0 Receive Message Lost Register 2 */ +#define CAN0_MBTIF2 0xFFC00A60 /* CAN0 Mailbox Transmit Interrupt Flag Register 2 */ +#define CAN0_MBRIF2 0xFFC00A64 /* CAN0 Mailbox Receive Interrupt Flag Register 2 */ +#define CAN0_MBIM2 0xFFC00A68 /* CAN0 Mailbox Interrupt Mask Register 2 */ +#define CAN0_RFH2 0xFFC00A6C /* CAN0 Remote Frame Handling Register 2 */ +#define CAN0_OPSS2 0xFFC00A70 /* CAN0 Overwrite Protection/Single Shot Transmission Register 2 */ +#define CAN0_CLOCK 0xFFC00A80 /* CAN0 Clock Register */ +#define CAN0_TIMING 0xFFC00A84 /* CAN0 Timing Register */ +#define CAN0_DEBUG 0xFFC00A88 /* CAN0 Debug Register */ +#define CAN0_STATUS 0xFFC00A8C /* CAN0 Status Register */ +#define CAN0_CEC 0xFFC00A90 /* CAN0 Error Counter Register */ +#define CAN0_GIS 0xFFC00A94 /* CAN0 Global CAN Interrupt Status */ +#define CAN0_GIM 0xFFC00A98 /* CAN0 Global CAN Interrupt Mask */ +#define CAN0_GIF 0xFFC00A9C /* CAN0 Global CAN Interrupt Flag */ +#define CAN0_CONTROL 0xFFC00AA0 /* CAN0 CAN Master Control Register */ +#define CAN0_INTR 0xFFC00AA4 /* CAN0 Interrupt Pending Register */ +#define CAN0_MBTD 0xFFC00AAC /* CAN0 Temporary Mailbox Disable Register */ +#define CAN0_EWR 0xFFC00AB0 /* CAN0 Error Counter Warning Level Register */ +#define CAN0_ESR 0xFFC00AB4 /* CAN0 Error Status Register */ +#define CAN0_UCCNT 0xFFC00AC4 /* CAN0 Universal Counter Register */ +#define CAN0_UCRC 0xFFC00AC8 /* CAN0 Universal Counter Reload/Capture Register */ +#define CAN0_UCCNF 0xFFC00ACC /* CAN0 Universal Counter Configuration Mode Register */ +#define CAN0_AM00L 0xFFC00B00 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM01L 0xFFC00B08 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM02L 0xFFC00B10 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM03L 0xFFC00B18 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM04L 0xFFC00B20 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM05L 0xFFC00B28 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM06L 0xFFC00B30 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM07L 0xFFC00B38 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM08L 0xFFC00B40 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM09L 0xFFC00B48 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM10L 0xFFC00B50 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM11L 0xFFC00B58 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM12L 0xFFC00B60 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM13L 0xFFC00B68 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM14L 0xFFC00B70 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM15L 0xFFC00B78 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM16L 0xFFC00B80 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM17L 0xFFC00B88 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM18L 0xFFC00B90 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM19L 0xFFC00B98 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM20L 0xFFC00BA0 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM21L 0xFFC00BA8 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM22L 0xFFC00BB0 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM23L 0xFFC00BB8 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM24L 0xFFC00BC0 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM25L 0xFFC00BC8 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM26L 0xFFC00BD0 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM27L 0xFFC00BD8 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM28L 0xFFC00BE0 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM29L 0xFFC00BE8 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM30L 0xFFC00BF0 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM31L 0xFFC00BF8 /* CAN0 Acceptance Mask Register (L) */ +#define CAN0_AM00H 0xFFC00B04 /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM01H 0xFFC00B0C /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM02H 0xFFC00B14 /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM03H 0xFFC00B1C /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM04H 0xFFC00B24 /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM05H 0xFFC00B2C /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM06H 0xFFC00B34 /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM07H 0xFFC00B3C /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM08H 0xFFC00B44 /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM09H 0xFFC00B4C /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM10H 0xFFC00B54 /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM11H 0xFFC00B5C /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM12H 0xFFC00B64 /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM13H 0xFFC00B6C /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM14H 0xFFC00B74 /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM15H 0xFFC00B7C /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM16H 0xFFC00B84 /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM17H 0xFFC00B8C /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM18H 0xFFC00B94 /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM19H 0xFFC00B9C /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM20H 0xFFC00BA4 /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM21H 0xFFC00BAC /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM22H 0xFFC00BB4 /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM23H 0xFFC00BBC /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM24H 0xFFC00BC4 /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM25H 0xFFC00BCC /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM26H 0xFFC00BD4 /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM27H 0xFFC00BDC /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM28H 0xFFC00BE4 /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM29H 0xFFC00BEC /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM30H 0xFFC00BF4 /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_AM31H 0xFFC00BFC /* CAN0 Acceptance Mask Register (H) */ +#define CAN0_MB00_DATA0 0xFFC00C00 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB01_DATA0 0xFFC00C20 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB02_DATA0 0xFFC00C40 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB03_DATA0 0xFFC00C60 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB04_DATA0 0xFFC00C80 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB05_DATA0 0xFFC00CA0 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB06_DATA0 0xFFC00CC0 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB07_DATA0 0xFFC00CE0 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB08_DATA0 0xFFC00D00 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB09_DATA0 0xFFC00D20 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB10_DATA0 0xFFC00D40 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB11_DATA0 0xFFC00D60 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB12_DATA0 0xFFC00D80 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB13_DATA0 0xFFC00DA0 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB14_DATA0 0xFFC00DC0 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB15_DATA0 0xFFC00DE0 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB16_DATA0 0xFFC00E00 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB17_DATA0 0xFFC00E20 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB18_DATA0 0xFFC00E40 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB19_DATA0 0xFFC00E60 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB20_DATA0 0xFFC00E80 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB21_DATA0 0xFFC00EA0 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB22_DATA0 0xFFC00EC0 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB23_DATA0 0xFFC00EE0 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB24_DATA0 0xFFC00F00 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB25_DATA0 0xFFC00F20 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB26_DATA0 0xFFC00F40 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB27_DATA0 0xFFC00F60 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB28_DATA0 0xFFC00F80 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB29_DATA0 0xFFC00FA0 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB30_DATA0 0xFFC00FC0 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB31_DATA0 0xFFC00FE0 /* CAN0 Mailbox Word 0 Register */ +#define CAN0_MB00_DATA1 0xFFC00C04 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB01_DATA1 0xFFC00C24 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB02_DATA1 0xFFC00C44 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB03_DATA1 0xFFC00C64 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB04_DATA1 0xFFC00C84 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB05_DATA1 0xFFC00CA4 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB06_DATA1 0xFFC00CC4 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB07_DATA1 0xFFC00CE4 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB08_DATA1 0xFFC00D04 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB09_DATA1 0xFFC00D24 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB10_DATA1 0xFFC00D44 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB11_DATA1 0xFFC00D64 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB12_DATA1 0xFFC00D84 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB13_DATA1 0xFFC00DA4 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB14_DATA1 0xFFC00DC4 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB15_DATA1 0xFFC00DE4 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB16_DATA1 0xFFC00E04 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB17_DATA1 0xFFC00E24 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB18_DATA1 0xFFC00E44 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB19_DATA1 0xFFC00E64 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB20_DATA1 0xFFC00E84 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB21_DATA1 0xFFC00EA4 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB22_DATA1 0xFFC00EC4 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB23_DATA1 0xFFC00EE4 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB24_DATA1 0xFFC00F04 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB25_DATA1 0xFFC00F24 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB26_DATA1 0xFFC00F44 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB27_DATA1 0xFFC00F64 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB28_DATA1 0xFFC00F84 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB29_DATA1 0xFFC00FA4 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB30_DATA1 0xFFC00FC4 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB31_DATA1 0xFFC00FE4 /* CAN0 Mailbox Word 1 Register */ +#define CAN0_MB00_DATA2 0xFFC00C08 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB01_DATA2 0xFFC00C28 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB02_DATA2 0xFFC00C48 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB03_DATA2 0xFFC00C68 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB04_DATA2 0xFFC00C88 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB05_DATA2 0xFFC00CA8 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB06_DATA2 0xFFC00CC8 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB07_DATA2 0xFFC00CE8 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB08_DATA2 0xFFC00D08 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB09_DATA2 0xFFC00D28 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB10_DATA2 0xFFC00D48 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB11_DATA2 0xFFC00D68 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB12_DATA2 0xFFC00D88 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB13_DATA2 0xFFC00DA8 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB14_DATA2 0xFFC00DC8 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB15_DATA2 0xFFC00DE8 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB16_DATA2 0xFFC00E08 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB17_DATA2 0xFFC00E28 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB18_DATA2 0xFFC00E48 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB19_DATA2 0xFFC00E68 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB20_DATA2 0xFFC00E88 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB21_DATA2 0xFFC00EA8 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB22_DATA2 0xFFC00EC8 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB23_DATA2 0xFFC00EE8 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB24_DATA2 0xFFC00F08 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB25_DATA2 0xFFC00F28 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB26_DATA2 0xFFC00F48 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB27_DATA2 0xFFC00F68 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB28_DATA2 0xFFC00F88 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB29_DATA2 0xFFC00FA8 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB30_DATA2 0xFFC00FC8 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB31_DATA2 0xFFC00FE8 /* CAN0 Mailbox Word 2 Register */ +#define CAN0_MB00_DATA3 0xFFC00C0C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB01_DATA3 0xFFC00C2C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB02_DATA3 0xFFC00C4C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB03_DATA3 0xFFC00C6C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB04_DATA3 0xFFC00C8C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB05_DATA3 0xFFC00CAC /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB06_DATA3 0xFFC00CCC /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB07_DATA3 0xFFC00CEC /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB08_DATA3 0xFFC00D0C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB09_DATA3 0xFFC00D2C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB10_DATA3 0xFFC00D4C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB11_DATA3 0xFFC00D6C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB12_DATA3 0xFFC00D8C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB13_DATA3 0xFFC00DAC /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB14_DATA3 0xFFC00DCC /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB15_DATA3 0xFFC00DEC /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB16_DATA3 0xFFC00E0C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB17_DATA3 0xFFC00E2C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB18_DATA3 0xFFC00E4C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB19_DATA3 0xFFC00E6C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB20_DATA3 0xFFC00E8C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB21_DATA3 0xFFC00EAC /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB22_DATA3 0xFFC00ECC /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB23_DATA3 0xFFC00EEC /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB24_DATA3 0xFFC00F0C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB25_DATA3 0xFFC00F2C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB26_DATA3 0xFFC00F4C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB27_DATA3 0xFFC00F6C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB28_DATA3 0xFFC00F8C /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB29_DATA3 0xFFC00FAC /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB30_DATA3 0xFFC00FCC /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB31_DATA3 0xFFC00FEC /* CAN0 Mailbox Word 3 Register */ +#define CAN0_MB00_LENGTH 0xFFC00C10 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB01_LENGTH 0xFFC00C30 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB02_LENGTH 0xFFC00C50 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB03_LENGTH 0xFFC00C70 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB04_LENGTH 0xFFC00C90 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB05_LENGTH 0xFFC00CB0 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB06_LENGTH 0xFFC00CD0 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB07_LENGTH 0xFFC00CF0 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB08_LENGTH 0xFFC00D10 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB09_LENGTH 0xFFC00D30 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB10_LENGTH 0xFFC00D50 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB11_LENGTH 0xFFC00D70 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB12_LENGTH 0xFFC00D90 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB13_LENGTH 0xFFC00DB0 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB14_LENGTH 0xFFC00DD0 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB15_LENGTH 0xFFC00DF0 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB16_LENGTH 0xFFC00E10 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB17_LENGTH 0xFFC00E30 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB18_LENGTH 0xFFC00E50 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB19_LENGTH 0xFFC00E70 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB20_LENGTH 0xFFC00E90 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB21_LENGTH 0xFFC00EB0 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB22_LENGTH 0xFFC00ED0 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB23_LENGTH 0xFFC00EF0 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB24_LENGTH 0xFFC00F10 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB25_LENGTH 0xFFC00F30 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB26_LENGTH 0xFFC00F50 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB27_LENGTH 0xFFC00F70 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB28_LENGTH 0xFFC00F90 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB29_LENGTH 0xFFC00FB0 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB30_LENGTH 0xFFC00FD0 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB31_LENGTH 0xFFC00FF0 /* CAN0 Mailbox Word 4 Register */ +#define CAN0_MB00_TIMESTAMP 0xFFC00C14 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB01_TIMESTAMP 0xFFC00C34 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB02_TIMESTAMP 0xFFC00C54 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB03_TIMESTAMP 0xFFC00C74 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB04_TIMESTAMP 0xFFC00C94 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB05_TIMESTAMP 0xFFC00CB4 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB06_TIMESTAMP 0xFFC00CD4 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB07_TIMESTAMP 0xFFC00CF4 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB08_TIMESTAMP 0xFFC00D14 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB09_TIMESTAMP 0xFFC00D34 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB10_TIMESTAMP 0xFFC00D54 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB11_TIMESTAMP 0xFFC00D74 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB12_TIMESTAMP 0xFFC00D94 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB13_TIMESTAMP 0xFFC00DB4 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB14_TIMESTAMP 0xFFC00DD4 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB15_TIMESTAMP 0xFFC00DF4 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB16_TIMESTAMP 0xFFC00E14 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB17_TIMESTAMP 0xFFC00E34 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB18_TIMESTAMP 0xFFC00E54 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB19_TIMESTAMP 0xFFC00E74 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB20_TIMESTAMP 0xFFC00E94 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB21_TIMESTAMP 0xFFC00EB4 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB22_TIMESTAMP 0xFFC00ED4 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB23_TIMESTAMP 0xFFC00EF4 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB24_TIMESTAMP 0xFFC00F14 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB25_TIMESTAMP 0xFFC00F34 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB26_TIMESTAMP 0xFFC00F54 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB27_TIMESTAMP 0xFFC00F74 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB28_TIMESTAMP 0xFFC00F94 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB29_TIMESTAMP 0xFFC00FB4 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB30_TIMESTAMP 0xFFC00FD4 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB31_TIMESTAMP 0xFFC00FF4 /* CAN0 Mailbox Word 5 Register */ +#define CAN0_MB00_ID0 0xFFC00C18 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB01_ID0 0xFFC00C38 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB02_ID0 0xFFC00C58 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB03_ID0 0xFFC00C78 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB04_ID0 0xFFC00C98 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB05_ID0 0xFFC00CB8 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB06_ID0 0xFFC00CD8 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB07_ID0 0xFFC00CF8 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB08_ID0 0xFFC00D18 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB09_ID0 0xFFC00D38 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB10_ID0 0xFFC00D58 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB11_ID0 0xFFC00D78 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB12_ID0 0xFFC00D98 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB13_ID0 0xFFC00DB8 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB14_ID0 0xFFC00DD8 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB15_ID0 0xFFC00DF8 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB16_ID0 0xFFC00E18 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB17_ID0 0xFFC00E38 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB18_ID0 0xFFC00E58 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB19_ID0 0xFFC00E78 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB20_ID0 0xFFC00E98 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB21_ID0 0xFFC00EB8 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB22_ID0 0xFFC00ED8 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB23_ID0 0xFFC00EF8 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB24_ID0 0xFFC00F18 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB25_ID0 0xFFC00F38 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB26_ID0 0xFFC00F58 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB27_ID0 0xFFC00F78 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB28_ID0 0xFFC00F98 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB29_ID0 0xFFC00FB8 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB30_ID0 0xFFC00FD8 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB31_ID0 0xFFC00FF8 /* CAN0 Mailbox Word 6 Register */ +#define CAN0_MB00_ID1 0xFFC00C1C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB01_ID1 0xFFC00C3C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB02_ID1 0xFFC00C5C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB03_ID1 0xFFC00C7C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB04_ID1 0xFFC00C9C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB05_ID1 0xFFC00CBC /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB06_ID1 0xFFC00CDC /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB07_ID1 0xFFC00CFC /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB08_ID1 0xFFC00D1C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB09_ID1 0xFFC00D3C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB10_ID1 0xFFC00D5C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB11_ID1 0xFFC00D7C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB12_ID1 0xFFC00D9C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB13_ID1 0xFFC00DBC /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB14_ID1 0xFFC00DDC /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB15_ID1 0xFFC00DFC /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB16_ID1 0xFFC00E1C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB17_ID1 0xFFC00E3C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB18_ID1 0xFFC00E5C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB19_ID1 0xFFC00E7C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB20_ID1 0xFFC00E9C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB21_ID1 0xFFC00EBC /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB22_ID1 0xFFC00EDC /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB23_ID1 0xFFC00EFC /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB24_ID1 0xFFC00F1C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB25_ID1 0xFFC00F3C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB26_ID1 0xFFC00F5C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB27_ID1 0xFFC00F7C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB28_ID1 0xFFC00F9C /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB29_ID1 0xFFC00FBC /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB30_ID1 0xFFC00FDC /* CAN0 Mailbox Word 7 Register */ +#define CAN0_MB31_ID1 0xFFC00FFC /* CAN0 Mailbox Word 7 Register */ + +/* ========================= + LINK PORT Registers + ========================= */ +#define LP0_CTL 0xFFC01000 /* LP0 Control Register */ +#define LP0_STAT 0xFFC01004 /* LP0 Status Register */ +#define LP0_DIV 0xFFC01008 /* LP0 Clock Divider Value */ +#define LP0_CNT 0xFFC0100C /* LP0 Current Count Value of Clock Divider */ +#define LP0_TX 0xFFC01010 /* LP0 Transmit Buffer */ +#define LP0_RX 0xFFC01014 /* LP0 Receive Buffer */ +#define LP0_TXIN_SHDW 0xFFC01018 /* LP0 Shadow Input Transmit Buffer */ +#define LP0_TXOUT_SHDW 0xFFC0101C /* LP0 Shadow Output Transmit Buffer */ +#define LP1_CTL 0xFFC01100 /* LP1 Control Register */ +#define LP1_STAT 0xFFC01104 /* LP1 Status Register */ +#define LP1_DIV 0xFFC01108 /* LP1 Clock Divider Value */ +#define LP1_CNT 0xFFC0110C /* LP1 Current Count Value of Clock Divider */ +#define LP1_TX 0xFFC01110 /* LP1 Transmit Buffer */ +#define LP1_RX 0xFFC01114 /* LP1 Receive Buffer */ +#define LP1_TXIN_SHDW 0xFFC01118 /* LP1 Shadow Input Transmit Buffer */ +#define LP1_TXOUT_SHDW 0xFFC0111C /* LP1 Shadow Output Transmit Buffer */ +#define LP2_CTL 0xFFC01200 /* LP2 Control Register */ +#define LP2_STAT 0xFFC01204 /* LP2 Status Register */ +#define LP2_DIV 0xFFC01208 /* LP2 Clock Divider Value */ +#define LP2_CNT 0xFFC0120C /* LP2 Current Count Value of Clock Divider */ +#define LP2_TX 0xFFC01210 /* LP2 Transmit Buffer */ +#define LP2_RX 0xFFC01214 /* LP2 Receive Buffer */ +#define LP2_TXIN_SHDW 0xFFC01218 /* LP2 Shadow Input Transmit Buffer */ +#define LP2_TXOUT_SHDW 0xFFC0121C /* LP2 Shadow Output Transmit Buffer */ +#define LP3_CTL 0xFFC01300 /* LP3 Control Register */ +#define LP3_STAT 0xFFC01304 /* LP3 Status Register */ +#define LP3_DIV 0xFFC01308 /* LP3 Clock Divider Value */ +#define LP3_CNT 0xFFC0130C /* LP3 Current Count Value of Clock Divider */ +#define LP3_TX 0xFFC01310 /* LP3 Transmit Buffer */ +#define LP3_RX 0xFFC01314 /* LP3 Receive Buffer */ +#define LP3_TXIN_SHDW 0xFFC01318 /* LP3 Shadow Input Transmit Buffer */ +#define LP3_TXOUT_SHDW 0xFFC0131C /* LP3 Shadow Output Transmit Buffer */ + +/* ========================= + TIMER Registers + ========================= */ +#define TIMER_REVID 0xFFC01400 /* GPTIMER Timer IP Version ID */ +#define TIMER_RUN 0xFFC01404 /* GPTIMER Timer Run Register */ +#define TIMER_RUN_SET 0xFFC01408 /* GPTIMER Run Register Alias to Set */ +#define TIMER_RUN_CLR 0xFFC0140C /* GPTIMER Run Register Alias to Clear */ +#define TIMER_STOP_CFG 0xFFC01410 /* GPTIMER Stop Config Register */ +#define TIMER_STOP_CFG_SET 0xFFC01414 /* GPTIMER Stop Config Alias to Set */ +#define TIMER_STOP_CFG_CLR 0xFFC01418 /* GPTIMER Stop Config Alias to Clear */ +#define TIMER_DATA_IMSK 0xFFC0141C /* GPTIMER Data Interrupt Mask register */ +#define TIMER_STAT_IMSK 0xFFC01420 /* GPTIMER Status Interrupt Mask register */ +#define TIMER_TRG_MSK 0xFFC01424 /* GPTIMER Output Trigger Mask register */ +#define TIMER_TRG_IE 0xFFC01428 /* GPTIMER Slave Trigger Enable register */ +#define TIMER_DATA_ILAT 0xFFC0142C /* GPTIMER Data Interrupt Register */ +#define TIMER_STAT_ILAT 0xFFC01430 /* GPTIMER Status (Error) Interrupt Register */ +#define TIMER_ERR_TYPE 0xFFC01434 /* GPTIMER Register Indicating Type of Error */ +#define TIMER_BCAST_PER 0xFFC01438 /* GPTIMER Broadcast Period */ +#define TIMER_BCAST_WID 0xFFC0143C /* GPTIMER Broadcast Width */ +#define TIMER_BCAST_DLY 0xFFC01440 /* GPTIMER Broadcast Delay */ + +/* ========================= + TIMER0~7 + ========================= */ +#define TIMER0_CONFIG 0xFFC01460 /* TIMER0 Per Timer Config Register */ +#define TIMER0_COUNTER 0xFFC01464 /* TIMER0 Per Timer Counter Register */ +#define TIMER0_PERIOD 0xFFC01468 /* TIMER0 Per Timer Period Register */ +#define TIMER0_WIDTH 0xFFC0146C /* TIMER0 Per Timer Width Register */ +#define TIMER0_DELAY 0xFFC01470 /* TIMER0 Per Timer Delay Register */ + +#define TIMER1_CONFIG 0xFFC01480 /* TIMER1 Per Timer Config Register */ +#define TIMER1_COUNTER 0xFFC01484 /* TIMER1 Per Timer Counter Register */ +#define TIMER1_PERIOD 0xFFC01488 /* TIMER1 Per Timer Period Register */ +#define TIMER1_WIDTH 0xFFC0148C /* TIMER1 Per Timer Width Register */ +#define TIMER1_DELAY 0xFFC01490 /* TIMER1 Per Timer Delay Register */ + +#define TIMER2_CONFIG 0xFFC014A0 /* TIMER2 Per Timer Config Register */ +#define TIMER2_COUNTER 0xFFC014A4 /* TIMER2 Per Timer Counter Register */ +#define TIMER2_PERIOD 0xFFC014A8 /* TIMER2 Per Timer Period Register */ +#define TIMER2_WIDTH 0xFFC014AC /* TIMER2 Per Timer Width Register */ +#define TIMER2_DELAY 0xFFC014B0 /* TIMER2 Per Timer Delay Register */ + +#define TIMER3_CONFIG 0xFFC014C0 /* TIMER3 Per Timer Config Register */ +#define TIMER3_COUNTER 0xFFC014C4 /* TIMER3 Per Timer Counter Register */ +#define TIMER3_PERIOD 0xFFC014C8 /* TIMER3 Per Timer Period Register */ +#define TIMER3_WIDTH 0xFFC014CC /* TIMER3 Per Timer Width Register */ +#define TIMER3_DELAY 0xFFC014D0 /* TIMER3 Per Timer Delay Register */ + +#define TIMER4_CONFIG 0xFFC014E0 /* TIMER4 Per Timer Config Register */ +#define TIMER4_COUNTER 0xFFC014E4 /* TIMER4 Per Timer Counter Register */ +#define TIMER4_PERIOD 0xFFC014E8 /* TIMER4 Per Timer Period Register */ +#define TIMER4_WIDTH 0xFFC014EC /* TIMER4 Per Timer Width Register */ +#define TIMER4_DELAY 0xFFC014F0 /* TIMER4 Per Timer Delay Register */ + +#define TIMER5_CONFIG 0xFFC01500 /* TIMER5 Per Timer Config Register */ +#define TIMER5_COUNTER 0xFFC01504 /* TIMER5 Per Timer Counter Register */ +#define TIMER5_PERIOD 0xFFC01508 /* TIMER5 Per Timer Period Register */ +#define TIMER5_WIDTH 0xFFC0150C /* TIMER5 Per Timer Width Register */ +#define TIMER5_DELAY 0xFFC01510 /* TIMER5 Per Timer Delay Register */ + +#define TIMER6_CONFIG 0xFFC01520 /* TIMER6 Per Timer Config Register */ +#define TIMER6_COUNTER 0xFFC01524 /* TIMER6 Per Timer Counter Register */ +#define TIMER6_PERIOD 0xFFC01528 /* TIMER6 Per Timer Period Register */ +#define TIMER6_WIDTH 0xFFC0152C /* TIMER6 Per Timer Width Register */ +#define TIMER6_DELAY 0xFFC01530 /* TIMER6 Per Timer Delay Register */ + +#define TIMER7_CONFIG 0xFFC01540 /* TIMER7 Per Timer Config Register */ +#define TIMER7_COUNTER 0xFFC01544 /* TIMER7 Per Timer Counter Register */ +#define TIMER7_PERIOD 0xFFC01548 /* TIMER7 Per Timer Period Register */ +#define TIMER7_WIDTH 0xFFC0154C /* TIMER7 Per Timer Width Register */ +#define TIMER7_DELAY 0xFFC01550 /* TIMER7 Per Timer Delay Register */ + +/* ========================= + CRC Registers + ========================= */ + +/* ========================= + CRC0 + ========================= */ +#define REG_CRC0_CTL 0xFFC01C00 /* CRC0 Control Register */ +#define REG_CRC0_DCNT 0xFFC01C04 /* CRC0 Data Word Count Register */ +#define REG_CRC0_DCNTRLD 0xFFC01C08 /* CRC0 Data Word Count Reload Register */ +#define REG_CRC0_COMP 0xFFC01C14 /* CRC0 DATA Compare Register */ +#define REG_CRC0_FILLVAL 0xFFC01C18 /* CRC0 Fill Value Register */ +#define REG_CRC0_DFIFO 0xFFC01C1C /* CRC0 DATA FIFO Register */ +#define REG_CRC0_INEN 0xFFC01C20 /* CRC0 Interrupt Enable Register */ +#define REG_CRC0_INEN_SET 0xFFC01C24 /* CRC0 Interrupt Enable Set Register */ +#define REG_CRC0_INEN_CLR 0xFFC01C28 /* CRC0 Interrupt Enable Clear Register */ +#define REG_CRC0_POLY 0xFFC01C2C /* CRC0 Polynomial Register */ +#define REG_CRC0_STAT 0xFFC01C40 /* CRC0 Status Register */ +#define REG_CRC0_DCNTCAP 0xFFC01C44 /* CRC0 DATA Count Capture Register */ +#define REG_CRC0_RESULT_FIN 0xFFC01C4C /* CRC0 Final CRC Result Register */ +#define REG_CRC0_RESULT_CUR 0xFFC01C50 /* CRC0 Current CRC Result Register */ +#define REG_CRC0_REVID 0xFFC01C60 /* CRC0 Revision ID Register */ + +/* ========================= + CRC1 + ========================= */ +#define REG_CRC1_CTL 0xFFC01D00 /* CRC1 Control Register */ +#define REG_CRC1_DCNT 0xFFC01D04 /* CRC1 Data Word Count Register */ +#define REG_CRC1_DCNTRLD 0xFFC01D08 /* CRC1 Data Word Count Reload Register */ +#define REG_CRC1_COMP 0xFFC01D14 /* CRC1 DATA Compare Register */ +#define REG_CRC1_FILLVAL 0xFFC01D18 /* CRC1 Fill Value Register */ +#define REG_CRC1_DFIFO 0xFFC01D1C /* CRC1 DATA FIFO Register */ +#define REG_CRC1_INEN 0xFFC01D20 /* CRC1 Interrupt Enable Register */ +#define REG_CRC1_INEN_SET 0xFFC01D24 /* CRC1 Interrupt Enable Set Register */ +#define REG_CRC1_INEN_CLR 0xFFC01D28 /* CRC1 Interrupt Enable Clear Register */ +#define REG_CRC1_POLY 0xFFC01D2C /* CRC1 Polynomial Register */ +#define REG_CRC1_STAT 0xFFC01D40 /* CRC1 Status Register */ +#define REG_CRC1_DCNTCAP 0xFFC01D44 /* CRC1 DATA Count Capture Register */ +#define REG_CRC1_RESULT_FIN 0xFFC01D4C /* CRC1 Final CRC Result Register */ +#define REG_CRC1_RESULT_CUR 0xFFC01D50 /* CRC1 Current CRC Result Register */ +#define REG_CRC1_REVID 0xFFC01D60 /* CRC1 Revision ID Register */ + +/* ========================= + TWI Registers + ========================= */ + +/* ========================= + TWI0 + ========================= */ +#define TWI0_CLKDIV 0xFFC01E00 /* TWI0 SCL Clock Divider */ +#define TWI0_CONTROL 0xFFC01E04 /* TWI0 Control Register */ +#define TWI0_SLAVE_CTL 0xFFC01E08 /* TWI0 Slave Mode Control Register */ +#define TWI0_SLAVE_STAT 0xFFC01E0C /* TWI0 Slave Mode Status Register */ +#define TWI0_SLAVE_ADDR 0xFFC01E10 /* TWI0 Slave Mode Address Register */ +#define TWI0_MASTER_CTL 0xFFC01E14 /* TWI0 Master Mode Control Registers */ +#define TWI0_MASTER_STAT 0xFFC01E18 /* TWI0 Master Mode Status Register */ +#define TWI0_MASTER_ADDR 0xFFC01E1C /* TWI0 Master Mode Address Register */ +#define TWI0_INT_STAT 0xFFC01E20 /* TWI0 Interrupt Status Register */ +#define TWI0_INT_MASK 0xFFC01E24 /* TWI0 Interrupt Mask Register */ +#define TWI0_FIFO_CTL 0xFFC01E28 /* TWI0 FIFO Control Register */ +#define TWI0_FIFO_STAT 0xFFC01E2C /* TWI0 FIFO Status Register */ +#define TWI0_XMT_DATA8 0xFFC01E80 /* TWI0 FIFO Transmit Data Single-Byte Register */ +#define TWI0_XMT_DATA16 0xFFC01E84 /* TWI0 FIFO Transmit Data Double-Byte Register */ +#define TWI0_RCV_DATA8 0xFFC01E88 /* TWI0 FIFO Transmit Data Single-Byte Register */ +#define TWI0_RCV_DATA16 0xFFC01E8C /* TWI0 FIFO Transmit Data Double-Byte Register */ + +/* ========================= + TWI1 + ========================= */ +#define TWI1_CLKDIV 0xFFC01F00 /* TWI1 SCL Clock Divider */ +#define TWI1_CONTROL 0xFFC01F04 /* TWI1 Control Register */ +#define TWI1_SLAVE_CTL 0xFFC01F08 /* TWI1 Slave Mode Control Register */ +#define TWI1_SLAVE_STAT 0xFFC01F0C /* TWI1 Slave Mode Status Register */ +#define TWI1_SLAVE_ADDR 0xFFC01F10 /* TWI1 Slave Mode Address Register */ +#define TWI1_MASTER_CTL 0xFFC01F14 /* TWI1 Master Mode Control Registers */ +#define TWI1_MASTER_STAT 0xFFC01F18 /* TWI1 Master Mode Status Register */ +#define TWI1_MASTER_ADDR 0xFFC01F1C /* TWI1 Master Mode Address Register */ +#define TWI1_INT_STAT 0xFFC01F20 /* TWI1 Interrupt Status Register */ +#define TWI1_INT_MASK 0xFFC01F24 /* TWI1 Interrupt Mask Register */ +#define TWI1_FIFO_CTL 0xFFC01F28 /* TWI1 FIFO Control Register */ +#define TWI1_FIFO_STAT 0xFFC01F2C /* TWI1 FIFO Status Register */ +#define TWI1_XMT_DATA8 0xFFC01F80 /* TWI1 FIFO Transmit Data Single-Byte Register */ +#define TWI1_XMT_DATA16 0xFFC01F84 /* TWI1 FIFO Transmit Data Double-Byte Register */ +#define TWI1_RCV_DATA8 0xFFC01F88 /* TWI1 FIFO Transmit Data Single-Byte Register */ +#define TWI1_RCV_DATA16 0xFFC01F8C /* TWI1 FIFO Transmit Data Double-Byte Register */ + + +/* ========================= + UART Registers + ========================= */ + +/* ========================= + UART0 + ========================= */ +#define UART0_REVID 0xFFC02000 /* UART0 Revision ID Register */ +#define UART0_CTL 0xFFC02004 /* UART0 Control Register */ +#define UART0_STAT 0xFFC02008 /* UART0 Status Register */ +#define UART0_SCR 0xFFC0200C /* UART0 Scratch Register */ +#define UART0_CLK 0xFFC02010 /* UART0 Clock Rate Register */ +#define UART0_IER 0xFFC02014 /* UART0 Interrupt Mask Register */ +#define UART0_IER_SET 0xFFC02018 /* UART0 Interrupt Mask Set Register */ +#define UART0_IER_CLR 0xFFC0201C /* UART0 Interrupt Mask Clear Register */ +#define UART0_RBR 0xFFC02020 /* UART0 Receive Buffer Register */ +#define UART0_THR 0xFFC02024 /* UART0 Transmit Hold Register */ +#define UART0_TAIP 0xFFC02028 /* UART0 Transmit Address/Insert Pulse Register */ +#define UART0_TSR 0xFFC0202C /* UART0 Transmit Shift Register */ +#define UART0_RSR 0xFFC02030 /* UART0 Receive Shift Register */ +#define UART0_TXDIV 0xFFC02034 /* UART0 Transmit Clock Devider Register */ +#define UART0_RXDIV 0xFFC02038 /* UART0 Receive Clock Devider Register */ + +/* ========================= + UART1 + ========================= */ +#define UART1_REVID 0xFFC02400 /* UART1 Revision ID Register */ +#define UART1_CTL 0xFFC02404 /* UART1 Control Register */ +#define UART1_STAT 0xFFC02408 /* UART1 Status Register */ +#define UART1_SCR 0xFFC0240C /* UART1 Scratch Register */ +#define UART1_CLK 0xFFC02410 /* UART1 Clock Rate Register */ +#define UART1_IER 0xFFC02414 /* UART1 Interrupt Mask Register */ +#define UART1_IER_SET 0xFFC02418 /* UART1 Interrupt Mask Set Register */ +#define UART1_IER_CLR 0xFFC0241C /* UART1 Interrupt Mask Clear Register */ +#define UART1_RBR 0xFFC02420 /* UART1 Receive Buffer Register */ +#define UART1_THR 0xFFC02424 /* UART1 Transmit Hold Register */ +#define UART1_TAIP 0xFFC02428 /* UART1 Transmit Address/Insert Pulse Register */ +#define UART1_TSR 0xFFC0242C /* UART1 Transmit Shift Register */ +#define UART1_RSR 0xFFC02430 /* UART1 Receive Shift Register */ +#define UART1_TXDIV 0xFFC02434 /* UART1 Transmit Clock Devider Register */ +#define UART1_RXDIV 0xFFC02438 /* UART1 Receive Clock Devider Register */ + + +/* ========================= + PORT Registers + ========================= */ + +/* ========================= + PORTA + ========================= */ +#define PORTA_FER 0xFFC03000 /* PORTA Port x Function Enable Register */ +#define PORTA_FER_SET 0xFFC03004 /* PORTA Port x Function Enable Set Register */ +#define PORTA_FER_CLEAR 0xFFC03008 /* PORTA Port x Function Enable Clear Register */ +#define PORTA_DATA 0xFFC0300C /* PORTA Port x GPIO Data Register */ +#define PORTA_DATA_SET 0xFFC03010 /* PORTA Port x GPIO Data Set Register */ +#define PORTA_DATA_CLEAR 0xFFC03014 /* PORTA Port x GPIO Data Clear Register */ +#define PORTA_DIR 0xFFC03018 /* PORTA Port x GPIO Direction Register */ +#define PORTA_DIR_SET 0xFFC0301C /* PORTA Port x GPIO Direction Set Register */ +#define PORTA_DIR_CLEAR 0xFFC03020 /* PORTA Port x GPIO Direction Clear Register */ +#define PORTA_INEN 0xFFC03024 /* PORTA Port x GPIO Input Enable Register */ +#define PORTA_INEN_SET 0xFFC03028 /* PORTA Port x GPIO Input Enable Set Register */ +#define PORTA_INEN_CLEAR 0xFFC0302C /* PORTA Port x GPIO Input Enable Clear Register */ +#define PORTA_MUX 0xFFC03030 /* PORTA Port x Multiplexer Control Register */ +#define PORTA_DATA_TGL 0xFFC03034 /* PORTA Port x GPIO Input Enable Toggle Register */ +#define PORTA_POL 0xFFC03038 /* PORTA Port x GPIO Programming Inversion Register */ +#define PORTA_POL_SET 0xFFC0303C /* PORTA Port x GPIO Programming Inversion Set Register */ +#define PORTA_POL_CLEAR 0xFFC03040 /* PORTA Port x GPIO Programming Inversion Clear Register */ +#define PORTA_LOCK 0xFFC03044 /* PORTA Port x GPIO Lock Register */ +#define PORTA_REVID 0xFFC0307C /* PORTA Port x GPIO Revision ID */ + +/* ========================= + PORTB + ========================= */ +#define PORTB_FER 0xFFC03080 /* PORTB Port x Function Enable Register */ +#define PORTB_FER_SET 0xFFC03084 /* PORTB Port x Function Enable Set Register */ +#define PORTB_FER_CLEAR 0xFFC03088 /* PORTB Port x Function Enable Clear Register */ +#define PORTB_DATA 0xFFC0308C /* PORTB Port x GPIO Data Register */ +#define PORTB_DATA_SET 0xFFC03090 /* PORTB Port x GPIO Data Set Register */ +#define PORTB_DATA_CLEAR 0xFFC03094 /* PORTB Port x GPIO Data Clear Register */ +#define PORTB_DIR 0xFFC03098 /* PORTB Port x GPIO Direction Register */ +#define PORTB_DIR_SET 0xFFC0309C /* PORTB Port x GPIO Direction Set Register */ +#define PORTB_DIR_CLEAR 0xFFC030A0 /* PORTB Port x GPIO Direction Clear Register */ +#define PORTB_INEN 0xFFC030A4 /* PORTB Port x GPIO Input Enable Register */ +#define PORTB_INEN_SET 0xFFC030A8 /* PORTB Port x GPIO Input Enable Set Register */ +#define PORTB_INEN_CLEAR 0xFFC030AC /* PORTB Port x GPIO Input Enable Clear Register */ +#define PORTB_MUX 0xFFC030B0 /* PORTB Port x Multiplexer Control Register */ +#define PORTB_DATA_TGL 0xFFC030B4 /* PORTB Port x GPIO Input Enable Toggle Register */ +#define PORTB_POL 0xFFC030B8 /* PORTB Port x GPIO Programming Inversion Register */ +#define PORTB_POL_SET 0xFFC030BC /* PORTB Port x GPIO Programming Inversion Set Register */ +#define PORTB_POL_CLEAR 0xFFC030C0 /* PORTB Port x GPIO Programming Inversion Clear Register */ +#define PORTB_LOCK 0xFFC030C4 /* PORTB Port x GPIO Lock Register */ +#define PORTB_REVID 0xFFC030FC /* PORTB Port x GPIO Revision ID */ + +/* ========================= + PORTC + ========================= */ +#define PORTC_FER 0xFFC03100 /* PORTC Port x Function Enable Register */ +#define PORTC_FER_SET 0xFFC03104 /* PORTC Port x Function Enable Set Register */ +#define PORTC_FER_CLEAR 0xFFC03108 /* PORTC Port x Function Enable Clear Register */ +#define PORTC_DATA 0xFFC0310C /* PORTC Port x GPIO Data Register */ +#define PORTC_DATA_SET 0xFFC03110 /* PORTC Port x GPIO Data Set Register */ +#define PORTC_DATA_CLEAR 0xFFC03114 /* PORTC Port x GPIO Data Clear Register */ +#define PORTC_DIR 0xFFC03118 /* PORTC Port x GPIO Direction Register */ +#define PORTC_DIR_SET 0xFFC0311C /* PORTC Port x GPIO Direction Set Register */ +#define PORTC_DIR_CLEAR 0xFFC03120 /* PORTC Port x GPIO Direction Clear Register */ +#define PORTC_INEN 0xFFC03124 /* PORTC Port x GPIO Input Enable Register */ +#define PORTC_INEN_SET 0xFFC03128 /* PORTC Port x GPIO Input Enable Set Register */ +#define PORTC_INEN_CLEAR 0xFFC0312C /* PORTC Port x GPIO Input Enable Clear Register */ +#define PORTC_MUX 0xFFC03130 /* PORTC Port x Multiplexer Control Register */ +#define PORTC_DATA_TGL 0xFFC03134 /* PORTC Port x GPIO Input Enable Toggle Register */ +#define PORTC_POL 0xFFC03138 /* PORTC Port x GPIO Programming Inversion Register */ +#define PORTC_POL_SET 0xFFC0313C /* PORTC Port x GPIO Programming Inversion Set Register */ +#define PORTC_POL_CLEAR 0xFFC03140 /* PORTC Port x GPIO Programming Inversion Clear Register */ +#define PORTC_LOCK 0xFFC03144 /* PORTC Port x GPIO Lock Register */ +#define PORTC_REVID 0xFFC0317C /* PORTC Port x GPIO Revision ID */ + +/* ========================= + PORTD + ========================= */ +#define PORTD_FER 0xFFC03180 /* PORTD Port x Function Enable Register */ +#define PORTD_FER_SET 0xFFC03184 /* PORTD Port x Function Enable Set Register */ +#define PORTD_FER_CLEAR 0xFFC03188 /* PORTD Port x Function Enable Clear Register */ +#define PORTD_DATA 0xFFC0318C /* PORTD Port x GPIO Data Register */ +#define PORTD_DATA_SET 0xFFC03190 /* PORTD Port x GPIO Data Set Register */ +#define PORTD_DATA_CLEAR 0xFFC03194 /* PORTD Port x GPIO Data Clear Register */ +#define PORTD_DIR 0xFFC03198 /* PORTD Port x GPIO Direction Register */ +#define PORTD_DIR_SET 0xFFC0319C /* PORTD Port x GPIO Direction Set Register */ +#define PORTD_DIR_CLEAR 0xFFC031A0 /* PORTD Port x GPIO Direction Clear Register */ +#define PORTD_INEN 0xFFC031A4 /* PORTD Port x GPIO Input Enable Register */ +#define PORTD_INEN_SET 0xFFC031A8 /* PORTD Port x GPIO Input Enable Set Register */ +#define PORTD_INEN_CLEAR 0xFFC031AC /* PORTD Port x GPIO Input Enable Clear Register */ +#define PORTD_MUX 0xFFC031B0 /* PORTD Port x Multiplexer Control Register */ +#define PORTD_DATA_TGL 0xFFC031B4 /* PORTD Port x GPIO Input Enable Toggle Register */ +#define PORTD_POL 0xFFC031B8 /* PORTD Port x GPIO Programming Inversion Register */ +#define PORTD_POL_SET 0xFFC031BC /* PORTD Port x GPIO Programming Inversion Set Register */ +#define PORTD_POL_CLEAR 0xFFC031C0 /* PORTD Port x GPIO Programming Inversion Clear Register */ +#define PORTD_LOCK 0xFFC031C4 /* PORTD Port x GPIO Lock Register */ +#define PORTD_REVID 0xFFC031FC /* PORTD Port x GPIO Revision ID */ + +/* ========================= + PORTE + ========================= */ +#define PORTE_FER 0xFFC03200 /* PORTE Port x Function Enable Register */ +#define PORTE_FER_SET 0xFFC03204 /* PORTE Port x Function Enable Set Register */ +#define PORTE_FER_CLEAR 0xFFC03208 /* PORTE Port x Function Enable Clear Register */ +#define PORTE_DATA 0xFFC0320C /* PORTE Port x GPIO Data Register */ +#define PORTE_DATA_SET 0xFFC03210 /* PORTE Port x GPIO Data Set Register */ +#define PORTE_DATA_CLEAR 0xFFC03214 /* PORTE Port x GPIO Data Clear Register */ +#define PORTE_DIR 0xFFC03218 /* PORTE Port x GPIO Direction Register */ +#define PORTE_DIR_SET 0xFFC0321C /* PORTE Port x GPIO Direction Set Register */ +#define PORTE_DIR_CLEAR 0xFFC03220 /* PORTE Port x GPIO Direction Clear Register */ +#define PORTE_INEN 0xFFC03224 /* PORTE Port x GPIO Input Enable Register */ +#define PORTE_INEN_SET 0xFFC03228 /* PORTE Port x GPIO Input Enable Set Register */ +#define PORTE_INEN_CLEAR 0xFFC0322C /* PORTE Port x GPIO Input Enable Clear Register */ +#define PORTE_MUX 0xFFC03230 /* PORTE Port x Multiplexer Control Register */ +#define PORTE_DATA_TGL 0xFFC03234 /* PORTE Port x GPIO Input Enable Toggle Register */ +#define PORTE_POL 0xFFC03238 /* PORTE Port x GPIO Programming Inversion Register */ +#define PORTE_POL_SET 0xFFC0323C /* PORTE Port x GPIO Programming Inversion Set Register */ +#define PORTE_POL_CLEAR 0xFFC03240 /* PORTE Port x GPIO Programming Inversion Clear Register */ +#define PORTE_LOCK 0xFFC03244 /* PORTE Port x GPIO Lock Register */ +#define PORTE_REVID 0xFFC0327C /* PORTE Port x GPIO Revision ID */ + +/* ========================= + PORTF + ========================= */ +#define PORTF_FER 0xFFC03280 /* PORTF Port x Function Enable Register */ +#define PORTF_FER_SET 0xFFC03284 /* PORTF Port x Function Enable Set Register */ +#define PORTF_FER_CLEAR 0xFFC03288 /* PORTF Port x Function Enable Clear Register */ +#define PORTF_DATA 0xFFC0328C /* PORTF Port x GPIO Data Register */ +#define PORTF_DATA_SET 0xFFC03290 /* PORTF Port x GPIO Data Set Register */ +#define PORTF_DATA_CLEAR 0xFFC03294 /* PORTF Port x GPIO Data Clear Register */ +#define PORTF_DIR 0xFFC03298 /* PORTF Port x GPIO Direction Register */ +#define PORTF_DIR_SET 0xFFC0329C /* PORTF Port x GPIO Direction Set Register */ +#define PORTF_DIR_CLEAR 0xFFC032A0 /* PORTF Port x GPIO Direction Clear Register */ +#define PORTF_INEN 0xFFC032A4 /* PORTF Port x GPIO Input Enable Register */ +#define PORTF_INEN_SET 0xFFC032A8 /* PORTF Port x GPIO Input Enable Set Register */ +#define PORTF_INEN_CLEAR 0xFFC032AC /* PORTF Port x GPIO Input Enable Clear Register */ +#define PORTF_MUX 0xFFC032B0 /* PORTF Port x Multiplexer Control Register */ +#define PORTF_DATA_TGL 0xFFC032B4 /* PORTF Port x GPIO Input Enable Toggle Register */ +#define PORTF_POL 0xFFC032B8 /* PORTF Port x GPIO Programming Inversion Register */ +#define PORTF_POL_SET 0xFFC032BC /* PORTF Port x GPIO Programming Inversion Set Register */ +#define PORTF_POL_CLEAR 0xFFC032C0 /* PORTF Port x GPIO Programming Inversion Clear Register */ +#define PORTF_LOCK 0xFFC032C4 /* PORTF Port x GPIO Lock Register */ +#define PORTF_REVID 0xFFC032FC /* PORTF Port x GPIO Revision ID */ + +/* ========================= + PORTG + ========================= */ +#define PORTG_FER 0xFFC03300 /* PORTG Port x Function Enable Register */ +#define PORTG_FER_SET 0xFFC03304 /* PORTG Port x Function Enable Set Register */ +#define PORTG_FER_CLEAR 0xFFC03308 /* PORTG Port x Function Enable Clear Register */ +#define PORTG_DATA 0xFFC0330C /* PORTG Port x GPIO Data Register */ +#define PORTG_DATA_SET 0xFFC03310 /* PORTG Port x GPIO Data Set Register */ +#define PORTG_DATA_CLEAR 0xFFC03314 /* PORTG Port x GPIO Data Clear Register */ +#define PORTG_DIR 0xFFC03318 /* PORTG Port x GPIO Direction Register */ +#define PORTG_DIR_SET 0xFFC0331C /* PORTG Port x GPIO Direction Set Register */ +#define PORTG_DIR_CLEAR 0xFFC03320 /* PORTG Port x GPIO Direction Clear Register */ +#define PORTG_INEN 0xFFC03324 /* PORTG Port x GPIO Input Enable Register */ +#define PORTG_INEN_SET 0xFFC03328 /* PORTG Port x GPIO Input Enable Set Register */ +#define PORTG_INEN_CLEAR 0xFFC0332C /* PORTG Port x GPIO Input Enable Clear Register */ +#define PORTG_MUX 0xFFC03330 /* PORTG Port x Multiplexer Control Register */ +#define PORTG_DATA_TGL 0xFFC03334 /* PORTG Port x GPIO Input Enable Toggle Register */ +#define PORTG_POL 0xFFC03338 /* PORTG Port x GPIO Programming Inversion Register */ +#define PORTG_POL_SET 0xFFC0333C /* PORTG Port x GPIO Programming Inversion Set Register */ +#define PORTG_POL_CLEAR 0xFFC03340 /* PORTG Port x GPIO Programming Inversion Clear Register */ +#define PORTG_LOCK 0xFFC03344 /* PORTG Port x GPIO Lock Register */ +#define PORTG_REVID 0xFFC0337C /* PORTG Port x GPIO Revision ID */ + +/* ================================================== + Pads Controller Registers + ================================================== */ + +/* ========================= + PADS0 + ========================= */ +#define PADS0_EMAC_PTP_CLKSEL 0xFFC03404 /* PADS0 Clock Selection for EMAC and PTP */ +#define PADS0_TWI_VSEL 0xFFC03408 /* PADS0 TWI Voltage Selection */ +#define PADS0_PORTS_HYST 0xFFC03440 /* PADS0 Hysteresis Enable Register */ + +/* ========================= + PINT Registers + ========================= */ + +/* ========================= + PINT0 + ========================= */ +#define PINT0_MASK_SET 0xFFC04000 /* PINT0 Pint Mask Set Register */ +#define PINT0_MASK_CLEAR 0xFFC04004 /* PINT0 Pint Mask Clear Register */ +#define PINT0_REQUEST 0xFFC04008 /* PINT0 Pint Request Register */ +#define PINT0_ASSIGN 0xFFC0400C /* PINT0 Pint Assign Register */ +#define PINT0_EDGE_SET 0xFFC04010 /* PINT0 Pint Edge Set Register */ +#define PINT0_EDGE_CLEAR 0xFFC04014 /* PINT0 Pint Edge Clear Register */ +#define PINT0_INVERT_SET 0xFFC04018 /* PINT0 Pint Invert Set Register */ +#define PINT0_INVERT_CLEAR 0xFFC0401C /* PINT0 Pint Invert Clear Register */ +#define PINT0_PINSTATE 0xFFC04020 /* PINT0 Pint Pinstate Register */ +#define PINT0_LATCH 0xFFC04024 /* PINT0 Pint Latch Register */ + +/* ========================= + PINT1 + ========================= */ +#define PINT1_MASK_SET 0xFFC04100 /* PINT1 Pint Mask Set Register */ +#define PINT1_MASK_CLEAR 0xFFC04104 /* PINT1 Pint Mask Clear Register */ +#define PINT1_REQUEST 0xFFC04108 /* PINT1 Pint Request Register */ +#define PINT1_ASSIGN 0xFFC0410C /* PINT1 Pint Assign Register */ +#define PINT1_EDGE_SET 0xFFC04110 /* PINT1 Pint Edge Set Register */ +#define PINT1_EDGE_CLEAR 0xFFC04114 /* PINT1 Pint Edge Clear Register */ +#define PINT1_INVERT_SET 0xFFC04118 /* PINT1 Pint Invert Set Register */ +#define PINT1_INVERT_CLEAR 0xFFC0411C /* PINT1 Pint Invert Clear Register */ +#define PINT1_PINSTATE 0xFFC04120 /* PINT1 Pint Pinstate Register */ +#define PINT1_LATCH 0xFFC04124 /* PINT1 Pint Latch Register */ + +/* ========================= + PINT2 + ========================= */ +#define PINT2_MASK_SET 0xFFC04200 /* PINT2 Pint Mask Set Register */ +#define PINT2_MASK_CLEAR 0xFFC04204 /* PINT2 Pint Mask Clear Register */ +#define PINT2_REQUEST 0xFFC04208 /* PINT2 Pint Request Register */ +#define PINT2_ASSIGN 0xFFC0420C /* PINT2 Pint Assign Register */ +#define PINT2_EDGE_SET 0xFFC04210 /* PINT2 Pint Edge Set Register */ +#define PINT2_EDGE_CLEAR 0xFFC04214 /* PINT2 Pint Edge Clear Register */ +#define PINT2_INVERT_SET 0xFFC04218 /* PINT2 Pint Invert Set Register */ +#define PINT2_INVERT_CLEAR 0xFFC0421C /* PINT2 Pint Invert Clear Register */ +#define PINT2_PINSTATE 0xFFC04220 /* PINT2 Pint Pinstate Register */ +#define PINT2_LATCH 0xFFC04224 /* PINT2 Pint Latch Register */ + +/* ========================= + PINT3 + ========================= */ +#define PINT3_MASK_SET 0xFFC04300 /* PINT3 Pint Mask Set Register */ +#define PINT3_MASK_CLEAR 0xFFC04304 /* PINT3 Pint Mask Clear Register */ +#define PINT3_REQUEST 0xFFC04308 /* PINT3 Pint Request Register */ +#define PINT3_ASSIGN 0xFFC0430C /* PINT3 Pint Assign Register */ +#define PINT3_EDGE_SET 0xFFC04310 /* PINT3 Pint Edge Set Register */ +#define PINT3_EDGE_CLEAR 0xFFC04314 /* PINT3 Pint Edge Clear Register */ +#define PINT3_INVERT_SET 0xFFC04318 /* PINT3 Pint Invert Set Register */ +#define PINT3_INVERT_CLEAR 0xFFC0431C /* PINT3 Pint Invert Clear Register */ +#define PINT3_PINSTATE 0xFFC04320 /* PINT3 Pint Pinstate Register */ +#define PINT3_LATCH 0xFFC04324 /* PINT3 Pint Latch Register */ + +/* ========================= + PINT4 + ========================= */ +#define PINT4_MASK_SET 0xFFC04400 /* PINT4 Pint Mask Set Register */ +#define PINT4_MASK_CLEAR 0xFFC04404 /* PINT4 Pint Mask Clear Register */ +#define PINT4_REQUEST 0xFFC04408 /* PINT4 Pint Request Register */ +#define PINT4_ASSIGN 0xFFC0440C /* PINT4 Pint Assign Register */ +#define PINT4_EDGE_SET 0xFFC04410 /* PINT4 Pint Edge Set Register */ +#define PINT4_EDGE_CLEAR 0xFFC04414 /* PINT4 Pint Edge Clear Register */ +#define PINT4_INVERT_SET 0xFFC04418 /* PINT4 Pint Invert Set Register */ +#define PINT4_INVERT_CLEAR 0xFFC0441C /* PINT4 Pint Invert Clear Register */ +#define PINT4_PINSTATE 0xFFC04420 /* PINT4 Pint Pinstate Register */ +#define PINT4_LATCH 0xFFC04424 /* PINT4 Pint Latch Register */ + +/* ========================= + PINT5 + ========================= */ +#define PINT5_MASK_SET 0xFFC04500 /* PINT5 Pint Mask Set Register */ +#define PINT5_MASK_CLEAR 0xFFC04504 /* PINT5 Pint Mask Clear Register */ +#define PINT5_REQUEST 0xFFC04508 /* PINT5 Pint Request Register */ +#define PINT5_ASSIGN 0xFFC0450C /* PINT5 Pint Assign Register */ +#define PINT5_EDGE_SET 0xFFC04510 /* PINT5 Pint Edge Set Register */ +#define PINT5_EDGE_CLEAR 0xFFC04514 /* PINT5 Pint Edge Clear Register */ +#define PINT5_INVERT_SET 0xFFC04518 /* PINT5 Pint Invert Set Register */ +#define PINT5_INVERT_CLEAR 0xFFC0451C /* PINT5 Pint Invert Clear Register */ +#define PINT5_PINSTATE 0xFFC04520 /* PINT5 Pint Pinstate Register */ +#define PINT5_LATCH 0xFFC04524 /* PINT5 Pint Latch Register */ + + +/* ========================= + SMC Registers + ========================= */ + +/* ========================= + SMC0 + ========================= */ +#define SMC_GCTL 0xFFC16004 /* SMC0 SMC Control Register */ +#define SMC_GSTAT 0xFFC16008 /* SMC0 SMC Status Register */ +#define SMC_B0CTL 0xFFC1600C /* SMC0 SMC Bank0 Control Register */ +#define SMC_B0TIM 0xFFC16010 /* SMC0 SMC Bank0 Timing Register */ +#define SMC_B0ETIM 0xFFC16014 /* SMC0 SMC Bank0 Extended Timing Register */ +#define SMC_B1CTL 0xFFC1601C /* SMC0 SMC BANK1 Control Register */ +#define SMC_B1TIM 0xFFC16020 /* SMC0 SMC BANK1 Timing Register */ +#define SMC_B1ETIM 0xFFC16024 /* SMC0 SMC BANK1 Extended Timing Register */ +#define SMC_B2CTL 0xFFC1602C /* SMC0 SMC BANK2 Control Register */ +#define SMC_B2TIM 0xFFC16030 /* SMC0 SMC BANK2 Timing Register */ +#define SMC_B2ETIM 0xFFC16034 /* SMC0 SMC BANK2 Extended Timing Register */ +#define SMC_B3CTL 0xFFC1603C /* SMC0 SMC BANK3 Control Register */ +#define SMC_B3TIM 0xFFC16040 /* SMC0 SMC BANK3 Timing Register */ +#define SMC_B3ETIM 0xFFC16044 /* SMC0 SMC BANK3 Extended Timing Register */ + + +/* ========================= + WDOG Registers + ========================= */ + +/* ========================= + WDOG0 + ========================= */ +#define WDOG0_CTL 0xFFC17000 /* WDOG0 Control Register */ +#define WDOG0_CNT 0xFFC17004 /* WDOG0 Count Register */ +#define WDOG0_STAT 0xFFC17008 /* WDOG0 Watchdog Timer Status Register */ +#define WDOG_CTL WDOG0_CTL +#define WDOG_CNT WDOG0_CNT +#define WDOG_STAT WDOG0_STAT + +/* ========================= + WDOG1 + ========================= */ +#define WDOG1_CTL 0xFFC17800 /* WDOG1 Control Register */ +#define WDOG1_CNT 0xFFC17804 /* WDOG1 Count Register */ +#define WDOG1_STAT 0xFFC17808 /* WDOG1 Watchdog Timer Status Register */ + + +/* ========================= + SDU Registers + ========================= */ + +/* ========================= + SDU0 + ========================= */ +#define SDU0_IDCODE 0xFFC1F020 /* SDU0 ID Code Register */ +#define SDU0_CTL 0xFFC1F050 /* SDU0 Control Register */ +#define SDU0_STAT 0xFFC1F054 /* SDU0 Status Register */ +#define SDU0_MACCTL 0xFFC1F058 /* SDU0 Memory Access Control Register */ +#define SDU0_MACADDR 0xFFC1F05C /* SDU0 Memory Access Address Register */ +#define SDU0_MACDATA 0xFFC1F060 /* SDU0 Memory Access Data Register */ +#define SDU0_DMARD 0xFFC1F064 /* SDU0 DMA Read Data Register */ +#define SDU0_DMAWD 0xFFC1F068 /* SDU0 DMA Write Data Register */ +#define SDU0_MSG 0xFFC1F080 /* SDU0 Message Register */ +#define SDU0_MSG_SET 0xFFC1F084 /* SDU0 Message Set Register */ +#define SDU0_MSG_CLR 0xFFC1F088 /* SDU0 Message Clear Register */ +#define SDU0_GHLT 0xFFC1F08C /* SDU0 Group Halt Register */ + + +/* ========================= + EMAC Registers + ========================= */ +/* ========================= + EMAC0 + ========================= */ +#define EMAC0_MACCFG 0xFFC20000 /* EMAC0 MAC Configuration Register */ +#define EMAC0_MACFRMFILT 0xFFC20004 /* EMAC0 Filter Register for filtering Received Frames */ +#define EMAC0_HASHTBL_HI 0xFFC20008 /* EMAC0 Contains the Upper 32 bits of the hash table */ +#define EMAC0_HASHTBL_LO 0xFFC2000C /* EMAC0 Contains the lower 32 bits of the hash table */ +#define EMAC0_GMII_ADDR 0xFFC20010 /* EMAC0 Management Address Register */ +#define EMAC0_GMII_DATA 0xFFC20014 /* EMAC0 Management Data Register */ +#define EMAC0_FLOWCTL 0xFFC20018 /* EMAC0 MAC FLow Control Register */ +#define EMAC0_VLANTAG 0xFFC2001C /* EMAC0 VLAN Tag Register */ +#define EMAC0_VER 0xFFC20020 /* EMAC0 EMAC Version Register */ +#define EMAC0_DBG 0xFFC20024 /* EMAC0 EMAC Debug Register */ +#define EMAC0_RMTWKUP 0xFFC20028 /* EMAC0 Remote wake up frame register */ +#define EMAC0_PMT_CTLSTAT 0xFFC2002C /* EMAC0 PMT Control and Status Register */ +#define EMAC0_ISTAT 0xFFC20038 /* EMAC0 EMAC Interrupt Status Register */ +#define EMAC0_IMSK 0xFFC2003C /* EMAC0 EMAC Interrupt Mask Register */ +#define EMAC0_ADDR0_HI 0xFFC20040 /* EMAC0 EMAC Address0 High Register */ +#define EMAC0_ADDR0_LO 0xFFC20044 /* EMAC0 EMAC Address0 Low Register */ +#define EMAC0_MMC_CTL 0xFFC20100 /* EMAC0 MMC Control Register */ +#define EMAC0_MMC_RXINT 0xFFC20104 /* EMAC0 MMC RX Interrupt Register */ +#define EMAC0_MMC_TXINT 0xFFC20108 /* EMAC0 MMC TX Interrupt Register */ +#define EMAC0_MMC_RXIMSK 0xFFC2010C /* EMAC0 MMC RX Interrupt Mask Register */ +#define EMAC0_MMC_TXIMSK 0xFFC20110 /* EMAC0 MMC TX Interrupt Mask Register */ +#define EMAC0_TXOCTCNT_GB 0xFFC20114 /* EMAC0 Num bytes transmitted exclusive of preamble */ +#define EMAC0_TXFRMCNT_GB 0xFFC20118 /* EMAC0 Num frames transmitted exclusive of retired */ +#define EMAC0_TXBCASTFRM_G 0xFFC2011C /* EMAC0 Number of good broadcast frames transmitted. */ +#define EMAC0_TXMCASTFRM_G 0xFFC20120 /* EMAC0 Number of good multicast frames transmitted. */ +#define EMAC0_TX64_GB 0xFFC20124 /* EMAC0 Number of 64 byte length frames */ +#define EMAC0_TX65TO127_GB 0xFFC20128 /* EMAC0 Number of frames of length b/w 65-127 (inclusive) bytes */ +#define EMAC0_TX128TO255_GB 0xFFC2012C /* EMAC0 Number of frames of length b/w 128-255 (inclusive) bytes */ +#define EMAC0_TX256TO511_GB 0xFFC20130 /* EMAC0 Number of frames of length b/w 256-511 (inclusive) bytes */ +#define EMAC0_TX512TO1023_GB 0xFFC20134 /* EMAC0 Number of frames of length b/w 512-1023 (inclusive) bytes */ +#define EMAC0_TX1024TOMAX_GB 0xFFC20138 /* EMAC0 Number of frames of length b/w 1024-max (inclusive) bytes */ +#define EMAC0_TXUCASTFRM_GB 0xFFC2013C /* EMAC0 Number of good and bad unicast frames transmitted */ +#define EMAC0_TXMCASTFRM_GB 0xFFC20140 /* EMAC0 Number of good and bad multicast frames transmitted */ +#define EMAC0_TXBCASTFRM_GB 0xFFC20144 /* EMAC0 Number of good and bad broadcast frames transmitted */ +#define EMAC0_TXUNDR_ERR 0xFFC20148 /* EMAC0 Number of frames aborted due to frame underflow error */ +#define EMAC0_TXSNGCOL_G 0xFFC2014C /* EMAC0 Number of transmitted frames after single collision */ +#define EMAC0_TXMULTCOL_G 0xFFC20150 /* EMAC0 Number of transmitted frames with more than one collision */ +#define EMAC0_TXDEFERRED 0xFFC20154 /* EMAC0 Number of transmitted frames after deferral */ +#define EMAC0_TXLATECOL 0xFFC20158 /* EMAC0 Number of frames aborted due to late collision error */ +#define EMAC0_TXEXCESSCOL 0xFFC2015C /* EMAC0 Number of aborted frames due to excessive collisions */ +#define EMAC0_TXCARR_ERR 0xFFC20160 /* EMAC0 Number of aborted frames due to carrier sense error */ +#define EMAC0_TXOCTCNT_G 0xFFC20164 /* EMAC0 Number of bytes transmitted in good frames only */ +#define EMAC0_TXFRMCNT_G 0xFFC20168 /* EMAC0 Number of good frames transmitted. */ +#define EMAC0_TXEXCESSDEF 0xFFC2016C /* EMAC0 Number of frames aborted due to excessive deferral */ +#define EMAC0_TXPAUSEFRM 0xFFC20170 /* EMAC0 Number of good PAUSE frames transmitted. */ +#define EMAC0_TXVLANFRM_G 0xFFC20174 /* EMAC0 Number of VLAN frames transmitted */ +#define EMAC0_RXFRMCNT_GB 0xFFC20180 /* EMAC0 Number of good and bad frames received. */ +#define EMAC0_RXOCTCNT_GB 0xFFC20184 /* EMAC0 Number of bytes received in good and bad frames */ +#define EMAC0_RXOCTCNT_G 0xFFC20188 /* EMAC0 Number of bytes received only in good frames */ +#define EMAC0_RXBCASTFRM_G 0xFFC2018C /* EMAC0 Number of good broadcast frames received. */ +#define EMAC0_RXMCASTFRM_G 0xFFC20190 /* EMAC0 Number of good multicast frames received */ +#define EMAC0_RXCRC_ERR 0xFFC20194 /* EMAC0 Number of frames received with CRC error */ +#define EMAC0_RXALIGN_ERR 0xFFC20198 /* EMAC0 Number of frames with alignment error */ +#define EMAC0_RXRUNT_ERR 0xFFC2019C /* EMAC0 Number of frames received with runt error. */ +#define EMAC0_RXJAB_ERR 0xFFC201A0 /* EMAC0 Number of frames received with length greater than 1518 */ +#define EMAC0_RXUSIZE_G 0xFFC201A4 /* EMAC0 Number of frames received with length 64 */ +#define EMAC0_RXOSIZE_G 0xFFC201A8 /* EMAC0 Number of frames received with length greater than maxium */ +#define EMAC0_RX64_GB 0xFFC201AC /* EMAC0 Number of good and bad frames of lengh 64 bytes */ +#define EMAC0_RX65TO127_GB 0xFFC201B0 /* EMAC0 Number of good and bad frame between 64-127(inclusive) */ +#define EMAC0_RX128TO255_GB 0xFFC201B4 /* EMAC0 Number of good and bad frames received with length between 128 and 255 (inclusive) bytes, exclusive of preamble. */ +#define EMAC0_RX256TO511_GB 0xFFC201B8 /* EMAC0 Number of good and bad frames between 256-511(inclusive) */ +#define EMAC0_RX512TO1023_GB 0xFFC201BC /* EMAC0 Number of good and bad frames received between 512-1023 */ +#define EMAC0_RX1024TOMAX_GB 0xFFC201C0 /* EMAC0 Number of frames received between 1024 and maxsize */ +#define EMAC0_RXUCASTFRM_G 0xFFC201C4 /* EMAC0 Number of good unicast frames received. */ +#define EMAC0_RXLEN_ERR 0xFFC201C8 /* EMAC0 Number of frames received with length error */ +#define EMAC0_RXOORTYPE 0xFFC201CC /* EMAC0 Number of frames with length not equal to valid frame size */ +#define EMAC0_RXPAUSEFRM 0xFFC201D0 /* EMAC0 Number of good and valid PAUSE frames received. */ +#define EMAC0_RXFIFO_OVF 0xFFC201D4 /* EMAC0 Number of missed received frames due to FIFO overflow. This counter is not present in the GMAC-CORE configuration. */ +#define EMAC0_RXVLANFRM_GB 0xFFC201D8 /* EMAC0 Number of good and bad VLAN frames received. */ +#define EMAC0_RXWDOG_ERR 0xFFC201DC /* EMAC0 Frames received with error due to watchdog timeout */ +#define EMAC0_IPC_RXIMSK 0xFFC20200 /* EMAC0 MMC IPC RX Interrupt Mask Register */ +#define EMAC0_IPC_RXINT 0xFFC20208 /* EMAC0 MMC IPC RX Interrupt Register */ +#define EMAC0_RXIPV4_GD_FRM 0xFFC20210 /* EMAC0 Number of good IPv4 datagrams */ +#define EMAC0_RXIPV4_HDR_ERR_FRM 0xFFC20214 /* EMAC0 Number of IPv4 datagrams with header errors */ +#define EMAC0_RXIPV4_NOPAY_FRM 0xFFC20218 /* EMAC0 Number of IPv4 datagrams without checksum */ +#define EMAC0_RXIPV4_FRAG_FRM 0xFFC2021C /* EMAC0 Number of good IPv4 datagrams with fragmentation */ +#define EMAC0_RXIPV4_UDSBL_FRM 0xFFC20220 /* EMAC0 Number of IPv4 UDP datagrams with disabled checksum */ +#define EMAC0_RXIPV6_GD_FRM 0xFFC20224 /* EMAC0 Number of IPv4 datagrams with TCP/UDP/ICMP payloads */ +#define EMAC0_RXIPV6_HDR_ERR_FRM 0xFFC20228 /* EMAC0 Number of IPv6 datagrams with header errors */ +#define EMAC0_RXIPV6_NOPAY_FRM 0xFFC2022C /* EMAC0 Number of IPv6 datagrams with no TCP/UDP/ICMP payload */ +#define EMAC0_RXUDP_GD_FRM 0xFFC20230 /* EMAC0 Number of good IP datagrames with good UDP payload */ +#define EMAC0_RXUDP_ERR_FRM 0xFFC20234 /* EMAC0 Number of good IP datagrams with UDP checksum errors */ +#define EMAC0_RXTCP_GD_FRM 0xFFC20238 /* EMAC0 Number of good IP datagrams with a good TCP payload */ +#define EMAC0_RXTCP_ERR_FRM 0xFFC2023C /* EMAC0 Number of good IP datagrams with TCP checksum errors */ +#define EMAC0_RXICMP_GD_FRM 0xFFC20240 /* EMAC0 Number of good IP datagrams with a good ICMP payload */ +#define EMAC0_RXICMP_ERR_FRM 0xFFC20244 /* EMAC0 Number of good IP datagrams with ICMP checksum errors */ +#define EMAC0_RXIPV4_GD_OCT 0xFFC20250 /* EMAC0 Bytes received in IPv4 datagrams including tcp,udp or icmp */ +#define EMAC0_RXIPV4_HDR_ERR_OCT 0xFFC20254 /* EMAC0 Bytes received in IPv4 datagrams with header errors */ +#define EMAC0_RXIPV4_NOPAY_OCT 0xFFC20258 /* EMAC0 Bytes received in IPv4 datagrams without tcp,udp,icmp load */ +#define EMAC0_RXIPV4_FRAG_OCT 0xFFC2025C /* EMAC0 Bytes received in fragmented IPv4 datagrams */ +#define EMAC0_RXIPV4_UDSBL_OCT 0xFFC20260 /* EMAC0 Bytes received in UDP segment with checksum disabled */ +#define EMAC0_RXIPV6_GD_OCT 0xFFC20264 /* EMAC0 Bytes received in good IPv6 including tcp,udp or icmp load */ +#define EMAC0_RXIPV6_HDR_ERR_OCT 0xFFC20268 /* EMAC0 Number of bytes received in IPv6 with header errors */ +#define EMAC0_RXIPV6_NOPAY_OCT 0xFFC2026C /* EMAC0 Bytes received in IPv6 without tcp,udp or icmp load */ +#define EMAC0_RXUDP_GD_OCT 0xFFC20270 /* EMAC0 Number of bytes received in good UDP segments */ +#define EMAC0_RXUDP_ERR_OCT 0xFFC20274 /* EMAC0 Number of bytes received in UDP segment with checksum err */ +#define EMAC0_RXTCP_GD_OCT 0xFFC20278 /* EMAC0 Number of bytes received in a good TCP segment */ +#define EMAC0_RXTCP_ERR_OCT 0xFFC2027C /* EMAC0 Number of bytes received in TCP segment with checksum err */ +#define EMAC0_RXICMP_GD_OCT 0xFFC20280 /* EMAC0 Number of bytes received in a good ICMP segment */ +#define EMAC0_RXICMP_ERR_OCT 0xFFC20284 /* EMAC0 Bytes received in an ICMP segment with checksum errors */ +#define EMAC0_TM_CTL 0xFFC20700 /* EMAC0 EMAC Time Stamp Control Register */ +#define EMAC0_TM_SUBSEC 0xFFC20704 /* EMAC0 EMAC Time Stamp Sub Second Increment */ +#define EMAC0_TM_SEC 0xFFC20708 /* EMAC0 EMAC Time Stamp Second Register */ +#define EMAC0_TM_NSEC 0xFFC2070C /* EMAC0 EMAC Time Stamp Nano Second Register */ +#define EMAC0_TM_SECUPDT 0xFFC20710 /* EMAC0 EMAC Time Stamp Seconds Update */ +#define EMAC0_TM_NSECUPDT 0xFFC20714 /* EMAC0 EMAC Time Stamp Nano Seconds Update */ +#define EMAC0_TM_ADDEND 0xFFC20718 /* EMAC0 EMAC Time Stamp Addend Register */ +#define EMAC0_TM_TGTM 0xFFC2071C /* EMAC0 EMAC Time Stamp Target Time Sec. */ +#define EMAC0_TM_NTGTM 0xFFC20720 /* EMAC0 EMAC Time Stamp Target Time Nanosec. */ +#define EMAC0_TM_HISEC 0xFFC20724 /* EMAC0 EMAC Time Stamp High Second Register */ +#define EMAC0_TM_STMPSTAT 0xFFC20728 /* EMAC0 EMAC Time Stamp Status Register */ +#define EMAC0_TM_PPSCTL 0xFFC2072C /* EMAC0 EMAC PPS Control Register */ +#define EMAC0_TM_AUXSTMP_NSEC 0xFFC20730 /* EMAC0 EMAC Auxillary Time Stamp Nano Register */ +#define EMAC0_TM_AUXSTMP_SEC 0xFFC20734 /* EMAC0 EMAC Auxillary Time Stamp Sec Register */ +#define EMAC0_DMA_BUSMODE 0xFFC21000 /* EMAC0 Bus Operating Modes for EMAC DMA */ +#define EMAC0_DMA_TXPOLL 0xFFC21004 /* EMAC0 TX DMA Poll demand register */ +#define EMAC0_DMA_RXPOLL 0xFFC21008 /* EMAC0 RX DMA Poll demand register */ +#define EMAC0_DMA_RXDSC_ADDR 0xFFC2100C /* EMAC0 RX Descriptor List Address */ +#define EMAC0_DMA_TXDSC_ADDR 0xFFC21010 /* EMAC0 TX Descriptor List Address */ +#define EMAC0_DMA_STAT 0xFFC21014 /* EMAC0 DMA Status Register */ +#define EMAC0_DMA_OPMODE 0xFFC21018 /* EMAC0 DMA Operation Mode Register */ +#define EMAC0_DMA_IEN 0xFFC2101C /* EMAC0 DMA Interrupt Enable Register */ +#define EMAC0_DMA_MISS_FRM 0xFFC21020 /* EMAC0 DMA missed frame and buffer overflow counter */ +#define EMAC0_DMA_RXIWDOG 0xFFC21024 /* EMAC0 DMA RX Interrupt Watch Dog timer */ +#define EMAC0_DMA_BMMODE 0xFFC21028 /* EMAC0 AXI Bus Mode Register */ +#define EMAC0_DMA_BMSTAT 0xFFC2102C /* EMAC0 AXI Status Register */ +#define EMAC0_DMA_TXDSC_CUR 0xFFC21048 /* EMAC0 TX current descriptor register */ +#define EMAC0_DMA_RXDSC_CUR 0xFFC2104C /* EMAC0 RX current descriptor register */ +#define EMAC0_DMA_TXBUF_CUR 0xFFC21050 /* EMAC0 TX current buffer pointer register */ +#define EMAC0_DMA_RXBUF_CUR 0xFFC21054 /* EMAC0 RX current buffer pointer register */ +#define EMAC0_HWFEAT 0xFFC21058 /* EMAC0 Hardware Feature Register */ + +/* ========================= + EMAC1 + ========================= */ +#define EMAC1_MACCFG 0xFFC22000 /* EMAC1 MAC Configuration Register */ +#define EMAC1_MACFRMFILT 0xFFC22004 /* EMAC1 Filter Register for filtering Received Frames */ +#define EMAC1_HASHTBL_HI 0xFFC22008 /* EMAC1 Contains the Upper 32 bits of the hash table */ +#define EMAC1_HASHTBL_LO 0xFFC2200C /* EMAC1 Contains the lower 32 bits of the hash table */ +#define EMAC1_GMII_ADDR 0xFFC22010 /* EMAC1 Management Address Register */ +#define EMAC1_GMII_DATA 0xFFC22014 /* EMAC1 Management Data Register */ +#define EMAC1_FLOWCTL 0xFFC22018 /* EMAC1 MAC FLow Control Register */ +#define EMAC1_VLANTAG 0xFFC2201C /* EMAC1 VLAN Tag Register */ +#define EMAC1_VER 0xFFC22020 /* EMAC1 EMAC Version Register */ +#define EMAC1_DBG 0xFFC22024 /* EMAC1 EMAC Debug Register */ +#define EMAC1_RMTWKUP 0xFFC22028 /* EMAC1 Remote wake up frame register */ +#define EMAC1_PMT_CTLSTAT 0xFFC2202C /* EMAC1 PMT Control and Status Register */ +#define EMAC1_ISTAT 0xFFC22038 /* EMAC1 EMAC Interrupt Status Register */ +#define EMAC1_IMSK 0xFFC2203C /* EMAC1 EMAC Interrupt Mask Register */ +#define EMAC1_ADDR0_HI 0xFFC22040 /* EMAC1 EMAC Address0 High Register */ +#define EMAC1_ADDR0_LO 0xFFC22044 /* EMAC1 EMAC Address0 Low Register */ +#define EMAC1_MMC_CTL 0xFFC22100 /* EMAC1 MMC Control Register */ +#define EMAC1_MMC_RXINT 0xFFC22104 /* EMAC1 MMC RX Interrupt Register */ +#define EMAC1_MMC_TXINT 0xFFC22108 /* EMAC1 MMC TX Interrupt Register */ +#define EMAC1_MMC_RXIMSK 0xFFC2210C /* EMAC1 MMC RX Interrupt Mask Register */ +#define EMAC1_MMC_TXIMSK 0xFFC22110 /* EMAC1 MMC TX Interrupt Mask Register */ +#define EMAC1_TXOCTCNT_GB 0xFFC22114 /* EMAC1 Num bytes transmitted exclusive of preamble */ +#define EMAC1_TXFRMCNT_GB 0xFFC22118 /* EMAC1 Num frames transmitted exclusive of retired */ +#define EMAC1_TXBCASTFRM_G 0xFFC2211C /* EMAC1 Number of good broadcast frames transmitted. */ +#define EMAC1_TXMCASTFRM_G 0xFFC22120 /* EMAC1 Number of good multicast frames transmitted. */ +#define EMAC1_TX64_GB 0xFFC22124 /* EMAC1 Number of 64 byte length frames */ +#define EMAC1_TX65TO127_GB 0xFFC22128 /* EMAC1 Number of frames of length b/w 65-127 (inclusive) bytes */ +#define EMAC1_TX128TO255_GB 0xFFC2212C /* EMAC1 Number of frames of length b/w 128-255 (inclusive) bytes */ +#define EMAC1_TX256TO511_GB 0xFFC22130 /* EMAC1 Number of frames of length b/w 256-511 (inclusive) bytes */ +#define EMAC1_TX512TO1023_GB 0xFFC22134 /* EMAC1 Number of frames of length b/w 512-1023 (inclusive) bytes */ +#define EMAC1_TX1024TOMAX_GB 0xFFC22138 /* EMAC1 Number of frames of length b/w 1024-max (inclusive) bytes */ +#define EMAC1_TXUCASTFRM_GB 0xFFC2213C /* EMAC1 Number of good and bad unicast frames transmitted */ +#define EMAC1_TXMCASTFRM_GB 0xFFC22140 /* EMAC1 Number of good and bad multicast frames transmitted */ +#define EMAC1_TXBCASTFRM_GB 0xFFC22144 /* EMAC1 Number of good and bad broadcast frames transmitted */ +#define EMAC1_TXUNDR_ERR 0xFFC22148 /* EMAC1 Number of frames aborted due to frame underflow error */ +#define EMAC1_TXSNGCOL_G 0xFFC2214C /* EMAC1 Number of transmitted frames after single collision */ +#define EMAC1_TXMULTCOL_G 0xFFC22150 /* EMAC1 Number of transmitted frames with more than one collision */ +#define EMAC1_TXDEFERRED 0xFFC22154 /* EMAC1 Number of transmitted frames after deferral */ +#define EMAC1_TXLATECOL 0xFFC22158 /* EMAC1 Number of frames aborted due to late collision error */ +#define EMAC1_TXEXCESSCOL 0xFFC2215C /* EMAC1 Number of aborted frames due to excessive collisions */ +#define EMAC1_TXCARR_ERR 0xFFC22160 /* EMAC1 Number of aborted frames due to carrier sense error */ +#define EMAC1_TXOCTCNT_G 0xFFC22164 /* EMAC1 Number of bytes transmitted in good frames only */ +#define EMAC1_TXFRMCNT_G 0xFFC22168 /* EMAC1 Number of good frames transmitted. */ +#define EMAC1_TXEXCESSDEF 0xFFC2216C /* EMAC1 Number of frames aborted due to excessive deferral */ +#define EMAC1_TXPAUSEFRM 0xFFC22170 /* EMAC1 Number of good PAUSE frames transmitted. */ +#define EMAC1_TXVLANFRM_G 0xFFC22174 /* EMAC1 Number of VLAN frames transmitted */ +#define EMAC1_RXFRMCNT_GB 0xFFC22180 /* EMAC1 Number of good and bad frames received. */ +#define EMAC1_RXOCTCNT_GB 0xFFC22184 /* EMAC1 Number of bytes received in good and bad frames */ +#define EMAC1_RXOCTCNT_G 0xFFC22188 /* EMAC1 Number of bytes received only in good frames */ +#define EMAC1_RXBCASTFRM_G 0xFFC2218C /* EMAC1 Number of good broadcast frames received. */ +#define EMAC1_RXMCASTFRM_G 0xFFC22190 /* EMAC1 Number of good multicast frames received */ +#define EMAC1_RXCRC_ERR 0xFFC22194 /* EMAC1 Number of frames received with CRC error */ +#define EMAC1_RXALIGN_ERR 0xFFC22198 /* EMAC1 Number of frames with alignment error */ +#define EMAC1_RXRUNT_ERR 0xFFC2219C /* EMAC1 Number of frames received with runt error. */ +#define EMAC1_RXJAB_ERR 0xFFC221A0 /* EMAC1 Number of frames received with length greater than 1518 */ +#define EMAC1_RXUSIZE_G 0xFFC221A4 /* EMAC1 Number of frames received with length 64 */ +#define EMAC1_RXOSIZE_G 0xFFC221A8 /* EMAC1 Number of frames received with length greater than maxium */ +#define EMAC1_RX64_GB 0xFFC221AC /* EMAC1 Number of good and bad frames of lengh 64 bytes */ +#define EMAC1_RX65TO127_GB 0xFFC221B0 /* EMAC1 Number of good and bad frame between 64-127(inclusive) */ +#define EMAC1_RX128TO255_GB 0xFFC221B4 /* EMAC1 Number of good and bad frames received with length between 128 and 255 (inclusive) bytes, exclusive of preamble. */ +#define EMAC1_RX256TO511_GB 0xFFC221B8 /* EMAC1 Number of good and bad frames between 256-511(inclusive) */ +#define EMAC1_RX512TO1023_GB 0xFFC221BC /* EMAC1 Number of good and bad frames received between 512-1023 */ +#define EMAC1_RX1024TOMAX_GB 0xFFC221C0 /* EMAC1 Number of frames received between 1024 and maxsize */ +#define EMAC1_RXUCASTFRM_G 0xFFC221C4 /* EMAC1 Number of good unicast frames received. */ +#define EMAC1_RXLEN_ERR 0xFFC221C8 /* EMAC1 Number of frames received with length error */ +#define EMAC1_RXOORTYPE 0xFFC221CC /* EMAC1 Number of frames with length not equal to valid frame size */ +#define EMAC1_RXPAUSEFRM 0xFFC221D0 /* EMAC1 Number of good and valid PAUSE frames received. */ +#define EMAC1_RXFIFO_OVF 0xFFC221D4 /* EMAC1 Number of missed received frames due to FIFO overflow. This counter is not present in the GMAC-CORE configuration. */ +#define EMAC1_RXVLANFRM_GB 0xFFC221D8 /* EMAC1 Number of good and bad VLAN frames received. */ +#define EMAC1_RXWDOG_ERR 0xFFC221DC /* EMAC1 Frames received with error due to watchdog timeout */ +#define EMAC1_IPC_RXIMSK 0xFFC22200 /* EMAC1 MMC IPC RX Interrupt Mask Register */ +#define EMAC1_IPC_RXINT 0xFFC22208 /* EMAC1 MMC IPC RX Interrupt Register */ +#define EMAC1_RXIPV4_GD_FRM 0xFFC22210 /* EMAC1 Number of good IPv4 datagrams */ +#define EMAC1_RXIPV4_HDR_ERR_FRM 0xFFC22214 /* EMAC1 Number of IPv4 datagrams with header errors */ +#define EMAC1_RXIPV4_NOPAY_FRM 0xFFC22218 /* EMAC1 Number of IPv4 datagrams without checksum */ +#define EMAC1_RXIPV4_FRAG_FRM 0xFFC2221C /* EMAC1 Number of good IPv4 datagrams with fragmentation */ +#define EMAC1_RXIPV4_UDSBL_FRM 0xFFC22220 /* EMAC1 Number of IPv4 UDP datagrams with disabled checksum */ +#define EMAC1_RXIPV6_GD_FRM 0xFFC22224 /* EMAC1 Number of IPv4 datagrams with TCP/UDP/ICMP payloads */ +#define EMAC1_RXIPV6_HDR_ERR_FRM 0xFFC22228 /* EMAC1 Number of IPv6 datagrams with header errors */ +#define EMAC1_RXIPV6_NOPAY_FRM 0xFFC2222C /* EMAC1 Number of IPv6 datagrams with no TCP/UDP/ICMP payload */ +#define EMAC1_RXUDP_GD_FRM 0xFFC22230 /* EMAC1 Number of good IP datagrames with good UDP payload */ +#define EMAC1_RXUDP_ERR_FRM 0xFFC22234 /* EMAC1 Number of good IP datagrams with UDP checksum errors */ +#define EMAC1_RXTCP_GD_FRM 0xFFC22238 /* EMAC1 Number of good IP datagrams with a good TCP payload */ +#define EMAC1_RXTCP_ERR_FRM 0xFFC2223C /* EMAC1 Number of good IP datagrams with TCP checksum errors */ +#define EMAC1_RXICMP_GD_FRM 0xFFC22240 /* EMAC1 Number of good IP datagrams with a good ICMP payload */ +#define EMAC1_RXICMP_ERR_FRM 0xFFC22244 /* EMAC1 Number of good IP datagrams with ICMP checksum errors */ +#define EMAC1_RXIPV4_GD_OCT 0xFFC22250 /* EMAC1 Bytes received in IPv4 datagrams including tcp,udp or icmp */ +#define EMAC1_RXIPV4_HDR_ERR_OCT 0xFFC22254 /* EMAC1 Bytes received in IPv4 datagrams with header errors */ +#define EMAC1_RXIPV4_NOPAY_OCT 0xFFC22258 /* EMAC1 Bytes received in IPv4 datagrams without tcp,udp,icmp load */ +#define EMAC1_RXIPV4_FRAG_OCT 0xFFC2225C /* EMAC1 Bytes received in fragmented IPv4 datagrams */ +#define EMAC1_RXIPV4_UDSBL_OCT 0xFFC22260 /* EMAC1 Bytes received in UDP segment with checksum disabled */ +#define EMAC1_RXIPV6_GD_OCT 0xFFC22264 /* EMAC1 Bytes received in good IPv6 including tcp,udp or icmp load */ +#define EMAC1_RXIPV6_HDR_ERR_OCT 0xFFC22268 /* EMAC1 Number of bytes received in IPv6 with header errors */ +#define EMAC1_RXIPV6_NOPAY_OCT 0xFFC2226C /* EMAC1 Bytes received in IPv6 without tcp,udp or icmp load */ +#define EMAC1_RXUDP_GD_OCT 0xFFC22270 /* EMAC1 Number of bytes received in good UDP segments */ +#define EMAC1_RXUDP_ERR_OCT 0xFFC22274 /* EMAC1 Number of bytes received in UDP segment with checksum err */ +#define EMAC1_RXTCP_GD_OCT 0xFFC22278 /* EMAC1 Number of bytes received in a good TCP segment */ +#define EMAC1_RXTCP_ERR_OCT 0xFFC2227C /* EMAC1 Number of bytes received in TCP segment with checksum err */ +#define EMAC1_RXICMP_GD_OCT 0xFFC22280 /* EMAC1 Number of bytes received in a good ICMP segment */ +#define EMAC1_RXICMP_ERR_OCT 0xFFC22284 /* EMAC1 Bytes received in an ICMP segment with checksum errors */ +#define EMAC1_TM_CTL 0xFFC22700 /* EMAC1 EMAC Time Stamp Control Register */ +#define EMAC1_TM_SUBSEC 0xFFC22704 /* EMAC1 EMAC Time Stamp Sub Second Increment */ +#define EMAC1_TM_SEC 0xFFC22708 /* EMAC1 EMAC Time Stamp Second Register */ +#define EMAC1_TM_NSEC 0xFFC2270C /* EMAC1 EMAC Time Stamp Nano Second Register */ +#define EMAC1_TM_SECUPDT 0xFFC22710 /* EMAC1 EMAC Time Stamp Seconds Update */ +#define EMAC1_TM_NSECUPDT 0xFFC22714 /* EMAC1 EMAC Time Stamp Nano Seconds Update */ +#define EMAC1_TM_ADDEND 0xFFC22718 /* EMAC1 EMAC Time Stamp Addend Register */ +#define EMAC1_TM_TGTM 0xFFC2271C /* EMAC1 EMAC Time Stamp Target Time Sec. */ +#define EMAC1_TM_NTGTM 0xFFC22720 /* EMAC1 EMAC Time Stamp Target Time Nanosec. */ +#define EMAC1_TM_HISEC 0xFFC22724 /* EMAC1 EMAC Time Stamp High Second Register */ +#define EMAC1_TM_STMPSTAT 0xFFC22728 /* EMAC1 EMAC Time Stamp Status Register */ +#define EMAC1_TM_PPSCTL 0xFFC2272C /* EMAC1 EMAC PPS Control Register */ +#define EMAC1_TM_AUXSTMP_NSEC 0xFFC22730 /* EMAC1 EMAC Auxillary Time Stamp Nano Register */ +#define EMAC1_TM_AUXSTMP_SEC 0xFFC22734 /* EMAC1 EMAC Auxillary Time Stamp Sec Register */ +#define EMAC1_DMA_BUSMODE 0xFFC23000 /* EMAC1 Bus Operating Modes for EMAC DMA */ +#define EMAC1_DMA_TXPOLL 0xFFC23004 /* EMAC1 TX DMA Poll demand register */ +#define EMAC1_DMA_RXPOLL 0xFFC23008 /* EMAC1 RX DMA Poll demand register */ +#define EMAC1_DMA_RXDSC_ADDR 0xFFC2300C /* EMAC1 RX Descriptor List Address */ +#define EMAC1_DMA_TXDSC_ADDR 0xFFC23010 /* EMAC1 TX Descriptor List Address */ +#define EMAC1_DMA_STAT 0xFFC23014 /* EMAC1 DMA Status Register */ +#define EMAC1_DMA_OPMODE 0xFFC23018 /* EMAC1 DMA Operation Mode Register */ +#define EMAC1_DMA_IEN 0xFFC2301C /* EMAC1 DMA Interrupt Enable Register */ +#define EMAC1_DMA_MISS_FRM 0xFFC23020 /* EMAC1 DMA missed frame and buffer overflow counter */ +#define EMAC1_DMA_RXIWDOG 0xFFC23024 /* EMAC1 DMA RX Interrupt Watch Dog timer */ +#define EMAC1_DMA_BMMODE 0xFFC23028 /* EMAC1 AXI Bus Mode Register */ +#define EMAC1_DMA_BMSTAT 0xFFC2302C /* EMAC1 AXI Status Register */ +#define EMAC1_DMA_TXDSC_CUR 0xFFC23048 /* EMAC1 TX current descriptor register */ +#define EMAC1_DMA_RXDSC_CUR 0xFFC2304C /* EMAC1 RX current descriptor register */ +#define EMAC1_DMA_TXBUF_CUR 0xFFC23050 /* EMAC1 TX current buffer pointer register */ +#define EMAC1_DMA_RXBUF_CUR 0xFFC23054 /* EMAC1 RX current buffer pointer register */ +#define EMAC1_HWFEAT 0xFFC23058 /* EMAC1 Hardware Feature Register */ + + +/* ========================= + SPI Registers + ========================= */ + +/* ========================= + SPI0 + ========================= */ +#define SPI0_REGBASE 0xFFC40400 +#define SPI0_CTL 0xFFC40404 /* SPI0 Control Register */ +#define SPI0_RXCTL 0xFFC40408 /* SPI0 RX Control Register */ +#define SPI0_TXCTL 0xFFC4040C /* SPI0 TX Control Register */ +#define SPI0_CLK 0xFFC40410 /* SPI0 Clock Rate Register */ +#define SPI0_DLY 0xFFC40414 /* SPI0 Delay Register */ +#define SPI0_SLVSEL 0xFFC40418 /* SPI0 Slave Select Register */ +#define SPI0_RWC 0xFFC4041C /* SPI0 Received Word-Count Register */ +#define SPI0_RWCR 0xFFC40420 /* SPI0 Received Word-Count Reload Register */ +#define SPI0_TWC 0xFFC40424 /* SPI0 Transmitted Word-Count Register */ +#define SPI0_TWCR 0xFFC40428 /* SPI0 Transmitted Word-Count Reload Register */ +#define SPI0_IMSK 0xFFC40430 /* SPI0 Interrupt Mask Register */ +#define SPI0_IMSK_CLR 0xFFC40434 /* SPI0 Interrupt Mask Clear Register */ +#define SPI0_IMSK_SET 0xFFC40438 /* SPI0 Interrupt Mask Set Register */ +#define SPI0_STAT 0xFFC40440 /* SPI0 Status Register */ +#define SPI0_ILAT 0xFFC40444 /* SPI0 Masked Interrupt Condition Register */ +#define SPI0_ILAT_CLR 0xFFC40448 /* SPI0 Masked Interrupt Clear Register */ +#define SPI0_RFIFO 0xFFC40450 /* SPI0 Receive FIFO Data Register */ +#define SPI0_TFIFO 0xFFC40458 /* SPI0 Transmit FIFO Data Register */ + +/* ========================= + SPI1 + ========================= */ +#define SPI1_REGBASE 0xFFC40500 +#define SPI1_CTL 0xFFC40504 /* SPI1 Control Register */ +#define SPI1_RXCTL 0xFFC40508 /* SPI1 RX Control Register */ +#define SPI1_TXCTL 0xFFC4050C /* SPI1 TX Control Register */ +#define SPI1_CLK 0xFFC40510 /* SPI1 Clock Rate Register */ +#define SPI1_DLY 0xFFC40514 /* SPI1 Delay Register */ +#define SPI1_SLVSEL 0xFFC40518 /* SPI1 Slave Select Register */ +#define SPI1_RWC 0xFFC4051C /* SPI1 Received Word-Count Register */ +#define SPI1_RWCR 0xFFC40520 /* SPI1 Received Word-Count Reload Register */ +#define SPI1_TWC 0xFFC40524 /* SPI1 Transmitted Word-Count Register */ +#define SPI1_TWCR 0xFFC40528 /* SPI1 Transmitted Word-Count Reload Register */ +#define SPI1_IMSK 0xFFC40530 /* SPI1 Interrupt Mask Register */ +#define SPI1_IMSK_CLR 0xFFC40534 /* SPI1 Interrupt Mask Clear Register */ +#define SPI1_IMSK_SET 0xFFC40538 /* SPI1 Interrupt Mask Set Register */ +#define SPI1_STAT 0xFFC40540 /* SPI1 Status Register */ +#define SPI1_ILAT 0xFFC40544 /* SPI1 Masked Interrupt Condition Register */ +#define SPI1_ILAT_CLR 0xFFC40548 /* SPI1 Masked Interrupt Clear Register */ +#define SPI1_RFIFO 0xFFC40550 /* SPI1 Receive FIFO Data Register */ +#define SPI1_TFIFO 0xFFC40558 /* SPI1 Transmit FIFO Data Register */ + +/* ========================= + SPORT Registers + ========================= */ + +/* ========================= + SPORT0 + ========================= */ +#define SPORT0_CTL_A 0xFFC40000 /* SPORT0 'A' Control Register */ +#define SPORT0_DIV_A 0xFFC40004 /* SPORT0 'A' Clock and FS Divide Register */ +#define SPORT0_MCTL_A 0xFFC40008 /* SPORT0 'A' Multichannel Control Register */ +#define SPORT0_CS0_A 0xFFC4000C /* SPORT0 'A' Multichannel Select Register (Channels 0-31) */ +#define SPORT0_CS1_A 0xFFC40010 /* SPORT0 'A' Multichannel Select Register (Channels 32-63) */ +#define SPORT0_CS2_A 0xFFC40014 /* SPORT0 'A' Multichannel Select Register (Channels 64-95) */ +#define SPORT0_CS3_A 0xFFC40018 /* SPORT0 'A' Multichannel Select Register (Channels 96-127) */ +#define SPORT0_CNT_A 0xFFC4001C /* SPORT0 'A' Frame Sync And Clock Divisor Current Count */ +#define SPORT0_ERR_A 0xFFC40020 /* SPORT0 'A' Error Register */ +#define SPORT0_MSTAT_A 0xFFC40024 /* SPORT0 'A' Multichannel Mode Status Register */ +#define SPORT0_CTL2_A 0xFFC40028 /* SPORT0 'A' Control Register 2 */ +#define SPORT0_TXPRI_A 0xFFC40040 /* SPORT0 'A' Primary Channel Transmit Buffer Register */ +#define SPORT0_RXPRI_A 0xFFC40044 /* SPORT0 'A' Primary Channel Receive Buffer Register */ +#define SPORT0_TXSEC_A 0xFFC40048 /* SPORT0 'A' Secondary Channel Transmit Buffer Register */ +#define SPORT0_RXSEC_A 0xFFC4004C /* SPORT0 'A' Secondary Channel Receive Buffer Register */ +#define SPORT0_CTL_B 0xFFC40080 /* SPORT0 'B' Control Register */ +#define SPORT0_DIV_B 0xFFC40084 /* SPORT0 'B' Clock and FS Divide Register */ +#define SPORT0_MCTL_B 0xFFC40088 /* SPORT0 'B' Multichannel Control Register */ +#define SPORT0_CS0_B 0xFFC4008C /* SPORT0 'B' Multichannel Select Register (Channels 0-31) */ +#define SPORT0_CS1_B 0xFFC40090 /* SPORT0 'B' Multichannel Select Register (Channels 32-63) */ +#define SPORT0_CS2_B 0xFFC40094 /* SPORT0 'B' Multichannel Select Register (Channels 64-95) */ +#define SPORT0_CS3_B 0xFFC40098 /* SPORT0 'B' Multichannel Select Register (Channels 96-127) */ +#define SPORT0_CNT_B 0xFFC4009C /* SPORT0 'B' Frame Sync And Clock Divisor Current Count */ +#define SPORT0_ERR_B 0xFFC400A0 /* SPORT0 'B' Error Register */ +#define SPORT0_MSTAT_B 0xFFC400A4 /* SPORT0 'B' Multichannel Mode Status Register */ +#define SPORT0_CTL2_B 0xFFC400A8 /* SPORT0 'B' Control Register 2 */ +#define SPORT0_TXPRI_B 0xFFC400C0 /* SPORT0 'B' Primary Channel Transmit Buffer Register */ +#define SPORT0_RXPRI_B 0xFFC400C4 /* SPORT0 'B' Primary Channel Receive Buffer Register */ +#define SPORT0_TXSEC_B 0xFFC400C8 /* SPORT0 'B' Secondary Channel Transmit Buffer Register */ +#define SPORT0_RXSEC_B 0xFFC400CC /* SPORT0 'B' Secondary Channel Receive Buffer Register */ + +/* ========================= + SPORT1 + ========================= */ +#define SPORT1_CTL_A 0xFFC40100 /* SPORT1 'A' Control Register */ +#define SPORT1_DIV_A 0xFFC40104 /* SPORT1 'A' Clock and FS Divide Register */ +#define SPORT1_MCTL_A 0xFFC40108 /* SPORT1 'A' Multichannel Control Register */ +#define SPORT1_CS0_A 0xFFC4010C /* SPORT1 'A' Multichannel Select Register (Channels 0-31) */ +#define SPORT1_CS1_A 0xFFC40110 /* SPORT1 'A' Multichannel Select Register (Channels 32-63) */ +#define SPORT1_CS2_A 0xFFC40114 /* SPORT1 'A' Multichannel Select Register (Channels 64-95) */ +#define SPORT1_CS3_A 0xFFC40118 /* SPORT1 'A' Multichannel Select Register (Channels 96-127) */ +#define SPORT1_CNT_A 0xFFC4011C /* SPORT1 'A' Frame Sync And Clock Divisor Current Count */ +#define SPORT1_ERR_A 0xFFC40120 /* SPORT1 'A' Error Register */ +#define SPORT1_MSTAT_A 0xFFC40124 /* SPORT1 'A' Multichannel Mode Status Register */ +#define SPORT1_CTL2_A 0xFFC40128 /* SPORT1 'A' Control Register 2 */ +#define SPORT1_TXPRI_A 0xFFC40140 /* SPORT1 'A' Primary Channel Transmit Buffer Register */ +#define SPORT1_RXPRI_A 0xFFC40144 /* SPORT1 'A' Primary Channel Receive Buffer Register */ +#define SPORT1_TXSEC_A 0xFFC40148 /* SPORT1 'A' Secondary Channel Transmit Buffer Register */ +#define SPORT1_RXSEC_A 0xFFC4014C /* SPORT1 'A' Secondary Channel Receive Buffer Register */ +#define SPORT1_CTL_B 0xFFC40180 /* SPORT1 'B' Control Register */ +#define SPORT1_DIV_B 0xFFC40184 /* SPORT1 'B' Clock and FS Divide Register */ +#define SPORT1_MCTL_B 0xFFC40188 /* SPORT1 'B' Multichannel Control Register */ +#define SPORT1_CS0_B 0xFFC4018C /* SPORT1 'B' Multichannel Select Register (Channels 0-31) */ +#define SPORT1_CS1_B 0xFFC40190 /* SPORT1 'B' Multichannel Select Register (Channels 32-63) */ +#define SPORT1_CS2_B 0xFFC40194 /* SPORT1 'B' Multichannel Select Register (Channels 64-95) */ +#define SPORT1_CS3_B 0xFFC40198 /* SPORT1 'B' Multichannel Select Register (Channels 96-127) */ +#define SPORT1_CNT_B 0xFFC4019C /* SPORT1 'B' Frame Sync And Clock Divisor Current Count */ +#define SPORT1_ERR_B 0xFFC401A0 /* SPORT1 'B' Error Register */ +#define SPORT1_MSTAT_B 0xFFC401A4 /* SPORT1 'B' Multichannel Mode Status Register */ +#define SPORT1_CTL2_B 0xFFC401A8 /* SPORT1 'B' Control Register 2 */ +#define SPORT1_TXPRI_B 0xFFC401C0 /* SPORT1 'B' Primary Channel Transmit Buffer Register */ +#define SPORT1_RXPRI_B 0xFFC401C4 /* SPORT1 'B' Primary Channel Receive Buffer Register */ +#define SPORT1_TXSEC_B 0xFFC401C8 /* SPORT1 'B' Secondary Channel Transmit Buffer Register */ +#define SPORT1_RXSEC_B 0xFFC401CC /* SPORT1 'B' Secondary Channel Receive Buffer Register */ + +/* ========================= + SPORT2 + ========================= */ +#define SPORT2_CTL_A 0xFFC40200 /* SPORT2 'A' Control Register */ +#define SPORT2_DIV_A 0xFFC40204 /* SPORT2 'A' Clock and FS Divide Register */ +#define SPORT2_MCTL_A 0xFFC40208 /* SPORT2 'A' Multichannel Control Register */ +#define SPORT2_CS0_A 0xFFC4020C /* SPORT2 'A' Multichannel Select Register (Channels 0-31) */ +#define SPORT2_CS1_A 0xFFC40210 /* SPORT2 'A' Multichannel Select Register (Channels 32-63) */ +#define SPORT2_CS2_A 0xFFC40214 /* SPORT2 'A' Multichannel Select Register (Channels 64-95) */ +#define SPORT2_CS3_A 0xFFC40218 /* SPORT2 'A' Multichannel Select Register (Channels 96-127) */ +#define SPORT2_CNT_A 0xFFC4021C /* SPORT2 'A' Frame Sync And Clock Divisor Current Count */ +#define SPORT2_ERR_A 0xFFC40220 /* SPORT2 'A' Error Register */ +#define SPORT2_MSTAT_A 0xFFC40224 /* SPORT2 'A' Multichannel Mode Status Register */ +#define SPORT2_CTL2_A 0xFFC40228 /* SPORT2 'A' Control Register 2 */ +#define SPORT2_TXPRI_A 0xFFC40240 /* SPORT2 'A' Primary Channel Transmit Buffer Register */ +#define SPORT2_RXPRI_A 0xFFC40244 /* SPORT2 'A' Primary Channel Receive Buffer Register */ +#define SPORT2_TXSEC_A 0xFFC40248 /* SPORT2 'A' Secondary Channel Transmit Buffer Register */ +#define SPORT2_RXSEC_A 0xFFC4024C /* SPORT2 'A' Secondary Channel Receive Buffer Register */ +#define SPORT2_CTL_B 0xFFC40280 /* SPORT2 'B' Control Register */ +#define SPORT2_DIV_B 0xFFC40284 /* SPORT2 'B' Clock and FS Divide Register */ +#define SPORT2_MCTL_B 0xFFC40288 /* SPORT2 'B' Multichannel Control Register */ +#define SPORT2_CS0_B 0xFFC4028C /* SPORT2 'B' Multichannel Select Register (Channels 0-31) */ +#define SPORT2_CS1_B 0xFFC40290 /* SPORT2 'B' Multichannel Select Register (Channels 32-63) */ +#define SPORT2_CS2_B 0xFFC40294 /* SPORT2 'B' Multichannel Select Register (Channels 64-95) */ +#define SPORT2_CS3_B 0xFFC40298 /* SPORT2 'B' Multichannel Select Register (Channels 96-127) */ +#define SPORT2_CNT_B 0xFFC4029C /* SPORT2 'B' Frame Sync And Clock Divisor Current Count */ +#define SPORT2_ERR_B 0xFFC402A0 /* SPORT2 'B' Error Register */ +#define SPORT2_MSTAT_B 0xFFC402A4 /* SPORT2 'B' Multichannel Mode Status Register */ +#define SPORT2_CTL2_B 0xFFC402A8 /* SPORT2 'B' Control Register 2 */ +#define SPORT2_TXPRI_B 0xFFC402C0 /* SPORT2 'B' Primary Channel Transmit Buffer Register */ +#define SPORT2_RXPRI_B 0xFFC402C4 /* SPORT2 'B' Primary Channel Receive Buffer Register */ +#define SPORT2_TXSEC_B 0xFFC402C8 /* SPORT2 'B' Secondary Channel Transmit Buffer Register */ +#define SPORT2_RXSEC_B 0xFFC402CC /* SPORT2 'B' Secondary Channel Receive Buffer Register */ + +/* ========================= + EPPI Registers + ========================= */ + +/* ========================= + EPPI0 + ========================= */ +#define EPPI0_STAT 0xFFC18000 /* EPPI0 Status Register */ +#define EPPI0_HCNT 0xFFC18004 /* EPPI0 Horizontal Transfer Count Register */ +#define EPPI0_HDLY 0xFFC18008 /* EPPI0 Horizontal Delay Count Register */ +#define EPPI0_VCNT 0xFFC1800C /* EPPI0 Vertical Transfer Count Register */ +#define EPPI0_VDLY 0xFFC18010 /* EPPI0 Vertical Delay Count Register */ +#define EPPI0_FRAME 0xFFC18014 /* EPPI0 Lines Per Frame Register */ +#define EPPI0_LINE 0xFFC18018 /* EPPI0 Samples Per Line Register */ +#define EPPI0_CLKDIV 0xFFC1801C /* EPPI0 Clock Divide Register */ +#define EPPI0_CTL 0xFFC18020 /* EPPI0 Control Register */ +#define EPPI0_FS1_WLHB 0xFFC18024 /* EPPI0 FS1 Width Register / EPPI Horizontal Blanking Samples Per Line Register */ +#define EPPI0_FS1_PASPL 0xFFC18028 /* EPPI0 FS1 Period Register / EPPI Active Samples Per Line Register */ +#define EPPI0_FS2_WLVB 0xFFC1802C /* EPPI0 FS2 Width Register / EPPI Lines Of Vertical Blanking Register */ +#define EPPI0_FS2_PALPF 0xFFC18030 /* EPPI0 FS2 Period Register / EPPI Active Lines Per Field Register */ +#define EPPI0_IMSK 0xFFC18034 /* EPPI0 Interrupt Mask Register */ +#define EPPI0_ODDCLIP 0xFFC1803C /* EPPI0 Clipping Register for ODD (Chroma) Data */ +#define EPPI0_EVENCLIP 0xFFC18040 /* EPPI0 Clipping Register for EVEN (Luma) Data */ +#define EPPI0_FS1_DLY 0xFFC18044 /* EPPI0 Frame Sync 1 Delay Value */ +#define EPPI0_FS2_DLY 0xFFC18048 /* EPPI0 Frame Sync 2 Delay Value */ +#define EPPI0_CTL2 0xFFC1804C /* EPPI0 Control Register 2 */ + +/* ========================= + EPPI1 + ========================= */ +#define EPPI1_STAT 0xFFC18400 /* EPPI1 Status Register */ +#define EPPI1_HCNT 0xFFC18404 /* EPPI1 Horizontal Transfer Count Register */ +#define EPPI1_HDLY 0xFFC18408 /* EPPI1 Horizontal Delay Count Register */ +#define EPPI1_VCNT 0xFFC1840C /* EPPI1 Vertical Transfer Count Register */ +#define EPPI1_VDLY 0xFFC18410 /* EPPI1 Vertical Delay Count Register */ +#define EPPI1_FRAME 0xFFC18414 /* EPPI1 Lines Per Frame Register */ +#define EPPI1_LINE 0xFFC18418 /* EPPI1 Samples Per Line Register */ +#define EPPI1_CLKDIV 0xFFC1841C /* EPPI1 Clock Divide Register */ +#define EPPI1_CTL 0xFFC18420 /* EPPI1 Control Register */ +#define EPPI1_FS1_WLHB 0xFFC18424 /* EPPI1 FS1 Width Register / EPPI Horizontal Blanking Samples Per Line Register */ +#define EPPI1_FS1_PASPL 0xFFC18428 /* EPPI1 FS1 Period Register / EPPI Active Samples Per Line Register */ +#define EPPI1_FS2_WLVB 0xFFC1842C /* EPPI1 FS2 Width Register / EPPI Lines Of Vertical Blanking Register */ +#define EPPI1_FS2_PALPF 0xFFC18430 /* EPPI1 FS2 Period Register / EPPI Active Lines Per Field Register */ +#define EPPI1_IMSK 0xFFC18434 /* EPPI1 Interrupt Mask Register */ +#define EPPI1_ODDCLIP 0xFFC1843C /* EPPI1 Clipping Register for ODD (Chroma) Data */ +#define EPPI1_EVENCLIP 0xFFC18440 /* EPPI1 Clipping Register for EVEN (Luma) Data */ +#define EPPI1_FS1_DLY 0xFFC18444 /* EPPI1 Frame Sync 1 Delay Value */ +#define EPPI1_FS2_DLY 0xFFC18448 /* EPPI1 Frame Sync 2 Delay Value */ +#define EPPI1_CTL2 0xFFC1844C /* EPPI1 Control Register 2 */ + +/* ========================= + EPPI2 + ========================= */ +#define EPPI2_STAT 0xFFC18800 /* EPPI2 Status Register */ +#define EPPI2_HCNT 0xFFC18804 /* EPPI2 Horizontal Transfer Count Register */ +#define EPPI2_HDLY 0xFFC18808 /* EPPI2 Horizontal Delay Count Register */ +#define EPPI2_VCNT 0xFFC1880C /* EPPI2 Vertical Transfer Count Register */ +#define EPPI2_VDLY 0xFFC18810 /* EPPI2 Vertical Delay Count Register */ +#define EPPI2_FRAME 0xFFC18814 /* EPPI2 Lines Per Frame Register */ +#define EPPI2_LINE 0xFFC18818 /* EPPI2 Samples Per Line Register */ +#define EPPI2_CLKDIV 0xFFC1881C /* EPPI2 Clock Divide Register */ +#define EPPI2_CTL 0xFFC18820 /* EPPI2 Control Register */ +#define EPPI2_FS1_WLHB 0xFFC18824 /* EPPI2 FS1 Width Register / EPPI Horizontal Blanking Samples Per Line Register */ +#define EPPI2_FS1_PASPL 0xFFC18828 /* EPPI2 FS1 Period Register / EPPI Active Samples Per Line Register */ +#define EPPI2_FS2_WLVB 0xFFC1882C /* EPPI2 FS2 Width Register / EPPI Lines Of Vertical Blanking Register */ +#define EPPI2_FS2_PALPF 0xFFC18830 /* EPPI2 FS2 Period Register / EPPI Active Lines Per Field Register */ +#define EPPI2_IMSK 0xFFC18834 /* EPPI2 Interrupt Mask Register */ +#define EPPI2_ODDCLIP 0xFFC1883C /* EPPI2 Clipping Register for ODD (Chroma) Data */ +#define EPPI2_EVENCLIP 0xFFC18840 /* EPPI2 Clipping Register for EVEN (Luma) Data */ +#define EPPI2_FS1_DLY 0xFFC18844 /* EPPI2 Frame Sync 1 Delay Value */ +#define EPPI2_FS2_DLY 0xFFC18848 /* EPPI2 Frame Sync 2 Delay Value */ +#define EPPI2_CTL2 0xFFC1884C /* EPPI2 Control Register 2 */ + + + +/* ========================= + DDE Registers + ========================= */ + +/* ========================= + DMA0 + ========================= */ +#define DMA0_NEXT_DESC_PTR 0xFFC41000 /* DMA0 Pointer to Next Initial Descriptor */ +#define DMA0_START_ADDR 0xFFC41004 /* DMA0 Start Address of Current Buffer */ +#define DMA0_CONFIG 0xFFC41008 /* DMA0 Configuration Register */ +#define DMA0_X_COUNT 0xFFC4100C /* DMA0 Inner Loop Count Start Value */ +#define DMA0_X_MODIFY 0xFFC41010 /* DMA0 Inner Loop Address Increment */ +#define DMA0_Y_COUNT 0xFFC41014 /* DMA0 Outer Loop Count Start Value (2D only) */ +#define DMA0_Y_MODIFY 0xFFC41018 /* DMA0 Outer Loop Address Increment (2D only) */ +#define DMA0_CURR_DESC_PTR 0xFFC41024 /* DMA0 Current Descriptor Pointer */ +#define DMA0_PREV_DESC_PTR 0xFFC41028 /* DMA0 Previous Initial Descriptor Pointer */ +#define DMA0_CURR_ADDR 0xFFC4102C /* DMA0 Current Address */ +#define DMA0_IRQ_STATUS 0xFFC41030 /* DMA0 Status Register */ +#define DMA0_CURR_X_COUNT 0xFFC41034 /* DMA0 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA0_CURR_Y_COUNT 0xFFC41038 /* DMA0 Current Row Count (2D only) */ +#define DMA0_BWL_COUNT 0xFFC41040 /* DMA0 Bandwidth Limit Count */ +#define DMA0_CURR_BWL_COUNT 0xFFC41044 /* DMA0 Bandwidth Limit Count Current */ +#define DMA0_BWM_COUNT 0xFFC41048 /* DMA0 Bandwidth Monitor Count */ +#define DMA0_CURR_BWM_COUNT 0xFFC4104C /* DMA0 Bandwidth Monitor Count Current */ + +/* ========================= + DMA1 + ========================= */ +#define DMA1_NEXT_DESC_PTR 0xFFC41080 /* DMA1 Pointer to Next Initial Descriptor */ +#define DMA1_START_ADDR 0xFFC41084 /* DMA1 Start Address of Current Buffer */ +#define DMA1_CONFIG 0xFFC41088 /* DMA1 Configuration Register */ +#define DMA1_X_COUNT 0xFFC4108C /* DMA1 Inner Loop Count Start Value */ +#define DMA1_X_MODIFY 0xFFC41090 /* DMA1 Inner Loop Address Increment */ +#define DMA1_Y_COUNT 0xFFC41094 /* DMA1 Outer Loop Count Start Value (2D only) */ +#define DMA1_Y_MODIFY 0xFFC41098 /* DMA1 Outer Loop Address Increment (2D only) */ +#define DMA1_CURR_DESC_PTR 0xFFC410A4 /* DMA1 Current Descriptor Pointer */ +#define DMA1_PREV_DESC_PTR 0xFFC410A8 /* DMA1 Previous Initial Descriptor Pointer */ +#define DMA1_CURR_ADDR 0xFFC410AC /* DMA1 Current Address */ +#define DMA1_IRQ_STATUS 0xFFC410B0 /* DMA1 Status Register */ +#define DMA1_CURR_X_COUNT 0xFFC410B4 /* DMA1 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA1_CURR_Y_COUNT 0xFFC410B8 /* DMA1 Current Row Count (2D only) */ +#define DMA1_BWL_COUNT 0xFFC410C0 /* DMA1 Bandwidth Limit Count */ +#define DMA1_CURR_BWL_COUNT 0xFFC410C4 /* DMA1 Bandwidth Limit Count Current */ +#define DMA1_BWM_COUNT 0xFFC410C8 /* DMA1 Bandwidth Monitor Count */ +#define DMA1_CURR_BWM_COUNT 0xFFC410CC /* DMA1 Bandwidth Monitor Count Current */ + +/* ========================= + DMA2 + ========================= */ +#define DMA2_NEXT_DESC_PTR 0xFFC41100 /* DMA2 Pointer to Next Initial Descriptor */ +#define DMA2_START_ADDR 0xFFC41104 /* DMA2 Start Address of Current Buffer */ +#define DMA2_CONFIG 0xFFC41108 /* DMA2 Configuration Register */ +#define DMA2_X_COUNT 0xFFC4110C /* DMA2 Inner Loop Count Start Value */ +#define DMA2_X_MODIFY 0xFFC41110 /* DMA2 Inner Loop Address Increment */ +#define DMA2_Y_COUNT 0xFFC41114 /* DMA2 Outer Loop Count Start Value (2D only) */ +#define DMA2_Y_MODIFY 0xFFC41118 /* DMA2 Outer Loop Address Increment (2D only) */ +#define DMA2_CURR_DESC_PTR 0xFFC41124 /* DMA2 Current Descriptor Pointer */ +#define DMA2_PREV_DESC_PTR 0xFFC41128 /* DMA2 Previous Initial Descriptor Pointer */ +#define DMA2_CURR_ADDR 0xFFC4112C /* DMA2 Current Address */ +#define DMA2_IRQ_STATUS 0xFFC41130 /* DMA2 Status Register */ +#define DMA2_CURR_X_COUNT 0xFFC41134 /* DMA2 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA2_CURR_Y_COUNT 0xFFC41138 /* DMA2 Current Row Count (2D only) */ +#define DMA2_BWL_COUNT 0xFFC41140 /* DMA2 Bandwidth Limit Count */ +#define DMA2_CURR_BWL_COUNT 0xFFC41144 /* DMA2 Bandwidth Limit Count Current */ +#define DMA2_BWM_COUNT 0xFFC41148 /* DMA2 Bandwidth Monitor Count */ +#define DMA2_CURR_BWM_COUNT 0xFFC4114C /* DMA2 Bandwidth Monitor Count Current */ + +/* ========================= + DMA3 + ========================= */ +#define DMA3_NEXT_DESC_PTR 0xFFC41180 /* DMA3 Pointer to Next Initial Descriptor */ +#define DMA3_START_ADDR 0xFFC41184 /* DMA3 Start Address of Current Buffer */ +#define DMA3_CONFIG 0xFFC41188 /* DMA3 Configuration Register */ +#define DMA3_X_COUNT 0xFFC4118C /* DMA3 Inner Loop Count Start Value */ +#define DMA3_X_MODIFY 0xFFC41190 /* DMA3 Inner Loop Address Increment */ +#define DMA3_Y_COUNT 0xFFC41194 /* DMA3 Outer Loop Count Start Value (2D only) */ +#define DMA3_Y_MODIFY 0xFFC41198 /* DMA3 Outer Loop Address Increment (2D only) */ +#define DMA3_CURR_DESC_PTR 0xFFC411A4 /* DMA3 Current Descriptor Pointer */ +#define DMA3_PREV_DESC_PTR 0xFFC411A8 /* DMA3 Previous Initial Descriptor Pointer */ +#define DMA3_CURR_ADDR 0xFFC411AC /* DMA3 Current Address */ +#define DMA3_IRQ_STATUS 0xFFC411B0 /* DMA3 Status Register */ +#define DMA3_CURR_X_COUNT 0xFFC411B4 /* DMA3 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA3_CURR_Y_COUNT 0xFFC411B8 /* DMA3 Current Row Count (2D only) */ +#define DMA3_BWL_COUNT 0xFFC411C0 /* DMA3 Bandwidth Limit Count */ +#define DMA3_CURR_BWL_COUNT 0xFFC411C4 /* DMA3 Bandwidth Limit Count Current */ +#define DMA3_BWM_COUNT 0xFFC411C8 /* DMA3 Bandwidth Monitor Count */ +#define DMA3_CURR_BWM_COUNT 0xFFC411CC /* DMA3 Bandwidth Monitor Count Current */ + +/* ========================= + DMA4 + ========================= */ +#define DMA4_NEXT_DESC_PTR 0xFFC41200 /* DMA4 Pointer to Next Initial Descriptor */ +#define DMA4_START_ADDR 0xFFC41204 /* DMA4 Start Address of Current Buffer */ +#define DMA4_CONFIG 0xFFC41208 /* DMA4 Configuration Register */ +#define DMA4_X_COUNT 0xFFC4120C /* DMA4 Inner Loop Count Start Value */ +#define DMA4_X_MODIFY 0xFFC41210 /* DMA4 Inner Loop Address Increment */ +#define DMA4_Y_COUNT 0xFFC41214 /* DMA4 Outer Loop Count Start Value (2D only) */ +#define DMA4_Y_MODIFY 0xFFC41218 /* DMA4 Outer Loop Address Increment (2D only) */ +#define DMA4_CURR_DESC_PTR 0xFFC41224 /* DMA4 Current Descriptor Pointer */ +#define DMA4_PREV_DESC_PTR 0xFFC41228 /* DMA4 Previous Initial Descriptor Pointer */ +#define DMA4_CURR_ADDR 0xFFC4122C /* DMA4 Current Address */ +#define DMA4_IRQ_STATUS 0xFFC41230 /* DMA4 Status Register */ +#define DMA4_CURR_X_COUNT 0xFFC41234 /* DMA4 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA4_CURR_Y_COUNT 0xFFC41238 /* DMA4 Current Row Count (2D only) */ +#define DMA4_BWL_COUNT 0xFFC41240 /* DMA4 Bandwidth Limit Count */ +#define DMA4_CURR_BWL_COUNT 0xFFC41244 /* DMA4 Bandwidth Limit Count Current */ +#define DMA4_BWM_COUNT 0xFFC41248 /* DMA4 Bandwidth Monitor Count */ +#define DMA4_CURR_BWM_COUNT 0xFFC4124C /* DMA4 Bandwidth Monitor Count Current */ + +/* ========================= + DMA5 + ========================= */ +#define DMA5_NEXT_DESC_PTR 0xFFC41280 /* DMA5 Pointer to Next Initial Descriptor */ +#define DMA5_START_ADDR 0xFFC41284 /* DMA5 Start Address of Current Buffer */ +#define DMA5_CONFIG 0xFFC41288 /* DMA5 Configuration Register */ +#define DMA5_X_COUNT 0xFFC4128C /* DMA5 Inner Loop Count Start Value */ +#define DMA5_X_MODIFY 0xFFC41290 /* DMA5 Inner Loop Address Increment */ +#define DMA5_Y_COUNT 0xFFC41294 /* DMA5 Outer Loop Count Start Value (2D only) */ +#define DMA5_Y_MODIFY 0xFFC41298 /* DMA5 Outer Loop Address Increment (2D only) */ +#define DMA5_CURR_DESC_PTR 0xFFC412A4 /* DMA5 Current Descriptor Pointer */ +#define DMA5_PREV_DESC_PTR 0xFFC412A8 /* DMA5 Previous Initial Descriptor Pointer */ +#define DMA5_CURR_ADDR 0xFFC412AC /* DMA5 Current Address */ +#define DMA5_IRQ_STATUS 0xFFC412B0 /* DMA5 Status Register */ +#define DMA5_CURR_X_COUNT 0xFFC412B4 /* DMA5 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA5_CURR_Y_COUNT 0xFFC412B8 /* DMA5 Current Row Count (2D only) */ +#define DMA5_BWL_COUNT 0xFFC412C0 /* DMA5 Bandwidth Limit Count */ +#define DMA5_CURR_BWL_COUNT 0xFFC412C4 /* DMA5 Bandwidth Limit Count Current */ +#define DMA5_BWM_COUNT 0xFFC412C8 /* DMA5 Bandwidth Monitor Count */ +#define DMA5_CURR_BWM_COUNT 0xFFC412CC /* DMA5 Bandwidth Monitor Count Current */ + +/* ========================= + DMA6 + ========================= */ +#define DMA6_NEXT_DESC_PTR 0xFFC41300 /* DMA6 Pointer to Next Initial Descriptor */ +#define DMA6_START_ADDR 0xFFC41304 /* DMA6 Start Address of Current Buffer */ +#define DMA6_CONFIG 0xFFC41308 /* DMA6 Configuration Register */ +#define DMA6_X_COUNT 0xFFC4130C /* DMA6 Inner Loop Count Start Value */ +#define DMA6_X_MODIFY 0xFFC41310 /* DMA6 Inner Loop Address Increment */ +#define DMA6_Y_COUNT 0xFFC41314 /* DMA6 Outer Loop Count Start Value (2D only) */ +#define DMA6_Y_MODIFY 0xFFC41318 /* DMA6 Outer Loop Address Increment (2D only) */ +#define DMA6_CURR_DESC_PTR 0xFFC41324 /* DMA6 Current Descriptor Pointer */ +#define DMA6_PREV_DESC_PTR 0xFFC41328 /* DMA6 Previous Initial Descriptor Pointer */ +#define DMA6_CURR_ADDR 0xFFC4132C /* DMA6 Current Address */ +#define DMA6_IRQ_STATUS 0xFFC41330 /* DMA6 Status Register */ +#define DMA6_CURR_X_COUNT 0xFFC41334 /* DMA6 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA6_CURR_Y_COUNT 0xFFC41338 /* DMA6 Current Row Count (2D only) */ +#define DMA6_BWL_COUNT 0xFFC41340 /* DMA6 Bandwidth Limit Count */ +#define DMA6_CURR_BWL_COUNT 0xFFC41344 /* DMA6 Bandwidth Limit Count Current */ +#define DMA6_BWM_COUNT 0xFFC41348 /* DMA6 Bandwidth Monitor Count */ +#define DMA6_CURR_BWM_COUNT 0xFFC4134C /* DMA6 Bandwidth Monitor Count Current */ + +/* ========================= + DMA7 + ========================= */ +#define DMA7_NEXT_DESC_PTR 0xFFC41380 /* DMA7 Pointer to Next Initial Descriptor */ +#define DMA7_START_ADDR 0xFFC41384 /* DMA7 Start Address of Current Buffer */ +#define DMA7_CONFIG 0xFFC41388 /* DMA7 Configuration Register */ +#define DMA7_X_COUNT 0xFFC4138C /* DMA7 Inner Loop Count Start Value */ +#define DMA7_X_MODIFY 0xFFC41390 /* DMA7 Inner Loop Address Increment */ +#define DMA7_Y_COUNT 0xFFC41394 /* DMA7 Outer Loop Count Start Value (2D only) */ +#define DMA7_Y_MODIFY 0xFFC41398 /* DMA7 Outer Loop Address Increment (2D only) */ +#define DMA7_CURR_DESC_PTR 0xFFC413A4 /* DMA7 Current Descriptor Pointer */ +#define DMA7_PREV_DESC_PTR 0xFFC413A8 /* DMA7 Previous Initial Descriptor Pointer */ +#define DMA7_CURR_ADDR 0xFFC413AC /* DMA7 Current Address */ +#define DMA7_IRQ_STATUS 0xFFC413B0 /* DMA7 Status Register */ +#define DMA7_CURR_X_COUNT 0xFFC413B4 /* DMA7 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA7_CURR_Y_COUNT 0xFFC413B8 /* DMA7 Current Row Count (2D only) */ +#define DMA7_BWL_COUNT 0xFFC413C0 /* DMA7 Bandwidth Limit Count */ +#define DMA7_CURR_BWL_COUNT 0xFFC413C4 /* DMA7 Bandwidth Limit Count Current */ +#define DMA7_BWM_COUNT 0xFFC413C8 /* DMA7 Bandwidth Monitor Count */ +#define DMA7_CURR_BWM_COUNT 0xFFC413CC /* DMA7 Bandwidth Monitor Count Current */ + +/* ========================= + DMA8 + ========================= */ +#define DMA8_NEXT_DESC_PTR 0xFFC41400 /* DMA8 Pointer to Next Initial Descriptor */ +#define DMA8_START_ADDR 0xFFC41404 /* DMA8 Start Address of Current Buffer */ +#define DMA8_CONFIG 0xFFC41408 /* DMA8 Configuration Register */ +#define DMA8_X_COUNT 0xFFC4140C /* DMA8 Inner Loop Count Start Value */ +#define DMA8_X_MODIFY 0xFFC41410 /* DMA8 Inner Loop Address Increment */ +#define DMA8_Y_COUNT 0xFFC41414 /* DMA8 Outer Loop Count Start Value (2D only) */ +#define DMA8_Y_MODIFY 0xFFC41418 /* DMA8 Outer Loop Address Increment (2D only) */ +#define DMA8_CURR_DESC_PTR 0xFFC41424 /* DMA8 Current Descriptor Pointer */ +#define DMA8_PREV_DESC_PTR 0xFFC41428 /* DMA8 Previous Initial Descriptor Pointer */ +#define DMA8_CURR_ADDR 0xFFC4142C /* DMA8 Current Address */ +#define DMA8_IRQ_STATUS 0xFFC41430 /* DMA8 Status Register */ +#define DMA8_CURR_X_COUNT 0xFFC41434 /* DMA8 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA8_CURR_Y_COUNT 0xFFC41438 /* DMA8 Current Row Count (2D only) */ +#define DMA8_BWL_COUNT 0xFFC41440 /* DMA8 Bandwidth Limit Count */ +#define DMA8_CURR_BWL_COUNT 0xFFC41444 /* DMA8 Bandwidth Limit Count Current */ +#define DMA8_BWM_COUNT 0xFFC41448 /* DMA8 Bandwidth Monitor Count */ +#define DMA8_CURR_BWM_COUNT 0xFFC4144C /* DMA8 Bandwidth Monitor Count Current */ + +/* ========================= + DMA9 + ========================= */ +#define DMA9_NEXT_DESC_PTR 0xFFC41480 /* DMA9 Pointer to Next Initial Descriptor */ +#define DMA9_START_ADDR 0xFFC41484 /* DMA9 Start Address of Current Buffer */ +#define DMA9_CONFIG 0xFFC41488 /* DMA9 Configuration Register */ +#define DMA9_X_COUNT 0xFFC4148C /* DMA9 Inner Loop Count Start Value */ +#define DMA9_X_MODIFY 0xFFC41490 /* DMA9 Inner Loop Address Increment */ +#define DMA9_Y_COUNT 0xFFC41494 /* DMA9 Outer Loop Count Start Value (2D only) */ +#define DMA9_Y_MODIFY 0xFFC41498 /* DMA9 Outer Loop Address Increment (2D only) */ +#define DMA9_CURR_DESC_PTR 0xFFC414A4 /* DMA9 Current Descriptor Pointer */ +#define DMA9_PREV_DESC_PTR 0xFFC414A8 /* DMA9 Previous Initial Descriptor Pointer */ +#define DMA9_CURR_ADDR 0xFFC414AC /* DMA9 Current Address */ +#define DMA9_IRQ_STATUS 0xFFC414B0 /* DMA9 Status Register */ +#define DMA9_CURR_X_COUNT 0xFFC414B4 /* DMA9 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA9_CURR_Y_COUNT 0xFFC414B8 /* DMA9 Current Row Count (2D only) */ +#define DMA9_BWL_COUNT 0xFFC414C0 /* DMA9 Bandwidth Limit Count */ +#define DMA9_CURR_BWL_COUNT 0xFFC414C4 /* DMA9 Bandwidth Limit Count Current */ +#define DMA9_BWM_COUNT 0xFFC414C8 /* DMA9 Bandwidth Monitor Count */ +#define DMA9_CURR_BWM_COUNT 0xFFC414CC /* DMA9 Bandwidth Monitor Count Current */ + +/* ========================= + DMA10 + ========================= */ +#define DMA10_NEXT_DESC_PTR 0xFFC05000 /* DMA10 Pointer to Next Initial Descriptor */ +#define DMA10_START_ADDR 0xFFC05004 /* DMA10 Start Address of Current Buffer */ +#define DMA10_CONFIG 0xFFC05008 /* DMA10 Configuration Register */ +#define DMA10_X_COUNT 0xFFC0500C /* DMA10 Inner Loop Count Start Value */ +#define DMA10_X_MODIFY 0xFFC05010 /* DMA10 Inner Loop Address Increment */ +#define DMA10_Y_COUNT 0xFFC05014 /* DMA10 Outer Loop Count Start Value (2D only) */ +#define DMA10_Y_MODIFY 0xFFC05018 /* DMA10 Outer Loop Address Increment (2D only) */ +#define DMA10_CURR_DESC_PTR 0xFFC05024 /* DMA10 Current Descriptor Pointer */ +#define DMA10_PREV_DESC_PTR 0xFFC05028 /* DMA10 Previous Initial Descriptor Pointer */ +#define DMA10_CURR_ADDR 0xFFC0502C /* DMA10 Current Address */ +#define DMA10_IRQ_STATUS 0xFFC05030 /* DMA10 Status Register */ +#define DMA10_CURR_X_COUNT 0xFFC05034 /* DMA10 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA10_CURR_Y_COUNT 0xFFC05038 /* DMA10 Current Row Count (2D only) */ +#define DMA10_BWL_COUNT 0xFFC05040 /* DMA10 Bandwidth Limit Count */ +#define DMA10_CURR_BWL_COUNT 0xFFC05044 /* DMA10 Bandwidth Limit Count Current */ +#define DMA10_BWM_COUNT 0xFFC05048 /* DMA10 Bandwidth Monitor Count */ +#define DMA10_CURR_BWM_COUNT 0xFFC0504C /* DMA10 Bandwidth Monitor Count Current */ + +/* ========================= + DMA11 + ========================= */ +#define DMA11_NEXT_DESC_PTR 0xFFC05080 /* DMA11 Pointer to Next Initial Descriptor */ +#define DMA11_START_ADDR 0xFFC05084 /* DMA11 Start Address of Current Buffer */ +#define DMA11_CONFIG 0xFFC05088 /* DMA11 Configuration Register */ +#define DMA11_X_COUNT 0xFFC0508C /* DMA11 Inner Loop Count Start Value */ +#define DMA11_X_MODIFY 0xFFC05090 /* DMA11 Inner Loop Address Increment */ +#define DMA11_Y_COUNT 0xFFC05094 /* DMA11 Outer Loop Count Start Value (2D only) */ +#define DMA11_Y_MODIFY 0xFFC05098 /* DMA11 Outer Loop Address Increment (2D only) */ +#define DMA11_CURR_DESC_PTR 0xFFC050A4 /* DMA11 Current Descriptor Pointer */ +#define DMA11_PREV_DESC_PTR 0xFFC050A8 /* DMA11 Previous Initial Descriptor Pointer */ +#define DMA11_CURR_ADDR 0xFFC050AC /* DMA11 Current Address */ +#define DMA11_IRQ_STATUS 0xFFC050B0 /* DMA11 Status Register */ +#define DMA11_CURR_X_COUNT 0xFFC050B4 /* DMA11 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA11_CURR_Y_COUNT 0xFFC050B8 /* DMA11 Current Row Count (2D only) */ +#define DMA11_BWL_COUNT 0xFFC050C0 /* DMA11 Bandwidth Limit Count */ +#define DMA11_CURR_BWL_COUNT 0xFFC050C4 /* DMA11 Bandwidth Limit Count Current */ +#define DMA11_BWM_COUNT 0xFFC050C8 /* DMA11 Bandwidth Monitor Count */ +#define DMA11_CURR_BWM_COUNT 0xFFC050CC /* DMA11 Bandwidth Monitor Count Current */ + +/* ========================= + DMA12 + ========================= */ +#define DMA12_NEXT_DESC_PTR 0xFFC05100 /* DMA12 Pointer to Next Initial Descriptor */ +#define DMA12_START_ADDR 0xFFC05104 /* DMA12 Start Address of Current Buffer */ +#define DMA12_CONFIG 0xFFC05108 /* DMA12 Configuration Register */ +#define DMA12_X_COUNT 0xFFC0510C /* DMA12 Inner Loop Count Start Value */ +#define DMA12_X_MODIFY 0xFFC05110 /* DMA12 Inner Loop Address Increment */ +#define DMA12_Y_COUNT 0xFFC05114 /* DMA12 Outer Loop Count Start Value (2D only) */ +#define DMA12_Y_MODIFY 0xFFC05118 /* DMA12 Outer Loop Address Increment (2D only) */ +#define DMA12_CURR_DESC_PTR 0xFFC05124 /* DMA12 Current Descriptor Pointer */ +#define DMA12_PREV_DESC_PTR 0xFFC05128 /* DMA12 Previous Initial Descriptor Pointer */ +#define DMA12_CURR_ADDR 0xFFC0512C /* DMA12 Current Address */ +#define DMA12_IRQ_STATUS 0xFFC05130 /* DMA12 Status Register */ +#define DMA12_CURR_X_COUNT 0xFFC05134 /* DMA12 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA12_CURR_Y_COUNT 0xFFC05138 /* DMA12 Current Row Count (2D only) */ +#define DMA12_BWL_COUNT 0xFFC05140 /* DMA12 Bandwidth Limit Count */ +#define DMA12_CURR_BWL_COUNT 0xFFC05144 /* DMA12 Bandwidth Limit Count Current */ +#define DMA12_BWM_COUNT 0xFFC05148 /* DMA12 Bandwidth Monitor Count */ +#define DMA12_CURR_BWM_COUNT 0xFFC0514C /* DMA12 Bandwidth Monitor Count Current */ + +/* ========================= + DMA13 + ========================= */ +#define DMA13_NEXT_DESC_PTR 0xFFC07000 /* DMA13 Pointer to Next Initial Descriptor */ +#define DMA13_START_ADDR 0xFFC07004 /* DMA13 Start Address of Current Buffer */ +#define DMA13_CONFIG 0xFFC07008 /* DMA13 Configuration Register */ +#define DMA13_X_COUNT 0xFFC0700C /* DMA13 Inner Loop Count Start Value */ +#define DMA13_X_MODIFY 0xFFC07010 /* DMA13 Inner Loop Address Increment */ +#define DMA13_Y_COUNT 0xFFC07014 /* DMA13 Outer Loop Count Start Value (2D only) */ +#define DMA13_Y_MODIFY 0xFFC07018 /* DMA13 Outer Loop Address Increment (2D only) */ +#define DMA13_CURR_DESC_PTR 0xFFC07024 /* DMA13 Current Descriptor Pointer */ +#define DMA13_PREV_DESC_PTR 0xFFC07028 /* DMA13 Previous Initial Descriptor Pointer */ +#define DMA13_CURR_ADDR 0xFFC0702C /* DMA13 Current Address */ +#define DMA13_IRQ_STATUS 0xFFC07030 /* DMA13 Status Register */ +#define DMA13_CURR_X_COUNT 0xFFC07034 /* DMA13 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA13_CURR_Y_COUNT 0xFFC07038 /* DMA13 Current Row Count (2D only) */ +#define DMA13_BWL_COUNT 0xFFC07040 /* DMA13 Bandwidth Limit Count */ +#define DMA13_CURR_BWL_COUNT 0xFFC07044 /* DMA13 Bandwidth Limit Count Current */ +#define DMA13_BWM_COUNT 0xFFC07048 /* DMA13 Bandwidth Monitor Count */ +#define DMA13_CURR_BWM_COUNT 0xFFC0704C /* DMA13 Bandwidth Monitor Count Current */ + +/* ========================= + DMA14 + ========================= */ +#define DMA14_NEXT_DESC_PTR 0xFFC07080 /* DMA14 Pointer to Next Initial Descriptor */ +#define DMA14_START_ADDR 0xFFC07084 /* DMA14 Start Address of Current Buffer */ +#define DMA14_CONFIG 0xFFC07088 /* DMA14 Configuration Register */ +#define DMA14_X_COUNT 0xFFC0708C /* DMA14 Inner Loop Count Start Value */ +#define DMA14_X_MODIFY 0xFFC07090 /* DMA14 Inner Loop Address Increment */ +#define DMA14_Y_COUNT 0xFFC07094 /* DMA14 Outer Loop Count Start Value (2D only) */ +#define DMA14_Y_MODIFY 0xFFC07098 /* DMA14 Outer Loop Address Increment (2D only) */ +#define DMA14_CURR_DESC_PTR 0xFFC070A4 /* DMA14 Current Descriptor Pointer */ +#define DMA14_PREV_DESC_PTR 0xFFC070A8 /* DMA14 Previous Initial Descriptor Pointer */ +#define DMA14_CURR_ADDR 0xFFC070AC /* DMA14 Current Address */ +#define DMA14_IRQ_STATUS 0xFFC070B0 /* DMA14 Status Register */ +#define DMA14_CURR_X_COUNT 0xFFC070B4 /* DMA14 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA14_CURR_Y_COUNT 0xFFC070B8 /* DMA14 Current Row Count (2D only) */ +#define DMA14_BWL_COUNT 0xFFC070C0 /* DMA14 Bandwidth Limit Count */ +#define DMA14_CURR_BWL_COUNT 0xFFC070C4 /* DMA14 Bandwidth Limit Count Current */ +#define DMA14_BWM_COUNT 0xFFC070C8 /* DMA14 Bandwidth Monitor Count */ +#define DMA14_CURR_BWM_COUNT 0xFFC070CC /* DMA14 Bandwidth Monitor Count Current */ + +/* ========================= + DMA15 + ========================= */ +#define DMA15_NEXT_DESC_PTR 0xFFC07100 /* DMA15 Pointer to Next Initial Descriptor */ +#define DMA15_START_ADDR 0xFFC07104 /* DMA15 Start Address of Current Buffer */ +#define DMA15_CONFIG 0xFFC07108 /* DMA15 Configuration Register */ +#define DMA15_X_COUNT 0xFFC0710C /* DMA15 Inner Loop Count Start Value */ +#define DMA15_X_MODIFY 0xFFC07110 /* DMA15 Inner Loop Address Increment */ +#define DMA15_Y_COUNT 0xFFC07114 /* DMA15 Outer Loop Count Start Value (2D only) */ +#define DMA15_Y_MODIFY 0xFFC07118 /* DMA15 Outer Loop Address Increment (2D only) */ +#define DMA15_CURR_DESC_PTR 0xFFC07124 /* DMA15 Current Descriptor Pointer */ +#define DMA15_PREV_DESC_PTR 0xFFC07128 /* DMA15 Previous Initial Descriptor Pointer */ +#define DMA15_CURR_ADDR 0xFFC0712C /* DMA15 Current Address */ +#define DMA15_IRQ_STATUS 0xFFC07130 /* DMA15 Status Register */ +#define DMA15_CURR_X_COUNT 0xFFC07134 /* DMA15 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA15_CURR_Y_COUNT 0xFFC07138 /* DMA15 Current Row Count (2D only) */ +#define DMA15_BWL_COUNT 0xFFC07140 /* DMA15 Bandwidth Limit Count */ +#define DMA15_CURR_BWL_COUNT 0xFFC07144 /* DMA15 Bandwidth Limit Count Current */ +#define DMA15_BWM_COUNT 0xFFC07148 /* DMA15 Bandwidth Monitor Count */ +#define DMA15_CURR_BWM_COUNT 0xFFC0714C /* DMA15 Bandwidth Monitor Count Current */ + +/* ========================= + DMA16 + ========================= */ +#define DMA16_NEXT_DESC_PTR 0xFFC07180 /* DMA16 Pointer to Next Initial Descriptor */ +#define DMA16_START_ADDR 0xFFC07184 /* DMA16 Start Address of Current Buffer */ +#define DMA16_CONFIG 0xFFC07188 /* DMA16 Configuration Register */ +#define DMA16_X_COUNT 0xFFC0718C /* DMA16 Inner Loop Count Start Value */ +#define DMA16_X_MODIFY 0xFFC07190 /* DMA16 Inner Loop Address Increment */ +#define DMA16_Y_COUNT 0xFFC07194 /* DMA16 Outer Loop Count Start Value (2D only) */ +#define DMA16_Y_MODIFY 0xFFC07198 /* DMA16 Outer Loop Address Increment (2D only) */ +#define DMA16_CURR_DESC_PTR 0xFFC071A4 /* DMA16 Current Descriptor Pointer */ +#define DMA16_PREV_DESC_PTR 0xFFC071A8 /* DMA16 Previous Initial Descriptor Pointer */ +#define DMA16_CURR_ADDR 0xFFC071AC /* DMA16 Current Address */ +#define DMA16_IRQ_STATUS 0xFFC071B0 /* DMA16 Status Register */ +#define DMA16_CURR_X_COUNT 0xFFC071B4 /* DMA16 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA16_CURR_Y_COUNT 0xFFC071B8 /* DMA16 Current Row Count (2D only) */ +#define DMA16_BWL_COUNT 0xFFC071C0 /* DMA16 Bandwidth Limit Count */ +#define DMA16_CURR_BWL_COUNT 0xFFC071C4 /* DMA16 Bandwidth Limit Count Current */ +#define DMA16_BWM_COUNT 0xFFC071C8 /* DMA16 Bandwidth Monitor Count */ +#define DMA16_CURR_BWM_COUNT 0xFFC071CC /* DMA16 Bandwidth Monitor Count Current */ + +/* ========================= + DMA17 + ========================= */ +#define DMA17_NEXT_DESC_PTR 0xFFC07200 /* DMA17 Pointer to Next Initial Descriptor */ +#define DMA17_START_ADDR 0xFFC07204 /* DMA17 Start Address of Current Buffer */ +#define DMA17_CONFIG 0xFFC07208 /* DMA17 Configuration Register */ +#define DMA17_X_COUNT 0xFFC0720C /* DMA17 Inner Loop Count Start Value */ +#define DMA17_X_MODIFY 0xFFC07210 /* DMA17 Inner Loop Address Increment */ +#define DMA17_Y_COUNT 0xFFC07214 /* DMA17 Outer Loop Count Start Value (2D only) */ +#define DMA17_Y_MODIFY 0xFFC07218 /* DMA17 Outer Loop Address Increment (2D only) */ +#define DMA17_CURR_DESC_PTR 0xFFC07224 /* DMA17 Current Descriptor Pointer */ +#define DMA17_PREV_DESC_PTR 0xFFC07228 /* DMA17 Previous Initial Descriptor Pointer */ +#define DMA17_CURR_ADDR 0xFFC0722C /* DMA17 Current Address */ +#define DMA17_IRQ_STATUS 0xFFC07230 /* DMA17 Status Register */ +#define DMA17_CURR_X_COUNT 0xFFC07234 /* DMA17 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA17_CURR_Y_COUNT 0xFFC07238 /* DMA17 Current Row Count (2D only) */ +#define DMA17_BWL_COUNT 0xFFC07240 /* DMA17 Bandwidth Limit Count */ +#define DMA17_CURR_BWL_COUNT 0xFFC07244 /* DMA17 Bandwidth Limit Count Current */ +#define DMA17_BWM_COUNT 0xFFC07248 /* DMA17 Bandwidth Monitor Count */ +#define DMA17_CURR_BWM_COUNT 0xFFC0724C /* DMA17 Bandwidth Monitor Count Current */ + +/* ========================= + DMA18 + ========================= */ +#define DMA18_NEXT_DESC_PTR 0xFFC07280 /* DMA18 Pointer to Next Initial Descriptor */ +#define DMA18_START_ADDR 0xFFC07284 /* DMA18 Start Address of Current Buffer */ +#define DMA18_CONFIG 0xFFC07288 /* DMA18 Configuration Register */ +#define DMA18_X_COUNT 0xFFC0728C /* DMA18 Inner Loop Count Start Value */ +#define DMA18_X_MODIFY 0xFFC07290 /* DMA18 Inner Loop Address Increment */ +#define DMA18_Y_COUNT 0xFFC07294 /* DMA18 Outer Loop Count Start Value (2D only) */ +#define DMA18_Y_MODIFY 0xFFC07298 /* DMA18 Outer Loop Address Increment (2D only) */ +#define DMA18_CURR_DESC_PTR 0xFFC072A4 /* DMA18 Current Descriptor Pointer */ +#define DMA18_PREV_DESC_PTR 0xFFC072A8 /* DMA18 Previous Initial Descriptor Pointer */ +#define DMA18_CURR_ADDR 0xFFC072AC /* DMA18 Current Address */ +#define DMA18_IRQ_STATUS 0xFFC072B0 /* DMA18 Status Register */ +#define DMA18_CURR_X_COUNT 0xFFC072B4 /* DMA18 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA18_CURR_Y_COUNT 0xFFC072B8 /* DMA18 Current Row Count (2D only) */ +#define DMA18_BWL_COUNT 0xFFC072C0 /* DMA18 Bandwidth Limit Count */ +#define DMA18_CURR_BWL_COUNT 0xFFC072C4 /* DMA18 Bandwidth Limit Count Current */ +#define DMA18_BWM_COUNT 0xFFC072C8 /* DMA18 Bandwidth Monitor Count */ +#define DMA18_CURR_BWM_COUNT 0xFFC072CC /* DMA18 Bandwidth Monitor Count Current */ + +/* ========================= + DMA19 + ========================= */ +#define DMA19_NEXT_DESC_PTR 0xFFC07300 /* DMA19 Pointer to Next Initial Descriptor */ +#define DMA19_START_ADDR 0xFFC07304 /* DMA19 Start Address of Current Buffer */ +#define DMA19_CONFIG 0xFFC07308 /* DMA19 Configuration Register */ +#define DMA19_X_COUNT 0xFFC0730C /* DMA19 Inner Loop Count Start Value */ +#define DMA19_X_MODIFY 0xFFC07310 /* DMA19 Inner Loop Address Increment */ +#define DMA19_Y_COUNT 0xFFC07314 /* DMA19 Outer Loop Count Start Value (2D only) */ +#define DMA19_Y_MODIFY 0xFFC07318 /* DMA19 Outer Loop Address Increment (2D only) */ +#define DMA19_CURR_DESC_PTR 0xFFC07324 /* DMA19 Current Descriptor Pointer */ +#define DMA19_PREV_DESC_PTR 0xFFC07328 /* DMA19 Previous Initial Descriptor Pointer */ +#define DMA19_CURR_ADDR 0xFFC0732C /* DMA19 Current Address */ +#define DMA19_IRQ_STATUS 0xFFC07330 /* DMA19 Status Register */ +#define DMA19_CURR_X_COUNT 0xFFC07334 /* DMA19 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA19_CURR_Y_COUNT 0xFFC07338 /* DMA19 Current Row Count (2D only) */ +#define DMA19_BWL_COUNT 0xFFC07340 /* DMA19 Bandwidth Limit Count */ +#define DMA19_CURR_BWL_COUNT 0xFFC07344 /* DMA19 Bandwidth Limit Count Current */ +#define DMA19_BWM_COUNT 0xFFC07348 /* DMA19 Bandwidth Monitor Count */ +#define DMA19_CURR_BWM_COUNT 0xFFC0734C /* DMA19 Bandwidth Monitor Count Current */ + +/* ========================= + DMA20 + ========================= */ +#define DMA20_NEXT_DESC_PTR 0xFFC07380 /* DMA20 Pointer to Next Initial Descriptor */ +#define DMA20_START_ADDR 0xFFC07384 /* DMA20 Start Address of Current Buffer */ +#define DMA20_CONFIG 0xFFC07388 /* DMA20 Configuration Register */ +#define DMA20_X_COUNT 0xFFC0738C /* DMA20 Inner Loop Count Start Value */ +#define DMA20_X_MODIFY 0xFFC07390 /* DMA20 Inner Loop Address Increment */ +#define DMA20_Y_COUNT 0xFFC07394 /* DMA20 Outer Loop Count Start Value (2D only) */ +#define DMA20_Y_MODIFY 0xFFC07398 /* DMA20 Outer Loop Address Increment (2D only) */ +#define DMA20_CURR_DESC_PTR 0xFFC073A4 /* DMA20 Current Descriptor Pointer */ +#define DMA20_PREV_DESC_PTR 0xFFC073A8 /* DMA20 Previous Initial Descriptor Pointer */ +#define DMA20_CURR_ADDR 0xFFC073AC /* DMA20 Current Address */ +#define DMA20_IRQ_STATUS 0xFFC073B0 /* DMA20 Status Register */ +#define DMA20_CURR_X_COUNT 0xFFC073B4 /* DMA20 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA20_CURR_Y_COUNT 0xFFC073B8 /* DMA20 Current Row Count (2D only) */ +#define DMA20_BWL_COUNT 0xFFC073C0 /* DMA20 Bandwidth Limit Count */ +#define DMA20_CURR_BWL_COUNT 0xFFC073C4 /* DMA20 Bandwidth Limit Count Current */ +#define DMA20_BWM_COUNT 0xFFC073C8 /* DMA20 Bandwidth Monitor Count */ +#define DMA20_CURR_BWM_COUNT 0xFFC073CC /* DMA20 Bandwidth Monitor Count Current */ + +/* ========================= + DMA21 + ========================= */ +#define DMA21_NEXT_DESC_PTR 0xFFC09000 /* DMA21 Pointer to Next Initial Descriptor */ +#define DMA21_START_ADDR 0xFFC09004 /* DMA21 Start Address of Current Buffer */ +#define DMA21_CONFIG 0xFFC09008 /* DMA21 Configuration Register */ +#define DMA21_X_COUNT 0xFFC0900C /* DMA21 Inner Loop Count Start Value */ +#define DMA21_X_MODIFY 0xFFC09010 /* DMA21 Inner Loop Address Increment */ +#define DMA21_Y_COUNT 0xFFC09014 /* DMA21 Outer Loop Count Start Value (2D only) */ +#define DMA21_Y_MODIFY 0xFFC09018 /* DMA21 Outer Loop Address Increment (2D only) */ +#define DMA21_CURR_DESC_PTR 0xFFC09024 /* DMA21 Current Descriptor Pointer */ +#define DMA21_PREV_DESC_PTR 0xFFC09028 /* DMA21 Previous Initial Descriptor Pointer */ +#define DMA21_CURR_ADDR 0xFFC0902C /* DMA21 Current Address */ +#define DMA21_IRQ_STATUS 0xFFC09030 /* DMA21 Status Register */ +#define DMA21_CURR_X_COUNT 0xFFC09034 /* DMA21 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA21_CURR_Y_COUNT 0xFFC09038 /* DMA21 Current Row Count (2D only) */ +#define DMA21_BWL_COUNT 0xFFC09040 /* DMA21 Bandwidth Limit Count */ +#define DMA21_CURR_BWL_COUNT 0xFFC09044 /* DMA21 Bandwidth Limit Count Current */ +#define DMA21_BWM_COUNT 0xFFC09048 /* DMA21 Bandwidth Monitor Count */ +#define DMA21_CURR_BWM_COUNT 0xFFC0904C /* DMA21 Bandwidth Monitor Count Current */ + +/* ========================= + DMA22 + ========================= */ +#define DMA22_NEXT_DESC_PTR 0xFFC09080 /* DMA22 Pointer to Next Initial Descriptor */ +#define DMA22_START_ADDR 0xFFC09084 /* DMA22 Start Address of Current Buffer */ +#define DMA22_CONFIG 0xFFC09088 /* DMA22 Configuration Register */ +#define DMA22_X_COUNT 0xFFC0908C /* DMA22 Inner Loop Count Start Value */ +#define DMA22_X_MODIFY 0xFFC09090 /* DMA22 Inner Loop Address Increment */ +#define DMA22_Y_COUNT 0xFFC09094 /* DMA22 Outer Loop Count Start Value (2D only) */ +#define DMA22_Y_MODIFY 0xFFC09098 /* DMA22 Outer Loop Address Increment (2D only) */ +#define DMA22_CURR_DESC_PTR 0xFFC090A4 /* DMA22 Current Descriptor Pointer */ +#define DMA22_PREV_DESC_PTR 0xFFC090A8 /* DMA22 Previous Initial Descriptor Pointer */ +#define DMA22_CURR_ADDR 0xFFC090AC /* DMA22 Current Address */ +#define DMA22_IRQ_STATUS 0xFFC090B0 /* DMA22 Status Register */ +#define DMA22_CURR_X_COUNT 0xFFC090B4 /* DMA22 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA22_CURR_Y_COUNT 0xFFC090B8 /* DMA22 Current Row Count (2D only) */ +#define DMA22_BWL_COUNT 0xFFC090C0 /* DMA22 Bandwidth Limit Count */ +#define DMA22_CURR_BWL_COUNT 0xFFC090C4 /* DMA22 Bandwidth Limit Count Current */ +#define DMA22_BWM_COUNT 0xFFC090C8 /* DMA22 Bandwidth Monitor Count */ +#define DMA22_CURR_BWM_COUNT 0xFFC090CC /* DMA22 Bandwidth Monitor Count Current */ + +/* ========================= + DMA23 + ========================= */ +#define DMA23_NEXT_DESC_PTR 0xFFC09100 /* DMA23 Pointer to Next Initial Descriptor */ +#define DMA23_START_ADDR 0xFFC09104 /* DMA23 Start Address of Current Buffer */ +#define DMA23_CONFIG 0xFFC09108 /* DMA23 Configuration Register */ +#define DMA23_X_COUNT 0xFFC0910C /* DMA23 Inner Loop Count Start Value */ +#define DMA23_X_MODIFY 0xFFC09110 /* DMA23 Inner Loop Address Increment */ +#define DMA23_Y_COUNT 0xFFC09114 /* DMA23 Outer Loop Count Start Value (2D only) */ +#define DMA23_Y_MODIFY 0xFFC09118 /* DMA23 Outer Loop Address Increment (2D only) */ +#define DMA23_CURR_DESC_PTR 0xFFC09124 /* DMA23 Current Descriptor Pointer */ +#define DMA23_PREV_DESC_PTR 0xFFC09128 /* DMA23 Previous Initial Descriptor Pointer */ +#define DMA23_CURR_ADDR 0xFFC0912C /* DMA23 Current Address */ +#define DMA23_IRQ_STATUS 0xFFC09130 /* DMA23 Status Register */ +#define DMA23_CURR_X_COUNT 0xFFC09134 /* DMA23 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA23_CURR_Y_COUNT 0xFFC09138 /* DMA23 Current Row Count (2D only) */ +#define DMA23_BWL_COUNT 0xFFC09140 /* DMA23 Bandwidth Limit Count */ +#define DMA23_CURR_BWL_COUNT 0xFFC09144 /* DMA23 Bandwidth Limit Count Current */ +#define DMA23_BWM_COUNT 0xFFC09148 /* DMA23 Bandwidth Monitor Count */ +#define DMA23_CURR_BWM_COUNT 0xFFC0914C /* DMA23 Bandwidth Monitor Count Current */ + +/* ========================= + DMA24 + ========================= */ +#define DMA24_NEXT_DESC_PTR 0xFFC09180 /* DMA24 Pointer to Next Initial Descriptor */ +#define DMA24_START_ADDR 0xFFC09184 /* DMA24 Start Address of Current Buffer */ +#define DMA24_CONFIG 0xFFC09188 /* DMA24 Configuration Register */ +#define DMA24_X_COUNT 0xFFC0918C /* DMA24 Inner Loop Count Start Value */ +#define DMA24_X_MODIFY 0xFFC09190 /* DMA24 Inner Loop Address Increment */ +#define DMA24_Y_COUNT 0xFFC09194 /* DMA24 Outer Loop Count Start Value (2D only) */ +#define DMA24_Y_MODIFY 0xFFC09198 /* DMA24 Outer Loop Address Increment (2D only) */ +#define DMA24_CURR_DESC_PTR 0xFFC091A4 /* DMA24 Current Descriptor Pointer */ +#define DMA24_PREV_DESC_PTR 0xFFC091A8 /* DMA24 Previous Initial Descriptor Pointer */ +#define DMA24_CURR_ADDR 0xFFC091AC /* DMA24 Current Address */ +#define DMA24_IRQ_STATUS 0xFFC091B0 /* DMA24 Status Register */ +#define DMA24_CURR_X_COUNT 0xFFC091B4 /* DMA24 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA24_CURR_Y_COUNT 0xFFC091B8 /* DMA24 Current Row Count (2D only) */ +#define DMA24_BWL_COUNT 0xFFC091C0 /* DMA24 Bandwidth Limit Count */ +#define DMA24_CURR_BWL_COUNT 0xFFC091C4 /* DMA24 Bandwidth Limit Count Current */ +#define DMA24_BWM_COUNT 0xFFC091C8 /* DMA24 Bandwidth Monitor Count */ +#define DMA24_CURR_BWM_COUNT 0xFFC091CC /* DMA24 Bandwidth Monitor Count Current */ + +/* ========================= + DMA25 + ========================= */ +#define DMA25_NEXT_DESC_PTR 0xFFC09200 /* DMA25 Pointer to Next Initial Descriptor */ +#define DMA25_START_ADDR 0xFFC09204 /* DMA25 Start Address of Current Buffer */ +#define DMA25_CONFIG 0xFFC09208 /* DMA25 Configuration Register */ +#define DMA25_X_COUNT 0xFFC0920C /* DMA25 Inner Loop Count Start Value */ +#define DMA25_X_MODIFY 0xFFC09210 /* DMA25 Inner Loop Address Increment */ +#define DMA25_Y_COUNT 0xFFC09214 /* DMA25 Outer Loop Count Start Value (2D only) */ +#define DMA25_Y_MODIFY 0xFFC09218 /* DMA25 Outer Loop Address Increment (2D only) */ +#define DMA25_CURR_DESC_PTR 0xFFC09224 /* DMA25 Current Descriptor Pointer */ +#define DMA25_PREV_DESC_PTR 0xFFC09228 /* DMA25 Previous Initial Descriptor Pointer */ +#define DMA25_CURR_ADDR 0xFFC0922C /* DMA25 Current Address */ +#define DMA25_IRQ_STATUS 0xFFC09230 /* DMA25 Status Register */ +#define DMA25_CURR_X_COUNT 0xFFC09234 /* DMA25 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA25_CURR_Y_COUNT 0xFFC09238 /* DMA25 Current Row Count (2D only) */ +#define DMA25_BWL_COUNT 0xFFC09240 /* DMA25 Bandwidth Limit Count */ +#define DMA25_CURR_BWL_COUNT 0xFFC09244 /* DMA25 Bandwidth Limit Count Current */ +#define DMA25_BWM_COUNT 0xFFC09248 /* DMA25 Bandwidth Monitor Count */ +#define DMA25_CURR_BWM_COUNT 0xFFC0924C /* DMA25 Bandwidth Monitor Count Current */ + +/* ========================= + DMA26 + ========================= */ +#define DMA26_NEXT_DESC_PTR 0xFFC09280 /* DMA26 Pointer to Next Initial Descriptor */ +#define DMA26_START_ADDR 0xFFC09284 /* DMA26 Start Address of Current Buffer */ +#define DMA26_CONFIG 0xFFC09288 /* DMA26 Configuration Register */ +#define DMA26_X_COUNT 0xFFC0928C /* DMA26 Inner Loop Count Start Value */ +#define DMA26_X_MODIFY 0xFFC09290 /* DMA26 Inner Loop Address Increment */ +#define DMA26_Y_COUNT 0xFFC09294 /* DMA26 Outer Loop Count Start Value (2D only) */ +#define DMA26_Y_MODIFY 0xFFC09298 /* DMA26 Outer Loop Address Increment (2D only) */ +#define DMA26_CURR_DESC_PTR 0xFFC092A4 /* DMA26 Current Descriptor Pointer */ +#define DMA26_PREV_DESC_PTR 0xFFC092A8 /* DMA26 Previous Initial Descriptor Pointer */ +#define DMA26_CURR_ADDR 0xFFC092AC /* DMA26 Current Address */ +#define DMA26_IRQ_STATUS 0xFFC092B0 /* DMA26 Status Register */ +#define DMA26_CURR_X_COUNT 0xFFC092B4 /* DMA26 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA26_CURR_Y_COUNT 0xFFC092B8 /* DMA26 Current Row Count (2D only) */ +#define DMA26_BWL_COUNT 0xFFC092C0 /* DMA26 Bandwidth Limit Count */ +#define DMA26_CURR_BWL_COUNT 0xFFC092C4 /* DMA26 Bandwidth Limit Count Current */ +#define DMA26_BWM_COUNT 0xFFC092C8 /* DMA26 Bandwidth Monitor Count */ +#define DMA26_CURR_BWM_COUNT 0xFFC092CC /* DMA26 Bandwidth Monitor Count Current */ + +/* ========================= + DMA27 + ========================= */ +#define DMA27_NEXT_DESC_PTR 0xFFC09300 /* DMA27 Pointer to Next Initial Descriptor */ +#define DMA27_START_ADDR 0xFFC09304 /* DMA27 Start Address of Current Buffer */ +#define DMA27_CONFIG 0xFFC09308 /* DMA27 Configuration Register */ +#define DMA27_X_COUNT 0xFFC0930C /* DMA27 Inner Loop Count Start Value */ +#define DMA27_X_MODIFY 0xFFC09310 /* DMA27 Inner Loop Address Increment */ +#define DMA27_Y_COUNT 0xFFC09314 /* DMA27 Outer Loop Count Start Value (2D only) */ +#define DMA27_Y_MODIFY 0xFFC09318 /* DMA27 Outer Loop Address Increment (2D only) */ +#define DMA27_CURR_DESC_PTR 0xFFC09324 /* DMA27 Current Descriptor Pointer */ +#define DMA27_PREV_DESC_PTR 0xFFC09328 /* DMA27 Previous Initial Descriptor Pointer */ +#define DMA27_CURR_ADDR 0xFFC0932C /* DMA27 Current Address */ +#define DMA27_IRQ_STATUS 0xFFC09330 /* DMA27 Status Register */ +#define DMA27_CURR_X_COUNT 0xFFC09334 /* DMA27 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA27_CURR_Y_COUNT 0xFFC09338 /* DMA27 Current Row Count (2D only) */ +#define DMA27_BWL_COUNT 0xFFC09340 /* DMA27 Bandwidth Limit Count */ +#define DMA27_CURR_BWL_COUNT 0xFFC09344 /* DMA27 Bandwidth Limit Count Current */ +#define DMA27_BWM_COUNT 0xFFC09348 /* DMA27 Bandwidth Monitor Count */ +#define DMA27_CURR_BWM_COUNT 0xFFC0934C /* DMA27 Bandwidth Monitor Count Current */ + +/* ========================= + DMA28 + ========================= */ +#define DMA28_NEXT_DESC_PTR 0xFFC09380 /* DMA28 Pointer to Next Initial Descriptor */ +#define DMA28_START_ADDR 0xFFC09384 /* DMA28 Start Address of Current Buffer */ +#define DMA28_CONFIG 0xFFC09388 /* DMA28 Configuration Register */ +#define DMA28_X_COUNT 0xFFC0938C /* DMA28 Inner Loop Count Start Value */ +#define DMA28_X_MODIFY 0xFFC09390 /* DMA28 Inner Loop Address Increment */ +#define DMA28_Y_COUNT 0xFFC09394 /* DMA28 Outer Loop Count Start Value (2D only) */ +#define DMA28_Y_MODIFY 0xFFC09398 /* DMA28 Outer Loop Address Increment (2D only) */ +#define DMA28_CURR_DESC_PTR 0xFFC093A4 /* DMA28 Current Descriptor Pointer */ +#define DMA28_PREV_DESC_PTR 0xFFC093A8 /* DMA28 Previous Initial Descriptor Pointer */ +#define DMA28_CURR_ADDR 0xFFC093AC /* DMA28 Current Address */ +#define DMA28_IRQ_STATUS 0xFFC093B0 /* DMA28 Status Register */ +#define DMA28_CURR_X_COUNT 0xFFC093B4 /* DMA28 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA28_CURR_Y_COUNT 0xFFC093B8 /* DMA28 Current Row Count (2D only) */ +#define DMA28_BWL_COUNT 0xFFC093C0 /* DMA28 Bandwidth Limit Count */ +#define DMA28_CURR_BWL_COUNT 0xFFC093C4 /* DMA28 Bandwidth Limit Count Current */ +#define DMA28_BWM_COUNT 0xFFC093C8 /* DMA28 Bandwidth Monitor Count */ +#define DMA28_CURR_BWM_COUNT 0xFFC093CC /* DMA28 Bandwidth Monitor Count Current */ + +/* ========================= + DMA29 + ========================= */ +#define DMA29_NEXT_DESC_PTR 0xFFC0B000 /* DMA29 Pointer to Next Initial Descriptor */ +#define DMA29_START_ADDR 0xFFC0B004 /* DMA29 Start Address of Current Buffer */ +#define DMA29_CONFIG 0xFFC0B008 /* DMA29 Configuration Register */ +#define DMA29_X_COUNT 0xFFC0B00C /* DMA29 Inner Loop Count Start Value */ +#define DMA29_X_MODIFY 0xFFC0B010 /* DMA29 Inner Loop Address Increment */ +#define DMA29_Y_COUNT 0xFFC0B014 /* DMA29 Outer Loop Count Start Value (2D only) */ +#define DMA29_Y_MODIFY 0xFFC0B018 /* DMA29 Outer Loop Address Increment (2D only) */ +#define DMA29_CURR_DESC_PTR 0xFFC0B024 /* DMA29 Current Descriptor Pointer */ +#define DMA29_PREV_DESC_PTR 0xFFC0B028 /* DMA29 Previous Initial Descriptor Pointer */ +#define DMA29_CURR_ADDR 0xFFC0B02C /* DMA29 Current Address */ +#define DMA29_IRQ_STATUS 0xFFC0B030 /* DMA29 Status Register */ +#define DMA29_CURR_X_COUNT 0xFFC0B034 /* DMA29 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA29_CURR_Y_COUNT 0xFFC0B038 /* DMA29 Current Row Count (2D only) */ +#define DMA29_BWL_COUNT 0xFFC0B040 /* DMA29 Bandwidth Limit Count */ +#define DMA29_CURR_BWL_COUNT 0xFFC0B044 /* DMA29 Bandwidth Limit Count Current */ +#define DMA29_BWM_COUNT 0xFFC0B048 /* DMA29 Bandwidth Monitor Count */ +#define DMA29_CURR_BWM_COUNT 0xFFC0B04C /* DMA29 Bandwidth Monitor Count Current */ + +/* ========================= + DMA30 + ========================= */ +#define DMA30_NEXT_DESC_PTR 0xFFC0B080 /* DMA30 Pointer to Next Initial Descriptor */ +#define DMA30_START_ADDR 0xFFC0B084 /* DMA30 Start Address of Current Buffer */ +#define DMA30_CONFIG 0xFFC0B088 /* DMA30 Configuration Register */ +#define DMA30_X_COUNT 0xFFC0B08C /* DMA30 Inner Loop Count Start Value */ +#define DMA30_X_MODIFY 0xFFC0B090 /* DMA30 Inner Loop Address Increment */ +#define DMA30_Y_COUNT 0xFFC0B094 /* DMA30 Outer Loop Count Start Value (2D only) */ +#define DMA30_Y_MODIFY 0xFFC0B098 /* DMA30 Outer Loop Address Increment (2D only) */ +#define DMA30_CURR_DESC_PTR 0xFFC0B0A4 /* DMA30 Current Descriptor Pointer */ +#define DMA30_PREV_DESC_PTR 0xFFC0B0A8 /* DMA30 Previous Initial Descriptor Pointer */ +#define DMA30_CURR_ADDR 0xFFC0B0AC /* DMA30 Current Address */ +#define DMA30_IRQ_STATUS 0xFFC0B0B0 /* DMA30 Status Register */ +#define DMA30_CURR_X_COUNT 0xFFC0B0B4 /* DMA30 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA30_CURR_Y_COUNT 0xFFC0B0B8 /* DMA30 Current Row Count (2D only) */ +#define DMA30_BWL_COUNT 0xFFC0B0C0 /* DMA30 Bandwidth Limit Count */ +#define DMA30_CURR_BWL_COUNT 0xFFC0B0C4 /* DMA30 Bandwidth Limit Count Current */ +#define DMA30_BWM_COUNT 0xFFC0B0C8 /* DMA30 Bandwidth Monitor Count */ +#define DMA30_CURR_BWM_COUNT 0xFFC0B0CC /* DMA30 Bandwidth Monitor Count Current */ + +/* ========================= + DMA31 + ========================= */ +#define DMA31_NEXT_DESC_PTR 0xFFC0B100 /* DMA31 Pointer to Next Initial Descriptor */ +#define DMA31_START_ADDR 0xFFC0B104 /* DMA31 Start Address of Current Buffer */ +#define DMA31_CONFIG 0xFFC0B108 /* DMA31 Configuration Register */ +#define DMA31_X_COUNT 0xFFC0B10C /* DMA31 Inner Loop Count Start Value */ +#define DMA31_X_MODIFY 0xFFC0B110 /* DMA31 Inner Loop Address Increment */ +#define DMA31_Y_COUNT 0xFFC0B114 /* DMA31 Outer Loop Count Start Value (2D only) */ +#define DMA31_Y_MODIFY 0xFFC0B118 /* DMA31 Outer Loop Address Increment (2D only) */ +#define DMA31_CURR_DESC_PTR 0xFFC0B124 /* DMA31 Current Descriptor Pointer */ +#define DMA31_PREV_DESC_PTR 0xFFC0B128 /* DMA31 Previous Initial Descriptor Pointer */ +#define DMA31_CURR_ADDR 0xFFC0B12C /* DMA31 Current Address */ +#define DMA31_IRQ_STATUS 0xFFC0B130 /* DMA31 Status Register */ +#define DMA31_CURR_X_COUNT 0xFFC0B134 /* DMA31 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA31_CURR_Y_COUNT 0xFFC0B138 /* DMA31 Current Row Count (2D only) */ +#define DMA31_BWL_COUNT 0xFFC0B140 /* DMA31 Bandwidth Limit Count */ +#define DMA31_CURR_BWL_COUNT 0xFFC0B144 /* DMA31 Bandwidth Limit Count Current */ +#define DMA31_BWM_COUNT 0xFFC0B148 /* DMA31 Bandwidth Monitor Count */ +#define DMA31_CURR_BWM_COUNT 0xFFC0B14C /* DMA31 Bandwidth Monitor Count Current */ + +/* ========================= + DMA32 + ========================= */ +#define DMA32_NEXT_DESC_PTR 0xFFC0B180 /* DMA32 Pointer to Next Initial Descriptor */ +#define DMA32_START_ADDR 0xFFC0B184 /* DMA32 Start Address of Current Buffer */ +#define DMA32_CONFIG 0xFFC0B188 /* DMA32 Configuration Register */ +#define DMA32_X_COUNT 0xFFC0B18C /* DMA32 Inner Loop Count Start Value */ +#define DMA32_X_MODIFY 0xFFC0B190 /* DMA32 Inner Loop Address Increment */ +#define DMA32_Y_COUNT 0xFFC0B194 /* DMA32 Outer Loop Count Start Value (2D only) */ +#define DMA32_Y_MODIFY 0xFFC0B198 /* DMA32 Outer Loop Address Increment (2D only) */ +#define DMA32_CURR_DESC_PTR 0xFFC0B1A4 /* DMA32 Current Descriptor Pointer */ +#define DMA32_PREV_DESC_PTR 0xFFC0B1A8 /* DMA32 Previous Initial Descriptor Pointer */ +#define DMA32_CURR_ADDR 0xFFC0B1AC /* DMA32 Current Address */ +#define DMA32_IRQ_STATUS 0xFFC0B1B0 /* DMA32 Status Register */ +#define DMA32_CURR_X_COUNT 0xFFC0B1B4 /* DMA32 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA32_CURR_Y_COUNT 0xFFC0B1B8 /* DMA32 Current Row Count (2D only) */ +#define DMA32_BWL_COUNT 0xFFC0B1C0 /* DMA32 Bandwidth Limit Count */ +#define DMA32_CURR_BWL_COUNT 0xFFC0B1C4 /* DMA32 Bandwidth Limit Count Current */ +#define DMA32_BWM_COUNT 0xFFC0B1C8 /* DMA32 Bandwidth Monitor Count */ +#define DMA32_CURR_BWM_COUNT 0xFFC0B1CC /* DMA32 Bandwidth Monitor Count Current */ + +/* ========================= + DMA33 + ========================= */ +#define DMA33_NEXT_DESC_PTR 0xFFC0D000 /* DMA33 Pointer to Next Initial Descriptor */ +#define DMA33_START_ADDR 0xFFC0D004 /* DMA33 Start Address of Current Buffer */ +#define DMA33_CONFIG 0xFFC0D008 /* DMA33 Configuration Register */ +#define DMA33_X_COUNT 0xFFC0D00C /* DMA33 Inner Loop Count Start Value */ +#define DMA33_X_MODIFY 0xFFC0D010 /* DMA33 Inner Loop Address Increment */ +#define DMA33_Y_COUNT 0xFFC0D014 /* DMA33 Outer Loop Count Start Value (2D only) */ +#define DMA33_Y_MODIFY 0xFFC0D018 /* DMA33 Outer Loop Address Increment (2D only) */ +#define DMA33_CURR_DESC_PTR 0xFFC0D024 /* DMA33 Current Descriptor Pointer */ +#define DMA33_PREV_DESC_PTR 0xFFC0D028 /* DMA33 Previous Initial Descriptor Pointer */ +#define DMA33_CURR_ADDR 0xFFC0D02C /* DMA33 Current Address */ +#define DMA33_IRQ_STATUS 0xFFC0D030 /* DMA33 Status Register */ +#define DMA33_CURR_X_COUNT 0xFFC0D034 /* DMA33 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA33_CURR_Y_COUNT 0xFFC0D038 /* DMA33 Current Row Count (2D only) */ +#define DMA33_BWL_COUNT 0xFFC0D040 /* DMA33 Bandwidth Limit Count */ +#define DMA33_CURR_BWL_COUNT 0xFFC0D044 /* DMA33 Bandwidth Limit Count Current */ +#define DMA33_BWM_COUNT 0xFFC0D048 /* DMA33 Bandwidth Monitor Count */ +#define DMA33_CURR_BWM_COUNT 0xFFC0D04C /* DMA33 Bandwidth Monitor Count Current */ + +/* ========================= + DMA34 + ========================= */ +#define DMA34_NEXT_DESC_PTR 0xFFC0D080 /* DMA34 Pointer to Next Initial Descriptor */ +#define DMA34_START_ADDR 0xFFC0D084 /* DMA34 Start Address of Current Buffer */ +#define DMA34_CONFIG 0xFFC0D088 /* DMA34 Configuration Register */ +#define DMA34_X_COUNT 0xFFC0D08C /* DMA34 Inner Loop Count Start Value */ +#define DMA34_X_MODIFY 0xFFC0D090 /* DMA34 Inner Loop Address Increment */ +#define DMA34_Y_COUNT 0xFFC0D094 /* DMA34 Outer Loop Count Start Value (2D only) */ +#define DMA34_Y_MODIFY 0xFFC0D098 /* DMA34 Outer Loop Address Increment (2D only) */ +#define DMA34_CURR_DESC_PTR 0xFFC0D0A4 /* DMA34 Current Descriptor Pointer */ +#define DMA34_PREV_DESC_PTR 0xFFC0D0A8 /* DMA34 Previous Initial Descriptor Pointer */ +#define DMA34_CURR_ADDR 0xFFC0D0AC /* DMA34 Current Address */ +#define DMA34_IRQ_STATUS 0xFFC0D0B0 /* DMA34 Status Register */ +#define DMA34_CURR_X_COUNT 0xFFC0D0B4 /* DMA34 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA34_CURR_Y_COUNT 0xFFC0D0B8 /* DMA34 Current Row Count (2D only) */ +#define DMA34_BWL_COUNT 0xFFC0D0C0 /* DMA34 Bandwidth Limit Count */ +#define DMA34_CURR_BWL_COUNT 0xFFC0D0C4 /* DMA34 Bandwidth Limit Count Current */ +#define DMA34_BWM_COUNT 0xFFC0D0C8 /* DMA34 Bandwidth Monitor Count */ +#define DMA34_CURR_BWM_COUNT 0xFFC0D0CC /* DMA34 Bandwidth Monitor Count Current */ + +/* ========================= + DMA35 + ========================= */ +#define DMA35_NEXT_DESC_PTR 0xFFC10000 /* DMA35 Pointer to Next Initial Descriptor */ +#define DMA35_START_ADDR 0xFFC10004 /* DMA35 Start Address of Current Buffer */ +#define DMA35_CONFIG 0xFFC10008 /* DMA35 Configuration Register */ +#define DMA35_X_COUNT 0xFFC1000C /* DMA35 Inner Loop Count Start Value */ +#define DMA35_X_MODIFY 0xFFC10010 /* DMA35 Inner Loop Address Increment */ +#define DMA35_Y_COUNT 0xFFC10014 /* DMA35 Outer Loop Count Start Value (2D only) */ +#define DMA35_Y_MODIFY 0xFFC10018 /* DMA35 Outer Loop Address Increment (2D only) */ +#define DMA35_CURR_DESC_PTR 0xFFC10024 /* DMA35 Current Descriptor Pointer */ +#define DMA35_PREV_DESC_PTR 0xFFC10028 /* DMA35 Previous Initial Descriptor Pointer */ +#define DMA35_CURR_ADDR 0xFFC1002C /* DMA35 Current Address */ +#define DMA35_IRQ_STATUS 0xFFC10030 /* DMA35 Status Register */ +#define DMA35_CURR_X_COUNT 0xFFC10034 /* DMA35 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA35_CURR_Y_COUNT 0xFFC10038 /* DMA35 Current Row Count (2D only) */ +#define DMA35_BWL_COUNT 0xFFC10040 /* DMA35 Bandwidth Limit Count */ +#define DMA35_CURR_BWL_COUNT 0xFFC10044 /* DMA35 Bandwidth Limit Count Current */ +#define DMA35_BWM_COUNT 0xFFC10048 /* DMA35 Bandwidth Monitor Count */ +#define DMA35_CURR_BWM_COUNT 0xFFC1004C /* DMA35 Bandwidth Monitor Count Current */ + +/* ========================= + DMA36 + ========================= */ +#define DMA36_NEXT_DESC_PTR 0xFFC10080 /* DMA36 Pointer to Next Initial Descriptor */ +#define DMA36_START_ADDR 0xFFC10084 /* DMA36 Start Address of Current Buffer */ +#define DMA36_CONFIG 0xFFC10088 /* DMA36 Configuration Register */ +#define DMA36_X_COUNT 0xFFC1008C /* DMA36 Inner Loop Count Start Value */ +#define DMA36_X_MODIFY 0xFFC10090 /* DMA36 Inner Loop Address Increment */ +#define DMA36_Y_COUNT 0xFFC10094 /* DMA36 Outer Loop Count Start Value (2D only) */ +#define DMA36_Y_MODIFY 0xFFC10098 /* DMA36 Outer Loop Address Increment (2D only) */ +#define DMA36_CURR_DESC_PTR 0xFFC100A4 /* DMA36 Current Descriptor Pointer */ +#define DMA36_PREV_DESC_PTR 0xFFC100A8 /* DMA36 Previous Initial Descriptor Pointer */ +#define DMA36_CURR_ADDR 0xFFC100AC /* DMA36 Current Address */ +#define DMA36_IRQ_STATUS 0xFFC100B0 /* DMA36 Status Register */ +#define DMA36_CURR_X_COUNT 0xFFC100B4 /* DMA36 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA36_CURR_Y_COUNT 0xFFC100B8 /* DMA36 Current Row Count (2D only) */ +#define DMA36_BWL_COUNT 0xFFC100C0 /* DMA36 Bandwidth Limit Count */ +#define DMA36_CURR_BWL_COUNT 0xFFC100C4 /* DMA36 Bandwidth Limit Count Current */ +#define DMA36_BWM_COUNT 0xFFC100C8 /* DMA36 Bandwidth Monitor Count */ +#define DMA36_CURR_BWM_COUNT 0xFFC100CC /* DMA36 Bandwidth Monitor Count Current */ + +/* ========================= + DMA37 + ========================= */ +#define DMA37_NEXT_DESC_PTR 0xFFC10100 /* DMA37 Pointer to Next Initial Descriptor */ +#define DMA37_START_ADDR 0xFFC10104 /* DMA37 Start Address of Current Buffer */ +#define DMA37_CONFIG 0xFFC10108 /* DMA37 Configuration Register */ +#define DMA37_X_COUNT 0xFFC1010C /* DMA37 Inner Loop Count Start Value */ +#define DMA37_X_MODIFY 0xFFC10110 /* DMA37 Inner Loop Address Increment */ +#define DMA37_Y_COUNT 0xFFC10114 /* DMA37 Outer Loop Count Start Value (2D only) */ +#define DMA37_Y_MODIFY 0xFFC10118 /* DMA37 Outer Loop Address Increment (2D only) */ +#define DMA37_CURR_DESC_PTR 0xFFC10124 /* DMA37 Current Descriptor Pointer */ +#define DMA37_PREV_DESC_PTR 0xFFC10128 /* DMA37 Previous Initial Descriptor Pointer */ +#define DMA37_CURR_ADDR 0xFFC1012C /* DMA37 Current Address */ +#define DMA37_IRQ_STATUS 0xFFC10130 /* DMA37 Status Register */ +#define DMA37_CURR_X_COUNT 0xFFC10134 /* DMA37 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA37_CURR_Y_COUNT 0xFFC10138 /* DMA37 Current Row Count (2D only) */ +#define DMA37_BWL_COUNT 0xFFC10140 /* DMA37 Bandwidth Limit Count */ +#define DMA37_CURR_BWL_COUNT 0xFFC10144 /* DMA37 Bandwidth Limit Count Current */ +#define DMA37_BWM_COUNT 0xFFC10148 /* DMA37 Bandwidth Monitor Count */ +#define DMA37_CURR_BWM_COUNT 0xFFC1014C /* DMA37 Bandwidth Monitor Count Current */ + +/* ========================= + DMA38 + ========================= */ +#define DMA38_NEXT_DESC_PTR 0xFFC12000 /* DMA38 Pointer to Next Initial Descriptor */ +#define DMA38_START_ADDR 0xFFC12004 /* DMA38 Start Address of Current Buffer */ +#define DMA38_CONFIG 0xFFC12008 /* DMA38 Configuration Register */ +#define DMA38_X_COUNT 0xFFC1200C /* DMA38 Inner Loop Count Start Value */ +#define DMA38_X_MODIFY 0xFFC12010 /* DMA38 Inner Loop Address Increment */ +#define DMA38_Y_COUNT 0xFFC12014 /* DMA38 Outer Loop Count Start Value (2D only) */ +#define DMA38_Y_MODIFY 0xFFC12018 /* DMA38 Outer Loop Address Increment (2D only) */ +#define DMA38_CURR_DESC_PTR 0xFFC12024 /* DMA38 Current Descriptor Pointer */ +#define DMA38_PREV_DESC_PTR 0xFFC12028 /* DMA38 Previous Initial Descriptor Pointer */ +#define DMA38_CURR_ADDR 0xFFC1202C /* DMA38 Current Address */ +#define DMA38_IRQ_STATUS 0xFFC12030 /* DMA38 Status Register */ +#define DMA38_CURR_X_COUNT 0xFFC12034 /* DMA38 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA38_CURR_Y_COUNT 0xFFC12038 /* DMA38 Current Row Count (2D only) */ +#define DMA38_BWL_COUNT 0xFFC12040 /* DMA38 Bandwidth Limit Count */ +#define DMA38_CURR_BWL_COUNT 0xFFC12044 /* DMA38 Bandwidth Limit Count Current */ +#define DMA38_BWM_COUNT 0xFFC12048 /* DMA38 Bandwidth Monitor Count */ +#define DMA38_CURR_BWM_COUNT 0xFFC1204C /* DMA38 Bandwidth Monitor Count Current */ + +/* ========================= + DMA39 + ========================= */ +#define DMA39_NEXT_DESC_PTR 0xFFC12080 /* DMA39 Pointer to Next Initial Descriptor */ +#define DMA39_START_ADDR 0xFFC12084 /* DMA39 Start Address of Current Buffer */ +#define DMA39_CONFIG 0xFFC12088 /* DMA39 Configuration Register */ +#define DMA39_X_COUNT 0xFFC1208C /* DMA39 Inner Loop Count Start Value */ +#define DMA39_X_MODIFY 0xFFC12090 /* DMA39 Inner Loop Address Increment */ +#define DMA39_Y_COUNT 0xFFC12094 /* DMA39 Outer Loop Count Start Value (2D only) */ +#define DMA39_Y_MODIFY 0xFFC12098 /* DMA39 Outer Loop Address Increment (2D only) */ +#define DMA39_CURR_DESC_PTR 0xFFC120A4 /* DMA39 Current Descriptor Pointer */ +#define DMA39_PREV_DESC_PTR 0xFFC120A8 /* DMA39 Previous Initial Descriptor Pointer */ +#define DMA39_CURR_ADDR 0xFFC120AC /* DMA39 Current Address */ +#define DMA39_IRQ_STATUS 0xFFC120B0 /* DMA39 Status Register */ +#define DMA39_CURR_X_COUNT 0xFFC120B4 /* DMA39 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA39_CURR_Y_COUNT 0xFFC120B8 /* DMA39 Current Row Count (2D only) */ +#define DMA39_BWL_COUNT 0xFFC120C0 /* DMA39 Bandwidth Limit Count */ +#define DMA39_CURR_BWL_COUNT 0xFFC120C4 /* DMA39 Bandwidth Limit Count Current */ +#define DMA39_BWM_COUNT 0xFFC120C8 /* DMA39 Bandwidth Monitor Count */ +#define DMA39_CURR_BWM_COUNT 0xFFC120CC /* DMA39 Bandwidth Monitor Count Current */ + +/* ========================= + DMA40 + ========================= */ +#define DMA40_NEXT_DESC_PTR 0xFFC12100 /* DMA40 Pointer to Next Initial Descriptor */ +#define DMA40_START_ADDR 0xFFC12104 /* DMA40 Start Address of Current Buffer */ +#define DMA40_CONFIG 0xFFC12108 /* DMA40 Configuration Register */ +#define DMA40_X_COUNT 0xFFC1210C /* DMA40 Inner Loop Count Start Value */ +#define DMA40_X_MODIFY 0xFFC12110 /* DMA40 Inner Loop Address Increment */ +#define DMA40_Y_COUNT 0xFFC12114 /* DMA40 Outer Loop Count Start Value (2D only) */ +#define DMA40_Y_MODIFY 0xFFC12118 /* DMA40 Outer Loop Address Increment (2D only) */ +#define DMA40_CURR_DESC_PTR 0xFFC12124 /* DMA40 Current Descriptor Pointer */ +#define DMA40_PREV_DESC_PTR 0xFFC12128 /* DMA40 Previous Initial Descriptor Pointer */ +#define DMA40_CURR_ADDR 0xFFC1212C /* DMA40 Current Address */ +#define DMA40_IRQ_STATUS 0xFFC12130 /* DMA40 Status Register */ +#define DMA40_CURR_X_COUNT 0xFFC12134 /* DMA40 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA40_CURR_Y_COUNT 0xFFC12138 /* DMA40 Current Row Count (2D only) */ +#define DMA40_BWL_COUNT 0xFFC12140 /* DMA40 Bandwidth Limit Count */ +#define DMA40_CURR_BWL_COUNT 0xFFC12144 /* DMA40 Bandwidth Limit Count Current */ +#define DMA40_BWM_COUNT 0xFFC12148 /* DMA40 Bandwidth Monitor Count */ +#define DMA40_CURR_BWM_COUNT 0xFFC1214C /* DMA40 Bandwidth Monitor Count Current */ + +/* ========================= + DMA41 + ========================= */ +#define DMA41_NEXT_DESC_PTR 0xFFC12180 /* DMA41 Pointer to Next Initial Descriptor */ +#define DMA41_START_ADDR 0xFFC12184 /* DMA41 Start Address of Current Buffer */ +#define DMA41_CONFIG 0xFFC12188 /* DMA41 Configuration Register */ +#define DMA41_X_COUNT 0xFFC1218C /* DMA41 Inner Loop Count Start Value */ +#define DMA41_X_MODIFY 0xFFC12190 /* DMA41 Inner Loop Address Increment */ +#define DMA41_Y_COUNT 0xFFC12194 /* DMA41 Outer Loop Count Start Value (2D only) */ +#define DMA41_Y_MODIFY 0xFFC12198 /* DMA41 Outer Loop Address Increment (2D only) */ +#define DMA41_CURR_DESC_PTR 0xFFC121A4 /* DMA41 Current Descriptor Pointer */ +#define DMA41_PREV_DESC_PTR 0xFFC121A8 /* DMA41 Previous Initial Descriptor Pointer */ +#define DMA41_CURR_ADDR 0xFFC121AC /* DMA41 Current Address */ +#define DMA41_IRQ_STATUS 0xFFC121B0 /* DMA41 Status Register */ +#define DMA41_CURR_X_COUNT 0xFFC121B4 /* DMA41 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA41_CURR_Y_COUNT 0xFFC121B8 /* DMA41 Current Row Count (2D only) */ +#define DMA41_BWL_COUNT 0xFFC121C0 /* DMA41 Bandwidth Limit Count */ +#define DMA41_CURR_BWL_COUNT 0xFFC121C4 /* DMA41 Bandwidth Limit Count Current */ +#define DMA41_BWM_COUNT 0xFFC121C8 /* DMA41 Bandwidth Monitor Count */ +#define DMA41_CURR_BWM_COUNT 0xFFC121CC /* DMA41 Bandwidth Monitor Count Current */ + +/* ========================= + DMA42 + ========================= */ +#define DMA42_NEXT_DESC_PTR 0xFFC14000 /* DMA42 Pointer to Next Initial Descriptor */ +#define DMA42_START_ADDR 0xFFC14004 /* DMA42 Start Address of Current Buffer */ +#define DMA42_CONFIG 0xFFC14008 /* DMA42 Configuration Register */ +#define DMA42_X_COUNT 0xFFC1400C /* DMA42 Inner Loop Count Start Value */ +#define DMA42_X_MODIFY 0xFFC14010 /* DMA42 Inner Loop Address Increment */ +#define DMA42_Y_COUNT 0xFFC14014 /* DMA42 Outer Loop Count Start Value (2D only) */ +#define DMA42_Y_MODIFY 0xFFC14018 /* DMA42 Outer Loop Address Increment (2D only) */ +#define DMA42_CURR_DESC_PTR 0xFFC14024 /* DMA42 Current Descriptor Pointer */ +#define DMA42_PREV_DESC_PTR 0xFFC14028 /* DMA42 Previous Initial Descriptor Pointer */ +#define DMA42_CURR_ADDR 0xFFC1402C /* DMA42 Current Address */ +#define DMA42_IRQ_STATUS 0xFFC14030 /* DMA42 Status Register */ +#define DMA42_CURR_X_COUNT 0xFFC14034 /* DMA42 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA42_CURR_Y_COUNT 0xFFC14038 /* DMA42 Current Row Count (2D only) */ +#define DMA42_BWL_COUNT 0xFFC14040 /* DMA42 Bandwidth Limit Count */ +#define DMA42_CURR_BWL_COUNT 0xFFC14044 /* DMA42 Bandwidth Limit Count Current */ +#define DMA42_BWM_COUNT 0xFFC14048 /* DMA42 Bandwidth Monitor Count */ +#define DMA42_CURR_BWM_COUNT 0xFFC1404C /* DMA42 Bandwidth Monitor Count Current */ + +/* ========================= + DMA43 + ========================= */ +#define DMA43_NEXT_DESC_PTR 0xFFC14080 /* DMA43 Pointer to Next Initial Descriptor */ +#define DMA43_START_ADDR 0xFFC14084 /* DMA43 Start Address of Current Buffer */ +#define DMA43_CONFIG 0xFFC14088 /* DMA43 Configuration Register */ +#define DMA43_X_COUNT 0xFFC1408C /* DMA43 Inner Loop Count Start Value */ +#define DMA43_X_MODIFY 0xFFC14090 /* DMA43 Inner Loop Address Increment */ +#define DMA43_Y_COUNT 0xFFC14094 /* DMA43 Outer Loop Count Start Value (2D only) */ +#define DMA43_Y_MODIFY 0xFFC14098 /* DMA43 Outer Loop Address Increment (2D only) */ +#define DMA43_CURR_DESC_PTR 0xFFC140A4 /* DMA43 Current Descriptor Pointer */ +#define DMA43_PREV_DESC_PTR 0xFFC140A8 /* DMA43 Previous Initial Descriptor Pointer */ +#define DMA43_CURR_ADDR 0xFFC140AC /* DMA43 Current Address */ +#define DMA43_IRQ_STATUS 0xFFC140B0 /* DMA43 Status Register */ +#define DMA43_CURR_X_COUNT 0xFFC140B4 /* DMA43 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA43_CURR_Y_COUNT 0xFFC140B8 /* DMA43 Current Row Count (2D only) */ +#define DMA43_BWL_COUNT 0xFFC140C0 /* DMA43 Bandwidth Limit Count */ +#define DMA43_CURR_BWL_COUNT 0xFFC140C4 /* DMA43 Bandwidth Limit Count Current */ +#define DMA43_BWM_COUNT 0xFFC140C8 /* DMA43 Bandwidth Monitor Count */ +#define DMA43_CURR_BWM_COUNT 0xFFC140CC /* DMA43 Bandwidth Monitor Count Current */ + +/* ========================= + DMA44 + ========================= */ +#define DMA44_NEXT_DESC_PTR 0xFFC14100 /* DMA44 Pointer to Next Initial Descriptor */ +#define DMA44_START_ADDR 0xFFC14104 /* DMA44 Start Address of Current Buffer */ +#define DMA44_CONFIG 0xFFC14108 /* DMA44 Configuration Register */ +#define DMA44_X_COUNT 0xFFC1410C /* DMA44 Inner Loop Count Start Value */ +#define DMA44_X_MODIFY 0xFFC14110 /* DMA44 Inner Loop Address Increment */ +#define DMA44_Y_COUNT 0xFFC14114 /* DMA44 Outer Loop Count Start Value (2D only) */ +#define DMA44_Y_MODIFY 0xFFC14118 /* DMA44 Outer Loop Address Increment (2D only) */ +#define DMA44_CURR_DESC_PTR 0xFFC14124 /* DMA44 Current Descriptor Pointer */ +#define DMA44_PREV_DESC_PTR 0xFFC14128 /* DMA44 Previous Initial Descriptor Pointer */ +#define DMA44_CURR_ADDR 0xFFC1412C /* DMA44 Current Address */ +#define DMA44_IRQ_STATUS 0xFFC14130 /* DMA44 Status Register */ +#define DMA44_CURR_X_COUNT 0xFFC14134 /* DMA44 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA44_CURR_Y_COUNT 0xFFC14138 /* DMA44 Current Row Count (2D only) */ +#define DMA44_BWL_COUNT 0xFFC14140 /* DMA44 Bandwidth Limit Count */ +#define DMA44_CURR_BWL_COUNT 0xFFC14144 /* DMA44 Bandwidth Limit Count Current */ +#define DMA44_BWM_COUNT 0xFFC14148 /* DMA44 Bandwidth Monitor Count */ +#define DMA44_CURR_BWM_COUNT 0xFFC1414C /* DMA44 Bandwidth Monitor Count Current */ + +/* ========================= + DMA45 + ========================= */ +#define DMA45_NEXT_DESC_PTR 0xFFC14180 /* DMA45 Pointer to Next Initial Descriptor */ +#define DMA45_START_ADDR 0xFFC14184 /* DMA45 Start Address of Current Buffer */ +#define DMA45_CONFIG 0xFFC14188 /* DMA45 Configuration Register */ +#define DMA45_X_COUNT 0xFFC1418C /* DMA45 Inner Loop Count Start Value */ +#define DMA45_X_MODIFY 0xFFC14190 /* DMA45 Inner Loop Address Increment */ +#define DMA45_Y_COUNT 0xFFC14194 /* DMA45 Outer Loop Count Start Value (2D only) */ +#define DMA45_Y_MODIFY 0xFFC14198 /* DMA45 Outer Loop Address Increment (2D only) */ +#define DMA45_CURR_DESC_PTR 0xFFC141A4 /* DMA45 Current Descriptor Pointer */ +#define DMA45_PREV_DESC_PTR 0xFFC141A8 /* DMA45 Previous Initial Descriptor Pointer */ +#define DMA45_CURR_ADDR 0xFFC141AC /* DMA45 Current Address */ +#define DMA45_IRQ_STATUS 0xFFC141B0 /* DMA45 Status Register */ +#define DMA45_CURR_X_COUNT 0xFFC141B4 /* DMA45 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA45_CURR_Y_COUNT 0xFFC141B8 /* DMA45 Current Row Count (2D only) */ +#define DMA45_BWL_COUNT 0xFFC141C0 /* DMA45 Bandwidth Limit Count */ +#define DMA45_CURR_BWL_COUNT 0xFFC141C4 /* DMA45 Bandwidth Limit Count Current */ +#define DMA45_BWM_COUNT 0xFFC141C8 /* DMA45 Bandwidth Monitor Count */ +#define DMA45_CURR_BWM_COUNT 0xFFC141CC /* DMA45 Bandwidth Monitor Count Current */ + +/* ========================= + DMA46 + ========================= */ +#define DMA46_NEXT_DESC_PTR 0xFFC14200 /* DMA46 Pointer to Next Initial Descriptor */ +#define DMA46_START_ADDR 0xFFC14204 /* DMA46 Start Address of Current Buffer */ +#define DMA46_CONFIG 0xFFC14208 /* DMA46 Configuration Register */ +#define DMA46_X_COUNT 0xFFC1420C /* DMA46 Inner Loop Count Start Value */ +#define DMA46_X_MODIFY 0xFFC14210 /* DMA46 Inner Loop Address Increment */ +#define DMA46_Y_COUNT 0xFFC14214 /* DMA46 Outer Loop Count Start Value (2D only) */ +#define DMA46_Y_MODIFY 0xFFC14218 /* DMA46 Outer Loop Address Increment (2D only) */ +#define DMA46_CURR_DESC_PTR 0xFFC14224 /* DMA46 Current Descriptor Pointer */ +#define DMA46_PREV_DESC_PTR 0xFFC14228 /* DMA46 Previous Initial Descriptor Pointer */ +#define DMA46_CURR_ADDR 0xFFC1422C /* DMA46 Current Address */ +#define DMA46_IRQ_STATUS 0xFFC14230 /* DMA46 Status Register */ +#define DMA46_CURR_X_COUNT 0xFFC14234 /* DMA46 Current Count(1D) or intra-row XCNT (2D) */ +#define DMA46_CURR_Y_COUNT 0xFFC14238 /* DMA46 Current Row Count (2D only) */ +#define DMA46_BWL_COUNT 0xFFC14240 /* DMA46 Bandwidth Limit Count */ +#define DMA46_CURR_BWL_COUNT 0xFFC14244 /* DMA46 Bandwidth Limit Count Current */ +#define DMA46_BWM_COUNT 0xFFC14248 /* DMA46 Bandwidth Monitor Count */ +#define DMA46_CURR_BWM_COUNT 0xFFC1424C /* DMA46 Bandwidth Monitor Count Current */ + + +/******************************************************************************** + DMA Alias Definitions + ********************************************************************************/ +#define MDMA0_DEST_CRC0_NEXT_DESC_PTR (DMA22_NEXT_DESC_PTR) +#define MDMA0_DEST_CRC0_START_ADDR (DMA22_START_ADDR) +#define MDMA0_DEST_CRC0_CONFIG (DMA22_CONFIG) +#define MDMA0_DEST_CRC0_X_COUNT (DMA22_X_COUNT) +#define MDMA0_DEST_CRC0_X_MODIFY (DMA22_X_MODIFY) +#define MDMA0_DEST_CRC0_Y_COUNT (DMA22_Y_COUNT) +#define MDMA0_DEST_CRC0_Y_MODIFY (DMA22_Y_MODIFY) +#define MDMA0_DEST_CRC0_CURR_DESC_PTR (DMA22_CURR_DESC_PTR) +#define MDMA0_DEST_CRC0_PREV_DESC_PTR (DMA22_PREV_DESC_PTR) +#define MDMA0_DEST_CRC0_CURR_ADDR (DMA22_CURR_ADDR) +#define MDMA0_DEST_CRC0_IRQ_STATUS (DMA22_IRQ_STATUS) +#define MDMA0_DEST_CRC0_CURR_X_COUNT (DMA22_CURR_X_COUNT) +#define MDMA0_DEST_CRC0_CURR_Y_COUNT (DMA22_CURR_Y_COUNT) +#define MDMA0_DEST_CRC0_BWL_COUNT (DMA22_BWL_COUNT) +#define MDMA0_DEST_CRC0_CURR_BWL_COUNT (DMA22_CURR_BWL_COUNT) +#define MDMA0_DEST_CRC0_BWM_COUNT (DMA22_BWM_COUNT) +#define MDMA0_DEST_CRC0_CURR_BWM_COUNT (DMA22_CURR_BWM_COUNT) +#define MDMA0_SRC_CRC0_NEXT_DESC_PTR (DMA21_NEXT_DESC_PTR) +#define MDMA0_SRC_CRC0_START_ADDR (DMA21_START_ADDR) +#define MDMA0_SRC_CRC0_CONFIG (DMA21_CONFIG) +#define MDMA0_SRC_CRC0_X_COUNT (DMA21_X_COUNT) +#define MDMA0_SRC_CRC0_X_MODIFY (DMA21_X_MODIFY) +#define MDMA0_SRC_CRC0_Y_COUNT (DMA21_Y_COUNT) +#define MDMA0_SRC_CRC0_Y_MODIFY (DMA21_Y_MODIFY) +#define MDMA0_SRC_CRC0_CURR_DESC_PTR (DMA21_CURR_DESC_PTR) +#define MDMA0_SRC_CRC0_PREV_DESC_PTR (DMA21_PREV_DESC_PTR) +#define MDMA0_SRC_CRC0_CURR_ADDR (DMA21_CURR_ADDR) +#define MDMA0_SRC_CRC0_IRQ_STATUS (DMA21_IRQ_STATUS) +#define MDMA0_SRC_CRC0_CURR_X_COUNT (DMA21_CURR_X_COUNT) +#define MDMA0_SRC_CRC0_CURR_Y_COUNT (DMA21_CURR_Y_COUNT) +#define MDMA0_SRC_CRC0_BWL_COUNT (DMA21_BWL_COUNT) +#define MDMA0_SRC_CRC0_CURR_BWL_COUNT (DMA21_CURR_BWL_COUNT) +#define MDMA0_SRC_CRC0_BWM_COUNT (DMA21_BWM_COUNT) +#define MDMA0_SRC_CRC0_CURR_BWM_COUNT (DMA21_CURR_BWM_COUNT) +#define MDMA1_DEST_CRC1_NEXT_DESC_PTR (DMA24_NEXT_DESC_PTR) +#define MDMA1_DEST_CRC1_START_ADDR (DMA24_START_ADDR) +#define MDMA1_DEST_CRC1_CONFIG (DMA24_CONFIG) +#define MDMA1_DEST_CRC1_X_COUNT (DMA24_X_COUNT) +#define MDMA1_DEST_CRC1_X_MODIFY (DMA24_X_MODIFY) +#define MDMA1_DEST_CRC1_Y_COUNT (DMA24_Y_COUNT) +#define MDMA1_DEST_CRC1_Y_MODIFY (DMA24_Y_MODIFY) +#define MDMA1_DEST_CRC1_CURR_DESC_PTR (DMA24_CURR_DESC_PTR) +#define MDMA1_DEST_CRC1_PREV_DESC_PTR (DMA24_PREV_DESC_PTR) +#define MDMA1_DEST_CRC1_CURR_ADDR (DMA24_CURR_ADDR) +#define MDMA1_DEST_CRC1_IRQ_STATUS (DMA24_IRQ_STATUS) +#define MDMA1_DEST_CRC1_CURR_X_COUNT (DMA24_CURR_X_COUNT) +#define MDMA1_DEST_CRC1_CURR_Y_COUNT (DMA24_CURR_Y_COUNT) +#define MDMA1_DEST_CRC1_BWL_COUNT (DMA24_BWL_COUNT) +#define MDMA1_DEST_CRC1_CURR_BWL_COUNT (DMA24_CURR_BWL_COUNT) +#define MDMA1_DEST_CRC1_BWM_COUNT (DMA24_BWM_COUNT) +#define MDMA1_DEST_CRC1_CURR_BWM_COUNT (DMA24_CURR_BWM_COUNT) +#define MDMA1_SRC_CRC1_NEXT_DESC_PTR (DMA23_NEXT_DESC_PTR) +#define MDMA1_SRC_CRC1_START_ADDR (DMA23_START_ADDR) +#define MDMA1_SRC_CRC1_CONFIG (DMA23_CONFIG) +#define MDMA1_SRC_CRC1_X_COUNT (DMA23_X_COUNT) +#define MDMA1_SRC_CRC1_X_MODIFY (DMA23_X_MODIFY) +#define MDMA1_SRC_CRC1_Y_COUNT (DMA23_Y_COUNT) +#define MDMA1_SRC_CRC1_Y_MODIFY (DMA23_Y_MODIFY) +#define MDMA1_SRC_CRC1_CURR_DESC_PTR (DMA23_CURR_DESC_PTR) +#define MDMA1_SRC_CRC1_PREV_DESC_PTR (DMA23_PREV_DESC_PTR) +#define MDMA1_SRC_CRC1_CURR_ADDR (DMA23_CURR_ADDR) +#define MDMA1_SRC_CRC1_IRQ_STATUS (DMA23_IRQ_STATUS) +#define MDMA1_SRC_CRC1_CURR_X_COUNT (DMA23_CURR_X_COUNT) +#define MDMA1_SRC_CRC1_CURR_Y_COUNT (DMA23_CURR_Y_COUNT) +#define MDMA1_SRC_CRC1_BWL_COUNT (DMA23_BWL_COUNT) +#define MDMA1_SRC_CRC1_CURR_BWL_COUNT (DMA23_CURR_BWL_COUNT) +#define MDMA1_SRC_CRC1_BWM_COUNT (DMA23_BWM_COUNT) +#define MDMA1_SRC_CRC1_CURR_BWM_COUNT (DMA23_CURR_BWM_COUNT) +#define MDMA2_DEST_NEXT_DESC_PTR (DMA26_NEXT_DESC_PTR) +#define MDMA2_DEST_START_ADDR (DMA26_START_ADDR) +#define MDMA2_DEST_CONFIG (DMA26_CONFIG) +#define MDMA2_DEST_X_COUNT (DMA26_X_COUNT) +#define MDMA2_DEST_X_MODIFY (DMA26_X_MODIFY) +#define MDMA2_DEST_Y_COUNT (DMA26_Y_COUNT) +#define MDMA2_DEST_Y_MODIFY (DMA26_Y_MODIFY) +#define MDMA2_DEST_CURR_DESC_PTR (DMA26_CURR_DESC_PTR) +#define MDMA2_DEST_PREV_DESC_PTR (DMA26_PREV_DESC_PTR) +#define MDMA2_DEST_CURR_ADDR (DMA26_CURR_ADDR) +#define MDMA2_DEST_IRQ_STATUS (DMA26_IRQ_STATUS) +#define MDMA2_DEST_CURR_X_COUNT (DMA26_CURR_X_COUNT) +#define MDMA2_DEST_CURR_Y_COUNT (DMA26_CURR_Y_COUNT) +#define MDMA2_DEST_BWL_COUNT (DMA26_BWL_COUNT) +#define MDMA2_DEST_CURR_BWL_COUNT (DMA26_CURR_BWL_COUNT) +#define MDMA2_DEST_BWM_COUNT (DMA26_BWM_COUNT) +#define MDMA2_DEST_CURR_BWM_COUNT (DMA26_CURR_BWM_COUNT) +#define MDMA2_SRC_NEXT_DESC_PTR (DMA25_NEXT_DESC_PTR) +#define MDMA2_SRC_START_ADDR (DMA25_START_ADDR) +#define MDMA2_SRC_CONFIG (DMA25_CONFIG) +#define MDMA2_SRC_X_COUNT (DMA25_X_COUNT) +#define MDMA2_SRC_X_MODIFY (DMA25_X_MODIFY) +#define MDMA2_SRC_Y_COUNT (DMA25_Y_COUNT) +#define MDMA2_SRC_Y_MODIFY (DMA25_Y_MODIFY) +#define MDMA2_SRC_CURR_DESC_PTR (DMA25_CURR_DESC_PTR) +#define MDMA2_SRC_PREV_DESC_PTR (DMA25_PREV_DESC_PTR) +#define MDMA2_SRC_CURR_ADDR (DMA25_CURR_ADDR) +#define MDMA2_SRC_IRQ_STATUS (DMA25_IRQ_STATUS) +#define MDMA2_SRC_CURR_X_COUNT (DMA25_CURR_X_COUNT) +#define MDMA2_SRC_CURR_Y_COUNT (DMA25_CURR_Y_COUNT) +#define MDMA2_SRC_BWL_COUNT (DMA25_BWL_COUNT) +#define MDMA2_SRC_CURR_BWL_COUNT (DMA25_CURR_BWL_COUNT) +#define MDMA2_SRC_BWM_COUNT (DMA25_BWM_COUNT) +#define MDMA2_SRC_CURR_BWM_COUNT (DMA25_CURR_BWM_COUNT) +#define MDMA3_DEST_NEXT_DESC_PTR (DMA28_NEXT_DESC_PTR) +#define MDMA3_DEST_START_ADDR (DMA28_START_ADDR) +#define MDMA3_DEST_CONFIG (DMA28_CONFIG) +#define MDMA3_DEST_X_COUNT (DMA28_X_COUNT) +#define MDMA3_DEST_X_MODIFY (DMA28_X_MODIFY) +#define MDMA3_DEST_Y_COUNT (DMA28_Y_COUNT) +#define MDMA3_DEST_Y_MODIFY (DMA28_Y_MODIFY) +#define MDMA3_DEST_CURR_DESC_PTR (DMA28_CURR_DESC_PTR) +#define MDMA3_DEST_PREV_DESC_PTR (DMA28_PREV_DESC_PTR) +#define MDMA3_DEST_CURR_ADDR (DMA28_CURR_ADDR) +#define MDMA3_DEST_IRQ_STATUS (DMA28_IRQ_STATUS) +#define MDMA3_DEST_CURR_X_COUNT (DMA28_CURR_X_COUNT) +#define MDMA3_DEST_CURR_Y_COUNT (DMA28_CURR_Y_COUNT) +#define MDMA3_DEST_BWL_COUNT (DMA28_BWL_COUNT) +#define MDMA3_DEST_CURR_BWL_COUNT (DMA28_CURR_BWL_COUNT) +#define MDMA3_DEST_BWM_COUNT (DMA28_BWM_COUNT) +#define MDMA3_DEST_CURR_BWM_COUNT (DMA28_CURR_BWM_COUNT) +#define MDMA3_SRC_NEXT_DESC_PTR (DMA27_NEXT_DESC_PTR) +#define MDMA3_SRC_START_ADDR (DMA27_START_ADDR) +#define MDMA3_SRC_CONFIG (DMA27_CONFIG) +#define MDMA3_SRC_X_COUNT (DMA27_X_COUNT) +#define MDMA3_SRC_X_MODIFY (DMA27_X_MODIFY) +#define MDMA3_SRC_Y_COUNT (DMA27_Y_COUNT) +#define MDMA3_SRC_Y_MODIFY (DMA27_Y_MODIFY) +#define MDMA3_SRC_CURR_DESC_PTR (DMA27_CURR_DESC_PTR) +#define MDMA3_SRC_PREV_DESC_PTR (DMA27_PREV_DESC_PTR) +#define MDMA3_SRC_CURR_ADDR (DMA27_CURR_ADDR) +#define MDMA3_SRC_IRQ_STATUS (DMA27_IRQ_STATUS) +#define MDMA3_SRC_CURR_X_COUNT (DMA27_CURR_X_COUNT) +#define MDMA3_SRC_CURR_Y_COUNT (DMA27_CURR_Y_COUNT) +#define MDMA3_SRC_BWL_COUNT (DMA27_BWL_COUNT) +#define MDMA3_SRC_CURR_BWL_COUNT (DMA27_CURR_BWL_COUNT) +#define MDMA3_SRC_BWM_COUNT (DMA27_BWM_COUNT) +#define MDMA3_SRC_CURR_BWM_COUNT (DMA27_CURR_BWM_COUNT) + + +/* ========================= + DMC Registers + ========================= */ + +/* ========================= + DMC0 + ========================= */ +#define DMC0_ID 0xFFC80000 /* DMC0 Identification Register */ +#define DMC0_CTL 0xFFC80004 /* DMC0 Control Register */ +#define DMC0_STAT 0xFFC80008 /* DMC0 Status Register */ +#define DMC0_EFFCTL 0xFFC8000C /* DMC0 Efficiency Controller */ +#define DMC0_PRIO 0xFFC80010 /* DMC0 Priority ID Register */ +#define DMC0_PRIOMSK 0xFFC80014 /* DMC0 Priority ID Mask */ +#define DMC0_CFG 0xFFC80040 /* DMC0 SDRAM Configuration */ +#define DMC0_TR0 0xFFC80044 /* DMC0 Timing Register 0 */ +#define DMC0_TR1 0xFFC80048 /* DMC0 Timing Register 1 */ +#define DMC0_TR2 0xFFC8004C /* DMC0 Timing Register 2 */ +#define DMC0_MSK 0xFFC8005C /* DMC0 Mode Register Mask */ +#define DMC0_MR 0xFFC80060 /* DMC0 Mode Shadow register */ +#define DMC0_EMR1 0xFFC80064 /* DMC0 EMR1 Shadow Register */ +#define DMC0_EMR2 0xFFC80068 /* DMC0 EMR2 Shadow Register */ +#define DMC0_EMR3 0xFFC8006C /* DMC0 EMR3 Shadow Register */ +#define DMC0_DLLCTL 0xFFC80080 /* DMC0 DLL Control Register */ +#define DMC0_PADCTL 0xFFC800C0 /* DMC0 PAD Control Register 0 */ + +#define DEVSZ_64 0x000 /* DMC External Bank Size = 64Mbit */ +#define DEVSZ_128 0x100 /* DMC External Bank Size = 128Mbit */ +#define DEVSZ_256 0x200 /* DMC External Bank Size = 256Mbit */ +#define DEVSZ_512 0x300 /* DMC External Bank Size = 512Mbit */ +#define DEVSZ_1G 0x400 /* DMC External Bank Size = 1Gbit */ +#define DEVSZ_2G 0x500 /* DMC External Bank Size = 2Gbit */ + +/* ========================= + L2CTL Registers + ========================= */ + +/* ========================= + L2CTL0 + ========================= */ +#define L2CTL0_CTL 0xFFCA3000 /* L2CTL0 L2 Control Register */ +#define L2CTL0_ACTL_C0 0xFFCA3004 /* L2CTL0 L2 Core 0 Access Control Register */ +#define L2CTL0_ACTL_C1 0xFFCA3008 /* L2CTL0 L2 Core 1 Access Control Register */ +#define L2CTL0_ACTL_SYS 0xFFCA300C /* L2CTL0 L2 System Access Control Register */ +#define L2CTL0_STAT 0xFFCA3010 /* L2CTL0 L2 Status Register */ +#define L2CTL0_RPCR 0xFFCA3014 /* L2CTL0 L2 Read Priority Count Register */ +#define L2CTL0_WPCR 0xFFCA3018 /* L2CTL0 L2 Write Priority Count Register */ +#define L2CTL0_RFA 0xFFCA3024 /* L2CTL0 L2 Refresh Address Regsiter */ +#define L2CTL0_ERRADDR0 0xFFCA3040 /* L2CTL0 L2 Bank 0 ECC Error Address Register */ +#define L2CTL0_ERRADDR1 0xFFCA3044 /* L2CTL0 L2 Bank 1 ECC Error Address Register */ +#define L2CTL0_ERRADDR2 0xFFCA3048 /* L2CTL0 L2 Bank 2 ECC Error Address Register */ +#define L2CTL0_ERRADDR3 0xFFCA304C /* L2CTL0 L2 Bank 3 ECC Error Address Register */ +#define L2CTL0_ERRADDR4 0xFFCA3050 /* L2CTL0 L2 Bank 4 ECC Error Address Register */ +#define L2CTL0_ERRADDR5 0xFFCA3054 /* L2CTL0 L2 Bank 5 ECC Error Address Register */ +#define L2CTL0_ERRADDR6 0xFFCA3058 /* L2CTL0 L2 Bank 6 ECC Error Address Register */ +#define L2CTL0_ERRADDR7 0xFFCA305C /* L2CTL0 L2 Bank 7 ECC Error Address Register */ +#define L2CTL0_ET0 0xFFCA3080 /* L2CTL0 L2 AXI Error 0 Type Register */ +#define L2CTL0_EADDR0 0xFFCA3084 /* L2CTL0 L2 AXI Error 0 Address Register */ +#define L2CTL0_ET1 0xFFCA3088 /* L2CTL0 L2 AXI Error 1 Type Register */ +#define L2CTL0_EADDR1 0xFFCA308C /* L2CTL0 L2 AXI Error 1 Address Register */ + + +/* ========================= + SEC Registers + ========================= */ +/* ------------------------------------------------------------------------------------------------------------------------ + SEC Core Interface (SCI) Register Definitions + ------------------------------------------------------------------------------------------------------------------------ */ + +#define SEC_SCI_BASE 0xFFCA4400 +#define SEC_SCI_OFF 0x40 +#define SEC_CCTL 0x0 /* SEC Core Control Register n */ +#define SEC_CSTAT 0x4 /* SEC Core Status Register n */ +#define SEC_CPND 0x8 /* SEC Core Pending IRQ Register n */ +#define SEC_CACT 0xC /* SEC Core Active IRQ Register n */ +#define SEC_CPMSK 0x10 /* SEC Core IRQ Priority Mask Register n */ +#define SEC_CGMSK 0x14 /* SEC Core IRQ Group Mask Register n */ +#define SEC_CPLVL 0x18 /* SEC Core IRQ Priority Level Register n */ +#define SEC_CSID 0x1C /* SEC Core IRQ Source ID Register n */ + +#define bfin_read_SEC_SCI(n, reg) bfin_read32(SEC_SCI_BASE + (n) * SEC_SCI_OFF + reg) +#define bfin_write_SEC_SCI(n, reg, val) \ + bfin_write32(SEC_SCI_BASE + (n) * SEC_SCI_OFF + reg, val) + +/* ------------------------------------------------------------------------------------------------------------------------ + SEC Fault Management Interface (SFI) Register Definitions + ------------------------------------------------------------------------------------------------------------------------ */ +#define SEC_FCTL 0xFFCA4010 /* SEC Fault Control Register */ +#define SEC_FSTAT 0xFFCA4014 /* SEC Fault Status Register */ +#define SEC_FSID 0xFFCA4018 /* SEC Fault Source ID Register */ +#define SEC_FEND 0xFFCA401C /* SEC Fault End Register */ +#define SEC_FDLY 0xFFCA4020 /* SEC Fault Delay Register */ +#define SEC_FDLY_CUR 0xFFCA4024 /* SEC Fault Delay Current Register */ +#define SEC_FSRDLY 0xFFCA4028 /* SEC Fault System Reset Delay Register */ +#define SEC_FSRDLY_CUR 0xFFCA402C /* SEC Fault System Reset Delay Current Register */ +#define SEC_FCOPP 0xFFCA4030 /* SEC Fault COP Period Register */ +#define SEC_FCOPP_CUR 0xFFCA4034 /* SEC Fault COP Period Current Register */ + +/* ------------------------------------------------------------------------------------------------------------------------ + SEC Global Register Definitions + ------------------------------------------------------------------------------------------------------------------------ */ +#define SEC_GCTL 0xFFCA4000 /* SEC Global Control Register */ +#define SEC_GSTAT 0xFFCA4004 /* SEC Global Status Register */ +#define SEC_RAISE 0xFFCA4008 /* SEC Global Raise Register */ +#define SEC_END 0xFFCA400C /* SEC Global End Register */ + +/* ------------------------------------------------------------------------------------------------------------------------ + SEC Source Interface (SSI) Register Definitions + ------------------------------------------------------------------------------------------------------------------------ */ +#define SEC_SCTL0 0xFFCA4800 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL1 0xFFCA4808 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL2 0xFFCA4810 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL3 0xFFCA4818 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL4 0xFFCA4820 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL5 0xFFCA4828 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL6 0xFFCA4830 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL7 0xFFCA4838 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL8 0xFFCA4840 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL9 0xFFCA4848 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL10 0xFFCA4850 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL11 0xFFCA4858 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL12 0xFFCA4860 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL13 0xFFCA4868 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL14 0xFFCA4870 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL15 0xFFCA4878 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL16 0xFFCA4880 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL17 0xFFCA4888 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL18 0xFFCA4890 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL19 0xFFCA4898 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL20 0xFFCA48A0 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL21 0xFFCA48A8 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL22 0xFFCA48B0 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL23 0xFFCA48B8 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL24 0xFFCA48C0 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL25 0xFFCA48C8 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL26 0xFFCA48D0 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL27 0xFFCA48D8 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL28 0xFFCA48E0 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL29 0xFFCA48E8 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL30 0xFFCA48F0 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL31 0xFFCA48F8 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL32 0xFFCA4900 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL33 0xFFCA4908 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL34 0xFFCA4910 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL35 0xFFCA4918 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL36 0xFFCA4920 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL37 0xFFCA4928 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL38 0xFFCA4930 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL39 0xFFCA4938 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL40 0xFFCA4940 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL41 0xFFCA4948 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL42 0xFFCA4950 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL43 0xFFCA4958 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL44 0xFFCA4960 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL45 0xFFCA4968 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL46 0xFFCA4970 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL47 0xFFCA4978 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL48 0xFFCA4980 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL49 0xFFCA4988 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL50 0xFFCA4990 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL51 0xFFCA4998 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL52 0xFFCA49A0 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL53 0xFFCA49A8 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL54 0xFFCA49B0 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL55 0xFFCA49B8 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL56 0xFFCA49C0 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL57 0xFFCA49C8 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL58 0xFFCA49D0 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL59 0xFFCA49D8 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL60 0xFFCA49E0 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL61 0xFFCA49E8 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL62 0xFFCA49F0 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL63 0xFFCA49F8 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL64 0xFFCA4A00 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL65 0xFFCA4A08 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL66 0xFFCA4A10 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL67 0xFFCA4A18 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL68 0xFFCA4A20 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL69 0xFFCA4A28 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL70 0xFFCA4A30 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL71 0xFFCA4A38 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL72 0xFFCA4A40 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL73 0xFFCA4A48 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL74 0xFFCA4A50 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL75 0xFFCA4A58 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL76 0xFFCA4A60 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL77 0xFFCA4A68 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL78 0xFFCA4A70 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL79 0xFFCA4A78 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL80 0xFFCA4A80 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL81 0xFFCA4A88 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL82 0xFFCA4A90 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL83 0xFFCA4A98 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL84 0xFFCA4AA0 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL85 0xFFCA4AA8 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL86 0xFFCA4AB0 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL87 0xFFCA4AB8 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL88 0xFFCA4AC0 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL89 0xFFCA4AC8 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL90 0xFFCA4AD0 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL91 0xFFCA4AD8 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL92 0xFFCA4AE0 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL93 0xFFCA4AE8 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL94 0xFFCA4AF0 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL95 0xFFCA4AF8 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL96 0xFFCA4B00 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL97 0xFFCA4B08 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL98 0xFFCA4B10 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL99 0xFFCA4B18 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL100 0xFFCA4B20 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL101 0xFFCA4B28 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL102 0xFFCA4B30 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL103 0xFFCA4B38 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL104 0xFFCA4B40 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL105 0xFFCA4B48 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL106 0xFFCA4B50 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL107 0xFFCA4B58 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL108 0xFFCA4B60 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL109 0xFFCA4B68 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL110 0xFFCA4B70 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL111 0xFFCA4B78 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL112 0xFFCA4B80 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL113 0xFFCA4B88 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL114 0xFFCA4B90 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL115 0xFFCA4B98 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL116 0xFFCA4BA0 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL117 0xFFCA4BA8 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL118 0xFFCA4BB0 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL119 0xFFCA4BB8 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL120 0xFFCA4BC0 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL121 0xFFCA4BC8 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL122 0xFFCA4BD0 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL123 0xFFCA4BD8 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL124 0xFFCA4BE0 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL125 0xFFCA4BE8 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL126 0xFFCA4BF0 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL127 0xFFCA4BF8 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL128 0xFFCA4C00 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL129 0xFFCA4C08 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL130 0xFFCA4C10 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL131 0xFFCA4C18 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL132 0xFFCA4C20 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL133 0xFFCA4C28 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL134 0xFFCA4C30 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL135 0xFFCA4C38 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL136 0xFFCA4C40 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL137 0xFFCA4C48 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL138 0xFFCA4C50 /* SEC IRQ Source Control Register n */ +#define SEC_SCTL139 0xFFCA4C58 /* SEC IRQ Source Control Register n */ +#define SEC_SSTAT0 0xFFCA4804 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT1 0xFFCA480C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT2 0xFFCA4814 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT3 0xFFCA481C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT4 0xFFCA4824 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT5 0xFFCA482C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT6 0xFFCA4834 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT7 0xFFCA483C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT8 0xFFCA4844 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT9 0xFFCA484C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT10 0xFFCA4854 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT11 0xFFCA485C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT12 0xFFCA4864 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT13 0xFFCA486C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT14 0xFFCA4874 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT15 0xFFCA487C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT16 0xFFCA4884 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT17 0xFFCA488C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT18 0xFFCA4894 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT19 0xFFCA489C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT20 0xFFCA48A4 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT21 0xFFCA48AC /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT22 0xFFCA48B4 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT23 0xFFCA48BC /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT24 0xFFCA48C4 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT25 0xFFCA48CC /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT26 0xFFCA48D4 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT27 0xFFCA48DC /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT28 0xFFCA48E4 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT29 0xFFCA48EC /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT30 0xFFCA48F4 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT31 0xFFCA48FC /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT32 0xFFCA4904 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT33 0xFFCA490C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT34 0xFFCA4914 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT35 0xFFCA491C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT36 0xFFCA4924 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT37 0xFFCA492C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT38 0xFFCA4934 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT39 0xFFCA493C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT40 0xFFCA4944 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT41 0xFFCA494C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT42 0xFFCA4954 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT43 0xFFCA495C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT44 0xFFCA4964 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT45 0xFFCA496C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT46 0xFFCA4974 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT47 0xFFCA497C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT48 0xFFCA4984 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT49 0xFFCA498C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT50 0xFFCA4994 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT51 0xFFCA499C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT52 0xFFCA49A4 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT53 0xFFCA49AC /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT54 0xFFCA49B4 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT55 0xFFCA49BC /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT56 0xFFCA49C4 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT57 0xFFCA49CC /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT58 0xFFCA49D4 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT59 0xFFCA49DC /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT60 0xFFCA49E4 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT61 0xFFCA49EC /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT62 0xFFCA49F4 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT63 0xFFCA49FC /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT64 0xFFCA4A04 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT65 0xFFCA4A0C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT66 0xFFCA4A14 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT67 0xFFCA4A1C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT68 0xFFCA4A24 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT69 0xFFCA4A2C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT70 0xFFCA4A34 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT71 0xFFCA4A3C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT72 0xFFCA4A44 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT73 0xFFCA4A4C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT74 0xFFCA4A54 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT75 0xFFCA4A5C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT76 0xFFCA4A64 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT77 0xFFCA4A6C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT78 0xFFCA4A74 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT79 0xFFCA4A7C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT80 0xFFCA4A84 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT81 0xFFCA4A8C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT82 0xFFCA4A94 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT83 0xFFCA4A9C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT84 0xFFCA4AA4 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT85 0xFFCA4AAC /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT86 0xFFCA4AB4 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT87 0xFFCA4ABC /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT88 0xFFCA4AC4 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT89 0xFFCA4ACC /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT90 0xFFCA4AD4 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT91 0xFFCA4ADC /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT92 0xFFCA4AE4 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT93 0xFFCA4AEC /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT94 0xFFCA4AF4 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT95 0xFFCA4AFC /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT96 0xFFCA4B04 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT97 0xFFCA4B0C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT98 0xFFCA4B14 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT99 0xFFCA4B1C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT100 0xFFCA4B24 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT101 0xFFCA4B2C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT102 0xFFCA4B34 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT103 0xFFCA4B3C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT104 0xFFCA4B44 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT105 0xFFCA4B4C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT106 0xFFCA4B54 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT107 0xFFCA4B5C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT108 0xFFCA4B64 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT109 0xFFCA4B6C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT110 0xFFCA4B74 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT111 0xFFCA4B7C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT112 0xFFCA4B84 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT113 0xFFCA4B8C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT114 0xFFCA4B94 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT115 0xFFCA4B9C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT116 0xFFCA4BA4 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT117 0xFFCA4BAC /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT118 0xFFCA4BB4 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT119 0xFFCA4BBC /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT120 0xFFCA4BC4 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT121 0xFFCA4BCC /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT122 0xFFCA4BD4 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT123 0xFFCA4BDC /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT124 0xFFCA4BE4 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT125 0xFFCA4BEC /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT126 0xFFCA4BF4 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT127 0xFFCA4BFC /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT128 0xFFCA4C04 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT129 0xFFCA4C0C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT130 0xFFCA4C14 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT131 0xFFCA4C1C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT132 0xFFCA4C24 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT133 0xFFCA4C2C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT134 0xFFCA4C34 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT135 0xFFCA4C3C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT136 0xFFCA4C44 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT137 0xFFCA4C4C /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT138 0xFFCA4C54 /* SEC IRQ Source Status Register n */ +#define SEC_SSTAT139 0xFFCA4C5C /* SEC IRQ Source Status Register n */ + +/* ------------------------------------------------------------------------------------------------------------------------ + SEC_CCTL Pos/Masks Description + ------------------------------------------------------------------------------------------------------------------------ */ +#define SEC_CCTL_LOCK 0x80000000 /* LOCK: Lock */ +#define SEC_CCTL_NMI_EN 0x00010000 /* NMIEN: Enable */ +#define SEC_CCTL_WAITIDLE 0x00001000 /* WFI: Wait for Idle */ +#define SEC_CCTL_RESET 0x00000002 /* RESET: Reset */ +#define SEC_CCTL_EN 0x00000001 /* EN: Enable */ + +/* ------------------------------------------------------------------------------------------------------------------------ + SEC_CSTAT Pos/Masks Description + ------------------------------------------------------------------------------------------------------------------------ */ +#define SEC_CSTAT_NMI 0x00010000 /* NMI Status */ +#define SEC_CSTAT_WAITING 0x00001000 /* WFI: Waiting */ +#define SEC_CSTAT_VALID_SID 0x00000400 /* SIDV: Valid */ +#define SEC_CSTAT_VALID_ACT 0x00000200 /* ACTV: Valid */ +#define SEC_CSTAT_VALID_PND 0x00000100 /* PNDV: Valid */ +#define SEC_CSTAT_ERRC 0x00000030 /* Error Cause */ +#define SEC_CSTAT_ACKERR 0x00000010 /* ERRC: Acknowledge Error */ +#define SEC_CSTAT_ERR 0x00000002 /* ERR: Error Occurred */ + +/* ------------------------------------------------------------------------------------------------------------------------ + SEC_CPND Pos/Masks Description + ------------------------------------------------------------------------------------------------------------------------ */ +#define SEC_CPND_PRIO 0x0000FF00 /* Highest Pending IRQ Priority */ +#define SEC_CPND_SID 0x000000FF /* Highest Pending IRQ Source ID */ + +/* ------------------------------------------------------------------------------------------------------------------------ + SEC_CACT Pos/Masks Description + ------------------------------------------------------------------------------------------------------------------------ */ +#define SEC_CACT_PRIO 0x0000FF00 /* Highest Active IRQ Priority */ +#define SEC_CACT_SID 0x000000FF /* Highest Active IRQ Source ID */ + +/* ------------------------------------------------------------------------------------------------------------------------ + SEC_CPMSK Pos/Masks Description + ------------------------------------------------------------------------------------------------------------------------ */ +#define SEC_CPMSK_LOCK 0x80000000 /* LOCK: Lock */ +#define SEC_CPMSK_PRIO 0x000000FF /* IRQ Priority Mask */ + +/* ------------------------------------------------------------------------------------------------------------------------ + SEC_CGMSK Pos/Masks Description + ------------------------------------------------------------------------------------------------------------------------ */ +#define SEC_CGMSK_LOCK 0x80000000 /* LOCK: Lock */ +#define SEC_CGMSK_MASK 0x00000100 /* UGRP: Mask Ungrouped Sources */ +#define SEC_CGMSK_GRP 0x0000000F /* Grouped Mask */ + +/* ------------------------------------------------------------------------------------------------------------------------ + SEC_CPLVL Pos/Masks Description + ------------------------------------------------------------------------------------------------------------------------ */ +#define SEC_CPLVL_LOCK 0x80000000 /* LOCK: Lock */ +#define SEC_CPLVL_PLVL 0x00000007 /* Priority Levels */ + +/* ------------------------------------------------------------------------------------------------------------------------ + SEC_CSID Pos/Masks Description + ------------------------------------------------------------------------------------------------------------------------ */ +#define SEC_CSID_SID 0x000000FF /* Source ID */ + + +/* ------------------------------------------------------------------------------------------------------------------------ + SEC_FCTL Pos/Masks Description + ------------------------------------------------------------------------------------------------------------------------ */ +#define SEC_FCTL_LOCK 0x80000000 /* LOCK: Lock */ +#define SEC_FCTL_FLTPND_MODE 0x00002000 /* TES: Fault Pending Mode */ +#define SEC_FCTL_COP_MODE 0x00001000 /* CMS: COP Mode */ +#define SEC_FCTL_FLTIN_EN 0x00000080 /* FIEN: Enable */ +#define SEC_FCTL_SYSRST_EN 0x00000040 /* SREN: Enable */ +#define SEC_FCTL_TRGOUT_EN 0x00000020 /* TOEN: Enable */ +#define SEC_FCTL_FLTOUT_EN 0x00000010 /* FOEN: Enable */ +#define SEC_FCTL_RESET 0x00000002 /* RESET: Reset */ +#define SEC_FCTL_EN 0x00000001 /* EN: Enable */ + +/* ------------------------------------------------------------------------------------------------------------------------ + SEC_FSTAT Pos/Masks Description + ------------------------------------------------------------------------------------------------------------------------ */ +#define SEC_FSTAT_NXTFLT 0x00000400 /* NPND: Pending */ +#define SEC_FSTAT_FLTACT 0x00000200 /* ACT: Active Fault */ +#define SEC_FSTAT_FLTPND 0x00000100 /* PND: Pending */ +#define SEC_FSTAT_ERRC 0x00000030 /* Error Cause */ +#define SEC_FSTAT_ENDERR 0x00000020 /* ERRC: End Error */ +#define SEC_FSTAT_ERR 0x00000002 /* ERR: Error Occurred */ + +/* ------------------------------------------------------------------------------------------------------------------------ + SEC_FSID Pos/Masks Description + ------------------------------------------------------------------------------------------------------------------------ */ +#define SEC_FSID_SRC_EXTFLT 0x00010000 /* FEXT: Fault External */ +#define SEC_FSID_SID 0x000000FF /* Source ID */ + +/* ------------------------------------------------------------------------------------------------------------------------ + SEC_FEND Pos/Masks Description + ------------------------------------------------------------------------------------------------------------------------ */ +#define SEC_FEND_END_EXTFLT 0x00010000 /* FEXT: Fault External */ +#define SEC_FEND_SID 0x000000FF /* Source ID */ + + +/* ------------------------------------------------------------------------------------------------------------------------ + SEC_GCTL Pos/Masks Description + ------------------------------------------------------------------------------------------------------------------------ */ +#define SEC_GCTL_LOCK 0x80000000 /* Lock */ +#define SEC_GCTL_RESET 0x00000002 /* Reset */ +#define SEC_GCTL_EN 0x00000001 /* Enable */ + +/* ------------------------------------------------------------------------------------------------------------------------ + SEC_GSTAT Pos/Masks Description + ------------------------------------------------------------------------------------------------------------------------ */ +#define SEC_GSTAT_LWERR 0x80000000 /* LWERR: Error Occurred */ +#define SEC_GSTAT_ADRERR 0x40000000 /* ADRERR: Error Occurred */ +#define SEC_GSTAT_SID 0x00FF0000 /* Source ID for SSI Error */ +#define SEC_GSTAT_SCI 0x00000F00 /* SCI ID for SCI Error */ +#define SEC_GSTAT_ERRC 0x00000030 /* Error Cause */ +#define SEC_GSTAT_SCIERR 0x00000010 /* ERRC: SCI Error */ +#define SEC_GSTAT_SSIERR 0x00000020 /* ERRC: SSI Error */ +#define SEC_GSTAT_ERR 0x00000002 /* ERR: Error Occurred */ + +/* ------------------------------------------------------------------------------------------------------------------------ + SEC_RAISE Pos/Masks Description + ------------------------------------------------------------------------------------------------------------------------ */ +#define SEC_RAISE_SID 0x000000FF /* Source ID IRQ Set to Pending */ + +/* ------------------------------------------------------------------------------------------------------------------------ + SEC_END Pos/Masks Description + ------------------------------------------------------------------------------------------------------------------------ */ +#define SEC_END_SID 0x000000FF /* Source ID IRQ to End */ + + +/* ------------------------------------------------------------------------------------------------------------------------ + SEC_SCTL Pos/Masks Description + ------------------------------------------------------------------------------------------------------------------------ */ +#define SEC_SCTL_LOCK 0x80000000 /* Lock */ +#define SEC_SCTL_CTG 0x0F000000 /* Core Target Select */ +#define SEC_SCTL_GRP 0x000F0000 /* Group Select */ +#define SEC_SCTL_PRIO 0x0000FF00 /* Priority Level Select */ +#define SEC_SCTL_ERR_EN 0x00000010 /* ERREN: Enable */ +#define SEC_SCTL_EDGE 0x00000008 /* ES: Edge Sensitive */ +#define SEC_SCTL_SRC_EN 0x00000004 /* SEN: Enable */ +#define SEC_SCTL_FAULT_EN 0x00000002 /* FEN: Enable */ +#define SEC_SCTL_INT_EN 0x00000001 /* IEN: Enable */ + +/* ------------------------------------------------------------------------------------------------------------------------ + SEC_SSTAT Pos/Masks Description + ------------------------------------------------------------------------------------------------------------------------ */ +#define SEC_SSTAT_CHID 0x00FF0000 /* Channel ID */ +#define SEC_SSTAT_ACTIVE_SRC 0x00000200 /* ACT: Active Source */ +#define SEC_SSTAT_PENDING 0x00000100 /* PND: Pending */ +#define SEC_SSTAT_ERRC 0x00000030 /* Error Cause */ +#define SEC_SSTAT_ENDERR 0x00000020 /* ERRC: End Error */ +#define SEC_SSTAT_ERR 0x00000002 /* Error */ + + +/* ========================= + RCU Registers + ========================= */ + +/* ========================= + RCU0 + ========================= */ +#define RCU0_CTL 0xFFCA6000 /* RCU0 Control Register */ +#define RCU0_STAT 0xFFCA6004 /* RCU0 Status Register */ +#define RCU0_CRCTL 0xFFCA6008 /* RCU0 Core Reset Control Register */ +#define RCU0_CRSTAT 0xFFCA600C /* RCU0 Core Reset Status Register */ +#define RCU0_SIDIS 0xFFCA6010 /* RCU0 System Interface Disable Register */ +#define RCU0_SISTAT 0xFFCA6014 /* RCU0 System Interface Status Register */ +#define RCU0_SVECT_LCK 0xFFCA6018 /* RCU0 SVECT Lock Register */ +#define RCU0_BCODE 0xFFCA601C /* RCU0 Boot Code Register */ +#define RCU0_SVECT0 0xFFCA6020 /* RCU0 Software Vector Register n */ +#define RCU0_SVECT1 0xFFCA6024 /* RCU0 Software Vector Register n */ + + +/* ========================= + CGU0 + ========================= */ +#define CGU0_CTL 0xFFCA8000 /* CGU0 Control Register */ +#define CGU0_STAT 0xFFCA8004 /* CGU0 Status Register */ +#define CGU0_DIV 0xFFCA8008 /* CGU0 Divisor Register */ +#define CGU0_CLKOUTSEL 0xFFCA800C /* CGU0 CLKOUT Select Register */ + + +/* ========================= + DPM Registers + ========================= */ + +/* ========================= + DPM0 + ========================= */ +#define DPM0_CTL 0xFFCA9000 /* DPM0 Control Register */ +#define DPM0_STAT 0xFFCA9004 /* DPM0 Status Register */ +#define DPM0_CCBF_DIS 0xFFCA9008 /* DPM0 Core Clock Buffer Disable Register */ +#define DPM0_CCBF_EN 0xFFCA900C /* DPM0 Core Clock Buffer Enable Register */ +#define DPM0_CCBF_STAT 0xFFCA9010 /* DPM0 Core Clock Buffer Status Register */ +#define DPM0_CCBF_STAT_STKY 0xFFCA9014 /* DPM0 Core Clock Buffer Status Sticky Register */ +#define DPM0_SCBF_DIS 0xFFCA9018 /* DPM0 System Clock Buffer Disable Register */ +#define DPM0_WAKE_EN 0xFFCA901C /* DPM0 Wakeup Enable Register */ +#define DPM0_WAKE_POL 0xFFCA9020 /* DPM0 Wakeup Polarity Register */ +#define DPM0_WAKE_STAT 0xFFCA9024 /* DPM0 Wakeup Status Register */ +#define DPM0_HIB_DIS 0xFFCA9028 /* DPM0 Hibernate Disable Register */ +#define DPM0_PGCNTR 0xFFCA902C /* DPM0 Power Good Counter Register */ +#define DPM0_RESTORE0 0xFFCA9030 /* DPM0 Restore Register */ +#define DPM0_RESTORE1 0xFFCA9034 /* DPM0 Restore Register */ +#define DPM0_RESTORE2 0xFFCA9038 /* DPM0 Restore Register */ +#define DPM0_RESTORE3 0xFFCA903C /* DPM0 Restore Register */ +#define DPM0_RESTORE4 0xFFCA9040 /* DPM0 Restore Register */ +#define DPM0_RESTORE5 0xFFCA9044 /* DPM0 Restore Register */ +#define DPM0_RESTORE6 0xFFCA9048 /* DPM0 Restore Register */ +#define DPM0_RESTORE7 0xFFCA904C /* DPM0 Restore Register */ +#define DPM0_RESTORE8 0xFFCA9050 /* DPM0 Restore Register */ +#define DPM0_RESTORE9 0xFFCA9054 /* DPM0 Restore Register */ +#define DPM0_RESTORE10 0xFFCA9058 /* DPM0 Restore Register */ +#define DPM0_RESTORE11 0xFFCA905C /* DPM0 Restore Register */ +#define DPM0_RESTORE12 0xFFCA9060 /* DPM0 Restore Register */ +#define DPM0_RESTORE13 0xFFCA9064 /* DPM0 Restore Register */ +#define DPM0_RESTORE14 0xFFCA9068 /* DPM0 Restore Register */ +#define DPM0_RESTORE15 0xFFCA906C /* DPM0 Restore Register */ + + +/* ========================= + DBG Registers + ========================= */ + +/* USB register */ +#define USB_FADDR 0xFFCC1000 /* USB Device Address in Peripheral Mode */ +#define USB_POWER 0xFFCC1001 /* USB Power and Device Control */ +#define USB_INTRTX 0xFFCC1002 /* USB Transmit Interrupt */ +#define USB_INTRRX 0xFFCC1004 /* USB Receive Interrupts */ +#define USB_INTRTXE 0xFFCC1006 /* USB Transmit Interrupt Enable */ +#define USB_INTRRXE 0xFFCC1008 /* USB Receive Interrupt Enable */ +#define USB_INTRUSB 0xFFCC100A /* USB USB Interrupts */ +#define USB_INTRUSBE 0xFFCC100B /* USB USB Interrupt Enable */ +#define USB_FRAME 0xFFCC100C /* USB Frame Number */ +#define USB_INDEX 0xFFCC100E /* USB Index */ +#define USB_TESTMODE 0xFFCC100F /* USB Testmodes */ +#define USB_EPI_TXMAXP0 0xFFCC1010 /* USB Transmit Maximum Packet Length */ +#define USB_EP_NI0_TXMAXP 0xFFCC1010 +#define USB_EP0I_CSR0_H 0xFFCC1012 /* USB Config and Status EP0 */ +#define USB_EPI_TXCSR0_H 0xFFCC1012 /* USB Transmit Configuration and Status */ +#define USB_EP0I_CSR0_P 0xFFCC1012 /* USB Config and Status EP0 */ +#define USB_EPI_TXCSR0_P 0xFFCC1012 /* USB Transmit Configuration and Status */ +#define USB_EPI_RXMAXP0 0xFFCC1014 /* USB Receive Maximum Packet Length */ +#define USB_EPI_RXCSR0_H 0xFFCC1016 /* USB Receive Configuration and Status Register */ +#define USB_EPI_RXCSR0_P 0xFFCC1016 /* USB Receive Configuration and Status Register */ +#define USB_EP0I_CNT0 0xFFCC1018 /* USB Number of Received Bytes for Endpoint 0 */ +#define USB_EPI_RXCNT0 0xFFCC1018 /* USB Number of Byte Received */ +#define USB_EP0I_TYPE0 0xFFCC101A /* USB Speed for Endpoint 0 */ +#define USB_EPI_TXTYPE0 0xFFCC101A /* USB Transmit Type */ +#define USB_EP0I_NAKLIMIT0 0xFFCC101B /* USB NAK Response Timeout for Endpoint 0 */ +#define USB_EPI_TXINTERVAL0 0xFFCC101B /* USB Transmit Polling Interval */ +#define USB_EPI_RXTYPE0 0xFFCC101C /* USB Receive Type */ +#define USB_EPI_RXINTERVAL0 0xFFCC101D /* USB Receive Polling Interval */ +#define USB_EP0I_CFGDATA0 0xFFCC101F /* USB Configuration Information */ +#define USB_FIFOB0 0xFFCC1020 /* USB FIFO Data */ +#define USB_FIFOB1 0xFFCC1024 /* USB FIFO Data */ +#define USB_FIFOB2 0xFFCC1028 /* USB FIFO Data */ +#define USB_FIFOB3 0xFFCC102C /* USB FIFO Data */ +#define USB_FIFOB4 0xFFCC1030 /* USB FIFO Data */ +#define USB_FIFOB5 0xFFCC1034 /* USB FIFO Data */ +#define USB_FIFOB6 0xFFCC1038 /* USB FIFO Data */ +#define USB_FIFOB7 0xFFCC103C /* USB FIFO Data */ +#define USB_FIFOB8 0xFFCC1040 /* USB FIFO Data */ +#define USB_FIFOB9 0xFFCC1044 /* USB FIFO Data */ +#define USB_FIFOB10 0xFFCC1048 /* USB FIFO Data */ +#define USB_FIFOB11 0xFFCC104C /* USB FIFO Data */ +#define USB_FIFOH0 0xFFCC1020 /* USB FIFO Data */ +#define USB_FIFOH1 0xFFCC1024 /* USB FIFO Data */ +#define USB_FIFOH2 0xFFCC1028 /* USB FIFO Data */ +#define USB_FIFOH3 0xFFCC102C /* USB FIFO Data */ +#define USB_FIFOH4 0xFFCC1030 /* USB FIFO Data */ +#define USB_FIFOH5 0xFFCC1034 /* USB FIFO Data */ +#define USB_FIFOH6 0xFFCC1038 /* USB FIFO Data */ +#define USB_FIFOH7 0xFFCC103C /* USB FIFO Data */ +#define USB_FIFOH8 0xFFCC1040 /* USB FIFO Data */ +#define USB_FIFOH9 0xFFCC1044 /* USB FIFO Data */ +#define USB_FIFOH10 0xFFCC1048 /* USB FIFO Data */ +#define USB_FIFOH11 0xFFCC104C /* USB FIFO Data */ +#define USB_FIFO0 0xFFCC1020 /* USB FIFO Data */ +#define USB_EP0_FIFO 0xFFCC1020 +#define USB_FIFO1 0xFFCC1024 /* USB FIFO Data */ +#define USB_FIFO2 0xFFCC1028 /* USB FIFO Data */ +#define USB_FIFO3 0xFFCC102C /* USB FIFO Data */ +#define USB_FIFO4 0xFFCC1030 /* USB FIFO Data */ +#define USB_FIFO5 0xFFCC1034 /* USB FIFO Data */ +#define USB_FIFO6 0xFFCC1038 /* USB FIFO Data */ +#define USB_FIFO7 0xFFCC103C /* USB FIFO Data */ +#define USB_FIFO8 0xFFCC1040 /* USB FIFO Data */ +#define USB_FIFO9 0xFFCC1044 /* USB FIFO Data */ +#define USB_FIFO10 0xFFCC1048 /* USB FIFO Data */ +#define USB_FIFO11 0xFFCC104C /* USB FIFO Data */ +#define USB_OTG_DEV_CTL 0xFFCC1060 /* USB Device Control */ +#define USB_TXFIFOSZ 0xFFCC1062 /* USB Transmit FIFO Size */ +#define USB_RXFIFOSZ 0xFFCC1063 /* USB Receive FIFO Size */ +#define USB_TXFIFOADDR 0xFFCC1064 /* USB Transmit FIFO Address */ +#define USB_RXFIFOADDR 0xFFCC1066 /* USB Receive FIFO Address */ +#define USB_VENDSTAT 0xFFCC1068 /* USB Vendor Status */ +#define USB_HWVERS 0xFFCC106C /* USB Hardware Version */ +#define USB_EPINFO 0xFFCC1078 /* USB Endpoint Info */ +#define USB_RAMINFO 0xFFCC1079 /* USB Ram Information */ +#define USB_LINKINFO 0xFFCC107A /* USB Programmable Delay Values */ +#define USB_VPLEN 0xFFCC107B /* USB VBus Pulse Duration */ +#define USB_HS_EOF1 0xFFCC107C /* USB High Speed End of Frame Remaining */ +#define USB_FS_EOF1 0xFFCC107D /* USB Full Speed End of Frame Remaining */ +#define USB_LS_EOF1 0xFFCC107E /* USB Low Speed End of Frame Remaining */ +#define USB_SOFT_RST 0xFFCC107F /* USB Software Reset */ +#define USB_TXFUNCADDR0 0xFFCC1080 /* USB Transmit Function Address */ +#define USB_TXFUNCADDR1 0xFFCC1088 /* USB Transmit Function Address */ +#define USB_TXFUNCADDR2 0xFFCC1090 /* USB Transmit Function Address */ +#define USB_TXFUNCADDR3 0xFFCC1098 /* USB Transmit Function Address */ +#define USB_TXFUNCADDR4 0xFFCC10A0 /* USB Transmit Function Address */ +#define USB_TXFUNCADDR5 0xFFCC10A8 /* USB Transmit Function Address */ +#define USB_TXFUNCADDR6 0xFFCC10B0 /* USB Transmit Function Address */ +#define USB_TXFUNCADDR7 0xFFCC10B8 /* USB Transmit Function Address */ +#define USB_TXFUNCADDR8 0xFFCC10C0 /* USB Transmit Function Address */ +#define USB_TXFUNCADDR9 0xFFCC10C8 /* USB Transmit Function Address */ +#define USB_TXFUNCADDR10 0xFFCC10D0 /* USB Transmit Function Address */ +#define USB_TXFUNCADDR11 0xFFCC10D8 /* USB Transmit Function Address */ +#define USB_TXHUBADDR0 0xFFCC1082 /* USB Transmit Hub Address */ +#define USB_TXHUBADDR1 0xFFCC108A /* USB Transmit Hub Address */ +#define USB_TXHUBADDR2 0xFFCC1092 /* USB Transmit Hub Address */ +#define USB_TXHUBADDR3 0xFFCC109A /* USB Transmit Hub Address */ +#define USB_TXHUBADDR4 0xFFCC10A2 /* USB Transmit Hub Address */ +#define USB_TXHUBADDR5 0xFFCC10AA /* USB Transmit Hub Address */ +#define USB_TXHUBADDR6 0xFFCC10B2 /* USB Transmit Hub Address */ +#define USB_TXHUBADDR7 0xFFCC10BA /* USB Transmit Hub Address */ +#define USB_TXHUBADDR8 0xFFCC10C2 /* USB Transmit Hub Address */ +#define USB_TXHUBADDR9 0xFFCC10CA /* USB Transmit Hub Address */ +#define USB_TXHUBADDR10 0xFFCC10D2 /* USB Transmit Hub Address */ +#define USB_TXHUBADDR11 0xFFCC10DA /* USB Transmit Hub Address */ +#define USB_TXHUBPORT0 0xFFCC1083 /* USB Transmit Hub Port */ +#define USB_TXHUBPORT1 0xFFCC108B /* USB Transmit Hub Port */ +#define USB_TXHUBPORT2 0xFFCC1093 /* USB Transmit Hub Port */ +#define USB_TXHUBPORT3 0xFFCC109B /* USB Transmit Hub Port */ +#define USB_TXHUBPORT4 0xFFCC10A3 /* USB Transmit Hub Port */ +#define USB_TXHUBPORT5 0xFFCC10AB /* USB Transmit Hub Port */ +#define USB_TXHUBPORT6 0xFFCC10B3 /* USB Transmit Hub Port */ +#define USB_TXHUBPORT7 0xFFCC10BB /* USB Transmit Hub Port */ +#define USB_TXHUBPORT8 0xFFCC10C3 /* USB Transmit Hub Port */ +#define USB_TXHUBPORT9 0xFFCC10CB /* USB Transmit Hub Port */ +#define USB_TXHUBPORT10 0xFFCC10D3 /* USB Transmit Hub Port */ +#define USB_TXHUBPORT11 0xFFCC10DB /* USB Transmit Hub Port */ +#define USB_RXFUNCADDR0 0xFFCC1084 /* USB Receive Function Address */ +#define USB_RXFUNCADDR1 0xFFCC108C /* USB Receive Function Address */ +#define USB_RXFUNCADDR2 0xFFCC1094 /* USB Receive Function Address */ +#define USB_RXFUNCADDR3 0xFFCC109C /* USB Receive Function Address */ +#define USB_RXFUNCADDR4 0xFFCC10A4 /* USB Receive Function Address */ +#define USB_RXFUNCADDR5 0xFFCC10AC /* USB Receive Function Address */ +#define USB_RXFUNCADDR6 0xFFCC10B4 /* USB Receive Function Address */ +#define USB_RXFUNCADDR7 0xFFCC10BC /* USB Receive Function Address */ +#define USB_RXFUNCADDR8 0xFFCC10C4 /* USB Receive Function Address */ +#define USB_RXFUNCADDR9 0xFFCC10CC /* USB Receive Function Address */ +#define USB_RXFUNCADDR10 0xFFCC10D4 /* USB Receive Function Address */ +#define USB_RXFUNCADDR11 0xFFCC10DC /* USB Receive Function Address */ +#define USB_RXHUBADDR0 0xFFCC1086 /* USB Receive Hub Address */ +#define USB_RXHUBADDR1 0xFFCC108E /* USB Receive Hub Address */ +#define USB_RXHUBADDR2 0xFFCC1096 /* USB Receive Hub Address */ +#define USB_RXHUBADDR3 0xFFCC109E /* USB Receive Hub Address */ +#define USB_RXHUBADDR4 0xFFCC10A6 /* USB Receive Hub Address */ +#define USB_RXHUBADDR5 0xFFCC10AE /* USB Receive Hub Address */ +#define USB_RXHUBADDR6 0xFFCC10B6 /* USB Receive Hub Address */ +#define USB_RXHUBADDR7 0xFFCC10BE /* USB Receive Hub Address */ +#define USB_RXHUBADDR8 0xFFCC10C6 /* USB Receive Hub Address */ +#define USB_RXHUBADDR9 0xFFCC10CE /* USB Receive Hub Address */ +#define USB_RXHUBADDR10 0xFFCC10D6 /* USB Receive Hub Address */ +#define USB_RXHUBADDR11 0xFFCC10DE /* USB Receive Hub Address */ +#define USB_RXHUBPORT0 0xFFCC1087 /* USB Receive Hub Port */ +#define USB_RXHUBPORT1 0xFFCC108F /* USB Receive Hub Port */ +#define USB_RXHUBPORT2 0xFFCC1097 /* USB Receive Hub Port */ +#define USB_RXHUBPORT3 0xFFCC109F /* USB Receive Hub Port */ +#define USB_RXHUBPORT4 0xFFCC10A7 /* USB Receive Hub Port */ +#define USB_RXHUBPORT5 0xFFCC10AF /* USB Receive Hub Port */ +#define USB_RXHUBPORT6 0xFFCC10B7 /* USB Receive Hub Port */ +#define USB_RXHUBPORT7 0xFFCC10BF /* USB Receive Hub Port */ +#define USB_RXHUBPORT8 0xFFCC10C7 /* USB Receive Hub Port */ +#define USB_RXHUBPORT9 0xFFCC10CF /* USB Receive Hub Port */ +#define USB_RXHUBPORT10 0xFFCC10D7 /* USB Receive Hub Port */ +#define USB_RXHUBPORT11 0xFFCC10DF /* USB Receive Hub Port */ +#define USB_EP0_CSR0_H 0xFFCC1102 /* USB Config and Status EP0 */ +#define USB_EP0_CSR0_P 0xFFCC1102 /* USB Config and Status EP0 */ +#define USB_EP0_CNT0 0xFFCC1108 /* USB Number of Received Bytes for Endpoint 0 */ +#define USB_EP0_TYPE0 0xFFCC110A /* USB Speed for Endpoint 0 */ +#define USB_EP0_NAKLIMIT0 0xFFCC110B /* USB NAK Response Timeout for Endpoint 0 */ +#define USB_EP0_CFGDATA0 0xFFCC110F /* USB Configuration Information */ +#define USB_EP_TXMAXP0 0xFFCC1110 /* USB Transmit Maximum Packet Length */ +#define USB_EP_TXMAXP1 0xFFCC1120 /* USB Transmit Maximum Packet Length */ +#define USB_EP_TXMAXP2 0xFFCC1130 /* USB Transmit Maximum Packet Length */ +#define USB_EP_TXMAXP3 0xFFCC1140 /* USB Transmit Maximum Packet Length */ +#define USB_EP_TXMAXP4 0xFFCC1150 /* USB Transmit Maximum Packet Length */ +#define USB_EP_TXMAXP5 0xFFCC1160 /* USB Transmit Maximum Packet Length */ +#define USB_EP_TXMAXP6 0xFFCC1170 /* USB Transmit Maximum Packet Length */ +#define USB_EP_TXMAXP7 0xFFCC1180 /* USB Transmit Maximum Packet Length */ +#define USB_EP_TXMAXP8 0xFFCC1190 /* USB Transmit Maximum Packet Length */ +#define USB_EP_TXMAXP9 0xFFCC11A0 /* USB Transmit Maximum Packet Length */ +#define USB_EP_TXMAXP10 0xFFCC11B0 /* USB Transmit Maximum Packet Length */ +#define USB_EP_TXCSR0_H 0xFFCC1112 /* USB Transmit Configuration and Status */ +#define USB_EP_TXCSR1_H 0xFFCC1122 /* USB Transmit Configuration and Status */ +#define USB_EP_TXCSR2_H 0xFFCC1132 /* USB Transmit Configuration and Status */ +#define USB_EP_TXCSR3_H 0xFFCC1142 /* USB Transmit Configuration and Status */ +#define USB_EP_TXCSR4_H 0xFFCC1152 /* USB Transmit Configuration and Status */ +#define USB_EP_TXCSR5_H 0xFFCC1162 /* USB Transmit Configuration and Status */ +#define USB_EP_TXCSR6_H 0xFFCC1172 /* USB Transmit Configuration and Status */ +#define USB_EP_TXCSR7_H 0xFFCC1182 /* USB Transmit Configuration and Status */ +#define USB_EP_TXCSR8_H 0xFFCC1192 /* USB Transmit Configuration and Status */ +#define USB_EP_TXCSR9_H 0xFFCC11A2 /* USB Transmit Configuration and Status */ +#define USB_EP_TXCSR10_H 0xFFCC11B2 /* USB Transmit Configuration and Status */ +#define USB_EP_TXCSR0_P 0xFFCC1112 /* USB Transmit Configuration and Status */ +#define USB_EP_TXCSR1_P 0xFFCC1122 /* USB Transmit Configuration and Status */ +#define USB_EP_TXCSR2_P 0xFFCC1132 /* USB Transmit Configuration and Status */ +#define USB_EP_TXCSR3_P 0xFFCC1142 /* USB Transmit Configuration and Status */ +#define USB_EP_TXCSR4_P 0xFFCC1152 /* USB Transmit Configuration and Status */ +#define USB_EP_TXCSR5_P 0xFFCC1162 /* USB Transmit Configuration and Status */ +#define USB_EP_TXCSR6_P 0xFFCC1172 /* USB Transmit Configuration and Status */ +#define USB_EP_TXCSR7_P 0xFFCC1182 /* USB Transmit Configuration and Status */ +#define USB_EP_TXCSR8_P 0xFFCC1192 /* USB Transmit Configuration and Status */ +#define USB_EP_TXCSR9_P 0xFFCC11A2 /* USB Transmit Configuration and Status */ +#define USB_EP_TXCSR10_P 0xFFCC11B2 /* USB Transmit Configuration and Status */ +#define USB_EP_RXMAXP0 0xFFCC1114 /* USB Receive Maximum Packet Length */ +#define USB_EP_RXMAXP1 0xFFCC1124 /* USB Receive Maximum Packet Length */ +#define USB_EP_RXMAXP2 0xFFCC1134 /* USB Receive Maximum Packet Length */ +#define USB_EP_RXMAXP3 0xFFCC1144 /* USB Receive Maximum Packet Length */ +#define USB_EP_RXMAXP4 0xFFCC1154 /* USB Receive Maximum Packet Length */ +#define USB_EP_RXMAXP5 0xFFCC1164 /* USB Receive Maximum Packet Length */ +#define USB_EP_RXMAXP6 0xFFCC1174 /* USB Receive Maximum Packet Length */ +#define USB_EP_RXMAXP7 0xFFCC1184 /* USB Receive Maximum Packet Length */ +#define USB_EP_RXMAXP8 0xFFCC1194 /* USB Receive Maximum Packet Length */ +#define USB_EP_RXMAXP9 0xFFCC11A4 /* USB Receive Maximum Packet Length */ +#define USB_EP_RXMAXP10 0xFFCC11B4 /* USB Receive Maximum Packet Length */ +#define USB_EP_RXCSR0_H 0xFFCC1116 /* USB Receive Configuration and Status Register */ +#define USB_EP_RXCSR1_H 0xFFCC1126 /* USB Receive Configuration and Status Register */ +#define USB_EP_RXCSR2_H 0xFFCC1136 /* USB Receive Configuration and Status Register */ +#define USB_EP_RXCSR3_H 0xFFCC1146 /* USB Receive Configuration and Status Register */ +#define USB_EP_RXCSR4_H 0xFFCC1156 /* USB Receive Configuration and Status Register */ +#define USB_EP_RXCSR5_H 0xFFCC1166 /* USB Receive Configuration and Status Register */ +#define USB_EP_RXCSR6_H 0xFFCC1176 /* USB Receive Configuration and Status Register */ +#define USB_EP_RXCSR7_H 0xFFCC1186 /* USB Receive Configuration and Status Register */ +#define USB_EP_RXCSR8_H 0xFFCC1196 /* USB Receive Configuration and Status Register */ +#define USB_EP_RXCSR9_H 0xFFCC11A6 /* USB Receive Configuration and Status Register */ +#define USB_EP_RXCSR10_H 0xFFCC11B6 /* USB Receive Configuration and Status Register */ +#define USB_EP_RXCSR0_P 0xFFCC1116 /* USB Receive Configuration and Status Register */ +#define USB_EP_RXCSR1_P 0xFFCC1126 /* USB Receive Configuration and Status Register */ +#define USB_EP_RXCSR2_P 0xFFCC1136 /* USB Receive Configuration and Status Register */ +#define USB_EP_RXCSR3_P 0xFFCC1146 /* USB Receive Configuration and Status Register */ +#define USB_EP_RXCSR4_P 0xFFCC1156 /* USB Receive Configuration and Status Register */ +#define USB_EP_RXCSR5_P 0xFFCC1166 /* USB Receive Configuration and Status Register */ +#define USB_EP_RXCSR6_P 0xFFCC1176 /* USB Receive Configuration and Status Register */ +#define USB_EP_RXCSR7_P 0xFFCC1186 /* USB Receive Configuration and Status Register */ +#define USB_EP_RXCSR8_P 0xFFCC1196 /* USB Receive Configuration and Status Register */ +#define USB_EP_RXCSR9_P 0xFFCC11A6 /* USB Receive Configuration and Status Register */ +#define USB_EP_RXCSR10_P 0xFFCC11B6 /* USB Receive Configuration and Status Register */ +#define USB_EP_RXCNT0 0xFFCC1118 /* USB Number of Byte Received */ +#define USB_EP_RXCNT1 0xFFCC1128 /* USB Number of Byte Received */ +#define USB_EP_RXCNT2 0xFFCC1138 /* USB Number of Byte Received */ +#define USB_EP_RXCNT3 0xFFCC1148 /* USB Number of Byte Received */ +#define USB_EP_RXCNT4 0xFFCC1158 /* USB Number of Byte Received */ +#define USB_EP_RXCNT5 0xFFCC1168 /* USB Number of Byte Received */ +#define USB_EP_RXCNT6 0xFFCC1178 /* USB Number of Byte Received */ +#define USB_EP_RXCNT7 0xFFCC1188 /* USB Number of Byte Received */ +#define USB_EP_RXCNT8 0xFFCC1198 /* USB Number of Byte Received */ +#define USB_EP_RXCNT9 0xFFCC11A8 /* USB Number of Byte Received */ +#define USB_EP_RXCNT10 0xFFCC11B8 /* USB Number of Byte Received */ +#define USB_EP_TXTYPE0 0xFFCC111A /* USB Transmit Type */ +#define USB_EP_TXTYPE1 0xFFCC112A /* USB Transmit Type */ +#define USB_EP_TXTYPE2 0xFFCC113A /* USB Transmit Type */ +#define USB_EP_TXTYPE3 0xFFCC114A /* USB Transmit Type */ +#define USB_EP_TXTYPE4 0xFFCC115A /* USB Transmit Type */ +#define USB_EP_TXTYPE5 0xFFCC116A /* USB Transmit Type */ +#define USB_EP_TXTYPE6 0xFFCC117A /* USB Transmit Type */ +#define USB_EP_TXTYPE7 0xFFCC118A /* USB Transmit Type */ +#define USB_EP_TXTYPE8 0xFFCC119A /* USB Transmit Type */ +#define USB_EP_TXTYPE9 0xFFCC11AA /* USB Transmit Type */ +#define USB_EP_TXTYPE10 0xFFCC11BA /* USB Transmit Type */ +#define USB_EP_TXINTERVAL0 0xFFCC111B /* USB Transmit Polling Interval */ +#define USB_EP_TXINTERVAL1 0xFFCC112B /* USB Transmit Polling Interval */ +#define USB_EP_TXINTERVAL2 0xFFCC113B /* USB Transmit Polling Interval */ +#define USB_EP_TXINTERVAL3 0xFFCC114B /* USB Transmit Polling Interval */ +#define USB_EP_TXINTERVAL4 0xFFCC115B /* USB Transmit Polling Interval */ +#define USB_EP_TXINTERVAL5 0xFFCC116B /* USB Transmit Polling Interval */ +#define USB_EP_TXINTERVAL6 0xFFCC117B /* USB Transmit Polling Interval */ +#define USB_EP_TXINTERVAL7 0xFFCC118B /* USB Transmit Polling Interval */ +#define USB_EP_TXINTERVAL8 0xFFCC119B /* USB Transmit Polling Interval */ +#define USB_EP_TXINTERVAL9 0xFFCC11AB /* USB Transmit Polling Interval */ +#define USB_EP_TXINTERVAL10 0xFFCC11BB /* USB Transmit Polling Interval */ +#define USB_EP_RXTYPE0 0xFFCC111C /* USB Receive Type */ +#define USB_EP_RXTYPE1 0xFFCC112C /* USB Receive Type */ +#define USB_EP_RXTYPE2 0xFFCC113C /* USB Receive Type */ +#define USB_EP_RXTYPE3 0xFFCC114C /* USB Receive Type */ +#define USB_EP_RXTYPE4 0xFFCC115C /* USB Receive Type */ +#define USB_EP_RXTYPE5 0xFFCC116C /* USB Receive Type */ +#define USB_EP_RXTYPE6 0xFFCC117C /* USB Receive Type */ +#define USB_EP_RXTYPE7 0xFFCC118C /* USB Receive Type */ +#define USB_EP_RXTYPE8 0xFFCC119C /* USB Receive Type */ +#define USB_EP_RXTYPE9 0xFFCC11AC /* USB Receive Type */ +#define USB_EP_RXTYPE10 0xFFCC11BC /* USB Receive Type */ +#define USB_EP_RXINTERVAL0 0xFFCC111D /* USB Receive Polling Interval */ +#define USB_EP_RXINTERVAL1 0xFFCC112D /* USB Receive Polling Interval */ +#define USB_EP_RXINTERVAL2 0xFFCC113D /* USB Receive Polling Interval */ +#define USB_EP_RXINTERVAL3 0xFFCC114D /* USB Receive Polling Interval */ +#define USB_EP_RXINTERVAL4 0xFFCC115D /* USB Receive Polling Interval */ +#define USB_EP_RXINTERVAL5 0xFFCC116D /* USB Receive Polling Interval */ +#define USB_EP_RXINTERVAL6 0xFFCC117D /* USB Receive Polling Interval */ +#define USB_EP_RXINTERVAL7 0xFFCC118D /* USB Receive Polling Interval */ +#define USB_EP_RXINTERVAL8 0xFFCC119D /* USB Receive Polling Interval */ +#define USB_EP_RXINTERVAL9 0xFFCC11AD /* USB Receive Polling Interval */ +#define USB_EP_RXINTERVAL10 0xFFCC11BD /* USB Receive Polling Interval */ +#define USB_DMA_IRQ 0xFFCC1200 /* USB Interrupt Register */ +#define USB_DMA_CTL0 0xFFCC1204 /* USB DMA Control */ +#define USB_DMA_CTL1 0xFFCC1214 /* USB DMA Control */ +#define USB_DMA_CTL2 0xFFCC1224 /* USB DMA Control */ +#define USB_DMA_CTL3 0xFFCC1234 /* USB DMA Control */ +#define USB_DMA_CTL4 0xFFCC1244 /* USB DMA Control */ +#define USB_DMA_CTL5 0xFFCC1254 /* USB DMA Control */ +#define USB_DMA_CTL6 0xFFCC1264 /* USB DMA Control */ +#define USB_DMA_CTL7 0xFFCC1274 /* USB DMA Control */ +#define USB_DMA_ADDR0 0xFFCC1208 /* USB DMA Address */ +#define USB_DMA_ADDR1 0xFFCC1218 /* USB DMA Address */ +#define USB_DMA_ADDR2 0xFFCC1228 /* USB DMA Address */ +#define USB_DMA_ADDR3 0xFFCC1238 /* USB DMA Address */ +#define USB_DMA_ADDR4 0xFFCC1248 /* USB DMA Address */ +#define USB_DMA_ADDR5 0xFFCC1258 /* USB DMA Address */ +#define USB_DMA_ADDR6 0xFFCC1268 /* USB DMA Address */ +#define USB_DMA_ADDR7 0xFFCC1278 /* USB DMA Address */ +#define USB_DMA_CNT0 0xFFCC120C /* USB DMA Count */ +#define USB_DMA_CNT1 0xFFCC121C /* USB DMA Count */ +#define USB_DMA_CNT2 0xFFCC122C /* USB DMA Count */ +#define USB_DMA_CNT3 0xFFCC123C /* USB DMA Count */ +#define USB_DMA_CNT4 0xFFCC124C /* USB DMA Count */ +#define USB_DMA_CNT5 0xFFCC125C /* USB DMA Count */ +#define USB_DMA_CNT6 0xFFCC126C /* USB DMA Count */ +#define USB_DMA_CNT7 0xFFCC127C /* USB DMA Count */ +#define USB_RQPKTCNT0 0xFFCC1300 /* USB Request Packet Count */ +#define USB_RQPKTCNT1 0xFFCC1304 /* USB Request Packet Count */ +#define USB_RQPKTCNT2 0xFFCC1308 /* USB Request Packet Count */ +#define USB_RQPKTCNT3 0xFFCC130C /* USB Request Packet Count */ +#define USB_RQPKTCNT4 0xFFCC1310 /* USB Request Packet Count */ +#define USB_RQPKTCNT5 0xFFCC1314 /* USB Request Packet Count */ +#define USB_RQPKTCNT6 0xFFCC1318 /* USB Request Packet Count */ +#define USB_RQPKTCNT7 0xFFCC131C /* USB Request Packet Count */ +#define USB_RQPKTCNT8 0xFFCC1320 /* USB Request Packet Count */ +#define USB_RQPKTCNT9 0xFFCC1324 /* USB Request Packet Count */ +#define USB_RQPKTCNT10 0xFFCC1328 /* USB Request Packet Count */ +#define USB_CT_UCH 0xFFCC1344 /* USB Chirp Timeout */ +#define USB_CT_HHSRTN 0xFFCC1346 /* USB High Speed Resume Return to Normal */ +#define USB_CT_HSBT 0xFFCC1348 /* USB High Speed Timeout */ +#define USB_LPM_ATTR 0xFFCC1360 /* USB LPM Attribute */ +#define USB_LPM_CTL 0xFFCC1362 /* USB LPM Control */ +#define USB_LPM_IEN 0xFFCC1363 /* USB LPM Interrupt Enable */ +#define USB_LPM_IRQ 0xFFCC1364 /* USB LPM Interrupt */ +#define USB_LPM_FADDR 0xFFCC1365 /* USB LPM Function Address */ +#define USB_VBUS_CTL 0xFFCC1380 /* USB VBus Control */ +#define USB_BAT_CHG 0xFFCC1381 /* USB Battery Charging */ +#define USB_PHY_CTL 0xFFCC1394 /* USB PHY Control */ +#define USB_TESTCTL 0xFFCC1397 /* USB Test Control */ +#define USB_PLL_OSC 0xFFCC1398 /* USB PLL and Oscillator Control */ + + + +/* ========================= + CHIPID + ========================= */ + +#define CHIPID 0xffc00014 +/* CHIPID Masks */ +#define CHIPID_VERSION 0xF0000000 +#define CHIPID_FAMILY 0x0FFFF000 +#define CHIPID_MANUFACTURE 0x00000FFE + + +#endif /* _DEF_BF60X_H */ diff --git a/arch/blackfin/mach-bf609/include/mach/dma.h b/arch/blackfin/mach-bf609/include/mach/dma.h new file mode 100644 index 00000000000..872d141ca11 --- /dev/null +++ b/arch/blackfin/mach-bf609/include/mach/dma.h @@ -0,0 +1,116 @@ +/* mach/dma.h - arch-specific DMA defines + * + * Copyright 2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _MACH_DMA_H_ +#define _MACH_DMA_H_ + +#define CH_SPORT0_TX 0 +#define CH_SPORT0_RX 1 +#define CH_SPORT1_TX 2 +#define CH_SPORT1_RX 3 +#define CH_SPORT2_TX 4 +#define CH_SPORT2_RX 5 +#define CH_SPI0_TX 6 +#define CH_SPI0_RX 7 +#define CH_SPI1_TX 8 +#define CH_SPI1_RX 9 +#define CH_RSI 10 +#define CH_SDU 11 +#define CH_LP0 13 +#define CH_LP1 14 +#define CH_LP2 15 +#define CH_LP3 16 +#define CH_UART0_TX 17 +#define CH_UART0_RX 18 +#define CH_UART1_TX 19 +#define CH_UART1_RX 20 +#define CH_MEM_STREAM0_SRC_CRC0 21 +#define CH_MEM_STREAM0_SRC CH_MEM_STREAM0_SRC_CRC0 +#define CH_MEM_STREAM0_DEST_CRC0 22 +#define CH_MEM_STREAM0_DEST CH_MEM_STREAM0_DEST_CRC0 +#define CH_MEM_STREAM1_SRC_CRC1 23 +#define CH_MEM_STREAM1_SRC CH_MEM_STREAM1_SRC_CRC1 +#define CH_MEM_STREAM1_DEST_CRC1 24 +#define CH_MEM_STREAM1_DEST CH_MEM_STREAM1_DEST_CRC1 +#define CH_MEM_STREAM2_SRC 25 +#define CH_MEM_STREAM2_DEST 26 +#define CH_MEM_STREAM3_SRC 27 +#define CH_MEM_STREAM3_DEST 28 +#define CH_EPPI0_CH0 29 +#define CH_EPPI0_CH1 30 +#define CH_EPPI1_CH0 31 +#define CH_EPPI1_CH1 32 +#define CH_EPPI2_CH0 33 +#define CH_EPPI2_CH1 34 +#define CH_PIXC_CH0 35 +#define CH_PIXC_CH1 36 +#define CH_PIXC_CH2 37 +#define CH_PVP_CPDOB 38 +#define CH_PVP_CPDOC 39 +#define CH_PVP_CPSTAT 40 +#define CH_PVP_CPCI 41 +#define CH_PVP_MPDO 42 +#define CH_PVP_MPDI 43 +#define CH_PVP_MPSTAT 44 +#define CH_PVP_MPCI 45 +#define CH_PVP_CPDOA 46 + +#define MAX_DMA_CHANNELS 47 +#define MAX_DMA_SUSPEND_CHANNELS 0 +#define DMA_MMR_SIZE_32 + +#define bfin_read_MDMA_S0_CONFIG bfin_read_MDMA0_SRC_CRC0_CONFIG +#define bfin_write_MDMA_S0_CONFIG bfin_write_MDMA0_SRC_CRC0_CONFIG +#define bfin_read_MDMA_S0_IRQ_STATUS bfin_read_MDMA0_SRC_CRC0_IRQ_STATUS +#define bfin_write_MDMA_S0_IRQ_STATUS bfin_write_MDMA0_SRC_CRC0_IRQ_STATUS +#define bfin_write_MDMA_S0_START_ADDR bfin_write_MDMA0_SRC_CRC0_START_ADDR +#define bfin_write_MDMA_S0_X_COUNT bfin_write_MDMA0_SRC_CRC0_X_COUNT +#define bfin_write_MDMA_S0_X_MODIFY bfin_write_MDMA0_SRC_CRC0_X_MODIFY +#define bfin_write_MDMA_S0_Y_COUNT bfin_write_MDMA0_SRC_CRC0_Y_COUNT +#define bfin_write_MDMA_S0_Y_MODIFY bfin_write_MDMA0_SRC_CRC0_Y_MODIFY +#define bfin_read_MDMA_D0_CONFIG bfin_read_MDMA0_DEST_CRC0_CONFIG +#define bfin_write_MDMA_D0_CONFIG bfin_write_MDMA0_DEST_CRC0_CONFIG +#define bfin_read_MDMA_D0_IRQ_STATUS bfin_read_MDMA0_DEST_CRC0_IRQ_STATUS +#define bfin_write_MDMA_D0_IRQ_STATUS bfin_write_MDMA0_DEST_CRC0_IRQ_STATUS +#define bfin_write_MDMA_D0_START_ADDR bfin_write_MDMA0_DEST_CRC0_START_ADDR +#define bfin_write_MDMA_D0_X_COUNT bfin_write_MDMA0_DEST_CRC0_X_COUNT +#define bfin_write_MDMA_D0_X_MODIFY bfin_write_MDMA0_DEST_CRC0_X_MODIFY +#define bfin_write_MDMA_D0_Y_COUNT bfin_write_MDMA0_DEST_CRC0_Y_COUNT +#define bfin_write_MDMA_D0_Y_MODIFY bfin_write_MDMA0_DEST_CRC0_Y_MODIFY + +#define bfin_read_MDMA_S1_CONFIG bfin_read_MDMA1_SRC_CRC1_CONFIG +#define bfin_write_MDMA_S1_CONFIG bfin_write_MDMA1_SRC_CRC1_CONFIG +#define bfin_read_MDMA_D1_CONFIG bfin_read_MDMA1_DEST_CRC1_CONFIG +#define bfin_write_MDMA_D1_CONFIG bfin_write_MDMA1_DEST_CRC1_CONFIG +#define bfin_read_MDMA_D1_IRQ_STATUS bfin_read_MDMA1_DEST_CRC1_IRQ_STATUS +#define bfin_write_MDMA_D1_IRQ_STATUS bfin_write_MDMA1_DEST_CRC1_IRQ_STATUS + +#define bfin_read_MDMA_S3_CONFIG bfin_read_MDMA3_SRC_CONFIG +#define bfin_write_MDMA_S3_CONFIG bfin_write_MDMA3_SRC_CONFIG +#define bfin_read_MDMA_S3_IRQ_STATUS bfin_read_MDMA3_SRC_IRQ_STATUS +#define bfin_write_MDMA_S3_IRQ_STATUS bfin_write_MDMA3_SRC_IRQ_STATUS +#define bfin_write_MDMA_S3_START_ADDR bfin_write_MDMA3_SRC_START_ADDR +#define bfin_write_MDMA_S3_X_COUNT bfin_write_MDMA3_SRC_X_COUNT +#define bfin_write_MDMA_S3_X_MODIFY bfin_write_MDMA3_SRC_X_MODIFY +#define bfin_write_MDMA_S3_Y_COUNT bfin_write_MDMA3_SRC_Y_COUNT +#define bfin_write_MDMA_S3_Y_MODIFY bfin_write_MDMA3_SRC_Y_MODIFY +#define bfin_read_MDMA_D3_CONFIG bfin_read_MDMA3_DEST_CONFIG +#define bfin_write_MDMA_D3_CONFIG bfin_write_MDMA3_DEST_CONFIG +#define bfin_read_MDMA_D3_IRQ_STATUS bfin_read_MDMA3_DEST_IRQ_STATUS +#define bfin_write_MDMA_D3_IRQ_STATUS bfin_write_MDMA3_DEST_IRQ_STATUS +#define bfin_write_MDMA_D3_START_ADDR bfin_write_MDMA3_DEST_START_ADDR +#define bfin_write_MDMA_D3_X_COUNT bfin_write_MDMA3_DEST_X_COUNT +#define bfin_write_MDMA_D3_X_MODIFY bfin_write_MDMA3_DEST_X_MODIFY +#define bfin_write_MDMA_D3_Y_COUNT bfin_write_MDMA3_DEST_Y_COUNT +#define bfin_write_MDMA_D3_Y_MODIFY bfin_write_MDMA3_DEST_Y_MODIFY + +#define MDMA_S0_NEXT_DESC_PTR MDMA0_SRC_CRC0_NEXT_DESC_PTR +#define MDMA_D0_NEXT_DESC_PTR MDMA0_DEST_CRC0_NEXT_DESC_PTR +#define MDMA_S1_NEXT_DESC_PTR MDMA1_SRC_CRC1_NEXT_DESC_PTR +#define MDMA_D1_NEXT_DESC_PTR MDMA1_DEST_CRC1_NEXT_DESC_PTR + +#endif diff --git a/arch/blackfin/mach-bf609/include/mach/gpio.h b/arch/blackfin/mach-bf609/include/mach/gpio.h new file mode 100644 index 00000000000..07182513e79 --- /dev/null +++ b/arch/blackfin/mach-bf609/include/mach/gpio.h @@ -0,0 +1,165 @@ +/* + * Copyright 2007-2009 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +#ifndef _MACH_GPIO_H_ +#define _MACH_GPIO_H_ + +#define MAX_BLACKFIN_GPIOS 112 + +#define GPIO_PA0 0 +#define GPIO_PA1 1 +#define GPIO_PA2 2 +#define GPIO_PA3 3 +#define GPIO_PA4 4 +#define GPIO_PA5 5 +#define GPIO_PA6 6 +#define GPIO_PA7 7 +#define GPIO_PA8 8 +#define GPIO_PA9 9 +#define GPIO_PA10 10 +#define GPIO_PA11 11 +#define GPIO_PA12 12 +#define GPIO_PA13 13 +#define GPIO_PA14 14 +#define GPIO_PA15 15 +#define GPIO_PB0 16 +#define GPIO_PB1 17 +#define GPIO_PB2 18 +#define GPIO_PB3 19 +#define GPIO_PB4 20 +#define GPIO_PB5 21 +#define GPIO_PB6 22 +#define GPIO_PB7 23 +#define GPIO_PB8 24 +#define GPIO_PB9 25 +#define GPIO_PB10 26 +#define GPIO_PB11 27 +#define GPIO_PB12 28 +#define GPIO_PB13 29 +#define GPIO_PB14 30 +#define GPIO_PB15 31 +#define GPIO_PC0 32 +#define GPIO_PC1 33 +#define GPIO_PC2 34 +#define GPIO_PC3 35 +#define GPIO_PC4 36 +#define GPIO_PC5 37 +#define GPIO_PC6 38 +#define GPIO_PC7 39 +#define GPIO_PC8 40 +#define GPIO_PC9 41 +#define GPIO_PC10 42 +#define GPIO_PC11 43 +#define GPIO_PC12 44 +#define GPIO_PC13 45 +#define GPIO_PC14 46 +#define GPIO_PC15 47 +#define GPIO_PD0 48 +#define GPIO_PD1 49 +#define GPIO_PD2 50 +#define GPIO_PD3 51 +#define GPIO_PD4 52 +#define GPIO_PD5 53 +#define GPIO_PD6 54 +#define GPIO_PD7 55 +#define GPIO_PD8 56 +#define GPIO_PD9 57 +#define GPIO_PD10 58 +#define GPIO_PD11 59 +#define GPIO_PD12 60 +#define GPIO_PD13 61 +#define GPIO_PD14 62 +#define GPIO_PD15 63 +#define GPIO_PE0 64 +#define GPIO_PE1 65 +#define GPIO_PE2 66 +#define GPIO_PE3 67 +#define GPIO_PE4 68 +#define GPIO_PE5 69 +#define GPIO_PE6 70 +#define GPIO_PE7 71 +#define GPIO_PE8 72 +#define GPIO_PE9 73 +#define GPIO_PE10 74 +#define GPIO_PE11 75 +#define GPIO_PE12 76 +#define GPIO_PE13 77 +#define GPIO_PE14 78 +#define GPIO_PE15 79 +#define GPIO_PF0 80 +#define GPIO_PF1 81 +#define GPIO_PF2 82 +#define GPIO_PF3 83 +#define GPIO_PF4 84 +#define GPIO_PF5 85 +#define GPIO_PF6 86 +#define GPIO_PF7 87 +#define GPIO_PF8 88 +#define GPIO_PF9 89 +#define GPIO_PF10 90 +#define GPIO_PF11 91 +#define GPIO_PF12 92 +#define GPIO_PF13 93 +#define GPIO_PF14 94 +#define GPIO_PF15 95 +#define GPIO_PG0 96 +#define GPIO_PG1 97 +#define GPIO_PG2 98 +#define GPIO_PG3 99 +#define GPIO_PG4 100 +#define GPIO_PG5 101 +#define GPIO_PG6 102 +#define GPIO_PG7 103 +#define GPIO_PG8 104 +#define GPIO_PG9 105 +#define GPIO_PG10 106 +#define GPIO_PG11 107 +#define GPIO_PG12 108 +#define GPIO_PG13 109 +#define GPIO_PG14 110 +#define GPIO_PG15 111 + + +#define BFIN_GPIO_PINT 1 +#define NR_PINT_SYS_IRQS 6 +#define NR_PINTS 112 + + +#ifndef __ASSEMBLY__ + +struct gpio_port_t { + unsigned long port_fer; + unsigned long port_fer_set; + unsigned long port_fer_clear; + unsigned long data; + unsigned long data_set; + unsigned long data_clear; + unsigned long dir; + unsigned long dir_set; + unsigned long dir_clear; + unsigned long inen; + unsigned long inen_set; + unsigned long inen_clear; + unsigned long port_mux; + unsigned long toggle; + unsigned long polar; + unsigned long polar_set; + unsigned long polar_clear; + unsigned long lock; + unsigned long spare; + unsigned long revid; +}; + +#endif + +#include <mach-common/ports-a.h> +#include <mach-common/ports-b.h> +#include <mach-common/ports-c.h> +#include <mach-common/ports-d.h> +#include <mach-common/ports-e.h> +#include <mach-common/ports-f.h> +#include <mach-common/ports-g.h> + +#endif /* _MACH_GPIO_H_ */ diff --git a/arch/blackfin/mach-bf609/include/mach/irq.h b/arch/blackfin/mach-bf609/include/mach/irq.h new file mode 100644 index 00000000000..d1cb6a86f80 --- /dev/null +++ b/arch/blackfin/mach-bf609/include/mach/irq.h @@ -0,0 +1,319 @@ +/* + * Copyright 2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _BF60x_IRQ_H_ +#define _BF60x_IRQ_H_ + +#include <mach-common/irq.h> + +#define NR_PERI_INTS (5 * 32) + +#define IRQ_SEC_ERR BFIN_IRQ(0) /* SEC Error */ +#define IRQ_CGU_EVT BFIN_IRQ(1) /* CGU Event */ +#define IRQ_WATCH0 BFIN_IRQ(2) /* Watchdog0 Interrupt */ +#define IRQ_WATCH1 BFIN_IRQ(3) /* Watchdog1 Interrupt */ +#define IRQ_L2CTL0_ECC_ERR BFIN_IRQ(4) /* L2 ECC Error */ +#define IRQ_L2CTL0_ECC_WARN BFIN_IRQ(5) /* L2 ECC Waring */ +#define IRQ_C0_DBL_FAULT BFIN_IRQ(6) /* Core 0 Double Fault */ +#define IRQ_C1_DBL_FAULT BFIN_IRQ(7) /* Core 1 Double Fault */ +#define IRQ_C0_HW_ERR BFIN_IRQ(8) /* Core 0 Hardware Error */ +#define IRQ_C1_HW_ERR BFIN_IRQ(9) /* Core 1 Hardware Error */ +#define IRQ_C0_NMI_L1_PARITY_ERR BFIN_IRQ(10) /* Core 0 Unhandled NMI or L1 Memory Parity Error */ +#define IRQ_C1_NMI_L1_PARITY_ERR BFIN_IRQ(11) /* Core 1 Unhandled NMI or L1 Memory Parity Error */ +#define CORE_IRQS (IRQ_C1_NMI_L1_PARITY_ERR + 1) + +#define IRQ_TIMER0 BFIN_IRQ(12) /* Timer 0 Interrupt */ +#define IRQ_TIMER1 BFIN_IRQ(13) /* Timer 1 Interrupt */ +#define IRQ_TIMER2 BFIN_IRQ(14) /* Timer 2 Interrupt */ +#define IRQ_TIMER3 BFIN_IRQ(15) /* Timer 3 Interrupt */ +#define IRQ_TIMER4 BFIN_IRQ(16) /* Timer 4 Interrupt */ +#define IRQ_TIMER5 BFIN_IRQ(17) /* Timer 5 Interrupt */ +#define IRQ_TIMER6 BFIN_IRQ(18) /* Timer 6 Interrupt */ +#define IRQ_TIMER7 BFIN_IRQ(19) /* Timer 7 Interrupt */ +#define IRQ_TIMER_STAT BFIN_IRQ(20) /* Timer Block Status */ +#define IRQ_PINT0 BFIN_IRQ(21) /* PINT0 Interrupt */ +#define IRQ_PINT1 BFIN_IRQ(22) /* PINT1 Interrupt */ +#define IRQ_PINT2 BFIN_IRQ(23) /* PINT2 Interrupt */ +#define IRQ_PINT3 BFIN_IRQ(24) /* PINT3 Interrupt */ +#define IRQ_PINT4 BFIN_IRQ(25) /* PINT4 Interrupt */ +#define IRQ_PINT5 BFIN_IRQ(26) /* PINT5 Interrupt */ +#define IRQ_CNT BFIN_IRQ(27) /* CNT Interrupt */ +#define IRQ_PWM0_TRIP BFIN_IRQ(28) /* PWM0 Trip Interrupt */ +#define IRQ_PWM0_SYNC BFIN_IRQ(29) /* PWM0 Sync Interrupt */ +#define IRQ_PWM1_TRIP BFIN_IRQ(30) /* PWM1 Trip Interrupt */ +#define IRQ_PWM1_SYNC BFIN_IRQ(31) /* PWM1 Sync Interrupt */ +#define IRQ_TWI0 BFIN_IRQ(32) /* TWI0 Interrupt */ +#define IRQ_TWI1 BFIN_IRQ(33) /* TWI1 Interrupt */ +#define IRQ_SOFT0 BFIN_IRQ(34) /* Software-Driven Interrupt 0 */ +#define IRQ_SOFT1 BFIN_IRQ(35) /* Software-Driven Interrupt 1 */ +#define IRQ_SOFT2 BFIN_IRQ(36) /* Software-Driven Interrupt 2 */ +#define IRQ_SOFT3 BFIN_IRQ(37) /* Software-Driven Interrupt 3 */ +#define IRQ_ACM_EVT_MISS BFIN_IRQ(38) /* ACM Event Miss */ +#define IRQ_ACM_EVT_COMPLETE BFIN_IRQ(39) /* ACM Event Complete */ +#define IRQ_CAN0_RX BFIN_IRQ(40) /* CAN0 Receive Interrupt */ +#define IRQ_CAN0_TX BFIN_IRQ(41) /* CAN0 Transmit Interrupt */ +#define IRQ_CAN0_STAT BFIN_IRQ(42) /* CAN0 Status */ +#define IRQ_SPORT0_TX BFIN_IRQ(43) /* SPORT0 TX Interrupt (DMA0) */ +#define IRQ_SPORT0_TX_STAT BFIN_IRQ(44) /* SPORT0 TX Status Interrupt */ +#define IRQ_SPORT0_RX BFIN_IRQ(45) /* SPORT0 RX Interrupt (DMA1) */ +#define IRQ_SPORT0_RX_STAT BFIN_IRQ(46) /* SPORT0 RX Status Interrupt */ +#define IRQ_SPORT1_TX BFIN_IRQ(47) /* SPORT1 TX Interrupt (DMA2) */ +#define IRQ_SPORT1_TX_STAT BFIN_IRQ(48) /* SPORT1 TX Status Interrupt */ +#define IRQ_SPORT1_RX BFIN_IRQ(49) /* SPORT1 RX Interrupt (DMA3) */ +#define IRQ_SPORT1_RX_STAT BFIN_IRQ(50) /* SPORT1 RX Status Interrupt */ +#define IRQ_SPORT2_TX BFIN_IRQ(51) /* SPORT2 TX Interrupt (DMA4) */ +#define IRQ_SPORT2_TX_STAT BFIN_IRQ(52) /* SPORT2 TX Status Interrupt */ +#define IRQ_SPORT2_RX BFIN_IRQ(53) /* SPORT2 RX Interrupt (DMA5) */ +#define IRQ_SPORT2_RX_STAT BFIN_IRQ(54) /* SPORT2 RX Status Interrupt */ +#define IRQ_SPI0_TX BFIN_IRQ(55) /* SPI0 TX Interrupt (DMA6) */ +#define IRQ_SPI0_RX BFIN_IRQ(56) /* SPI0 RX Interrupt (DMA7) */ +#define IRQ_SPI0_STAT BFIN_IRQ(57) /* SPI0 Status Interrupt */ +#define IRQ_SPI1_TX BFIN_IRQ(58) /* SPI1 TX Interrupt (DMA8) */ +#define IRQ_SPI1_RX BFIN_IRQ(59) /* SPI1 RX Interrupt (DMA9) */ +#define IRQ_SPI1_STAT BFIN_IRQ(60) /* SPI1 Status Interrupt */ +#define IRQ_RSI BFIN_IRQ(61) /* RSI (DMA10) Interrupt */ +#define IRQ_RSI_INT0 BFIN_IRQ(62) /* RSI Interrupt0 */ +#define IRQ_RSI_INT1 BFIN_IRQ(63) /* RSI Interrupt1 */ +#define IRQ_SDU BFIN_IRQ(64) /* DMA11 Data (SDU) */ +/* -- RESERVED -- 65 DMA12 Data (Reserved) */ +/* -- RESERVED -- 66 Reserved */ +/* -- RESERVED -- 67 Reserved */ +#define IRQ_EMAC0_STAT BFIN_IRQ(68) /* EMAC0 Status */ +/* -- RESERVED -- 69 EMAC0 Power (Reserved) */ +#define IRQ_EMAC1_STAT BFIN_IRQ(70) /* EMAC1 Status */ +/* -- RESERVED -- 71 EMAC1 Power (Reserved) */ +#define IRQ_LP0 BFIN_IRQ(72) /* DMA13 Data (Link Port 0) */ +#define IRQ_LP0_STAT BFIN_IRQ(73) /* Link Port 0 Status */ +#define IRQ_LP1 BFIN_IRQ(74) /* DMA14 Data (Link Port 1) */ +#define IRQ_LP1_STAT BFIN_IRQ(75) /* Link Port 1 Status */ +#define IRQ_LP2 BFIN_IRQ(76) /* DMA15 Data (Link Port 2) */ +#define IRQ_LP2_STAT BFIN_IRQ(77) /* Link Port 2 Status */ +#define IRQ_LP3 BFIN_IRQ(78) /* DMA16 Data(Link Port 3) */ +#define IRQ_LP3_STAT BFIN_IRQ(79) /* Link Port 3 Status */ +#define IRQ_UART0_TX BFIN_IRQ(80) /* UART0 TX Interrupt (DMA17) */ +#define IRQ_UART0_RX BFIN_IRQ(81) /* UART0 RX Interrupt (DMA18) */ +#define IRQ_UART0_STAT BFIN_IRQ(82) /* UART0 Status(Error) Interrupt */ +#define IRQ_UART1_TX BFIN_IRQ(83) /* UART1 TX Interrupt (DMA19) */ +#define IRQ_UART1_RX BFIN_IRQ(84) /* UART1 RX Interrupt (DMA20) */ +#define IRQ_UART1_STAT BFIN_IRQ(85) /* UART1 Status(Error) Interrupt */ +#define IRQ_MDMA0_SRC_CRC0 BFIN_IRQ(86) /* DMA21 Data (MDMA Stream 0 Source/CRC0 Input Channel) */ +#define IRQ_MDMA0_DEST_CRC0 BFIN_IRQ(87) /* DMA22 Data (MDMA Stream 0 Destination/CRC0 Output Channel) */ +#define IRQ_MDMAS0 IRQ_MDMA0_DEST_CRC0 +#define IRQ_CRC0_DCNTEXP BFIN_IRQ(88) /* CRC0 DATACOUNT Expiration */ +#define IRQ_CRC0_ERR BFIN_IRQ(89) /* CRC0 Error */ +#define IRQ_MDMA1_SRC_CRC1 BFIN_IRQ(90) /* DMA23 Data (MDMA Stream 1 Source/CRC1 Input Channel) */ +#define IRQ_MDMA1_DEST_CRC1 BFIN_IRQ(91) /* DMA24 Data (MDMA Stream 1 Destination/CRC1 Output Channel) */ +#define IRQ_MDMAS1 IRQ_MDMA1_DEST_CRC1 +#define IRQ_CRC1_DCNTEXP BFIN_IRQ(92) /* CRC1 DATACOUNT Expiration */ +#define IRQ_CRC1_ERR BFIN_IRQ(93) /* CRC1 Error */ +#define IRQ_MDMA2_SRC BFIN_IRQ(94) /* DMA25 Data (MDMA Stream 2 Source Channel) */ +#define IRQ_MDMA2_DEST BFIN_IRQ(95) /* DMA26 Data (MDMA Stream 2 Destination Channel) */ +#define IRQ_MDMAS2 IRQ_MDMA2_DEST +#define IRQ_MDMA3_SRC BFIN_IRQ(96) /* DMA27 Data (MDMA Stream 3 Source Channel) */ +#define IRQ_MDMA3_DEST BFIN_IRQ(97) /* DMA28 Data (MDMA Stream 3 Destination Channel) */ +#define IRQ_MDMAS3 IRQ_MDMA3_DEST +#define IRQ_EPPI0_CH0 BFIN_IRQ(98) /* DMA29 Data (EPPI0 Channel 0) */ +#define IRQ_EPPI0_CH1 BFIN_IRQ(99) /* DMA30 Data (EPPI0 Channel 1) */ +#define IRQ_EPPI0_STAT BFIN_IRQ(100) /* EPPI0 Status */ +#define IRQ_EPPI2_CH0 BFIN_IRQ(101) /* DMA31 Data (EPPI2 Channel 0) */ +#define IRQ_EPPI2_CH1 BFIN_IRQ(102) /* DMA32 Data (EPPI2 Channel 1) */ +#define IRQ_EPPI2_STAT BFIN_IRQ(103) /* EPPI2 Status */ +#define IRQ_EPPI1_CH0 BFIN_IRQ(104) /* DMA33 Data (EPPI1 Channel 0) */ +#define IRQ_EPPI1_CH1 BFIN_IRQ(105) /* DMA34 Data (EPPI1 Channel 1) */ +#define IRQ_EPPI1_STAT BFIN_IRQ(106) /* EPPI1 Status */ +#define IRQ_PIXC_CH0 BFIN_IRQ(107) /* DMA35 Data (PIXC Channel 0) */ +#define IRQ_PIXC_CH1 BFIN_IRQ(108) /* DMA36 Data (PIXC Channel 1) */ +#define IRQ_PIXC_CH2 BFIN_IRQ(109) /* DMA37 Data (PIXC Channel 2) */ +#define IRQ_PIXC_STAT BFIN_IRQ(110) /* PIXC Status */ +#define IRQ_PVP_CPDOB BFIN_IRQ(111) /* DMA38 Data (PVP0 Camera Pipe Data Out B) */ +#define IRQ_PVP_CPDOC BFIN_IRQ(112) /* DMA39 Data (PVP0 Camera Pipe Data Out C) */ +#define IRQ_PVP_CPSTAT BFIN_IRQ(113) /* DMA40 Data (PVP0 Camera Pipe Status Out) */ +#define IRQ_PVP_CPCI BFIN_IRQ(114) /* DMA41 Data (PVP0 Camera Pipe Control In) */ +#define IRQ_PVP_STAT0 BFIN_IRQ(115) /* PVP0 Status 0 */ +#define IRQ_PVP_MPDO BFIN_IRQ(116) /* DMA42 Data (PVP0 Memory Pipe Data Out) */ +#define IRQ_PVP_MPDI BFIN_IRQ(117) /* DMA43 Data (PVP0 Memory Pipe Data In) */ +#define IRQ_PVP_MPSTAT BFIN_IRQ(118) /* DMA44 Data (PVP0 Memory Pipe Status Out) */ +#define IRQ_PVP_MPCI BFIN_IRQ(119) /* DMA45 Data (PVP0 Memory Pipe Control In) */ +#define IRQ_PVP_CPDOA BFIN_IRQ(120) /* DMA46 Data (PVP0 Camera Pipe Data Out A) */ +#define IRQ_PVP_STAT1 BFIN_IRQ(121) /* PVP0 Status 1 */ +#define IRQ_USB_STAT BFIN_IRQ(122) /* USB Status Interrupt */ +#define IRQ_USB_DMA BFIN_IRQ(123) /* USB DMA Interrupt */ +#define IRQ_TRU_INT0 BFIN_IRQ(124) /* TRU0 Interrupt 0 */ +#define IRQ_TRU_INT1 BFIN_IRQ(125) /* TRU0 Interrupt 1 */ +#define IRQ_TRU_INT2 BFIN_IRQ(126) /* TRU0 Interrupt 2 */ +#define IRQ_TRU_INT3 BFIN_IRQ(127) /* TRU0 Interrupt 3 */ +#define IRQ_DMAC0_ERROR BFIN_IRQ(128) /* DMAC0 Status Interrupt */ +#define IRQ_CGU0_ERROR BFIN_IRQ(129) /* CGU0 Error */ +/* -- RESERVED -- 130 Reserved */ +#define IRQ_DPM BFIN_IRQ(131) /* DPM0 Event */ +/* -- RESERVED -- 132 Reserved */ +#define IRQ_SWU0 BFIN_IRQ(133) /* SWU0 */ +#define IRQ_SWU1 BFIN_IRQ(134) /* SWU1 */ +#define IRQ_SWU2 BFIN_IRQ(135) /* SWU2 */ +#define IRQ_SWU3 BFIN_IRQ(136) /* SWU3 */ +#define IRQ_SWU4 BFIN_IRQ(137) /* SWU4 */ +#define IRQ_SWU5 BFIN_IRQ(138) /* SWU5 */ +#define IRQ_SWU6 BFIN_IRQ(139) /* SWU6 */ + +#define SYS_IRQS IRQ_SWU6 + +#define BFIN_PA_IRQ(x) ((x) + SYS_IRQS + 1) +#define IRQ_PA0 BFIN_PA_IRQ(0) +#define IRQ_PA1 BFIN_PA_IRQ(1) +#define IRQ_PA2 BFIN_PA_IRQ(2) +#define IRQ_PA3 BFIN_PA_IRQ(3) +#define IRQ_PA4 BFIN_PA_IRQ(4) +#define IRQ_PA5 BFIN_PA_IRQ(5) +#define IRQ_PA6 BFIN_PA_IRQ(6) +#define IRQ_PA7 BFIN_PA_IRQ(7) +#define IRQ_PA8 BFIN_PA_IRQ(8) +#define IRQ_PA9 BFIN_PA_IRQ(9) +#define IRQ_PA10 BFIN_PA_IRQ(10) +#define IRQ_PA11 BFIN_PA_IRQ(11) +#define IRQ_PA12 BFIN_PA_IRQ(12) +#define IRQ_PA13 BFIN_PA_IRQ(13) +#define IRQ_PA14 BFIN_PA_IRQ(14) +#define IRQ_PA15 BFIN_PA_IRQ(15) + +#define BFIN_PB_IRQ(x) ((x) + IRQ_PA15 + 1) +#define IRQ_PB0 BFIN_PB_IRQ(0) +#define IRQ_PB1 BFIN_PB_IRQ(1) +#define IRQ_PB2 BFIN_PB_IRQ(2) +#define IRQ_PB3 BFIN_PB_IRQ(3) +#define IRQ_PB4 BFIN_PB_IRQ(4) +#define IRQ_PB5 BFIN_PB_IRQ(5) +#define IRQ_PB6 BFIN_PB_IRQ(6) +#define IRQ_PB7 BFIN_PB_IRQ(7) +#define IRQ_PB8 BFIN_PB_IRQ(8) +#define IRQ_PB9 BFIN_PB_IRQ(9) +#define IRQ_PB10 BFIN_PB_IRQ(10) +#define IRQ_PB11 BFIN_PB_IRQ(11) +#define IRQ_PB12 BFIN_PB_IRQ(12) +#define IRQ_PB13 BFIN_PB_IRQ(13) +#define IRQ_PB14 BFIN_PB_IRQ(14) +#define IRQ_PB15 BFIN_PB_IRQ(15) /* N/A */ + +#define BFIN_PC_IRQ(x) ((x) + IRQ_PB15 + 1) +#define IRQ_PC0 BFIN_PC_IRQ(0) +#define IRQ_PC1 BFIN_PC_IRQ(1) +#define IRQ_PC2 BFIN_PC_IRQ(2) +#define IRQ_PC3 BFIN_PC_IRQ(3) +#define IRQ_PC4 BFIN_PC_IRQ(4) +#define IRQ_PC5 BFIN_PC_IRQ(5) +#define IRQ_PC6 BFIN_PC_IRQ(6) +#define IRQ_PC7 BFIN_PC_IRQ(7) +#define IRQ_PC8 BFIN_PC_IRQ(8) +#define IRQ_PC9 BFIN_PC_IRQ(9) +#define IRQ_PC10 BFIN_PC_IRQ(10) +#define IRQ_PC11 BFIN_PC_IRQ(11) +#define IRQ_PC12 BFIN_PC_IRQ(12) +#define IRQ_PC13 BFIN_PC_IRQ(13) +#define IRQ_PC14 BFIN_PC_IRQ(14) /* N/A */ +#define IRQ_PC15 BFIN_PC_IRQ(15) /* N/A */ + +#define BFIN_PD_IRQ(x) ((x) + IRQ_PC15 + 1) +#define IRQ_PD0 BFIN_PD_IRQ(0) +#define IRQ_PD1 BFIN_PD_IRQ(1) +#define IRQ_PD2 BFIN_PD_IRQ(2) +#define IRQ_PD3 BFIN_PD_IRQ(3) +#define IRQ_PD4 BFIN_PD_IRQ(4) +#define IRQ_PD5 BFIN_PD_IRQ(5) +#define IRQ_PD6 BFIN_PD_IRQ(6) +#define IRQ_PD7 BFIN_PD_IRQ(7) +#define IRQ_PD8 BFIN_PD_IRQ(8) +#define IRQ_PD9 BFIN_PD_IRQ(9) +#define IRQ_PD10 BFIN_PD_IRQ(10) +#define IRQ_PD11 BFIN_PD_IRQ(11) +#define IRQ_PD12 BFIN_PD_IRQ(12) +#define IRQ_PD13 BFIN_PD_IRQ(13) +#define IRQ_PD14 BFIN_PD_IRQ(14) +#define IRQ_PD15 BFIN_PD_IRQ(15) + +#define BFIN_PE_IRQ(x) ((x) + IRQ_PD15 + 1) +#define IRQ_PE0 BFIN_PE_IRQ(0) +#define IRQ_PE1 BFIN_PE_IRQ(1) +#define IRQ_PE2 BFIN_PE_IRQ(2) +#define IRQ_PE3 BFIN_PE_IRQ(3) +#define IRQ_PE4 BFIN_PE_IRQ(4) +#define IRQ_PE5 BFIN_PE_IRQ(5) +#define IRQ_PE6 BFIN_PE_IRQ(6) +#define IRQ_PE7 BFIN_PE_IRQ(7) +#define IRQ_PE8 BFIN_PE_IRQ(8) +#define IRQ_PE9 BFIN_PE_IRQ(9) +#define IRQ_PE10 BFIN_PE_IRQ(10) +#define IRQ_PE11 BFIN_PE_IRQ(11) +#define IRQ_PE12 BFIN_PE_IRQ(12) +#define IRQ_PE13 BFIN_PE_IRQ(13) +#define IRQ_PE14 BFIN_PE_IRQ(14) +#define IRQ_PE15 BFIN_PE_IRQ(15) + +#define BFIN_PF_IRQ(x) ((x) + IRQ_PE15 + 1) +#define IRQ_PF0 BFIN_PF_IRQ(0) +#define IRQ_PF1 BFIN_PF_IRQ(1) +#define IRQ_PF2 BFIN_PF_IRQ(2) +#define IRQ_PF3 BFIN_PF_IRQ(3) +#define IRQ_PF4 BFIN_PF_IRQ(4) +#define IRQ_PF5 BFIN_PF_IRQ(5) +#define IRQ_PF6 BFIN_PF_IRQ(6) +#define IRQ_PF7 BFIN_PF_IRQ(7) +#define IRQ_PF8 BFIN_PF_IRQ(8) +#define IRQ_PF9 BFIN_PF_IRQ(9) +#define IRQ_PF10 BFIN_PF_IRQ(10) +#define IRQ_PF11 BFIN_PF_IRQ(11) +#define IRQ_PF12 BFIN_PF_IRQ(12) +#define IRQ_PF13 BFIN_PF_IRQ(13) +#define IRQ_PF14 BFIN_PF_IRQ(14) +#define IRQ_PF15 BFIN_PF_IRQ(15) + +#define BFIN_PG_IRQ(x) ((x) + IRQ_PF15 + 1) +#define IRQ_PG0 BFIN_PG_IRQ(0) +#define IRQ_PG1 BFIN_PG_IRQ(1) +#define IRQ_PG2 BFIN_PG_IRQ(2) +#define IRQ_PG3 BFIN_PG_IRQ(3) +#define IRQ_PG4 BFIN_PG_IRQ(4) +#define IRQ_PG5 BFIN_PG_IRQ(5) +#define IRQ_PG6 BFIN_PG_IRQ(6) +#define IRQ_PG7 BFIN_PG_IRQ(7) +#define IRQ_PG8 BFIN_PG_IRQ(8) +#define IRQ_PG9 BFIN_PG_IRQ(9) +#define IRQ_PG10 BFIN_PG_IRQ(10) +#define IRQ_PG11 BFIN_PG_IRQ(11) +#define IRQ_PG12 BFIN_PG_IRQ(12) +#define IRQ_PG13 BFIN_PG_IRQ(13) +#define IRQ_PG14 BFIN_PG_IRQ(14) +#define IRQ_PG15 BFIN_PG_IRQ(15) + +#define GPIO_IRQ_BASE IRQ_PA0 + +#define NR_MACH_IRQS (IRQ_PG15 + 1) + +#define SEC_SCTL_PRIO_OFFSET 8 + +#ifndef __ASSEMBLY__ +#include <linux/types.h> + +extern u8 sec_int_priority[]; + +/* + * gpio pint registers layout + */ +struct bfin_pint_regs { + u32 mask_set; + u32 mask_clear; + u32 request; + u32 assign; + u32 edge_set; + u32 edge_clear; + u32 invert_set; + u32 invert_clear; + u32 pinstate; + u32 latch; + u32 __pad0[2]; +}; + +#endif + +#endif diff --git a/arch/blackfin/mach-bf609/include/mach/mem_map.h b/arch/blackfin/mach-bf609/include/mach/mem_map.h new file mode 100644 index 00000000000..20b65bfc531 --- /dev/null +++ b/arch/blackfin/mach-bf609/include/mach/mem_map.h @@ -0,0 +1,86 @@ +/* + * BF60x memory map + * + * Copyright 2011 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +#ifndef __BFIN_MACH_MEM_MAP_H__ +#define __BFIN_MACH_MEM_MAP_H__ + +#ifndef __BFIN_MEM_MAP_H__ +# error "do not include mach/mem_map.h directly -- use asm/mem_map.h" +#endif + +/* Async Memory Banks */ +#define ASYNC_BANK3_BASE 0xBC000000 /* Async Bank 3 */ +#define ASYNC_BANK3_SIZE 0x04000000 /* 64M */ +#define ASYNC_BANK2_BASE 0xB8000000 /* Async Bank 2 */ +#define ASYNC_BANK2_SIZE 0x04000000 /* 64M */ +#define ASYNC_BANK1_BASE 0xB4000000 /* Async Bank 1 */ +#define ASYNC_BANK1_SIZE 0x04000000 /* 64M */ +#define ASYNC_BANK0_BASE 0xB0000000 /* Async Bank 0 */ +#define ASYNC_BANK0_SIZE 0x04000000 /* 64M */ + +/* Boot ROM Memory */ + +#define BOOT_ROM_START 0xC8000000 +#define BOOT_ROM_LENGTH 0x8000 + +/* Level 1 Memory */ + +/* Memory Map for ADSP-BF60x processors */ +#ifdef CONFIG_BFIN_ICACHE +#define BFIN_ICACHESIZE (16*1024) +#define L1_CODE_LENGTH 0x10000 +#else +#define BFIN_ICACHESIZE (0*1024) +#define L1_CODE_LENGTH 0x14000 +#endif + +#define L1_CODE_START 0xFFA00000 +#define L1_DATA_A_START 0xFF800000 +#define L1_DATA_B_START 0xFF900000 + + +#define COREA_L1_SCRATCH_START 0xFFB00000 +#define COREB_L1_SCRATCH_START 0xFF700000 + +#define COREB_L1_CODE_START 0xFF600000 +#define COREB_L1_DATA_A_START 0xFF400000 +#define COREB_L1_DATA_B_START 0xFF500000 + +#define COREB_L1_CODE_LENGTH 0x14000 +#define COREB_L1_DATA_A_LENGTH 0x8000 +#define COREB_L1_DATA_B_LENGTH 0x8000 + + +#ifdef CONFIG_BFIN_DCACHE + +#ifdef CONFIG_BFIN_DCACHE_BANKA +#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x8000 - 0x4000) +#define L1_DATA_B_LENGTH 0x8000 +#define BFIN_DCACHESIZE (16*1024) +#define BFIN_DSUPBANKS 1 +#else +#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x8000 - 0x4000) +#define L1_DATA_B_LENGTH (0x8000 - 0x4000) +#define BFIN_DCACHESIZE (32*1024) +#define BFIN_DSUPBANKS 2 +#endif + +#else +#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH 0x8000 +#define L1_DATA_B_LENGTH 0x8000 +#define BFIN_DCACHESIZE (0*1024) +#define BFIN_DSUPBANKS 0 +#endif /*CONFIG_BFIN_DCACHE*/ + +/* Level 2 Memory */ +#define L2_START 0xC8080000 +#define L2_LENGTH 0x40000 + +#endif diff --git a/arch/blackfin/mach-bf609/include/mach/pll.h b/arch/blackfin/mach-bf609/include/mach/pll.h new file mode 100644 index 00000000000..1857a4a0f26 --- /dev/null +++ b/arch/blackfin/mach-bf609/include/mach/pll.h @@ -0,0 +1 @@ +/* #include <mach-common/pll.h> */ diff --git a/arch/blackfin/mach-bf609/include/mach/pm.h b/arch/blackfin/mach-bf609/include/mach/pm.h new file mode 100644 index 00000000000..a1efd936dd3 --- /dev/null +++ b/arch/blackfin/mach-bf609/include/mach/pm.h @@ -0,0 +1,25 @@ +/* + * Blackfin bf609 power management + * + * Copyright 2011 Analog Devices Inc. + * + * Licensed under the GPL-2 + */ + +#ifndef __MACH_BF609_PM_H__ +#define __MACH_BF609_PM_H__ + +#include <linux/suspend.h> +#include <linux/platform_device.h> + +extern int bfin609_pm_enter(suspend_state_t state); +extern int bf609_pm_prepare(void); +extern void bf609_pm_finish(void); + +void bf609_hibernate(void); +void bfin_sec_raise_irq(unsigned int sid); +void coreb_enable(void); + +int bf609_nor_flash_init(struct platform_device *pdev); +void bf609_nor_flash_exit(struct platform_device *pdev); +#endif diff --git a/arch/blackfin/mach-bf609/include/mach/portmux.h b/arch/blackfin/mach-bf609/include/mach/portmux.h new file mode 100644 index 00000000000..c48bb71a55c --- /dev/null +++ b/arch/blackfin/mach-bf609/include/mach/portmux.h @@ -0,0 +1,349 @@ +/* + * Copyright 2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later + */ + +#ifndef _MACH_PORTMUX_H_ +#define _MACH_PORTMUX_H_ + +/* EMAC RMII Port Mux */ +#define P_MII0_MDC (P_DEFINED | P_IDENT(GPIO_PC6) | P_FUNCT(0)) +#define P_MII0_MDIO (P_DEFINED | P_IDENT(GPIO_PC7) | P_FUNCT(0)) +#define P_MII0_ETxD0 (P_DEFINED | P_IDENT(GPIO_PC2) | P_FUNCT(0)) +#define P_MII0_ERxD0 (P_DEFINED | P_IDENT(GPIO_PC0) | P_FUNCT(0)) +#define P_MII0_ETxD1 (P_DEFINED | P_IDENT(GPIO_PC3) | P_FUNCT(0)) +#define P_MII0_ERxD1 (P_DEFINED | P_IDENT(GPIO_PC1) | P_FUNCT(0)) +#define P_MII0_ETxEN (P_DEFINED | P_IDENT(GPIO_PB13) | P_FUNCT(0)) +#define P_MII0_PHYINT (P_DEFINED | P_IDENT(GPIO_PD6) | P_FUNCT(0)) +#define P_MII0_CRS (P_DEFINED | P_IDENT(GPIO_PC5) | P_FUNCT(0)) +#define P_MII0_ERxER (P_DEFINED | P_IDENT(GPIO_PC4) | P_FUNCT(0)) +#define P_MII0_TxCLK (P_DEFINED | P_IDENT(GPIO_PB14) | P_FUNCT(0)) +#define P_MII0_PTPPPS (P_DEFINED | P_IDENT(GPIO_PB15) | P_FUNCT(0)) + +#define P_RMII0 {\ + P_MII0_ETxD0, \ + P_MII0_ETxD1, \ + P_MII0_ETxEN, \ + P_MII0_ERxD0, \ + P_MII0_ERxD1, \ + P_MII0_ERxER, \ + P_MII0_TxCLK, \ + P_MII0_PHYINT, \ + P_MII0_CRS, \ + P_MII0_PTPPPS, \ + P_MII0_MDC, \ + P_MII0_MDIO, 0} + +#define P_MII1_MDC (P_DEFINED | P_IDENT(GPIO_PE10) | P_FUNCT(0)) +#define P_MII1_MDIO (P_DEFINED | P_IDENT(GPIO_PE11) | P_FUNCT(0)) +#define P_MII1_ETxD0 (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(0)) +#define P_MII1_ERxD0 (P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0)) +#define P_MII1_ETxD1 (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(0)) +#define P_MII1_ERxD1 (P_DEFINED | P_IDENT(GPIO_PE15) | P_FUNCT(0)) +#define P_MII1_ETxEN (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(0)) +#define P_MII1_PHYINT (P_DEFINED | P_IDENT(GPIO_PE12) | P_FUNCT(0)) +#define P_MII1_CRS (P_DEFINED | P_IDENT(GPIO_PE13) | P_FUNCT(0)) +#define P_MII1_ERxER (P_DEFINED | P_IDENT(GPIO_PE14) | P_FUNCT(0)) +#define P_MII1_TxCLK (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(0)) +#define P_MII1_PTPPPS (P_DEFINED | P_IDENT(GPIO_PC9) | P_FUNCT(0)) + +#define P_RMII1 {\ + P_MII1_ETxD0, \ + P_MII1_ETxD1, \ + P_MII1_ETxEN, \ + P_MII1_ERxD0, \ + P_MII1_ERxD1, \ + P_MII1_ERxER, \ + P_MII1_TxCLK, \ + P_MII1_PHYINT, \ + P_MII1_CRS, \ + P_MII1_PTPPPS, \ + P_MII1_MDC, \ + P_MII1_MDIO, 0} + +/* PPI Port Mux */ +#define P_PPI0_D0 (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(1)) +#define P_PPI0_D1 (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(1)) +#define P_PPI0_D2 (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(1)) +#define P_PPI0_D3 (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(1)) +#define P_PPI0_D4 (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(1)) +#define P_PPI0_D5 (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(1)) +#define P_PPI0_D6 (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(1)) +#define P_PPI0_D7 (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(1)) +#define P_PPI0_D8 (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(1)) +#define P_PPI0_D9 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1)) +#define P_PPI0_D10 (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(1)) +#define P_PPI0_D11 (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(1)) +#define P_PPI0_D12 (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(1)) +#define P_PPI0_D13 (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(1)) +#define P_PPI0_D14 (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1)) +#define P_PPI0_D15 (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1)) +#define P_PPI0_D16 (P_DEFINED | P_IDENT(GPIO_PE3) | P_FUNCT(1)) +#define P_PPI0_D17 (P_DEFINED | P_IDENT(GPIO_PE4) | P_FUNCT(1)) +#define P_PPI0_D18 (P_DEFINED | P_IDENT(GPIO_PE0) | P_FUNCT(1)) +#define P_PPI0_D19 (P_DEFINED | P_IDENT(GPIO_PE1) | P_FUNCT(1)) +#define P_PPI0_D20 (P_DEFINED | P_IDENT(GPIO_PD12) | P_FUNCT(1)) +#define P_PPI0_D21 (P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(1)) +#define P_PPI0_D22 (P_DEFINED | P_IDENT(GPIO_PE2) | P_FUNCT(1)) +#define P_PPI0_D23 (P_DEFINED | P_IDENT(GPIO_PE5) | P_FUNCT(1)) +#define P_PPI0_CLK (P_DEFINED | P_IDENT(GPIO_PE9) | P_FUNCT(1)) +#define P_PPI0_FS1 (P_DEFINED | P_IDENT(GPIO_PE8) | P_FUNCT(1)) +#define P_PPI0_FS2 (P_DEFINED | P_IDENT(GPIO_PE7) | P_FUNCT(1)) +#define P_PPI0_FS3 (P_DEFINED | P_IDENT(GPIO_PE6) | P_FUNCT(1)) + +#define P_PPI1_D0 (P_DEFINED | P_IDENT(GPIO_PC0) | P_FUNCT(1)) +#define P_PPI1_D1 (P_DEFINED | P_IDENT(GPIO_PC1) | P_FUNCT(1)) +#define P_PPI1_D2 (P_DEFINED | P_IDENT(GPIO_PC2) | P_FUNCT(1)) +#define P_PPI1_D3 (P_DEFINED | P_IDENT(GPIO_PC3) | P_FUNCT(1)) +#define P_PPI1_D4 (P_DEFINED | P_IDENT(GPIO_PC4) | P_FUNCT(1)) +#define P_PPI1_D5 (P_DEFINED | P_IDENT(GPIO_PC5) | P_FUNCT(1)) +#define P_PPI1_D6 (P_DEFINED | P_IDENT(GPIO_PC6) | P_FUNCT(1)) +#define P_PPI1_D7 (P_DEFINED | P_IDENT(GPIO_PC7) | P_FUNCT(1)) +#define P_PPI1_D8 (P_DEFINED | P_IDENT(GPIO_PC8) | P_FUNCT(1)) +#define P_PPI1_D9 (P_DEFINED | P_IDENT(GPIO_PC9) | P_FUNCT(1)) +#define P_PPI1_D10 (P_DEFINED | P_IDENT(GPIO_PC10) | P_FUNCT(1)) +#define P_PPI1_D11 (P_DEFINED | P_IDENT(GPIO_PC11) | P_FUNCT(1)) +#define P_PPI1_D12 (P_DEFINED | P_IDENT(GPIO_PC12) | P_FUNCT(1)) +#define P_PPI1_D13 (P_DEFINED | P_IDENT(GPIO_PC13) | P_FUNCT(1)) +#define P_PPI1_D14 (P_DEFINED | P_IDENT(GPIO_PC14) | P_FUNCT(1)) +#define P_PPI1_D15 (P_DEFINED | P_IDENT(GPIO_PC15) | P_FUNCT(1)) +#define P_PPI1_D16 (P_DEFINED | P_IDENT(GPIO_PD0) | P_FUNCT(1)) +#define P_PPI1_D17 (P_DEFINED | P_IDENT(GPIO_PD1) | P_FUNCT(1)) +#define P_PPI1_CLK (P_DEFINED | P_IDENT(GPIO_PB14) | P_FUNCT(1)) +#define P_PPI1_FS1 (P_DEFINED | P_IDENT(GPIO_PB13) | P_FUNCT(1)) +#define P_PPI1_FS2 (P_DEFINED | P_IDENT(GPIO_PD6) | P_FUNCT(1)) +#define P_PPI1_FS3 (P_DEFINED | P_IDENT(GPIO_PB15) | P_FUNCT(1)) + +#define P_PPI2_D0 (P_DEFINED | P_IDENT(GPIO_PA0) | P_FUNCT(1)) +#define P_PPI2_D1 (P_DEFINED | P_IDENT(GPIO_PA1) | P_FUNCT(1)) +#define P_PPI2_D2 (P_DEFINED | P_IDENT(GPIO_PA2) | P_FUNCT(1)) +#define P_PPI2_D3 (P_DEFINED | P_IDENT(GPIO_PA3) | P_FUNCT(1)) +#define P_PPI2_D4 (P_DEFINED | P_IDENT(GPIO_PA4) | P_FUNCT(1)) +#define P_PPI2_D5 (P_DEFINED | P_IDENT(GPIO_PA5) | P_FUNCT(1)) +#define P_PPI2_D6 (P_DEFINED | P_IDENT(GPIO_PA6) | P_FUNCT(1)) +#define P_PPI2_D7 (P_DEFINED | P_IDENT(GPIO_PA7) | P_FUNCT(1)) +#define P_PPI2_D8 (P_DEFINED | P_IDENT(GPIO_PA8) | P_FUNCT(1)) +#define P_PPI2_D9 (P_DEFINED | P_IDENT(GPIO_PA9) | P_FUNCT(1)) +#define P_PPI2_D10 (P_DEFINED | P_IDENT(GPIO_PA10) | P_FUNCT(1)) +#define P_PPI2_D11 (P_DEFINED | P_IDENT(GPIO_PA11) | P_FUNCT(1)) +#define P_PPI2_D12 (P_DEFINED | P_IDENT(GPIO_PA12) | P_FUNCT(1)) +#define P_PPI2_D13 (P_DEFINED | P_IDENT(GPIO_PA13) | P_FUNCT(1)) +#define P_PPI2_D14 (P_DEFINED | P_IDENT(GPIO_PA14) | P_FUNCT(1)) +#define P_PPI2_D15 (P_DEFINED | P_IDENT(GPIO_PA15) | P_FUNCT(1)) +#define P_PPI2_D16 (P_DEFINED | P_IDENT(GPIO_PB7) | P_FUNCT(1)) +#define P_PPI2_D17 (P_DEFINED | P_IDENT(GPIO_PB8) | P_FUNCT(1)) +#define P_PPI2_CLK (P_DEFINED | P_IDENT(GPIO_PB0) | P_FUNCT(1)) +#define P_PPI2_FS1 (P_DEFINED | P_IDENT(GPIO_PB1) | P_FUNCT(1)) +#define P_PPI2_FS2 (P_DEFINED | P_IDENT(GPIO_PB2) | P_FUNCT(1)) +#define P_PPI2_FS3 (P_DEFINED | P_IDENT(GPIO_PB3) | P_FUNCT(1)) + +/* SPI Port Mux */ +#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PD11) | P_FUNCT(3)) +#define P_SPI0_SCK (P_DEFINED | P_IDENT(GPIO_PD4) | P_FUNCT(0)) +#define P_SPI0_MISO (P_DEFINED | P_IDENT(GPIO_PD2) | P_FUNCT(0)) +#define P_SPI0_MOSI (P_DEFINED | P_IDENT(GPIO_PD3) | P_FUNCT(0)) +#define P_SPI0_RDY (P_DEFINED | P_IDENT(GPIO_PD10) | P_FUNCT(0)) +#define P_SPI0_D2 (P_DEFINED | P_IDENT(GPIO_PD0) | P_FUNCT(0)) +#define P_SPI0_D3 (P_DEFINED | P_IDENT(GPIO_PD1) | P_FUNCT(0)) + +#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PD11) | P_FUNCT(0)) +#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PD1) | P_FUNCT(2)) +#define P_SPI0_SSEL3 (P_DEFINED | P_IDENT(GPIO_PD0) | P_FUNCT(2)) +#define P_SPI0_SSEL4 (P_DEFINED | P_IDENT(GPIO_PC15) | P_FUNCT(0)) +#define P_SPI0_SSEL5 (P_DEFINED | P_IDENT(GPIO_PD9) | P_FUNCT(0)) +#define P_SPI0_SSEL6 (P_DEFINED | P_IDENT(GPIO_PC13) | P_FUNCT(0)) +#define P_SPI0_SSEL7 (P_DEFINED | P_IDENT(GPIO_PC12) | P_FUNCT(0)) + +#define P_SPI1_SS (P_DEFINED | P_IDENT(GPIO_PD12) | P_FUNCT(3)) +#define P_SPI1_SCK (P_DEFINED | P_IDENT(GPIO_PD5) | P_FUNCT(0)) +#define P_SPI1_MISO (P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(0)) +#define P_SPI1_MOSI (P_DEFINED | P_IDENT(GPIO_PD13) | P_FUNCT(0)) +#define P_SPI1_RDY (P_DEFINED | P_IDENT(GPIO_PE2) | P_FUNCT(0)) +#define P_SPI1_D2 (P_DEFINED | P_IDENT(GPIO_PE1) | P_FUNCT(0)) +#define P_SPI1_D3 (P_DEFINED | P_IDENT(GPIO_PE0) | P_FUNCT(0)) + +#define P_SPI1_SSEL1 (P_DEFINED | P_IDENT(GPIO_PD12) | P_FUNCT(0)) +#define P_SPI1_SSEL2 (P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(2)) +#define P_SPI1_SSEL3 (P_DEFINED | P_IDENT(GPIO_PD10) | P_FUNCT(2)) +#define P_SPI1_SSEL4 (P_DEFINED | P_IDENT(GPIO_PD9) | P_FUNCT(2)) +#define P_SPI1_SSEL5 (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(0)) +#define P_SPI1_SSEL6 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(0)) +#define P_SPI1_SSEL7 (P_DEFINED | P_IDENT(GPIO_PC14) | P_FUNCT(0)) + +#define GPIO_DEFAULT_BOOT_SPI_CS +#define P_DEFAULT_BOOT_SPI_CS + +/* CORE IDLE */ +#define P_IDLEA (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(1)) +#define P_IDLEB (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(1)) +#define P_SLEEP (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(2)) + +/* UART Port Mux */ +#define P_UART0_TX (P_DEFINED | P_IDENT(GPIO_PD7) | P_FUNCT(1)) +#define P_UART0_RX (P_DEFINED | P_IDENT(GPIO_PD8) | P_FUNCT(1)) +#define P_UART0_RTS (P_DEFINED | P_IDENT(GPIO_PD9) | P_FUNCT(1)) +#define P_UART0_CTS (P_DEFINED | P_IDENT(GPIO_PD10) | P_FUNCT(1)) + +#define P_UART1_TX (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(0)) +#define P_UART1_RX (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(0)) +#define P_UART1_RTS (P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(0)) +#define P_UART1_CTS (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(0)) + +/* Timer */ +#define P_TMRCLK (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(3)) +#define P_TMR0 (P_DEFINED | P_IDENT(GPIO_PE14) | P_FUNCT(2)) +#define P_TMR1 (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(1)) +#define P_TMR2 (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(1)) +#define P_TMR3 (P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(1)) +#define P_TMR4 (P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(1)) +#define P_TMR5 (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(1)) +#define P_TMR6 (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(1)) +#define P_TMR7 (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(1)) + +/* RSI */ +#define P_RSI_DATA0 (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(2)) +#define P_RSI_DATA1 (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(2)) +#define P_RSI_DATA2 (P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(2)) +#define P_RSI_DATA3 (P_DEFINED | P_IDENT(GPIO_PE15) | P_FUNCT(2)) +#define P_RSI_DATA4 (P_DEFINED | P_IDENT(GPIO_PE13) | P_FUNCT(2)) +#define P_RSI_DATA5 (P_DEFINED | P_IDENT(GPIO_PE12) | P_FUNCT(2)) +#define P_RSI_DATA6 (P_DEFINED | P_IDENT(GPIO_PE10) | P_FUNCT(2)) +#define P_RSI_DATA7 (P_DEFINED | P_IDENT(GPIO_PE11) | P_FUNCT(2)) +#define P_RSI_CMD (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(1)) +#define P_RSI_CLK (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(1)) + +/* PTP */ +#define P_PTP0_PPS (P_DEFINED | P_IDENT(GPIO_PB15) | P_FUNCT(0)) +#define P_PTP0_CLKIN (P_DEFINED | P_IDENT(GPIO_PC13) | P_FUNCT(2)) +#define P_PTP0_AUXIN (P_DEFINED | P_IDENT(GPIO_PC11) | P_FUNCT(2)) + +#define P_PTP1_PPS (P_DEFINED | P_IDENT(GPIO_PC9) | P_FUNCT(0)) +#define P_PTP1_CLKIN (P_DEFINED | P_IDENT(GPIO_PC13) | P_FUNCT(2)) +#define P_PTP1_AUXIN (P_DEFINED | P_IDENT(GPIO_PC11) | P_FUNCT(2)) + +/* SMC Port Mux */ +#define P_A3 (P_DEFINED | P_IDENT(GPIO_PA0) | P_FUNCT(0)) +#define P_A4 (P_DEFINED | P_IDENT(GPIO_PA1) | P_FUNCT(0)) +#define P_A5 (P_DEFINED | P_IDENT(GPIO_PA2) | P_FUNCT(0)) +#define P_A6 (P_DEFINED | P_IDENT(GPIO_PA3) | P_FUNCT(0)) +#define P_A7 (P_DEFINED | P_IDENT(GPIO_PA4) | P_FUNCT(0)) +#define P_A8 (P_DEFINED | P_IDENT(GPIO_PA5) | P_FUNCT(0)) +#define P_A9 (P_DEFINED | P_IDENT(GPIO_PA6) | P_FUNCT(0)) +#define P_A10 (P_DEFINED | P_IDENT(GPIO_PA7) | P_FUNCT(0)) +#define P_A11 (P_DEFINED | P_IDENT(GPIO_PA8) | P_FUNCT(0)) +#define P_A12 (P_DEFINED | P_IDENT(GPIO_PA9) | P_FUNCT(0)) +#define P_A13 (P_DEFINED | P_IDENT(GPIO_PB2) | P_FUNCT(0)) +#define P_A14 (P_DEFINED | P_IDENT(GPIO_PA10) | P_FUNCT(0)) +#define P_A15 (P_DEFINED | P_IDENT(GPIO_PA11) | P_FUNCT(0)) +#define P_A16 (P_DEFINED | P_IDENT(GPIO_PB3) | P_FUNCT(0)) +#define P_A17 (P_DEFINED | P_IDENT(GPIO_PA12) | P_FUNCT(0)) +#define P_A18 (P_DEFINED | P_IDENT(GPIO_PA13) | P_FUNCT(0)) +#define P_A19 (P_DEFINED | P_IDENT(GPIO_PA14) | P_FUNCT(0)) +#define P_A20 (P_DEFINED | P_IDENT(GPIO_PA15) | P_FUNCT(0)) +#define P_A21 (P_DEFINED | P_IDENT(GPIO_PB6) | P_FUNCT(0)) +#define P_A22 (P_DEFINED | P_IDENT(GPIO_PB7) | P_FUNCT(0)) +#define P_A23 (P_DEFINED | P_IDENT(GPIO_PB8) | P_FUNCT(0)) +#define P_A24 (P_DEFINED | P_IDENT(GPIO_PB10) | P_FUNCT(0)) +#define P_A25 (P_DEFINED | P_IDENT(GPIO_PB11) | P_FUNCT(0)) +#define P_NORCK (P_DEFINED | P_IDENT(GPIO_PB0) | P_FUNCT(0)) + +#define P_AMS1 (P_DEFINED | P_IDENT(GPIO_PB1) | P_FUNCT(0)) +#define P_AMS2 (P_DEFINED | P_IDENT(GPIO_PB4) | P_FUNCT(0)) +#define P_AMS3 (P_DEFINED | P_IDENT(GPIO_PB5) | P_FUNCT(0)) + +/* CAN */ +#define P_CAN0_TX (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(2)) +#define P_CAN0_RX (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(2)) + +/* SPORT */ +#define P_SPORT0_ACLK (P_DEFINED | P_IDENT(GPIO_PB5) | P_FUNCT(2)) +#define P_SPORT0_AFS (P_DEFINED | P_IDENT(GPIO_PB4) | P_FUNCT(2)) +#define P_SPORT0_AD0 (P_DEFINED | P_IDENT(GPIO_PB9) | P_FUNCT(2)) +#define P_SPORT0_AD1 (P_DEFINED | P_IDENT(GPIO_PB12) | P_FUNCT(2)) +#define P_SPORT0_ATDV (P_DEFINED | P_IDENT(GPIO_PB6) | P_FUNCT(1)) +#define P_SPORT0_BCLK (P_DEFINED | P_IDENT(GPIO_PB8) | P_FUNCT(2)) +#define P_SPORT0_BFS (P_DEFINED | P_IDENT(GPIO_PB7) | P_FUNCT(2)) +#define P_SPORT0_BD0 (P_DEFINED | P_IDENT(GPIO_PB11) | P_FUNCT(2)) +#define P_SPORT0_BD1 (P_DEFINED | P_IDENT(GPIO_PB10) | P_FUNCT(2)) +#define P_SPORT0_BTDV (P_DEFINED | P_IDENT(GPIO_PB12) | P_FUNCT(1)) + +#define P_SPORT1_ACLK (P_DEFINED | P_IDENT(GPIO_PE2) | P_FUNCT(2)) +#define P_SPORT1_AFS (P_DEFINED | P_IDENT(GPIO_PE5) | P_FUNCT(2)) +#define P_SPORT1_AD0 (P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(2)) +#define P_SPORT1_AD1 (P_DEFINED | P_IDENT(GPIO_PD12) | P_FUNCT(2)) +#define P_SPORT1_ATDV (P_DEFINED | P_IDENT(GPIO_PE6) | P_FUNCT(0)) +#define P_SPORT1_BCLK (P_DEFINED | P_IDENT(GPIO_PE4) | P_FUNCT(2)) +#define P_SPORT1_BFS (P_DEFINED | P_IDENT(GPIO_PE3) | P_FUNCT(2)) +#define P_SPORT1_BD0 (P_DEFINED | P_IDENT(GPIO_PE1) | P_FUNCT(2)) +#define P_SPORT1_BD1 (P_DEFINED | P_IDENT(GPIO_PE0) | P_FUNCT(2)) +#define P_SPORT1_BTDV (P_DEFINED | P_IDENT(GPIO_PE7) | P_FUNCT(0)) + +#define P_SPORT2_ACLK (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(0)) +#define P_SPORT2_AFS (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0)) +#define P_SPORT2_AD0 (P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(0)) +#define P_SPORT2_AD1 (P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(0)) +#define P_SPORT2_ATDV (P_DEFINED | P_IDENT(GPIO_PE14) | P_FUNCT(1)) +#define P_SPORT2_BCLK (P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(1)) +#define P_SPORT2_BFS (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(0)) +#define P_SPORT2_BD0 (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(0)) +#define P_SPORT2_BD1 (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(0)) +#define P_SPORT2_BTDV (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(2)) + +/* LINK PORT */ +#define P_LP0_CLK (P_DEFINED | P_IDENT(GPIO_PB0) | P_FUNCT(2)) +#define P_LP0_ACK (P_DEFINED | P_IDENT(GPIO_PB1) | P_FUNCT(2)) +#define P_LP0_D0 (P_DEFINED | P_IDENT(GPIO_PA0) | P_FUNCT(2)) +#define P_LP0_D1 (P_DEFINED | P_IDENT(GPIO_PA1) | P_FUNCT(2)) +#define P_LP0_D2 (P_DEFINED | P_IDENT(GPIO_PA2) | P_FUNCT(2)) +#define P_LP0_D3 (P_DEFINED | P_IDENT(GPIO_PA3) | P_FUNCT(2)) +#define P_LP0_D4 (P_DEFINED | P_IDENT(GPIO_PA4) | P_FUNCT(2)) +#define P_LP0_D5 (P_DEFINED | P_IDENT(GPIO_PA5) | P_FUNCT(2)) +#define P_LP0_D6 (P_DEFINED | P_IDENT(GPIO_PA6) | P_FUNCT(2)) +#define P_LP0_D7 (P_DEFINED | P_IDENT(GPIO_PA7) | P_FUNCT(2)) + +#define P_LP1_CLK (P_DEFINED | P_IDENT(GPIO_PB3) | P_FUNCT(2)) +#define P_LP1_ACK (P_DEFINED | P_IDENT(GPIO_PB2) | P_FUNCT(2)) +#define P_LP1_D0 (P_DEFINED | P_IDENT(GPIO_PA8) | P_FUNCT(2)) +#define P_LP1_D1 (P_DEFINED | P_IDENT(GPIO_PA9) | P_FUNCT(2)) +#define P_LP1_D2 (P_DEFINED | P_IDENT(GPIO_PA10) | P_FUNCT(2)) +#define P_LP1_D3 (P_DEFINED | P_IDENT(GPIO_PA11) | P_FUNCT(2)) +#define P_LP1_D4 (P_DEFINED | P_IDENT(GPIO_PA12) | P_FUNCT(2)) +#define P_LP1_D5 (P_DEFINED | P_IDENT(GPIO_PA13) | P_FUNCT(2)) +#define P_LP1_D6 (P_DEFINED | P_IDENT(GPIO_PA14) | P_FUNCT(2)) +#define P_LP1_D7 (P_DEFINED | P_IDENT(GPIO_PA15) | P_FUNCT(2)) + +#define P_LP2_CLK (P_DEFINED | P_IDENT(GPIO_PE6) | P_FUNCT(2)) +#define P_LP2_ACK (P_DEFINED | P_IDENT(GPIO_PE7) | P_FUNCT(2)) +#define P_LP2_D0 (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(2)) +#define P_LP2_D1 (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(2)) +#define P_LP2_D2 (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(2)) +#define P_LP2_D3 (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(2)) +#define P_LP2_D4 (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(2)) +#define P_LP2_D5 (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(2)) +#define P_LP2_D6 (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(2)) +#define P_LP2_D7 (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(2)) + +#define P_LP3_CLK (P_DEFINED | P_IDENT(GPIO_PE9) | P_FUNCT(2)) +#define P_LP3_ACK (P_DEFINED | P_IDENT(GPIO_PE8) | P_FUNCT(2)) +#define P_LP3_D0 (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(2)) +#define P_LP3_D1 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(2)) +#define P_LP3_D2 (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(2)) +#define P_LP3_D3 (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(2)) +#define P_LP3_D4 (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(2)) +#define P_LP3_D5 (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(2)) +#define P_LP3_D6 (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(2)) +#define P_LP3_D7 (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(2)) + +/* TWI */ +#define P_TWI0_SCL (P_DONTCARE) +#define P_TWI0_SDA (P_DONTCARE) +#define P_TWI1_SCL (P_DONTCARE) +#define P_TWI1_SDA (P_DONTCARE) + +/* Rotary Encoder */ +#define P_CNT_CZM (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(3)) +#define P_CNT_CUD (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(3)) +#define P_CNT_CDG (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(3)) + +#endif /* _MACH_PORTMUX_H_ */ diff --git a/arch/blackfin/mach-bf609/ints-priority.c b/arch/blackfin/mach-bf609/ints-priority.c new file mode 100644 index 00000000000..f68abb9aa79 --- /dev/null +++ b/arch/blackfin/mach-bf609/ints-priority.c @@ -0,0 +1,156 @@ +/* + * Copyright 2007-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + * + * Set up the interrupt priorities + */ + +#include <linux/module.h> +#include <linux/irq.h> +#include <asm/blackfin.h> + +u8 sec_int_priority[] = { + 255, /* IRQ_SEC_ERR */ + 255, /* IRQ_CGU_EVT */ + 254, /* IRQ_WATCH0 */ + 254, /* IRQ_WATCH1 */ + 253, /* IRQ_L2CTL0_ECC_ERR */ + 253, /* IRQ_L2CTL0_ECC_WARN */ + 253, /* IRQ_C0_DBL_FAULT */ + 253, /* IRQ_C1_DBL_FAULT */ + 252, /* IRQ_C0_HW_ERR */ + 252, /* IRQ_C1_HW_ERR */ + 255, /* IRQ_C0_NMI_L1_PARITY_ERR */ + 255, /* IRQ_C1_NMI_L1_PARITY_ERR */ + + 50, /* IRQ_TIMER0 */ + 50, /* IRQ_TIMER1 */ + 50, /* IRQ_TIMER2 */ + 50, /* IRQ_TIMER3 */ + 50, /* IRQ_TIMER4 */ + 50, /* IRQ_TIMER5 */ + 50, /* IRQ_TIMER6 */ + 50, /* IRQ_TIMER7 */ + 50, /* IRQ_TIMER_STAT */ + 0, /* IRQ_PINT0 */ + 0, /* IRQ_PINT1 */ + 0, /* IRQ_PINT2 */ + 0, /* IRQ_PINT3 */ + 0, /* IRQ_PINT4 */ + 0, /* IRQ_PINT5 */ + 0, /* IRQ_CNT */ + 50, /* RQ_PWM0_TRIP */ + 50, /* IRQ_PWM0_SYNC */ + 50, /* IRQ_PWM1_TRIP */ + 50, /* IRQ_PWM1_SYNC */ + 0, /* IRQ_TWI0 */ + 0, /* IRQ_TWI1 */ + 10, /* IRQ_SOFT0 */ + 10, /* IRQ_SOFT1 */ + 10, /* IRQ_SOFT2 */ + 10, /* IRQ_SOFT3 */ + 0, /* IRQ_ACM_EVT_MISS */ + 0, /* IRQ_ACM_EVT_COMPLETE */ + 0, /* IRQ_CAN0_RX */ + 0, /* IRQ_CAN0_TX */ + 0, /* IRQ_CAN0_STAT */ + 100, /* IRQ_SPORT0_TX */ + 100, /* IRQ_SPORT0_TX_STAT */ + 100, /* IRQ_SPORT0_RX */ + 100, /* IRQ_SPORT0_RX_STAT */ + 100, /* IRQ_SPORT1_TX */ + 100, /* IRQ_SPORT1_TX_STAT */ + 100, /* IRQ_SPORT1_RX */ + 100, /* IRQ_SPORT1_RX_STAT */ + 100, /* IRQ_SPORT2_TX */ + 100, /* IRQ_SPORT2_TX_STAT */ + 100, /* IRQ_SPORT2_RX */ + 100, /* IRQ_SPORT2_RX_STAT */ + 0, /* IRQ_SPI0_TX */ + 0, /* IRQ_SPI0_RX */ + 0, /* IRQ_SPI0_STAT */ + 0, /* IRQ_SPI1_TX */ + 0, /* IRQ_SPI1_RX */ + 0, /* IRQ_SPI1_STAT */ + 0, /* IRQ_RSI */ + 0, /* IRQ_RSI_INT0 */ + 0, /* IRQ_RSI_INT1 */ + 0, /* DMA11 Data (SDU) */ + 0, /* DMA12 Data (Reserved) */ + 0, /* Reserved */ + 0, /* Reserved */ + 30, /* IRQ_EMAC0_STAT */ + 0, /* EMAC0 Power (Reserved) */ + 30, /* IRQ_EMAC1_STAT */ + 0, /* EMAC1 Power (Reserved) */ + 0, /* IRQ_LP0 */ + 0, /* IRQ_LP0_STAT */ + 0, /* IRQ_LP1 */ + 0, /* IRQ_LP1_STAT */ + 0, /* IRQ_LP2 */ + 0, /* IRQ_LP2_STAT */ + 0, /* IRQ_LP3 */ + 0, /* IRQ_LP3_STAT */ + 0, /* IRQ_UART0_TX */ + 0, /* IRQ_UART0_RX */ + 0, /* IRQ_UART0_STAT */ + 0, /* IRQ_UART1_TX */ + 0, /* IRQ_UART1_RX */ + 0, /* IRQ_UART1_STAT */ + 0, /* IRQ_MDMA0_SRC_CRC0 */ + 0, /* IRQ_MDMA0_DEST_CRC0 */ + 0, /* IRQ_CRC0_DCNTEXP */ + 0, /* IRQ_CRC0_ERR */ + 0, /* IRQ_MDMA1_SRC_CRC1 */ + 0, /* IRQ_MDMA1_DEST_CRC1 */ + 0, /* IRQ_CRC1_DCNTEXP */ + 0, /* IRQ_CRC1_ERR */ + 0, /* IRQ_MDMA2_SRC */ + 0, /* IRQ_MDMA2_DEST */ + 0, /* IRQ_MDMA3_SRC */ + 0, /* IRQ_MDMA3_DEST */ + 120, /* IRQ_EPPI0_CH0 */ + 120, /* IRQ_EPPI0_CH1 */ + 120, /* IRQ_EPPI0_STAT */ + 120, /* IRQ_EPPI2_CH0 */ + 120, /* IRQ_EPPI2_CH1 */ + 120, /* IRQ_EPPI2_STAT */ + 120, /* IRQ_EPPI1_CH0 */ + 120, /* IRQ_EPPI1_CH1 */ + 120, /* IRQ_EPPI1_STAT */ + 120, /* IRQ_PIXC_CH0 */ + 120, /* IRQ_PIXC_CH1 */ + 120, /* IRQ_PIXC_CH2 */ + 120, /* IRQ_PIXC_STAT */ + 120, /* IRQ_PVP_CPDOB */ + 120, /* IRQ_PVP_CPDOC */ + 120, /* IRQ_PVP_CPSTAT */ + 120, /* IRQ_PVP_CPCI */ + 120, /* IRQ_PVP_STAT0 */ + 120, /* IRQ_PVP_MPDO */ + 120, /* IRQ_PVP_MPDI */ + 120, /* IRQ_PVP_MPSTAT */ + 120, /* IRQ_PVP_MPCI */ + 120, /* IRQ_PVP_CPDOA */ + 120, /* IRQ_PVP_STAT1 */ + 0, /* IRQ_USB_STAT */ + 0, /* IRQ_USB_DMA */ + 0, /* IRQ_TRU_INT0 */ + 0, /* IRQ_TRU_INT1 */ + 0, /* IRQ_TRU_INT2 */ + 0, /* IRQ_TRU_INT3 */ + 0, /* IRQ_DMAC0_ERROR */ + 0, /* IRQ_CGU0_ERROR */ + 0, /* Reserved */ + 0, /* IRQ_DPM */ + 0, /* Reserved */ + 0, /* IRQ_SWU0 */ + 0, /* IRQ_SWU1 */ + 0, /* IRQ_SWU2 */ + 0, /* IRQ_SWU3 */ + 0, /* IRQ_SWU4 */ + 0, /* IRQ_SWU4 */ + 0, /* IRQ_SWU6 */ +}; + diff --git a/arch/blackfin/mach-bf609/pm.c b/arch/blackfin/mach-bf609/pm.c new file mode 100644 index 00000000000..b1bfcf434d1 --- /dev/null +++ b/arch/blackfin/mach-bf609/pm.c @@ -0,0 +1,361 @@ +/* + * Blackfin bf609 power management + * + * Copyright 2011 Analog Devices Inc. + * + * Licensed under the GPL-2 + */ + +#include <linux/suspend.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/gpio.h> +#include <linux/irq.h> +#include <linux/delay.h> +#include <linux/syscore_ops.h> + +#include <asm/dpmc.h> +#include <asm/pm.h> +#include <mach/pm.h> +#include <asm/blackfin.h> +#include <asm/mem_init.h> + +/***********************************************************/ +/* */ +/* Wakeup Actions for DPM_RESTORE */ +/* */ +/***********************************************************/ +#define BITP_ROM_WUA_CHKHDR 24 +#define BITP_ROM_WUA_DDRLOCK 7 +#define BITP_ROM_WUA_DDRDLLEN 6 +#define BITP_ROM_WUA_DDR 5 +#define BITP_ROM_WUA_CGU 4 +#define BITP_ROM_WUA_MEMBOOT 2 +#define BITP_ROM_WUA_EN 1 + +#define BITM_ROM_WUA_CHKHDR (0xFF000000) +#define ENUM_ROM_WUA_CHKHDR_AD 0xAD000000 + +#define BITM_ROM_WUA_DDRLOCK (0x00000080) +#define BITM_ROM_WUA_DDRDLLEN (0x00000040) +#define BITM_ROM_WUA_DDR (0x00000020) +#define BITM_ROM_WUA_CGU (0x00000010) +#define BITM_ROM_WUA_MEMBOOT (0x00000002) +#define BITM_ROM_WUA_EN (0x00000001) + +/***********************************************************/ +/* */ +/* Syscontrol */ +/* */ +/***********************************************************/ +#define BITP_ROM_SYSCTRL_CGU_LOCKINGEN 28 /* unlocks CGU_CTL register */ +#define BITP_ROM_SYSCTRL_WUA_OVERRIDE 24 +#define BITP_ROM_SYSCTRL_WUA_DDRDLLEN 20 /* Saves the DDR DLL and PADS registers to the DPM registers */ +#define BITP_ROM_SYSCTRL_WUA_DDR 19 /* Saves the DDR registers to the DPM registers */ +#define BITP_ROM_SYSCTRL_WUA_CGU 18 /* Saves the CGU registers into DPM registers */ +#define BITP_ROM_SYSCTRL_WUA_DPMWRITE 17 /* Saves the Syscontrol structure structure contents into DPM registers */ +#define BITP_ROM_SYSCTRL_WUA_EN 16 /* reads current PLL and DDR configuration into structure */ +#define BITP_ROM_SYSCTRL_DDR_WRITE 13 /* writes the DDR registers from Syscontrol structure for wakeup initialization of DDR */ +#define BITP_ROM_SYSCTRL_DDR_READ 12 /* Read the DDR registers into the Syscontrol structure for storing prior to hibernate */ +#define BITP_ROM_SYSCTRL_CGU_AUTODIS 11 /* Disables auto handling of UPDT and ALGN fields */ +#define BITP_ROM_SYSCTRL_CGU_CLKOUTSEL 7 /* access CGU_CLKOUTSEL register */ +#define BITP_ROM_SYSCTRL_CGU_DIV 6 /* access CGU_DIV register */ +#define BITP_ROM_SYSCTRL_CGU_STAT 5 /* access CGU_STAT register */ +#define BITP_ROM_SYSCTRL_CGU_CTL 4 /* access CGU_CTL register */ +#define BITP_ROM_SYSCTRL_CGU_RTNSTAT 2 /* Update structure STAT field upon error */ +#define BITP_ROM_SYSCTRL_WRITE 1 /* write registers */ +#define BITP_ROM_SYSCTRL_READ 0 /* read registers */ + +#define BITM_ROM_SYSCTRL_CGU_READ (0x00000001) /* Read CGU registers */ +#define BITM_ROM_SYSCTRL_CGU_WRITE (0x00000002) /* Write registers */ +#define BITM_ROM_SYSCTRL_CGU_RTNSTAT (0x00000004) /* Update structure STAT field upon error or after a write operation */ +#define BITM_ROM_SYSCTRL_CGU_CTL (0x00000010) /* Access CGU_CTL register */ +#define BITM_ROM_SYSCTRL_CGU_STAT (0x00000020) /* Access CGU_STAT register */ +#define BITM_ROM_SYSCTRL_CGU_DIV (0x00000040) /* Access CGU_DIV register */ +#define BITM_ROM_SYSCTRL_CGU_CLKOUTSEL (0x00000080) /* Access CGU_CLKOUTSEL register */ +#define BITM_ROM_SYSCTRL_CGU_AUTODIS (0x00000800) /* Disables auto handling of UPDT and ALGN fields */ +#define BITM_ROM_SYSCTRL_DDR_READ (0x00001000) /* Reads the contents of the DDR registers and stores them into the structure */ +#define BITM_ROM_SYSCTRL_DDR_WRITE (0x00002000) /* Writes the DDR registers from the structure, only really intented for wakeup functionality and not for full DDR configuration */ +#define BITM_ROM_SYSCTRL_WUA_EN (0x00010000) /* Wakeup entry or exit opertation enable */ +#define BITM_ROM_SYSCTRL_WUA_DPMWRITE (0x00020000) /* When set indicates a restore of the PLL and DDR is to be performed otherwise a save is required */ +#define BITM_ROM_SYSCTRL_WUA_CGU (0x00040000) /* Only applicable for a PLL and DDR save operation to the DPM, saves the current settings if cleared or the contents of the structure if set */ +#define BITM_ROM_SYSCTRL_WUA_DDR (0x00080000) /* Only applicable for a PLL and DDR save operation to the DPM, saves the current settings if cleared or the contents of the structure if set */ +#define BITM_ROM_SYSCTRL_WUA_DDRDLLEN (0x00100000) /* Enables saving/restoring of the DDR DLLCTL register */ +#define BITM_ROM_SYSCTRL_WUA_OVERRIDE (0x01000000) +#define BITM_ROM_SYSCTRL_CGU_LOCKINGEN (0x10000000) /* Unlocks the CGU_CTL register */ + + +/* Structures for the syscontrol() function */ +struct STRUCT_ROM_SYSCTRL { + uint32_t ulCGU_CTL; + uint32_t ulCGU_STAT; + uint32_t ulCGU_DIV; + uint32_t ulCGU_CLKOUTSEL; + uint32_t ulWUA_Flags; + uint32_t ulWUA_BootAddr; + uint32_t ulWUA_User; + uint32_t ulDDR_CTL; + uint32_t ulDDR_CFG; + uint32_t ulDDR_TR0; + uint32_t ulDDR_TR1; + uint32_t ulDDR_TR2; + uint32_t ulDDR_MR; + uint32_t ulDDR_EMR1; + uint32_t ulDDR_EMR2; + uint32_t ulDDR_PADCTL; + uint32_t ulDDR_DLLCTL; + uint32_t ulReserved; +}; + +struct bfin_pm_data { + uint32_t magic; + uint32_t resume_addr; + uint32_t sp; +}; + +struct bfin_pm_data bf609_pm_data; + +struct STRUCT_ROM_SYSCTRL configvalues; +uint32_t dactionflags; + +#define FUNC_ROM_SYSCONTROL 0xC8000080 +__attribute__((l1_data)) +static uint32_t (* const bfrom_SysControl)(uint32_t action_flags, struct STRUCT_ROM_SYSCTRL *settings, void *reserved) = (void *)FUNC_ROM_SYSCONTROL; + +__attribute__((l1_text)) +void bfin_cpu_suspend(void) +{ + __asm__ __volatile__( \ + ".align 8;" \ + "idle;" \ + : : \ + ); +} + +__attribute__((l1_text)) +void bf609_ddr_sr(void) +{ + dmc_enter_self_refresh(); +} + +__attribute__((l1_text)) +void bf609_ddr_sr_exit(void) +{ + dmc_exit_self_refresh(); + + /* After wake up from deep sleep and exit DDR from self refress mode, + * should wait till CGU PLL is locked. + */ + while (bfin_read32(CGU0_STAT) & CLKSALGN) + continue; +} + +__attribute__((l1_text)) +void bf609_resume_ccbuf(void) +{ + bfin_write32(DPM0_CCBF_EN, 3); + bfin_write32(DPM0_CTL, 2); + + while ((bfin_read32(DPM0_STAT) & 0xf) != 1); +} + +__attribute__((l1_text)) +void bfin_hibernate_syscontrol(void) +{ + configvalues.ulWUA_Flags = (0xAD000000 | BITM_ROM_WUA_EN + | BITM_ROM_WUA_CGU | BITM_ROM_WUA_DDR | BITM_ROM_WUA_DDRDLLEN); + + dactionflags = (BITM_ROM_SYSCTRL_WUA_EN + | BITM_ROM_SYSCTRL_WUA_DPMWRITE | BITM_ROM_SYSCTRL_WUA_CGU + | BITM_ROM_SYSCTRL_WUA_DDR | BITM_ROM_SYSCTRL_WUA_DDRDLLEN); + + bfrom_SysControl(dactionflags, &configvalues, NULL); + + bfin_write32(DPM0_RESTORE5, bfin_read32(DPM0_RESTORE5) | 4); +} + +asmlinkage void enter_deepsleep(void); + +__attribute__((l1_text)) +void bfin_deepsleep(unsigned long mask, unsigned long pol_mask) +{ + bfin_write32(DPM0_WAKE_EN, mask); + bfin_write32(DPM0_WAKE_POL, pol_mask); + SSYNC(); + enter_deepsleep(); +} + +void bfin_hibernate(unsigned long mask, unsigned long pol_mask) +{ + bfin_write32(DPM0_WAKE_EN, mask); + bfin_write32(DPM0_WAKE_POL, pol_mask); + bfin_write32(DPM0_PGCNTR, 0x0000FFFF); + bfin_write32(DPM0_HIB_DIS, 0xFFFF); + + bf609_hibernate(); +} + +void bf609_cpu_pm_enter(suspend_state_t state) +{ + int error; + unsigned long wakeup = 0; + unsigned long wakeup_pol = 0; + +#ifdef CONFIG_PM_BFIN_WAKE_PA15 + wakeup |= PA15WE; +# if CONFIG_PM_BFIN_WAKE_PA15_POL + wakeup_pol |= PA15WE; +# endif +#endif + +#ifdef CONFIG_PM_BFIN_WAKE_PB15 + wakeup |= PB15WE; +# if CONFIG_PM_BFIN_WAKE_PB15_POL + wakeup_pol |= PB15WE; +# endif +#endif + +#ifdef CONFIG_PM_BFIN_WAKE_PC15 + wakeup |= PC15WE; +# if CONFIG_PM_BFIN_WAKE_PC15_POL + wakeup_pol |= PC15WE; +# endif +#endif + +#ifdef CONFIG_PM_BFIN_WAKE_PD06 + wakeup |= PD06WE; +# if CONFIG_PM_BFIN_WAKE_PD06_POL + wakeup_pol |= PD06WE; +# endif +#endif + +#ifdef CONFIG_PM_BFIN_WAKE_PE12 + wakeup |= PE12WE; +# if CONFIG_PM_BFIN_WAKE_PE12_POL + wakeup_pol |= PE12WE; +# endif +#endif + +#ifdef CONFIG_PM_BFIN_WAKE_PG04 + wakeup |= PG04WE; +# if CONFIG_PM_BFIN_WAKE_PG04_POL + wakeup_pol |= PG04WE; +# endif +#endif + +#ifdef CONFIG_PM_BFIN_WAKE_PG13 + wakeup |= PG13WE; +# if CONFIG_PM_BFIN_WAKE_PG13_POL + wakeup_pol |= PG13WE; +# endif +#endif + +#ifdef CONFIG_PM_BFIN_WAKE_USB + wakeup |= USBWE; +# if CONFIG_PM_BFIN_WAKE_USB_POL + wakeup_pol |= USBWE; +# endif +#endif + + error = irq_set_irq_wake(255, 1); + if(error < 0) + printk(KERN_DEBUG "Unable to get irq wake\n"); + error = irq_set_irq_wake(231, 1); + if (error < 0) + printk(KERN_DEBUG "Unable to get irq wake\n"); + + if (state == PM_SUSPEND_STANDBY) + bfin_deepsleep(wakeup, wakeup_pol); + else { + bfin_hibernate(wakeup, wakeup_pol); + } + +} + +int bf609_cpu_pm_prepare(void) +{ + return 0; +} + +void bf609_cpu_pm_finish(void) +{ + +} + +static struct bfin_cpu_pm_fns bf609_cpu_pm = { + .enter = bf609_cpu_pm_enter, + .prepare = bf609_cpu_pm_prepare, + .finish = bf609_cpu_pm_finish, +}; + +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +static int smc_pm_syscore_suspend(void) +{ + bf609_nor_flash_exit(NULL); + return 0; +} + +static void smc_pm_syscore_resume(void) +{ + bf609_nor_flash_init(NULL); +} + +static struct syscore_ops smc_pm_syscore_ops = { + .suspend = smc_pm_syscore_suspend, + .resume = smc_pm_syscore_resume, +}; +#endif + +static irqreturn_t test_isr(int irq, void *dev_id) +{ + printk(KERN_DEBUG "gpio irq %d\n", irq); + if (irq == 231) + bfin_sec_raise_irq(BFIN_SYSIRQ(IRQ_SOFT1)); + return IRQ_HANDLED; +} + +static irqreturn_t dpm0_isr(int irq, void *dev_id) +{ + bfin_write32(DPM0_WAKE_STAT, bfin_read32(DPM0_WAKE_STAT)); + bfin_write32(CGU0_STAT, bfin_read32(CGU0_STAT)); + return IRQ_HANDLED; +} + +static int __init bf609_init_pm(void) +{ + int irq; + int error; + +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) + register_syscore_ops(&smc_pm_syscore_ops); +#endif + +#ifdef CONFIG_PM_BFIN_WAKE_PE12 + irq = gpio_to_irq(GPIO_PE12); + if (irq < 0) { + error = irq; + printk(KERN_DEBUG "Unable to get irq number for GPIO %d, error %d\n", + GPIO_PE12, error); + } + + error = request_irq(irq, test_isr, IRQF_TRIGGER_RISING | IRQF_NO_SUSPEND + | IRQF_FORCE_RESUME, "gpiope12", NULL); + if(error < 0) + printk(KERN_DEBUG "Unable to get irq\n"); +#endif + + error = request_irq(IRQ_CGU_EVT, dpm0_isr, IRQF_NO_SUSPEND | + IRQF_FORCE_RESUME, "cgu0 event", NULL); + if(error < 0) + printk(KERN_DEBUG "Unable to get irq\n"); + + error = request_irq(IRQ_DPM, dpm0_isr, IRQF_NO_SUSPEND | + IRQF_FORCE_RESUME, "dpm0 event", NULL); + if (error < 0) + printk(KERN_DEBUG "Unable to get irq\n"); + + bfin_cpu_pm = &bf609_cpu_pm; + return 0; +} + +late_initcall(bf609_init_pm); diff --git a/arch/blackfin/mach-bf609/scb.c b/arch/blackfin/mach-bf609/scb.c new file mode 100644 index 00000000000..ac1f07c3359 --- /dev/null +++ b/arch/blackfin/mach-bf609/scb.c @@ -0,0 +1,363 @@ +/* + * arch/blackfin/mach-common/scb-init.c - reprogram system cross bar priority + * + * Copyright 2012 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <asm/blackfin.h> +#include <asm/scb.h> + +struct scb_mi_prio scb_data[] = { +#ifdef CONFIG_SCB0_MI0 + { REG_SCB0_ARBR0, REG_SCB0_ARBW0, 32, { + CONFIG_SCB0_MI0_SLOT0, + CONFIG_SCB0_MI0_SLOT1, + CONFIG_SCB0_MI0_SLOT2, + CONFIG_SCB0_MI0_SLOT3, + CONFIG_SCB0_MI0_SLOT4, + CONFIG_SCB0_MI0_SLOT5, + CONFIG_SCB0_MI0_SLOT6, + CONFIG_SCB0_MI0_SLOT7, + CONFIG_SCB0_MI0_SLOT8, + CONFIG_SCB0_MI0_SLOT9, + CONFIG_SCB0_MI0_SLOT10, + CONFIG_SCB0_MI0_SLOT11, + CONFIG_SCB0_MI0_SLOT12, + CONFIG_SCB0_MI0_SLOT13, + CONFIG_SCB0_MI0_SLOT14, + CONFIG_SCB0_MI0_SLOT15, + CONFIG_SCB0_MI0_SLOT16, + CONFIG_SCB0_MI0_SLOT17, + CONFIG_SCB0_MI0_SLOT18, + CONFIG_SCB0_MI0_SLOT19, + CONFIG_SCB0_MI0_SLOT20, + CONFIG_SCB0_MI0_SLOT21, + CONFIG_SCB0_MI0_SLOT22, + CONFIG_SCB0_MI0_SLOT23, + CONFIG_SCB0_MI0_SLOT24, + CONFIG_SCB0_MI0_SLOT25, + CONFIG_SCB0_MI0_SLOT26, + CONFIG_SCB0_MI0_SLOT27, + CONFIG_SCB0_MI0_SLOT28, + CONFIG_SCB0_MI0_SLOT29, + CONFIG_SCB0_MI0_SLOT30, + CONFIG_SCB0_MI0_SLOT31 + }, + }, +#endif +#ifdef CONFIG_SCB0_MI1 + { REG_SCB0_ARBR1, REG_SCB0_ARBW1, 32, { + CONFIG_SCB0_MI1_SLOT0, + CONFIG_SCB0_MI1_SLOT1, + CONFIG_SCB0_MI1_SLOT2, + CONFIG_SCB0_MI1_SLOT3, + CONFIG_SCB0_MI1_SLOT4, + CONFIG_SCB0_MI1_SLOT5, + CONFIG_SCB0_MI1_SLOT6, + CONFIG_SCB0_MI1_SLOT7, + CONFIG_SCB0_MI1_SLOT8, + CONFIG_SCB0_MI1_SLOT9, + CONFIG_SCB0_MI1_SLOT10, + CONFIG_SCB0_MI1_SLOT11, + CONFIG_SCB0_MI1_SLOT12, + CONFIG_SCB0_MI1_SLOT13, + CONFIG_SCB0_MI1_SLOT14, + CONFIG_SCB0_MI1_SLOT15, + CONFIG_SCB0_MI1_SLOT16, + CONFIG_SCB0_MI1_SLOT17, + CONFIG_SCB0_MI1_SLOT18, + CONFIG_SCB0_MI1_SLOT19, + CONFIG_SCB0_MI1_SLOT20, + CONFIG_SCB0_MI1_SLOT21, + CONFIG_SCB0_MI1_SLOT22, + CONFIG_SCB0_MI1_SLOT23, + CONFIG_SCB0_MI1_SLOT24, + CONFIG_SCB0_MI1_SLOT25, + CONFIG_SCB0_MI1_SLOT26, + CONFIG_SCB0_MI1_SLOT27, + CONFIG_SCB0_MI1_SLOT28, + CONFIG_SCB0_MI1_SLOT29, + CONFIG_SCB0_MI1_SLOT30, + CONFIG_SCB0_MI1_SLOT31 + }, + }, +#endif +#ifdef CONFIG_SCB0_MI2 + { REG_SCB0_ARBR2, REG_SCB0_ARBW2, 32, { + CONFIG_SCB0_MI2_SLOT0, + CONFIG_SCB0_MI2_SLOT1, + CONFIG_SCB0_MI2_SLOT2, + CONFIG_SCB0_MI2_SLOT3, + CONFIG_SCB0_MI2_SLOT4, + CONFIG_SCB0_MI2_SLOT5, + CONFIG_SCB0_MI2_SLOT6, + CONFIG_SCB0_MI2_SLOT7, + CONFIG_SCB0_MI2_SLOT8, + CONFIG_SCB0_MI2_SLOT9, + CONFIG_SCB0_MI2_SLOT10, + CONFIG_SCB0_MI2_SLOT11, + CONFIG_SCB0_MI2_SLOT12, + CONFIG_SCB0_MI2_SLOT13, + CONFIG_SCB0_MI2_SLOT14, + CONFIG_SCB0_MI2_SLOT15, + CONFIG_SCB0_MI2_SLOT16, + CONFIG_SCB0_MI2_SLOT17, + CONFIG_SCB0_MI2_SLOT18, + CONFIG_SCB0_MI2_SLOT19, + CONFIG_SCB0_MI2_SLOT20, + CONFIG_SCB0_MI2_SLOT21, + CONFIG_SCB0_MI2_SLOT22, + CONFIG_SCB0_MI2_SLOT23, + CONFIG_SCB0_MI2_SLOT24, + CONFIG_SCB0_MI2_SLOT25, + CONFIG_SCB0_MI2_SLOT26, + CONFIG_SCB0_MI2_SLOT27, + CONFIG_SCB0_MI2_SLOT28, + CONFIG_SCB0_MI2_SLOT29, + CONFIG_SCB0_MI2_SLOT30, + CONFIG_SCB0_MI2_SLOT31 + }, + }, +#endif +#ifdef CONFIG_SCB0_MI3 + { REG_SCB0_ARBR3, REG_SCB0_ARBW3, 32, { + CONFIG_SCB0_MI3_SLOT0, + CONFIG_SCB0_MI3_SLOT1, + CONFIG_SCB0_MI3_SLOT2, + CONFIG_SCB0_MI3_SLOT3, + CONFIG_SCB0_MI3_SLOT4, + CONFIG_SCB0_MI3_SLOT5, + CONFIG_SCB0_MI3_SLOT6, + CONFIG_SCB0_MI3_SLOT7, + CONFIG_SCB0_MI3_SLOT8, + CONFIG_SCB0_MI3_SLOT9, + CONFIG_SCB0_MI3_SLOT10, + CONFIG_SCB0_MI3_SLOT11, + CONFIG_SCB0_MI3_SLOT12, + CONFIG_SCB0_MI3_SLOT13, + CONFIG_SCB0_MI3_SLOT14, + CONFIG_SCB0_MI3_SLOT15, + CONFIG_SCB0_MI3_SLOT16, + CONFIG_SCB0_MI3_SLOT17, + CONFIG_SCB0_MI3_SLOT18, + CONFIG_SCB0_MI3_SLOT19, + CONFIG_SCB0_MI3_SLOT20, + CONFIG_SCB0_MI3_SLOT21, + CONFIG_SCB0_MI3_SLOT22, + CONFIG_SCB0_MI3_SLOT23, + CONFIG_SCB0_MI3_SLOT24, + CONFIG_SCB0_MI3_SLOT25, + CONFIG_SCB0_MI3_SLOT26, + CONFIG_SCB0_MI3_SLOT27, + CONFIG_SCB0_MI3_SLOT28, + CONFIG_SCB0_MI3_SLOT29, + CONFIG_SCB0_MI3_SLOT30, + CONFIG_SCB0_MI3_SLOT31 + }, + }, +#endif +#ifdef CONFIG_SCB0_MI4 + { REG_SCB0_ARBR4, REG_SCB4_ARBW0, 32, { + CONFIG_SCB0_MI4_SLOT0, + CONFIG_SCB0_MI4_SLOT1, + CONFIG_SCB0_MI4_SLOT2, + CONFIG_SCB0_MI4_SLOT3, + CONFIG_SCB0_MI4_SLOT4, + CONFIG_SCB0_MI4_SLOT5, + CONFIG_SCB0_MI4_SLOT6, + CONFIG_SCB0_MI4_SLOT7, + CONFIG_SCB0_MI4_SLOT8, + CONFIG_SCB0_MI4_SLOT9, + CONFIG_SCB0_MI4_SLOT10, + CONFIG_SCB0_MI4_SLOT11, + CONFIG_SCB0_MI4_SLOT12, + CONFIG_SCB0_MI4_SLOT13, + CONFIG_SCB0_MI4_SLOT14, + CONFIG_SCB0_MI4_SLOT15, + CONFIG_SCB0_MI4_SLOT16, + CONFIG_SCB0_MI4_SLOT17, + CONFIG_SCB0_MI4_SLOT18, + CONFIG_SCB0_MI4_SLOT19, + CONFIG_SCB0_MI4_SLOT20, + CONFIG_SCB0_MI4_SLOT21, + CONFIG_SCB0_MI4_SLOT22, + CONFIG_SCB0_MI4_SLOT23, + CONFIG_SCB0_MI4_SLOT24, + CONFIG_SCB0_MI4_SLOT25, + CONFIG_SCB0_MI4_SLOT26, + CONFIG_SCB0_MI4_SLOT27, + CONFIG_SCB0_MI4_SLOT28, + CONFIG_SCB0_MI4_SLOT29, + CONFIG_SCB0_MI4_SLOT30, + CONFIG_SCB0_MI4_SLOT31 + }, + }, +#endif +#ifdef CONFIG_SCB0_MI5 + { REG_SCB0_ARBR5, REG_SCB0_ARBW5, 16, { + CONFIG_SCB0_MI5_SLOT0, + CONFIG_SCB0_MI5_SLOT1, + CONFIG_SCB0_MI5_SLOT2, + CONFIG_SCB0_MI5_SLOT3, + CONFIG_SCB0_MI5_SLOT4, + CONFIG_SCB0_MI5_SLOT5, + CONFIG_SCB0_MI5_SLOT6, + CONFIG_SCB0_MI5_SLOT7, + CONFIG_SCB0_MI5_SLOT8, + CONFIG_SCB0_MI5_SLOT9, + CONFIG_SCB0_MI5_SLOT10, + CONFIG_SCB0_MI5_SLOT11, + CONFIG_SCB0_MI5_SLOT12, + CONFIG_SCB0_MI5_SLOT13, + CONFIG_SCB0_MI5_SLOT14, + CONFIG_SCB0_MI5_SLOT15 + }, + }, +#endif +#ifdef CONFIG_SCB1_MI0 + { REG_SCB1_ARBR0, REG_SCB1_ARBW0, 20, { + CONFIG_SCB1_MI0_SLOT0, + CONFIG_SCB1_MI0_SLOT1, + CONFIG_SCB1_MI0_SLOT2, + CONFIG_SCB1_MI0_SLOT3, + CONFIG_SCB1_MI0_SLOT4, + CONFIG_SCB1_MI0_SLOT5, + CONFIG_SCB1_MI0_SLOT6, + CONFIG_SCB1_MI0_SLOT7, + CONFIG_SCB1_MI0_SLOT8, + CONFIG_SCB1_MI0_SLOT9, + CONFIG_SCB1_MI0_SLOT10, + CONFIG_SCB1_MI0_SLOT11, + CONFIG_SCB1_MI0_SLOT12, + CONFIG_SCB1_MI0_SLOT13, + CONFIG_SCB1_MI0_SLOT14, + CONFIG_SCB1_MI0_SLOT15, + CONFIG_SCB1_MI0_SLOT16, + CONFIG_SCB1_MI0_SLOT17, + CONFIG_SCB1_MI0_SLOT18, + CONFIG_SCB1_MI0_SLOT19 + }, + }, +#endif +#ifdef CONFIG_SCB2_MI0 + { REG_SCB2_ARBR0, REG_SCB2_ARBW0, 10, { + CONFIG_SCB2_MI0_SLOT0, + CONFIG_SCB2_MI0_SLOT1, + CONFIG_SCB2_MI0_SLOT2, + CONFIG_SCB2_MI0_SLOT3, + CONFIG_SCB2_MI0_SLOT4, + CONFIG_SCB2_MI0_SLOT5, + CONFIG_SCB2_MI0_SLOT6, + CONFIG_SCB2_MI0_SLOT7, + CONFIG_SCB2_MI0_SLOT8, + CONFIG_SCB2_MI0_SLOT9 + }, + }, +#endif +#ifdef CONFIG_SCB3_MI0 + { REG_SCB3_ARBR0, REG_SCB3_ARBW0, 16, { + CONFIG_SCB3_MI0_SLOT0, + CONFIG_SCB3_MI0_SLOT1, + CONFIG_SCB3_MI0_SLOT2, + CONFIG_SCB3_MI0_SLOT3, + CONFIG_SCB3_MI0_SLOT4, + CONFIG_SCB3_MI0_SLOT5, + CONFIG_SCB3_MI0_SLOT6, + CONFIG_SCB3_MI0_SLOT7, + CONFIG_SCB3_MI0_SLOT8, + CONFIG_SCB3_MI0_SLOT9, + CONFIG_SCB3_MI0_SLOT10, + CONFIG_SCB3_MI0_SLOT11, + CONFIG_SCB3_MI0_SLOT12, + CONFIG_SCB3_MI0_SLOT13, + CONFIG_SCB3_MI0_SLOT14, + CONFIG_SCB3_MI0_SLOT15 + }, + }, +#endif +#ifdef CONFIG_SCB4_MI0 + { REG_SCB4_ARBR0, REG_SCB4_ARBW0, 16, { + CONFIG_SCB4_MI0_SLOT0, + CONFIG_SCB4_MI0_SLOT1, + CONFIG_SCB4_MI0_SLOT2, + CONFIG_SCB4_MI0_SLOT3, + CONFIG_SCB4_MI0_SLOT4, + CONFIG_SCB4_MI0_SLOT5, + CONFIG_SCB4_MI0_SLOT6, + CONFIG_SCB4_MI0_SLOT7, + CONFIG_SCB4_MI0_SLOT8, + CONFIG_SCB4_MI0_SLOT9, + CONFIG_SCB4_MI0_SLOT10, + CONFIG_SCB4_MI0_SLOT11, + CONFIG_SCB4_MI0_SLOT12, + CONFIG_SCB4_MI0_SLOT13, + CONFIG_SCB4_MI0_SLOT14, + CONFIG_SCB4_MI0_SLOT15 + }, + }, +#endif +#ifdef CONFIG_SCB5_MI0 + { REG_SCB5_ARBR0, REG_SCB5_ARBW0, 8, { + CONFIG_SCB5_MI0_SLOT0, + CONFIG_SCB5_MI0_SLOT1, + CONFIG_SCB5_MI0_SLOT2, + CONFIG_SCB5_MI0_SLOT3, + CONFIG_SCB5_MI0_SLOT4, + CONFIG_SCB5_MI0_SLOT5, + CONFIG_SCB5_MI0_SLOT6, + CONFIG_SCB5_MI0_SLOT7 + }, + }, +#endif +#ifdef CONFIG_SCB6_MI0 + { REG_SCB6_ARBR0, REG_SCB6_ARBW0, 4, { + CONFIG_SCB6_MI0_SLOT0, + CONFIG_SCB6_MI0_SLOT1, + CONFIG_SCB6_MI0_SLOT2, + CONFIG_SCB6_MI0_SLOT3 + }, + }, +#endif +#ifdef CONFIG_SCB7_MI0 + { REG_SCB7_ARBR0, REG_SCB7_ARBW0, 6, { + CONFIG_SCB7_MI0_SLOT0, + CONFIG_SCB7_MI0_SLOT1, + CONFIG_SCB7_MI0_SLOT2, + CONFIG_SCB7_MI0_SLOT3, + CONFIG_SCB7_MI0_SLOT4, + CONFIG_SCB7_MI0_SLOT5 + }, + }, +#endif +#ifdef CONFIG_SCB8_MI0 + { REG_SCB8_ARBR0, REG_SCB8_ARBW0, 8, { + CONFIG_SCB8_MI0_SLOT0, + CONFIG_SCB8_MI0_SLOT1, + CONFIG_SCB8_MI0_SLOT2, + CONFIG_SCB8_MI0_SLOT3, + CONFIG_SCB8_MI0_SLOT4, + CONFIG_SCB8_MI0_SLOT5, + CONFIG_SCB8_MI0_SLOT6, + CONFIG_SCB8_MI0_SLOT7 + }, + }, +#endif +#ifdef CONFIG_SCB9_MI0 + { REG_SCB9_ARBR0, REG_SCB9_ARBW0, 10, { + CONFIG_SCB9_MI0_SLOT0, + CONFIG_SCB9_MI0_SLOT1, + CONFIG_SCB9_MI0_SLOT2, + CONFIG_SCB9_MI0_SLOT3, + CONFIG_SCB9_MI0_SLOT4, + CONFIG_SCB9_MI0_SLOT5, + CONFIG_SCB9_MI0_SLOT6, + CONFIG_SCB9_MI0_SLOT7, + CONFIG_SCB9_MI0_SLOT8, + CONFIG_SCB9_MI0_SLOT9 + }, + }, +#endif + { 0, } +}; diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile index ff299f24aba..f0997920404 100644 --- a/arch/blackfin/mach-common/Makefile +++ b/arch/blackfin/mach-common/Makefile @@ -6,8 +6,11 @@ obj-y := \ cache.o cache-c.o entry.o head.o \ interrupt.o arch_checks.o ints-priority.o -obj-$(CONFIG_PM) += pm.o dpmc_modes.o -obj-$(CONFIG_CPU_FREQ) += cpufreq.o +obj-$(CONFIG_PM) += pm.o +ifneq ($(CONFIG_BF60x),y) +obj-$(CONFIG_PM) += dpmc_modes.o +endif +obj-$(CONFIG_SCB_PRIORITY) += scb-init.o obj-$(CONFIG_CPU_VOLTAGE) += dpmc.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_BFIN_KERNEL_CLOCK) += clocks-init.o diff --git a/arch/blackfin/mach-common/cache-c.c b/arch/blackfin/mach-common/cache-c.c index a60a24f5035..f4adedc9289 100644 --- a/arch/blackfin/mach-common/cache-c.c +++ b/arch/blackfin/mach-common/cache-c.c @@ -6,7 +6,6 @@ * Licensed under the GPL-2 or later. */ -#include <linux/init.h> #include <asm/blackfin.h> #include <asm/cplbinit.h> @@ -42,6 +41,16 @@ bfin_cache_init(struct cplb_entry *cplb_tbl, unsigned long cplb_addr, unsigned long mem_mask) { int i; +#ifdef CONFIG_L1_PARITY_CHECK + u32 ctrl; + + if (cplb_addr == DCPLB_ADDR0) { + ctrl = bfin_read32(mem_control) | (1 << RDCHK); + CSYNC(); + bfin_write32(mem_control, ctrl); + SSYNC(); + } +#endif for (i = 0; i < MAX_CPLBS; i++) { bfin_write32(cplb_addr + i * 4, cplb_tbl[i].addr); @@ -52,7 +61,7 @@ bfin_cache_init(struct cplb_entry *cplb_tbl, unsigned long cplb_addr, } #ifdef CONFIG_BFIN_ICACHE -void __cpuinit bfin_icache_init(struct cplb_entry *icplb_tbl) +void bfin_icache_init(struct cplb_entry *icplb_tbl) { bfin_cache_init(icplb_tbl, ICPLB_ADDR0, ICPLB_DATA0, IMEM_CONTROL, (IMC | ENICPLB)); @@ -60,7 +69,7 @@ void __cpuinit bfin_icache_init(struct cplb_entry *icplb_tbl) #endif #ifdef CONFIG_BFIN_DCACHE -void __cpuinit bfin_dcache_init(struct cplb_entry *dcplb_tbl) +void bfin_dcache_init(struct cplb_entry *dcplb_tbl) { /* * Anomaly notes: diff --git a/arch/blackfin/mach-common/clock.h b/arch/blackfin/mach-common/clock.h new file mode 100644 index 00000000000..645ff460a1f --- /dev/null +++ b/arch/blackfin/mach-common/clock.h @@ -0,0 +1,27 @@ +#ifndef __MACH_COMMON_CLKDEV_H +#define __MACH_COMMON_CLKDEV_H + +#include <linux/clk.h> + +struct clk_ops { + unsigned long (*get_rate)(struct clk *clk); + unsigned long (*round_rate)(struct clk *clk, unsigned long rate); + int (*set_rate)(struct clk *clk, unsigned long rate); + int (*enable)(struct clk *clk); + int (*disable)(struct clk *clk); +}; + +struct clk { + const char *name; + unsigned long rate; + spinlock_t lock; + u32 flags; + const struct clk_ops *ops; + const struct params *params; + void __iomem *reg; + u32 mask; + u32 shift; +}; + +#endif + diff --git a/arch/blackfin/mach-common/clocks-init.c b/arch/blackfin/mach-common/clocks-init.c index d5cfe611b77..d436bd907fc 100644 --- a/arch/blackfin/mach-common/clocks-init.c +++ b/arch/blackfin/mach-common/clocks-init.c @@ -7,7 +7,6 @@ */ #include <linux/linkage.h> -#include <linux/init.h> #include <asm/blackfin.h> #include <asm/dma.h> @@ -15,10 +14,30 @@ #include <asm/mem_init.h> #include <asm/dpmc.h> +#ifdef CONFIG_BF60x + +#define CGU_CTL_VAL ((CONFIG_VCO_MULT << 8) | CLKIN_HALF) +#define CGU_DIV_VAL \ + ((CONFIG_CCLK_DIV << CSEL_OFFSET) | \ + (CONFIG_SCLK_DIV << SYSSEL_OFFSET) | \ + (CONFIG_SCLK0_DIV << S0SEL_OFFSET) | \ + (CONFIG_SCLK1_DIV << S1SEL_OFFSET) | \ + (CONFIG_DCLK_DIV << DSEL_OFFSET)) + +#define CONFIG_BFIN_DCLK (((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) / CONFIG_DCLK_DIV) / 1000000) +#if ((CONFIG_BFIN_DCLK != 125) && \ + (CONFIG_BFIN_DCLK != 133) && (CONFIG_BFIN_DCLK != 150) && \ + (CONFIG_BFIN_DCLK != 166) && (CONFIG_BFIN_DCLK != 200) && \ + (CONFIG_BFIN_DCLK != 225) && (CONFIG_BFIN_DCLK != 250)) +#error "DCLK must be in (125, 133, 150, 166, 200, 225, 250)MHz" +#endif + +#else #define SDGCTL_WIDTH (1 << 31) /* SDRAM external data path width */ #define PLL_CTL_VAL \ (((CONFIG_VCO_MULT & 63) << 9) | CLKIN_HALF | \ - (PLL_BYPASS << 8) | (ANOMALY_05000305 ? 0 : 0x8000)) + (PLL_BYPASS << 8) | (ANOMALY_05000305 ? 0 : 0x8000)) +#endif __attribute__((l1_text)) static void do_sync(void) @@ -33,6 +52,10 @@ void init_clocks(void) * in the middle of reprogramming things, and that'll screw us up. * For example, any automatic DMAs left by U-Boot for splash screens. */ +#ifdef CONFIG_BF60x + init_cgu(CGU_DIV_VAL, CGU_CTL_VAL); + init_dmc(CONFIG_BFIN_DCLK); +#else size_t i; for (i = 0; i < MAX_DMA_CHANNELS; ++i) { struct dma_register *dma = dma_io_base_addr[i]; @@ -91,6 +114,8 @@ void init_clocks(void) bfin_write_EBIU_DDRQUE(CONFIG_MEM_EBIU_DDRQUE); #endif #endif +#endif do_sync(); bfin_read16(0); + } diff --git a/arch/blackfin/mach-common/cpufreq.c b/arch/blackfin/mach-common/cpufreq.c deleted file mode 100644 index 2e6eefd812f..00000000000 --- a/arch/blackfin/mach-common/cpufreq.c +++ /dev/null @@ -1,220 +0,0 @@ -/* - * Blackfin core clock scaling - * - * Copyright 2008-2011 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/fs.h> -#include <linux/delay.h> -#include <asm/blackfin.h> -#include <asm/time.h> -#include <asm/dpmc.h> - -/* this is the table of CCLK frequencies, in Hz */ -/* .index is the entry in the auxiliary dpm_state_table[] */ -static struct cpufreq_frequency_table bfin_freq_table[] = { - { - .frequency = CPUFREQ_TABLE_END, - .index = 0, - }, - { - .frequency = CPUFREQ_TABLE_END, - .index = 1, - }, - { - .frequency = CPUFREQ_TABLE_END, - .index = 2, - }, - { - .frequency = CPUFREQ_TABLE_END, - .index = 0, - }, -}; - -static struct bfin_dpm_state { - unsigned int csel; /* system clock divider */ - unsigned int tscale; /* change the divider on the core timer interrupt */ -} dpm_state_table[3]; - -#if defined(CONFIG_CYCLES_CLOCKSOURCE) -/* - * normalized to maximum frequency offset for CYCLES, - * used in time-ts cycles clock source, but could be used - * somewhere also. - */ -unsigned long long __bfin_cycles_off; -unsigned int __bfin_cycles_mod; -#endif - -/**************************************************************************/ -static void __init bfin_init_tables(unsigned long cclk, unsigned long sclk) -{ - - unsigned long csel, min_cclk; - int index; - - /* Anomaly 273 seems to still exist on non-BF54x w/dcache turned on */ -#if ANOMALY_05000273 || ANOMALY_05000274 || \ - (!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_EXTMEM_DCACHEABLE)) - min_cclk = sclk * 2; -#else - min_cclk = sclk; -#endif - csel = ((bfin_read_PLL_DIV() & CSEL) >> 4); - - for (index = 0; (cclk >> index) >= min_cclk && csel <= 3; index++, csel++) { - bfin_freq_table[index].frequency = cclk >> index; - dpm_state_table[index].csel = csel << 4; /* Shift now into PLL_DIV bitpos */ - dpm_state_table[index].tscale = (TIME_SCALE / (1 << csel)) - 1; - - pr_debug("cpufreq: freq:%d csel:0x%x tscale:%d\n", - bfin_freq_table[index].frequency, - dpm_state_table[index].csel, - dpm_state_table[index].tscale); - } - return; -} - -static void bfin_adjust_core_timer(void *info) -{ - unsigned int tscale; - unsigned int index = *(unsigned int *)info; - - /* we have to adjust the core timer, because it is using cclk */ - tscale = dpm_state_table[index].tscale; - bfin_write_TSCALE(tscale); - return; -} - -static unsigned int bfin_getfreq_khz(unsigned int cpu) -{ - /* Both CoreA/B have the same core clock */ - return get_cclk() / 1000; -} - -static int bfin_target(struct cpufreq_policy *poli, - unsigned int target_freq, unsigned int relation) -{ - unsigned int index, plldiv, cpu; - unsigned long flags, cclk_hz; - struct cpufreq_freqs freqs; - static unsigned long lpj_ref; - static unsigned int lpj_ref_freq; - -#if defined(CONFIG_CYCLES_CLOCKSOURCE) - cycles_t cycles; -#endif - - for_each_online_cpu(cpu) { - struct cpufreq_policy *policy = cpufreq_cpu_get(cpu); - - if (!policy) - continue; - - if (cpufreq_frequency_table_target(policy, bfin_freq_table, - target_freq, relation, &index)) - return -EINVAL; - - cclk_hz = bfin_freq_table[index].frequency; - - freqs.old = bfin_getfreq_khz(0); - freqs.new = cclk_hz; - freqs.cpu = cpu; - - pr_debug("cpufreq: changing cclk to %lu; target = %u, oldfreq = %u\n", - cclk_hz, target_freq, freqs.old); - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - if (cpu == CPUFREQ_CPU) { - flags = hard_local_irq_save(); - plldiv = (bfin_read_PLL_DIV() & SSEL) | - dpm_state_table[index].csel; - bfin_write_PLL_DIV(plldiv); - on_each_cpu(bfin_adjust_core_timer, &index, 1); -#if defined(CONFIG_CYCLES_CLOCKSOURCE) - cycles = get_cycles(); - SSYNC(); - cycles += 10; /* ~10 cycles we lose after get_cycles() */ - __bfin_cycles_off += - (cycles << __bfin_cycles_mod) - (cycles << index); - __bfin_cycles_mod = index; -#endif - if (!lpj_ref_freq) { - lpj_ref = loops_per_jiffy; - lpj_ref_freq = freqs.old; - } - if (freqs.new != freqs.old) { - loops_per_jiffy = cpufreq_scale(lpj_ref, - lpj_ref_freq, freqs.new); - } - hard_local_irq_restore(flags); - } - /* TODO: just test case for cycles clock source, remove later */ - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - } - - pr_debug("cpufreq: done\n"); - return 0; -} - -static int bfin_verify_speed(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, bfin_freq_table); -} - -static int __init __bfin_cpu_init(struct cpufreq_policy *policy) -{ - - unsigned long cclk, sclk; - - cclk = get_cclk() / 1000; - sclk = get_sclk() / 1000; - - if (policy->cpu == CPUFREQ_CPU) - bfin_init_tables(cclk, sclk); - - policy->cpuinfo.transition_latency = 50000; /* 50us assumed */ - - policy->cur = cclk; - cpufreq_frequency_table_get_attr(bfin_freq_table, policy->cpu); - return cpufreq_frequency_table_cpuinfo(policy, bfin_freq_table); -} - -static struct freq_attr *bfin_freq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver bfin_driver = { - .verify = bfin_verify_speed, - .target = bfin_target, - .get = bfin_getfreq_khz, - .init = __bfin_cpu_init, - .name = "bfin cpufreq", - .owner = THIS_MODULE, - .attr = bfin_freq_attr, -}; - -static int __init bfin_cpu_init(void) -{ - return cpufreq_register_driver(&bfin_driver); -} - -static void __exit bfin_cpu_exit(void) -{ - cpufreq_unregister_driver(&bfin_driver); -} - -MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); -MODULE_DESCRIPTION("cpufreq driver for Blackfin"); -MODULE_LICENSE("GPL"); - -module_init(bfin_cpu_init); -module_exit(bfin_cpu_exit); diff --git a/arch/blackfin/mach-common/dpmc.c b/arch/blackfin/mach-common/dpmc.c index f5685a496c5..724a8c5f557 100644 --- a/arch/blackfin/mach-common/dpmc.c +++ b/arch/blackfin/mach-common/dpmc.c @@ -129,7 +129,7 @@ static struct notifier_block vreg_cpufreq_notifier_block = { * bfin_dpmc_probe - * */ -static int __devinit bfin_dpmc_probe(struct platform_device *pdev) +static int bfin_dpmc_probe(struct platform_device *pdev) { if (pdev->dev.platform_data) pdata = pdev->dev.platform_data; @@ -143,7 +143,7 @@ static int __devinit bfin_dpmc_probe(struct platform_device *pdev) /** * bfin_dpmc_remove - */ -static int __devexit bfin_dpmc_remove(struct platform_device *pdev) +static int bfin_dpmc_remove(struct platform_device *pdev) { pdata = NULL; return cpufreq_unregister_notifier(&vreg_cpufreq_notifier_block, @@ -152,29 +152,12 @@ static int __devexit bfin_dpmc_remove(struct platform_device *pdev) struct platform_driver bfin_dpmc_device_driver = { .probe = bfin_dpmc_probe, - .remove = __devexit_p(bfin_dpmc_remove), + .remove = bfin_dpmc_remove, .driver = { .name = DRIVER_NAME, } }; - -/** - * bfin_dpmc_init - Init driver - */ -static int __init bfin_dpmc_init(void) -{ - return platform_driver_register(&bfin_dpmc_device_driver); -} -module_init(bfin_dpmc_init); - -/** - * bfin_dpmc_exit - break down driver - */ -static void __exit bfin_dpmc_exit(void) -{ - platform_driver_unregister(&bfin_dpmc_device_driver); -} -module_exit(bfin_dpmc_exit); +module_platform_driver(bfin_dpmc_device_driver); MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); MODULE_DESCRIPTION("cpu power management driver for Blackfin"); diff --git a/arch/blackfin/mach-common/dpmc_modes.S b/arch/blackfin/mach-common/dpmc_modes.S index 1c534d298de..de99f3aac2c 100644 --- a/arch/blackfin/mach-common/dpmc_modes.S +++ b/arch/blackfin/mach-common/dpmc_modes.S @@ -10,7 +10,6 @@ #include <asm/dpmc.h> .section .l1.text - ENTRY(_sleep_mode) [--SP] = (R7:4, P5:3); [--SP] = RETS; @@ -43,6 +42,9 @@ ENTRY(_sleep_mode) BITCLR (R7, 5); w[p0] = R7.L; IDLE; + + bfin_init_pm_bench_cycles; + call _test_pll_locked; RETS = [SP++]; @@ -58,12 +60,13 @@ ENDPROC(_sleep_mode) * * We accept just one argument -- the value to write to VR_CTL. */ + ENTRY(_hibernate_mode) /* Save/setup the regs we need early for minor pipeline optimization */ R4 = R0; + P3.H = hi(VR_CTL); P3.L = lo(VR_CTL); - /* Disable all wakeup sources */ R0 = IWR_DISABLE_ALL; R1 = IWR_DISABLE_ALL; @@ -74,6 +77,9 @@ ENTRY(_hibernate_mode) /* Finally, we climb into our cave to hibernate */ W[P3] = R4.L; + + bfin_init_pm_bench_cycles; + CLI R2; IDLE; .Lforever: @@ -158,6 +164,8 @@ ENTRY(_sleep_deeper) SSYNC; IDLE; + bfin_init_pm_bench_cycles; + call _test_pll_locked; P0.H = hi(PLL_DIV); @@ -276,327 +284,10 @@ ENTRY(_test_pll_locked) ENDPROC(_test_pll_locked) .section .text - -#define PM_REG0 R7 -#define PM_REG1 R6 -#define PM_REG2 R5 -#define PM_REG3 R4 -#define PM_REG4 R3 -#define PM_REG5 R2 -#define PM_REG6 R1 -#define PM_REG7 R0 -#define PM_REG8 P5 -#define PM_REG9 P4 -#define PM_REG10 P3 -#define PM_REG11 P2 -#define PM_REG12 P1 -#define PM_REG13 P0 - -#define PM_REGSET0 R7:7 -#define PM_REGSET1 R7:6 -#define PM_REGSET2 R7:5 -#define PM_REGSET3 R7:4 -#define PM_REGSET4 R7:3 -#define PM_REGSET5 R7:2 -#define PM_REGSET6 R7:1 -#define PM_REGSET7 R7:0 -#define PM_REGSET8 R7:0, P5:5 -#define PM_REGSET9 R7:0, P5:4 -#define PM_REGSET10 R7:0, P5:3 -#define PM_REGSET11 R7:0, P5:2 -#define PM_REGSET12 R7:0, P5:1 -#define PM_REGSET13 R7:0, P5:0 - -#define _PM_PUSH(n, x, w, base) PM_REG##n = w[FP + ((x) - (base))]; -#define _PM_POP(n, x, w, base) w[FP + ((x) - (base))] = PM_REG##n; -#define PM_PUSH_SYNC(n) [--sp] = (PM_REGSET##n); -#define PM_POP_SYNC(n) (PM_REGSET##n) = [sp++]; -#define PM_PUSH(n, x) PM_REG##n = [FP++]; -#define PM_POP(n, x) [FP--] = PM_REG##n; -#define PM_CORE_PUSH(n, x) _PM_PUSH(n, x, , COREMMR_BASE) -#define PM_CORE_POP(n, x) _PM_POP(n, x, , COREMMR_BASE) -#define PM_SYS_PUSH(n, x) _PM_PUSH(n, x, , SYSMMR_BASE) -#define PM_SYS_POP(n, x) _PM_POP(n, x, , SYSMMR_BASE) -#define PM_SYS_PUSH16(n, x) _PM_PUSH(n, x, w, SYSMMR_BASE) -#define PM_SYS_POP16(n, x) _PM_POP(n, x, w, SYSMMR_BASE) - ENTRY(_do_hibernate) - /* - * Save the core regs early so we can blow them away when - * saving/restoring MMR states - */ - [--sp] = (R7:0, P5:0); - [--sp] = fp; - [--sp] = usp; - - [--sp] = i0; - [--sp] = i1; - [--sp] = i2; - [--sp] = i3; - - [--sp] = m0; - [--sp] = m1; - [--sp] = m2; - [--sp] = m3; - - [--sp] = l0; - [--sp] = l1; - [--sp] = l2; - [--sp] = l3; - - [--sp] = b0; - [--sp] = b1; - [--sp] = b2; - [--sp] = b3; - [--sp] = a0.x; - [--sp] = a0.w; - [--sp] = a1.x; - [--sp] = a1.w; - - [--sp] = LC0; - [--sp] = LC1; - [--sp] = LT0; - [--sp] = LT1; - [--sp] = LB0; - [--sp] = LB1; - - /* We can't push RETI directly as that'll change IPEND[4] */ - r7 = RETI; - [--sp] = RETS; - [--sp] = ASTAT; - [--sp] = CYCLES; - [--sp] = CYCLES2; - [--sp] = SYSCFG; - [--sp] = RETX; - [--sp] = SEQSTAT; - [--sp] = r7; - - /* Save first func arg in M3 */ - M3 = R0; - - /* Save system MMRs */ - FP.H = hi(SYSMMR_BASE); - FP.L = lo(SYSMMR_BASE); - -#ifdef SIC_IMASK0 - PM_SYS_PUSH(0, SIC_IMASK0) - PM_SYS_PUSH(1, SIC_IMASK1) -# ifdef SIC_IMASK2 - PM_SYS_PUSH(2, SIC_IMASK2) -# endif -#else - PM_SYS_PUSH(0, SIC_IMASK) -#endif -#ifdef SIC_IAR0 - PM_SYS_PUSH(3, SIC_IAR0) - PM_SYS_PUSH(4, SIC_IAR1) - PM_SYS_PUSH(5, SIC_IAR2) -#endif -#ifdef SIC_IAR3 - PM_SYS_PUSH(6, SIC_IAR3) -#endif -#ifdef SIC_IAR4 - PM_SYS_PUSH(7, SIC_IAR4) - PM_SYS_PUSH(8, SIC_IAR5) - PM_SYS_PUSH(9, SIC_IAR6) -#endif -#ifdef SIC_IAR7 - PM_SYS_PUSH(10, SIC_IAR7) -#endif -#ifdef SIC_IAR8 - PM_SYS_PUSH(11, SIC_IAR8) - PM_SYS_PUSH(12, SIC_IAR9) - PM_SYS_PUSH(13, SIC_IAR10) -#endif - PM_PUSH_SYNC(13) -#ifdef SIC_IAR11 - PM_SYS_PUSH(0, SIC_IAR11) -#endif - -#ifdef SIC_IWR - PM_SYS_PUSH(1, SIC_IWR) -#endif -#ifdef SIC_IWR0 - PM_SYS_PUSH(1, SIC_IWR0) -#endif -#ifdef SIC_IWR1 - PM_SYS_PUSH(2, SIC_IWR1) -#endif -#ifdef SIC_IWR2 - PM_SYS_PUSH(3, SIC_IWR2) -#endif - -#ifdef PINT0_ASSIGN - PM_SYS_PUSH(4, PINT0_MASK_SET) - PM_SYS_PUSH(5, PINT1_MASK_SET) - PM_SYS_PUSH(6, PINT2_MASK_SET) - PM_SYS_PUSH(7, PINT3_MASK_SET) - PM_SYS_PUSH(8, PINT0_ASSIGN) - PM_SYS_PUSH(9, PINT1_ASSIGN) - PM_SYS_PUSH(10, PINT2_ASSIGN) - PM_SYS_PUSH(11, PINT3_ASSIGN) - PM_SYS_PUSH(12, PINT0_INVERT_SET) - PM_SYS_PUSH(13, PINT1_INVERT_SET) - PM_PUSH_SYNC(13) - PM_SYS_PUSH(0, PINT2_INVERT_SET) - PM_SYS_PUSH(1, PINT3_INVERT_SET) - PM_SYS_PUSH(2, PINT0_EDGE_SET) - PM_SYS_PUSH(3, PINT1_EDGE_SET) - PM_SYS_PUSH(4, PINT2_EDGE_SET) - PM_SYS_PUSH(5, PINT3_EDGE_SET) -#endif - - PM_SYS_PUSH16(6, SYSCR) - - PM_SYS_PUSH16(7, EBIU_AMGCTL) - PM_SYS_PUSH(8, EBIU_AMBCTL0) - PM_SYS_PUSH(9, EBIU_AMBCTL1) -#ifdef EBIU_FCTL - PM_SYS_PUSH(10, EBIU_MBSCTL) - PM_SYS_PUSH(11, EBIU_MODE) - PM_SYS_PUSH(12, EBIU_FCTL) - PM_PUSH_SYNC(12) -#else - PM_PUSH_SYNC(9) -#endif - - /* Save Core MMRs */ - I0.H = hi(COREMMR_BASE); - I0.L = lo(COREMMR_BASE); - I1 = I0; - I2 = I0; - I3 = I0; - B0 = I0; - B1 = I0; - B2 = I0; - B3 = I0; - I1.L = lo(DCPLB_ADDR0); - I2.L = lo(DCPLB_DATA0); - I3.L = lo(ICPLB_ADDR0); - B0.L = lo(ICPLB_DATA0); - B1.L = lo(EVT2); - B2.L = lo(IMASK); - B3.L = lo(TCNTL); - - /* DCPLB Addr */ - FP = I1; - PM_PUSH(0, DCPLB_ADDR0) - PM_PUSH(1, DCPLB_ADDR1) - PM_PUSH(2, DCPLB_ADDR2) - PM_PUSH(3, DCPLB_ADDR3) - PM_PUSH(4, DCPLB_ADDR4) - PM_PUSH(5, DCPLB_ADDR5) - PM_PUSH(6, DCPLB_ADDR6) - PM_PUSH(7, DCPLB_ADDR7) - PM_PUSH(8, DCPLB_ADDR8) - PM_PUSH(9, DCPLB_ADDR9) - PM_PUSH(10, DCPLB_ADDR10) - PM_PUSH(11, DCPLB_ADDR11) - PM_PUSH(12, DCPLB_ADDR12) - PM_PUSH(13, DCPLB_ADDR13) - PM_PUSH_SYNC(13) - PM_PUSH(0, DCPLB_ADDR14) - PM_PUSH(1, DCPLB_ADDR15) - - /* DCPLB Data */ - FP = I2; - PM_PUSH(2, DCPLB_DATA0) - PM_PUSH(3, DCPLB_DATA1) - PM_PUSH(4, DCPLB_DATA2) - PM_PUSH(5, DCPLB_DATA3) - PM_PUSH(6, DCPLB_DATA4) - PM_PUSH(7, DCPLB_DATA5) - PM_PUSH(8, DCPLB_DATA6) - PM_PUSH(9, DCPLB_DATA7) - PM_PUSH(10, DCPLB_DATA8) - PM_PUSH(11, DCPLB_DATA9) - PM_PUSH(12, DCPLB_DATA10) - PM_PUSH(13, DCPLB_DATA11) - PM_PUSH_SYNC(13) - PM_PUSH(0, DCPLB_DATA12) - PM_PUSH(1, DCPLB_DATA13) - PM_PUSH(2, DCPLB_DATA14) - PM_PUSH(3, DCPLB_DATA15) - - /* ICPLB Addr */ - FP = I3; - PM_PUSH(4, ICPLB_ADDR0) - PM_PUSH(5, ICPLB_ADDR1) - PM_PUSH(6, ICPLB_ADDR2) - PM_PUSH(7, ICPLB_ADDR3) - PM_PUSH(8, ICPLB_ADDR4) - PM_PUSH(9, ICPLB_ADDR5) - PM_PUSH(10, ICPLB_ADDR6) - PM_PUSH(11, ICPLB_ADDR7) - PM_PUSH(12, ICPLB_ADDR8) - PM_PUSH(13, ICPLB_ADDR9) - PM_PUSH_SYNC(13) - PM_PUSH(0, ICPLB_ADDR10) - PM_PUSH(1, ICPLB_ADDR11) - PM_PUSH(2, ICPLB_ADDR12) - PM_PUSH(3, ICPLB_ADDR13) - PM_PUSH(4, ICPLB_ADDR14) - PM_PUSH(5, ICPLB_ADDR15) - - /* ICPLB Data */ - FP = B0; - PM_PUSH(6, ICPLB_DATA0) - PM_PUSH(7, ICPLB_DATA1) - PM_PUSH(8, ICPLB_DATA2) - PM_PUSH(9, ICPLB_DATA3) - PM_PUSH(10, ICPLB_DATA4) - PM_PUSH(11, ICPLB_DATA5) - PM_PUSH(12, ICPLB_DATA6) - PM_PUSH(13, ICPLB_DATA7) - PM_PUSH_SYNC(13) - PM_PUSH(0, ICPLB_DATA8) - PM_PUSH(1, ICPLB_DATA9) - PM_PUSH(2, ICPLB_DATA10) - PM_PUSH(3, ICPLB_DATA11) - PM_PUSH(4, ICPLB_DATA12) - PM_PUSH(5, ICPLB_DATA13) - PM_PUSH(6, ICPLB_DATA14) - PM_PUSH(7, ICPLB_DATA15) - - /* Event Vectors */ - FP = B1; - PM_PUSH(8, EVT2) - PM_PUSH(9, EVT3) - FP += 4; /* EVT4 */ - PM_PUSH(10, EVT5) - PM_PUSH(11, EVT6) - PM_PUSH(12, EVT7) - PM_PUSH(13, EVT8) - PM_PUSH_SYNC(13) - PM_PUSH(0, EVT9) - PM_PUSH(1, EVT10) - PM_PUSH(2, EVT11) - PM_PUSH(3, EVT12) - PM_PUSH(4, EVT13) - PM_PUSH(5, EVT14) - PM_PUSH(6, EVT15) - - /* CEC */ - FP = B2; - PM_PUSH(7, IMASK) - FP += 4; /* IPEND */ - PM_PUSH(8, ILAT) - PM_PUSH(9, IPRIO) - - /* Core Timer */ - FP = B3; - PM_PUSH(10, TCNTL) - PM_PUSH(11, TPERIOD) - PM_PUSH(12, TSCALE) - PM_PUSH(13, TCOUNT) - PM_PUSH_SYNC(13) - - /* Misc non-contiguous registers */ - FP = I0; - PM_CORE_PUSH(0, DMEM_CONTROL); - PM_CORE_PUSH(1, IMEM_CONTROL); - PM_CORE_PUSH(2, TBUFCTL); - PM_PUSH_SYNC(2) + bfin_cpu_reg_save; + bfin_sys_mmr_save; + bfin_core_mmr_save; /* Setup args to hibernate mode early for pipeline optimization */ R0 = M3; @@ -618,274 +309,9 @@ ENTRY(_do_hibernate) .Lpm_resume_here: - /* Restore Core MMRs */ - I0.H = hi(COREMMR_BASE); - I0.L = lo(COREMMR_BASE); - I1 = I0; - I2 = I0; - I3 = I0; - B0 = I0; - B1 = I0; - B2 = I0; - B3 = I0; - I1.L = lo(DCPLB_ADDR15); - I2.L = lo(DCPLB_DATA15); - I3.L = lo(ICPLB_ADDR15); - B0.L = lo(ICPLB_DATA15); - B1.L = lo(EVT15); - B2.L = lo(IPRIO); - B3.L = lo(TCOUNT); - - /* Misc non-contiguous registers */ - FP = I0; - PM_POP_SYNC(2) - PM_CORE_POP(2, TBUFCTL) - PM_CORE_POP(1, IMEM_CONTROL) - PM_CORE_POP(0, DMEM_CONTROL) - - /* Core Timer */ - PM_POP_SYNC(13) - FP = B3; - PM_POP(13, TCOUNT) - PM_POP(12, TSCALE) - PM_POP(11, TPERIOD) - PM_POP(10, TCNTL) - - /* CEC */ - FP = B2; - PM_POP(9, IPRIO) - PM_POP(8, ILAT) - FP += -4; /* IPEND */ - PM_POP(7, IMASK) - - /* Event Vectors */ - FP = B1; - PM_POP(6, EVT15) - PM_POP(5, EVT14) - PM_POP(4, EVT13) - PM_POP(3, EVT12) - PM_POP(2, EVT11) - PM_POP(1, EVT10) - PM_POP(0, EVT9) - PM_POP_SYNC(13) - PM_POP(13, EVT8) - PM_POP(12, EVT7) - PM_POP(11, EVT6) - PM_POP(10, EVT5) - FP += -4; /* EVT4 */ - PM_POP(9, EVT3) - PM_POP(8, EVT2) - - /* ICPLB Data */ - FP = B0; - PM_POP(7, ICPLB_DATA15) - PM_POP(6, ICPLB_DATA14) - PM_POP(5, ICPLB_DATA13) - PM_POP(4, ICPLB_DATA12) - PM_POP(3, ICPLB_DATA11) - PM_POP(2, ICPLB_DATA10) - PM_POP(1, ICPLB_DATA9) - PM_POP(0, ICPLB_DATA8) - PM_POP_SYNC(13) - PM_POP(13, ICPLB_DATA7) - PM_POP(12, ICPLB_DATA6) - PM_POP(11, ICPLB_DATA5) - PM_POP(10, ICPLB_DATA4) - PM_POP(9, ICPLB_DATA3) - PM_POP(8, ICPLB_DATA2) - PM_POP(7, ICPLB_DATA1) - PM_POP(6, ICPLB_DATA0) - - /* ICPLB Addr */ - FP = I3; - PM_POP(5, ICPLB_ADDR15) - PM_POP(4, ICPLB_ADDR14) - PM_POP(3, ICPLB_ADDR13) - PM_POP(2, ICPLB_ADDR12) - PM_POP(1, ICPLB_ADDR11) - PM_POP(0, ICPLB_ADDR10) - PM_POP_SYNC(13) - PM_POP(13, ICPLB_ADDR9) - PM_POP(12, ICPLB_ADDR8) - PM_POP(11, ICPLB_ADDR7) - PM_POP(10, ICPLB_ADDR6) - PM_POP(9, ICPLB_ADDR5) - PM_POP(8, ICPLB_ADDR4) - PM_POP(7, ICPLB_ADDR3) - PM_POP(6, ICPLB_ADDR2) - PM_POP(5, ICPLB_ADDR1) - PM_POP(4, ICPLB_ADDR0) - - /* DCPLB Data */ - FP = I2; - PM_POP(3, DCPLB_DATA15) - PM_POP(2, DCPLB_DATA14) - PM_POP(1, DCPLB_DATA13) - PM_POP(0, DCPLB_DATA12) - PM_POP_SYNC(13) - PM_POP(13, DCPLB_DATA11) - PM_POP(12, DCPLB_DATA10) - PM_POP(11, DCPLB_DATA9) - PM_POP(10, DCPLB_DATA8) - PM_POP(9, DCPLB_DATA7) - PM_POP(8, DCPLB_DATA6) - PM_POP(7, DCPLB_DATA5) - PM_POP(6, DCPLB_DATA4) - PM_POP(5, DCPLB_DATA3) - PM_POP(4, DCPLB_DATA2) - PM_POP(3, DCPLB_DATA1) - PM_POP(2, DCPLB_DATA0) - - /* DCPLB Addr */ - FP = I1; - PM_POP(1, DCPLB_ADDR15) - PM_POP(0, DCPLB_ADDR14) - PM_POP_SYNC(13) - PM_POP(13, DCPLB_ADDR13) - PM_POP(12, DCPLB_ADDR12) - PM_POP(11, DCPLB_ADDR11) - PM_POP(10, DCPLB_ADDR10) - PM_POP(9, DCPLB_ADDR9) - PM_POP(8, DCPLB_ADDR8) - PM_POP(7, DCPLB_ADDR7) - PM_POP(6, DCPLB_ADDR6) - PM_POP(5, DCPLB_ADDR5) - PM_POP(4, DCPLB_ADDR4) - PM_POP(3, DCPLB_ADDR3) - PM_POP(2, DCPLB_ADDR2) - PM_POP(1, DCPLB_ADDR1) - PM_POP(0, DCPLB_ADDR0) - - /* Restore System MMRs */ - FP.H = hi(SYSMMR_BASE); - FP.L = lo(SYSMMR_BASE); - -#ifdef EBIU_FCTL - PM_POP_SYNC(12) - PM_SYS_POP(12, EBIU_FCTL) - PM_SYS_POP(11, EBIU_MODE) - PM_SYS_POP(10, EBIU_MBSCTL) -#else - PM_POP_SYNC(9) -#endif - PM_SYS_POP(9, EBIU_AMBCTL1) - PM_SYS_POP(8, EBIU_AMBCTL0) - PM_SYS_POP16(7, EBIU_AMGCTL) - - PM_SYS_POP16(6, SYSCR) - -#ifdef PINT0_ASSIGN - PM_SYS_POP(5, PINT3_EDGE_SET) - PM_SYS_POP(4, PINT2_EDGE_SET) - PM_SYS_POP(3, PINT1_EDGE_SET) - PM_SYS_POP(2, PINT0_EDGE_SET) - PM_SYS_POP(1, PINT3_INVERT_SET) - PM_SYS_POP(0, PINT2_INVERT_SET) - PM_POP_SYNC(13) - PM_SYS_POP(13, PINT1_INVERT_SET) - PM_SYS_POP(12, PINT0_INVERT_SET) - PM_SYS_POP(11, PINT3_ASSIGN) - PM_SYS_POP(10, PINT2_ASSIGN) - PM_SYS_POP(9, PINT1_ASSIGN) - PM_SYS_POP(8, PINT0_ASSIGN) - PM_SYS_POP(7, PINT3_MASK_SET) - PM_SYS_POP(6, PINT2_MASK_SET) - PM_SYS_POP(5, PINT1_MASK_SET) - PM_SYS_POP(4, PINT0_MASK_SET) -#endif - -#ifdef SIC_IWR2 - PM_SYS_POP(3, SIC_IWR2) -#endif -#ifdef SIC_IWR1 - PM_SYS_POP(2, SIC_IWR1) -#endif -#ifdef SIC_IWR0 - PM_SYS_POP(1, SIC_IWR0) -#endif -#ifdef SIC_IWR - PM_SYS_POP(1, SIC_IWR) -#endif - -#ifdef SIC_IAR11 - PM_SYS_POP(0, SIC_IAR11) -#endif - PM_POP_SYNC(13) -#ifdef SIC_IAR8 - PM_SYS_POP(13, SIC_IAR10) - PM_SYS_POP(12, SIC_IAR9) - PM_SYS_POP(11, SIC_IAR8) -#endif -#ifdef SIC_IAR7 - PM_SYS_POP(10, SIC_IAR7) -#endif -#ifdef SIC_IAR6 - PM_SYS_POP(9, SIC_IAR6) - PM_SYS_POP(8, SIC_IAR5) - PM_SYS_POP(7, SIC_IAR4) -#endif -#ifdef SIC_IAR3 - PM_SYS_POP(6, SIC_IAR3) -#endif -#ifdef SIC_IAR0 - PM_SYS_POP(5, SIC_IAR2) - PM_SYS_POP(4, SIC_IAR1) - PM_SYS_POP(3, SIC_IAR0) -#endif -#ifdef SIC_IMASK0 -# ifdef SIC_IMASK2 - PM_SYS_POP(2, SIC_IMASK2) -# endif - PM_SYS_POP(1, SIC_IMASK1) - PM_SYS_POP(0, SIC_IMASK0) -#else - PM_SYS_POP(0, SIC_IMASK) -#endif - - /* Restore Core Registers */ - RETI = [sp++]; - SEQSTAT = [sp++]; - RETX = [sp++]; - SYSCFG = [sp++]; - CYCLES2 = [sp++]; - CYCLES = [sp++]; - ASTAT = [sp++]; - RETS = [sp++]; - - LB1 = [sp++]; - LB0 = [sp++]; - LT1 = [sp++]; - LT0 = [sp++]; - LC1 = [sp++]; - LC0 = [sp++]; - - a1.w = [sp++]; - a1.x = [sp++]; - a0.w = [sp++]; - a0.x = [sp++]; - b3 = [sp++]; - b2 = [sp++]; - b1 = [sp++]; - b0 = [sp++]; - - l3 = [sp++]; - l2 = [sp++]; - l1 = [sp++]; - l0 = [sp++]; - - m3 = [sp++]; - m2 = [sp++]; - m1 = [sp++]; - m0 = [sp++]; - - i3 = [sp++]; - i2 = [sp++]; - i1 = [sp++]; - i0 = [sp++]; - - usp = [sp++]; - fp = [sp++]; - (R7:0, P5:0) = [sp++]; + bfin_core_mmr_restore; + bfin_sys_mmr_restore; + bfin_cpu_reg_restore; [--sp] = RETI; /* Clear Global Interrupt Disable */ SP += 4; diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index e4137297b79..86b5a095c5a 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -25,13 +25,6 @@ #include <asm/context.S> -#if defined(CONFIG_BFIN_SCRATCH_REG_RETN) -# define EX_SCRATCH_REG RETN -#elif defined(CONFIG_BFIN_SCRATCH_REG_RETE) -# define EX_SCRATCH_REG RETE -#else -# define EX_SCRATCH_REG CYCLES -#endif #ifdef CONFIG_EXCPT_IRQ_SYSC_L1 .section .l1.text @@ -537,61 +530,6 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/ jump .Lsyscall_really_exit; ENDPROC(_trap) -ENTRY(_kernel_execve) - link SIZEOF_PTREGS; - p0 = sp; - r3 = SIZEOF_PTREGS / 4; - r4 = 0(x); -.Lclear_regs: - [p0++] = r4; - r3 += -1; - cc = r3 == 0; - if !cc jump .Lclear_regs (bp); - - p0 = sp; - sp += -16; - [sp + 12] = p0; - pseudo_long_call _do_execve, p5; - SP += 16; - cc = r0 == 0; - if ! cc jump .Lexecve_failed; - /* Success. Copy our temporary pt_regs to the top of the kernel - * stack and do a normal exception return. - */ - r1 = sp; - r0 = (-KERNEL_STACK_SIZE) (x); - r1 = r1 & r0; - p2 = r1; - p3 = [p2]; - r0 = KERNEL_STACK_SIZE - 4 (z); - p1 = r0; - p1 = p1 + p2; - - p0 = fp; - r4 = [p0--]; - r3 = SIZEOF_PTREGS / 4; -.Lcopy_regs: - r4 = [p0--]; - [p1--] = r4; - r3 += -1; - cc = r3 == 0; - if ! cc jump .Lcopy_regs (bp); - - r0 = (KERNEL_STACK_SIZE - SIZEOF_PTREGS) (z); - p1 = r0; - p1 = p1 + p2; - sp = p1; - r0 = syscfg; - [SP + PT_SYSCFG] = r0; - [p3 + (TASK_THREAD + THREAD_KSP)] = sp; - - RESTORE_CONTEXT; - rti; -.Lexecve_failed: - unlink; - rts; -ENDPROC(_kernel_execve) - ENTRY(_system_call) /* Store IPEND */ p2.l = lo(IPEND); @@ -711,8 +649,6 @@ ENTRY(_system_call) jump .Lresume_userspace_1; .Lsyscall_sigpending: - cc = BITTST(r7, TIF_RESTORE_SIGMASK); - if cc jump .Lsyscall_do_signals; cc = BITTST(r7, TIF_SIGPENDING); if cc jump .Lsyscall_do_signals; cc = BITTST(r7, TIF_NOTIFY_RESUME); @@ -1141,7 +1077,8 @@ ENTRY(_schedule_and_signal_from_int) sti r0; /* finish the userspace "atomic" functions for it */ - r1 = FIXED_CODE_END; + r1.l = lo(FIXED_CODE_END); + r1.h = hi(FIXED_CODE_END); r2 = [sp + PT_PC]; cc = r1 <= r2; if cc jump .Lresume_userspace (bp); @@ -1244,7 +1181,7 @@ ENTRY(_software_trace_buff) .endr #endif /* CONFIG_DEBUG_BFIN_HWTRACE_EXPAND */ -#if CONFIG_EARLY_PRINTK +#ifdef CONFIG_EARLY_PRINTK __INIT ENTRY(_early_trap) SAVE_ALL_SYS @@ -1376,7 +1313,7 @@ END(_ex_table) ENTRY(_sys_call_table) .long _sys_restart_syscall /* 0 */ .long _sys_exit - .long _sys_fork + .long _sys_ni_syscall /* fork */ .long _sys_read .long _sys_write .long _sys_open /* 5 */ @@ -1494,7 +1431,7 @@ ENTRY(_sys_call_table) .long _sys_ni_syscall /* old sys_ipc */ .long _sys_fsync .long _sys_ni_syscall /* old sys_sigreturn */ - .long _sys_clone /* 120 */ + .long _bfin_clone /* 120 */ .long _sys_setdomainname .long _sys_newuname .long _sys_ni_syscall /* old sys_modify_ldt */ @@ -1755,6 +1692,8 @@ ENTRY(_sys_call_table) .long _sys_syncfs .long _sys_setns .long _sys_sendmmsg /* 380 */ + .long _sys_process_vm_readv + .long _sys_process_vm_writev .rept NR_syscalls-(.-_sys_call_table)/4 .long _sys_ni_syscall diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S index 8b4d9885440..31515f0146f 100644 --- a/arch/blackfin/mach-common/head.S +++ b/arch/blackfin/mach-common/head.S @@ -210,14 +210,12 @@ ENDPROC(__start) ENTRY(_real_start) /* Enable nested interrupts */ [--sp] = reti; - /* watchdog off for now */ p0.l = lo(WDOG_CTL); p0.h = hi(WDOG_CTL); r0 = 0xAD6(z); w[p0] = r0; ssync; - /* Pass the u-boot arguments to the global value command line */ R0 = R7; call _cmdline_init; diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index 332dace6af3..1f94784eab6 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -16,6 +16,8 @@ #include <linux/seq_file.h> #include <linux/irq.h> #include <linux/sched.h> +#include <linux/syscore_ops.h> +#include <asm/delay.h> #ifdef CONFIG_IPIPE #include <linux/ipipe.h> #endif @@ -24,8 +26,7 @@ #include <asm/gpio.h> #include <asm/irq_handler.h> #include <asm/dpmc.h> - -#define SIC_SYSIRQ(irq) (irq - (IRQ_CORETMR + 1)) +#include <asm/traps.h> /* * NOTES: @@ -50,6 +51,7 @@ unsigned long bfin_sic_iwr[3]; /* Up to 3 SIC_IWRx registers */ unsigned vr_wakeup; #endif +#ifndef SEC_GCTL static struct ivgx { /* irq number for request_irq, available in mach-bf5xx/irq.h */ unsigned int irqno; @@ -78,7 +80,8 @@ static void __init search_IAR(void) for (irqN = 0; irqN < NR_PERI_INTS; irqN += 4) { int irqn; - u32 iar = bfin_read32((unsigned long *)SIC_IAR0 + + u32 iar = + bfin_read32((unsigned long *)SIC_IAR0 + #if defined(CONFIG_BF51x) || defined(CONFIG_BF52x) || \ defined(CONFIG_BF538) || defined(CONFIG_BF539) ((irqN % 32) >> 3) + ((irqN / 32) * ((SIC_IAR4 - SIC_IAR0) / 4)) @@ -86,7 +89,6 @@ static void __init search_IAR(void) (irqN >> 3) #endif ); - for (irqn = irqN; irqn < irqN + 4; ++irqn) { int iar_shift = (irqn & 7) * 4; if (ivg == (0xf & (iar >> iar_shift))) { @@ -99,11 +101,11 @@ static void __init search_IAR(void) } } } +#endif /* * This is for core internal IRQs */ - void bfin_ack_noop(struct irq_data *d) { /* Dummy function. */ @@ -133,24 +135,23 @@ static void bfin_core_unmask_irq(struct irq_data *d) return; } +#ifndef SEC_GCTL void bfin_internal_mask_irq(unsigned int irq) { unsigned long flags = hard_local_irq_save(); - #ifdef SIC_IMASK0 - unsigned mask_bank = SIC_SYSIRQ(irq) / 32; - unsigned mask_bit = SIC_SYSIRQ(irq) % 32; + unsigned mask_bank = BFIN_SYSIRQ(irq) / 32; + unsigned mask_bit = BFIN_SYSIRQ(irq) % 32; bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) & - ~(1 << mask_bit)); -# ifdef CONFIG_SMP + ~(1 << mask_bit)); +# if defined(CONFIG_SMP) || defined(CONFIG_ICC) bfin_write_SICB_IMASK(mask_bank, bfin_read_SICB_IMASK(mask_bank) & - ~(1 << mask_bit)); + ~(1 << mask_bit)); # endif #else bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() & - ~(1 << SIC_SYSIRQ(irq))); -#endif - + ~(1 << BFIN_SYSIRQ(irq))); +#endif /* end of SIC_IMASK0 */ hard_local_irq_restore(flags); } @@ -160,7 +161,7 @@ static void bfin_internal_mask_irq_chip(struct irq_data *d) } #ifdef CONFIG_SMP -static void bfin_internal_unmask_irq_affinity(unsigned int irq, +void bfin_internal_unmask_irq_affinity(unsigned int irq, const struct cpumask *affinity) #else void bfin_internal_unmask_irq(unsigned int irq) @@ -169,25 +170,24 @@ void bfin_internal_unmask_irq(unsigned int irq) unsigned long flags = hard_local_irq_save(); #ifdef SIC_IMASK0 - unsigned mask_bank = SIC_SYSIRQ(irq) / 32; - unsigned mask_bit = SIC_SYSIRQ(irq) % 32; + unsigned mask_bank = BFIN_SYSIRQ(irq) / 32; + unsigned mask_bit = BFIN_SYSIRQ(irq) % 32; # ifdef CONFIG_SMP if (cpumask_test_cpu(0, affinity)) # endif bfin_write_SIC_IMASK(mask_bank, - bfin_read_SIC_IMASK(mask_bank) | - (1 << mask_bit)); + bfin_read_SIC_IMASK(mask_bank) | + (1 << mask_bit)); # ifdef CONFIG_SMP if (cpumask_test_cpu(1, affinity)) bfin_write_SICB_IMASK(mask_bank, - bfin_read_SICB_IMASK(mask_bank) | - (1 << mask_bit)); + bfin_read_SICB_IMASK(mask_bank) | + (1 << mask_bit)); # endif #else bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() | - (1 << SIC_SYSIRQ(irq))); + (1 << BFIN_SYSIRQ(irq))); #endif - hard_local_irq_restore(flags); } @@ -212,13 +212,13 @@ static void bfin_internal_unmask_irq_chip(struct irq_data *d) } #endif -#ifdef CONFIG_PM +#if defined(CONFIG_PM) int bfin_internal_set_wake(unsigned int irq, unsigned int state) { u32 bank, bit, wakeup = 0; unsigned long flags; - bank = SIC_SYSIRQ(irq) / 32; - bit = SIC_SYSIRQ(irq) % 32; + bank = BFIN_SYSIRQ(irq) / 32; + bit = BFIN_SYSIRQ(irq) % 32; switch (irq) { #ifdef IRQ_RTC @@ -271,22 +271,273 @@ static int bfin_internal_set_wake_chip(struct irq_data *d, unsigned int state) return bfin_internal_set_wake(d->irq, state); } #else +inline int bfin_internal_set_wake(unsigned int irq, unsigned int state) +{ + return 0; +} # define bfin_internal_set_wake_chip NULL #endif +#else /* SEC_GCTL */ +static void bfin_sec_preflow_handler(struct irq_data *d) +{ + unsigned long flags = hard_local_irq_save(); + unsigned int sid = BFIN_SYSIRQ(d->irq); + + bfin_write_SEC_SCI(0, SEC_CSID, sid); + + hard_local_irq_restore(flags); +} + +static void bfin_sec_mask_ack_irq(struct irq_data *d) +{ + unsigned long flags = hard_local_irq_save(); + unsigned int sid = BFIN_SYSIRQ(d->irq); + + bfin_write_SEC_SCI(0, SEC_CSID, sid); + + hard_local_irq_restore(flags); +} + +static void bfin_sec_unmask_irq(struct irq_data *d) +{ + unsigned long flags = hard_local_irq_save(); + unsigned int sid = BFIN_SYSIRQ(d->irq); + + bfin_write32(SEC_END, sid); + + hard_local_irq_restore(flags); +} + +static void bfin_sec_enable_ssi(unsigned int sid) +{ + unsigned long flags = hard_local_irq_save(); + uint32_t reg_sctl = bfin_read_SEC_SCTL(sid); + + reg_sctl |= SEC_SCTL_SRC_EN; + bfin_write_SEC_SCTL(sid, reg_sctl); + + hard_local_irq_restore(flags); +} + +static void bfin_sec_disable_ssi(unsigned int sid) +{ + unsigned long flags = hard_local_irq_save(); + uint32_t reg_sctl = bfin_read_SEC_SCTL(sid); + + reg_sctl &= ((uint32_t)~SEC_SCTL_SRC_EN); + bfin_write_SEC_SCTL(sid, reg_sctl); + + hard_local_irq_restore(flags); +} + +static void bfin_sec_set_ssi_coreid(unsigned int sid, unsigned int coreid) +{ + unsigned long flags = hard_local_irq_save(); + uint32_t reg_sctl = bfin_read_SEC_SCTL(sid); + + reg_sctl &= ((uint32_t)~SEC_SCTL_CTG); + bfin_write_SEC_SCTL(sid, reg_sctl | ((coreid << 20) & SEC_SCTL_CTG)); + + hard_local_irq_restore(flags); +} + +static void bfin_sec_enable_sci(unsigned int sid) +{ + unsigned long flags = hard_local_irq_save(); + uint32_t reg_sctl = bfin_read_SEC_SCTL(sid); + + if (sid == BFIN_SYSIRQ(IRQ_WATCH0)) + reg_sctl |= SEC_SCTL_FAULT_EN; + else + reg_sctl |= SEC_SCTL_INT_EN; + bfin_write_SEC_SCTL(sid, reg_sctl); + + hard_local_irq_restore(flags); +} + +static void bfin_sec_disable_sci(unsigned int sid) +{ + unsigned long flags = hard_local_irq_save(); + uint32_t reg_sctl = bfin_read_SEC_SCTL(sid); + + reg_sctl &= ((uint32_t)~SEC_SCTL_INT_EN); + bfin_write_SEC_SCTL(sid, reg_sctl); + + hard_local_irq_restore(flags); +} + +static void bfin_sec_enable(struct irq_data *d) +{ + unsigned long flags = hard_local_irq_save(); + unsigned int sid = BFIN_SYSIRQ(d->irq); + + bfin_sec_enable_sci(sid); + bfin_sec_enable_ssi(sid); + + hard_local_irq_restore(flags); +} + +static void bfin_sec_disable(struct irq_data *d) +{ + unsigned long flags = hard_local_irq_save(); + unsigned int sid = BFIN_SYSIRQ(d->irq); + + bfin_sec_disable_sci(sid); + bfin_sec_disable_ssi(sid); + + hard_local_irq_restore(flags); +} + +static void bfin_sec_set_priority(unsigned int sec_int_levels, u8 *sec_int_priority) +{ + unsigned long flags = hard_local_irq_save(); + uint32_t reg_sctl; + int i; + + bfin_write_SEC_SCI(0, SEC_CPLVL, sec_int_levels); + + for (i = 0; i < SYS_IRQS - BFIN_IRQ(0); i++) { + reg_sctl = bfin_read_SEC_SCTL(i) & ~SEC_SCTL_PRIO; + reg_sctl |= sec_int_priority[i] << SEC_SCTL_PRIO_OFFSET; + bfin_write_SEC_SCTL(i, reg_sctl); + } + + hard_local_irq_restore(flags); +} + +void bfin_sec_raise_irq(unsigned int irq) +{ + unsigned long flags = hard_local_irq_save(); + unsigned int sid = BFIN_SYSIRQ(irq); + + bfin_write32(SEC_RAISE, sid); + + hard_local_irq_restore(flags); +} + +static void init_software_driven_irq(void) +{ + bfin_sec_set_ssi_coreid(34, 0); + bfin_sec_set_ssi_coreid(35, 1); + + bfin_sec_enable_sci(35); + bfin_sec_enable_ssi(35); + bfin_sec_set_ssi_coreid(36, 0); + bfin_sec_set_ssi_coreid(37, 1); + bfin_sec_enable_sci(37); + bfin_sec_enable_ssi(37); +} + +void bfin_sec_resume(void) +{ + bfin_write_SEC_SCI(0, SEC_CCTL, SEC_CCTL_RESET); + udelay(100); + bfin_write_SEC_GCTL(SEC_GCTL_EN); + bfin_write_SEC_SCI(0, SEC_CCTL, SEC_CCTL_EN | SEC_CCTL_NMI_EN); +} + +void handle_sec_sfi_fault(uint32_t gstat) +{ + +} + +void handle_sec_sci_fault(uint32_t gstat) +{ + uint32_t core_id; + uint32_t cstat; + + core_id = gstat & SEC_GSTAT_SCI; + cstat = bfin_read_SEC_SCI(core_id, SEC_CSTAT); + if (cstat & SEC_CSTAT_ERR) { + switch (cstat & SEC_CSTAT_ERRC) { + case SEC_CSTAT_ACKERR: + printk(KERN_DEBUG "sec ack err\n"); + break; + default: + printk(KERN_DEBUG "sec sci unknow err\n"); + } + } + +} + +void handle_sec_ssi_fault(uint32_t gstat) +{ + uint32_t sid; + uint32_t sstat; + + sid = gstat & SEC_GSTAT_SID; + sstat = bfin_read_SEC_SSTAT(sid); + +} + +void handle_sec_fault(uint32_t sec_gstat) +{ + if (sec_gstat & SEC_GSTAT_ERR) { + + switch (sec_gstat & SEC_GSTAT_ERRC) { + case 0: + handle_sec_sfi_fault(sec_gstat); + break; + case SEC_GSTAT_SCIERR: + handle_sec_sci_fault(sec_gstat); + break; + case SEC_GSTAT_SSIERR: + handle_sec_ssi_fault(sec_gstat); + break; + } + + + } +} + +static struct irqaction bfin_fault_irq = { + .name = "Blackfin fault", +}; + +static irqreturn_t bfin_fault_routine(int irq, void *data) +{ + struct pt_regs *fp = get_irq_regs(); + + switch (irq) { + case IRQ_C0_DBL_FAULT: + double_fault_c(fp); + break; + case IRQ_C0_HW_ERR: + dump_bfin_process(fp); + dump_bfin_mem(fp); + show_regs(fp); + printk(KERN_NOTICE "Kernel Stack\n"); + show_stack(current, NULL); + print_modules(); + panic("Core 0 hardware error"); + break; + case IRQ_C0_NMI_L1_PARITY_ERR: + panic("Core 0 NMI L1 parity error"); + break; + case IRQ_SEC_ERR: + pr_err("SEC error\n"); + handle_sec_fault(bfin_read32(SEC_GSTAT)); + break; + default: + panic("Unknown fault %d", irq); + } + + return IRQ_HANDLED; +} +#endif /* SEC_GCTL */ + static struct irq_chip bfin_core_irqchip = { .name = "CORE", - .irq_ack = bfin_ack_noop, .irq_mask = bfin_core_mask_irq, .irq_unmask = bfin_core_unmask_irq, }; +#ifndef SEC_GCTL static struct irq_chip bfin_internal_irqchip = { .name = "INTN", - .irq_ack = bfin_ack_noop, .irq_mask = bfin_internal_mask_irq_chip, .irq_unmask = bfin_internal_unmask_irq_chip, - .irq_mask_ack = bfin_internal_mask_irq_chip, .irq_disable = bfin_internal_mask_irq_chip, .irq_enable = bfin_internal_unmask_irq_chip, #ifdef CONFIG_SMP @@ -294,6 +545,17 @@ static struct irq_chip bfin_internal_irqchip = { #endif .irq_set_wake = bfin_internal_set_wake_chip, }; +#else +static struct irq_chip bfin_sec_irqchip = { + .name = "SEC", + .irq_mask_ack = bfin_sec_mask_ack_irq, + .irq_mask = bfin_sec_mask_ack_irq, + .irq_unmask = bfin_sec_unmask_irq, + .irq_eoi = bfin_sec_unmask_irq, + .irq_disable = bfin_sec_disable, + .irq_enable = bfin_sec_enable, +}; +#endif void bfin_handle_irq(unsigned irq) { @@ -396,8 +658,6 @@ int bfin_mac_status_set_wake(struct irq_data *d, unsigned int state) static struct irq_chip bfin_mac_status_irqchip = { .name = "MACST", - .irq_ack = bfin_ack_noop, - .irq_mask_ack = bfin_mac_status_mask_irq, .irq_mask = bfin_mac_status_mask_irq, .irq_unmask = bfin_mac_status_unmask_irq, .irq_set_wake = bfin_mac_status_set_wake, @@ -421,15 +681,15 @@ void bfin_demux_mac_status_irq(unsigned int int_err_irq, } else { bfin_mac_status_ack_irq(irq); pr_debug("IRQ %d:" - " MASKED MAC ERROR INTERRUPT ASSERTED\n", - irq); + " MASKED MAC ERROR INTERRUPT ASSERTED\n", + irq); } } else printk(KERN_ERR - "%s : %s : LINE %d :\nIRQ ?: MAC ERROR" - " INTERRUPT ASSERTED BUT NO SOURCE FOUND" - "(EMAC_SYSTAT=0x%X)\n", - __func__, __FILE__, __LINE__, status); + "%s : %s : LINE %d :\nIRQ ?: MAC ERROR" + " INTERRUPT ASSERTED BUT NO SOURCE FOUND" + "(EMAC_SYSTAT=0x%X)\n", + __func__, __FILE__, __LINE__, status); } #endif @@ -441,10 +701,9 @@ static inline void bfin_set_irq_handler(unsigned irq, irq_flow_handler_t handle) __irq_set_handler_locked(irq, handle); } -static DECLARE_BITMAP(gpio_enabled, MAX_BLACKFIN_GPIOS); -extern void bfin_gpio_irq_prepare(unsigned gpio); +#ifdef CONFIG_GPIO_ADI -#if !BFIN_GPIO_PINT +static DECLARE_BITMAP(gpio_enabled, MAX_BLACKFIN_GPIOS); static void bfin_gpio_ack_irq(struct irq_data *d) { @@ -558,15 +817,6 @@ static int bfin_gpio_irq_type(struct irq_data *d, unsigned int type) return 0; } -#ifdef CONFIG_PM -static int bfin_gpio_set_wake(struct irq_data *d, unsigned int state) -{ - return gpio_pm_wakeup_ctrl(irq_to_gpio(d->irq), state); -} -#else -# define bfin_gpio_set_wake NULL -#endif - static void bfin_demux_gpio_block(unsigned int irq) { unsigned int gpio, mask; @@ -583,7 +833,7 @@ static void bfin_demux_gpio_block(unsigned int irq) } void bfin_demux_gpio_irq(unsigned int inta_irq, - struct irq_desc *desc) + struct irq_desc *desc) { unsigned int irq; @@ -633,293 +883,71 @@ void bfin_demux_gpio_irq(unsigned int inta_irq, bfin_demux_gpio_block(irq); } -#else - -#define NR_PINT_SYS_IRQS 4 -#define NR_PINT_BITS 32 -#define NR_PINTS 160 -#define IRQ_NOT_AVAIL 0xFF - -#define PINT_2_BANK(x) ((x) >> 5) -#define PINT_2_BIT(x) ((x) & 0x1F) -#define PINT_BIT(x) (1 << (PINT_2_BIT(x))) - -static unsigned char irq2pint_lut[NR_PINTS]; -static unsigned char pint2irq_lut[NR_PINT_SYS_IRQS * NR_PINT_BITS]; - -static struct bfin_pint_regs * const pint[NR_PINT_SYS_IRQS] = { - (struct bfin_pint_regs *)PINT0_MASK_SET, - (struct bfin_pint_regs *)PINT1_MASK_SET, - (struct bfin_pint_regs *)PINT2_MASK_SET, - (struct bfin_pint_regs *)PINT3_MASK_SET, -}; - -inline unsigned int get_irq_base(u32 bank, u8 bmap) -{ - unsigned int irq_base; - - if (bank < 2) { /*PA-PB */ - irq_base = IRQ_PA0 + bmap * 16; - } else { /*PC-PJ */ - irq_base = IRQ_PC0 + bmap * 16; - } - - return irq_base; -} - - /* Whenever PINTx_ASSIGN is altered init_pint_lut() must be executed! */ -void init_pint_lut(void) -{ - u16 bank, bit, irq_base, bit_pos; - u32 pint_assign; - u8 bmap; - - memset(irq2pint_lut, IRQ_NOT_AVAIL, sizeof(irq2pint_lut)); - - for (bank = 0; bank < NR_PINT_SYS_IRQS; bank++) { - - pint_assign = pint[bank]->assign; - - for (bit = 0; bit < NR_PINT_BITS; bit++) { - - bmap = (pint_assign >> ((bit / 8) * 8)) & 0xFF; - - irq_base = get_irq_base(bank, bmap); - - irq_base += (bit % 8) + ((bit / 8) & 1 ? 8 : 0); - bit_pos = bit + bank * NR_PINT_BITS; - - pint2irq_lut[bit_pos] = irq_base - SYS_IRQS; - irq2pint_lut[irq_base - SYS_IRQS] = bit_pos; - } - } -} +#ifdef CONFIG_PM -static void bfin_gpio_ack_irq(struct irq_data *d) +static int bfin_gpio_set_wake(struct irq_data *d, unsigned int state) { - u32 pint_val = irq2pint_lut[d->irq - SYS_IRQS]; - u32 pintbit = PINT_BIT(pint_val); - u32 bank = PINT_2_BANK(pint_val); - - if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) { - if (pint[bank]->invert_set & pintbit) - pint[bank]->invert_clear = pintbit; - else - pint[bank]->invert_set = pintbit; - } - pint[bank]->request = pintbit; - + return bfin_gpio_pm_wakeup_ctrl(irq_to_gpio(d->irq), state); } -static void bfin_gpio_mask_ack_irq(struct irq_data *d) -{ - u32 pint_val = irq2pint_lut[d->irq - SYS_IRQS]; - u32 pintbit = PINT_BIT(pint_val); - u32 bank = PINT_2_BANK(pint_val); +#else - if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) { - if (pint[bank]->invert_set & pintbit) - pint[bank]->invert_clear = pintbit; - else - pint[bank]->invert_set = pintbit; - } +# define bfin_gpio_set_wake NULL - pint[bank]->request = pintbit; - pint[bank]->mask_clear = pintbit; -} +#endif -static void bfin_gpio_mask_irq(struct irq_data *d) -{ - u32 pint_val = irq2pint_lut[d->irq - SYS_IRQS]; +static struct irq_chip bfin_gpio_irqchip = { + .name = "GPIO", + .irq_ack = bfin_gpio_ack_irq, + .irq_mask = bfin_gpio_mask_irq, + .irq_mask_ack = bfin_gpio_mask_ack_irq, + .irq_unmask = bfin_gpio_unmask_irq, + .irq_disable = bfin_gpio_mask_irq, + .irq_enable = bfin_gpio_unmask_irq, + .irq_set_type = bfin_gpio_irq_type, + .irq_startup = bfin_gpio_irq_startup, + .irq_shutdown = bfin_gpio_irq_shutdown, + .irq_set_wake = bfin_gpio_set_wake, +}; - pint[PINT_2_BANK(pint_val)]->mask_clear = PINT_BIT(pint_val); -} +#endif -static void bfin_gpio_unmask_irq(struct irq_data *d) -{ - u32 pint_val = irq2pint_lut[d->irq - SYS_IRQS]; - u32 pintbit = PINT_BIT(pint_val); - u32 bank = PINT_2_BANK(pint_val); +#ifdef CONFIG_PM - pint[bank]->mask_set = pintbit; -} +#ifdef SEC_GCTL +static u32 save_pint_sec_ctl[NR_PINT_SYS_IRQS]; -static unsigned int bfin_gpio_irq_startup(struct irq_data *d) +static int sec_suspend(void) { - unsigned int irq = d->irq; - u32 gpionr = irq_to_gpio(irq); - u32 pint_val = irq2pint_lut[irq - SYS_IRQS]; - - if (pint_val == IRQ_NOT_AVAIL) { - printk(KERN_ERR - "GPIO IRQ %d :Not in PINT Assign table " - "Reconfigure Interrupt to Port Assignemt\n", irq); - return -ENODEV; - } - - if (__test_and_set_bit(gpionr, gpio_enabled)) - bfin_gpio_irq_prepare(gpionr); - - bfin_gpio_unmask_irq(d); + u32 bank; + for (bank = 0; bank < NR_PINT_SYS_IRQS; bank++) + save_pint_sec_ctl[bank] = bfin_read_SEC_SCTL(bank + BFIN_SYSIRQ(IRQ_PINT0)); return 0; } -static void bfin_gpio_irq_shutdown(struct irq_data *d) -{ - u32 gpionr = irq_to_gpio(d->irq); - - bfin_gpio_mask_irq(d); - __clear_bit(gpionr, gpio_enabled); - bfin_gpio_irq_free(gpionr); -} - -static int bfin_gpio_irq_type(struct irq_data *d, unsigned int type) +static void sec_resume(void) { - unsigned int irq = d->irq; - int ret; - char buf[16]; - u32 gpionr = irq_to_gpio(irq); - u32 pint_val = irq2pint_lut[irq - SYS_IRQS]; - u32 pintbit = PINT_BIT(pint_val); - u32 bank = PINT_2_BANK(pint_val); + u32 bank; - if (pint_val == IRQ_NOT_AVAIL) - return -ENODEV; + bfin_write_SEC_SCI(0, SEC_CCTL, SEC_CCTL_RESET); + udelay(100); + bfin_write_SEC_GCTL(SEC_GCTL_EN); + bfin_write_SEC_SCI(0, SEC_CCTL, SEC_CCTL_EN | SEC_CCTL_NMI_EN); - if (type == IRQ_TYPE_PROBE) { - /* only probe unenabled GPIO interrupt lines */ - if (test_bit(gpionr, gpio_enabled)) - return 0; - type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; - } - - if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING | - IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { - - snprintf(buf, 16, "gpio-irq%d", irq); - ret = bfin_gpio_irq_request(gpionr, buf); - if (ret) - return ret; - - if (__test_and_set_bit(gpionr, gpio_enabled)) - bfin_gpio_irq_prepare(gpionr); - - } else { - __clear_bit(gpionr, gpio_enabled); - return 0; - } - - if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW))) - pint[bank]->invert_set = pintbit; /* low or falling edge denoted by one */ - else - pint[bank]->invert_clear = pintbit; /* high or rising edge denoted by zero */ - - if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) - == (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) { - if (gpio_get_value(gpionr)) - pint[bank]->invert_set = pintbit; - else - pint[bank]->invert_clear = pintbit; - } - - if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) { - pint[bank]->edge_set = pintbit; - bfin_set_irq_handler(irq, handle_edge_irq); - } else { - pint[bank]->edge_clear = pintbit; - bfin_set_irq_handler(irq, handle_level_irq); - } - - return 0; + for (bank = 0; bank < NR_PINT_SYS_IRQS; bank++) + bfin_write_SEC_SCTL(bank + BFIN_SYSIRQ(IRQ_PINT0), save_pint_sec_ctl[bank]); } -#ifdef CONFIG_PM -static int bfin_gpio_set_wake(struct irq_data *d, unsigned int state) -{ - u32 pint_irq; - u32 pint_val = irq2pint_lut[d->irq - SYS_IRQS]; - u32 bank = PINT_2_BANK(pint_val); - - switch (bank) { - case 0: - pint_irq = IRQ_PINT0; - break; - case 2: - pint_irq = IRQ_PINT2; - break; - case 3: - pint_irq = IRQ_PINT3; - break; - case 1: - pint_irq = IRQ_PINT1; - break; - default: - return -EINVAL; - } - - bfin_internal_set_wake(pint_irq, state); - - return 0; -} -#else -# define bfin_gpio_set_wake NULL +static struct syscore_ops sec_pm_syscore_ops = { + .suspend = sec_suspend, + .resume = sec_resume, +}; #endif -void bfin_demux_gpio_irq(unsigned int inta_irq, - struct irq_desc *desc) -{ - u32 bank, pint_val; - u32 request, irq; - - switch (inta_irq) { - case IRQ_PINT0: - bank = 0; - break; - case IRQ_PINT2: - bank = 2; - break; - case IRQ_PINT3: - bank = 3; - break; - case IRQ_PINT1: - bank = 1; - break; - default: - return; - } - - pint_val = bank * NR_PINT_BITS; - - request = pint[bank]->request; - - while (request) { - if (request & 1) { - irq = pint2irq_lut[pint_val] + SYS_IRQS; - bfin_handle_irq(irq); - } - pint_val++; - request >>= 1; - } - -} #endif -static struct irq_chip bfin_gpio_irqchip = { - .name = "GPIO", - .irq_ack = bfin_gpio_ack_irq, - .irq_mask = bfin_gpio_mask_irq, - .irq_mask_ack = bfin_gpio_mask_ack_irq, - .irq_unmask = bfin_gpio_unmask_irq, - .irq_disable = bfin_gpio_mask_irq, - .irq_enable = bfin_gpio_unmask_irq, - .irq_set_type = bfin_gpio_irq_type, - .irq_startup = bfin_gpio_irq_startup, - .irq_shutdown = bfin_gpio_irq_shutdown, - .irq_set_wake = bfin_gpio_set_wake, -}; - -void __cpuinit init_exception_vectors(void) +void init_exception_vectors(void) { /* cannot program in software: * evt0 - emulation (jtag) @@ -941,6 +969,7 @@ void __cpuinit init_exception_vectors(void) CSYNC(); } +#ifndef SEC_GCTL /* * This function should be called during kernel startup to initialize * the BFin IRQ handling routines. @@ -958,7 +987,7 @@ int __init init_arch_irq(void) # ifdef SIC_IMASK2 bfin_write_SIC_IMASK2(SIC_UNMASK_ALL); # endif -# ifdef CONFIG_SMP +# if defined(CONFIG_SMP) || defined(CONFIG_ICC) bfin_write_SICB_IMASK0(SIC_UNMASK_ALL); bfin_write_SICB_IMASK1(SIC_UNMASK_ALL); # endif @@ -968,17 +997,6 @@ int __init init_arch_irq(void) local_irq_disable(); -#if BFIN_GPIO_PINT -# ifdef CONFIG_PINTx_REASSIGN - pint[0]->assign = CONFIG_PINT0_ASSIGN; - pint[1]->assign = CONFIG_PINT1_ASSIGN; - pint[2]->assign = CONFIG_PINT2_ASSIGN; - pint[3]->assign = CONFIG_PINT3_ASSIGN; -# endif - /* Whenever PINTx_ASSIGN is altered init_pint_lut() must be executed! */ - init_pint_lut(); -#endif - for (irq = 0; irq <= SYS_IRQS; irq++) { if (irq <= IRQ_CORETMR) irq_set_chip(irq, &bfin_core_irqchip); @@ -986,12 +1004,8 @@ int __init init_arch_irq(void) irq_set_chip(irq, &bfin_internal_irqchip); switch (irq) { -#if BFIN_GPIO_PINT - case IRQ_PINT0: - case IRQ_PINT1: - case IRQ_PINT2: - case IRQ_PINT3: -#elif defined(BF537_FAMILY) +#if !BFIN_GPIO_PINT +#if defined(BF537_FAMILY) case IRQ_PH_INTA_MAC_RX: case IRQ_PF_INTA_PG_INTA: #elif defined(BF533_FAMILY) @@ -1009,13 +1023,14 @@ int __init init_arch_irq(void) #endif irq_set_chained_handler(irq, bfin_demux_gpio_irq); break; +#endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) case IRQ_MAC_ERROR: irq_set_chained_handler(irq, bfin_demux_mac_status_irq); break; #endif -#ifdef CONFIG_SMP +#if defined(CONFIG_SMP) || defined(CONFIG_ICC) case IRQ_SUPPLE_0: case IRQ_SUPPLE_1: irq_set_handler(irq, handle_percpu_irq); @@ -1050,17 +1065,18 @@ int __init init_arch_irq(void) init_mach_irq(); -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if (defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)) for (irq = IRQ_MAC_PHYINT; irq <= IRQ_MAC_STMDONE; irq++) irq_set_chip_and_handler(irq, &bfin_mac_status_irqchip, handle_level_irq); #endif /* if configured as edge, then will be changed to do_edge_IRQ */ +#ifdef CONFIG_GPIO_ADI for (irq = GPIO_IRQ_BASE; irq < (GPIO_IRQ_BASE + MAX_BLACKFIN_GPIOS); irq++) irq_set_chip_and_handler(irq, &bfin_gpio_irqchip, handle_level_irq); - +#endif bfin_write_IMASK(0); CSYNC(); ilat = bfin_read_ILAT(); @@ -1078,8 +1094,9 @@ int __init init_arch_irq(void) /* Enable interrupts IVG7-15 */ bfin_irq_flags |= IMASK_IVG15 | - IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 | - IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW; + IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 | + IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW; + /* This implicitly covers ANOMALY_05000171 * Boot-ROM code modifies SICA_IWRx wakeup registers @@ -1103,7 +1120,6 @@ int __init init_arch_irq(void) #else bfin_write_SIC_IWR(IWR_DISABLE_ALL); #endif - return 0; } @@ -1115,10 +1131,8 @@ static int vec_to_irq(int vec) struct ivgx *ivg = ivg7_13[vec - IVG7].ifirst; struct ivgx *ivg_stop = ivg7_13[vec - IVG7].istop; unsigned long sic_status[3]; - if (likely(vec == EVT_IVTMR_P)) return IRQ_CORETMR; - #ifdef SIC_ISR sic_status[0] = bfin_read_SIC_IMASK() & bfin_read_SIC_ISR(); #else @@ -1149,6 +1163,94 @@ static int vec_to_irq(int vec) } } +#else /* SEC_GCTL */ + +/* + * This function should be called during kernel startup to initialize + * the BFin IRQ handling routines. + */ + +int __init init_arch_irq(void) +{ + int irq; + unsigned long ilat = 0; + + bfin_write_SEC_GCTL(SEC_GCTL_RESET); + + local_irq_disable(); + + for (irq = 0; irq <= SYS_IRQS; irq++) { + if (irq <= IRQ_CORETMR) { + irq_set_chip_and_handler(irq, &bfin_core_irqchip, + handle_simple_irq); +#if defined(CONFIG_TICKSOURCE_CORETMR) && defined(CONFIG_SMP) + if (irq == IRQ_CORETMR) + irq_set_handler(irq, handle_percpu_irq); +#endif + } else if (irq >= BFIN_IRQ(34) && irq <= BFIN_IRQ(37)) { + irq_set_chip_and_handler(irq, &bfin_sec_irqchip, + handle_percpu_irq); + } else { + irq_set_chip(irq, &bfin_sec_irqchip); + irq_set_handler(irq, handle_fasteoi_irq); + __irq_set_preflow_handler(irq, bfin_sec_preflow_handler); + } + } + + bfin_write_IMASK(0); + CSYNC(); + ilat = bfin_read_ILAT(); + CSYNC(); + bfin_write_ILAT(ilat); + CSYNC(); + + printk(KERN_INFO "Configuring Blackfin Priority Driven Interrupts\n"); + + bfin_sec_set_priority(CONFIG_SEC_IRQ_PRIORITY_LEVELS, sec_int_priority); + + /* Enable interrupts IVG7-15 */ + bfin_irq_flags |= IMASK_IVG15 | + IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 | + IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW; + + + bfin_write_SEC_FCTL(SEC_FCTL_EN | SEC_FCTL_SYSRST_EN | SEC_FCTL_FLTIN_EN); + bfin_sec_enable_sci(BFIN_SYSIRQ(IRQ_WATCH0)); + bfin_sec_enable_ssi(BFIN_SYSIRQ(IRQ_WATCH0)); + bfin_write_SEC_SCI(0, SEC_CCTL, SEC_CCTL_RESET); + udelay(100); + bfin_write_SEC_GCTL(SEC_GCTL_EN); + bfin_write_SEC_SCI(0, SEC_CCTL, SEC_CCTL_EN | SEC_CCTL_NMI_EN); + bfin_write_SEC_SCI(1, SEC_CCTL, SEC_CCTL_EN | SEC_CCTL_NMI_EN); + + init_software_driven_irq(); + +#ifdef CONFIG_PM + register_syscore_ops(&sec_pm_syscore_ops); +#endif + + bfin_fault_irq.handler = bfin_fault_routine; +#ifdef CONFIG_L1_PARITY_CHECK + setup_irq(IRQ_C0_NMI_L1_PARITY_ERR, &bfin_fault_irq); +#endif + setup_irq(IRQ_C0_DBL_FAULT, &bfin_fault_irq); + setup_irq(IRQ_SEC_ERR, &bfin_fault_irq); + + return 0; +} + +#ifdef CONFIG_DO_IRQ_L1 +__attribute__((l1_text)) +#endif +static int vec_to_irq(int vec) +{ + if (likely(vec == EVT_IVTMR_P)) + return IRQ_CORETMR; + + return BFIN_IRQ(bfin_read_SEC_SCI(0, SEC_CSID)); +} +#endif /* SEC_GCTL */ + #ifdef CONFIG_DO_IRQ_L1 __attribute__((l1_text)) #endif @@ -1169,6 +1271,10 @@ int __ipipe_get_irq_priority(unsigned irq) if (irq <= IRQ_CORETMR) return irq; +#ifdef SEC_GCTL + if (irq >= BFIN_IRQ(0)) + return IVG11; +#else for (ient = 0; ient < NR_PERI_INTS; ient++) { struct ivgx *ivg = ivg_table + ient; if (ivg->irqno == irq) { @@ -1179,6 +1285,7 @@ int __ipipe_get_irq_priority(unsigned irq) } } } +#endif return IVG15; } @@ -1191,8 +1298,6 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs) { struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr(); struct ipipe_domain *this_domain = __ipipe_current_domain; - struct ivgx *ivg_stop = ivg7_13[vec-IVG7].istop; - struct ivgx *ivg = ivg7_13[vec-IVG7].ifirst; int irq, s = 0; irq = vec_to_irq(vec); diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c index 3c648a077e7..1387a94bcfd 100644 --- a/arch/blackfin/mach-common/pm.c +++ b/arch/blackfin/mach-common/pm.c @@ -19,20 +19,33 @@ #include <asm/gpio.h> #include <asm/dma.h> #include <asm/dpmc.h> +#include <asm/pm.h> +#ifdef CONFIG_BF60x +struct bfin_cpu_pm_fns *bfin_cpu_pm; +#endif void bfin_pm_suspend_standby_enter(void) { +#if !BFIN_GPIO_PINT bfin_pm_standby_setup(); +#endif -#ifdef CONFIG_PM_BFIN_SLEEP_DEEPER - sleep_deeper(bfin_sic_iwr[0], bfin_sic_iwr[1], bfin_sic_iwr[2]); +#ifdef CONFIG_BF60x + bfin_cpu_pm->enter(PM_SUSPEND_STANDBY); #else +# ifdef CONFIG_PM_BFIN_SLEEP_DEEPER + sleep_deeper(bfin_sic_iwr[0], bfin_sic_iwr[1], bfin_sic_iwr[2]); +# else sleep_mode(bfin_sic_iwr[0], bfin_sic_iwr[1], bfin_sic_iwr[2]); +# endif #endif +#if !BFIN_GPIO_PINT bfin_pm_standby_restore(); +#endif +#ifndef CONFIG_BF60x #ifdef SIC_IWR0 bfin_write_SIC_IWR0(IWR_DISABLE_ALL); # ifdef SIC_IWR1 @@ -52,6 +65,8 @@ void bfin_pm_suspend_standby_enter(void) #else bfin_write_SIC_IWR(IWR_DISABLE_ALL); #endif + +#endif } int bf53x_suspend_l1_mem(unsigned char *memptr) @@ -83,10 +98,13 @@ int bf53x_resume_l1_mem(unsigned char *memptr) } #if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK) +# ifdef CONFIG_BF60x +__attribute__((l1_text)) +# endif static void flushinv_all_dcache(void) { - u32 way, bank, subbank, set; - u32 status, addr; + register u32 way, bank, subbank, set; + register u32 status, addr; u32 dmem_ctl = bfin_read_DMEM_CONTROL(); for (bank = 0; bank < 2; ++bank) { @@ -110,6 +128,7 @@ static void flushinv_all_dcache(void) if ((status & 0x3) != 0x3) continue; + /* construct the address using the tag */ addr = (status & 0xFFFFC800) | (subbank << 12) | (set << 5); @@ -122,17 +141,21 @@ static void flushinv_all_dcache(void) int bfin_pm_suspend_mem_enter(void) { - int wakeup, ret; + int ret; +#ifndef CONFIG_BF60x + int wakeup; +#endif unsigned char *memptr = kmalloc(L1_CODE_LENGTH + L1_DATA_A_LENGTH + L1_DATA_B_LENGTH + L1_SCRATCH_LENGTH, - GFP_KERNEL); + GFP_ATOMIC); if (memptr == NULL) { panic("bf53x_suspend_l1_mem malloc failed"); return -ENOMEM; } +#ifndef CONFIG_BF60x wakeup = bfin_read_VR_CTL() & ~FREQ; wakeup |= SCKELOW; @@ -142,6 +165,7 @@ int bfin_pm_suspend_mem_enter(void) #ifdef CONFIG_PM_BFIN_WAKE_GP wakeup |= GPWE; #endif +#endif ret = blackfin_dma_suspend(); @@ -150,7 +174,9 @@ int bfin_pm_suspend_mem_enter(void) return ret; } +#ifdef CONFIG_GPIO_ADI bfin_gpio_pm_hibernate_suspend(); +#endif #if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK) flushinv_all_dcache(); @@ -159,14 +185,20 @@ int bfin_pm_suspend_mem_enter(void) _disable_icplb(); bf53x_suspend_l1_mem(memptr); +#ifndef CONFIG_BF60x do_hibernate(wakeup | vr_wakeup); /* See you later! */ +#else + bfin_cpu_pm->enter(PM_SUSPEND_MEM); +#endif bf53x_resume_l1_mem(memptr); _enable_icplb(); _enable_dcplb(); +#ifdef CONFIG_GPIO_ADI bfin_gpio_pm_hibernate_restore(); +#endif blackfin_dma_resume(); kfree(memptr); @@ -223,9 +255,39 @@ static int bfin_pm_enter(suspend_state_t state) return 0; } +#ifdef CONFIG_BFIN_PM_WAKEUP_TIME_BENCH +void bfin_pm_end(void) +{ + u32 cycle, cycle2; + u64 usec64; + u32 usec; + + __asm__ __volatile__ ( + "1: %0 = CYCLES2\n" + "%1 = CYCLES\n" + "%2 = CYCLES2\n" + "CC = %2 == %0\n" + "if ! CC jump 1b\n" + : "=d,a" (cycle2), "=d,a" (cycle), "=d,a" (usec) : : "CC" + ); + + usec64 = ((u64)cycle2 << 32) + cycle; + do_div(usec64, get_cclk() / USEC_PER_SEC); + usec = usec64; + if (usec == 0) + usec = 1; + + pr_info("PM: resume of kernel completes after %ld msec %03ld usec\n", + usec / USEC_PER_MSEC, usec % USEC_PER_MSEC); +} +#endif + static const struct platform_suspend_ops bfin_pm_ops = { .enter = bfin_pm_enter, .valid = bfin_pm_valid, +#ifdef CONFIG_BFIN_PM_WAKEUP_TIME_BENCH + .end = bfin_pm_end, +#endif }; static int __init bfin_pm_init(void) diff --git a/arch/blackfin/mach-common/scb-init.c b/arch/blackfin/mach-common/scb-init.c new file mode 100644 index 00000000000..8923398db66 --- /dev/null +++ b/arch/blackfin/mach-common/scb-init.c @@ -0,0 +1,52 @@ +/* + * arch/blackfin/mach-common/scb-init.c - reprogram system cross bar priority + * + * Copyright 2012 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <asm/scb.h> + +__attribute__((l1_text)) +inline void scb_mi_write(unsigned long scb_mi_arbw, unsigned int slots, + unsigned char *scb_mi_prio) +{ + unsigned int i; + + for (i = 0; i < slots; ++i) + bfin_write32(scb_mi_arbw, (i << SCB_SLOT_OFFSET) | scb_mi_prio[i]); +} + +__attribute__((l1_text)) +inline void scb_mi_read(unsigned long scb_mi_arbw, unsigned int slots, + unsigned char *scb_mi_prio) +{ + unsigned int i; + + for (i = 0; i < slots; ++i) { + bfin_write32(scb_mi_arbw, (0xFF << SCB_SLOT_OFFSET) | i); + scb_mi_prio[i] = bfin_read32(scb_mi_arbw); + } +} + +__attribute__((l1_text)) +void init_scb(void) +{ + unsigned int i, j; + unsigned char scb_tmp_prio[32]; + + pr_info("Init System Crossbar\n"); + for (i = 0; scb_data[i].scb_mi_arbr > 0; ++i) { + + scb_mi_write(scb_data[i].scb_mi_arbw, scb_data[i].scb_mi_slots, scb_data[i].scb_mi_prio); + + pr_debug("scb priority at 0x%lx:\n", scb_data[i].scb_mi_arbr); + scb_mi_read(scb_data[i].scb_mi_arbw, scb_data[i].scb_mi_slots, scb_tmp_prio); + for (j = 0; j < scb_data[i].scb_mi_slots; ++j) + pr_debug("slot %d = %d\n", j, scb_tmp_prio[j]); + } + +} diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c index ac8f8a43158..ba6c30d8534 100644 --- a/arch/blackfin/mach-common/smp.c +++ b/arch/blackfin/mach-common/smp.c @@ -46,12 +46,15 @@ struct corelock_slot corelock __attribute__ ((__section__(".l2.bss"))); unsigned long blackfin_iflush_l1_entry[NR_CPUS]; #endif -struct blackfin_initial_pda __cpuinitdata initial_pda_coreb; - -#define BFIN_IPI_TIMER 0 -#define BFIN_IPI_RESCHEDULE 1 -#define BFIN_IPI_CALL_FUNC 2 -#define BFIN_IPI_CPU_STOP 3 +struct blackfin_initial_pda initial_pda_coreb; + +enum ipi_message_type { + BFIN_IPI_NONE, + BFIN_IPI_TIMER, + BFIN_IPI_RESCHEDULE, + BFIN_IPI_CALL_FUNC, + BFIN_IPI_CPU_STOP, +}; struct blackfin_flush_data { unsigned long start; @@ -60,35 +63,20 @@ struct blackfin_flush_data { void *secondary_stack; - -struct smp_call_struct { - void (*func)(void *info); - void *info; - int wait; - cpumask_t *waitmask; -}; - static struct blackfin_flush_data smp_flush_data; static DEFINE_SPINLOCK(stop_lock); -struct ipi_message { - unsigned long type; - struct smp_call_struct call_struct; -}; - /* A magic number - stress test shows this is safe for common cases */ #define BFIN_IPI_MSGQ_LEN 5 /* Simple FIFO buffer, overflow leads to panic */ -struct ipi_message_queue { - spinlock_t lock; - unsigned long count; - unsigned long head; /* head of the queue */ - struct ipi_message ipi_message[BFIN_IPI_MSGQ_LEN]; +struct ipi_data { + atomic_t count; + atomic_t bits; }; -static DEFINE_PER_CPU(struct ipi_message_queue, ipi_msg_queue); +static DEFINE_PER_CPU(struct ipi_data, bfin_ipi); static void ipi_cpu_stop(unsigned int cpu) { @@ -129,28 +117,6 @@ static void ipi_flush_icache(void *info) blackfin_icache_flush_range(fdata->start, fdata->end); } -static void ipi_call_function(unsigned int cpu, struct ipi_message *msg) -{ - int wait; - void (*func)(void *info); - void *info; - func = msg->call_struct.func; - info = msg->call_struct.info; - wait = msg->call_struct.wait; - func(info); - if (wait) { -#ifdef __ARCH_SYNC_CORE_DCACHE - /* - * 'wait' usually means synchronization between CPUs. - * Invalidate D cache in case shared data was changed - * by func() to ensure cache coherence. - */ - resync_core_dcache(); -#endif - cpumask_clear_cpu(cpu, msg->call_struct.waitmask); - } -} - /* Use IRQ_SUPPLE_0 to request reschedule. * When returning from interrupt to user space, * there is chance to reschedule */ @@ -172,152 +138,92 @@ void ipi_timer(void) static irqreturn_t ipi_handler_int1(int irq, void *dev_instance) { - struct ipi_message *msg; - struct ipi_message_queue *msg_queue; + struct ipi_data *bfin_ipi_data; unsigned int cpu = smp_processor_id(); - unsigned long flags; + unsigned long pending; + unsigned long msg; platform_clear_ipi(cpu, IRQ_SUPPLE_1); - msg_queue = &__get_cpu_var(ipi_msg_queue); - - spin_lock_irqsave(&msg_queue->lock, flags); - - while (msg_queue->count) { - msg = &msg_queue->ipi_message[msg_queue->head]; - switch (msg->type) { - case BFIN_IPI_TIMER: - ipi_timer(); - break; - case BFIN_IPI_RESCHEDULE: - scheduler_ipi(); - break; - case BFIN_IPI_CALL_FUNC: - ipi_call_function(cpu, msg); - break; - case BFIN_IPI_CPU_STOP: - ipi_cpu_stop(cpu); - break; - default: - printk(KERN_CRIT "CPU%u: Unknown IPI message 0x%lx\n", - cpu, msg->type); - break; - } - msg_queue->head++; - msg_queue->head %= BFIN_IPI_MSGQ_LEN; - msg_queue->count--; + smp_rmb(); + bfin_ipi_data = &__get_cpu_var(bfin_ipi); + while ((pending = atomic_xchg(&bfin_ipi_data->bits, 0)) != 0) { + msg = 0; + do { + msg = find_next_bit(&pending, BITS_PER_LONG, msg + 1); + switch (msg) { + case BFIN_IPI_TIMER: + ipi_timer(); + break; + case BFIN_IPI_RESCHEDULE: + scheduler_ipi(); + break; + case BFIN_IPI_CALL_FUNC: + generic_smp_call_function_interrupt(); + break; + case BFIN_IPI_CPU_STOP: + ipi_cpu_stop(cpu); + break; + default: + goto out; + } + atomic_dec(&bfin_ipi_data->count); + } while (msg < BITS_PER_LONG); + } - spin_unlock_irqrestore(&msg_queue->lock, flags); +out: return IRQ_HANDLED; } -static void ipi_queue_init(void) +static void bfin_ipi_init(void) { unsigned int cpu; - struct ipi_message_queue *msg_queue; + struct ipi_data *bfin_ipi_data; for_each_possible_cpu(cpu) { - msg_queue = &per_cpu(ipi_msg_queue, cpu); - spin_lock_init(&msg_queue->lock); - msg_queue->count = 0; - msg_queue->head = 0; + bfin_ipi_data = &per_cpu(bfin_ipi, cpu); + atomic_set(&bfin_ipi_data->bits, 0); + atomic_set(&bfin_ipi_data->count, 0); } } -static inline void smp_send_message(cpumask_t callmap, unsigned long type, - void (*func) (void *info), void *info, int wait) +void send_ipi(const struct cpumask *cpumask, enum ipi_message_type msg) { unsigned int cpu; - struct ipi_message_queue *msg_queue; - struct ipi_message *msg; - unsigned long flags, next_msg; - cpumask_t waitmask; /* waitmask is shared by all cpus */ - - cpumask_copy(&waitmask, &callmap); - for_each_cpu(cpu, &callmap) { - msg_queue = &per_cpu(ipi_msg_queue, cpu); - spin_lock_irqsave(&msg_queue->lock, flags); - if (msg_queue->count < BFIN_IPI_MSGQ_LEN) { - next_msg = (msg_queue->head + msg_queue->count) - % BFIN_IPI_MSGQ_LEN; - msg = &msg_queue->ipi_message[next_msg]; - msg->type = type; - if (type == BFIN_IPI_CALL_FUNC) { - msg->call_struct.func = func; - msg->call_struct.info = info; - msg->call_struct.wait = wait; - msg->call_struct.waitmask = &waitmask; - } - msg_queue->count++; - } else - panic("IPI message queue overflow\n"); - spin_unlock_irqrestore(&msg_queue->lock, flags); - platform_send_ipi_cpu(cpu, IRQ_SUPPLE_1); - } + struct ipi_data *bfin_ipi_data; + unsigned long flags; - if (wait) { - while (!cpumask_empty(&waitmask)) - blackfin_dcache_invalidate_range( - (unsigned long)(&waitmask), - (unsigned long)(&waitmask)); -#ifdef __ARCH_SYNC_CORE_DCACHE - /* - * Invalidate D cache in case shared data was changed by - * other processors to ensure cache coherence. - */ - resync_core_dcache(); -#endif + local_irq_save(flags); + for_each_cpu(cpu, cpumask) { + bfin_ipi_data = &per_cpu(bfin_ipi, cpu); + atomic_set_mask((1 << msg), &bfin_ipi_data->bits); + atomic_inc(&bfin_ipi_data->count); } + local_irq_restore(flags); + smp_wmb(); + for_each_cpu(cpu, cpumask) + platform_send_ipi_cpu(cpu, IRQ_SUPPLE_1); } -int smp_call_function(void (*func)(void *info), void *info, int wait) +void arch_send_call_function_single_ipi(int cpu) { - cpumask_t callmap; - - preempt_disable(); - cpumask_copy(&callmap, cpu_online_mask); - cpumask_clear_cpu(smp_processor_id(), &callmap); - if (!cpumask_empty(&callmap)) - smp_send_message(callmap, BFIN_IPI_CALL_FUNC, func, info, wait); - - preempt_enable(); - - return 0; + send_ipi(cpumask_of(cpu), BFIN_IPI_CALL_FUNC); } -EXPORT_SYMBOL_GPL(smp_call_function); -int smp_call_function_single(int cpuid, void (*func) (void *info), void *info, - int wait) +void arch_send_call_function_ipi_mask(const struct cpumask *mask) { - unsigned int cpu = cpuid; - cpumask_t callmap; - - if (cpu_is_offline(cpu)) - return 0; - cpumask_clear(&callmap); - cpumask_set_cpu(cpu, &callmap); - - smp_send_message(callmap, BFIN_IPI_CALL_FUNC, func, info, wait); - - return 0; + send_ipi(mask, BFIN_IPI_CALL_FUNC); } -EXPORT_SYMBOL_GPL(smp_call_function_single); void smp_send_reschedule(int cpu) { - cpumask_t callmap; - /* simply trigger an ipi */ - - cpumask_clear(&callmap); - cpumask_set_cpu(cpu, &callmap); - - smp_send_message(callmap, BFIN_IPI_RESCHEDULE, NULL, NULL, 0); + send_ipi(cpumask_of(cpu), BFIN_IPI_RESCHEDULE); return; } void smp_send_msg(const struct cpumask *mask, unsigned long type) { - smp_send_message(*mask, type, NULL, NULL, 0); + send_ipi(mask, type); } void smp_timer_broadcast(const struct cpumask *mask) @@ -333,34 +239,17 @@ void smp_send_stop(void) cpumask_copy(&callmap, cpu_online_mask); cpumask_clear_cpu(smp_processor_id(), &callmap); if (!cpumask_empty(&callmap)) - smp_send_message(callmap, BFIN_IPI_CPU_STOP, NULL, NULL, 0); + send_ipi(&callmap, BFIN_IPI_CPU_STOP); preempt_enable(); return; } -int __cpuinit __cpu_up(unsigned int cpu) +int __cpu_up(unsigned int cpu, struct task_struct *idle) { int ret; - struct blackfin_cpudata *ci = &per_cpu(cpu_data, cpu); - struct task_struct *idle = ci->idle; - - if (idle) { - free_task(idle); - idle = NULL; - } - if (!idle) { - idle = fork_idle(cpu); - if (IS_ERR(idle)) { - printk(KERN_ERR "CPU%u: fork() failed\n", cpu); - return PTR_ERR(idle); - } - ci->idle = idle; - } else { - init_idle(idle, cpu); - } secondary_stack = task_stack_page(idle) + THREAD_SIZE; ret = platform_boot_secondary(cpu, idle); @@ -370,7 +259,7 @@ int __cpuinit __cpu_up(unsigned int cpu) return ret; } -static void __cpuinit setup_secondary(unsigned int cpu) +static void setup_secondary(unsigned int cpu) { unsigned long ilat; @@ -388,7 +277,7 @@ static void __cpuinit setup_secondary(unsigned int cpu) IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW; } -void __cpuinit secondary_start_kernel(void) +void secondary_start_kernel(void) { unsigned int cpu = smp_processor_id(); struct mm_struct *mm = &init_mm; @@ -427,7 +316,6 @@ void __cpuinit secondary_start_kernel(void) setup_secondary(cpu); platform_secondary_init(cpu); - /* setup local core timer */ bfin_local_timer_setup(); @@ -443,7 +331,9 @@ void __cpuinit secondary_start_kernel(void) */ calibrate_delay(); - cpu_idle(); + /* We are done with local CPU inits, unblock the boot CPU. */ + set_cpu_online(cpu, true); + cpu_startup_entry(CPUHP_ONLINE); } void __init smp_prepare_boot_cpu(void) @@ -453,7 +343,7 @@ void __init smp_prepare_boot_cpu(void) void __init smp_prepare_cpus(unsigned int max_cpus) { platform_prepare_cpus(max_cpus); - ipi_queue_init(); + bfin_ipi_init(); platform_request_ipi(IRQ_SUPPLE_0, ipi_handler_int0); platform_request_ipi(IRQ_SUPPLE_1, ipi_handler_int1); } @@ -512,7 +402,7 @@ EXPORT_SYMBOL(resync_core_dcache); #endif #ifdef CONFIG_HOTPLUG_CPU -int __cpuexit __cpu_disable(void) +int __cpu_disable(void) { unsigned int cpu = smp_processor_id(); @@ -525,7 +415,7 @@ int __cpuexit __cpu_disable(void) static DECLARE_COMPLETION(cpu_killed); -int __cpuexit __cpu_die(unsigned int cpu) +int __cpu_die(unsigned int cpu) { return wait_for_completion_timeout(&cpu_killed, 5000); } diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c index 78daae08491..166842de3dc 100644 --- a/arch/blackfin/mm/init.c +++ b/arch/blackfin/mm/init.c @@ -48,7 +48,7 @@ void __init paging_init(void) unsigned long zones_size[MAX_NR_ZONES] = { [0] = 0, - [ZONE_DMA] = (end_mem - PAGE_OFFSET) >> PAGE_SHIFT, + [ZONE_DMA] = (end_mem - CONFIG_PHY_RAM_BASE_ADDRESS) >> PAGE_SHIFT, [ZONE_NORMAL] = 0, #ifdef CONFIG_HIGHMEM [ZONE_HIGHMEM] = 0, @@ -60,7 +60,8 @@ void __init paging_init(void) pr_debug("free_area_init -> start_mem is %#lx virtual_end is %#lx\n", PAGE_ALIGN(memory_start), end_mem); - free_area_init(zones_size); + free_area_init_node(0, zones_size, + CONFIG_PHY_RAM_BASE_ADDRESS >> PAGE_SHIFT, NULL); } asmlinkage void __init init_pda(void) @@ -75,9 +76,6 @@ asmlinkage void __init init_pda(void) valid pointers to it. */ memset(&cpu_pda[cpu], 0, sizeof(cpu_pda[cpu])); - cpu_pda[0].next = &cpu_pda[1]; - cpu_pda[1].next = &cpu_pda[0]; - #ifdef CONFIG_EXCEPTION_L1_SCRATCH cpu_pda[cpu].ex_stack = (unsigned long *)(L1_SCRATCH_START + \ L1_SCRATCH_LENGTH); @@ -92,63 +90,24 @@ asmlinkage void __init init_pda(void) void __init mem_init(void) { - unsigned int codek = 0, datak = 0, initk = 0; - unsigned int reservedpages = 0, freepages = 0; - unsigned long tmp; - unsigned long start_mem = memory_start; - unsigned long end_mem = memory_end; - - end_mem &= PAGE_MASK; - high_memory = (void *)end_mem; - - start_mem = PAGE_ALIGN(start_mem); - max_mapnr = num_physpages = MAP_NR(high_memory); - printk(KERN_DEBUG "Kernel managed physical pages: %lu\n", num_physpages); - - /* This will put all memory onto the freelists. */ - totalram_pages = free_all_bootmem(); - - reservedpages = 0; - for (tmp = 0; tmp < max_mapnr; tmp++) - if (PageReserved(pfn_to_page(tmp))) - reservedpages++; - freepages = max_mapnr - reservedpages; - - /* do not count in kernel image between _rambase and _ramstart */ - reservedpages -= (_ramstart - _rambase) >> PAGE_SHIFT; -#if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263) - reservedpages += (_ramend - memory_end - DMA_UNCACHED_REGION) >> PAGE_SHIFT; -#endif + char buf[64]; - codek = (_etext - _stext) >> 10; - initk = (__init_end - __init_begin) >> 10; - datak = ((_ramstart - _rambase) >> 10) - codek - initk; + high_memory = (void *)(memory_end & PAGE_MASK); + max_mapnr = MAP_NR(high_memory); + printk(KERN_DEBUG "Kernel managed physical pages: %lu\n", max_mapnr); - printk(KERN_INFO - "Memory available: %luk/%luk RAM, " - "(%uk init code, %uk kernel code, %uk data, %uk dma, %uk reserved)\n", - (unsigned long) freepages << (PAGE_SHIFT-10), _ramend >> 10, - initk, codek, datak, DMA_UNCACHED_REGION >> 10, (reservedpages << (PAGE_SHIFT-10))); -} + /* This will put all low memory onto the freelists. */ + free_all_bootmem(); -static void __init free_init_pages(const char *what, unsigned long begin, unsigned long end) -{ - unsigned long addr; - /* next to check that the page we free is not a partial page */ - for (addr = begin; addr + PAGE_SIZE <= end; addr += PAGE_SIZE) { - ClearPageReserved(virt_to_page(addr)); - init_page_count(virt_to_page(addr)); - free_page(addr); - totalram_pages++; - } - printk(KERN_INFO "Freeing %s: %ldk freed\n", what, (end - begin) >> 10); + snprintf(buf, sizeof(buf) - 1, "%uK DMA", DMA_UNCACHED_REGION >> 10); + mem_init_print_info(buf); } #ifdef CONFIG_BLK_DEV_INITRD void __init free_initrd_mem(unsigned long start, unsigned long end) { #ifndef CONFIG_MPU - free_init_pages("initrd memory", start, end); + free_reserved_area((void *)start, (void *)end, -1, "initrd"); #endif } #endif @@ -156,10 +115,7 @@ void __init free_initrd_mem(unsigned long start, unsigned long end) void __init_refok free_initmem(void) { #if defined CONFIG_RAMKERNEL && !defined CONFIG_MPU - free_init_pages("unused kernel memory", - (unsigned long)(&__init_begin), - (unsigned long)(&__init_end)); - + free_initmem_default(-1); if (memory_start == (unsigned long)(&__init_end)) memory_start = (unsigned long)(&__init_begin); #endif diff --git a/arch/blackfin/mm/sram-alloc.c b/arch/blackfin/mm/sram-alloc.c index 29d98faa1ef..1f3b3ef3e10 100644 --- a/arch/blackfin/mm/sram-alloc.c +++ b/arch/blackfin/mm/sram-alloc.c @@ -186,9 +186,45 @@ static void __init l1_inst_sram_init(void) #endif } +#ifdef __ADSPBF60x__ +static irqreturn_t l2_ecc_err(int irq, void *dev_id) +{ + int status; + + printk(KERN_ERR "L2 ecc error happened\n"); + status = bfin_read32(L2CTL0_STAT); + if (status & 0x1) + printk(KERN_ERR "Core channel error type:0x%x, addr:0x%x\n", + bfin_read32(L2CTL0_ET0), bfin_read32(L2CTL0_EADDR0)); + if (status & 0x2) + printk(KERN_ERR "System channel error type:0x%x, addr:0x%x\n", + bfin_read32(L2CTL0_ET1), bfin_read32(L2CTL0_EADDR1)); + + status = status >> 8; + if (status) + printk(KERN_ERR "L2 Bank%d error, addr:0x%x\n", + status, bfin_read32(L2CTL0_ERRADDR0 + status)); + + panic("L2 Ecc error"); + return IRQ_HANDLED; +} +#endif + static void __init l2_sram_init(void) { #if L2_LENGTH != 0 + +#ifdef __ADSPBF60x__ + int ret; + + ret = request_irq(IRQ_L2CTL0_ECC_ERR, l2_ecc_err, 0, "l2-ecc-err", + NULL); + if (unlikely(ret < 0)) { + printk(KERN_INFO "Fail to request l2 ecc error interrupt"); + return; + } +#endif + free_l2_sram_head.next = kmem_cache_alloc(sram_piece_cache, GFP_KERNEL); if (!free_l2_sram_head.next) { |