diff options
Diffstat (limited to 'arch/blackfin/mach-bf561/boards')
| -rw-r--r-- | arch/blackfin/mach-bf561/boards/Kconfig | 29 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf561/boards/Makefile | 5 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf561/boards/acvilon.c | 543 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf561/boards/cm_bf561.c | 527 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf561/boards/ezkit.c | 666 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf561/boards/generic_board.c | 82 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf561/boards/tepla.c | 162 |
7 files changed, 1732 insertions, 282 deletions
diff --git a/arch/blackfin/mach-bf561/boards/Kconfig b/arch/blackfin/mach-bf561/boards/Kconfig new file mode 100644 index 00000000000..1aa529b9f8b --- /dev/null +++ b/arch/blackfin/mach-bf561/boards/Kconfig @@ -0,0 +1,29 @@ +choice + prompt "System type" + default BFIN561_EZKIT + help + Select your board! + +config BFIN561_EZKIT + bool "BF561-EZKIT" + help + BF561-EZKIT-LITE board support. + +config BFIN561_TEPLA + bool "BF561-TEPLA" + help + BF561-TEPLA board support. + +config BFIN561_BLUETECHNIX_CM + bool "Bluetechnix CM-BF561" + help + CM-BF561 support for EVAL- and DEV-Board. + +config BFIN561_ACVILON + bool "BF561-ACVILON" + help + BF561-ACVILON System On Module support (SO-DIMM 144). + For more information about Acvilon BF561 SoM + please go to http://www.niistt.ru/ + +endchoice diff --git a/arch/blackfin/mach-bf561/boards/Makefile b/arch/blackfin/mach-bf561/boards/Makefile index 886edc739ab..a5879f7857a 100644 --- a/arch/blackfin/mach-bf561/boards/Makefile +++ b/arch/blackfin/mach-bf561/boards/Makefile @@ -2,6 +2,7 @@ # arch/blackfin/mach-bf561/boards/Makefile # -obj-$(CONFIG_GENERIC_BOARD) += generic_board.o -obj-$(CONFIG_BFIN561_EZKIT) += ezkit.o +obj-$(CONFIG_BFIN561_ACVILON) += acvilon.o obj-$(CONFIG_BFIN561_BLUETECHNIX_CM) += cm_bf561.o +obj-$(CONFIG_BFIN561_EZKIT) += ezkit.o +obj-$(CONFIG_BFIN561_TEPLA) += tepla.o diff --git a/arch/blackfin/mach-bf561/boards/acvilon.c b/arch/blackfin/mach-bf561/boards/acvilon.c new file mode 100644 index 00000000000..6ab951534d7 --- /dev/null +++ b/arch/blackfin/mach-bf561/boards/acvilon.c @@ -0,0 +1,543 @@ +/* + * File: arch/blackfin/mach-bf561/acvilon.c + * Based on: arch/blackfin/mach-bf561/ezkit.c + * Author: + * + * Created: + * Description: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * Copyright 2009 CJSC "NII STT" + * + * Bugs: + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * + * For more information about Acvilon BF561 SoM please + * go to http://www.niistt.ru/ + * + */ + +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/plat-ram.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/gpio.h> +#include <linux/jiffies.h> +#include <linux/i2c-pca-platform.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <asm/dma.h> +#include <asm/bfin5xx_spi.h> +#include <asm/portmux.h> +#include <asm/dpmc.h> +#include <asm/cacheflush.h> +#include <linux/i2c.h> + +/* + * Name the Board for the /proc/cpuinfo + */ +const char bfin_board_name[] = "Acvilon board"; + +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) +#include <linux/usb/isp1760.h> +static struct resource bfin_isp1760_resources[] = { + [0] = { + .start = 0x20000000, + .end = 0x20000000 + 0x000fffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PF15, + .end = IRQ_PF15, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; + +static struct isp1760_platform_data isp1760_priv = { + .is_isp1761 = 0, + .port1_disable = 0, + .bus_width_16 = 1, + .port1_otg = 0, + .analog_oc = 0, + .dack_polarity_high = 0, + .dreq_polarity_high = 0, +}; + +static struct platform_device bfin_isp1760_device = { + .name = "isp1760-hcd", + .id = 0, + .dev = { + .platform_data = &isp1760_priv, + }, + .num_resources = ARRAY_SIZE(bfin_isp1760_resources), + .resource = bfin_isp1760_resources, +}; +#endif + +static struct resource bfin_i2c_pca_resources[] = { + { + .name = "pca9564-regs", + .start = 0x2C000000, + .end = 0x2C000000 + 16, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT, + }, { + + .start = IRQ_PF8, + .end = IRQ_PF8, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; + +struct i2c_pca9564_pf_platform_data pca9564_platform_data = { + .gpio = -1, + .i2c_clock_speed = 330000, + .timeout = HZ, +}; + +/* PCA9564 I2C Bus driver */ +static struct platform_device bfin_i2c_pca_device = { + .name = "i2c-pca-platform", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_i2c_pca_resources), + .resource = bfin_i2c_pca_resources, + .dev = { + .platform_data = &pca9564_platform_data, + } +}; + +/* I2C devices fitted. */ +static struct i2c_board_info acvilon_i2c_devs[] __initdata = { + { + I2C_BOARD_INFO("ds1339", 0x68), + }, + { + I2C_BOARD_INFO("tcn75", 0x49), + }, +}; + +#if IS_ENABLED(CONFIG_MTD_PLATRAM) +static struct platdata_mtd_ram mtd_ram_data = { + .mapname = "rootfs(RAM)", + .bankwidth = 4, +}; + +static struct resource mtd_ram_resource = { + .start = 0x4000000, + .end = 0x5ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device mtd_ram_device = { + .name = "mtd-ram", + .id = 0, + .dev = { + .platform_data = &mtd_ram_data, + }, + .num_resources = 1, + .resource = &mtd_ram_resource, +}; +#endif + +#if IS_ENABLED(CONFIG_SMSC911X) +#include <linux/smsc911x.h> +static struct resource smsc911x_resources[] = { + { + .name = "smsc911x-memory", + .start = 0x28000000, + .end = 0x28000000 + 0xFF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PF7, + .end = IRQ_PF7, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; + +static struct smsc911x_platform_config smsc911x_config = { + .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + +static struct platform_device smsc911x_device = { + .name = "smsc911x", + .id = 0, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, + .dev = { + .platform_data = &smsc911x_config, + }, +}; +#endif + +#if IS_ENABLED(CONFIG_SERIAL_BFIN) +#ifdef CONFIG_SERIAL_BFIN_UART0 +static struct resource bfin_uart0_resources[] = { + { + .start = BFIN_UART_THR, + .end = BFIN_UART_GCTL + 2, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_UART_TX, + .end = IRQ_UART_TX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART_RX, + .end = IRQ_UART_RX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART_ERROR, + .end = IRQ_UART_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART_TX, + .end = CH_UART_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART_RX, + .end = CH_UART_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static unsigned short bfin_uart0_peripherals[] = { + P_UART0_TX, P_UART0_RX, 0 +}; + +static struct platform_device bfin_uart0_device = { + .name = "bfin-uart", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_uart0_resources), + .resource = bfin_uart0_resources, + .dev = { + /* Passed to driver */ + .platform_data = &bfin_uart0_peripherals, + }, +}; +#endif +#endif + +#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM) + +static struct mtd_partition bfin_plat_nand_partitions[] = { + { + .name = "params(nand)", + .size = 32 * 1024 * 1024, + .offset = 0, + }, { + .name = "userfs(nand)", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + }, +}; + +#define BFIN_NAND_PLAT_CLE 2 +#define BFIN_NAND_PLAT_ALE 3 + +static void bfin_plat_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + + if (cmd == NAND_CMD_NONE) + return; + + if (ctrl & NAND_CLE) + writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_CLE)); + else + writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_ALE)); +} + +#define BFIN_NAND_PLAT_READY GPIO_PF10 +static int bfin_plat_nand_dev_ready(struct mtd_info *mtd) +{ + return gpio_get_value(BFIN_NAND_PLAT_READY); +} + +static struct platform_nand_data bfin_plat_nand_data = { + .chip = { + .nr_chips = 1, + .chip_delay = 30, + .partitions = bfin_plat_nand_partitions, + .nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions), + }, + .ctrl = { + .cmd_ctrl = bfin_plat_nand_cmd_ctrl, + .dev_ready = bfin_plat_nand_dev_ready, + }, +}; + +#define MAX(x, y) (x > y ? x : y) +static struct resource bfin_plat_nand_resources = { + .start = 0x24000000, + .end = 0x24000000 + (1 << MAX(BFIN_NAND_PLAT_CLE, BFIN_NAND_PLAT_ALE)), + .flags = IORESOURCE_MEM, +}; + +static struct platform_device bfin_async_nand_device = { + .name = "gen_nand", + .id = -1, + .num_resources = 1, + .resource = &bfin_plat_nand_resources, + .dev = { + .platform_data = &bfin_plat_nand_data, + }, +}; + +static void bfin_plat_nand_init(void) +{ + gpio_request(BFIN_NAND_PLAT_READY, "bfin_nand_plat"); +} +#else +static void bfin_plat_nand_init(void) +{ +} +#endif + +#if IS_ENABLED(CONFIG_MTD_DATAFLASH) +static struct mtd_partition bfin_spi_dataflash_partitions[] = { + { + .name = "bootloader", + .size = 0x4200, + .offset = 0, + .mask_flags = MTD_CAP_ROM}, + { + .name = "u-boot", + .size = 0x42000, + .offset = MTDPART_OFS_APPEND, + }, + { + .name = "u-boot(params)", + .size = 0x4200, + .offset = MTDPART_OFS_APPEND, + }, + { + .name = "kernel", + .size = 0x294000, + .offset = MTDPART_OFS_APPEND, + }, + { + .name = "params", + .size = 0x42000, + .offset = MTDPART_OFS_APPEND, + }, + { + .name = "rootfs", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct flash_platform_data bfin_spi_dataflash_data = { + .name = "SPI Dataflash", + .parts = bfin_spi_dataflash_partitions, + .nr_parts = ARRAY_SIZE(bfin_spi_dataflash_partitions), +}; + +/* DataFlash chip */ +static struct bfin5xx_spi_chip data_flash_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip */ +}; +#endif + +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = IRQ_SPI, + .end = IRQ_SPI, + .flags = IORESOURCE_IRQ, + }, +}; + +/* SPI controller data */ +static struct bfin5xx_spi_master bfin_spi0_info = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, +}; + +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, + .dev = { + .platform_data = &bfin_spi0_info, /* Passed to driver */ + }, +}; +#endif + +static struct spi_board_info bfin_spi_board_info[] __initdata = { +#if IS_ENABLED(CONFIG_SPI_SPIDEV) + { + .modalias = "spidev", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 3, + }, +#endif +#if IS_ENABLED(CONFIG_MTD_DATAFLASH) + { /* DataFlash chip */ + .modalias = "mtd_dataflash", + .max_speed_hz = 33250000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 2, /* Framework chip select */ + .platform_data = &bfin_spi_dataflash_data, + .controller_data = &data_flash_chip_info, + .mode = SPI_MODE_3, + }, +#endif +}; + +static struct resource bfin_gpios_resources = { + .start = 31, +/* .end = MAX_BLACKFIN_GPIOS - 1, */ + .end = 32, + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device bfin_gpios_device = { + .name = "simple-gpio", + .id = -1, + .num_resources = 1, + .resource = &bfin_gpios_resources, +}; + +static const unsigned int cclk_vlev_datasheet[] = { + VRPAIR(VLEV_085, 250000000), + VRPAIR(VLEV_090, 300000000), + VRPAIR(VLEV_095, 313000000), + VRPAIR(VLEV_100, 350000000), + VRPAIR(VLEV_105, 400000000), + VRPAIR(VLEV_110, 444000000), + VRPAIR(VLEV_115, 450000000), + VRPAIR(VLEV_120, 475000000), + VRPAIR(VLEV_125, 500000000), + VRPAIR(VLEV_130, 600000000), +}; + +static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = { + .tuple_tab = cclk_vlev_datasheet, + .tabsize = ARRAY_SIZE(cclk_vlev_datasheet), + .vr_settling_time = 25 /* us */ , +}; + +static struct platform_device bfin_dpmc = { + .name = "bfin dpmc", + .dev = { + .platform_data = &bfin_dmpc_vreg_data, + }, +}; + +static struct platform_device *acvilon_devices[] __initdata = { + &bfin_dpmc, + +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) + &bfin_spi0_device, +#endif + +#if IS_ENABLED(CONFIG_SERIAL_BFIN) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#endif + + &bfin_gpios_device, + +#if IS_ENABLED(CONFIG_SMSC911X) + &smsc911x_device, +#endif + + &bfin_i2c_pca_device, + +#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM) + &bfin_async_nand_device, +#endif + +#if IS_ENABLED(CONFIG_MTD_PLATRAM) + &mtd_ram_device, +#endif + +}; + +static int __init acvilon_init(void) +{ + int ret; + + printk(KERN_INFO "%s(): registering device resources\n", __func__); + + bfin_plat_nand_init(); + ret = + platform_add_devices(acvilon_devices, ARRAY_SIZE(acvilon_devices)); + if (ret < 0) + return ret; + + i2c_register_board_info(0, acvilon_i2c_devs, + ARRAY_SIZE(acvilon_i2c_devs)); + + bfin_write_FIO0_FLAG_C(1 << 14); + msleep(5); + bfin_write_FIO0_FLAG_S(1 << 14); + + spi_register_board_info(bfin_spi_board_info, + ARRAY_SIZE(bfin_spi_board_info)); + return 0; +} + +arch_initcall(acvilon_init); + +static struct platform_device *acvilon_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(acvilon_early_devices, + ARRAY_SIZE(acvilon_early_devices)); +} diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index 6824e956d15..e862f7823e6 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -1,30 +1,10 @@ /* - * File: arch/blackfin/mach-bf533/boards/cm_bf561.c - * Based on: arch/blackfin/mach-bf533/boards/ezkit.c - * Author: Aidan Williams <aidan@nicta.com.au> Copright 2005 + * Copyright 2004-2009 Analog Devices Inc. + * 2008-2009 Bluetechnix + * 2005 National ICT Australia (NICTA) + * Aidan Williams <aidan@nicta.com.au> * - * Created: 2006 - * Description: Board description file - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <linux/device.h> @@ -33,31 +13,39 @@ #include <linux/mtd/partitions.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#include <linux/usb_isp1362.h> -#include <asm/irq.h> +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) +#include <linux/usb/isp1362.h> +#endif +#include <linux/ata_platform.h> +#include <linux/irq.h> +#include <linux/gpio.h> +#include <asm/dma.h> #include <asm/bfin5xx_spi.h> +#include <asm/portmux.h> +#include <asm/dpmc.h> +#include <linux/mtd/physmap.h> /* * Name the Board for the /proc/cpuinfo */ -char *bfin_board_name = "Bluetechnix CM BF561"; +const char bfin_board_name[] = "Bluetechnix CM BF561"; -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) -/* all SPI perpherals info goes here */ +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) +/* all SPI peripherals info goes here */ -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00020000, .offset = 0, .mask_flags = MTD_CAP_ROM - },{ - .name = "kernel", + }, { + .name = "linux kernel(spi)", .size = 0xe0000, .offset = 0x20000 - },{ - .name = "file system", + }, { + .name = "file system(spi)", .size = 0x700000, .offset = 0x00100000, } @@ -73,46 +61,16 @@ static struct flash_platform_data bfin_spi_flash_data = { /* SPI flash chip (m25p64) */ static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ - .bits_per_word = 8, -}; -#endif - -#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) -/* SPI ADC chip */ -static struct bfin5xx_spi_chip spi_adc_chip_info = { - .enable_dma = 1, /* use dma transfer with this chip*/ - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) -static struct bfin5xx_spi_chip ad1836_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) -static struct bfin5xx_spi_chip ad9960_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { - .enable_dma = 1, - .bits_per_word = 8, }; #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, @@ -120,65 +78,78 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) - { - .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ - .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ - .chip_select = 1, /* Framework chip select. */ - .platform_data = NULL, /* No spi_driver specific config */ - .controller_data = &spi_adc_chip_info, - }, -#endif - -#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { - .modalias = "ad1836-spi", + .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, - .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, - .controller_data = &ad1836_spi_chip_info, + .bus_num = 0, + .chip_select = 4, }, #endif -#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { - .modalias = "ad9960-spi", - .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .modalias = "mmc_spi", + .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, .chip_select = 1, - .controller_data = &ad9960_spi_chip_info, - }, -#endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) - { - .modalias = "spi_mmc", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, .mode = SPI_MODE_3, }, #endif }; +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = IRQ_SPI, + .end = IRQ_SPI, + .flags = IORESOURCE_IRQ, + }, +}; + /* SPI controller data */ -static struct bfin5xx_spi_master spi_bfin_master_info = { +static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, }; -static struct platform_device spi_bfin_master_device = { - .name = "bfin-spi-master", - .id = 1, /* Bus number */ +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, .dev = { - .platform_data = &spi_bfin_master_info, /* Passed to driver */ + .platform_data = &bfin_spi0_info, /* Passed to driver */ }, }; #endif /* spi master and devices */ -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_FB_HITACHI_TX09) +static struct platform_device hitachi_fb_device = { + .name = "hitachi-tx09", +}; +#endif + + +#if IS_ENABLED(CONFIG_SMC91X) +#include <linux/smc91x.h> + +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_32BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; static struct resource smc91x_resources[] = { { @@ -186,7 +157,7 @@ static struct resource smc91x_resources[] = { .start = 0x28000300, .end = 0x28000300 + 16, .flags = IORESOURCE_MEM, - },{ + }, { .start = IRQ_PF0, .end = IRQ_PF0, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, @@ -197,23 +168,82 @@ static struct platform_device smc91x_device = { .id = 0, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, + .dev = { + .platform_data = &smc91x_info, + }, +}; +#endif + +#if IS_ENABLED(CONFIG_SMSC911X) +#include <linux/smsc911x.h> + +static struct resource smsc911x_resources[] = { + { + .name = "smsc911x-memory", + .start = 0x24008000, + .end = 0x24008000 + 0xFF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PF43, + .end = IRQ_PF43, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; + +static struct smsc911x_platform_config smsc911x_config = { + .flags = SMSC911X_USE_16BIT, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + +static struct platform_device smsc911x_device = { + .name = "smsc911x", + .id = 0, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, + .dev = { + .platform_data = &smsc911x_config, + }, +}; +#endif + +#if IS_ENABLED(CONFIG_USB_NET2272) +static struct resource net2272_bfin_resources[] = { + { + .start = 0x24000000, + .end = 0x24000000 + 0x100, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PF45, + .end = IRQ_PF45, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct platform_device net2272_bfin_device = { + .name = "net2272", + .id = -1, + .num_resources = ARRAY_SIZE(net2272_bfin_resources), + .resource = net2272_bfin_resources, }; #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) static struct resource isp1362_hcd_resources[] = { { .start = 0x24008000, .end = 0x24008000, .flags = IORESOURCE_MEM, - },{ + }, { .start = 0x24008004, .end = 0x24008004, .flags = IORESOURCE_MEM, - },{ + }, { .start = IRQ_PF47, .end = IRQ_PF47, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, }, }; @@ -239,51 +269,288 @@ static struct platform_device isp1362_hcd_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) -static struct resource bfin_uart_resources[] = { - { - .start = 0xFFC00400, - .end = 0xFFC004FF, - .flags = IORESOURCE_MEM, - }, +#if IS_ENABLED(CONFIG_SERIAL_BFIN) +#ifdef CONFIG_SERIAL_BFIN_UART0 +static struct resource bfin_uart0_resources[] = { + { + .start = BFIN_UART_THR, + .end = BFIN_UART_GCTL+2, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_UART_TX, + .end = IRQ_UART_TX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART_RX, + .end = IRQ_UART_RX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART_ERROR, + .end = IRQ_UART_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART_TX, + .end = CH_UART_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART_RX, + .end = CH_UART_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static unsigned short bfin_uart0_peripherals[] = { + P_UART0_TX, P_UART0_RX, 0 +}; + +static struct platform_device bfin_uart0_device = { + .name = "bfin-uart", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_uart0_resources), + .resource = bfin_uart0_resources, + .dev = { + .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ + }, +}; +#endif +#endif + +#if IS_ENABLED(CONFIG_BFIN_SIR) +#ifdef CONFIG_BFIN_SIR0 +static struct resource bfin_sir0_resources[] = { + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX+1, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device bfin_sir0_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir0_resources), + .resource = bfin_sir0_resources, +}; +#endif +#endif + +#if IS_ENABLED(CONFIG_PATA_PLATFORM) +#define PATA_INT IRQ_PF46 + +static struct pata_platform_info bfin_pata_platform_data = { + .ioport_shift = 2, + .irq_type = IRQF_TRIGGER_HIGH, }; -static struct platform_device bfin_uart_device = { - .name = "bfin-uart", - .id = 1, - .num_resources = ARRAY_SIZE(bfin_uart_resources), - .resource = bfin_uart_resources, +static struct resource bfin_pata_resources[] = { + { + .start = 0x2400C000, + .end = 0x2400C001F, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x2400D018, + .end = 0x2400D01B, + .flags = IORESOURCE_MEM, + }, + { + .start = PATA_INT, + .end = PATA_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pata_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pata_resources), + .resource = bfin_pata_resources, + .dev = { + .platform_data = &bfin_pata_platform_data, + } +}; +#endif + +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) +static struct mtd_partition para_partitions[] = { + { + .name = "bootloader(nor)", + .size = 0x40000, + .offset = 0, + }, { + .name = "linux kernel(nor)", + .size = 0x100000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "file system(nor)", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct physmap_flash_data para_flash_data = { + .width = 2, + .parts = para_partitions, + .nr_parts = ARRAY_SIZE(para_partitions), +}; + +static struct resource para_flash_resource = { + .start = 0x20000000, + .end = 0x207fffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device para_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = ¶_flash_data, + }, + .num_resources = 1, + .resource = ¶_flash_resource, }; #endif +static const unsigned int cclk_vlev_datasheet[] = +{ + VRPAIR(VLEV_085, 250000000), + VRPAIR(VLEV_090, 300000000), + VRPAIR(VLEV_095, 313000000), + VRPAIR(VLEV_100, 350000000), + VRPAIR(VLEV_105, 400000000), + VRPAIR(VLEV_110, 444000000), + VRPAIR(VLEV_115, 450000000), + VRPAIR(VLEV_120, 475000000), + VRPAIR(VLEV_125, 500000000), + VRPAIR(VLEV_130, 600000000), +}; + +static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = { + .tuple_tab = cclk_vlev_datasheet, + .tabsize = ARRAY_SIZE(cclk_vlev_datasheet), + .vr_settling_time = 25 /* us */, +}; + +static struct platform_device bfin_dpmc = { + .name = "bfin dpmc", + .dev = { + .platform_data = &bfin_dmpc_vreg_data, + }, +}; + static struct platform_device *cm_bf561_devices[] __initdata = { -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) - &bfin_uart_device, + &bfin_dpmc, + +#if IS_ENABLED(CONFIG_FB_HITACHI_TX09) + &hitachi_fb_device, #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#endif + +#if IS_ENABLED(CONFIG_BFIN_SIR) +#ifdef CONFIG_BFIN_SIR0 + &bfin_sir0_device, +#endif +#endif + +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) &isp1362_hcd_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - &spi_bfin_master_device, +#if IS_ENABLED(CONFIG_SMSC911X) + &smsc911x_device, #endif +#if IS_ENABLED(CONFIG_USB_NET2272) + &net2272_bfin_device, +#endif + +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) + &bfin_spi0_device, +#endif + +#if IS_ENABLED(CONFIG_PATA_PLATFORM) + &bfin_pata_device, +#endif + +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) + ¶_flash_device, +#endif }; +static int __init net2272_init(void) +{ +#if IS_ENABLED(CONFIG_USB_NET2272) + int ret; + + ret = gpio_request(GPIO_PF46, "net2272"); + if (ret) + return ret; + + /* Reset USB Chip, PF46 */ + gpio_direction_output(GPIO_PF46, 0); + mdelay(2); + gpio_set_value(GPIO_PF46, 1); +#endif + + return 0; +} + static int __init cm_bf561_init(void) { - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf561_devices, ARRAY_SIZE(cm_bf561_devices)); -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif + +#if IS_ENABLED(CONFIG_PATA_PLATFORM) + irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN); +#endif + + if (net2272_init()) + pr_warning("unable to configure net2272; it probably won't work\n"); + return 0; } arch_initcall(cm_bf561_init); + +static struct platform_device *cm_bf561_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(cm_bf561_early_devices, + ARRAY_SIZE(cm_bf561_early_devices)); +} diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index 14eb4f9a68e..2de71e8c104 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -1,55 +1,151 @@ /* - * File: arch/blackfin/mach-bf561/ezkit.c - * Based on: - * Author: + * Copyright 2004-2009 Analog Devices Inc. + * 2005 National ICT Australia (NICTA) + * Aidan Williams <aidan@nicta.com.au> * - * Created: - * Description: - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <linux/device.h> #include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> #include <linux/spi/spi.h> -#include <asm/irq.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <asm/dma.h> #include <asm/bfin5xx_spi.h> +#include <asm/portmux.h> +#include <asm/dpmc.h> /* * Name the Board for the /proc/cpuinfo */ -char *bfin_board_name = "ADDS-BF561-EZKIT"; +const char bfin_board_name[] = "ADI BF561-EZKIT"; + +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) +#include <linux/usb/isp1760.h> +static struct resource bfin_isp1760_resources[] = { + [0] = { + .start = 0x2C0F0000, + .end = 0x203C0000 + 0xfffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PF10, + .end = IRQ_PF10, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct isp1760_platform_data isp1760_priv = { + .is_isp1761 = 0, + .bus_width_16 = 1, + .port1_otg = 0, + .analog_oc = 0, + .dack_polarity_high = 0, + .dreq_polarity_high = 0, +}; + +static struct platform_device bfin_isp1760_device = { + .name = "isp1760", + .id = 0, + .dev = { + .platform_data = &isp1760_priv, + }, + .num_resources = ARRAY_SIZE(bfin_isp1760_resources), + .resource = bfin_isp1760_resources, +}; +#endif + +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) +#include <linux/usb/isp1362.h> + +static struct resource isp1362_hcd_resources[] = { + { + .start = 0x2c060000, + .end = 0x2c060000, + .flags = IORESOURCE_MEM, + }, { + .start = 0x2c060004, + .end = 0x2c060004, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PF8, + .end = IRQ_PF8, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, + }, +}; + +static struct isp1362_platform_data isp1362_priv = { + .sel15Kres = 1, + .clknotstop = 0, + .oc_enable = 0, + .int_act_high = 0, + .int_edge_triggered = 0, + .remote_wakeup_connected = 0, + .no_power_switching = 1, + .power_switching_mode = 0, +}; + +static struct platform_device isp1362_hcd_device = { + .name = "isp1362-hcd", + .id = 0, + .dev = { + .platform_data = &isp1362_priv, + }, + .num_resources = ARRAY_SIZE(isp1362_hcd_resources), + .resource = isp1362_hcd_resources, +}; +#endif + +#if IS_ENABLED(CONFIG_USB_NET2272) +static struct resource net2272_bfin_resources[] = { + { + .start = 0x2C000000, + .end = 0x2C000000 + 0x7F, + .flags = IORESOURCE_MEM, + }, { + .start = 1, + .flags = IORESOURCE_BUS, + }, { + .start = IRQ_PF10, + .end = IRQ_PF10, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; + +static struct platform_device net2272_bfin_device = { + .name = "net2272", + .id = -1, + .num_resources = ARRAY_SIZE(net2272_bfin_resources), + .resource = net2272_bfin_resources, +}; +#endif /* * USB-LAN EzExtender board * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) +#include <linux/smc91x.h> + +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_32BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource smc91x_resources[] = { { .name = "smc91x-regs", .start = 0x2C010300, .end = 0x2C010300 + 16, .flags = IORESOURCE_MEM, - },{ + }, { .start = IRQ_PF9, .end = IRQ_PF9, @@ -62,86 +158,520 @@ static struct platform_device smc91x_device = { .id = 0, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, + .dev = { + .platform_data = &smc91x_info, + }, }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) -static struct resource bfin_uart_resources[] = { - { - .start = 0xFFC00400, - .end = 0xFFC004FF, - .flags = IORESOURCE_MEM, - }, +#if IS_ENABLED(CONFIG_SERIAL_BFIN) +#ifdef CONFIG_SERIAL_BFIN_UART0 +static struct resource bfin_uart0_resources[] = { + { + .start = BFIN_UART_THR, + .end = BFIN_UART_GCTL+2, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_UART_TX, + .end = IRQ_UART_TX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART_RX, + .end = IRQ_UART_RX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART_ERROR, + .end = IRQ_UART_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART_TX, + .end = CH_UART_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART_RX, + .end = CH_UART_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static unsigned short bfin_uart0_peripherals[] = { + P_UART0_TX, P_UART0_RX, 0 }; -static struct platform_device bfin_uart_device = { - .name = "bfin-uart", - .id = 1, - .num_resources = ARRAY_SIZE(bfin_uart_resources), - .resource = bfin_uart_resources, +static struct platform_device bfin_uart0_device = { + .name = "bfin-uart", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_uart0_resources), + .resource = bfin_uart0_resources, + .dev = { + .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ + }, }; #endif +#endif -#ifdef CONFIG_SPI_BFIN -#if defined(CONFIG_SND_BLACKFIN_AD1836) \ - || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) -static struct bfin5xx_spi_chip ad1836_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, +#if IS_ENABLED(CONFIG_BFIN_SIR) +#ifdef CONFIG_BFIN_SIR0 +static struct resource bfin_sir0_resources[] = { + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX+1, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device bfin_sir0_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir0_resources), + .resource = bfin_sir0_resources, }; #endif #endif +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) +static struct mtd_partition ezkit_partitions[] = { + { + .name = "bootloader(nor)", + .size = 0x40000, + .offset = 0, + }, { + .name = "linux kernel(nor)", + .size = 0x1C0000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "file system(nor)", + .size = 0x800000 - 0x40000 - 0x1C0000 - 0x2000 * 8, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "config(nor)", + .size = 0x2000 * 7, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "u-boot env(nor)", + .size = 0x2000, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct physmap_flash_data ezkit_flash_data = { + .width = 2, + .parts = ezkit_partitions, + .nr_parts = ARRAY_SIZE(ezkit_partitions), +}; + +static struct resource ezkit_flash_resource = { + .start = 0x20000000, + .end = 0x207fffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device ezkit_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &ezkit_flash_data, + }, + .num_resources = 1, + .resource = &ezkit_flash_resource, +}; +#endif + +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = IRQ_SPI, + .end = IRQ_SPI, + .flags = IORESOURCE_IRQ, + } +}; + /* SPI controller data */ -static struct bfin5xx_spi_master spi_bfin_master_info = { +static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, }; -static struct platform_device spi_bfin_master_device = { - .name = "bfin-spi-master", - .id = 1, /* Bus number */ +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, .dev = { - .platform_data = &spi_bfin_master_info, /* Passed to driver */ + .platform_data = &bfin_spi0_info, /* Passed to driver */ }, }; +#endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_SND_BLACKFIN_AD1836) \ - || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { - .modalias = "ad1836-spi", + .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, - .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, - .controller_data = &ad1836_spi_chip_info, + .bus_num = 0, + .chip_select = 4, + .platform_data = "ad1836", /* only includes chip name for the moment */ + .mode = SPI_MODE_3, + }, +#endif +#if IS_ENABLED(CONFIG_SPI_SPIDEV) + { + .modalias = "spidev", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, + }, +#endif +}; + +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) +#include <linux/input.h> +#include <linux/gpio_keys.h> + +static struct gpio_keys_button bfin_gpio_keys_table[] = { + {BTN_0, GPIO_PF5, 1, "gpio-keys: BTN0"}, + {BTN_1, GPIO_PF6, 1, "gpio-keys: BTN1"}, + {BTN_2, GPIO_PF7, 1, "gpio-keys: BTN2"}, + {BTN_3, GPIO_PF8, 1, "gpio-keys: BTN3"}, +}; + +static struct gpio_keys_platform_data bfin_gpio_keys_data = { + .buttons = bfin_gpio_keys_table, + .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), +}; + +static struct platform_device bfin_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &bfin_gpio_keys_data, + }, +}; +#endif + +#if IS_ENABLED(CONFIG_I2C_GPIO) +#include <linux/i2c-gpio.h> + +static struct i2c_gpio_platform_data i2c_gpio_data = { + .sda_pin = GPIO_PF1, + .scl_pin = GPIO_PF0, + .sda_is_open_drain = 0, + .scl_is_open_drain = 0, + .udelay = 10, +}; + +static struct platform_device i2c_gpio_device = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &i2c_gpio_data, + }, +}; +#endif + +static const unsigned int cclk_vlev_datasheet[] = +{ + VRPAIR(VLEV_085, 250000000), + VRPAIR(VLEV_090, 300000000), + VRPAIR(VLEV_095, 313000000), + VRPAIR(VLEV_100, 350000000), + VRPAIR(VLEV_105, 400000000), + VRPAIR(VLEV_110, 444000000), + VRPAIR(VLEV_115, 450000000), + VRPAIR(VLEV_120, 475000000), + VRPAIR(VLEV_125, 500000000), + VRPAIR(VLEV_130, 600000000), +}; + +static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = { + .tuple_tab = cclk_vlev_datasheet, + .tabsize = ARRAY_SIZE(cclk_vlev_datasheet), + .vr_settling_time = 25 /* us */, +}; + +static struct platform_device bfin_dpmc = { + .name = "bfin dpmc", + .dev = { + .platform_data = &bfin_dmpc_vreg_data, + }, +}; + +#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE) +#include <linux/videodev2.h> +#include <media/blackfin/bfin_capture.h> +#include <media/blackfin/ppi.h> + +static const unsigned short ppi_req[] = { + P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3, + P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7, + P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2, + 0, +}; + +static const struct ppi_info ppi_info = { + .type = PPI_TYPE_PPI, + .dma_ch = CH_PPI0, + .irq_err = IRQ_PPI1_ERROR, + .base = (void __iomem *)PPI0_CONTROL, + .pin_req = ppi_req, +}; + +#if IS_ENABLED(CONFIG_VIDEO_ADV7183) +#include <media/adv7183.h> +static struct v4l2_input adv7183_inputs[] = { + { + .index = 0, + .name = "Composite", + .type = V4L2_INPUT_TYPE_CAMERA, + .std = V4L2_STD_ALL, + .capabilities = V4L2_IN_CAP_STD, + }, + { + .index = 1, + .name = "S-Video", + .type = V4L2_INPUT_TYPE_CAMERA, + .std = V4L2_STD_ALL, + .capabilities = V4L2_IN_CAP_STD, + }, + { + .index = 2, + .name = "Component", + .type = V4L2_INPUT_TYPE_CAMERA, + .std = V4L2_STD_ALL, + .capabilities = V4L2_IN_CAP_STD, + }, +}; + +static struct bcap_route adv7183_routes[] = { + { + .input = ADV7183_COMPOSITE4, + .output = ADV7183_8BIT_OUT, + }, + { + .input = ADV7183_SVIDEO0, + .output = ADV7183_8BIT_OUT, + }, + { + .input = ADV7183_COMPONENT0, + .output = ADV7183_8BIT_OUT, }, +}; + + +static const unsigned adv7183_gpio[] = { + GPIO_PF13, /* reset pin */ + GPIO_PF2, /* output enable pin */ +}; + +static struct bfin_capture_config bfin_capture_data = { + .card_name = "BF561", + .inputs = adv7183_inputs, + .num_inputs = ARRAY_SIZE(adv7183_inputs), + .routes = adv7183_routes, + .i2c_adapter_id = 0, + .board_info = { + .type = "adv7183", + .addr = 0x20, + .platform_data = (void *)adv7183_gpio, + }, + .ppi_info = &ppi_info, + .ppi_control = (PACK_EN | DLEN_8 | DMA32 | FLD_SEL), +}; #endif + +static struct platform_device bfin_capture_device = { + .name = "bfin_capture", + .dev = { + .platform_data = &bfin_capture_data, + }, +}; +#endif + +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) +static struct platform_device bfin_i2s = { + .name = "bfin-i2s", + .id = CONFIG_SND_BF5XX_SPORT_NUM, + /* TODO: add platform data here */ +}; +#endif + +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) +static struct platform_device bfin_ac97 = { + .name = "bfin-ac97", + .id = CONFIG_SND_BF5XX_SPORT_NUM, + /* TODO: add platform data here */ +}; +#endif + +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) +static const char * const ad1836_link[] = { + "bfin-i2s.0", + "spi0.4", +}; +static struct platform_device bfin_ad1836_machine = { + .name = "bfin-snd-ad1836", + .id = -1, + .dev = { + .platform_data = (void *)ad1836_link, + }, }; +#endif static struct platform_device *ezkit_devices[] __initdata = { -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) + + &bfin_dpmc, + +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - &spi_bfin_master_device, + +#if IS_ENABLED(CONFIG_USB_NET2272) + &net2272_bfin_device, +#endif + +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) + &bfin_isp1760_device, +#endif + +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) + &bfin_spi0_device, +#endif + +#if IS_ENABLED(CONFIG_SERIAL_BFIN) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#endif + +#if IS_ENABLED(CONFIG_BFIN_SIR) +#ifdef CONFIG_BFIN_SIR0 + &bfin_sir0_device, +#endif +#endif + +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) + &bfin_device_gpiokeys, +#endif + +#if IS_ENABLED(CONFIG_I2C_GPIO) + &i2c_gpio_device, +#endif + +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) + &isp1362_hcd_device, +#endif + +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) + &ezkit_flash_device, +#endif + +#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE) + &bfin_capture_device, +#endif + +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) + &bfin_i2s, +#endif + +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) + &bfin_ac97, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) - &bfin_uart_device, + +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) + &bfin_ad1836_machine, #endif }; +static int __init net2272_init(void) +{ +#if IS_ENABLED(CONFIG_USB_NET2272) + int ret; + + ret = gpio_request(GPIO_PF11, "net2272"); + if (ret) + return ret; + + /* Reset the USB chip */ + gpio_direction_output(GPIO_PF11, 0); + mdelay(2); + gpio_set_value(GPIO_PF11, 1); +#endif + + return 0; +} + static int __init ezkit_init(void) { int ret; - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); - ret = platform_add_devices(ezkit_devices, - ARRAY_SIZE(ezkit_devices)); + printk(KERN_INFO "%s(): registering device resources\n", __func__); + + ret = platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); if (ret < 0) return ret; - return spi_register_board_info(bfin_spi_board_info, - ARRAY_SIZE(bfin_spi_board_info)); + +#if IS_ENABLED(CONFIG_SMC91X) + bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() | (1 << 12)); + SSYNC(); +#endif + +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) + bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() | (1 << 15)); + bfin_write_FIO0_FLAG_S(1 << 15); + SSYNC(); + /* + * This initialization lasts for approximately 4500 MCLKs. + * MCLK = 12.288MHz + */ + udelay(400); +#endif + + if (net2272_init()) + pr_warning("unable to configure net2272; it probably won't work\n"); + + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); + return 0; } arch_initcall(ezkit_init); + +static struct platform_device *ezkit_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(ezkit_early_devices, + ARRAY_SIZE(ezkit_early_devices)); +} diff --git a/arch/blackfin/mach-bf561/boards/generic_board.c b/arch/blackfin/mach-bf561/boards/generic_board.c deleted file mode 100644 index 585ecdd2f6a..00000000000 --- a/arch/blackfin/mach-bf561/boards/generic_board.c +++ /dev/null @@ -1,82 +0,0 @@ -/* - * File: arch/blackfin/mach-bf561/generic_board.c - * Based on: arch/blackfin/mach-bf533/ezkit.c - * Author: Aidan Williams <aidan@nicta.com.au> - * - * Created: - * Description: - * - * Modified: - * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/device.h> -#include <linux/platform_device.h> -#include <asm/irq.h> - -char *bfin_board_name = "UNKNOWN BOARD"; - -/* - * Driver needs to know address, irq and flag pin. - */ -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) -static struct resource smc91x_resources[] = { - { - .start = 0x2C010300, - .end = 0x2C010300 + 16, - .flags = IORESOURCE_MEM, - },{ - .start = IRQ_PROG_INTB, - .end = IRQ_PROG_INTB, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - },{ - /* - * denotes the flag pin and is used directly if - * CONFIG_IRQCHIP_DEMUX_GPIO is defined. - */ - .start = IRQ_PF9, - .end = IRQ_PF9, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; -#endif - -static struct platform_device *generic_board_devices[] __initdata = { -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) - &smc91x_device, -#endif -}; - -static int __init generic_board_init(void) -{ - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); - return platform_add_devices(generic_board_devices, - ARRAY_SIZE(generic_board_devices)); -} - -arch_initcall(generic_board_init); diff --git a/arch/blackfin/mach-bf561/boards/tepla.c b/arch/blackfin/mach-bf561/boards/tepla.c new file mode 100644 index 00000000000..f87b8cc0cd4 --- /dev/null +++ b/arch/blackfin/mach-bf561/boards/tepla.c @@ -0,0 +1,162 @@ +/* + * Copyright 2004-2007 Analog Devices Inc. + * 2005 National ICT Australia (NICTA) + * Aidan Williams <aidan@nicta.com.au> + * + * Thanks to Jamey Hicks. + * + * Only SMSC91C1111 was registered, may do more later. + * + * Licensed under the GPL-2 + */ + +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/irq.h> + +const char bfin_board_name[] = "Tepla-BF561"; + +/* + * Driver needs to know address, irq and flag pin. + */ +static struct resource smc91x_resources[] = { + { + .start = 0x2C000300, + .end = 0x2C000320, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PROG_INTB, + .end = IRQ_PROG_INTB, + .flags = IORESOURCE_IRQ|IORESOURCE_IRQ_HIGHLEVEL, + }, { + .start = IRQ_PF7, + .end = IRQ_PF7, + .flags = IORESOURCE_IRQ|IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +#if IS_ENABLED(CONFIG_SERIAL_BFIN) +#ifdef CONFIG_SERIAL_BFIN_UART0 +static struct resource bfin_uart0_resources[] = { + { + .start = BFIN_UART_THR, + .end = BFIN_UART_GCTL+2, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_UART_TX, + .end = IRQ_UART_TX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART_RX, + .end = IRQ_UART_RX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART_ERROR, + .end = IRQ_UART_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART_TX, + .end = CH_UART_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART_RX, + .end = CH_UART_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static unsigned short bfin_uart0_peripherals[] = { + P_UART0_TX, P_UART0_RX, 0 +}; + +static struct platform_device bfin_uart0_device = { + .name = "bfin-uart", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_uart0_resources), + .resource = bfin_uart0_resources, + .dev = { + .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ + }, +}; +#endif +#endif + +#if IS_ENABLED(CONFIG_BFIN_SIR) +#ifdef CONFIG_BFIN_SIR0 +static struct resource bfin_sir0_resources[] = { + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX+1, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device bfin_sir0_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir0_resources), + .resource = bfin_sir0_resources, +}; +#endif +#endif + +static struct platform_device *tepla_devices[] __initdata = { + &smc91x_device, + +#if IS_ENABLED(CONFIG_SERIAL_BFIN) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#endif + +#if IS_ENABLED(CONFIG_BFIN_SIR) +#ifdef CONFIG_BFIN_SIR0 + &bfin_sir0_device, +#endif +#endif +}; + +static int __init tepla_init(void) +{ + printk(KERN_INFO "%s(): registering device resources\n", __func__); + return platform_add_devices(tepla_devices, ARRAY_SIZE(tepla_devices)); +} + +arch_initcall(tepla_init); + +static struct platform_device *tepla_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(tepla_early_devices, + ARRAY_SIZE(tepla_early_devices)); +} |