aboutsummaryrefslogtreecommitdiff
path: root/arch/blackfin/mach-bf561
diff options
context:
space:
mode:
Diffstat (limited to 'arch/blackfin/mach-bf561')
-rw-r--r--arch/blackfin/mach-bf561/Kconfig222
-rw-r--r--arch/blackfin/mach-bf561/Makefile9
-rw-r--r--arch/blackfin/mach-bf561/boards/Makefile7
-rw-r--r--arch/blackfin/mach-bf561/boards/cm_bf561.c289
-rw-r--r--arch/blackfin/mach-bf561/boards/ezkit.c147
-rw-r--r--arch/blackfin/mach-bf561/boards/generic_board.c82
-rw-r--r--arch/blackfin/mach-bf561/coreb.c402
-rw-r--r--arch/blackfin/mach-bf561/head.S512
-rw-r--r--arch/blackfin/mach-bf561/ints-priority.c108
9 files changed, 1778 insertions, 0 deletions
diff --git a/arch/blackfin/mach-bf561/Kconfig b/arch/blackfin/mach-bf561/Kconfig
new file mode 100644
index 00000000000..0a17c4cf005
--- /dev/null
+++ b/arch/blackfin/mach-bf561/Kconfig
@@ -0,0 +1,222 @@
+if BF561
+
+menu "BF561 Specific Configuration"
+
+comment "Core B Support"
+
+menu "Core B Support"
+
+config BF561_COREB
+ bool "Enable Core B support"
+ default y
+
+config BF561_COREB_RESET
+ bool "Enable Core B reset support"
+ default n
+ help
+ This requires code in the application that is loaded
+ into Core B. In order to reset, the application needs
+ to install an interrupt handler for Supplemental
+ Interrupt 0, that sets RETI to 0xff600000 and writes
+ bit 11 of SICB_SYSCR when bit 5 of SICA_SYSCR is 0.
+ This causes Core B to stall when Supplemental Interrupt
+ 0 is set, and will reset PC to 0xff600000 when
+ COREB_SRAM_INIT is cleared.
+
+endmenu
+
+comment "Interrupt Priority Assignment"
+
+menu "Priority"
+
+config IRQ_PLL_WAKEUP
+ int "PLL Wakeup Interrupt"
+ default 7
+config IRQ_DMA1_ERROR
+ int "DMA1 Error (generic)"
+ default 7
+config IRQ_DMA2_ERROR
+ int "DMA2 Error (generic)"
+ default 7
+config IRQ_IMDMA_ERROR
+ int "IMDMA Error (generic)"
+ default 7
+config IRQ_PPI0_ERROR
+ int "PPI0 Error Interrupt"
+ default 7
+config IRQ_PPI1_ERROR
+ int "PPI1 Error Interrupt"
+ default 7
+config IRQ_SPORT0_ERROR
+ int "SPORT0 Error Interrupt"
+ default 7
+config IRQ_SPORT1_ERROR
+ int "SPORT1 Error Interrupt"
+ default 7
+config IRQ_SPI_ERROR
+ int "SPI Error Interrupt"
+ default 7
+config IRQ_UART_ERROR
+ int "UART Error Interrupt"
+ default 7
+config IRQ_RESERVED_ERROR
+ int "Reserved Interrupt"
+ default 7
+config IRQ_DMA1_0
+ int "DMA1 0 Interrupt(PPI1)"
+ default 8
+config IRQ_DMA1_1
+ int "DMA1 1 Interrupt(PPI2)"
+ default 8
+config IRQ_DMA1_2
+ int "DMA1 2 Interrupt"
+ default 8
+config IRQ_DMA1_3
+ int "DMA1 3 Interrupt"
+ default 8
+config IRQ_DMA1_4
+ int "DMA1 4 Interrupt"
+ default 8
+config IRQ_DMA1_5
+ int "DMA1 5 Interrupt"
+ default 8
+config IRQ_DMA1_6
+ int "DMA1 6 Interrupt"
+ default 8
+config IRQ_DMA1_7
+ int "DMA1 7 Interrupt"
+ default 8
+config IRQ_DMA1_8
+ int "DMA1 8 Interrupt"
+ default 8
+config IRQ_DMA1_9
+ int "DMA1 9 Interrupt"
+ default 8
+config IRQ_DMA1_10
+ int "DMA1 10 Interrupt"
+ default 8
+config IRQ_DMA1_11
+ int "DMA1 11 Interrupt"
+ default 8
+config IRQ_DMA2_0
+ int "DMA2 0 (SPORT0 RX)"
+ default 9
+config IRQ_DMA2_1
+ int "DMA2 1 (SPORT0 TX)"
+ default 9
+config IRQ_DMA2_2
+ int "DMA2 2 (SPORT1 RX)"
+ default 9
+config IRQ_DMA2_3
+ int "DMA2 3 (SPORT2 TX)"
+ default 9
+config IRQ_DMA2_4
+ int "DMA2 4 (SPI)"
+ default 9
+config IRQ_DMA2_5
+ int "DMA2 5 (UART RX)"
+ default 9
+config IRQ_DMA2_6
+ int "DMA2 6 (UART TX)"
+ default 9
+config IRQ_DMA2_7
+ int "DMA2 7 Interrupt"
+ default 9
+config IRQ_DMA2_8
+ int "DMA2 8 Interrupt"
+ default 9
+config IRQ_DMA2_9
+ int "DMA2 9 Interrupt"
+ default 9
+config IRQ_DMA2_10
+ int "DMA2 10 Interrupt"
+ default 9
+config IRQ_DMA2_11
+ int "DMA2 11 Interrupt"
+ default 9
+config IRQ_TIMER0
+ int "TIMER 0 Interrupt"
+ default 10
+config IRQ_TIMER1
+ int "TIMER 1 Interrupt"
+ default 10
+config IRQ_TIMER2
+ int "TIMER 2 Interrupt"
+ default 10
+config IRQ_TIMER3
+ int "TIMER 3 Interrupt"
+ default 10
+config IRQ_TIMER4
+ int "TIMER 4 Interrupt"
+ default 10
+config IRQ_TIMER5
+ int "TIMER 5 Interrupt"
+ default 10
+config IRQ_TIMER6
+ int "TIMER 6 Interrupt"
+ default 10
+config IRQ_TIMER7
+ int "TIMER 7 Interrupt"
+ default 10
+config IRQ_TIMER8
+ int "TIMER 8 Interrupt"
+ default 10
+config IRQ_TIMER9
+ int "TIMER 9 Interrupt"
+ default 10
+config IRQ_TIMER10
+ int "TIMER 10 Interrupt"
+ default 10
+config IRQ_TIMER11
+ int "TIMER 11 Interrupt"
+ default 10
+config IRQ_PROG0_INTA
+ int "Programmable Flags0 A (8)"
+ default 11
+config IRQ_PROG0_INTB
+ int "Programmable Flags0 B (8)"
+ default 11
+config IRQ_PROG1_INTA
+ int "Programmable Flags1 A (8)"
+ default 11
+config IRQ_PROG1_INTB
+ int "Programmable Flags1 B (8)"
+ default 11
+config IRQ_PROG2_INTA
+ int "Programmable Flags2 A (8)"
+ default 11
+config IRQ_PROG2_INTB
+ int "Programmable Flags2 B (8)"
+ default 11
+config IRQ_DMA1_WRRD0
+ int "MDMA1 0 write/read INT"
+ default 8
+config IRQ_DMA1_WRRD1
+ int "MDMA1 1 write/read INT"
+ default 8
+config IRQ_DMA2_WRRD0
+ int "MDMA2 0 write/read INT"
+ default 9
+config IRQ_DMA2_WRRD1
+ int "MDMA2 1 write/read INT"
+ default 9
+config IRQ_IMDMA_WRRD0
+ int "IMDMA 0 write/read INT"
+ default 12
+config IRQ_IMDMA_WRRD1
+ int "IMDMA 1 write/read INT"
+ default 12
+config IRQ_WDTIMER
+ int "Watch Dog Timer"
+ default 13
+
+ help
+ Enter the priority numbers between 7-13 ONLY. Others are Reserved.
+ This applies to all the above. It is not recommended to assign the
+ highest priority number 7 to UART or any other device.
+
+endmenu
+
+endmenu
+
+endif
diff --git a/arch/blackfin/mach-bf561/Makefile b/arch/blackfin/mach-bf561/Makefile
new file mode 100644
index 00000000000..57f475a5516
--- /dev/null
+++ b/arch/blackfin/mach-bf561/Makefile
@@ -0,0 +1,9 @@
+#
+# arch/blackfin/mach-bf561/Makefile
+#
+
+extra-y := head.o
+
+obj-y := ints-priority.o
+
+obj-$(CONFIG_BF561_COREB) += coreb.o
diff --git a/arch/blackfin/mach-bf561/boards/Makefile b/arch/blackfin/mach-bf561/boards/Makefile
new file mode 100644
index 00000000000..886edc739ab
--- /dev/null
+++ b/arch/blackfin/mach-bf561/boards/Makefile
@@ -0,0 +1,7 @@
+#
+# arch/blackfin/mach-bf561/boards/Makefile
+#
+
+obj-$(CONFIG_GENERIC_BOARD) += generic_board.o
+obj-$(CONFIG_BFIN561_EZKIT) += ezkit.o
+obj-$(CONFIG_BFIN561_BLUETECHNIX_CM) += cm_bf561.o
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
new file mode 100644
index 00000000000..6824e956d15
--- /dev/null
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -0,0 +1,289 @@
+/*
+ * File: arch/blackfin/mach-bf533/boards/cm_bf561.c
+ * Based on: arch/blackfin/mach-bf533/boards/ezkit.c
+ * Author: Aidan Williams <aidan@nicta.com.au> Copright 2005
+ *
+ * Created: 2006
+ * Description: Board description file
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/usb_isp1362.h>
+#include <asm/irq.h>
+#include <asm/bfin5xx_spi.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+char *bfin_board_name = "Bluetechnix CM BF561";
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI perpherals info goes here */
+
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+ {
+ .name = "bootloader",
+ .size = 0x00020000,
+ .offset = 0,
+ .mask_flags = MTD_CAP_ROM
+ },{
+ .name = "kernel",
+ .size = 0xe0000,
+ .offset = 0x20000
+ },{
+ .name = "file system",
+ .size = 0x700000,
+ .offset = 0x00100000,
+ }
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+ .name = "m25p80",
+ .parts = bfin_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+ .type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+ .enable_dma = 0, /* use dma transfer with this chip*/
+ .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+ .enable_dma = 1, /* use dma transfer with this chip*/
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+ .enable_dma = 1,
+ .bits_per_word = 8,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+ {
+ /* the modalias must be the same as spi device driver name */
+ .modalias = "m25p80", /* Name of spi_driver for this device */
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1, /* Framework bus number */
+ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+ .platform_data = &bfin_spi_flash_data,
+ .controller_data = &spi_flash_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+ {
+ .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1, /* Framework bus number */
+ .chip_select = 1, /* Framework chip select. */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .controller_data = &spi_adc_chip_info,
+ },
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+ {
+ .modalias = "ad1836-spi",
+ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+ .controller_data = &ad1836_spi_chip_info,
+ },
+#endif
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+ {
+ .modalias = "ad9960-spi",
+ .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 1,
+ .controller_data = &ad9960_spi_chip_info,
+ },
+#endif
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+ {
+ .modalias = "spi_mmc",
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = CONFIG_SPI_MMC_CS_CHAN,
+ .platform_data = NULL,
+ .controller_data = &spi_mmc_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master spi_bfin_master_info = {
+ .num_chipselect = 8,
+ .enable_dma = 1, /* master has the ability to do dma transfer */
+};
+
+static struct platform_device spi_bfin_master_device = {
+ .name = "bfin-spi-master",
+ .id = 1, /* Bus number */
+ .dev = {
+ .platform_data = &spi_bfin_master_info, /* Passed to driver */
+ },
+};
+#endif /* spi master and devices */
+
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+
+static struct resource smc91x_resources[] = {
+ {
+ .name = "smc91x-regs",
+ .start = 0x28000300,
+ .end = 0x28000300 + 16,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PF0,
+ .end = IRQ_PF0,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+static struct resource isp1362_hcd_resources[] = {
+ {
+ .start = 0x24008000,
+ .end = 0x24008000,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = 0x24008004,
+ .end = 0x24008004,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PF47,
+ .end = IRQ_PF47,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+ .sel15Kres = 1,
+ .clknotstop = 0,
+ .oc_enable = 0,
+ .int_act_high = 0,
+ .int_edge_triggered = 0,
+ .remote_wakeup_connected = 0,
+ .no_power_switching = 1,
+ .power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+ .name = "isp1362-hcd",
+ .id = 0,
+ .dev = {
+ .platform_data = &isp1362_priv,
+ },
+ .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+ .resource = isp1362_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device bfin_uart_device = {
+ .name = "bfin-uart",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_uart_resources),
+ .resource = bfin_uart_resources,
+};
+#endif
+
+static struct platform_device *cm_bf561_devices[] __initdata = {
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+ &bfin_uart_device,
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+ &isp1362_hcd_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+ &smc91x_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ &spi_bfin_master_device,
+#endif
+
+};
+
+static int __init cm_bf561_init(void)
+{
+ printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+ platform_add_devices(cm_bf561_devices, ARRAY_SIZE(cm_bf561_devices));
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+#endif
+ return 0;
+}
+
+arch_initcall(cm_bf561_init);
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
new file mode 100644
index 00000000000..14eb4f9a68e
--- /dev/null
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -0,0 +1,147 @@
+/*
+ * File: arch/blackfin/mach-bf561/ezkit.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <asm/irq.h>
+#include <asm/bfin5xx_spi.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+char *bfin_board_name = "ADDS-BF561-EZKIT";
+
+/*
+ * USB-LAN EzExtender board
+ * Driver needs to know address, irq and flag pin.
+ */
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+ {
+ .name = "smc91x-regs",
+ .start = 0x2C010300,
+ .end = 0x2C010300 + 16,
+ .flags = IORESOURCE_MEM,
+ },{
+
+ .start = IRQ_PF9,
+ .end = IRQ_PF9,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device bfin_uart_device = {
+ .name = "bfin-uart",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_uart_resources),
+ .resource = bfin_uart_resources,
+};
+#endif
+
+#ifdef CONFIG_SPI_BFIN
+#if defined(CONFIG_SND_BLACKFIN_AD1836) \
+ || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+#endif
+
+/* SPI controller data */
+static struct bfin5xx_spi_master spi_bfin_master_info = {
+ .num_chipselect = 8,
+ .enable_dma = 1, /* master has the ability to do dma transfer */
+};
+
+static struct platform_device spi_bfin_master_device = {
+ .name = "bfin-spi-master",
+ .id = 1, /* Bus number */
+ .dev = {
+ .platform_data = &spi_bfin_master_info, /* Passed to driver */
+ },
+};
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_SND_BLACKFIN_AD1836) \
+ || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+ {
+ .modalias = "ad1836-spi",
+ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+ .controller_data = &ad1836_spi_chip_info,
+ },
+#endif
+};
+
+static struct platform_device *ezkit_devices[] __initdata = {
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+ &smc91x_device,
+#endif
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ &spi_bfin_master_device,
+#endif
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+ &bfin_uart_device,
+#endif
+};
+
+static int __init ezkit_init(void)
+{
+ int ret;
+
+ printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+ ret = platform_add_devices(ezkit_devices,
+ ARRAY_SIZE(ezkit_devices));
+ if (ret < 0)
+ return ret;
+ return spi_register_board_info(bfin_spi_board_info,
+ ARRAY_SIZE(bfin_spi_board_info));
+}
+
+arch_initcall(ezkit_init);
diff --git a/arch/blackfin/mach-bf561/boards/generic_board.c b/arch/blackfin/mach-bf561/boards/generic_board.c
new file mode 100644
index 00000000000..585ecdd2f6a
--- /dev/null
+++ b/arch/blackfin/mach-bf561/boards/generic_board.c
@@ -0,0 +1,82 @@
+/*
+ * File: arch/blackfin/mach-bf561/generic_board.c
+ * Based on: arch/blackfin/mach-bf533/ezkit.c
+ * Author: Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2005 National ICT Australia (NICTA)
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <asm/irq.h>
+
+char *bfin_board_name = "UNKNOWN BOARD";
+
+/*
+ * Driver needs to know address, irq and flag pin.
+ */
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+ {
+ .start = 0x2C010300,
+ .end = 0x2C010300 + 16,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PROG_INTB,
+ .end = IRQ_PROG_INTB,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },{
+ /*
+ * denotes the flag pin and is used directly if
+ * CONFIG_IRQCHIP_DEMUX_GPIO is defined.
+ */
+ .start = IRQ_PF9,
+ .end = IRQ_PF9,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+#endif
+
+static struct platform_device *generic_board_devices[] __initdata = {
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+ &smc91x_device,
+#endif
+};
+
+static int __init generic_board_init(void)
+{
+ printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+ return platform_add_devices(generic_board_devices,
+ ARRAY_SIZE(generic_board_devices));
+}
+
+arch_initcall(generic_board_init);
diff --git a/arch/blackfin/mach-bf561/coreb.c b/arch/blackfin/mach-bf561/coreb.c
new file mode 100644
index 00000000000..b28582fe083
--- /dev/null
+++ b/arch/blackfin/mach-bf561/coreb.c
@@ -0,0 +1,402 @@
+/*
+ * File: arch/blackfin/mach-bf561/coreb.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: Handle CoreB on a BF561
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/mm.h>
+#include <linux/miscdevice.h>
+#include <linux/device.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <asm/dma.h>
+#include <asm/uaccess.h>
+
+#define MODULE_VER "v0.1"
+
+static spinlock_t coreb_lock;
+static wait_queue_head_t coreb_dma_wait;
+
+#define COREB_IS_OPEN 0x00000001
+#define COREB_IS_RUNNING 0x00000010
+
+#define CMD_COREB_INDEX 1
+#define CMD_COREB_START 2
+#define CMD_COREB_STOP 3
+#define CMD_COREB_RESET 4
+
+#define COREB_MINOR 229
+
+static unsigned long coreb_status = 0;
+static unsigned long coreb_base = 0xff600000;
+static unsigned long coreb_size = 0x4000;
+int coreb_dma_done;
+
+static loff_t coreb_lseek(struct file *file, loff_t offset, int origin);
+static ssize_t coreb_read(struct file *file, char *buf, size_t count,
+ loff_t * ppos);
+static ssize_t coreb_write(struct file *file, const char *buf, size_t count,
+ loff_t * ppos);
+static int coreb_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
+ unsigned long arg);
+static int coreb_open(struct inode *inode, struct file *file);
+static int coreb_release(struct inode *inode, struct file *file);
+
+static irqreturn_t coreb_dma_interrupt(int irq, void *dev_id)
+{
+ clear_dma_irqstat(CH_MEM_STREAM2_DEST);
+ coreb_dma_done = 1;
+ wake_up_interruptible(&coreb_dma_wait);
+ return IRQ_HANDLED;
+}
+
+static ssize_t coreb_write(struct file *file, const char *buf, size_t count,
+ loff_t * ppos)
+{
+ unsigned long p = *ppos;
+ ssize_t wrote = 0;
+
+ if (p + count > coreb_size)
+ return -EFAULT;
+
+ while (count > 0) {
+ int len = count;
+
+ if (len > PAGE_SIZE)
+ len = PAGE_SIZE;
+
+ coreb_dma_done = 0;
+
+ /* Source Channel */
+ set_dma_start_addr(CH_MEM_STREAM2_SRC, (unsigned long)buf);
+ set_dma_x_count(CH_MEM_STREAM2_SRC, len);
+ set_dma_x_modify(CH_MEM_STREAM2_SRC, sizeof(char));
+ set_dma_config(CH_MEM_STREAM2_SRC, RESTART);
+ /* Destination Channel */
+ set_dma_start_addr(CH_MEM_STREAM2_DEST, coreb_base + p);
+ set_dma_x_count(CH_MEM_STREAM2_DEST, len);
+ set_dma_x_modify(CH_MEM_STREAM2_DEST, sizeof(char));
+ set_dma_config(CH_MEM_STREAM2_DEST, WNR | RESTART | DI_EN);
+
+ enable_dma(CH_MEM_STREAM2_SRC);
+ enable_dma(CH_MEM_STREAM2_DEST);
+
+ wait_event_interruptible(coreb_dma_wait, coreb_dma_done);
+
+ disable_dma(CH_MEM_STREAM2_SRC);
+ disable_dma(CH_MEM_STREAM2_DEST);
+
+ count -= len;
+ wrote += len;
+ buf += len;
+ p += len;
+ }
+ *ppos = p;
+ return wrote;
+}
+
+static ssize_t coreb_read(struct file *file, char *buf, size_t count,
+ loff_t * ppos)
+{
+ unsigned long p = *ppos;
+ ssize_t read = 0;
+
+ if ((p + count) > coreb_size)
+ return -EFAULT;
+
+ while (count > 0) {
+ int len = count;
+
+ if (len > PAGE_SIZE)
+ len = PAGE_SIZE;
+
+ coreb_dma_done = 0;
+
+ /* Source Channel */
+ set_dma_start_addr(CH_MEM_STREAM2_SRC, coreb_base + p);
+ set_dma_x_count(CH_MEM_STREAM2_SRC, len);
+ set_dma_x_modify(CH_MEM_STREAM2_SRC, sizeof(char));
+ set_dma_config(CH_MEM_STREAM2_SRC, RESTART);
+ /* Destination Channel */
+ set_dma_start_addr(CH_MEM_STREAM2_DEST, (unsigned long)buf);
+ set_dma_x_count(CH_MEM_STREAM2_DEST, len);
+ set_dma_x_modify(CH_MEM_STREAM2_DEST, sizeof(char));
+ set_dma_config(CH_MEM_STREAM2_DEST, WNR | RESTART | DI_EN);
+
+ enable_dma(CH_MEM_STREAM2_SRC);
+ enable_dma(CH_MEM_STREAM2_DEST);
+
+ wait_event_interruptible(coreb_dma_wait, coreb_dma_done);
+
+ disable_dma(CH_MEM_STREAM2_SRC);
+ disable_dma(CH_MEM_STREAM2_DEST);
+
+ count -= len;
+ read += len;
+ buf += len;
+ p += len;
+ }
+
+ return read;
+}
+
+static loff_t coreb_lseek(struct file *file, loff_t offset, int origin)
+{
+ loff_t ret;
+
+ mutex_lock(&file->f_dentry->d_inode->i_mutex);
+
+ switch (origin) {
+ case 0 /* SEEK_SET */ :
+ if (offset < coreb_size) {
+ file->f_pos = offset;
+ ret = file->f_pos;
+ } else
+ ret = -EINVAL;
+ break;
+ case 1 /* SEEK_CUR */ :
+ if ((offset + file->f_pos) < coreb_size) {
+ file->f_pos += offset;
+ ret = file->f_pos;
+ } else
+ ret = -EINVAL;
+ default:
+ ret = -EINVAL;
+ }
+ mutex_unlock(&file->f_dentry->d_inode->i_mutex);
+ return ret;
+}
+
+static int coreb_open(struct inode *inode, struct file *file)
+{
+ spin_lock_irq(&coreb_lock);
+
+ if (coreb_status & COREB_IS_OPEN)
+ goto out_busy;
+
+ coreb_status |= COREB_IS_OPEN;
+
+ spin_unlock_irq(&coreb_lock);
+ return 0;
+
+ out_busy:
+ spin_unlock_irq(&coreb_lock);
+ return -EBUSY;
+}
+
+static int coreb_release(struct inode *inode, struct file *file)
+{
+ spin_lock_irq(&coreb_lock);
+ coreb_status &= ~COREB_IS_OPEN;
+ spin_unlock_irq(&coreb_lock);
+ return 0;
+}
+
+static int coreb_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ int retval = 0;
+ int coreb_index = 0;
+
+ switch (cmd) {
+ case CMD_COREB_INDEX:
+ if (copy_from_user(&coreb_index, (int *)arg, sizeof(int))) {
+ retval = -EFAULT;
+ break;
+ }
+
+ spin_lock_irq(&coreb_lock);
+ switch (coreb_index) {
+ case 0:
+ coreb_base = 0xff600000;
+ coreb_size = 0x4000;
+ break;
+ case 1:
+ coreb_base = 0xff610000;
+ coreb_size = 0x4000;
+ break;
+ case 2:
+ coreb_base = 0xff500000;
+ coreb_size = 0x8000;
+ break;
+ case 3:
+ coreb_base = 0xff400000;
+ coreb_size = 0x8000;
+ break;
+ default:
+ retval = -EINVAL;
+ break;
+ }
+ spin_unlock_irq(&coreb_lock);
+
+ mutex_lock(&file->f_dentry->d_inode->i_mutex);
+ file->f_pos = 0;
+ mutex_unlock(&file->f_dentry->d_inode->i_mutex);
+ break;
+ case CMD_COREB_START:
+ spin_lock_irq(&coreb_lock);
+ if (coreb_status & COREB_IS_RUNNING) {
+ retval = -EBUSY;
+ break;
+ }
+ printk(KERN_INFO "Starting Core B\n");
+ coreb_status |= COREB_IS_RUNNING;
+ bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() & ~0x0020);
+ SSYNC();
+ spin_lock_irq(&coreb_lock);
+ break;
+#if defined(CONFIG_BF561_COREB_RESET)
+ case CMD_COREB_STOP:
+ spin_lock_irq(&coreb_lock);
+ printk(KERN_INFO "Stopping Core B\n");
+ bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() | 0x0020);
+ bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | 0x0080);
+ coreb_status &= ~COREB_IS_RUNNING;
+ spin_lock_irq(&coreb_lock);
+ break;
+ case CMD_COREB_RESET:
+ printk(KERN_INFO "Resetting Core B\n");
+ bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | 0x0080);
+ break;
+#endif
+ }
+
+ return retval;
+}
+
+static struct file_operations coreb_fops = {
+ .owner = THIS_MODULE,
+ .llseek = coreb_lseek,
+ .read = coreb_read,
+ .write = coreb_write,
+ .ioctl = coreb_ioctl,
+ .open = coreb_open,
+ .release = coreb_release
+};
+
+static struct miscdevice coreb_dev = {
+ COREB_MINOR,
+ "coreb",
+ &coreb_fops
+};
+
+static ssize_t coreb_show_status(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf,
+ "Base Address:\t0x%08lx\n"
+ "Core B is %s\n"
+ "SICA_SYSCR:\t%04x\n"
+ "SICB_SYSCR:\t%04x\n"
+ "\n"
+ "IRQ Status:\tCore A\t\tCore B\n"
+ "ISR0:\t\t%08x\t\t%08x\n"
+ "ISR1:\t\t%08x\t\t%08x\n"
+ "IMASK0:\t\t%08x\t\t%08x\n"
+ "IMASK1:\t\t%08x\t\t%08x\n",
+ coreb_base,
+ coreb_status & COREB_IS_RUNNING ? "running" : "stalled",
+ bfin_read_SICA_SYSCR(), bfin_read_SICB_SYSCR(),
+ bfin_read_SICA_ISR0(), bfin_read_SICB_ISR0(),
+ bfin_read_SICA_ISR1(), bfin_read_SICB_ISR0(),
+ bfin_read_SICA_IMASK0(), bfin_read_SICB_IMASK0(),
+ bfin_read_SICA_IMASK1(), bfin_read_SICB_IMASK1());
+}
+
+static DEVICE_ATTR(coreb_status, S_IRUGO, coreb_show_status, NULL);
+
+int __init bf561_coreb_init(void)
+{
+ init_waitqueue_head(&coreb_dma_wait);
+
+ spin_lock_init(&coreb_lock);
+ /* Request the core memory regions for Core B */
+ if (request_mem_region(0xff600000, 0x4000,
+ "Core B - Instruction SRAM") == NULL)
+ goto exit;
+
+ if (request_mem_region(0xFF610000, 0x4000,
+ "Core B - Instruction SRAM") == NULL)
+ goto release_instruction_a_sram;
+
+ if (request_mem_region(0xFF500000, 0x8000,
+ "Core B - Data Bank B SRAM") == NULL)
+ goto release_instruction_b_sram;
+
+ if (request_mem_region(0xff400000, 0x8000,
+ "Core B - Data Bank A SRAM") == NULL)
+ goto release_data_b_sram;
+
+ if (request_dma(CH_MEM_STREAM2_DEST, "Core B - DMA Destination") < 0)
+ goto release_data_a_sram;
+
+ if (request_dma(CH_MEM_STREAM2_SRC, "Core B - DMA Source") < 0)
+ goto release_dma_dest;
+
+ set_dma_callback(CH_MEM_STREAM2_DEST, coreb_dma_interrupt, NULL);
+
+ misc_register(&coreb_dev);
+
+ if (device_create_file(coreb_dev.this_device, &dev_attr_coreb_status))
+ goto release_dma_src;
+
+ printk(KERN_INFO "BF561 Core B driver %s initialized.\n", MODULE_VER);
+ return 0;
+
+ release_dma_src:
+ free_dma(CH_MEM_STREAM2_SRC);
+ release_dma_dest:
+ free_dma(CH_MEM_STREAM2_DEST);
+ release_data_a_sram:
+ release_mem_region(0xff400000, 0x8000);
+ release_data_b_sram:
+ release_mem_region(0xff500000, 0x8000);
+ release_instruction_b_sram:
+ release_mem_region(0xff610000, 0x4000);
+ release_instruction_a_sram:
+ release_mem_region(0xff600000, 0x4000);
+ exit:
+ return -ENOMEM;
+}
+
+void __exit bf561_coreb_exit(void)
+{
+ device_remove_file(coreb_dev.this_device, &dev_attr_coreb_status);
+ misc_deregister(&coreb_dev);
+
+ release_mem_region(0xff610000, 0x4000);
+ release_mem_region(0xff600000, 0x4000);
+ release_mem_region(0xff500000, 0x8000);
+ release_mem_region(0xff400000, 0x8000);
+
+ free_dma(CH_MEM_STREAM2_DEST);
+ free_dma(CH_MEM_STREAM2_SRC);
+}
+
+module_init(bf561_coreb_init);
+module_exit(bf561_coreb_exit);
+
+MODULE_AUTHOR("Bas Vermeulen <bvermeul@blackstar.xs4all.nl>");
+MODULE_DESCRIPTION("BF561 Core B Support");
diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S
new file mode 100644
index 00000000000..7bca478526b
--- /dev/null
+++ b/arch/blackfin/mach-bf561/head.S
@@ -0,0 +1,512 @@
+/*
+ * File: arch/blackfin/mach-bf561/head.S
+ * Based on: arch/blackfin/mach-bf533/head.S
+ * Author:
+ *
+ * Created:
+ * Description: BF561 startup file
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/linkage.h>
+#include <asm/blackfin.h>
+#if CONFIG_BFIN_KERNEL_CLOCK
+#include <asm/mach/mem_init.h>
+#endif
+
+.global __rambase
+.global __ramstart
+.global __ramend
+.extern ___bss_stop
+.extern ___bss_start
+.extern _bf53x_relocate_l1_mem
+
+#define INITIAL_STACK 0xFFB01000
+
+.text
+
+ENTRY(__start)
+ENTRY(__stext)
+ /* R0: argument of command line string, passed from uboot, save it */
+ R7 = R0;
+ /* Set the SYSCFG register */
+ R0 = 0x36;
+ SYSCFG = R0; /*Enable Cycle Counter and Nesting Of Interrupts(3rd Bit)*/
+ R0 = 0;
+
+ /*Clear Out All the data and pointer Registers*/
+ R1 = R0;
+ R2 = R0;
+ R3 = R0;
+ R4 = R0;
+ R5 = R0;
+ R6 = R0;
+
+ P0 = R0;
+ P1 = R0;
+ P2 = R0;
+ P3 = R0;
+ P4 = R0;
+ P5 = R0;
+
+ LC0 = r0;
+ LC1 = r0;
+ L0 = r0;
+ L1 = r0;
+ L2 = r0;
+ L3 = r0;
+
+ /* Clear Out All the DAG Registers*/
+ B0 = r0;
+ B1 = r0;
+ B2 = r0;
+ B3 = r0;
+
+ I0 = r0;
+ I1 = r0;
+ I2 = r0;
+ I3 = r0;
+
+ M0 = r0;
+ M1 = r0;
+ M2 = r0;
+ M3 = r0;
+
+ /* Turn off the icache */
+ p0.l = (IMEM_CONTROL & 0xFFFF);
+ p0.h = (IMEM_CONTROL >> 16);
+ R1 = [p0];
+ R0 = ~ENICPLB;
+ R0 = R0 & R1;
+
+ /* Anomaly 05000125 */
+#ifdef ANOMALY_05000125
+ CLI R2;
+ SSYNC;
+#endif
+ [p0] = R0;
+ SSYNC;
+#ifdef ANOMALY_05000125
+ STI R2;
+#endif
+
+ /* Turn off the dcache */
+ p0.l = (DMEM_CONTROL & 0xFFFF);
+ p0.h = (DMEM_CONTROL >> 16);
+ R1 = [p0];
+ R0 = ~ENDCPLB;
+ R0 = R0 & R1;
+
+ /* Anomaly 05000125 */
+#ifdef ANOMALY_05000125
+ CLI R2;
+ SSYNC;
+#endif
+ [p0] = R0;
+ SSYNC;
+#ifdef ANOMALY_05000125
+ STI R2;
+#endif
+
+ /* Initialise UART*/
+ p0.h = hi(UART_LCR);
+ p0.l = lo(UART_LCR);
+ r0 = 0x0(Z);
+ w[p0] = r0.L; /* To enable DLL writes */
+ ssync;
+
+ p0.h = hi(UART_DLL);
+ p0.l = lo(UART_DLL);
+ r0 = 0x0(Z);
+ w[p0] = r0.L;
+ ssync;
+
+ p0.h = hi(UART_DLH);
+ p0.l = lo(UART_DLH);
+ r0 = 0x00(Z);
+ w[p0] = r0.L;
+ ssync;
+
+ p0.h = hi(UART_GCTL);
+ p0.l = lo(UART_GCTL);
+ r0 = 0x0(Z);
+ w[p0] = r0.L; /* To enable UART clock */
+ ssync;
+
+ /* Initialize stack pointer */
+ sp.l = lo(INITIAL_STACK);
+ sp.h = hi(INITIAL_STACK);
+ fp = sp;
+ usp = sp;
+
+ /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
+ call _bf53x_relocate_l1_mem;
+#if CONFIG_BFIN_KERNEL_CLOCK
+ call _start_dma_code;
+#endif
+
+ /* Code for initializing Async memory banks */
+
+ p2.h = hi(EBIU_AMBCTL1);
+ p2.l = lo(EBIU_AMBCTL1);
+ r0.h = hi(AMBCTL1VAL);
+ r0.l = lo(AMBCTL1VAL);
+ [p2] = r0;
+ ssync;
+
+ p2.h = hi(EBIU_AMBCTL0);
+ p2.l = lo(EBIU_AMBCTL0);
+ r0.h = hi(AMBCTL0VAL);
+ r0.l = lo(AMBCTL0VAL);
+ [p2] = r0;
+ ssync;
+
+ p2.h = hi(EBIU_AMGCTL);
+ p2.l = lo(EBIU_AMGCTL);
+ r0 = AMGCTLVAL;
+ w[p2] = r0;
+ ssync;
+
+ /* This section keeps the processor in supervisor mode
+ * during kernel boot. Switches to user mode at end of boot.
+ * See page 3-9 of Hardware Reference manual for documentation.
+ */
+
+ /* EVT15 = _real_start */
+
+ p0.l = lo(EVT15);
+ p0.h = hi(EVT15);
+ p1.l = _real_start;
+ p1.h = _real_start;
+ [p0] = p1;
+ csync;
+
+ p0.l = lo(IMASK);
+ p0.h = hi(IMASK);
+ p1.l = IMASK_IVG15;
+ p1.h = 0x0;
+ [p0] = p1;
+ csync;
+
+ raise 15;
+ p0.l = .LWAIT_HERE;
+ p0.h = .LWAIT_HERE;
+ reti = p0;
+#if defined(ANOMALY_05000281)
+ nop; nop; nop;
+#endif
+ rti;
+
+.LWAIT_HERE:
+ jump .LWAIT_HERE;
+
+ENTRY(_real_start)
+ [ -- sp ] = reti;
+ p0.l = lo(WDOGA_CTL);
+ p0.h = hi(WDOGA_CTL);
+ r0 = 0xAD6(z);
+ w[p0] = r0; /* watchdog off for now */
+ ssync;
+
+ /* Code update for BSS size == 0
+ * Zero out the bss region.
+ */
+
+ p1.l = ___bss_start;
+ p1.h = ___bss_start;
+ p2.l = ___bss_stop;
+ p2.h = ___bss_stop;
+ r0 = 0;
+ p2 -= p1;
+ lsetup (.L_clear_bss, .L_clear_bss ) lc0 = p2;
+.L_clear_bss:
+ B[p1++] = r0;
+
+ /* In case there is a NULL pointer reference
+ * Zero out region before stext
+ */
+
+ p1.l = 0x0;
+ p1.h = 0x0;
+ r0.l = __stext;
+ r0.h = __stext;
+ r0 = r0 >> 1;
+ p2 = r0;
+ r0 = 0;
+ lsetup (.L_clear_zero, .L_clear_zero ) lc0 = p2;
+.L_clear_zero:
+ W[p1++] = r0;
+
+/* pass the uboot arguments to the global value command line */
+ R0 = R7;
+ call _cmdline_init;
+
+ p1.l = __rambase;
+ p1.h = __rambase;
+ r0.l = __sdata;
+ r0.h = __sdata;
+ [p1] = r0;
+
+ p1.l = __ramstart;
+ p1.h = __ramstart;
+ p3.l = ___bss_stop;
+ p3.h = ___bss_stop;
+
+ r1 = p3;
+ [p1] = r1;
+
+ /*
+ * load the current thread pointer and stack
+ */
+ r1.l = _init_thread_union;
+ r1.h = _init_thread_union;
+
+ r2.l = 0x2000;
+ r2.h = 0x0000;
+ r1 = r1 + r2;
+ sp = r1;
+ usp = sp;
+ fp = sp;
+ call _start_kernel;
+.L_exit:
+ jump.s .L_exit;
+
+.section .l1.text
+#if CONFIG_BFIN_KERNEL_CLOCK
+ENTRY(_start_dma_code)
+ p0.h = hi(SICA_IWR0);
+ p0.l = lo(SICA_IWR0);
+ r0.l = 0x1;
+ [p0] = r0;
+ SSYNC;
+
+ /*
+ * Set PLL_CTL
+ * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors
+ * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK
+ * - [7] = output delay (add 200ps of delay to mem signals)
+ * - [6] = input delay (add 200ps of input delay to mem signals)
+ * - [5] = PDWN : 1=All Clocks off
+ * - [3] = STOPCK : 1=Core Clock off
+ * - [1] = PLL_OFF : 1=Disable Power to PLL
+ * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL
+ * all other bits set to zero
+ */
+
+ p0.h = hi(PLL_LOCKCNT);
+ p0.l = lo(PLL_LOCKCNT);
+ r0 = 0x300(Z);
+ w[p0] = r0.l;
+ ssync;
+
+ P2.H = hi(EBIU_SDGCTL);
+ P2.L = lo(EBIU_SDGCTL);
+ R0 = [P2];
+ BITSET (R0, 24);
+ [P2] = R0;
+ SSYNC;
+
+ r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */
+ r0 = r0 << 9; /* Shift it over, */
+ r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/
+ r0 = r1 | r0;
+ r1 = PLL_BYPASS; /* Bypass the PLL? */
+ r1 = r1 << 8; /* Shift it over */
+ r0 = r1 | r0; /* add them all together */
+
+ p0.h = hi(PLL_CTL);
+ p0.l = lo(PLL_CTL); /* Load the address */
+ cli r2; /* Disable interrupts */
+ ssync;
+ w[p0] = r0.l; /* Set the value */
+ idle; /* Wait for the PLL to stablize */
+ sti r2; /* Enable interrupts */
+
+.Lcheck_again:
+ p0.h = hi(PLL_STAT);
+ p0.l = lo(PLL_STAT);
+ R0 = W[P0](Z);
+ CC = BITTST(R0,5);
+ if ! CC jump .Lcheck_again;
+
+ /* Configure SCLK & CCLK Dividers */
+ r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
+ p0.h = hi(PLL_DIV);
+ p0.l = lo(PLL_DIV);
+ w[p0] = r0.l;
+ ssync;
+
+ p0.l = lo(EBIU_SDRRC);
+ p0.h = hi(EBIU_SDRRC);
+ r0 = mem_SDRRC;
+ w[p0] = r0.l;
+ ssync;
+
+ p0.l = (EBIU_SDBCTL & 0xFFFF);
+ p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */
+ r0 = mem_SDBCTL;
+ w[p0] = r0.l;
+ ssync;
+
+ P2.H = hi(EBIU_SDGCTL);
+ P2.L = lo(EBIU_SDGCTL);
+ R0 = [P2];
+ BITCLR (R0, 24);
+ p0.h = hi(EBIU_SDSTAT);
+ p0.l = lo(EBIU_SDSTAT);
+ r2.l = w[p0];
+ cc = bittst(r2,3);
+ if !cc jump .Lskip;
+ NOP;
+ BITSET (R0, 23);
+.Lskip:
+ [P2] = R0;
+ SSYNC;
+
+ R0.L = lo(mem_SDGCTL);
+ R0.H = hi(mem_SDGCTL);
+ R1 = [p2];
+ R1 = R1 | R0;
+ [P2] = R1;
+ SSYNC;
+
+ RTS;
+#endif /* CONFIG_BFIN_KERNEL_CLOCK */
+
+ENTRY(_bfin_reset)
+ /* No more interrupts to be handled*/
+ CLI R6;
+ SSYNC;
+
+#if defined(CONFIG_BFIN_SHARED_FLASH_ENET)
+ p0.h = hi(FIO_INEN);
+ p0.l = lo(FIO_INEN);
+ r0.l = ~(PF1 | PF0);
+ w[p0] = r0.l;
+
+ p0.h = hi(FIO_DIR);
+ p0.l = lo(FIO_DIR);
+ r0.l = (PF1 | PF0);
+ w[p0] = r0.l;
+
+ p0.h = hi(FIO_FLAG_C);
+ p0.l = lo(FIO_FLAG_C);
+ r0.l = (PF1 | PF0);
+ w[p0] = r0.l;
+#endif
+
+ /* Clear the bits 13-15 in SWRST if they werent cleared */
+ p0.h = hi(SICA_SWRST);
+ p0.l = lo(SICA_SWRST);
+ csync;
+ r0.l = w[p0];
+
+ /* Clear the IMASK register */
+ p0.h = hi(IMASK);
+ p0.l = lo(IMASK);
+ r0 = 0x0;
+ [p0] = r0;
+
+ /* Clear the ILAT register */
+ p0.h = hi(ILAT);
+ p0.l = lo(ILAT);
+ r0 = [p0];
+ [p0] = r0;
+ SSYNC;
+
+ /* Disable the WDOG TIMER */
+ p0.h = hi(WDOGA_CTL);
+ p0.l = lo(WDOGA_CTL);
+ r0.l = 0xAD6;
+ w[p0] = r0.l;
+ SSYNC;
+
+ /* Clear the sticky bit incase it is already set */
+ p0.h = hi(WDOGA_CTL);
+ p0.l = lo(WDOGA_CTL);
+ r0.l = 0x8AD6;
+ w[p0] = r0.l;
+ SSYNC;
+
+ /* Program the count value */
+ R0.l = 0x100;
+ R0.h = 0x0;
+ P0.h = hi(WDOGA_CNT);
+ P0.l = lo(WDOGA_CNT);
+ [P0] = R0;
+ SSYNC;
+
+ /* Program WDOG_STAT if necessary */
+ P0.h = hi(WDOGA_CTL);
+ P0.l = lo(WDOGA_CTL);
+ R0 = W[P0](Z);
+ CC = BITTST(R0,1);
+ if !CC JUMP .LWRITESTAT;
+ CC = BITTST(R0,2);
+ if !CC JUMP .LWRITESTAT;
+ JUMP .LSKIP_WRITE;
+
+.LWRITESTAT:
+ /* When watch dog timer is enabled,
+ * a write to STAT will load the contents of CNT to STAT
+ */
+ R0 = 0x0000(z);
+ P0.h = hi(WDOGA_STAT);
+ P0.l = lo(WDOGA_STAT)
+ [P0] = R0;
+ SSYNC;
+
+.LSKIP_WRITE:
+ /* Enable the reset event */
+ P0.h = hi(WDOGA_CTL);
+ P0.l = lo(WDOGA_CTL);
+ R0 = W[P0](Z);
+ BITCLR(R0,1);
+ BITCLR(R0,2);
+ W[P0] = R0.L;
+ SSYNC;
+ NOP;
+
+ /* Enable the wdog counter */
+ R0 = W[P0](Z);
+ BITCLR(R0,4);
+ W[P0] = R0.L;
+ SSYNC;
+
+ IDLE;
+
+ RTS;
+
+.data
+
+/*
+ * Set up the usable of RAM stuff. Size of RAM is determined then
+ * an initial stack set up at the end.
+ */
+
+.align 4
+__rambase:
+.long 0
+__ramstart:
+.long 0
+__ramend:
+.long 0
diff --git a/arch/blackfin/mach-bf561/ints-priority.c b/arch/blackfin/mach-bf561/ints-priority.c
new file mode 100644
index 00000000000..89c52ff95b2
--- /dev/null
+++ b/arch/blackfin/mach-bf561/ints-priority.c
@@ -0,0 +1,108 @@
+/*
+ * File: arch/blackfin/mach-bf561/ints-priority.c
+ * Based on: arch/blackfin/mach-bf537/ints-priority.c
+ * Author: Michael Hennerich
+ *
+ * Created:
+ * Description: Set up the interupt priorities
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <asm/blackfin.h>
+#include <asm/irq.h>
+
+void program_IAR(void)
+{
+ /* Program the IAR0 Register with the configured priority */
+ bfin_write_SICA_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
+ ((CONFIG_IRQ_DMA1_ERROR - 7) << IRQ_DMA1_ERROR_POS) |
+ ((CONFIG_IRQ_DMA2_ERROR - 7) << IRQ_DMA2_ERROR_POS) |
+ ((CONFIG_IRQ_IMDMA_ERROR - 7) << IRQ_IMDMA_ERROR_POS) |
+ ((CONFIG_IRQ_PPI0_ERROR - 7) << IRQ_PPI0_ERROR_POS) |
+ ((CONFIG_IRQ_PPI1_ERROR - 7) << IRQ_PPI1_ERROR_POS) |
+ ((CONFIG_IRQ_SPORT0_ERROR - 7) << IRQ_SPORT0_ERROR_POS) |
+ ((CONFIG_IRQ_SPORT1_ERROR - 7) << IRQ_SPORT1_ERROR_POS));
+
+ bfin_write_SICA_IAR1(((CONFIG_IRQ_SPI_ERROR - 7) << IRQ_SPI_ERROR_POS) |
+ ((CONFIG_IRQ_UART_ERROR - 7) << IRQ_UART_ERROR_POS) |
+ ((CONFIG_IRQ_RESERVED_ERROR - 7) << IRQ_RESERVED_ERROR_POS) |
+ ((CONFIG_IRQ_DMA1_0 - 7) << IRQ_DMA1_0_POS) |
+ ((CONFIG_IRQ_DMA1_1 - 7) << IRQ_DMA1_1_POS) |
+ ((CONFIG_IRQ_DMA1_2 - 7) << IRQ_DMA1_2_POS) |
+ ((CONFIG_IRQ_DMA1_3 - 7) << IRQ_DMA1_3_POS) |
+ ((CONFIG_IRQ_DMA1_4 - 7) << IRQ_DMA1_4_POS));
+
+ bfin_write_SICA_IAR2(((CONFIG_IRQ_DMA1_5 - 7) << IRQ_DMA1_5_POS) |
+ ((CONFIG_IRQ_DMA1_6 - 7) << IRQ_DMA1_6_POS) |
+ ((CONFIG_IRQ_DMA1_7 - 7) << IRQ_DMA1_7_POS) |
+ ((CONFIG_IRQ_DMA1_8 - 7) << IRQ_DMA1_8_POS) |
+ ((CONFIG_IRQ_DMA1_9 - 7) << IRQ_DMA1_9_POS) |
+ ((CONFIG_IRQ_DMA1_10 - 7) << IRQ_DMA1_10_POS) |
+ ((CONFIG_IRQ_DMA1_11 - 7) << IRQ_DMA1_11_POS) |
+ ((CONFIG_IRQ_DMA2_0 - 7) << IRQ_DMA2_0_POS));
+
+ bfin_write_SICA_IAR3(((CONFIG_IRQ_DMA2_1 - 7) << IRQ_DMA2_1_POS) |
+ ((CONFIG_IRQ_DMA2_2 - 7) << IRQ_DMA2_2_POS) |
+ ((CONFIG_IRQ_DMA2_3 - 7) << IRQ_DMA2_3_POS) |
+ ((CONFIG_IRQ_DMA2_4 - 7) << IRQ_DMA2_4_POS) |
+ ((CONFIG_IRQ_DMA2_5 - 7) << IRQ_DMA2_5_POS) |
+ ((CONFIG_IRQ_DMA2_6 - 7) << IRQ_DMA2_6_POS) |
+ ((CONFIG_IRQ_DMA2_7 - 7) << IRQ_DMA2_7_POS) |
+ ((CONFIG_IRQ_DMA2_8 - 7) << IRQ_DMA2_8_POS));
+
+ bfin_write_SICA_IAR4(((CONFIG_IRQ_DMA2_9 - 7) << IRQ_DMA2_9_POS) |
+ ((CONFIG_IRQ_DMA2_10 - 7) << IRQ_DMA2_10_POS) |
+ ((CONFIG_IRQ_DMA2_11 - 7) << IRQ_DMA2_11_POS) |
+ ((CONFIG_IRQ_TIMER0 - 7) << IRQ_TIMER0_POS) |
+ ((CONFIG_IRQ_TIMER1 - 7) << IRQ_TIMER1_POS) |
+ ((CONFIG_IRQ_TIMER2 - 7) << IRQ_TIMER2_POS) |
+ ((CONFIG_IRQ_TIMER3 - 7) << IRQ_TIMER3_POS) |
+ ((CONFIG_IRQ_TIMER4 - 7) << IRQ_TIMER4_POS));
+
+ bfin_write_SICA_IAR5(((CONFIG_IRQ_TIMER5 - 7) << IRQ_TIMER5_POS) |
+ ((CONFIG_IRQ_TIMER6 - 7) << IRQ_TIMER6_POS) |
+ ((CONFIG_IRQ_TIMER7 - 7) << IRQ_TIMER7_POS) |
+ ((CONFIG_IRQ_TIMER8 - 7) << IRQ_TIMER8_POS) |
+ ((CONFIG_IRQ_TIMER9 - 7) << IRQ_TIMER9_POS) |
+ ((CONFIG_IRQ_TIMER10 - 7) << IRQ_TIMER10_POS) |
+ ((CONFIG_IRQ_TIMER11 - 7) << IRQ_TIMER11_POS) |
+ ((CONFIG_IRQ_PROG0_INTA - 7) << IRQ_PROG0_INTA_POS));
+
+ bfin_write_SICA_IAR6(((CONFIG_IRQ_PROG0_INTB - 7) << IRQ_PROG0_INTB_POS) |
+ ((CONFIG_IRQ_PROG1_INTA - 7) << IRQ_PROG1_INTA_POS) |
+ ((CONFIG_IRQ_PROG1_INTB - 7) << IRQ_PROG1_INTB_POS) |
+ ((CONFIG_IRQ_PROG2_INTA - 7) << IRQ_PROG2_INTA_POS) |
+ ((CONFIG_IRQ_PROG2_INTB - 7) << IRQ_PROG2_INTB_POS) |
+ ((CONFIG_IRQ_DMA1_WRRD0 - 7) << IRQ_DMA1_WRRD0_POS) |
+ ((CONFIG_IRQ_DMA1_WRRD1 - 7) << IRQ_DMA1_WRRD1_POS) |
+ ((CONFIG_IRQ_DMA2_WRRD0 - 7) << IRQ_DMA2_WRRD0_POS));
+
+ bfin_write_SICA_IAR7(((CONFIG_IRQ_DMA2_WRRD1 - 7) << IRQ_DMA2_WRRD1_POS) |
+ ((CONFIG_IRQ_IMDMA_WRRD0 - 7) << IRQ_IMDMA_WRRD0_POS) |
+ ((CONFIG_IRQ_IMDMA_WRRD1 - 7) << IRQ_IMDMA_WRRD1_POS) |
+ ((CONFIG_IRQ_WDTIMER - 7) << IRQ_WDTIMER_POS) |
+ (0 << IRQ_RESERVED_1_POS) | (0 << IRQ_RESERVED_2_POS) |
+ (0 << IRQ_SUPPLE_0_POS) | (0 << IRQ_SUPPLE_1_POS));
+
+ SSYNC();
+}
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-03 21:48:21 +0000