diff options
Diffstat (limited to 'arch/arm/plat-omap/gpio.c')
| -rw-r--r-- | arch/arm/plat-omap/gpio.c | 2346 |
1 files changed, 0 insertions, 2346 deletions
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c deleted file mode 100644 index c05c653d167..00000000000 --- a/arch/arm/plat-omap/gpio.c +++ /dev/null @@ -1,2346 +0,0 @@ -/* - * linux/arch/arm/plat-omap/gpio.c - * - * Support functions for OMAP GPIO - * - * Copyright (C) 2003-2005 Nokia Corporation - * Written by Juha Yrjölä <juha.yrjola@nokia.com> - * - * Copyright (C) 2009 Texas Instruments - * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/sysdev.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/irq.h> -#include <mach/irqs.h> -#include <mach/gpio.h> -#include <asm/mach/irq.h> -#include <plat/powerdomain.h> - -/* - * OMAP1510 GPIO registers - */ -#define OMAP1510_GPIO_BASE 0xfffce000 -#define OMAP1510_GPIO_DATA_INPUT 0x00 -#define OMAP1510_GPIO_DATA_OUTPUT 0x04 -#define OMAP1510_GPIO_DIR_CONTROL 0x08 -#define OMAP1510_GPIO_INT_CONTROL 0x0c -#define OMAP1510_GPIO_INT_MASK 0x10 -#define OMAP1510_GPIO_INT_STATUS 0x14 -#define OMAP1510_GPIO_PIN_CONTROL 0x18 - -#define OMAP1510_IH_GPIO_BASE 64 - -/* - * OMAP1610 specific GPIO registers - */ -#define OMAP1610_GPIO1_BASE 0xfffbe400 -#define OMAP1610_GPIO2_BASE 0xfffbec00 -#define OMAP1610_GPIO3_BASE 0xfffbb400 -#define OMAP1610_GPIO4_BASE 0xfffbbc00 -#define OMAP1610_GPIO_REVISION 0x0000 -#define OMAP1610_GPIO_SYSCONFIG 0x0010 -#define OMAP1610_GPIO_SYSSTATUS 0x0014 -#define OMAP1610_GPIO_IRQSTATUS1 0x0018 -#define OMAP1610_GPIO_IRQENABLE1 0x001c -#define OMAP1610_GPIO_WAKEUPENABLE 0x0028 -#define OMAP1610_GPIO_DATAIN 0x002c -#define OMAP1610_GPIO_DATAOUT 0x0030 -#define OMAP1610_GPIO_DIRECTION 0x0034 -#define OMAP1610_GPIO_EDGE_CTRL1 0x0038 -#define OMAP1610_GPIO_EDGE_CTRL2 0x003c -#define OMAP1610_GPIO_CLEAR_IRQENABLE1 0x009c -#define OMAP1610_GPIO_CLEAR_WAKEUPENA 0x00a8 -#define OMAP1610_GPIO_CLEAR_DATAOUT 0x00b0 -#define OMAP1610_GPIO_SET_IRQENABLE1 0x00dc -#define OMAP1610_GPIO_SET_WAKEUPENA 0x00e8 -#define OMAP1610_GPIO_SET_DATAOUT 0x00f0 - -/* - * OMAP7XX specific GPIO registers - */ -#define OMAP7XX_GPIO1_BASE 0xfffbc000 -#define OMAP7XX_GPIO2_BASE 0xfffbc800 -#define OMAP7XX_GPIO3_BASE 0xfffbd000 -#define OMAP7XX_GPIO4_BASE 0xfffbd800 -#define OMAP7XX_GPIO5_BASE 0xfffbe000 -#define OMAP7XX_GPIO6_BASE 0xfffbe800 -#define OMAP7XX_GPIO_DATA_INPUT 0x00 -#define OMAP7XX_GPIO_DATA_OUTPUT 0x04 -#define OMAP7XX_GPIO_DIR_CONTROL 0x08 -#define OMAP7XX_GPIO_INT_CONTROL 0x0c -#define OMAP7XX_GPIO_INT_MASK 0x10 -#define OMAP7XX_GPIO_INT_STATUS 0x14 - -#define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE - -/* - * omap24xx specific GPIO registers - */ -#define OMAP242X_GPIO1_BASE 0x48018000 -#define OMAP242X_GPIO2_BASE 0x4801a000 -#define OMAP242X_GPIO3_BASE 0x4801c000 -#define OMAP242X_GPIO4_BASE 0x4801e000 - -#define OMAP243X_GPIO1_BASE 0x4900C000 -#define OMAP243X_GPIO2_BASE 0x4900E000 -#define OMAP243X_GPIO3_BASE 0x49010000 -#define OMAP243X_GPIO4_BASE 0x49012000 -#define OMAP243X_GPIO5_BASE 0x480B6000 - -#define OMAP24XX_GPIO_REVISION 0x0000 -#define OMAP24XX_GPIO_SYSCONFIG 0x0010 -#define OMAP24XX_GPIO_SYSSTATUS 0x0014 -#define OMAP24XX_GPIO_IRQSTATUS1 0x0018 -#define OMAP24XX_GPIO_IRQSTATUS2 0x0028 -#define OMAP24XX_GPIO_IRQENABLE2 0x002c -#define OMAP24XX_GPIO_IRQENABLE1 0x001c -#define OMAP24XX_GPIO_WAKE_EN 0x0020 -#define OMAP24XX_GPIO_CTRL 0x0030 -#define OMAP24XX_GPIO_OE 0x0034 -#define OMAP24XX_GPIO_DATAIN 0x0038 -#define OMAP24XX_GPIO_DATAOUT 0x003c -#define OMAP24XX_GPIO_LEVELDETECT0 0x0040 -#define OMAP24XX_GPIO_LEVELDETECT1 0x0044 -#define OMAP24XX_GPIO_RISINGDETECT 0x0048 -#define OMAP24XX_GPIO_FALLINGDETECT 0x004c -#define OMAP24XX_GPIO_DEBOUNCE_EN 0x0050 -#define OMAP24XX_GPIO_DEBOUNCE_VAL 0x0054 -#define OMAP24XX_GPIO_CLEARIRQENABLE1 0x0060 -#define OMAP24XX_GPIO_SETIRQENABLE1 0x0064 -#define OMAP24XX_GPIO_CLEARWKUENA 0x0080 -#define OMAP24XX_GPIO_SETWKUENA 0x0084 -#define OMAP24XX_GPIO_CLEARDATAOUT 0x0090 -#define OMAP24XX_GPIO_SETDATAOUT 0x0094 - -#define OMAP4_GPIO_REVISION 0x0000 -#define OMAP4_GPIO_SYSCONFIG 0x0010 -#define OMAP4_GPIO_EOI 0x0020 -#define OMAP4_GPIO_IRQSTATUSRAW0 0x0024 -#define OMAP4_GPIO_IRQSTATUSRAW1 0x0028 -#define OMAP4_GPIO_IRQSTATUS0 0x002c -#define OMAP4_GPIO_IRQSTATUS1 0x0030 -#define OMAP4_GPIO_IRQSTATUSSET0 0x0034 -#define OMAP4_GPIO_IRQSTATUSSET1 0x0038 -#define OMAP4_GPIO_IRQSTATUSCLR0 0x003c -#define OMAP4_GPIO_IRQSTATUSCLR1 0x0040 -#define OMAP4_GPIO_IRQWAKEN0 0x0044 -#define OMAP4_GPIO_IRQWAKEN1 0x0048 -#define OMAP4_GPIO_SYSSTATUS 0x0114 -#define OMAP4_GPIO_IRQENABLE1 0x011c -#define OMAP4_GPIO_WAKE_EN 0x0120 -#define OMAP4_GPIO_IRQSTATUS2 0x0128 -#define OMAP4_GPIO_IRQENABLE2 0x012c -#define OMAP4_GPIO_CTRL 0x0130 -#define OMAP4_GPIO_OE 0x0134 -#define OMAP4_GPIO_DATAIN 0x0138 -#define OMAP4_GPIO_DATAOUT 0x013c -#define OMAP4_GPIO_LEVELDETECT0 0x0140 -#define OMAP4_GPIO_LEVELDETECT1 0x0144 -#define OMAP4_GPIO_RISINGDETECT 0x0148 -#define OMAP4_GPIO_FALLINGDETECT 0x014c -#define OMAP4_GPIO_DEBOUNCENABLE 0x0150 -#define OMAP4_GPIO_DEBOUNCINGTIME 0x0154 -#define OMAP4_GPIO_CLEARIRQENABLE1 0x0160 -#define OMAP4_GPIO_SETIRQENABLE1 0x0164 -#define OMAP4_GPIO_CLEARWKUENA 0x0180 -#define OMAP4_GPIO_SETWKUENA 0x0184 -#define OMAP4_GPIO_CLEARDATAOUT 0x0190 -#define OMAP4_GPIO_SETDATAOUT 0x0194 -/* - * omap34xx specific GPIO registers - */ - -#define OMAP34XX_GPIO1_BASE 0x48310000 -#define OMAP34XX_GPIO2_BASE 0x49050000 -#define OMAP34XX_GPIO3_BASE 0x49052000 -#define OMAP34XX_GPIO4_BASE 0x49054000 -#define OMAP34XX_GPIO5_BASE 0x49056000 -#define OMAP34XX_GPIO6_BASE 0x49058000 - -/* - * OMAP44XX specific GPIO registers - */ -#define OMAP44XX_GPIO1_BASE 0x4a310000 -#define OMAP44XX_GPIO2_BASE 0x48055000 -#define OMAP44XX_GPIO3_BASE 0x48057000 -#define OMAP44XX_GPIO4_BASE 0x48059000 -#define OMAP44XX_GPIO5_BASE 0x4805B000 -#define OMAP44XX_GPIO6_BASE 0x4805D000 - -struct gpio_bank { - unsigned long pbase; - void __iomem *base; - u16 irq; - u16 virtual_irq_start; - int method; -#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS) - u32 suspend_wakeup; - u32 saved_wakeup; -#endif -#ifdef CONFIG_ARCH_OMAP2PLUS - u32 non_wakeup_gpios; - u32 enabled_non_wakeup_gpios; - - u32 saved_datain; - u32 saved_fallingdetect; - u32 saved_risingdetect; -#endif - u32 level_mask; - u32 toggle_mask; - spinlock_t lock; - struct gpio_chip chip; - struct clk *dbck; - u32 mod_usage; - u32 dbck_enable_mask; -}; - -#define METHOD_MPUIO 0 -#define METHOD_GPIO_1510 1 -#define METHOD_GPIO_1610 2 -#define METHOD_GPIO_7XX 3 -#define METHOD_GPIO_24XX 5 -#define METHOD_GPIO_44XX 6 - -#ifdef CONFIG_ARCH_OMAP16XX -static struct gpio_bank gpio_bank_1610[5] = { - { OMAP1_MPUIO_VBASE, NULL, INT_MPUIO, IH_MPUIO_BASE, - METHOD_MPUIO }, - { OMAP1610_GPIO1_BASE, NULL, INT_GPIO_BANK1, IH_GPIO_BASE, - METHOD_GPIO_1610 }, - { OMAP1610_GPIO2_BASE, NULL, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16, - METHOD_GPIO_1610 }, - { OMAP1610_GPIO3_BASE, NULL, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32, - METHOD_GPIO_1610 }, - { OMAP1610_GPIO4_BASE, NULL, INT_1610_GPIO_BANK4, IH_GPIO_BASE + 48, - METHOD_GPIO_1610 }, -}; -#endif - -#ifdef CONFIG_ARCH_OMAP15XX -static struct gpio_bank gpio_bank_1510[2] = { - { OMAP1_MPUIO_VBASE, NULL, INT_MPUIO, IH_MPUIO_BASE, - METHOD_MPUIO }, - { OMAP1510_GPIO_BASE, NULL, INT_GPIO_BANK1, IH_GPIO_BASE, - METHOD_GPIO_1510 } -}; -#endif - -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) -static struct gpio_bank gpio_bank_7xx[7] = { - { OMAP1_MPUIO_VBASE, NULL, INT_7XX_MPUIO, IH_MPUIO_BASE, - METHOD_MPUIO }, - { OMAP7XX_GPIO1_BASE, NULL, INT_7XX_GPIO_BANK1, IH_GPIO_BASE, - METHOD_GPIO_7XX }, - { OMAP7XX_GPIO2_BASE, NULL, INT_7XX_GPIO_BANK2, IH_GPIO_BASE + 32, - METHOD_GPIO_7XX }, - { OMAP7XX_GPIO3_BASE, NULL, INT_7XX_GPIO_BANK3, IH_GPIO_BASE + 64, - METHOD_GPIO_7XX }, - { OMAP7XX_GPIO4_BASE, NULL, INT_7XX_GPIO_BANK4, IH_GPIO_BASE + 96, - METHOD_GPIO_7XX }, - { OMAP7XX_GPIO5_BASE, NULL, INT_7XX_GPIO_BANK5, IH_GPIO_BASE + 128, - METHOD_GPIO_7XX }, - { OMAP7XX_GPIO6_BASE, NULL, INT_7XX_GPIO_BANK6, IH_GPIO_BASE + 160, - METHOD_GPIO_7XX }, -}; -#endif - -#ifdef CONFIG_ARCH_OMAP2 - -static struct gpio_bank gpio_bank_242x[4] = { - { OMAP242X_GPIO1_BASE, NULL, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, - METHOD_GPIO_24XX }, - { OMAP242X_GPIO2_BASE, NULL, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, - METHOD_GPIO_24XX }, - { OMAP242X_GPIO3_BASE, NULL, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, - METHOD_GPIO_24XX }, - { OMAP242X_GPIO4_BASE, NULL, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, - METHOD_GPIO_24XX }, -}; - -static struct gpio_bank gpio_bank_243x[5] = { - { OMAP243X_GPIO1_BASE, NULL, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, - METHOD_GPIO_24XX }, - { OMAP243X_GPIO2_BASE, NULL, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, - METHOD_GPIO_24XX }, - { OMAP243X_GPIO3_BASE, NULL, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, - METHOD_GPIO_24XX }, - { OMAP243X_GPIO4_BASE, NULL, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, - METHOD_GPIO_24XX }, - { OMAP243X_GPIO5_BASE, NULL, INT_24XX_GPIO_BANK5, IH_GPIO_BASE + 128, - METHOD_GPIO_24XX }, -}; - -#endif - -#ifdef CONFIG_ARCH_OMAP3 -static struct gpio_bank gpio_bank_34xx[6] = { - { OMAP34XX_GPIO1_BASE, NULL, INT_34XX_GPIO_BANK1, IH_GPIO_BASE, - METHOD_GPIO_24XX }, - { OMAP34XX_GPIO2_BASE, NULL, INT_34XX_GPIO_BANK2, IH_GPIO_BASE + 32, - METHOD_GPIO_24XX }, - { OMAP34XX_GPIO3_BASE, NULL, INT_34XX_GPIO_BANK3, IH_GPIO_BASE + 64, - METHOD_GPIO_24XX }, - { OMAP34XX_GPIO4_BASE, NULL, INT_34XX_GPIO_BANK4, IH_GPIO_BASE + 96, - METHOD_GPIO_24XX }, - { OMAP34XX_GPIO5_BASE, NULL, INT_34XX_GPIO_BANK5, IH_GPIO_BASE + 128, - METHOD_GPIO_24XX }, - { OMAP34XX_GPIO6_BASE, NULL, INT_34XX_GPIO_BANK6, IH_GPIO_BASE + 160, - METHOD_GPIO_24XX }, -}; - -struct omap3_gpio_regs { - u32 sysconfig; - u32 irqenable1; - u32 irqenable2; - u32 wake_en; - u32 ctrl; - u32 oe; - u32 leveldetect0; - u32 leveldetect1; - u32 risingdetect; - u32 fallingdetect; - u32 dataout; -}; - -static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS]; -#endif - -#ifdef CONFIG_ARCH_OMAP4 -static struct gpio_bank gpio_bank_44xx[6] = { - { OMAP44XX_GPIO1_BASE, NULL, OMAP44XX_IRQ_GPIO1, IH_GPIO_BASE, - METHOD_GPIO_44XX }, - { OMAP44XX_GPIO2_BASE, NULL, OMAP44XX_IRQ_GPIO2, IH_GPIO_BASE + 32, - METHOD_GPIO_44XX }, - { OMAP44XX_GPIO3_BASE, NULL, OMAP44XX_IRQ_GPIO3, IH_GPIO_BASE + 64, - METHOD_GPIO_44XX }, - { OMAP44XX_GPIO4_BASE, NULL, OMAP44XX_IRQ_GPIO4, IH_GPIO_BASE + 96, - METHOD_GPIO_44XX }, - { OMAP44XX_GPIO5_BASE, NULL, OMAP44XX_IRQ_GPIO5, IH_GPIO_BASE + 128, - METHOD_GPIO_44XX }, - { OMAP44XX_GPIO6_BASE, NULL, OMAP44XX_IRQ_GPIO6, IH_GPIO_BASE + 160, - METHOD_GPIO_44XX }, -}; - -#endif - -static struct gpio_bank *gpio_bank; -static int gpio_bank_count; - -static inline struct gpio_bank *get_gpio_bank(int gpio) -{ - if (cpu_is_omap15xx()) { - if (OMAP_GPIO_IS_MPUIO(gpio)) - return &gpio_bank[0]; - return &gpio_bank[1]; - } - if (cpu_is_omap16xx()) { - if (OMAP_GPIO_IS_MPUIO(gpio)) - return &gpio_bank[0]; - return &gpio_bank[1 + (gpio >> 4)]; - } - if (cpu_is_omap7xx()) { - if (OMAP_GPIO_IS_MPUIO(gpio)) - return &gpio_bank[0]; - return &gpio_bank[1 + (gpio >> 5)]; - } - if (cpu_is_omap24xx()) - return &gpio_bank[gpio >> 5]; - if (cpu_is_omap34xx() || cpu_is_omap44xx()) - return &gpio_bank[gpio >> 5]; - BUG(); - return NULL; -} - -static inline int get_gpio_index(int gpio) -{ - if (cpu_is_omap7xx()) - return gpio & 0x1f; - if (cpu_is_omap24xx()) - return gpio & 0x1f; - if (cpu_is_omap34xx() || cpu_is_omap44xx()) - return gpio & 0x1f; - return gpio & 0x0f; -} - -static inline int gpio_valid(int gpio) -{ - if (gpio < 0) - return -1; - if (cpu_class_is_omap1() && OMAP_GPIO_IS_MPUIO(gpio)) { - if (gpio >= OMAP_MAX_GPIO_LINES + 16) - return -1; - return 0; - } - if (cpu_is_omap15xx() && gpio < 16) - return 0; - if ((cpu_is_omap16xx()) && gpio < 64) - return 0; - if (cpu_is_omap7xx() && gpio < 192) - return 0; - if (cpu_is_omap2420() && gpio < 128) - return 0; - if (cpu_is_omap2430() && gpio < 160) - return 0; - if ((cpu_is_omap34xx() || cpu_is_omap44xx()) && gpio < 192) - return 0; - return -1; -} - -static int check_gpio(int gpio) -{ - if (unlikely(gpio_valid(gpio) < 0)) { - printk(KERN_ERR "omap-gpio: invalid GPIO %d\n", gpio); - dump_stack(); - return -1; - } - return 0; -} - -static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) -{ - void __iomem *reg = bank->base; - u32 l; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - reg += OMAP_MPUIO_IO_CNTL; - break; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_DIR_CONTROL; - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - reg += OMAP1610_GPIO_DIRECTION; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_DIR_CONTROL; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - reg += OMAP24XX_GPIO_OE; - break; -#endif -#if defined(CONFIG_ARCH_OMAP4) - case METHOD_GPIO_44XX: - reg += OMAP4_GPIO_OE; - break; -#endif - default: - WARN_ON(1); - return; - } - l = __raw_readl(reg); - if (is_input) - l |= 1 << gpio; - else - l &= ~(1 << gpio); - __raw_writel(l, reg); -} - -static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) -{ - void __iomem *reg = bank->base; - u32 l = 0; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - reg += OMAP_MPUIO_OUTPUT; - l = __raw_readl(reg); - if (enable) - l |= 1 << gpio; - else - l &= ~(1 << gpio); - break; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_DATA_OUTPUT; - l = __raw_readl(reg); - if (enable) - l |= 1 << gpio; - else - l &= ~(1 << gpio); - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - if (enable) - reg += OMAP1610_GPIO_SET_DATAOUT; - else - reg += OMAP1610_GPIO_CLEAR_DATAOUT; - l = 1 << gpio; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_DATA_OUTPUT; - l = __raw_readl(reg); - if (enable) - l |= 1 << gpio; - else - l &= ~(1 << gpio); - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - if (enable) - reg += OMAP24XX_GPIO_SETDATAOUT; - else - reg += OMAP24XX_GPIO_CLEARDATAOUT; - l = 1 << gpio; - break; -#endif -#ifdef CONFIG_ARCH_OMAP4 - case METHOD_GPIO_44XX: - if (enable) - reg += OMAP4_GPIO_SETDATAOUT; - else - reg += OMAP4_GPIO_CLEARDATAOUT; - l = 1 << gpio; - break; -#endif - default: - WARN_ON(1); - return; - } - __raw_writel(l, reg); -} - -static int _get_gpio_datain(struct gpio_bank *bank, int gpio) -{ - void __iomem *reg; - - if (check_gpio(gpio) < 0) - return -EINVAL; - reg = bank->base; - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - reg += OMAP_MPUIO_INPUT_LATCH; - break; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_DATA_INPUT; - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - reg += OMAP1610_GPIO_DATAIN; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_DATA_INPUT; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - reg += OMAP24XX_GPIO_DATAIN; - break; -#endif -#ifdef CONFIG_ARCH_OMAP4 - case METHOD_GPIO_44XX: - reg += OMAP4_GPIO_DATAIN; - break; -#endif - default: - return -EINVAL; - } - return (__raw_readl(reg) - & (1 << get_gpio_index(gpio))) != 0; -} - -static int _get_gpio_dataout(struct gpio_bank *bank, int gpio) -{ - void __iomem *reg; - - if (check_gpio(gpio) < 0) - return -EINVAL; - reg = bank->base; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - reg += OMAP_MPUIO_OUTPUT; - break; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_DATA_OUTPUT; - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - reg += OMAP1610_GPIO_DATAOUT; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_DATA_OUTPUT; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - reg += OMAP24XX_GPIO_DATAOUT; - break; -#endif -#ifdef CONFIG_ARCH_OMAP4 - case METHOD_GPIO_44XX: - reg += OMAP4_GPIO_DATAOUT; - break; -#endif - default: - return -EINVAL; - } - - return (__raw_readl(reg) & (1 << get_gpio_index(gpio))) != 0; -} - -#define MOD_REG_BIT(reg, bit_mask, set) \ -do { \ - int l = __raw_readl(base + reg); \ - if (set) l |= bit_mask; \ - else l &= ~bit_mask; \ - __raw_writel(l, base + reg); \ -} while(0) - -/** - * _set_gpio_debounce - low level gpio debounce time - * @bank: the gpio bank we're acting upon - * @gpio: the gpio number on this @gpio - * @debounce: debounce time to use - * - * OMAP's debounce time is in 31us steps so we need - * to convert and round up to the closest unit. - */ -static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio, - unsigned debounce) -{ - void __iomem *reg = bank->base; - u32 val; - u32 l; - - if (debounce < 32) - debounce = 0x01; - else if (debounce > 7936) - debounce = 0xff; - else - debounce = (debounce / 0x1f) - 1; - - l = 1 << get_gpio_index(gpio); - - if (cpu_is_omap44xx()) - reg += OMAP4_GPIO_DEBOUNCINGTIME; - else - reg += OMAP24XX_GPIO_DEBOUNCE_VAL; - - __raw_writel(debounce, reg); - - reg = bank->base; - if (cpu_is_omap44xx()) - reg += OMAP4_GPIO_DEBOUNCENABLE; - else - reg += OMAP24XX_GPIO_DEBOUNCE_EN; - - val = __raw_readl(reg); - - if (debounce) { - val |= l; - if (cpu_is_omap34xx() || cpu_is_omap44xx()) - clk_enable(bank->dbck); - } else { - val &= ~l; - if (cpu_is_omap34xx() || cpu_is_omap44xx()) - clk_disable(bank->dbck); - } - bank->dbck_enable_mask = val; - - __raw_writel(val, reg); -} - -#ifdef CONFIG_ARCH_OMAP2PLUS -static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, - int trigger) -{ - void __iomem *base = bank->base; - u32 gpio_bit = 1 << gpio; - u32 val; - - if (cpu_is_omap44xx()) { - MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT0, gpio_bit, - trigger & IRQ_TYPE_LEVEL_LOW); - MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT1, gpio_bit, - trigger & IRQ_TYPE_LEVEL_HIGH); - MOD_REG_BIT(OMAP4_GPIO_RISINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_RISING); - MOD_REG_BIT(OMAP4_GPIO_FALLINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_FALLING); - } else { - MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit, - trigger & IRQ_TYPE_LEVEL_LOW); - MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit, - trigger & IRQ_TYPE_LEVEL_HIGH); - MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_RISING); - MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_FALLING); - } - if (likely(!(bank->non_wakeup_gpios & gpio_bit))) { - if (cpu_is_omap44xx()) { - if (trigger != 0) - __raw_writel(1 << gpio, bank->base+ - OMAP4_GPIO_IRQWAKEN0); - else { - val = __raw_readl(bank->base + - OMAP4_GPIO_IRQWAKEN0); - __raw_writel(val & (~(1 << gpio)), bank->base + - OMAP4_GPIO_IRQWAKEN0); - } - } else { - /* - * GPIO wakeup request can only be generated on edge - * transitions - */ - if (trigger & IRQ_TYPE_EDGE_BOTH) - __raw_writel(1 << gpio, bank->base - + OMAP24XX_GPIO_SETWKUENA); - else - __raw_writel(1 << gpio, bank->base - + OMAP24XX_GPIO_CLEARWKUENA); - } - } - /* This part needs to be executed always for OMAP34xx */ - if (cpu_is_omap34xx() || (bank->non_wakeup_gpios & gpio_bit)) { - /* - * Log the edge gpio and manually trigger the IRQ - * after resume if the input level changes - * to avoid irq lost during PER RET/OFF mode - * Applies for omap2 non-wakeup gpio and all omap3 gpios - */ - if (trigger & IRQ_TYPE_EDGE_BOTH) - bank->enabled_non_wakeup_gpios |= gpio_bit; - else - bank->enabled_non_wakeup_gpios &= ~gpio_bit; - } - - if (cpu_is_omap44xx()) { - bank->level_mask = - __raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT0) | - __raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT1); - } else { - bank->level_mask = - __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) | - __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1); - } -} -#endif - -#ifdef CONFIG_ARCH_OMAP1 -/* - * This only applies to chips that can't do both rising and falling edge - * detection at once. For all other chips, this function is a noop. - */ -static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio) -{ - void __iomem *reg = bank->base; - u32 l = 0; - - switch (bank->method) { - case METHOD_MPUIO: - reg += OMAP_MPUIO_GPIO_INT_EDGE; - break; -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_INT_CONTROL; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_INT_CONTROL; - break; -#endif - default: - return; - } - - l = __raw_readl(reg); - if ((l >> gpio) & 1) - l &= ~(1 << gpio); - else - l |= 1 << gpio; - - __raw_writel(l, reg); -} -#endif - -static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) -{ - void __iomem *reg = bank->base; - u32 l = 0; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - reg += OMAP_MPUIO_GPIO_INT_EDGE; - l = __raw_readl(reg); - if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) - bank->toggle_mask |= 1 << gpio; - if (trigger & IRQ_TYPE_EDGE_RISING) - l |= 1 << gpio; - else if (trigger & IRQ_TYPE_EDGE_FALLING) - l &= ~(1 << gpio); - else - goto bad; - break; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_INT_CONTROL; - l = __raw_readl(reg); - if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) - bank->toggle_mask |= 1 << gpio; - if (trigger & IRQ_TYPE_EDGE_RISING) - l |= 1 << gpio; - else if (trigger & IRQ_TYPE_EDGE_FALLING) - l &= ~(1 << gpio); - else - goto bad; - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - if (gpio & 0x08) - reg += OMAP1610_GPIO_EDGE_CTRL2; - else - reg += OMAP1610_GPIO_EDGE_CTRL1; - gpio &= 0x07; - l = __raw_readl(reg); - l &= ~(3 << (gpio << 1)); - if (trigger & IRQ_TYPE_EDGE_RISING) - l |= 2 << (gpio << 1); - if (trigger & IRQ_TYPE_EDGE_FALLING) - l |= 1 << (gpio << 1); - if (trigger) - /* Enable wake-up during idle for dynamic tick */ - __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_SET_WAKEUPENA); - else - __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA); - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_INT_CONTROL; - l = __raw_readl(reg); - if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) - bank->toggle_mask |= 1 << gpio; - if (trigger & IRQ_TYPE_EDGE_RISING) - l |= 1 << gpio; - else if (trigger & IRQ_TYPE_EDGE_FALLING) - l &= ~(1 << gpio); - else - goto bad; - break; -#endif -#ifdef CONFIG_ARCH_OMAP2PLUS - case METHOD_GPIO_24XX: - case METHOD_GPIO_44XX: - set_24xx_gpio_triggering(bank, gpio, trigger); - break; -#endif - default: - goto bad; - } - __raw_writel(l, reg); - return 0; -bad: - return -EINVAL; -} - -static int gpio_irq_type(unsigned irq, unsigned type) -{ - struct gpio_bank *bank; - unsigned gpio; - int retval; - unsigned long flags; - - if (!cpu_class_is_omap2() && irq > IH_MPUIO_BASE) - gpio = OMAP_MPUIO(irq - IH_MPUIO_BASE); - else - gpio = irq - IH_GPIO_BASE; - - if (check_gpio(gpio) < 0) - return -EINVAL; - - if (type & ~IRQ_TYPE_SENSE_MASK) - return -EINVAL; - - /* OMAP1 allows only only edge triggering */ - if (!cpu_class_is_omap2() - && (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH))) - return -EINVAL; - - bank = get_irq_chip_data(irq); - spin_lock_irqsave(&bank->lock, flags); - retval = _set_gpio_triggering(bank, get_gpio_index(gpio), type); - if (retval == 0) { - irq_desc[irq].status &= ~IRQ_TYPE_SENSE_MASK; - irq_desc[irq].status |= type; - } - spin_unlock_irqrestore(&bank->lock, flags); - - if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) - __set_irq_handler_unlocked(irq, handle_level_irq); - else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) - __set_irq_handler_unlocked(irq, handle_edge_irq); - - return retval; -} - -static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) -{ - void __iomem *reg = bank->base; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - /* MPUIO irqstatus is reset by reading the status register, - * so do nothing here */ - return; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_INT_STATUS; - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - reg += OMAP1610_GPIO_IRQSTATUS1; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_INT_STATUS; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - reg += OMAP24XX_GPIO_IRQSTATUS1; - break; -#endif -#if defined(CONFIG_ARCH_OMAP4) - case METHOD_GPIO_44XX: - reg += OMAP4_GPIO_IRQSTATUS0; - break; -#endif - default: - WARN_ON(1); - return; - } - __raw_writel(gpio_mask, reg); - - /* Workaround for clearing DSP GPIO interrupts to allow retention */ - if (cpu_is_omap24xx() || cpu_is_omap34xx()) - reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2; - else if (cpu_is_omap44xx()) - reg = bank->base + OMAP4_GPIO_IRQSTATUS1; - - if (cpu_is_omap24xx() || cpu_is_omap34xx() || cpu_is_omap44xx()) { - __raw_writel(gpio_mask, reg); - - /* Flush posted write for the irq status to avoid spurious interrupts */ - __raw_readl(reg); - } -} - -static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio) -{ - _clear_gpio_irqbank(bank, 1 << get_gpio_index(gpio)); -} - -static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank) -{ - void __iomem *reg = bank->base; - int inv = 0; - u32 l; - u32 mask; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - reg += OMAP_MPUIO_GPIO_MASKIT; - mask = 0xffff; - inv = 1; - break; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_INT_MASK; - mask = 0xffff; - inv = 1; - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - reg += OMAP1610_GPIO_IRQENABLE1; - mask = 0xffff; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_INT_MASK; - mask = 0xffffffff; - inv = 1; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - reg += OMAP24XX_GPIO_IRQENABLE1; - mask = 0xffffffff; - break; -#endif -#if defined(CONFIG_ARCH_OMAP4) - case METHOD_GPIO_44XX: - reg += OMAP4_GPIO_IRQSTATUSSET0; - mask = 0xffffffff; - break; -#endif - default: - WARN_ON(1); - return 0; - } - - l = __raw_readl(reg); - if (inv) - l = ~l; - l &= mask; - return l; -} - -static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enable) -{ - void __iomem *reg = bank->base; - u32 l; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - reg += OMAP_MPUIO_GPIO_MASKIT; - l = __raw_readl(reg); - if (enable) - l &= ~(gpio_mask); - else - l |= gpio_mask; - break; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_INT_MASK; - l = __raw_readl(reg); - if (enable) - l &= ~(gpio_mask); - else - l |= gpio_mask; - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - if (enable) - reg += OMAP1610_GPIO_SET_IRQENABLE1; - else - reg += OMAP1610_GPIO_CLEAR_IRQENABLE1; - l = gpio_mask; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_INT_MASK; - l = __raw_readl(reg); - if (enable) - l &= ~(gpio_mask); - else - l |= gpio_mask; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - if (enable) - reg += OMAP24XX_GPIO_SETIRQENABLE1; - else - reg += OMAP24XX_GPIO_CLEARIRQENABLE1; - l = gpio_mask; - break; -#endif -#ifdef CONFIG_ARCH_OMAP4 - case METHOD_GPIO_44XX: - if (enable) - reg += OMAP4_GPIO_IRQSTATUSSET0; - else - reg += OMAP4_GPIO_IRQSTATUSCLR0; - l = gpio_mask; - break; -#endif - default: - WARN_ON(1); - return; - } - __raw_writel(l, reg); -} - -static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable) -{ - _enable_gpio_irqbank(bank, 1 << get_gpio_index(gpio), enable); -} - -/* - * Note that ENAWAKEUP needs to be enabled in GPIO_SYSCONFIG register. - * 1510 does not seem to have a wake-up register. If JTAG is connected - * to the target, system will wake up always on GPIO events. While - * system is running all registered GPIO interrupts need to have wake-up - * enabled. When system is suspended, only selected GPIO interrupts need - * to have wake-up enabled. - */ -static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) -{ - unsigned long uninitialized_var(flags); - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_MPUIO: - case METHOD_GPIO_1610: - spin_lock_irqsave(&bank->lock, flags); - if (enable) - bank->suspend_wakeup |= (1 << gpio); - else - bank->suspend_wakeup &= ~(1 << gpio); - spin_unlock_irqrestore(&bank->lock, flags); - return 0; -#endif -#ifdef CONFIG_ARCH_OMAP2PLUS - case METHOD_GPIO_24XX: - case METHOD_GPIO_44XX: - if (bank->non_wakeup_gpios & (1 << gpio)) { - printk(KERN_ERR "Unable to modify wakeup on " - "non-wakeup GPIO%d\n", - (bank - gpio_bank) * 32 + gpio); - return -EINVAL; - } - spin_lock_irqsave(&bank->lock, flags); - if (enable) - bank->suspend_wakeup |= (1 << gpio); - else - bank->suspend_wakeup &= ~(1 << gpio); - spin_unlock_irqrestore(&bank->lock, flags); - return 0; -#endif - default: - printk(KERN_ERR "Can't enable GPIO wakeup for method %i\n", - bank->method); - return -EINVAL; - } -} - -static void _reset_gpio(struct gpio_bank *bank, int gpio) -{ - _set_gpio_direction(bank, get_gpio_index(gpio), 1); - _set_gpio_irqenable(bank, gpio, 0); - _clear_gpio_irqstatus(bank, gpio); - _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE); -} - -/* Use disable_irq_wake() and enable_irq_wake() functions from drivers */ -static int gpio_wake_enable(unsigned int irq, unsigned int enable) -{ - unsigned int gpio = irq - IH_GPIO_BASE; - struct gpio_bank *bank; - int retval; - - if (check_gpio(gpio) < 0) - return -ENODEV; - bank = get_irq_chip_data(irq); - retval = _set_gpio_wakeup(bank, get_gpio_index(gpio), enable); - - return retval; -} - -static int omap_gpio_request(struct gpio_chip *chip, unsigned offset) -{ - struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip); - unsigned long flags; - - spin_lock_irqsave(&bank->lock, flags); - - /* Set trigger to none. You need to enable the desired trigger with - * request_irq() or set_irq_type(). - */ - _set_gpio_triggering(bank, offset, IRQ_TYPE_NONE); - -#ifdef CONFIG_ARCH_OMAP15XX - if (bank->method == METHOD_GPIO_1510) { - void __iomem *reg; - - /* Claim the pin for MPU */ - reg = bank->base + OMAP1510_GPIO_PIN_CONTROL; - __raw_writel(__raw_readl(reg) | (1 << offset), reg); - } -#endif - if (!cpu_class_is_omap1()) { - if (!bank->mod_usage) { - void __iomem *reg = bank->base; - u32 ctrl; - - if (cpu_is_omap24xx() || cpu_is_omap34xx()) - reg += OMAP24XX_GPIO_CTRL; - else if (cpu_is_omap44xx()) - reg += OMAP4_GPIO_CTRL; - ctrl = __raw_readl(reg); - /* Module is enabled, clocks are not gated */ - ctrl &= 0xFFFFFFFE; - __raw_writel(ctrl, reg); - } - bank->mod_usage |= 1 << offset; - } - spin_unlock_irqrestore(&bank->lock, flags); - - return 0; -} - -static void omap_gpio_free(struct gpio_chip *chip, unsigned offset) -{ - struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip); - unsigned long flags; - - spin_lock_irqsave(&bank->lock, flags); -#ifdef CONFIG_ARCH_OMAP16XX - if (bank->method == METHOD_GPIO_1610) { - /* Disable wake-up during idle for dynamic tick */ - void __iomem *reg = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; - __raw_writel(1 << offset, reg); - } -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - if (bank->method == METHOD_GPIO_24XX) { - /* Disable wake-up during idle for dynamic tick */ - void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA; - __raw_writel(1 << offset, reg); - } -#endif -#ifdef CONFIG_ARCH_OMAP4 - if (bank->method == METHOD_GPIO_44XX) { - /* Disable wake-up during idle for dynamic tick */ - void __iomem *reg = bank->base + OMAP4_GPIO_IRQWAKEN0; - __raw_writel(1 << offset, reg); - } -#endif - if (!cpu_class_is_omap1()) { - bank->mod_usage &= ~(1 << offset); - if (!bank->mod_usage) { - void __iomem *reg = bank->base; - u32 ctrl; - - if (cpu_is_omap24xx() || cpu_is_omap34xx()) - reg += OMAP24XX_GPIO_CTRL; - else if (cpu_is_omap44xx()) - reg += OMAP4_GPIO_CTRL; - ctrl = __raw_readl(reg); - /* Module is disabled, clocks are gated */ - ctrl |= 1; - __raw_writel(ctrl, reg); - } - } - _reset_gpio(bank, bank->chip.base + offset); - spin_unlock_irqrestore(&bank->lock, flags); -} - -/* - * We need to unmask the GPIO bank interrupt as soon as possible to - * avoid missing GPIO interrupts for other lines in the bank. - * Then we need to mask-read-clear-unmask the triggered GPIO lines - * in the bank to avoid missing nested interrupts for a GPIO line. - * If we wait to unmask individual GPIO lines in the bank after the - * line's interrupt handler has been run, we may miss some nested - * interrupts. - */ -static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - void __iomem *isr_reg = NULL; - u32 isr; - unsigned int gpio_irq, gpio_index; - struct gpio_bank *bank; - u32 retrigger = 0; - int unmasked = 0; - - desc->chip->ack(irq); - - bank = get_irq_data(irq); -#ifdef CONFIG_ARCH_OMAP1 - if (bank->method == METHOD_MPUIO) - isr_reg = bank->base + OMAP_MPUIO_GPIO_INT; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - if (bank->method == METHOD_GPIO_1510) - isr_reg = bank->base + OMAP1510_GPIO_INT_STATUS; -#endif -#if defined(CONFIG_ARCH_OMAP16XX) - if (bank->method == METHOD_GPIO_1610) - isr_reg = bank->base + OMAP1610_GPIO_IRQSTATUS1; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - if (bank->method == METHOD_GPIO_7XX) - isr_reg = bank->base + OMAP7XX_GPIO_INT_STATUS; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - if (bank->method == METHOD_GPIO_24XX) - isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1; -#endif -#if defined(CONFIG_ARCH_OMAP4) - if (bank->method == METHOD_GPIO_44XX) - isr_reg = bank->base + OMAP4_GPIO_IRQSTATUS0; -#endif - while(1) { - u32 isr_saved, level_mask = 0; - u32 enabled; - - enabled = _get_gpio_irqbank_mask(bank); - isr_saved = isr = __raw_readl(isr_reg) & enabled; - - if (cpu_is_omap15xx() && (bank->method == METHOD_MPUIO)) - isr &= 0x0000ffff; - - if (cpu_class_is_omap2()) { - level_mask = bank->level_mask & enabled; - } - - /* clear edge sensitive interrupts before handler(s) are - called so that we don't miss any interrupt occurred while - executing them */ - _enable_gpio_irqbank(bank, isr_saved & ~level_mask, 0); - _clear_gpio_irqbank(bank, isr_saved & ~level_mask); - _enable_gpio_irqbank(bank, isr_saved & ~level_mask, 1); - - /* if there is only edge sensitive GPIO pin interrupts - configured, we could unmask GPIO bank interrupt immediately */ - if (!level_mask && !unmasked) { - unmasked = 1; - desc->chip->unmask(irq); - } - - isr |= retrigger; - retrigger = 0; - if (!isr) - break; - - gpio_irq = bank->virtual_irq_start; - for (; isr != 0; isr >>= 1, gpio_irq++) { - gpio_index = get_gpio_index(irq_to_gpio(gpio_irq)); - - if (!(isr & 1)) - continue; - -#ifdef CONFIG_ARCH_OMAP1 - /* - * Some chips can't respond to both rising and falling - * at the same time. If this irq was requested with - * both flags, we need to flip the ICR data for the IRQ - * to respond to the IRQ for the opposite direction. - * This will be indicated in the bank toggle_mask. - */ - if (bank->toggle_mask & (1 << gpio_index)) - _toggle_gpio_edge_triggering(bank, gpio_index); -#endif - - generic_handle_irq(gpio_irq); - } - } - /* if bank has any level sensitive GPIO pin interrupt - configured, we must unmask the bank interrupt only after - handler(s) are executed in order to avoid spurious bank - interrupt */ - if (!unmasked) - desc->chip->unmask(irq); - -} - -static void gpio_irq_shutdown(unsigned int irq) -{ - unsigned int gpio = irq - IH_GPIO_BASE; - struct gpio_bank *bank = get_irq_chip_data(irq); - - _reset_gpio(bank, gpio); -} - -static void gpio_ack_irq(unsigned int irq) -{ - unsigned int gpio = irq - IH_GPIO_BASE; - struct gpio_bank *bank = get_irq_chip_data(irq); - - _clear_gpio_irqstatus(bank, gpio); -} - -static void gpio_mask_irq(unsigned int irq) -{ - unsigned int gpio = irq - IH_GPIO_BASE; - struct gpio_bank *bank = get_irq_chip_data(irq); - - _set_gpio_irqenable(bank, gpio, 0); - _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE); -} - -static void gpio_unmask_irq(unsigned int irq) -{ - unsigned int gpio = irq - IH_GPIO_BASE; - struct gpio_bank *bank = get_irq_chip_data(irq); - unsigned int irq_mask = 1 << get_gpio_index(gpio); - struct irq_desc *desc = irq_to_desc(irq); - u32 trigger = desc->status & IRQ_TYPE_SENSE_MASK; - - if (trigger) - _set_gpio_triggering(bank, get_gpio_index(gpio), trigger); - - /* For level-triggered GPIOs, the clearing must be done after - * the HW source is cleared, thus after the handler has run */ - if (bank->level_mask & irq_mask) { - _set_gpio_irqenable(bank, gpio, 0); - _clear_gpio_irqstatus(bank, gpio); - } - - _set_gpio_irqenable(bank, gpio, 1); -} - -static struct irq_chip gpio_irq_chip = { - .name = "GPIO", - .shutdown = gpio_irq_shutdown, - .ack = gpio_ack_irq, - .mask = gpio_mask_irq, - .unmask = gpio_unmask_irq, - .set_type = gpio_irq_type, - .set_wake = gpio_wake_enable, -}; - -/*---------------------------------------------------------------------*/ - -#ifdef CONFIG_ARCH_OMAP1 - -/* MPUIO uses the always-on 32k clock */ - -static void mpuio_ack_irq(unsigned int irq) -{ - /* The ISR is reset automatically, so do nothing here. */ -} - -static void mpuio_mask_irq(unsigned int irq) -{ - unsigned int gpio = OMAP_MPUIO(irq - IH_MPUIO_BASE); - struct gpio_bank *bank = get_irq_chip_data(irq); - - _set_gpio_irqenable(bank, gpio, 0); -} - -static void mpuio_unmask_irq(unsigned int irq) -{ - unsigned int gpio = OMAP_MPUIO(irq - IH_MPUIO_BASE); - struct gpio_bank *bank = get_irq_chip_data(irq); - - _set_gpio_irqenable(bank, gpio, 1); -} - -static struct irq_chip mpuio_irq_chip = { - .name = "MPUIO", - .ack = mpuio_ack_irq, - .mask = mpuio_mask_irq, - .unmask = mpuio_unmask_irq, - .set_type = gpio_irq_type, -#ifdef CONFIG_ARCH_OMAP16XX - /* REVISIT: assuming only 16xx supports MPUIO wake events */ - .set_wake = gpio_wake_enable, -#endif -}; - - -#define bank_is_mpuio(bank) ((bank)->method == METHOD_MPUIO) - - -#ifdef CONFIG_ARCH_OMAP16XX - -#include <linux/platform_device.h> - -static int omap_mpuio_suspend_noirq(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct gpio_bank *bank = platform_get_drvdata(pdev); - void __iomem *mask_reg = bank->base + OMAP_MPUIO_GPIO_MASKIT; - unsigned long flags; - - spin_lock_irqsave(&bank->lock, flags); - bank->saved_wakeup = __raw_readl(mask_reg); - __raw_writel(0xffff & ~bank->suspend_wakeup, mask_reg); - spin_unlock_irqrestore(&bank->lock, flags); - - return 0; -} - -static int omap_mpuio_resume_noirq(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct gpio_bank *bank = platform_get_drvdata(pdev); - void __iomem *mask_reg = bank->base + OMAP_MPUIO_GPIO_MASKIT; - unsigned long flags; - - spin_lock_irqsave(&bank->lock, flags); - __raw_writel(bank->saved_wakeup, mask_reg); - spin_unlock_irqrestore(&bank->lock, flags); - - return 0; -} - -static const struct dev_pm_ops omap_mpuio_dev_pm_ops = { - .suspend_noirq = omap_mpuio_suspend_noirq, - .resume_noirq = omap_mpuio_resume_noirq, -}; - -/* use platform_driver for this, now that there's no longer any - * point to sys_device (other than not disturbing old code). - */ -static struct platform_driver omap_mpuio_driver = { - .driver = { - .name = "mpuio", - .pm = &omap_mpuio_dev_pm_ops, - }, -}; - -static struct platform_device omap_mpuio_device = { - .name = "mpuio", - .id = -1, - .dev = { - .driver = &omap_mpuio_driver.driver, - } - /* could list the /proc/iomem resources */ -}; - -static inline void mpuio_init(void) -{ - platform_set_drvdata(&omap_mpuio_device, &gpio_bank_1610[0]); - - if (platform_driver_register(&omap_mpuio_driver) == 0) - (void) platform_device_register(&omap_mpuio_device); -} - -#else -static inline void mpuio_init(void) {} -#endif /* 16xx */ - -#else - -extern struct irq_chip mpuio_irq_chip; - -#define bank_is_mpuio(bank) 0 -static inline void mpuio_init(void) {} - -#endif - -/*---------------------------------------------------------------------*/ - -/* REVISIT these are stupid implementations! replace by ones that - * don't switch on METHOD_* and which mostly avoid spinlocks - */ - -static int gpio_input(struct gpio_chip *chip, unsigned offset) -{ - struct gpio_bank *bank; - unsigned long flags; - - bank = container_of(chip, struct gpio_bank, chip); - spin_lock_irqsave(&bank->lock, flags); - _set_gpio_direction(bank, offset, 1); - spin_unlock_irqrestore(&bank->lock, flags); - return 0; -} - -static int gpio_is_input(struct gpio_bank *bank, int mask) -{ - void __iomem *reg = bank->base; - - switch (bank->method) { - case METHOD_MPUIO: - reg += OMAP_MPUIO_IO_CNTL; - break; - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_DIR_CONTROL; - break; - case METHOD_GPIO_1610: - reg += OMAP1610_GPIO_DIRECTION; - break; - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_DIR_CONTROL; - break; - case METHOD_GPIO_24XX: - reg += OMAP24XX_GPIO_OE; - break; - case METHOD_GPIO_44XX: - reg += OMAP4_GPIO_OE; - break; - default: - WARN_ONCE(1, "gpio_is_input: incorrect OMAP GPIO method"); - return -EINVAL; - } - return __raw_readl(reg) & mask; -} - -static int gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct gpio_bank *bank; - void __iomem *reg; - int gpio; - u32 mask; - - gpio = chip->base + offset; - bank = get_gpio_bank(gpio); - reg = bank->base; - mask = 1 << get_gpio_index(gpio); - - if (gpio_is_input(bank, mask)) - return _get_gpio_datain(bank, gpio); - else - return _get_gpio_dataout(bank, gpio); -} - -static int gpio_output(struct gpio_chip *chip, unsigned offset, int value) -{ - struct gpio_bank *bank; - unsigned long flags; - - bank = container_of(chip, struct gpio_bank, chip); - spin_lock_irqsave(&bank->lock, flags); - _set_gpio_dataout(bank, offset, value); - _set_gpio_direction(bank, offset, 0); - spin_unlock_irqrestore(&bank->lock, flags); - return 0; -} - -static int gpio_debounce(struct gpio_chip *chip, unsigned offset, - unsigned debounce) -{ - struct gpio_bank *bank; - unsigned long flags; - - bank = container_of(chip, struct gpio_bank, chip); - spin_lock_irqsave(&bank->lock, flags); - _set_gpio_debounce(bank, offset, debounce); - spin_unlock_irqrestore(&bank->lock, flags); - - return 0; -} - -static void gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - struct gpio_bank *bank; - unsigned long flags; - - bank = container_of(chip, struct gpio_bank, chip); - spin_lock_irqsave(&bank->lock, flags); - _set_gpio_dataout(bank, offset, value); - spin_unlock_irqrestore(&bank->lock, flags); -} - -static int gpio_2irq(struct gpio_chip *chip, unsigned offset) -{ - struct gpio_bank *bank; - - bank = container_of(chip, struct gpio_bank, chip); - return bank->virtual_irq_start + offset; -} - -/*---------------------------------------------------------------------*/ - -static int initialized; -#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP2) -static struct clk * gpio_ick; -#endif - -#if defined(CONFIG_ARCH_OMAP2) -static struct clk * gpio_fck; -#endif - -#if defined(CONFIG_ARCH_OMAP2430) -static struct clk * gpio5_ick; -static struct clk * gpio5_fck; -#endif - -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) -static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS]; -#endif - -static void __init omap_gpio_show_rev(void) -{ - u32 rev; - - if (cpu_is_omap16xx()) - rev = __raw_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION); - else if (cpu_is_omap24xx() || cpu_is_omap34xx()) - rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); - else if (cpu_is_omap44xx()) - rev = __raw_readl(gpio_bank[0].base + OMAP4_GPIO_REVISION); - else - return; - - printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n", - (rev >> 4) & 0x0f, rev & 0x0f); -} - -/* This lock class tells lockdep that GPIO irqs are in a different - * category than their parents, so it won't report false recursion. - */ -static struct lock_class_key gpio_lock_class; - -static int __init _omap_gpio_init(void) -{ - int i; - int gpio = 0; - struct gpio_bank *bank; - int bank_size = SZ_8K; /* Module 4KB + L4 4KB except on omap1 */ - char clk_name[11]; - - initialized = 1; - -#if defined(CONFIG_ARCH_OMAP1) - if (cpu_is_omap15xx()) { - gpio_ick = clk_get(NULL, "arm_gpio_ck"); - if (IS_ERR(gpio_ick)) - printk("Could not get arm_gpio_ck\n"); - else - clk_enable(gpio_ick); - } -#endif -#if defined(CONFIG_ARCH_OMAP2) - if (cpu_class_is_omap2()) { - gpio_ick = clk_get(NULL, "gpios_ick"); - if (IS_ERR(gpio_ick)) - printk("Could not get gpios_ick\n"); - else - clk_enable(gpio_ick); - gpio_fck = clk_get(NULL, "gpios_fck"); - if (IS_ERR(gpio_fck)) - printk("Could not get gpios_fck\n"); - else - clk_enable(gpio_fck); - - /* - * On 2430 & 3430 GPIO 5 uses CORE L4 ICLK - */ -#if defined(CONFIG_ARCH_OMAP2430) - if (cpu_is_omap2430()) { - gpio5_ick = clk_get(NULL, "gpio5_ick"); - if (IS_ERR(gpio5_ick)) - printk("Could not get gpio5_ick\n"); - else - clk_enable(gpio5_ick); - gpio5_fck = clk_get(NULL, "gpio5_fck"); - if (IS_ERR(gpio5_fck)) - printk("Could not get gpio5_fck\n"); - else - clk_enable(gpio5_fck); - } -#endif - } -#endif - -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) - if (cpu_is_omap34xx() || cpu_is_omap44xx()) { - for (i = 0; i < OMAP34XX_NR_GPIOS; i++) { - sprintf(clk_name, "gpio%d_ick", i + 1); - gpio_iclks[i] = clk_get(NULL, clk_name); - if (IS_ERR(gpio_iclks[i])) - printk(KERN_ERR "Could not get %s\n", clk_name); - else - clk_enable(gpio_iclks[i]); - } - } -#endif - - -#ifdef CONFIG_ARCH_OMAP15XX - if (cpu_is_omap15xx()) { - gpio_bank_count = 2; - gpio_bank = gpio_bank_1510; - bank_size = SZ_2K; - } -#endif -#if defined(CONFIG_ARCH_OMAP16XX) - if (cpu_is_omap16xx()) { - gpio_bank_count = 5; - gpio_bank = gpio_bank_1610; - bank_size = SZ_2K; - } -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - if (cpu_is_omap7xx()) { - gpio_bank_count = 7; - gpio_bank = gpio_bank_7xx; - bank_size = SZ_2K; - } -#endif -#ifdef CONFIG_ARCH_OMAP2 - if (cpu_is_omap242x()) { - gpio_bank_count = 4; - gpio_bank = gpio_bank_242x; - } - if (cpu_is_omap243x()) { - gpio_bank_count = 5; - gpio_bank = gpio_bank_243x; - } -#endif -#ifdef CONFIG_ARCH_OMAP3 - if (cpu_is_omap34xx()) { - gpio_bank_count = OMAP34XX_NR_GPIOS; - gpio_bank = gpio_bank_34xx; - } -#endif -#ifdef CONFIG_ARCH_OMAP4 - if (cpu_is_omap44xx()) { - gpio_bank_count = OMAP34XX_NR_GPIOS; - gpio_bank = gpio_bank_44xx; - } -#endif - for (i = 0; i < gpio_bank_count; i++) { - int j, gpio_count = 16; - - bank = &gpio_bank[i]; - spin_lock_init(&bank->lock); - - /* Static mapping, never released */ - bank->base = ioremap(bank->pbase, bank_size); - if (!bank->base) { - printk(KERN_ERR "Could not ioremap gpio bank%i\n", i); - continue; - } - - if (bank_is_mpuio(bank)) - __raw_writew(0xffff, bank->base + OMAP_MPUIO_GPIO_MASKIT); - if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) { - __raw_writew(0xffff, bank->base + OMAP1510_GPIO_INT_MASK); - __raw_writew(0x0000, bank->base + OMAP1510_GPIO_INT_STATUS); - } - if (cpu_is_omap16xx() && bank->method == METHOD_GPIO_1610) { - __raw_writew(0x0000, bank->base + OMAP1610_GPIO_IRQENABLE1); - __raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1); - __raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG); - } - if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) { - __raw_writel(0xffffffff, bank->base + OMAP7XX_GPIO_INT_MASK); - __raw_writel(0x00000000, bank->base + OMAP7XX_GPIO_INT_STATUS); - - gpio_count = 32; /* 7xx has 32-bit GPIOs */ - } - -#ifdef CONFIG_ARCH_OMAP2PLUS - if ((bank->method == METHOD_GPIO_24XX) || - (bank->method == METHOD_GPIO_44XX)) { - static const u32 non_wakeup_gpios[] = { - 0xe203ffc0, 0x08700040 - }; - - if (cpu_is_omap44xx()) { - __raw_writel(0xffffffff, bank->base + - OMAP4_GPIO_IRQSTATUSCLR0); - __raw_writew(0x0015, bank->base + - OMAP4_GPIO_SYSCONFIG); - __raw_writel(0x00000000, bank->base + - OMAP4_GPIO_DEBOUNCENABLE); - /* - * Initialize interface clock ungated, - * module enabled - */ - __raw_writel(0, bank->base + OMAP4_GPIO_CTRL); - } else { - __raw_writel(0x00000000, bank->base + - OMAP24XX_GPIO_IRQENABLE1); - __raw_writel(0xffffffff, bank->base + - OMAP24XX_GPIO_IRQSTATUS1); - __raw_writew(0x0015, bank->base + - OMAP24XX_GPIO_SYSCONFIG); - __raw_writel(0x00000000, bank->base + - OMAP24XX_GPIO_DEBOUNCE_EN); - - /* - * Initialize interface clock ungated, - * module enabled - */ - __raw_writel(0, bank->base + - OMAP24XX_GPIO_CTRL); - } - if (cpu_is_omap24xx() && - i < ARRAY_SIZE(non_wakeup_gpios)) - bank->non_wakeup_gpios = non_wakeup_gpios[i]; - gpio_count = 32; - } -#endif - - bank->mod_usage = 0; - /* REVISIT eventually switch from OMAP-specific gpio structs - * over to the generic ones - */ - bank->chip.request = omap_gpio_request; - bank->chip.free = omap_gpio_free; - bank->chip.direction_input = gpio_input; - bank->chip.get = gpio_get; - bank->chip.direction_output = gpio_output; - bank->chip.set_debounce = gpio_debounce; - bank->chip.set = gpio_set; - bank->chip.to_irq = gpio_2irq; - if (bank_is_mpuio(bank)) { - bank->chip.label = "mpuio"; -#ifdef CONFIG_ARCH_OMAP16XX - bank->chip.dev = &omap_mpuio_device.dev; -#endif - bank->chip.base = OMAP_MPUIO(0); - } else { - bank->chip.label = "gpio"; - bank->chip.base = gpio; - gpio += gpio_count; - } - bank->chip.ngpio = gpio_count; - - gpiochip_add(&bank->chip); - - for (j = bank->virtual_irq_start; - j < bank->virtual_irq_start + gpio_count; j++) { - lockdep_set_class(&irq_desc[j].lock, &gpio_lock_class); - set_irq_chip_data(j, bank); - if (bank_is_mpuio(bank)) - set_irq_chip(j, &mpuio_irq_chip); - else - set_irq_chip(j, &gpio_irq_chip); - set_irq_handler(j, handle_simple_irq); - set_irq_flags(j, IRQF_VALID); - } - set_irq_chained_handler(bank->irq, gpio_irq_handler); - set_irq_data(bank->irq, bank); - - if (cpu_is_omap34xx() || cpu_is_omap44xx()) { - sprintf(clk_name, "gpio%d_dbck", i + 1); - bank->dbck = clk_get(NULL, clk_name); - if (IS_ERR(bank->dbck)) - printk(KERN_ERR "Could not get %s\n", clk_name); - } - } - - /* Enable system clock for GPIO module. - * The CAM_CLK_CTRL *is* really the right place. */ - if (cpu_is_omap16xx()) - omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04, ULPD_CAM_CLK_CTRL); - - /* Enable autoidle for the OCP interface */ - if (cpu_is_omap24xx()) - omap_writel(1 << 0, 0x48019010); - if (cpu_is_omap34xx()) - omap_writel(1 << 0, 0x48306814); - - omap_gpio_show_rev(); - - return 0; -} - -#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS) -static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg) -{ - int i; - - if (!cpu_class_is_omap2() && !cpu_is_omap16xx()) - return 0; - - for (i = 0; i < gpio_bank_count; i++) { - struct gpio_bank *bank = &gpio_bank[i]; - void __iomem *wake_status; - void __iomem *wake_clear; - void __iomem *wake_set; - unsigned long flags; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - wake_status = bank->base + OMAP1610_GPIO_WAKEUPENABLE; - wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; - wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN; - wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; - wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA; - break; -#endif -#ifdef CONFIG_ARCH_OMAP4 - case METHOD_GPIO_44XX: - wake_status = bank->base + OMAP4_GPIO_IRQWAKEN0; - wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0; - wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0; - break; -#endif - default: - continue; - } - - spin_lock_irqsave(&bank->lock, flags); - bank->saved_wakeup = __raw_readl(wake_status); - __raw_writel(0xffffffff, wake_clear); - __raw_writel(bank->suspend_wakeup, wake_set); - spin_unlock_irqrestore(&bank->lock, flags); - } - - return 0; -} - -static int omap_gpio_resume(struct sys_device *dev) -{ - int i; - - if (!cpu_class_is_omap2() && !cpu_is_omap16xx()) - return 0; - - for (i = 0; i < gpio_bank_count; i++) { - struct gpio_bank *bank = &gpio_bank[i]; - void __iomem *wake_clear; - void __iomem *wake_set; - unsigned long flags; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; - wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; - wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA; - break; -#endif -#ifdef CONFIG_ARCH_OMAP4 - case METHOD_GPIO_44XX: - wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0; - wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0; - break; -#endif - default: - continue; - } - - spin_lock_irqsave(&bank->lock, flags); - __raw_writel(0xffffffff, wake_clear); - __raw_writel(bank->saved_wakeup, wake_set); - spin_unlock_irqrestore(&bank->lock, flags); - } - - return 0; -} - -static struct sysdev_class omap_gpio_sysclass = { - .name = "gpio", - .suspend = omap_gpio_suspend, - .resume = omap_gpio_resume, -}; - -static struct sys_device omap_gpio_device = { - .id = 0, - .cls = &omap_gpio_sysclass, -}; - -#endif - -#ifdef CONFIG_ARCH_OMAP2PLUS - -static int workaround_enabled; - -void omap2_gpio_prepare_for_idle(int power_state) -{ - int i, c = 0; - int min = 0; - - if (cpu_is_omap34xx()) - min = 1; - - for (i = min; i < gpio_bank_count; i++) { - struct gpio_bank *bank = &gpio_bank[i]; - u32 l1 = 0, l2 = 0; - int j; - - for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++) - clk_disable(bank->dbck); - - if (power_state > PWRDM_POWER_OFF) - continue; - - /* If going to OFF, remove triggering for all - * non-wakeup GPIOs. Otherwise spurious IRQs will be - * generated. See OMAP2420 Errata item 1.101. */ - if (!(bank->enabled_non_wakeup_gpios)) - continue; - - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - bank->saved_datain = __raw_readl(bank->base + - OMAP24XX_GPIO_DATAIN); - l1 = __raw_readl(bank->base + - OMAP24XX_GPIO_FALLINGDETECT); - l2 = __raw_readl(bank->base + - OMAP24XX_GPIO_RISINGDETECT); - } - - if (cpu_is_omap44xx()) { - bank->saved_datain = __raw_readl(bank->base + - OMAP4_GPIO_DATAIN); - l1 = __raw_readl(bank->base + - OMAP4_GPIO_FALLINGDETECT); - l2 = __raw_readl(bank->base + - OMAP4_GPIO_RISINGDETECT); - } - - bank->saved_fallingdetect = l1; - bank->saved_risingdetect = l2; - l1 &= ~bank->enabled_non_wakeup_gpios; - l2 &= ~bank->enabled_non_wakeup_gpios; - - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - __raw_writel(l1, bank->base + - OMAP24XX_GPIO_FALLINGDETECT); - __raw_writel(l2, bank->base + - OMAP24XX_GPIO_RISINGDETECT); - } - - if (cpu_is_omap44xx()) { - __raw_writel(l1, bank->base + OMAP4_GPIO_FALLINGDETECT); - __raw_writel(l2, bank->base + OMAP4_GPIO_RISINGDETECT); - } - - c++; - } - if (!c) { - workaround_enabled = 0; - return; - } - workaround_enabled = 1; -} - -void omap2_gpio_resume_after_idle(void) -{ - int i; - int min = 0; - - if (cpu_is_omap34xx()) - min = 1; - for (i = min; i < gpio_bank_count; i++) { - struct gpio_bank *bank = &gpio_bank[i]; - u32 l = 0, gen, gen0, gen1; - int j; - - for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++) - clk_enable(bank->dbck); - - if (!workaround_enabled) - continue; - - if (!(bank->enabled_non_wakeup_gpios)) - continue; - - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - __raw_writel(bank->saved_fallingdetect, - bank->base + OMAP24XX_GPIO_FALLINGDETECT); - __raw_writel(bank->saved_risingdetect, - bank->base + OMAP24XX_GPIO_RISINGDETECT); - l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN); - } - - if (cpu_is_omap44xx()) { - __raw_writel(bank->saved_fallingdetect, - bank->base + OMAP4_GPIO_FALLINGDETECT); - __raw_writel(bank->saved_risingdetect, - bank->base + OMAP4_GPIO_RISINGDETECT); - l = __raw_readl(bank->base + OMAP4_GPIO_DATAIN); - } - - /* Check if any of the non-wakeup interrupt GPIOs have changed - * state. If so, generate an IRQ by software. This is - * horribly racy, but it's the best we can do to work around - * this silicon bug. */ - l ^= bank->saved_datain; - l &= bank->enabled_non_wakeup_gpios; - - /* - * No need to generate IRQs for the rising edge for gpio IRQs - * configured with falling edge only; and vice versa. - */ - gen0 = l & bank->saved_fallingdetect; - gen0 &= bank->saved_datain; - - gen1 = l & bank->saved_risingdetect; - gen1 &= ~(bank->saved_datain); - - /* FIXME: Consider GPIO IRQs with level detections properly! */ - gen = l & (~(bank->saved_fallingdetect) & - ~(bank->saved_risingdetect)); - /* Consider all GPIO IRQs needed to be updated */ - gen |= gen0 | gen1; - - if (gen) { - u32 old0, old1; - - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - old0 = __raw_readl(bank->base + - OMAP24XX_GPIO_LEVELDETECT0); - old1 = __raw_readl(bank->base + - OMAP24XX_GPIO_LEVELDETECT1); - __raw_writel(old0 | gen, bank->base + - OMAP24XX_GPIO_LEVELDETECT0); - __raw_writel(old1 | gen, bank->base + - OMAP24XX_GPIO_LEVELDETECT1); - __raw_writel(old0, bank->base + - OMAP24XX_GPIO_LEVELDETECT0); - __raw_writel(old1, bank->base + - OMAP24XX_GPIO_LEVELDETECT1); - } - - if (cpu_is_omap44xx()) { - old0 = __raw_readl(bank->base + - OMAP4_GPIO_LEVELDETECT0); - old1 = __raw_readl(bank->base + - OMAP4_GPIO_LEVELDETECT1); - __raw_writel(old0 | l, bank->base + - OMAP4_GPIO_LEVELDETECT0); - __raw_writel(old1 | l, bank->base + - OMAP4_GPIO_LEVELDETECT1); - __raw_writel(old0, bank->base + - OMAP4_GPIO_LEVELDETECT0); - __raw_writel(old1, bank->base + - OMAP4_GPIO_LEVELDETECT1); - } - } - } - -} - -#endif - -#ifdef CONFIG_ARCH_OMAP3 -/* save the registers of bank 2-6 */ -void omap_gpio_save_context(void) -{ - int i; - - /* saving banks from 2-6 only since GPIO1 is in WKUP */ - for (i = 1; i < gpio_bank_count; i++) { - struct gpio_bank *bank = &gpio_bank[i]; - gpio_context[i].sysconfig = - __raw_readl(bank->base + OMAP24XX_GPIO_SYSCONFIG); - gpio_context[i].irqenable1 = - __raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE1); - gpio_context[i].irqenable2 = - __raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE2); - gpio_context[i].wake_en = - __raw_readl(bank->base + OMAP24XX_GPIO_WAKE_EN); - gpio_context[i].ctrl = - __raw_readl(bank->base + OMAP24XX_GPIO_CTRL); - gpio_context[i].oe = - __raw_readl(bank->base + OMAP24XX_GPIO_OE); - gpio_context[i].leveldetect0 = - __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0); - gpio_context[i].leveldetect1 = - __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1); - gpio_context[i].risingdetect = - __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT); - gpio_context[i].fallingdetect = - __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT); - gpio_context[i].dataout = - __raw_readl(bank->base + OMAP24XX_GPIO_DATAOUT); - } -} - -/* restore the required registers of bank 2-6 */ -void omap_gpio_restore_context(void) -{ - int i; - - for (i = 1; i < gpio_bank_count; i++) { - struct gpio_bank *bank = &gpio_bank[i]; - __raw_writel(gpio_context[i].sysconfig, - bank->base + OMAP24XX_GPIO_SYSCONFIG); - __raw_writel(gpio_context[i].irqenable1, - bank->base + OMAP24XX_GPIO_IRQENABLE1); - __raw_writel(gpio_context[i].irqenable2, - bank->base + OMAP24XX_GPIO_IRQENABLE2); - __raw_writel(gpio_context[i].wake_en, - bank->base + OMAP24XX_GPIO_WAKE_EN); - __raw_writel(gpio_context[i].ctrl, - bank->base + OMAP24XX_GPIO_CTRL); - __raw_writel(gpio_context[i].oe, - bank->base + OMAP24XX_GPIO_OE); - __raw_writel(gpio_context[i].leveldetect0, - bank->base + OMAP24XX_GPIO_LEVELDETECT0); - __raw_writel(gpio_context[i].leveldetect1, - bank->base + OMAP24XX_GPIO_LEVELDETECT1); - __raw_writel(gpio_context[i].risingdetect, - bank->base + OMAP24XX_GPIO_RISINGDETECT); - __raw_writel(gpio_context[i].fallingdetect, - bank->base + OMAP24XX_GPIO_FALLINGDETECT); - __raw_writel(gpio_context[i].dataout, - bank->base + OMAP24XX_GPIO_DATAOUT); - } -} -#endif - -/* - * This may get called early from board specific init - * for boards that have interrupts routed via FPGA. - */ -int __init omap_gpio_init(void) -{ - if (!initialized) - return _omap_gpio_init(); - else - return 0; -} - -static int __init omap_gpio_sysinit(void) -{ - int ret = 0; - - if (!initialized) - ret = _omap_gpio_init(); - - mpuio_init(); - -#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS) - if (cpu_is_omap16xx() || cpu_class_is_omap2()) { - if (ret == 0) { - ret = sysdev_class_register(&omap_gpio_sysclass); - if (ret == 0) - ret = sysdev_register(&omap_gpio_device); - } - } -#endif - - return ret; -} - -arch_initcall(omap_gpio_sysinit); |