aboutsummaryrefslogtreecommitdiff
path: root/arch/blackfin/mach-bf561/boards
diff options
context:
space:
mode:
Diffstat (limited to 'arch/blackfin/mach-bf561/boards')
-rw-r--r--arch/blackfin/mach-bf561/boards/acvilon.c54
-rw-r--r--arch/blackfin/mach-bf561/boards/cm_bf561.c126
-rw-r--r--arch/blackfin/mach-bf561/boards/ezkit.c241
-rw-r--r--arch/blackfin/mach-bf561/boards/tepla.c17
4 files changed, 273 insertions, 165 deletions
diff --git a/arch/blackfin/mach-bf561/boards/acvilon.c b/arch/blackfin/mach-bf561/boards/acvilon.c
index 0b1c20f14fe..6ab951534d7 100644
--- a/arch/blackfin/mach-bf561/boards/acvilon.c
+++ b/arch/blackfin/mach-bf561/boards/acvilon.c
@@ -44,6 +44,7 @@
#include <linux/spi/flash.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
+#include <linux/gpio.h>
#include <linux/jiffies.h>
#include <linux/i2c-pca-platform.h>
#include <linux/delay.h>
@@ -60,7 +61,7 @@
*/
const char bfin_board_name[] = "Acvilon board";
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
#include <linux/usb/isp1760.h>
static struct resource bfin_isp1760_resources[] = {
[0] = {
@@ -137,7 +138,7 @@ static struct i2c_board_info acvilon_i2c_devs[] __initdata = {
},
};
-#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PLATRAM)
static struct platdata_mtd_ram mtd_ram_data = {
.mapname = "rootfs(RAM)",
.bankwidth = 4,
@@ -160,7 +161,7 @@ static struct platform_device mtd_ram_device = {
};
#endif
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#if IS_ENABLED(CONFIG_SMSC911X)
#include <linux/smsc911x.h>
static struct resource smsc911x_resources[] = {
{
@@ -194,7 +195,7 @@ static struct platform_device smsc911x_device = {
};
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
@@ -203,8 +204,13 @@ static struct resource bfin_uart0_resources[] = {
.flags = IORESOURCE_MEM,
},
{
+ .start = IRQ_UART_TX,
+ .end = IRQ_UART_TX,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
.start = IRQ_UART_RX,
- .end = IRQ_UART_RX + 1,
+ .end = IRQ_UART_RX,
.flags = IORESOURCE_IRQ,
},
{
@@ -224,7 +230,7 @@ static struct resource bfin_uart0_resources[] = {
},
};
-unsigned short bfin_uart0_peripherals[] = {
+static unsigned short bfin_uart0_peripherals[] = {
P_UART0_TX, P_UART0_RX, 0
};
@@ -241,10 +247,7 @@ static struct platform_device bfin_uart0_device = {
#endif
#endif
-#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
-
-#ifdef CONFIG_MTD_PARTITIONS
-const char *part_probes[] = { "cmdlinepart", NULL };
+#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM)
static struct mtd_partition bfin_plat_nand_partitions[] = {
{
@@ -257,7 +260,6 @@ static struct mtd_partition bfin_plat_nand_partitions[] = {
.offset = MTDPART_OFS_APPEND,
},
};
-#endif
#define BFIN_NAND_PLAT_CLE 2
#define BFIN_NAND_PLAT_ALE 3
@@ -286,11 +288,8 @@ static struct platform_nand_data bfin_plat_nand_data = {
.chip = {
.nr_chips = 1,
.chip_delay = 30,
-#ifdef CONFIG_MTD_PARTITIONS
- .part_probe_types = part_probes,
.partitions = bfin_plat_nand_partitions,
.nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions),
-#endif
},
.ctrl = {
.cmd_ctrl = bfin_plat_nand_cmd_ctrl,
@@ -325,7 +324,7 @@ static void bfin_plat_nand_init(void)
}
#endif
-#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE)
+#if IS_ENABLED(CONFIG_MTD_DATAFLASH)
static struct mtd_partition bfin_spi_dataflash_partitions[] = {
{
.name = "bootloader",
@@ -368,18 +367,10 @@ static struct flash_platform_data bfin_spi_dataflash_data = {
/* DataFlash chip */
static struct bfin5xx_spi_chip data_flash_chip_info = {
.enable_dma = 0, /* use dma transfer with this chip */
- .bits_per_word = 8,
-};
-#endif
-
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
-static struct bfin5xx_spi_chip spidev_chip_info = {
- .enable_dma = 0,
- .bits_per_word = 8,
};
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
@@ -418,16 +409,15 @@ static struct platform_device bfin_spi0_device = {
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 3,
- .controller_data = &spidev_chip_info,
},
#endif
-#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE)
+#if IS_ENABLED(CONFIG_MTD_DATAFLASH)
{ /* DataFlash chip */
.modalias = "mtd_dataflash",
.max_speed_hz = 33250000, /* max spi clock (SCK) speed in HZ */
@@ -483,11 +473,11 @@ static struct platform_device bfin_dpmc = {
static struct platform_device *acvilon_devices[] __initdata = {
&bfin_dpmc,
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
@@ -495,17 +485,17 @@ static struct platform_device *acvilon_devices[] __initdata = {
&bfin_gpios_device,
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#if IS_ENABLED(CONFIG_SMSC911X)
&smsc911x_device,
#endif
&bfin_i2c_pca_device,
-#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM)
&bfin_async_nand_device,
#endif
-#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PLATRAM)
&mtd_ram_device,
#endif
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index 087b6b05cc7..e862f7823e6 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -13,11 +13,12 @@
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
#include <linux/usb/isp1362.h>
#endif
#include <linux/ata_platform.h>
#include <linux/irq.h>
+#include <linux/gpio.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/portmux.h>
@@ -29,10 +30,10 @@
*/
const char bfin_board_name[] = "Bluetechnix CM BF561";
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* all SPI peripherals info goes here */
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
@@ -60,34 +61,11 @@ static struct flash_platform_data bfin_spi_flash_data = {
/* SPI flash chip (m25p64) */
static struct bfin5xx_spi_chip spi_flash_chip_info = {
.enable_dma = 0, /* use dma transfer with this chip*/
- .bits_per_word = 8,
-};
-#endif
-
-#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
-/* SPI ADC chip */
-static struct bfin5xx_spi_chip spi_adc_chip_info = {
- .enable_dma = 1, /* use dma transfer with this chip*/
- .bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
-static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
- .enable_dma = 0,
- .bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
-static struct bfin5xx_spi_chip mmc_spi_chip_info = {
- .enable_dma = 0,
- .bits_per_word = 8,
};
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
@@ -100,33 +78,20 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
-#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
- {
- .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
- .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0, /* Framework bus number */
- .chip_select = 1, /* Framework chip select. */
- .platform_data = NULL, /* No spi_driver specific config */
- .controller_data = &spi_adc_chip_info,
- },
-#endif
-
-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
{
.modalias = "ad183x",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 4,
- .controller_data = &ad1836_spi_chip_info,
},
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 1,
- .controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
@@ -170,14 +135,14 @@ static struct platform_device bfin_spi0_device = {
#endif /* spi master and devices */
-#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+#if IS_ENABLED(CONFIG_FB_HITACHI_TX09)
static struct platform_device hitachi_fb_device = {
.name = "hitachi-tx09",
};
#endif
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
@@ -209,7 +174,7 @@ static struct platform_device smc91x_device = {
};
#endif
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#if IS_ENABLED(CONFIG_SMSC911X)
#include <linux/smsc911x.h>
static struct resource smsc911x_resources[] = {
@@ -244,7 +209,7 @@ static struct platform_device smsc911x_device = {
};
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
static struct resource net2272_bfin_resources[] = {
{
.start = 0x24000000,
@@ -265,7 +230,7 @@ static struct platform_device net2272_bfin_device = {
};
#endif
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
static struct resource isp1362_hcd_resources[] = {
{
.start = 0x24008000,
@@ -304,7 +269,7 @@ static struct platform_device isp1362_hcd_device = {
};
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
@@ -313,8 +278,13 @@ static struct resource bfin_uart0_resources[] = {
.flags = IORESOURCE_MEM,
},
{
+ .start = IRQ_UART_TX,
+ .end = IRQ_UART_TX,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
.start = IRQ_UART_RX,
- .end = IRQ_UART_RX+1,
+ .end = IRQ_UART_RX,
.flags = IORESOURCE_IRQ,
},
{
@@ -334,7 +304,7 @@ static struct resource bfin_uart0_resources[] = {
},
};
-unsigned short bfin_uart0_peripherals[] = {
+static unsigned short bfin_uart0_peripherals[] = {
P_UART0_TX, P_UART0_RX, 0
};
@@ -350,7 +320,7 @@ static struct platform_device bfin_uart0_device = {
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
@@ -379,12 +349,12 @@ static struct platform_device bfin_sir0_device = {
#endif
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
#define PATA_INT IRQ_PF46
static struct pata_platform_info bfin_pata_platform_data = {
.ioport_shift = 2,
- .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+ .irq_type = IRQF_TRIGGER_HIGH,
};
static struct resource bfin_pata_resources[] = {
@@ -416,7 +386,7 @@ static struct platform_device bfin_pata_device = {
};
#endif
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
static struct mtd_partition para_partitions[] = {
{
.name = "bootloader(nor)",
@@ -487,62 +457,84 @@ static struct platform_device *cm_bf561_devices[] __initdata = {
&bfin_dpmc,
-#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+#if IS_ENABLED(CONFIG_FB_HITACHI_TX09)
&hitachi_fb_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
&isp1362_hcd_device,
#endif
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#if IS_ENABLED(CONFIG_SMSC911X)
&smsc911x_device,
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
&net2272_bfin_device,
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
&bfin_pata_device,
#endif
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
&para_flash_device,
#endif
};
+static int __init net2272_init(void)
+{
+#if IS_ENABLED(CONFIG_USB_NET2272)
+ int ret;
+
+ ret = gpio_request(GPIO_PF46, "net2272");
+ if (ret)
+ return ret;
+
+ /* Reset USB Chip, PF46 */
+ gpio_direction_output(GPIO_PF46, 0);
+ mdelay(2);
+ gpio_set_value(GPIO_PF46, 1);
+#endif
+
+ return 0;
+}
+
static int __init cm_bf561_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(cm_bf561_devices, ARRAY_SIZE(cm_bf561_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
- irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
+ irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN);
#endif
+
+ if (net2272_init())
+ pr_warning("unable to configure net2272; it probably won't work\n");
+
return 0;
}
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index ab7a487975f..2de71e8c104 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -14,6 +14,7 @@
#include <linux/spi/spi.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
+#include <linux/gpio.h>
#include <linux/delay.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
@@ -25,7 +26,7 @@
*/
const char bfin_board_name[] = "ADI BF561-EZKIT";
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
#include <linux/usb/isp1760.h>
static struct resource bfin_isp1760_resources[] = {
[0] = {
@@ -60,7 +61,7 @@ static struct platform_device bfin_isp1760_device = {
};
#endif
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
#include <linux/usb/isp1362.h>
static struct resource isp1362_hcd_resources[] = {
@@ -101,13 +102,16 @@ static struct platform_device isp1362_hcd_device = {
};
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
static struct resource net2272_bfin_resources[] = {
{
.start = 0x2C000000,
.end = 0x2C000000 + 0x7F,
.flags = IORESOURCE_MEM,
}, {
+ .start = 1,
+ .flags = IORESOURCE_BUS,
+ }, {
.start = IRQ_PF10,
.end = IRQ_PF10,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
@@ -126,7 +130,7 @@ static struct platform_device net2272_bfin_device = {
* USB-LAN EzExtender board
* Driver needs to know address, irq and flag pin.
*/
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
@@ -160,7 +164,7 @@ static struct platform_device smc91x_device = {
};
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
@@ -169,8 +173,13 @@ static struct resource bfin_uart0_resources[] = {
.flags = IORESOURCE_MEM,
},
{
+ .start = IRQ_UART_TX,
+ .end = IRQ_UART_TX,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
.start = IRQ_UART_RX,
- .end = IRQ_UART_RX+1,
+ .end = IRQ_UART_RX,
.flags = IORESOURCE_IRQ,
},
{
@@ -190,7 +199,7 @@ static struct resource bfin_uart0_resources[] = {
},
};
-unsigned short bfin_uart0_peripherals[] = {
+static unsigned short bfin_uart0_peripherals[] = {
P_UART0_TX, P_UART0_RX, 0
};
@@ -206,7 +215,7 @@ static struct platform_device bfin_uart0_device = {
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
@@ -235,7 +244,7 @@ static struct platform_device bfin_sir0_device = {
#endif
#endif
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
static struct mtd_partition ezkit_partitions[] = {
{
.name = "bootloader(nor)",
@@ -247,7 +256,15 @@ static struct mtd_partition ezkit_partitions[] = {
.offset = MTDPART_OFS_APPEND,
}, {
.name = "file system(nor)",
- .size = MTDPART_SIZ_FULL,
+ .size = 0x800000 - 0x40000 - 0x1C0000 - 0x2000 * 8,
+ .offset = MTDPART_OFS_APPEND,
+ }, {
+ .name = "config(nor)",
+ .size = 0x2000 * 7,
+ .offset = MTDPART_OFS_APPEND,
+ }, {
+ .name = "u-boot env(nor)",
+ .size = 0x2000,
.offset = MTDPART_OFS_APPEND,
}
};
@@ -275,22 +292,7 @@ static struct platform_device ezkit_flash_device = {
};
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
- || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
-static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
- .enable_dma = 0,
- .bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
-static struct bfin5xx_spi_chip spidev_chip_info = {
- .enable_dma = 0,
- .bits_per_word = 8,
-};
-#endif
-
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
@@ -329,30 +331,27 @@ static struct platform_device bfin_spi0_device = {
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
- || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
{
.modalias = "ad183x",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 4,
.platform_data = "ad1836", /* only includes chip name for the moment */
- .controller_data = &ad1836_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 1,
- .controller_data = &spidev_chip_info,
},
#endif
};
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
#include <linux/input.h>
#include <linux/gpio_keys.h>
@@ -376,7 +375,7 @@ static struct platform_device bfin_device_gpiokeys = {
};
#endif
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_I2C_GPIO)
#include <linux/i2c-gpio.h>
static struct i2c_gpio_platform_data i2c_gpio_data = {
@@ -384,7 +383,7 @@ static struct i2c_gpio_platform_data i2c_gpio_data = {
.scl_pin = GPIO_PF0,
.sda_is_open_drain = 0,
.scl_is_open_drain = 0,
- .udelay = 40,
+ .udelay = 10,
};
static struct platform_device i2c_gpio_device = {
@@ -423,23 +422,106 @@ static struct platform_device bfin_dpmc = {
},
};
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
-static struct platform_device bfin_i2s = {
- .name = "bfin-i2s",
- .id = CONFIG_SND_BF5XX_SPORT_NUM,
- /* TODO: add platform data here */
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
+#include <linux/videodev2.h>
+#include <media/blackfin/bfin_capture.h>
+#include <media/blackfin/ppi.h>
+
+static const unsigned short ppi_req[] = {
+ P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
+ P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
+ P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
+ 0,
+};
+
+static const struct ppi_info ppi_info = {
+ .type = PPI_TYPE_PPI,
+ .dma_ch = CH_PPI0,
+ .irq_err = IRQ_PPI1_ERROR,
+ .base = (void __iomem *)PPI0_CONTROL,
+ .pin_req = ppi_req,
+};
+
+#if IS_ENABLED(CONFIG_VIDEO_ADV7183)
+#include <media/adv7183.h>
+static struct v4l2_input adv7183_inputs[] = {
+ {
+ .index = 0,
+ .name = "Composite",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .std = V4L2_STD_ALL,
+ .capabilities = V4L2_IN_CAP_STD,
+ },
+ {
+ .index = 1,
+ .name = "S-Video",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .std = V4L2_STD_ALL,
+ .capabilities = V4L2_IN_CAP_STD,
+ },
+ {
+ .index = 2,
+ .name = "Component",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .std = V4L2_STD_ALL,
+ .capabilities = V4L2_IN_CAP_STD,
+ },
+};
+
+static struct bcap_route adv7183_routes[] = {
+ {
+ .input = ADV7183_COMPOSITE4,
+ .output = ADV7183_8BIT_OUT,
+ },
+ {
+ .input = ADV7183_SVIDEO0,
+ .output = ADV7183_8BIT_OUT,
+ },
+ {
+ .input = ADV7183_COMPONENT0,
+ .output = ADV7183_8BIT_OUT,
+ },
+};
+
+
+static const unsigned adv7183_gpio[] = {
+ GPIO_PF13, /* reset pin */
+ GPIO_PF2, /* output enable pin */
+};
+
+static struct bfin_capture_config bfin_capture_data = {
+ .card_name = "BF561",
+ .inputs = adv7183_inputs,
+ .num_inputs = ARRAY_SIZE(adv7183_inputs),
+ .routes = adv7183_routes,
+ .i2c_adapter_id = 0,
+ .board_info = {
+ .type = "adv7183",
+ .addr = 0x20,
+ .platform_data = (void *)adv7183_gpio,
+ },
+ .ppi_info = &ppi_info,
+ .ppi_control = (PACK_EN | DLEN_8 | DMA32 | FLD_SEL),
+};
+#endif
+
+static struct platform_device bfin_capture_device = {
+ .name = "bfin_capture",
+ .dev = {
+ .platform_data = &bfin_capture_data,
+ },
};
#endif
-#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
-static struct platform_device bfin_tdm = {
- .name = "bfin-tdm",
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
+static struct platform_device bfin_i2s = {
+ .name = "bfin-i2s",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
/* TODO: add platform data here */
};
#endif
-#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
static struct platform_device bfin_ac97 = {
.name = "bfin-ac97",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
@@ -447,67 +529,103 @@ static struct platform_device bfin_ac97 = {
};
#endif
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
+static const char * const ad1836_link[] = {
+ "bfin-i2s.0",
+ "spi0.4",
+};
+static struct platform_device bfin_ad1836_machine = {
+ .name = "bfin-snd-ad1836",
+ .id = -1,
+ .dev = {
+ .platform_data = (void *)ad1836_link,
+ },
+};
+#endif
+
static struct platform_device *ezkit_devices[] __initdata = {
&bfin_dpmc,
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
&net2272_bfin_device,
#endif
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
&bfin_isp1760_device,
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
&bfin_device_gpiokeys,
#endif
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_I2C_GPIO)
&i2c_gpio_device,
#endif
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
&isp1362_hcd_device,
#endif
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
&ezkit_flash_device,
#endif
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
- &bfin_i2s,
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
+ &bfin_capture_device,
#endif
-#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
- &bfin_tdm,
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
+ &bfin_i2s,
#endif
-#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
&bfin_ac97,
#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
+ &bfin_ad1836_machine,
+#endif
};
+static int __init net2272_init(void)
+{
+#if IS_ENABLED(CONFIG_USB_NET2272)
+ int ret;
+
+ ret = gpio_request(GPIO_PF11, "net2272");
+ if (ret)
+ return ret;
+
+ /* Reset the USB chip */
+ gpio_direction_output(GPIO_PF11, 0);
+ mdelay(2);
+ gpio_set_value(GPIO_PF11, 1);
+#endif
+
+ return 0;
+}
+
static int __init ezkit_init(void)
{
int ret;
@@ -518,12 +636,12 @@ static int __init ezkit_init(void)
if (ret < 0)
return ret;
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() | (1 << 12));
SSYNC();
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() | (1 << 15));
bfin_write_FIO0_FLAG_S(1 << 15);
SSYNC();
@@ -534,6 +652,9 @@ static int __init ezkit_init(void)
udelay(400);
#endif
+ if (net2272_init())
+ pr_warning("unable to configure net2272; it probably won't work\n");
+
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
return 0;
}
diff --git a/arch/blackfin/mach-bf561/boards/tepla.c b/arch/blackfin/mach-bf561/boards/tepla.c
index d3017e53686..f87b8cc0cd4 100644
--- a/arch/blackfin/mach-bf561/boards/tepla.c
+++ b/arch/blackfin/mach-bf561/boards/tepla.c
@@ -42,7 +42,7 @@ static struct platform_device smc91x_device = {
.resource = smc91x_resources,
};
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
@@ -51,8 +51,13 @@ static struct resource bfin_uart0_resources[] = {
.flags = IORESOURCE_MEM,
},
{
+ .start = IRQ_UART_TX,
+ .end = IRQ_UART_TX,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
.start = IRQ_UART_RX,
- .end = IRQ_UART_RX+1,
+ .end = IRQ_UART_RX,
.flags = IORESOURCE_IRQ,
},
{
@@ -72,7 +77,7 @@ static struct resource bfin_uart0_resources[] = {
},
};
-unsigned short bfin_uart0_peripherals[] = {
+static unsigned short bfin_uart0_peripherals[] = {
P_UART0_TX, P_UART0_RX, 0
};
@@ -88,7 +93,7 @@ static struct platform_device bfin_uart0_device = {
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
@@ -120,13 +125,13 @@ static struct platform_device bfin_sir0_device = {
static struct platform_device *tepla_devices[] __initdata = {
&smc91x_device,
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-15 02:19:58 +0000