diff options
Diffstat (limited to 'arch/arm/plat-samsung/include/plat/gpio-cfg.h')
| -rw-r--r-- | arch/arm/plat-samsung/include/plat/gpio-cfg.h | 58 |
1 files changed, 38 insertions, 20 deletions
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h index e4b5cf126fa..08740eed050 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h @@ -24,14 +24,16 @@ #ifndef __PLAT_GPIO_CFG_H #define __PLAT_GPIO_CFG_H __FILE__ -typedef unsigned int __bitwise__ s3c_gpio_pull_t; +#include <linux/types.h> + +typedef unsigned int __bitwise__ samsung_gpio_pull_t; typedef unsigned int __bitwise__ s5p_gpio_drvstr_t; /* forward declaration if gpio-core.h hasn't been included */ -struct s3c_gpio_chip; +struct samsung_gpio_chip; /** - * struct s3c_gpio_cfg GPIO configuration + * struct samsung_gpio_cfg GPIO configuration * @cfg_eint: Configuration setting when used for external interrupt source * @get_pull: Read the current pull configuration for the GPIO * @set_pull: Set the current pull configuraiton for the GPIO @@ -44,20 +46,20 @@ struct s3c_gpio_chip; * per-bank configuration information that other systems such as the * external interrupt code will need. * - * @sa s3c_gpio_cfgpin + * @sa samsung_gpio_cfgpin * @sa s3c_gpio_getcfg * @sa s3c_gpio_setpull * @sa s3c_gpio_getpull */ -struct s3c_gpio_cfg { +struct samsung_gpio_cfg { unsigned int cfg_eint; - s3c_gpio_pull_t (*get_pull)(struct s3c_gpio_chip *chip, unsigned offs); - int (*set_pull)(struct s3c_gpio_chip *chip, unsigned offs, - s3c_gpio_pull_t pull); + samsung_gpio_pull_t (*get_pull)(struct samsung_gpio_chip *chip, unsigned offs); + int (*set_pull)(struct samsung_gpio_chip *chip, unsigned offs, + samsung_gpio_pull_t pull); - unsigned (*get_config)(struct s3c_gpio_chip *chip, unsigned offs); - int (*set_config)(struct s3c_gpio_chip *chip, unsigned offs, + unsigned (*get_config)(struct samsung_gpio_chip *chip, unsigned offs); + int (*set_config)(struct samsung_gpio_chip *chip, unsigned offs, unsigned config); }; @@ -69,7 +71,7 @@ struct s3c_gpio_cfg { #define S3C_GPIO_OUTPUT (S3C_GPIO_SPECIAL(1)) #define S3C_GPIO_SFN(x) (S3C_GPIO_SPECIAL(x)) -#define s3c_gpio_is_cfg_special(_cfg) \ +#define samsung_gpio_is_cfg_special(_cfg) \ (((_cfg) & S3C_GPIO_SPECIAL_MARK) == S3C_GPIO_SPECIAL_MARK) /** @@ -125,12 +127,12 @@ extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr, * * These values control the state of the weak pull-{up,down} resistors * available on most pins on the S3C series. Not all chips support both - * up or down settings, and it may be dependant on the chip that is being + * up or down settings, and it may be dependent on the chip that is being * used to whether the particular mode is available. */ -#define S3C_GPIO_PULL_NONE ((__force s3c_gpio_pull_t)0x00) -#define S3C_GPIO_PULL_DOWN ((__force s3c_gpio_pull_t)0x01) -#define S3C_GPIO_PULL_UP ((__force s3c_gpio_pull_t)0x02) +#define S3C_GPIO_PULL_NONE ((__force samsung_gpio_pull_t)0x00) +#define S3C_GPIO_PULL_DOWN ((__force samsung_gpio_pull_t)0x01) +#define S3C_GPIO_PULL_UP ((__force samsung_gpio_pull_t)0x02) /** * s3c_gpio_setpull() - set the state of a gpio pin pull resistor @@ -138,12 +140,12 @@ extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr, * @pull: The configuration for the pull resistor. * * This function sets the state of the pull-{up,down} resistor for the - * specified pin. It will return 0 if successfull, or a negative error + * specified pin. It will return 0 if successful, or a negative error * code if the pin cannot support the requested pull setting. * * @pull is one of S3C_GPIO_PULL_NONE, S3C_GPIO_PULL_DOWN or S3C_GPIO_PULL_UP. */ -extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull); +extern int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull); /** * s3c_gpio_getpull() - get the pull resistor state of a gpio pin @@ -151,7 +153,7 @@ extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull); * * Read the pull resistor value for the specified pin. */ -extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin); +extern samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin); /* configure `all` aspects of an gpio */ @@ -170,7 +172,7 @@ extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin); * @sa s3c_gpio_cfgpin_range */ extern int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr, - unsigned int cfg, s3c_gpio_pull_t pull); + unsigned int cfg, samsung_gpio_pull_t pull); static inline int s3c_gpio_cfgrange_nopull(unsigned int pin, unsigned int size, unsigned int cfg) @@ -202,7 +204,7 @@ extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin); * @drvstr: The new value of the driver strength * * This function sets the driver strength value for the specified pin. - * It will return 0 if successfull, or a negative error code if the pin + * It will return 0 if successful, or a negative error code if the pin * cannot support the requested setting. */ extern int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr); @@ -225,4 +227,20 @@ extern int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr); */ extern int s5p_register_gpio_interrupt(int pin); +/** s5p_register_gpioint_bank() - add gpio bank for further gpio interrupt + * registration (see s5p_register_gpio_interrupt function) + * @chain_irq: chained irq number for the gpio int handler for this bank + * @start: start gpio group number of this bank + * @nr_groups: number of gpio groups handled by this bank + * + * This functions registers initial information about gpio banks that + * can be later used by the s5p_register_gpio_interrupt() function to + * enable support for gpio interrupt for particular gpio group. + */ +#ifdef CONFIG_S5P_GPIO_INT +extern int s5p_register_gpioint_bank(int chain_irq, int start, int nr_groups); +#else +#define s5p_register_gpioint_bank(chain_irq, start, nr_groups) do { } while (0) +#endif + #endif /* __PLAT_GPIO_CFG_H */ |