diff options
Diffstat (limited to 'arch/blackfin/mach-bf527/boards/ezkit.c')
| -rw-r--r-- | arch/blackfin/mach-bf527/boards/ezkit.c | 321 |
1 files changed, 184 insertions, 137 deletions
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index 9222bc00bbd..d64f565dc2a 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -7,6 +7,7 @@ */ #include <linux/device.h> +#include <linux/export.h> #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -26,6 +27,7 @@ #include <asm/portmux.h> #include <asm/dpmc.h> #include <linux/spi/ad7877.h> +#include <asm/bfin_sport.h> /* * Name the Board for the /proc/cpuinfo @@ -40,7 +42,7 @@ const char bfin_board_name[] = "ADI BF527-EZKIT"; * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) #include <linux/usb/isp1760.h> static struct resource bfin_isp1760_resources[] = { [0] = { @@ -75,7 +77,7 @@ static struct platform_device bfin_isp1760_device = { }; #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) static struct resource musb_resources[] = { [0] = { .start = 0xffc03800, @@ -86,11 +88,13 @@ static struct resource musb_resources[] = { .start = IRQ_USB_INT0, .end = IRQ_USB_INT0, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + .name = "mc" }, [2] = { /* DMA IRQ */ .start = IRQ_USB_DMA, .end = IRQ_USB_DMA, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + .name = "dma" }, }; @@ -106,12 +110,13 @@ static struct musb_hdrc_config musb_config = { * if it is the case. */ .gpio_vrsel_active = 1, + .clkin = 24, /* musb CLKIN in MHZ */ }; static struct musb_hdrc_platform_data musb_plat = { -#if defined(CONFIG_USB_MUSB_OTG) +#if defined(CONFIG_USB_MUSB_HDRC) && defined(CONFIG_USB_GADGET_MUSB_HDRC) .mode = MUSB_OTG, -#elif defined(CONFIG_USB_MUSB_HDRC_HCD) +#elif defined(CONFIG_USB_MUSB_HDRC) .mode = MUSB_HOST, #elif defined(CONFIG_USB_GADGET_MUSB_HDRC) .mode = MUSB_PERIPHERAL, @@ -122,7 +127,7 @@ static struct musb_hdrc_platform_data musb_plat = { static u64 musb_dmamask = ~(u32)0; static struct platform_device musb_device = { - .name = "musb_hdrc", + .name = "musb-blackfin", .id = 0, .dev = { .dma_mask = &musb_dmamask, @@ -134,7 +139,7 @@ static struct platform_device musb_device = { }; #endif -#if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_T350MCQB) static struct resource bf52x_t350mcqb_resources[] = { { @@ -152,7 +157,7 @@ static struct platform_device bf52x_t350mcqb_device = { }; #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) #include <asm/bfin-lq035q1.h> static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = { @@ -179,7 +184,7 @@ static struct platform_device bfin_lq035q1_device = { }; #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition ezkit_partitions[] = { { .name = "bootloader(nor)", @@ -219,7 +224,7 @@ static struct platform_device ezkit_flash_device = { }; #endif -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) static struct mtd_partition partition_info[] = { { .name = "bootloader(nand)", @@ -269,7 +274,7 @@ static struct platform_device bf5xx_nand_device = { }; #endif -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) static struct resource bfin_pcmcia_cf_resources[] = { { .start = 0x20310000, /* IO PORT */ @@ -298,14 +303,14 @@ static struct platform_device bfin_pcmcia_cf_device = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -338,7 +343,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +#if IS_ENABLED(CONFIG_DM9000) static struct resource dm9000_resources[] = { [0] = { .start = 0x203FB800, @@ -365,7 +370,7 @@ static struct platform_device dm9000_device = { }; #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_RMII0; @@ -398,13 +403,16 @@ static struct platform_device bfin_mac_device = { }; #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x20300000, .end = 0x20300000 + 0x100, .flags = IORESOURCE_MEM, }, { + .start = 1, + .flags = IORESOURCE_BUS, + }, { .start = IRQ_PF7, .end = IRQ_PF7, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, @@ -419,8 +427,7 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -444,40 +451,16 @@ static struct flash_platform_data bfin_spi_flash_data = { /* SPI flash chip (m25p64) */ static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ - .bits_per_word = 8, -}; -#endif - -#if defined(CONFIG_BFIN_SPI_ADC) \ - || defined(CONFIG_BFIN_SPI_ADC_MODULE) -/* SPI ADC chip */ -static struct bfin5xx_spi_chip spi_adc_chip_info = { - .enable_dma = 1, /* use dma transfer with this chip*/ - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ - || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) -static struct bfin5xx_spi_chip ad1836_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, - .bits_per_word = 8, }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) -static struct bfin5xx_spi_chip spi_ad7877_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; - +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -493,7 +476,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879) #include <linux/spi/ad7879.h> static const struct ad7879_platform_data bfin_ad7879_ts_info = { .model = 7879, /* Model = AD7879 */ @@ -509,46 +492,96 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = { }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) -static struct bfin5xx_spi_chip spi_ad7879_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) + +static const u16 bfin_snd_pin[][7] = { + {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0, 0}, + {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, + P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_TFS, 0}, +}; + +static struct bfin_snd_platform_data bfin_snd_data[] = { + { + .pin_req = &bfin_snd_pin[0][0], + }, + { + .pin_req = &bfin_snd_pin[1][0], + }, +}; + +#define BFIN_SND_RES(x) \ + [x] = { \ + { \ + .start = SPORT##x##_TCR1, \ + .end = SPORT##x##_TCR1, \ + .flags = IORESOURCE_MEM \ + }, \ + { \ + .start = CH_SPORT##x##_RX, \ + .end = CH_SPORT##x##_RX, \ + .flags = IORESOURCE_DMA, \ + }, \ + { \ + .start = CH_SPORT##x##_TX, \ + .end = CH_SPORT##x##_TX, \ + .flags = IORESOURCE_DMA, \ + }, \ + { \ + .start = IRQ_SPORT##x##_ERROR, \ + .end = IRQ_SPORT##x##_ERROR, \ + .flags = IORESOURCE_IRQ, \ + } \ + } + +static struct resource bfin_snd_resources[][4] = { + BFIN_SND_RES(0), + BFIN_SND_RES(1), }; #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) -static struct bfin5xx_spi_chip spidev_chip_info = { - .enable_dma = 0, - .bits_per_word = 8, +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) +static struct platform_device bfin_i2s_pcm = { + .name = "bfin-i2s-pcm-audio", + .id = -1, }; #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) -static struct platform_device bfin_i2s = { - .name = "bfin-i2s", - .id = CONFIG_SND_BF5XX_SPORT_NUM, - /* TODO: add platform data here */ +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) +static struct platform_device bfin_ac97_pcm = { + .name = "bfin-ac97-pcm-audio", + .id = -1, }; #endif -#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) -static struct platform_device bfin_tdm = { - .name = "bfin-tdm", +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) +static struct platform_device bfin_i2s = { + .name = "bfin-i2s", .id = CONFIG_SND_BF5XX_SPORT_NUM, - /* TODO: add platform data here */ + .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]), + .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM], + .dev = { + .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM], + }, }; #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) -static struct bfin5xx_spi_chip lq035q1_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 8, +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) +static const char * const ad1836_link[] = { + "bfin-i2s.0", + "spi0.4", +}; +static struct platform_device bfin_ad1836_machine = { + .name = "bfin-snd-ad1836", + .id = -1, + .dev = { + .platform_data = (void *)ad1836_link, + }, }; #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -561,29 +594,17 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_BFIN_SPI_ADC) \ - || defined(CONFIG_BFIN_SPI_ADC_MODULE) - { - .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ - .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, /* Framework bus number */ - .chip_select = 1, /* Framework chip select. */ - .platform_data = NULL, /* No spi_driver specific config */ - .controller_data = &spi_adc_chip_info, - }, -#endif - -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ - || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 4, - .controller_data = &ad1836_spi_chip_info, + .platform_data = "ad1836", + .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -594,7 +615,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, @@ -602,10 +623,9 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 2, - .controller_data = &spi_ad7877_chip_info, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI) { .modalias = "ad7879", .platform_data = &bfin_ad7879_ts_info, @@ -613,32 +633,29 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 3, - .controller_data = &spi_ad7879_chip_info, .mode = SPI_CPHA | SPI_CPOL, }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 1, - .controller_data = &spidev_chip_info, }, #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) { .modalias = "bfin-lq035q1-spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 7, - .controller_data = &lq035q1_spi_chip_info, .mode = SPI_CPHA | SPI_CPOL, }, #endif }; -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI controller data */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, @@ -676,7 +693,7 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -685,8 +702,13 @@ static struct resource bfin_uart0_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART0_TX, + .end = IRQ_UART0_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX+1, + .end = IRQ_UART0_RX, .flags = IORESOURCE_IRQ, }, { @@ -706,7 +728,7 @@ static struct resource bfin_uart0_resources[] = { }, }; -unsigned short bfin_uart0_peripherals[] = { +static unsigned short bfin_uart0_peripherals[] = { P_UART0_TX, P_UART0_RX, 0 }; @@ -728,8 +750,13 @@ static struct resource bfin_uart1_resources[] = { .flags = IORESOURCE_MEM, }, { + .start = IRQ_UART1_TX, + .end = IRQ_UART1_TX, + .flags = IORESOURCE_IRQ, + }, + { .start = IRQ_UART1_RX, - .end = IRQ_UART1_RX+1, + .end = IRQ_UART1_RX, .flags = IORESOURCE_IRQ, }, { @@ -761,7 +788,7 @@ static struct resource bfin_uart1_resources[] = { #endif }; -unsigned short bfin_uart1_peripherals[] = { +static unsigned short bfin_uart1_peripherals[] = { P_UART1_TX, P_UART1_RX, 0 }; @@ -777,7 +804,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -832,7 +859,9 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) +static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; + static struct resource bfin_twi0_resource[] = { [0] = { .start = TWI0_REGBASE, @@ -851,10 +880,13 @@ static struct platform_device i2c_bfin_twi_device = { .id = 0, .num_resources = ARRAY_SIZE(bfin_twi0_resource), .resource = bfin_twi0_resource, + .dev = { + .platform_data = &bfin_twi0_pins, + }, }; #endif -#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE) +#if IS_ENABLED(CONFIG_PMIC_ADP5520) #include <linux/mfd/adp5520.h> /* @@ -920,49 +952,54 @@ static struct adp5520_platform_data adp5520_pdev_data = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, #endif -#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE) +#if IS_ENABLED(CONFIG_INPUT_PCF8574) { I2C_BOARD_INFO("pcf8574_keypad", 0x27), .irq = IRQ_PF8, }, #endif -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_7393) { I2C_BOARD_INFO("bfin-adv7393", 0x2B), }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_I2C) { I2C_BOARD_INFO("ad7879", 0x2C), .irq = IRQ_PF8, .platform_data = (void *)&bfin_ad7879_ts_info, }, #endif -#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE) +#if IS_ENABLED(CONFIG_PMIC_ADP5520) { I2C_BOARD_INFO("pmic-adp5520", 0x32), .irq = IRQ_PF9, .platform_data = (void *)&adp5520_pdev_data, }, #endif -#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_SSM2602) { I2C_BOARD_INFO("ssm2602", 0x1b), }, #endif -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("ad5252", 0x2f), }, #endif +#if IS_ENABLED(CONFIG_SND_SOC_ADAU1373) + { + I2C_BOARD_INFO("adau1373", 0x1A), + }, +#endif }; -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -982,9 +1019,9 @@ static struct resource bfin_sport0_uart_resources[] = { }, }; -unsigned short bfin_sport0_peripherals[] = { +static unsigned short bfin_sport0_peripherals[] = { P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, - P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 + P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0 }; static struct platform_device bfin_sport0_uart_device = { @@ -1016,9 +1053,9 @@ static struct resource bfin_sport1_uart_resources[] = { }, }; -unsigned short bfin_sport1_peripherals[] = { +static unsigned short bfin_sport1_peripherals[] = { P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, - P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0 + P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0 }; static struct platform_device bfin_sport1_uart_device = { @@ -1033,7 +1070,7 @@ static struct platform_device bfin_sport1_uart_device = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/gpio_keys.h> static struct gpio_keys_button bfin_gpio_keys_table[] = { @@ -1054,7 +1091,7 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif -#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) +#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY) #include <asm/bfin_rotary.h> static struct bfin_rotary_platform_data bfin_rotary_data = { @@ -1064,6 +1101,7 @@ static struct bfin_rotary_platform_data bfin_rotary_data = { .rotary_button_key = KEY_ENTER, .debounce = 10, /* 0..17 */ .mode = ROT_QUAD_ENC | ROT_DEBE, + .pm_wakeup = 1, }; static struct resource bfin_rotary_resources[] = { @@ -1111,56 +1149,56 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) &bf5xx_nand_device, #endif -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) &bfin_pcmcia_cf_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) &bfin_isp1760_device, #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) &musb_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +#if IS_ENABLED(CONFIG_DM9000) &dm9000_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_T350MCQB) &bf52x_t350mcqb_device, #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) &bfin_lq035q1_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -1169,7 +1207,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -1178,11 +1216,11 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -1191,24 +1229,32 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) +#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY) &bfin_rotary_device, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &ezkit_flash_device, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) + &bfin_i2s_pcm, +#endif + +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) + &bfin_ac97_pcm, +#endif + +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) &bfin_i2s, #endif -#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) - &bfin_tdm, +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) + &bfin_ad1836_machine, #endif }; @@ -1258,7 +1304,7 @@ void native_machine_restart(char *cmd) bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); } -void bfin_get_ether_addr(char *addr) +int bfin_get_ether_addr(char *addr) { /* the MAC is stored in OTP memory page 0xDF */ u32 ret; @@ -1271,5 +1317,6 @@ void bfin_get_ether_addr(char *addr) for (ret = 0; ret < 6; ++ret) addr[ret] = otp_mac_p[5 - ret]; } + return 0; } EXPORT_SYMBOL(bfin_get_ether_addr); |