diff options
Diffstat (limited to 'arch/blackfin/kernel/time.c')
| -rw-r--r-- | arch/blackfin/kernel/time.c | 147 |
1 files changed, 20 insertions, 127 deletions
diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c index 1bbacfbd4c5..3126b920a4a 100644 --- a/arch/blackfin/kernel/time.c +++ b/arch/blackfin/kernel/time.c @@ -14,6 +14,7 @@ #include <linux/time.h> #include <linux/irq.h> #include <linux/delay.h> +#include <linux/sched.h> #include <asm/blackfin.h> #include <asm/time.h> @@ -24,14 +25,9 @@ static struct irqaction bfin_timer_irq = { .name = "Blackfin Timer Tick", -#ifdef CONFIG_IRQ_PER_CPU - .flags = IRQF_DISABLED | IRQF_PERCPU, -#else - .flags = IRQF_DISABLED -#endif }; -#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE) +#if defined(CONFIG_IPIPE) void __init setup_system_timer0(void) { /* Power down the core timer, just to play safe. */ @@ -54,7 +50,7 @@ void __init setup_core_timer(void) u32 tcount; /* power up the timer, but don't enable it just yet */ - bfin_write_TCNTL(1); + bfin_write_TCNTL(TMPWR); CSYNC(); /* the TSCALE prescaler counter */ @@ -67,14 +63,14 @@ void __init setup_core_timer(void) /* now enable the timer */ CSYNC(); - bfin_write_TCNTL(7); + bfin_write_TCNTL(TAUTORLD | TMREN | TMPWR); } #endif static void __init time_sched_init(irqreturn_t(*timer_routine) (int, void *)) { -#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE) +#if defined(CONFIG_IPIPE) setup_system_timer0(); bfin_timer_irq.handler = timer_routine; setup_irq(IRQ_TIMER0, &bfin_timer_irq); @@ -85,16 +81,16 @@ time_sched_init(irqreturn_t(*timer_routine) (int, void *)) #endif } +#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET /* * Should return useconds since last timer tick */ -#ifndef CONFIG_GENERIC_TIME -static unsigned long gettimeoffset(void) +static u32 blackfin_gettimeoffset(void) { unsigned long offset; unsigned long clocks_per_jiffy; -#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE) +#if defined(CONFIG_IPIPE) clocks_per_jiffy = bfin_read_TIMER0_PERIOD(); offset = bfin_read_TIMER0_COUNTER() / \ (((clocks_per_jiffy + 1) * HZ) / USEC_PER_SEC); @@ -115,55 +111,16 @@ static unsigned long gettimeoffset(void) } #endif -static inline int set_rtc_mmss(unsigned long nowtime) -{ - return 0; -} - /* * timer_interrupt() needs to keep up the real-time clock, - * as well as call the "do_timer()" routine every clocktick + * as well as call the "xtime_update()" routine every clocktick */ #ifdef CONFIG_CORE_TIMER_IRQ_L1 __attribute__((l1_text)) #endif irqreturn_t timer_interrupt(int irq, void *dummy) { - /* last time the cmos clock got updated */ - static long last_rtc_update; - - write_seqlock(&xtime_lock); -#if defined(CONFIG_TICK_SOURCE_SYSTMR0) && !defined(CONFIG_IPIPE) - /* - * TIMIL0 is latched in __ipipe_grab_irq() when the I-Pipe is - * enabled. - */ - if (get_gptimer_status(0) & TIMER_STATUS_TIMIL0) { -#endif - do_timer(1); - - /* - * If we have an externally synchronized Linux clock, then update - * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be - * called as close as possible to 500 ms before the new second starts. - */ - if (ntp_synced() && - xtime.tv_sec > last_rtc_update + 660 && - (xtime.tv_nsec / NSEC_PER_USEC) >= - 500000 - ((unsigned)TICK_SIZE) / 2 - && (xtime.tv_nsec / NSEC_PER_USEC) <= - 500000 + ((unsigned)TICK_SIZE) / 2) { - if (set_rtc_mmss(xtime.tv_sec) == 0) - last_rtc_update = xtime.tv_sec; - else - /* Do it again in 60s. */ - last_rtc_update = xtime.tv_sec - 600; - } -#if defined(CONFIG_TICK_SOURCE_SYSTMR0) && !defined(CONFIG_IPIPE) - set_gptimer_status(0, TIMER_STATUS_TIMIL0); - } -#endif - write_sequnlock(&xtime_lock); + xtime_update(1); #ifdef CONFIG_IPIPE update_root_process_times(get_irq_regs()); @@ -175,9 +132,18 @@ irqreturn_t timer_interrupt(int irq, void *dummy) return IRQ_HANDLED; } -void __init time_init(void) +void read_persistent_clock(struct timespec *ts) { time_t secs_since_1970 = (365 * 37 + 9) * 24 * 60 * 60; /* 1 Jan 2007 */ + ts->tv_sec = secs_since_1970; + ts->tv_nsec = 0; +} + +void __init time_init(void) +{ +#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET + arch_gettimeoffset = blackfin_gettimeoffset; +#endif #ifdef CONFIG_RTC_DRV_BFIN /* [#2663] hack to filter junk RTC values that would cause @@ -190,78 +156,5 @@ void __init time_init(void) } #endif - /* Initialize xtime. From now on, xtime is updated with timer interrupts */ - xtime.tv_sec = secs_since_1970; - xtime.tv_nsec = 0; - - wall_to_monotonic.tv_sec = -xtime.tv_sec; - time_sched_init(timer_interrupt); } - -#ifndef CONFIG_GENERIC_TIME -void do_gettimeofday(struct timeval *tv) -{ - unsigned long flags; - unsigned long seq; - unsigned long usec, sec; - - do { - seq = read_seqbegin_irqsave(&xtime_lock, flags); - usec = gettimeoffset(); - sec = xtime.tv_sec; - usec += (xtime.tv_nsec / NSEC_PER_USEC); - } - while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); - - while (usec >= USEC_PER_SEC) { - usec -= USEC_PER_SEC; - sec++; - } - - tv->tv_sec = sec; - tv->tv_usec = usec; -} -EXPORT_SYMBOL(do_gettimeofday); - -int do_settimeofday(struct timespec *tv) -{ - time_t wtm_sec, sec = tv->tv_sec; - long wtm_nsec, nsec = tv->tv_nsec; - - if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC) - return -EINVAL; - - write_seqlock_irq(&xtime_lock); - /* - * This is revolting. We need to set the xtime.tv_usec - * correctly. However, the value in this location is - * is value at the last tick. - * Discover what correction gettimeofday - * would have done, and then undo it! - */ - nsec -= (gettimeoffset() * NSEC_PER_USEC); - - wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec); - wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec); - - set_normalized_timespec(&xtime, sec, nsec); - set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - - ntp_clear(); - - write_sequnlock_irq(&xtime_lock); - clock_was_set(); - - return 0; -} -EXPORT_SYMBOL(do_settimeofday); -#endif /* !CONFIG_GENERIC_TIME */ - -/* - * Scheduler clock - returns current time in nanosec units. - */ -unsigned long long sched_clock(void) -{ - return (unsigned long long)jiffies *(NSEC_PER_SEC / HZ); -} |