diff options
Diffstat (limited to 'arch/blackfin/mach-common/head.S')
| -rw-r--r-- | arch/blackfin/mach-common/head.S | 142 |
1 files changed, 50 insertions, 92 deletions
diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S index cab0a0031ee..31515f0146f 100644 --- a/arch/blackfin/mach-common/head.S +++ b/arch/blackfin/mach-common/head.S @@ -31,6 +31,7 @@ ENDPROC(__init_clear_bss) ENTRY(__start) /* R0: argument of command line string, passed from uboot, save it */ R7 = R0; + /* Enable Cycle Counter and Nesting Of Interrupts */ #ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES R0 = SYSCFG_SNEN; @@ -38,114 +39,75 @@ ENTRY(__start) R0 = SYSCFG_SNEN | SYSCFG_CCEN; #endif SYSCFG = R0; - R0 = 0; - - /* Clear Out All the data and pointer Registers */ - R1 = R0; - R2 = R0; - R3 = R0; - R4 = R0; - R5 = R0; - R6 = R0; - P0 = R0; - P1 = R0; - P2 = R0; - P3 = R0; - P4 = R0; - P5 = R0; - - LC0 = r0; - LC1 = r0; - L0 = r0; - L1 = r0; - L2 = r0; - L3 = r0; + /* Optimization register tricks: keep a base value in the + * reserved P registers so we use the load/store with an + * offset syntax. R0 = [P5 + <constant>]; + * P5 - core MMR base + * R6 - 0 + */ + r6 = 0; + p5.l = 0; + p5.h = hi(COREMMR_BASE); - /* Clear Out All the DAG Registers */ - B0 = r0; - B1 = r0; - B2 = r0; - B3 = r0; + /* Zero out registers required by Blackfin ABI */ - I0 = r0; - I1 = r0; - I2 = r0; - I3 = r0; + /* Disable circular buffers */ + L0 = r6; + L1 = r6; + L2 = r6; + L3 = r6; - M0 = r0; - M1 = r0; - M2 = r0; - M3 = r0; + /* Disable hardware loops in case we were started by 'go' */ + LC0 = r6; + LC1 = r6; /* * Clear ITEST_COMMAND and DTEST_COMMAND registers, * Leaving these as non-zero can confuse the emulator */ - p0.L = LO(DTEST_COMMAND); - p0.H = HI(DTEST_COMMAND); - [p0] = R0; - [p0 + (ITEST_COMMAND - DTEST_COMMAND)] = R0; + [p5 + (DTEST_COMMAND - COREMMR_BASE)] = r6; + [p5 + (ITEST_COMMAND - COREMMR_BASE)] = r6; CSYNC; trace_buffer_init(p0,r0); - P0 = R1; - R0 = R1; /* Turn off the icache */ - p0.l = LO(IMEM_CONTROL); - p0.h = HI(IMEM_CONTROL); - R1 = [p0]; - R0 = ~ENICPLB; - R0 = R0 & R1; - [p0] = R0; + r1 = [p5 + (IMEM_CONTROL - COREMMR_BASE)]; + BITCLR (r1, ENICPLB_P); + [p5 + (IMEM_CONTROL - COREMMR_BASE)] = r1; SSYNC; /* Turn off the dcache */ - p0.l = LO(DMEM_CONTROL); - p0.h = HI(DMEM_CONTROL); - R1 = [p0]; - R0 = ~ENDCPLB; - R0 = R0 & R1; - [p0] = R0; + r1 = [p5 + (DMEM_CONTROL - COREMMR_BASE)]; + BITCLR (r1, ENDCPLB_P); + [p5 + (DMEM_CONTROL - COREMMR_BASE)] = r1; SSYNC; /* in case of double faults, save a few things */ - p0.l = _init_retx; - p0.h = _init_retx; - R0 = RETX; - [P0] = R0; - + p1.l = _initial_pda; + p1.h = _initial_pda; + r4 = RETX; #ifdef CONFIG_DEBUG_DOUBLEFAULT /* Only save these if we are storing them, * This happens here, since L1 gets clobbered * below */ GET_PDA(p0, r0); - r6 = [p0 + PDA_DF_RETX]; - p1.l = _init_saved_retx; - p1.h = _init_saved_retx; - [p1] = r6; - - r6 = [p0 + PDA_DF_DCPLB]; - p1.l = _init_saved_dcplb_fault_addr; - p1.h = _init_saved_dcplb_fault_addr; - [p1] = r6; - - r6 = [p0 + PDA_DF_ICPLB]; - p1.l = _init_saved_icplb_fault_addr; - p1.h = _init_saved_icplb_fault_addr; - [p1] = r6; - - r6 = [p0 + PDA_DF_SEQSTAT]; - p1.l = _init_saved_seqstat; - p1.h = _init_saved_seqstat; - [p1] = r6; + r0 = [p0 + PDA_DF_RETX]; + r1 = [p0 + PDA_DF_DCPLB]; + r2 = [p0 + PDA_DF_ICPLB]; + r3 = [p0 + PDA_DF_SEQSTAT]; + [p1 + PDA_INIT_DF_RETX] = r0; + [p1 + PDA_INIT_DF_DCPLB] = r1; + [p1 + PDA_INIT_DF_ICPLB] = r2; + [p1 + PDA_INIT_DF_SEQSTAT] = r3; #endif + [p1 + PDA_INIT_RETX] = r4; /* Initialize stack pointer */ - sp.l = _init_thread_union; - sp.h = _init_thread_union; + sp.l = _init_thread_union + THREAD_SIZE; + sp.h = _init_thread_union + THREAD_SIZE; fp = sp; usp = sp; @@ -155,7 +117,7 @@ ENTRY(__start) sti r0; #endif - r0 = 0 (x); + r0 = r6; /* Zero out all of the fun bss regions */ #if L1_DATA_A_LENGTH > 0 r1.l = __sbss_l1; @@ -186,6 +148,11 @@ ENTRY(__start) /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ call _bfin_relocate_l1_mem; + +#ifdef CONFIG_ROMKERNEL + call _bfin_relocate_xip_data; +#endif + #ifdef CONFIG_BFIN_KERNEL_CLOCK /* Only use on-chip scratch space for stack when absolutely required * to avoid Anomaly 05000227 ... we know the init_clocks() func only @@ -195,7 +162,7 @@ ENTRY(__start) sp.l = lo(KERNEL_CLOCK_STACK); sp.h = hi(KERNEL_CLOCK_STACK); call _init_clocks; - sp = usp; /* usp hasnt been touched, so restore from there */ + sp = usp; /* usp hasn't been touched, so restore from there */ #endif /* This section keeps the processor in supervisor mode @@ -205,11 +172,9 @@ ENTRY(__start) /* EVT15 = _real_start */ - p0.l = lo(EVT15); - p0.h = hi(EVT15); p1.l = _real_start; p1.h = _real_start; - [p0] = p1; + [p5 + (EVT15 - COREMMR_BASE)] = p1; csync; #ifdef CONFIG_EARLY_PRINTK @@ -245,24 +210,17 @@ ENDPROC(__start) ENTRY(_real_start) /* Enable nested interrupts */ [--sp] = reti; - /* watchdog off for now */ p0.l = lo(WDOG_CTL); p0.h = hi(WDOG_CTL); r0 = 0xAD6(z); w[p0] = r0; ssync; - /* Pass the u-boot arguments to the global value command line */ R0 = R7; call _cmdline_init; - /* Load the current thread pointer and stack */ - p1 = THREAD_SIZE + 4 (z); /* +4 is for reti loading */ - sp = sp + p1; - usp = sp; - fp = sp; - sp += -12; + sp += -12 + 4; /* +4 is for reti loading above */ call _init_pda sp += 12; jump.l _start_kernel; |