diff options
Diffstat (limited to 'arch/blackfin/mach-bf538/boards/ezkit.c')
| -rw-r--r-- | arch/blackfin/mach-bf538/boards/ezkit.c | 186 |
1 files changed, 89 insertions, 97 deletions
diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c index c6fb0a52f84..ae2fcbb0011 100644 --- a/arch/blackfin/mach-bf538/boards/ezkit.c +++ b/arch/blackfin/mach-bf538/boards/ezkit.c @@ -33,14 +33,14 @@ const char bfin_board_name[] = "ADI BF538-EZKIT"; */ -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; -#endif +#endif /* CONFIG_RTC_DRV_BFIN */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -49,8 +49,13 @@ static struct resource bfin_uart0_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART0_TX, + .end = IRQ_UART0_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX+1, + .end = IRQ_UART0_RX, .flags = IORESOURCE_IRQ, }, { @@ -82,7 +87,7 @@ static struct resource bfin_uart0_resources[] = { #endif }; -unsigned short bfin_uart0_peripherals[] = { +static unsigned short bfin_uart0_peripherals[] = { P_UART0_TX, P_UART0_RX, 0 }; @@ -95,7 +100,7 @@ static struct platform_device bfin_uart0_device = { .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ }, }; -#endif +#endif /* CONFIG_SERIAL_BFIN_UART0 */ #ifdef CONFIG_SERIAL_BFIN_UART1 static struct resource bfin_uart1_resources[] = { { @@ -104,8 +109,13 @@ static struct resource bfin_uart1_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART1_TX, + .end = IRQ_UART1_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART1_RX, - .end = IRQ_UART1_RX+1, + .end = IRQ_UART1_RX, .flags = IORESOURCE_IRQ, }, { @@ -125,7 +135,7 @@ static struct resource bfin_uart1_resources[] = { }, }; -unsigned short bfin_uart1_peripherals[] = { +static unsigned short bfin_uart1_peripherals[] = { P_UART1_TX, P_UART1_RX, 0 }; @@ -138,7 +148,7 @@ static struct platform_device bfin_uart1_device = { .platform_data = &bfin_uart1_peripherals, /* Passed to driver */ }, }; -#endif +#endif /* CONFIG_SERIAL_BFIN_UART1 */ #ifdef CONFIG_SERIAL_BFIN_UART2 static struct resource bfin_uart2_resources[] = { { @@ -147,8 +157,13 @@ static struct resource bfin_uart2_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART2_TX, + .end = IRQ_UART2_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART2_RX, - .end = IRQ_UART2_RX+1, + .end = IRQ_UART2_RX, .flags = IORESOURCE_IRQ, }, { @@ -168,7 +183,7 @@ static struct resource bfin_uart2_resources[] = { }, }; -unsigned short bfin_uart2_peripherals[] = { +static unsigned short bfin_uart2_peripherals[] = { P_UART2_TX, P_UART2_RX, 0 }; @@ -181,10 +196,10 @@ static struct platform_device bfin_uart2_device = { .platform_data = &bfin_uart2_peripherals, /* Passed to driver */ }, }; -#endif -#endif +#endif /* CONFIG_SERIAL_BFIN_UART2 */ +#endif /* CONFIG_SERIAL_BFIN */ -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -209,7 +224,7 @@ static struct platform_device bfin_sir0_device = { .num_resources = ARRAY_SIZE(bfin_sir0_resources), .resource = bfin_sir0_resources, }; -#endif +#endif /* CONFIG_BFIN_SIR0 */ #ifdef CONFIG_BFIN_SIR1 static struct resource bfin_sir1_resources[] = { { @@ -234,7 +249,7 @@ static struct platform_device bfin_sir1_device = { .num_resources = ARRAY_SIZE(bfin_sir1_resources), .resource = bfin_sir1_resources, }; -#endif +#endif /* CONFIG_BFIN_SIR1 */ #ifdef CONFIG_BFIN_SIR2 static struct resource bfin_sir2_resources[] = { { @@ -259,10 +274,10 @@ static struct platform_device bfin_sir2_device = { .num_resources = ARRAY_SIZE(bfin_sir2_resources), .resource = bfin_sir2_resources, }; -#endif -#endif +#endif /* CONFIG_BFIN_SIR2 */ +#endif /* CONFIG_BFIN_SIR */ -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -282,9 +297,9 @@ static struct resource bfin_sport0_uart_resources[] = { }, }; -unsigned short bfin_sport0_peripherals[] = { +static unsigned short bfin_sport0_peripherals[] = { P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, - P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 + P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0 }; static struct platform_device bfin_sport0_uart_device = { @@ -296,7 +311,7 @@ static struct platform_device bfin_sport0_uart_device = { .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ }, }; -#endif +#endif /* CONFIG_SERIAL_BFIN_SPORT0_UART */ #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART static struct resource bfin_sport1_uart_resources[] = { { @@ -316,9 +331,9 @@ static struct resource bfin_sport1_uart_resources[] = { }, }; -unsigned short bfin_sport1_peripherals[] = { +static unsigned short bfin_sport1_peripherals[] = { P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, - P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0 + P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0 }; static struct platform_device bfin_sport1_uart_device = { @@ -330,7 +345,7 @@ static struct platform_device bfin_sport1_uart_device = { .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ }, }; -#endif +#endif /* CONFIG_SERIAL_BFIN_SPORT1_UART */ #ifdef CONFIG_SERIAL_BFIN_SPORT2_UART static struct resource bfin_sport2_uart_resources[] = { { @@ -350,7 +365,7 @@ static struct resource bfin_sport2_uart_resources[] = { }, }; -unsigned short bfin_sport2_peripherals[] = { +static unsigned short bfin_sport2_peripherals[] = { P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS, P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0 }; @@ -364,7 +379,7 @@ static struct platform_device bfin_sport2_uart_device = { .platform_data = &bfin_sport2_peripherals, /* Passed to driver */ }, }; -#endif +#endif /* CONFIG_SERIAL_BFIN_SPORT2_UART */ #ifdef CONFIG_SERIAL_BFIN_SPORT3_UART static struct resource bfin_sport3_uart_resources[] = { { @@ -384,7 +399,7 @@ static struct resource bfin_sport3_uart_resources[] = { }, }; -unsigned short bfin_sport3_peripherals[] = { +static unsigned short bfin_sport3_peripherals[] = { P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS, P_SPORT3_DRPRI, P_SPORT3_RSCLK, P_SPORT3_DRSEC, P_SPORT3_DTSEC, 0 }; @@ -398,11 +413,11 @@ static struct platform_device bfin_sport3_uart_device = { .platform_data = &bfin_sport3_peripherals, /* Passed to driver */ }, }; -#endif -#endif +#endif /* CONFIG_SERIAL_BFIN_SPORT3_UART */ +#endif /* CONFIG_SERIAL_BFIN_SPORT */ -#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) -unsigned short bfin_can_peripherals[] = { +#if IS_ENABLED(CONFIG_CAN_BFIN) +static unsigned short bfin_can_peripherals[] = { P_CAN0_RX, P_CAN0_TX, 0 }; @@ -437,13 +452,13 @@ static struct platform_device bfin_can_device = { .platform_data = &bfin_can_peripherals, /* Passed to driver */ }, }; -#endif +#endif /* CONFIG_CAN_BFIN */ /* * USB-LAN EzExtender board * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -473,12 +488,11 @@ static struct platform_device smc91x_device = { .platform_data = &smc91x_info, }, }; -#endif +#endif /* CONFIG_SMC91X */ -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* all SPI peripherals info goes here */ -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) /* SPI flash chip (m25p16) */ static struct mtd_partition bfin_spi_flash_partitions[] = { { @@ -502,11 +516,11 @@ static struct flash_platform_data bfin_spi_flash_data = { static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ - .bits_per_word = 8, }; -#endif +#endif /* CONFIG_MTD_M25P80 */ +#endif /* CONFIG_SPI_BFIN5XX */ -#if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879) #include <linux/spi/ad7879.h> static const struct ad7879_platform_data bfin_ad7879_ts_info = { .model = 7879, /* Model = AD7879 */ @@ -521,16 +535,9 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = { .gpio_export = 1, /* Export GPIO to gpiolib */ .gpio_base = -1, /* Dynamic allocation */ }; -#endif - -#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) -static struct bfin5xx_spi_chip spi_ad7879_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; -#endif +#endif /* CONFIG_TOUCHSCREEN_AD7879 */ -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) #include <asm/bfin-lq035q1.h> static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = { @@ -557,25 +564,10 @@ static struct platform_device bfin_lq035q1_device = { .platform_data = &bfin_lq035q1_data, }, }; -#endif - -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) -static struct bfin5xx_spi_chip spidev_chip_info = { - .enable_dma = 0, - .bits_per_word = 8, -}; -#endif - -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) -static struct bfin5xx_spi_chip lq035q1_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 8, -}; -#endif +#endif /* CONFIG_FB_BFIN_LQ035Q1 */ static struct spi_board_info bf538_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -586,8 +578,8 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = { .controller_data = &spi_flash_chip_info, .mode = SPI_MODE_3, }, -#endif -#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) +#endif /* CONFIG_MTD_M25P80 */ +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI) { .modalias = "ad7879", .platform_data = &bfin_ad7879_ts_info, @@ -595,29 +587,26 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = { .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 1, - .controller_data = &spi_ad7879_chip_info, .mode = SPI_CPHA | SPI_CPOL, }, -#endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#endif /* CONFIG_TOUCHSCREEN_AD7879_SPI */ +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) { .modalias = "bfin-lq035q1-spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 2, - .controller_data = &lq035q1_spi_chip_info, .mode = SPI_CPHA | SPI_CPOL, }, -#endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#endif /* CONFIG_FB_BFIN_LQ035Q1 */ +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 1, - .controller_data = &spidev_chip_info, }, -#endif +#endif /* CONFIG_SPI_SPIDEV */ }; /* SPI (0) */ @@ -726,9 +715,9 @@ static struct platform_device bf538_spi_master2 = { }, }; -#endif /* spi master and devices */ +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) +static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) static struct resource bfin_twi0_resource[] = { [0] = { .start = TWI0_REGBASE, @@ -747,9 +736,13 @@ static struct platform_device i2c_bfin_twi0_device = { .id = 0, .num_resources = ARRAY_SIZE(bfin_twi0_resource), .resource = bfin_twi0_resource, + .dev = { + .platform_data = &bfin_twi0_pins, + }, }; -#if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */ +static const u16 bfin_twi1_pins[] = {P_TWI1_SCL, P_TWI1_SDA, 0}; + static struct resource bfin_twi1_resource[] = { [0] = { .start = TWI1_REGBASE, @@ -769,10 +762,9 @@ static struct platform_device i2c_bfin_twi1_device = { .num_resources = ARRAY_SIZE(bfin_twi1_resource), .resource = bfin_twi1_resource, }; -#endif -#endif +#endif /* CONFIG_I2C_BLACKFIN_TWI */ -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/gpio_keys.h> static struct gpio_keys_button bfin_gpio_keys_table[] = { @@ -820,7 +812,7 @@ static struct platform_device bfin_dpmc = { }, }; -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition ezkit_partitions[] = { { .name = "bootloader(nor)", @@ -845,7 +837,7 @@ static struct physmap_flash_data ezkit_flash_data = { static struct resource ezkit_flash_resource = { .start = 0x20000000, -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) .end = 0x202fffff, #else .end = 0x203fffff, @@ -868,11 +860,11 @@ static struct platform_device *cm_bf538_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -884,18 +876,18 @@ static struct platform_device *cm_bf538_devices[] __initdata = { #endif #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bf538_spi_master0, &bf538_spi_master1, &bf538_spi_master2, #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi0_device, &i2c_bfin_twi1_device, #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -907,7 +899,7 @@ static struct platform_device *cm_bf538_devices[] __initdata = { #endif #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -922,23 +914,23 @@ static struct platform_device *cm_bf538_devices[] __initdata = { #endif #endif -#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) +#if IS_ENABLED(CONFIG_CAN_BFIN) &bfin_can_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) &bfin_lq035q1_device, #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &ezkit_flash_device, #endif }; @@ -948,7 +940,7 @@ static int __init ezkit_init(void) printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf538_devices, ARRAY_SIZE(cm_bf538_devices)); -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) spi_register_board_info(bf538_spi_board_info, ARRAY_SIZE(bf538_spi_board_info)); #endif |