diff options
Diffstat (limited to 'arch/avr32/boards/mimc200')
| -rw-r--r-- | arch/avr32/boards/mimc200/Makefile | 2 | ||||
| -rw-r--r-- | arch/avr32/boards/mimc200/fram.c | 80 | ||||
| -rw-r--r-- | arch/avr32/boards/mimc200/setup.c | 45 |
3 files changed, 24 insertions, 103 deletions
diff --git a/arch/avr32/boards/mimc200/Makefile b/arch/avr32/boards/mimc200/Makefile index 79c076e168a..c740aa11675 100644 --- a/arch/avr32/boards/mimc200/Makefile +++ b/arch/avr32/boards/mimc200/Makefile @@ -1 +1 @@ -obj-y += setup.o flash.o fram.o +obj-y += setup.o flash.o diff --git a/arch/avr32/boards/mimc200/fram.c b/arch/avr32/boards/mimc200/fram.c deleted file mode 100644 index 54fbd95cee9..00000000000 --- a/arch/avr32/boards/mimc200/fram.c +++ /dev/null @@ -1,80 +0,0 @@ -/* - * FRAM driver for MIMC200 board - * - * Copyright 2008 Mark Jackson <mpfj@mimc.co.uk> - * - * This module adds *very* simply support for the system's FRAM device. - * At the moment, this is hard-coded to the MIMC200 platform, and only - * supports mmap(). - */ - -#define FRAM_VERSION "1.0" - -#include <linux/miscdevice.h> -#include <linux/proc_fs.h> -#include <linux/mm.h> -#include <linux/io.h> - -#define FRAM_BASE 0xac000000 -#define FRAM_SIZE 0x20000 - -/* - * The are the file operation function for user access to /dev/fram - */ - -static int fram_mmap(struct file *filp, struct vm_area_struct *vma) -{ - int ret; - - ret = remap_pfn_range(vma, - vma->vm_start, - virt_to_phys((void *)((unsigned long)FRAM_BASE)) >> PAGE_SHIFT, - vma->vm_end-vma->vm_start, - PAGE_SHARED); - - if (ret != 0) - return -EAGAIN; - - return 0; -} - -static const struct file_operations fram_fops = { - .owner = THIS_MODULE, - .mmap = fram_mmap, -}; - -#define FRAM_MINOR 0 - -static struct miscdevice fram_dev = { - FRAM_MINOR, - "fram", - &fram_fops -}; - -static int __init -fram_init(void) -{ - int ret; - - ret = misc_register(&fram_dev); - if (ret) { - printk(KERN_ERR "fram: can't misc_register on minor=%d\n", - FRAM_MINOR); - return ret; - } - printk(KERN_INFO "FRAM memory driver v" FRAM_VERSION "\n"); - return 0; -} - -static void __exit -fram_cleanup_module(void) -{ - misc_deregister(&fram_dev); -} - -module_init(fram_init); -module_exit(fram_cleanup_module); - -MODULE_LICENSE("GPL"); - -MODULE_ALIAS_MISCDEV(FRAM_MINOR); diff --git a/arch/avr32/boards/mimc200/setup.c b/arch/avr32/boards/mimc200/setup.c index 2b58d61f0af..1cb8e9cc5cf 100644 --- a/arch/avr32/boards/mimc200/setup.c +++ b/arch/avr32/boards/mimc200/setup.c @@ -8,7 +8,7 @@ * published by the Free Software Foundation. */ -extern struct atmel_lcdfb_info mimc200_lcdc_data; +extern struct atmel_lcdfb_pdata mimc200_lcdc_data; #include <linux/clk.h> #include <linux/etherdevice.h> @@ -43,16 +43,16 @@ unsigned long at32_board_osc_rates[3] = { /* Initialized by bootloader-specific startup code. */ struct tag *bootloader_tags __initdata; -static struct fb_videomode __initdata tx14d14_modes[] = { +static struct fb_videomode __initdata pt0434827_modes[] = { { - .name = "640x480 @ 60", - .refresh = 60, - .xres = 640, .yres = 480, - .pixclock = KHZ2PICOS(11666), + .name = "480x272 @ 72", + .refresh = 72, + .xres = 480, .yres = 272, + .pixclock = KHZ2PICOS(10000), - .left_margin = 80, .right_margin = 1, - .upper_margin = 13, .lower_margin = 2, - .hsync_len = 64, .vsync_len = 1, + .left_margin = 1, .right_margin = 1, + .upper_margin = 12, .lower_margin = 1, + .hsync_len = 42, .vsync_len = 1, .sync = 0, .vmode = FB_VMODE_NONINTERLACED, @@ -60,18 +60,18 @@ static struct fb_videomode __initdata tx14d14_modes[] = { }; static struct fb_monspecs __initdata mimc200_default_monspecs = { - .manufacturer = "HIT", - .monitor = "TX14D14VM1BAB", - .modedb = tx14d14_modes, - .modedb_len = ARRAY_SIZE(tx14d14_modes), + .manufacturer = "PT", + .monitor = "PT0434827-A401", + .modedb = pt0434827_modes, + .modedb_len = ARRAY_SIZE(pt0434827_modes), .hfmin = 14820, .hfmax = 22230, .vfmin = 60, - .vfmax = 73.3, + .vfmax = 85, .dclkmax = 25200000, }; -struct atmel_lcdfb_info __initdata mimc200_lcdc_data = { +struct atmel_lcdfb_pdata __initdata mimc200_lcdc_data = { .default_bpp = 16, .default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN, .default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT @@ -86,7 +86,7 @@ struct eth_addr { u8 addr[6]; }; static struct eth_addr __initdata hw_addr[2]; -static struct eth_platform_data __initdata eth_data[2]; +static struct macb_platform_data __initdata eth_data[2]; static struct spi_eeprom eeprom_25lc010 = { .name = "25lc010", @@ -162,7 +162,7 @@ static void __init set_hw_addr(struct platform_device *pdev) */ regs = (void __iomem __force *)res->start; pclk = clk_get(&pdev->dev, "pclk"); - if (!pclk) + if (IS_ERR(pclk)) return; clk_enable(pclk); @@ -175,10 +175,10 @@ static void __init set_hw_addr(struct platform_device *pdev) void __init setup_board(void) { - at32_map_usart(0, 0); /* USART 0: /dev/ttyS0 (TTL --> Altera) */ - at32_map_usart(1, 1); /* USART 1: /dev/ttyS1 (RS232) */ - at32_map_usart(2, 2); /* USART 2: /dev/ttyS2 (RS485) */ - at32_map_usart(3, 3); /* USART 3: /dev/ttyS3 (RS422 Multidrop) */ + at32_map_usart(0, 0, 0); /* USART 0: /dev/ttyS0 (TTL --> Altera) */ + at32_map_usart(1, 1, 0); /* USART 1: /dev/ttyS1 (RS232) */ + at32_map_usart(2, 2, 0); /* USART 2: /dev/ttyS2 (RS485) */ + at32_map_usart(3, 3, 0); /* USART 3: /dev/ttyS3 (RS422 Multidrop) */ } static struct i2c_gpio_platform_data i2c_gpio_data = { @@ -228,7 +228,8 @@ static int __init mimc200_init(void) i2c_register_board_info(0, i2c_info, ARRAY_SIZE(i2c_info)); at32_add_device_lcdc(0, &mimc200_lcdc_data, - fbmem_start, fbmem_size, 1); + fbmem_start, fbmem_size, + ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_CONTROL | ATMEL_LCDC_ALT_24B_DATA); return 0; } |