diff options
Diffstat (limited to 'arch/arm/plat-pxa/include')
| -rw-r--r-- | arch/arm/plat-pxa/include/plat/gpio-pxa.h | 44 | ||||
| -rw-r--r-- | arch/arm/plat-pxa/include/plat/gpio.h | 30 | ||||
| -rw-r--r-- | arch/arm/plat-pxa/include/plat/mfp.h | 4 | ||||
| -rw-r--r-- | arch/arm/plat-pxa/include/plat/pxa27x_keypad.h | 69 | ||||
| -rw-r--r-- | arch/arm/plat-pxa/include/plat/pxa3xx_nand.h | 79 |
5 files changed, 2 insertions, 224 deletions
diff --git a/arch/arm/plat-pxa/include/plat/gpio-pxa.h b/arch/arm/plat-pxa/include/plat/gpio-pxa.h deleted file mode 100644 index b6390beff32..00000000000 --- a/arch/arm/plat-pxa/include/plat/gpio-pxa.h +++ /dev/null @@ -1,44 +0,0 @@ -#ifndef __PLAT_PXA_GPIO_H -#define __PLAT_PXA_GPIO_H - -struct irq_data; - -/* - * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with - * one set of registers. The register offsets are organized below: - * - * GPLR GPDR GPSR GPCR GRER GFER GEDR - * BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048 - * BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C - * BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050 - * - * BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148 - * BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C - * BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150 - * - * NOTE: - * BANK 3 is only available on PXA27x and later processors. - * BANK 4 and 5 are only available on PXA935 - */ - -#define GPIO_BANK(n) (GPIO_REGS_VIRT + BANK_OFF(n)) - -#define GPLR_OFFSET 0x00 -#define GPDR_OFFSET 0x0C -#define GPSR_OFFSET 0x18 -#define GPCR_OFFSET 0x24 -#define GRER_OFFSET 0x30 -#define GFER_OFFSET 0x3C -#define GEDR_OFFSET 0x48 - -/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85). - * Those cases currently cause holes in the GPIO number space, the - * actual number of the last GPIO is recorded by 'pxa_last_gpio'. - */ -extern int pxa_last_gpio; - -typedef int (*set_wake_t)(struct irq_data *d, unsigned int on); - -extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn); - -#endif /* __PLAT_PXA_GPIO_H */ diff --git a/arch/arm/plat-pxa/include/plat/gpio.h b/arch/arm/plat-pxa/include/plat/gpio.h deleted file mode 100644 index 258f77210b0..00000000000 --- a/arch/arm/plat-pxa/include/plat/gpio.h +++ /dev/null @@ -1,30 +0,0 @@ -#ifndef __PLAT_GPIO_H -#define __PLAT_GPIO_H - -#define __ARM_GPIOLIB_COMPLEX - -/* The individual machine provides register offsets and NR_BUILTIN_GPIO */ -#include <mach/gpio-pxa.h> - -static inline int gpio_get_value(unsigned gpio) -{ - if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) - return GPLR(gpio) & GPIO_bit(gpio); - else - return __gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) { - if (value) - GPSR(gpio) = GPIO_bit(gpio); - else - GPCR(gpio) = GPIO_bit(gpio); - } else - __gpio_set_value(gpio, value); -} - -#define gpio_cansleep __gpio_cansleep - -#endif /* __PLAT_GPIO_H */ diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h index 5c79c29f283..10bc4f3757d 100644 --- a/arch/arm/plat-pxa/include/plat/mfp.h +++ b/arch/arm/plat-pxa/include/plat/mfp.h @@ -423,7 +423,7 @@ typedef unsigned long mfp_cfg_t; ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\ (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm)) -#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x) || defined(CONFIG_ARCH_MMP) +#if defined(CONFIG_PXA3xx) || defined(CONFIG_ARCH_MMP) /* * each MFP pin will have a MFPR register, since the offset of the * register varies between processors, the processor specific code @@ -470,6 +470,6 @@ void mfp_write(int mfp, unsigned long mfpr_val); void mfp_config(unsigned long *mfp_cfgs, int num); void mfp_config_run(void); void mfp_config_lpm(void); -#endif /* CONFIG_PXA3xx || CONFIG_PXA95x || CONFIG_ARCH_MMP */ +#endif /* CONFIG_PXA3xx || CONFIG_ARCH_MMP */ #endif /* __ASM_PLAT_MFP_H */ diff --git a/arch/arm/plat-pxa/include/plat/pxa27x_keypad.h b/arch/arm/plat-pxa/include/plat/pxa27x_keypad.h deleted file mode 100644 index abcc36eb124..00000000000 --- a/arch/arm/plat-pxa/include/plat/pxa27x_keypad.h +++ /dev/null @@ -1,69 +0,0 @@ -#ifndef __ASM_ARCH_PXA27x_KEYPAD_H -#define __ASM_ARCH_PXA27x_KEYPAD_H - -#include <linux/input.h> -#include <linux/input/matrix_keypad.h> - -#define MAX_MATRIX_KEY_ROWS (8) -#define MAX_MATRIX_KEY_COLS (8) -#define MATRIX_ROW_SHIFT (3) -#define MAX_DIRECT_KEY_NUM (8) - -/* pxa3xx keypad platform specific parameters - * - * NOTE: - * 1. direct_key_num indicates the number of keys in the direct keypad - * _plus_ the number of rotary-encoder sensor inputs, this can be - * left as 0 if only rotary encoders are enabled, the driver will - * automatically calculate this - * - * 2. direct_key_map is the key code map for the direct keys, if rotary - * encoder(s) are enabled, direct key 0/1(2/3) will be ignored - * - * 3. rotary can be either interpreted as a relative input event (e.g. - * REL_WHEEL/REL_HWHEEL) or specific keys (e.g. UP/DOWN/LEFT/RIGHT) - * - * 4. matrix key and direct key will use the same debounce_interval by - * default, which should be sufficient in most cases - * - * pxa168 keypad platform specific parameter - * - * NOTE: - * clear_wakeup_event callback is a workaround required to clear the - * keypad interrupt. The keypad wake must be cleared in addition to - * reading the MI/DI bits in the KPC register. - */ -struct pxa27x_keypad_platform_data { - - /* code map for the matrix keys */ - unsigned int matrix_key_rows; - unsigned int matrix_key_cols; - unsigned int *matrix_key_map; - int matrix_key_map_size; - - /* direct keys */ - int direct_key_num; - unsigned int direct_key_map[MAX_DIRECT_KEY_NUM]; - - /* rotary encoders 0 */ - int enable_rotary0; - int rotary0_rel_code; - int rotary0_up_key; - int rotary0_down_key; - - /* rotary encoders 1 */ - int enable_rotary1; - int rotary1_rel_code; - int rotary1_up_key; - int rotary1_down_key; - - /* key debounce interval */ - unsigned int debounce_interval; - - /* clear wakeup event requirement for pxa168 */ - void (*clear_wakeup_event)(void); -}; - -extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info); - -#endif /* __ASM_ARCH_PXA27x_KEYPAD_H */ diff --git a/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h b/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h deleted file mode 100644 index c42f39f2019..00000000000 --- a/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h +++ /dev/null @@ -1,79 +0,0 @@ -#ifndef __ASM_ARCH_PXA3XX_NAND_H -#define __ASM_ARCH_PXA3XX_NAND_H - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -struct pxa3xx_nand_timing { - unsigned int tCH; /* Enable signal hold time */ - unsigned int tCS; /* Enable signal setup time */ - unsigned int tWH; /* ND_nWE high duration */ - unsigned int tWP; /* ND_nWE pulse time */ - unsigned int tRH; /* ND_nRE high duration */ - unsigned int tRP; /* ND_nRE pulse width */ - unsigned int tR; /* ND_nWE high to ND_nRE low for read */ - unsigned int tWHR; /* ND_nWE high to ND_nRE low for status read */ - unsigned int tAR; /* ND_ALE low to ND_nRE low delay */ -}; - -struct pxa3xx_nand_cmdset { - uint16_t read1; - uint16_t read2; - uint16_t program; - uint16_t read_status; - uint16_t read_id; - uint16_t erase; - uint16_t reset; - uint16_t lock; - uint16_t unlock; - uint16_t lock_status; -}; - -struct pxa3xx_nand_flash { - char *name; - uint32_t chip_id; - unsigned int page_per_block; /* Pages per block (PG_PER_BLK) */ - unsigned int page_size; /* Page size in bytes (PAGE_SZ) */ - unsigned int flash_width; /* Width of Flash memory (DWIDTH_M) */ - unsigned int dfc_width; /* Width of flash controller(DWIDTH_C) */ - unsigned int num_blocks; /* Number of physical blocks in Flash */ - - struct pxa3xx_nand_timing *timing; /* NAND Flash timing */ -}; - -/* - * Current pxa3xx_nand controller has two chip select which - * both be workable. - * - * Notice should be taken that: - * When you want to use this feature, you should not enable the - * keep configuration feature, for two chip select could be - * attached with different nand chip. The different page size - * and timing requirement make the keep configuration impossible. - */ - -/* The max num of chip select current support */ -#define NUM_CHIP_SELECT (2) -struct pxa3xx_nand_platform_data { - - /* the data flash bus is shared between the Static Memory - * Controller and the Data Flash Controller, the arbiter - * controls the ownership of the bus - */ - int enable_arbiter; - - /* allow platform code to keep OBM/bootloader defined NFC config */ - int keep_config; - - /* indicate how many chip selects will be used */ - int num_cs; - - const struct mtd_partition *parts[NUM_CHIP_SELECT]; - unsigned int nr_parts[NUM_CHIP_SELECT]; - - const struct pxa3xx_nand_flash * flash; - size_t num_flash; -}; - -extern void pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info); -#endif /* __ASM_ARCH_PXA3XX_NAND_H */ |