aboutsummaryrefslogtreecommitdiff
path: root/arch/avr32/boards/atstk1000
diff options
context:
space:
mode:
Diffstat (limited to 'arch/avr32/boards/atstk1000')
-rw-r--r--arch/avr32/boards/atstk1000/atstk1000.h2
-rw-r--r--arch/avr32/boards/atstk1000/atstk1002.c40
-rw-r--r--arch/avr32/boards/atstk1000/atstk1003.c26
-rw-r--r--arch/avr32/boards/atstk1000/atstk1004.c8
-rw-r--r--arch/avr32/boards/atstk1000/setup.c2
5 files changed, 21 insertions, 57 deletions
diff --git a/arch/avr32/boards/atstk1000/atstk1000.h b/arch/avr32/boards/atstk1000/atstk1000.h
index 9392d325286..653cc09e536 100644
--- a/arch/avr32/boards/atstk1000/atstk1000.h
+++ b/arch/avr32/boards/atstk1000/atstk1000.h
@@ -10,7 +10,7 @@
#ifndef __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H
#define __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H
-extern struct atmel_lcdfb_info atstk1000_lcdc_data;
+extern struct atmel_lcdfb_pdata atstk1000_lcdc_data;
void atstk1000_setup_j2_leds(void);
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index 5c5cdf3b464..6c80aba7bf9 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -16,12 +16,12 @@
#include <linux/types.h>
#include <linux/spi/spi.h>
#include <linux/spi/at73c213.h>
+#include <linux/atmel-mci.h>
#include <video/atmel_lcdc.h>
#include <asm/io.h>
#include <asm/setup.h>
-#include <asm/atmel-mci.h>
#include <mach/at32ap700x.h>
#include <mach/board.h>
@@ -90,18 +90,14 @@ static struct mtd_partition nand_partitions[] = {
},
};
-static struct mtd_partition *nand_part_info(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(nand_partitions);
- return nand_partitions;
-}
-
static struct atmel_nand_data atstk1006_nand_data __initdata = {
.cle = 21,
.ale = 22,
.rdy_pin = GPIO_PIN_PB(30),
.enable_pin = GPIO_PIN_PB(29),
- .partition_info = nand_part_info,
+ .ecc_mode = NAND_ECC_SOFT,
+ .parts = nand_partitions,
+ .num_parts = ARRAY_SIZE(nand_partitions),
};
#endif
@@ -110,7 +106,7 @@ struct eth_addr {
};
static struct eth_addr __initdata hw_addr[2];
-static struct eth_platform_data __initdata eth_data[2] = {
+static struct macb_platform_data __initdata eth_data[2] = {
{
/*
* The MDIO pullups on STK1000 are a bit too weak for
@@ -203,7 +199,7 @@ static void __init set_hw_addr(struct platform_device *pdev)
*/
regs = (void __iomem __force *)res->start;
pclk = clk_get(&pdev->dev, "pclk");
- if (!pclk)
+ if (IS_ERR(pclk))
return;
clk_enable(pclk);
@@ -252,12 +248,12 @@ static void __init atstk1002_setup_extdac(void)
void __init setup_board(void)
{
#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
- at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
+ at32_map_usart(0, 1, 0); /* USART 0/B: /dev/ttyS1, IRDA */
#else
- at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
+ at32_map_usart(1, 0, 0); /* USART 1/A: /dev/ttyS0, DB9 */
#endif
/* USART 2/unused: expansion connector */
- at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */
+ at32_map_usart(3, 2, 0); /* USART 3/C: /dev/ttyS2, DB9 */
at32_setup_serial_console(0);
}
@@ -287,23 +283,7 @@ static int __init atstk1002_init(void)
* ATSTK1000 uses 32-bit SDRAM interface. Reserve the
* SDRAM-specific pins so that nobody messes with them.
*/
- at32_reserve_pin(GPIO_PIN_PE(0)); /* DATA[16] */
- at32_reserve_pin(GPIO_PIN_PE(1)); /* DATA[17] */
- at32_reserve_pin(GPIO_PIN_PE(2)); /* DATA[18] */
- at32_reserve_pin(GPIO_PIN_PE(3)); /* DATA[19] */
- at32_reserve_pin(GPIO_PIN_PE(4)); /* DATA[20] */
- at32_reserve_pin(GPIO_PIN_PE(5)); /* DATA[21] */
- at32_reserve_pin(GPIO_PIN_PE(6)); /* DATA[22] */
- at32_reserve_pin(GPIO_PIN_PE(7)); /* DATA[23] */
- at32_reserve_pin(GPIO_PIN_PE(8)); /* DATA[24] */
- at32_reserve_pin(GPIO_PIN_PE(9)); /* DATA[25] */
- at32_reserve_pin(GPIO_PIN_PE(10)); /* DATA[26] */
- at32_reserve_pin(GPIO_PIN_PE(11)); /* DATA[27] */
- at32_reserve_pin(GPIO_PIN_PE(12)); /* DATA[28] */
- at32_reserve_pin(GPIO_PIN_PE(13)); /* DATA[29] */
- at32_reserve_pin(GPIO_PIN_PE(14)); /* DATA[30] */
- at32_reserve_pin(GPIO_PIN_PE(15)); /* DATA[31] */
- at32_reserve_pin(GPIO_PIN_PE(26)); /* SDCS */
+ at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL);
#ifdef CONFIG_BOARD_ATSTK1006
smc_set_timing(&nand_config, &nand_timing);
diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c
index 134b566630b..ff7e2329882 100644
--- a/arch/avr32/boards/atstk1000/atstk1003.c
+++ b/arch/avr32/boards/atstk1000/atstk1003.c
@@ -17,9 +17,9 @@
#include <linux/spi/at73c213.h>
#include <linux/spi/spi.h>
+#include <linux/atmel-mci.h>
#include <asm/setup.h>
-#include <asm/atmel-mci.h>
#include <mach/at32ap700x.h>
#include <mach/board.h>
@@ -115,12 +115,12 @@ static void __init atstk1003_setup_extdac(void)
void __init setup_board(void)
{
#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
- at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
+ at32_map_usart(0, 1, 0); /* USART 0/B: /dev/ttyS1, IRDA */
#else
- at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
+ at32_map_usart(1, 0, 0); /* USART 1/A: /dev/ttyS0, DB9 */
#endif
/* USART 2/unused: expansion connector */
- at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */
+ at32_map_usart(3, 2, 0); /* USART 3/C: /dev/ttyS2, DB9 */
at32_setup_serial_console(0);
}
@@ -131,23 +131,7 @@ static int __init atstk1003_init(void)
* ATSTK1000 uses 32-bit SDRAM interface. Reserve the
* SDRAM-specific pins so that nobody messes with them.
*/
- at32_reserve_pin(GPIO_PIN_PE(0)); /* DATA[16] */
- at32_reserve_pin(GPIO_PIN_PE(1)); /* DATA[17] */
- at32_reserve_pin(GPIO_PIN_PE(2)); /* DATA[18] */
- at32_reserve_pin(GPIO_PIN_PE(3)); /* DATA[19] */
- at32_reserve_pin(GPIO_PIN_PE(4)); /* DATA[20] */
- at32_reserve_pin(GPIO_PIN_PE(5)); /* DATA[21] */
- at32_reserve_pin(GPIO_PIN_PE(6)); /* DATA[22] */
- at32_reserve_pin(GPIO_PIN_PE(7)); /* DATA[23] */
- at32_reserve_pin(GPIO_PIN_PE(8)); /* DATA[24] */
- at32_reserve_pin(GPIO_PIN_PE(9)); /* DATA[25] */
- at32_reserve_pin(GPIO_PIN_PE(10)); /* DATA[26] */
- at32_reserve_pin(GPIO_PIN_PE(11)); /* DATA[27] */
- at32_reserve_pin(GPIO_PIN_PE(12)); /* DATA[28] */
- at32_reserve_pin(GPIO_PIN_PE(13)); /* DATA[29] */
- at32_reserve_pin(GPIO_PIN_PE(14)); /* DATA[30] */
- at32_reserve_pin(GPIO_PIN_PE(15)); /* DATA[31] */
- at32_reserve_pin(GPIO_PIN_PE(26)); /* SDCS */
+ at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL);
#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
at32_add_device_usart(1);
diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c
index cb32eb844aa..69a9f0f08c6 100644
--- a/arch/avr32/boards/atstk1000/atstk1004.c
+++ b/arch/avr32/boards/atstk1000/atstk1004.c
@@ -17,11 +17,11 @@
#include <linux/spi/at73c213.h>
#include <linux/spi/spi.h>
+#include <linux/atmel-mci.h>
#include <video/atmel_lcdc.h>
#include <asm/setup.h>
-#include <asm/atmel-mci.h>
#include <mach/at32ap700x.h>
#include <mach/board.h>
@@ -120,12 +120,12 @@ static void __init atstk1004_setup_extdac(void)
void __init setup_board(void)
{
#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
- at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
+ at32_map_usart(0, 1, 0); /* USART 0/B: /dev/ttyS1, IRDA */
#else
- at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
+ at32_map_usart(1, 0, 0); /* USART 1/A: /dev/ttyS0, DB9 */
#endif
/* USART 2/unused: expansion connector */
- at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */
+ at32_map_usart(3, 2, 0); /* USART 3/C: /dev/ttyS2, DB9 */
at32_setup_serial_console(0);
}
diff --git a/arch/avr32/boards/atstk1000/setup.c b/arch/avr32/boards/atstk1000/setup.c
index 2d6b560115d..b6b88f5e0b4 100644
--- a/arch/avr32/boards/atstk1000/setup.c
+++ b/arch/avr32/boards/atstk1000/setup.c
@@ -55,7 +55,7 @@ static struct fb_monspecs __initdata atstk1000_default_monspecs = {
.dclkmax = 30000000,
};
-struct atmel_lcdfb_info __initdata atstk1000_lcdc_data = {
+struct atmel_lcdfb_pdata __initdata atstk1000_lcdc_data = {
.default_bpp = 24,
.default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
.default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-18 22:45:28 +0000