aboutsummaryrefslogtreecommitdiff
path: root/arch/blackfin/mach-bf533
diff options
context:
space:
mode:
Diffstat (limited to 'arch/blackfin/mach-bf533')
-rw-r--r--arch/blackfin/mach-bf533/boards/H8606.c84
-rw-r--r--arch/blackfin/mach-bf533/boards/blackstamp.c62
-rw-r--r--arch/blackfin/mach-bf533/boards/cm_bf533.c90
-rw-r--r--arch/blackfin/mach-bf533/boards/ezkit.c111
-rw-r--r--arch/blackfin/mach-bf533/boards/ip0x.c34
-rw-r--r--arch/blackfin/mach-bf533/boards/stamp.c363
-rw-r--r--arch/blackfin/mach-bf533/include/mach/anomaly.h32
-rw-r--r--arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h52
-rw-r--r--arch/blackfin/mach-bf533/include/mach/defBF532.h2
-rw-r--r--arch/blackfin/mach-bf533/include/mach/irq.h168
10 files changed, 499 insertions, 499 deletions
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index d4bfcea5682..01300f40db1 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -14,7 +14,7 @@
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
#include <linux/usb/isp1362.h>
#endif
#include <linux/irq.h>
@@ -29,7 +29,7 @@
*/
const char bfin_board_name[] = "HV Sistemas H8606";
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
@@ -39,7 +39,7 @@ static struct platform_device rtc_device = {
/*
* Driver needs to know address, irq and flag pin.
*/
- #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+#if IS_ENABLED(CONFIG_DM9000)
static struct resource dm9000_resources[] = {
[0] = {
.start = 0x20300000,
@@ -54,7 +54,8 @@ static struct resource dm9000_resources[] = {
[2] = {
.start = IRQ_PF10,
.end = IRQ_PF10,
- .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | IRQF_SHARED | IRQF_TRIGGER_HIGH),
+ .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+ IORESOURCE_IRQ_SHAREABLE),
},
};
@@ -66,7 +67,7 @@ static struct platform_device dm9000_device = {
};
#endif
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
@@ -103,7 +104,7 @@ static struct platform_device smc91x_device = {
};
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
static struct resource net2272_bfin_resources[] = {
{
.start = 0x20300000,
@@ -124,10 +125,10 @@ static struct platform_device net2272_bfin_device = {
};
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* all SPI peripherals info goes here */
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader (spi)",
@@ -159,29 +160,13 @@ static struct flash_platform_data bfin_spi_flash_data = {
/* SPI flash chip (m25p64) */
static struct bfin5xx_spi_chip spi_flash_chip_info = {
.enable_dma = 0, /* use dma transfer with this chip*/
- .bits_per_word = 8,
-};
-#endif
-
-#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
-/* SPI ADC chip */
-static struct bfin5xx_spi_chip spi_adc_chip_info = {
- .enable_dma = 1, /* use dma transfer with this chip*/
- .bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
-static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
- .enable_dma = 0,
- .bits_per_word = 16,
};
#endif
/* Notice: for blackfin, the speed_hz is the value of register
* SPI_BAUD, not the real baudrate */
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
@@ -195,24 +180,12 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
-#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
- {
- .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
- .max_speed_hz = 4, /* actual baudrate is SCLK/(2xspeed_hz) */
- .bus_num = 1, /* Framework bus number */
- .chip_select = 1, /* Framework chip select. */
- .platform_data = NULL, /* No spi_driver specific config */
- .controller_data = &spi_adc_chip_info,
- },
-#endif
-
-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
{
.modalias = "ad183x",
.max_speed_hz = 16,
.bus_num = 1,
.chip_select = 4,
- .controller_data = &ad1836_spi_chip_info,
},
#endif
@@ -256,7 +229,7 @@ static struct platform_device bfin_spi0_device = {
};
#endif /* spi master and devices */
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
@@ -265,8 +238,13 @@ static struct resource bfin_uart0_resources[] = {
.flags = IORESOURCE_MEM,
},
{
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX + 1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
@@ -302,7 +280,7 @@ static struct platform_device bfin_uart0_device = {
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
@@ -331,7 +309,7 @@ static struct platform_device bfin_sir0_device = {
#endif
#endif
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_8250)
#include <linux/serial_8250.h>
#include <linux/serial.h>
@@ -375,7 +353,7 @@ static struct platform_device serial8250_device = {
#endif
-#if defined(CONFIG_KEYBOARD_OPENCORES) || defined(CONFIG_KEYBOARD_OPENCORES_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_OPENCORES)
/*
* Configuration for one OpenCores keyboard controller in FPGA at address 0x20200030,
@@ -404,43 +382,43 @@ static struct platform_device opencores_kbd_device = {
#endif
static struct platform_device *h8606_devices[] __initdata = {
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+#if IS_ENABLED(CONFIG_DM9000)
&dm9000_device,
#endif
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
&net2272_bfin_device,
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_8250)
&serial8250_device,
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
-#if defined(CONFIG_KEYBOARD_OPENCORES) || defined(CONFIG_KEYBOARD_OPENCORES_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_OPENCORES)
&opencores_kbd_device,
#endif
};
@@ -450,7 +428,7 @@ static int __init H8606_init(void)
printk(KERN_INFO "HV Sistemas H8606 board support by http://www.hvsistemas.com\n");
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(h8606_devices, ARRAY_SIZE(h8606_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#endif
return 0;
diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c
index 87b5af3693c..0ccf0cf4daa 100644
--- a/arch/blackfin/mach-bf533/boards/blackstamp.c
+++ b/arch/blackfin/mach-bf533/boards/blackstamp.c
@@ -20,6 +20,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/irq.h>
+#include <linux/gpio.h>
#include <linux/i2c.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
@@ -31,7 +32,7 @@
*/
const char bfin_board_name[] = "BlackStamp";
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
@@ -41,7 +42,7 @@ static struct platform_device rtc_device = {
/*
* Driver needs to know address, irq and flag pin.
*/
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
@@ -74,7 +75,7 @@ static struct platform_device smc91x_device = {
};
#endif
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
@@ -102,26 +103,17 @@ static struct flash_platform_data bfin_spi_flash_data = {
/* SPI flash chip (m25p64) */
static struct bfin5xx_spi_chip spi_flash_chip_info = {
.enable_dma = 0, /* use dma transfer with this chip*/
- .bits_per_word = 8,
};
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
- .bits_per_word = 8,
-};
-#endif
-
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
-static struct bfin5xx_spi_chip spidev_chip_info = {
- .enable_dma = 0,
- .bits_per_word = 8,
};
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
@@ -134,7 +126,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
@@ -145,18 +137,17 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 7,
- .controller_data = &spidev_chip_info,
},
#endif
};
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
@@ -194,7 +185,7 @@ static struct platform_device bfin_spi0_device = {
};
#endif /* spi master and devices */
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
@@ -203,8 +194,13 @@ static struct resource bfin_uart0_resources[] = {
.flags = IORESOURCE_MEM,
},
{
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX + 1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
@@ -240,7 +236,7 @@ static struct platform_device bfin_uart0_device = {
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
@@ -269,7 +265,7 @@ static struct platform_device bfin_sir0_device = {
#endif
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
@@ -340,7 +336,7 @@ static struct platform_device bfin_sport1_uart_device = {
#endif
#endif
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
#include <linux/input.h>
#include <linux/gpio_keys.h>
@@ -363,7 +359,7 @@ static struct platform_device bfin_device_gpiokeys = {
};
#endif
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_I2C_GPIO)
#include <linux/i2c-gpio.h>
static struct i2c_gpio_platform_data i2c_gpio_data = {
@@ -418,32 +414,32 @@ static struct platform_device *stamp_devices[] __initdata = {
&bfin_dpmc,
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
@@ -452,11 +448,11 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#endif
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
&bfin_device_gpiokeys,
#endif
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_I2C_GPIO)
&i2c_gpio_device,
#endif
};
@@ -474,7 +470,7 @@ static int __init blackstamp_init(void)
if (ret < 0)
return ret;
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
/*
* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC.
* the bfin-async-map driver takes care of flipping between
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index 4d5604eaa7c..4ef2fb0e48d 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -15,7 +15,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/spi/mmc_spi.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
#include <linux/usb/isp1362.h>
#endif
#include <linux/irq.h>
@@ -29,9 +29,9 @@
*/
const char bfin_board_name[] = "Bluetechnix CM BF533";
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* all SPI peripherals info goes here */
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
@@ -59,34 +59,17 @@ static struct flash_platform_data bfin_spi_flash_data = {
/* SPI flash chip (m25p64) */
static struct bfin5xx_spi_chip spi_flash_chip_info = {
.enable_dma = 0, /* use dma transfer with this chip*/
- .bits_per_word = 8,
};
#endif
-/* SPI ADC chip */
-#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
-static struct bfin5xx_spi_chip spi_adc_chip_info = {
- .enable_dma = 1, /* use dma transfer with this chip*/
- .bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
-static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
- .enable_dma = 0,
- .bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
- .bits_per_word = 8,
};
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
@@ -99,28 +82,16 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
-#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
- {
- .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
- .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0, /* Framework bus number */
- .chip_select = 2, /* Framework chip select. */
- .platform_data = NULL, /* No spi_driver specific config */
- .controller_data = &spi_adc_chip_info,
- },
-#endif
-
-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
{
.modalias = "ad183x",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 4,
- .controller_data = &ad1836_spi_chip_info,
},
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
@@ -169,14 +140,14 @@ static struct platform_device bfin_spi0_device = {
};
#endif /* spi master and devices */
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
@@ -207,7 +178,7 @@ static struct platform_device smc91x_device = {
};
#endif
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#if IS_ENABLED(CONFIG_SMSC911X)
#include <linux/smsc911x.h>
static struct resource smsc911x_resources[] = {
@@ -241,7 +212,7 @@ static struct platform_device smsc911x_device = {
};
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
@@ -250,8 +221,13 @@ static struct resource bfin_uart0_resources[] = {
.flags = IORESOURCE_MEM,
},
{
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX + 1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
@@ -287,7 +263,7 @@ static struct platform_device bfin_uart0_device = {
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
@@ -316,7 +292,7 @@ static struct platform_device bfin_sir0_device = {
#endif
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
@@ -387,7 +363,7 @@ static struct platform_device bfin_sport1_uart_device = {
#endif
#endif
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
static struct resource isp1362_hcd_resources[] = {
{
.start = 0x20308000,
@@ -427,7 +403,7 @@ static struct platform_device isp1362_hcd_device = {
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
static struct resource net2272_bfin_resources[] = {
{
.start = 0x20300000,
@@ -450,7 +426,7 @@ static struct platform_device net2272_bfin_device = {
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
static struct mtd_partition para_partitions[] = {
{
.name = "bootloader(nor)",
@@ -519,19 +495,19 @@ static struct platform_device *cm_bf533_devices[] __initdata = {
&bfin_dpmc,
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
@@ -540,31 +516,31 @@ static struct platform_device *cm_bf533_devices[] __initdata = {
#endif
#endif
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
&isp1362_hcd_device,
#endif
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#if IS_ENABLED(CONFIG_SMSC911X)
&smsc911x_device,
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
&net2272_bfin_device,
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
&para_flash_device,
#endif
};
@@ -573,7 +549,7 @@ static int __init cm_bf533_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(cm_bf533_devices, ARRAY_SIZE(cm_bf533_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#endif
return 0;
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index b67b91d8224..3625e9eaa8a 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -14,7 +14,7 @@
#include <linux/mtd/physmap.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
#include <linux/usb/isp1362.h>
#endif
#include <linux/irq.h>
@@ -29,7 +29,7 @@
*/
const char bfin_board_name[] = "ADI BF533-EZKIT";
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
@@ -40,7 +40,7 @@ static struct platform_device rtc_device = {
* USB-LAN EzExtender board
* Driver needs to know address, irq and flag pin.
*/
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
@@ -72,7 +72,7 @@ static struct platform_device smc91x_device = {
};
#endif
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
static struct mtd_partition ezkit_partitions_a[] = {
{
.name = "bootloader(nor a)",
@@ -138,7 +138,7 @@ static struct platform_device ezkit_flash_device_b = {
};
#endif
-#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PLATRAM)
static struct platdata_mtd_ram sram_data_a = {
.mapname = "Flash A SRAM",
.bankwidth = 2,
@@ -182,7 +182,7 @@ static struct platform_device sram_device_b = {
};
#endif
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
@@ -210,34 +210,11 @@ static struct flash_platform_data bfin_spi_flash_data = {
/* SPI flash chip (m25p64) */
static struct bfin5xx_spi_chip spi_flash_chip_info = {
.enable_dma = 0, /* use dma transfer with this chip*/
- .bits_per_word = 8,
-};
-#endif
-
-#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
-/* SPI ADC chip */
-static struct bfin5xx_spi_chip spi_adc_chip_info = {
- .enable_dma = 1, /* use dma transfer with this chip*/
- .bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
-static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
- .enable_dma = 0,
- .bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
-static struct bfin5xx_spi_chip spidev_chip_info = {
- .enable_dma = 0,
- .bits_per_word = 8,
};
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
@@ -250,38 +227,25 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
-#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
- {
- .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
- .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0, /* Framework bus number */
- .chip_select = 1, /* Framework chip select. */
- .platform_data = NULL, /* No spi_driver specific config */
- .controller_data = &spi_adc_chip_info,
- },
-#endif
-
-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
{
.modalias = "ad183x",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 4,
- .controller_data = &ad1836_spi_chip_info,
},
#endif
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 1,
- .controller_data = &spidev_chip_info,
},
#endif
};
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
@@ -319,7 +283,7 @@ static struct platform_device bfin_spi0_device = {
};
#endif /* spi master and devices */
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
@@ -328,8 +292,13 @@ static struct resource bfin_uart0_resources[] = {
.flags = IORESOURCE_MEM,
},
{
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX + 1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
@@ -365,7 +334,7 @@ static struct platform_device bfin_uart0_device = {
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
@@ -394,7 +363,7 @@ static struct platform_device bfin_sir0_device = {
#endif
#endif
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
#include <linux/input.h>
#include <linux/gpio_keys.h>
@@ -418,7 +387,7 @@ static struct platform_device bfin_device_gpiokeys = {
};
#endif
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_I2C_GPIO)
#include <linux/i2c-gpio.h>
static struct i2c_gpio_platform_data i2c_gpio_data = {
@@ -466,14 +435,14 @@ static struct platform_device bfin_dpmc = {
};
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_7393)
{
I2C_BOARD_INFO("bfin-adv7393", 0x2B),
},
#endif
};
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
static struct platform_device bfin_i2s = {
.name = "bfin-i2s",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
@@ -481,15 +450,7 @@ static struct platform_device bfin_i2s = {
};
#endif
-#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
-static struct platform_device bfin_tdm = {
- .name = "bfin-tdm",
- .id = CONFIG_SND_BF5XX_SPORT_NUM,
- /* TODO: add platform data here */
-};
-#endif
-
-#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
static struct platform_device bfin_ac97 = {
.name = "bfin-ac97",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
@@ -501,57 +462,53 @@ static struct platform_device *ezkit_devices[] __initdata = {
&bfin_dpmc,
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
&ezkit_flash_device_a,
&ezkit_flash_device_b,
#endif
-#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PLATRAM)
&sram_device_a,
&sram_device_b,
#endif
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
&bfin_device_gpiokeys,
#endif
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_I2C_GPIO)
&i2c_gpio_device,
#endif
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
&bfin_i2s,
#endif
-#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
- &bfin_tdm,
-#endif
-
-#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
&bfin_ac97,
#endif
};
diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c
index a377d8afea0..39c8e8547b8 100644
--- a/arch/blackfin/mach-bf533/boards/ip0x.c
+++ b/arch/blackfin/mach-bf533/boards/ip0x.c
@@ -15,7 +15,7 @@
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
#include <linux/usb/isp1362.h>
#endif
#include <asm/irq.h>
@@ -32,7 +32,7 @@ const char bfin_board_name[] = "IP04/IP08";
* Driver needs to know address, irq and flag pin.
*/
#if defined(CONFIG_BFIN532_IP0X)
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+#if IS_ENABLED(CONFIG_DM9000)
#include <linux/dm9000.h>
@@ -104,20 +104,19 @@ static struct platform_device dm9000_device2 = {
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* all SPI peripherals info goes here */
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0, /* if 1 - block!!! */
- .bits_per_word = 8,
};
#endif
/* Notice: for blackfin, the speed_hz is the value of register
* SPI_BAUD, not the real baudrate */
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 2,
@@ -143,7 +142,7 @@ static struct platform_device spi_bfin_master_device = {
};
#endif /* spi master and devices */
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
@@ -152,8 +151,13 @@ static struct resource bfin_uart0_resources[] = {
.flags = IORESOURCE_MEM,
},
{
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX + 1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
@@ -189,7 +193,7 @@ static struct platform_device bfin_uart0_device = {
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
@@ -218,7 +222,7 @@ static struct platform_device bfin_sir0_device = {
#endif
#endif
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
static struct resource isp1362_hcd_resources[] = {
{
.start = 0x20300000,
@@ -260,29 +264,29 @@ static struct platform_device isp1362_hcd_device = {
static struct platform_device *ip0x_devices[] __initdata = {
#if defined(CONFIG_BFIN532_IP0X)
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+#if IS_ENABLED(CONFIG_DM9000)
&dm9000_device1,
&dm9000_device2,
#endif
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&spi_bfin_master_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
&isp1362_hcd_device,
#endif
};
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 43224ef00b8..6f4bac969bf 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -14,9 +14,10 @@
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/spi/mmc_spi.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
#include <linux/usb/isp1362.h>
#endif
+#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/i2c.h>
#include <asm/dma.h>
@@ -30,7 +31,7 @@
*/
const char bfin_board_name[] = "ADI BF533-STAMP";
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
@@ -40,7 +41,7 @@ static struct platform_device rtc_device = {
/*
* Driver needs to know address, irq and flag pin.
*/
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
@@ -73,13 +74,16 @@ static struct platform_device smc91x_device = {
};
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
static struct resource net2272_bfin_resources[] = {
{
.start = 0x20300000,
.end = 0x20300000 + 0x100,
.flags = IORESOURCE_MEM,
}, {
+ .start = 1,
+ .flags = IORESOURCE_BUS,
+ }, {
.start = IRQ_PF10,
.end = IRQ_PF10,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
@@ -94,7 +98,7 @@ static struct platform_device net2272_bfin_device = {
};
#endif
-#if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE)
+#if IS_ENABLED(CONFIG_MTD_BFIN_ASYNC)
static struct mtd_partition stamp_partitions[] = {
{
.name = "bootloader(nor)",
@@ -144,7 +148,7 @@ static struct platform_device stamp_flash_device = {
};
#endif
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
@@ -172,33 +176,10 @@ static struct flash_platform_data bfin_spi_flash_data = {
/* SPI flash chip (m25p64) */
static struct bfin5xx_spi_chip spi_flash_chip_info = {
.enable_dma = 0, /* use dma transfer with this chip*/
- .bits_per_word = 8,
};
#endif
-#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
-/* SPI ADC chip */
-static struct bfin5xx_spi_chip spi_adc_chip_info = {
- .enable_dma = 1, /* use dma transfer with this chip*/
- .bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
-static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
- .enable_dma = 0,
- .bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
-static struct bfin5xx_spi_chip spidev_chip_info = {
- .enable_dma = 0,
- .bits_per_word = 8,
-};
-#endif
-
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
#define MMC_SPI_CARD_DETECT_INT IRQ_PF5
static int bfin_mmc_spi_init(struct device *dev,
irqreturn_t (*detect_int)(int, void *), void *data)
@@ -221,13 +202,12 @@ static struct mmc_spi_platform_data bfin_mmc_spi_pdata = {
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
- .bits_per_word = 8,
.pio_interrupt = 0,
};
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
@@ -240,39 +220,26 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
-#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
- {
- .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
- .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0, /* Framework bus number */
- .chip_select = 1, /* Framework chip select. */
- .platform_data = NULL, /* No spi_driver specific config */
- .controller_data = &spi_adc_chip_info,
- },
-#endif
-
-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
{
- .modalias = "ad183x",
+ .modalias = "ad1836",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 4,
.platform_data = "ad1836", /* only includes chip name for the moment */
- .controller_data = &ad1836_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 1,
- .controller_data = &spidev_chip_info,
},
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
@@ -285,7 +252,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
#endif
};
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
@@ -323,7 +290,7 @@ static struct platform_device bfin_spi0_device = {
};
#endif /* spi master and devices */
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
@@ -332,8 +299,13 @@ static struct resource bfin_uart0_resources[] = {
.flags = IORESOURCE_MEM,
},
{
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX + 1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
@@ -369,7 +341,7 @@ static struct platform_device bfin_uart0_device = {
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
@@ -398,7 +370,7 @@ static struct platform_device bfin_sir0_device = {
#endif
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
@@ -469,7 +441,51 @@ static struct platform_device bfin_sport1_uart_device = {
#endif
#endif
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SPORT)
+static struct resource bfin_sport0_resources[] = {
+ {
+ .start = SPORT0_TCR1,
+ .end = SPORT0_MRCS3+4,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_SPORT0_TX,
+ .end = IRQ_SPORT0_TX+1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_SPORT0_RX,
+ .end = IRQ_SPORT0_RX+1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_SPORT0_ERROR,
+ .end = IRQ_SPORT0_ERROR,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = CH_SPORT0_TX,
+ .end = CH_SPORT0_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ {
+ .start = CH_SPORT0_RX,
+ .end = CH_SPORT0_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+static struct platform_device bfin_sport0_device = {
+ .name = "bfin_sport_raw",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bfin_sport0_resources),
+ .resource = bfin_sport0_resources,
+ .dev = {
+ .platform_data = &bfin_sport0_peripherals,
+ },
+};
+#endif
+
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
#include <linux/input.h>
#include <linux/gpio_keys.h>
@@ -492,7 +508,7 @@ static struct platform_device bfin_device_gpiokeys = {
};
#endif
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_I2C_GPIO)
#include <linux/i2c-gpio.h>
static struct i2c_gpio_platform_data i2c_gpio_data = {
@@ -500,7 +516,7 @@ static struct i2c_gpio_platform_data i2c_gpio_data = {
.scl_pin = GPIO_PF3,
.sda_is_open_drain = 0,
.scl_is_open_drain = 0,
- .udelay = 40,
+ .udelay = 10,
};
static struct platform_device i2c_gpio_device = {
@@ -513,29 +529,29 @@ static struct platform_device i2c_gpio_device = {
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
+#if IS_ENABLED(CONFIG_JOYSTICK_AD7142)
{
I2C_BOARD_INFO("ad7142_joystick", 0x2C),
.irq = 39,
},
#endif
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},
#endif
-#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_PCF8574)
{
I2C_BOARD_INFO("pcf8574_keypad", 0x27),
.irq = 39,
},
#endif
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_7393)
{
I2C_BOARD_INFO("bfin-adv7393", 0x2B),
},
#endif
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
{
I2C_BOARD_INFO("ad5252", 0x2f),
},
@@ -569,27 +585,138 @@ static struct platform_device bfin_dpmc = {
},
};
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
-static struct platform_device bfin_i2s = {
- .name = "bfin-i2s",
- .id = CONFIG_SND_BF5XX_SPORT_NUM,
- /* TODO: add platform data here */
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) || \
+ IS_ENABLED(CONFIG_SND_BF5XX_AC97)
+
+#include <asm/bfin_sport.h>
+
+#define SPORT_REQ(x) \
+ [x] = {P_SPORT##x##_TFS, P_SPORT##x##_DTPRI, P_SPORT##x##_TSCLK, \
+ P_SPORT##x##_RFS, P_SPORT##x##_DRPRI, P_SPORT##x##_RSCLK, 0}
+
+static const u16 bfin_snd_pin[][7] = {
+ SPORT_REQ(0),
+ SPORT_REQ(1),
+};
+
+static struct bfin_snd_platform_data bfin_snd_data[] = {
+ {
+ .pin_req = &bfin_snd_pin[0][0],
+ },
+ {
+ .pin_req = &bfin_snd_pin[1][0],
+ },
+};
+
+#define BFIN_SND_RES(x) \
+ [x] = { \
+ { \
+ .start = SPORT##x##_TCR1, \
+ .end = SPORT##x##_TCR1, \
+ .flags = IORESOURCE_MEM \
+ }, \
+ { \
+ .start = CH_SPORT##x##_RX, \
+ .end = CH_SPORT##x##_RX, \
+ .flags = IORESOURCE_DMA, \
+ }, \
+ { \
+ .start = CH_SPORT##x##_TX, \
+ .end = CH_SPORT##x##_TX, \
+ .flags = IORESOURCE_DMA, \
+ }, \
+ { \
+ .start = IRQ_SPORT##x##_ERROR, \
+ .end = IRQ_SPORT##x##_ERROR, \
+ .flags = IORESOURCE_IRQ, \
+ } \
+ }
+
+static struct resource bfin_snd_resources[][4] = {
+ BFIN_SND_RES(0),
+ BFIN_SND_RES(1),
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
+static struct platform_device bfin_i2s_pcm = {
+ .name = "bfin-i2s-pcm-audio",
+ .id = -1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
+static struct platform_device bfin_ac97_pcm = {
+ .name = "bfin-ac97-pcm-audio",
+ .id = -1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
+static const char * const ad1836_link[] = {
+ "bfin-i2s.0",
+ "spi0.4",
+};
+static struct platform_device bfin_ad1836_machine = {
+ .name = "bfin-snd-ad1836",
+ .id = -1,
+ .dev = {
+ .platform_data = (void *)ad1836_link,
+ },
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311)
+static const unsigned ad73311_gpio[] = {
+ GPIO_PF4,
+};
+
+static struct platform_device bfin_ad73311_machine = {
+ .name = "bfin-snd-ad73311",
+ .id = 1,
+ .dev = {
+ .platform_data = (void *)ad73311_gpio,
+ },
};
#endif
-#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
-static struct platform_device bfin_tdm = {
- .name = "bfin-tdm",
+#if IS_ENABLED(CONFIG_SND_SOC_AD73311)
+static struct platform_device bfin_ad73311_codec_device = {
+ .name = "ad73311",
+ .id = -1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_SOC_AD74111)
+static struct platform_device bfin_ad74111_codec_device = {
+ .name = "ad74111",
+ .id = -1,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S)
+static struct platform_device bfin_i2s = {
+ .name = "bfin-i2s",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
- /* TODO: add platform data here */
+ .num_resources =
+ ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
+ .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
+ .dev = {
+ .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
+ },
};
#endif
-#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97)
static struct platform_device bfin_ac97 = {
.name = "bfin-ac97",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
- /* TODO: add platform data here */
+ .num_resources =
+ ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
+ .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
+ .dev = {
+ .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
+ },
};
#endif
@@ -597,35 +724,35 @@ static struct platform_device *stamp_devices[] __initdata = {
&bfin_dpmc,
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
&net2272_bfin_device,
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
@@ -634,31 +761,86 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#endif
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
&bfin_device_gpiokeys,
#endif
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_I2C_GPIO)
&i2c_gpio_device,
#endif
-#if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE)
+#if IS_ENABLED(CONFIG_MTD_BFIN_ASYNC)
&stamp_flash_device,
#endif
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
- &bfin_i2s,
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
+ &bfin_i2s_pcm,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
+ &bfin_ac97_pcm,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
+ &bfin_ad1836_machine,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311)
+ &bfin_ad73311_machine,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_SOC_AD73311)
+ &bfin_ad73311_codec_device,
#endif
-#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
- &bfin_tdm,
+#if IS_ENABLED(CONFIG_SND_SOC_AD74111)
+ &bfin_ad74111_codec_device,
#endif
-#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S)
+ &bfin_i2s,
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97)
&bfin_ac97,
#endif
};
+static int __init net2272_init(void)
+{
+#if IS_ENABLED(CONFIG_USB_NET2272)
+ int ret;
+
+ /* Set PF0 to 0, PF1 to 1 make /AMS3 work properly */
+ ret = gpio_request(GPIO_PF0, "net2272");
+ if (ret)
+ return ret;
+
+ ret = gpio_request(GPIO_PF1, "net2272");
+ if (ret) {
+ gpio_free(GPIO_PF0);
+ return ret;
+ }
+
+ ret = gpio_request(GPIO_PF11, "net2272");
+ if (ret) {
+ gpio_free(GPIO_PF0);
+ gpio_free(GPIO_PF1);
+ return ret;
+ }
+
+ gpio_direction_output(GPIO_PF0, 0);
+ gpio_direction_output(GPIO_PF1, 1);
+
+ /* Reset the USB chip */
+ gpio_direction_output(GPIO_PF11, 0);
+ mdelay(2);
+ gpio_set_value(GPIO_PF11, 1);
+#endif
+
+ return 0;
+}
+
static int __init stamp_init(void)
{
int ret;
@@ -672,7 +854,7 @@ static int __init stamp_init(void)
if (ret < 0)
return ret;
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
/*
* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC.
* the bfin-async-map driver takes care of flipping between
@@ -685,6 +867,9 @@ static int __init stamp_init(void)
}
#endif
+ if (net2272_init())
+ pr_warning("unable to configure net2272; it probably won't work\n");
+
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
return 0;
}
diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h
index 78f87218791..0e754efc3cf 100644
--- a/arch/blackfin/mach-bf533/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h
@@ -5,13 +5,12 @@
* and can be replaced with that version at any time
* DO NOT EDIT THIS FILE
*
- * Copyright 2004-2010 Analog Devices Inc.
- * Licensed under the ADI BSD license.
- * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
+ * Copyright 2004-2011 Analog Devices Inc.
+ * Licensed under the Clear BSD license.
*/
/* This file should be up to date with:
- * - Revision E, 09/18/2008; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List
+ * - Revision G, 05/23/2011; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
@@ -152,7 +151,7 @@
#define ANOMALY_05000277 (__SILICON_REVISION__ < 6)
/* Disabling Peripherals with DMA Running May Cause DMA System Instability */
#define ANOMALY_05000278 (__SILICON_REVISION__ < 6)
-/* False Hardware Error Exception when ISR Context Is Not Restored */
+/* False Hardware Error when ISR Context Is Not Restored */
#define ANOMALY_05000281 (__SILICON_REVISION__ < 6)
/* Memory DMA Corruption with 32-Bit Data and Traffic Control */
#define ANOMALY_05000282 (__SILICON_REVISION__ < 6)
@@ -206,18 +205,29 @@
#define ANOMALY_05000443 (1)
/* False Hardware Error when RETI Points to Invalid Memory */
#define ANOMALY_05000461 (1)
-/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
+/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */
+#define ANOMALY_05000462 (1)
+/* Boot Failure When SDRAM Control Signals Toggle Coming Out Of Reset */
+#define ANOMALY_05000471 (1)
+/* Interrupted SPORT Receive Data Register Read Results In Underflow when SLEN > 15 */
#define ANOMALY_05000473 (1)
-/* Possible Lockup Condition whem Modifying PLL from External Memory */
+/* Possible Lockup Condition when Modifying PLL from External Memory */
#define ANOMALY_05000475 (1)
/* TESTSET Instruction Cannot Be Interrupted */
#define ANOMALY_05000477 (1)
/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */
#define ANOMALY_05000481 (1)
-/* IFLUSH sucks at life */
+/* PLL May Latch Incorrect Values Coming Out of Reset */
+#define ANOMALY_05000489 (1)
+/* Instruction Memory Stalls Can Cause IFLUSH to Fail */
#define ANOMALY_05000491 (1)
+/* EXCPT Instruction May Be Lost If NMI Happens Simultaneously */
+#define ANOMALY_05000494 (1)
+/* RXS Bit in SPI_STAT May Become Stuck In RX DMA Modes */
+#define ANOMALY_05000501 (1)
-/* These anomalies have been "phased" out of analog.com anomaly sheets and are
+/*
+ * These anomalies have been "phased" out of analog.com anomaly sheets and are
* here to show running on older silicon just isn't feasible.
*/
@@ -351,12 +361,14 @@
#define ANOMALY_05000362 (1)
#define ANOMALY_05000364 (0)
#define ANOMALY_05000380 (0)
+#define ANOMALY_05000383 (0)
#define ANOMALY_05000386 (1)
#define ANOMALY_05000389 (0)
#define ANOMALY_05000412 (0)
#define ANOMALY_05000430 (0)
#define ANOMALY_05000432 (0)
#define ANOMALY_05000435 (0)
+#define ANOMALY_05000440 (0)
#define ANOMALY_05000447 (0)
#define ANOMALY_05000448 (0)
#define ANOMALY_05000456 (0)
@@ -364,6 +376,8 @@
#define ANOMALY_05000465 (0)
#define ANOMALY_05000467 (0)
#define ANOMALY_05000474 (0)
+#define ANOMALY_05000480 (0)
#define ANOMALY_05000485 (0)
+#define ANOMALY_16000030 (0)
#endif
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
deleted file mode 100644
index 45dcaa4f3e4..00000000000
--- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright 2006-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later
- */
-
-#include <asm/dma.h>
-#include <asm/portmux.h>
-
-#ifdef CONFIG_BFIN_UART0_CTSRTS
-# define CONFIG_SERIAL_BFIN_CTSRTS
-# ifndef CONFIG_UART0_CTS_PIN
-# define CONFIG_UART0_CTS_PIN -1
-# endif
-# ifndef CONFIG_UART0_RTS_PIN
-# define CONFIG_UART0_RTS_PIN -1
-# endif
-#endif
-
-struct bfin_serial_res {
- unsigned long uart_base_addr;
- int uart_irq;
- int uart_status_irq;
-#ifdef CONFIG_SERIAL_BFIN_DMA
- unsigned int uart_tx_dma_channel;
- unsigned int uart_rx_dma_channel;
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- int uart_cts_pin;
- int uart_rts_pin;
-#endif
-};
-
-struct bfin_serial_res bfin_serial_resource[] = {
- {
- 0xFFC00400,
- IRQ_UART0_RX,
- IRQ_UART0_ERROR,
-#ifdef CONFIG_SERIAL_BFIN_DMA
- CH_UART0_TX,
- CH_UART0_RX,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- CONFIG_UART0_CTS_PIN,
- CONFIG_UART0_RTS_PIN,
-#endif
- }
-};
-
-#define DRIVER_NAME "bfin-uart"
-
-#include <asm/bfin_serial.h>
diff --git a/arch/blackfin/mach-bf533/include/mach/defBF532.h b/arch/blackfin/mach-bf533/include/mach/defBF532.h
index 2376d539351..d438150b102 100644
--- a/arch/blackfin/mach-bf533/include/mach/defBF532.h
+++ b/arch/blackfin/mach-bf533/include/mach/defBF532.h
@@ -3,7 +3,7 @@
*
* Copyright 2005-2010 Analog Devices Inc.
*
- * Licensed under the ADI BSD license or the GPL-2 (or later)
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
*/
#ifndef _DEF_BF532_H
diff --git a/arch/blackfin/mach-bf533/include/mach/irq.h b/arch/blackfin/mach-bf533/include/mach/irq.h
index 1f7e9765d95..70973375414 100644
--- a/arch/blackfin/mach-bf533/include/mach/irq.h
+++ b/arch/blackfin/mach-bf533/include/mach/irq.h
@@ -7,83 +7,36 @@
#ifndef _BF533_IRQ_H_
#define _BF533_IRQ_H_
-/*
- * Interrupt source definitions
- Event Source Core Event Name
-Core Emulation **
- Events (highest priority) EMU 0
- Reset RST 1
- NMI NMI 2
- Exception EVX 3
- Reserved -- 4
- Hardware Error IVHW 5
- Core Timer IVTMR 6 *
- PLL Wakeup Interrupt IVG7 7
- DMA Error (generic) IVG7 8
- PPI Error Interrupt IVG7 9
- SPORT0 Error Interrupt IVG7 10
- SPORT1 Error Interrupt IVG7 11
- SPI Error Interrupt IVG7 12
- UART Error Interrupt IVG7 13
- RTC Interrupt IVG8 14
- DMA0 Interrupt (PPI) IVG8 15
- DMA1 (SPORT0 RX) IVG9 16
- DMA2 (SPORT0 TX) IVG9 17
- DMA3 (SPORT1 RX) IVG9 18
- DMA4 (SPORT1 TX) IVG9 19
- DMA5 (PPI) IVG10 20
- DMA6 (UART RX) IVG10 21
- DMA7 (UART TX) IVG10 22
- Timer0 IVG11 23
- Timer1 IVG11 24
- Timer2 IVG11 25
- PF Interrupt A IVG12 26
- PF Interrupt B IVG12 27
- DMA8/9 Interrupt IVG13 28
- DMA10/11 Interrupt IVG13 29
- Watchdog Timer IVG13 30
+#include <mach-common/irq.h>
- Softirq IVG14 31
- System Call --
- (lowest priority) IVG15 32 *
- */
-#define SYS_IRQS 31
-#define NR_PERI_INTS 24
+#define NR_PERI_INTS 24
-/* The ABSTRACT IRQ definitions */
-/** the first seven of the following are fixed, the rest you change if you need to **/
-#define IRQ_EMU 0 /*Emulation */
-#define IRQ_RST 1 /*reset */
-#define IRQ_NMI 2 /*Non Maskable */
-#define IRQ_EVX 3 /*Exception */
-#define IRQ_UNUSED 4 /*- unused interrupt*/
-#define IRQ_HWERR 5 /*Hardware Error */
-#define IRQ_CORETMR 6 /*Core timer */
+#define IRQ_PLL_WAKEUP BFIN_IRQ(0) /* PLL Wakeup Interrupt */
+#define IRQ_DMA_ERROR BFIN_IRQ(1) /* DMA Error (general) */
+#define IRQ_PPI_ERROR BFIN_IRQ(2) /* PPI Error Interrupt */
+#define IRQ_SPORT0_ERROR BFIN_IRQ(3) /* SPORT0 Error Interrupt */
+#define IRQ_SPORT1_ERROR BFIN_IRQ(4) /* SPORT1 Error Interrupt */
+#define IRQ_SPI_ERROR BFIN_IRQ(5) /* SPI Error Interrupt */
+#define IRQ_UART0_ERROR BFIN_IRQ(6) /* UART Error Interrupt */
+#define IRQ_RTC BFIN_IRQ(7) /* RTC Interrupt */
+#define IRQ_PPI BFIN_IRQ(8) /* DMA0 Interrupt (PPI) */
+#define IRQ_SPORT0_RX BFIN_IRQ(9) /* DMA1 Interrupt (SPORT0 RX) */
+#define IRQ_SPORT0_TX BFIN_IRQ(10) /* DMA2 Interrupt (SPORT0 TX) */
+#define IRQ_SPORT1_RX BFIN_IRQ(11) /* DMA3 Interrupt (SPORT1 RX) */
+#define IRQ_SPORT1_TX BFIN_IRQ(12) /* DMA4 Interrupt (SPORT1 TX) */
+#define IRQ_SPI BFIN_IRQ(13) /* DMA5 Interrupt (SPI) */
+#define IRQ_UART0_RX BFIN_IRQ(14) /* DMA6 Interrupt (UART RX) */
+#define IRQ_UART0_TX BFIN_IRQ(15) /* DMA7 Interrupt (UART TX) */
+#define IRQ_TIMER0 BFIN_IRQ(16) /* Timer 0 */
+#define IRQ_TIMER1 BFIN_IRQ(17) /* Timer 1 */
+#define IRQ_TIMER2 BFIN_IRQ(18) /* Timer 2 */
+#define IRQ_PROG_INTA BFIN_IRQ(19) /* Programmable Flags A (8) */
+#define IRQ_PROG_INTB BFIN_IRQ(20) /* Programmable Flags B (8) */
+#define IRQ_MEM_DMA0 BFIN_IRQ(21) /* DMA8/9 Interrupt (Memory DMA Stream 0) */
+#define IRQ_MEM_DMA1 BFIN_IRQ(22) /* DMA10/11 Interrupt (Memory DMA Stream 1) */
+#define IRQ_WATCH BFIN_IRQ(23) /* Watch Dog Timer */
-#define IRQ_PLL_WAKEUP 7 /*PLL Wakeup Interrupt */
-#define IRQ_DMA_ERROR 8 /*DMA Error (general) */
-#define IRQ_PPI_ERROR 9 /*PPI Error Interrupt */
-#define IRQ_SPORT0_ERROR 10 /*SPORT0 Error Interrupt */
-#define IRQ_SPORT1_ERROR 11 /*SPORT1 Error Interrupt */
-#define IRQ_SPI_ERROR 12 /*SPI Error Interrupt */
-#define IRQ_UART0_ERROR 13 /*UART Error Interrupt */
-#define IRQ_RTC 14 /*RTC Interrupt */
-#define IRQ_PPI 15 /*DMA0 Interrupt (PPI) */
-#define IRQ_SPORT0_RX 16 /*DMA1 Interrupt (SPORT0 RX) */
-#define IRQ_SPORT0_TX 17 /*DMA2 Interrupt (SPORT0 TX) */
-#define IRQ_SPORT1_RX 18 /*DMA3 Interrupt (SPORT1 RX) */
-#define IRQ_SPORT1_TX 19 /*DMA4 Interrupt (SPORT1 TX) */
-#define IRQ_SPI 20 /*DMA5 Interrupt (SPI) */
-#define IRQ_UART0_RX 21 /*DMA6 Interrupt (UART RX) */
-#define IRQ_UART0_TX 22 /*DMA7 Interrupt (UART TX) */
-#define IRQ_TIMER0 23 /*Timer 0 */
-#define IRQ_TIMER1 24 /*Timer 1 */
-#define IRQ_TIMER2 25 /*Timer 2 */
-#define IRQ_PROG_INTA 26 /*Programmable Flags A (8) */
-#define IRQ_PROG_INTB 27 /*Programmable Flags B (8) */
-#define IRQ_MEM_DMA0 28 /*DMA8/9 Interrupt (Memory DMA Stream 0) */
-#define IRQ_MEM_DMA1 29 /*DMA10/11 Interrupt (Memory DMA Stream 1) */
-#define IRQ_WATCH 30 /*Watch Dog Timer */
+#define SYS_IRQS 31
#define IRQ_PF0 33
#define IRQ_PF1 34
@@ -105,46 +58,35 @@ Core Emulation **
#define GPIO_IRQ_BASE IRQ_PF0
#define NR_MACH_IRQS (IRQ_PF15 + 1)
-#define NR_IRQS (NR_MACH_IRQS + NR_SPARE_IRQS)
-
-#define IVG7 7
-#define IVG8 8
-#define IVG9 9
-#define IVG10 10
-#define IVG11 11
-#define IVG12 12
-#define IVG13 13
-#define IVG14 14
-#define IVG15 15
-/* IAR0 BIT FIELDS*/
-#define RTC_ERROR_POS 28
-#define UART_ERROR_POS 24
-#define SPORT1_ERROR_POS 20
-#define SPI_ERROR_POS 16
-#define SPORT0_ERROR_POS 12
-#define PPI_ERROR_POS 8
-#define DMA_ERROR_POS 4
-#define PLLWAKE_ERROR_POS 0
+/* IAR0 BIT FIELDS */
+#define RTC_ERROR_POS 28
+#define UART_ERROR_POS 24
+#define SPORT1_ERROR_POS 20
+#define SPI_ERROR_POS 16
+#define SPORT0_ERROR_POS 12
+#define PPI_ERROR_POS 8
+#define DMA_ERROR_POS 4
+#define PLLWAKE_ERROR_POS 0
-/* IAR1 BIT FIELDS*/
-#define DMA7_UARTTX_POS 28
-#define DMA6_UARTRX_POS 24
-#define DMA5_SPI_POS 20
-#define DMA4_SPORT1TX_POS 16
-#define DMA3_SPORT1RX_POS 12
-#define DMA2_SPORT0TX_POS 8
-#define DMA1_SPORT0RX_POS 4
-#define DMA0_PPI_POS 0
+/* IAR1 BIT FIELDS */
+#define DMA7_UARTTX_POS 28
+#define DMA6_UARTRX_POS 24
+#define DMA5_SPI_POS 20
+#define DMA4_SPORT1TX_POS 16
+#define DMA3_SPORT1RX_POS 12
+#define DMA2_SPORT0TX_POS 8
+#define DMA1_SPORT0RX_POS 4
+#define DMA0_PPI_POS 0
-/* IAR2 BIT FIELDS*/
-#define WDTIMER_POS 28
-#define MEMDMA1_POS 24
-#define MEMDMA0_POS 20
-#define PFB_POS 16
-#define PFA_POS 12
-#define TIMER2_POS 8
-#define TIMER1_POS 4
-#define TIMER0_POS 0
+/* IAR2 BIT FIELDS */
+#define WDTIMER_POS 28
+#define MEMDMA1_POS 24
+#define MEMDMA0_POS 20
+#define PFB_POS 16
+#define PFA_POS 12
+#define TIMER2_POS 8
+#define TIMER1_POS 4
+#define TIMER0_POS 0
-#endif /* _BF533_IRQ_H_ */
+#endif
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-15 02:18:56 +0000