aboutsummaryrefslogtreecommitdiff
path: root/arch/blackfin/mach-bf561
diff options
context:
space:
mode:
Diffstat (limited to 'arch/blackfin/mach-bf561')
-rw-r--r--arch/blackfin/mach-bf561/atomic.S7
-rw-r--r--arch/blackfin/mach-bf561/boards/acvilon.c32
-rw-r--r--arch/blackfin/mach-bf561/boards/cm_bf561.c57
-rw-r--r--arch/blackfin/mach-bf561/boards/ezkit.c98
-rw-r--r--arch/blackfin/mach-bf561/boards/tepla.c8
-rw-r--r--arch/blackfin/mach-bf561/include/mach/anomaly.h4
-rw-r--r--arch/blackfin/mach-bf561/include/mach/defBF561.h229
-rw-r--r--arch/blackfin/mach-bf561/smp.c13
8 files changed, 233 insertions, 215 deletions
diff --git a/arch/blackfin/mach-bf561/atomic.S b/arch/blackfin/mach-bf561/atomic.S
index 52d6f73fcce..2a08df8e8c4 100644
--- a/arch/blackfin/mach-bf561/atomic.S
+++ b/arch/blackfin/mach-bf561/atomic.S
@@ -72,6 +72,13 @@ ENTRY(_get_core_lock_noflush)
SSYNC(r2);
jump .Lretry_corelock_noflush
.Ldone_corelock_noflush:
+ /*
+ * SMP kgdb runs into dead loop without NOP here, when one core
+ * single steps over get_core_lock_noflush and the other executes
+ * get_core_lock as a slave node.
+ */
+ nop;
+ CSYNC(r2);
rts;
ENDPROC(_get_core_lock_noflush)
diff --git a/arch/blackfin/mach-bf561/boards/acvilon.c b/arch/blackfin/mach-bf561/boards/acvilon.c
index f6ffd6f054c..6ab951534d7 100644
--- a/arch/blackfin/mach-bf561/boards/acvilon.c
+++ b/arch/blackfin/mach-bf561/boards/acvilon.c
@@ -44,6 +44,7 @@
#include <linux/spi/flash.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
+#include <linux/gpio.h>
#include <linux/jiffies.h>
#include <linux/i2c-pca-platform.h>
#include <linux/delay.h>
@@ -60,7 +61,7 @@
*/
const char bfin_board_name[] = "Acvilon board";
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
#include <linux/usb/isp1760.h>
static struct resource bfin_isp1760_resources[] = {
[0] = {
@@ -137,7 +138,7 @@ static struct i2c_board_info acvilon_i2c_devs[] __initdata = {
},
};
-#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PLATRAM)
static struct platdata_mtd_ram mtd_ram_data = {
.mapname = "rootfs(RAM)",
.bankwidth = 4,
@@ -160,7 +161,7 @@ static struct platform_device mtd_ram_device = {
};
#endif
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#if IS_ENABLED(CONFIG_SMSC911X)
#include <linux/smsc911x.h>
static struct resource smsc911x_resources[] = {
{
@@ -194,7 +195,7 @@ static struct platform_device smsc911x_device = {
};
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
@@ -246,9 +247,7 @@ static struct platform_device bfin_uart0_device = {
#endif
#endif
-#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
-
-const char *part_probes[] = { "cmdlinepart", NULL };
+#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM)
static struct mtd_partition bfin_plat_nand_partitions[] = {
{
@@ -289,7 +288,6 @@ static struct platform_nand_data bfin_plat_nand_data = {
.chip = {
.nr_chips = 1,
.chip_delay = 30,
- .part_probe_types = part_probes,
.partitions = bfin_plat_nand_partitions,
.nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions),
},
@@ -326,7 +324,7 @@ static void bfin_plat_nand_init(void)
}
#endif
-#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE)
+#if IS_ENABLED(CONFIG_MTD_DATAFLASH)
static struct mtd_partition bfin_spi_dataflash_partitions[] = {
{
.name = "bootloader",
@@ -372,7 +370,7 @@ static struct bfin5xx_spi_chip data_flash_chip_info = {
};
#endif
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
@@ -411,7 +409,7 @@ static struct platform_device bfin_spi0_device = {
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
@@ -419,7 +417,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.chip_select = 3,
},
#endif
-#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE)
+#if IS_ENABLED(CONFIG_MTD_DATAFLASH)
{ /* DataFlash chip */
.modalias = "mtd_dataflash",
.max_speed_hz = 33250000, /* max spi clock (SCK) speed in HZ */
@@ -475,11 +473,11 @@ static struct platform_device bfin_dpmc = {
static struct platform_device *acvilon_devices[] __initdata = {
&bfin_dpmc,
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
@@ -487,17 +485,17 @@ static struct platform_device *acvilon_devices[] __initdata = {
&bfin_gpios_device,
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#if IS_ENABLED(CONFIG_SMSC911X)
&smsc911x_device,
#endif
&bfin_i2c_pca_device,
-#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM)
&bfin_async_nand_device,
#endif
-#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PLATRAM)
&mtd_ram_device,
#endif
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index d81450f635d..e862f7823e6 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -13,11 +13,12 @@
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
#include <linux/usb/isp1362.h>
#endif
#include <linux/ata_platform.h>
#include <linux/irq.h>
+#include <linux/gpio.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/portmux.h>
@@ -29,10 +30,10 @@
*/
const char bfin_board_name[] = "Bluetechnix CM BF561";
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* all SPI peripherals info goes here */
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
@@ -64,7 +65,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
@@ -77,7 +78,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
{
.modalias = "ad183x",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
@@ -85,7 +86,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.chip_select = 4,
},
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
@@ -134,14 +135,14 @@ static struct platform_device bfin_spi0_device = {
#endif /* spi master and devices */
-#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+#if IS_ENABLED(CONFIG_FB_HITACHI_TX09)
static struct platform_device hitachi_fb_device = {
.name = "hitachi-tx09",
};
#endif
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
@@ -173,7 +174,7 @@ static struct platform_device smc91x_device = {
};
#endif
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#if IS_ENABLED(CONFIG_SMSC911X)
#include <linux/smsc911x.h>
static struct resource smsc911x_resources[] = {
@@ -208,7 +209,7 @@ static struct platform_device smsc911x_device = {
};
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
static struct resource net2272_bfin_resources[] = {
{
.start = 0x24000000,
@@ -229,7 +230,7 @@ static struct platform_device net2272_bfin_device = {
};
#endif
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
static struct resource isp1362_hcd_resources[] = {
{
.start = 0x24008000,
@@ -268,7 +269,7 @@ static struct platform_device isp1362_hcd_device = {
};
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
@@ -319,7 +320,7 @@ static struct platform_device bfin_uart0_device = {
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
@@ -348,7 +349,7 @@ static struct platform_device bfin_sir0_device = {
#endif
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
#define PATA_INT IRQ_PF46
static struct pata_platform_info bfin_pata_platform_data = {
@@ -385,7 +386,7 @@ static struct platform_device bfin_pata_device = {
};
#endif
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
static struct mtd_partition para_partitions[] = {
{
.name = "bootloader(nor)",
@@ -456,54 +457,54 @@ static struct platform_device *cm_bf561_devices[] __initdata = {
&bfin_dpmc,
-#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+#if IS_ENABLED(CONFIG_FB_HITACHI_TX09)
&hitachi_fb_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
&isp1362_hcd_device,
#endif
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#if IS_ENABLED(CONFIG_SMSC911X)
&smsc911x_device,
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
&net2272_bfin_device,
#endif
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
&bfin_pata_device,
#endif
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
&para_flash_device,
#endif
};
static int __init net2272_init(void)
{
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
int ret;
ret = gpio_request(GPIO_PF46, "net2272");
@@ -523,11 +524,11 @@ static int __init cm_bf561_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(cm_bf561_devices, ARRAY_SIZE(cm_bf561_devices));
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN);
#endif
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index 838978808a1..2de71e8c104 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -14,6 +14,7 @@
#include <linux/spi/spi.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
+#include <linux/gpio.h>
#include <linux/delay.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
@@ -25,7 +26,7 @@
*/
const char bfin_board_name[] = "ADI BF561-EZKIT";
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
#include <linux/usb/isp1760.h>
static struct resource bfin_isp1760_resources[] = {
[0] = {
@@ -60,7 +61,7 @@ static struct platform_device bfin_isp1760_device = {
};
#endif
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
#include <linux/usb/isp1362.h>
static struct resource isp1362_hcd_resources[] = {
@@ -101,7 +102,7 @@ static struct platform_device isp1362_hcd_device = {
};
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
static struct resource net2272_bfin_resources[] = {
{
.start = 0x2C000000,
@@ -129,7 +130,7 @@ static struct platform_device net2272_bfin_device = {
* USB-LAN EzExtender board
* Driver needs to know address, irq and flag pin.
*/
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
@@ -163,7 +164,7 @@ static struct platform_device smc91x_device = {
};
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
@@ -214,7 +215,7 @@ static struct platform_device bfin_uart0_device = {
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
@@ -243,7 +244,7 @@ static struct platform_device bfin_sir0_device = {
#endif
#endif
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
static struct mtd_partition ezkit_partitions[] = {
{
.name = "bootloader(nor)",
@@ -291,7 +292,7 @@ static struct platform_device ezkit_flash_device = {
};
#endif
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
@@ -330,8 +331,7 @@ static struct platform_device bfin_spi0_device = {
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
- || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
{
.modalias = "ad183x",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
@@ -341,7 +341,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_3,
},
#endif
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
@@ -351,7 +351,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
#endif
};
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
#include <linux/input.h>
#include <linux/gpio_keys.h>
@@ -375,7 +375,7 @@ static struct platform_device bfin_device_gpiokeys = {
};
#endif
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_I2C_GPIO)
#include <linux/i2c-gpio.h>
static struct i2c_gpio_platform_data i2c_gpio_data = {
@@ -422,8 +422,7 @@ static struct platform_device bfin_dpmc = {
},
};
-#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
- || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
#include <linux/videodev2.h>
#include <media/blackfin/bfin_capture.h>
#include <media/blackfin/ppi.h>
@@ -443,8 +442,7 @@ static const struct ppi_info ppi_info = {
.pin_req = ppi_req,
};
-#if defined(CONFIG_VIDEO_ADV7183) \
- || defined(CONFIG_VIDEO_ADV7183_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_ADV7183)
#include <media/adv7183.h>
static struct v4l2_input adv7183_inputs[] = {
{
@@ -452,18 +450,21 @@ static struct v4l2_input adv7183_inputs[] = {
.name = "Composite",
.type = V4L2_INPUT_TYPE_CAMERA,
.std = V4L2_STD_ALL,
+ .capabilities = V4L2_IN_CAP_STD,
},
{
.index = 1,
.name = "S-Video",
.type = V4L2_INPUT_TYPE_CAMERA,
.std = V4L2_STD_ALL,
+ .capabilities = V4L2_IN_CAP_STD,
},
{
.index = 2,
.name = "Component",
.type = V4L2_INPUT_TYPE_CAMERA,
.std = V4L2_STD_ALL,
+ .capabilities = V4L2_IN_CAP_STD,
},
};
@@ -512,7 +513,7 @@ static struct platform_device bfin_capture_device = {
};
#endif
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
static struct platform_device bfin_i2s = {
.name = "bfin-i2s",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
@@ -520,19 +521,25 @@ static struct platform_device bfin_i2s = {
};
#endif
-#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
-static struct platform_device bfin_tdm = {
- .name = "bfin-tdm",
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
+static struct platform_device bfin_ac97 = {
+ .name = "bfin-ac97",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
/* TODO: add platform data here */
};
#endif
-#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
-static struct platform_device bfin_ac97 = {
- .name = "bfin-ac97",
- .id = CONFIG_SND_BF5XX_SPORT_NUM,
- /* TODO: add platform data here */
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
+static const char * const ad1836_link[] = {
+ "bfin-i2s.0",
+ "spi0.4",
+};
+static struct platform_device bfin_ad1836_machine = {
+ .name = "bfin-snd-ad1836",
+ .id = -1,
+ .dev = {
+ .platform_data = (void *)ad1836_link,
+ },
};
#endif
@@ -540,71 +547,70 @@ static struct platform_device *ezkit_devices[] __initdata = {
&bfin_dpmc,
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
&net2272_bfin_device,
#endif
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
&bfin_isp1760_device,
#endif
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
&bfin_device_gpiokeys,
#endif
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_I2C_GPIO)
&i2c_gpio_device,
#endif
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
&isp1362_hcd_device,
#endif
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
&ezkit_flash_device,
#endif
-#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
- || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
&bfin_capture_device,
#endif
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
&bfin_i2s,
#endif
-#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
- &bfin_tdm,
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
+ &bfin_ac97,
#endif
-#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
- &bfin_ac97,
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
+ &bfin_ad1836_machine,
#endif
};
static int __init net2272_init(void)
{
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
int ret;
ret = gpio_request(GPIO_PF11, "net2272");
@@ -630,12 +636,12 @@ static int __init ezkit_init(void)
if (ret < 0)
return ret;
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() | (1 << 12));
SSYNC();
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() | (1 << 15));
bfin_write_FIO0_FLAG_S(1 << 15);
SSYNC();
diff --git a/arch/blackfin/mach-bf561/boards/tepla.c b/arch/blackfin/mach-bf561/boards/tepla.c
index 1a57bc986aa..f87b8cc0cd4 100644
--- a/arch/blackfin/mach-bf561/boards/tepla.c
+++ b/arch/blackfin/mach-bf561/boards/tepla.c
@@ -42,7 +42,7 @@ static struct platform_device smc91x_device = {
.resource = smc91x_resources,
};
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
@@ -93,7 +93,7 @@ static struct platform_device bfin_uart0_device = {
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
@@ -125,13 +125,13 @@ static struct platform_device bfin_sir0_device = {
static struct platform_device *tepla_devices[] __initdata = {
&smc91x_device,
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h
index 836baeed303..038249c1d0d 100644
--- a/arch/blackfin/mach-bf561/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h
@@ -6,8 +6,7 @@
* DO NOT EDIT THIS FILE
*
* Copyright 2004-2011 Analog Devices Inc.
- * Licensed under the ADI BSD license.
- * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
+ * Licensed under the Clear BSD license.
*/
/* This file should be up to date with:
@@ -349,5 +348,6 @@
#define ANOMALY_05000474 (0)
#define ANOMALY_05000480 (0)
#define ANOMALY_05000485 (0)
+#define ANOMALY_16000030 (0)
#endif
diff --git a/arch/blackfin/mach-bf561/include/mach/defBF561.h b/arch/blackfin/mach-bf561/include/mach/defBF561.h
index 71e805ea74e..9f21f768c63 100644
--- a/arch/blackfin/mach-bf561/include/mach/defBF561.h
+++ b/arch/blackfin/mach-bf561/include/mach/defBF561.h
@@ -1,7 +1,7 @@
/*
* Copyright 2005-2010 Analog Devices Inc.
*
- * Licensed under the ADI BSD license or the GPL-2 (or later)
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
*/
#ifndef _DEF_BF561_H
@@ -479,61 +479,61 @@
#define DMA1_11_PERIPHERAL_MAP 0xFFC01EEC /* DMA1 Channel 11 Peripheral Map Register */
/* Memory DMA1 Controller registers (0xFFC0 1E80-0xFFC0 1FFF) */
-#define MDMA_D2_CONFIG 0xFFC01F08 /*MemDMA1 Stream 0 Destination Configuration */
-#define MDMA_D2_NEXT_DESC_PTR 0xFFC01F00 /*MemDMA1 Stream 0 Destination Next Descriptor Ptr Reg */
-#define MDMA_D2_START_ADDR 0xFFC01F04 /*MemDMA1 Stream 0 Destination Start Address */
-#define MDMA_D2_X_COUNT 0xFFC01F10 /*MemDMA1 Stream 0 Destination Inner-Loop Count */
-#define MDMA_D2_Y_COUNT 0xFFC01F18 /*MemDMA1 Stream 0 Destination Outer-Loop Count */
-#define MDMA_D2_X_MODIFY 0xFFC01F14 /*MemDMA1 Stream 0 Dest Inner-Loop Address-Increment */
-#define MDMA_D2_Y_MODIFY 0xFFC01F1C /*MemDMA1 Stream 0 Dest Outer-Loop Address-Increment */
-#define MDMA_D2_CURR_DESC_PTR 0xFFC01F20 /*MemDMA1 Stream 0 Dest Current Descriptor Ptr reg */
-#define MDMA_D2_CURR_ADDR 0xFFC01F24 /*MemDMA1 Stream 0 Destination Current Address */
-#define MDMA_D2_CURR_X_COUNT 0xFFC01F30 /*MemDMA1 Stream 0 Dest Current Inner-Loop Count */
-#define MDMA_D2_CURR_Y_COUNT 0xFFC01F38 /*MemDMA1 Stream 0 Dest Current Outer-Loop Count */
-#define MDMA_D2_IRQ_STATUS 0xFFC01F28 /*MemDMA1 Stream 0 Destination Interrupt/Status */
-#define MDMA_D2_PERIPHERAL_MAP 0xFFC01F2C /*MemDMA1 Stream 0 Destination Peripheral Map */
-
-#define MDMA_S2_CONFIG 0xFFC01F48 /*MemDMA1 Stream 0 Source Configuration */
-#define MDMA_S2_NEXT_DESC_PTR 0xFFC01F40 /*MemDMA1 Stream 0 Source Next Descriptor Ptr Reg */
-#define MDMA_S2_START_ADDR 0xFFC01F44 /*MemDMA1 Stream 0 Source Start Address */
-#define MDMA_S2_X_COUNT 0xFFC01F50 /*MemDMA1 Stream 0 Source Inner-Loop Count */
-#define MDMA_S2_Y_COUNT 0xFFC01F58 /*MemDMA1 Stream 0 Source Outer-Loop Count */
-#define MDMA_S2_X_MODIFY 0xFFC01F54 /*MemDMA1 Stream 0 Source Inner-Loop Address-Increment */
-#define MDMA_S2_Y_MODIFY 0xFFC01F5C /*MemDMA1 Stream 0 Source Outer-Loop Address-Increment */
-#define MDMA_S2_CURR_DESC_PTR 0xFFC01F60 /*MemDMA1 Stream 0 Source Current Descriptor Ptr reg */
-#define MDMA_S2_CURR_ADDR 0xFFC01F64 /*MemDMA1 Stream 0 Source Current Address */
-#define MDMA_S2_CURR_X_COUNT 0xFFC01F70 /*MemDMA1 Stream 0 Source Current Inner-Loop Count */
-#define MDMA_S2_CURR_Y_COUNT 0xFFC01F78 /*MemDMA1 Stream 0 Source Current Outer-Loop Count */
-#define MDMA_S2_IRQ_STATUS 0xFFC01F68 /*MemDMA1 Stream 0 Source Interrupt/Status */
-#define MDMA_S2_PERIPHERAL_MAP 0xFFC01F6C /*MemDMA1 Stream 0 Source Peripheral Map */
-
-#define MDMA_D3_CONFIG 0xFFC01F88 /*MemDMA1 Stream 1 Destination Configuration */
-#define MDMA_D3_NEXT_DESC_PTR 0xFFC01F80 /*MemDMA1 Stream 1 Destination Next Descriptor Ptr Reg */
-#define MDMA_D3_START_ADDR 0xFFC01F84 /*MemDMA1 Stream 1 Destination Start Address */
-#define MDMA_D3_X_COUNT 0xFFC01F90 /*MemDMA1 Stream 1 Destination Inner-Loop Count */
-#define MDMA_D3_Y_COUNT 0xFFC01F98 /*MemDMA1 Stream 1 Destination Outer-Loop Count */
-#define MDMA_D3_X_MODIFY 0xFFC01F94 /*MemDMA1 Stream 1 Dest Inner-Loop Address-Increment */
-#define MDMA_D3_Y_MODIFY 0xFFC01F9C /*MemDMA1 Stream 1 Dest Outer-Loop Address-Increment */
-#define MDMA_D3_CURR_DESC_PTR 0xFFC01FA0 /*MemDMA1 Stream 1 Dest Current Descriptor Ptr reg */
-#define MDMA_D3_CURR_ADDR 0xFFC01FA4 /*MemDMA1 Stream 1 Dest Current Address */
-#define MDMA_D3_CURR_X_COUNT 0xFFC01FB0 /*MemDMA1 Stream 1 Dest Current Inner-Loop Count */
-#define MDMA_D3_CURR_Y_COUNT 0xFFC01FB8 /*MemDMA1 Stream 1 Dest Current Outer-Loop Count */
-#define MDMA_D3_IRQ_STATUS 0xFFC01FA8 /*MemDMA1 Stream 1 Dest Interrupt/Status */
-#define MDMA_D3_PERIPHERAL_MAP 0xFFC01FAC /*MemDMA1 Stream 1 Dest Peripheral Map */
-
-#define MDMA_S3_CONFIG 0xFFC01FC8 /*MemDMA1 Stream 1 Source Configuration */
-#define MDMA_S3_NEXT_DESC_PTR 0xFFC01FC0 /*MemDMA1 Stream 1 Source Next Descriptor Ptr Reg */
-#define MDMA_S3_START_ADDR 0xFFC01FC4 /*MemDMA1 Stream 1 Source Start Address */
-#define MDMA_S3_X_COUNT 0xFFC01FD0 /*MemDMA1 Stream 1 Source Inner-Loop Count */
-#define MDMA_S3_Y_COUNT 0xFFC01FD8 /*MemDMA1 Stream 1 Source Outer-Loop Count */
-#define MDMA_S3_X_MODIFY 0xFFC01FD4 /*MemDMA1 Stream 1 Source Inner-Loop Address-Increment */
-#define MDMA_S3_Y_MODIFY 0xFFC01FDC /*MemDMA1 Stream 1 Source Outer-Loop Address-Increment */
-#define MDMA_S3_CURR_DESC_PTR 0xFFC01FE0 /*MemDMA1 Stream 1 Source Current Descriptor Ptr reg */
-#define MDMA_S3_CURR_ADDR 0xFFC01FE4 /*MemDMA1 Stream 1 Source Current Address */
-#define MDMA_S3_CURR_X_COUNT 0xFFC01FF0 /*MemDMA1 Stream 1 Source Current Inner-Loop Count */
-#define MDMA_S3_CURR_Y_COUNT 0xFFC01FF8 /*MemDMA1 Stream 1 Source Current Outer-Loop Count */
-#define MDMA_S3_IRQ_STATUS 0xFFC01FE8 /*MemDMA1 Stream 1 Source Interrupt/Status */
-#define MDMA_S3_PERIPHERAL_MAP 0xFFC01FEC /*MemDMA1 Stream 1 Source Peripheral Map */
+#define MDMA_D0_CONFIG 0xFFC01F08 /*MemDMA1 Stream 0 Destination Configuration */
+#define MDMA_D0_NEXT_DESC_PTR 0xFFC01F00 /*MemDMA1 Stream 0 Destination Next Descriptor Ptr Reg */
+#define MDMA_D0_START_ADDR 0xFFC01F04 /*MemDMA1 Stream 0 Destination Start Address */
+#define MDMA_D0_X_COUNT 0xFFC01F10 /*MemDMA1 Stream 0 Destination Inner-Loop Count */
+#define MDMA_D0_Y_COUNT 0xFFC01F18 /*MemDMA1 Stream 0 Destination Outer-Loop Count */
+#define MDMA_D0_X_MODIFY 0xFFC01F14 /*MemDMA1 Stream 0 Dest Inner-Loop Address-Increment */
+#define MDMA_D0_Y_MODIFY 0xFFC01F1C /*MemDMA1 Stream 0 Dest Outer-Loop Address-Increment */
+#define MDMA_D0_CURR_DESC_PTR 0xFFC01F20 /*MemDMA1 Stream 0 Dest Current Descriptor Ptr reg */
+#define MDMA_D0_CURR_ADDR 0xFFC01F24 /*MemDMA1 Stream 0 Destination Current Address */
+#define MDMA_D0_CURR_X_COUNT 0xFFC01F30 /*MemDMA1 Stream 0 Dest Current Inner-Loop Count */
+#define MDMA_D0_CURR_Y_COUNT 0xFFC01F38 /*MemDMA1 Stream 0 Dest Current Outer-Loop Count */
+#define MDMA_D0_IRQ_STATUS 0xFFC01F28 /*MemDMA1 Stream 0 Destination Interrupt/Status */
+#define MDMA_D0_PERIPHERAL_MAP 0xFFC01F2C /*MemDMA1 Stream 0 Destination Peripheral Map */
+
+#define MDMA_S0_CONFIG 0xFFC01F48 /*MemDMA1 Stream 0 Source Configuration */
+#define MDMA_S0_NEXT_DESC_PTR 0xFFC01F40 /*MemDMA1 Stream 0 Source Next Descriptor Ptr Reg */
+#define MDMA_S0_START_ADDR 0xFFC01F44 /*MemDMA1 Stream 0 Source Start Address */
+#define MDMA_S0_X_COUNT 0xFFC01F50 /*MemDMA1 Stream 0 Source Inner-Loop Count */
+#define MDMA_S0_Y_COUNT 0xFFC01F58 /*MemDMA1 Stream 0 Source Outer-Loop Count */
+#define MDMA_S0_X_MODIFY 0xFFC01F54 /*MemDMA1 Stream 0 Source Inner-Loop Address-Increment */
+#define MDMA_S0_Y_MODIFY 0xFFC01F5C /*MemDMA1 Stream 0 Source Outer-Loop Address-Increment */
+#define MDMA_S0_CURR_DESC_PTR 0xFFC01F60 /*MemDMA1 Stream 0 Source Current Descriptor Ptr reg */
+#define MDMA_S0_CURR_ADDR 0xFFC01F64 /*MemDMA1 Stream 0 Source Current Address */
+#define MDMA_S0_CURR_X_COUNT 0xFFC01F70 /*MemDMA1 Stream 0 Source Current Inner-Loop Count */
+#define MDMA_S0_CURR_Y_COUNT 0xFFC01F78 /*MemDMA1 Stream 0 Source Current Outer-Loop Count */
+#define MDMA_S0_IRQ_STATUS 0xFFC01F68 /*MemDMA1 Stream 0 Source Interrupt/Status */
+#define MDMA_S0_PERIPHERAL_MAP 0xFFC01F6C /*MemDMA1 Stream 0 Source Peripheral Map */
+
+#define MDMA_D1_CONFIG 0xFFC01F88 /*MemDMA1 Stream 1 Destination Configuration */
+#define MDMA_D1_NEXT_DESC_PTR 0xFFC01F80 /*MemDMA1 Stream 1 Destination Next Descriptor Ptr Reg */
+#define MDMA_D1_START_ADDR 0xFFC01F84 /*MemDMA1 Stream 1 Destination Start Address */
+#define MDMA_D1_X_COUNT 0xFFC01F90 /*MemDMA1 Stream 1 Destination Inner-Loop Count */
+#define MDMA_D1_Y_COUNT 0xFFC01F98 /*MemDMA1 Stream 1 Destination Outer-Loop Count */
+#define MDMA_D1_X_MODIFY 0xFFC01F94 /*MemDMA1 Stream 1 Dest Inner-Loop Address-Increment */
+#define MDMA_D1_Y_MODIFY 0xFFC01F9C /*MemDMA1 Stream 1 Dest Outer-Loop Address-Increment */
+#define MDMA_D1_CURR_DESC_PTR 0xFFC01FA0 /*MemDMA1 Stream 1 Dest Current Descriptor Ptr reg */
+#define MDMA_D1_CURR_ADDR 0xFFC01FA4 /*MemDMA1 Stream 1 Dest Current Address */
+#define MDMA_D1_CURR_X_COUNT 0xFFC01FB0 /*MemDMA1 Stream 1 Dest Current Inner-Loop Count */
+#define MDMA_D1_CURR_Y_COUNT 0xFFC01FB8 /*MemDMA1 Stream 1 Dest Current Outer-Loop Count */
+#define MDMA_D1_IRQ_STATUS 0xFFC01FA8 /*MemDMA1 Stream 1 Dest Interrupt/Status */
+#define MDMA_D1_PERIPHERAL_MAP 0xFFC01FAC /*MemDMA1 Stream 1 Dest Peripheral Map */
+
+#define MDMA_S1_CONFIG 0xFFC01FC8 /*MemDMA1 Stream 1 Source Configuration */
+#define MDMA_S1_NEXT_DESC_PTR 0xFFC01FC0 /*MemDMA1 Stream 1 Source Next Descriptor Ptr Reg */
+#define MDMA_S1_START_ADDR 0xFFC01FC4 /*MemDMA1 Stream 1 Source Start Address */
+#define MDMA_S1_X_COUNT 0xFFC01FD0 /*MemDMA1 Stream 1 Source Inner-Loop Count */
+#define MDMA_S1_Y_COUNT 0xFFC01FD8 /*MemDMA1 Stream 1 Source Outer-Loop Count */
+#define MDMA_S1_X_MODIFY 0xFFC01FD4 /*MemDMA1 Stream 1 Source Inner-Loop Address-Increment */
+#define MDMA_S1_Y_MODIFY 0xFFC01FDC /*MemDMA1 Stream 1 Source Outer-Loop Address-Increment */
+#define MDMA_S1_CURR_DESC_PTR 0xFFC01FE0 /*MemDMA1 Stream 1 Source Current Descriptor Ptr reg */
+#define MDMA_S1_CURR_ADDR 0xFFC01FE4 /*MemDMA1 Stream 1 Source Current Address */
+#define MDMA_S1_CURR_X_COUNT 0xFFC01FF0 /*MemDMA1 Stream 1 Source Current Inner-Loop Count */
+#define MDMA_S1_CURR_Y_COUNT 0xFFC01FF8 /*MemDMA1 Stream 1 Source Current Outer-Loop Count */
+#define MDMA_S1_IRQ_STATUS 0xFFC01FE8 /*MemDMA1 Stream 1 Source Interrupt/Status */
+#define MDMA_S1_PERIPHERAL_MAP 0xFFC01FEC /*MemDMA1 Stream 1 Source Peripheral Map */
/* DMA2 Controller registers (0xFFC0 0C00-0xFFC0 0DFF) */
#define DMA2_0_CONFIG 0xFFC00C08 /* DMA2 Channel 0 Configuration register */
@@ -705,61 +705,61 @@
#define DMA2_11_PERIPHERAL_MAP 0xFFC00EEC /* DMA2 Channel 11 Peripheral Map Register */
/* Memory DMA2 Controller registers (0xFFC0 0E80-0xFFC0 0FFF) */
-#define MDMA_D0_CONFIG 0xFFC00F08 /*MemDMA2 Stream 0 Destination Configuration register */
-#define MDMA_D0_NEXT_DESC_PTR 0xFFC00F00 /*MemDMA2 Stream 0 Destination Next Descriptor Ptr Reg */
-#define MDMA_D0_START_ADDR 0xFFC00F04 /*MemDMA2 Stream 0 Destination Start Address */
-#define MDMA_D0_X_COUNT 0xFFC00F10 /*MemDMA2 Stream 0 Dest Inner-Loop Count register */
-#define MDMA_D0_Y_COUNT 0xFFC00F18 /*MemDMA2 Stream 0 Dest Outer-Loop Count register */
-#define MDMA_D0_X_MODIFY 0xFFC00F14 /*MemDMA2 Stream 0 Dest Inner-Loop Address-Increment */
-#define MDMA_D0_Y_MODIFY 0xFFC00F1C /*MemDMA2 Stream 0 Dest Outer-Loop Address-Increment */
-#define MDMA_D0_CURR_DESC_PTR 0xFFC00F20 /*MemDMA2 Stream 0 Dest Current Descriptor Ptr reg */
-#define MDMA_D0_CURR_ADDR 0xFFC00F24 /*MemDMA2 Stream 0 Destination Current Address */
-#define MDMA_D0_CURR_X_COUNT 0xFFC00F30 /*MemDMA2 Stream 0 Dest Current Inner-Loop Count reg */
-#define MDMA_D0_CURR_Y_COUNT 0xFFC00F38 /*MemDMA2 Stream 0 Dest Current Outer-Loop Count reg */
-#define MDMA_D0_IRQ_STATUS 0xFFC00F28 /*MemDMA2 Stream 0 Dest Interrupt/Status Register */
-#define MDMA_D0_PERIPHERAL_MAP 0xFFC00F2C /*MemDMA2 Stream 0 Destination Peripheral Map register */
-
-#define MDMA_S0_CONFIG 0xFFC00F48 /*MemDMA2 Stream 0 Source Configuration register */
-#define MDMA_S0_NEXT_DESC_PTR 0xFFC00F40 /*MemDMA2 Stream 0 Source Next Descriptor Ptr Reg */
-#define MDMA_S0_START_ADDR 0xFFC00F44 /*MemDMA2 Stream 0 Source Start Address */
-#define MDMA_S0_X_COUNT 0xFFC00F50 /*MemDMA2 Stream 0 Source Inner-Loop Count register */
-#define MDMA_S0_Y_COUNT 0xFFC00F58 /*MemDMA2 Stream 0 Source Outer-Loop Count register */
-#define MDMA_S0_X_MODIFY 0xFFC00F54 /*MemDMA2 Stream 0 Src Inner-Loop Addr-Increment reg */
-#define MDMA_S0_Y_MODIFY 0xFFC00F5C /*MemDMA2 Stream 0 Src Outer-Loop Addr-Increment reg */
-#define MDMA_S0_CURR_DESC_PTR 0xFFC00F60 /*MemDMA2 Stream 0 Source Current Descriptor Ptr reg */
-#define MDMA_S0_CURR_ADDR 0xFFC00F64 /*MemDMA2 Stream 0 Source Current Address */
-#define MDMA_S0_CURR_X_COUNT 0xFFC00F70 /*MemDMA2 Stream 0 Src Current Inner-Loop Count reg */
-#define MDMA_S0_CURR_Y_COUNT 0xFFC00F78 /*MemDMA2 Stream 0 Src Current Outer-Loop Count reg */
-#define MDMA_S0_IRQ_STATUS 0xFFC00F68 /*MemDMA2 Stream 0 Source Interrupt/Status Register */
-#define MDMA_S0_PERIPHERAL_MAP 0xFFC00F6C /*MemDMA2 Stream 0 Source Peripheral Map register */
-
-#define MDMA_D1_CONFIG 0xFFC00F88 /*MemDMA2 Stream 1 Destination Configuration register */
-#define MDMA_D1_NEXT_DESC_PTR 0xFFC00F80 /*MemDMA2 Stream 1 Destination Next Descriptor Ptr Reg */
-#define MDMA_D1_START_ADDR 0xFFC00F84 /*MemDMA2 Stream 1 Destination Start Address */
-#define MDMA_D1_X_COUNT 0xFFC00F90 /*MemDMA2 Stream 1 Dest Inner-Loop Count register */
-#define MDMA_D1_Y_COUNT 0xFFC00F98 /*MemDMA2 Stream 1 Dest Outer-Loop Count register */
-#define MDMA_D1_X_MODIFY 0xFFC00F94 /*MemDMA2 Stream 1 Dest Inner-Loop Address-Increment */
-#define MDMA_D1_Y_MODIFY 0xFFC00F9C /*MemDMA2 Stream 1 Dest Outer-Loop Address-Increment */
-#define MDMA_D1_CURR_DESC_PTR 0xFFC00FA0 /*MemDMA2 Stream 1 Destination Current Descriptor Ptr */
-#define MDMA_D1_CURR_ADDR 0xFFC00FA4 /*MemDMA2 Stream 1 Destination Current Address reg */
-#define MDMA_D1_CURR_X_COUNT 0xFFC00FB0 /*MemDMA2 Stream 1 Dest Current Inner-Loop Count reg */
-#define MDMA_D1_CURR_Y_COUNT 0xFFC00FB8 /*MemDMA2 Stream 1 Dest Current Outer-Loop Count reg */
-#define MDMA_D1_IRQ_STATUS 0xFFC00FA8 /*MemDMA2 Stream 1 Destination Interrupt/Status Reg */
-#define MDMA_D1_PERIPHERAL_MAP 0xFFC00FAC /*MemDMA2 Stream 1 Destination Peripheral Map register */
-
-#define MDMA_S1_CONFIG 0xFFC00FC8 /*MemDMA2 Stream 1 Source Configuration register */
-#define MDMA_S1_NEXT_DESC_PTR 0xFFC00FC0 /*MemDMA2 Stream 1 Source Next Descriptor Ptr Reg */
-#define MDMA_S1_START_ADDR 0xFFC00FC4 /*MemDMA2 Stream 1 Source Start Address */
-#define MDMA_S1_X_COUNT 0xFFC00FD0 /*MemDMA2 Stream 1 Source Inner-Loop Count register */
-#define MDMA_S1_Y_COUNT 0xFFC00FD8 /*MemDMA2 Stream 1 Source Outer-Loop Count register */
-#define MDMA_S1_X_MODIFY 0xFFC00FD4 /*MemDMA2 Stream 1 Src Inner-Loop Address-Increment */
-#define MDMA_S1_Y_MODIFY 0xFFC00FDC /*MemDMA2 Stream 1 Source Outer-Loop Address-Increment */
-#define MDMA_S1_CURR_DESC_PTR 0xFFC00FE0 /*MemDMA2 Stream 1 Source Current Descriptor Ptr reg */
-#define MDMA_S1_CURR_ADDR 0xFFC00FE4 /*MemDMA2 Stream 1 Source Current Address */
-#define MDMA_S1_CURR_X_COUNT 0xFFC00FF0 /*MemDMA2 Stream 1 Source Current Inner-Loop Count */
-#define MDMA_S1_CURR_Y_COUNT 0xFFC00FF8 /*MemDMA2 Stream 1 Source Current Outer-Loop Count */
-#define MDMA_S1_IRQ_STATUS 0xFFC00FE8 /*MemDMA2 Stream 1 Source Interrupt/Status Register */
-#define MDMA_S1_PERIPHERAL_MAP 0xFFC00FEC /*MemDMA2 Stream 1 Source Peripheral Map register */
+#define MDMA_D2_CONFIG 0xFFC00F08 /*MemDMA2 Stream 0 Destination Configuration register */
+#define MDMA_D2_NEXT_DESC_PTR 0xFFC00F00 /*MemDMA2 Stream 0 Destination Next Descriptor Ptr Reg */
+#define MDMA_D2_START_ADDR 0xFFC00F04 /*MemDMA2 Stream 0 Destination Start Address */
+#define MDMA_D2_X_COUNT 0xFFC00F10 /*MemDMA2 Stream 0 Dest Inner-Loop Count register */
+#define MDMA_D2_Y_COUNT 0xFFC00F18 /*MemDMA2 Stream 0 Dest Outer-Loop Count register */
+#define MDMA_D2_X_MODIFY 0xFFC00F14 /*MemDMA2 Stream 0 Dest Inner-Loop Address-Increment */
+#define MDMA_D2_Y_MODIFY 0xFFC00F1C /*MemDMA2 Stream 0 Dest Outer-Loop Address-Increment */
+#define MDMA_D2_CURR_DESC_PTR 0xFFC00F20 /*MemDMA2 Stream 0 Dest Current Descriptor Ptr reg */
+#define MDMA_D2_CURR_ADDR 0xFFC00F24 /*MemDMA2 Stream 0 Destination Current Address */
+#define MDMA_D2_CURR_X_COUNT 0xFFC00F30 /*MemDMA2 Stream 0 Dest Current Inner-Loop Count reg */
+#define MDMA_D2_CURR_Y_COUNT 0xFFC00F38 /*MemDMA2 Stream 0 Dest Current Outer-Loop Count reg */
+#define MDMA_D2_IRQ_STATUS 0xFFC00F28 /*MemDMA2 Stream 0 Dest Interrupt/Status Register */
+#define MDMA_D2_PERIPHERAL_MAP 0xFFC00F2C /*MemDMA2 Stream 0 Destination Peripheral Map register */
+
+#define MDMA_S2_CONFIG 0xFFC00F48 /*MemDMA2 Stream 0 Source Configuration register */
+#define MDMA_S2_NEXT_DESC_PTR 0xFFC00F40 /*MemDMA2 Stream 0 Source Next Descriptor Ptr Reg */
+#define MDMA_S2_START_ADDR 0xFFC00F44 /*MemDMA2 Stream 0 Source Start Address */
+#define MDMA_S2_X_COUNT 0xFFC00F50 /*MemDMA2 Stream 0 Source Inner-Loop Count register */
+#define MDMA_S2_Y_COUNT 0xFFC00F58 /*MemDMA2 Stream 0 Source Outer-Loop Count register */
+#define MDMA_S2_X_MODIFY 0xFFC00F54 /*MemDMA2 Stream 0 Src Inner-Loop Addr-Increment reg */
+#define MDMA_S2_Y_MODIFY 0xFFC00F5C /*MemDMA2 Stream 0 Src Outer-Loop Addr-Increment reg */
+#define MDMA_S2_CURR_DESC_PTR 0xFFC00F60 /*MemDMA2 Stream 0 Source Current Descriptor Ptr reg */
+#define MDMA_S2_CURR_ADDR 0xFFC00F64 /*MemDMA2 Stream 0 Source Current Address */
+#define MDMA_S2_CURR_X_COUNT 0xFFC00F70 /*MemDMA2 Stream 0 Src Current Inner-Loop Count reg */
+#define MDMA_S2_CURR_Y_COUNT 0xFFC00F78 /*MemDMA2 Stream 0 Src Current Outer-Loop Count reg */
+#define MDMA_S2_IRQ_STATUS 0xFFC00F68 /*MemDMA2 Stream 0 Source Interrupt/Status Register */
+#define MDMA_S2_PERIPHERAL_MAP 0xFFC00F6C /*MemDMA2 Stream 0 Source Peripheral Map register */
+
+#define MDMA_D3_CONFIG 0xFFC00F88 /*MemDMA2 Stream 1 Destination Configuration register */
+#define MDMA_D3_NEXT_DESC_PTR 0xFFC00F80 /*MemDMA2 Stream 1 Destination Next Descriptor Ptr Reg */
+#define MDMA_D3_START_ADDR 0xFFC00F84 /*MemDMA2 Stream 1 Destination Start Address */
+#define MDMA_D3_X_COUNT 0xFFC00F90 /*MemDMA2 Stream 1 Dest Inner-Loop Count register */
+#define MDMA_D3_Y_COUNT 0xFFC00F98 /*MemDMA2 Stream 1 Dest Outer-Loop Count register */
+#define MDMA_D3_X_MODIFY 0xFFC00F94 /*MemDMA2 Stream 1 Dest Inner-Loop Address-Increment */
+#define MDMA_D3_Y_MODIFY 0xFFC00F9C /*MemDMA2 Stream 1 Dest Outer-Loop Address-Increment */
+#define MDMA_D3_CURR_DESC_PTR 0xFFC00FA0 /*MemDMA2 Stream 1 Destination Current Descriptor Ptr */
+#define MDMA_D3_CURR_ADDR 0xFFC00FA4 /*MemDMA2 Stream 1 Destination Current Address reg */
+#define MDMA_D3_CURR_X_COUNT 0xFFC00FB0 /*MemDMA2 Stream 1 Dest Current Inner-Loop Count reg */
+#define MDMA_D3_CURR_Y_COUNT 0xFFC00FB8 /*MemDMA2 Stream 1 Dest Current Outer-Loop Count reg */
+#define MDMA_D3_IRQ_STATUS 0xFFC00FA8 /*MemDMA2 Stream 1 Destination Interrupt/Status Reg */
+#define MDMA_D3_PERIPHERAL_MAP 0xFFC00FAC /*MemDMA2 Stream 1 Destination Peripheral Map register */
+
+#define MDMA_S3_CONFIG 0xFFC00FC8 /*MemDMA2 Stream 1 Source Configuration register */
+#define MDMA_S3_NEXT_DESC_PTR 0xFFC00FC0 /*MemDMA2 Stream 1 Source Next Descriptor Ptr Reg */
+#define MDMA_S3_START_ADDR 0xFFC00FC4 /*MemDMA2 Stream 1 Source Start Address */
+#define MDMA_S3_X_COUNT 0xFFC00FD0 /*MemDMA2 Stream 1 Source Inner-Loop Count register */
+#define MDMA_S3_Y_COUNT 0xFFC00FD8 /*MemDMA2 Stream 1 Source Outer-Loop Count register */
+#define MDMA_S3_X_MODIFY 0xFFC00FD4 /*MemDMA2 Stream 1 Src Inner-Loop Address-Increment */
+#define MDMA_S3_Y_MODIFY 0xFFC00FDC /*MemDMA2 Stream 1 Source Outer-Loop Address-Increment */
+#define MDMA_S3_CURR_DESC_PTR 0xFFC00FE0 /*MemDMA2 Stream 1 Source Current Descriptor Ptr reg */
+#define MDMA_S3_CURR_ADDR 0xFFC00FE4 /*MemDMA2 Stream 1 Source Current Address */
+#define MDMA_S3_CURR_X_COUNT 0xFFC00FF0 /*MemDMA2 Stream 1 Source Current Inner-Loop Count */
+#define MDMA_S3_CURR_Y_COUNT 0xFFC00FF8 /*MemDMA2 Stream 1 Source Current Outer-Loop Count */
+#define MDMA_S3_IRQ_STATUS 0xFFC00FE8 /*MemDMA2 Stream 1 Source Interrupt/Status Register */
+#define MDMA_S3_PERIPHERAL_MAP 0xFFC00FEC /*MemDMA2 Stream 1 Source Peripheral Map register */
/* Internal Memory DMA Registers (0xFFC0_1800 - 0xFFC0_19FF) */
#define IMDMA_D0_CONFIG 0xFFC01808 /*IMDMA Stream 0 Destination Configuration */
@@ -879,6 +879,13 @@
#define DLENGTH 0x00003800 /* PPI Data Length */
#define DLEN_8 0x0 /* PPI Data Length mask for DLEN=8 */
#define DLEN(x) (((x-9) & 0x07) << 11) /* PPI Data Length (only works for x=10-->x=16) */
+#define DLEN_10 0x00000800 /* Data Length = 10 Bits */
+#define DLEN_11 0x00001000 /* Data Length = 11 Bits */
+#define DLEN_12 0x00001800 /* Data Length = 12 Bits */
+#define DLEN_13 0x00002000 /* Data Length = 13 Bits */
+#define DLEN_14 0x00002800 /* Data Length = 14 Bits */
+#define DLEN_15 0x00003000 /* Data Length = 15 Bits */
+#define DLEN_16 0x00003800 /* Data Length = 16 Bits */
#define POL 0x0000C000 /* PPI Signal Polarities */
#define POLC 0x4000 /* PPI Clock Polarity */
#define POLS 0x8000 /* PPI Frame Sync Polarity */
diff --git a/arch/blackfin/mach-bf561/smp.c b/arch/blackfin/mach-bf561/smp.c
index ab1c617b9cf..11789beca75 100644
--- a/arch/blackfin/mach-bf561/smp.c
+++ b/arch/blackfin/mach-bf561/smp.c
@@ -48,7 +48,7 @@ int __init setup_profiling_timer(unsigned int multiplier) /* not supported */
return -EINVAL;
}
-void __cpuinit platform_secondary_init(unsigned int cpu)
+void platform_secondary_init(unsigned int cpu)
{
/* Clone setup for peripheral interrupt sources from CoreA. */
bfin_write_SICB_IMASK0(bfin_read_SIC_IMASK0());
@@ -69,12 +69,11 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
SSYNC();
/* We are done with local CPU inits, unblock the boot CPU. */
- set_cpu_online(cpu, true);
spin_lock(&boot_lock);
spin_unlock(&boot_lock);
}
-int __cpuinit platform_boot_secondary(unsigned int cpu, struct task_struct *idle)
+int platform_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
unsigned long timeout;
@@ -91,7 +90,9 @@ int __cpuinit platform_boot_secondary(unsigned int cpu, struct task_struct *idle
SSYNC();
}
- timeout = jiffies + 1 * HZ;
+ timeout = jiffies + HZ;
+ /* release the lock and let coreb run */
+ spin_unlock(&boot_lock);
while (time_before(jiffies, timeout)) {
if (cpu_online(cpu))
break;
@@ -100,8 +101,6 @@ int __cpuinit platform_boot_secondary(unsigned int cpu, struct task_struct *idle
}
if (cpu_online(cpu)) {
- /* release the lock and let coreb run */
- spin_unlock(&boot_lock);
return 0;
} else
panic("CPU%u: processor failed to boot\n", cpu);
@@ -155,7 +154,7 @@ void platform_clear_ipi(unsigned int cpu, int irq)
* Setup core B's local core timer.
* In SMP, core timer is used for clock event device.
*/
-void __cpuinit bfin_local_timer_setup(void)
+void bfin_local_timer_setup(void)
{
#if defined(CONFIG_TICKSOURCE_CORETMR)
struct irq_data *data = irq_get_irq_data(IRQ_CORETMR);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-20 03:31:18 +0000