aboutsummaryrefslogtreecommitdiff
path: root/arch/blackfin/mach-bf609
diff options
context:
space:
mode:
Diffstat (limited to 'arch/blackfin/mach-bf609')
-rw-r--r--arch/blackfin/mach-bf609/Kconfig1707
-rw-r--r--arch/blackfin/mach-bf609/Makefile5
-rw-r--r--arch/blackfin/mach-bf609/boards/ezkit.c978
-rw-r--r--arch/blackfin/mach-bf609/clock.c48
-rw-r--r--arch/blackfin/mach-bf609/dpm.S157
-rw-r--r--arch/blackfin/mach-bf609/hibernate.S65
-rw-r--r--arch/blackfin/mach-bf609/include/mach/anomaly.h175
-rw-r--r--arch/blackfin/mach-bf609/include/mach/cdefBF60x_base.h2
-rw-r--r--arch/blackfin/mach-bf609/include/mach/defBF609.h271
-rw-r--r--arch/blackfin/mach-bf609/include/mach/defBF60x_base.h11
-rw-r--r--arch/blackfin/mach-bf609/include/mach/gpio.h10
-rw-r--r--arch/blackfin/mach-bf609/include/mach/irq.h9
-rw-r--r--arch/blackfin/mach-bf609/include/mach/pm.h10
-rw-r--r--arch/blackfin/mach-bf609/include/mach/portmux.h6
-rw-r--r--arch/blackfin/mach-bf609/ints-priority.c156
-rw-r--r--arch/blackfin/mach-bf609/pm.c131
-rw-r--r--arch/blackfin/mach-bf609/scb.c363
17 files changed, 3706 insertions, 398 deletions
diff --git a/arch/blackfin/mach-bf609/Kconfig b/arch/blackfin/mach-bf609/Kconfig
index 2cb72724377..6584190faeb 100644
--- a/arch/blackfin/mach-bf609/Kconfig
+++ b/arch/blackfin/mach-bf609/Kconfig
@@ -9,47 +9,1674 @@ source "arch/blackfin/mach-bf609/boards/Kconfig"
menu "BF609 Specific Configuration"
-comment "Pin Interrupt to Port Assignment"
-menu "Assignment"
-
-config PINTx_REASSIGN
- bool "Reprogram PINT Assignment"
- default y
- help
- The interrupt assignment registers controls the pin-to-interrupt
- assignment in a byte-wide manner. Each option allows you to select
- a set of pins (High/Low Byte) of an specific Port being mapped
- to one of the four PIN Interrupts IRQ_PINTx.
-
- You shouldn't change any of these unless you know exactly what you're doing.
- Please consult the Blackfin BF60x Processor Hardware Reference Manual.
-
-config PINT0_ASSIGN
- hex "PINT0_ASSIGN"
- depends on PINTx_REASSIGN
- default 0x00000101
-config PINT1_ASSIGN
- hex "PINT1_ASSIGN"
- depends on PINTx_REASSIGN
- default 0x00000101
-config PINT2_ASSIGN
- hex "PINT2_ASSIGN"
- depends on PINTx_REASSIGN
- default 0x00000101
-config PINT3_ASSIGN
- hex "PINT3_ASSIGN"
- depends on PINTx_REASSIGN
- default 0x00000101
-config PINT4_ASSIGN
- hex "PINT3_ASSIGN"
- depends on PINTx_REASSIGN
- default 0x00000101
-config PINT5_ASSIGN
- hex "PINT3_ASSIGN"
- depends on PINTx_REASSIGN
- default 0x00000101
+config SEC_IRQ_PRIORITY_LEVELS
+ int "SEC interrupt priority levels"
+ default 7
+ range 0 7
+ help
+ Divide the total number of interrupt priority levels into sub-levels.
+ There is 2 ^ (SEC_IRQ_PRIORITY_LEVELS + 1) different levels.
-endmenu
+config L1_PARITY_CHECK
+ bool "Enable L1 parity check"
+ default n
+ help
+ Enable the L1 parity check in L1 sram. A fault event is raised
+ when L1 parity error is found.
+
+comment "System Cross Bar Priority Assignment"
+
+config SCB_PRIORITY
+ bool "Init System Cross Bar Priority"
+ default n
+
+menuconfig SCB0_MI0
+ bool "SCB0 Master Interface 0 (DDR)"
+ default n
+ depends on SCB_PRIORITY
+ help
+ The slave interface id of each slot should be set according following table.
+ Core 0 -- 0
+ Core 1 -- 2
+ SCB1 -- 9
+ SCB2 -- 10
+ SCB3 -- 11
+ SCB4 -- 12
+ SCB5 -- 5
+ SCB6 -- 6
+ SCB7 -- 8
+ SCB8 -- 7
+ SCB9 -- 4
+ USB -- 13
+
+if SCB0_MI0
+
+config SCB0_MI0_SLOT0
+ int "Slot 0 slave interface id"
+ default 0
+ range 0 13
+
+config SCB0_MI0_SLOT1
+ int "Slot 1 slave interface id"
+ default 2
+ range 0 13
+
+config SCB0_MI0_SLOT2
+ int "Slot 2 slave interface id"
+ default 4
+ range 0 13
+
+config SCB0_MI0_SLOT3
+ int "Slot 3 slave interface id"
+ default 5
+ range 0 13
+
+config SCB0_MI0_SLOT4
+ int "Slot 4 slave interface id"
+ default 6
+ range 0 13
+
+config SCB0_MI0_SLOT5
+ int "Slot 5 slave interface id"
+ default 7
+ range 0 13
+
+config SCB0_MI0_SLOT6
+ int "Slot 6 slave interface id"
+ default 8
+ range 0 13
+
+config SCB0_MI0_SLOT7
+ int "Slot 7 slave interface id"
+ default 9
+ range 0 13
+
+config SCB0_MI0_SLOT8
+ int "Slot 8 slave interface id"
+ default 10
+ range 0 13
+
+config SCB0_MI0_SLOT9
+ int "Slot 9 slave interface id"
+ default 11
+ range 0 13
+
+config SCB0_MI0_SLOT10
+ int "Slot 10 slave interface id"
+ default 13
+ range 0 13
+
+config SCB0_MI0_SLOT11
+ int "Slot 11 slave interface id"
+ default 12
+ range 0 13
+
+config SCB0_MI0_SLOT12
+ int "Slot 12 slave interface id"
+ default 0
+ range 0 13
+
+config SCB0_MI0_SLOT13
+ int "Slot 13 slave interface id"
+ default 2
+ range 0 13
+
+config SCB0_MI0_SLOT14
+ int "Slot 14 slave interface id"
+ default 4
+ range 0 13
+
+config SCB0_MI0_SLOT15
+ int "Slot 15 slave interface id"
+ default 5
+ range 0 13
+
+config SCB0_MI0_SLOT16
+ int "Slot 16 slave interface id"
+ default 6
+ range 0 13
+
+config SCB0_MI0_SLOT17
+ int "Slot 17 slave interface id"
+ default 7
+ range 0 13
+
+config SCB0_MI0_SLOT18
+ int "Slot 18 slave interface id"
+ default 8
+ range 0 13
+
+config SCB0_MI0_SLOT19
+ int "Slot 19 slave interface id"
+ default 9
+ range 0 13
+
+config SCB0_MI0_SLOT20
+ int "Slot 20 slave interface id"
+ default 10
+ range 0 13
+
+config SCB0_MI0_SLOT21
+ int "Slot 21 slave interface id"
+ default 11
+ range 0 13
+
+config SCB0_MI0_SLOT22
+ int "Slot 22 slave interface id"
+ default 13
+ range 0 13
+
+config SCB0_MI0_SLOT23
+ int "Slot 23 slave interface id"
+ default 12
+ range 0 13
+
+config SCB0_MI0_SLOT24
+ int "Slot 24 slave interface id"
+ default 0
+ range 0 13
+
+config SCB0_MI0_SLOT25
+ int "Slot 25 slave interface id"
+ default 2
+ range 0 13
+
+config SCB0_MI0_SLOT26
+ int "Slot 26 slave interface id"
+ default 4
+ range 0 13
+
+config SCB0_MI0_SLOT27
+ int "Slot 27 slave interface id"
+ default 5
+ range 0 13
+
+config SCB0_MI0_SLOT28
+ int "Slot 28 slave interface id"
+ default 6
+ range 0 13
+
+config SCB0_MI0_SLOT29
+ int "Slot 29 slave interface id"
+ default 7
+ range 0 13
+
+config SCB0_MI0_SLOT30
+ int "Slot 30 slave interface id"
+ default 8
+ range 0 13
+
+config SCB0_MI0_SLOT31
+ int "Slot 31 slave interface id"
+ default 13
+ range 0 13
+
+endif # SCB0_MI0
+
+menuconfig SCB0_MI1
+ bool "SCB0 Master Interface 1 (SMC)"
+ default n
+ depends on SCB_PRIORITY
+ help
+ The slave interface id of each slot should be set according following table.
+ Core 0 -- 0
+ Core 1 -- 2
+ SCB1 -- 9
+ SCB2 -- 10
+ SCB3 -- 11
+ SCB4 -- 12
+ SCB5 -- 5
+ SCB6 -- 6
+ SCB7 -- 8
+ SCB8 -- 7
+ SCB9 -- 4
+ USB -- 13
+
+if SCB0_MI1
+
+config SCB0_MI1_SLOT0
+ int "Slot 0 slave interface id"
+ default 0
+ range 0 13
+
+config SCB0_MI1_SLOT1
+ int "Slot 1 slave interface id"
+ default 2
+ range 0 13
+
+config SCB0_MI1_SLOT2
+ int "Slot 2 slave interface id"
+ default 4
+ range 0 13
+
+config SCB0_MI1_SLOT3
+ int "Slot 3 slave interface id"
+ default 5
+ range 0 13
+
+config SCB0_MI1_SLOT4
+ int "Slot 4 slave interface id"
+ default 6
+ range 0 13
+
+config SCB0_MI1_SLOT5
+ int "Slot 5 slave interface id"
+ default 7
+ range 0 13
+
+config SCB0_MI1_SLOT6
+ int "Slot 6 slave interface id"
+ default 8
+ range 0 13
+
+config SCB0_MI1_SLOT7
+ int "Slot 7 slave interface id"
+ default 9
+ range 0 13
+
+config SCB0_MI1_SLOT8
+ int "Slot 8 slave interface id"
+ default 10
+ range 0 13
+
+config SCB0_MI1_SLOT9
+ int "Slot 9 slave interface id"
+ default 11
+ range 0 13
+
+config SCB0_MI1_SLOT10
+ int "Slot 10 slave interface id"
+ default 13
+ range 0 13
+
+config SCB0_MI1_SLOT11
+ int "Slot 11 slave interface id"
+ default 12
+ range 0 13
+
+config SCB0_MI1_SLOT12
+ int "Slot 12 slave interface id"
+ default 0
+ range 0 13
+
+config SCB0_MI1_SLOT13
+ int "Slot 13 slave interface id"
+ default 2
+ range 0 13
+
+config SCB0_MI1_SLOT14
+ int "Slot 14 slave interface id"
+ default 4
+ range 0 13
+
+config SCB0_MI1_SLOT15
+ int "Slot 15 slave interface id"
+ default 5
+ range 0 13
+
+config SCB0_MI1_SLOT16
+ int "Slot 16 slave interface id"
+ default 6
+ range 0 13
+
+config SCB0_MI1_SLOT17
+ int "Slot 17 slave interface id"
+ default 7
+ range 0 13
+
+config SCB0_MI1_SLOT18
+ int "Slot 18 slave interface id"
+ default 8
+ range 0 13
+
+config SCB0_MI1_SLOT19
+ int "Slot 19 slave interface id"
+ default 9
+ range 0 13
+
+config SCB0_MI1_SLOT20
+ int "Slot 20 slave interface id"
+ default 10
+ range 0 13
+
+config SCB0_MI1_SLOT21
+ int "Slot 21 slave interface id"
+ default 11
+ range 0 13
+
+config SCB0_MI1_SLOT22
+ int "Slot 22 slave interface id"
+ default 13
+ range 0 13
+
+config SCB0_MI1_SLOT23
+ int "Slot 23 slave interface id"
+ default 12
+ range 0 13
+
+config SCB0_MI1_SLOT24
+ int "Slot 24 slave interface id"
+ default 0
+ range 0 13
+
+config SCB0_MI1_SLOT25
+ int "Slot 25 slave interface id"
+ default 2
+ range 0 13
+
+config SCB0_MI1_SLOT26
+ int "Slot 26 slave interface id"
+ default 4
+ range 0 13
+
+config SCB0_MI1_SLOT27
+ int "Slot 27 slave interface id"
+ default 5
+ range 0 13
+
+config SCB0_MI1_SLOT28
+ int "Slot 28 slave interface id"
+ default 6
+ range 0 13
+
+config SCB0_MI1_SLOT29
+ int "Slot 29 slave interface id"
+ default 7
+ range 0 13
+
+config SCB0_MI1_SLOT30
+ int "Slot 30 slave interface id"
+ default 8
+ range 0 13
+
+config SCB0_MI1_SLOT31
+ int "Slot 31 slave interface id"
+ default 13
+ range 0 13
+
+endif # SCB0_MI1
+
+menuconfig SCB0_MI2
+ bool "SCB0 Master Interface 2 (Data L2)"
+ default n
+ depends on SCB_PRIORITY
+ help
+ The slave interface id of each slot should be set according following table.
+ Core 0 -- 0
+ Core 1 -- 2
+ SCB1 -- 9
+ SCB2 -- 10
+ SCB3 -- 11
+ SCB4 -- 12
+ SCB5 -- 5
+ SCB6 -- 6
+ SCB7 -- 8
+ SCB8 -- 7
+ SCB9 -- 4
+ USB -- 13
+
+if SCB0_MI2
+
+config SCB0_MI2_SLOT0
+ int "Slot 0 slave interface id"
+ default 4
+ range 0 13
+
+config SCB0_MI2_SLOT1
+ int "Slot 1 slave interface id"
+ default 5
+ range 0 13
+
+config SCB0_MI2_SLOT2
+ int "Slot 2 slave interface id"
+ default 6
+ range 0 13
+
+config SCB0_MI2_SLOT3
+ int "Slot 3 slave interface id"
+ default 7
+ range 0 13
+
+config SCB0_MI2_SLOT4
+ int "Slot 4 slave interface id"
+ default 8
+ range 0 13
+
+config SCB0_MI2_SLOT5
+ int "Slot 5 slave interface id"
+ default 9
+ range 0 13
+
+config SCB0_MI2_SLOT6
+ int "Slot 6 slave interface id"
+ default 10
+ range 0 13
+
+config SCB0_MI2_SLOT7
+ int "Slot 7 slave interface id"
+ default 11
+ range 0 13
+
+config SCB0_MI2_SLOT8
+ int "Slot 8 slave interface id"
+ default 13
+ range 0 13
+
+config SCB0_MI2_SLOT9
+ int "Slot 9 slave interface id"
+ default 12
+ range 0 13
+
+config SCB0_MI2_SLOT10
+ int "Slot 10 slave interface id"
+ default 4
+ range 0 13
+
+config SCB0_MI2_SLOT11
+ int "Slot 11 slave interface id"
+ default 5
+ range 0 13
+
+config SCB0_MI2_SLOT12
+ int "Slot 12 slave interface id"
+ default 6
+ range 0 13
+
+config SCB0_MI2_SLOT13
+ int "Slot 13 slave interface id"
+ default 7
+ range 0 13
+
+config SCB0_MI2_SLOT14
+ int "Slot 14 slave interface id"
+ default 8
+ range 0 13
+
+config SCB0_MI2_SLOT15
+ int "Slot 15 slave interface id"
+ default 9
+ range 0 13
+
+config SCB0_MI2_SLOT16
+ int "Slot 16 slave interface id"
+ default 10
+ range 0 13
+
+config SCB0_MI2_SLOT17
+ int "Slot 17 slave interface id"
+ default 11
+ range 0 13
+
+config SCB0_MI2_SLOT18
+ int "Slot 18 slave interface id"
+ default 13
+ range 0 13
+
+config SCB0_MI2_SLOT19
+ int "Slot 19 slave interface id"
+ default 12
+ range 0 13
+
+config SCB0_MI2_SLOT20
+ int "Slot 20 slave interface id"
+ default 4
+ range 0 13
+
+config SCB0_MI2_SLOT21
+ int "Slot 21 slave interface id"
+ default 5
+ range 0 13
+
+config SCB0_MI2_SLOT22
+ int "Slot 22 slave interface id"
+ default 6
+ range 0 13
+
+config SCB0_MI2_SLOT23
+ int "Slot 23 slave interface id"
+ default 7
+ range 0 13
+
+config SCB0_MI2_SLOT24
+ int "Slot 24 slave interface id"
+ default 8
+ range 0 13
+
+config SCB0_MI2_SLOT25
+ int "Slot 25 slave interface id"
+ default 9
+ range 0 13
+
+config SCB0_MI2_SLOT26
+ int "Slot 26 slave interface id"
+ default 10
+ range 0 13
+
+config SCB0_MI2_SLOT27
+ int "Slot 27 slave interface id"
+ default 11
+ range 0 13
+
+config SCB0_MI2_SLOT28
+ int "Slot 28 slave interface id"
+ default 13
+ range 0 13
+
+config SCB0_MI2_SLOT29
+ int "Slot 29 slave interface id"
+ default 12
+ range 0 13
+
+config SCB0_MI2_SLOT30
+ int "Slot 30 slave interface id"
+ default 4
+ range 0 13
+
+config SCB0_MI2_SLOT31
+ int "Slot 31 slave interface id"
+ default 7
+ range 0 13
+
+endif # SCB0_MI2
+
+menuconfig SCB0_MI3
+ bool "SCB0 Master Interface 3 (L1A)"
+ default n
+ depends on SCB_PRIORITY
+ help
+ The slave interface id of each slot should be set according following table.
+ Core 0 -- 0
+ Core 1 -- 2
+ SCB1 -- 9
+ SCB2 -- 10
+ SCB3 -- 11
+ SCB4 -- 12
+ SCB5 -- 5
+ SCB6 -- 6
+ SCB7 -- 8
+ SCB8 -- 7
+ SCB9 -- 4
+ USB -- 13
+
+if SCB0_MI3
+
+config SCB0_MI3_SLOT0
+ int "Slot 0 slave interface id"
+ default 4
+ range 0 13
+
+config SCB0_MI3_SLOT1
+ int "Slot 1 slave interface id"
+ default 5
+ range 0 13
+
+config SCB0_MI3_SLOT2
+ int "Slot 2 slave interface id"
+ default 6
+ range 0 13
+
+config SCB0_MI3_SLOT3
+ int "Slot 3 slave interface id"
+ default 7
+ range 0 13
+
+config SCB0_MI3_SLOT4
+ int "Slot 4 slave interface id"
+ default 8
+ range 0 13
+
+config SCB0_MI3_SLOT5
+ int "Slot 5 slave interface id"
+ default 9
+ range 0 13
+
+config SCB0_MI3_SLOT6
+ int "Slot 6 slave interface id"
+ default 10
+ range 0 13
+
+config SCB0_MI3_SLOT7
+ int "Slot 7 slave interface id"
+ default 11
+ range 0 13
+
+config SCB0_MI3_SLOT8
+ int "Slot 8 slave interface id"
+ default 13
+ range 0 13
+
+config SCB0_MI3_SLOT9
+ int "Slot 9 slave interface id"
+ default 12
+ range 0 13
+
+config SCB0_MI3_SLOT10
+ int "Slot 10 slave interface id"
+ default 4
+ range 0 13
+
+config SCB0_MI3_SLOT11
+ int "Slot 11 slave interface id"
+ default 5
+ range 0 13
+
+config SCB0_MI3_SLOT12
+ int "Slot 12 slave interface id"
+ default 6
+ range 0 13
+
+config SCB0_MI3_SLOT13
+ int "Slot 13 slave interface id"
+ default 7
+ range 0 13
+
+config SCB0_MI3_SLOT14
+ int "Slot 14 slave interface id"
+ default 8
+ range 0 13
+
+config SCB0_MI3_SLOT15
+ int "Slot 15 slave interface id"
+ default 9
+ range 0 13
+
+config SCB0_MI3_SLOT16
+ int "Slot 16 slave interface id"
+ default 10
+ range 0 13
+
+config SCB0_MI3_SLOT17
+ int "Slot 17 slave interface id"
+ default 11
+ range 0 13
+
+config SCB0_MI3_SLOT18
+ int "Slot 18 slave interface id"
+ default 13
+ range 0 13
+
+config SCB0_MI3_SLOT19
+ int "Slot 19 slave interface id"
+ default 12
+ range 0 13
+
+config SCB0_MI3_SLOT20
+ int "Slot 20 slave interface id"
+ default 4
+ range 0 13
+
+config SCB0_MI3_SLOT21
+ int "Slot 21 slave interface id"
+ default 5
+ range 0 13
+
+config SCB0_MI3_SLOT22
+ int "Slot 22 slave interface id"
+ default 6
+ range 0 13
+
+config SCB0_MI3_SLOT23
+ int "Slot 23 slave interface id"
+ default 7
+ range 0 13
+
+config SCB0_MI3_SLOT24
+ int "Slot 24 slave interface id"
+ default 8
+ range 0 13
+
+config SCB0_MI3_SLOT25
+ int "Slot 25 slave interface id"
+ default 9
+ range 0 13
+
+config SCB0_MI3_SLOT26
+ int "Slot 26 slave interface id"
+ default 10
+ range 0 13
+
+config SCB0_MI3_SLOT27
+ int "Slot 27 slave interface id"
+ default 11
+ range 0 13
+
+config SCB0_MI3_SLOT28
+ int "Slot 28 slave interface id"
+ default 13
+ range 0 13
+
+config SCB0_MI3_SLOT29
+ int "Slot 29 slave interface id"
+ default 12
+ range 0 13
+
+config SCB0_MI3_SLOT30
+ int "Slot 30 slave interface id"
+ default 4
+ range 0 13
+
+config SCB0_MI3_SLOT31
+ int "Slot 31 slave interface id"
+ default 7
+ range 0 13
+
+endif # SCB0_MI3
+
+menuconfig SCB0_MI4
+ bool "SCB0 Master Interface 4 (L1B)"
+ default n
+ depends on SCB_PRIORITY
+ help
+ The slave interface id of each slot should be set according following table.
+ Core 0 -- 0
+ Core 1 -- 2
+ SCB1 -- 9
+ SCB2 -- 10
+ SCB3 -- 11
+ SCB4 -- 12
+ SCB5 -- 5
+ SCB6 -- 6
+ SCB7 -- 8
+ SCB8 -- 7
+ SCB9 -- 4
+ USB -- 13
+
+if SCB0_MI4
+
+config SCB0_MI4_SLOT0
+ int "Slot 0 slave interface id"
+ default 4
+ range 0 13
+
+config SCB0_MI4_SLOT1
+ int "Slot 1 slave interface id"
+ default 5
+ range 0 13
+
+config SCB0_MI4_SLOT2
+ int "Slot 2 slave interface id"
+ default 6
+ range 0 13
+
+config SCB0_MI4_SLOT3
+ int "Slot 3 slave interface id"
+ default 7
+ range 0 13
+
+config SCB0_MI4_SLOT4
+ int "Slot 4 slave interface id"
+ default 8
+ range 0 13
+
+config SCB0_MI4_SLOT5
+ int "Slot 5 slave interface id"
+ default 9
+ range 0 13
+
+config SCB0_MI4_SLOT6
+ int "Slot 6 slave interface id"
+ default 10
+ range 0 13
+
+config SCB0_MI4_SLOT7
+ int "Slot 7 slave interface id"
+ default 11
+ range 0 13
+
+config SCB0_MI4_SLOT8
+ int "Slot 8 slave interface id"
+ default 13
+ range 0 13
+
+config SCB0_MI4_SLOT9
+ int "Slot 9 slave interface id"
+ default 12
+ range 0 13
+
+config SCB0_MI4_SLOT10
+ int "Slot 10 slave interface id"
+ default 4
+ range 0 13
+
+config SCB0_MI4_SLOT11
+ int "Slot 11 slave interface id"
+ default 5
+ range 0 13
+
+config SCB0_MI4_SLOT12
+ int "Slot 12 slave interface id"
+ default 6
+ range 0 13
+
+config SCB0_MI4_SLOT13
+ int "Slot 13 slave interface id"
+ default 7
+ range 0 13
+
+config SCB0_MI4_SLOT14
+ int "Slot 14 slave interface id"
+ default 8
+ range 0 13
+
+config SCB0_MI4_SLOT15
+ int "Slot 15 slave interface id"
+ default 9
+ range 0 13
+
+config SCB0_MI4_SLOT16
+ int "Slot 16 slave interface id"
+ default 10
+ range 0 13
+
+config SCB0_MI4_SLOT17
+ int "Slot 17 slave interface id"
+ default 11
+ range 0 13
+
+config SCB0_MI4_SLOT18
+ int "Slot 18 slave interface id"
+ default 13
+ range 0 13
+
+config SCB0_MI4_SLOT19
+ int "Slot 19 slave interface id"
+ default 12
+ range 0 13
+
+config SCB0_MI4_SLOT20
+ int "Slot 20 slave interface id"
+ default 4
+ range 0 13
+
+config SCB0_MI4_SLOT21
+ int "Slot 21 slave interface id"
+ default 5
+ range 0 13
+
+config SCB0_MI4_SLOT22
+ int "Slot 22 slave interface id"
+ default 6
+ range 0 13
+
+config SCB0_MI4_SLOT23
+ int "Slot 23 slave interface id"
+ default 7
+ range 0 13
+
+config SCB0_MI4_SLOT24
+ int "Slot 24 slave interface id"
+ default 8
+ range 0 13
+
+config SCB0_MI4_SLOT25
+ int "Slot 25 slave interface id"
+ default 9
+ range 0 13
+
+config SCB0_MI4_SLOT26
+ int "Slot 26 slave interface id"
+ default 10
+ range 0 13
+
+config SCB0_MI4_SLOT27
+ int "Slot 27 slave interface id"
+ default 11
+ range 0 13
+
+config SCB0_MI4_SLOT28
+ int "Slot 28 slave interface id"
+ default 13
+ range 0 13
+
+config SCB0_MI4_SLOT29
+ int "Slot 29 slave interface id"
+ default 12
+ range 0 13
+
+config SCB0_MI4_SLOT30
+ int "Slot 30 slave interface id"
+ default 4
+ range 0 13
+
+config SCB0_MI4_SLOT31
+ int "Slot 31 slave interface id"
+ default 7
+ range 0 13
+
+endif # SCB0_MI4
+
+menuconfig SCB0_MI5
+ bool "SCB0 Master Interface 5 (SMMR)"
+ default n
+ depends on SCB_PRIORITY
+ help
+ The slave interface id of each slot should be set according following table.
+ MMR0 -- 1
+ MMR1 -- 3
+ SCB2 -- 10
+ SCB4 -- 12
+
+if SCB0_MI5
+
+config SCB0_MI5_SLOT0
+ int "Slot 0 slave interface id"
+ default 1
+ range 0 13
+
+config SCB0_MI5_SLOT1
+ int "Slot 1 slave interface id"
+ default 3
+ range 0 13
+
+config SCB0_MI5_SLOT2
+ int "Slot 2 slave interface id"
+ default 10
+ range 0 13
+
+config SCB0_MI5_SLOT3
+ int "Slot 3 slave interface id"
+ default 12
+ range 0 13
+
+config SCB0_MI5_SLOT4
+ int "Slot 4 slave interface id"
+ default 1
+ range 0 13
+
+config SCB0_MI5_SLOT5
+ int "Slot 5 slave interface id"
+ default 3
+ range 0 13
+
+config SCB0_MI5_SLOT6
+ int "Slot 6 slave interface id"
+ default 10
+ range 0 13
+
+config SCB0_MI5_SLOT7
+ int "Slot 7 slave interface id"
+ default 12
+ range 0 13
+
+config SCB0_MI5_SLOT8
+ int "Slot 8 slave interface id"
+ default 1
+ range 0 13
+
+config SCB0_MI5_SLOT9
+ int "Slot 9 slave interface id"
+ default 3
+ range 0 13
+
+config SCB0_MI5_SLOT10
+ int "Slot 10 slave interface id"
+ default 10
+ range 0 13
+
+config SCB0_MI5_SLOT11
+ int "Slot 11 slave interface id"
+ default 12
+ range 0 13
+
+config SCB0_MI5_SLOT12
+ int "Slot 12 slave interface id"
+ default 1
+ range 0 13
+
+config SCB0_MI5_SLOT13
+ int "Slot 13 slave interface id"
+ default 3
+ range 0 13
+
+config SCB0_MI5_SLOT14
+ int "Slot 14 slave interface id"
+ default 10
+ range 0 13
+
+config SCB0_MI5_SLOT15
+ int "Slot 15 slave interface id"
+ default 12
+ range 0 13
+
+endif # SCB0_MI5
+
+menuconfig SCB1_MI0
+ bool "SCB1 Master Interface 0"
+ default n
+ depends on SCB_PRIORITY
+ help
+ The slave interface id of each slot should be set according following table.
+ SPORT0A -- 0
+ SPORT0B -- 1
+ SPORT1A -- 2
+ SPORT1B -- 3
+ SPORT2A -- 4
+ SPORT2B -- 5
+ SPI0TX -- 6
+ SPI0RX -- 7
+ SPI1TX -- 8
+ SPI1RX -- 9
+
+if SCB1_MI0
+
+config SCB1_MI0_SLOT0
+ int "Slot 0 slave interface id"
+ default 0
+ range 0 9
+
+config SCB1_MI0_SLOT1
+ int "Slot 1 slave interface id"
+ default 1
+ range 0 9
+
+config SCB1_MI0_SLOT2
+ int "Slot 2 slave interface id"
+ default 2
+ range 0 9
+
+config SCB1_MI0_SLOT3
+ int "Slot 3 slave interface id"
+ default 3
+ range 0 9
+
+config SCB1_MI0_SLOT4
+ int "Slot 4 slave interface id"
+ default 4
+ range 0 9
+
+config SCB1_MI0_SLOT5
+ int "Slot 5 slave interface id"
+ default 5
+ range 0 9
+
+config SCB1_MI0_SLOT6
+ int "Slot 6 slave interface id"
+ default 6
+ range 0 9
+
+config SCB1_MI0_SLOT7
+ int "Slot 7 slave interface id"
+ default 7
+ range 0 9
+
+config SCB1_MI0_SLOT8
+ int "Slot 8 slave interface id"
+ default 8
+ range 0 9
+
+config SCB1_MI0_SLOT9
+ int "Slot 9 slave interface id"
+ default 9
+ range 0 9
+
+config SCB1_MI0_SLOT10
+ int "Slot 10 slave interface id"
+ default 0
+ range 0 9
+
+config SCB1_MI0_SLOT11
+ int "Slot 11 slave interface id"
+ default 1
+ range 0 9
+
+config SCB1_MI0_SLOT12
+ int "Slot 12 slave interface id"
+ default 2
+ range 0 9
+
+config SCB1_MI0_SLOT13
+ int "Slot 13 slave interface id"
+ default 3
+ range 0 9
+
+config SCB1_MI0_SLOT14
+ int "Slot 14 slave interface id"
+ default 4
+ range 0 9
+
+config SCB1_MI0_SLOT15
+ int "Slot 15 slave interface id"
+ default 5
+ range 0 9
+
+config SCB1_MI0_SLOT16
+ int "Slot 16 slave interface id"
+ default 6
+ range 0 13
+
+config SCB1_MI0_SLOT17
+ int "Slot 17 slave interface id"
+ default 7
+ range 0 13
+
+config SCB1_MI0_SLOT18
+ int "Slot 18 slave interface id"
+ default 8
+ range 0 13
+
+config SCB1_MI0_SLOT19
+ int "Slot 19 slave interface id"
+ default 9
+ range 0 13
+
+endif # SCB1_MI0
+
+menuconfig SCB2_MI0
+ bool "SCB2 Master Interface 0"
+ default n
+ depends on SCB_PRIORITY
+ help
+ The slave interface id of each slot should be set according following table.
+ RSI -- 0
+ SDU DMA -- 1
+ SDU -- 2
+ EMAC0 -- 3
+ EMAC1 -- 4
+
+if SCB2_MI0
+
+config SCB2_MI0_SLOT0
+ int "Slot 0 slave interface id"
+ default 0
+ range 0 4
+
+config SCB2_MI0_SLOT1
+ int "Slot 1 slave interface id"
+ default 1
+ range 0 4
+
+config SCB2_MI0_SLOT2
+ int "Slot 2 slave interface id"
+ default 2
+ range 0 4
+
+config SCB2_MI0_SLOT3
+ int "Slot 3 slave interface id"
+ default 3
+ range 0 4
+
+config SCB2_MI0_SLOT4
+ int "Slot 4 slave interface id"
+ default 4
+ range 0 4
+
+config SCB2_MI0_SLOT5
+ int "Slot 5 slave interface id"
+ default 0
+ range 0 4
+
+config SCB2_MI0_SLOT6
+ int "Slot 6 slave interface id"
+ default 1
+ range 0 4
+
+config SCB2_MI0_SLOT7
+ int "Slot 7 slave interface id"
+ default 2
+ range 0 4
+
+config SCB2_MI0_SLOT8
+ int "Slot 8 slave interface id"
+ default 3
+ range 0 4
+
+config SCB2_MI0_SLOT9
+ int "Slot 9 slave interface id"
+ default 4
+ range 0 4
+
+endif # SCB2_MI0
+
+menuconfig SCB3_MI0
+ bool "SCB3 Master Interface 0"
+ default n
+ depends on SCB_PRIORITY
+ help
+ The slave interface id of each slot should be set according following table.
+ LP0 -- 0
+ LP1 -- 1
+ LP2 -- 2
+ LP3 -- 3
+ UART0TX -- 4
+ UART0RX -- 5
+ UART1TX -- 4
+ UART1RX -- 5
+
+if SCB3_MI0
+
+config SCB3_MI0_SLOT0
+ int "Slot 0 slave interface id"
+ default 0
+ range 0 7
+
+config SCB3_MI0_SLOT1
+ int "Slot 1 slave interface id"
+ default 1
+ range 0 7
+
+config SCB3_MI0_SLOT2
+ int "Slot 2 slave interface id"
+ default 2
+ range 0 7
+
+config SCB3_MI0_SLOT3
+ int "Slot 3 slave interface id"
+ default 3
+ range 0 7
+
+config SCB3_MI0_SLOT4
+ int "Slot 4 slave interface id"
+ default 4
+ range 0 7
+
+config SCB3_MI0_SLOT5
+ int "Slot 5 slave interface id"
+ default 5
+ range 0 7
+
+config SCB3_MI0_SLOT6
+ int "Slot 6 slave interface id"
+ default 6
+ range 0 7
+
+config SCB3_MI0_SLOT7
+ int "Slot 7 slave interface id"
+ default 7
+ range 0 7
+
+config SCB3_MI0_SLOT8
+ int "Slot 8 slave interface id"
+ default 0
+ range 0 7
+
+config SCB3_MI0_SLOT9
+ int "Slot 9 slave interface id"
+ default 1
+ range 0 7
+
+config SCB3_MI0_SLOT10
+ int "Slot 10 slave interface id"
+ default 2
+ range 0 7
+
+config SCB3_MI0_SLOT11
+ int "Slot 11 slave interface id"
+ default 3
+ range 0 7
+
+config SCB3_MI0_SLOT12
+ int "Slot 12 slave interface id"
+ default 4
+ range 0 7
+
+config SCB3_MI0_SLOT13
+ int "Slot 13 slave interface id"
+ default 5
+ range 0 7
+
+config SCB3_MI0_SLOT14
+ int "Slot 14 slave interface id"
+ default 6
+ range 0 7
+
+config SCB3_MI0_SLOT15
+ int "Slot 15 slave interface id"
+ default 7
+ range 0 7
+
+endif # SCB3_MI0
+
+menuconfig SCB4_MI0
+ bool "SCB4 Master Interface 0"
+ default n
+ depends on SCB_PRIORITY
+ help
+ The slave interface id of each slot should be set according following table.
+ MDA21 -- 0
+ MDA22 -- 1
+ MDA23 -- 2
+ MDA24 -- 3
+ MDA25 -- 4
+ MDA26 -- 5
+ MDA27 -- 6
+ MDA28 -- 7
+
+if SCB4_MI0
+
+config SCB4_MI0_SLOT0
+ int "Slot 0 slave interface id"
+ default 0
+ range 0 7
+
+config SCB4_MI0_SLOT1
+ int "Slot 1 slave interface id"
+ default 1
+ range 0 7
+
+config SCB4_MI0_SLOT2
+ int "Slot 2 slave interface id"
+ default 2
+ range 0 7
+
+config SCB4_MI0_SLOT3
+ int "Slot 3 slave interface id"
+ default 3
+ range 0 7
+
+config SCB4_MI0_SLOT4
+ int "Slot 4 slave interface id"
+ default 4
+ range 0 7
+
+config SCB4_MI0_SLOT5
+ int "Slot 5 slave interface id"
+ default 5
+ range 0 7
+
+config SCB4_MI0_SLOT6
+ int "Slot 6 slave interface id"
+ default 6
+ range 0 7
+
+config SCB4_MI0_SLOT7
+ int "Slot 7 slave interface id"
+ default 7
+ range 0 7
+
+config SCB4_MI0_SLOT8
+ int "Slot 8 slave interface id"
+ default 0
+ range 0 7
+
+config SCB4_MI0_SLOT9
+ int "Slot 9 slave interface id"
+ default 1
+ range 0 7
+
+config SCB4_MI0_SLOT10
+ int "Slot 10 slave interface id"
+ default 2
+ range 0 7
+
+config SCB4_MI0_SLOT11
+ int "Slot 11 slave interface id"
+ default 3
+ range 0 7
+
+config SCB4_MI0_SLOT12
+ int "Slot 12 slave interface id"
+ default 4
+ range 0 7
+
+config SCB4_MI0_SLOT13
+ int "Slot 13 slave interface id"
+ default 5
+ range 0 7
+
+config SCB4_MI0_SLOT14
+ int "Slot 14 slave interface id"
+ default 6
+ range 0 7
+
+config SCB4_MI0_SLOT15
+ int "Slot 15 slave interface id"
+ default 7
+ range 0 7
+
+endif # SCB4_MI0
+
+menuconfig SCB5_MI0
+ bool "SCB5 Master Interface 0"
+ default n
+ depends on SCB_PRIORITY
+ help
+ The slave interface id of each slot should be set according following table.
+ PPI0 MDA29 -- 0
+ PPI0 MDA30 -- 1
+ PPI2 MDA31 -- 2
+ PPI2 MDA32 -- 3
+
+if SCB5_MI0
+
+config SCB5_MI0_SLOT0
+ int "Slot 0 slave interface id"
+ default 0
+ range 0 3
+
+config SCB5_MI0_SLOT1
+ int "Slot 1 slave interface id"
+ default 1
+ range 0 3
+
+config SCB5_MI0_SLOT2
+ int "Slot 2 slave interface id"
+ default 2
+ range 0 3
+
+config SCB5_MI0_SLOT3
+ int "Slot 3 slave interface id"
+ default 3
+ range 0 3
+
+config SCB5_MI0_SLOT4
+ int "Slot 4 slave interface id"
+ default 0
+ range 0 3
+
+config SCB5_MI0_SLOT5
+ int "Slot 5 slave interface id"
+ default 1
+ range 0 3
+
+config SCB5_MI0_SLOT6
+ int "Slot 6 slave interface id"
+ default 2
+ range 0 3
+
+config SCB5_MI0_SLOT7
+ int "Slot 7 slave interface id"
+ default 3
+ range 0 3
+
+endif # SCB5_MI0
+
+menuconfig SCB6_MI0
+ bool "SCB6 Master Interface 0"
+ default n
+ depends on SCB_PRIORITY
+ help
+ The slave interface id of each slot should be set according following table.
+ PPI1 MDA33 -- 0
+ PPI1 MDA34 -- 1
+
+if SCB6_MI0
+
+config SCB6_MI0_SLOT0
+ int "Slot 0 slave interface id"
+ default 0
+ range 0 1
+
+config SCB6_MI0_SLOT1
+ int "Slot 1 slave interface id"
+ default 1
+ range 0 1
+
+config SCB6_MI0_SLOT2
+ int "Slot 2 slave interface id"
+ default 0
+ range 0 1
+
+config SCB6_MI0_SLOT3
+ int "Slot 3 slave interface id"
+ default 1
+ range 0 1
+
+endif # SCB6_MI0
+
+menuconfig SCB7_MI0
+ bool "SCB7 Master Interface 0"
+ default n
+ depends on SCB_PRIORITY
+ help
+ The slave interface id of each slot should be set according following table.
+ PIXC0 -- 0
+ PIXC1 -- 1
+ PIXC2 -- 2
+
+if SCB7_MI0
+
+config SCB7_MI0_SLOT0
+ int "Slot 0 slave interface id"
+ default 0
+ range 0 2
+
+config SCB7_MI0_SLOT1
+ int "Slot 1 slave interface id"
+ default 1
+ range 0 2
+
+config SCB7_MI0_SLOT2
+ int "Slot 2 slave interface id"
+ default 2
+ range 0 2
+
+config SCB7_MI0_SLOT3
+ int "Slot 3 slave interface id"
+ default 0
+ range 0 2
+
+config SCB7_MI0_SLOT4
+ int "Slot 4 slave interface id"
+ default 1
+ range 0 2
+
+config SCB7_MI0_SLOT5
+ int "Slot 5 slave interface id"
+ default 2
+ range 0 2
+
+endif # SCB7_MI0
+
+menuconfig SCB8_MI0
+ bool "SCB8 Master Interface 0"
+ default n
+ depends on SCB_PRIORITY
+ help
+ The slave interface id of each slot should be set according following table.
+ PVP CPDOB -- 0
+ PVP CPDOC -- 1
+ PVP CPCO -- 2
+ PVP CPCI -- 3
+
+if SCB8_MI0
+
+config SCB8_MI0_SLOT0
+ int "Slot 0 slave interface id"
+ default 0
+ range 0 3
+
+config SCB8_MI0_SLOT1
+ int "Slot 1 slave interface id"
+ default 1
+ range 0 3
+
+config SCB8_MI0_SLOT2
+ int "Slot 2 slave interface id"
+ default 2
+ range 0 3
+
+config SCB8_MI0_SLOT3
+ int "Slot 3 slave interface id"
+ default 3
+ range 0 3
+
+config SCB8_MI0_SLOT4
+ int "Slot 4 slave interface id"
+ default 0
+ range 0 3
+
+config SCB8_MI0_SLOT5
+ int "Slot 5 slave interface id"
+ default 1
+ range 0 3
+
+config SCB8_MI0_SLOT6
+ int "Slot 6 slave interface id"
+ default 2
+ range 0 3
+
+config SCB8_MI0_SLOT7
+ int "Slot 7 slave interface id"
+ default 3
+ range 0 3
+
+endif # SCB8_MI0
+
+menuconfig SCB9_MI0
+ bool "SCB9 Master Interface 0"
+ default n
+ depends on SCB_PRIORITY
+ help
+ The slave interface id of each slot should be set according following table.
+ PVP MPDO -- 0
+ PVP MPDI -- 1
+ PVP MPCO -- 2
+ PVP MPCI -- 3
+ PVP CPDOA -- 4
+
+if SCB9_MI0
+
+config SCB9_MI0_SLOT0
+ int "Slot 0 slave interface id"
+ default 0
+ range 0 4
+
+config SCB9_MI0_SLOT1
+ int "Slot 1 slave interface id"
+ default 1
+ range 0 4
+
+config SCB9_MI0_SLOT2
+ int "Slot 2 slave interface id"
+ default 2
+ range 0 4
+
+config SCB9_MI0_SLOT3
+ int "Slot 3 slave interface id"
+ default 3
+ range 0 4
+
+config SCB9_MI0_SLOT4
+ int "Slot 4 slave interface id"
+ default 4
+ range 0 4
+
+config SCB9_MI0_SLOT5
+ int "Slot 5 slave interface id"
+ default 0
+ range 0 4
+
+config SCB9_MI0_SLOT6
+ int "Slot 6 slave interface id"
+ default 1
+ range 0 4
+
+config SCB9_MI0_SLOT7
+ int "Slot 7 slave interface id"
+ default 2
+ range 0 4
+
+config SCB9_MI0_SLOT8
+ int "Slot 8 slave interface id"
+ default 3
+ range 0 4
+
+config SCB9_MI0_SLOT9
+ int "Slot 9 slave interface id"
+ default 4
+ range 0 4
+
+endif # SCB9_MI0
endmenu
diff --git a/arch/blackfin/mach-bf609/Makefile b/arch/blackfin/mach-bf609/Makefile
index 2a27f817454..60ffaf85d30 100644
--- a/arch/blackfin/mach-bf609/Makefile
+++ b/arch/blackfin/mach-bf609/Makefile
@@ -2,5 +2,6 @@
# arch/blackfin/mach-bf609/Makefile
#
-obj-y := dma.o clock.o
-obj-$(CONFIG_PM) += pm.o hibernate.o
+obj-y := dma.o clock.o ints-priority.o
+obj-$(CONFIG_PM) += pm.o dpm.o
+obj-$(CONFIG_SCB_PRIORITY) += scb.o
diff --git a/arch/blackfin/mach-bf609/boards/ezkit.c b/arch/blackfin/mach-bf609/boards/ezkit.c
index ac64f47217c..e2c0b024ce8 100644
--- a/arch/blackfin/mach-bf609/boards/ezkit.c
+++ b/arch/blackfin/mach-bf609/boards/ezkit.c
@@ -17,7 +17,10 @@
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/usb/musb.h>
-#include <asm/bfin6xx_spi.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/platform_data/pinctrl-adi2.h>
+#include <linux/spi/adi_spi3.h>
#include <asm/dma.h>
#include <asm/gpio.h>
#include <asm/nand.h>
@@ -36,7 +39,7 @@ const char bfin_board_name[] = "ADI BF609-EZKIT";
* Driver needs to know address, irq and flag pin.
*/
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
#include <linux/usb/isp1760.h>
static struct resource bfin_isp1760_resources[] = {
[0] = {
@@ -71,7 +74,7 @@ static struct platform_device bfin_isp1760_device = {
};
#endif
-#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
#include <asm/bfin_rotary.h>
static struct bfin_rotary_platform_data bfin_rotary_data = {
@@ -102,21 +105,34 @@ static struct platform_device bfin_rotary_device = {
};
#endif
-#if defined(CONFIG_STMMAC_ETH) || defined(CONFIG_STMMAC_ETH_MODULE)
+#if IS_ENABLED(CONFIG_STMMAC_ETH)
#include <linux/stmmac.h>
-
-static unsigned short pins[] = P_RMII0;
+#include <linux/phy.h>
static struct stmmac_mdio_bus_data phy_private_data = {
- .bus_id = 0,
.phy_mask = 1,
};
+static struct stmmac_dma_cfg eth_dma_cfg = {
+ .pbl = 2,
+};
+
+int stmmac_ptp_clk_init(struct platform_device *pdev, void *priv)
+{
+ bfin_write32(PADS0_EMAC_PTP_CLKSEL, 0);
+ return 0;
+}
+
static struct plat_stmmacenet_data eth_private_data = {
+ .has_gmac = 1,
.bus_id = 0,
.enh_desc = 1,
.phy_addr = 1,
.mdio_bus_data = &phy_private_data,
+ .dma_cfg = &eth_dma_cfg,
+ .force_thresh_dma_mode = 1,
+ .interface = PHY_INTERFACE_MODE_RMII,
+ .init = stmmac_ptp_clk_init,
};
static struct platform_device bfin_eth_device = {
@@ -143,7 +159,7 @@ static struct platform_device bfin_eth_device = {
};
#endif
-#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_ADXL34X)
#include <linux/input/adxl34x.h>
static const struct adxl34x_platform_data adxl34x_info = {
.x_axis_offset = 0,
@@ -182,14 +198,14 @@ static const struct adxl34x_platform_data adxl34x_info = {
};
#endif
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
@@ -197,6 +213,18 @@ static struct resource bfin_uart0_resources[] = {
.end = UART0_RXDIV+4,
.flags = IORESOURCE_MEM,
},
+#ifdef CONFIG_EARLY_PRINTK
+ {
+ .start = PORTD_FER,
+ .end = PORTD_FER+2,
+ .flags = IORESOURCE_REG,
+ },
+ {
+ .start = PORTD_MUX,
+ .end = PORTD_MUX+3,
+ .flags = IORESOURCE_REG,
+ },
+#endif
{
.start = IRQ_UART0_TX,
.end = IRQ_UART0_TX,
@@ -261,6 +289,13 @@ static struct resource bfin_uart1_resources[] = {
.end = UART1_RXDIV+4,
.flags = IORESOURCE_MEM,
},
+#ifdef CONFIG_EARLY_PRINTK
+ {
+ .start = PORTG_FER_SET,
+ .end = PORTG_FER_SET+2,
+ .flags = IORESOURCE_REG,
+ },
+#endif
{
.start = IRQ_UART1_TX,
.end = IRQ_UART1_TX,
@@ -320,7 +355,7 @@ static struct platform_device bfin_uart1_device = {
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
@@ -373,7 +408,7 @@ static struct platform_device bfin_sir1_device = {
#endif
#endif
-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
static struct resource musb_resources[] = {
[0] = {
.start = 0xFFCC1000,
@@ -429,7 +464,7 @@ static struct platform_device musb_device = {
};
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
@@ -534,7 +569,7 @@ static struct platform_device bfin_sport2_uart_device = {
#endif
#endif
-#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_CAN_BFIN)
static unsigned short bfin_can0_peripherals[] = {
P_CAN0_RX, P_CAN0_TX, 0
@@ -575,7 +610,7 @@ static struct platform_device bfin_can0_device = {
#endif
-#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
static struct mtd_partition partition_info[] = {
{
.name = "bootloader(nand)",
@@ -625,7 +660,7 @@ static struct platform_device bfin_nand_device = {
};
#endif
-#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SDH_BFIN)
static struct bfin_sd_host bfin_sdh_data = {
.dma_chan = CH_RSI,
@@ -642,7 +677,7 @@ static struct platform_device bfin_sdh_device = {
};
#endif
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
static struct mtd_partition ezkit_partitions[] = {
{
.name = "bootloader(nor)",
@@ -659,16 +694,9 @@ static struct mtd_partition ezkit_partitions[] = {
},
};
-int bf609_nor_flash_init(struct platform_device *dev)
+int bf609_nor_flash_init(struct platform_device *pdev)
{
#define CONFIG_SMC_GCTL_VAL 0x00000010
- const unsigned short pins[] = {
- P_A3, P_A4, P_A5, P_A6, P_A7, P_A8, P_A9, P_A10, P_A11, P_A12,
- P_A13, P_A14, P_A15, P_A16, P_A17, P_A18, P_A19, P_A20, P_A21,
- P_A22, P_A23, P_A24, P_A25, P_NORCK, 0,
- };
-
- peripheral_request_list(pins, "smc0");
bfin_write32(SMC_GCTL, CONFIG_SMC_GCTL_VAL);
bfin_write32(SMC_B0CTL, 0x01002011);
@@ -677,11 +705,20 @@ int bf609_nor_flash_init(struct platform_device *dev)
return 0;
}
+void bf609_nor_flash_exit(struct platform_device *pdev)
+{
+ bfin_write32(SMC_GCTL, 0);
+}
+
static struct physmap_flash_data ezkit_flash_data = {
.width = 2,
.parts = ezkit_partitions,
- .init = bf609_nor_flash_init,
+ .init = bf609_nor_flash_init,
+ .exit = bf609_nor_flash_exit,
.nr_parts = ARRAY_SIZE(ezkit_partitions),
+#ifdef CONFIG_ROMKERNEL
+ .probe_type = "map_rom",
+#endif
};
static struct resource ezkit_flash_resource = {
@@ -701,8 +738,7 @@ static struct platform_device ezkit_flash_device = {
};
#endif
-#if defined(CONFIG_MTD_M25P80) \
- || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
/* SPI flash chip (w25q32) */
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
@@ -728,26 +764,25 @@ static struct flash_platform_data bfin_spi_flash_data = {
.type = "w25q32",
};
-static struct bfin6xx_spi_chip spi_flash_chip_info = {
+static struct adi_spi3_chip spi_flash_chip_info = {
.enable_dma = true, /* use dma transfer with this chip*/
};
#endif
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
-static struct bfin6xx_spi_chip spidev_chip_info = {
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
+static struct adi_spi3_chip spidev_chip_info = {
.enable_dma = true,
};
#endif
-#if defined(CONFIG_SND_BF6XX_I2S) || defined(CONFIG_SND_BF6XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
static struct platform_device bfin_i2s_pcm = {
.name = "bfin-i2s-pcm-audio",
.id = -1,
};
#endif
-#if defined(CONFIG_SND_BF6XX_SOC_I2S) || \
- defined(CONFIG_SND_BF6XX_SOC_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF6XX_SOC_I2S)
#include <asm/bfin_sport3.h>
static struct resource bfin_snd_resources[] = {
{
@@ -801,14 +836,27 @@ static struct platform_device bfin_i2s = {
};
#endif
-#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61) || \
- defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
+static const char * const ad1836_link[] = {
+ "bfin-i2s.0",
+ "spi0.76",
+};
+static struct platform_device bfin_ad1836_machine = {
+ .name = "bfin-snd-ad1836",
+ .id = -1,
+ .dev = {
+ .platform_data = (void *)ad1836_link,
+ },
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61)
static struct platform_device adau1761_device = {
.name = "bfin-eval-adau1x61",
};
#endif
-#if defined(CONFIG_SND_SOC_ADAU1761) || defined(CONFIG_SND_SOC_ADAU1761_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_ADAU1761)
#include <sound/adau17x1.h>
static struct adau1761_platform_data adau1761_info = {
.lineout_mode = ADAU1761_OUTPUT_MODE_LINE,
@@ -816,8 +864,7 @@ static struct adau1761_platform_data adau1761_info = {
};
#endif
-#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
- || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
#include <linux/videodev2.h>
#include <media/blackfin/bfin_capture.h>
#include <media/blackfin/ppi.h>
@@ -825,6 +872,12 @@ static struct adau1761_platform_data adau1761_info = {
static const unsigned short ppi_req[] = {
P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
+ P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11,
+ P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15,
+#if !IS_ENABLED(CONFIG_VIDEO_VS6624)
+ P_PPI0_D16, P_PPI0_D17, P_PPI0_D18, P_PPI0_D19,
+ P_PPI0_D20, P_PPI0_D21, P_PPI0_D22, P_PPI0_D23,
+#endif
P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
0,
};
@@ -837,8 +890,7 @@ static const struct ppi_info ppi_info = {
.pin_req = ppi_req,
};
-#if defined(CONFIG_VIDEO_VS6624) \
- || defined(CONFIG_VIDEO_VS6624_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_VS6624)
static struct v4l2_input vs6624_inputs[] = {
{
.index = 0,
@@ -855,7 +907,7 @@ static struct bcap_route vs6624_routes[] = {
},
};
-static const unsigned vs6624_ce_pin = GPIO_PD1;
+static const unsigned vs6624_ce_pin = GPIO_PE4;
static struct bfin_capture_config bfin_capture_data = {
.card_name = "BF609",
@@ -871,7 +923,129 @@ static struct bfin_capture_config bfin_capture_data = {
.ppi_info = &ppi_info,
.ppi_control = (PACK_EN | DLEN_8 | EPPI_CTL_FS1HI_FS2HI
| EPPI_CTL_POLC3 | EPPI_CTL_SYNC2 | EPPI_CTL_NON656),
- .blank_clocks = 8,
+ .blank_pixels = 4,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_VIDEO_ADV7842)
+#include <media/adv7842.h>
+
+static struct v4l2_input adv7842_inputs[] = {
+ {
+ .index = 0,
+ .name = "Composite",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .std = V4L2_STD_ALL,
+ .capabilities = V4L2_IN_CAP_STD,
+ },
+ {
+ .index = 1,
+ .name = "S-Video",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .std = V4L2_STD_ALL,
+ .capabilities = V4L2_IN_CAP_STD,
+ },
+ {
+ .index = 2,
+ .name = "Component",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .capabilities = V4L2_IN_CAP_DV_TIMINGS,
+ },
+ {
+ .index = 3,
+ .name = "VGA",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .capabilities = V4L2_IN_CAP_DV_TIMINGS,
+ },
+ {
+ .index = 4,
+ .name = "HDMI",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .capabilities = V4L2_IN_CAP_DV_TIMINGS,
+ },
+};
+
+static struct bcap_route adv7842_routes[] = {
+ {
+ .input = 3,
+ .output = 0,
+ .ppi_control = (PACK_EN | DLEN_8 | EPPI_CTL_FLDSEL
+ | EPPI_CTL_ACTIVE656),
+ },
+ {
+ .input = 4,
+ .output = 0,
+ },
+ {
+ .input = 2,
+ .output = 0,
+ },
+ {
+ .input = 1,
+ .output = 0,
+ },
+ {
+ .input = 0,
+ .output = 1,
+ .ppi_control = (EPPI_CTL_SPLTWRD | PACK_EN | DLEN_16
+ | EPPI_CTL_FS1LO_FS2LO | EPPI_CTL_POLC2
+ | EPPI_CTL_SYNC2 | EPPI_CTL_NON656),
+ },
+};
+
+static struct adv7842_output_format adv7842_opf[] = {
+ {
+ .op_ch_sel = ADV7842_OP_CH_SEL_BRG,
+ .op_format_sel = ADV7842_OP_FORMAT_SEL_SDR_ITU656_8,
+ .op_656_range = 1,
+ .blank_data = 1,
+ .insert_av_codes = 1,
+ },
+ {
+ .op_ch_sel = ADV7842_OP_CH_SEL_RGB,
+ .op_format_sel = ADV7842_OP_FORMAT_SEL_SDR_ITU656_16,
+ .op_656_range = 1,
+ .blank_data = 1,
+ },
+};
+
+static struct adv7842_platform_data adv7842_data = {
+ .opf = adv7842_opf,
+ .num_opf = ARRAY_SIZE(adv7842_opf),
+ .ain_sel = ADV7842_AIN10_11_12_NC_SYNC_4_1,
+ .prim_mode = ADV7842_PRIM_MODE_SDP,
+ .vid_std_select = ADV7842_SDP_VID_STD_CVBS_SD_4x1,
+ .hdmi_free_run_enable = 1,
+ .sdp_free_run_auto = 1,
+ .llc_dll_phase = 0x10,
+ .i2c_sdp_io = 0x40,
+ .i2c_sdp = 0x41,
+ .i2c_cp = 0x42,
+ .i2c_vdp = 0x43,
+ .i2c_afe = 0x44,
+ .i2c_hdmi = 0x45,
+ .i2c_repeater = 0x46,
+ .i2c_edid = 0x47,
+ .i2c_infoframe = 0x48,
+ .i2c_cec = 0x49,
+ .i2c_avlink = 0x4a,
+ .i2c_ex = 0x26,
+};
+
+static struct bfin_capture_config bfin_capture_data = {
+ .card_name = "BF609",
+ .inputs = adv7842_inputs,
+ .num_inputs = ARRAY_SIZE(adv7842_inputs),
+ .routes = adv7842_routes,
+ .i2c_adapter_id = 0,
+ .board_info = {
+ .type = "adv7842",
+ .addr = 0x20,
+ .platform_data = (void *)&adv7842_data,
+ },
+ .ppi_info = &ppi_info,
+ .ppi_control = (PACK_EN | DLEN_8 | EPPI_CTL_FLDSEL
+ | EPPI_CTL_ACTIVE656),
};
#endif
@@ -883,6 +1057,153 @@ static struct platform_device bfin_capture_device = {
};
#endif
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_DISPLAY)
+#include <linux/videodev2.h>
+#include <media/blackfin/bfin_display.h>
+#include <media/blackfin/ppi.h>
+
+static const unsigned short ppi_req_disp[] = {
+ P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
+ P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
+ P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11,
+ P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15,
+ P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
+ 0,
+};
+
+static const struct ppi_info ppi_info = {
+ .type = PPI_TYPE_EPPI3,
+ .dma_ch = CH_EPPI0_CH0,
+ .irq_err = IRQ_EPPI0_STAT,
+ .base = (void __iomem *)EPPI0_STAT,
+ .pin_req = ppi_req_disp,
+};
+
+#if IS_ENABLED(CONFIG_VIDEO_ADV7511)
+#include <media/adv7511.h>
+
+static struct v4l2_output adv7511_outputs[] = {
+ {
+ .index = 0,
+ .name = "HDMI",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .capabilities = V4L2_OUT_CAP_DV_TIMINGS,
+ },
+};
+
+static struct disp_route adv7511_routes[] = {
+ {
+ .output = 0,
+ },
+};
+
+static struct adv7511_platform_data adv7511_data = {
+ .edid_addr = 0x7e,
+ .i2c_ex = 0x25,
+};
+
+static struct bfin_display_config bfin_display_data = {
+ .card_name = "BF609",
+ .outputs = adv7511_outputs,
+ .num_outputs = ARRAY_SIZE(adv7511_outputs),
+ .routes = adv7511_routes,
+ .i2c_adapter_id = 0,
+ .board_info = {
+ .type = "adv7511",
+ .addr = 0x39,
+ .platform_data = (void *)&adv7511_data,
+ },
+ .ppi_info = &ppi_info,
+ .ppi_control = (EPPI_CTL_SPLTWRD | PACK_EN | DLEN_16
+ | EPPI_CTL_FS1LO_FS2LO | EPPI_CTL_POLC3
+ | EPPI_CTL_IFSGEN | EPPI_CTL_SYNC2
+ | EPPI_CTL_NON656 | EPPI_CTL_DIR),
+};
+#endif
+
+#if IS_ENABLED(CONFIG_VIDEO_ADV7343)
+#include <media/adv7343.h>
+
+static struct v4l2_output adv7343_outputs[] = {
+ {
+ .index = 0,
+ .name = "Composite",
+ .type = V4L2_OUTPUT_TYPE_ANALOG,
+ .std = V4L2_STD_ALL,
+ .capabilities = V4L2_OUT_CAP_STD,
+ },
+ {
+ .index = 1,
+ .name = "S-Video",
+ .type = V4L2_OUTPUT_TYPE_ANALOG,
+ .std = V4L2_STD_ALL,
+ .capabilities = V4L2_OUT_CAP_STD,
+ },
+ {
+ .index = 2,
+ .name = "Component",
+ .type = V4L2_OUTPUT_TYPE_ANALOG,
+ .std = V4L2_STD_ALL,
+ .capabilities = V4L2_OUT_CAP_STD,
+ },
+
+};
+
+static struct disp_route adv7343_routes[] = {
+ {
+ .output = ADV7343_COMPOSITE_ID,
+ },
+ {
+ .output = ADV7343_SVIDEO_ID,
+ },
+ {
+ .output = ADV7343_COMPONENT_ID,
+ },
+};
+
+static struct adv7343_platform_data adv7343_data = {
+ .mode_config = {
+ .sleep_mode = false,
+ .pll_control = false,
+ .dac_1 = true,
+ .dac_2 = true,
+ .dac_3 = true,
+ .dac_4 = true,
+ .dac_5 = true,
+ .dac_6 = true,
+ },
+ .sd_config = {
+ .sd_dac_out1 = false,
+ .sd_dac_out2 = false,
+ },
+};
+
+static struct bfin_display_config bfin_display_data = {
+ .card_name = "BF609",
+ .outputs = adv7343_outputs,
+ .num_outputs = ARRAY_SIZE(adv7343_outputs),
+ .routes = adv7343_routes,
+ .i2c_adapter_id = 0,
+ .board_info = {
+ .type = "adv7343",
+ .addr = 0x2b,
+ .platform_data = (void *)&adv7343_data,
+ },
+ .ppi_info = &ppi_info_disp,
+ .ppi_control = (PACK_EN | DLEN_8 | EPPI_CTL_FS1LO_FS2LO
+ | EPPI_CTL_POLC3 | EPPI_CTL_BLANKGEN | EPPI_CTL_SYNC2
+ | EPPI_CTL_NON656 | EPPI_CTL_DIR),
+};
+#endif
+
+static struct platform_device bfin_display_device = {
+ .name = "bfin_display",
+ .dev = {
+ .platform_data = &bfin_display_data,
+ },
+};
+#endif
+
#if defined(CONFIG_BFIN_CRC)
#define BFIN_CRC_NAME "bfin-crc"
@@ -947,7 +1268,40 @@ static struct platform_device bfin_crc1_device = {
};
#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if defined(CONFIG_CRYPTO_DEV_BFIN_CRC)
+#define BFIN_CRYPTO_CRC_NAME "bfin-hmac-crc"
+#define BFIN_CRYPTO_CRC_POLY_DATA 0x5c5c5c5c
+
+static struct resource bfin_crypto_crc_resources[] = {
+ {
+ .start = REG_CRC0_CTL,
+ .end = REG_CRC0_REVID+4,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_CRC0_DCNTEXP,
+ .end = IRQ_CRC0_DCNTEXP,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = CH_MEM_STREAM0_SRC_CRC0,
+ .end = CH_MEM_STREAM0_SRC_CRC0,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct platform_device bfin_crypto_crc_device = {
+ .name = BFIN_CRYPTO_CRC_NAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bfin_crypto_crc_resources),
+ .resource = bfin_crypto_crc_resources,
+ .dev = {
+ .platform_data = (void *)BFIN_CRYPTO_CRC_POLY_DATA,
+ },
+};
+#endif
+
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
static const struct ad7877_platform_data bfin_ad7877_ts_info = {
.model = 7877,
.vref_delay_usecs = 50, /* internal, no capacitor */
@@ -963,40 +1317,411 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = {
};
#endif
+#ifdef CONFIG_PINCTRL_ADI2
+
+# define ADI_PINT_DEVNAME "adi-gpio-pint"
+# define ADI_GPIO_DEVNAME "adi-gpio"
+# define ADI_PINCTRL_DEVNAME "pinctrl-adi2"
+
+static struct platform_device bfin_pinctrl_device = {
+ .name = ADI_PINCTRL_DEVNAME,
+ .id = 0,
+};
+
+static struct resource bfin_pint0_resources[] = {
+ {
+ .start = PINT0_MASK_SET,
+ .end = PINT0_LATCH + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_PINT0,
+ .end = IRQ_PINT0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_pint0_device = {
+ .name = ADI_PINT_DEVNAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bfin_pint0_resources),
+ .resource = bfin_pint0_resources,
+};
+
+static struct resource bfin_pint1_resources[] = {
+ {
+ .start = PINT1_MASK_SET,
+ .end = PINT1_LATCH + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_PINT1,
+ .end = IRQ_PINT1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_pint1_device = {
+ .name = ADI_PINT_DEVNAME,
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_pint1_resources),
+ .resource = bfin_pint1_resources,
+};
+
+static struct resource bfin_pint2_resources[] = {
+ {
+ .start = PINT2_MASK_SET,
+ .end = PINT2_LATCH + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_PINT2,
+ .end = IRQ_PINT2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_pint2_device = {
+ .name = ADI_PINT_DEVNAME,
+ .id = 2,
+ .num_resources = ARRAY_SIZE(bfin_pint2_resources),
+ .resource = bfin_pint2_resources,
+};
+
+static struct resource bfin_pint3_resources[] = {
+ {
+ .start = PINT3_MASK_SET,
+ .end = PINT3_LATCH + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_PINT3,
+ .end = IRQ_PINT3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_pint3_device = {
+ .name = ADI_PINT_DEVNAME,
+ .id = 3,
+ .num_resources = ARRAY_SIZE(bfin_pint3_resources),
+ .resource = bfin_pint3_resources,
+};
+
+static struct resource bfin_pint4_resources[] = {
+ {
+ .start = PINT4_MASK_SET,
+ .end = PINT4_LATCH + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_PINT4,
+ .end = IRQ_PINT4,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_pint4_device = {
+ .name = ADI_PINT_DEVNAME,
+ .id = 4,
+ .num_resources = ARRAY_SIZE(bfin_pint4_resources),
+ .resource = bfin_pint4_resources,
+};
+
+static struct resource bfin_pint5_resources[] = {
+ {
+ .start = PINT5_MASK_SET,
+ .end = PINT5_LATCH + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_PINT5,
+ .end = IRQ_PINT5,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_pint5_device = {
+ .name = ADI_PINT_DEVNAME,
+ .id = 5,
+ .num_resources = ARRAY_SIZE(bfin_pint5_resources),
+ .resource = bfin_pint5_resources,
+};
+
+static struct resource bfin_gpa_resources[] = {
+ {
+ .start = PORTA_FER,
+ .end = PORTA_MUX + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ { /* optional */
+ .start = IRQ_PA0,
+ .end = IRQ_PA0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct adi_pinctrl_gpio_platform_data bfin_gpa_pdata = {
+ .port_pin_base = GPIO_PA0,
+ .port_width = GPIO_BANKSIZE,
+ .pint_id = 0, /* PINT0 */
+ .pint_assign = true, /* PINT upper 16 bit */
+ .pint_map = 0, /* mapping mask in PINT */
+};
+
+static struct platform_device bfin_gpa_device = {
+ .name = ADI_GPIO_DEVNAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bfin_gpa_resources),
+ .resource = bfin_gpa_resources,
+ .dev = {
+ .platform_data = &bfin_gpa_pdata, /* Passed to driver */
+ },
+};
+
+static struct resource bfin_gpb_resources[] = {
+ {
+ .start = PORTB_FER,
+ .end = PORTB_MUX + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_PB0,
+ .end = IRQ_PB0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct adi_pinctrl_gpio_platform_data bfin_gpb_pdata = {
+ .port_pin_base = GPIO_PB0,
+ .port_width = GPIO_BANKSIZE,
+ .pint_id = 0,
+ .pint_assign = false,
+ .pint_map = 1,
+};
+
+static struct platform_device bfin_gpb_device = {
+ .name = ADI_GPIO_DEVNAME,
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_gpb_resources),
+ .resource = bfin_gpb_resources,
+ .dev = {
+ .platform_data = &bfin_gpb_pdata, /* Passed to driver */
+ },
+};
+
+static struct resource bfin_gpc_resources[] = {
+ {
+ .start = PORTC_FER,
+ .end = PORTC_MUX + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_PC0,
+ .end = IRQ_PC0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct adi_pinctrl_gpio_platform_data bfin_gpc_pdata = {
+ .port_pin_base = GPIO_PC0,
+ .port_width = GPIO_BANKSIZE,
+ .pint_id = 1,
+ .pint_assign = false,
+ .pint_map = 1,
+};
+
+static struct platform_device bfin_gpc_device = {
+ .name = ADI_GPIO_DEVNAME,
+ .id = 2,
+ .num_resources = ARRAY_SIZE(bfin_gpc_resources),
+ .resource = bfin_gpc_resources,
+ .dev = {
+ .platform_data = &bfin_gpc_pdata, /* Passed to driver */
+ },
+};
+
+static struct resource bfin_gpd_resources[] = {
+ {
+ .start = PORTD_FER,
+ .end = PORTD_MUX + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_PD0,
+ .end = IRQ_PD0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct adi_pinctrl_gpio_platform_data bfin_gpd_pdata = {
+ .port_pin_base = GPIO_PD0,
+ .port_width = GPIO_BANKSIZE,
+ .pint_id = 2,
+ .pint_assign = false,
+ .pint_map = 1,
+};
+
+static struct platform_device bfin_gpd_device = {
+ .name = ADI_GPIO_DEVNAME,
+ .id = 3,
+ .num_resources = ARRAY_SIZE(bfin_gpd_resources),
+ .resource = bfin_gpd_resources,
+ .dev = {
+ .platform_data = &bfin_gpd_pdata, /* Passed to driver */
+ },
+};
+
+static struct resource bfin_gpe_resources[] = {
+ {
+ .start = PORTE_FER,
+ .end = PORTE_MUX + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_PE0,
+ .end = IRQ_PE0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct adi_pinctrl_gpio_platform_data bfin_gpe_pdata = {
+ .port_pin_base = GPIO_PE0,
+ .port_width = GPIO_BANKSIZE,
+ .pint_id = 3,
+ .pint_assign = false,
+ .pint_map = 1,
+};
+
+static struct platform_device bfin_gpe_device = {
+ .name = ADI_GPIO_DEVNAME,
+ .id = 4,
+ .num_resources = ARRAY_SIZE(bfin_gpe_resources),
+ .resource = bfin_gpe_resources,
+ .dev = {
+ .platform_data = &bfin_gpe_pdata, /* Passed to driver */
+ },
+};
+
+static struct resource bfin_gpf_resources[] = {
+ {
+ .start = PORTF_FER,
+ .end = PORTF_MUX + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_PF0,
+ .end = IRQ_PF0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct adi_pinctrl_gpio_platform_data bfin_gpf_pdata = {
+ .port_pin_base = GPIO_PF0,
+ .port_width = GPIO_BANKSIZE,
+ .pint_id = 4,
+ .pint_assign = false,
+ .pint_map = 1,
+};
+
+static struct platform_device bfin_gpf_device = {
+ .name = ADI_GPIO_DEVNAME,
+ .id = 5,
+ .num_resources = ARRAY_SIZE(bfin_gpf_resources),
+ .resource = bfin_gpf_resources,
+ .dev = {
+ .platform_data = &bfin_gpf_pdata, /* Passed to driver */
+ },
+};
+
+static struct resource bfin_gpg_resources[] = {
+ {
+ .start = PORTG_FER,
+ .end = PORTG_MUX + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_PG0,
+ .end = IRQ_PG0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct adi_pinctrl_gpio_platform_data bfin_gpg_pdata = {
+ .port_pin_base = GPIO_PG0,
+ .port_width = GPIO_BANKSIZE,
+ .pint_id = 5,
+ .pint_assign = false,
+ .pint_map = 1,
+};
+
+static struct platform_device bfin_gpg_device = {
+ .name = ADI_GPIO_DEVNAME,
+ .id = 6,
+ .num_resources = ARRAY_SIZE(bfin_gpg_resources),
+ .resource = bfin_gpg_resources,
+ .dev = {
+ .platform_data = &bfin_gpg_pdata, /* Passed to driver */
+ },
+};
+
+#endif
+
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+ {BTN_0, GPIO_PB10, 1, "gpio-keys: BTN0"},
+ {BTN_1, GPIO_PE1, 1, "gpio-keys: BTN1"},
+};
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+ .buttons = bfin_gpio_keys_table,
+ .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+ .name = "gpio-keys",
+ .dev = {
+ .platform_data = &bfin_gpio_keys_data,
+ },
+};
+#endif
+
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) \
- || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0, /* Framework bus number */
- .chip_select = 1, /* SPI_SSEL1*/
+ .chip_select = MAX_CTRL_CS + GPIO_PD11, /* SPI_SSEL1*/
.platform_data = &bfin_spi_flash_data,
.controller_data = &spi_flash_chip_info,
.mode = SPI_MODE_3,
},
#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
{
.modalias = "ad7877",
.platform_data = &bfin_ad7877_ts_info,
- .irq = IRQ_PB4, /* old boards (<=Rev 1.3) use IRQ_PJ11 */
+ .irq = IRQ_PD9,
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = 2,
+ .chip_select = MAX_CTRL_CS + GPIO_PC15, /* SPI_SSEL4 */
},
#endif
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = 1,
+ .chip_select = MAX_CTRL_CS + GPIO_PD11, /* SPI_SSEL1*/
.controller_data = &spidev_chip_info,
},
#endif
-#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_ADXL34X_SPI)
{
.modalias = "adxl34x",
.platform_data = &adxl34x_info,
@@ -1008,7 +1733,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
};
-#if defined(CONFIG_SPI_BFIN6XX) || defined(CONFIG_SPI_BFIN6XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_ADI_V3)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
{
@@ -1049,13 +1774,13 @@ static struct resource bfin_spi1_resource[] = {
};
/* SPI controller data */
-static struct bfin6xx_spi_master bf60x_spi_master_info0 = {
- .num_chipselect = 4,
+static struct adi_spi3_master bf60x_spi_master_info0 = {
+ .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
};
static struct platform_device bf60x_spi_master0 = {
- .name = "bfin-spi",
+ .name = "adi-spi3",
.id = 0, /* Bus number */
.num_resources = ARRAY_SIZE(bfin_spi0_resource),
.resource = bfin_spi0_resource,
@@ -1064,13 +1789,13 @@ static struct platform_device bf60x_spi_master0 = {
},
};
-static struct bfin6xx_spi_master bf60x_spi_master_info1 = {
- .num_chipselect = 4,
+static struct adi_spi3_master bf60x_spi_master_info1 = {
+ .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
.pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
};
static struct platform_device bf60x_spi_master1 = {
- .name = "bfin-spi",
+ .name = "adi-spi3",
.id = 1, /* Bus number */
.num_resources = ARRAY_SIZE(bfin_spi1_resource),
.resource = bfin_spi1_resource,
@@ -1080,7 +1805,7 @@ static struct platform_device bf60x_spi_master1 = {
};
#endif /* spi master and devices */
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
static struct resource bfin_twi0_resource[] = {
@@ -1133,19 +1858,24 @@ static struct platform_device i2c_bfin_twi1_device = {
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
-#if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_ADXL34X_I2C)
{
I2C_BOARD_INFO("adxl34x", 0x53),
.irq = IRQ_PC5,
.platform_data = (void *)&adxl34x_info,
},
#endif
-#if defined(CONFIG_SND_SOC_ADAU1761) || defined(CONFIG_SND_SOC_ADAU1761_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_ADAU1761)
{
I2C_BOARD_INFO("adau1761", 0x38),
.platform_data = (void *)&adau1761_info
},
#endif
+#if IS_ENABLED(CONFIG_SND_SOC_SSM2602)
+ {
+ I2C_BOARD_INFO("ssm2602", 0x1b),
+ },
+#endif
};
static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
@@ -1182,12 +1912,28 @@ static struct platform_device bfin_dpmc = {
static struct platform_device *ezkit_devices[] __initdata = {
&bfin_dpmc,
-
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if defined(CONFIG_PINCTRL_ADI2)
+ &bfin_pinctrl_device,
+ &bfin_pint0_device,
+ &bfin_pint1_device,
+ &bfin_pint2_device,
+ &bfin_pint3_device,
+ &bfin_pint4_device,
+ &bfin_pint5_device,
+ &bfin_gpa_device,
+ &bfin_gpb_device,
+ &bfin_gpc_device,
+ &bfin_gpd_device,
+ &bfin_gpe_device,
+ &bfin_gpf_device,
+ &bfin_gpg_device,
+#endif
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
@@ -1196,7 +1942,7 @@ static struct platform_device *ezkit_devices[] __initdata = {
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
@@ -1205,19 +1951,19 @@ static struct platform_device *ezkit_devices[] __initdata = {
#endif
#endif
-#if defined(CONFIG_STMMAC_ETH) || defined(CONFIG_STMMAC_ETH_MODULE)
+#if IS_ENABLED(CONFIG_STMMAC_ETH)
&bfin_eth_device,
#endif
-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
&musb_device,
#endif
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
&bfin_isp1760_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
@@ -1229,28 +1975,28 @@ static struct platform_device *ezkit_devices[] __initdata = {
#endif
#endif
-#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_CAN_BFIN)
&bfin_can0_device,
#endif
-#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
&bfin_nand_device,
#endif
-#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SDH_BFIN)
&bfin_sdh_device,
#endif
-#if defined(CONFIG_SPI_BFIN6XX) || defined(CONFIG_SPI_BFIN6XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_ADI_V3)
&bf60x_spi_master0,
&bf60x_spi_master1,
#endif
-#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
&bfin_rotary_device,
#endif
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
&i2c_bfin_twi0_device,
#if !defined(CONFIG_BF542)
&i2c_bfin_twi1_device,
@@ -1261,45 +2007,83 @@ static struct platform_device *ezkit_devices[] __initdata = {
&bfin_crc0_device,
&bfin_crc1_device,
#endif
+#if defined(CONFIG_CRYPTO_DEV_BFIN_CRC)
+ &bfin_crypto_crc_device,
+#endif
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
&bfin_device_gpiokeys,
#endif
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
&ezkit_flash_device,
#endif
-#if defined(CONFIG_SND_BF6XX_I2S) || defined(CONFIG_SND_BF6XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
&bfin_i2s_pcm,
#endif
-#if defined(CONFIG_SND_BF6XX_SOC_I2S) || \
- defined(CONFIG_SND_BF6XX_SOC_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF6XX_SOC_I2S)
&bfin_i2s,
#endif
-#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61) || \
- defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
+ &bfin_ad1836_machine,
+#endif
+#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61)
&adau1761_device,
#endif
-#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
- || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
&bfin_capture_device,
#endif
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_DISPLAY)
+ &bfin_display_device,
+#endif
+
+};
+
+/* Pin control settings */
+static struct pinctrl_map __initdata bfin_pinmux_map[] = {
+ /* per-device maps */
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.0", "pinctrl-adi2.0", NULL, "uart0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.1", "pinctrl-adi2.0", NULL, "uart1"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.0", "pinctrl-adi2.0", NULL, "uart0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.1", "pinctrl-adi2.0", NULL, "uart1"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin-sdh.0", "pinctrl-adi2.0", NULL, "rsi0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("stmmaceth.0", "pinctrl-adi2.0", NULL, "eth0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("adi-spi3.0", "pinctrl-adi2.0", NULL, "spi0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("adi-spi3.1", "pinctrl-adi2.0", NULL, "spi1"),
+ PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.0", "pinctrl-adi2.0", NULL, "twi0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.1", "pinctrl-adi2.0", NULL, "twi1"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin-rotary", "pinctrl-adi2.0", NULL, "rotary"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin_can.0", "pinctrl-adi2.0", NULL, "can0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("physmap-flash.0", "pinctrl-adi2.0", NULL, "smc0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bf609_nl8048.2", "pinctrl-adi2.0", "ppi2_16bgrp", "ppi2"),
+ PIN_MAP_MUX_GROUP("bfin_display.0", "8bit", "pinctrl-adi2.0", "ppi2_8bgrp", "ppi2"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin_display.0", "pinctrl-adi2.0", "ppi2_16bgrp", "ppi2"),
+ PIN_MAP_MUX_GROUP("bfin_display.0", "16bit", "pinctrl-adi2.0", "ppi2_16bgrp", "ppi2"),
+ PIN_MAP_MUX_GROUP("bfin_capture.0", "8bit", "pinctrl-adi2.0", "ppi0_8bgrp", "ppi0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin_capture.0", "pinctrl-adi2.0", "ppi0_16bgrp", "ppi0"),
+ PIN_MAP_MUX_GROUP("bfin_capture.0", "16bit", "pinctrl-adi2.0", "ppi0_16bgrp", "ppi0"),
+ PIN_MAP_MUX_GROUP("bfin_capture.0", "24bit", "pinctrl-adi2.0", "ppi0_24bgrp", "ppi0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.0", "pinctrl-adi2.0", NULL, "sport0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.0", "pinctrl-adi2.0", NULL, "sport0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.1", "pinctrl-adi2.0", NULL, "sport1"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.1", "pinctrl-adi2.0", NULL, "sport1"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.2", "pinctrl-adi2.0", NULL, "sport2"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.2", "pinctrl-adi2.0", NULL, "sport2"),
};
static int __init ezkit_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
+ /* Initialize pinmuxing */
+ pinctrl_register_mappings(bfin_pinmux_map,
+ ARRAY_SIZE(bfin_pinmux_map));
+
i2c_register_board_info(0, bfin_i2c_board_info0,
ARRAY_SIZE(bfin_i2c_board_info0));
i2c_register_board_info(1, bfin_i2c_board_info1,
ARRAY_SIZE(bfin_i2c_board_info1));
-#if defined(CONFIG_STMMAC_ETH) || defined(CONFIG_STMMAC_ETH_MODULE)
- if (!peripheral_request_list(pins, "emac0"))
- printk(KERN_ERR "%s(): request emac pins failed\n", __func__);
-#endif
-
platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
@@ -1318,18 +2102,6 @@ static struct platform_device *ezkit_early_devices[] __initdata = {
&bfin_uart1_device,
#endif
#endif
-
-#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
-#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
- &bfin_sport0_uart_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
- &bfin_sport1_uart_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
- &bfin_sport2_uart_device,
-#endif
-#endif
};
void __init native_machine_early_platform_add_devices(void)
diff --git a/arch/blackfin/mach-bf609/clock.c b/arch/blackfin/mach-bf609/clock.c
index 7f8f529693a..244fa4ab4c5 100644
--- a/arch/blackfin/mach-bf609/clock.c
+++ b/arch/blackfin/mach-bf609/clock.c
@@ -73,33 +73,16 @@ static void clk_reg_write_mask(u32 reg, uint32_t val, uint32_t mask)
bfin_write32(reg, val2);
}
-static void clk_reg_set_bits(u32 reg, uint32_t mask)
-{
- u32 val;
-
- val = bfin_read32(reg);
- val |= mask;
- bfin_write32(reg, val);
-}
-
-static void clk_reg_clear_bits(u32 reg, uint32_t mask)
-{
- u32 val;
-
- val = bfin_read32(reg);
- val &= ~mask;
- bfin_write32(reg, val);
-}
-
int wait_for_pll_align(void)
{
int i = 10000;
while (i-- && (bfin_read32(CGU0_STAT) & CGU0_STAT_CLKSALGN));
if (bfin_read32(CGU0_STAT) & CGU0_STAT_CLKSALGN) {
- printk(KERN_DEBUG "fail to align clk\n");
+ printk(KERN_CRIT "fail to align clk\n");
return -1;
}
+
return 0;
}
@@ -119,6 +102,7 @@ void clk_disable(struct clk *clk)
}
EXPORT_SYMBOL(clk_disable);
+
unsigned long clk_get_rate(struct clk *clk)
{
unsigned long ret = 0;
@@ -130,7 +114,7 @@ EXPORT_SYMBOL(clk_get_rate);
long clk_round_rate(struct clk *clk, unsigned long rate)
{
- long ret = -EIO;
+ long ret = 0;
if (clk->ops && clk->ops->round_rate)
ret = clk->ops->round_rate(clk, rate);
return ret;
@@ -219,6 +203,12 @@ unsigned long sys_clk_get_rate(struct clk *clk)
}
}
+unsigned long dummy_get_rate(struct clk *clk)
+{
+ clk->parent->rate = clk_get_rate(clk->parent);
+ return clk->parent->rate;
+}
+
unsigned long sys_clk_round_rate(struct clk *clk, unsigned long rate)
{
unsigned long max_rate;
@@ -282,6 +272,10 @@ static struct clk_ops sys_clk_ops = {
.round_rate = sys_clk_round_rate,
};
+static struct clk_ops dummy_clk_ops = {
+ .get_rate = dummy_get_rate,
+};
+
static struct clk sys_clkin = {
.name = "SYS_CLKIN",
.rate = CONFIG_CLKIN_HZ,
@@ -363,6 +357,18 @@ static struct clk oclk = {
.parent = &pll_clk,
};
+static struct clk ethclk = {
+ .name = "stmmaceth",
+ .parent = &sclk0,
+ .ops = &dummy_clk_ops,
+};
+
+static struct clk spiclk = {
+ .name = "spi",
+ .parent = &sclk1,
+ .ops = &dummy_clk_ops,
+};
+
static struct clk_lookup bf609_clks[] = {
CLK(sys_clkin, NULL, "SYS_CLKIN"),
CLK(pll_clk, NULL, "PLLCLK"),
@@ -374,6 +380,8 @@ static struct clk_lookup bf609_clks[] = {
CLK(sclk1, NULL, "SCLK1"),
CLK(dclk, NULL, "DCLK"),
CLK(oclk, NULL, "OCLK"),
+ CLK(ethclk, NULL, "stmmaceth"),
+ CLK(spiclk, NULL, "spi"),
};
int __init clk_init(void)
diff --git a/arch/blackfin/mach-bf609/dpm.S b/arch/blackfin/mach-bf609/dpm.S
new file mode 100644
index 00000000000..54d50c689db
--- /dev/null
+++ b/arch/blackfin/mach-bf609/dpm.S
@@ -0,0 +1,157 @@
+#include <linux/linkage.h>
+#include <asm/blackfin.h>
+#include <asm/dpmc.h>
+
+#include <asm/context.S>
+
+#define PM_STACK (COREA_L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12)
+
+.section .l1.text
+ENTRY(_enter_hibernate)
+ /* switch stack to L1 scratch, prepare for ddr srfr */
+ P0.H = HI(PM_STACK);
+ P0.L = LO(PM_STACK);
+ SP = P0;
+
+ call _bf609_ddr_sr;
+ call _bfin_hibernate_syscontrol;
+
+ P0.H = HI(DPM0_RESTORE4);
+ P0.L = LO(DPM0_RESTORE4);
+ P1.H = _bf609_pm_data;
+ P1.L = _bf609_pm_data;
+ [P0] = P1;
+
+ P0.H = HI(DPM0_CTL);
+ P0.L = LO(DPM0_CTL);
+ R3.H = HI(0x00000010);
+ R3.L = LO(0x00000010);
+
+ bfin_init_pm_bench_cycles;
+
+ [P0] = R3;
+
+ SSYNC;
+ENDPROC(_enter_hibernate)
+
+/* DPM wake up interrupt won't wake up core on bf60x if its core IMASK
+ * is disabled. This behavior differ from bf5xx serial processor.
+ */
+ENTRY(_dummy_deepsleep)
+ [--sp] = SYSCFG;
+ [--sp] = (R7:0,P5:0);
+ cli r0;
+
+ /* get wake up interrupt ID */
+ P0.l = LO(SEC_SCI_BASE + SEC_CSID);
+ P0.h = HI(SEC_SCI_BASE + SEC_CSID);
+ R0 = [P0];
+
+ /* ACK wake up interrupt in SEC */
+ P1.l = LO(SEC_END);
+ P1.h = HI(SEC_END);
+
+ [P1] = R0;
+ SSYNC;
+
+ /* restore EVT 11 entry */
+ p0.h = hi(EVT11);
+ p0.l = lo(EVT11);
+ p1.h = _evt_evt11;
+ p1.l = _evt_evt11;
+
+ [p0] = p1;
+ SSYNC;
+
+ (R7:0,P5:0) = [sp++];
+ SYSCFG = [sp++];
+ RTI;
+ENDPROC(_dummy_deepsleep)
+
+ENTRY(_enter_deepsleep)
+ LINK 0xC;
+ [--sp] = (R7:0,P5:0);
+
+ /* Change EVT 11 entry to dummy handler for wake up event */
+ p0.h = hi(EVT11);
+ p0.l = lo(EVT11);
+ p1.h = _dummy_deepsleep;
+ p1.l = _dummy_deepsleep;
+
+ [p0] = p1;
+
+ P0.H = HI(PM_STACK);
+ P0.L = LO(PM_STACK);
+
+ EX_SCRATCH_REG = SP;
+ SP = P0;
+
+ SSYNC;
+
+ /* should put ddr to self refresh mode before sleep */
+ call _bf609_ddr_sr;
+
+ /* Set DPM controller to deep sleep mode */
+ P0.H = HI(DPM0_CTL);
+ P0.L = LO(DPM0_CTL);
+ R3.H = HI(0x00000008);
+ R3.L = LO(0x00000008);
+ [P0] = R3;
+ CSYNC;
+
+ /* Enable evt 11 in IMASK before idle, otherwise core doesn't wake up. */
+ r0.l = 0x800;
+ r0.h = 0;
+ sti r0;
+ SSYNC;
+
+ bfin_init_pm_bench_cycles;
+
+ /* Fall into deep sleep in idle*/
+ idle;
+ SSYNC;
+
+ /* Restore PLL after wake up from deep sleep */
+ call _bf609_resume_ccbuf;
+
+ /* turn ddr out of self refresh mode */
+ call _bf609_ddr_sr_exit;
+
+ SP = EX_SCRATCH_REG;
+
+ (R7:0,P5:0) = [SP++];
+ UNLINK;
+ RTS;
+ENDPROC(_enter_deepsleep)
+
+.section .text
+ENTRY(_bf609_hibernate)
+ bfin_cpu_reg_save;
+ bfin_core_mmr_save;
+
+ P0.H = _bf609_pm_data;
+ P0.L = _bf609_pm_data;
+ R1.H = 0xDEAD;
+ R1.L = 0xBEEF;
+ R2.H = .Lpm_resume_here;
+ R2.L = .Lpm_resume_here;
+ [P0++] = R1;
+ [P0++] = R2;
+ [P0++] = SP;
+
+ P1.H = _enter_hibernate;
+ P1.L = _enter_hibernate;
+
+ call (P1);
+.Lpm_resume_here:
+
+ bfin_core_mmr_restore;
+ bfin_cpu_reg_restore;
+
+ [--sp] = RETI; /* Clear Global Interrupt Disable */
+ SP += 4;
+
+ RTS;
+
+ENDPROC(_bf609_hibernate)
+
diff --git a/arch/blackfin/mach-bf609/hibernate.S b/arch/blackfin/mach-bf609/hibernate.S
deleted file mode 100644
index d37a532519c..00000000000
--- a/arch/blackfin/mach-bf609/hibernate.S
+++ /dev/null
@@ -1,65 +0,0 @@
-#include <linux/linkage.h>
-#include <asm/blackfin.h>
-#include <asm/dpmc.h>
-
-#define PM_STACK (COREA_L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12)
-
-.section .l1.text
-ENTRY(_enter_hibernate)
- /* switch stack to L1 scratch, prepare for ddr srfr */
- P0.H = HI(PM_STACK);
- P0.L = LO(PM_STACK);
- SP = P0;
-
- call _bf609_ddr_sr;
- call _bfin_hibernate_syscontrol;
-
- P0.H = HI(DPM0_RESTORE4);
- P0.L = LO(DPM0_RESTORE4);
- P1.H = _bf609_pm_data;
- P1.L = _bf609_pm_data;
- [P0] = P1;
-
- P0.H = HI(DPM0_CTL);
- P0.L = LO(DPM0_CTL);
- R3.H = HI(0x00000010);
- R3.L = LO(0x00000010);
-
- bfin_init_pm_bench_cycles;
-
- [P0] = R3;
-
- SSYNC;
-ENDPROC(_enter_hibernate_mode)
-
-.section .text
-ENTRY(_bf609_hibernate)
- bfin_cpu_reg_save;
- bfin_core_mmr_save;
-
- P0.H = _bf609_pm_data;
- P0.L = _bf609_pm_data;
- R1.H = 0xDEAD;
- R1.L = 0xBEEF;
- R2.H = .Lpm_resume_here;
- R2.L = .Lpm_resume_here;
- [P0++] = R1;
- [P0++] = R2;
- [P0++] = SP;
-
- P1.H = _enter_hibernate;
- P1.L = _enter_hibernate;
-
- call (P1);
-.Lpm_resume_here:
-
- bfin_core_mmr_restore;
- bfin_cpu_reg_restore;
-
- [--sp] = RETI; /* Clear Global Interrupt Disable */
- SP += 4;
-
- RTS;
-
-ENDPROC(_bf609_hibernate)
-
diff --git a/arch/blackfin/mach-bf609/include/mach/anomaly.h b/arch/blackfin/mach-bf609/include/mach/anomaly.h
index bdd39aefb56..696786e9a53 100644
--- a/arch/blackfin/mach-bf609/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf609/include/mach/anomaly.h
@@ -5,126 +5,133 @@
* and can be replaced with that version at any time
* DO NOT EDIT THIS FILE
*
- * Copyright 2004-2011 Analog Devices Inc.
+ * Copyright 2004-2012 Analog Devices Inc.
* Licensed under the Clear BSD license.
*/
/* This file should be up to date with:
+ * - Revision A, 15/06/2012; ADSP-BF609 Blackfin Processor Anomaly List
*/
#if __SILICON_REVISION__ < 0
-# error will not work on BF506 silicon version
+# error will not work on BF609 silicon version
#endif
#ifndef _MACH_ANOMALY_H_
#define _MACH_ANOMALY_H_
-/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
-#define ANOMALY_05000074 (1)
-/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
-#define ANOMALY_05000119 (1)
-/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
-#define ANOMALY_05000122 (1)
-/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
-#define ANOMALY_05000245 (1)
-/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
-#define ANOMALY_05000254 (1)
-/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
-#define ANOMALY_05000265 (1)
-/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
-#define ANOMALY_05000310 (1)
-/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
-#define ANOMALY_05000366 (1)
-/* Speculative Fetches Can Cause Undesired External FIFO Operations */
-#define ANOMALY_05000416 (1)
-/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */
-#define ANOMALY_05000426 (1)
+/* TRU_STAT.ADDRERR and TRU_ERRADDR.ADDR May Not Reflect the Correct Status */
+#define ANOMALY_16000003 (1)
+/* The EPPI Data Enable (DEN) Signal is Not Functional */
+#define ANOMALY_16000004 (__SILICON_REVISION__ < 1)
+/* Using L1 Instruction Cache with Parity Enabled is Unreliable */
+#define ANOMALY_16000005 (__SILICON_REVISION__ < 1)
+/* SEQSTAT.SYSNMI Clears Upon Entering the NMI ISR */
+#define ANOMALY_16000006 (__SILICON_REVISION__ < 1)
+/* DDR2 Memory Reads May Fail Intermittently */
+#define ANOMALY_16000007 (1)
+/* Instruction Memory Stalls Can Cause IFLUSH to Fail */
+#define ANOMALY_16000008 (1)
+/* TestSET Instruction Cannot Be Interrupted */
+#define ANOMALY_16000009 (1)
/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
-#define ANOMALY_05000443 (1)
-/* UART IrDA Receiver Fails on Extended Bit Pulses */
-#define ANOMALY_05000447 (1)
+#define ANOMALY_16000010 (1)
/* False Hardware Error when RETI Points to Invalid Memory */
-#define ANOMALY_05000461 (1)
-/* PLL Latches Incorrect Settings During Reset */
-#define ANOMALY_05000469 (1)
-/* Incorrect Default MSEL Value in PLL_CTL */
-#define ANOMALY_05000472 (1)
-/* Interrupted SPORT Receive Data Register Read Results In Underflow when SLEN > 15 */
-#define ANOMALY_05000473 (1)
-/* TESTSET Instruction Cannot Be Interrupted */
-#define ANOMALY_05000477 (1)
-/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */
-#define ANOMALY_05000481 (1)
-/* IFLUSH sucks at life */
-#define ANOMALY_05000491 (1)
-/* Tempopary anomaly ID for data loss in MMR read operation if interrupted */
-#define ANOMALY_05001001 (__SILICON_REVISION__ < 1)
+#define ANOMALY_16000011 (1)
+/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */
+#define ANOMALY_16000012 (1)
+/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
+#define ANOMALY_16000013 (1)
+/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
+#define ANOMALY_16000014 (1)
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
+#define ANOMALY_16000015 (1)
+/* Speculative Fetches Can Cause Undesired External FIFO Operations */
+#define ANOMALY_16000017 (1)
+/* RSI Boot Cleanup Routine Does Not Clear Registers */
+#define ANOMALY_16000018 (__SILICON_REVISION__ < 1)
+/* SPI Master Boot Device Auto-detection Frequency is Set Incorrectly */
+#define ANOMALY_16000019 (__SILICON_REVISION__ < 1)
+/* rom_SysControl() Fails to Set DDR0_CTL.INIT for Wakeup From Hibernate */
+#define ANOMALY_16000020 (__SILICON_REVISION__ < 1)
+/* rom_SysControl() Fails to Save and Restore DDR0_PHYCTL3 for Hibernate/Wakeup Sequence */
+#define ANOMALY_16000021 (__SILICON_REVISION__ < 1)
+/* Boot Code Fails to Enable Parity Fault Detection */
+#define ANOMALY_16000022 (__SILICON_REVISION__ < 1)
+/* Rom_SysControl Does not Update CGU0_CLKOUTSEL */
+#define ANOMALY_16000023 (__SILICON_REVISION__ < 1)
+/* Spurious Fault Signaled After Clearing an Externally Generated Fault */
+#define ANOMALY_16000024 (1)
+/* SPORT May Drive Data Pins During Inactive Channels in Multichannel Mode */
+#define ANOMALY_16000025 (1)
+/* USB DMA interrupt status do not show the DMA channel interrupt in the DMA ISR */
+#define ANOMALY_16000027 (__SILICON_REVISION__ < 1)
+/* Default SPI Master Boot Mode Setting is Incorrect */
+#define ANOMALY_16000028 (__SILICON_REVISION__ < 1)
+/* PPI tDFSPI Timing Does Not Meet Data Sheet Specification */
+#define ANOMALY_16000027 (__SILICON_REVISION__ < 1)
+/* Interrupted Core Reads of MMRs May Cause Data Loss */
+#define ANOMALY_16000030 (__SILICON_REVISION__ < 1)
+/* Incorrect Default USB_PLL_OSC.PLLM Value */
+#define ANOMALY_16000031 (__SILICON_REVISION__ < 1)
+/* Core Reads of System MMRs May Cause the Core to Hang */
+#define ANOMALY_16000032 (__SILICON_REVISION__ < 1)
+/* PPI Data Underflow on First Word Not Reported in Certain Modes */
+#define ANOMALY_16000033 (1)
+/* CNV1 Red Pixel Substitution feature not functional in the PVP */
+#define ANOMALY_16000034 (__SILICON_REVISION__ < 1)
+/* IPF0 Output Port Color Separation feature not functional */
+#define ANOMALY_16000035 (__SILICON_REVISION__ < 1)
+/* Spurious USB Wake From Hibernate May Occur When USB_VBUS is Low */
+#define ANOMALY_16000036 (__SILICON_REVISION__ < 1)
+/* Core RAISE 2 Instruction Not Latched When Executed at Priority Level 0, 1, or 2 */
+#define ANOMALY_16000037 (__SILICON_REVISION__ < 1)
+/* Spurious Unhandled NMI or L1 Memory Parity Error Interrupt May Occur Upon Entering the NMI ISR */
+#define ANOMALY_16000038 (__SILICON_REVISION__ < 1)
+/* CGU_STAT.PLOCKERR Bit May be Unreliable */
+#define ANOMALY_16000039 (1)
+/* JTAG Emulator Reads of SDU_IDCODE Alter Register Contents */
+#define ANOMALY_16000040 (1)
+/* IFLUSH Instruction Causes Parity Error When Parity Is Enabled */
+#define ANOMALY_16000041 (1)
+/* Instruction Cache Failure When Parity Is Enabled */
+#define ANOMALY_16000042 (__SILICON_REVISION__ == 1)
/* Anomalies that don't exist on this proc */
-#define ANOMALY_05000099 (0)
-#define ANOMALY_05000120 (0)
-#define ANOMALY_05000125 (0)
-#define ANOMALY_05000149 (0)
#define ANOMALY_05000158 (0)
-#define ANOMALY_05000171 (0)
-#define ANOMALY_05000179 (0)
-#define ANOMALY_05000182 (0)
-#define ANOMALY_05000183 (0)
#define ANOMALY_05000189 (0)
#define ANOMALY_05000198 (0)
-#define ANOMALY_05000202 (0)
-#define ANOMALY_05000215 (0)
-#define ANOMALY_05000219 (0)
#define ANOMALY_05000220 (0)
-#define ANOMALY_05000227 (0)
#define ANOMALY_05000230 (0)
#define ANOMALY_05000231 (0)
-#define ANOMALY_05000233 (0)
-#define ANOMALY_05000234 (0)
-#define ANOMALY_05000242 (0)
#define ANOMALY_05000244 (0)
-#define ANOMALY_05000248 (0)
-#define ANOMALY_05000250 (0)
-#define ANOMALY_05000257 (0)
-#define ANOMALY_05000261 (0)
#define ANOMALY_05000263 (0)
-#define ANOMALY_05000266 (0)
#define ANOMALY_05000273 (0)
#define ANOMALY_05000274 (0)
#define ANOMALY_05000278 (0)
#define ANOMALY_05000281 (0)
-#define ANOMALY_05000283 (0)
-#define ANOMALY_05000285 (0)
#define ANOMALY_05000287 (0)
-#define ANOMALY_05000301 (0)
-#define ANOMALY_05000305 (0)
-#define ANOMALY_05000307 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000312 (0)
-#define ANOMALY_05000315 (0)
#define ANOMALY_05000323 (0)
-#define ANOMALY_05000353 (1)
-#define ANOMALY_05000357 (0)
-#define ANOMALY_05000362 (1)
#define ANOMALY_05000363 (0)
-#define ANOMALY_05000364 (0)
-#define ANOMALY_05000371 (0)
#define ANOMALY_05000380 (0)
-#define ANOMALY_05000386 (0)
-#define ANOMALY_05000389 (0)
-#define ANOMALY_05000400 (0)
-#define ANOMALY_05000402 (0)
-#define ANOMALY_05000412 (0)
-#define ANOMALY_05000432 (0)
-#define ANOMALY_05000440 (0)
#define ANOMALY_05000448 (0)
-#define ANOMALY_05000456 (0)
#define ANOMALY_05000450 (0)
-#define ANOMALY_05000465 (0)
-#define ANOMALY_05000467 (0)
-#define ANOMALY_05000474 (0)
-#define ANOMALY_05000475 (0)
+#define ANOMALY_05000456 (0)
#define ANOMALY_05000480 (0)
-#define ANOMALY_05000485 (0)
+#define ANOMALY_05000481 (1)
+
+/* Reuse BF5xx anomalies IDs for the same anomaly in BF60x */
+#define ANOMALY_05000491 ANOMALY_16000008
+#define ANOMALY_05000477 ANOMALY_16000009
+#define ANOMALY_05000443 ANOMALY_16000010
+#define ANOMALY_05000461 ANOMALY_16000011
+#define ANOMALY_05000426 ANOMALY_16000012
+#define ANOMALY_05000310 ANOMALY_16000013
+#define ANOMALY_05000245 ANOMALY_16000014
+#define ANOMALY_05000074 ANOMALY_16000015
+#define ANOMALY_05000416 ANOMALY_16000017
+
#endif
diff --git a/arch/blackfin/mach-bf609/include/mach/cdefBF60x_base.h b/arch/blackfin/mach-bf609/include/mach/cdefBF60x_base.h
index 4954cf3f7e1..102ee4025ac 100644
--- a/arch/blackfin/mach-bf609/include/mach/cdefBF60x_base.h
+++ b/arch/blackfin/mach-bf609/include/mach/cdefBF60x_base.h
@@ -312,6 +312,8 @@
#define bfin_write_DMC0_EMR1(val) bfin_write32(DMC0_EMR1, val)
#define bfin_read_DMC0_CTL() bfin_read32(DMC0_CTL)
#define bfin_write_DMC0_CTL(val) bfin_write32(DMC0_CTL, val)
+#define bfin_read_DMC0_EFFCTL() bfin_read32(DMC0_EFFCTL)
+#define bfin_write_DMC0_EFFCTL(val) bfin_write32(DMC0_EFFCTL, val)
#define bfin_read_DMC0_STAT() bfin_read32(DMC0_STAT)
#define bfin_write_DMC0_STAT(val) bfin_write32(DMC0_STAT, val)
#define bfin_read_DMC0_DLLCTL() bfin_read32(DMC0_DLLCTL)
diff --git a/arch/blackfin/mach-bf609/include/mach/defBF609.h b/arch/blackfin/mach-bf609/include/mach/defBF609.h
index 19690cc4211..8045ade3437 100644
--- a/arch/blackfin/mach-bf609/include/mach/defBF609.h
+++ b/arch/blackfin/mach-bf609/include/mach/defBF609.h
@@ -11,5 +11,276 @@
#include "defBF60x_base.h"
/* The following are the #defines needed by ADSP-BF609 that are not in the common header */
+/* =========================
+ PIXC Registers
+ ========================= */
+
+/* =========================
+ PIXC0
+ ========================= */
+#define PIXC0_CTL 0xFFC19000 /* PIXC0 Control Register */
+#define PIXC0_PPL 0xFFC19004 /* PIXC0 Pixels Per Line Register */
+#define PIXC0_LPF 0xFFC19008 /* PIXC0 Line Per Frame Register */
+#define PIXC0_HSTART_A 0xFFC1900C /* PIXC0 Overlay A Horizontal Start Register */
+#define PIXC0_HEND_A 0xFFC19010 /* PIXC0 Overlay A Horizontal End Register */
+#define PIXC0_VSTART_A 0xFFC19014 /* PIXC0 Overlay A Vertical Start Register */
+#define PIXC0_VEND_A 0xFFC19018 /* PIXC0 Overlay A Vertical End Register */
+#define PIXC0_TRANSP_A 0xFFC1901C /* PIXC0 Overlay A Transparency Ratio Register */
+#define PIXC0_HSTART_B 0xFFC19020 /* PIXC0 Overlay B Horizontal Start Register */
+#define PIXC0_HEND_B 0xFFC19024 /* PIXC0 Overlay B Horizontal End Register */
+#define PIXC0_VSTART_B 0xFFC19028 /* PIXC0 Overlay B Vertical Start Register */
+#define PIXC0_VEND_B 0xFFC1902C /* PIXC0 Overlay B Vertical End Register */
+#define PIXC0_TRANSP_B 0xFFC19030 /* PIXC0 Overlay B Transparency Ratio Register */
+#define PIXC0_IRQSTAT 0xFFC1903C /* PIXC0 Interrupt Status Register */
+#define PIXC0_CONRY 0xFFC19040 /* PIXC0 RY Conversion Component Register */
+#define PIXC0_CONGU 0xFFC19044 /* PIXC0 GU Conversion Component Register */
+#define PIXC0_CONBV 0xFFC19048 /* PIXC0 BV Conversion Component Register */
+#define PIXC0_CCBIAS 0xFFC1904C /* PIXC0 Conversion Bias Register */
+#define PIXC0_TC 0xFFC19050 /* PIXC0 Transparency Register */
+#define PIXC0_REVID 0xFFC19054 /* PIXC0 PIXC Revision Id */
+
+/* =========================
+ PVP Registers
+ ========================= */
+
+/* =========================
+ PVP0
+ ========================= */
+#define PVP0_REVID 0xFFC1A000 /* PVP0 Revision ID */
+#define PVP0_CTL 0xFFC1A004 /* PVP0 Control */
+#define PVP0_IMSK0 0xFFC1A008 /* PVP0 INTn interrupt line masks */
+#define PVP0_IMSK1 0xFFC1A00C /* PVP0 INTn interrupt line masks */
+#define PVP0_STAT 0xFFC1A010 /* PVP0 Status */
+#define PVP0_ILAT 0xFFC1A014 /* PVP0 Latched status */
+#define PVP0_IREQ0 0xFFC1A018 /* PVP0 INT0 masked latched status */
+#define PVP0_IREQ1 0xFFC1A01C /* PVP0 INT0 masked latched status */
+#define PVP0_OPF0_CFG 0xFFC1A020 /* PVP0 Config */
+#define PVP0_OPF1_CFG 0xFFC1A040 /* PVP0 Config */
+#define PVP0_OPF2_CFG 0xFFC1A060 /* PVP0 Config */
+#define PVP0_OPF0_CTL 0xFFC1A024 /* PVP0 Control */
+#define PVP0_OPF1_CTL 0xFFC1A044 /* PVP0 Control */
+#define PVP0_OPF2_CTL 0xFFC1A064 /* PVP0 Control */
+#define PVP0_OPF3_CFG 0xFFC1A080 /* PVP0 Config */
+#define PVP0_OPF3_CTL 0xFFC1A084 /* PVP0 Control */
+#define PVP0_PEC_CFG 0xFFC1A0A0 /* PVP0 Config */
+#define PVP0_PEC_CTL 0xFFC1A0A4 /* PVP0 Control */
+#define PVP0_PEC_D1TH0 0xFFC1A0A8 /* PVP0 Lower Hysteresis Threshold */
+#define PVP0_PEC_D1TH1 0xFFC1A0AC /* PVP0 Upper Hysteresis Threshold */
+#define PVP0_PEC_D2TH0 0xFFC1A0B0 /* PVP0 Weak Zero Crossing Threshold */
+#define PVP0_PEC_D2TH1 0xFFC1A0B4 /* PVP0 Strong Zero Crossing Threshold */
+#define PVP0_IIM0_CFG 0xFFC1A0C0 /* PVP0 Config */
+#define PVP0_IIM1_CFG 0xFFC1A0E0 /* PVP0 Config */
+#define PVP0_IIM0_CTL 0xFFC1A0C4 /* PVP0 Control */
+#define PVP0_IIM1_CTL 0xFFC1A0E4 /* PVP0 Control */
+#define PVP0_IIM0_SCALE 0xFFC1A0C8 /* PVP0 Scaler Values */
+#define PVP0_IIM1_SCALE 0xFFC1A0E8 /* PVP0 Scaler Values */
+#define PVP0_IIM0_SOVF_STAT 0xFFC1A0CC /* PVP0 Signed Overflow Status */
+#define PVP0_IIM1_SOVF_STAT 0xFFC1A0EC /* PVP0 Signed Overflow Status */
+#define PVP0_IIM0_UOVF_STAT 0xFFC1A0D0 /* PVP0 Unsigned Overflow Status */
+#define PVP0_IIM1_UOVF_STAT 0xFFC1A0F0 /* PVP0 Unsigned Overflow Status */
+#define PVP0_ACU_CFG 0xFFC1A100 /* PVP0 ACU Configuration Register */
+#define PVP0_ACU_CTL 0xFFC1A104 /* PVP0 ACU Control Register */
+#define PVP0_ACU_OFFSET 0xFFC1A108 /* PVP0 SUM constant register */
+#define PVP0_ACU_FACTOR 0xFFC1A10C /* PVP0 PROD constant register */
+#define PVP0_ACU_SHIFT 0xFFC1A110 /* PVP0 Shift constant register */
+#define PVP0_ACU_MIN 0xFFC1A114 /* PVP0 Lower saturation threshold set to MIN */
+#define PVP0_ACU_MAX 0xFFC1A118 /* PVP0 Upper saturation threshold set to MAX */
+#define PVP0_UDS_CFG 0xFFC1A140 /* PVP0 UDS Configuration Register */
+#define PVP0_UDS_CTL 0xFFC1A144 /* PVP0 UDS Control Register */
+#define PVP0_UDS_OHCNT 0xFFC1A148 /* PVP0 UDS Output H Dimension */
+#define PVP0_UDS_OVCNT 0xFFC1A14C /* PVP0 UDS Output V Dimension */
+#define PVP0_UDS_HAVG 0xFFC1A150 /* PVP0 UDS H Taps */
+#define PVP0_UDS_VAVG 0xFFC1A154 /* PVP0 UDS V Taps */
+#define PVP0_IPF0_CFG 0xFFC1A180 /* PVP0 Configuration */
+#define PVP0_IPF0_PIPECTL 0xFFC1A184 /* PVP0 Pipe Control */
+#define PVP0_IPF1_PIPECTL 0xFFC1A1C4 /* PVP0 Pipe Control */
+#define PVP0_IPF0_CTL 0xFFC1A188 /* PVP0 Control */
+#define PVP0_IPF1_CTL 0xFFC1A1C8 /* PVP0 Control */
+#define PVP0_IPF0_TAG 0xFFC1A18C /* PVP0 TAG Value */
+#define PVP0_IPF1_TAG 0xFFC1A1CC /* PVP0 TAG Value */
+#define PVP0_IPF0_FCNT 0xFFC1A190 /* PVP0 Frame Count */
+#define PVP0_IPF1_FCNT 0xFFC1A1D0 /* PVP0 Frame Count */
+#define PVP0_IPF0_HCNT 0xFFC1A194 /* PVP0 Horizontal Count */
+#define PVP0_IPF1_HCNT 0xFFC1A1D4 /* PVP0 Horizontal Count */
+#define PVP0_IPF0_VCNT 0xFFC1A198 /* PVP0 Vertical Count */
+#define PVP0_IPF1_VCNT 0xFFC1A1D8 /* PVP0 Vertical Count */
+#define PVP0_IPF0_HPOS 0xFFC1A19C /* PVP0 Horizontal Position */
+#define PVP0_IPF0_VPOS 0xFFC1A1A0 /* PVP0 Vertical Position */
+#define PVP0_IPF0_TAG_STAT 0xFFC1A1A4 /* PVP0 TAG Status */
+#define PVP0_IPF1_TAG_STAT 0xFFC1A1E4 /* PVP0 TAG Status */
+#define PVP0_IPF1_CFG 0xFFC1A1C0 /* PVP0 Configuration */
+#define PVP0_CNV0_CFG 0xFFC1A200 /* PVP0 Configuration */
+#define PVP0_CNV1_CFG 0xFFC1A280 /* PVP0 Configuration */
+#define PVP0_CNV2_CFG 0xFFC1A300 /* PVP0 Configuration */
+#define PVP0_CNV3_CFG 0xFFC1A380 /* PVP0 Configuration */
+#define PVP0_CNV0_CTL 0xFFC1A204 /* PVP0 Control */
+#define PVP0_CNV1_CTL 0xFFC1A284 /* PVP0 Control */
+#define PVP0_CNV2_CTL 0xFFC1A304 /* PVP0 Control */
+#define PVP0_CNV3_CTL 0xFFC1A384 /* PVP0 Control */
+#define PVP0_CNV0_C00C01 0xFFC1A208 /* PVP0 Coefficients 0, 0 and 0, 1 */
+#define PVP0_CNV1_C00C01 0xFFC1A288 /* PVP0 Coefficients 0, 0 and 0, 1 */
+#define PVP0_CNV2_C00C01 0xFFC1A308 /* PVP0 Coefficients 0, 0 and 0, 1 */
+#define PVP0_CNV3_C00C01 0xFFC1A388 /* PVP0 Coefficients 0, 0 and 0, 1 */
+#define PVP0_CNV0_C02C03 0xFFC1A20C /* PVP0 Coefficients 0, 2 and 0, 3 */
+#define PVP0_CNV1_C02C03 0xFFC1A28C /* PVP0 Coefficients 0, 2 and 0, 3 */
+#define PVP0_CNV2_C02C03 0xFFC1A30C /* PVP0 Coefficients 0, 2 and 0, 3 */
+#define PVP0_CNV3_C02C03 0xFFC1A38C /* PVP0 Coefficients 0, 2 and 0, 3 */
+#define PVP0_CNV0_C04 0xFFC1A210 /* PVP0 Coefficient 0, 4 */
+#define PVP0_CNV1_C04 0xFFC1A290 /* PVP0 Coefficient 0, 4 */
+#define PVP0_CNV2_C04 0xFFC1A310 /* PVP0 Coefficient 0, 4 */
+#define PVP0_CNV3_C04 0xFFC1A390 /* PVP0 Coefficient 0, 4 */
+#define PVP0_CNV0_C10C11 0xFFC1A214 /* PVP0 Coefficients 1, 0 and 1, 1 */
+#define PVP0_CNV1_C10C11 0xFFC1A294 /* PVP0 Coefficients 1, 0 and 1, 1 */
+#define PVP0_CNV2_C10C11 0xFFC1A314 /* PVP0 Coefficients 1, 0 and 1, 1 */
+#define PVP0_CNV3_C10C11 0xFFC1A394 /* PVP0 Coefficients 1, 0 and 1, 1 */
+#define PVP0_CNV0_C12C13 0xFFC1A218 /* PVP0 Coefficients 1, 2 and 1, 3 */
+#define PVP0_CNV1_C12C13 0xFFC1A298 /* PVP0 Coefficients 1, 2 and 1, 3 */
+#define PVP0_CNV2_C12C13 0xFFC1A318 /* PVP0 Coefficients 1, 2 and 1, 3 */
+#define PVP0_CNV3_C12C13 0xFFC1A398 /* PVP0 Coefficients 1, 2 and 1, 3 */
+#define PVP0_CNV0_C14 0xFFC1A21C /* PVP0 Coefficient 1, 4 */
+#define PVP0_CNV1_C14 0xFFC1A29C /* PVP0 Coefficient 1, 4 */
+#define PVP0_CNV2_C14 0xFFC1A31C /* PVP0 Coefficient 1, 4 */
+#define PVP0_CNV3_C14 0xFFC1A39C /* PVP0 Coefficient 1, 4 */
+#define PVP0_CNV0_C20C21 0xFFC1A220 /* PVP0 Coefficients 2, 0 and 2, 1 */
+#define PVP0_CNV1_C20C21 0xFFC1A2A0 /* PVP0 Coefficients 2, 0 and 2, 1 */
+#define PVP0_CNV2_C20C21 0xFFC1A320 /* PVP0 Coefficients 2, 0 and 2, 1 */
+#define PVP0_CNV3_C20C21 0xFFC1A3A0 /* PVP0 Coefficients 2, 0 and 2, 1 */
+#define PVP0_CNV0_C22C23 0xFFC1A224 /* PVP0 Coefficients 2, 2 and 2, 3 */
+#define PVP0_CNV1_C22C23 0xFFC1A2A4 /* PVP0 Coefficients 2, 2 and 2, 3 */
+#define PVP0_CNV2_C22C23 0xFFC1A324 /* PVP0 Coefficients 2, 2 and 2, 3 */
+#define PVP0_CNV3_C22C23 0xFFC1A3A4 /* PVP0 Coefficients 2, 2 and 2, 3 */
+#define PVP0_CNV0_C24 0xFFC1A228 /* PVP0 Coefficient 2,4 */
+#define PVP0_CNV1_C24 0xFFC1A2A8 /* PVP0 Coefficient 2,4 */
+#define PVP0_CNV2_C24 0xFFC1A328 /* PVP0 Coefficient 2,4 */
+#define PVP0_CNV3_C24 0xFFC1A3A8 /* PVP0 Coefficient 2,4 */
+#define PVP0_CNV0_C30C31 0xFFC1A22C /* PVP0 Coefficients 3, 0 and 3, 1 */
+#define PVP0_CNV1_C30C31 0xFFC1A2AC /* PVP0 Coefficients 3, 0 and 3, 1 */
+#define PVP0_CNV2_C30C31 0xFFC1A32C /* PVP0 Coefficients 3, 0 and 3, 1 */
+#define PVP0_CNV3_C30C31 0xFFC1A3AC /* PVP0 Coefficients 3, 0 and 3, 1 */
+#define PVP0_CNV0_C32C33 0xFFC1A230 /* PVP0 Coefficients 3, 2 and 3, 3 */
+#define PVP0_CNV1_C32C33 0xFFC1A2B0 /* PVP0 Coefficients 3, 2 and 3, 3 */
+#define PVP0_CNV2_C32C33 0xFFC1A330 /* PVP0 Coefficients 3, 2 and 3, 3 */
+#define PVP0_CNV3_C32C33 0xFFC1A3B0 /* PVP0 Coefficients 3, 2 and 3, 3 */
+#define PVP0_CNV0_C34 0xFFC1A234 /* PVP0 Coefficient 3, 4 */
+#define PVP0_CNV1_C34 0xFFC1A2B4 /* PVP0 Coefficient 3, 4 */
+#define PVP0_CNV2_C34 0xFFC1A334 /* PVP0 Coefficient 3, 4 */
+#define PVP0_CNV3_C34 0xFFC1A3B4 /* PVP0 Coefficient 3, 4 */
+#define PVP0_CNV0_C40C41 0xFFC1A238 /* PVP0 Coefficients 4, 0 and 4, 1 */
+#define PVP0_CNV1_C40C41 0xFFC1A2B8 /* PVP0 Coefficients 4, 0 and 4, 1 */
+#define PVP0_CNV2_C40C41 0xFFC1A338 /* PVP0 Coefficients 4, 0 and 4, 1 */
+#define PVP0_CNV3_C40C41 0xFFC1A3B8 /* PVP0 Coefficients 4, 0 and 4, 1 */
+#define PVP0_CNV0_C42C43 0xFFC1A23C /* PVP0 Coefficients 4, 2 and 4, 3 */
+#define PVP0_CNV1_C42C43 0xFFC1A2BC /* PVP0 Coefficients 4, 2 and 4, 3 */
+#define PVP0_CNV2_C42C43 0xFFC1A33C /* PVP0 Coefficients 4, 2 and 4, 3 */
+#define PVP0_CNV3_C42C43 0xFFC1A3BC /* PVP0 Coefficients 4, 2 and 4, 3 */
+#define PVP0_CNV0_C44 0xFFC1A240 /* PVP0 Coefficient 4, 4 */
+#define PVP0_CNV1_C44 0xFFC1A2C0 /* PVP0 Coefficient 4, 4 */
+#define PVP0_CNV2_C44 0xFFC1A340 /* PVP0 Coefficient 4, 4 */
+#define PVP0_CNV3_C44 0xFFC1A3C0 /* PVP0 Coefficient 4, 4 */
+#define PVP0_CNV0_SCALE 0xFFC1A244 /* PVP0 Scaling factor */
+#define PVP0_CNV1_SCALE 0xFFC1A2C4 /* PVP0 Scaling factor */
+#define PVP0_CNV2_SCALE 0xFFC1A344 /* PVP0 Scaling factor */
+#define PVP0_CNV3_SCALE 0xFFC1A3C4 /* PVP0 Scaling factor */
+#define PVP0_THC0_CFG 0xFFC1A400 /* PVP0 Configuration */
+#define PVP0_THC1_CFG 0xFFC1A500 /* PVP0 Configuration */
+#define PVP0_THC0_CTL 0xFFC1A404 /* PVP0 Control */
+#define PVP0_THC1_CTL 0xFFC1A504 /* PVP0 Control */
+#define PVP0_THC0_HFCNT 0xFFC1A408 /* PVP0 Number of frames */
+#define PVP0_THC1_HFCNT 0xFFC1A508 /* PVP0 Number of frames */
+#define PVP0_THC0_RMAXREP 0xFFC1A40C /* PVP0 Maximum number of RLE reports */
+#define PVP0_THC1_RMAXREP 0xFFC1A50C /* PVP0 Maximum number of RLE reports */
+#define PVP0_THC0_CMINVAL 0xFFC1A410 /* PVP0 Min clip value */
+#define PVP0_THC1_CMINVAL 0xFFC1A510 /* PVP0 Min clip value */
+#define PVP0_THC0_CMINTH 0xFFC1A414 /* PVP0 Clip Min Threshold */
+#define PVP0_THC1_CMINTH 0xFFC1A514 /* PVP0 Clip Min Threshold */
+#define PVP0_THC0_CMAXTH 0xFFC1A418 /* PVP0 Clip Max Threshold */
+#define PVP0_THC1_CMAXTH 0xFFC1A518 /* PVP0 Clip Max Threshold */
+#define PVP0_THC0_CMAXVAL 0xFFC1A41C /* PVP0 Max clip value */
+#define PVP0_THC1_CMAXVAL 0xFFC1A51C /* PVP0 Max clip value */
+#define PVP0_THC0_TH0 0xFFC1A420 /* PVP0 Threshold Value */
+#define PVP0_THC1_TH0 0xFFC1A520 /* PVP0 Threshold Value */
+#define PVP0_THC0_TH1 0xFFC1A424 /* PVP0 Threshold Value */
+#define PVP0_THC1_TH1 0xFFC1A524 /* PVP0 Threshold Value */
+#define PVP0_THC0_TH2 0xFFC1A428 /* PVP0 Threshold Value */
+#define PVP0_THC1_TH2 0xFFC1A528 /* PVP0 Threshold Value */
+#define PVP0_THC0_TH3 0xFFC1A42C /* PVP0 Threshold Value */
+#define PVP0_THC1_TH3 0xFFC1A52C /* PVP0 Threshold Value */
+#define PVP0_THC0_TH4 0xFFC1A430 /* PVP0 Threshold Value */
+#define PVP0_THC1_TH4 0xFFC1A530 /* PVP0 Threshold Value */
+#define PVP0_THC0_TH5 0xFFC1A434 /* PVP0 Threshold Value */
+#define PVP0_THC1_TH5 0xFFC1A534 /* PVP0 Threshold Value */
+#define PVP0_THC0_TH6 0xFFC1A438 /* PVP0 Threshold Value */
+#define PVP0_THC1_TH6 0xFFC1A538 /* PVP0 Threshold Value */
+#define PVP0_THC0_TH7 0xFFC1A43C /* PVP0 Threshold Value */
+#define PVP0_THC1_TH7 0xFFC1A53C /* PVP0 Threshold Value */
+#define PVP0_THC0_TH8 0xFFC1A440 /* PVP0 Threshold Value */
+#define PVP0_THC1_TH8 0xFFC1A540 /* PVP0 Threshold Value */
+#define PVP0_THC0_TH9 0xFFC1A444 /* PVP0 Threshold Value */
+#define PVP0_THC1_TH9 0xFFC1A544 /* PVP0 Threshold Value */
+#define PVP0_THC0_TH10 0xFFC1A448 /* PVP0 Threshold Value */
+#define PVP0_THC1_TH10 0xFFC1A548 /* PVP0 Threshold Value */
+#define PVP0_THC0_TH11 0xFFC1A44C /* PVP0 Threshold Value */
+#define PVP0_THC1_TH11 0xFFC1A54C /* PVP0 Threshold Value */
+#define PVP0_THC0_TH12 0xFFC1A450 /* PVP0 Threshold Value */
+#define PVP0_THC1_TH12 0xFFC1A550 /* PVP0 Threshold Value */
+#define PVP0_THC0_TH13 0xFFC1A454 /* PVP0 Threshold Value */
+#define PVP0_THC1_TH13 0xFFC1A554 /* PVP0 Threshold Value */
+#define PVP0_THC0_TH14 0xFFC1A458 /* PVP0 Threshold Value */
+#define PVP0_THC1_TH14 0xFFC1A558 /* PVP0 Threshold Value */
+#define PVP0_THC0_TH15 0xFFC1A45C /* PVP0 Threshold Value */
+#define PVP0_THC1_TH15 0xFFC1A55C /* PVP0 Threshold Value */
+#define PVP0_THC0_HHPOS 0xFFC1A460 /* PVP0 Window start X-coordinate */
+#define PVP0_THC1_HHPOS 0xFFC1A560 /* PVP0 Window start X-coordinate */
+#define PVP0_THC0_HVPOS 0xFFC1A464 /* PVP0 Window start Y-coordinate */
+#define PVP0_THC1_HVPOS 0xFFC1A564 /* PVP0 Window start Y-coordinate */
+#define PVP0_THC0_HHCNT 0xFFC1A468 /* PVP0 Window width in X dimension */
+#define PVP0_THC1_HHCNT 0xFFC1A568 /* PVP0 Window width in X dimension */
+#define PVP0_THC0_HVCNT 0xFFC1A46C /* PVP0 Window width in Y dimension */
+#define PVP0_THC1_HVCNT 0xFFC1A56C /* PVP0 Window width in Y dimension */
+#define PVP0_THC0_RHPOS 0xFFC1A470 /* PVP0 Window start X-coordinate */
+#define PVP0_THC1_RHPOS 0xFFC1A570 /* PVP0 Window start X-coordinate */
+#define PVP0_THC0_RVPOS 0xFFC1A474 /* PVP0 Window start Y-coordinate */
+#define PVP0_THC1_RVPOS 0xFFC1A574 /* PVP0 Window start Y-coordinate */
+#define PVP0_THC0_RHCNT 0xFFC1A478 /* PVP0 Window width in X dimension */
+#define PVP0_THC1_RHCNT 0xFFC1A578 /* PVP0 Window width in X dimension */
+#define PVP0_THC0_RVCNT 0xFFC1A47C /* PVP0 Window width in Y dimension */
+#define PVP0_THC1_RVCNT 0xFFC1A57C /* PVP0 Window width in Y dimension */
+#define PVP0_THC0_HFCNT_STAT 0xFFC1A480 /* PVP0 Current Frame counter */
+#define PVP0_THC1_HFCNT_STAT 0xFFC1A580 /* PVP0 Current Frame counter */
+#define PVP0_THC0_HCNT0_STAT 0xFFC1A484 /* PVP0 Histogram counter value */
+#define PVP0_THC1_HCNT0_STAT 0xFFC1A584 /* PVP0 Histogram counter value */
+#define PVP0_THC0_HCNT1_STAT 0xFFC1A488 /* PVP0 Histogram counter value */
+#define PVP0_THC1_HCNT1_STAT 0xFFC1A588 /* PVP0 Histogram counter value */
+#define PVP0_THC0_HCNT2_STAT 0xFFC1A48C /* PVP0 Histogram counter value */
+#define PVP0_THC1_HCNT2_STAT 0xFFC1A58C /* PVP0 Histogram counter value */
+#define PVP0_THC0_HCNT3_STAT 0xFFC1A490 /* PVP0 Histogram counter value */
+#define PVP0_THC1_HCNT3_STAT 0xFFC1A590 /* PVP0 Histogram counter value */
+#define PVP0_THC0_HCNT4_STAT 0xFFC1A494 /* PVP0 Histogram counter value */
+#define PVP0_THC1_HCNT4_STAT 0xFFC1A594 /* PVP0 Histogram counter value */
+#define PVP0_THC0_HCNT5_STAT 0xFFC1A498 /* PVP0 Histogram counter value */
+#define PVP0_THC1_HCNT5_STAT 0xFFC1A598 /* PVP0 Histogram counter value */
+#define PVP0_THC0_HCNT6_STAT 0xFFC1A49C /* PVP0 Histogram counter value */
+#define PVP0_THC1_HCNT6_STAT 0xFFC1A59C /* PVP0 Histogram counter value */
+#define PVP0_THC0_HCNT7_STAT 0xFFC1A4A0 /* PVP0 Histogram counter value */
+#define PVP0_THC1_HCNT7_STAT 0xFFC1A5A0 /* PVP0 Histogram counter value */
+#define PVP0_THC0_HCNT8_STAT 0xFFC1A4A4 /* PVP0 Histogram counter value */
+#define PVP0_THC1_HCNT8_STAT 0xFFC1A5A4 /* PVP0 Histogram counter value */
+#define PVP0_THC0_HCNT9_STAT 0xFFC1A4A8 /* PVP0 Histogram counter value */
+#define PVP0_THC1_HCNT9_STAT 0xFFC1A5A8 /* PVP0 Histogram counter value */
+#define PVP0_THC0_HCNT10_STAT 0xFFC1A4AC /* PVP0 Histogram counter value */
+#define PVP0_THC1_HCNT10_STAT 0xFFC1A5AC /* PVP0 Histogram counter value */
+#define PVP0_THC0_HCNT11_STAT 0xFFC1A4B0 /* PVP0 Histogram counter value */
+#define PVP0_THC1_HCNT11_STAT 0xFFC1A5B0 /* PVP0 Histogram counter value */
+#define PVP0_THC0_HCNT12_STAT 0xFFC1A4B4 /* PVP0 Histogram counter value */
+#define PVP0_THC1_HCNT12_STAT 0xFFC1A5B4 /* PVP0 Histogram counter value */
+#define PVP0_THC0_HCNT13_STAT 0xFFC1A4B8 /* PVP0 Histogram counter value */
+#define PVP0_THC1_HCNT13_STAT 0xFFC1A5B8 /* PVP0 Histogram counter value */
+#define PVP0_THC0_HCNT14_STAT 0xFFC1A4BC /* PVP0 Histogram counter value */
+#define PVP0_THC1_HCNT14_STAT 0xFFC1A5BC /* PVP0 Histogram counter value */
+#define PVP0_THC0_HCNT15_STAT 0xFFC1A4C0 /* PVP0 Histogram counter value */
+#define PVP0_THC1_HCNT15_STAT 0xFFC1A5C0 /* PVP0 Histogram counter value */
+#define PVP0_THC0_RREP_STAT 0xFFC1A4C4 /* PVP0 Number of RLE Reports */
+#define PVP0_THC1_RREP_STAT 0xFFC1A5C4 /* PVP0 Number of RLE Reports */
+#define PVP0_PMA_CFG 0xFFC1A600 /* PVP0 PMA Configuration Register */
#endif /* _DEF_BF609_H */
diff --git a/arch/blackfin/mach-bf609/include/mach/defBF60x_base.h b/arch/blackfin/mach-bf609/include/mach/defBF60x_base.h
index 6aac38544cc..35caa7bc192 100644
--- a/arch/blackfin/mach-bf609/include/mach/defBF60x_base.h
+++ b/arch/blackfin/mach-bf609/include/mach/defBF60x_base.h
@@ -839,6 +839,16 @@
#define PORTG_LOCK 0xFFC03344 /* PORTG Port x GPIO Lock Register */
#define PORTG_REVID 0xFFC0337C /* PORTG Port x GPIO Revision ID */
+/* ==================================================
+ Pads Controller Registers
+ ================================================== */
+
+/* =========================
+ PADS0
+ ========================= */
+#define PADS0_EMAC_PTP_CLKSEL 0xFFC03404 /* PADS0 Clock Selection for EMAC and PTP */
+#define PADS0_TWI_VSEL 0xFFC03408 /* PADS0 TWI Voltage Selection */
+#define PADS0_PORTS_HYST 0xFFC03440 /* PADS0 Hysteresis Enable Register */
/* =========================
PINT Registers
@@ -2665,7 +2675,6 @@
#define DEVSZ_1G 0x400 /* DMC External Bank Size = 1Gbit */
#define DEVSZ_2G 0x500 /* DMC External Bank Size = 2Gbit */
-
/* =========================
L2CTL Registers
========================= */
diff --git a/arch/blackfin/mach-bf609/include/mach/gpio.h b/arch/blackfin/mach-bf609/include/mach/gpio.h
index 127586b1e04..07182513e79 100644
--- a/arch/blackfin/mach-bf609/include/mach/gpio.h
+++ b/arch/blackfin/mach-bf609/include/mach/gpio.h
@@ -123,6 +123,8 @@
#define BFIN_GPIO_PINT 1
+#define NR_PINT_SYS_IRQS 6
+#define NR_PINTS 112
#ifndef __ASSEMBLY__
@@ -150,14 +152,6 @@ struct gpio_port_t {
unsigned long revid;
};
-struct gpio_port_s {
- unsigned short fer;
- unsigned short data;
- unsigned short dir;
- unsigned short inen;
- unsigned int mux;
-};
-
#endif
#include <mach-common/ports-a.h>
diff --git a/arch/blackfin/mach-bf609/include/mach/irq.h b/arch/blackfin/mach-bf609/include/mach/irq.h
index 0004552433b..d1cb6a86f80 100644
--- a/arch/blackfin/mach-bf609/include/mach/irq.h
+++ b/arch/blackfin/mach-bf609/include/mach/irq.h
@@ -9,9 +9,6 @@
#include <mach-common/irq.h>
-#undef BFIN_IRQ
-#define BFIN_IRQ(x) ((x) + IVG15)
-
#define NR_PERI_INTS (5 * 32)
#define IRQ_SEC_ERR BFIN_IRQ(0) /* SEC Error */
@@ -293,11 +290,15 @@
#define NR_MACH_IRQS (IRQ_PG15 + 1)
+#define SEC_SCTL_PRIO_OFFSET 8
+
#ifndef __ASSEMBLY__
#include <linux/types.h>
+extern u8 sec_int_priority[];
+
/*
- * bfin pint registers layout
+ * gpio pint registers layout
*/
struct bfin_pint_regs {
u32 mask_set;
diff --git a/arch/blackfin/mach-bf609/include/mach/pm.h b/arch/blackfin/mach-bf609/include/mach/pm.h
index 036d9bdc889..a1efd936dd3 100644
--- a/arch/blackfin/mach-bf609/include/mach/pm.h
+++ b/arch/blackfin/mach-bf609/include/mach/pm.h
@@ -10,12 +10,16 @@
#define __MACH_BF609_PM_H__
#include <linux/suspend.h>
+#include <linux/platform_device.h>
-int bfin609_pm_enter(suspend_state_t state);
-int bf609_pm_prepare(void);
-void bf609_pm_finish(void);
+extern int bfin609_pm_enter(suspend_state_t state);
+extern int bf609_pm_prepare(void);
+extern void bf609_pm_finish(void);
void bf609_hibernate(void);
void bfin_sec_raise_irq(unsigned int sid);
void coreb_enable(void);
+
+int bf609_nor_flash_init(struct platform_device *pdev);
+void bf609_nor_flash_exit(struct platform_device *pdev);
#endif
diff --git a/arch/blackfin/mach-bf609/include/mach/portmux.h b/arch/blackfin/mach-bf609/include/mach/portmux.h
index 2e1a51c2509..c48bb71a55c 100644
--- a/arch/blackfin/mach-bf609/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf609/include/mach/portmux.h
@@ -7,8 +7,6 @@
#ifndef _MACH_PORTMUX_H_
#define _MACH_PORTMUX_H_
-#define MAX_RESOURCES MAX_BLACKFIN_GPIOS
-
/* EMAC RMII Port Mux */
#define P_MII0_MDC (P_DEFINED | P_IDENT(GPIO_PC6) | P_FUNCT(0))
#define P_MII0_MDIO (P_DEFINED | P_IDENT(GPIO_PC7) | P_FUNCT(0))
@@ -21,6 +19,7 @@
#define P_MII0_CRS (P_DEFINED | P_IDENT(GPIO_PC5) | P_FUNCT(0))
#define P_MII0_ERxER (P_DEFINED | P_IDENT(GPIO_PC4) | P_FUNCT(0))
#define P_MII0_TxCLK (P_DEFINED | P_IDENT(GPIO_PB14) | P_FUNCT(0))
+#define P_MII0_PTPPPS (P_DEFINED | P_IDENT(GPIO_PB15) | P_FUNCT(0))
#define P_RMII0 {\
P_MII0_ETxD0, \
@@ -32,6 +31,7 @@
P_MII0_TxCLK, \
P_MII0_PHYINT, \
P_MII0_CRS, \
+ P_MII0_PTPPPS, \
P_MII0_MDC, \
P_MII0_MDIO, 0}
@@ -46,6 +46,7 @@
#define P_MII1_CRS (P_DEFINED | P_IDENT(GPIO_PE13) | P_FUNCT(0))
#define P_MII1_ERxER (P_DEFINED | P_IDENT(GPIO_PE14) | P_FUNCT(0))
#define P_MII1_TxCLK (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(0))
+#define P_MII1_PTPPPS (P_DEFINED | P_IDENT(GPIO_PC9) | P_FUNCT(0))
#define P_RMII1 {\
P_MII1_ETxD0, \
@@ -57,6 +58,7 @@
P_MII1_TxCLK, \
P_MII1_PHYINT, \
P_MII1_CRS, \
+ P_MII1_PTPPPS, \
P_MII1_MDC, \
P_MII1_MDIO, 0}
diff --git a/arch/blackfin/mach-bf609/ints-priority.c b/arch/blackfin/mach-bf609/ints-priority.c
new file mode 100644
index 00000000000..f68abb9aa79
--- /dev/null
+++ b/arch/blackfin/mach-bf609/ints-priority.c
@@ -0,0 +1,156 @@
+/*
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ *
+ * Set up the interrupt priorities
+ */
+
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <asm/blackfin.h>
+
+u8 sec_int_priority[] = {
+ 255, /* IRQ_SEC_ERR */
+ 255, /* IRQ_CGU_EVT */
+ 254, /* IRQ_WATCH0 */
+ 254, /* IRQ_WATCH1 */
+ 253, /* IRQ_L2CTL0_ECC_ERR */
+ 253, /* IRQ_L2CTL0_ECC_WARN */
+ 253, /* IRQ_C0_DBL_FAULT */
+ 253, /* IRQ_C1_DBL_FAULT */
+ 252, /* IRQ_C0_HW_ERR */
+ 252, /* IRQ_C1_HW_ERR */
+ 255, /* IRQ_C0_NMI_L1_PARITY_ERR */
+ 255, /* IRQ_C1_NMI_L1_PARITY_ERR */
+
+ 50, /* IRQ_TIMER0 */
+ 50, /* IRQ_TIMER1 */
+ 50, /* IRQ_TIMER2 */
+ 50, /* IRQ_TIMER3 */
+ 50, /* IRQ_TIMER4 */
+ 50, /* IRQ_TIMER5 */
+ 50, /* IRQ_TIMER6 */
+ 50, /* IRQ_TIMER7 */
+ 50, /* IRQ_TIMER_STAT */
+ 0, /* IRQ_PINT0 */
+ 0, /* IRQ_PINT1 */
+ 0, /* IRQ_PINT2 */
+ 0, /* IRQ_PINT3 */
+ 0, /* IRQ_PINT4 */
+ 0, /* IRQ_PINT5 */
+ 0, /* IRQ_CNT */
+ 50, /* RQ_PWM0_TRIP */
+ 50, /* IRQ_PWM0_SYNC */
+ 50, /* IRQ_PWM1_TRIP */
+ 50, /* IRQ_PWM1_SYNC */
+ 0, /* IRQ_TWI0 */
+ 0, /* IRQ_TWI1 */
+ 10, /* IRQ_SOFT0 */
+ 10, /* IRQ_SOFT1 */
+ 10, /* IRQ_SOFT2 */
+ 10, /* IRQ_SOFT3 */
+ 0, /* IRQ_ACM_EVT_MISS */
+ 0, /* IRQ_ACM_EVT_COMPLETE */
+ 0, /* IRQ_CAN0_RX */
+ 0, /* IRQ_CAN0_TX */
+ 0, /* IRQ_CAN0_STAT */
+ 100, /* IRQ_SPORT0_TX */
+ 100, /* IRQ_SPORT0_TX_STAT */
+ 100, /* IRQ_SPORT0_RX */
+ 100, /* IRQ_SPORT0_RX_STAT */
+ 100, /* IRQ_SPORT1_TX */
+ 100, /* IRQ_SPORT1_TX_STAT */
+ 100, /* IRQ_SPORT1_RX */
+ 100, /* IRQ_SPORT1_RX_STAT */
+ 100, /* IRQ_SPORT2_TX */
+ 100, /* IRQ_SPORT2_TX_STAT */
+ 100, /* IRQ_SPORT2_RX */
+ 100, /* IRQ_SPORT2_RX_STAT */
+ 0, /* IRQ_SPI0_TX */
+ 0, /* IRQ_SPI0_RX */
+ 0, /* IRQ_SPI0_STAT */
+ 0, /* IRQ_SPI1_TX */
+ 0, /* IRQ_SPI1_RX */
+ 0, /* IRQ_SPI1_STAT */
+ 0, /* IRQ_RSI */
+ 0, /* IRQ_RSI_INT0 */
+ 0, /* IRQ_RSI_INT1 */
+ 0, /* DMA11 Data (SDU) */
+ 0, /* DMA12 Data (Reserved) */
+ 0, /* Reserved */
+ 0, /* Reserved */
+ 30, /* IRQ_EMAC0_STAT */
+ 0, /* EMAC0 Power (Reserved) */
+ 30, /* IRQ_EMAC1_STAT */
+ 0, /* EMAC1 Power (Reserved) */
+ 0, /* IRQ_LP0 */
+ 0, /* IRQ_LP0_STAT */
+ 0, /* IRQ_LP1 */
+ 0, /* IRQ_LP1_STAT */
+ 0, /* IRQ_LP2 */
+ 0, /* IRQ_LP2_STAT */
+ 0, /* IRQ_LP3 */
+ 0, /* IRQ_LP3_STAT */
+ 0, /* IRQ_UART0_TX */
+ 0, /* IRQ_UART0_RX */
+ 0, /* IRQ_UART0_STAT */
+ 0, /* IRQ_UART1_TX */
+ 0, /* IRQ_UART1_RX */
+ 0, /* IRQ_UART1_STAT */
+ 0, /* IRQ_MDMA0_SRC_CRC0 */
+ 0, /* IRQ_MDMA0_DEST_CRC0 */
+ 0, /* IRQ_CRC0_DCNTEXP */
+ 0, /* IRQ_CRC0_ERR */
+ 0, /* IRQ_MDMA1_SRC_CRC1 */
+ 0, /* IRQ_MDMA1_DEST_CRC1 */
+ 0, /* IRQ_CRC1_DCNTEXP */
+ 0, /* IRQ_CRC1_ERR */
+ 0, /* IRQ_MDMA2_SRC */
+ 0, /* IRQ_MDMA2_DEST */
+ 0, /* IRQ_MDMA3_SRC */
+ 0, /* IRQ_MDMA3_DEST */
+ 120, /* IRQ_EPPI0_CH0 */
+ 120, /* IRQ_EPPI0_CH1 */
+ 120, /* IRQ_EPPI0_STAT */
+ 120, /* IRQ_EPPI2_CH0 */
+ 120, /* IRQ_EPPI2_CH1 */
+ 120, /* IRQ_EPPI2_STAT */
+ 120, /* IRQ_EPPI1_CH0 */
+ 120, /* IRQ_EPPI1_CH1 */
+ 120, /* IRQ_EPPI1_STAT */
+ 120, /* IRQ_PIXC_CH0 */
+ 120, /* IRQ_PIXC_CH1 */
+ 120, /* IRQ_PIXC_CH2 */
+ 120, /* IRQ_PIXC_STAT */
+ 120, /* IRQ_PVP_CPDOB */
+ 120, /* IRQ_PVP_CPDOC */
+ 120, /* IRQ_PVP_CPSTAT */
+ 120, /* IRQ_PVP_CPCI */
+ 120, /* IRQ_PVP_STAT0 */
+ 120, /* IRQ_PVP_MPDO */
+ 120, /* IRQ_PVP_MPDI */
+ 120, /* IRQ_PVP_MPSTAT */
+ 120, /* IRQ_PVP_MPCI */
+ 120, /* IRQ_PVP_CPDOA */
+ 120, /* IRQ_PVP_STAT1 */
+ 0, /* IRQ_USB_STAT */
+ 0, /* IRQ_USB_DMA */
+ 0, /* IRQ_TRU_INT0 */
+ 0, /* IRQ_TRU_INT1 */
+ 0, /* IRQ_TRU_INT2 */
+ 0, /* IRQ_TRU_INT3 */
+ 0, /* IRQ_DMAC0_ERROR */
+ 0, /* IRQ_CGU0_ERROR */
+ 0, /* Reserved */
+ 0, /* IRQ_DPM */
+ 0, /* Reserved */
+ 0, /* IRQ_SWU0 */
+ 0, /* IRQ_SWU1 */
+ 0, /* IRQ_SWU2 */
+ 0, /* IRQ_SWU3 */
+ 0, /* IRQ_SWU4 */
+ 0, /* IRQ_SWU4 */
+ 0, /* IRQ_SWU6 */
+};
+
diff --git a/arch/blackfin/mach-bf609/pm.c b/arch/blackfin/mach-bf609/pm.c
index b76966eb16a..b1bfcf434d1 100644
--- a/arch/blackfin/mach-bf609/pm.c
+++ b/arch/blackfin/mach-bf609/pm.c
@@ -11,13 +11,14 @@
#include <linux/interrupt.h>
#include <linux/gpio.h>
#include <linux/irq.h>
-
#include <linux/delay.h>
+#include <linux/syscore_ops.h>
#include <asm/dpmc.h>
#include <asm/pm.h>
#include <mach/pm.h>
#include <asm/blackfin.h>
+#include <asm/mem_init.h>
/***********************************************************/
/* */
@@ -132,60 +133,30 @@ void bfin_cpu_suspend(void)
}
__attribute__((l1_text))
-void bfin_deepsleep(unsigned long mask)
+void bf609_ddr_sr(void)
{
- uint32_t dpm0_ctl;
-
- bfin_write32(DPM0_WAKE_EN, 0x10);
- bfin_write32(DPM0_WAKE_POL, 0x10);
- dpm0_ctl = 0x00000008;
- bfin_write32(DPM0_CTL, dpm0_ctl);
- SSYNC();
- __asm__ __volatile__( \
- ".align 8;" \
- "idle;" \
- : : \
- );
-#ifdef CONFIG_BFIN_PM_WAKEUP_TIME_BENCH
- __asm__ __volatile__(
- "R0 = 0;"
- "CYCLES = R0;"
- "CYCLES2 = R0;"
- "R0 = SYSCFG;"
- "BITSET(R0, 1);"
- "SYSCFG = R0;"
- : : : "R0"
- );
-#endif
-
+ dmc_enter_self_refresh();
}
__attribute__((l1_text))
-void bf609_ddr_sr(void)
+void bf609_ddr_sr_exit(void)
{
- uint32_t reg;
-
- reg = bfin_read_DMC0_CTL();
- reg |= 0x8;
- bfin_write_DMC0_CTL(reg);
+ dmc_exit_self_refresh();
- while (!(bfin_read_DMC0_STAT() & 0x8))
+ /* After wake up from deep sleep and exit DDR from self refress mode,
+ * should wait till CGU PLL is locked.
+ */
+ while (bfin_read32(CGU0_STAT) & CLKSALGN)
continue;
}
__attribute__((l1_text))
-void bf609_ddr_sr_exit(void)
+void bf609_resume_ccbuf(void)
{
- uint32_t reg;
- while (!(bfin_read_DMC0_STAT() & 0x1))
- continue;
-
- reg = bfin_read_DMC0_CTL();
- reg &= ~0x8;
- bfin_write_DMC0_CTL(reg);
+ bfin_write32(DPM0_CCBF_EN, 3);
+ bfin_write32(DPM0_CTL, 2);
- while ((bfin_read_DMC0_STAT() & 0x8))
- continue;
+ while ((bfin_read32(DPM0_STAT) & 0xf) != 1);
}
__attribute__((l1_text))
@@ -203,20 +174,24 @@ void bfin_hibernate_syscontrol(void)
bfin_write32(DPM0_RESTORE5, bfin_read32(DPM0_RESTORE5) | 4);
}
-#ifndef CONFIG_BF60x
-# define SIC_SYSIRQ(irq) (irq - (IRQ_CORETMR + 1))
-#else
-# define SIC_SYSIRQ(irq) ((irq) - IVG15)
-#endif
-void bfin_hibernate(unsigned long mask)
+asmlinkage void enter_deepsleep(void);
+
+__attribute__((l1_text))
+void bfin_deepsleep(unsigned long mask, unsigned long pol_mask)
{
- bfin_write32(DPM0_WAKE_EN, 0x10);
- bfin_write32(DPM0_WAKE_POL, 0x10);
+ bfin_write32(DPM0_WAKE_EN, mask);
+ bfin_write32(DPM0_WAKE_POL, pol_mask);
+ SSYNC();
+ enter_deepsleep();
+}
+
+void bfin_hibernate(unsigned long mask, unsigned long pol_mask)
+{
+ bfin_write32(DPM0_WAKE_EN, mask);
+ bfin_write32(DPM0_WAKE_POL, pol_mask);
bfin_write32(DPM0_PGCNTR, 0x0000FFFF);
bfin_write32(DPM0_HIB_DIS, 0xFFFF);
- printk(KERN_DEBUG "hibernate: restore %x pgcnt %x\n", bfin_read32(DPM0_RESTORE0), bfin_read32(DPM0_PGCNTR));
-
bf609_hibernate();
}
@@ -235,7 +210,7 @@ void bf609_cpu_pm_enter(suspend_state_t state)
#ifdef CONFIG_PM_BFIN_WAKE_PB15
wakeup |= PB15WE;
-# if CONFIG_PM_BFIN_WAKE_PA15_POL
+# if CONFIG_PM_BFIN_WAKE_PB15_POL
wakeup_pol |= PB15WE;
# endif
#endif
@@ -290,10 +265,11 @@ void bf609_cpu_pm_enter(suspend_state_t state)
printk(KERN_DEBUG "Unable to get irq wake\n");
if (state == PM_SUSPEND_STANDBY)
- bfin_deepsleep(wakeup);
+ bfin_deepsleep(wakeup, wakeup_pol);
else {
- bfin_hibernate(wakeup);
+ bfin_hibernate(wakeup, wakeup_pol);
}
+
}
int bf609_cpu_pm_prepare(void)
@@ -312,20 +288,36 @@ static struct bfin_cpu_pm_fns bf609_cpu_pm = {
.finish = bf609_cpu_pm_finish,
};
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static int smc_pm_syscore_suspend(void)
+{
+ bf609_nor_flash_exit(NULL);
+ return 0;
+}
+
+static void smc_pm_syscore_resume(void)
+{
+ bf609_nor_flash_init(NULL);
+}
+
+static struct syscore_ops smc_pm_syscore_ops = {
+ .suspend = smc_pm_syscore_suspend,
+ .resume = smc_pm_syscore_resume,
+};
+#endif
+
static irqreturn_t test_isr(int irq, void *dev_id)
{
printk(KERN_DEBUG "gpio irq %d\n", irq);
+ if (irq == 231)
+ bfin_sec_raise_irq(BFIN_SYSIRQ(IRQ_SOFT1));
return IRQ_HANDLED;
}
static irqreturn_t dpm0_isr(int irq, void *dev_id)
{
- uint32_t wake_stat;
-
- wake_stat = bfin_read32(DPM0_WAKE_STAT);
- printk(KERN_DEBUG "enter %s wake stat %08x\n", __func__, wake_stat);
-
- bfin_write32(DPM0_WAKE_STAT, wake_stat);
+ bfin_write32(DPM0_WAKE_STAT, bfin_read32(DPM0_WAKE_STAT));
+ bfin_write32(CGU0_STAT, bfin_read32(CGU0_STAT));
return IRQ_HANDLED;
}
@@ -334,7 +326,11 @@ static int __init bf609_init_pm(void)
int irq;
int error;
-#if CONFIG_PM_BFIN_WAKE_PE12
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+ register_syscore_ops(&smc_pm_syscore_ops);
+#endif
+
+#ifdef CONFIG_PM_BFIN_WAKE_PE12
irq = gpio_to_irq(GPIO_PE12);
if (irq < 0) {
error = irq;
@@ -342,16 +338,19 @@ static int __init bf609_init_pm(void)
GPIO_PE12, error);
}
- error = request_irq(irq, test_isr, IRQF_TRIGGER_RISING | IRQF_NO_SUSPEND, "gpiope12", NULL);
+ error = request_irq(irq, test_isr, IRQF_TRIGGER_RISING | IRQF_NO_SUSPEND
+ | IRQF_FORCE_RESUME, "gpiope12", NULL);
if(error < 0)
printk(KERN_DEBUG "Unable to get irq\n");
#endif
- error = request_irq(IRQ_CGU_EVT, dpm0_isr, IRQF_NO_SUSPEND, "cgu0 event", NULL);
+ error = request_irq(IRQ_CGU_EVT, dpm0_isr, IRQF_NO_SUSPEND |
+ IRQF_FORCE_RESUME, "cgu0 event", NULL);
if(error < 0)
printk(KERN_DEBUG "Unable to get irq\n");
- error = request_irq(IRQ_DPM, dpm0_isr, IRQF_NO_SUSPEND, "dpm0 event", NULL);
+ error = request_irq(IRQ_DPM, dpm0_isr, IRQF_NO_SUSPEND |
+ IRQF_FORCE_RESUME, "dpm0 event", NULL);
if (error < 0)
printk(KERN_DEBUG "Unable to get irq\n");
diff --git a/arch/blackfin/mach-bf609/scb.c b/arch/blackfin/mach-bf609/scb.c
new file mode 100644
index 00000000000..ac1f07c3359
--- /dev/null
+++ b/arch/blackfin/mach-bf609/scb.c
@@ -0,0 +1,363 @@
+/*
+ * arch/blackfin/mach-common/scb-init.c - reprogram system cross bar priority
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <asm/blackfin.h>
+#include <asm/scb.h>
+
+struct scb_mi_prio scb_data[] = {
+#ifdef CONFIG_SCB0_MI0
+ { REG_SCB0_ARBR0, REG_SCB0_ARBW0, 32, {
+ CONFIG_SCB0_MI0_SLOT0,
+ CONFIG_SCB0_MI0_SLOT1,
+ CONFIG_SCB0_MI0_SLOT2,
+ CONFIG_SCB0_MI0_SLOT3,
+ CONFIG_SCB0_MI0_SLOT4,
+ CONFIG_SCB0_MI0_SLOT5,
+ CONFIG_SCB0_MI0_SLOT6,
+ CONFIG_SCB0_MI0_SLOT7,
+ CONFIG_SCB0_MI0_SLOT8,
+ CONFIG_SCB0_MI0_SLOT9,
+ CONFIG_SCB0_MI0_SLOT10,
+ CONFIG_SCB0_MI0_SLOT11,
+ CONFIG_SCB0_MI0_SLOT12,
+ CONFIG_SCB0_MI0_SLOT13,
+ CONFIG_SCB0_MI0_SLOT14,
+ CONFIG_SCB0_MI0_SLOT15,
+ CONFIG_SCB0_MI0_SLOT16,
+ CONFIG_SCB0_MI0_SLOT17,
+ CONFIG_SCB0_MI0_SLOT18,
+ CONFIG_SCB0_MI0_SLOT19,
+ CONFIG_SCB0_MI0_SLOT20,
+ CONFIG_SCB0_MI0_SLOT21,
+ CONFIG_SCB0_MI0_SLOT22,
+ CONFIG_SCB0_MI0_SLOT23,
+ CONFIG_SCB0_MI0_SLOT24,
+ CONFIG_SCB0_MI0_SLOT25,
+ CONFIG_SCB0_MI0_SLOT26,
+ CONFIG_SCB0_MI0_SLOT27,
+ CONFIG_SCB0_MI0_SLOT28,
+ CONFIG_SCB0_MI0_SLOT29,
+ CONFIG_SCB0_MI0_SLOT30,
+ CONFIG_SCB0_MI0_SLOT31
+ },
+ },
+#endif
+#ifdef CONFIG_SCB0_MI1
+ { REG_SCB0_ARBR1, REG_SCB0_ARBW1, 32, {
+ CONFIG_SCB0_MI1_SLOT0,
+ CONFIG_SCB0_MI1_SLOT1,
+ CONFIG_SCB0_MI1_SLOT2,
+ CONFIG_SCB0_MI1_SLOT3,
+ CONFIG_SCB0_MI1_SLOT4,
+ CONFIG_SCB0_MI1_SLOT5,
+ CONFIG_SCB0_MI1_SLOT6,
+ CONFIG_SCB0_MI1_SLOT7,
+ CONFIG_SCB0_MI1_SLOT8,
+ CONFIG_SCB0_MI1_SLOT9,
+ CONFIG_SCB0_MI1_SLOT10,
+ CONFIG_SCB0_MI1_SLOT11,
+ CONFIG_SCB0_MI1_SLOT12,
+ CONFIG_SCB0_MI1_SLOT13,
+ CONFIG_SCB0_MI1_SLOT14,
+ CONFIG_SCB0_MI1_SLOT15,
+ CONFIG_SCB0_MI1_SLOT16,
+ CONFIG_SCB0_MI1_SLOT17,
+ CONFIG_SCB0_MI1_SLOT18,
+ CONFIG_SCB0_MI1_SLOT19,
+ CONFIG_SCB0_MI1_SLOT20,
+ CONFIG_SCB0_MI1_SLOT21,
+ CONFIG_SCB0_MI1_SLOT22,
+ CONFIG_SCB0_MI1_SLOT23,
+ CONFIG_SCB0_MI1_SLOT24,
+ CONFIG_SCB0_MI1_SLOT25,
+ CONFIG_SCB0_MI1_SLOT26,
+ CONFIG_SCB0_MI1_SLOT27,
+ CONFIG_SCB0_MI1_SLOT28,
+ CONFIG_SCB0_MI1_SLOT29,
+ CONFIG_SCB0_MI1_SLOT30,
+ CONFIG_SCB0_MI1_SLOT31
+ },
+ },
+#endif
+#ifdef CONFIG_SCB0_MI2
+ { REG_SCB0_ARBR2, REG_SCB0_ARBW2, 32, {
+ CONFIG_SCB0_MI2_SLOT0,
+ CONFIG_SCB0_MI2_SLOT1,
+ CONFIG_SCB0_MI2_SLOT2,
+ CONFIG_SCB0_MI2_SLOT3,
+ CONFIG_SCB0_MI2_SLOT4,
+ CONFIG_SCB0_MI2_SLOT5,
+ CONFIG_SCB0_MI2_SLOT6,
+ CONFIG_SCB0_MI2_SLOT7,
+ CONFIG_SCB0_MI2_SLOT8,
+ CONFIG_SCB0_MI2_SLOT9,
+ CONFIG_SCB0_MI2_SLOT10,
+ CONFIG_SCB0_MI2_SLOT11,
+ CONFIG_SCB0_MI2_SLOT12,
+ CONFIG_SCB0_MI2_SLOT13,
+ CONFIG_SCB0_MI2_SLOT14,
+ CONFIG_SCB0_MI2_SLOT15,
+ CONFIG_SCB0_MI2_SLOT16,
+ CONFIG_SCB0_MI2_SLOT17,
+ CONFIG_SCB0_MI2_SLOT18,
+ CONFIG_SCB0_MI2_SLOT19,
+ CONFIG_SCB0_MI2_SLOT20,
+ CONFIG_SCB0_MI2_SLOT21,
+ CONFIG_SCB0_MI2_SLOT22,
+ CONFIG_SCB0_MI2_SLOT23,
+ CONFIG_SCB0_MI2_SLOT24,
+ CONFIG_SCB0_MI2_SLOT25,
+ CONFIG_SCB0_MI2_SLOT26,
+ CONFIG_SCB0_MI2_SLOT27,
+ CONFIG_SCB0_MI2_SLOT28,
+ CONFIG_SCB0_MI2_SLOT29,
+ CONFIG_SCB0_MI2_SLOT30,
+ CONFIG_SCB0_MI2_SLOT31
+ },
+ },
+#endif
+#ifdef CONFIG_SCB0_MI3
+ { REG_SCB0_ARBR3, REG_SCB0_ARBW3, 32, {
+ CONFIG_SCB0_MI3_SLOT0,
+ CONFIG_SCB0_MI3_SLOT1,
+ CONFIG_SCB0_MI3_SLOT2,
+ CONFIG_SCB0_MI3_SLOT3,
+ CONFIG_SCB0_MI3_SLOT4,
+ CONFIG_SCB0_MI3_SLOT5,
+ CONFIG_SCB0_MI3_SLOT6,
+ CONFIG_SCB0_MI3_SLOT7,
+ CONFIG_SCB0_MI3_SLOT8,
+ CONFIG_SCB0_MI3_SLOT9,
+ CONFIG_SCB0_MI3_SLOT10,
+ CONFIG_SCB0_MI3_SLOT11,
+ CONFIG_SCB0_MI3_SLOT12,
+ CONFIG_SCB0_MI3_SLOT13,
+ CONFIG_SCB0_MI3_SLOT14,
+ CONFIG_SCB0_MI3_SLOT15,
+ CONFIG_SCB0_MI3_SLOT16,
+ CONFIG_SCB0_MI3_SLOT17,
+ CONFIG_SCB0_MI3_SLOT18,
+ CONFIG_SCB0_MI3_SLOT19,
+ CONFIG_SCB0_MI3_SLOT20,
+ CONFIG_SCB0_MI3_SLOT21,
+ CONFIG_SCB0_MI3_SLOT22,
+ CONFIG_SCB0_MI3_SLOT23,
+ CONFIG_SCB0_MI3_SLOT24,
+ CONFIG_SCB0_MI3_SLOT25,
+ CONFIG_SCB0_MI3_SLOT26,
+ CONFIG_SCB0_MI3_SLOT27,
+ CONFIG_SCB0_MI3_SLOT28,
+ CONFIG_SCB0_MI3_SLOT29,
+ CONFIG_SCB0_MI3_SLOT30,
+ CONFIG_SCB0_MI3_SLOT31
+ },
+ },
+#endif
+#ifdef CONFIG_SCB0_MI4
+ { REG_SCB0_ARBR4, REG_SCB4_ARBW0, 32, {
+ CONFIG_SCB0_MI4_SLOT0,
+ CONFIG_SCB0_MI4_SLOT1,
+ CONFIG_SCB0_MI4_SLOT2,
+ CONFIG_SCB0_MI4_SLOT3,
+ CONFIG_SCB0_MI4_SLOT4,
+ CONFIG_SCB0_MI4_SLOT5,
+ CONFIG_SCB0_MI4_SLOT6,
+ CONFIG_SCB0_MI4_SLOT7,
+ CONFIG_SCB0_MI4_SLOT8,
+ CONFIG_SCB0_MI4_SLOT9,
+ CONFIG_SCB0_MI4_SLOT10,
+ CONFIG_SCB0_MI4_SLOT11,
+ CONFIG_SCB0_MI4_SLOT12,
+ CONFIG_SCB0_MI4_SLOT13,
+ CONFIG_SCB0_MI4_SLOT14,
+ CONFIG_SCB0_MI4_SLOT15,
+ CONFIG_SCB0_MI4_SLOT16,
+ CONFIG_SCB0_MI4_SLOT17,
+ CONFIG_SCB0_MI4_SLOT18,
+ CONFIG_SCB0_MI4_SLOT19,
+ CONFIG_SCB0_MI4_SLOT20,
+ CONFIG_SCB0_MI4_SLOT21,
+ CONFIG_SCB0_MI4_SLOT22,
+ CONFIG_SCB0_MI4_SLOT23,
+ CONFIG_SCB0_MI4_SLOT24,
+ CONFIG_SCB0_MI4_SLOT25,
+ CONFIG_SCB0_MI4_SLOT26,
+ CONFIG_SCB0_MI4_SLOT27,
+ CONFIG_SCB0_MI4_SLOT28,
+ CONFIG_SCB0_MI4_SLOT29,
+ CONFIG_SCB0_MI4_SLOT30,
+ CONFIG_SCB0_MI4_SLOT31
+ },
+ },
+#endif
+#ifdef CONFIG_SCB0_MI5
+ { REG_SCB0_ARBR5, REG_SCB0_ARBW5, 16, {
+ CONFIG_SCB0_MI5_SLOT0,
+ CONFIG_SCB0_MI5_SLOT1,
+ CONFIG_SCB0_MI5_SLOT2,
+ CONFIG_SCB0_MI5_SLOT3,
+ CONFIG_SCB0_MI5_SLOT4,
+ CONFIG_SCB0_MI5_SLOT5,
+ CONFIG_SCB0_MI5_SLOT6,
+ CONFIG_SCB0_MI5_SLOT7,
+ CONFIG_SCB0_MI5_SLOT8,
+ CONFIG_SCB0_MI5_SLOT9,
+ CONFIG_SCB0_MI5_SLOT10,
+ CONFIG_SCB0_MI5_SLOT11,
+ CONFIG_SCB0_MI5_SLOT12,
+ CONFIG_SCB0_MI5_SLOT13,
+ CONFIG_SCB0_MI5_SLOT14,
+ CONFIG_SCB0_MI5_SLOT15
+ },
+ },
+#endif
+#ifdef CONFIG_SCB1_MI0
+ { REG_SCB1_ARBR0, REG_SCB1_ARBW0, 20, {
+ CONFIG_SCB1_MI0_SLOT0,
+ CONFIG_SCB1_MI0_SLOT1,
+ CONFIG_SCB1_MI0_SLOT2,
+ CONFIG_SCB1_MI0_SLOT3,
+ CONFIG_SCB1_MI0_SLOT4,
+ CONFIG_SCB1_MI0_SLOT5,
+ CONFIG_SCB1_MI0_SLOT6,
+ CONFIG_SCB1_MI0_SLOT7,
+ CONFIG_SCB1_MI0_SLOT8,
+ CONFIG_SCB1_MI0_SLOT9,
+ CONFIG_SCB1_MI0_SLOT10,
+ CONFIG_SCB1_MI0_SLOT11,
+ CONFIG_SCB1_MI0_SLOT12,
+ CONFIG_SCB1_MI0_SLOT13,
+ CONFIG_SCB1_MI0_SLOT14,
+ CONFIG_SCB1_MI0_SLOT15,
+ CONFIG_SCB1_MI0_SLOT16,
+ CONFIG_SCB1_MI0_SLOT17,
+ CONFIG_SCB1_MI0_SLOT18,
+ CONFIG_SCB1_MI0_SLOT19
+ },
+ },
+#endif
+#ifdef CONFIG_SCB2_MI0
+ { REG_SCB2_ARBR0, REG_SCB2_ARBW0, 10, {
+ CONFIG_SCB2_MI0_SLOT0,
+ CONFIG_SCB2_MI0_SLOT1,
+ CONFIG_SCB2_MI0_SLOT2,
+ CONFIG_SCB2_MI0_SLOT3,
+ CONFIG_SCB2_MI0_SLOT4,
+ CONFIG_SCB2_MI0_SLOT5,
+ CONFIG_SCB2_MI0_SLOT6,
+ CONFIG_SCB2_MI0_SLOT7,
+ CONFIG_SCB2_MI0_SLOT8,
+ CONFIG_SCB2_MI0_SLOT9
+ },
+ },
+#endif
+#ifdef CONFIG_SCB3_MI0
+ { REG_SCB3_ARBR0, REG_SCB3_ARBW0, 16, {
+ CONFIG_SCB3_MI0_SLOT0,
+ CONFIG_SCB3_MI0_SLOT1,
+ CONFIG_SCB3_MI0_SLOT2,
+ CONFIG_SCB3_MI0_SLOT3,
+ CONFIG_SCB3_MI0_SLOT4,
+ CONFIG_SCB3_MI0_SLOT5,
+ CONFIG_SCB3_MI0_SLOT6,
+ CONFIG_SCB3_MI0_SLOT7,
+ CONFIG_SCB3_MI0_SLOT8,
+ CONFIG_SCB3_MI0_SLOT9,
+ CONFIG_SCB3_MI0_SLOT10,
+ CONFIG_SCB3_MI0_SLOT11,
+ CONFIG_SCB3_MI0_SLOT12,
+ CONFIG_SCB3_MI0_SLOT13,
+ CONFIG_SCB3_MI0_SLOT14,
+ CONFIG_SCB3_MI0_SLOT15
+ },
+ },
+#endif
+#ifdef CONFIG_SCB4_MI0
+ { REG_SCB4_ARBR0, REG_SCB4_ARBW0, 16, {
+ CONFIG_SCB4_MI0_SLOT0,
+ CONFIG_SCB4_MI0_SLOT1,
+ CONFIG_SCB4_MI0_SLOT2,
+ CONFIG_SCB4_MI0_SLOT3,
+ CONFIG_SCB4_MI0_SLOT4,
+ CONFIG_SCB4_MI0_SLOT5,
+ CONFIG_SCB4_MI0_SLOT6,
+ CONFIG_SCB4_MI0_SLOT7,
+ CONFIG_SCB4_MI0_SLOT8,
+ CONFIG_SCB4_MI0_SLOT9,
+ CONFIG_SCB4_MI0_SLOT10,
+ CONFIG_SCB4_MI0_SLOT11,
+ CONFIG_SCB4_MI0_SLOT12,
+ CONFIG_SCB4_MI0_SLOT13,
+ CONFIG_SCB4_MI0_SLOT14,
+ CONFIG_SCB4_MI0_SLOT15
+ },
+ },
+#endif
+#ifdef CONFIG_SCB5_MI0
+ { REG_SCB5_ARBR0, REG_SCB5_ARBW0, 8, {
+ CONFIG_SCB5_MI0_SLOT0,
+ CONFIG_SCB5_MI0_SLOT1,
+ CONFIG_SCB5_MI0_SLOT2,
+ CONFIG_SCB5_MI0_SLOT3,
+ CONFIG_SCB5_MI0_SLOT4,
+ CONFIG_SCB5_MI0_SLOT5,
+ CONFIG_SCB5_MI0_SLOT6,
+ CONFIG_SCB5_MI0_SLOT7
+ },
+ },
+#endif
+#ifdef CONFIG_SCB6_MI0
+ { REG_SCB6_ARBR0, REG_SCB6_ARBW0, 4, {
+ CONFIG_SCB6_MI0_SLOT0,
+ CONFIG_SCB6_MI0_SLOT1,
+ CONFIG_SCB6_MI0_SLOT2,
+ CONFIG_SCB6_MI0_SLOT3
+ },
+ },
+#endif
+#ifdef CONFIG_SCB7_MI0
+ { REG_SCB7_ARBR0, REG_SCB7_ARBW0, 6, {
+ CONFIG_SCB7_MI0_SLOT0,
+ CONFIG_SCB7_MI0_SLOT1,
+ CONFIG_SCB7_MI0_SLOT2,
+ CONFIG_SCB7_MI0_SLOT3,
+ CONFIG_SCB7_MI0_SLOT4,
+ CONFIG_SCB7_MI0_SLOT5
+ },
+ },
+#endif
+#ifdef CONFIG_SCB8_MI0
+ { REG_SCB8_ARBR0, REG_SCB8_ARBW0, 8, {
+ CONFIG_SCB8_MI0_SLOT0,
+ CONFIG_SCB8_MI0_SLOT1,
+ CONFIG_SCB8_MI0_SLOT2,
+ CONFIG_SCB8_MI0_SLOT3,
+ CONFIG_SCB8_MI0_SLOT4,
+ CONFIG_SCB8_MI0_SLOT5,
+ CONFIG_SCB8_MI0_SLOT6,
+ CONFIG_SCB8_MI0_SLOT7
+ },
+ },
+#endif
+#ifdef CONFIG_SCB9_MI0
+ { REG_SCB9_ARBR0, REG_SCB9_ARBW0, 10, {
+ CONFIG_SCB9_MI0_SLOT0,
+ CONFIG_SCB9_MI0_SLOT1,
+ CONFIG_SCB9_MI0_SLOT2,
+ CONFIG_SCB9_MI0_SLOT3,
+ CONFIG_SCB9_MI0_SLOT4,
+ CONFIG_SCB9_MI0_SLOT5,
+ CONFIG_SCB9_MI0_SLOT6,
+ CONFIG_SCB9_MI0_SLOT7,
+ CONFIG_SCB9_MI0_SLOT8,
+ CONFIG_SCB9_MI0_SLOT9
+ },
+ },
+#endif
+ { 0, }
+};
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-24 08:53:36 +0000