diff options
Diffstat (limited to 'arch/avr32/boards/hammerhead')
| -rw-r--r-- | arch/avr32/boards/hammerhead/Kconfig | 2 | ||||
| -rw-r--r-- | arch/avr32/boards/hammerhead/flash.c | 5 | ||||
| -rw-r--r-- | arch/avr32/boards/hammerhead/setup.c | 12 |
3 files changed, 10 insertions, 9 deletions
diff --git a/arch/avr32/boards/hammerhead/Kconfig b/arch/avr32/boards/hammerhead/Kconfig index fda2331f978..5c13d785cc7 100644 --- a/arch/avr32/boards/hammerhead/Kconfig +++ b/arch/avr32/boards/hammerhead/Kconfig @@ -24,7 +24,7 @@ config BOARD_HAMMERHEAD_SND bool "Atmel AC97 Sound support" help This enables Sound support for the Hammerhead board. You may - also go trough the ALSA settings to get it working. + also go through the ALSA settings to get it working. Choose 'Y' here if you have ordered a Corona daugther board and want to make your board funky. diff --git a/arch/avr32/boards/hammerhead/flash.c b/arch/avr32/boards/hammerhead/flash.c index a98c6dd3a02..776c3cb9b6e 100644 --- a/arch/avr32/boards/hammerhead/flash.c +++ b/arch/avr32/boards/hammerhead/flash.c @@ -15,7 +15,6 @@ #include <linux/mtd/physmap.h> #include <linux/usb/isp116x.h> #include <linux/dma-mapping.h> -#include <linux/platform_device.h> #include <linux/delay.h> #include <mach/portmux.h> @@ -281,13 +280,13 @@ static struct resource hh_fpga0_resource[] = { }, }; -static u64 hh_fpga0_dma_mask = DMA_32BIT_MASK; +static u64 hh_fpga0_dma_mask = DMA_BIT_MASK(32); static struct platform_device hh_fpga0_device = { .name = "hh_fpga", .id = 0, .dev = { .dma_mask = &hh_fpga0_dma_mask, - .coherent_dma_mask = DMA_32BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .resource = hh_fpga0_resource, .num_resources = ARRAY_SIZE(hh_fpga0_resource), diff --git a/arch/avr32/boards/hammerhead/setup.c b/arch/avr32/boards/hammerhead/setup.c index 4d2fe82b202..dc0e317f2ec 100644 --- a/arch/avr32/boards/hammerhead/setup.c +++ b/arch/avr32/boards/hammerhead/setup.c @@ -29,6 +29,8 @@ #include <mach/init.h> #include <mach/portmux.h> +#include <sound/atmel-ac97c.h> + #include "../../mach-at32ap/clock.h" #include "flash.h" @@ -75,7 +77,7 @@ static struct fb_monspecs __initdata hammerhead_hda350t_monspecs = { .dclkmax = 10000000, }; -struct atmel_lcdfb_info __initdata hammerhead_lcdc_data = { +struct atmel_lcdfb_pdata __initdata hammerhead_lcdc_data = { .default_bpp = 24, .default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN, .default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT @@ -100,7 +102,7 @@ struct eth_addr { }; static struct eth_addr __initdata hw_addr[1]; -static struct eth_platform_data __initdata eth_data[1]; +static struct macb_platform_data __initdata eth_data[1]; /* * The next two functions should go away as the boot loader is @@ -148,7 +150,7 @@ static void __init set_hw_addr(struct platform_device *pdev) regs = (void __iomem __force *)res->start; pclk = clk_get(&pdev->dev, "pclk"); - if (!pclk) + if (IS_ERR(pclk)) return; clk_enable(pclk); @@ -163,7 +165,7 @@ static void __init set_hw_addr(struct platform_device *pdev) void __init setup_board(void) { - at32_map_usart(1, 0); /* USART 1: /dev/ttyS0, DB9 */ + at32_map_usart(1, 0, 0); /* USART 1: /dev/ttyS0, DB9 */ at32_setup_serial_console(0); } @@ -233,7 +235,7 @@ static int __init hammerhead_init(void) i2c_register_board_info(0, i2c_info, ARRAY_SIZE(i2c_info)); #ifdef CONFIG_BOARD_HAMMERHEAD_SND - at32_add_device_ac97c(0, &ac97c_data); + at32_add_device_ac97c(0, &ac97c_data, AC97C_BOTH); #endif /* Select the Touchscreen interrupt pin mode */ |