aboutsummaryrefslogtreecommitdiff
path: root/arch/blackfin/mach-bf533/include
diff options
context:
space:
mode:
Diffstat (limited to 'arch/blackfin/mach-bf533/include')
-rw-r--r--arch/blackfin/mach-bf533/include/mach/anomaly.h36
-rw-r--r--arch/blackfin/mach-bf533/include/mach/bfin_serial.h14
-rw-r--r--arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h122
-rw-r--r--arch/blackfin/mach-bf533/include/mach/blackfin.h30
-rw-r--r--arch/blackfin/mach-bf533/include/mach/cdefBF532.h154
-rw-r--r--arch/blackfin/mach-bf533/include/mach/defBF532.h292
-rw-r--r--arch/blackfin/mach-bf533/include/mach/gpio.h34
-rw-r--r--arch/blackfin/mach-bf533/include/mach/irq.h168
-rw-r--r--arch/blackfin/mach-bf533/include/mach/pll.h1
-rw-r--r--arch/blackfin/mach-bf533/include/mach/portmux.h3
10 files changed, 177 insertions, 677 deletions
diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h
index 9b3f7a27714..0e754efc3cf 100644
--- a/arch/blackfin/mach-bf533/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h
@@ -5,13 +5,12 @@
* and can be replaced with that version at any time
* DO NOT EDIT THIS FILE
*
- * Copyright 2004-2009 Analog Devices Inc.
- * Licensed under the ADI BSD license.
- * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
+ * Copyright 2004-2011 Analog Devices Inc.
+ * Licensed under the Clear BSD license.
*/
/* This file should be up to date with:
- * - Revision E, 09/18/2008; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List
+ * - Revision G, 05/23/2011; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
@@ -152,7 +151,7 @@
#define ANOMALY_05000277 (__SILICON_REVISION__ < 6)
/* Disabling Peripherals with DMA Running May Cause DMA System Instability */
#define ANOMALY_05000278 (__SILICON_REVISION__ < 6)
-/* False Hardware Error Exception when ISR Context Is Not Restored */
+/* False Hardware Error when ISR Context Is Not Restored */
#define ANOMALY_05000281 (__SILICON_REVISION__ < 6)
/* Memory DMA Corruption with 32-Bit Data and Traffic Control */
#define ANOMALY_05000282 (__SILICON_REVISION__ < 6)
@@ -206,12 +205,29 @@
#define ANOMALY_05000443 (1)
/* False Hardware Error when RETI Points to Invalid Memory */
#define ANOMALY_05000461 (1)
-/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
+/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */
+#define ANOMALY_05000462 (1)
+/* Boot Failure When SDRAM Control Signals Toggle Coming Out Of Reset */
+#define ANOMALY_05000471 (1)
+/* Interrupted SPORT Receive Data Register Read Results In Underflow when SLEN > 15 */
#define ANOMALY_05000473 (1)
+/* Possible Lockup Condition when Modifying PLL from External Memory */
+#define ANOMALY_05000475 (1)
/* TESTSET Instruction Cannot Be Interrupted */
#define ANOMALY_05000477 (1)
+/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */
+#define ANOMALY_05000481 (1)
+/* PLL May Latch Incorrect Values Coming Out of Reset */
+#define ANOMALY_05000489 (1)
+/* Instruction Memory Stalls Can Cause IFLUSH to Fail */
+#define ANOMALY_05000491 (1)
+/* EXCPT Instruction May Be Lost If NMI Happens Simultaneously */
+#define ANOMALY_05000494 (1)
+/* RXS Bit in SPI_STAT May Become Stuck In RX DMA Modes */
+#define ANOMALY_05000501 (1)
-/* These anomalies have been "phased" out of analog.com anomaly sheets and are
+/*
+ * These anomalies have been "phased" out of analog.com anomaly sheets and are
* here to show running on older silicon just isn't feasible.
*/
@@ -345,12 +361,14 @@
#define ANOMALY_05000362 (1)
#define ANOMALY_05000364 (0)
#define ANOMALY_05000380 (0)
+#define ANOMALY_05000383 (0)
#define ANOMALY_05000386 (1)
#define ANOMALY_05000389 (0)
#define ANOMALY_05000412 (0)
#define ANOMALY_05000430 (0)
#define ANOMALY_05000432 (0)
#define ANOMALY_05000435 (0)
+#define ANOMALY_05000440 (0)
#define ANOMALY_05000447 (0)
#define ANOMALY_05000448 (0)
#define ANOMALY_05000456 (0)
@@ -358,6 +376,8 @@
#define ANOMALY_05000465 (0)
#define ANOMALY_05000467 (0)
#define ANOMALY_05000474 (0)
-#define ANOMALY_05000475 (0)
+#define ANOMALY_05000480 (0)
+#define ANOMALY_05000485 (0)
+#define ANOMALY_16000030 (0)
#endif
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial.h
new file mode 100644
index 00000000000..08072c86d5d
--- /dev/null
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial.h
@@ -0,0 +1,14 @@
+/*
+ * mach/bfin_serial.h - Blackfin UART/Serial definitions
+ *
+ * Copyright 2006-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFIN_MACH_SERIAL_H__
+#define __BFIN_MACH_SERIAL_H__
+
+#define BFIN_UART_NR_PORTS 1
+
+#endif
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
deleted file mode 100644
index 9e1f3defb6b..00000000000
--- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * Copyright 2006-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later
- */
-
-#include <linux/serial.h>
-#include <asm/dma.h>
-#include <asm/portmux.h>
-
-#define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR))
-#define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL))
-#define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER))
-#define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH))
-#define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR))
-#define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR))
-#define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL))
-
-#define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v)
-#define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v)
-#define UART_PUT_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER),v)
-#define UART_SET_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) | (v))
-#define UART_CLEAR_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v))
-#define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v)
-#define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v)
-#define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
-
-#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
-#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
-
-#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
-#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
-#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
-#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
-#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
-
-#ifdef CONFIG_BFIN_UART0_CTSRTS
-# define CONFIG_SERIAL_BFIN_CTSRTS
-# ifndef CONFIG_UART0_CTS_PIN
-# define CONFIG_UART0_CTS_PIN -1
-# endif
-# ifndef CONFIG_UART0_RTS_PIN
-# define CONFIG_UART0_RTS_PIN -1
-# endif
-#endif
-
-#define BFIN_UART_TX_FIFO_SIZE 2
-
-struct bfin_serial_port {
- struct uart_port port;
- unsigned int old_status;
- int status_irq;
- unsigned int lsr;
-#ifdef CONFIG_SERIAL_BFIN_DMA
- int tx_done;
- int tx_count;
- struct circ_buf rx_dma_buf;
- struct timer_list rx_dma_timer;
- int rx_dma_nrows;
- unsigned int tx_dma_channel;
- unsigned int rx_dma_channel;
- struct work_struct tx_dma_workqueue;
-#else
-# if ANOMALY_05000363
- unsigned int anomaly_threshold;
-# endif
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- struct timer_list cts_timer;
- int cts_pin;
- int rts_pin;
-#endif
-};
-
-/* The hardware clears the LSR bits upon read, so we need to cache
- * some of the more fun bits in software so they don't get lost
- * when checking the LSR in other code paths (TX).
- */
-static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart)
-{
- unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR);
- uart->lsr |= (lsr & (BI|FE|PE|OE));
- return lsr | uart->lsr;
-}
-
-static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
-{
- uart->lsr = 0;
- bfin_write16(uart->port.membase + OFFSET_LSR, -1);
-}
-
-struct bfin_serial_res {
- unsigned long uart_base_addr;
- int uart_irq;
- int uart_status_irq;
-#ifdef CONFIG_SERIAL_BFIN_DMA
- unsigned int uart_tx_dma_channel;
- unsigned int uart_rx_dma_channel;
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- int uart_cts_pin;
- int uart_rts_pin;
-#endif
-};
-
-struct bfin_serial_res bfin_serial_resource[] = {
- {
- 0xFFC00400,
- IRQ_UART0_RX,
- IRQ_UART0_ERROR,
-#ifdef CONFIG_SERIAL_BFIN_DMA
- CH_UART0_TX,
- CH_UART0_RX,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- CONFIG_UART0_CTS_PIN,
- CONFIG_UART0_RTS_PIN,
-#endif
- }
-};
-
-#define DRIVER_NAME "bfin-uart"
diff --git a/arch/blackfin/mach-bf533/include/mach/blackfin.h b/arch/blackfin/mach-bf533/include/mach/blackfin.h
index f4bd6df5d96..e366207fbf1 100644
--- a/arch/blackfin/mach-bf533/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf533/include/mach/blackfin.h
@@ -1,7 +1,7 @@
/*
- * Copyright 2005-2009 Analog Devices Inc.
+ * Copyright 2005-2010 Analog Devices Inc.
*
- * Licensed under the GPL-2 or later
+ * Licensed under the GPL-2 or later.
*/
#ifndef _MACH_BLACKFIN_H_
@@ -10,26 +10,14 @@
#define BF533_FAMILY
#include "bf533.h"
-#include "defBF532.h"
#include "anomaly.h"
-#if !defined(__ASSEMBLY__)
-#include "cdefBF532.h"
-#endif
-
-#define BFIN_UART_NR_PORTS 1
+#include <asm/def_LPBlackfin.h>
+#include "defBF532.h"
-#define OFFSET_THR 0x00 /* Transmit Holding register */
-#define OFFSET_RBR 0x00 /* Receive Buffer register */
-#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */
-#define OFFSET_IER 0x04 /* Interrupt Enable Register */
-#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */
-#define OFFSET_IIR 0x08 /* Interrupt Identification Register */
-#define OFFSET_LCR 0x0C /* Line Control Register */
-#define OFFSET_MCR 0x10 /* Modem Control Register */
-#define OFFSET_LSR 0x14 /* Line Status Register */
-#define OFFSET_MSR 0x18 /* Modem Status Register */
-#define OFFSET_SCR 0x1C /* SCR Scratch Register */
-#define OFFSET_GCTL 0x24 /* Global Control Register */
+#ifndef __ASSEMBLY__
+# include <asm/cdef_LPBlackfin.h>
+# include "cdefBF532.h"
+#endif
-#endif /* _MACH_BLACKFIN_H_ */
+#endif
diff --git a/arch/blackfin/mach-bf533/include/mach/cdefBF532.h b/arch/blackfin/mach-bf533/include/mach/cdefBF532.h
index feb2392c43e..fd0cbe4df21 100644
--- a/arch/blackfin/mach-bf533/include/mach/cdefBF532.h
+++ b/arch/blackfin/mach-bf533/include/mach/cdefBF532.h
@@ -1,5 +1,5 @@
/*
- * Copyright 2005-2008 Analog Devices Inc.
+ * Copyright 2005-2010 Analog Devices Inc.
*
* Licensed under the GPL-2 or later
*/
@@ -7,14 +7,6 @@
#ifndef _CDEF_BF532_H
#define _CDEF_BF532_H
-#include <asm/blackfin.h>
-
-/*include all Core registers and bit definitions*/
-#include "defBF532.h"
-
-/*include core specific register pointer definitions*/
-#include <asm/cdef_LPBlackfin.h>
-
/* Clock and System Control (0xFFC0 0400-0xFFC0 07FF) */
#define bfin_read_PLL_CTL() bfin_read16(PLL_CTL)
#define bfin_read_PLL_STAT() bfin_read16(PLL_STAT)
@@ -71,16 +63,10 @@
#define bfin_write_RTC_PREN(val) bfin_write16(RTC_PREN,val)
/* DMA Traffic controls */
-#define bfin_read_DMA_TCPER() bfin_read16(DMA_TCPER)
-#define bfin_write_DMA_TCPER(val) bfin_write16(DMA_TCPER,val)
-#define bfin_read_DMA_TCCNT() bfin_read16(DMA_TCCNT)
-#define bfin_write_DMA_TCCNT(val) bfin_write16(DMA_TCCNT,val)
-
-/* Alternate deprecated register names (below) provided for backwards code compatibility */
-#define bfin_read_DMA_TC_PER() bfin_read16(DMA_TC_PER)
-#define bfin_write_DMA_TC_PER(val) bfin_write16(DMA_TC_PER,val)
-#define bfin_read_DMA_TC_CNT() bfin_read16(DMA_TC_CNT)
-#define bfin_write_DMA_TC_CNT(val) bfin_write16(DMA_TC_CNT,val)
+#define bfin_read_DMAC_TC_PER() bfin_read16(DMAC_TC_PER)
+#define bfin_write_DMAC_TC_PER(val) bfin_write16(DMAC_TC_PER,val)
+#define bfin_read_DMAC_TC_CNT() bfin_read16(DMAC_TC_CNT)
+#define bfin_write_DMAC_TC_CNT(val) bfin_write16(DMAC_TC_CNT,val)
/* General Purpose IO (0xFFC0 2400-0xFFC0 27FF) */
#define bfin_read_FIO_DIR() bfin_read16(FIO_DIR)
@@ -110,6 +96,47 @@
#define bfin_read_FIO_MASKB_T() bfin_read16(FIO_MASKB_T)
#define bfin_write_FIO_MASKB_T(val) bfin_write16(FIO_MASKB_T,val)
+#if ANOMALY_05000311
+/* Keep at the CPP expansion to avoid circular header dependency loops */
+#define BFIN_WRITE_FIO_FLAG(name, val) \
+ do { \
+ unsigned long __flags; \
+ __flags = hard_local_irq_save(); \
+ bfin_write16(FIO_FLAG_##name, val); \
+ bfin_read_CHIPID(); \
+ hard_local_irq_restore(__flags); \
+ } while (0)
+#define bfin_write_FIO_FLAG_D(val) BFIN_WRITE_FIO_FLAG(D, val)
+#define bfin_write_FIO_FLAG_C(val) BFIN_WRITE_FIO_FLAG(C, val)
+#define bfin_write_FIO_FLAG_S(val) BFIN_WRITE_FIO_FLAG(S, val)
+#define bfin_write_FIO_FLAG_T(val) BFIN_WRITE_FIO_FLAG(T, val)
+
+#define BFIN_READ_FIO_FLAG(name) \
+ ({ \
+ unsigned long __flags; \
+ u16 __ret; \
+ __flags = hard_local_irq_save(); \
+ __ret = bfin_read16(FIO_FLAG_##name); \
+ bfin_read_CHIPID(); \
+ hard_local_irq_restore(__flags); \
+ __ret; \
+ })
+#define bfin_read_FIO_FLAG_D() BFIN_READ_FIO_FLAG(D)
+#define bfin_read_FIO_FLAG_C() BFIN_READ_FIO_FLAG(C)
+#define bfin_read_FIO_FLAG_S() BFIN_READ_FIO_FLAG(S)
+#define bfin_read_FIO_FLAG_T() BFIN_READ_FIO_FLAG(T)
+
+#else
+#define bfin_write_FIO_FLAG_D(val) bfin_write16(FIO_FLAG_D, val)
+#define bfin_write_FIO_FLAG_C(val) bfin_write16(FIO_FLAG_C, val)
+#define bfin_write_FIO_FLAG_S(val) bfin_write16(FIO_FLAG_S, val)
+#define bfin_write_FIO_FLAG_T(val) bfin_write16(FIO_FLAG_T, val)
+#define bfin_read_FIO_FLAG_D() bfin_read16(FIO_FLAG_D)
+#define bfin_read_FIO_FLAG_C() bfin_read16(FIO_FLAG_C)
+#define bfin_read_FIO_FLAG_S() bfin_read16(FIO_FLAG_S)
+#define bfin_read_FIO_FLAG_T() bfin_read16(FIO_FLAG_T)
+#endif
+
/* DMA Controller */
#define bfin_read_DMA0_CONFIG() bfin_read16(DMA0_CONFIG)
#define bfin_write_DMA0_CONFIG(val) bfin_write16(DMA0_CONFIG,val)
@@ -652,93 +679,4 @@
#define bfin_read_PPI_FRAME() bfin_read16(PPI_FRAME)
#define bfin_write_PPI_FRAME(val) bfin_write16(PPI_FRAME,val)
-/* These need to be last due to the cdef/linux inter-dependencies */
-#include <asm/irq.h>
-
-#if ANOMALY_05000311
-#define BFIN_WRITE_FIO_FLAG(name) \
-static inline void bfin_write_FIO_FLAG_##name(unsigned short val) \
-{ \
- unsigned long flags; \
- local_irq_save_hw(flags); \
- bfin_write16(FIO_FLAG_##name, val); \
- bfin_read_CHIPID(); \
- local_irq_restore_hw(flags); \
-}
-BFIN_WRITE_FIO_FLAG(D)
-BFIN_WRITE_FIO_FLAG(C)
-BFIN_WRITE_FIO_FLAG(S)
-BFIN_WRITE_FIO_FLAG(T)
-
-#define BFIN_READ_FIO_FLAG(name) \
-static inline u16 bfin_read_FIO_FLAG_##name(void) \
-{ \
- unsigned long flags; \
- u16 ret; \
- local_irq_save_hw(flags); \
- ret = bfin_read16(FIO_FLAG_##name); \
- bfin_read_CHIPID(); \
- local_irq_restore_hw(flags); \
- return ret; \
-}
-BFIN_READ_FIO_FLAG(D)
-BFIN_READ_FIO_FLAG(C)
-BFIN_READ_FIO_FLAG(S)
-BFIN_READ_FIO_FLAG(T)
-
-#else
-#define bfin_write_FIO_FLAG_D(val) bfin_write16(FIO_FLAG_D, val)
-#define bfin_write_FIO_FLAG_C(val) bfin_write16(FIO_FLAG_C, val)
-#define bfin_write_FIO_FLAG_S(val) bfin_write16(FIO_FLAG_S, val)
-#define bfin_write_FIO_FLAG_T(val) bfin_write16(FIO_FLAG_T, val)
-#define bfin_read_FIO_FLAG_T() bfin_read16(FIO_FLAG_T)
-#define bfin_read_FIO_FLAG_C() bfin_read16(FIO_FLAG_C)
-#define bfin_read_FIO_FLAG_S() bfin_read16(FIO_FLAG_S)
-#define bfin_read_FIO_FLAG_D() bfin_read16(FIO_FLAG_D)
-#endif
-
-/* Writing to PLL_CTL initiates a PLL relock sequence. */
-static __inline__ void bfin_write_PLL_CTL(unsigned int val)
-{
- unsigned long flags, iwr;
-
- if (val == bfin_read_PLL_CTL())
- return;
-
- local_irq_save_hw(flags);
- /* Enable the PLL Wakeup bit in SIC IWR */
- iwr = bfin_read32(SIC_IWR);
- /* Only allow PPL Wakeup) */
- bfin_write32(SIC_IWR, IWR_ENABLE(0));
-
- bfin_write16(PLL_CTL, val);
- SSYNC();
- asm("IDLE;");
-
- bfin_write32(SIC_IWR, iwr);
- local_irq_restore_hw(flags);
-}
-
-/* Writing to VR_CTL initiates a PLL relock sequence. */
-static __inline__ void bfin_write_VR_CTL(unsigned int val)
-{
- unsigned long flags, iwr;
-
- if (val == bfin_read_VR_CTL())
- return;
-
- local_irq_save_hw(flags);
- /* Enable the PLL Wakeup bit in SIC IWR */
- iwr = bfin_read32(SIC_IWR);
- /* Only allow PPL Wakeup) */
- bfin_write32(SIC_IWR, IWR_ENABLE(0));
-
- bfin_write16(VR_CTL, val);
- SSYNC();
- asm("IDLE;");
-
- bfin_write32(SIC_IWR, iwr);
- local_irq_restore_hw(flags);
-}
-
#endif /* _CDEF_BF532_H */
diff --git a/arch/blackfin/mach-bf533/include/mach/defBF532.h b/arch/blackfin/mach-bf533/include/mach/defBF532.h
index e9ff491c095..d438150b102 100644
--- a/arch/blackfin/mach-bf533/include/mach/defBF532.h
+++ b/arch/blackfin/mach-bf533/include/mach/defBF532.h
@@ -1,17 +1,14 @@
/*
* System & MMR bit and Address definitions for ADSP-BF532
*
- * Copyright 2005-2008 Analog Devices Inc.
+ * Copyright 2005-2010 Analog Devices Inc.
*
- * Licensed under the ADI BSD license or the GPL-2 (or later)
+ * Licensed under the Clear BSD license or the GPL-2 (or later)
*/
#ifndef _DEF_BF532_H
#define _DEF_BF532_H
-/* include all Core registers and bit definitions */
-#include <asm/def_LPBlackfin.h>
-
/*********************************************************************************** */
/* System MMR Register Map */
/*********************************************************************************** */
@@ -182,12 +179,8 @@
#define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */
/* DMA Traffic controls */
-#define DMA_TC_PER 0xFFC00B0C /* Traffic Control Periods Register */
-#define DMA_TC_CNT 0xFFC00B10 /* Traffic Control Current Counts Register */
-
-/* Alternate deprecated register names (below) provided for backwards code compatibility */
-#define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */
-#define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */
+#define DMAC_TC_PER 0xFFC00B0C /* Traffic Control Periods Register */
+#define DMAC_TC_CNT 0xFFC00B10 /* Traffic Control Current Counts Register */
/* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */
#define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */
@@ -432,175 +425,6 @@
#define IWR_ENABLE(x) (1 << (x)) /* Wakeup Enable Peripheral #x */
#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x))) /* Wakeup Disable Peripheral #x */
-/* ***************************** UART CONTROLLER MASKS ********************** */
-
-/* UART_LCR Register */
-
-#define DLAB 0x80
-#define SB 0x40
-#define STP 0x20
-#define EPS 0x10
-#define PEN 0x08
-#define STB 0x04
-#define WLS(x) ((x-5) & 0x03)
-
-#define DLAB_P 0x07
-#define SB_P 0x06
-#define STP_P 0x05
-#define EPS_P 0x04
-#define PEN_P 0x03
-#define STB_P 0x02
-#define WLS_P1 0x01
-#define WLS_P0 0x00
-
-/* UART_MCR Register */
-#define LOOP_ENA 0x10
-#define LOOP_ENA_P 0x04
-
-/* UART_LSR Register */
-#define TEMT 0x40
-#define THRE 0x20
-#define BI 0x10
-#define FE 0x08
-#define PE 0x04
-#define OE 0x02
-#define DR 0x01
-
-#define TEMP_P 0x06
-#define THRE_P 0x05
-#define BI_P 0x04
-#define FE_P 0x03
-#define PE_P 0x02
-#define OE_P 0x01
-#define DR_P 0x00
-
-/* UART_IER Register */
-#define ELSI 0x04
-#define ETBEI 0x02
-#define ERBFI 0x01
-
-#define ELSI_P 0x02
-#define ETBEI_P 0x01
-#define ERBFI_P 0x00
-
-/* UART_IIR Register */
-#define STATUS(x) ((x << 1) & 0x06)
-#define NINT 0x01
-#define STATUS_P1 0x02
-#define STATUS_P0 0x01
-#define NINT_P 0x00
-#define IIR_TX_READY 0x02 /* UART_THR empty */
-#define IIR_RX_READY 0x04 /* Receive data ready */
-#define IIR_LINE_CHANGE 0x06 /* Receive line status */
-#define IIR_STATUS 0x06
-
-/* UART_GCTL Register */
-#define FFE 0x20
-#define FPE 0x10
-#define RPOLC 0x08
-#define TPOLC 0x04
-#define IREN 0x02
-#define UCEN 0x01
-
-#define FFE_P 0x05
-#define FPE_P 0x04
-#define RPOLC_P 0x03
-#define TPOLC_P 0x02
-#define IREN_P 0x01
-#define UCEN_P 0x00
-
-/* ********** SERIAL PORT MASKS ********************** */
-
-/* SPORTx_TCR1 Masks */
-#define TSPEN 0x0001 /* TX enable */
-#define ITCLK 0x0002 /* Internal TX Clock Select */
-#define TDTYPE 0x000C /* TX Data Formatting Select */
-#define DTYPE_NORM 0x0000 /* Data Format Normal */
-#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */
-#define DTYPE_ALAW 0x000C /* Compand Using A-Law */
-#define TLSBIT 0x0010 /* TX Bit Order */
-#define ITFS 0x0200 /* Internal TX Frame Sync Select */
-#define TFSR 0x0400 /* TX Frame Sync Required Select */
-#define DITFS 0x0800 /* Data Independent TX Frame Sync Select */
-#define LTFS 0x1000 /* Low TX Frame Sync Select */
-#define LATFS 0x2000 /* Late TX Frame Sync Select */
-#define TCKFE 0x4000 /* TX Clock Falling Edge Select */
-
-/* SPORTx_TCR2 Masks */
-#if defined(__ADSPBF531__) || defined(__ADSPBF532__) || \
- defined(__ADSPBF533__)
-# define SLEN 0x001F /*TX Word Length */
-#else
-# define SLEN(x) ((x)&0x1F) /* SPORT TX Word Length (2 - 31) */
-#endif
-#define TXSE 0x0100 /*TX Secondary Enable */
-#define TSFSE 0x0200 /*TX Stereo Frame Sync Enable */
-#define TRFST 0x0400 /*TX Right-First Data Order */
-
-/* SPORTx_RCR1 Masks */
-#define RSPEN 0x0001 /* RX enable */
-#define IRCLK 0x0002 /* Internal RX Clock Select */
-#define RDTYPE 0x000C /* RX Data Formatting Select */
-#define DTYPE_NORM 0x0000 /* no companding */
-#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */
-#define DTYPE_ALAW 0x000C /* Compand Using A-Law */
-#define RLSBIT 0x0010 /* RX Bit Order */
-#define IRFS 0x0200 /* Internal RX Frame Sync Select */
-#define RFSR 0x0400 /* RX Frame Sync Required Select */
-#define LRFS 0x1000 /* Low RX Frame Sync Select */
-#define LARFS 0x2000 /* Late RX Frame Sync Select */
-#define RCKFE 0x4000 /* RX Clock Falling Edge Select */
-
-/* SPORTx_RCR2 Masks */
-/* SLEN defined above */
-#define RXSE 0x0100 /*RX Secondary Enable */
-#define RSFSE 0x0200 /*RX Stereo Frame Sync Enable */
-#define RRFST 0x0400 /*Right-First Data Order */
-
-/*SPORTx_STAT Masks */
-#define RXNE 0x0001 /*RX FIFO Not Empty Status */
-#define RUVF 0x0002 /*RX Underflow Status */
-#define ROVF 0x0004 /*RX Overflow Status */
-#define TXF 0x0008 /*TX FIFO Full Status */
-#define TUVF 0x0010 /*TX Underflow Status */
-#define TOVF 0x0020 /*TX Overflow Status */
-#define TXHRE 0x0040 /*TX Hold Register Empty */
-
-/*SPORTx_MCMC1 Masks */
-#define SP_WSIZE 0x0000F000 /*Multichannel Window Size Field */
-#define SP_WOFF 0x000003FF /*Multichannel Window Offset Field */
-/* SPORTx_MCMC1 Macros */
-#define SET_SP_WOFF(x) ((x) & 0x3FF) /* Multichannel Window Offset Field */
-/* Only use SET_WSIZE Macro With Logic OR While Setting Lower Order Bits */
-#define SET_SP_WSIZE(x) (((((x)>>0x3)-1)&0xF) << 0xC) /* Multichannel Window Size = (x/8)-1 */
-
-/*SPORTx_MCMC2 Masks */
-#define MCCRM 0x00000003 /*Multichannel Clock Recovery Mode */
-#define REC_BYPASS 0x0000 /* Bypass Mode (No Clock Recovery) */
-#define REC_2FROM4 0x0002 /* Recover 2 MHz Clock from 4 MHz Clock */
-#define REC_8FROM16 0x0003 /* Recover 8 MHz Clock from 16 MHz Clock */
-#define MCDTXPE 0x00000004 /*Multichannel DMA Transmit Packing */
-#define MCDRXPE 0x00000008 /*Multichannel DMA Receive Packing */
-#define MCMEN 0x00000010 /*Multichannel Frame Mode Enable */
-#define FSDR 0x00000080 /*Multichannel Frame Sync to Data Relationship */
-#define MFD 0x0000F000 /*Multichannel Frame Delay */
-#define MFD_0 0x0000 /* Multichannel Frame Delay = 0 */
-#define MFD_1 0x1000 /* Multichannel Frame Delay = 1 */
-#define MFD_2 0x2000 /* Multichannel Frame Delay = 2 */
-#define MFD_3 0x3000 /* Multichannel Frame Delay = 3 */
-#define MFD_4 0x4000 /* Multichannel Frame Delay = 4 */
-#define MFD_5 0x5000 /* Multichannel Frame Delay = 5 */
-#define MFD_6 0x6000 /* Multichannel Frame Delay = 6 */
-#define MFD_7 0x7000 /* Multichannel Frame Delay = 7 */
-#define MFD_8 0x8000 /* Multichannel Frame Delay = 8 */
-#define MFD_9 0x9000 /* Multichannel Frame Delay = 9 */
-#define MFD_10 0xA000 /* Multichannel Frame Delay = 10 */
-#define MFD_11 0xB000 /* Multichannel Frame Delay = 11 */
-#define MFD_12 0xC000 /* Multichannel Frame Delay = 12 */
-#define MFD_13 0xD000 /* Multichannel Frame Delay = 13 */
-#define MFD_14 0xE000 /* Multichannel Frame Delay = 14 */
-#define MFD_15 0xF000 /* Multichannel Frame Delay = 15 */
-
/* ********* PARALLEL PERIPHERAL INTERFACE (PPI) MASKS **************** */
/* PPI_CONTROL Masks */
@@ -735,114 +559,6 @@
#define ERR_TYP_P0 0x0E
#define ERR_TYP_P1 0x0F
-/*/ ****************** PROGRAMMABLE FLAG MASKS ********************* */
-
-/* General Purpose IO (0xFFC00700 - 0xFFC007FF) Masks */
-#define PF0 0x0001
-#define PF1 0x0002
-#define PF2 0x0004
-#define PF3 0x0008
-#define PF4 0x0010
-#define PF5 0x0020
-#define PF6 0x0040
-#define PF7 0x0080
-#define PF8 0x0100
-#define PF9 0x0200
-#define PF10 0x0400
-#define PF11 0x0800
-#define PF12 0x1000
-#define PF13 0x2000
-#define PF14 0x4000
-#define PF15 0x8000
-
-/* General Purpose IO (0xFFC00700 - 0xFFC007FF) BIT POSITIONS */
-#define PF0_P 0
-#define PF1_P 1
-#define PF2_P 2
-#define PF3_P 3
-#define PF4_P 4
-#define PF5_P 5
-#define PF6_P 6
-#define PF7_P 7
-#define PF8_P 8
-#define PF9_P 9
-#define PF10_P 10
-#define PF11_P 11
-#define PF12_P 12
-#define PF13_P 13
-#define PF14_P 14
-#define PF15_P 15
-
-/* *********** SERIAL PERIPHERAL INTERFACE (SPI) MASKS **************** */
-
-/* SPI_CTL Masks */
-#define TIMOD 0x00000003 /* Transfer initiation mode and interrupt generation */
-#define RDBR_CORE 0x0000 /* RDBR Read Initiates, IRQ When RDBR Full */
-#define TDBR_CORE 0x0001 /* TDBR Write Initiates, IRQ When TDBR Empty */
-#define RDBR_DMA 0x0002 /* DMA Read, DMA Until FIFO Empty */
-#define TDBR_DMA 0x0003 /* DMA Write, DMA Until FIFO Full */
-#define SZ 0x00000004 /* Send Zero (=0) or last (=1) word when TDBR empty. */
-#define GM 0x00000008 /* When RDBR full, get more (=1) data or discard (=0) incoming Data */
-#define PSSE 0x00000010 /* Enable (=1) Slave-Select input for Master. */
-#define EMISO 0x00000020 /* Enable (=1) MISO pin as an output. */
-#define SIZE 0x00000100 /* Word length (0 => 8 bits, 1 => 16 bits) */
-#define LSBF 0x00000200 /* Data format (0 => MSB sent/received first 1 => LSB sent/received first) */
-#define CPHA 0x00000400 /* Clock phase (0 => SPICLK starts toggling in middle of xfer, 1 => SPICLK toggles at the beginning of xfer. */
-#define CPOL 0x00000800 /* Clock polarity (0 => active-high, 1 => active-low) */
-#define MSTR 0x00001000 /* Configures SPI as master (=1) or slave (=0) */
-#define WOM 0x00002000 /* Open drain (=1) data output enable (for MOSI and MISO) */
-#define SPE 0x00004000 /* SPI module enable (=1), disable (=0) */
-
-/* SPI_FLG Masks */
-#define FLS1 0x00000002 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */
-#define FLS2 0x00000004 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */
-#define FLS3 0x00000008 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */
-#define FLS4 0x00000010 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */
-#define FLS5 0x00000020 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */
-#define FLS6 0x00000040 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */
-#define FLS7 0x00000080 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */
-#define FLG1 0x00000200 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */
-#define FLG2 0x00000400 /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */
-#define FLG3 0x00000800 /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */
-#define FLG4 0x00001000 /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */
-#define FLG5 0x00002000 /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */
-#define FLG6 0x00004000 /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */
-#define FLG7 0x00008000 /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */
-
-/* SPI_FLG Bit Positions */
-#define FLS1_P 0x00000001 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */
-#define FLS2_P 0x00000002 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */
-#define FLS3_P 0x00000003 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */
-#define FLS4_P 0x00000004 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */
-#define FLS5_P 0x00000005 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */
-#define FLS6_P 0x00000006 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */
-#define FLS7_P 0x00000007 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */
-#define FLG1_P 0x00000009 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */
-#define FLG2_P 0x0000000A /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */
-#define FLG3_P 0x0000000B /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */
-#define FLG4_P 0x0000000C /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */
-#define FLG5_P 0x0000000D /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */
-#define FLG6_P 0x0000000E /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */
-#define FLG7_P 0x0000000F /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */
-
-/* SPI_STAT Masks */
-#define SPIF 0x00000001 /* Set (=1) when SPI single-word transfer complete */
-#define MODF 0x00000002 /* Set (=1) in a master device when some other device tries to become master */
-#define TXE 0x00000004 /* Set (=1) when transmission occurs with no new data in SPI_TDBR */
-#define TXS 0x00000008 /* SPI_TDBR Data Buffer Status (0=Empty, 1=Full) */
-#define RBSY 0x00000010 /* Set (=1) when data is received with RDBR full */
-#define RXS 0x00000020 /* SPI_RDBR Data Buffer Status (0=Empty, 1=Full) */
-#define TXCOL 0x00000040 /* When set (=1), corrupt data may have been transmitted */
-
-/* SPIx_FLG Masks */
-#define FLG1E 0xFDFF /* Activates SPI_FLOUT1 */
-#define FLG2E 0xFBFF /* Activates SPI_FLOUT2 */
-#define FLG3E 0xF7FF /* Activates SPI_FLOUT3 */
-#define FLG4E 0xEFFF /* Activates SPI_FLOUT4 */
-#define FLG5E 0xDFFF /* Activates SPI_FLOUT5 */
-#define FLG6E 0xBFFF /* Activates SPI_FLOUT6 */
-#define FLG7E 0x7FFF /* Activates SPI_FLOUT7 */
-
/* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS ************* */
/* AMGCTL Masks */
diff --git a/arch/blackfin/mach-bf533/include/mach/gpio.h b/arch/blackfin/mach-bf533/include/mach/gpio.h
index 2af19d69a7a..cce4f8fb378 100644
--- a/arch/blackfin/mach-bf533/include/mach/gpio.h
+++ b/arch/blackfin/mach-bf533/include/mach/gpio.h
@@ -9,23 +9,25 @@
#define MAX_BLACKFIN_GPIOS 16
-#define GPIO_PF0 0
-#define GPIO_PF1 1
-#define GPIO_PF2 2
-#define GPIO_PF3 3
-#define GPIO_PF4 4
-#define GPIO_PF5 5
-#define GPIO_PF6 6
-#define GPIO_PF7 7
-#define GPIO_PF8 8
-#define GPIO_PF9 9
-#define GPIO_PF10 10
-#define GPIO_PF11 11
-#define GPIO_PF12 12
-#define GPIO_PF13 13
-#define GPIO_PF14 14
-#define GPIO_PF15 15
+#define GPIO_PF0 0
+#define GPIO_PF1 1
+#define GPIO_PF2 2
+#define GPIO_PF3 3
+#define GPIO_PF4 4
+#define GPIO_PF5 5
+#define GPIO_PF6 6
+#define GPIO_PF7 7
+#define GPIO_PF8 8
+#define GPIO_PF9 9
+#define GPIO_PF10 10
+#define GPIO_PF11 11
+#define GPIO_PF12 12
+#define GPIO_PF13 13
+#define GPIO_PF14 14
+#define GPIO_PF15 15
#define PORT_F GPIO_PF0
+#include <mach-common/ports-f.h>
+
#endif /* _MACH_GPIO_H_ */
diff --git a/arch/blackfin/mach-bf533/include/mach/irq.h b/arch/blackfin/mach-bf533/include/mach/irq.h
index 1f7e9765d95..70973375414 100644
--- a/arch/blackfin/mach-bf533/include/mach/irq.h
+++ b/arch/blackfin/mach-bf533/include/mach/irq.h
@@ -7,83 +7,36 @@
#ifndef _BF533_IRQ_H_
#define _BF533_IRQ_H_
-/*
- * Interrupt source definitions
- Event Source Core Event Name
-Core Emulation **
- Events (highest priority) EMU 0
- Reset RST 1
- NMI NMI 2
- Exception EVX 3
- Reserved -- 4
- Hardware Error IVHW 5
- Core Timer IVTMR 6 *
- PLL Wakeup Interrupt IVG7 7
- DMA Error (generic) IVG7 8
- PPI Error Interrupt IVG7 9
- SPORT0 Error Interrupt IVG7 10
- SPORT1 Error Interrupt IVG7 11
- SPI Error Interrupt IVG7 12
- UART Error Interrupt IVG7 13
- RTC Interrupt IVG8 14
- DMA0 Interrupt (PPI) IVG8 15
- DMA1 (SPORT0 RX) IVG9 16
- DMA2 (SPORT0 TX) IVG9 17
- DMA3 (SPORT1 RX) IVG9 18
- DMA4 (SPORT1 TX) IVG9 19
- DMA5 (PPI) IVG10 20
- DMA6 (UART RX) IVG10 21
- DMA7 (UART TX) IVG10 22
- Timer0 IVG11 23
- Timer1 IVG11 24
- Timer2 IVG11 25
- PF Interrupt A IVG12 26
- PF Interrupt B IVG12 27
- DMA8/9 Interrupt IVG13 28
- DMA10/11 Interrupt IVG13 29
- Watchdog Timer IVG13 30
+#include <mach-common/irq.h>
- Softirq IVG14 31
- System Call --
- (lowest priority) IVG15 32 *
- */
-#define SYS_IRQS 31
-#define NR_PERI_INTS 24
+#define NR_PERI_INTS 24
-/* The ABSTRACT IRQ definitions */
-/** the first seven of the following are fixed, the rest you change if you need to **/
-#define IRQ_EMU 0 /*Emulation */
-#define IRQ_RST 1 /*reset */
-#define IRQ_NMI 2 /*Non Maskable */
-#define IRQ_EVX 3 /*Exception */
-#define IRQ_UNUSED 4 /*- unused interrupt*/
-#define IRQ_HWERR 5 /*Hardware Error */
-#define IRQ_CORETMR 6 /*Core timer */
+#define IRQ_PLL_WAKEUP BFIN_IRQ(0) /* PLL Wakeup Interrupt */
+#define IRQ_DMA_ERROR BFIN_IRQ(1) /* DMA Error (general) */
+#define IRQ_PPI_ERROR BFIN_IRQ(2) /* PPI Error Interrupt */
+#define IRQ_SPORT0_ERROR BFIN_IRQ(3) /* SPORT0 Error Interrupt */
+#define IRQ_SPORT1_ERROR BFIN_IRQ(4) /* SPORT1 Error Interrupt */
+#define IRQ_SPI_ERROR BFIN_IRQ(5) /* SPI Error Interrupt */
+#define IRQ_UART0_ERROR BFIN_IRQ(6) /* UART Error Interrupt */
+#define IRQ_RTC BFIN_IRQ(7) /* RTC Interrupt */
+#define IRQ_PPI BFIN_IRQ(8) /* DMA0 Interrupt (PPI) */
+#define IRQ_SPORT0_RX BFIN_IRQ(9) /* DMA1 Interrupt (SPORT0 RX) */
+#define IRQ_SPORT0_TX BFIN_IRQ(10) /* DMA2 Interrupt (SPORT0 TX) */
+#define IRQ_SPORT1_RX BFIN_IRQ(11) /* DMA3 Interrupt (SPORT1 RX) */
+#define IRQ_SPORT1_TX BFIN_IRQ(12) /* DMA4 Interrupt (SPORT1 TX) */
+#define IRQ_SPI BFIN_IRQ(13) /* DMA5 Interrupt (SPI) */
+#define IRQ_UART0_RX BFIN_IRQ(14) /* DMA6 Interrupt (UART RX) */
+#define IRQ_UART0_TX BFIN_IRQ(15) /* DMA7 Interrupt (UART TX) */
+#define IRQ_TIMER0 BFIN_IRQ(16) /* Timer 0 */
+#define IRQ_TIMER1 BFIN_IRQ(17) /* Timer 1 */
+#define IRQ_TIMER2 BFIN_IRQ(18) /* Timer 2 */
+#define IRQ_PROG_INTA BFIN_IRQ(19) /* Programmable Flags A (8) */
+#define IRQ_PROG_INTB BFIN_IRQ(20) /* Programmable Flags B (8) */
+#define IRQ_MEM_DMA0 BFIN_IRQ(21) /* DMA8/9 Interrupt (Memory DMA Stream 0) */
+#define IRQ_MEM_DMA1 BFIN_IRQ(22) /* DMA10/11 Interrupt (Memory DMA Stream 1) */
+#define IRQ_WATCH BFIN_IRQ(23) /* Watch Dog Timer */
-#define IRQ_PLL_WAKEUP 7 /*PLL Wakeup Interrupt */
-#define IRQ_DMA_ERROR 8 /*DMA Error (general) */
-#define IRQ_PPI_ERROR 9 /*PPI Error Interrupt */
-#define IRQ_SPORT0_ERROR 10 /*SPORT0 Error Interrupt */
-#define IRQ_SPORT1_ERROR 11 /*SPORT1 Error Interrupt */
-#define IRQ_SPI_ERROR 12 /*SPI Error Interrupt */
-#define IRQ_UART0_ERROR 13 /*UART Error Interrupt */
-#define IRQ_RTC 14 /*RTC Interrupt */
-#define IRQ_PPI 15 /*DMA0 Interrupt (PPI) */
-#define IRQ_SPORT0_RX 16 /*DMA1 Interrupt (SPORT0 RX) */
-#define IRQ_SPORT0_TX 17 /*DMA2 Interrupt (SPORT0 TX) */
-#define IRQ_SPORT1_RX 18 /*DMA3 Interrupt (SPORT1 RX) */
-#define IRQ_SPORT1_TX 19 /*DMA4 Interrupt (SPORT1 TX) */
-#define IRQ_SPI 20 /*DMA5 Interrupt (SPI) */
-#define IRQ_UART0_RX 21 /*DMA6 Interrupt (UART RX) */
-#define IRQ_UART0_TX 22 /*DMA7 Interrupt (UART TX) */
-#define IRQ_TIMER0 23 /*Timer 0 */
-#define IRQ_TIMER1 24 /*Timer 1 */
-#define IRQ_TIMER2 25 /*Timer 2 */
-#define IRQ_PROG_INTA 26 /*Programmable Flags A (8) */
-#define IRQ_PROG_INTB 27 /*Programmable Flags B (8) */
-#define IRQ_MEM_DMA0 28 /*DMA8/9 Interrupt (Memory DMA Stream 0) */
-#define IRQ_MEM_DMA1 29 /*DMA10/11 Interrupt (Memory DMA Stream 1) */
-#define IRQ_WATCH 30 /*Watch Dog Timer */
+#define SYS_IRQS 31
#define IRQ_PF0 33
#define IRQ_PF1 34
@@ -105,46 +58,35 @@ Core Emulation **
#define GPIO_IRQ_BASE IRQ_PF0
#define NR_MACH_IRQS (IRQ_PF15 + 1)
-#define NR_IRQS (NR_MACH_IRQS + NR_SPARE_IRQS)
-
-#define IVG7 7
-#define IVG8 8
-#define IVG9 9
-#define IVG10 10
-#define IVG11 11
-#define IVG12 12
-#define IVG13 13
-#define IVG14 14
-#define IVG15 15
-/* IAR0 BIT FIELDS*/
-#define RTC_ERROR_POS 28
-#define UART_ERROR_POS 24
-#define SPORT1_ERROR_POS 20
-#define SPI_ERROR_POS 16
-#define SPORT0_ERROR_POS 12
-#define PPI_ERROR_POS 8
-#define DMA_ERROR_POS 4
-#define PLLWAKE_ERROR_POS 0
+/* IAR0 BIT FIELDS */
+#define RTC_ERROR_POS 28
+#define UART_ERROR_POS 24
+#define SPORT1_ERROR_POS 20
+#define SPI_ERROR_POS 16
+#define SPORT0_ERROR_POS 12
+#define PPI_ERROR_POS 8
+#define DMA_ERROR_POS 4
+#define PLLWAKE_ERROR_POS 0
-/* IAR1 BIT FIELDS*/
-#define DMA7_UARTTX_POS 28
-#define DMA6_UARTRX_POS 24
-#define DMA5_SPI_POS 20
-#define DMA4_SPORT1TX_POS 16
-#define DMA3_SPORT1RX_POS 12
-#define DMA2_SPORT0TX_POS 8
-#define DMA1_SPORT0RX_POS 4
-#define DMA0_PPI_POS 0
+/* IAR1 BIT FIELDS */
+#define DMA7_UARTTX_POS 28
+#define DMA6_UARTRX_POS 24
+#define DMA5_SPI_POS 20
+#define DMA4_SPORT1TX_POS 16
+#define DMA3_SPORT1RX_POS 12
+#define DMA2_SPORT0TX_POS 8
+#define DMA1_SPORT0RX_POS 4
+#define DMA0_PPI_POS 0
-/* IAR2 BIT FIELDS*/
-#define WDTIMER_POS 28
-#define MEMDMA1_POS 24
-#define MEMDMA0_POS 20
-#define PFB_POS 16
-#define PFA_POS 12
-#define TIMER2_POS 8
-#define TIMER1_POS 4
-#define TIMER0_POS 0
+/* IAR2 BIT FIELDS */
+#define WDTIMER_POS 28
+#define MEMDMA1_POS 24
+#define MEMDMA0_POS 20
+#define PFB_POS 16
+#define PFA_POS 12
+#define TIMER2_POS 8
+#define TIMER1_POS 4
+#define TIMER0_POS 0
-#endif /* _BF533_IRQ_H_ */
+#endif
diff --git a/arch/blackfin/mach-bf533/include/mach/pll.h b/arch/blackfin/mach-bf533/include/mach/pll.h
new file mode 100644
index 00000000000..94cca674d83
--- /dev/null
+++ b/arch/blackfin/mach-bf533/include/mach/pll.h
@@ -0,0 +1 @@
+#include <mach-common/pll.h>
diff --git a/arch/blackfin/mach-bf533/include/mach/portmux.h b/arch/blackfin/mach-bf533/include/mach/portmux.h
index 075dae1af16..96f5d9129f2 100644
--- a/arch/blackfin/mach-bf533/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf533/include/mach/portmux.h
@@ -7,7 +7,7 @@
#ifndef _MACH_PORTMUX_H_
#define _MACH_PORTMUX_H_
-#define MAX_RESOURCES MAX_BLACKFIN_GPIOS
+#define MAX_RESOURCES MAX_BLACKFIN_GPIOS
#define P_PPI0_CLK (P_DONTCARE)
#define P_PPI0_FS1 (P_DONTCARE)
@@ -60,6 +60,7 @@
#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PF2))
#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PF1))
#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PF0))
+#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PF2
#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
#define P_TMR2 (P_DONTCARE)
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-21 05:04:55 +0000