diff options
Diffstat (limited to 'arch/blackfin/mach-bf609/boards/ezkit.c')
| -rw-r--r-- | arch/blackfin/mach-bf609/boards/ezkit.c | 978 |
1 files changed, 875 insertions, 103 deletions
diff --git a/arch/blackfin/mach-bf609/boards/ezkit.c b/arch/blackfin/mach-bf609/boards/ezkit.c index ac64f47217c..e2c0b024ce8 100644 --- a/arch/blackfin/mach-bf609/boards/ezkit.c +++ b/arch/blackfin/mach-bf609/boards/ezkit.c @@ -17,7 +17,10 @@ #include <linux/i2c.h> #include <linux/interrupt.h> #include <linux/usb/musb.h> -#include <asm/bfin6xx_spi.h> +#include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/platform_data/pinctrl-adi2.h> +#include <linux/spi/adi_spi3.h> #include <asm/dma.h> #include <asm/gpio.h> #include <asm/nand.h> @@ -36,7 +39,7 @@ const char bfin_board_name[] = "ADI BF609-EZKIT"; * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) #include <linux/usb/isp1760.h> static struct resource bfin_isp1760_resources[] = { [0] = { @@ -71,7 +74,7 @@ static struct platform_device bfin_isp1760_device = { }; #endif -#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) +#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY) #include <asm/bfin_rotary.h> static struct bfin_rotary_platform_data bfin_rotary_data = { @@ -102,21 +105,34 @@ static struct platform_device bfin_rotary_device = { }; #endif -#if defined(CONFIG_STMMAC_ETH) || defined(CONFIG_STMMAC_ETH_MODULE) +#if IS_ENABLED(CONFIG_STMMAC_ETH) #include <linux/stmmac.h> - -static unsigned short pins[] = P_RMII0; +#include <linux/phy.h> static struct stmmac_mdio_bus_data phy_private_data = { - .bus_id = 0, .phy_mask = 1, }; +static struct stmmac_dma_cfg eth_dma_cfg = { + .pbl = 2, +}; + +int stmmac_ptp_clk_init(struct platform_device *pdev, void *priv) +{ + bfin_write32(PADS0_EMAC_PTP_CLKSEL, 0); + return 0; +} + static struct plat_stmmacenet_data eth_private_data = { + .has_gmac = 1, .bus_id = 0, .enh_desc = 1, .phy_addr = 1, .mdio_bus_data = &phy_private_data, + .dma_cfg = ð_dma_cfg, + .force_thresh_dma_mode = 1, + .interface = PHY_INTERFACE_MODE_RMII, + .init = stmmac_ptp_clk_init, }; static struct platform_device bfin_eth_device = { @@ -143,7 +159,7 @@ static struct platform_device bfin_eth_device = { }; #endif -#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE) +#if IS_ENABLED(CONFIG_INPUT_ADXL34X) #include <linux/input/adxl34x.h> static const struct adxl34x_platform_data adxl34x_info = { .x_axis_offset = 0, @@ -182,14 +198,14 @@ static const struct adxl34x_platform_data adxl34x_info = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -197,6 +213,18 @@ static struct resource bfin_uart0_resources[] = { .end = UART0_RXDIV+4, .flags = IORESOURCE_MEM, }, +#ifdef CONFIG_EARLY_PRINTK + { + .start = PORTD_FER, + .end = PORTD_FER+2, + .flags = IORESOURCE_REG, + }, + { + .start = PORTD_MUX, + .end = PORTD_MUX+3, + .flags = IORESOURCE_REG, + }, +#endif { .start = IRQ_UART0_TX, .end = IRQ_UART0_TX, @@ -261,6 +289,13 @@ static struct resource bfin_uart1_resources[] = { .end = UART1_RXDIV+4, .flags = IORESOURCE_MEM, }, +#ifdef CONFIG_EARLY_PRINTK + { + .start = PORTG_FER_SET, + .end = PORTG_FER_SET+2, + .flags = IORESOURCE_REG, + }, +#endif { .start = IRQ_UART1_TX, .end = IRQ_UART1_TX, @@ -320,7 +355,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -373,7 +408,7 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) static struct resource musb_resources[] = { [0] = { .start = 0xFFCC1000, @@ -429,7 +464,7 @@ static struct platform_device musb_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -534,7 +569,7 @@ static struct platform_device bfin_sport2_uart_device = { #endif #endif -#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) +#if IS_ENABLED(CONFIG_CAN_BFIN) static unsigned short bfin_can0_peripherals[] = { P_CAN0_RX, P_CAN0_TX, 0 @@ -575,7 +610,7 @@ static struct platform_device bfin_can0_device = { #endif -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) static struct mtd_partition partition_info[] = { { .name = "bootloader(nand)", @@ -625,7 +660,7 @@ static struct platform_device bfin_nand_device = { }; #endif -#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SDH_BFIN) static struct bfin_sd_host bfin_sdh_data = { .dma_chan = CH_RSI, @@ -642,7 +677,7 @@ static struct platform_device bfin_sdh_device = { }; #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition ezkit_partitions[] = { { .name = "bootloader(nor)", @@ -659,16 +694,9 @@ static struct mtd_partition ezkit_partitions[] = { }, }; -int bf609_nor_flash_init(struct platform_device *dev) +int bf609_nor_flash_init(struct platform_device *pdev) { #define CONFIG_SMC_GCTL_VAL 0x00000010 - const unsigned short pins[] = { - P_A3, P_A4, P_A5, P_A6, P_A7, P_A8, P_A9, P_A10, P_A11, P_A12, - P_A13, P_A14, P_A15, P_A16, P_A17, P_A18, P_A19, P_A20, P_A21, - P_A22, P_A23, P_A24, P_A25, P_NORCK, 0, - }; - - peripheral_request_list(pins, "smc0"); bfin_write32(SMC_GCTL, CONFIG_SMC_GCTL_VAL); bfin_write32(SMC_B0CTL, 0x01002011); @@ -677,11 +705,20 @@ int bf609_nor_flash_init(struct platform_device *dev) return 0; } +void bf609_nor_flash_exit(struct platform_device *pdev) +{ + bfin_write32(SMC_GCTL, 0); +} + static struct physmap_flash_data ezkit_flash_data = { .width = 2, .parts = ezkit_partitions, - .init = bf609_nor_flash_init, + .init = bf609_nor_flash_init, + .exit = bf609_nor_flash_exit, .nr_parts = ARRAY_SIZE(ezkit_partitions), +#ifdef CONFIG_ROMKERNEL + .probe_type = "map_rom", +#endif }; static struct resource ezkit_flash_resource = { @@ -701,8 +738,7 @@ static struct platform_device ezkit_flash_device = { }; #endif -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) /* SPI flash chip (w25q32) */ static struct mtd_partition bfin_spi_flash_partitions[] = { { @@ -728,26 +764,25 @@ static struct flash_platform_data bfin_spi_flash_data = { .type = "w25q32", }; -static struct bfin6xx_spi_chip spi_flash_chip_info = { +static struct adi_spi3_chip spi_flash_chip_info = { .enable_dma = true, /* use dma transfer with this chip*/ }; #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) -static struct bfin6xx_spi_chip spidev_chip_info = { +#if IS_ENABLED(CONFIG_SPI_SPIDEV) +static struct adi_spi3_chip spidev_chip_info = { .enable_dma = true, }; #endif -#if defined(CONFIG_SND_BF6XX_I2S) || defined(CONFIG_SND_BF6XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) static struct platform_device bfin_i2s_pcm = { .name = "bfin-i2s-pcm-audio", .id = -1, }; #endif -#if defined(CONFIG_SND_BF6XX_SOC_I2S) || \ - defined(CONFIG_SND_BF6XX_SOC_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF6XX_SOC_I2S) #include <asm/bfin_sport3.h> static struct resource bfin_snd_resources[] = { { @@ -801,14 +836,27 @@ static struct platform_device bfin_i2s = { }; #endif -#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61) || \ - defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) +static const char * const ad1836_link[] = { + "bfin-i2s.0", + "spi0.76", +}; +static struct platform_device bfin_ad1836_machine = { + .name = "bfin-snd-ad1836", + .id = -1, + .dev = { + .platform_data = (void *)ad1836_link, + }, +}; +#endif + +#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61) static struct platform_device adau1761_device = { .name = "bfin-eval-adau1x61", }; #endif -#if defined(CONFIG_SND_SOC_ADAU1761) || defined(CONFIG_SND_SOC_ADAU1761_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_ADAU1761) #include <sound/adau17x1.h> static struct adau1761_platform_data adau1761_info = { .lineout_mode = ADAU1761_OUTPUT_MODE_LINE, @@ -816,8 +864,7 @@ static struct adau1761_platform_data adau1761_info = { }; #endif -#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \ - || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE) #include <linux/videodev2.h> #include <media/blackfin/bfin_capture.h> #include <media/blackfin/ppi.h> @@ -825,6 +872,12 @@ static struct adau1761_platform_data adau1761_info = { static const unsigned short ppi_req[] = { P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3, P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7, + P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11, + P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15, +#if !IS_ENABLED(CONFIG_VIDEO_VS6624) + P_PPI0_D16, P_PPI0_D17, P_PPI0_D18, P_PPI0_D19, + P_PPI0_D20, P_PPI0_D21, P_PPI0_D22, P_PPI0_D23, +#endif P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2, 0, }; @@ -837,8 +890,7 @@ static const struct ppi_info ppi_info = { .pin_req = ppi_req, }; -#if defined(CONFIG_VIDEO_VS6624) \ - || defined(CONFIG_VIDEO_VS6624_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_VS6624) static struct v4l2_input vs6624_inputs[] = { { .index = 0, @@ -855,7 +907,7 @@ static struct bcap_route vs6624_routes[] = { }, }; -static const unsigned vs6624_ce_pin = GPIO_PD1; +static const unsigned vs6624_ce_pin = GPIO_PE4; static struct bfin_capture_config bfin_capture_data = { .card_name = "BF609", @@ -871,7 +923,129 @@ static struct bfin_capture_config bfin_capture_data = { .ppi_info = &ppi_info, .ppi_control = (PACK_EN | DLEN_8 | EPPI_CTL_FS1HI_FS2HI | EPPI_CTL_POLC3 | EPPI_CTL_SYNC2 | EPPI_CTL_NON656), - .blank_clocks = 8, + .blank_pixels = 4, +}; +#endif + +#if IS_ENABLED(CONFIG_VIDEO_ADV7842) +#include <media/adv7842.h> + +static struct v4l2_input adv7842_inputs[] = { + { + .index = 0, + .name = "Composite", + .type = V4L2_INPUT_TYPE_CAMERA, + .std = V4L2_STD_ALL, + .capabilities = V4L2_IN_CAP_STD, + }, + { + .index = 1, + .name = "S-Video", + .type = V4L2_INPUT_TYPE_CAMERA, + .std = V4L2_STD_ALL, + .capabilities = V4L2_IN_CAP_STD, + }, + { + .index = 2, + .name = "Component", + .type = V4L2_INPUT_TYPE_CAMERA, + .capabilities = V4L2_IN_CAP_DV_TIMINGS, + }, + { + .index = 3, + .name = "VGA", + .type = V4L2_INPUT_TYPE_CAMERA, + .capabilities = V4L2_IN_CAP_DV_TIMINGS, + }, + { + .index = 4, + .name = "HDMI", + .type = V4L2_INPUT_TYPE_CAMERA, + .capabilities = V4L2_IN_CAP_DV_TIMINGS, + }, +}; + +static struct bcap_route adv7842_routes[] = { + { + .input = 3, + .output = 0, + .ppi_control = (PACK_EN | DLEN_8 | EPPI_CTL_FLDSEL + | EPPI_CTL_ACTIVE656), + }, + { + .input = 4, + .output = 0, + }, + { + .input = 2, + .output = 0, + }, + { + .input = 1, + .output = 0, + }, + { + .input = 0, + .output = 1, + .ppi_control = (EPPI_CTL_SPLTWRD | PACK_EN | DLEN_16 + | EPPI_CTL_FS1LO_FS2LO | EPPI_CTL_POLC2 + | EPPI_CTL_SYNC2 | EPPI_CTL_NON656), + }, +}; + +static struct adv7842_output_format adv7842_opf[] = { + { + .op_ch_sel = ADV7842_OP_CH_SEL_BRG, + .op_format_sel = ADV7842_OP_FORMAT_SEL_SDR_ITU656_8, + .op_656_range = 1, + .blank_data = 1, + .insert_av_codes = 1, + }, + { + .op_ch_sel = ADV7842_OP_CH_SEL_RGB, + .op_format_sel = ADV7842_OP_FORMAT_SEL_SDR_ITU656_16, + .op_656_range = 1, + .blank_data = 1, + }, +}; + +static struct adv7842_platform_data adv7842_data = { + .opf = adv7842_opf, + .num_opf = ARRAY_SIZE(adv7842_opf), + .ain_sel = ADV7842_AIN10_11_12_NC_SYNC_4_1, + .prim_mode = ADV7842_PRIM_MODE_SDP, + .vid_std_select = ADV7842_SDP_VID_STD_CVBS_SD_4x1, + .hdmi_free_run_enable = 1, + .sdp_free_run_auto = 1, + .llc_dll_phase = 0x10, + .i2c_sdp_io = 0x40, + .i2c_sdp = 0x41, + .i2c_cp = 0x42, + .i2c_vdp = 0x43, + .i2c_afe = 0x44, + .i2c_hdmi = 0x45, + .i2c_repeater = 0x46, + .i2c_edid = 0x47, + .i2c_infoframe = 0x48, + .i2c_cec = 0x49, + .i2c_avlink = 0x4a, + .i2c_ex = 0x26, +}; + +static struct bfin_capture_config bfin_capture_data = { + .card_name = "BF609", + .inputs = adv7842_inputs, + .num_inputs = ARRAY_SIZE(adv7842_inputs), + .routes = adv7842_routes, + .i2c_adapter_id = 0, + .board_info = { + .type = "adv7842", + .addr = 0x20, + .platform_data = (void *)&adv7842_data, + }, + .ppi_info = &ppi_info, + .ppi_control = (PACK_EN | DLEN_8 | EPPI_CTL_FLDSEL + | EPPI_CTL_ACTIVE656), }; #endif @@ -883,6 +1057,153 @@ static struct platform_device bfin_capture_device = { }; #endif +#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_DISPLAY) +#include <linux/videodev2.h> +#include <media/blackfin/bfin_display.h> +#include <media/blackfin/ppi.h> + +static const unsigned short ppi_req_disp[] = { + P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3, + P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7, + P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11, + P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15, + P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2, + 0, +}; + +static const struct ppi_info ppi_info = { + .type = PPI_TYPE_EPPI3, + .dma_ch = CH_EPPI0_CH0, + .irq_err = IRQ_EPPI0_STAT, + .base = (void __iomem *)EPPI0_STAT, + .pin_req = ppi_req_disp, +}; + +#if IS_ENABLED(CONFIG_VIDEO_ADV7511) +#include <media/adv7511.h> + +static struct v4l2_output adv7511_outputs[] = { + { + .index = 0, + .name = "HDMI", + .type = V4L2_INPUT_TYPE_CAMERA, + .capabilities = V4L2_OUT_CAP_DV_TIMINGS, + }, +}; + +static struct disp_route adv7511_routes[] = { + { + .output = 0, + }, +}; + +static struct adv7511_platform_data adv7511_data = { + .edid_addr = 0x7e, + .i2c_ex = 0x25, +}; + +static struct bfin_display_config bfin_display_data = { + .card_name = "BF609", + .outputs = adv7511_outputs, + .num_outputs = ARRAY_SIZE(adv7511_outputs), + .routes = adv7511_routes, + .i2c_adapter_id = 0, + .board_info = { + .type = "adv7511", + .addr = 0x39, + .platform_data = (void *)&adv7511_data, + }, + .ppi_info = &ppi_info, + .ppi_control = (EPPI_CTL_SPLTWRD | PACK_EN | DLEN_16 + | EPPI_CTL_FS1LO_FS2LO | EPPI_CTL_POLC3 + | EPPI_CTL_IFSGEN | EPPI_CTL_SYNC2 + | EPPI_CTL_NON656 | EPPI_CTL_DIR), +}; +#endif + +#if IS_ENABLED(CONFIG_VIDEO_ADV7343) +#include <media/adv7343.h> + +static struct v4l2_output adv7343_outputs[] = { + { + .index = 0, + .name = "Composite", + .type = V4L2_OUTPUT_TYPE_ANALOG, + .std = V4L2_STD_ALL, + .capabilities = V4L2_OUT_CAP_STD, + }, + { + .index = 1, + .name = "S-Video", + .type = V4L2_OUTPUT_TYPE_ANALOG, + .std = V4L2_STD_ALL, + .capabilities = V4L2_OUT_CAP_STD, + }, + { + .index = 2, + .name = "Component", + .type = V4L2_OUTPUT_TYPE_ANALOG, + .std = V4L2_STD_ALL, + .capabilities = V4L2_OUT_CAP_STD, + }, + +}; + +static struct disp_route adv7343_routes[] = { + { + .output = ADV7343_COMPOSITE_ID, + }, + { + .output = ADV7343_SVIDEO_ID, + }, + { + .output = ADV7343_COMPONENT_ID, + }, +}; + +static struct adv7343_platform_data adv7343_data = { + .mode_config = { + .sleep_mode = false, + .pll_control = false, + .dac_1 = true, + .dac_2 = true, + .dac_3 = true, + .dac_4 = true, + .dac_5 = true, + .dac_6 = true, + }, + .sd_config = { + .sd_dac_out1 = false, + .sd_dac_out2 = false, + }, +}; + +static struct bfin_display_config bfin_display_data = { + .card_name = "BF609", + .outputs = adv7343_outputs, + .num_outputs = ARRAY_SIZE(adv7343_outputs), + .routes = adv7343_routes, + .i2c_adapter_id = 0, + .board_info = { + .type = "adv7343", + .addr = 0x2b, + .platform_data = (void *)&adv7343_data, + }, + .ppi_info = &ppi_info_disp, + .ppi_control = (PACK_EN | DLEN_8 | EPPI_CTL_FS1LO_FS2LO + | EPPI_CTL_POLC3 | EPPI_CTL_BLANKGEN | EPPI_CTL_SYNC2 + | EPPI_CTL_NON656 | EPPI_CTL_DIR), +}; +#endif + +static struct platform_device bfin_display_device = { + .name = "bfin_display", + .dev = { + .platform_data = &bfin_display_data, + }, +}; +#endif + #if defined(CONFIG_BFIN_CRC) #define BFIN_CRC_NAME "bfin-crc" @@ -947,7 +1268,40 @@ static struct platform_device bfin_crc1_device = { }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if defined(CONFIG_CRYPTO_DEV_BFIN_CRC) +#define BFIN_CRYPTO_CRC_NAME "bfin-hmac-crc" +#define BFIN_CRYPTO_CRC_POLY_DATA 0x5c5c5c5c + +static struct resource bfin_crypto_crc_resources[] = { + { + .start = REG_CRC0_CTL, + .end = REG_CRC0_REVID+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_CRC0_DCNTEXP, + .end = IRQ_CRC0_DCNTEXP, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_MEM_STREAM0_SRC_CRC0, + .end = CH_MEM_STREAM0_SRC_CRC0, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device bfin_crypto_crc_device = { + .name = BFIN_CRYPTO_CRC_NAME, + .id = 0, + .num_resources = ARRAY_SIZE(bfin_crypto_crc_resources), + .resource = bfin_crypto_crc_resources, + .dev = { + .platform_data = (void *)BFIN_CRYPTO_CRC_POLY_DATA, + }, +}; +#endif + +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -963,40 +1317,411 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { }; #endif +#ifdef CONFIG_PINCTRL_ADI2 + +# define ADI_PINT_DEVNAME "adi-gpio-pint" +# define ADI_GPIO_DEVNAME "adi-gpio" +# define ADI_PINCTRL_DEVNAME "pinctrl-adi2" + +static struct platform_device bfin_pinctrl_device = { + .name = ADI_PINCTRL_DEVNAME, + .id = 0, +}; + +static struct resource bfin_pint0_resources[] = { + { + .start = PINT0_MASK_SET, + .end = PINT0_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT0, + .end = IRQ_PINT0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint0_device = { + .name = ADI_PINT_DEVNAME, + .id = 0, + .num_resources = ARRAY_SIZE(bfin_pint0_resources), + .resource = bfin_pint0_resources, +}; + +static struct resource bfin_pint1_resources[] = { + { + .start = PINT1_MASK_SET, + .end = PINT1_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT1, + .end = IRQ_PINT1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint1_device = { + .name = ADI_PINT_DEVNAME, + .id = 1, + .num_resources = ARRAY_SIZE(bfin_pint1_resources), + .resource = bfin_pint1_resources, +}; + +static struct resource bfin_pint2_resources[] = { + { + .start = PINT2_MASK_SET, + .end = PINT2_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT2, + .end = IRQ_PINT2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint2_device = { + .name = ADI_PINT_DEVNAME, + .id = 2, + .num_resources = ARRAY_SIZE(bfin_pint2_resources), + .resource = bfin_pint2_resources, +}; + +static struct resource bfin_pint3_resources[] = { + { + .start = PINT3_MASK_SET, + .end = PINT3_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT3, + .end = IRQ_PINT3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint3_device = { + .name = ADI_PINT_DEVNAME, + .id = 3, + .num_resources = ARRAY_SIZE(bfin_pint3_resources), + .resource = bfin_pint3_resources, +}; + +static struct resource bfin_pint4_resources[] = { + { + .start = PINT4_MASK_SET, + .end = PINT4_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT4, + .end = IRQ_PINT4, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint4_device = { + .name = ADI_PINT_DEVNAME, + .id = 4, + .num_resources = ARRAY_SIZE(bfin_pint4_resources), + .resource = bfin_pint4_resources, +}; + +static struct resource bfin_pint5_resources[] = { + { + .start = PINT5_MASK_SET, + .end = PINT5_LATCH + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PINT5, + .end = IRQ_PINT5, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pint5_device = { + .name = ADI_PINT_DEVNAME, + .id = 5, + .num_resources = ARRAY_SIZE(bfin_pint5_resources), + .resource = bfin_pint5_resources, +}; + +static struct resource bfin_gpa_resources[] = { + { + .start = PORTA_FER, + .end = PORTA_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { /* optional */ + .start = IRQ_PA0, + .end = IRQ_PA0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpa_pdata = { + .port_pin_base = GPIO_PA0, + .port_width = GPIO_BANKSIZE, + .pint_id = 0, /* PINT0 */ + .pint_assign = true, /* PINT upper 16 bit */ + .pint_map = 0, /* mapping mask in PINT */ +}; + +static struct platform_device bfin_gpa_device = { + .name = ADI_GPIO_DEVNAME, + .id = 0, + .num_resources = ARRAY_SIZE(bfin_gpa_resources), + .resource = bfin_gpa_resources, + .dev = { + .platform_data = &bfin_gpa_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpb_resources[] = { + { + .start = PORTB_FER, + .end = PORTB_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PB0, + .end = IRQ_PB0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpb_pdata = { + .port_pin_base = GPIO_PB0, + .port_width = GPIO_BANKSIZE, + .pint_id = 0, + .pint_assign = false, + .pint_map = 1, +}; + +static struct platform_device bfin_gpb_device = { + .name = ADI_GPIO_DEVNAME, + .id = 1, + .num_resources = ARRAY_SIZE(bfin_gpb_resources), + .resource = bfin_gpb_resources, + .dev = { + .platform_data = &bfin_gpb_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpc_resources[] = { + { + .start = PORTC_FER, + .end = PORTC_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PC0, + .end = IRQ_PC0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpc_pdata = { + .port_pin_base = GPIO_PC0, + .port_width = GPIO_BANKSIZE, + .pint_id = 1, + .pint_assign = false, + .pint_map = 1, +}; + +static struct platform_device bfin_gpc_device = { + .name = ADI_GPIO_DEVNAME, + .id = 2, + .num_resources = ARRAY_SIZE(bfin_gpc_resources), + .resource = bfin_gpc_resources, + .dev = { + .platform_data = &bfin_gpc_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpd_resources[] = { + { + .start = PORTD_FER, + .end = PORTD_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PD0, + .end = IRQ_PD0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpd_pdata = { + .port_pin_base = GPIO_PD0, + .port_width = GPIO_BANKSIZE, + .pint_id = 2, + .pint_assign = false, + .pint_map = 1, +}; + +static struct platform_device bfin_gpd_device = { + .name = ADI_GPIO_DEVNAME, + .id = 3, + .num_resources = ARRAY_SIZE(bfin_gpd_resources), + .resource = bfin_gpd_resources, + .dev = { + .platform_data = &bfin_gpd_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpe_resources[] = { + { + .start = PORTE_FER, + .end = PORTE_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PE0, + .end = IRQ_PE0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpe_pdata = { + .port_pin_base = GPIO_PE0, + .port_width = GPIO_BANKSIZE, + .pint_id = 3, + .pint_assign = false, + .pint_map = 1, +}; + +static struct platform_device bfin_gpe_device = { + .name = ADI_GPIO_DEVNAME, + .id = 4, + .num_resources = ARRAY_SIZE(bfin_gpe_resources), + .resource = bfin_gpe_resources, + .dev = { + .platform_data = &bfin_gpe_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpf_resources[] = { + { + .start = PORTF_FER, + .end = PORTF_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PF0, + .end = IRQ_PF0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpf_pdata = { + .port_pin_base = GPIO_PF0, + .port_width = GPIO_BANKSIZE, + .pint_id = 4, + .pint_assign = false, + .pint_map = 1, +}; + +static struct platform_device bfin_gpf_device = { + .name = ADI_GPIO_DEVNAME, + .id = 5, + .num_resources = ARRAY_SIZE(bfin_gpf_resources), + .resource = bfin_gpf_resources, + .dev = { + .platform_data = &bfin_gpf_pdata, /* Passed to driver */ + }, +}; + +static struct resource bfin_gpg_resources[] = { + { + .start = PORTG_FER, + .end = PORTG_MUX + 3, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PG0, + .end = IRQ_PG0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct adi_pinctrl_gpio_platform_data bfin_gpg_pdata = { + .port_pin_base = GPIO_PG0, + .port_width = GPIO_BANKSIZE, + .pint_id = 5, + .pint_assign = false, + .pint_map = 1, +}; + +static struct platform_device bfin_gpg_device = { + .name = ADI_GPIO_DEVNAME, + .id = 6, + .num_resources = ARRAY_SIZE(bfin_gpg_resources), + .resource = bfin_gpg_resources, + .dev = { + .platform_data = &bfin_gpg_pdata, /* Passed to driver */ + }, +}; + +#endif + +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) +#include <linux/input.h> +#include <linux/gpio_keys.h> + +static struct gpio_keys_button bfin_gpio_keys_table[] = { + {BTN_0, GPIO_PB10, 1, "gpio-keys: BTN0"}, + {BTN_1, GPIO_PE1, 1, "gpio-keys: BTN1"}, +}; + +static struct gpio_keys_platform_data bfin_gpio_keys_data = { + .buttons = bfin_gpio_keys_table, + .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), +}; + +static struct platform_device bfin_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &bfin_gpio_keys_data, + }, +}; +#endif + static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, /* Framework bus number */ - .chip_select = 1, /* SPI_SSEL1*/ + .chip_select = MAX_CTRL_CS + GPIO_PD11, /* SPI_SSEL1*/ .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, - .irq = IRQ_PB4, /* old boards (<=Rev 1.3) use IRQ_PJ11 */ + .irq = IRQ_PD9, .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 2, + .chip_select = MAX_CTRL_CS + GPIO_PC15, /* SPI_SSEL4 */ }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 1, + .chip_select = MAX_CTRL_CS + GPIO_PD11, /* SPI_SSEL1*/ .controller_data = &spidev_chip_info, }, #endif -#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE) +#if IS_ENABLED(CONFIG_INPUT_ADXL34X_SPI) { .modalias = "adxl34x", .platform_data = &adxl34x_info, @@ -1008,7 +1733,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif }; -#if defined(CONFIG_SPI_BFIN6XX) || defined(CONFIG_SPI_BFIN6XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_ADI_V3) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { { @@ -1049,13 +1774,13 @@ static struct resource bfin_spi1_resource[] = { }; /* SPI controller data */ -static struct bfin6xx_spi_master bf60x_spi_master_info0 = { - .num_chipselect = 4, +static struct adi_spi3_master bf60x_spi_master_info0 = { + .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, }; static struct platform_device bf60x_spi_master0 = { - .name = "bfin-spi", + .name = "adi-spi3", .id = 0, /* Bus number */ .num_resources = ARRAY_SIZE(bfin_spi0_resource), .resource = bfin_spi0_resource, @@ -1064,13 +1789,13 @@ static struct platform_device bf60x_spi_master0 = { }, }; -static struct bfin6xx_spi_master bf60x_spi_master_info1 = { - .num_chipselect = 4, +static struct adi_spi3_master bf60x_spi_master_info1 = { + .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0}, }; static struct platform_device bf60x_spi_master1 = { - .name = "bfin-spi", + .name = "adi-spi3", .id = 1, /* Bus number */ .num_resources = ARRAY_SIZE(bfin_spi1_resource), .resource = bfin_spi1_resource, @@ -1080,7 +1805,7 @@ static struct platform_device bf60x_spi_master1 = { }; #endif /* spi master and devices */ -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; static struct resource bfin_twi0_resource[] = { @@ -1133,19 +1858,24 @@ static struct platform_device i2c_bfin_twi1_device = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info0[] = { -#if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE) +#if IS_ENABLED(CONFIG_INPUT_ADXL34X_I2C) { I2C_BOARD_INFO("adxl34x", 0x53), .irq = IRQ_PC5, .platform_data = (void *)&adxl34x_info, }, #endif -#if defined(CONFIG_SND_SOC_ADAU1761) || defined(CONFIG_SND_SOC_ADAU1761_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_ADAU1761) { I2C_BOARD_INFO("adau1761", 0x38), .platform_data = (void *)&adau1761_info }, #endif +#if IS_ENABLED(CONFIG_SND_SOC_SSM2602) + { + I2C_BOARD_INFO("ssm2602", 0x1b), + }, +#endif }; static struct i2c_board_info __initdata bfin_i2c_board_info1[] = { @@ -1182,12 +1912,28 @@ static struct platform_device bfin_dpmc = { static struct platform_device *ezkit_devices[] __initdata = { &bfin_dpmc, - -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if defined(CONFIG_PINCTRL_ADI2) + &bfin_pinctrl_device, + &bfin_pint0_device, + &bfin_pint1_device, + &bfin_pint2_device, + &bfin_pint3_device, + &bfin_pint4_device, + &bfin_pint5_device, + &bfin_gpa_device, + &bfin_gpb_device, + &bfin_gpc_device, + &bfin_gpd_device, + &bfin_gpe_device, + &bfin_gpf_device, + &bfin_gpg_device, +#endif + +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -1196,7 +1942,7 @@ static struct platform_device *ezkit_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -1205,19 +1951,19 @@ static struct platform_device *ezkit_devices[] __initdata = { #endif #endif -#if defined(CONFIG_STMMAC_ETH) || defined(CONFIG_STMMAC_ETH_MODULE) +#if IS_ENABLED(CONFIG_STMMAC_ETH) &bfin_eth_device, #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) &musb_device, #endif -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) &bfin_isp1760_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -1229,28 +1975,28 @@ static struct platform_device *ezkit_devices[] __initdata = { #endif #endif -#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) +#if IS_ENABLED(CONFIG_CAN_BFIN) &bfin_can0_device, #endif -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) &bfin_nand_device, #endif -#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SDH_BFIN) &bfin_sdh_device, #endif -#if defined(CONFIG_SPI_BFIN6XX) || defined(CONFIG_SPI_BFIN6XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_ADI_V3) &bf60x_spi_master0, &bf60x_spi_master1, #endif -#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) +#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY) &bfin_rotary_device, #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi0_device, #if !defined(CONFIG_BF542) &i2c_bfin_twi1_device, @@ -1261,45 +2007,83 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_crc0_device, &bfin_crc1_device, #endif +#if defined(CONFIG_CRYPTO_DEV_BFIN_CRC) + &bfin_crypto_crc_device, +#endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &ezkit_flash_device, #endif -#if defined(CONFIG_SND_BF6XX_I2S) || defined(CONFIG_SND_BF6XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) &bfin_i2s_pcm, #endif -#if defined(CONFIG_SND_BF6XX_SOC_I2S) || \ - defined(CONFIG_SND_BF6XX_SOC_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF6XX_SOC_I2S) &bfin_i2s, #endif -#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61) || \ - defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) + &bfin_ad1836_machine, +#endif +#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61) &adau1761_device, #endif -#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \ - || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE) &bfin_capture_device, #endif +#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_DISPLAY) + &bfin_display_device, +#endif + +}; + +/* Pin control settings */ +static struct pinctrl_map __initdata bfin_pinmux_map[] = { + /* per-device maps */ + PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.0", "pinctrl-adi2.0", NULL, "uart0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.1", "pinctrl-adi2.0", NULL, "uart1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.0", "pinctrl-adi2.0", NULL, "uart0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.1", "pinctrl-adi2.0", NULL, "uart1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-sdh.0", "pinctrl-adi2.0", NULL, "rsi0"), + PIN_MAP_MUX_GROUP_DEFAULT("stmmaceth.0", "pinctrl-adi2.0", NULL, "eth0"), + PIN_MAP_MUX_GROUP_DEFAULT("adi-spi3.0", "pinctrl-adi2.0", NULL, "spi0"), + PIN_MAP_MUX_GROUP_DEFAULT("adi-spi3.1", "pinctrl-adi2.0", NULL, "spi1"), + PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.0", "pinctrl-adi2.0", NULL, "twi0"), + PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.1", "pinctrl-adi2.0", NULL, "twi1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-rotary", "pinctrl-adi2.0", NULL, "rotary"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_can.0", "pinctrl-adi2.0", NULL, "can0"), + PIN_MAP_MUX_GROUP_DEFAULT("physmap-flash.0", "pinctrl-adi2.0", NULL, "smc0"), + PIN_MAP_MUX_GROUP_DEFAULT("bf609_nl8048.2", "pinctrl-adi2.0", "ppi2_16bgrp", "ppi2"), + PIN_MAP_MUX_GROUP("bfin_display.0", "8bit", "pinctrl-adi2.0", "ppi2_8bgrp", "ppi2"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_display.0", "pinctrl-adi2.0", "ppi2_16bgrp", "ppi2"), + PIN_MAP_MUX_GROUP("bfin_display.0", "16bit", "pinctrl-adi2.0", "ppi2_16bgrp", "ppi2"), + PIN_MAP_MUX_GROUP("bfin_capture.0", "8bit", "pinctrl-adi2.0", "ppi0_8bgrp", "ppi0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin_capture.0", "pinctrl-adi2.0", "ppi0_16bgrp", "ppi0"), + PIN_MAP_MUX_GROUP("bfin_capture.0", "16bit", "pinctrl-adi2.0", "ppi0_16bgrp", "ppi0"), + PIN_MAP_MUX_GROUP("bfin_capture.0", "24bit", "pinctrl-adi2.0", "ppi0_24bgrp", "ppi0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.0", "pinctrl-adi2.0", NULL, "sport0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.0", "pinctrl-adi2.0", NULL, "sport0"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.1", "pinctrl-adi2.0", NULL, "sport1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.1", "pinctrl-adi2.0", NULL, "sport1"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.2", "pinctrl-adi2.0", NULL, "sport2"), + PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.2", "pinctrl-adi2.0", NULL, "sport2"), }; static int __init ezkit_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); + /* Initialize pinmuxing */ + pinctrl_register_mappings(bfin_pinmux_map, + ARRAY_SIZE(bfin_pinmux_map)); + i2c_register_board_info(0, bfin_i2c_board_info0, ARRAY_SIZE(bfin_i2c_board_info0)); i2c_register_board_info(1, bfin_i2c_board_info1, ARRAY_SIZE(bfin_i2c_board_info1)); -#if defined(CONFIG_STMMAC_ETH) || defined(CONFIG_STMMAC_ETH_MODULE) - if (!peripheral_request_list(pins, "emac0")) - printk(KERN_ERR "%s(): request emac pins failed\n", __func__); -#endif - platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); @@ -1318,18 +2102,6 @@ static struct platform_device *ezkit_early_devices[] __initdata = { &bfin_uart1_device, #endif #endif - -#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) -#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART - &bfin_sport0_uart_device, -#endif -#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART - &bfin_sport1_uart_device, -#endif -#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART - &bfin_sport2_uart_device, -#endif -#endif }; void __init native_machine_early_platform_add_devices(void) |