aboutsummaryrefslogtreecommitdiff
path: root/arch/avr32/boards
diff options
context:
space:
mode:
Diffstat (limited to 'arch/avr32/boards')
-rw-r--r--arch/avr32/boards/atngw100/evklcd10x.c8
-rw-r--r--arch/avr32/boards/atngw100/mrmt.c7
-rw-r--r--arch/avr32/boards/atngw100/setup.c15
-rw-r--r--arch/avr32/boards/atstk1000/atstk1000.h2
-rw-r--r--arch/avr32/boards/atstk1000/atstk1002.c14
-rw-r--r--arch/avr32/boards/atstk1000/setup.c2
-rw-r--r--arch/avr32/boards/favr-32/setup.c10
-rw-r--r--arch/avr32/boards/hammerhead/setup.c6
-rw-r--r--arch/avr32/boards/merisc/display.c2
-rw-r--r--arch/avr32/boards/merisc/merisc_sysfs.c1
-rw-r--r--arch/avr32/boards/merisc/setup.c4
-rw-r--r--arch/avr32/boards/mimc200/Makefile2
-rw-r--r--arch/avr32/boards/mimc200/fram.c81
-rw-r--r--arch/avr32/boards/mimc200/setup.c8
14 files changed, 37 insertions, 125 deletions
diff --git a/arch/avr32/boards/atngw100/evklcd10x.c b/arch/avr32/boards/atngw100/evklcd10x.c
index 20388750d56..64919b0da7a 100644
--- a/arch/avr32/boards/atngw100/evklcd10x.c
+++ b/arch/avr32/boards/atngw100/evklcd10x.c
@@ -58,7 +58,7 @@ static struct fb_monspecs __initdata atevklcd10x_default_monspecs = {
.dclkmax = 28330000,
};
-static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = {
+static struct atmel_lcdfb_pdata __initdata atevklcd10x_lcdc_data = {
.default_bpp = 16,
.default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
.default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT
@@ -96,7 +96,7 @@ static struct fb_monspecs __initdata atevklcd10x_default_monspecs = {
.dclkmax = 7000000,
};
-static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = {
+static struct atmel_lcdfb_pdata __initdata atevklcd10x_lcdc_data = {
.default_bpp = 16,
.default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
.default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT
@@ -134,7 +134,7 @@ static struct fb_monspecs __initdata atevklcd10x_default_monspecs = {
.dclkmax = 6400000,
};
-static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = {
+static struct atmel_lcdfb_pdata __initdata atevklcd10x_lcdc_data = {
.default_bpp = 16,
.default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
.default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT
@@ -145,7 +145,7 @@ static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = {
};
#endif
-static void atevklcd10x_lcdc_power_control(int on)
+static void atevklcd10x_lcdc_power_control(struct atmel_lcdfb_pdata *pdata, int on)
{
gpio_set_value(GPIO_PIN_PB(15), on);
}
diff --git a/arch/avr32/boards/atngw100/mrmt.c b/arch/avr32/boards/atngw100/mrmt.c
index 7919be311f4..1ba09e4c02b 100644
--- a/arch/avr32/boards/atngw100/mrmt.c
+++ b/arch/avr32/boards/atngw100/mrmt.c
@@ -83,7 +83,7 @@ static struct fb_monspecs __initdata lcd_fb_default_monspecs = {
.dclkmax = 9260000,
};
-static struct atmel_lcdfb_info __initdata rmt_lcdc_data = {
+static struct atmel_lcdfb_pdata __initdata rmt_lcdc_data = {
.default_bpp = 24,
.default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
.default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT
@@ -126,7 +126,7 @@ static struct fb_monspecs __initdata lcd_fb_default_monspecs = {
.dclkmax = 9260000,
};
-static struct atmel_lcdfb_info __initdata rmt_lcdc_data = {
+static struct atmel_lcdfb_pdata __initdata rmt_lcdc_data = {
.default_bpp = 24,
.default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
.default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT
@@ -150,7 +150,6 @@ static struct ac97c_platform_data __initdata ac97c0_data = {
static struct platform_device rmt_ts_device = {
.name = "ucb1400_ts",
.id = -1,
- }
};
#endif
@@ -301,7 +300,7 @@ static int __init mrmt1_init(void)
/* Select the Touchscreen interrupt pin mode */
at32_select_periph( GPIO_PIOB_BASE, 1 << (PB_EXTINT_BASE+TS_IRQ),
GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
- set_irq_type( AT32_EXTINT(TS_IRQ), IRQ_TYPE_EDGE_FALLING );
+ irq_set_irq_type(AT32_EXTINT(TS_IRQ), IRQ_TYPE_EDGE_FALLING);
at32_spi_setup_slaves(0,spi01_board_info,ARRAY_SIZE(spi01_board_info));
spi_register_board_info(spi01_board_info,ARRAY_SIZE(spi01_board_info));
#endif
diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index 8c6a2440e34..afeae8978a8 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -90,11 +90,6 @@ static struct mtd_partition nand_partitions[] = {
},
};
-static struct mtd_partition *nand_part_info(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(nand_partitions);
- return nand_partitions;
-}
static struct atmel_nand_data atngw100mkii_nand_data __initdata = {
.cle = 21,
@@ -102,7 +97,9 @@ static struct atmel_nand_data atngw100mkii_nand_data __initdata = {
.rdy_pin = GPIO_PIN_PB(28),
.enable_pin = GPIO_PIN_PE(23),
.bus_width_16 = true,
- .partition_info = nand_part_info,
+ .ecc_mode = NAND_ECC_SOFT,
+ .parts = nand_partitions,
+ .num_parts = ARRAY_SIZE(nand_partitions),
};
#endif
@@ -113,7 +110,7 @@ struct eth_addr {
u8 addr[6];
};
static struct eth_addr __initdata hw_addr[2];
-static struct eth_platform_data __initdata eth_data[2];
+static struct macb_platform_data __initdata eth_data[2];
static struct spi_board_info spi0_board_info[] __initdata = {
{
@@ -188,7 +185,7 @@ static void __init set_hw_addr(struct platform_device *pdev)
*/
regs = (void __iomem __force *)res->start;
pclk = clk_get(&pdev->dev, "pclk");
- if (!pclk)
+ if (IS_ERR(pclk))
return;
clk_enable(pclk);
@@ -322,6 +319,6 @@ static int __init atngw100_arch_init(void)
/* set_irq_type() after the arch_initcall for EIC has run, and
* before the I2C subsystem could try using this IRQ.
*/
- return set_irq_type(AT32_EXTINT(3), IRQ_TYPE_EDGE_FALLING);
+ return irq_set_irq_type(AT32_EXTINT(3), IRQ_TYPE_EDGE_FALLING);
}
arch_initcall(atngw100_arch_init);
diff --git a/arch/avr32/boards/atstk1000/atstk1000.h b/arch/avr32/boards/atstk1000/atstk1000.h
index 9392d325286..653cc09e536 100644
--- a/arch/avr32/boards/atstk1000/atstk1000.h
+++ b/arch/avr32/boards/atstk1000/atstk1000.h
@@ -10,7 +10,7 @@
#ifndef __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H
#define __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H
-extern struct atmel_lcdfb_info atstk1000_lcdc_data;
+extern struct atmel_lcdfb_pdata atstk1000_lcdc_data;
void atstk1000_setup_j2_leds(void);
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index 2adc261c9e3..6c80aba7bf9 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -90,18 +90,14 @@ static struct mtd_partition nand_partitions[] = {
},
};
-static struct mtd_partition *nand_part_info(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(nand_partitions);
- return nand_partitions;
-}
-
static struct atmel_nand_data atstk1006_nand_data __initdata = {
.cle = 21,
.ale = 22,
.rdy_pin = GPIO_PIN_PB(30),
.enable_pin = GPIO_PIN_PB(29),
- .partition_info = nand_part_info,
+ .ecc_mode = NAND_ECC_SOFT,
+ .parts = nand_partitions,
+ .num_parts = ARRAY_SIZE(nand_partitions),
};
#endif
@@ -110,7 +106,7 @@ struct eth_addr {
};
static struct eth_addr __initdata hw_addr[2];
-static struct eth_platform_data __initdata eth_data[2] = {
+static struct macb_platform_data __initdata eth_data[2] = {
{
/*
* The MDIO pullups on STK1000 are a bit too weak for
@@ -203,7 +199,7 @@ static void __init set_hw_addr(struct platform_device *pdev)
*/
regs = (void __iomem __force *)res->start;
pclk = clk_get(&pdev->dev, "pclk");
- if (!pclk)
+ if (IS_ERR(pclk))
return;
clk_enable(pclk);
diff --git a/arch/avr32/boards/atstk1000/setup.c b/arch/avr32/boards/atstk1000/setup.c
index 2d6b560115d..b6b88f5e0b4 100644
--- a/arch/avr32/boards/atstk1000/setup.c
+++ b/arch/avr32/boards/atstk1000/setup.c
@@ -55,7 +55,7 @@ static struct fb_monspecs __initdata atstk1000_default_monspecs = {
.dclkmax = 30000000,
};
-struct atmel_lcdfb_info __initdata atstk1000_lcdc_data = {
+struct atmel_lcdfb_pdata __initdata atstk1000_lcdc_data = {
.default_bpp = 24,
.default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
.default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT
diff --git a/arch/avr32/boards/favr-32/setup.c b/arch/avr32/boards/favr-32/setup.c
index 75f19f47fb2..1f121497b51 100644
--- a/arch/avr32/boards/favr-32/setup.c
+++ b/arch/avr32/boards/favr-32/setup.c
@@ -50,7 +50,7 @@ struct eth_addr {
u8 addr[6];
};
static struct eth_addr __initdata hw_addr[1];
-static struct eth_platform_data __initdata eth_data[1] = {
+static struct macb_platform_data __initdata eth_data[1] = {
{
.phy_mask = ~(1U << 1),
},
@@ -125,7 +125,7 @@ static struct fb_monspecs __initdata favr32_default_monspecs = {
.dclkmax = 28000000,
};
-struct atmel_lcdfb_info __initdata favr32_lcdc_data = {
+struct atmel_lcdfb_pdata __initdata favr32_lcdc_data = {
.default_bpp = 16,
.default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
.default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT
@@ -206,7 +206,7 @@ static void __init set_hw_addr(struct platform_device *pdev)
*/
regs = (void __iomem __force *)res->start;
pclk = clk_get(&pdev->dev, "pclk");
- if (!pclk)
+ if (IS_ERR(pclk))
return;
clk_enable(pclk);
@@ -298,8 +298,10 @@ static int __init set_abdac_rate(struct platform_device *pdev)
*/
retval = clk_round_rate(pll1,
CONFIG_BOARD_FAVR32_ABDAC_RATE * 256 * 16);
- if (retval < 0)
+ if (retval <= 0) {
+ retval = -EINVAL;
goto out_abdac;
+ }
retval = clk_set_rate(pll1, retval);
if (retval != 0)
diff --git a/arch/avr32/boards/hammerhead/setup.c b/arch/avr32/boards/hammerhead/setup.c
index dd009875a40..dc0e317f2ec 100644
--- a/arch/avr32/boards/hammerhead/setup.c
+++ b/arch/avr32/boards/hammerhead/setup.c
@@ -77,7 +77,7 @@ static struct fb_monspecs __initdata hammerhead_hda350t_monspecs = {
.dclkmax = 10000000,
};
-struct atmel_lcdfb_info __initdata hammerhead_lcdc_data = {
+struct atmel_lcdfb_pdata __initdata hammerhead_lcdc_data = {
.default_bpp = 24,
.default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
.default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT
@@ -102,7 +102,7 @@ struct eth_addr {
};
static struct eth_addr __initdata hw_addr[1];
-static struct eth_platform_data __initdata eth_data[1];
+static struct macb_platform_data __initdata eth_data[1];
/*
* The next two functions should go away as the boot loader is
@@ -150,7 +150,7 @@ static void __init set_hw_addr(struct platform_device *pdev)
regs = (void __iomem __force *)res->start;
pclk = clk_get(&pdev->dev, "pclk");
- if (!pclk)
+ if (IS_ERR(pclk))
return;
clk_enable(pclk);
diff --git a/arch/avr32/boards/merisc/display.c b/arch/avr32/boards/merisc/display.c
index 85a543cd4ab..e7683ee7ed4 100644
--- a/arch/avr32/boards/merisc/display.c
+++ b/arch/avr32/boards/merisc/display.c
@@ -45,7 +45,7 @@ static struct fb_monspecs merisc_fb_monspecs = {
.dclkmax = 30000000,
};
-struct atmel_lcdfb_info merisc_lcdc_data = {
+struct atmel_lcdfb_pdata merisc_lcdc_data = {
.default_bpp = 24,
.default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
.default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT
diff --git a/arch/avr32/boards/merisc/merisc_sysfs.c b/arch/avr32/boards/merisc/merisc_sysfs.c
index df431fdba9a..5a252318f4b 100644
--- a/arch/avr32/boards/merisc/merisc_sysfs.c
+++ b/arch/avr32/boards/merisc/merisc_sysfs.c
@@ -13,7 +13,6 @@
#include <linux/list.h>
#include <linux/spinlock.h>
#include <linux/device.h>
-#include <linux/sysdev.h>
#include <linux/timer.h>
#include <linux/err.h>
#include <linux/ctype.h>
diff --git a/arch/avr32/boards/merisc/setup.c b/arch/avr32/boards/merisc/setup.c
index 623b077594f..ed137e33579 100644
--- a/arch/avr32/boards/merisc/setup.c
+++ b/arch/avr32/boards/merisc/setup.c
@@ -52,7 +52,7 @@ struct eth_addr {
};
static struct eth_addr __initdata hw_addr[2];
-static struct eth_platform_data __initdata eth_data[2];
+static struct macb_platform_data __initdata eth_data[2];
static int ads7846_get_pendown_state_PB26(void)
{
@@ -134,7 +134,7 @@ static void __init set_hw_addr(struct platform_device *pdev)
regs = (void __iomem __force *)res->start;
pclk = clk_get(&pdev->dev, "pclk");
- if (!pclk)
+ if (IS_ERR(pclk))
return;
clk_enable(pclk);
diff --git a/arch/avr32/boards/mimc200/Makefile b/arch/avr32/boards/mimc200/Makefile
index 79c076e168a..c740aa11675 100644
--- a/arch/avr32/boards/mimc200/Makefile
+++ b/arch/avr32/boards/mimc200/Makefile
@@ -1 +1 @@
-obj-y += setup.o flash.o fram.o
+obj-y += setup.o flash.o
diff --git a/arch/avr32/boards/mimc200/fram.c b/arch/avr32/boards/mimc200/fram.c
deleted file mode 100644
index 9764a1a1073..00000000000
--- a/arch/avr32/boards/mimc200/fram.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * FRAM driver for MIMC200 board
- *
- * Copyright 2008 Mark Jackson <mpfj@mimc.co.uk>
- *
- * This module adds *very* simply support for the system's FRAM device.
- * At the moment, this is hard-coded to the MIMC200 platform, and only
- * supports mmap().
- */
-
-#define FRAM_VERSION "1.0"
-
-#include <linux/miscdevice.h>
-#include <linux/proc_fs.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-
-#define FRAM_BASE 0xac000000
-#define FRAM_SIZE 0x20000
-
-/*
- * The are the file operation function for user access to /dev/fram
- */
-
-static int fram_mmap(struct file *filp, struct vm_area_struct *vma)
-{
- int ret;
-
- ret = remap_pfn_range(vma,
- vma->vm_start,
- virt_to_phys((void *)((unsigned long)FRAM_BASE)) >> PAGE_SHIFT,
- vma->vm_end-vma->vm_start,
- PAGE_SHARED);
-
- if (ret != 0)
- return -EAGAIN;
-
- return 0;
-}
-
-static const struct file_operations fram_fops = {
- .owner = THIS_MODULE,
- .mmap = fram_mmap,
- .llseek = noop_llseek,
-};
-
-#define FRAM_MINOR 0
-
-static struct miscdevice fram_dev = {
- FRAM_MINOR,
- "fram",
- &fram_fops
-};
-
-static int __init
-fram_init(void)
-{
- int ret;
-
- ret = misc_register(&fram_dev);
- if (ret) {
- printk(KERN_ERR "fram: can't misc_register on minor=%d\n",
- FRAM_MINOR);
- return ret;
- }
- printk(KERN_INFO "FRAM memory driver v" FRAM_VERSION "\n");
- return 0;
-}
-
-static void __exit
-fram_cleanup_module(void)
-{
- misc_deregister(&fram_dev);
-}
-
-module_init(fram_init);
-module_exit(fram_cleanup_module);
-
-MODULE_LICENSE("GPL");
-
-MODULE_ALIAS_MISCDEV(FRAM_MINOR);
diff --git a/arch/avr32/boards/mimc200/setup.c b/arch/avr32/boards/mimc200/setup.c
index 523d8e183be..1cb8e9cc5cf 100644
--- a/arch/avr32/boards/mimc200/setup.c
+++ b/arch/avr32/boards/mimc200/setup.c
@@ -8,7 +8,7 @@
* published by the Free Software Foundation.
*/
-extern struct atmel_lcdfb_info mimc200_lcdc_data;
+extern struct atmel_lcdfb_pdata mimc200_lcdc_data;
#include <linux/clk.h>
#include <linux/etherdevice.h>
@@ -71,7 +71,7 @@ static struct fb_monspecs __initdata mimc200_default_monspecs = {
.dclkmax = 25200000,
};
-struct atmel_lcdfb_info __initdata mimc200_lcdc_data = {
+struct atmel_lcdfb_pdata __initdata mimc200_lcdc_data = {
.default_bpp = 16,
.default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
.default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT
@@ -86,7 +86,7 @@ struct eth_addr {
u8 addr[6];
};
static struct eth_addr __initdata hw_addr[2];
-static struct eth_platform_data __initdata eth_data[2];
+static struct macb_platform_data __initdata eth_data[2];
static struct spi_eeprom eeprom_25lc010 = {
.name = "25lc010",
@@ -162,7 +162,7 @@ static void __init set_hw_addr(struct platform_device *pdev)
*/
regs = (void __iomem __force *)res->start;
pclk = clk_get(&pdev->dev, "pclk");
- if (!pclk)
+ if (IS_ERR(pclk))
return;
clk_enable(pclk);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-11-05 03:11:52 +0000