diff options
Diffstat (limited to 'arch/arm/plat-s5p')
38 files changed, 0 insertions, 3409 deletions
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig deleted file mode 100644 index 84922971658..00000000000 --- a/arch/arm/plat-s5p/Kconfig +++ /dev/null @@ -1,91 +0,0 @@ -# arch/arm/plat-s5p/Kconfig -# -# Copyright (c) 2009 Samsung Electronics Co., Ltd. -# http://www.samsung.com/ -# -# Licensed under GPLv2 - -config PLAT_S5P - bool - depends on (ARCH_S5P64X0 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS4) - default y - select ARM_VIC if !ARCH_EXYNOS4 - select ARM_GIC if ARCH_EXYNOS4 - select NO_IOPORT - select ARCH_REQUIRE_GPIOLIB - select S3C_GPIO_TRACK - select S5P_GPIO_DRVSTR - select SAMSUNG_GPIOLIB_4BIT - select S3C_GPIO_CFG_S3C64XX - select S3C_GPIO_PULL_UPDOWN - select S3C_GPIO_CFG_S3C24XX - select PLAT_SAMSUNG - select SAMSUNG_CLKSRC - select SAMSUNG_IRQ_VIC_TIMER - select SAMSUNG_IRQ_UART - help - Base platform code for Samsung's S5P series SoC. - -config S5P_EXT_INT - bool - help - Use the external interrupts (other than GPIO interrupts.) - Note: Do not choose this for S5P6440 and S5P6450. - -config S5P_GPIO_INT - bool - help - Common code for the GPIO interrupts (other than external interrupts.) - -config S5P_HRT - bool - help - Use the High Resolution timer support - -comment "System MMU" - -config S5P_SYSTEM_MMU - bool "S5P SYSTEM MMU" - depends on ARCH_EXYNOS4 - help - Say Y here if you want to enable System MMU - -config S5P_DEV_FIMC0 - bool - help - Compile in platform device definitions for FIMC controller 0 - -config S5P_DEV_FIMC1 - bool - help - Compile in platform device definitions for FIMC controller 1 - -config S5P_DEV_FIMC2 - bool - help - Compile in platform device definitions for FIMC controller 2 - -config S5P_DEV_FIMC3 - bool - help - Compile in platform device definitions for FIMC controller 3 - -config S5P_DEV_ONENAND - bool - help - Compile in platform device definition for OneNAND controller - -config S5P_DEV_CSIS0 - bool - help - Compile in platform device definitions for MIPI-CSIS channel 0 - -config S5P_DEV_CSIS1 - bool - help - Compile in platform device definitions for MIPI-CSIS channel 1 - -config S5P_SETUP_MIPIPHY - bool - help - Compile in common setup code for MIPI-CSIS and MIPI-DSIM devices diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile deleted file mode 100644 index 42afff7f60b..00000000000 --- a/arch/arm/plat-s5p/Makefile +++ /dev/null @@ -1,36 +0,0 @@ -# arch/arm/plat-s5p/Makefile -# -# Copyright (c) 2009 Samsung Electronics Co., Ltd. -# http://www.samsung.com/ -# -# Licensed under GPLv2 - -obj-y := -obj-m := -obj-n := dummy.o -obj- := - -# Core files - -obj-y += dev-pmu.o -obj-y += dev-uart.o -obj-y += cpu.o -obj-y += clock.o -obj-y += irq.o -obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o -obj-$(CONFIG_S5P_GPIO_INT) += irq-gpioint.o -obj-$(CONFIG_S5P_SYSTEM_MMU) += sysmmu.o -obj-$(CONFIG_PM) += pm.o -obj-$(CONFIG_PM) += irq-pm.o -obj-$(CONFIG_S5P_HRT) += s5p-time.o - -# devices - -obj-$(CONFIG_S5P_DEV_FIMC0) += dev-fimc0.o -obj-$(CONFIG_S5P_DEV_FIMC1) += dev-fimc1.o -obj-$(CONFIG_S5P_DEV_FIMC2) += dev-fimc2.o -obj-$(CONFIG_S5P_DEV_FIMC3) += dev-fimc3.o -obj-$(CONFIG_S5P_DEV_ONENAND) += dev-onenand.o -obj-$(CONFIG_S5P_DEV_CSIS0) += dev-csis0.o -obj-$(CONFIG_S5P_DEV_CSIS1) += dev-csis1.o -obj-$(CONFIG_S5P_SETUP_MIPIPHY) += setup-mipiphy.o diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c deleted file mode 100644 index 8d081d968c5..00000000000 --- a/arch/arm/plat-s5p/clock.c +++ /dev/null @@ -1,193 +0,0 @@ -/* linux/arch/arm/plat-s5p/clock.c - * - * Copyright 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P - Common clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/sysdev.h> -#include <linux/io.h> -#include <asm/div64.h> - -#include <mach/regs-clock.h> - -#include <plat/clock.h> -#include <plat/clock-clksrc.h> -#include <plat/s5p-clock.h> - -/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call - * clk_ext_xtal_mux. -*/ -struct clk clk_ext_xtal_mux = { - .name = "ext_xtal", - .id = -1, -}; - -struct clk clk_xusbxti = { - .name = "xusbxti", - .id = -1, -}; - -struct clk s5p_clk_27m = { - .name = "clk_27m", - .id = -1, - .rate = 27000000, -}; - -/* 48MHz USB Phy clock output */ -struct clk clk_48m = { - .name = "clk_48m", - .id = -1, - .rate = 48000000, -}; - -/* APLL clock output - * No need .ctrlbit, this is always on -*/ -struct clk clk_fout_apll = { - .name = "fout_apll", - .id = -1, -}; - -/* MPLL clock output - * No need .ctrlbit, this is always on -*/ -struct clk clk_fout_mpll = { - .name = "fout_mpll", - .id = -1, -}; - -/* EPLL clock output */ -struct clk clk_fout_epll = { - .name = "fout_epll", - .id = -1, - .ctrlbit = (1 << 31), -}; - -/* DPLL clock output */ -struct clk clk_fout_dpll = { - .name = "fout_dpll", - .id = -1, - .ctrlbit = (1 << 31), -}; - -/* VPLL clock output */ -struct clk clk_fout_vpll = { - .name = "fout_vpll", - .id = -1, - .ctrlbit = (1 << 31), -}; - -/* Possible clock sources for APLL Mux */ -static struct clk *clk_src_apll_list[] = { - [0] = &clk_fin_apll, - [1] = &clk_fout_apll, -}; - -struct clksrc_sources clk_src_apll = { - .sources = clk_src_apll_list, - .nr_sources = ARRAY_SIZE(clk_src_apll_list), -}; - -/* Possible clock sources for MPLL Mux */ -static struct clk *clk_src_mpll_list[] = { - [0] = &clk_fin_mpll, - [1] = &clk_fout_mpll, -}; - -struct clksrc_sources clk_src_mpll = { - .sources = clk_src_mpll_list, - .nr_sources = ARRAY_SIZE(clk_src_mpll_list), -}; - -/* Possible clock sources for EPLL Mux */ -static struct clk *clk_src_epll_list[] = { - [0] = &clk_fin_epll, - [1] = &clk_fout_epll, -}; - -struct clksrc_sources clk_src_epll = { - .sources = clk_src_epll_list, - .nr_sources = ARRAY_SIZE(clk_src_epll_list), -}; - -/* Possible clock sources for DPLL Mux */ -static struct clk *clk_src_dpll_list[] = { - [0] = &clk_fin_dpll, - [1] = &clk_fout_dpll, -}; - -struct clksrc_sources clk_src_dpll = { - .sources = clk_src_dpll_list, - .nr_sources = ARRAY_SIZE(clk_src_dpll_list), -}; - -struct clk clk_vpll = { - .name = "vpll", - .id = -1, -}; - -int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable) -{ - unsigned int ctrlbit = clk->ctrlbit; - u32 con; - - con = __raw_readl(reg); - con = enable ? (con | ctrlbit) : (con & ~ctrlbit); - __raw_writel(con, reg); - return 0; -} - -int s5p_epll_enable(struct clk *clk, int enable) -{ - unsigned int ctrlbit = clk->ctrlbit; - unsigned int epll_con = __raw_readl(S5P_EPLL_CON) & ~ctrlbit; - - if (enable) - __raw_writel(epll_con | ctrlbit, S5P_EPLL_CON); - else - __raw_writel(epll_con, S5P_EPLL_CON); - - return 0; -} - -unsigned long s5p_epll_get_rate(struct clk *clk) -{ - return clk->rate; -} - -static struct clk *s5p_clks[] __initdata = { - &clk_ext_xtal_mux, - &clk_48m, - &s5p_clk_27m, - &clk_fout_apll, - &clk_fout_mpll, - &clk_fout_epll, - &clk_fout_dpll, - &clk_fout_vpll, - &clk_vpll, - &clk_xusbxti, -}; - -void __init s5p_register_clocks(unsigned long xtal_freq) -{ - int ret; - - clk_ext_xtal_mux.rate = xtal_freq; - - ret = s3c24xx_register_clocks(s5p_clks, ARRAY_SIZE(s5p_clks)); - if (ret > 0) - printk(KERN_ERR "Failed to register s5p clocks\n"); -} diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c deleted file mode 100644 index c3bfe9b13ac..00000000000 --- a/arch/arm/plat-s5p/cpu.c +++ /dev/null @@ -1,136 +0,0 @@ -/* linux/arch/arm/plat-s5p/cpu.c - * - * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P CPU Support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <mach/map.h> -#include <mach/regs-clock.h> - -#include <plat/cpu.h> -#include <plat/s5p6440.h> -#include <plat/s5p6442.h> -#include <plat/s5p6450.h> -#include <plat/s5pc100.h> -#include <plat/s5pv210.h> -#include <plat/exynos4.h> - -/* table of supported CPUs */ - -static const char name_s5p6440[] = "S5P6440"; -static const char name_s5p6442[] = "S5P6442"; -static const char name_s5p6450[] = "S5P6450"; -static const char name_s5pc100[] = "S5PC100"; -static const char name_s5pv210[] = "S5PV210/S5PC110"; -static const char name_exynos4210[] = "EXYNOS4210"; - -static struct cpu_table cpu_ids[] __initdata = { - { - .idcode = 0x56440100, - .idmask = 0xffffff00, - .map_io = s5p6440_map_io, - .init_clocks = s5p6440_init_clocks, - .init_uarts = s5p6440_init_uarts, - .init = s5p64x0_init, - .name = name_s5p6440, - }, { - .idcode = 0x36442000, - .idmask = 0xffffff00, - .map_io = s5p6442_map_io, - .init_clocks = s5p6442_init_clocks, - .init_uarts = s5p6442_init_uarts, - .init = s5p6442_init, - .name = name_s5p6442, - }, { - .idcode = 0x36450000, - .idmask = 0xffffff00, - .map_io = s5p6450_map_io, - .init_clocks = s5p6450_init_clocks, - .init_uarts = s5p6450_init_uarts, - .init = s5p64x0_init, - .name = name_s5p6450, - }, { - .idcode = 0x43100000, - .idmask = 0xfffff000, - .map_io = s5pc100_map_io, - .init_clocks = s5pc100_init_clocks, - .init_uarts = s5pc100_init_uarts, - .init = s5pc100_init, - .name = name_s5pc100, - }, { - .idcode = 0x43110000, - .idmask = 0xfffff000, - .map_io = s5pv210_map_io, - .init_clocks = s5pv210_init_clocks, - .init_uarts = s5pv210_init_uarts, - .init = s5pv210_init, - .name = name_s5pv210, - }, { - .idcode = 0x43210000, - .idmask = 0xfffff000, - .map_io = exynos4_map_io, - .init_clocks = exynos4_init_clocks, - .init_uarts = exynos4_init_uarts, - .init = exynos4_init, - .name = name_exynos4210, - }, -}; - -/* minimal IO mapping */ - -static struct map_desc s5p_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_CHIPID, - .pfn = __phys_to_pfn(S5P_PA_CHIPID), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_SYS, - .pfn = __phys_to_pfn(S5P_PA_SYSCON), - .length = SZ_64K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_TIMER, - .pfn = __phys_to_pfn(S5P_PA_TIMER), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_WATCHDOG, - .pfn = __phys_to_pfn(S3C_PA_WDT), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_SROMC, - .pfn = __phys_to_pfn(S5P_PA_SROMC), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -/* read cpu identification code */ - -void __init s5p_init_io(struct map_desc *mach_desc, - int size, void __iomem *cpuid_addr) -{ - unsigned long idcode; - - /* initialize the io descriptors we need for initialization */ - iotable_init(s5p_iodesc, ARRAY_SIZE(s5p_iodesc)); - if (mach_desc) - iotable_init(mach_desc, size); - - idcode = __raw_readl(cpuid_addr); - s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids)); -} diff --git a/arch/arm/plat-s5p/dev-csis0.c b/arch/arm/plat-s5p/dev-csis0.c deleted file mode 100644 index e3aabef5e34..00000000000 --- a/arch/arm/plat-s5p/dev-csis0.c +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd. - * - * S5P series device definition for MIPI-CSIS channel 0 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <mach/map.h> - -static struct resource s5p_mipi_csis0_resource[] = { - [0] = { - .start = S5P_PA_MIPI_CSIS0, - .end = S5P_PA_MIPI_CSIS0 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_MIPI_CSIS0, - .end = IRQ_MIPI_CSIS0, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device s5p_device_mipi_csis0 = { - .name = "s5p-mipi-csis", - .id = 0, - .num_resources = ARRAY_SIZE(s5p_mipi_csis0_resource), - .resource = s5p_mipi_csis0_resource, -}; diff --git a/arch/arm/plat-s5p/dev-csis1.c b/arch/arm/plat-s5p/dev-csis1.c deleted file mode 100644 index 08b91b58020..00000000000 --- a/arch/arm/plat-s5p/dev-csis1.c +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd. - * - * S5P series device definition for MIPI-CSIS channel 1 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <mach/map.h> - -static struct resource s5p_mipi_csis1_resource[] = { - [0] = { - .start = S5P_PA_MIPI_CSIS1, - .end = S5P_PA_MIPI_CSIS1 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_MIPI_CSIS1, - .end = IRQ_MIPI_CSIS1, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device s5p_device_mipi_csis1 = { - .name = "s5p-mipi-csis", - .id = 1, - .num_resources = ARRAY_SIZE(s5p_mipi_csis1_resource), - .resource = s5p_mipi_csis1_resource, -}; diff --git a/arch/arm/plat-s5p/dev-fimc0.c b/arch/arm/plat-s5p/dev-fimc0.c deleted file mode 100644 index 608770fc153..00000000000 --- a/arch/arm/plat-s5p/dev-fimc0.c +++ /dev/null @@ -1,43 +0,0 @@ -/* linux/arch/arm/plat-s5p/dev-fimc0.c - * - * Copyright (c) 2010 Samsung Electronics - * - * Base S5P FIMC0 resource and device definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <mach/map.h> - -static struct resource s5p_fimc0_resource[] = { - [0] = { - .start = S5P_PA_FIMC0, - .end = S5P_PA_FIMC0 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_FIMC0, - .end = IRQ_FIMC0, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 s5p_fimc0_dma_mask = DMA_BIT_MASK(32); - -struct platform_device s5p_device_fimc0 = { - .name = "s5p-fimc", - .id = 0, - .num_resources = ARRAY_SIZE(s5p_fimc0_resource), - .resource = s5p_fimc0_resource, - .dev = { - .dma_mask = &s5p_fimc0_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; diff --git a/arch/arm/plat-s5p/dev-fimc1.c b/arch/arm/plat-s5p/dev-fimc1.c deleted file mode 100644 index 76e3a97a87d..00000000000 --- a/arch/arm/plat-s5p/dev-fimc1.c +++ /dev/null @@ -1,43 +0,0 @@ -/* linux/arch/arm/plat-s5p/dev-fimc1.c - * - * Copyright (c) 2010 Samsung Electronics - * - * Base S5P FIMC1 resource and device definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <mach/map.h> - -static struct resource s5p_fimc1_resource[] = { - [0] = { - .start = S5P_PA_FIMC1, - .end = S5P_PA_FIMC1 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_FIMC1, - .end = IRQ_FIMC1, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 s5p_fimc1_dma_mask = DMA_BIT_MASK(32); - -struct platform_device s5p_device_fimc1 = { - .name = "s5p-fimc", - .id = 1, - .num_resources = ARRAY_SIZE(s5p_fimc1_resource), - .resource = s5p_fimc1_resource, - .dev = { - .dma_mask = &s5p_fimc1_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; diff --git a/arch/arm/plat-s5p/dev-fimc2.c b/arch/arm/plat-s5p/dev-fimc2.c deleted file mode 100644 index 24d29816fa2..00000000000 --- a/arch/arm/plat-s5p/dev-fimc2.c +++ /dev/null @@ -1,43 +0,0 @@ -/* linux/arch/arm/plat-s5p/dev-fimc2.c - * - * Copyright (c) 2010 Samsung Electronics - * - * Base S5P FIMC2 resource and device definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <mach/map.h> - -static struct resource s5p_fimc2_resource[] = { - [0] = { - .start = S5P_PA_FIMC2, - .end = S5P_PA_FIMC2 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_FIMC2, - .end = IRQ_FIMC2, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 s5p_fimc2_dma_mask = DMA_BIT_MASK(32); - -struct platform_device s5p_device_fimc2 = { - .name = "s5p-fimc", - .id = 2, - .num_resources = ARRAY_SIZE(s5p_fimc2_resource), - .resource = s5p_fimc2_resource, - .dev = { - .dma_mask = &s5p_fimc2_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; diff --git a/arch/arm/plat-s5p/dev-fimc3.c b/arch/arm/plat-s5p/dev-fimc3.c deleted file mode 100644 index ef31beca386..00000000000 --- a/arch/arm/plat-s5p/dev-fimc3.c +++ /dev/null @@ -1,43 +0,0 @@ -/* linux/arch/arm/plat-s5p/dev-fimc3.c - * - * Copyright (c) 2010 Samsung Electronics - * - * Base S5P FIMC3 resource and device definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <mach/map.h> - -static struct resource s5p_fimc3_resource[] = { - [0] = { - .start = S5P_PA_FIMC3, - .end = S5P_PA_FIMC3 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_FIMC3, - .end = IRQ_FIMC3, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 s5p_fimc3_dma_mask = DMA_BIT_MASK(32); - -struct platform_device s5p_device_fimc3 = { - .name = "s5p-fimc", - .id = 3, - .num_resources = ARRAY_SIZE(s5p_fimc3_resource), - .resource = s5p_fimc3_resource, - .dev = { - .dma_mask = &s5p_fimc3_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; diff --git a/arch/arm/plat-s5p/dev-onenand.c b/arch/arm/plat-s5p/dev-onenand.c deleted file mode 100644 index 6db926202ca..00000000000 --- a/arch/arm/plat-s5p/dev-onenand.c +++ /dev/null @@ -1,57 +0,0 @@ -/* linux/arch/arm/plat-s5p/dev-onenand.c - * - * Copyright 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright (c) 2008-2010 Samsung Electronics - * Kyungmin Park <kyungmin.park@samsung.com> - * - * S5P series device definition for OneNAND devices - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/onenand.h> - -#include <mach/irqs.h> -#include <mach/map.h> - -static struct resource s5p_onenand_resources[] = { - [0] = { - .start = S5P_PA_ONENAND, - .end = S5P_PA_ONENAND + SZ_128K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = S5P_PA_ONENAND_DMA, - .end = S5P_PA_ONENAND_DMA + SZ_8K - 1, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = IRQ_ONENAND_AUDI, - .end = IRQ_ONENAND_AUDI, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device s5p_device_onenand = { - .name = "s5pc110-onenand", - .id = -1, - .num_resources = ARRAY_SIZE(s5p_onenand_resources), - .resource = s5p_onenand_resources, -}; - -void s5p_onenand_set_platdata(struct onenand_platform_data *pdata) -{ - struct onenand_platform_data *pd; - - pd = kmemdup(pdata, sizeof(struct onenand_platform_data), GFP_KERNEL); - if (!pd) - printk(KERN_ERR "%s: no memory for platform data\n", __func__); - s5p_device_onenand.dev.platform_data = pd; -} diff --git a/arch/arm/plat-s5p/dev-pmu.c b/arch/arm/plat-s5p/dev-pmu.c deleted file mode 100644 index a08576da72b..00000000000 --- a/arch/arm/plat-s5p/dev-pmu.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * linux/arch/arm/plat-s5p/dev-pmu.c - * - * Copyright (C) 2010 Samsung Electronics Co.Ltd - * Author: Joonyoung Shim <jy0922.shim@samsung.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/platform_device.h> -#include <asm/pmu.h> -#include <mach/irqs.h> - -static struct resource s5p_pmu_resource = { - .start = IRQ_PMU, - .end = IRQ_PMU, - .flags = IORESOURCE_IRQ, -}; - -struct platform_device s5p_device_pmu = { - .name = "arm-pmu", - .id = ARM_PMU_DEVICE_CPU, - .num_resources = 1, - .resource = &s5p_pmu_resource, -}; - -static int __init s5p_pmu_init(void) -{ - platform_device_register(&s5p_device_pmu); - return 0; -} -arch_initcall(s5p_pmu_init); diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c deleted file mode 100644 index afaf87fdb93..00000000000 --- a/arch/arm/plat-s5p/dev-uart.c +++ /dev/null @@ -1,197 +0,0 @@ -/* linux/arch/arm/plat-s5p/dev-uart.c - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Base S5P UART resource and device definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/platform_device.h> - -#include <asm/mach/arch.h> -#include <asm/mach/irq.h> -#include <mach/hardware.h> -#include <mach/map.h> - -#include <plat/devs.h> - - /* Serial port registrations */ - -static struct resource s5p_uart0_resource[] = { - [0] = { - .start = S5P_PA_UART0, - .end = S5P_PA_UART0 + S5P_SZ_UART - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_S5P_UART_RX0, - .end = IRQ_S5P_UART_RX0, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_S5P_UART_TX0, - .end = IRQ_S5P_UART_TX0, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = IRQ_S5P_UART_ERR0, - .end = IRQ_S5P_UART_ERR0, - .flags = IORESOURCE_IRQ, - } -}; - -static struct resource s5p_uart1_resource[] = { - [0] = { - .start = S5P_PA_UART1, - .end = S5P_PA_UART1 + S5P_SZ_UART - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_S5P_UART_RX1, - .end = IRQ_S5P_UART_RX1, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_S5P_UART_TX1, - .end = IRQ_S5P_UART_TX1, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = IRQ_S5P_UART_ERR1, - .end = IRQ_S5P_UART_ERR1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource s5p_uart2_resource[] = { - [0] = { - .start = S5P_PA_UART2, - .end = S5P_PA_UART2 + S5P_SZ_UART - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_S5P_UART_RX2, - .end = IRQ_S5P_UART_RX2, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_S5P_UART_TX2, - .end = IRQ_S5P_UART_TX2, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = IRQ_S5P_UART_ERR2, - .end = IRQ_S5P_UART_ERR2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource s5p_uart3_resource[] = { -#if CONFIG_SERIAL_SAMSUNG_UARTS > 3 - [0] = { - .start = S5P_PA_UART3, - .end = S5P_PA_UART3 + S5P_SZ_UART - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_S5P_UART_RX3, - .end = IRQ_S5P_UART_RX3, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_S5P_UART_TX3, - .end = IRQ_S5P_UART_TX3, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = IRQ_S5P_UART_ERR3, - .end = IRQ_S5P_UART_ERR3, - .flags = IORESOURCE_IRQ, - }, -#endif -}; - -static struct resource s5p_uart4_resource[] = { -#if CONFIG_SERIAL_SAMSUNG_UARTS > 4 - [0] = { - .start = S5P_PA_UART4, - .end = S5P_PA_UART4 + S5P_SZ_UART - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_S5P_UART_RX4, - .end = IRQ_S5P_UART_RX4, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_S5P_UART_TX4, - .end = IRQ_S5P_UART_TX4, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = IRQ_S5P_UART_ERR4, - .end = IRQ_S5P_UART_ERR4, - .flags = IORESOURCE_IRQ, - }, -#endif -}; - -static struct resource s5p_uart5_resource[] = { -#if CONFIG_SERIAL_SAMSUNG_UARTS > 5 - [0] = { - .start = S5P_PA_UART5, - .end = S5P_PA_UART5 + S5P_SZ_UART - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_S5P_UART_RX5, - .end = IRQ_S5P_UART_RX5, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_S5P_UART_TX5, - .end = IRQ_S5P_UART_TX5, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = IRQ_S5P_UART_ERR5, - .end = IRQ_S5P_UART_ERR5, - .flags = IORESOURCE_IRQ, - }, -#endif -}; - -struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = { - [0] = { - .resources = s5p_uart0_resource, - .nr_resources = ARRAY_SIZE(s5p_uart0_resource), - }, - [1] = { - .resources = s5p_uart1_resource, - .nr_resources = ARRAY_SIZE(s5p_uart1_resource), - }, - [2] = { - .resources = s5p_uart2_resource, - .nr_resources = ARRAY_SIZE(s5p_uart2_resource), - }, - [3] = { - .resources = s5p_uart3_resource, - .nr_resources = ARRAY_SIZE(s5p_uart3_resource), - }, - [4] = { - .resources = s5p_uart4_resource, - .nr_resources = ARRAY_SIZE(s5p_uart4_resource), - }, - [5] = { - .resources = s5p_uart5_resource, - .nr_resources = ARRAY_SIZE(s5p_uart5_resource), - }, -}; diff --git a/arch/arm/plat-s5p/include/plat/camport.h b/arch/arm/plat-s5p/include/plat/camport.h deleted file mode 100644 index 71688c8ba28..00000000000 --- a/arch/arm/plat-s5p/include/plat/camport.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Copyright (C) 2011 Samsung Electronics Co., Ltd. - * - * S5P series camera interface helper functions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef PLAT_S5P_CAMPORT_H_ -#define PLAT_S5P_CAMPORT_H_ __FILE__ - -enum s5p_camport_id { - S5P_CAMPORT_A, - S5P_CAMPORT_B, -}; - -/* - * The helper functions to configure GPIO for the camera parallel bus. - * The camera port can be multiplexed with any FIMC entity, even multiple - * FIMC entities are allowed to be attached to a single port simultaneously. - * These functions are to be used in the board setup code. - */ -int s5pv210_fimc_setup_gpio(enum s5p_camport_id id); -int exynos4_fimc_setup_gpio(enum s5p_camport_id id); - -#endif diff --git a/arch/arm/plat-s5p/include/plat/exynos4.h b/arch/arm/plat-s5p/include/plat/exynos4.h deleted file mode 100644 index 907caab53dc..00000000000 --- a/arch/arm/plat-s5p/include/plat/exynos4.h +++ /dev/null @@ -1,34 +0,0 @@ -/* linux/arch/arm/plat-s5p/include/plat/exynos4.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Header file for exynos4 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* Common init code for EXYNOS4 related SoCs */ - -extern void exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); -extern void exynos4_register_clocks(void); -extern void exynos4_setup_clocks(void); - -#ifdef CONFIG_CPU_EXYNOS4210 - -extern int exynos4_init(void); -extern void exynos4_init_irq(void); -extern void exynos4_map_io(void); -extern void exynos4_init_clocks(int xtal); -extern struct sys_timer exynos4_timer; - -#define exynos4_init_uarts exynos4_common_init_uarts - -#else -#define exynos4_init_clocks NULL -#define exynos4_init_uarts NULL -#define exynos4_map_io NULL -#define exynos4_init NULL -#endif diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-s5p/include/plat/irqs.h deleted file mode 100644 index ba9121c60a2..00000000000 --- a/arch/arm/plat-s5p/include/plat/irqs.h +++ /dev/null @@ -1,115 +0,0 @@ -/* linux/arch/arm/plat-s5p/include/plat/irqs.h - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P Common IRQ support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_PLAT_S5P_IRQS_H -#define __ASM_PLAT_S5P_IRQS_H __FILE__ - -/* we keep the first set of CPU IRQs out of the range of - * the ISA space, so that the PC104 has them to itself - * and we don't end up having to do horrible things to the - * standard ISA drivers.... - * - * note, since we're using the VICs, our start must be a - * mulitple of 32 to allow the common code to work - */ - -#define S5P_IRQ_OFFSET (32) - -#define S5P_IRQ(x) ((x) + S5P_IRQ_OFFSET) - -#define S5P_VIC0_BASE S5P_IRQ(0) -#define S5P_VIC1_BASE S5P_IRQ(32) -#define S5P_VIC2_BASE S5P_IRQ(64) -#define S5P_VIC3_BASE S5P_IRQ(96) - -#define VIC_BASE(x) (S5P_VIC0_BASE + ((x)*32)) - -#define IRQ_VIC0_BASE S5P_VIC0_BASE -#define IRQ_VIC1_BASE S5P_VIC1_BASE -#define IRQ_VIC2_BASE S5P_VIC2_BASE - -/* UART interrupts, each UART has 4 intterupts per channel so - * use the space between the ISA and S3C main interrupts. Note, these - * are not in the same order as the S3C24XX series! */ - -#define IRQ_S5P_UART_BASE0 (16) -#define IRQ_S5P_UART_BASE1 (20) -#define IRQ_S5P_UART_BASE2 (24) -#define IRQ_S5P_UART_BASE3 (28) - -#define UART_IRQ_RXD (0) -#define UART_IRQ_ERR (1) -#define UART_IRQ_TXD (2) - -#define IRQ_S5P_UART_RX0 (IRQ_S5P_UART_BASE0 + UART_IRQ_RXD) -#define IRQ_S5P_UART_TX0 (IRQ_S5P_UART_BASE0 + UART_IRQ_TXD) -#define IRQ_S5P_UART_ERR0 (IRQ_S5P_UART_BASE0 + UART_IRQ_ERR) - -#define IRQ_S5P_UART_RX1 (IRQ_S5P_UART_BASE1 + UART_IRQ_RXD) -#define IRQ_S5P_UART_TX1 (IRQ_S5P_UART_BASE1 + UART_IRQ_TXD) -#define IRQ_S5P_UART_ERR1 (IRQ_S5P_UART_BASE1 + UART_IRQ_ERR) - -#define IRQ_S5P_UART_RX2 (IRQ_S5P_UART_BASE2 + UART_IRQ_RXD) -#define IRQ_S5P_UART_TX2 (IRQ_S5P_UART_BASE2 + UART_IRQ_TXD) -#define IRQ_S5P_UART_ERR2 (IRQ_S5P_UART_BASE2 + UART_IRQ_ERR) - -#define IRQ_S5P_UART_RX3 (IRQ_S5P_UART_BASE3 + UART_IRQ_RXD) -#define IRQ_S5P_UART_TX3 (IRQ_S5P_UART_BASE3 + UART_IRQ_TXD) -#define IRQ_S5P_UART_ERR3 (IRQ_S5P_UART_BASE3 + UART_IRQ_ERR) - -/* S3C compatibilty defines */ -#define IRQ_S3CUART_RX0 IRQ_S5P_UART_RX0 -#define IRQ_S3CUART_RX1 IRQ_S5P_UART_RX1 -#define IRQ_S3CUART_RX2 IRQ_S5P_UART_RX2 -#define IRQ_S3CUART_RX3 IRQ_S5P_UART_RX3 - -/* VIC based IRQs */ - -#define S5P_IRQ_VIC0(x) (S5P_VIC0_BASE + (x)) -#define S5P_IRQ_VIC1(x) (S5P_VIC1_BASE + (x)) -#define S5P_IRQ_VIC2(x) (S5P_VIC2_BASE + (x)) -#define S5P_IRQ_VIC3(x) (S5P_VIC3_BASE + (x)) - -#define S5P_TIMER_IRQ(x) (11 + (x)) - -#define IRQ_TIMER0 S5P_TIMER_IRQ(0) -#define IRQ_TIMER1 S5P_TIMER_IRQ(1) -#define IRQ_TIMER2 S5P_TIMER_IRQ(2) -#define IRQ_TIMER3 S5P_TIMER_IRQ(3) -#define IRQ_TIMER4 S5P_TIMER_IRQ(4) - -#define IRQ_EINT(x) ((x) < 16 ? ((x) + S5P_EINT_BASE1) \ - : ((x) - 16 + S5P_EINT_BASE2)) - -#define EINT_OFFSET(irq) ((irq) < S5P_EINT_BASE2 ? \ - ((irq) - S5P_EINT_BASE1) : \ - ((irq) + 16 - S5P_EINT_BASE2)) - -#define IRQ_EINT_BIT(x) EINT_OFFSET(x) - -/* Typically only a few gpio chips require gpio interrupt support. - To avoid memory waste irq descriptors are allocated only for - S5P_GPIOINT_GROUP_COUNT chips, each with total number of - S5P_GPIOINT_GROUP_SIZE pins/irqs. Each GPIOINT group can be assiged - to any gpio chip with the s5p_register_gpio_interrupt() function */ -#define S5P_GPIOINT_GROUP_COUNT 4 -#define S5P_GPIOINT_GROUP_SIZE 8 -#define S5P_GPIOINT_COUNT (S5P_GPIOINT_GROUP_COUNT * S5P_GPIOINT_GROUP_SIZE) - -/* IRQ types common for all s5p platforms */ -#define S5P_IRQ_TYPE_LEVEL_LOW (0x00) -#define S5P_IRQ_TYPE_LEVEL_HIGH (0x01) -#define S5P_IRQ_TYPE_EDGE_FALLING (0x02) -#define S5P_IRQ_TYPE_EDGE_RISING (0x03) -#define S5P_IRQ_TYPE_EDGE_BOTH (0x04) - -#endif /* __ASM_PLAT_S5P_IRQS_H */ diff --git a/arch/arm/plat-s5p/include/plat/map-s5p.h b/arch/arm/plat-s5p/include/plat/map-s5p.h deleted file mode 100644 index d973d39666a..00000000000 --- a/arch/arm/plat-s5p/include/plat/map-s5p.h +++ /dev/null @@ -1,60 +0,0 @@ -/* linux/arch/arm/plat-s5p/include/plat/map-s5p.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_PLAT_MAP_S5P_H -#define __ASM_PLAT_MAP_S5P_H __FILE__ - -#define S5P_VA_CHIPID S3C_ADDR(0x02000000) -#define S5P_VA_CMU S3C_ADDR(0x02100000) -#define S5P_VA_PMU S3C_ADDR(0x02180000) -#define S5P_VA_GPIO S3C_ADDR(0x02200000) -#define S5P_VA_GPIO1 S5P_VA_GPIO -#define S5P_VA_GPIO2 S3C_ADDR(0x02240000) -#define S5P_VA_GPIO3 S3C_ADDR(0x02280000) - -#define S5P_VA_SYSRAM S3C_ADDR(0x02400000) -#define S5P_VA_DMC0 S3C_ADDR(0x02440000) -#define S5P_VA_DMC1 S3C_ADDR(0x02480000) -#define S5P_VA_SROMC S3C_ADDR(0x024C0000) - -#define S5P_VA_SYSTIMER S3C_ADDR(0x02500000) -#define S5P_VA_L2CC S3C_ADDR(0x02600000) - -#define S5P_VA_COMBINER_BASE S3C_ADDR(0x02700000) -#define S5P_VA_COMBINER(x) (S5P_VA_COMBINER_BASE + ((x) >> 2) * 0x10) - -#define S5P_VA_COREPERI_BASE S3C_ADDR(0x02800000) -#define S5P_VA_COREPERI(x) (S5P_VA_COREPERI_BASE + (x)) -#define S5P_VA_SCU S5P_VA_COREPERI(0x0) -#define S5P_VA_GIC_CPU S5P_VA_COREPERI(0x100) -#define S5P_VA_TWD S5P_VA_COREPERI(0x600) -#define S5P_VA_GIC_DIST S5P_VA_COREPERI(0x1000) - -#define S3C_VA_USB_HSPHY S3C_ADDR(0x02900000) - -#define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000)) -#define VA_VIC0 VA_VIC(0) -#define VA_VIC1 VA_VIC(1) -#define VA_VIC2 VA_VIC(2) -#define VA_VIC3 VA_VIC(3) - -#define S5P_VA_UART(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET)) -#define S5P_VA_UART0 S5P_VA_UART(0) -#define S5P_VA_UART1 S5P_VA_UART(1) -#define S5P_VA_UART2 S5P_VA_UART(2) -#define S5P_VA_UART3 S5P_VA_UART(3) - -#ifndef S3C_UART_OFFSET -#define S3C_UART_OFFSET (0x400) -#endif - -#endif /* __ASM_PLAT_MAP_S5P_H */ diff --git a/arch/arm/plat-s5p/include/plat/mipi_csis.h b/arch/arm/plat-s5p/include/plat/mipi_csis.h deleted file mode 100644 index 9bd254c5ed2..00000000000 --- a/arch/arm/plat-s5p/include/plat/mipi_csis.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd. - * - * S5P series MIPI CSI slave device support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef PLAT_S5P_MIPI_CSIS_H_ -#define PLAT_S5P_MIPI_CSIS_H_ __FILE__ - -struct platform_device; - -/** - * struct s5p_platform_mipi_csis - platform data for S5P MIPI-CSIS driver - * @clk_rate: bus clock frequency - * @lanes: number of data lanes used - * @alignment: data alignment in bits - * @hs_settle: HS-RX settle time - * @fixed_phy_vdd: false to enable external D-PHY regulator management in the - * driver or true in case this regulator has no enable function - * @phy_enable: pointer to a callback controlling D-PHY enable/reset - */ -struct s5p_platform_mipi_csis { - unsigned long clk_rate; - u8 lanes; - u8 alignment; - u8 hs_settle; - bool fixed_phy_vdd; - int (*phy_enable)(struct platform_device *pdev, bool on); -}; - -/** - * s5p_csis_phy_enable - global MIPI-CSI receiver D-PHY control - * @pdev: MIPI-CSIS platform device - * @on: true to enable D-PHY and deassert its reset - * false to disable D-PHY - */ -int s5p_csis_phy_enable(struct platform_device *pdev, bool on); - -#endif /* PLAT_S5P_MIPI_CSIS_H_ */ diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h deleted file mode 100644 index bf28fadee7a..00000000000 --- a/arch/arm/plat-s5p/include/plat/pll.h +++ /dev/null @@ -1,153 +0,0 @@ -/* arch/arm/plat-s5p/include/plat/pll.h - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P PLL code - * - * Based on arch/arm/plat-s3c64xx/include/plat/pll.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define PLL45XX_MDIV_MASK (0x3FF) -#define PLL45XX_PDIV_MASK (0x3F) -#define PLL45XX_SDIV_MASK (0x7) -#define PLL45XX_MDIV_SHIFT (16) -#define PLL45XX_PDIV_SHIFT (8) -#define PLL45XX_SDIV_SHIFT (0) - -#include <asm/div64.h> - -enum pll45xx_type_t { - pll_4500, - pll_4502, - pll_4508 -}; - -static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con, - enum pll45xx_type_t pll_type) -{ - u32 mdiv, pdiv, sdiv; - u64 fvco = baseclk; - - mdiv = (pll_con >> PLL45XX_MDIV_SHIFT) & PLL45XX_MDIV_MASK; - pdiv = (pll_con >> PLL45XX_PDIV_SHIFT) & PLL45XX_PDIV_MASK; - sdiv = (pll_con >> PLL45XX_SDIV_SHIFT) & PLL45XX_SDIV_MASK; - - if (pll_type == pll_4508) - sdiv = sdiv - 1; - - fvco *= mdiv; - do_div(fvco, (pdiv << sdiv)); - - return (unsigned long)fvco; -} - -#define PLL46XX_KDIV_MASK (0xFFFF) -#define PLL4650C_KDIV_MASK (0xFFF) -#define PLL46XX_MDIV_MASK (0x1FF) -#define PLL46XX_PDIV_MASK (0x3F) -#define PLL46XX_SDIV_MASK (0x7) -#define PLL46XX_MDIV_SHIFT (16) -#define PLL46XX_PDIV_SHIFT (8) -#define PLL46XX_SDIV_SHIFT (0) - -enum pll46xx_type_t { - pll_4600, - pll_4650, - pll_4650c, -}; - -static inline unsigned long s5p_get_pll46xx(unsigned long baseclk, - u32 pll_con0, u32 pll_con1, - enum pll46xx_type_t pll_type) -{ - unsigned long result; - u32 mdiv, pdiv, sdiv, kdiv; - u64 tmp; - - mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK; - pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK; - sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK; - kdiv = pll_con1 & PLL46XX_KDIV_MASK; - - if (pll_type == pll_4650c) - kdiv = pll_con1 & PLL4650C_KDIV_MASK; - else - kdiv = pll_con1 & PLL46XX_KDIV_MASK; - - tmp = baseclk; - - if (pll_type == pll_4600) { - tmp *= (mdiv << 16) + kdiv; - do_div(tmp, (pdiv << sdiv)); - result = tmp >> 16; - } else { - tmp *= (mdiv << 10) + kdiv; - do_div(tmp, (pdiv << sdiv)); - result = tmp >> 10; - } - - return result; -} - -#define PLL90XX_MDIV_MASK (0xFF) -#define PLL90XX_PDIV_MASK (0x3F) -#define PLL90XX_SDIV_MASK (0x7) -#define PLL90XX_KDIV_MASK (0xffff) -#define PLL90XX_MDIV_SHIFT (16) -#define PLL90XX_PDIV_SHIFT (8) -#define PLL90XX_SDIV_SHIFT (0) -#define PLL90XX_KDIV_SHIFT (0) - -static inline unsigned long s5p_get_pll90xx(unsigned long baseclk, - u32 pll_con, u32 pll_conk) -{ - unsigned long result; - u32 mdiv, pdiv, sdiv, kdiv; - u64 tmp; - - mdiv = (pll_con >> PLL90XX_MDIV_SHIFT) & PLL90XX_MDIV_MASK; - pdiv = (pll_con >> PLL90XX_PDIV_SHIFT) & PLL90XX_PDIV_MASK; - sdiv = (pll_con >> PLL90XX_SDIV_SHIFT) & PLL90XX_SDIV_MASK; - kdiv = pll_conk & PLL90XX_KDIV_MASK; - - /* We need to multiple baseclk by mdiv (the integer part) and kdiv - * which is in 2^16ths, so shift mdiv up (does not overflow) and - * add kdiv before multiplying. The use of tmp is to avoid any - * overflows before shifting bac down into result when multipling - * by the mdiv and kdiv pair. - */ - - tmp = baseclk; - tmp *= (mdiv << 16) + kdiv; - do_div(tmp, (pdiv << sdiv)); - result = tmp >> 16; - - return result; -} - -#define PLL65XX_MDIV_MASK (0x3FF) -#define PLL65XX_PDIV_MASK (0x3F) -#define PLL65XX_SDIV_MASK (0x7) -#define PLL65XX_MDIV_SHIFT (16) -#define PLL65XX_PDIV_SHIFT (8) -#define PLL65XX_SDIV_SHIFT (0) - -static inline unsigned long s5p_get_pll65xx(unsigned long baseclk, u32 pll_con) -{ - u32 mdiv, pdiv, sdiv; - u64 fvco = baseclk; - - mdiv = (pll_con >> PLL65XX_MDIV_SHIFT) & PLL65XX_MDIV_MASK; - pdiv = (pll_con >> PLL65XX_PDIV_SHIFT) & PLL65XX_PDIV_MASK; - sdiv = (pll_con >> PLL65XX_SDIV_SHIFT) & PLL65XX_SDIV_MASK; - - fvco *= mdiv; - do_div(fvco, (pdiv << sdiv)); - - return (unsigned long)fvco; -} diff --git a/arch/arm/plat-s5p/include/plat/regs-srom.h b/arch/arm/plat-s5p/include/plat/regs-srom.h deleted file mode 100644 index f121ab5e76c..00000000000 --- a/arch/arm/plat-s5p/include/plat/regs-srom.h +++ /dev/null @@ -1,54 +0,0 @@ -/* linux/arch/arm/plat-s5p/include/plat/regs-srom.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P SROMC register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_PLAT_S5P_REGS_SROM_H -#define __ASM_PLAT_S5P_REGS_SROM_H __FILE__ - -#include <mach/map.h> - -#define S5P_SROMREG(x) (S5P_VA_SROMC + (x)) - -#define S5P_SROM_BW S5P_SROMREG(0x0) -#define S5P_SROM_BC0 S5P_SROMREG(0x4) -#define S5P_SROM_BC1 S5P_SROMREG(0x8) -#define S5P_SROM_BC2 S5P_SROMREG(0xc) -#define S5P_SROM_BC3 S5P_SROMREG(0x10) -#define S5P_SROM_BC4 S5P_SROMREG(0x14) -#define S5P_SROM_BC5 S5P_SROMREG(0x18) - -/* one register BW holds 4 x 4-bit packed settings for NCS0 - NCS3 */ - -#define S5P_SROM_BW__DATAWIDTH__SHIFT 0 -#define S5P_SROM_BW__ADDRMODE__SHIFT 1 -#define S5P_SROM_BW__WAITENABLE__SHIFT 2 -#define S5P_SROM_BW__BYTEENABLE__SHIFT 3 - -#define S5P_SROM_BW__CS_MASK 0xf - -#define S5P_SROM_BW__NCS0__SHIFT 0 -#define S5P_SROM_BW__NCS1__SHIFT 4 -#define S5P_SROM_BW__NCS2__SHIFT 8 -#define S5P_SROM_BW__NCS3__SHIFT 12 -#define S5P_SROM_BW__NCS4__SHIFT 16 -#define S5P_SROM_BW__NCS5__SHIFT 20 - -/* applies to same to BCS0 - BCS3 */ - -#define S5P_SROM_BCX__PMC__SHIFT 0 -#define S5P_SROM_BCX__TACP__SHIFT 4 -#define S5P_SROM_BCX__TCAH__SHIFT 8 -#define S5P_SROM_BCX__TCOH__SHIFT 12 -#define S5P_SROM_BCX__TACC__SHIFT 16 -#define S5P_SROM_BCX__TCOS__SHIFT 24 -#define S5P_SROM_BCX__TACS__SHIFT 28 - -#endif /* __ASM_PLAT_S5P_REGS_SROM_H */ diff --git a/arch/arm/plat-s5p/include/plat/reset.h b/arch/arm/plat-s5p/include/plat/reset.h deleted file mode 100644 index 335e97812ee..00000000000 --- a/arch/arm/plat-s5p/include/plat/reset.h +++ /dev/null @@ -1,16 +0,0 @@ -/* linux/arch/arm/plat-s5p/include/plat/reset.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_PLAT_S5P_RESET_H -#define __ASM_PLAT_S5P_RESET_H __FILE__ - -extern void (*s5p_reset_hook)(void); - -#endif /* __ASM_PLAT_S5P_RESET_H */ diff --git a/arch/arm/plat-s5p/include/plat/s5p-clock.h b/arch/arm/plat-s5p/include/plat/s5p-clock.h deleted file mode 100644 index 2b6dcff8ab2..00000000000 --- a/arch/arm/plat-s5p/include/plat/s5p-clock.h +++ /dev/null @@ -1,50 +0,0 @@ -/* linux/arch/arm/plat-s5p/include/plat/s5p-clock.h - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Header file for s5p clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_PLAT_S5P_CLOCK_H -#define __ASM_PLAT_S5P_CLOCK_H __FILE__ - -#include <linux/clk.h> - -#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1) - -#define clk_fin_apll clk_ext_xtal_mux -#define clk_fin_mpll clk_ext_xtal_mux -#define clk_fin_epll clk_ext_xtal_mux -#define clk_fin_dpll clk_ext_xtal_mux -#define clk_fin_vpll clk_ext_xtal_mux -#define clk_fin_hpll clk_ext_xtal_mux - -extern struct clk clk_ext_xtal_mux; -extern struct clk clk_xusbxti; -extern struct clk clk_48m; -extern struct clk s5p_clk_27m; -extern struct clk clk_fout_apll; -extern struct clk clk_fout_mpll; -extern struct clk clk_fout_epll; -extern struct clk clk_fout_dpll; -extern struct clk clk_fout_vpll; -extern struct clk clk_arm; -extern struct clk clk_vpll; - -extern struct clksrc_sources clk_src_apll; -extern struct clksrc_sources clk_src_mpll; -extern struct clksrc_sources clk_src_epll; -extern struct clksrc_sources clk_src_dpll; - -extern int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable); - -/* Common EPLL operations for S5P platform */ -extern int s5p_epll_enable(struct clk *clk, int enable); -extern unsigned long s5p_epll_get_rate(struct clk *clk); - -#endif /* __ASM_PLAT_S5P_CLOCK_H */ diff --git a/arch/arm/plat-s5p/include/plat/s5p-time.h b/arch/arm/plat-s5p/include/plat/s5p-time.h deleted file mode 100644 index 575e88109db..00000000000 --- a/arch/arm/plat-s5p/include/plat/s5p-time.h +++ /dev/null @@ -1,40 +0,0 @@ -/* linux/arch/arm/plat-s5p/include/plat/s5p-time.h - * - * Copyright 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Header file for s5p time support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_PLAT_S5P_TIME_H -#define __ASM_PLAT_S5P_TIME_H __FILE__ - -/* S5P HR-Timer Clock mode */ -enum s5p_timer_mode { - S5P_PWM0, - S5P_PWM1, - S5P_PWM2, - S5P_PWM3, - S5P_PWM4, -}; - -struct s5p_timer_source { - unsigned int event_id; - unsigned int source_id; -}; - -/* Be able to sleep for atleast 4 seconds (usually more) */ -#define S5PTIMER_MIN_RANGE 4 - -#define TCNT_MAX 0xffffffff -#define NON_PERIODIC 0 -#define PERIODIC 1 - -extern void __init s5p_set_timer_source(enum s5p_timer_mode event, - enum s5p_timer_mode source); -extern struct sys_timer s5p_timer; -#endif /* __ASM_PLAT_S5P_TIME_H */ diff --git a/arch/arm/plat-s5p/include/plat/s5p6440.h b/arch/arm/plat-s5p/include/plat/s5p6440.h deleted file mode 100644 index 528585d2caf..00000000000 --- a/arch/arm/plat-s5p/include/plat/s5p6440.h +++ /dev/null @@ -1,36 +0,0 @@ -/* arch/arm/plat-s5p/include/plat/s5p6440.h - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Header file for s5p6440 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - - /* Common init code for S5P6440 related SoCs */ - -extern void s5p6440_register_clocks(void); -extern void s5p6440_setup_clocks(void); - -#ifdef CONFIG_CPU_S5P6440 - -extern int s5p64x0_init(void); -extern void s5p6440_init_irq(void); -extern void s5p6440_map_io(void); -extern void s5p6440_init_clocks(int xtal); - -extern void s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -#else -#define s5p6440_init_clocks NULL -#define s5p6440_init_uarts NULL -#define s5p6440_map_io NULL -#define s5p64x0_init NULL -#endif - -/* S5P6440 timer */ - -extern struct sys_timer s5p6440_timer; diff --git a/arch/arm/plat-s5p/include/plat/s5p6442.h b/arch/arm/plat-s5p/include/plat/s5p6442.h deleted file mode 100644 index 7b8801349c9..00000000000 --- a/arch/arm/plat-s5p/include/plat/s5p6442.h +++ /dev/null @@ -1,33 +0,0 @@ -/* arch/arm/plat-s5p/include/plat/s5p6442.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Header file for s5p6442 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* Common init code for S5P6442 related SoCs */ - -extern void s5p6442_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); -extern void s5p6442_register_clocks(void); -extern void s5p6442_setup_clocks(void); - -#ifdef CONFIG_CPU_S5P6442 - -extern int s5p6442_init(void); -extern void s5p6442_init_irq(void); -extern void s5p6442_map_io(void); -extern void s5p6442_init_clocks(int xtal); - -#define s5p6442_init_uarts s5p6442_common_init_uarts - -#else -#define s5p6442_init_clocks NULL -#define s5p6442_init_uarts NULL -#define s5p6442_map_io NULL -#define s5p6442_init NULL -#endif diff --git a/arch/arm/plat-s5p/include/plat/s5p6450.h b/arch/arm/plat-s5p/include/plat/s5p6450.h deleted file mode 100644 index 640a41c26be..00000000000 --- a/arch/arm/plat-s5p/include/plat/s5p6450.h +++ /dev/null @@ -1,36 +0,0 @@ -/* arch/arm/plat-s5p/include/plat/s5p6450.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Header file for s5p6450 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* Common init code for S5P6450 related SoCs */ - -extern void s5p6450_register_clocks(void); -extern void s5p6450_setup_clocks(void); - -#ifdef CONFIG_CPU_S5P6450 - -extern int s5p64x0_init(void); -extern void s5p6450_init_irq(void); -extern void s5p6450_map_io(void); -extern void s5p6450_init_clocks(int xtal); - -extern void s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -#else -#define s5p6450_init_clocks NULL -#define s5p6450_init_uarts NULL -#define s5p6450_map_io NULL -#define s5p64x0_init NULL -#endif - -/* S5P6450 timer */ - -extern struct sys_timer s5p6450_timer; diff --git a/arch/arm/plat-s5p/include/plat/s5pc100.h b/arch/arm/plat-s5p/include/plat/s5pc100.h deleted file mode 100644 index 5f6099dd7ca..00000000000 --- a/arch/arm/plat-s5p/include/plat/s5pc100.h +++ /dev/null @@ -1,33 +0,0 @@ -/* arch/arm/plat-s5p/include/plat/s5pc100.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Header file for s5pc100 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* Common init code for S5PC100 related SoCs */ - -extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); -extern void s5pc100_register_clocks(void); -extern void s5pc100_setup_clocks(void); - -#ifdef CONFIG_CPU_S5PC100 - -extern int s5pc100_init(void); -extern void s5pc100_init_irq(void); -extern void s5pc100_map_io(void); -extern void s5pc100_init_clocks(int xtal); - -#define s5pc100_init_uarts s5pc100_common_init_uarts - -#else -#define s5pc100_init_clocks NULL -#define s5pc100_init_uarts NULL -#define s5pc100_map_io NULL -#define s5pc100_init NULL -#endif diff --git a/arch/arm/plat-s5p/include/plat/s5pv210.h b/arch/arm/plat-s5p/include/plat/s5pv210.h deleted file mode 100644 index 6c93a0c7810..00000000000 --- a/arch/arm/plat-s5p/include/plat/s5pv210.h +++ /dev/null @@ -1,33 +0,0 @@ -/* linux/arch/arm/plat-s5p/include/plat/s5pv210.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Header file for s5pv210 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* Common init code for S5PV210 related SoCs */ - -extern void s5pv210_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); -extern void s5pv210_register_clocks(void); -extern void s5pv210_setup_clocks(void); - -#ifdef CONFIG_CPU_S5PV210 - -extern int s5pv210_init(void); -extern void s5pv210_init_irq(void); -extern void s5pv210_map_io(void); -extern void s5pv210_init_clocks(int xtal); - -#define s5pv210_init_uarts s5pv210_common_init_uarts - -#else -#define s5pv210_init_clocks NULL -#define s5pv210_init_uarts NULL -#define s5pv210_map_io NULL -#define s5pv210_init NULL -#endif diff --git a/arch/arm/plat-s5p/include/plat/sysmmu.h b/arch/arm/plat-s5p/include/plat/sysmmu.h deleted file mode 100644 index bf5283c2a19..00000000000 --- a/arch/arm/plat-s5p/include/plat/sysmmu.h +++ /dev/null @@ -1,95 +0,0 @@ -/* linux/arch/arm/plat-s5p/include/plat/sysmmu.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Samsung System MMU driver for S5P platform - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM__PLAT_SYSMMU_H -#define __ASM__PLAT_SYSMMU_H __FILE__ - -enum S5P_SYSMMU_INTERRUPT_TYPE { - SYSMMU_PAGEFAULT, - SYSMMU_AR_MULTIHIT, - SYSMMU_AW_MULTIHIT, - SYSMMU_BUSERROR, - SYSMMU_AR_SECURITY, - SYSMMU_AR_ACCESS, - SYSMMU_AW_SECURITY, - SYSMMU_AW_PROTECTION, /* 7 */ - SYSMMU_FAULTS_NUM -}; - -#ifdef CONFIG_S5P_SYSTEM_MMU - -#include <mach/sysmmu.h> - -/** - * s5p_sysmmu_enable() - enable system mmu of ip - * @ips: The ip connected system mmu. - * #pgd: Base physical address of the 1st level page table - * - * This function enable system mmu to transfer address - * from virtual address to physical address - */ -void s5p_sysmmu_enable(sysmmu_ips ips, unsigned long pgd); - -/** - * s5p_sysmmu_disable() - disable sysmmu mmu of ip - * @ips: The ip connected system mmu. - * - * This function disable system mmu to transfer address - * from virtual address to physical address - */ -void s5p_sysmmu_disable(sysmmu_ips ips); - -/** - * s5p_sysmmu_set_tablebase_pgd() - set page table base address to refer page table - * @ips: The ip connected system mmu. - * @pgd: The page table base address. - * - * This function set page table base address - * When system mmu transfer address from virtaul address to physical address, - * system mmu refer address information from page table - */ -void s5p_sysmmu_set_tablebase_pgd(sysmmu_ips ips, unsigned long pgd); - -/** - * s5p_sysmmu_tlb_invalidate() - flush all TLB entry in system mmu - * @ips: The ip connected system mmu. - * - * This function flush all TLB entry in system mmu - */ -void s5p_sysmmu_tlb_invalidate(sysmmu_ips ips); - -/** s5p_sysmmu_set_fault_handler() - Fault handler for System MMUs - * @itype: type of fault. - * @pgtable_base: the physical address of page table base. This is 0 if @ips is - * SYSMMU_BUSERROR. - * @fault_addr: the device (virtual) address that the System MMU tried to - * translated. This is 0 if @ips is SYSMMU_BUSERROR. - * Called when interrupt occurred by the System MMUs - * The device drivers of peripheral devices that has a System MMU can implement - * a fault handler to resolve address translation fault by System MMU. - * The meanings of return value and parameters are described below. - - * return value: non-zero if the fault is correctly resolved. - * zero if the fault is not handled. - */ -void s5p_sysmmu_set_fault_handler(sysmmu_ips ips, - int (*handler)(enum S5P_SYSMMU_INTERRUPT_TYPE itype, - unsigned long pgtable_base, - unsigned long fault_addr)); -#else -#define s5p_sysmmu_enable(ips, pgd) do { } while (0) -#define s5p_sysmmu_disable(ips) do { } while (0) -#define s5p_sysmmu_set_tablebase_pgd(ips, pgd) do { } while (0) -#define s5p_sysmmu_tlb_invalidate(ips) do { } while (0) -#define s5p_sysmmu_set_fault_handler(ips, handler) do { } while (0) -#endif -#endif /* __ASM_PLAT_SYSMMU_H */ diff --git a/arch/arm/plat-s5p/include/plat/system-reset.h b/arch/arm/plat-s5p/include/plat/system-reset.h deleted file mode 100644 index f307f34e642..00000000000 --- a/arch/arm/plat-s5p/include/plat/system-reset.h +++ /dev/null @@ -1,31 +0,0 @@ -/* linux/arch/arm/plat-s5p/include/plat/system-reset.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Based on arch/arm/mach-s3c2410/include/mach/system-reset.h - * - * S5P - System define for arch_reset() - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <plat/watchdog-reset.h> - -void (*s5p_reset_hook)(void); - -static void arch_reset(char mode, const char *cmd) -{ - /* SWRESET support in s5p_reset_hook() */ - - if (s5p_reset_hook) - s5p_reset_hook(); - - /* Perform reset using Watchdog reset - * if there is no s5p_reset_hook() - */ - - arch_wdt_reset(); -} diff --git a/arch/arm/plat-s5p/irq-eint.c b/arch/arm/plat-s5p/irq-eint.c deleted file mode 100644 index 225aa25405d..00000000000 --- a/arch/arm/plat-s5p/irq-eint.c +++ /dev/null @@ -1,220 +0,0 @@ -/* linux/arch/arm/plat-s5p/irq-eint.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P - IRQ EINT support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/sysdev.h> -#include <linux/gpio.h> - -#include <asm/hardware/vic.h> - -#include <plat/regs-irqtype.h> - -#include <mach/map.h> -#include <plat/cpu.h> -#include <plat/pm.h> - -#include <plat/gpio-cfg.h> -#include <mach/regs-gpio.h> - -static inline void s5p_irq_eint_mask(struct irq_data *data) -{ - u32 mask; - - mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq))); - mask |= eint_irq_to_bit(data->irq); - __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq))); -} - -static void s5p_irq_eint_unmask(struct irq_data *data) -{ - u32 mask; - - mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq))); - mask &= ~(eint_irq_to_bit(data->irq)); - __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq))); -} - -static inline void s5p_irq_eint_ack(struct irq_data *data) -{ - __raw_writel(eint_irq_to_bit(data->irq), - S5P_EINT_PEND(EINT_REG_NR(data->irq))); -} - -static void s5p_irq_eint_maskack(struct irq_data *data) -{ - /* compiler should in-line these */ - s5p_irq_eint_mask(data); - s5p_irq_eint_ack(data); -} - -static int s5p_irq_eint_set_type(struct irq_data *data, unsigned int type) -{ - int offs = EINT_OFFSET(data->irq); - int shift; - u32 ctrl, mask; - u32 newvalue = 0; - - switch (type) { - case IRQ_TYPE_EDGE_RISING: - newvalue = S5P_IRQ_TYPE_EDGE_RISING; - break; - - case IRQ_TYPE_EDGE_FALLING: - newvalue = S5P_IRQ_TYPE_EDGE_FALLING; - break; - - case IRQ_TYPE_EDGE_BOTH: - newvalue = S5P_IRQ_TYPE_EDGE_BOTH; - break; - - case IRQ_TYPE_LEVEL_LOW: - newvalue = S5P_IRQ_TYPE_LEVEL_LOW; - break; - - case IRQ_TYPE_LEVEL_HIGH: - newvalue = S5P_IRQ_TYPE_LEVEL_HIGH; - break; - - default: - printk(KERN_ERR "No such irq type %d", type); - return -EINVAL; - } - - shift = (offs & 0x7) * 4; - mask = 0x7 << shift; - - ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(data->irq))); - ctrl &= ~mask; - ctrl |= newvalue << shift; - __raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(data->irq))); - - if ((0 <= offs) && (offs < 8)) - s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE); - - else if ((8 <= offs) && (offs < 16)) - s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE); - - else if ((16 <= offs) && (offs < 24)) - s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE); - - else if ((24 <= offs) && (offs < 32)) - s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE); - - else - printk(KERN_ERR "No such irq number %d", offs); - - return 0; -} - -static struct irq_chip s5p_irq_eint = { - .name = "s5p-eint", - .irq_mask = s5p_irq_eint_mask, - .irq_unmask = s5p_irq_eint_unmask, - .irq_mask_ack = s5p_irq_eint_maskack, - .irq_ack = s5p_irq_eint_ack, - .irq_set_type = s5p_irq_eint_set_type, -#ifdef CONFIG_PM - .irq_set_wake = s3c_irqext_wake, -#endif -}; - -/* s5p_irq_demux_eint - * - * This function demuxes the IRQ from the group0 external interrupts, - * from EINTs 16 to 31. It is designed to be inlined into the specific - * handler s5p_irq_demux_eintX_Y. - * - * Each EINT pend/mask registers handle eight of them. - */ -static inline void s5p_irq_demux_eint(unsigned int start) -{ - u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start))); - u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start))); - unsigned int irq; - - status &= ~mask; - status &= 0xff; - - while (status) { - irq = fls(status) - 1; - generic_handle_irq(irq + start); - status &= ~(1 << irq); - } -} - -static void s5p_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) -{ - s5p_irq_demux_eint(IRQ_EINT(16)); - s5p_irq_demux_eint(IRQ_EINT(24)); -} - -static inline void s5p_irq_vic_eint_mask(struct irq_data *data) -{ - void __iomem *base = irq_data_get_irq_chip_data(data); - - s5p_irq_eint_mask(data); - writel(1 << EINT_OFFSET(data->irq), base + VIC_INT_ENABLE_CLEAR); -} - -static void s5p_irq_vic_eint_unmask(struct irq_data *data) -{ - void __iomem *base = irq_data_get_irq_chip_data(data); - - s5p_irq_eint_unmask(data); - writel(1 << EINT_OFFSET(data->irq), base + VIC_INT_ENABLE); -} - -static inline void s5p_irq_vic_eint_ack(struct irq_data *data) -{ - __raw_writel(eint_irq_to_bit(data->irq), - S5P_EINT_PEND(EINT_REG_NR(data->irq))); -} - -static void s5p_irq_vic_eint_maskack(struct irq_data *data) -{ - s5p_irq_vic_eint_mask(data); - s5p_irq_vic_eint_ack(data); -} - -static struct irq_chip s5p_irq_vic_eint = { - .name = "s5p_vic_eint", - .irq_mask = s5p_irq_vic_eint_mask, - .irq_unmask = s5p_irq_vic_eint_unmask, - .irq_mask_ack = s5p_irq_vic_eint_maskack, - .irq_ack = s5p_irq_vic_eint_ack, - .irq_set_type = s5p_irq_eint_set_type, -#ifdef CONFIG_PM - .irq_set_wake = s3c_irqext_wake, -#endif -}; - -int __init s5p_init_irq_eint(void) -{ - int irq; - - for (irq = IRQ_EINT(0); irq <= IRQ_EINT(15); irq++) - set_irq_chip(irq, &s5p_irq_vic_eint); - - for (irq = IRQ_EINT(16); irq <= IRQ_EINT(31); irq++) { - set_irq_chip(irq, &s5p_irq_eint); - set_irq_handler(irq, handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } - - set_irq_chained_handler(IRQ_EINT16_31, s5p_irq_demux_eint16_31); - return 0; -} - -arch_initcall(s5p_init_irq_eint); diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c deleted file mode 100644 index cd87d3256e0..00000000000 --- a/arch/arm/plat-s5p/irq-gpioint.c +++ /dev/null @@ -1,271 +0,0 @@ -/* linux/arch/arm/plat-s5p/irq-gpioint.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * Author: Kyungmin Park <kyungmin.park@samsung.com> - * Author: Joonyoung Shim <jy0922.shim@samsung.com> - * Author: Marek Szyprowski <m.szyprowski@samsung.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/slab.h> - -#include <mach/map.h> -#include <plat/gpio-core.h> -#include <plat/gpio-cfg.h> - -#define GPIO_BASE(chip) (((unsigned long)(chip)->base) & 0xFFFFF000u) - -#define CON_OFFSET 0x700 -#define MASK_OFFSET 0x900 -#define PEND_OFFSET 0xA00 -#define REG_OFFSET(x) ((x) << 2) - -struct s5p_gpioint_bank { - struct list_head list; - int start; - int nr_groups; - int irq; - struct s3c_gpio_chip **chips; - void (*handler)(unsigned int, struct irq_desc *); -}; - -LIST_HEAD(banks); - -static int s5p_gpioint_get_offset(struct irq_data *data) -{ - struct s3c_gpio_chip *chip = irq_data_get_irq_data(data); - return data->irq - chip->irq_base; -} - -static void s5p_gpioint_ack(struct irq_data *data) -{ - struct s3c_gpio_chip *chip = irq_data_get_irq_data(data); - int group, offset, pend_offset; - unsigned int value; - - group = chip->group; - offset = s5p_gpioint_get_offset(data); - pend_offset = REG_OFFSET(group); - - value = __raw_readl(GPIO_BASE(chip) + PEND_OFFSET + pend_offset); - value |= BIT(offset); - __raw_writel(value, GPIO_BASE(chip) + PEND_OFFSET + pend_offset); -} - -static void s5p_gpioint_mask(struct irq_data *data) -{ - struct s3c_gpio_chip *chip = irq_data_get_irq_data(data); - int group, offset, mask_offset; - unsigned int value; - - group = chip->group; - offset = s5p_gpioint_get_offset(data); - mask_offset = REG_OFFSET(group); - - value = __raw_readl(GPIO_BASE(chip) + MASK_OFFSET + mask_offset); - value |= BIT(offset); - __raw_writel(value, GPIO_BASE(chip) + MASK_OFFSET + mask_offset); -} - -static void s5p_gpioint_unmask(struct irq_data *data) -{ - struct s3c_gpio_chip *chip = irq_data_get_irq_data(data); - int group, offset, mask_offset; - unsigned int value; - - group = chip->group; - offset = s5p_gpioint_get_offset(data); - mask_offset = REG_OFFSET(group); - - value = __raw_readl(GPIO_BASE(chip) + MASK_OFFSET + mask_offset); - value &= ~BIT(offset); - __raw_writel(value, GPIO_BASE(chip) + MASK_OFFSET + mask_offset); -} - -static void s5p_gpioint_mask_ack(struct irq_data *data) -{ - s5p_gpioint_mask(data); - s5p_gpioint_ack(data); -} - -static int s5p_gpioint_set_type(struct irq_data *data, unsigned int type) -{ - struct s3c_gpio_chip *chip = irq_data_get_irq_data(data); - int group, offset, con_offset; - unsigned int value; - - group = chip->group; - offset = s5p_gpioint_get_offset(data); - con_offset = REG_OFFSET(group); - - switch (type) { - case IRQ_TYPE_EDGE_RISING: - type = S5P_IRQ_TYPE_EDGE_RISING; - break; - case IRQ_TYPE_EDGE_FALLING: - type = S5P_IRQ_TYPE_EDGE_FALLING; - break; - case IRQ_TYPE_EDGE_BOTH: - type = S5P_IRQ_TYPE_EDGE_BOTH; - break; - case IRQ_TYPE_LEVEL_HIGH: - type = S5P_IRQ_TYPE_LEVEL_HIGH; - break; - case IRQ_TYPE_LEVEL_LOW: - type = S5P_IRQ_TYPE_LEVEL_LOW; - break; - case IRQ_TYPE_NONE: - default: - printk(KERN_WARNING "No irq type\n"); - return -EINVAL; - } - - value = __raw_readl(GPIO_BASE(chip) + CON_OFFSET + con_offset); - value &= ~(0x7 << (offset * 0x4)); - value |= (type << (offset * 0x4)); - __raw_writel(value, GPIO_BASE(chip) + CON_OFFSET + con_offset); - - return 0; -} - -static struct irq_chip s5p_gpioint = { - .name = "s5p_gpioint", - .irq_ack = s5p_gpioint_ack, - .irq_mask = s5p_gpioint_mask, - .irq_mask_ack = s5p_gpioint_mask_ack, - .irq_unmask = s5p_gpioint_unmask, - .irq_set_type = s5p_gpioint_set_type, -}; - -static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc) -{ - struct s5p_gpioint_bank *bank = get_irq_data(irq); - int group, pend_offset, mask_offset; - unsigned int pend, mask; - - for (group = 0; group < bank->nr_groups; group++) { - struct s3c_gpio_chip *chip = bank->chips[group]; - if (!chip) - continue; - - pend_offset = REG_OFFSET(group); - pend = __raw_readl(GPIO_BASE(chip) + PEND_OFFSET + pend_offset); - if (!pend) - continue; - - mask_offset = REG_OFFSET(group); - mask = __raw_readl(GPIO_BASE(chip) + MASK_OFFSET + mask_offset); - pend &= ~mask; - - while (pend) { - int offset = fls(pend) - 1; - int real_irq = chip->irq_base + offset; - generic_handle_irq(real_irq); - pend &= ~BIT(offset); - } - } -} - -static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip) -{ - static int used_gpioint_groups = 0; - int irq, group = chip->group; - int i; - struct s5p_gpioint_bank *bank = NULL; - - if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT) - return -ENOMEM; - - list_for_each_entry(bank, &banks, list) { - if (group >= bank->start && - group < bank->start + bank->nr_groups) - break; - } - if (!bank) - return -EINVAL; - - if (!bank->handler) { - bank->chips = kzalloc(sizeof(struct s3c_gpio_chip *) * - bank->nr_groups, GFP_KERNEL); - if (!bank->chips) - return -ENOMEM; - - set_irq_chained_handler(bank->irq, s5p_gpioint_handler); - set_irq_data(bank->irq, bank); - bank->handler = s5p_gpioint_handler; - printk(KERN_INFO "Registered chained gpio int handler for interrupt %d.\n", - bank->irq); - } - - /* - * chained GPIO irq has been sucessfully registered, allocate new gpio - * int group and assign irq nubmers - */ - - chip->irq_base = S5P_GPIOINT_BASE + - used_gpioint_groups * S5P_GPIOINT_GROUP_SIZE; - used_gpioint_groups++; - - bank->chips[group - bank->start] = chip; - for (i = 0; i < chip->chip.ngpio; i++) { - irq = chip->irq_base + i; - set_irq_chip(irq, &s5p_gpioint); - set_irq_data(irq, chip); - set_irq_handler(irq, handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } - return 0; -} - -int __init s5p_register_gpio_interrupt(int pin) -{ - struct s3c_gpio_chip *my_chip = s3c_gpiolib_getchip(pin); - int offset, group; - int ret; - - if (!my_chip) - return -EINVAL; - - offset = pin - my_chip->chip.base; - group = my_chip->group; - - /* check if the group has been already registered */ - if (my_chip->irq_base) - return my_chip->irq_base + offset; - - /* register gpio group */ - ret = s5p_gpioint_add(my_chip); - if (ret == 0) { - my_chip->chip.to_irq = samsung_gpiolib_to_irq; - printk(KERN_INFO "Registered interrupt support for gpio group %d.\n", - group); - return my_chip->irq_base + offset; - } - return ret; -} - -int __init s5p_register_gpioint_bank(int chain_irq, int start, int nr_groups) -{ - struct s5p_gpioint_bank *bank; - - bank = kzalloc(sizeof(*bank), GFP_KERNEL); - if (!bank) - return -ENOMEM; - - bank->start = start; - bank->nr_groups = nr_groups; - bank->irq = chain_irq; - - list_add_tail(&bank->list, &banks); - return 0; -} diff --git a/arch/arm/plat-s5p/irq-pm.c b/arch/arm/plat-s5p/irq-pm.c deleted file mode 100644 index 5259ad458bc..00000000000 --- a/arch/arm/plat-s5p/irq-pm.c +++ /dev/null @@ -1,93 +0,0 @@ -/* linux/arch/arm/plat-s5p/irq-pm.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Based on arch/arm/plat-s3c24xx/irq-pm.c, - * Copyright (c) 2003,2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/sysdev.h> - -#include <plat/cpu.h> -#include <plat/irqs.h> -#include <plat/pm.h> -#include <mach/map.h> - -#include <mach/regs-gpio.h> -#include <mach/regs-irq.h> - -/* state for IRQs over sleep */ - -/* default is to allow for EINT0..EINT31, and IRQ_RTC_TIC, IRQ_RTC_ALARM, - * as wakeup sources - * - * set bit to 1 in allow bitfield to enable the wakeup settings on it -*/ - -unsigned long s3c_irqwake_intallow = 0x00000006L; -unsigned long s3c_irqwake_eintallow = 0xffffffffL; - -int s3c_irq_wake(struct irq_data *data, unsigned int state) -{ - unsigned long irqbit; - - switch (data->irq) { - case IRQ_RTC_TIC: - case IRQ_RTC_ALARM: - irqbit = 1 << (data->irq + 1 - IRQ_RTC_ALARM); - if (!state) - s3c_irqwake_intmask |= irqbit; - else - s3c_irqwake_intmask &= ~irqbit; - break; - default: - return -ENOENT; - } - return 0; -} - -static struct sleep_save eint_save[] = { - SAVE_ITEM(S5P_EINT_CON(0)), - SAVE_ITEM(S5P_EINT_CON(1)), - SAVE_ITEM(S5P_EINT_CON(2)), - SAVE_ITEM(S5P_EINT_CON(3)), - - SAVE_ITEM(S5P_EINT_FLTCON(0)), - SAVE_ITEM(S5P_EINT_FLTCON(1)), - SAVE_ITEM(S5P_EINT_FLTCON(2)), - SAVE_ITEM(S5P_EINT_FLTCON(3)), - SAVE_ITEM(S5P_EINT_FLTCON(4)), - SAVE_ITEM(S5P_EINT_FLTCON(5)), - SAVE_ITEM(S5P_EINT_FLTCON(6)), - SAVE_ITEM(S5P_EINT_FLTCON(7)), - - SAVE_ITEM(S5P_EINT_MASK(0)), - SAVE_ITEM(S5P_EINT_MASK(1)), - SAVE_ITEM(S5P_EINT_MASK(2)), - SAVE_ITEM(S5P_EINT_MASK(3)), -}; - -int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state) -{ - s3c_pm_do_save(eint_save, ARRAY_SIZE(eint_save)); - - return 0; -} - -int s3c24xx_irq_resume(struct sys_device *dev) -{ - s3c_pm_do_restore(eint_save, ARRAY_SIZE(eint_save)); - - return 0; -} - diff --git a/arch/arm/plat-s5p/irq.c b/arch/arm/plat-s5p/irq.c deleted file mode 100644 index 5560b12035d..00000000000 --- a/arch/arm/plat-s5p/irq.c +++ /dev/null @@ -1,74 +0,0 @@ -/* arch/arm/plat-s5p/irq.c - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P - Interrupt handling - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/io.h> - -#include <asm/hardware/vic.h> - -#include <linux/serial_core.h> -#include <mach/map.h> -#include <plat/regs-timer.h> -#include <plat/regs-serial.h> -#include <plat/cpu.h> -#include <plat/irq-vic-timer.h> -#include <plat/irq-uart.h> - -/* - * Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3] - * are consecutive when looking up the interrupt in the demux routines. - */ -static struct s3c_uart_irq uart_irqs[] = { - [0] = { - .regs = S5P_VA_UART0, - .base_irq = IRQ_S5P_UART_BASE0, - .parent_irq = IRQ_UART0, - }, - [1] = { - .regs = S5P_VA_UART1, - .base_irq = IRQ_S5P_UART_BASE1, - .parent_irq = IRQ_UART1, - }, - [2] = { - .regs = S5P_VA_UART2, - .base_irq = IRQ_S5P_UART_BASE2, - .parent_irq = IRQ_UART2, - }, -#if CONFIG_SERIAL_SAMSUNG_UARTS > 3 - [3] = { - .regs = S5P_VA_UART3, - .base_irq = IRQ_S5P_UART_BASE3, - .parent_irq = IRQ_UART3, - }, -#endif -}; - -void __init s5p_init_irq(u32 *vic, u32 num_vic) -{ -#ifdef CONFIG_ARM_VIC - int irq; - - /* initialize the VICs */ - for (irq = 0; irq < num_vic; irq++) - vic_init(VA_VIC(irq), VIC_BASE(irq), vic[irq], 0); -#endif - - s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0); - s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1); - s3c_init_vic_timer_irq(IRQ_TIMER2_VIC, IRQ_TIMER2); - s3c_init_vic_timer_irq(IRQ_TIMER3_VIC, IRQ_TIMER3); - s3c_init_vic_timer_irq(IRQ_TIMER4_VIC, IRQ_TIMER4); - - s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs)); -} diff --git a/arch/arm/plat-s5p/pm.c b/arch/arm/plat-s5p/pm.c deleted file mode 100644 index d592b6304b4..00000000000 --- a/arch/arm/plat-s5p/pm.c +++ /dev/null @@ -1,52 +0,0 @@ -/* linux/arch/arm/plat-s5p/pm.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P Power Manager (Suspend-To-RAM) support - * - * Based on arch/arm/plat-s3c24xx/pm.c - * Copyright (c) 2004,2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/suspend.h> -#include <plat/pm.h> - -#define PFX "s5p pm: " - -/* s3c_pm_check_resume_pin - * - * check to see if the pin is configured correctly for sleep mode, and - * make any necessary adjustments if it is not -*/ - -static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs) -{ - /* nothing here yet */ -} - -/* s3c_pm_configure_extint - * - * configure all external interrupt pins -*/ - -void s3c_pm_configure_extint(void) -{ - /* nothing here yet */ -} - -void s3c_pm_restore_core(void) -{ - /* nothing here yet */ -} - -void s3c_pm_save_core(void) -{ - /* nothing here yet */ -} - diff --git a/arch/arm/plat-s5p/s5p-time.c b/arch/arm/plat-s5p/s5p-time.c deleted file mode 100644 index 8090403eec0..00000000000 --- a/arch/arm/plat-s5p/s5p-time.c +++ /dev/null @@ -1,448 +0,0 @@ -/* linux/arch/arm/plat-s5p/s5p-time.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P - Common hr-timer support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/clockchips.h> -#include <linux/platform_device.h> - -#include <asm/smp_twd.h> -#include <asm/mach/time.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/sched_clock.h> - -#include <mach/map.h> -#include <plat/devs.h> -#include <plat/regs-timer.h> -#include <plat/s5p-time.h> - -static struct clk *tin_event; -static struct clk *tin_source; -static struct clk *tdiv_event; -static struct clk *tdiv_source; -static struct clk *timerclk; -static struct s5p_timer_source timer_source; -static unsigned long clock_count_per_tick; -static void s5p_timer_resume(void); - -static void s5p_time_stop(enum s5p_timer_mode mode) -{ - unsigned long tcon; - - tcon = __raw_readl(S3C2410_TCON); - - switch (mode) { - case S5P_PWM0: - tcon &= ~S3C2410_TCON_T0START; - break; - - case S5P_PWM1: - tcon &= ~S3C2410_TCON_T1START; - break; - - case S5P_PWM2: - tcon &= ~S3C2410_TCON_T2START; - break; - - case S5P_PWM3: - tcon &= ~S3C2410_TCON_T3START; - break; - - case S5P_PWM4: - tcon &= ~S3C2410_TCON_T4START; - break; - - default: - printk(KERN_ERR "Invalid Timer %d\n", mode); - break; - } - __raw_writel(tcon, S3C2410_TCON); -} - -static void s5p_time_setup(enum s5p_timer_mode mode, unsigned long tcnt) -{ - unsigned long tcon; - - tcon = __raw_readl(S3C2410_TCON); - - tcnt--; - - switch (mode) { - case S5P_PWM0: - tcon &= ~(0x0f << 0); - tcon |= S3C2410_TCON_T0MANUALUPD; - break; - - case S5P_PWM1: - tcon &= ~(0x0f << 8); - tcon |= S3C2410_TCON_T1MANUALUPD; - break; - - case S5P_PWM2: - tcon &= ~(0x0f << 12); - tcon |= S3C2410_TCON_T2MANUALUPD; - break; - - case S5P_PWM3: - tcon &= ~(0x0f << 16); - tcon |= S3C2410_TCON_T3MANUALUPD; - break; - - case S5P_PWM4: - tcon &= ~(0x07 << 20); - tcon |= S3C2410_TCON_T4MANUALUPD; - break; - - default: - printk(KERN_ERR "Invalid Timer %d\n", mode); - break; - } - - __raw_writel(tcnt, S3C2410_TCNTB(mode)); - __raw_writel(tcnt, S3C2410_TCMPB(mode)); - __raw_writel(tcon, S3C2410_TCON); -} - -static void s5p_time_start(enum s5p_timer_mode mode, bool periodic) -{ - unsigned long tcon; - - tcon = __raw_readl(S3C2410_TCON); - - switch (mode) { - case S5P_PWM0: - tcon |= S3C2410_TCON_T0START; - tcon &= ~S3C2410_TCON_T0MANUALUPD; - - if (periodic) - tcon |= S3C2410_TCON_T0RELOAD; - else - tcon &= ~S3C2410_TCON_T0RELOAD; - break; - - case S5P_PWM1: - tcon |= S3C2410_TCON_T1START; - tcon &= ~S3C2410_TCON_T1MANUALUPD; - - if (periodic) - tcon |= S3C2410_TCON_T1RELOAD; - else - tcon &= ~S3C2410_TCON_T1RELOAD; - break; - - case S5P_PWM2: - tcon |= S3C2410_TCON_T2START; - tcon &= ~S3C2410_TCON_T2MANUALUPD; - - if (periodic) - tcon |= S3C2410_TCON_T2RELOAD; - else - tcon &= ~S3C2410_TCON_T2RELOAD; - break; - - case S5P_PWM3: - tcon |= S3C2410_TCON_T3START; - tcon &= ~S3C2410_TCON_T3MANUALUPD; - - if (periodic) - tcon |= S3C2410_TCON_T3RELOAD; - else - tcon &= ~S3C2410_TCON_T3RELOAD; - break; - - case S5P_PWM4: - tcon |= S3C2410_TCON_T4START; - tcon &= ~S3C2410_TCON_T4MANUALUPD; - - if (periodic) - tcon |= S3C2410_TCON_T4RELOAD; - else - tcon &= ~S3C2410_TCON_T4RELOAD; - break; - - default: - printk(KERN_ERR "Invalid Timer %d\n", mode); - break; - } - __raw_writel(tcon, S3C2410_TCON); -} - -static int s5p_set_next_event(unsigned long cycles, - struct clock_event_device *evt) -{ - s5p_time_setup(timer_source.event_id, cycles); - s5p_time_start(timer_source.event_id, NON_PERIODIC); - - return 0; -} - -static void s5p_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - s5p_time_stop(timer_source.event_id); - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - s5p_time_setup(timer_source.event_id, clock_count_per_tick); - s5p_time_start(timer_source.event_id, PERIODIC); - break; - - case CLOCK_EVT_MODE_ONESHOT: - break; - - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - break; - - case CLOCK_EVT_MODE_RESUME: - s5p_timer_resume(); - break; - } -} - -static void s5p_timer_resume(void) -{ - /* event timer restart */ - s5p_time_setup(timer_source.event_id, clock_count_per_tick); - s5p_time_start(timer_source.event_id, PERIODIC); - - /* source timer restart */ - s5p_time_setup(timer_source.source_id, TCNT_MAX); - s5p_time_start(timer_source.source_id, PERIODIC); -} - -void __init s5p_set_timer_source(enum s5p_timer_mode event, - enum s5p_timer_mode source) -{ - s3c_device_timer[event].dev.bus = &platform_bus_type; - s3c_device_timer[source].dev.bus = &platform_bus_type; - - timer_source.event_id = event; - timer_source.source_id = source; -} - -static struct clock_event_device time_event_device = { - .name = "s5p_event_timer", - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .rating = 200, - .set_next_event = s5p_set_next_event, - .set_mode = s5p_set_mode, -}; - -static irqreturn_t s5p_clock_event_isr(int irq, void *dev_id) -{ - struct clock_event_device *evt = dev_id; - - evt->event_handler(evt); - - return IRQ_HANDLED; -} - -static struct irqaction s5p_clock_event_irq = { - .name = "s5p_time_irq", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = s5p_clock_event_isr, - .dev_id = &time_event_device, -}; - -static void __init s5p_clockevent_init(void) -{ - unsigned long pclk; - unsigned long clock_rate; - unsigned int irq_number; - struct clk *tscaler; - - pclk = clk_get_rate(timerclk); - - tscaler = clk_get_parent(tdiv_event); - - clk_set_rate(tscaler, pclk / 2); - clk_set_rate(tdiv_event, pclk / 2); - clk_set_parent(tin_event, tdiv_event); - - clock_rate = clk_get_rate(tin_event); - clock_count_per_tick = clock_rate / HZ; - - clockevents_calc_mult_shift(&time_event_device, - clock_rate, S5PTIMER_MIN_RANGE); - time_event_device.max_delta_ns = - clockevent_delta2ns(-1, &time_event_device); - time_event_device.min_delta_ns = - clockevent_delta2ns(1, &time_event_device); - - time_event_device.cpumask = cpumask_of(0); - clockevents_register_device(&time_event_device); - - irq_number = timer_source.event_id + IRQ_TIMER0; - setup_irq(irq_number, &s5p_clock_event_irq); -} - -static cycle_t s5p_timer_read(struct clocksource *cs) -{ - unsigned long offset = 0; - - switch (timer_source.source_id) { - case S5P_PWM0: - case S5P_PWM1: - case S5P_PWM2: - case S5P_PWM3: - offset = (timer_source.source_id * 0x0c) + 0x14; - break; - - case S5P_PWM4: - offset = 0x40; - break; - - default: - printk(KERN_ERR "Invalid Timer %d\n", timer_source.source_id); - return 0; - } - - return (cycle_t) ~__raw_readl(S3C_TIMERREG(offset)); -} - -/* - * Override the global weak sched_clock symbol with this - * local implementation which uses the clocksource to get some - * better resolution when scheduling the kernel. We accept that - * this wraps around for now, since it is just a relative time - * stamp. (Inspired by U300 implementation.) - */ -static DEFINE_CLOCK_DATA(cd); - -unsigned long long notrace sched_clock(void) -{ - u32 cyc; - unsigned long offset = 0; - - switch (timer_source.source_id) { - case S5P_PWM0: - case S5P_PWM1: - case S5P_PWM2: - case S5P_PWM3: - offset = (timer_source.source_id * 0x0c) + 0x14; - break; - - case S5P_PWM4: - offset = 0x40; - break; - - default: - printk(KERN_ERR "Invalid Timer %d\n", timer_source.source_id); - return 0; - } - - cyc = ~__raw_readl(S3C_TIMERREG(offset)); - return cyc_to_sched_clock(&cd, cyc, (u32)~0); -} - -static void notrace s5p_update_sched_clock(void) -{ - u32 cyc; - unsigned long offset = 0; - - switch (timer_source.source_id) { - case S5P_PWM0: - case S5P_PWM1: - case S5P_PWM2: - case S5P_PWM3: - offset = (timer_source.source_id * 0x0c) + 0x14; - break; - - case S5P_PWM4: - offset = 0x40; - break; - - default: - printk(KERN_ERR "Invalid Timer %d\n", timer_source.source_id); - } - - cyc = ~__raw_readl(S3C_TIMERREG(offset)); - update_sched_clock(&cd, cyc, (u32)~0); -} - -struct clocksource time_clocksource = { - .name = "s5p_clocksource_timer", - .rating = 250, - .read = s5p_timer_read, - .mask = CLOCKSOURCE_MASK(32), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static void __init s5p_clocksource_init(void) -{ - unsigned long pclk; - unsigned long clock_rate; - - pclk = clk_get_rate(timerclk); - - clk_set_rate(tdiv_source, pclk / 2); - clk_set_parent(tin_source, tdiv_source); - - clock_rate = clk_get_rate(tin_source); - - init_sched_clock(&cd, s5p_update_sched_clock, 32, clock_rate); - - s5p_time_setup(timer_source.source_id, TCNT_MAX); - s5p_time_start(timer_source.source_id, PERIODIC); - - if (clocksource_register_hz(&time_clocksource, clock_rate)) - panic("%s: can't register clocksource\n", time_clocksource.name); -} - -static void __init s5p_timer_resources(void) -{ - - unsigned long event_id = timer_source.event_id; - unsigned long source_id = timer_source.source_id; - - timerclk = clk_get(NULL, "timers"); - if (IS_ERR(timerclk)) - panic("failed to get timers clock for timer"); - - clk_enable(timerclk); - - tin_event = clk_get(&s3c_device_timer[event_id].dev, "pwm-tin"); - if (IS_ERR(tin_event)) - panic("failed to get pwm-tin clock for event timer"); - - tdiv_event = clk_get(&s3c_device_timer[event_id].dev, "pwm-tdiv"); - if (IS_ERR(tdiv_event)) - panic("failed to get pwm-tdiv clock for event timer"); - - clk_enable(tin_event); - - tin_source = clk_get(&s3c_device_timer[source_id].dev, "pwm-tin"); - if (IS_ERR(tin_source)) - panic("failed to get pwm-tin clock for source timer"); - - tdiv_source = clk_get(&s3c_device_timer[source_id].dev, "pwm-tdiv"); - if (IS_ERR(tdiv_source)) - panic("failed to get pwm-tdiv clock for source timer"); - - clk_enable(tin_source); -} - -static void __init s5p_timer_init(void) -{ - s5p_timer_resources(); - s5p_clockevent_init(); - s5p_clocksource_init(); -} - -struct sys_timer s5p_timer = { - .init = s5p_timer_init, -}; diff --git a/arch/arm/plat-s5p/setup-mipiphy.c b/arch/arm/plat-s5p/setup-mipiphy.c deleted file mode 100644 index 683c466c0e6..00000000000 --- a/arch/arm/plat-s5p/setup-mipiphy.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Copyright (C) 2011 Samsung Electronics Co., Ltd. - * - * S5P - Helper functions for MIPI-CSIS and MIPI-DSIM D-PHY control - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/spinlock.h> -#include <mach/regs-clock.h> - -static int __s5p_mipi_phy_control(struct platform_device *pdev, - bool on, u32 reset) -{ - static DEFINE_SPINLOCK(lock); - void __iomem *addr; - unsigned long flags; - int pid; - u32 cfg; - - if (!pdev) - return -EINVAL; - - pid = (pdev->id == -1) ? 0 : pdev->id; - - if (pid != 0 && pid != 1) - return -EINVAL; - - addr = S5P_MIPI_DPHY_CONTROL(pid); - - spin_lock_irqsave(&lock, flags); - - cfg = __raw_readl(addr); - cfg = on ? (cfg | reset) : (cfg & ~reset); - __raw_writel(cfg, addr); - - if (on) { - cfg |= S5P_MIPI_DPHY_ENABLE; - } else if (!(cfg & (S5P_MIPI_DPHY_SRESETN | - S5P_MIPI_DPHY_MRESETN) & ~reset)) { - cfg &= ~S5P_MIPI_DPHY_ENABLE; - } - - __raw_writel(cfg, addr); - spin_unlock_irqrestore(&lock, flags); - - return 0; -} - -int s5p_csis_phy_enable(struct platform_device *pdev, bool on) -{ - return __s5p_mipi_phy_control(pdev, on, S5P_MIPI_DPHY_SRESETN); -} - -int s5p_dsim_phy_enable(struct platform_device *pdev, bool on) -{ - return __s5p_mipi_phy_control(pdev, on, S5P_MIPI_DPHY_MRESETN); -} diff --git a/arch/arm/plat-s5p/sysmmu.c b/arch/arm/plat-s5p/sysmmu.c deleted file mode 100644 index 54f5eddc921..00000000000 --- a/arch/arm/plat-s5p/sysmmu.c +++ /dev/null @@ -1,312 +0,0 @@ -/* linux/arch/arm/plat-s5p/sysmmu.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/io.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> - -#include <asm/pgtable.h> - -#include <mach/map.h> -#include <mach/regs-sysmmu.h> -#include <plat/sysmmu.h> - -#define CTRL_ENABLE 0x5 -#define CTRL_BLOCK 0x7 -#define CTRL_DISABLE 0x0 - -static struct device *dev; - -static unsigned short fault_reg_offset[SYSMMU_FAULTS_NUM] = { - S5P_PAGE_FAULT_ADDR, - S5P_AR_FAULT_ADDR, - S5P_AW_FAULT_ADDR, - S5P_DEFAULT_SLAVE_ADDR, - S5P_AR_FAULT_ADDR, - S5P_AR_FAULT_ADDR, - S5P_AW_FAULT_ADDR, - S5P_AW_FAULT_ADDR -}; - -static char *sysmmu_fault_name[SYSMMU_FAULTS_NUM] = { - "PAGE FAULT", - "AR MULTI-HIT FAULT", - "AW MULTI-HIT FAULT", - "BUS ERROR", - "AR SECURITY PROTECTION FAULT", - "AR ACCESS PROTECTION FAULT", - "AW SECURITY PROTECTION FAULT", - "AW ACCESS PROTECTION FAULT" -}; - -static int (*fault_handlers[S5P_SYSMMU_TOTAL_IPNUM])( - enum S5P_SYSMMU_INTERRUPT_TYPE itype, - unsigned long pgtable_base, - unsigned long fault_addr); - -/* - * If adjacent 2 bits are true, the system MMU is enabled. - * The system MMU is disabled, otherwise. - */ -static unsigned long sysmmu_states; - -static inline void set_sysmmu_active(sysmmu_ips ips) -{ - sysmmu_states |= 3 << (ips * 2); -} - -static inline void set_sysmmu_inactive(sysmmu_ips ips) -{ - sysmmu_states &= ~(3 << (ips * 2)); -} - -static inline int is_sysmmu_active(sysmmu_ips ips) -{ - return sysmmu_states & (3 << (ips * 2)); -} - -static void __iomem *sysmmusfrs[S5P_SYSMMU_TOTAL_IPNUM]; - -static inline void sysmmu_block(sysmmu_ips ips) -{ - __raw_writel(CTRL_BLOCK, sysmmusfrs[ips] + S5P_MMU_CTRL); - dev_dbg(dev, "%s is blocked.\n", sysmmu_ips_name[ips]); -} - -static inline void sysmmu_unblock(sysmmu_ips ips) -{ - __raw_writel(CTRL_ENABLE, sysmmusfrs[ips] + S5P_MMU_CTRL); - dev_dbg(dev, "%s is unblocked.\n", sysmmu_ips_name[ips]); -} - -static inline void __sysmmu_tlb_invalidate(sysmmu_ips ips) -{ - __raw_writel(0x1, sysmmusfrs[ips] + S5P_MMU_FLUSH); - dev_dbg(dev, "TLB of %s is invalidated.\n", sysmmu_ips_name[ips]); -} - -static inline void __sysmmu_set_ptbase(sysmmu_ips ips, unsigned long pgd) -{ - if (unlikely(pgd == 0)) { - pgd = (unsigned long)ZERO_PAGE(0); - __raw_writel(0x20, sysmmusfrs[ips] + S5P_MMU_CFG); /* 4KB LV1 */ - } else { - __raw_writel(0x0, sysmmusfrs[ips] + S5P_MMU_CFG); /* 16KB LV1 */ - } - - __raw_writel(pgd, sysmmusfrs[ips] + S5P_PT_BASE_ADDR); - - dev_dbg(dev, "Page table base of %s is initialized with 0x%08lX.\n", - sysmmu_ips_name[ips], pgd); - __sysmmu_tlb_invalidate(ips); -} - -void sysmmu_set_fault_handler(sysmmu_ips ips, - int (*handler)(enum S5P_SYSMMU_INTERRUPT_TYPE itype, - unsigned long pgtable_base, - unsigned long fault_addr)) -{ - BUG_ON(!((ips >= SYSMMU_MDMA) && (ips < S5P_SYSMMU_TOTAL_IPNUM))); - fault_handlers[ips] = handler; -} - -static irqreturn_t s5p_sysmmu_irq(int irq, void *dev_id) -{ - /* SYSMMU is in blocked when interrupt occurred. */ - unsigned long base = 0; - sysmmu_ips ips = (sysmmu_ips)dev_id; - enum S5P_SYSMMU_INTERRUPT_TYPE itype; - - itype = (enum S5P_SYSMMU_INTERRUPT_TYPE) - __ffs(__raw_readl(sysmmusfrs[ips] + S5P_INT_STATUS)); - - BUG_ON(!((itype >= 0) && (itype < 8))); - - dev_alert(dev, "%s occurred by %s.\n", sysmmu_fault_name[itype], - sysmmu_ips_name[ips]); - - if (fault_handlers[ips]) { - unsigned long addr; - - base = __raw_readl(sysmmusfrs[ips] + S5P_PT_BASE_ADDR); - addr = __raw_readl(sysmmusfrs[ips] + fault_reg_offset[itype]); - - if (fault_handlers[ips](itype, base, addr)) { - __raw_writel(1 << itype, - sysmmusfrs[ips] + S5P_INT_CLEAR); - dev_notice(dev, "%s from %s is resolved." - " Retrying translation.\n", - sysmmu_fault_name[itype], sysmmu_ips_name[ips]); - } else { - base = 0; - } - } - - sysmmu_unblock(ips); - - if (!base) - dev_notice(dev, "%s from %s is not handled.\n", - sysmmu_fault_name[itype], sysmmu_ips_name[ips]); - - return IRQ_HANDLED; -} - -void s5p_sysmmu_set_tablebase_pgd(sysmmu_ips ips, unsigned long pgd) -{ - if (is_sysmmu_active(ips)) { - sysmmu_block(ips); - __sysmmu_set_ptbase(ips, pgd); - sysmmu_unblock(ips); - } else { - dev_dbg(dev, "%s is disabled. " - "Skipping initializing page table base.\n", - sysmmu_ips_name[ips]); - } -} - -void s5p_sysmmu_enable(sysmmu_ips ips, unsigned long pgd) -{ - if (!is_sysmmu_active(ips)) { - sysmmu_clk_enable(ips); - - __sysmmu_set_ptbase(ips, pgd); - - __raw_writel(CTRL_ENABLE, sysmmusfrs[ips] + S5P_MMU_CTRL); - - set_sysmmu_active(ips); - dev_dbg(dev, "%s is enabled.\n", sysmmu_ips_name[ips]); - } else { - dev_dbg(dev, "%s is already enabled.\n", sysmmu_ips_name[ips]); - } -} - -void s5p_sysmmu_disable(sysmmu_ips ips) -{ - if (is_sysmmu_active(ips)) { - __raw_writel(CTRL_DISABLE, sysmmusfrs[ips] + S5P_MMU_CTRL); - set_sysmmu_inactive(ips); - sysmmu_clk_disable(ips); - dev_dbg(dev, "%s is disabled.\n", sysmmu_ips_name[ips]); - } else { - dev_dbg(dev, "%s is already disabled.\n", sysmmu_ips_name[ips]); - } -} - -void s5p_sysmmu_tlb_invalidate(sysmmu_ips ips) -{ - if (is_sysmmu_active(ips)) { - sysmmu_block(ips); - __sysmmu_tlb_invalidate(ips); - sysmmu_unblock(ips); - } else { - dev_dbg(dev, "%s is disabled. " - "Skipping invalidating TLB.\n", sysmmu_ips_name[ips]); - } -} - -static int s5p_sysmmu_probe(struct platform_device *pdev) -{ - int i, ret; - struct resource *res, *mem; - - dev = &pdev->dev; - - for (i = 0; i < S5P_SYSMMU_TOTAL_IPNUM; i++) { - int irq; - - sysmmu_clk_init(dev, i); - sysmmu_clk_disable(i); - - res = platform_get_resource(pdev, IORESOURCE_MEM, i); - if (!res) { - dev_err(dev, "Failed to get the resource of %s.\n", - sysmmu_ips_name[i]); - ret = -ENODEV; - goto err_res; - } - - mem = request_mem_region(res->start, - ((res->end) - (res->start)) + 1, pdev->name); - if (!mem) { - dev_err(dev, "Failed to request the memory region of %s.\n", - sysmmu_ips_name[i]); - ret = -EBUSY; - goto err_res; - } - - sysmmusfrs[i] = ioremap(res->start, res->end - res->start + 1); - if (!sysmmusfrs[i]) { - dev_err(dev, "Failed to ioremap() for %s.\n", - sysmmu_ips_name[i]); - ret = -ENXIO; - goto err_reg; - } - - irq = platform_get_irq(pdev, i); - if (irq <= 0) { - dev_err(dev, "Failed to get the IRQ resource of %s.\n", - sysmmu_ips_name[i]); - ret = -ENOENT; - goto err_map; - } - - if (request_irq(irq, s5p_sysmmu_irq, IRQF_DISABLED, - pdev->name, (void *)i)) { - dev_err(dev, "Failed to request IRQ for %s.\n", - sysmmu_ips_name[i]); - ret = -ENOENT; - goto err_map; - } - } - - return 0; - -err_map: - iounmap(sysmmusfrs[i]); -err_reg: - release_mem_region(mem->start, resource_size(mem)); -err_res: - return ret; -} - -static int s5p_sysmmu_remove(struct platform_device *pdev) -{ - return 0; -} -int s5p_sysmmu_runtime_suspend(struct device *dev) -{ - return 0; -} - -int s5p_sysmmu_runtime_resume(struct device *dev) -{ - return 0; -} - -const struct dev_pm_ops s5p_sysmmu_pm_ops = { - .runtime_suspend = s5p_sysmmu_runtime_suspend, - .runtime_resume = s5p_sysmmu_runtime_resume, -}; - -static struct platform_driver s5p_sysmmu_driver = { - .probe = s5p_sysmmu_probe, - .remove = s5p_sysmmu_remove, - .driver = { - .owner = THIS_MODULE, - .name = "s5p-sysmmu", - .pm = &s5p_sysmmu_pm_ops, - } -}; - -static int __init s5p_sysmmu_init(void) -{ - return platform_driver_register(&s5p_sysmmu_driver); -} -arch_initcall(s5p_sysmmu_init); |