diff options
Diffstat (limited to 'arch/blackfin/mach-bf527/boards/cm_bf527.c')
| -rw-r--r-- | arch/blackfin/mach-bf527/boards/cm_bf527.c | 869 |
1 files changed, 425 insertions, 444 deletions
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c index 0b26ae2de5e..b1004b35db3 100644 --- a/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -1,34 +1,14 @@ /* - * File: arch/blackfin/mach-bf527/boards/cm-bf527.c - * Based on: arch/blackfin/mach-bf537/boards/stamp.c - * Author: Aidan Williams <aidan@nicta.com.au> + * Copyright 2004-2009 Analog Devices Inc. + * 2008-2009 Bluetechnix + * 2005 National ICT Australia (NICTA) + * Aidan Williams <aidan@nicta.com.au> * - * Created: - * Description: - * - * Modified: - * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2008 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #include <linux/device.h> +#include <linux/export.h> #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -36,18 +16,10 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/etherdevice.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) -#include <linux/usb/isp1362.h> -#endif -#include <linux/pata_platform.h> #include <linux/i2c.h> #include <linux/irq.h> #include <linux/interrupt.h> -#include <linux/usb/sl811.h> -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) #include <linux/usb/musb.h> -#endif -#include <asm/cplb.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <asm/reboot.h> @@ -65,54 +37,42 @@ const char bfin_board_name[] = "Bluetechnix CM-BF527"; * Driver needs to know address, irq and flag pin. */ -#define ISP1761_BASE 0x203C0000 -#define ISP1761_IRQ IRQ_PF7 - -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) -static struct resource bfin_isp1761_resources[] = { +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) +#include <linux/usb/isp1760.h> +static struct resource bfin_isp1760_resources[] = { [0] = { - .name = "isp1761-regs", - .start = ISP1761_BASE + 0x00000000, - .end = ISP1761_BASE + 0x000fffff, + .start = 0x203C0000, + .end = 0x203C0000 + 0x000fffff, .flags = IORESOURCE_MEM, }, [1] = { - .start = ISP1761_IRQ, - .end = ISP1761_IRQ, + .start = IRQ_PF7, + .end = IRQ_PF7, .flags = IORESOURCE_IRQ, }, }; -static struct platform_device bfin_isp1761_device = { - .name = "isp1761", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_isp1761_resources), - .resource = bfin_isp1761_resources, +static struct isp1760_platform_data isp1760_priv = { + .is_isp1761 = 0, + .bus_width_16 = 1, + .port1_otg = 0, + .analog_oc = 0, + .dack_polarity_high = 0, + .dreq_polarity_high = 0, }; -static struct platform_device *bfin_isp1761_devices[] = { - &bfin_isp1761_device, +static struct platform_device bfin_isp1760_device = { + .name = "isp1760", + .id = 0, + .dev = { + .platform_data = &isp1760_priv, + }, + .num_resources = ARRAY_SIZE(bfin_isp1760_resources), + .resource = bfin_isp1760_resources, }; - -int __init bfin_isp1761_init(void) -{ - unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices); - - printk(KERN_INFO "%s(): registering device resources\n", __func__); - set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING); - - return platform_add_devices(bfin_isp1761_devices, num_devices); -} - -void __exit bfin_isp1761_exit(void) -{ - platform_device_unregister(&bfin_isp1761_device); -} - -arch_initcall(bfin_isp1761_init); #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) static struct resource musb_resources[] = { [0] = { .start = 0xffc03800, @@ -123,14 +83,31 @@ static struct resource musb_resources[] = { .start = IRQ_USB_INT0, .end = IRQ_USB_INT0, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + .name = "mc" }, [2] = { /* DMA IRQ */ .start = IRQ_USB_DMA, .end = IRQ_USB_DMA, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + .name = "dma" }, }; +static struct musb_hdrc_config musb_config = { + .multipoint = 0, + .dyn_fifo = 0, + .soft_con = 1, + .dma = 1, + .num_eps = 8, + .dma_channels = 8, + .gpio_vrsel = GPIO_PF11, + /* Some custom boards need to be active low, just set it to "0" + * if it is the case. + */ + .gpio_vrsel_active = 1, + .clkin = 24, /* musb CLKIN in MHZ */ +}; + static struct musb_hdrc_platform_data musb_plat = { #if defined(CONFIG_USB_MUSB_OTG) .mode = MUSB_OTG, @@ -139,13 +116,13 @@ static struct musb_hdrc_platform_data musb_plat = { #elif defined(CONFIG_USB_GADGET_MUSB_HDRC) .mode = MUSB_PERIPHERAL, #endif - .multipoint = 0, + .config = &musb_config, }; static u64 musb_dmamask = ~(u32)0; static struct platform_device musb_device = { - .name = "musb_hdrc", + .name = "musb-blackfin", .id = 0, .dev = { .dma_mask = &musb_dmamask, @@ -157,62 +134,21 @@ static struct platform_device musb_device = { }; #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) -static struct mtd_partition ezkit_partitions[] = { - { - .name = "Bootloader", - .size = 0x40000, - .offset = 0, - }, { - .name = "Kernel", - .size = 0x1C0000, - .offset = MTDPART_OFS_APPEND, - }, { - .name = "RootFS", - .size = MTDPART_SIZ_FULL, - .offset = MTDPART_OFS_APPEND, - } -}; - -static struct physmap_flash_data ezkit_flash_data = { - .width = 2, - .parts = ezkit_partitions, - .nr_parts = ARRAY_SIZE(ezkit_partitions), -}; - -static struct resource ezkit_flash_resource = { - .start = 0x20000000, - .end = 0x201fffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device ezkit_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &ezkit_flash_data, - }, - .num_resources = 1, - .resource = &ezkit_flash_resource, -}; -#endif - -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) static struct mtd_partition partition_info[] = { { - .name = "Linux Kernel", + .name = "linux kernel(nand)", .offset = 0, - .size = 4 * SIZE_1M, + .size = 4 * 1024 * 1024, }, { - .name = "File System", + .name = "file system(nand)", .offset = MTDPART_OFS_APPEND, .size = MTDPART_SIZ_FULL, }, }; static struct bf5xx_nand_platform bf5xx_nand_platform = { - .page_size = NFC_PG_SIZE_256, .data_width = NFC_NWIDTH_8, .partitions = partition_info, .nr_partitions = ARRAY_SIZE(partition_info), @@ -244,7 +180,7 @@ static struct platform_device bf5xx_nand_device = { }; #endif -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) static struct resource bfin_pcmcia_cf_resources[] = { { .start = 0x20310000, /* IO PORT */ @@ -273,14 +209,22 @@ static struct platform_device bfin_pcmcia_cf_device = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) +#include <linux/smc91x.h> + +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource smc91x_resources[] = { { .name = "smc91x-regs", @@ -299,17 +243,25 @@ static struct platform_device smc91x_device = { .id = 0, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, + .dev = { + .platform_data = &smc91x_info, + }, }; #endif -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +#if IS_ENABLED(CONFIG_DM9000) static struct resource dm9000_resources[] = { [0] = { .start = 0x203FB800, - .end = 0x203FB800 + 8, + .end = 0x203FB800 + 1, .flags = IORESOURCE_MEM, }, [1] = { + .start = 0x203FB804, + .end = 0x203FB804 + 1, + .flags = IORESOURCE_MEM, + }, + [2] = { .start = IRQ_PF9, .end = IRQ_PF9, .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE), @@ -324,96 +276,40 @@ static struct platform_device dm9000_device = { }; #endif -#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) -static struct resource sl811_hcd_resources[] = { - { - .start = 0x20340000, - .end = 0x20340000, - .flags = IORESOURCE_MEM, - }, { - .start = 0x20340004, - .end = 0x20340004, - .flags = IORESOURCE_MEM, - }, { - .start = CONFIG_USB_SL811_BFIN_IRQ, - .end = CONFIG_USB_SL811_BFIN_IRQ, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; +#if IS_ENABLED(CONFIG_BFIN_MAC) +#include <linux/bfin_mac.h> +static const unsigned short bfin_mac_peripherals[] = P_RMII0; -#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) -void sl811_port_power(struct device *dev, int is_on) -{ - gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); - gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on); -} -#endif - -static struct sl811_platform_data sl811_priv = { - .potpg = 10, - .power = 250, /* == 500mA */ -#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) - .port_power = &sl811_port_power, -#endif -}; - -static struct platform_device sl811_hcd_device = { - .name = "sl811-hcd", - .id = 0, - .dev = { - .platform_data = &sl811_priv, - }, - .num_resources = ARRAY_SIZE(sl811_hcd_resources), - .resource = sl811_hcd_resources, -}; -#endif - -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) -static struct resource isp1362_hcd_resources[] = { +static struct bfin_phydev_platform_data bfin_phydev_data[] = { { - .start = 0x20360000, - .end = 0x20360000, - .flags = IORESOURCE_MEM, - }, { - .start = 0x20360004, - .end = 0x20360004, - .flags = IORESOURCE_MEM, - }, { - .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, - .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + .addr = 1, + .irq = IRQ_MAC_PHYINT, }, }; -static struct isp1362_platform_data isp1362_priv = { - .sel15Kres = 1, - .clknotstop = 0, - .oc_enable = 0, - .int_act_high = 0, - .int_edge_triggered = 0, - .remote_wakeup_connected = 0, - .no_power_switching = 1, - .power_switching_mode = 0, +static struct bfin_mii_bus_platform_data bfin_mii_bus_data = { + .phydev_number = 1, + .phydev_data = bfin_phydev_data, + .phy_mode = PHY_INTERFACE_MODE_RMII, + .mac_peripherals = bfin_mac_peripherals, }; -static struct platform_device isp1362_hcd_device = { - .name = "isp1362-hcd", - .id = 0, +static struct platform_device bfin_mii_bus = { + .name = "bfin_mii_bus", .dev = { - .platform_data = &isp1362_priv, - }, - .num_resources = ARRAY_SIZE(isp1362_hcd_resources), - .resource = isp1362_hcd_resources, + .platform_data = &bfin_mii_bus_data, + } }; -#endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) static struct platform_device bfin_mac_device = { .name = "bfin_mac", + .dev = { + .platform_data = &bfin_mii_bus, + } }; #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x20300000, @@ -434,16 +330,15 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00040000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "linux kernel", + .name = "linux kernel(spi)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, } @@ -459,56 +354,16 @@ static struct flash_platform_data bfin_spi_flash_data = { /* SPI flash chip (m25p64) */ static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ - .bits_per_word = 8, }; #endif -#if defined(CONFIG_SPI_ADC_BF533) \ - || defined(CONFIG_SPI_ADC_BF533_MODULE) -/* SPI ADC chip */ -static struct bfin5xx_spi_chip spi_adc_chip_info = { - .enable_dma = 1, /* use dma transfer with this chip*/ - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_SND_BLACKFIN_AD1836) \ - || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) -static struct bfin5xx_spi_chip ad1836_spi_chip_info = { +#if IS_ENABLED(CONFIG_MMC_SPI) +static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, - .bits_per_word = 16, }; #endif -#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) -static struct bfin5xx_spi_chip ad9960_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { - .enable_dma = 1, - .bits_per_word = 8, -}; -#endif - -#if defined(CONFIG_PBX) -static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { - .ctl_reg = 0x4, /* send zero */ - .enable_dma = 0, - .bits_per_word = 8, - .cs_change_per_word = 1, -}; -#endif - -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) -static struct bfin5xx_spi_chip spi_ad7877_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; - +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -524,24 +379,8 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { }; #endif -#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ - && defined(CONFIG_SND_SOC_WM8731_SPI) -static struct bfin5xx_spi_chip spi_wm8731_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) -static struct bfin5xx_spi_chip spidev_chip_info = { - .enable_dma = 0, - .bits_per_word = 8, -}; -#endif - static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -554,76 +393,25 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_ADC_BF533) \ - || defined(CONFIG_SPI_ADC_BF533_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { - .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ - .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, /* Framework bus number */ - .chip_select = 1, /* Framework chip select. */ - .platform_data = NULL, /* No spi_driver specific config */ - .controller_data = &spi_adc_chip_info, - }, -#endif - -#if defined(CONFIG_SND_BLACKFIN_AD1836) \ - || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) - { - .modalias = "ad1836-spi", + .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, - .controller_data = &ad1836_spi_chip_info, + .chip_select = 4, }, #endif -#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { - .modalias = "ad9960-spi", - .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ + .modalias = "mmc_spi", + .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 1, - .controller_data = &ad9960_spi_chip_info, - }, -#endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) - { - .modalias = "spi_mmc_dummy", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 0, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, - { - .modalias = "spi_mmc", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, + .chip_select = 5, + .controller_data = &mmc_spi_chip_info, .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_PBX) - { - .modalias = "fxs-spi", - .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 8 - CONFIG_J11_JUMPER, - .controller_data = &spi_si3xxx_chip_info, - .mode = SPI_MODE_3, - }, - { - .modalias = "fxo-spi", - .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 8 - CONFIG_J19_JUMPER, - .controller_data = &spi_si3xxx_chip_info, - .mode = SPI_MODE_3, - }, -#endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, @@ -631,32 +419,29 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 2, - .controller_data = &spi_ad7877_chip_info, }, #endif -#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ +#if IS_ENABLED(CONFIG_SND_SOC_WM8731) \ && defined(CONFIG_SND_SOC_WM8731_SPI) { .modalias = "wm8731", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 5, - .controller_data = &spi_wm8731_chip_info, .mode = SPI_MODE_0, }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 1, - .controller_data = &spidev_chip_info, }, #endif }; -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI controller data */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, @@ -674,6 +459,11 @@ static struct resource bfin_spi0_resource[] = { [1] = { .start = CH_SPI, .end = CH_SPI, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = IRQ_SPI, + .end = IRQ_SPI, .flags = IORESOURCE_IRQ, }, }; @@ -689,65 +479,224 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) -static struct platform_device bfin_fb_adv7393_device = { - .name = "bfin-adv7393", +#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR) +static struct mtd_partition cm_partitions[] = { + { + .name = "bootloader(nor)", + .size = 0x40000, + .offset = 0, + }, { + .name = "linux kernel(nor)", + .size = 0x100000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "file system(nor)", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct physmap_flash_data cm_flash_data = { + .width = 2, + .parts = cm_partitions, + .nr_parts = ARRAY_SIZE(cm_partitions), +}; + +static unsigned cm_flash_gpios[] = { GPIO_PH9, GPIO_PG11 }; + +static struct resource cm_flash_resource[] = { + { + .name = "cfi_probe", + .start = 0x20000000, + .end = 0x201fffff, + .flags = IORESOURCE_MEM, + }, { + .start = (unsigned long)cm_flash_gpios, + .end = ARRAY_SIZE(cm_flash_gpios), + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device cm_flash_device = { + .name = "gpio-addr-flash", + .id = 0, + .dev = { + .platform_data = &cm_flash_data, + }, + .num_resources = ARRAY_SIZE(cm_flash_resource), + .resource = cm_flash_resource, }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) -static struct resource bfin_uart_resources[] = { +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 +static struct resource bfin_uart0_resources[] = { { - .start = 0xFFC00400, - .end = 0xFFC004FF, + .start = UART0_THR, + .end = UART0_GCTL+2, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART0_TX, + .end = IRQ_UART0_TX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART0_ERROR, + .end = IRQ_UART0_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_TX, + .end = CH_UART0_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static unsigned short bfin_uart0_peripherals[] = { + P_UART0_TX, P_UART0_RX, 0 +}; + +static struct platform_device bfin_uart0_device = { + .name = "bfin-uart", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_uart0_resources), + .resource = bfin_uart0_resources, + .dev = { + .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ + }, +}; #endif #ifdef CONFIG_SERIAL_BFIN_UART1 +static struct resource bfin_uart1_resources[] = { { - .start = 0xFFC02000, - .end = 0xFFC020FF, + .start = UART1_THR, + .end = UART1_GCTL+2, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART1_TX, + .end = IRQ_UART1_TX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART1_RX, + .end = IRQ_UART1_RX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART1_ERROR, + .end = IRQ_UART1_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART1_TX, + .end = CH_UART1_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART1_RX, + .end = CH_UART1_RX, + .flags = IORESOURCE_DMA, + }, +#ifdef CONFIG_BFIN_UART1_CTSRTS + { /* CTS pin */ + .start = GPIO_PF9, + .end = GPIO_PF9, + .flags = IORESOURCE_IO, + }, + { /* RTS pin */ + .start = GPIO_PF10, + .end = GPIO_PF10, + .flags = IORESOURCE_IO, + }, #endif }; -static struct platform_device bfin_uart_device = { +static unsigned short bfin_uart1_peripherals[] = { + P_UART1_TX, P_UART1_RX, 0 +}; + +static struct platform_device bfin_uart1_device = { .name = "bfin-uart", .id = 1, - .num_resources = ARRAY_SIZE(bfin_uart_resources), - .resource = bfin_uart_resources, + .num_resources = ARRAY_SIZE(bfin_uart1_resources), + .resource = bfin_uart1_resources, + .dev = { + .platform_data = &bfin_uart1_peripherals, /* Passed to driver */ + }, }; #endif +#endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -static struct resource bfin_sir_resources[] = { +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 +static struct resource bfin_sir0_resources[] = { { .start = 0xFFC00400, .end = 0xFFC004FF, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX+1, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device bfin_sir0_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir0_resources), + .resource = bfin_sir0_resources, +}; #endif #ifdef CONFIG_BFIN_SIR1 +static struct resource bfin_sir1_resources[] = { { .start = 0xFFC02000, .end = 0xFFC020FF, .flags = IORESOURCE_MEM, }, -#endif + { + .start = IRQ_UART1_RX, + .end = IRQ_UART1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART1_RX, + .end = CH_UART1_RX+1, + .flags = IORESOURCE_DMA, + }, }; -static struct platform_device bfin_sir_device = { +static struct platform_device bfin_sir1_device = { .name = "bfin_sir", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_sir_resources), - .resource = bfin_sir_resources, + .id = 1, + .num_resources = ARRAY_SIZE(bfin_sir1_resources), + .resource = bfin_sir1_resources, }; #endif +#endif + +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) +static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) static struct resource bfin_twi0_resource[] = { [0] = { .start = TWI0_REGBASE, @@ -766,77 +715,103 @@ static struct platform_device i2c_bfin_twi_device = { .id = 0, .num_resources = ARRAY_SIZE(bfin_twi0_resource), .resource = bfin_twi0_resource, + .dev = { + .platform_data = &bfin_twi0_pins, + }, }; #endif -#ifdef CONFIG_I2C_BOARDINFO static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), - .type = "pcf8574_lcd", }, #endif -#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE) +#if IS_ENABLED(CONFIG_INPUT_PCF8574) { I2C_BOARD_INFO("pcf8574_keypad", 0x27), - .type = "pcf8574_keypad", .irq = IRQ_PF8, }, #endif -}; +#if IS_ENABLED(CONFIG_FB_BFIN_7393) + { + I2C_BOARD_INFO("bfin-adv7393", 0x2B), + }, #endif - -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) -static struct platform_device bfin_sport0_uart_device = { - .name = "bfin-sport-uart", - .id = 0, }; -static struct platform_device bfin_sport1_uart_device = { - .name = "bfin-sport-uart", - .id = 1, +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART +static struct resource bfin_sport0_uart_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, }; -#endif - -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) -#define PATA_INT 55 -static struct pata_platform_info bfin_pata_platform_data = { - .ioport_shift = 1, - .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, +static unsigned short bfin_sport0_peripherals[] = { + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0 }; -static struct resource bfin_pata_resources[] = { +static struct platform_device bfin_sport0_uart_device = { + .name = "bfin-sport-uart", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources), + .resource = bfin_sport0_uart_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART +static struct resource bfin_sport1_uart_resources[] = { { - .start = 0x20314020, - .end = 0x2031403F, + .start = SPORT1_TCR1, + .end = SPORT1_MRCS3+4, .flags = IORESOURCE_MEM, }, { - .start = 0x2031401C, - .end = 0x2031401F, - .flags = IORESOURCE_MEM, + .start = IRQ_SPORT1_RX, + .end = IRQ_SPORT1_RX+1, + .flags = IORESOURCE_IRQ, }, { - .start = PATA_INT, - .end = PATA_INT, + .start = IRQ_SPORT1_ERROR, + .end = IRQ_SPORT1_ERROR, .flags = IORESOURCE_IRQ, }, }; -static struct platform_device bfin_pata_device = { - .name = "pata_platform", - .id = -1, - .num_resources = ARRAY_SIZE(bfin_pata_resources), - .resource = bfin_pata_resources, +static unsigned short bfin_sport1_peripherals[] = { + P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, + P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0 +}; + +static struct platform_device bfin_sport1_uart_device = { + .name = "bfin-sport-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources), + .resource = bfin_sport1_uart_resources, .dev = { - .platform_data = &bfin_pata_platform_data, - } + .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ + }, }; #endif +#endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -857,19 +832,6 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif -static struct resource bfin_gpios_resources = { - .start = 0, - .end = MAX_BLACKFIN_GPIOS - 1, - .flags = IORESOURCE_IRQ, -}; - -static struct platform_device bfin_gpios_device = { - .name = "simple-gpio", - .id = -1, - .num_resources = 1, - .resource = &bfin_gpios_resources, -}; - static const unsigned int cclk_vlev_datasheet[] = { VRPAIR(VLEV_100, 400000000), @@ -892,120 +854,139 @@ static struct platform_device bfin_dpmc = { }, }; -static struct platform_device *stamp_devices[] __initdata = { +static struct platform_device *cmbf527_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) &bf5xx_nand_device, #endif -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) &bfin_pcmcia_cf_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) - &sl811_hcd_device, -#endif - -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) - &isp1362_hcd_device, +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) + &bfin_isp1760_device, #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) &musb_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +#if IS_ENABLED(CONFIG_DM9000) &dm9000_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) + &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) - &bfin_fb_adv7393_device, +#if IS_ENABLED(CONFIG_SERIAL_BFIN) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, #endif - -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) - &bfin_uart_device, #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) - &bfin_sir_device, +#if IS_ENABLED(CONFIG_BFIN_SIR) +#ifdef CONFIG_BFIN_SIR0 + &bfin_sir0_device, +#endif +#ifdef CONFIG_BFIN_SIR1 + &bfin_sir1_device, +#endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART &bfin_sport1_uart_device, #endif - -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - &bfin_pata_device, #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) - &ezkit_flash_device, +#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR) + &cm_flash_device, #endif - - &bfin_gpios_device, }; -static int __init stamp_init(void) +static int __init cm_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); - -#ifdef CONFIG_I2C_BOARDINFO i2c_register_board_info(0, bfin_i2c_board_info, ARRAY_SIZE(bfin_i2c_board_info)); -#endif - - platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); + platform_add_devices(cmbf527_devices, ARRAY_SIZE(cmbf527_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); - -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; -#endif return 0; } -arch_initcall(stamp_init); +arch_initcall(cm_init); + +static struct platform_device *cmbf527_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(cmbf527_early_devices, + ARRAY_SIZE(cmbf527_early_devices)); +} void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ if ((bfin_read_SYSCR() & 0x7) == 0x3) - bfin_gpio_reset_spi0_ssel1(); + bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); } -void bfin_get_ether_addr(char *addr) +int bfin_get_ether_addr(char *addr) { - random_ether_addr(addr); - printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__); + return 1; } EXPORT_SYMBOL(bfin_get_ether_addr); |