3 files changed, 13 insertions, 17 deletions

diff --git a/arch/avr32/boards/atngw100/evklcd10x.c b/arch/avr32/boards/atngw100/evklcd10x.c
index 20388750d56..64919b0da7a 100644
--- a/arch/avr32/boards/atngw100/evklcd10x.c
+++ b/arch/avr32/boards/atngw100/evklcd10x.c
@@ -58,7 +58,7 @@ static struct fb_monspecs __initdata atevklcd10x_default_monspecs = {
 	.dclkmax		= 28330000,
 };
 
-static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = {
+static struct atmel_lcdfb_pdata __initdata atevklcd10x_lcdc_data = {
 	.default_bpp		= 16,
 	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
 	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
@@ -96,7 +96,7 @@ static struct fb_monspecs __initdata atevklcd10x_default_monspecs = {
 	.dclkmax		= 7000000,
 };
 
-static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = {
+static struct atmel_lcdfb_pdata __initdata atevklcd10x_lcdc_data = {
 	.default_bpp		= 16,
 	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
 	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
@@ -134,7 +134,7 @@ static struct fb_monspecs __initdata atevklcd10x_default_monspecs = {
 	.dclkmax		= 6400000,
 };
 
-static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = {
+static struct atmel_lcdfb_pdata __initdata atevklcd10x_lcdc_data = {
 	.default_bpp		= 16,
 	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
 	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
@@ -145,7 +145,7 @@ static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = {
 };
 #endif
 
-static void atevklcd10x_lcdc_power_control(int on)
+static void atevklcd10x_lcdc_power_control(struct atmel_lcdfb_pdata *pdata, int on)
 {
 	gpio_set_value(GPIO_PIN_PB(15), on);
 }
diff --git a/arch/avr32/boards/atngw100/mrmt.c b/arch/avr32/boards/atngw100/mrmt.c
index 7919be311f4..1ba09e4c02b 100644
--- a/arch/avr32/boards/atngw100/mrmt.c
+++ b/arch/avr32/boards/atngw100/mrmt.c
@@ -83,7 +83,7 @@ static struct fb_monspecs __initdata lcd_fb_default_monspecs = {
 	.dclkmax		= 9260000,
 };
 
-static struct atmel_lcdfb_info __initdata rmt_lcdc_data = {
+static struct atmel_lcdfb_pdata __initdata rmt_lcdc_data = {
 	.default_bpp		= 24,
 	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
 	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
@@ -126,7 +126,7 @@ static struct fb_monspecs __initdata lcd_fb_default_monspecs = {
 	.dclkmax		= 9260000,
 };
 
-static struct atmel_lcdfb_info __initdata rmt_lcdc_data = {
+static struct atmel_lcdfb_pdata __initdata rmt_lcdc_data = {
 	.default_bpp		= 24,
 	.default_dmacon		= ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
 	.default_lcdcon2	= (ATMEL_LCDC_DISTYPE_TFT
@@ -150,7 +150,6 @@ static struct ac97c_platform_data __initdata ac97c0_data = {
 static struct platform_device rmt_ts_device = {
 	.name	= "ucb1400_ts",
 	.id	= -1,
-	}
 };
 #endif
 
@@ -301,7 +300,7 @@ static int __init mrmt1_init(void)
 	/* Select the Touchscreen interrupt pin mode */
 	at32_select_periph( GPIO_PIOB_BASE, 1 << (PB_EXTINT_BASE+TS_IRQ),
 			GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
-	set_irq_type( AT32_EXTINT(TS_IRQ), IRQ_TYPE_EDGE_FALLING );
+	irq_set_irq_type(AT32_EXTINT(TS_IRQ), IRQ_TYPE_EDGE_FALLING);
 	at32_spi_setup_slaves(0,spi01_board_info,ARRAY_SIZE(spi01_board_info));
 	spi_register_board_info(spi01_board_info,ARRAY_SIZE(spi01_board_info));
 #endif
diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index 8c6a2440e34..afeae8978a8 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -90,11 +90,6 @@ static struct mtd_partition nand_partitions[] = {
 	},
 };
 
-static struct mtd_partition *nand_part_info(int size, int *num_partitions)
-{
-	*num_partitions = ARRAY_SIZE(nand_partitions);
-	return nand_partitions;
-}
 
 static struct atmel_nand_data atngw100mkii_nand_data __initdata = {
 	.cle		= 21,
@@ -102,7 +97,9 @@ static struct atmel_nand_data atngw100mkii_nand_data __initdata = {
 	.rdy_pin	= GPIO_PIN_PB(28),
 	.enable_pin	= GPIO_PIN_PE(23),
 	.bus_width_16	= true,
-	.partition_info	= nand_part_info,
+	.ecc_mode	= NAND_ECC_SOFT,
+	.parts		= nand_partitions,
+	.num_parts	= ARRAY_SIZE(nand_partitions),
 };
 #endif
 
@@ -113,7 +110,7 @@ struct eth_addr {
 	u8 addr[6];
 };
 static struct eth_addr __initdata hw_addr[2];
-static struct eth_platform_data __initdata eth_data[2];
+static struct macb_platform_data __initdata eth_data[2];
 
 static struct spi_board_info spi0_board_info[] __initdata = {
 	{
@@ -188,7 +185,7 @@ static void __init set_hw_addr(struct platform_device *pdev)
 	 */
 	regs = (void __iomem __force *)res->start;
 	pclk = clk_get(&pdev->dev, "pclk");
-	if (!pclk)
+	if (IS_ERR(pclk))
 		return;
 
 	clk_enable(pclk);
@@ -322,6 +319,6 @@ static int __init atngw100_arch_init(void)
 	/* set_irq_type() after the arch_initcall for EIC has run, and
 	 * before the I2C subsystem could try using this IRQ.
 	 */
-	return set_irq_type(AT32_EXTINT(3), IRQ_TYPE_EDGE_FALLING);
+	return irq_set_irq_type(AT32_EXTINT(3), IRQ_TYPE_EDGE_FALLING);
 }
 arch_initcall(atngw100_arch_init);